Search Results

Search found 1870 results on 75 pages for 'mrjimoy 05'.

Page 35/75 | < Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >

• CentOS - Add additional hard drive raid arrays on Dell Perc 5/i card

  - by Quanano

  We have a Dell Poweredge 2900 system with Dell Perc 5/i card and 4 SAS hard drives attached, with NTFS partitions on them. We installed CentOS on one raid array on this controller with a different controller and it is working fine. We are now trying to access the drives shown above and they are not being shown in /dev as sdb, etc. sda is the drive that we installed centos on and it has sda1, sda2, sda3, etc. The CDROM has been picked up as well. If I scan for scsi devices then the perc and adaptec controllers are both found. sg0 is the CDROM and sg2 is the centos installed, however I think sg1 is the other drive but I cannot see anyway to mount the partitions, as only the drive is listed in /dev. Thanks. EXTRA INFO fdisk -l: Disk /dev/sda: 72.7 GB, 72746008576 bytes 255 heads, 63 sectors/track, 8844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x11e3119f Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 8845 70528000 8e Linux LVM Disk /dev/mapper/vg_lal2server-lv_root: 34.4 GB, 34431041536 bytes 255 heads, 63 sectors/track, 4186 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_root doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_swap: 21.1 GB, 21139292160 bytes 255 heads, 63 sectors/track, 2570 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_swap doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_home: 16.6 GB, 16647192576 bytes 255 heads, 63 sectors/track, 2023 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_home doesn't contain a valid partition table These are all from the install hdd not the additional hard drives modprobe a320raid FATAL: Module a320raid not found. lsscsi -v: [0:0:0:0] cd/dvd TSSTcorp CDRWDVD TS-H492C DE02 /dev/sr0 dir: /sys/bus/scsi/devices/0:0:0:0 [/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0] [4:0:10:0] enclosu DP BACKPLANE 1.05 - dir: /sys/bus/scsi/devices/4:0:10:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:0:10/4:0:10:0] [4:2:0:0] disk DELL PERC 5/i 1.03 /dev/sda dir: /sys/bus/scsi/devices/4:2:0:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:2:0/4:2:0:0] . lsmod: Module Size Used by fuse 66285 0 des_generic 16604 0 ecb 2209 0 md4 3461 0 nls_utf8 1455 0 cifs 278370 0 autofs4 26888 4 ipt_REJECT 2383 0 ip6t_REJECT 4628 2 nf_conntrack_ipv6 8748 2 nf_defrag_ipv6 12182 1 nf_conntrack_ipv6 xt_state 1492 2 nf_conntrack 79453 2 nf_conntrack_ipv6,xt_state ip6table_filter 2889 1 ip6_tables 19458 1 ip6table_filter ipv6 322029 31 ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6 bnx2 79618 0 ses 6859 0 enclosure 8395 1 ses dcdbas 9219 0 serio_raw 4818 0 sg 30124 0 iTCO_wdt 13662 0 iTCO_vendor_support 3088 1 iTCO_wdt i5000_edac 8867 0 edac_core 46773 3 i5000_edac i5k_amb 5105 0 shpchp 33482 0 ext4 364410 3 mbcache 8144 1 ext4 jbd2 88738 1 ext4 sd_mod 39488 3 crc_t10dif 1541 1 sd_mod sr_mod 16228 0 cdrom 39771 1 sr_mod megaraid_sas 77090 2 aic79xx 129492 0 scsi_transport_spi 26151 1 aic79xx pata_acpi 3701 0 ata_generic 3837 0 ata_piix 22846 0 radeon 1023359 1 ttm 70328 1 radeon drm_kms_helper 33236 1 radeon drm 230675 3 radeon,ttm,drm_kms_helper i2c_algo_bit 5762 1 radeon i2c_core 31276 4 radeon,drm_kms_helper,drm,i2c_algo_bit dm_mirror 14101 0 dm_region_hash 12170 1 dm_mirror dm_log 10122 2 dm_mirror,dm_region_hash dm_mod 81500 11 dm_mirror,dm_log blkid: /dev/sda1: UUID="bc4777d9-ae2c-4c58-96ea-cedb342b8338" TYPE="ext4" /dev/sda2: UUID="j2wRZr-Mlko-QWBR-BndC-V2uN-vdhO-iKCuYu" TYPE="LVM2_member" /dev/mapper/vg_lal2server-lv_root: UUID="9238208a-1daf-4c3c-aa9b-469f0387ebee" TYPE="ext4" /dev/mapper/vg_lal2server-lv_swap: UUID="dbefb39c-5871-4bc9-b767-1ef18f12bd3d" TYPE="swap" /dev/mapper/vg_lal2server-lv_home: UUID="ec698993-08b7-443e-84f0-9f9cb31c5da8" TYPE="ext4" dmesg shows: megaraid_sas: fw state:c0000000 megasas: fwstate:c0000000, dis_OCR=0 scsi2 : LSI SAS based MegaRAID driver scsi 2:0:0:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:1:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:2:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:3:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:4:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:5:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:8:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 scsi 2:0:9:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 i.e. the 3 RAID Arrays Seagate Hitatchi and Fujitsu hard drives respectively. FURTHER UPDATE I have installed the megaraid storage manager console and connected to the server. It appears that the two CentOS installation hard drives are OK. The other 6 drives, one raid array of 4 and one raid array of 2 disks. The other drives are listed as (Foreign) Unconfigured Good.

  Read the article

• How can I force Windows 7 to REindex a folder?

  - by Claudiu

  I asked Windows 7 to index my entire "Media" folder. After it was done it'd find anything in there, no problem. Then I reorganized it a bit and moved some folders around, and now it doesn't find things inside those folders anymore. For example, I'm looking at a folder with the files: 01. Ferry Corsten - Shelter Me.mp3 02. Ferry Corsten - Black Velvet.mp3 ... 05. Ferry Corsten - Made Of Love.mp3 ... I type in "Love" in the search box for the current folder, and it doesn't find anything. I checked in "Indexing Options", and this very folder is checked off in there. It seems I just messed up its indexing feature. Any ideas how fix?

  Read the article

• command prompt DIR with wildcard returns unexpected results

  - by Don Dickinson

  I am running 2003 server (latest service pack). When i type this on the command line: dir 2010* or dir 2010*.* i receive this as the result: 02/01/2011 02:34 PM 2,460 2011-02-01-14-34-23-807.mdn 02/02/2011 08:59 AM 3,757 2011-02-02-08-59-32-604.req 02/01/2011 09:16 AM 235 2011-02-01-09-16-35-104.dat 02/02/2011 05:06 PM 460 2011-02-02-17-06-05-166.log 02/01/2011 03:31 PM 66,570 2011-02-01-15-31-27-838.dat 02/01/2011 03:16 PM 145 2011-02-01-15-16-51-135.log 02/01/2011 08:52 PM 1,608,916 2011-02-01-20-52-57-416.req 7 File(s) 1,682,543 bytes 0 Dir(s) 42,891,452,416 bytes free can anyone tell me why? i was expecting to see a list of only files that begin with "2010". there are no such files in the directory, so i wasn't expecting to see anything. i must either misunderstand how DIR handles wildcards or i'm doing something stupid.

  Read the article

• Where is debian storing its network settings?

  - by user13743

  I have a debian machine that is supposed to have a static ip, but insists on getting its address from the DHCP server. Here's this settings file: $> cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet static address 192.168.1.99 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 Yet $> sudo /etc/init.d/networking restart Reconfiguring network interfaces...done. $> sudo ifconfig eth0 Link encap:Ethernet HWaddr 00:e0:03:09:05:2e inet addr:192.168.1.205 Bcast:255.255.255.255 Mask:255.255.255.0 ... Where is it being told to use dhcp?

  Read the article

• Arch Linux shows a blinking cursor instead of a booting installer

  - by fakedrake

  Arch Linux shows a blinking cursor instead of a booting installer. I ran sudo dd if=archlinux-2010.05-core-i686.iso of=/dev/sdb1 and checked the MD5 sums. I tried to boot it on two different PCs and got the same result: instead of booting GRUB — or anything useful, for that matter — it just showed a blinking cursor at the top left corner of the screen. The machines became unresponsive to any kind of input, the flash drive LED didn't seem to blink or shiver at all and there seemed to be no other activity whatsoever. I tried using another flash drive, but the machine completely ignored it, booting Windows "normally."

  Read the article

• How can I open PowerShell via AutoHotkey?

  - by Ryan

  I'm running AutoHotkey 1.0.48.05 on Windows 7. I'd like CTRL-ALT-P to open PowerShell. This is what I have so far: ^!p:: Run %SystemRoot%\system32\WindowsPowerShell\v1.0\powershell.exe Return This is the error I get: File C:\Users[username]\Documents\WindowsPowerShell\profile.ps1 cannot be loaded because the execution of scripts is disabled on this system. Please see "get-help about_signing" for more details. I've already set the execution policy to RemoteSigned by opening PowerShell ISE as Administrator and running Set-ExecutionPolicy RemoteSigned. (See http://technet.microsoft.com/en-us/library/ee176949.aspx) How can I get around this problem?

  Read the article

• kloxo setup error

  - by ron

  Hi, i've just purchased vps from 2host, its unmanaged. the support told me to install kloxo. However i got the ff errors in step 1: --begin-- root@vpshostingtips:~# wget http:// download.lxlabs . com/download/kloxo/production/kloxo-install-master.sh --2010-05-06 04:17:04-- http:// download.lxlabs . com/download/kloxo/production/kloxo-inst all-master.sh Resolving download.lxlabs.com... failed: Temporary failure in name resolution. wget: unable to resolve host address `download.lxlabs.com' root@vpshostingtips:~# --end-- Note: i split the hyperlinks intentionally to post here can somebody tell me whats the reason for error? sorry so new to vps.

  Read the article

• How can I share files from my Windows 7 machine to my friend's Ubuntu machine?

  - by ProfKaos

  I run a Windows 7 Pro SP1 laptop as my home machine, and my housemate runs an Ubuntu 12.04.1.05 desktop. We share a WLAN. I would like to make certain locations and files available for him to read and maybe write. How can I go about this? Bearing in mind I have very little recent experience with modern Linux, and Ubuntu in particular. My first idea is to share a Windows folder with my Ubuntu VM under VMWare Player, then his Ubuntu machine can connect to my Unbuntu VM, and the two can use whatever magic Ubuntu uses to achieve file sharing. This requires my Ubuntu VM to be always running though, and that may not always be possible. I have also heard that Samba may have a feature to help here, but I know nothing about that. How can I share my Windows files with my mate's Ubuntu machine, preferably with a 1 to 1 connection, i.e. rather not using shim VM's

  Read the article

• How to remove bad disk from LVM2 with the less data loss on other PVs?

  - by Walkman

  I had a LVM2 volume with two disks. The larger disk became corrupt, so I cant pvmove. What is the best way to remove it from the group to save the most data from the other disk? Here is my pvdisplay output: Couldn't find device with uuid WWeM0m-MLX2-o0da-tf7q-fJJu-eiGl-e7UmM3. --- Physical volume --- PV Name unknown device VG Name media PV Size 1,82 TiB / not usable 1,05 MiB Allocatable yes (but full) PE Size 4,00 MiB Total PE 476932 Free PE 0 Allocated PE 476932 PV UUID WWeM0m-MLX2-o0da-tf7q-fJJu-eiGl-e7UmM3 --- Physical volume --- PV Name /dev/sdb1 VG Name media PV Size 931,51 GiB / not usable 3,19 MiB Allocatable yes (but full) PE Size 4,00 MiB Total PE 238466 Free PE 0 Allocated PE 238466 PV UUID oUhOcR-uYjc-rNTv-LNBm-Z9VY-TJJ5-SYezce So I want to remove the unknown device (not present in the system). Is it possible to do this without a new disk ? The filesystem is ext4.

  Read the article

• Debian 5.0.8 won't detect my ethernet adapter

  - by PaulH

  I'm installing Debian 5.0.8 on a Dell Latitude E6410 using the network install x86 CD. Unfortunately, it won't detect my Ethernet adapter. Specifically, I get the error: No Ethernet card was detected. If you know the name of the driver needed by your Ethernet card, you can select it from the list. lspci shows: 00:19.0 Ethernet controller: Intel Corporation Device 10ea (rev 05) That should correspond to the e100e driver. But, if I select it from the list, the install CD still fails to detect it. Ubuntu 10.10 and Windows 7 are able to use this device with no problem. Does anybody know what I can do to make Debian use my Ethernet adapter? Thanks, PaulH

  Read the article

• Sending a file to uCLinux

  - by Mike

  I have a board running uClinux, and I need to send a file to it, but I'm not sure how... I have a RS232 port, and Ethernet port with an IP address at my disposal, I can telnet to the board, but uCLinux doesn't have a built in FTP client. What sort of options do I have here for transferring files from my Windows 7 (or OpenSUSE) machine(s) to this board? EDIT I just found I have a TFTP server on it: # tftp BusyBox v0.60.5 (2012.07.09-14:05+0000) multi-call binary Usage: tftp [OPTION]... HOST [PORT] But I can't find any good information on how to use TFTP. And looking around google I'm seeing it's good for loading binary images, so I'm assume anything could be sent, but I'm not sure.

  Read the article

• Multiple Graphics Cards on Fedora 15 (Gnome 3)

  - by Michael

  I have the (delightful) misfortune of having 3 graphics cards. They are XFX Radeon 5750s. Each drives 2 monitors via dvi. I am having a really hard time getting these running on fedora 15 (gnome 3). So my setup is 3 columns of 2 monitors (the upper monitor is mounted upside down in each column to reduce the bezel between monitors). When the (graphical) login screen comes up all 6 have the blue stripey background that must be the default, but then when I login, things get interesting. In the xorg.conf below, you will see only 2 of the screens in the serverlayout while the other 4 are commented out. Logging in with only 2 of the screens active works well (and it even remembers that the top one is upside down, and should be considered above the lower, i am not sure where it stores this info, but i set it using the graphical "Displays" settings) However, as soon as I uncomment a third screen, or more, it gives me an error message when I login. It's one of those friendly, less helpful messages (Oh no! Something has gone wrong. A problem has occurred and the system can't recover. Please log out and try again). If i do not use an xorg.conf, then the "Displays" prefs pane shows only the two monitors on one of my graphics cards Thanks to anyone who can help me get going! (xorg.conf and then lspci below, and xorg log) xorg.conf Section "ServerLayout" Identifier "X.org Configured" Screen "Screen0" 0 0 Screen "Screen1" Below "Screen0" # Screen "Screen2" RightOf "Screen0" # Screen "Screen3" RightOf "Screen1" # Screen "Screen4" RightOf "Screen3" # Screen "Screen5" RightOf "Screen4" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "catalogue:/etc/X11/fontpath.d" FontPath "built-ins" EndSection Section "Module" Load "record" Load "dri" Load "dbe" Load "extmod" Load "dri2" Load "glx" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor3" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor4" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor5" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" Identifier "Card0" Driver "radeon" BusID "PCI:4:0:0" EndSection Section "Device" Identifier "Card1" Driver "radeon" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Card2" Driver "radeon" BusID "PCI:6:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Card0" Monitor "Monitor1" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Card1" Monitor "Monitor2" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen3" Device "Card1" Monitor "Monitor3" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen4" Device "Card2" Monitor "Monitor4" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen5" Device "Card2" Monitor "Monitor5" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection lspci output follows [tgm@tgm ~]$ lspci 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 02:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 03:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 03:02.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 04:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 04:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 05:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 05:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 06:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 06:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) xorg log (posted to fpaste due to how long it is. thanks to marcusw for the request) http://www.fpaste.org/r5ww/ xorg log with all 6 monitors enabled in xorg.conf (they all turn on and have blue, but then one gets the aforementioned user-friendly error message). http://www.fpaste.org/X63H/

  Read the article

• VirtualBox error with Ubuntu virtual machine

  - by user2985363

  I am trying to work on a coding project and cannot open my Ubuntu virtual machine with Oracle VM VirtualBox. I took a snapshot yesterday at about 11, and it was working fine. Several times I closed and reopened it. Today when I tried to open it, I kept getting the error below. Failed to open a session for the virtual machine Ubuntu 12.04 32-bit. VM cannot start because the saved state file 'C:\Users\Tyler\VirtualBox VMs\Ubuntu 12.04 32-bit\Snapshots\2014-01-30T19-59-05-976647800Z.sav' is invalid (VERR_FILE_NOT_FOUND). Deleted the saved state prior to starting the VM. I tried deleting the file as it said, but none of the snapshots would open still. The file is still in my recycling bin. What can I do? Also, I took the 1/31 snapshot today before I deleted the previous one.

  Read the article

• Someone try to hack my site, want to understand the log

  - by garconcn

  I have a wordpress site hosted on CentOS 6. After see the following access log, I checked the server, it seems ok. Can anyone explain what does this guy trying to do? Did they get what they want? I have disabled allow_url_include, and restricted open_basedir to web dir and tmp(/etc is not in the path). 190.26.208.130 - - [05/Sep/2012:21:24:42 -0700] "POST http://my_ip/?-d%20allow_url_include%3DOn+-d%20auto_prepend_file%3D../../../../../../../../../../../../etc/passwd%00%20-n/?-d%20allow_url_include%3DOn+-d%20auto_prepend_file%3D../../../../../../../../../../../../etc/passwd%00%20-n HTTP/1.1" 200 32656 "-" "Mozilla/5.0"

  Read the article

• Sorting Files into Subfolders based on EXIF Date

  - by honestor

  I have a huge directory from a HDD recovery that contains 70000+ JPEG files. I tried playing around with some AppleScripts, that I found, but had no luck. I already installed EXIFtool, which might be useful for this task. The current directory structure is as follows: dir001 - file0001.jpg ... - file9999.jpg dir002 - file0001.jpg ... - file9999.jpg ... dir070 - file0001.jpg - ... - file9999.jpg The files mostly have EXIF Data, but sometimes there are Files without metadata. Now I hope to be able to sort and rename these files into folders based on the date: 1999 - 1999 01 31 - 1999_01_31_-_22_59_59.jpg 2000 - 2000 05 20 - 2000_05_20_-_21_59_59.jpg - 2000_05_20_-_22_59_59.jpg I figured Applescript/Automator might come in handy for this, however every other solution would be welcome, too!

  Read the article

• VMWare Lab Manager: What's the best way to build Library Configurations?

  - by mcohen75

  We're using Lab Manager within our QA group. We use it to quickly deliver environments we need for testing. We have 25 Templates, 14 Library Configurations and counting. To build up our templates we: Create a base template that is a bare bones version of Server 2008 + basic configuration (Windows Update, Firewall exceptions) Create a linked clone for each Server template we need (SQL Server 08, 05, etc) Repeat for other OS's, like Windows 7 and Windows XP Then we create configurations: Create a workspace configuration with multiple images in it (Say Server 08 w/SQL Server and Windows 7) Deploy the configuration and make some minor configuration changes Undeploy and Capture to Library How do we keep this manageable? When I need to update a configuration, should I: Rebuild it from templates Clone it to a workspace, make changes, recapture it to the library keep the configuration in my workspace (don't delete it after capturing it to library), deploy it to make changes and then re-capture to library

  Read the article

• Random TCP Resets

  - by allenwei

  We got randomly TCP "reset" error when we send request to remote server. Log from remote server Cisco TCP Connection Terminated,Nov 05 14:43:39 EST: %ASA-session-6-302014: Teardown TCP connection 640068283 for Outside:xxxx to xxxx duration 0:00:00 bytes 4160 TCP Reset-O One my local machine I saw when I use netstat 100703 connections reset due to unexpected data 324186 connections reset due to early user close I also use tcpdump to see what's wrong with it, I saw xxxx.https: Flags [R.], seq 290, ack 1369, win 136, options [nop,nop,TS val 2871790533 ecr 1897173283], length 0 The problem just happened today, we didn't change anything on our server. Anyone know what's wrong with it? Is it related to code we wrote send out request or related to linux configuration?

  Read the article

• Running nph-script.cgi keeps outputting Server details at the end

  - by wgewweg

  I am running a nph-script.cgi on my server. The server keeps adding HTTP/1.1 200 OK Date: Thu, 05 Nov 2009 02:28:53 GMT Server: Apache/2.2.8 (Ubuntu) PHP/5.2.8-1hardy~ppa1 with Suhosin-Patch mod_perl/2.0.3 Perl/v5.8.8 Content-Length: 0 Keep-Alive: timeout=15, max=100 Connection: Keep-Alive Content-Type: text/plain X-Pad: avoid browser bug At the bottom of each page loaded via the .cgi script. why is this the case? How do I remove this annoying message that is appended to all pages ?

  Read the article

• Access logs show someone "GET"ing a random ip, why does this return 200?

  - by Wilduck

  I have a small linux box set up with Apache as a way to teach myself Apache. I've set up port forwarding on my router so it's accessible from the outside world, and I've gotten a few strange requests for pages that don't exist from an ip address in China. Looking at my access_log shows that most of these return 404 errors, which I'm guessing is a good thing. However, there is one request that looks like this: 58.218.204.110 - - [25/Dec/2010:19:05:25 -600] "GET http://173.201.161.57/ HTTP/1.1" 200 3895 I'm curious what this request means... That ip address is unconnected to my server as far as I know, and visiting it simply tells me information about my uid. So, my questions are: How is it that this request is showing up in my access_log, why is it returning 200, and is this a bad thing (do I need to set up more security)?

  Read the article

• Running a cronjob

  - by Ed01

  've been puzzling over cronjobs for the last few hours. I've read documentation and examples. I understand the basics and concepts, but haven't gotten anything to work. So I would appreciate some help with this total noob dilemma. The ultimate goal is to schedule the execution of a django function every day. Before I get that far, I want to know that I can schedule any old script to run, first once, then on a regular basis. So I want to: 1) Write a simple script (perhaps a bash script) that will allow me to determine that yes, it did indeed run successfully, or that it failed. 2) schedule this script to run at the top of the hour I tried writing a bash script that simple output some text to the terminal: #!/bin/bash echo "The script ran" Then I dropped this into a .txt file MAILTO = *****.******@gmail.com 05 * * * * /home/vadmin/development/test.sh But nothing happened. I'm sure I did many things wrong. Where do I start to fix all of this?

  Read the article

• java.util.zip.ZipException in Glassfish (v3) application deployment

  - by Kevin

  Hello, I've got a strange exception with my EJB3.1 application, a ZipException is thrown during the application deployment: [#|2010-05-15T16:01:44.688+0100|SEVERE|glassfish3.0.1|javax.enterprise.system.container.web.org.glassfish.web.loader|_ThreadID=22;_ThreadName=Thread-1;|WEB9051: Error trying to scan the classes at /Users/kevin/Documents/netbeans/WebAlbums/trunk/WebAlbums3/WebAlbums3-ea/dist/gfdeploy/WebAlbums3-Service.jar for annotations in which a ServletContainerInitializer has expressed interest java.util.zip.ZipException: error in opening zip file at java.util.zip.ZipFile.open(Native Method) at java.util.zip.ZipFile.<init>(ZipFile.java:114) at java.util.jar.JarFile.<init>(JarFile.java:133) at java.util.jar.JarFile.<init>(JarFile.java:70) at org.glassfish.web.loader.ServletContainerInitializerUtil.getInitializerList(ServletContainerInitializerUtil.java:255) at org.apache.catalina.core.StandardContext.callServletContainerInitializers(StandardContext.java:5331) at com.sun.enterprise.web.WebModule.callServletContainerInitializers(WebModule.java:550) at org.apache.catalina.core.StandardContext.start(StandardContext.java:5263) at com.sun.enterprise.web.WebModule.start(WebModule.java:499) at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:928) at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:912) at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:694) at com.sun.enterprise.web.WebContainer.loadWebModule(WebContainer.java:1947) at com.sun.enterprise.web.WebContainer.loadWebModule(WebContainer.java:1619) at com.sun.enterprise.web.WebApplication.start(WebApplication.java:90) at org.glassfish.internal.data.EngineRef.start(EngineRef.java:126) at org.glassfish.internal.data.ModuleInfo.start(ModuleInfo.java:241) at org.glassfish.internal.data.ApplicationInfo.start(ApplicationInfo.java:236) at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:339) at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:183) at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:272) at com.sun.enterprise.v3.admin.CommandRunnerImpl$1.execute(CommandRunnerImpl.java:305) at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:320) at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1176) at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$900(CommandRunnerImpl.java:83) at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1235) at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1224) at com.sun.enterprise.v3.admin.AdminAdapter.doCommand(AdminAdapter.java:365) at com.sun.enterprise.v3.admin.AdminAdapter.service(AdminAdapter.java:204) at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166) at com.sun.enterprise.v3.server.HK2Dispatcher.dispath(HK2Dispatcher.java:100) at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:245) at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:791) at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693) at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954) at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:170) at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:135) at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:102) at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:88) at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:76) at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:53) at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:57) at com.sun.grizzly.ContextTask.run(ContextTask.java:69) at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:330) at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:309) at java.lang.Thread.run(Thread.java:637) |#] I don't really know how to investigate this error; I know that it's not related to the glassfish installation (same problem on Ubuntu and Mac) ... I spot a 'null' in the classpath definition (log level fine), maybe that's the reason, but I don't know how to get rid of it ... [#|2010-05-15T16:01:44.672+0100|FINE|glassfish3.0.1|javax.enterprise.system.container.web.com.sun.enterprise.web|_ThreadID=22;_ThreadName=Thread-1;ClassName=com.sun.enterprise.web.WebModuleListener;MethodName=configureJsp;| sysClasspath for WebAlbums3-ea#WebAlbums3-Servlet.war is /Users/kevin/apps/glassfishv3/glassfish/modules/antlr-repackaged.jar:...:/Users/kevin/apps/glassfishv3/glassfish/modules/gf-client-module.jar:/Users/kevin/apps/glassfishv3/glassfish/modules/javax.security.auth.message.jar:null:/Users/kevin/apps/glassfishv3/glassfish/modules/org.eclipse.persistence.antlr.jar:/Users/kevin/apps/glassfishv3/glassfish/domains/domain1/lib/classes:/Users/kevin/apps/glassfishv3/glassfish/domains/domain1/lib/RT-DB-mysql-connector-java-5.1.12-bin.jar:|#] (I'm using Netbeans 6.8, Glassfish v3, Servlet3, EJB 3.1, JPA/Hibernate) Thank you for your help

  Read the article

• Parsing GeoRSS Feed with jQuery

  - by senfo

  I'm attempting to use the jQuery jFeed plugin for parsing an Atom, GeoRSS feed and I'm running into issues extracting the information I need. For example, I need to extract the summary element and I would like to render the contents in a div on my HTML page. Additionally, I'd like to extract the contents from the georss:point elements and pass them into Google Maps to render them as points on a map. The problem is that it seems jFeed is stripping out the GeoRSS-related information. For example, I can extract the title element without issues, but it seems it doesn't extract the summary or georss:point elements, at all. Following is a snippet of the XML I'm working with: <feed xmlns="http://www.w3.org/2005/Atom" xmlns:georss="http://www.georss.org/georss"> <title>Search Results from DataWarehouse.HRSA.gov</title> <link rel="self" href="http://datawarehouse.hrsa.gov/HGDWDataWebService/HGDWDataService.aspx?service=HC&zip=20002&radius=10"/> <link rel="alternate" href="http://datawarehouse.hrsa.gov/"/> <author> <name>HRSA Geospatial Data Warehouse</name> </author> <id>tag:datawarehouse.hrsa.gov,2010-04-05:/</id> <updated>2010-04-05T19:25:28-05:00</updated> <entry> <title>Christ House</title> <link href="http://www.christhouse.org" /> <id>tag:datawarehouse.hrsa.gov,2010-04-05:/D388C4C6-FFA4-4091-819B-64D67DC64931</id> <summary type="xhtml"> <div xmlns="http://www.w3.org/1999/xhtml"> <div class="vcard"> <div class="fn org">Christ House</div> <div class="adr"> <div class="street-address">1717 Columbia Rd. N.W.</div> <span class="locality">Washington</span>, <span class="region">District of Columbia</span>, <span class="postal-code">20009-2803</span> </div> <div class="tel">202-328-1100</div> </div> <div> Categories: <span class="category">Service Delivery Site</span> </div> </div> </summary> <georss:point>38.9243636363636 -77.0395636363637</georss:point> <updated>2010-04-04T00:00:00-05:00</updated> </entry> </feed> Following is the jQuery code that I'm using: $(document).ready(function() { $.getFeed({ //url: 'http://datawarehouse.hrsa.gov/HGDWDataWebService/HGDWDataService.aspx?service=HC&zip=20002&radius=10', url: 'test.xml', success: function(feed) { $.each(feed.items, function(index, value) { $('#rssContent').append(value.title); // Set breakpoint here }); } }); }); I set a breakpoint on the line that appends to the rssContent div and noticed the objects in feed.items don't have the properties I'm after. Am I doing something wrong or was jFeed simply not designed to work the way I want it to?

  Read the article

• Input string was not in a correct format.

  - by Jon

  I have this error which doesn't happen on my local machine but it does when the code is built by our build sever and deployed to the target server. I can't work out what the problem is, after having spent many hours on this issue. Here is an error trace: [FormatException: Input string was not in a correct format.] System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal) +7469351 System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info) +119 System.Byte.Parse(String s, NumberStyles style, NumberFormatInfo info) +35 System.String.System.IConvertible.ToByte(IFormatProvider provider) +46 System.Convert.ChangeType(Object value, TypeCode typeCode, IFormatProvider provider) +199 System.Web.UI.WebControls.Parameter.GetValue(Object value, String defaultValue, TypeCode type, Boolean convertEmptyStringToNull, Boolean ignoreNullableTypeChanges) +127 System.Web.UI.WebControls.Parameter.GetValue(Object value, Boolean ignoreNullableTypeChanges) +66 System.Web.UI.WebControls.ParameterCollection.GetValues(HttpContext context, Control control) +285 System.Web.UI.WebControls.SqlDataSourceView.InitializeParameters(DbCommand command, ParameterCollection parameters, IDictionary exclusionList) +251 System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +476 System.Web.UI.WebControls.SqlDataSource.Select(DataSourceSelectArguments arguments) +19 Customer_NewTenancyList.BindReport(GridSortEventArgs e) +442 Customer_NewTenancyList.Page_Load(Object sender, EventArgs e) +345 System.Web.UI.Control.OnLoad(EventArgs e) +73 baseRslpage.OnLoad(EventArgs e) +16 System.Web.UI.Control.LoadRecursive() +52 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2170 Here is my own trace: Begin PreInit aspx.page End PreInit 3.12888928620816E-05 0.000031 aspx.page Begin Init 7.43111205474439E-05 0.000043 aspx.page End Init 0.00122138428208054 0.001147 aspx.page Begin InitComplete 0.00125379063540199 0.000032 aspx.page End InitComplete 0.00127781603527823 0.000024 aspx.page Begin PreLoad 0.00131022238859967 0.000032 aspx.page End PreLoad 0.00133424778847591 0.000024 aspx.page Begin Load 0.00135575890231859 0.000022 Page_Load 0.00145996209015392 0.000104 BindReport 0.0014856636807192 0.000026 Parameters add start: 30/03/2010 30/04/2010 0.0015569017850034 0.000071 Parameters add ended 0.00160048274291844 0.000044 Trace 1 0.00162450814279468 0.000024 Unhandled Execution Error Input string was not in a correct format. at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal) at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info) at System.Byte.Parse(String s, NumberStyles style, NumberFormatInfo info) at System.String.System.IConvertible.ToByte(IFormatProvider provider) at System.Convert.ChangeType(Object value, TypeCode typeCode, IFormatProvider provider) at System.Web.UI.WebControls.Parameter.GetValue(Object value, String defaultValue, TypeCode type, Boolean convertEmptyStringToNull, Boolean ignoreNullableTypeChanges) at System.Web.UI.WebControls.Parameter.GetValue(Object value, Boolean ignoreNullableTypeChanges) at System.Web.UI.WebControls.ParameterCollection.GetValues(HttpContext context, Control control) at System.Web.UI.WebControls.SqlDataSourceView.InitializeParameters(DbCommand command, ParameterCollection parameters, IDictionary exclusionList) at System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) at System.Web.UI.WebControls.SqlDataSource.Select(DataSourceSelectArguments arguments) at Customer_NewTenancyList.BindReport(GridSortEventArgs e) at Customer_NewTenancyList.Page_Load(Object sender, EventArgs e) at System.Web.UI.Control.OnLoad(EventArgs e) at baseRslpage.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) And here is my code: Trace.Warn("BindReport") Dim sds As New SqlDataSource sds.SelectCommand = "C_MYSTORED_PROC" sds.ConnectionString = ConfigurationManager.ConnectionStrings("connstring").ConnectionString sds.SelectCommandType = SqlDataSourceCommandType.StoredProcedure Trace.Warn(String.Format("Parameters add start: {0} {1}", dpFrom.Text, dpTo.Text)) sds.SelectParameters.Add(New Parameter("FROMDATE", DbType.DateTime, dpFrom.Text)) sds.SelectParameters.Add(New Parameter("TODATE", DbType.DateTime, dpTo.Text)) Trace.Warn("Parameters add ended") Dim dv As DataView Dim dt As DataTable Trace.Warn("Trace 1") dv = sds.Select(New DataSourceSelectArguments()) Trace.Warn("Trace 2") If e IsNot Nothing Then dv.Sort = String.Format("{0} {1}", e.SortField, e.SortDirection) Trace.Warn("Trace 3") Else gvReport.CurrentSortColumnIndex = 0 gvReport.Columns(0).SortDirection = "DESC" Trace.Warn("Trace 4") End If Trace.Warn("Trace 5") dt = dv.ToTable() Cache("NewTenancyList") = dt Trace.Warn("Trace 6") Trace.Warn("About to databind") gvReport.DataSource = dt gvReport.DataBind() Trace.Warn("Databinded") What I don't understand and this is really weird, why does it work on my local machine but not on the live server? If i build the code on my local machine then copy over the complete \bin directory it works. If I pull the code from source safe, build then copy, I get this error. It seems to choke after the line "dv = sds.Select(New DataSourceSelectArguments())" in the code.

  Read the article

• How to query with the datetime value using LINQ to XML ?

  - by Shailesh Jaiswal

  I am developing window phone 7 application in silverlight. I am new to the silverlight. I am also new to LINQ to XML. In my application the user select the date & submit some transaction details into the application. The details gets stored in XML File. I am using the custom date control in my application for the date selection as follows private void DatePicker_ValueChanged(object sender, DateTimeValueChangedEventArgs e) { AppObj = Application.Current as App; AppObj.date = (DateTime)EntryDate.Value; } Then the value of AppObj.date gets stored in the XML file. Sometimes I use the DateTime.Now to store the date in the XML File. Now I want to generate the report of submitted transaction details by querying through LINQ to XML. I want to generate the report for today's date, current week & current month. For this purpose I am using the following code public void GetTransactionObjects(String strXMLFile, DateTime VDateTime) { XDocument doc = null; XMLFileManager XMLDocObj = new XMLFileManager(); doc = XMLDocObj.LoadXMLFile(strXMLFile); var vTransaction = from s in doc.Descendants("Transaction") .Where(x => x.Element("Current_Date").Value == VDateTime.ToShortDateString()) select new Transaction(s); this.Clear(); AddRange(vTransaction); } The Transaction class contains the following constructor. public Transaction(XElement xElement) { Transaction_ID = Convert.ToInt32(xElement.Element("Transaction_ID").Value.ToString()); TransactionType_ID = Convert.ToInt32(xElement.Element("TransactionType_ID").Value.ToString()); Alphabet_ID = Convert.ToInt32(xElement.Element("Alphabet_ID").Value.ToString()); ID = Convert.ToInt32(xElement.Element("ID").Value.ToString()); SubCategory_ID = Convert.ToInt32(xElement.Element("SubCategory_ID").Value.ToString()); Item_ID = Convert.ToInt32(xElement.Element("Item_ID").Value.ToString()); Currency_ID = Convert.ToInt32(xElement.Element("Currency_ID").Value.ToString()); InputTypeMethod_ID = Convert.ToInt32(xElement.Element("InputTypeMethod_ID").Value.ToString()); Principle = Convert.ToInt32(xElement.Element("InputTypeMethod_ID").Value.ToString()); Interest = Convert.ToInt32(xElement.Element("Interest").Value.ToString()); ROI = Convert.ToInt32(xElement.Element("InputTypeMethod_ID").Value.ToString()); Amount = Convert.ToInt32(xElement.Element("InputTypeMethod_ID").Value.ToString()); Current_Date = Convert.ToDateTime(xElement.Element("Current_Date").Value.ToString()); } In the XML File the value gets stored for date & time. The value gets stored as follows 0 0 3 0 0 0 3 0 0 0 0 5000 2010-12-31T18:08:23.433+05:30 Look at the node <Current_Date>2010-12-31T18:08:23.433+05:30</Current_Date> The date format is yyyy-mm-dd. Now how should I write the following query to get all the submitted transaction details for today's date ? var vTransaction = from s in doc.Descendants("Transaction") .Where(x => x.Element("Current_Date").Value == VDateTime.ToShortDateString()) select new Transaction(s); Similarly how should I write the query to get all the transaction details for the current week & current month? Can you please provide me any code or link through which I can resolve the above issue ? If I am doing anything wrong then please guide me.

  Read the article

• news feed using .Net Dataservices / OData / Atom ?

  - by Stephan

  Let's say I have an web CMS type application, and an EDM model with an entity called 'article', and I need to offer the ability for client applications, to a read/query the articles (and other resources stored in our database) a straightforward syndication feed of these articles to end users (along the lines of a simple RSS feed) It seems to me that for the first task, and .net 4's dataservice would be perfect for the job. For the second case, I'm wondering (a) whether atom the right format to choose - I think it is - and (b) whether it's possible to achieve such a feed using the same ado.net OData service. I took a look at some of the examples out there and briefly set up a proof of concept: http://localhost/projectname/DataService.svc/Articles <?xml version="1.0" encoding="utf-8" standalone="yes"?> <feed xml:base="http://localhost/projectname/DataService.svc/" xmlns:d="http://schemas.microsoft.com/ado/2007/08/dataservices" xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata" xmlns="http://www.w3.org/2005/Atom"> <title type="text">Articles</title> <id>http://localhost/projectname/DataService.svc/Articles</id> <updated>2010-05-21T09:41:22Z</updated> <link rel="self" title="Articles" href="Articles" /> <entry> <id>http://---------DataService.svc/Articles(1)</id> <title type="text"></title> <updated>2010-05-21T09:41:22Z</updated> <author> <name /> </author> <link rel="edit" title="Article" href="Articles(1)" /> <category term="Model1.Article" scheme="http://schemas.microsoft.com/ado/2007/08/dataservices/scheme" /> <content type="application/xml"> <m:properties> <d:int_ContentID m:type="Edm.Int32">1</d:int_ContentID> <d:Titel>hello world</d:Titel> <d:Source>http://www.google.com</d:Source> </m:properties> </content> </entry> </feed> and noticed that, though the feed works and items are showing up, the title tag on the entry level is left blank. (as a result, when you check this feed in a feed reader, you will see no title). I searched msdn but haven't found a way to do that, but it should be possible. Stackoverflow itself uses an atom feed in that fashion, so it should be possible. Right? So I suppose my question is; Is there a way to make the ado.net dataservice Atom feed look like something suitable for your average news feed reader? - OR, am I using the wrong tool for the wrong purposes, and should I be looking elsewhere (.net syndication API's perhaps)?

  Read the article

< Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >