Search Results

Search found 18775 results on 751 pages for 'old hardware'.

Page 35/751 | < Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >

  • "Device Not Ready" when attempting to connecting an old (DOS) hard drive to windows 7

    - by Christopher Vigliotti
    I have an old Western Digital Caviar 2540 hard drive that I am attempting to connect to a Windows 7 machine by using a Bytecc BT-300 USB 2.0 to IDE/SATA Adapter. I'm connecting things in the right order (power, then sata, then usb) and the jumper settings on the drive are at present set to slave, but am still having an issue. I am recieving a message that the drive is not initialized. When I go into Computer Management I can see the drive (as "Disk 5, Unknown, Not Initialized"), but when I attempt to initialize it or right-click and select "Offline" It tells me that "the device is not ready". Is there something that I can to to get around this, connect the drive and copy the data that I need off of this drive? Is there a third party tool available that I can use?

    Read the article

  • Removing integrated video card drivers broke other hardware?

    - by jsnlxndrlv
    I just purchased and installed an XFX ATI Radeon HD 4650 video card. The installation instructions said to remove the old video card drivers before installing the new driver. I did both things, but now every time I start my computer, the Found New Hardware wizard pops up for the following three devices: PCI Device SM Bus Controller Other PCI Bridge Device Furthermore, my LAN port no longer functions. The cable's connected, and the light on the port comes on, but the computer can't find any servers when I attempt to connect with it. The modem and router are working, and obviously I'm able to use the other computer here to post this. What do I do to fix this?

    Read the article

  • Trying to launch old game using wine

    - by rhon
    I'm using wine 1.5.11 on Archlinux, and I try to launch this old game : http://www.cnetfrance.fr/telecharger/waterboy-11006056s.htm?download=1 The problem is that I always get a "Run-time error '13' : Type mismatch" when I try to launch it. I've tried to switch oleaut.dll and ole32.dll to "native", and switch to "Windows 98" mode using winecfg, and then I had this error : err:module:import_dll Library ole32.dll (which is needed by L"Z:\\games\\WaterBoy\\MSVBVM50.DLL") not found err:module:import_dll Library OLEAUT32.dll (which is needed by L"Z:\\games\\WaterBoy\\MSVBVM50.DLL") not found err:module:import_dll Library MSVBVM50.DLL (which is needed by L"Z:\\games\\WaterBoy\\WaterBoy.exe") not found err:module:LdrInitializeThunk Main exe initialization for L"Z:\\games\\WaterBoy\\WaterBoy.exe" failed, status c0000135 I've installed vb5runtime using winetricks, but it didn't help. Am I doing something wrong ?

    Read the article

  • Boost Up My Old Laptop Using a SSD

    - by Sina Bizbone
    I have an old laptop Lenovo SL400 (Core2Due T9550 2.66GHz / 4GB DDR2 Ram). Since I can't afford to buy a new laptop, I thought maybe I could throw an ADATA SP600 64GB SSD as primary drive and move my current HDD to DVD-ROM space by using HDDCADDY. I know that 64gb will come short after installing Visual Studio, SQL Server, etc. So is there anyway to just install the kernel part of windows on SSD and the rest on HDD. Doesn't windows have built-in support to do this? (ReadyBoost is out of picture since it's just simple caching)

    Read the article

  • Does programmable hardware exist to allow hardware to be programmed by computers?

    - by agentbanks217
    I am a programmer and I have never really dealt with the hardware of anything, only software. I want to start building things that I can control from my computer using programming. My question is are there such devices on the market that have a programmable interface or API? For example, I want to build an automated window blinds opening/closing device, and I would like to be able to control it from my computer e.g. writing an app or some code to schedule them when to open and close. I would like to know if there are any devices that can be programmed to do that (the computer part)?

    Read the article

  • Mavericks Server Hardware suggestion [on hold]

    - by crystalWing
    I am an application developer in a small company. Recently, my boss asked me to setup a server for another company owned by him. He has 2 latest MAC PRO and he can provide me any hardware I want. He listed the following requirements: Failover is a must Should be capable to handle 20 vpn connections at the same time RAID 5 Remote Copy of backup data to different loaction I know this is a generic question that I shuoldn't ask here, but I really need help because comparing to Linux and MS server. There are not many resources available online. I read the APPLE PRO TRAINING book but it tells nothing about the above requirements.

    Read the article

  • GDB hardware watchpoint very slow - why?

    - by Laurynas Biveinis
    On a large C application, I have set a hardware watchpoint on a memory address as follows: (gdb) watch *((int*)0x12F5D58) Hardware watchpoint 3: *((int*)0x12F5D58) As you can see, it's a hardware watchpoint, not software, which would explain the slowness. Now the application running time under debugger has changed from less than ten seconds to one hour and counting. The watchpoint has triggered three times so far, the first time after 15 minutes when the memory page containing the address was made readable by sbrk. Surely during those 15 minutes the watchpoint should have been efficient since the memory page was inaccessible? And that still does not explain, why it's so slow afterwards. The GDB is $ gdb --version GNU gdb (GDB) 7.0-ubuntu [...] Thanks in advance for any ideas as what might be the cause or how to fix/work around it.

    Read the article

  • Redirecting user from an old web to another in Sharepoint

    - by BeraCim
    Hi all: I want to add the ability to redirect users when they visit certain old sites. The URL of the old sites are unknown, but the server name is the same, e.g. Old site url: http://sharepoint/mySite/default.aspx New site url: http://sharepoint/myNewSite/... There are a lot of other pages within mySite, most of which must be redirected to the new site, but there are exceptions (e.g. user can still view the documents within the site). I thought I have to do this programmatically by somehow capturing the http request and read the url myself. Being no sharepoint guru, I had a quick google, and found that writing a web part is prehaps the best alternative for my situation. But I'm just wondering, given my situation and needs, is writing a web part, or something programmatically, really the ideal solution? Or is there a faster and quicker way to achieve what I want using Sharepoint? Thanks.

    Read the article

  • Cannot connect to MySQL 4.1+ using old authentication

    - by B T
    I'm trying to connect to a mySQL database at http://bluesql.net, but when I try to connect, it gives this error: Connect Error (2000) mysqlnd cannot connect to MySQL 4.1+ using old authentication I've looked into this, and it has to do with some old password scheme used before MySQL 4.1. Newer versions have the option to use old passwords, which I've read may cause this problem. I'm running php 5.3, and connecting with mySQLi (new mysqli(...)). I'm hoping I can do something in the code to connect to the DB at bluesql.net - clearly I don't control how their database is set up. Downgrading php versions isn't an option. Anyone have any ideas?

    Read the article

  • Google Chrome hardware acceleration making game run slow

    - by powerc9000
    So I have been working on a game in HTML5 canvas and noticed that the games lags and performs much slower when hardware acceleration is turned on in Google Chrome then when it is turned off. You can try for yourself here From doing some profiling I see that the problem lies in drawImage. More specifically drawing one canvas onto another. I do a lot of this. Hardware Acceleration on. Hardware Acceleration off. Is there something fundamental I am missing with one canvas to another? Why would the difference be that profound?

    Read the article

  • First PC Build (Part 1)

    - by Anthony Trudeau
    Originally posted on: http://geekswithblogs.net/tonyt/archive/2014/08/05/157959.aspxA couple of months ago I made the decision to build myself a new computer. The intended use is gaming and for using the last real version of Photoshop. I was motivated by the poor state of console gaming and a simple desire to do something I haven’t done before – build a PC from the ground up. I’ve been using PCs for more than two decades. I’ve replaced a component hear and there, but for the last 10 years or so I’ve only used laptops. Therefore, this article will be written from the perspective of someone familiar with PCs, but completely new at building. I’m not an expert and this is not a definitive guide for building a PC, but I do hope that it encourages you to try it yourself. Component List Research There was a lot of research necessary, because building a PC is completely new to me, and I haven’t kept up with what’s out there. The first thing you want to do is nail down what your goals are. Your goals are going to be driven by what you want to do with your computer and personal choice. Don’t neglect the second one, because if you’re doing this for fun you want to get what you want. In my case, I focused on three things: performance, longevity, and aesthetics. The performance aspect is important for gaming and Photoshop. This will drive what components you get. For example, heavy gaming use is going to drive your choice of graphics card. Longevity is relevant to me, because I don’t want to be changing things out anytime soon for the next hot game. The consequence of performance and longevity is cost. Finally, aesthetics was my next consideration. I could have just built a box, but it wouldn’t have been nearly as fun for me. Aesthetics might not be important to you. They are for me. I also like gadgets and that played into at least one purchase for this build. I used PC Part Picker to put together my component list. I found it invaluable during the process and I’d recommend it to everyone. One caveat is that I wouldn’t trust the compatibility aspects. It does a pretty good job of not steering you wrong, but do your own research. The rest of it isn’t really sexy. I started out with what appealed to me and then I made changes and additions as I dived deep into researching each component and interaction I could find. The resources I used are innumerable. I used reviews, product descriptions, forum posts (praises and problems), et al. to assist me. I also asked friends into gaming what they thought about my component list. And when I got near the end I posted my list to the Reddit /r/buildapc forum. I cannot stress the value of extra sets of eyeballs and first hand experiences. Some of the resources I used: PC Part Picker Tom’s Hardware bit-tech Reddit Purchase PC Part Picker favors certain vendors. You should look at others too. In my case I found their favorites to be the best. My priorities were out-the-door price and shipping time. I knew that once I started getting parts I’d want to start building. Luckily, I timed it well and everything arrived within the span of a few days. Here are my opinions on the vendors I ended up using in alphabetical order. Amazon.com is a good, reliable choice. They have excellent customer service in my experience, and I knew I wouldn’t have trouble with them. However, shipping time is often a problem when you use their free shipping unless you order expensive items (I’ve found items over $100 ship quickly). Ultimately though, price wasn’t always the best and their collection of sales tax in my state turned me off them. I did purchase my case from them. I ordered the mouse as well, but I cancelled after it was stuck four days in a “shipping soon” state. I purchased the mouse locally. Best Buy is not my favorite place to do business. There’s a lot of history with poor, uninterested sales representatives and they used to have a lot of bad anti-consumer policies. That’s a lot better now, but the bad taste is still in my mouth. I ended up purchasing the accessories from them including mouse (locally) and headphones. NCIX is a company that I’ve never heard of before. It popped up as a recommendation for my CPU cooler on PC Part Picker. I didn’t do a lot of research on the company, because their policy on you buying insurance for your orders turned me off. That policy makes it clear to me that the company finds me responsible for the shipment once it leaves their dock. That’s not right, and may run afoul of state laws. Regardless they shipped my CPU cooler quickly and I didn’t have a problem. NewEgg.com is a well known company. I had never done business with them, but I’m glad I did. They shipped quickly and provided good visibility over everything. The prices were also the best in most cases. My main complaint is that they have a lot of exchange only return policies on components. To their credit those policies are listed in the cart underneath each item. The visibility tells me that they’re not playing any shenanigans and made me comfortable dealing with that risk. The vast majority of what I ordered came from them. Coming Next In the next part I’ll tackle my build experience.

    Read the article

  • HTG Explains: Should You Buy Extended Warranties?

    - by Chris Hoffman
    Buy something at an electronics store and you’ll be confronted by a pushy salesperson who insists you need an extended warranty. You’ll also see extended warranties pushed hard when shopping online. But are they worth it? There’s a reason stores push extended warranties so hard. They’re almost always pure profit for the store involved. An electronics store may live on razor-thin product margins and make big profits on extended warranties and overpriced HDMI cables. You’re Already Getting Multiple Warranties First, back up. The product you’re buying already includes a warranty. In fact, you’re probably getting several different types of warranties. Store Return and Exchange: Most electronics stores allow you to return a malfunctioning product within the first 15 or 30 days and they’ll provide you with a new one. The exact period of time will vary from store to store. If you walk out of the store with a defective product and have to swap it for a new one within the first few weeks, this should be easy. Manufacturer Warranty: A device’s manufacturer — whether the device is a laptop, a television, or a graphics card — offers their own warranty period. The manufacturer warranty covers you after the store refuses to take the product back and exchange it. The length of this warranty depends on the type of product. For example, a cheap laptop may only offer a one-year manufacturer warranty, while a more expensive laptop may offer a two-year warranty. Credit Card Warranty Extension: Many credit cards offer free extended warranties on products you buy with that credit card. Credit card companies will often give you an additional year of warranty. For example, if you buy a laptop with a two year warranty and it fails in the third year, you could then contact your credit card company and they’d cover the cost of fixing or replacing it. Check your credit card’s benefits and fine print for more information. Why Extended Warranties Are Bad You’re already getting a fairly long warranty period, especially if you have a credit card that offers you a free extended warranty — these are fairly common. If the product you get is a “lemon” and has a manufacturing error, it will likely fail pretty soon — well within your warranty period. The extended warranty matters after all your other warranties are exhausted. In the case of a laptop with a two-year warranty that you purchase with a credit card giving you a one-year warranty extension, your extended warranty will kick in three years after you purchase the laptop. In that many years, your current laptop will likely feel pretty old and laptops that are as good — or better — will likely be pretty cheap. If it’s a television, better television displays will be available at a lower price point. You’ll either want to upgrade to a newer model or you’ll be able to buy a new, just-as-good product for very cheap. You’ll only have to pay out-of-pocket if your device fails after the normal warranty period — in over two or three years for typical laptops purchased with a decent credit card. Save the money you would have spent on the warranty and put it towards a future upgrade. How Much Do Extended Warranties Cost? Let’s look at an example from a typical pushy retail outlet, Best Buy. We went to Best Buy’s website and found a pretty standard $600 Samsung laptop. This laptop comes with a one-year warranty period. If purchased with a fairly common credit card, you can easily get a two-year warranty period on this laptop without spending an additional penny. (Yes, such credit cards are available with no yearly fees.) During the check-out process, Best Buy tries to sell you a Geek Squad “Accidental Protection Plan.” To get an additional year of Best Buy’s extended warranty, you’d have to pay $324.98 for a “3-Year Accidental Protection Plan”. You’d basically be paying more than half the price of your laptop for an additional year of warranty — remember, the standard warranties would cover you anyway for the first two years. If this laptop did break sometime between two and three years from now, we wouldn’t be surprised if you could purchase a comparable laptop for about $325 anyway. And, if you don’t need to replace it, you’ve saved that money. Best Buy would object that this isn’t a standard extended warranty. It’s a supercharged warranty plan that will also provide coverage if you spill something on your laptop or drop it and break it. You just have to ask yourself a question. What are the odds that you’ll drop your laptop or spill something on it? They’re probably pretty low if you’re a typical human being. Is it worth spending more than half the price of the laptop just in case you’ll make an uncommon mistake? Probably not. There may be occasional exceptions to this — some Apple users swear by Apple’s AppleCare, for example — but you should generally avoid buying these things. There’s a reason stores are so pushy about extended warranties, and it’s not because they want to help protect you. It’s because they’re making lots of profit from these plans, and they’re making so much profit because they’re not a good deal for customers. Image Credit: Philip Taylor on Flickr     

    Read the article

  • How can I remotely tell what brand/model internal SCSI card is installed in a machine?

    - by edmicman
    I am doing some consulting work for a previous employer upgrading and migrating old servers to new hardware. There is an existing file server (HP ProLiant DL380) that has an tape backup drive connected; it is using a SCSI interface and I'm pretty sure it's using an internal SCSI card. They are upgrading to a new server hardware (HP ProLiant DL160 G6). The old server is 2U, the new one 1U and we would want to move the tape drive to the new server, too. I'm trying to figure out if the SCSI card in the old server would be able to be installed in the new one or if we'll need to source a new card; mostly I don't know for sure the height of the card and if it's low-profile enough that it would fit in the new server. There is not much of a technical resource onsite and the old server is in-use anyway so I would like to avoid making a trip in myself or trying to have someone onsite pop open the case and tell me what card is there. It's running Windows Server 2003 - is there a way to tell from say Device Manager what make and model the SCSI card might be? Or any other system diagnostic program or something that would give me hardware info like that? Thanks for any info!

    Read the article

  • squid ssl bump sslv3 enforce to allow old sites

    - by Shrey
    Important: I have this question on stackoverflow but somebody told me this is more relevant place for this question. Thanks I have configured squid(3.4.2) as ssl bumped proxy. I am setting proxy in firefox(29) to use squid for https/http. Now it works for most sites, but some sites which support old SSL proto(sslv3) break, and I see squid not employing any workarounds for those like browsers do. Sites which should work: https://usc-excel.officeapps.live.com/ , https://www.mahaconnect.in As a workaround I have set sslproxy_version=3 , which enforces SSLv3 and above sites work. My question: is there a better way to do this which does not involve enforcing SSLv3 for servers supporting TLS1 or better. Now I know openssl doesn't automatically handle that. But I imagined squid would. My squid conf snipper: http_port 3128 ssl-bump generate-host-certificates=on dynamic_cert_mem_cache_size=4MB cert=/usr/local/squid/certs/SquidCA.pem always_direct allow all ssl_bump server-first all sslcrtd_program /usr/local/squid/libexec/ssl_crtd -s /usr/local/squid/var/lib/ssl_db -M 4MB client_persistent_connections on server_persistent_connections on sslproxy_version 3 sslproxy_options ALL cache_dir aufs /usr/local/squid/var/cache/squid 100 16 256 coredump_dir /usr/local/squid/var/cache/squid strip_query_terms off httpd_suppress_version_string on via off forwarded_for transparent vary_ignore_expire on refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . 0 20% 4320 UPDATE: I have tried compiling squid 3.4.5 with openssl 1.0.1h . No improvements

    Read the article

  • mcelog doesn't fails to start PUIAS 6.4 amd hardware

    - by Predrag Punosevac
    Folks, I am a total Linux n00b. I am trying to deploy mcelog on one of my computing nodes running PUIAS 6.4 (i86_64) [root@lov3 edac]# uname -a Linux lov3.mylab.org 2.6.32-358.18.1.el6.x86_64 #1 SMP Tue Aug 27 22:40:32 EDT 2013 x86_64 x86_64 x86_64 GNU/Linux a free clone of Red Hat 6.4 on AMD hardware [root@lov3 mcelog]# lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 64 On-line CPU(s) list: 0-63 Thread(s) per core: 2 Core(s) per socket: 8 Socket(s): 4 NUMA node(s): 8 Vendor ID: AuthenticAMD CPU family: 21 Model: 2 Stepping: 0 CPU MHz: 1400.000 BogoMIPS: 4999.30 Virtualization: AMD-V L1d cache: 16K L1i cache: 64K L2 cache: 2048K L3 cache: 6144K NUMA node0 CPU(s): 0-7 NUMA node1 CPU(s): 8-15 NUMA node2 CPU(s): 16-23 NUMA node3 CPU(s): 24-31 NUMA node4 CPU(s): 32-39 NUMA node5 CPU(s): 40-47 NUMA node6 CPU(s): 48-55 NUMA node7 CPU(s): 56-63 My mcelog.conf file is more or less default apart of the fact that I would like to run mcelog as a daemon and to log errors. When I start mcelog [root@lov3 mcelog]# mcelog --config-file mcelog.conf AMD Processor family 21: Please load edac_mce_amd module. However the module is present [root@lov3 mcelog]# locate edac_mce_amd.ko /lib/modules/2.6.32-358.18.1.el6.x86_64/kernel/drivers/edac/edac_mce_amd.ko /lib/modules/2.6.32-358.el6.x86_64/kernel/drivers/edac/edac_mce_amd.ko and loaded [root@lov3 edac]# lsmod | grep mce edac_mce_amd 14705 1 amd64_edac_mod Is there anything that I can do to get mcelog working? The only reference I found is this thread http://lists.centos.org/pipermail/centos/2012-November/130226.html

    Read the article

  • New virtualization project and old SAN

    - by Chris
    Hi, We'll start shortly a partial virtualization of our infrastructure and consolidate a dozen servers into virtuals instances. We'll also add some client application virtualization into the mix for good measure. Two HP DL 380 with the new xeons 56xx and 96 GB of memory each running xenserver + xenapp will then take charge of most of our IT needs. So far, so good. One element that is missing from the picture is the storage part. We need some sort of shared storage to enable live motion and other HA features. We have an IBM DS 4300 SAN that we can use for that. But since it's in production since 2005, I'm not sure about such a critical role for a 5yr old part. So my question is: What is the reliability of this kind of equipment after 5 yr ? Can it last 10 yr with no or few problems ? Since our budjet is tight, not buying another SAN will be a big plus. This lead me to another question: FC disks cost an arm and a leg from IBM. When I type the replacement # in google (for example IBM 300GB 15K 4GBPS FC HDD 42D0410), I can find it at a fraction of the price at various sites. So am I stupid to buy from IBM or naive to trust 3rd party reseller ?? Thanks, Chris

    Read the article

  • Should I enabled 802.3x hardware flow control?

    - by Stu Thompson
    What is the conventional wisdom regarding 802.3x flow control? I'm setting up a network at a new colo and am wondering if I should be enabling it or not. My oh-cool-a-bright-and-shiny-new-toy self wants to enable it, but this seems like one of those decisions that could blow up in my face later on. My network: An HP ProCurve 2510G-24 switch A pair of Debian 5 HP DL380 G5's with built-in NC373i 2-port NIC LACP'd as one link. 9000 jumbo frames enabled. (Application) A pair of hand-built Ubuntu server with 4-port Intel Pro/1000 LACP'd as one link. 9000 jumbo frames enabled. (NAS) A few other servers with with single 1Gbps ports, but one with 100Mbps. Most of this kit is 802.3x. I've been enabling it as I go along, and am about to test the network. But as my 'go live' day nears, I am worried about the 802.3x decision as I've never explicitly used it before. Also, I've read some 10-year old articles out there on the Intertubes that warn against using flow control. Should I be enabling 802.3x hardware flow control?

    Read the article

  • sg_map & lsscsi showing old storage version

    - by PratapSingh
    I am using SUN storage and recently upgraded/refreshed my ISCSI LUN storage. We have replicated old storage to new storage and attached to our servers. I can see at SUN storage side that storage is attached to server and also from server when I run the below command it prints the following output : iscsiadm -m session tcp: [1] 10.1.1.10:3260,2 iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd The above storage is SUN STORAGE 7420 But when I run sg_map or lsscsi command it prints different version: lsscsi disk SUN Sun Storage 7410 1.0 /dev/sda disk SUN Sun Storage 7410 1.0 /dev/sdb disk SUN Sun Storage 7410 1.0 /dev/sdc disk SUN Sun Storage 7410 1.0 /dev/sdd Output of ls on "/dev/disk/by-path/" ls -1 /dev/disk/by-path/ ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-0 ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-0-part1 ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-18 ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-18-part1 ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-2 ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-2-part1 ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-4 ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-4-part1 ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-6 ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-6-part1 I have rebooted server twice but still I am getting the same output as given above.

    Read the article

  • Outlook 2007/2010 autodiscovering old Exchange info

    - by Dan
    I currently have an Exchange setup as follows: two Exchange 2003 servers clustered together set up as the current mailbox stores, one Exchange 2003 setup as a frontend, one Exchange 2007 set up as a frontend (was set up for testing by my predecessor, never really used intentionally), and now four Exchange 2010 servers - two mailboxes in a DAG and two with Hub/CAS. Everything seems to be working fine with one exception - Outlook 2007/2010 clients are still autodiscovering the test 2007 frontend and not the 2010 CAS array. I know this because there's an expired cert on the 2007 box so the client displays a cert error when you attempt to autocreate the outlook profile. From what I've read, there is an SCP (Service Connection Point) in AD that is pointing to the old server and it is getting returned first, causing Outlook to try it first. How can I prevent Outlook from even attempting to connect to this 2007 box from now on? http://www.msexchange.org/articles_tutorials/exchange-server-2010/management-administration/exchange-autodiscover.html When Outlook 2007 is installed on a domain joined workstation then the Outlook client will query Active Directory for the Autodiscover information. Active Directory will return a list of SCP’s and the Outlook client will automatically select the first SCP in this list. Using the information found in the SCP the Outlook client will contact the Client Access Server for its configuration information and the Outlook client will be configured automatically.

    Read the article

  • Error - "IR Hardware not detected" - but it's installed/working

    - by Robert
    I am trying to do: Settings-TV-Set up TV signal. During this process I am getting the error "IR Hardware not detected." With the remote, I can select the "try again" button (to re-detect) and it tries again, so the remote works. Plugging in the "IR blaster" doesn't change anything. (I wouldn't expect any difference, but I read a post which said you needed that. I will get Media Center to change channels if I can get that working - but first things first.) I was able to do the setup months ago when I had cable. and everything was fine. I just got DirecTV. (BTW - During the above process, Media Center detects the signal coming in on channel 3. Windows XP Media Center SP3. The TV Tuner card is a Pinnacle TCTV HD PCI. Everything - and I mean everything - has the latest firmware and drivers - as of 4 months ago when I fixed a different problem. So I DON"T WANT TO HEAR the standard answer to check drivers/firmware. THANK YOU.) Thanks for any help.

    Read the article

  • Hardware doesn't work some times

    - by Ali
    I have an Asus n51vf laptop. I bought it not long time ago (less than a month) and installed Windows 7 on it. Since that it wasn't new when I bought it, I don't know, if the problem was occuring before re-installing Windows 7. There are two problems, that might (or might not) have something to do with each other: Problem The less annoying problem is that the screen flickers ONLY on YouTube when scrolling and/or pausing/playing the video or moving the curser over the video. The second more timeconsuming problem is that some of the hardware doesn't work when I turn up the computer. Then I have to reboot the computer and try again. Example: I turn on the computer, and the touchpad doesn't work - I then reboot and it works again. This has so far happened to the screen (leading to a black screen), the keyboard and the touchpad. More frequently the mouse. What have I tried to do so far? I tried reeinstalling the touchpad driver (Synaptic Touchpad driver from Asus Support Page) - didn't help at all. I even tried reinstalling the driver when the non-responding mouse on startup-problem occured (using the keyboard), but it asked me to reboot and didn't help at all. I also installed (and reinstalled) the graphics driver; it's a GeForce GT 130M. Now, the problem never occurs spontaneously - it only appears when booting my computer. I can even use the computer for heavy tasks (games, multiple programs running etc.) with no problem at all. I suspect, that the problem is in some booting mechanism that fails: Maybe the Windows driver loading? Motherboard problems?

    Read the article

  • Getting old bluetooth headset out of standby on Windows 7

    - by luagh45
    I think this is the problem, and if not, I'm open to suggestions. I have an old Jabra BT200 that I used to use on my phone. When a phone call was coming in it would beep using its own noises (meaning the phone never rang inside the headset) and then I could push the 'answer/hang up' button and sound and mic would start working. I have now paired it with Windows 7, and it looks good. Under the playback menu I have 'Bluetooth Hands free Audio / Jabra BT200 (Mono Audio) / Ready', and under the recording menu I have 'Bluetooth Audio Input Device / Jabra BT200 (Mono Audio) / Ready'. However when I try to test the speakers Windows sends a sound, but I never hear it, and when I talk in the mic, Windows never hears me. If I right click either the Bluetooth mic or speakers there's an option to 'Connect', but it's grayed out and I cannot click it. As the final piece of knowledge I have, my headset blinks once every 3 seconds when it's in standby and I can't get that to change. If everything was working it should blink once every second at which point I think all of my problems would be fixed. Hence my issue: I can't seem to get my headset out of standby. On my headset I've tried sending it test noises and then pressing the 'Answer' button, but still nothing. The headset beeps when I press it, so it works, it just doesn't ever come out of standby. Is there maybe some way to trick my headset into thinking it's getting a phone call from my computer?

    Read the article

  • Hardware issue: computer plays beep sounds at startup, and then turns off

    - by Darkkurama
    Turns out that after moving, my computer got damaged somehow. I installed my computer 2 days ago. I didn't check the state of the hardware parts and turned the pc on recklessly, not realizing that the cpu fan was dettached from the cpu. After this I reattached the fan. The computer worked kind of faulty after that, because at the time of startup, it would play a long beep (different from the normal beep) and won't display anything. I tried restarting after this incident and it got fixed (don't know how, but it did), and I was even able to play some videogames for some hours (more than 5). This morning I tried to get this issue sorted out by checking again the cpu and in general, the connections, and for my surprise, at the time of turning it on again, the computer wouldn't boot at all. I reapplied some thermal paste to the cpu and fan, but got no results (I did this because the old paste was very badly distributted along the surface of both cpu and fan). Now every time I turn it on, the computer acts randomly: sometimes at startup, it plays a long continous beep and then turns off. one time it played a long continous beep and got to the windows password input screen, but then it turned off More frequently, I turn it on and after some seconds, it turns off without any sound. You can check this video I recorded, which features how the computer behaves most of the time Another one I tried troubleshoting it myself by disconnecting my graphic card, rams, HDD and even the cpu and its fan with no result. Computer specs: Intel Core 2 Quad Q6600 processor, Nvidia xfx gtx 260 black edition, 4 GB ram, 500 GB hard drive, Windows 7 64 bit

    Read the article

  • Create a partition table on a hardware RAID1 drive with [c]fdisk

    - by Lev Levitsky
    My question is, is there a reason for this not to work? Details: I have two 500 Gb drives, and my motherboard RAID support, so I created a RAID1 array and booted from a Linux live medium. I then listed the disks and, apart from the obvious /dev/sda, /dev/sdb, etc. there was /dev/md126 which, I figured, was the mirrored "virtual" drive. Its size was 475 Gb; I had seen that the size of the array would be smaller than 500 Gb when I was creating it, so no surprise there. I did cfdisk /dev/md126, created the necessary partitions and chose write. It's been about half an hour now, I think. It doesn't seem like it's ever going to finish. The only thing about cfdisk in dmesg is that it's "blocked for more than 120 seconds". Doing fdisk -l /dev/md126 in another terminal I see all three partitions I created and a note that "Partition 1 does not start on a physical sector boundary". The table is lost after reboot, though. I tried to partition /dev/sda individually, and it worked, the table was written in about a second. The "not on a physical sector boundary" message is there, too. EDIT: I tried fdisk on /dev/sda, then there were no messages about sector boundaries. After a reboot, I am able to use mkfs on /dev/dm126p1, etc. fdisk shows that /dev/md126 has the same partitions as /dev/sda (but /dev/sdb doesn't have any). But at some point ("writing superblock and filesystem accounting information") mkfs is also blocked. Using it on sda1 results in a "partition is used by the system" error. What can be the problem? EDIT 2: I booted a freshly updated system from a pendrive and was able to create partition table and filesystems on /dev/md126 without any apparent problems. Was it an issue with the support of the hardware? My MB is Asus P9X79.

    Read the article

  • linux: mount old ATA disk to USB adapter

    - by 130490868091234
    I am trying to recover data from an old Linux that was installed in a computer on an ATA hard drive. I found a ScanLogic Corp. SL11R-IDE IDE Bridge (04ce:0002), an ATA adapter to USB 1.0 like the one in the picture: and after switching it on, I plugged it into a laptop with Ubuntu 12.04. I am used to the drives being automatically mounted, but this one doesn't show up in /media. After doing a dmesg, all I got is this: [215298.671924] usb 2-1.1: new full-speed USB device number 5 using ehci_hcd [215298.767330] scsi19 : usb-storage 2-1.1:1.0 [215299.841701] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.017258] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.197050] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.372730] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd I tried plugging in the adapter to the three different USB ports in my laptop (one of them USB 3.0), but got no luck with any of them. I get different devices under, for example: /dev/bus/usb/003/002 or /dev/bus/usb/002/004, but I don't get any /dev/sdbN links. The output blkid -o list -c /dev/null is just the laptop's partitions. I have tried taking out the jumper, putting it as master and as CS Enabled, but didn't change the result. Any ideas?

    Read the article

< Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >