Search Results

Search found 1010 results on 41 pages for 'sit'.

Page 35/41 | < Previous Page | 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

  • Can't get my Raspberry Pi to keep a static IP

    - by JonnyIrving
    I recently got given a Raspberry Pi and I would like to be able to remote into it using puTTy from my laptop so I don't have to sit next to my tv with a keyboard and mouse to use it. I am able to get a puTTy session going when I know the IP address that my router has given the Pi on each session but it keeps changing on each reboot as I would expect. So I followed a number if instruction to go about configuring the RPi to keep a static IP address. This involved changing the file at '/etc/netwrok/interfaces' which now contains (password removed): auto lo iface lo inet loopback iface eth0 inet static address 192.168.1.82 netmask 255.255.255.0 gateway 192.168.1.254 auto wlan0 allow-hotplug wlan0 iface wlan0 inet dhcp wpa-ssid "BeBoxD304BF" wpa-psk "**********" Despite this however, each time I reboot my RPi it gives me a new dynamic IP address still. I also noticed that in the 'ifconfig' output below that the details of the eth0 doesn't contain IP details for inet addr, Bcast or Mask which have been present in all other examples I have seen online. eth0 Link encap:Ethernet HWaddr b8:27:eb:b5:95:da UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 00:87:c6:00:33:77 inet addr:192.168.1.83 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:918 errors:0 dropped:0 overruns:0 frame:0 TX packets:277 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 Also I'm not sure if this is relevant but it can't hurt! The file at '/etc/resolv.conf' contains: domain config search config nameserver 192.168.1.254 ..I heard it might mean something on one of the pages I was looking at. I would be very grateful for any help with this. I have tried everything I can think of and would really like to get this working this weekend so I can use it from work.

    Read the article

  • Asus M4A79XTD-EVO / AMD Phenom II X4 965 Crashes / BSOD / Hangs / Restarts

    - by Tiby
    I'll try to be as concise as possible because I have a lot to say about my problem, but I'd rather say it when asked or when I feel it's necessary, just to make this initial reading clearer. For about a year and a half I have periods when my system has all the problems in the title (I'll use the word 'crash' for either one). I'll list some patterns and what I tried to do and what were the results, but the list is not exclusive: usually it crashes when a CPU-intensive operation is in progress, like a game or video encoding or HD movie rendering, but also sometimes crashes when I'm doing nothing after a first crash the system is very unstable and sometimes it crashes even during POST, or doesn't boot at all Some months ago I went to a local service (one that you just put your computer on the table and sit there with a guy and trying to figure out the problem, very rare these days) and they used OCCT and it crashed every time he changed some part to test it out (PSU, RAM, video card, HDD). The last one was the CPU. They changed the CPU and it didn't crash any more. Then when they put my CPU back, it also didn't crash. We figured that the trouble was the thermal paste (probably some 2 years old) because it was the only thing changed while testing. Up until 2 weeks ago, I haven't had any more problems. 2 weeks ago the problems reappeared. I changed again the thermal paste, put some Arctic Silver 5, and for about a week everything worked perfect (tried some games, video encoding, no more crashes). But again it started crashing in the same fashion as the first time. But now, instead, I figured out a very odd behaviour: when I start some of the apps above, in most cases it crashes if I start OCCT and turn on the CPU test, and run any of the programs above, it doesn't crash, even if the CPU is on 100% load (and 65-70 degrees Celsius temperature) if I shut down OCCT and continue using the programs, it crashes in a very short period of time (even if the CPU is on 5-10% load and 40 degrees) There are so many patterns and temporary solutions that I figured out in this year and a half period of time, that I can't include them all because I don't know which one are more relevant, but I'll happily provide any details you ask. My system is: CPU: AMD Phenom II X4 965 (3400 MHz - 125W) MB: ASUS M4A79XTD - EVO RAM: Corsair Vengeance 8 GB (2 x 4GB) CL8 1600MHz Video: HIS Radeon HD5770 1GB PSU: Corsair 750W HDD: Western Digital 1TB OS: Win 7 Enterprise 64 BIT (also tried with Windows Server 2008 R2 Trial and Win XP)

    Read the article

  • Proxy Error 502 "Reason: Error reading from remote server" with Apache 2.2.3 (Debian) mod_proxy and Jetty 6.1.18

    - by Martin
    Apache is receiving requests at port :80 and proxying them to Jetty at port :8080 The proxy server received an invalid response from an upstream server The proxy server could not handle the request GET /. My dilemma: Everything works fine normally (fast requests, few seconds or few tens of seconds long requests are processed ok). Problems occur when request processing takes long (few minutes?). If I issue request instead directly to Jetty at port :8080 the request is processed OK. So problem is likely to sit somewhere between Apache and Jetty where I am using mod_proxy. How to solve this? I have already tried some "tricks" related to KeepAlive settings, without luck. Here is my current configuration, any suggestions? #keepalive Off ## I have tried this, does not help #SetEnv force-proxy-request-1.0 1 ## I have tried this, does not help #SetEnv proxy-nokeepalive 1 ## I have tried this, does not help #SetEnv proxy-initial-not-pooled 1 ## I have tried this, does not help KeepAlive 20 ## I have tried this, does not help KeepAliveTimeout 600 ## I have tried this, does not help ProxyTimeout 600 ## I have tried this, does not help NameVirtualHost *:80 <VirtualHost _default_:80> ServerAdmin [email protected] ServerName www.mydomain.fi ServerAlias mydomain.fi mydomain.com mydomain www.mydomain.com ProxyRequests On ProxyVia On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyRequests Off ProxyPass / http://www.mydomain.fi:8080/ retry=1 acquire=3000 timeout=600 ProxyPassReverse / http://www.mydomain.fi:8080/ RewriteEngine On RewriteCond %{SERVER_NAME} !^www\.mydomain\.fi RewriteRule /(.*) http://www.mydomain.fi/$1 [redirect=301L] ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature On </VirtualHost> Here is also the debug log from a failing request: 74.125.43.99 - - [29/Sep/2010:20:15:40 +0300] "GET /?wicket:bookmarkablePage=newWindow:com.mydomain.view.application.reports.SaveReportPage HTTP/1.1" 502 355 "https://www.mydomain.fi/?wicket:interface=:0:2:::" "Mozilla/5.0 (Windows; U; Windows NT 6.1; fi; rv:1.9.2.10) Gecko/20100914 Firefox/3.6.10" [Wed Sep 29 20:20:40 2010] [error] [client 74.125.43.99] proxy: error reading status line from remote server www.mydomain.fi, referer: https://www.mydomain.fi/?wicket:interface=:0:2::: [Wed Sep 29 20:20:40 2010] [error] [client 74.125.43.99] proxy: Error reading from remote server returned by /, referer: https://www.mydomain.fi/?wicket:interface=:0:2:::

    Read the article

  • Change Logon DPI setting in Windows 8.1

    - by jmc302005
    I love how M$ keeps making decisions for me about how I want my desktop to look. Now they have added per-user dpi settings. The problem this has created is that there is no adjustable dpi setting for the Lock/Logon screen. Let me explain. you can change the dpi setting to be the same across all displays and this does affect the icons and font on the lock/logon screen. However it does not affect any app/program that can run on the lock/logon screen. Ex. I use a 44" flat screen tv for my monitor on my desktop. Big enough for me to sit in my recliner and use my comp. But I don't have a wireless keyboard. And it sucks having the wire from the keyboard running across the floor. Plus I really don't want to keep a keyboard next to me. So I use the on screen keyboard for logging in and quick typing (search, web address, etc.) So the problem is that with the new dpi setup my on screen keyboard takes up nearly half the screen. Does M$ think we are all blind? Oh no I remember they think desktops should look like tablets and phones. I tried looking through the registry to see if I could find a setting for it. In the key HKEY_USERS.DEFAULT\Control Panel\Desktop there is a string value named "LogicalDPIOverride" with a value of -1. I have a feeling this is where I can fix the issue. I tried changing the value to 0 and to 1 with no change in the result. Instead I noticed that after logging out and back in the -1 value was back in the registry. So now M$ has also added a way for us to not be able to change a setting in the registry. They are making it harder and harder for us power users to be able to do anything with the settings in windows. Soon we will all have the same exact Windows with absolutely no customization. ok sorry for the quick rant. The real question here is. How can I change this defualt dpi crap? Can I use the LogPixels string that worked for dpi in Windows 7? Here are 2 Screen shots 1 of the Lock Screen and 1 of the Logon Screen http://i.imgur.com/6RM5ufE.jpg http://i.imgur.com/cnY5bmm.jpg Please any help will be appreciated.

    Read the article

  • Vista stuck at "Shutting down..." screen. Any way to get verbose logging?

    - by CapBBeard
    Hi all, My home machine has been running fine for about 3 years, no problems at all. Within the last couple of weeks it's had real trouble trying to shut down. It'll get so far and then just sit there at the "Shutting down..." screen for hours. I've left it overnight, I've tried in safe mode, all to no avail. These days, I just wait for the disk activity to finish up and then hold the power button to turn it off. Feels dirty as, especially because there's a RAID involved! The hardware itself is in pretty good shape and of decent spec; Core 2 Quad, 4GB RAM, 1TB RAID 1+0, so it's not quite like a 7 year old PC coming to end of life! In the last month, hardware hasn't changed except for a new monitor. Admittedly I haven't tried unplugging the monitor but I've never heard of that preventing a shutdown. I might give it a whirl later I guess, as a last resort. I've uninstalled old apps, done updates, checked the event log, looked in device manager, uninstalled all non-present devices, disabled various non-critical devices (imaging, audio etc), unplugged peripherals, stopped non-essential services, unplugged the network, disabled the network adapter entirely, ran chkdsk, verified my RAID, the list goes on. But not a single lead. I'm pretty stumped. It could be hardware, but I have no other evidence to suggest so; when the PC is running, it runs fine. Temperatures are good, gaming is smooth as always, disk performance is fine. Event log even makes it look like the shutdown was completed (gets to the point where the event log service stops). In fact, the PC doesn't appear to realise that I cut the power to it. So my question is, does anyone know if there is a way I can get some verbose output (or a log) from shutdown to give me some idea of what is causing the issue? I'm guessing it's stuck unloading some app/driver but it would be good to get some specifics! Unless anyone has any other ideas? I suspect a reinstall would resolve the issue, however I'm looking to get a new PC built in the next month or so, and the reinstall is going to be quite a big job so I'd rather just wait until then if it comes to that. Would still be nice to get this sorted in the mean time though. Cheers!

    Read the article

  • Create and manage child name servers (glue records) within my domain?

    - by basilmir
    Preface I use a top level domain provider that only allows me to add "normal" third-party name servers (a list where i can add "ns1.hostingcompany.com" type entries... nothing else) AND "child name servers" which i can later attach to my parent account ( ns1.myowndomain.com and an ip address). They do not provide other means of linking up. I want to host my own server and dns, even with just one name server (at first). My setup: Airport Extreme - get's a static ip address from my ISP Mac Mini Server - sits behind the Airport and get's a 10.0.1.2 My problem is that i can't seem to configure DNS correctly. I added a "child nameserver" with my airport's external static ip address at the top level provider, so to my understanding i should have all DNS traffic redirected to my Airport. I've opened port 53 UDP to let the traffic in. Now, what i don't get is this. My Mini Server is sitting on a 10.0.1.2 address and i have setup dns correctly, with an A record to point and resolve my server AND a reverse lookup to that 10.0.1.2. So it's ok for "internal stuff". Here is the clicker... How, when a request comes from the exterior for a reverse lookup, does the server "know" ... well look i have everything in 10.0.1.2 but the guy outside needs something from my real address. I can't begin to describe the MX record bonanza... How do i set this "right"? Do i "need" my Mini Server to sit on the external address directly (i can see how this could be the preferred solution, being close to a "real" server i have in my mind). If not... do i need a PTR record on the 10.0.1.2 server but with the external address in there? My dream: I will extend this "setup" with multiple Mini's in different cities where i work. I want a distributed something (Xgrid comes to mind). PS. Be gentle, i've read 2 books and the subject, and bought both the Lynda Essentials and DNS and Networking to boot, still i'm far from being on top of things.

    Read the article

  • windows 7 virtual wireless adapter keeps going to sleep

    - by conners
    Just a quick question that I can't see mentioned anywhere online. I have a Windows 7 box configured like these guys recommend http://www.itgeekdiary.com/windows-7-as-an-wi-fi-access-point/ simply so that I can have my Windows 7 box as a wifi access point or a wifi emitter. It's also called a Microsoft Virtual WiFi Miniport Adapter. But it powers off and shuts down automatically and stops working. Basically everything works as intended and then - well -it will stopped working when I am not at the Windows 7 PC for a long time. The problem seems to be that every time my PC goes to "power save / sleep" and in the morning the Windows 7 machine "wakes" but blooming heck the wifi has stopped and you have to power cycle the PC (which is very uncool). When I power Cycle I have to do the following as administrator C:\Windows\System32\netsh.exe wlan start hostednetwork I then tried a gazllion things involving services and power management and eventually discovered that if I run the following commands as administrator it will be ok (for a bit) but every 3rd ot 4th time I try this "trick" it simply fails. the trick that seems to work 3 out of 4 times (i.e. "most" of the time) C:\Windows\System32\netsh.exe wlan stop hostednetwork C:\Windows\System32\netsh.exe wlan start hostednetwork But why does this only work "some" of the time? What else I did by myself: on every manage adapter properties (that relates to the wifi) I right clicked [configure] [power management] /disabled/ "allow the computer to power off to save power" <- this made no difference Also (and this is a bit annoying) there is no system tray app/GUI for the Microsoft Virtual WiFi Miniport Adapter output signal ... none... so (lame as it sounds) the ONLY way I can check if it's on is to physically go to another device and SCAN.. lame so my question can probably be solved by any of the following: a) can I stop Windows 7 sleeping this wifi when the machine sleeps b) can I force Windows to force wake this process on wake? if so how? c) what is the service / process REALLY called and how do I restart it if it crashes d) how can I flush the wifi properly rather power cycle the host machine e) anyone have a link to an program or app that can sit in the system tray that shows windows 7 wifi hotspot emission status (on/off/etc etc) Since I am a programmer I can easily write a vbs script / windows exe to fix this (and I will share this solution) and the gui problem if I can work out the actual service that is running that netsh stops/starts

    Read the article

  • Bulk inserting best way to about it? + Helping me understand fully what I found so far

    - by chobo2
    Hi So I saw this post here and read it and it seems like bulk copy might be the way to go. http://stackoverflow.com/questions/682015/whats-the-best-way-to-bulk-database-inserts-from-c I still have some questions and want to know how things actually work. So I found 2 tutorials. http://www.codeproject.com/KB/cs/MultipleInsertsIn1dbTrip.aspx#_Toc196622241 http://www.codeproject.com/KB/linq/BulkOperations_LinqToSQL.aspx First way uses 2 ado.net 2.0 features. BulkInsert and BulkCopy. the second one uses linq to sql and OpenXML. This sort of appeals to me as I am using linq to sql already and prefer it over ado.net. However as one person pointed out in the posts what he just going around the issue at the cost of performance( nothing wrong with that in my opinion) First I will talk about the 2 ways in the first tutorial I am using VS2010 Express, .net 4.0, MVC 2.0, SQl Server 2005 Is ado.net 2.0 the most current version? Based on the technology I am using, is there some updates to what I am going to show that would improve it somehow? Is there any thing that these tutorial left out that I should know about? BulkInsert I am using this table for all the examples. CREATE TABLE [dbo].[TBL_TEST_TEST] ( ID INT IDENTITY(1,1) PRIMARY KEY, [NAME] [varchar](50) ) SP Code USE [Test] GO /****** Object: StoredProcedure [dbo].[sp_BatchInsert] Script Date: 05/19/2010 15:12:47 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO ALTER PROCEDURE [dbo].[sp_BatchInsert] (@Name VARCHAR(50) ) AS BEGIN INSERT INTO TBL_TEST_TEST VALUES (@Name); END C# Code /// <summary> /// Another ado.net 2.0 way that uses a stored procedure to do a bulk insert. /// Seems slower then "BatchBulkCopy" way and it crashes when you try to insert 500,000 records in one go. /// http://www.codeproject.com/KB/cs/MultipleInsertsIn1dbTrip.aspx#_Toc196622241 /// </summary> private static void BatchInsert() { // Get the DataTable with Rows State as RowState.Added DataTable dtInsertRows = GetDataTable(); SqlConnection connection = new SqlConnection(connectionString); SqlCommand command = new SqlCommand("sp_BatchInsert", connection); command.CommandType = CommandType.StoredProcedure; command.UpdatedRowSource = UpdateRowSource.None; // Set the Parameter with appropriate Source Column Name command.Parameters.Add("@Name", SqlDbType.VarChar, 50, dtInsertRows.Columns[0].ColumnName); SqlDataAdapter adpt = new SqlDataAdapter(); adpt.InsertCommand = command; // Specify the number of records to be Inserted/Updated in one go. Default is 1. adpt.UpdateBatchSize = 1000; connection.Open(); int recordsInserted = adpt.Update(dtInsertRows); connection.Close(); } So first thing is the batch size. Why would you set a batch size to anything but the number of records you are sending? Like I am sending 500,000 records so I did a Batch size of 500,000. Next why does it crash when I do this? If I set it to 1000 for batch size it works just fine. System.Data.SqlClient.SqlException was unhandled Message="A transport-level error has occurred when sending the request to the server. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)" Source=".Net SqlClient Data Provider" ErrorCode=-2146232060 Class=20 LineNumber=0 Number=233 Server="" State=0 StackTrace: at System.Data.Common.DbDataAdapter.UpdatedRowStatusErrors(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount) at System.Data.Common.DbDataAdapter.UpdatedRowStatus(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount) at System.Data.Common.DbDataAdapter.Update(DataRow[] dataRows, DataTableMapping tableMapping) at System.Data.Common.DbDataAdapter.UpdateFromDataTable(DataTable dataTable, DataTableMapping tableMapping) at System.Data.Common.DbDataAdapter.Update(DataTable dataTable) at TestIQueryable.Program.BatchInsert() in C:\Users\a\Downloads\TestIQueryable\TestIQueryable\TestIQueryable\Program.cs:line 124 at TestIQueryable.Program.Main(String[] args) in C:\Users\a\Downloads\TestIQueryable\TestIQueryable\TestIQueryable\Program.cs:line 16 InnerException: Time it took to insert 500,000 records with insert batch size of 1000 took "2 mins and 54 seconds" Of course this is no official time I sat there with a stop watch( I am sure there are better ways but was too lazy to look what they where) So I find that kinda slow compared to all my other ones(expect the linq to sql insert one) and I am not really sure why. Next I looked at bulkcopy /// <summary> /// An ado.net 2.0 way to mass insert records. This seems to be the fastest. /// http://www.codeproject.com/KB/cs/MultipleInsertsIn1dbTrip.aspx#_Toc196622241 /// </summary> private static void BatchBulkCopy() { // Get the DataTable DataTable dtInsertRows = GetDataTable(); using (SqlBulkCopy sbc = new SqlBulkCopy(connectionString, SqlBulkCopyOptions.KeepIdentity)) { sbc.DestinationTableName = "TBL_TEST_TEST"; // Number of records to be processed in one go sbc.BatchSize = 500000; // Map the Source Column from DataTabel to the Destination Columns in SQL Server 2005 Person Table // sbc.ColumnMappings.Add("ID", "ID"); sbc.ColumnMappings.Add("NAME", "NAME"); // Number of records after which client has to be notified about its status sbc.NotifyAfter = dtInsertRows.Rows.Count; // Event that gets fired when NotifyAfter number of records are processed. sbc.SqlRowsCopied += new SqlRowsCopiedEventHandler(sbc_SqlRowsCopied); // Finally write to server sbc.WriteToServer(dtInsertRows); sbc.Close(); } } This one seemed to go really fast and did not even need a SP( can you use SP with bulk copy? If you can would it be better?) BatchCopy had no problem with a 500,000 batch size.So again why make it smaller then the number of records you want to send? I found that with BatchCopy and 500,000 batch size it took only 5 seconds to complete. I then tried with a batch size of 1,000 and it only took 8 seconds. So much faster then the bulkinsert one above. Now I tried the other tutorial. USE [Test] GO /****** Object: StoredProcedure [dbo].[spTEST_InsertXMLTEST_TEST] Script Date: 05/19/2010 15:39:03 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO ALTER PROCEDURE [dbo].[spTEST_InsertXMLTEST_TEST](@UpdatedProdData nText) AS DECLARE @hDoc int exec sp_xml_preparedocument @hDoc OUTPUT,@UpdatedProdData INSERT INTO TBL_TEST_TEST(NAME) SELECT XMLProdTable.NAME FROM OPENXML(@hDoc, 'ArrayOfTBL_TEST_TEST/TBL_TEST_TEST', 2) WITH ( ID Int, NAME varchar(100) ) XMLProdTable EXEC sp_xml_removedocument @hDoc C# code. /// <summary> /// This is using linq to sql to make the table objects. /// It is then serailzed to to an xml document and sent to a stored proedure /// that then does a bulk insert(I think with OpenXML) /// http://www.codeproject.com/KB/linq/BulkOperations_LinqToSQL.aspx /// </summary> private static void LinqInsertXMLBatch() { using (TestDataContext db = new TestDataContext()) { TBL_TEST_TEST[] testRecords = new TBL_TEST_TEST[500000]; for (int count = 0; count < 500000; count++) { TBL_TEST_TEST testRecord = new TBL_TEST_TEST(); testRecord.NAME = "Name : " + count; testRecords[count] = testRecord; } StringBuilder sBuilder = new StringBuilder(); System.IO.StringWriter sWriter = new System.IO.StringWriter(sBuilder); XmlSerializer serializer = new XmlSerializer(typeof(TBL_TEST_TEST[])); serializer.Serialize(sWriter, testRecords); db.insertTestData(sBuilder.ToString()); } } So I like this because I get to use objects even though it is kinda redundant. I don't get how the SP works. Like I don't get the whole thing. I don't know if OPENXML has some batch insert under the hood but I do not even know how to take this example SP and change it to fit my tables since like I said I don't know what is going on. I also don't know what would happen if the object you have more tables in it. Like say I have a ProductName table what has a relationship to a Product table or something like that. In linq to sql you could get the product name object and make changes to the Product table in that same object. So I am not sure how to take that into account. I am not sure if I would have to do separate inserts or what. The time was pretty good for 500,000 records it took 52 seconds The last way of course was just using linq to do it all and it was pretty bad. /// <summary> /// This is using linq to sql to to insert lots of records. /// This way is slow as it uses no mass insert. /// Only tried to insert 50,000 records as I did not want to sit around till it did 500,000 records. /// http://www.codeproject.com/KB/linq/BulkOperations_LinqToSQL.aspx /// </summary> private static void LinqInsertAll() { using (TestDataContext db = new TestDataContext()) { db.CommandTimeout = 600; for (int count = 0; count < 50000; count++) { TBL_TEST_TEST testRecord = new TBL_TEST_TEST(); testRecord.NAME = "Name : " + count; db.TBL_TEST_TESTs.InsertOnSubmit(testRecord); } db.SubmitChanges(); } } I did only 50,000 records and that took over a minute to do. So I really narrowed it done to the linq to sql bulk insert way or bulk copy. I am just not sure how to do it when you have relationship for either way. I am not sure how they both stand up when doing updates instead of inserts as I have not gotten around to try it yet. I don't think I will ever need to insert/update more than 50,000 records at one type but at the same time I know I will have to do validation on records before inserting so that will slow it down and that sort of makes linq to sql nicer as your got objects especially if your first parsing data from a xml file before you insert into the database. Full C# code using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Xml.Serialization; using System.Data; using System.Data.SqlClient; namespace TestIQueryable { class Program { private static string connectionString = ""; static void Main(string[] args) { BatchInsert(); Console.WriteLine("done"); } /// <summary> /// This is using linq to sql to to insert lots of records. /// This way is slow as it uses no mass insert. /// Only tried to insert 50,000 records as I did not want to sit around till it did 500,000 records. /// http://www.codeproject.com/KB/linq/BulkOperations_LinqToSQL.aspx /// </summary> private static void LinqInsertAll() { using (TestDataContext db = new TestDataContext()) { db.CommandTimeout = 600; for (int count = 0; count < 50000; count++) { TBL_TEST_TEST testRecord = new TBL_TEST_TEST(); testRecord.NAME = "Name : " + count; db.TBL_TEST_TESTs.InsertOnSubmit(testRecord); } db.SubmitChanges(); } } /// <summary> /// This is using linq to sql to make the table objects. /// It is then serailzed to to an xml document and sent to a stored proedure /// that then does a bulk insert(I think with OpenXML) /// http://www.codeproject.com/KB/linq/BulkOperations_LinqToSQL.aspx /// </summary> private static void LinqInsertXMLBatch() { using (TestDataContext db = new TestDataContext()) { TBL_TEST_TEST[] testRecords = new TBL_TEST_TEST[500000]; for (int count = 0; count < 500000; count++) { TBL_TEST_TEST testRecord = new TBL_TEST_TEST(); testRecord.NAME = "Name : " + count; testRecords[count] = testRecord; } StringBuilder sBuilder = new StringBuilder(); System.IO.StringWriter sWriter = new System.IO.StringWriter(sBuilder); XmlSerializer serializer = new XmlSerializer(typeof(TBL_TEST_TEST[])); serializer.Serialize(sWriter, testRecords); db.insertTestData(sBuilder.ToString()); } } /// <summary> /// An ado.net 2.0 way to mass insert records. This seems to be the fastest. /// http://www.codeproject.com/KB/cs/MultipleInsertsIn1dbTrip.aspx#_Toc196622241 /// </summary> private static void BatchBulkCopy() { // Get the DataTable DataTable dtInsertRows = GetDataTable(); using (SqlBulkCopy sbc = new SqlBulkCopy(connectionString, SqlBulkCopyOptions.KeepIdentity)) { sbc.DestinationTableName = "TBL_TEST_TEST"; // Number of records to be processed in one go sbc.BatchSize = 500000; // Map the Source Column from DataTabel to the Destination Columns in SQL Server 2005 Person Table // sbc.ColumnMappings.Add("ID", "ID"); sbc.ColumnMappings.Add("NAME", "NAME"); // Number of records after which client has to be notified about its status sbc.NotifyAfter = dtInsertRows.Rows.Count; // Event that gets fired when NotifyAfter number of records are processed. sbc.SqlRowsCopied += new SqlRowsCopiedEventHandler(sbc_SqlRowsCopied); // Finally write to server sbc.WriteToServer(dtInsertRows); sbc.Close(); } } /// <summary> /// Another ado.net 2.0 way that uses a stored procedure to do a bulk insert. /// Seems slower then "BatchBulkCopy" way and it crashes when you try to insert 500,000 records in one go. /// http://www.codeproject.com/KB/cs/MultipleInsertsIn1dbTrip.aspx#_Toc196622241 /// </summary> private static void BatchInsert() { // Get the DataTable with Rows State as RowState.Added DataTable dtInsertRows = GetDataTable(); SqlConnection connection = new SqlConnection(connectionString); SqlCommand command = new SqlCommand("sp_BatchInsert", connection); command.CommandType = CommandType.StoredProcedure; command.UpdatedRowSource = UpdateRowSource.None; // Set the Parameter with appropriate Source Column Name command.Parameters.Add("@Name", SqlDbType.VarChar, 50, dtInsertRows.Columns[0].ColumnName); SqlDataAdapter adpt = new SqlDataAdapter(); adpt.InsertCommand = command; // Specify the number of records to be Inserted/Updated in one go. Default is 1. adpt.UpdateBatchSize = 500000; connection.Open(); int recordsInserted = adpt.Update(dtInsertRows); connection.Close(); } private static DataTable GetDataTable() { // You First need a DataTable and have all the insert values in it DataTable dtInsertRows = new DataTable(); dtInsertRows.Columns.Add("NAME"); for (int i = 0; i < 500000; i++) { DataRow drInsertRow = dtInsertRows.NewRow(); string name = "Name : " + i; drInsertRow["NAME"] = name; dtInsertRows.Rows.Add(drInsertRow); } return dtInsertRows; } static void sbc_SqlRowsCopied(object sender, SqlRowsCopiedEventArgs e) { Console.WriteLine("Number of records affected : " + e.RowsCopied.ToString()); } } }

    Read the article

  • How to Use Windows’ Advanced Search Features: Everything You Need to Know

    - by Chris Hoffman
    You should never have to hunt down a lost file on modern versions of Windows — just perform a quick search. You don’t even have to wait for a cartoon dog to find your files, like on Windows XP. The Windows search indexer is constantly running in the background to make quick local searches possible. This enables the kind of powerful search features you’d use on Google or Bing — but for your local files. Controlling the Indexer By default, the Windows search indexer watches everything under your user folder — that’s C:\Users\NAME. It reads all these files, creating an index of their names, contents, and other metadata. Whenever they change, it notices and updates its index. The index allows you to quickly find a file based on the data in the index. For example, if you want to find files that contain the word “beluga,” you can perform a search for “beluga” and you’ll get a very quick response as Windows looks up the word in its search index. If Windows didn’t use an index, you’d have to sit and wait as Windows opened every file on your hard drive, looked to see if the file contained the word “beluga,” and moved on. Most people shouldn’t have to modify this indexing behavior. However, if you store your important files in other folders — maybe you store your important data a separate partition or drive, such as at D:\Data — you may want to add these folders to your index. You can also choose which types of files you want to index, force Windows to rebuild the index entirely, pause the indexing process so it won’t use any system resources, or move the index to another location to save space on your system drive. To open the Indexing Options window, tap the Windows key on your keyboard, type “index”, and click the Indexing Options shortcut that appears. Use the Modify button to control the folders that Windows indexes or the Advanced button to control other options. To prevent Windows from indexing entirely, click the Modify button and uncheck all the included locations. You could also disable the search indexer entirely from the Programs and Features window. Searching for Files You can search for files right from your Start menu on Windows 7 or Start screen on Windows 8. Just tap the Windows key and perform a search. If you wanted to find files related to Windows, you could perform a search for “Windows.” Windows would show you files that are named Windows or contain the word Windows. From here, you can just click a file to open it. On Windows 7, files are mixed with other types of search results. On Windows 8 or 8.1, you can choose to search only for files. If you want to perform a search without leaving the desktop in Windows 8.1, press Windows Key + S to open a search sidebar. You can also initiate searches directly from Windows Explorer — that’s File Explorer on Windows 8. Just use the search box at the top-right of the window. Windows will search the location you’ve browsed to. For example, if you’re looking for a file related to Windows and know it’s somewhere in your Documents library, open the Documents library and search for Windows. Using Advanced Search Operators On Windows 7, you’ll notice that you can add “search filters” form the search box, allowing you to search by size, date modified, file type, authors, and other metadata. On Windows 8, these options are available from the Search Tools tab on the ribbon. These filters allow you to narrow your search results. If you’re a geek, you can use Windows’ Advanced Query Syntax to perform advanced searches from anywhere, including the Start menu or Start screen. Want to search for “windows,” but only bring up documents that don’t mention Microsoft? Search for “windows -microsoft”. Want to search for all pictures of penguins on your computer, whether they’re PNGs, JPEGs, or any other type of picture file? Search for “penguin kind:picture”. We’ve looked at Windows’ advanced search operators before, so check out our in-depth guide for more information. The Advanced Query Syntax gives you access to options that aren’t available in the graphical interface. Creating Saved Searches Windows allows you to take searches you’ve made and save them as a file. You can then quickly perform the search later by double-clicking the file. The file functions almost like a virtual folder that contains the files you specify. For example, let’s say you wanted to create a saved search that shows you all the new files created in your indexed folders within the last week. You could perform a search for “datecreated:this week”, then click the Save search button on the toolbar or ribbon. You’d have a new virtual folder you could quickly check to see your recent files. One of the best things about Windows search is that it’s available entirely from the keyboard. Just press the Windows key, start typing the name of the file or program you want to open, and press Enter to quickly open it. Windows 8 made this much more obnoxious with its non-unified search, but unified search is finally returning with Windows 8.1.     

    Read the article

  • “Being Agile” Means No Documentation, Right?

    - by jesschadwick
    Ask most software professionals what Agile is and they’ll probably start talking about flexibility and delivering what the customer wants.  Some may even mention the word “iterations”.  But inevitably, they’ll say at some point that it means less or even no documentation.  After all, doesn’t creating, updating, and circulating painstakingly comprehensive documentation that everyone and their mother have officially signed off on go against the very core of Agile?  Of course it does!  But really, they’re missing the point! Read The Agile Manifesto. (No, seriously - read it now. It’s short. I’ll wait.)  It’s essentially a list of values.  More specifically, it’s a right-side/left-side weighted list of values:  “Value this over that”. Many people seem to get the impression that this is really a “good vs. bad” list and that those values on the right side are evil and should essentially be tossed on the floor.  This leads to the conclusion that in order to be Agile we must throw away our fancy expensive tools, document as little as possible, and scoff at the idea of a project plan.  This conclusion is quite convenient because it essentially means “less work, more productivity!” (particularly in regards to the documentation and project planning).  I couldn’t disagree with this conclusion more. My interpretation of the Manifesto targets “over” as the operative word.  It’s not just a list of right vs. wrong or good vs. bad.  It’s a list of priorities.  In other words, none of the concepts on the list should be removed from your development lifecycle – they are all important… just not equally important.  This is not a unique interpretation, in fact it says so right at the end of the manifesto! So, the next time your team sits down to tackle that big new project, don’t make the first order of business to outlaw all meetings, documentation, and project plans.  Instead, collaborate with both your team and the business members involved (you do have business members sitting in the room, directly involved in the project planning, right?) and determine the bare minimum that will allow all of you to work and communicate in the best way possible.  This often means that you can pick and choose which parts of the Agile methodologies and process work for your particular project and end up with an amalgamation of Waterfall, Agile, XP, SCRUM and whatever other methodologies the members of your team have been exposed to (my favorite is “SCRUMerfall”). The biggest implication of this is that there is no one way to implement Agile.  There is no checklist with which you can tick off boxes and confidently conclude that, “Yep, we’re Agile™!”  In fact, depending on your business and the members of your team, moving to Agile full-bore may actually be ill-advised.  Such a drastic change just ends up taking everyone out of their comfort zone which they inevitably fall back into by the end of the project.  This often results in frustration to the point that Agile is abandoned altogether because “we just need to ship something!”  Needless to say, this is far more devastating to a project. Instead, I offer this approach: keep it simple and take it slow.  If your business members or customers are only involved at the beginning phases and nowhere to be seen until the project is delivered, invite them to your daily meetings; encourage them to keep up to speed on what’s going on on a daily basis and provide feedback.  If your current process is heavy on the documentation, try to reduce it as opposed to eliminating it outright.  If you need a “TPS Change Request” signed in triplicate with a 5-day “cooling off period” before a change is implemented, try a simple bug tracking system!  Tighten the feedback loop! Finally, at the end of every “iteration” (whatever that means to you, as long as it’s relatively frequent), take as much time as you can spare (even if it’s an hour or so) and perform some kind of retrospective.  Learn from your mistakes.  Figure out what’s working for you and what’s not, then fix it.  Before you know it you’ve got a handful of iterations and/or projects under your belt and you sit down with your team to realize that, “Hey, this is working - we’re pretty Agile!”  After all, Agile is a Zen journey.  It’s a destination that you aim for, not force, and even if you never reach true “enlightenment” that doesn’t mean your team can’t be exponentially better off from merely taking the journey.

    Read the article

  • What’s New for Oracle Commerce? Executive QA with John Andrews, VP Product Management, Oracle Commerce

    - by Katrina Gosek
    Oracle Commerce was for the fifth time positioned as a leader by Gartner in the Magic Quadrant for E-Commerce. This inspired me to sit down with Oracle Commerce VP of Product Management, John Andrews to get his perspective on what continues to make Oracle a leader in the industry and what’s new for Oracle Commerce in 2013. Q: Why do you believe Oracle Commerce continues to be a leader in the industry? John: Oracle has a great acquisition strategy – it brings best-of-breed technologies into the product fold and then continues to grow and innovate them. This is particularly true with products unified into the Oracle Commerce brand. Oracle acquired ATG in late 2010 – and then Endeca in late 2011. This means that under the hood of Oracle Commerce you have market-leading technologies for cross-channel commerce and customer experience, both designed and developed in direct response to the unique challenges online businesses face. And we continue to innovate on capabilities core to what our customers need to be successful – contextual and personalized experience delivery, merchant-inspired tools, and architecture for performance and scalability. Q: It’s not a slow moving industry. What are you doing to keep the pace of innovation at Oracle Commerce? John: Oracle owes our customers the most innovative commerce capabilities. By unifying the core components of ATG and Endeca we are delivering on this promise. Oracle Commerce is continuing to innovate and redefine how commerce is done and in a way that drive business results and keeps customers coming back for experiences tailored just for them. Our January and May 2013 releases not only marked the seventh significant releases for the solution since the acquisitions of ATG and Endeca, we also continue to demonstrate rapid and significant progress on the unification of commerce and customer experience capabilities of the two commerce technologies. Q: Can you tell us what was notable about these latest releases under the Oracle Commerce umbrella? John: Specifically, our latest product innovations give businesses selling online the ability to get to market faster with more personalized commerce experiences in the following ways: Mobile: the latest Commerce Reference Application in this release offers a wider range of examples for online businesses to leverage for iOS development and specifically new iPad reference capabilities. This release marks the first release of the iOS Universal application that serves both the iPhone and iPad devices from a single download or binary. Business users can now drive page content management and layout of search results and category pages, as well as create additional storefront elements such as categories, facets / dimensions, and breadcrumbs through Experience Manager tools. Cross-Channel Commerce: key commerce platform capabilities have been added to support cross-channel commerce, including an expanded inventory model to maintain inventory for stores, pickup in stores and Web-based returns. Online businesses with in-store operations can now offer advanced shipping options on the web and make returns and exchange logic easily available on the web. Multi-Site Capabilities: significant enhancements to the Commerce Platform multi-site architecture that allows business users to quickly launch and manage multiple sites on the same cluster and share data, carts, and other components. First introduced in 2010, with this latest release business users can now partition or share customer profiles, control users’ site-based access, and manage personalization assets using site groups. Internationalization: continued language support and enhancements for business user tools as well and search and navigation. Guided Search now supports 35 total languages with 11 new languages (including Danish, Arabic, Norwegian, Serbian Cyrillic) added in this release. Commerce Platform tools now include localized support for 17 locales with 4 new languages (Danish, Portuguese (European), Finnish, and Thai). No development or customization is required in order for business users to use the applications in any of these supported languages. Business Tool Experience: valuable new Commerce Merchandising features include a new workflow for making emergency changes quickly and increased visibility into promotions rules and qualifications in preview mode. Oracle Commerce business tools continue to become more and more feature rich to provide intuitive, easy- to-use (yet powerful) capabilities to allow business users to manage content and the shopping experience. Commerce & Experience Unification: demonstrable unification of commerce and customer experience capabilities include – productized cartridges that provide supported integration between the Commerce Platform and Experience Management tools, cross-channel returns, Oracle Service Cloud integration, and integrated iPad application. The mission guiding our product development is to deliver differentiated, personalized user experiences across any device in a contextual manner – and to give the business the best tools to tune and optimize those user experiences to meet their business objectives. We also need to do this in a way that makes it operationally efficient for the business, keeping the overall total cost of ownership low – yet also allows the business to expand, whether it be to new business models, geographies or brands. To learn more about the latest Oracle Commerce releases and mission, visit the links below: • Hear more from John about the Oracle Commerce mission • Hear from Oracle Commerce customers • Documentation on the new releases • Listen to the Oracle ATG Commerce 10.2 Webcast • Listen to the Oracle Endeca Commerce 3.1.2 Webcast

    Read the article

  • On Contract Employment

    - by kerry
    I am going to post about something I don’t post about a lot, the business side of development.  Scott at the antipimp does a good job of explaining how contracts work from a business perspective.  I am going to give a view from the ground. First, a little background on myself.  I have recently taken a 6 month contract after about 8 years of fulltime employment.  I have 2 kids, and a stay at home wife.  I took this contract opportunity because I wanted to try it on for size.  I have always wondered whether I would like doing contracts over fulltime employment.  So, in keeping with the theme of this blog I will write this down now so that I may reference it later. ALL jobs are temporary! Right now you may not realize it, most people simply ignore it, but EVERY job is temporary.  Everyone should be planning for life after the money stops coming in.  Sadly, most people do not.  Contracting pushes this issue to the forefront, making you deal with it.  After a month on a contract, I am happy to say that I am saving more than I ever saved in a fulltime position.  Hopefully, I will be ready in case of an extended window of unemployment between contracts. Networking I find it extremely gratifying getting to know people.  It is especially beneficial when moving to a new city.  What better way to go out and meet people in your field than to work a few contracts?  6 months of working beside someone and you get to know them pretty well.  This is one of my favorite aspects. Technical Agility Moving between IS shops takes (or molds you into) a flexible person.  You have to be able to go in and hit the ground running.  This means you need to be able to sit down and start work on a large codebase working in a language that you may or may not have that much experience in.  It is also an excellent way to learn new languages and broaden your technical skill set.  I took my current position to learn Ruby.  A month ago, I had only used it in passing, but now I am using it every day.  It’s a tragedy in this field when people start coding for the joy and love of coding, then become deeply entrenched in their companies methods and technologies that it becomes a just a job. Less Stress I am not talking about the kind of stress you get from a jackass boss.  I am talking about the kind of stress I (or others) experience about planning and future proofing your code.  Not saying I stay up at night worrying whether we have done it right, if that code I wrote today is going to bite me later, but it still creeps around in the dark recesses of my mind.  Careful though, I am not suggesting you write sloppy code; just defer any large architectural or design decisions to the ‘code owners’. Flexible Scheduling It makes me very happy to be able to cut out a few hours early on a Friday (provided the work is done) and start the weekend off early by going to the pool, or taking the kids to the park.  Contracting provides you this opportunity (mileage may vary).  Most of your fulltime brethren will not care, they will be jealous that they’re corporate policy prevents them from doing the same.  However, you must be mindful of situations where this is not appropriate, and don’t over do it.  You are there to work after all. Affirmation of Need Have you ever been stuck in a job where you thought you were underpaid?  Have you ever been in a position where you felt like there was not enough workload for you?  This is not a problem for contractors.  When you start a contract it is understood that you are needed, and the employer knows that you are happy with the terms. Contracting may not be for everyone.  But, if you develop a relationship with a good consulting firm, keep their clients happy, then they will keep you happy.  They want you to work almost as much as you do.  Just be sure and plan financially for any windows of unemployment.

    Read the article

  • How to build Open JavaFX for Android.

    - by PictureCo
    Here's a short recipe for baking JavaFX for Android dalvik. We will need just a few ingredients but each one requires special care. So let's get down to the business.  SourcesThe first ingredient is an open JavaFX repository. This should be piece of cake. As always there's a catch. You probably know that dalvik is jdk6 compatible  and also that certain APIs are missing comparing to good old java vm from Oracle.  Fortunately there is a repository which is a backport of regular OpenJFX to jdk7 and going from jdk7 to jdk6 is possible. The first thing to do is to clone or download the repository from https://bitbucket.org/narya/jfx78. Main page of the project says "It works in some cases" so we will presume that it will work in most cases As I've said dalvik vm misses some APIs which would lead to a build failures. To get them use another compatibility repository which is available on GitHub https://github.com/robovm/robovm-jfx78-compat. Download the zip and unzip sources into jfx78/modules/base.We need also a javafx binary stubs. Use jfxrt.jar from jdk8.The last thing to download are freetype sources from http://freetype.org. These will be necessary for native font rendering. Toolchain setup I have to point out that these instructions were tested only on linux. I suppose they will work with minimal changes also on Mac OS. I also presume that you were able to build open JavaFX. That means all tools like ant, gradle, gcc and jdk8 have been installed and are working all right. In addition to this you will need to download and install jdk7, Android SDK and Android NDK for native code compilation.  Installing all of them will take some time. Don't forget to put them in your path. export ANDROID_SDK=/opt/android-sdk-linux export ANDROID_NDK=/opt/android-ndk-r9b export JAVA_HOME=/opt/jdk1.7.0 export PATH=$JAVA_HOME/bin:$ANDROID_SDK/tools:$ANDROID_SDK/platform-tools:$ANDROID_NDK FreetypeUnzip freetype release sources first. We will have to cross compile them for arm. Firstly we will create a standalone toolchain for cross compiling installed in ~/work/ndk-standalone-19. $ANDROID_NDK/build/tools/make-standalone-toolchain.sh  --platform=android-19 --install-dir=~/work/ndk-standalone-19 After the standalone toolchain has been created cross compile freetype with following script: export TOOLCHAIN=~/work/freetype/ndk-standalone-19 export PATH=$TOOLCHAIN/bin:$PATH export FREETYPE=`pwd` ./configure --host=arm-linux-androideabi --prefix=$FREETYPE/install --without-png --without-zlib --enable-shared sed -i 's/\-version\-info \$(version_info)/-avoid-version/' builds/unix/unix-cc.mk make make install It will compile and install freetype library into $FREETYPE/install. We will link to this install dir later on. It would be possible also to link openjfx font support dynamically against skia library available on Android which already contains freetype. It creates smaller result but can have compatibility problems. Patching Download patches javafx-android-compat.patch + android-tools.patch and patch jfx78 repository. I recommend to have look at patches. First one android-compat.patch updates openjfx build script, removes dependency on SharedSecret classes and updates LensLogger to remove dependency on jdk specific PlatformLogger. Second one android-tools.patch creates helper script in android-tools. The script helps to setup javaFX Android projects. Building Now is time to try the build. Run following script: JAVA_HOME=/opt/jdk1.7.0 JDK_HOME=/opt/jdk1.7.0 ANDROID_SDK=/opt/android-sdk-linux ANDROID_NDK=/opt/android-ndk-r9b PATH=$JAVA_HOME/bin:$ANDROID_SDK/tools:$ANDROID_SDK/platform-tools:$ANDROID_NDK:$PATH gradle -PDEBUG -PDALVIK_VM=true -PBINARY_STUB=~/work/binary_stub/linux/rt/lib/ext/jfxrt.jar \ -PFREETYPE_DIR=~/work/freetype/install -PCOMPILE_TARGETS=android If everything went all right the output is in build/android-sdk Create first JavaFX Android project Use gradle script int android-tools. The script sets the project structure for you.   Following command creates Android HelloWorld project which links to a freshly built javafx runtime and to a HelloWorld application. NAME is a name of Android project. DIR where to create our first project. PACKAGE is package name required by Android. It has nothing to do with a packaging of javafx application. JFX_SDK points to our recently built runtime. JFX_APP points to dist directory of javafx application. (where all application jars sit) JFX_MAIN is fully qualified name of a main class. gradle -PDEBUG -PDIR=/home/user/work -PNAME=HelloWorld -PPACKAGE=com.helloworld \ -PJFX_SDK=/home/user/work/jfx78/build/android-sdk -PJFX_APP=/home/user/NetBeansProjects/HelloWorld/dist \ -PJFX_MAIN=com.helloworld.HelloWorld createProject Now cd to the created project and use it like any other android project. ant clean, debug, uninstall, installd will work. I haven't tried it from any IDE Eclipse nor Netbeans. Special thanks to Stefan Fuchs and Daniel Zwolenski for the repositories used in this blog post.

    Read the article

  • Trying to keep up with Technology and Blogging

    - by Dave Campbell
    A little bit of everything... The heading above got changed a bunch during writing and I finally settled on that because this has become a 'stream of consciousness' post... or maybe a stream of UNconsciousness :) If you've noticed, my blogging has been a tad slow this fall. There's been a lot going on personally. But then again, I haven't skipped anybody either. Rather than go through ALL the blogs I have aggregated, and take a week to get to the bottom, at some point in the last year, I had moved the lists around so I now have "SilverlightMVPs", "Very Prolific", "WP7", and "Top Checks". This is a total of about 250 of the more prolific bloggers. Those 250 bloggers have kept me very busy up through about //BUILD. Sometimes it would take all week to go through just that list putting out 13 posts per blog per day... but not anymore. This weekend I made it all the way through the BIG list... close to 700 blogs, and if you read my blog, you know I had one medium day (Saturday), and yesterday was very short. Why is this? To be honest, I don't know... is everybody busy re-tooling, or churning waiting for direction? I have a short list of WinRT/Metro/W8 folks... maybe I need to be pointed to more of them... but my old favorites are not pumping out posts as they have in the past. I said before that I am attracted to Metro, and I've already got My first Metro app post out there, and were it not for working with the new site, I'd have had another out last weekend... so definitely look for more from me in that area. New Site? Did I say 'new site' ? oops... didn't mean to do that, but now that the cat is out of the bag, I may as well continue... While at //BUILD, I discussed a re-tooling of SilverlightCream with lots of folks... probably more than wanted to hear about it to be honest! ... it's needed a facelift, and there's stuff on there that never worked right, plus there's a lot of manual effort that goes into a blog post. In an effort to alleviate all the above, Michael Washington and I have been working on the next iteration of SilverlightCream. Not wanting to lose that branding or mess with any saved links, I decided to change from a somewhat funky name to something more professional. I also decided to put my blog on the site, and tie my main announcement twitter feed to the site as well. The way things sit today, there are 3 different names in those locations and it's gotta be confusing for folks just stumbling in. We're going to do a series of posts talking about the site and the new backend processing (hint: Michael Washington is responsible for it, so you can take a guess at the technology), but for now, we'd like some eyes on the front end of the site, and some submittals using it to see if it falls over somewhere that we haven't tried. So... I'm going to give it up... the new site is Windows Dev News. The Twitter feed is @WindowsDevNews, and the blog will be on the site as well at Windows Dev News Blog. I've got the RSS Feed on Feedburner too, so I think all the nuts and bolts are good to go. The submittal and search pages work, as does the blog page. You'll notice we used the MasterPage from SilverlightCream to get started. That will probably change, but it's just the visual... the content is the important part. Other missing things are the tracking and 'Skim' page that we will eventually have up and running. There are some formatting issues with the blog posts but if you hang in there with me, those will be taken care of. If you're a blogger, please submit through the site and let me know if you find any problems. If you're a reader, please add this feed and site. I'll be duplicating the effort for a while but at some point will stop that foolishness. We won't lose the data from SilverlightCream though, so keep using that as a search resource... I have hopes to pull that database over to WindowsDevNews, or link to it in some manner... that part isn't set in jello yet, but it will not be lost. So there it is... let me know what you think, send me your WinRT/Metro/W8 postings along with your Silverlight and WP7 posts... it's not that different, it's just more. Stay in the 'Light

    Read the article

  • IOUG and Oracle Enterprise Manager User Community Twitter Chat and Sessions at OpenWorld

    - by Anand Akela
    Like last many years, we will have annual Oracle Users Forum on Sunday, September 30th, 2012 at Moscone West, Levels 2 & 3 . It will be open to all registered attendees of Oracle Open World and conferences running from September 29 to October 5, 2012 . This will be a great  opportunity to meet with colleagues, peers, and subject matter experts to share best practices, tips, and techniques around Oracle technologies. You could sit in on a special interest group (SIG) meeting or session and learn how to get more out of Oracle technologies and applications. IOUG and Oracle Enterprise Manager team invites you to join a Twitter Chat on Sunday, Sep. 30th from 11:30 AM to 12:30 PM.  IOUG leaders, Enterprise Manager SIG contributors and many Oracle Users Forum speakers will answer questions related to their experience with Oracle Enterprise Manager and the activities and resources available for  Enterprise Manager SIG members. You can participate in the chat using hash tag #em12c on Twitter.com or by going to  tweetchat.com/room/em12c      (Needs Twitter credential for participating).  Feel free to join IOUG and Enterprise team members at the User Group Pavilion on 2nd Floor, Moscone West. Here is the complete list of Oracle Enterprise Manager sessions during the Oracle Users Forum : Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Time Session Title Speakers Location 8:00AM - 8:45AM UGF4569 - Oracle RAC Migration with Oracle Automatic Storage Management and Oracle Enterprise Manager 12c VINOD Emmanuel -Database Engineering, Dell, Inc. Wendy Chen - Sr. Systems Engineer, Dell, Inc. Moscone West - 2011 8:00AM - 8:45AM UGF10389 -  Monitoring Storage Systems for Oracle Enterprise Manager 12c Anand Ranganathan - Product Manager, NetApp Moscone West - 2016 9:00AM - 10:00AM UGF2571 - Make Oracle Enterprise Manager Sing and Dance with the Command-Line Interface Ray Smith - Senior Database Administrator, Portland General Electric Moscone West - 2011 10:30AM - 11:30AM UGF2850 - Optimal Support: Oracle Enterprise Manager 12c Cloud Control, My Oracle Support, and More April Sims - DBA, Southern Utah University Moscone West - 2011 11:30AM - 12:30PM IOUG and Oracle Enterprise Manager Joint Tweet Chat  Join IOUG Leaders, IOUG's Enterprise Manager SIG Contributors and Speakers on Twitter and ask questions related to practitioner's experience with Oracle Enterprise Manager and the new IOUG 's Enterprise Manager SIG. To attend and participate in the chat, please use hash tag #em12c on twitter.com or your favorite Twitter client. You can also go to tweetchat.com/room/em12c to watch the conversation or login with your twitter credentials to ask questions. User Group Pavilion 2nd Floor, Moscone West 12:30PM-2:00PM UGF5131 - Migrating from Oracle Enterprise Manager 10g Grid Control to 12c Cloud Control    Leighton Nelson - Database Administrator, Mercy Moscone West - 2011 2:15PM-3:15PM UGF6511 -  Database Performance Tuning: Get the Best out of Oracle Enterprise Manager 12c Cloud Control Mike Ault - Oracle Guru, TEXAS MEMORY SYSTEMS INC Tariq Farooq - CEO/Founder, BrainSurface Moscone West - 2011 3:30PM-4:30PM UGF4556 - Will It Blend? Verifying Capacity in Server and Database Consolidations Jeremiah Wilton - Database Technology, Blue Gecko / DatAvail Moscone West - 2018 3:30PM-4:30PM UGF10400 - Oracle Enterprise Manager 12c: Monitoring, Metric Extensions, and Configuration Best Practices Kellyn Pot'Vin - Sr. Technical Consultant, Enkitec Moscone West - 2011 Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

    Read the article

  • Going to the Score Cards - Exceptional DBA Awards 2011

    - by Rodney
    This year marks my 4th year as a judge for the Exceptional DBA Awards, founded by Red Gate in 2008 to "recognize the essential but often overlooked contributions of DBAs, the unsung heroes of the IT community." As a professional DBA myself I have been honored to participate as a judge. It is not an easy job because there is a voluminous amount of nominees from all over the world. Each judge has to read through every word of the nominee's answers, deciding what makes each person special and stand out amongst their peers. What drives them? What single element of their submission will shine above all others? It is my hope that what I am about to divulge to you as a judge will prompt you to think about yourself or someone you know and decide that you may be the exceptional DBA who can take home the gold at this year's award ceremony in Seattle. We are more than a few weeks into the nomination process and there are quite a number of submissions already. I can not tell you how many as that would not be fair. I can say it is not 1 million or more. I can also say that it is not 100,000. But that is all I can say about that. However, I can tell you that it is enough this year that we are breaking records on the number of people who have been influenced, inspired or intrigued by the awards in the past. I remember them all like it were yesterday. fuzzy thought cloud here. It was a rainy day in Seattle (all memories for each award ceremony will start thusly) and I was in the hotel going over my notes on what I wanted to say about the winner of the 2008 Red Gate Exceptional DBA Award. The notes were on index cards that I had either bought or stolen from my wife, I do not recall, but I was nervous which was unlike me. This was, after all, a big night for the winner. Of course, we, the judges and the SQL community, had already decided the winner and now all that remained was to present the award. The room was packed. It was Casino night, sponsored by sqlservercentral.com. Money (fake), drinks (not fake) and camaraderie flowed through the room. Dan McClain won the award that year. He worked for Anheuser-Busch at the time. I promise that did not influence my decision. We presented Dan with the award. He was very proud of this achievement, rightfully so, as was the SQL community for him. I spoke with Dan throughout the conference and realized how huge this award was for him, not just personally but professionally. It was a rainy day in Seattle in 2009 and I was nervous. I was asked to speak to a group of people again as a judge for the Exceptional DBA Awards. This year, Josef Richberg would be the recipient of the award, but he would not be able to attend. We all prayed for him as he fought through an illness and congratulated him for his accomplishments as a DBA for his company. He got better and sallied forth and continued to give back to the SQL community that he saw as one big family. In 2010, and I am getting ahead of myself, he was asked to be a judge himself for the very award he had just received the year before. It was a sunny day in Seattle and I missed it, because it was in July and I was not there. It was a rainy day in Seattle and it is 2010 and Tracy Hamlin enters a submission that blows this judge away. She is managing a 50 Terabyte distributed database ("50 Gigabytes! Are you kidding me!!!", Rodney jokes.)  and loves her daily job as a DBA working with developers, mentoring them and teaching them best practices with kindness and patience. She is a people person who just happens to have 10+ years experience with RDBMS'. She wins the award and goes on to be recognized as famous at PASS. It will be a rainy day in Seattle this year when I sit amongst my old constituent judges and friends, Brad McGehee, http://www.simple-talk.com/books/sql-books/how-to-become-an-exceptional-dba,-2nd-edition/, Steve Jones, whom we all know and love at http://www.sqlservercentral.com and a young upstart to the SQL Community, this cat named Brent Ozar to announce the 2011 winner. I personally have not heard of Brent but I am told I have interviewed him for a DBA position several years ago and turned him down, http://www.brentozar.com/archive/2011/05/exceptional-dba-contest/ . I hope that did not jeopardize his future in the SQL world. I am a big hearted oaf and would feel horrible. Hopefully I will meet him at PASS and we can work this all out and I can help him get a DBA job. The rain has stopped and a new year is upon us. The stakes are high...the competition is fierce...the rewards are incredible. The entry form awaits you. http://www.exceptionaldba.com/ I very much look forward to meeting you and presenting the award to you in front of hundreds of your envious but proud peers as the new Exceptional DBA for 2011 at the PASS Summit. Here is what you could win: The Exceptional DBA of the Year receives full conference registration for the 2011 PSS Summit in Seattle, where the awards ceremony will take place, four nights' hotel accommodation, and $300 towards travel expenses. They will also be featured on Simple-Talk. Are you ready? Are you nervous?

    Read the article

  • Developer Training – Difficult Questions and Alternative Perspective – Part 3

    - by pinaldave
    Developer Training - Importance and Significance - Part 1 Developer Training – Employee Morals and Ethics – Part 2 Developer Training – Difficult Questions and Alternative Perspective - Part 3 Developer Training – Various Options for Developer Training – Part 4 Developer Training – A Conclusive Summary- Part 5 Congratulations!  You are now a fully trained developer!  You spent hours in a classroom, watching webinars, and reading materials.  You are now more educated and more prepared than ever before.  Now what? Stay or Quit The simple answer is that you now have two options – stay where you are or move on to a new job.  Even though you might now be smarter than you have ever felt before, this can still be a tough decision to make.  You feel extra trained and ready for a promotion or a raise, but you and your employer might not see eye to eye on this issue.  The logical conclusion is to go on a job hunt, but that might not be the most ethical thing to do. Click Image to Enlarge Manager’s Perspective Click Image to Enlarge Try to see the issue from your manager’s perspective.  You feel that you have just spent a lot of time and energy getting trained, and you should be rewarded.  But they have invested their time and energy in you.  They might see the training as a way to help you complete the goals they require from you, or as a way to help you complete tasks that will ultimately end in a reward or promotion. Moral Compass As in most cases, honesty is the best policy.  Be open with your manager about your expectations, and ask them to explain their goals.  When there is open and honest communication, everyone can walk away happy.  If you’re unable to discuss with your manager for one reason or another, just try to keep the company policy in mind and follow your own moral compass.  If all else fails, and your company is unwilling to make allowances for your new value, offer to pay the company back for the training before moving on your way. Whether you stay at your old job or move on to a new one, you are still faced with the question of what you’re going to do with all your new knowledge.  If you feel comfortable, offer to train others around you who are interested in the same subject.  This can look very good on your resume, and if you are working in a team environment it is sure to help you in the long run! What Next? You can even offer to train other trainers at the company – managers, those above you, or even report back to your original trainer about how your education is helping you in the work place.  Obviously this should be completely voluntary on the trainer’s part.  Taking advice from a “newbie” may not be their favorite idea, but it could also show the company that you are open to expanding your horizons and being helpful to everyone around you. Last in Line for Opportunity Click Image to Enlarge At this time, let us address a subject related to training and what to do with it – what if you are always overlooked for training?  This can as thorny a problem as receiving training in the first place.  The best advice is to let your supervisors know that you are always open to training and very interested in certain topics.  If you are consistently passed over, be patient.  Your turn will probably come, but the company as a whole has to focus on other problems at the moment.  If you feel that there are more personal issues at play, be sure to bring this up with your supervisor in a calm and professional manager so that everything can be worked out best for both parties. You, Yourself and Your Future! If all else fails, offer to pay for training yourself.  Perhaps money problems are at the root of being passed over.  Even if there are other reasons, offering to pay your own way shows your dedication and could work out well for you in the long run.  Always remember – in life you have to go out and make your own way, you cannot always sit and wait for things to land in your lap. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Developer Training, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • SQL Developer Data Modeler v3.3 Early Adopter: Collaborative Design via Excel?

    - by thatjeffsmith
    As you may have heard last week, we have a new version of Oracle SQL Developer Data Modeler now available as an Early Adopter release. Version 3.3 has quite a few new features and I’ll be previewing them here. Today’s topic is our new Excel integration. It builds off of last week’s lesson: Search, so you may want to go read that first. They say it takes a village to raise a child. I say it takes a team to build a data model. You have your techie folks, your business folks, your in-betweeners, and your database geeks. Who gets to define how customers are represented and stored in your database? That data lives forever, so you better get it right from the beginning, or you’ll be living in a hacker’s paradise for years to come. Lots of good rantings, ravings, and advice on this topic in general on Karen Lopez’s (@datachick) blog. But let’s say you are the primary modeler on a project. You dutifully interview the business folks for their requirements. You sit down and start to model and think you’re pretty close. Now you need someone to confirm your assumptions and provide some feedback. Do you send your model over? Take a screenshot and blow it up on a whiteboard? Export to HTML and let them take a magic marker to their monitors? Or maybe you bite the bullet and install your modeling software on their desktops and take the hours or days required to train them up on how to use the the tool. Wouldn’t it be nice if they could just mark up their corrections in Excel and let you suck the updates back in? This is what we have started to build in Oracle SQL Developer Data Modeler. Let’s say you have a new table called ‘UT_STARTUPS.’ It looks a little something like this: A table in Oracle SQL Developer Data Modeler What I would like to do is have my team or co-worker review how I have defined those columns. Perhaps TIMESTAMP is overkill or maybe the column names themselves aren’t up to snuff. What I am going to do is now search for all the columns in my table, then export that to Excel. So do a search for UT_STARTUPS. Search, filter, then Report With the filter set to ‘Columns,’ if I do a report I’ll be only getting the columns that are resolving to my search term. So as long as my table name is unique in the model, I should get what I’m looking for. Here’s what I see when I click on the Report button: XLS or XLSX, either format is just fine I want to decide how the Column data is exported to Excel though, so I’m going to create a report template that I can use going forward. So click the ‘Manage’ button and setup a new template. I’m going to call mine ‘CollaborativeDevelopment.’ The templates allow me to define what properties are included in the reports. Once this is set, I’ll have the XLS file generated, and get to work Now let the Excel junkies do their stuff Note that not ALL of the report properties are update-able (yes, I made up a new word there) via Excel. We’ll have the full list of properties documented going forward, but in my Excel sheet, note that I can’t change the table name or the data types for the columns. I’m going to update some column names and supply ‘nice’ comments so the database users know what’s what. Here’s my input for the designer/architect/database dude: Be kind, please rew…use comments. Save the file, email it back to your modeler. Update the model from Excel That’s right, it’s a right mouse click from your model in the tree If everything goes right, you’ll see a nice confirmation message: It’s alive! Another to-do item on tap – making this dialog more informative. We’ll be showing exactly what in your model was updated from Excel. Let’s take another look at the model now Voila! Why are we doing this again? The goal is to reduce the number of round-trips from the modeler and the business process owner. One is used to working with Excel – why not allow them to mark up their changes in the tool they already know? This is an early adopter release and I anticipate this feature getting a good bit of tuning up before we release. Why don’t you download 3.3, give it a whirl, and let us know what you think?

    Read the article

  • Weekend With #iPad

    - by andrewbrust
    Saturday morning, I got up, got dressed and took a 7-minute walk up to the Apple Store in New York’s Meatpacking District to pick up my reserved iPad.  This precinct, which borders Greenwich Village (where I live and grew up) was, when I was a kid, a very industrial and smelly neighborhood during the day  and a rough neighborhood at night.  So imagine my sense of irony as I walked up Hudson Street towards 14th Street, to go wait in line with a bunch of hipsters to buy an iPad on launch day. Numerous blue T-shirt-clad Apple store workers were on hand to check people in to the line specifically identified for people who had reserved an iPad.  Others workers passed out water and all of them, I kid you not, applauded people as they got their chance to go into the store and buy their devices.  They also cheered people and yelled “congratulations” as they left.  The event had all the charm of a mass wedding officiated by Reverend Sung Myung Moon.  Once inside, a nice dude named Trey, with lots of tattoos on his calves, helped me and I acquired my device in short order.  Another guy helped me activate the device, which was comical, because that has to be done through iTunes, which I hadn’t logged into in a while. Turns out my user id was my email address from the company I sold 5 1/2 years ago.  Who knew?  Regardless, I go the device working, packed up and left the store, shuddering as I was cheered and congratulated.  By this time (about 10:30am) the line for reserved units and even walk-ins, was gone.  The iPhone launch this was not. As much as I detested the Apple Store experience, I must say the device is really nice.  the screen is bright, the colors are bold, and the experience is ultra-smooth.  I quickly tested Safari, YouTube, Google Maps, and then installed a few apps, including the New York Times Editors’ Choice and a couple of Twitter clients. Some initial raves: Google Maps and Street View on the iPad is just amazing.  The screen is full-size like a PC or Mac, but it’s right in front of you and responding to taps and flicks and pinches and it’s really engulfing.  Video and photos are really nice on this device, despite the fact that 16:9 and anamorphic aspect ration content is letter boxed.  It still looks amazing.  And apps that are designed especially for the iPad, including The Weather Channel and Gilt and Kayak just look stunning.  The richness, the friendly layout, the finger-friendly UIs, and the satisfaction of not having a keyboard between you and the information you’re managing, while you sit on a couch or an easy chair, is just really a beautiful thing.  The mere experience of seeing these apps’ splash screens causes a shiver and Goosebumps.  Truly.  The iPad is not a desktop machine, and it’s not pocket device.  That doesn’t mean it’s useless though.  It’s the perfect “couchtop” computer. Now some downsides: the WiFi radio seems a bit flakey.  More than a few times, I have had to toggle the WiFi off and back on to get it to connect properly.  Worse yet, the iPad is totally bamboozled by the fact that I have four WiFi access points in my house, each with the same SSID.  My laptops are smart enough to roam from one to the other, but the iPad seems to maintain an affinity for the downstairs access point, even if I’m turning it on two flights up.  Telling the iPad to “forget” my WiFi network and then re-associate with it doesn’t help. More downers: as you might expect, there are far more applications developed for the iPhone than the iPad.  And although iPhone apps run on the iPad, that provides about the same experience as watching standard def on a big HD flat panel, complete with the lousy choice of thick black borders or zooming the picture in to fill the screen.  And speaking of iPhone Apps, I can’t get the Sonos one to work.  Ideally, they’d have a dedicated iPad app and it would work on the first try.  And the iPad is just as bad as any netbook when it comes to being a magnet for fingerprints.  The lack of multi-tasking is quite painful too – truly, I don’t mind if only one app can be active at once, but the lack of ability to switch between apps, and the requirement to return to the home screen and re-launch a previous app to switch back, is already old and I’ve had the thing less than 48 hours. These are just initial impressions.  I’ll have a fuller analysis soon, after I’ve had some more break-in time with my new toy.  I’ll be thinking not just about the iPad and iPhone but also about Android, the 2.1 update for which was pushed to my Droid today, and Windows Phone 7, whose “hub” concept I now understand the value of.  This has been a great year for alternative computing devices, and I see no net downside for Apple, Google or Microsoft.  Exciting times.

    Read the article

  • F# for the C# Programmer

    - by mbcrump
    Are you a C# Programmer and can’t make it past a day without seeing or hearing someone mention F#?  Today, I’m going to walk you through your first F# application and give you a brief introduction to the language. Sit back this will only take about 20 minutes. Introduction Microsoft's F# programming language is a functional language for the .NET framework that was originally developed at Microsoft Research Cambridge by Don Syme. In October 2007, the senior vice president of the developer division at Microsoft announced that F# was being officially productized to become a fully supported .NET language and professional developers were hired to create a team of around ten people to build the product version. In September 2008, Microsoft released the first Community Technology Preview (CTP), an official beta release, of the F# distribution . In December 2008, Microsoft announced that the success of this CTP had encouraged them to escalate F# and it is now will now be shipped as one of the core languages in Visual Studio 2010 , alongside C++, C# 4.0 and VB. The F# programming language incorporates many state-of-the-art features from programming language research and ossifies them in an industrial strength implementation that promises to revolutionize interactive, parallel and concurrent programming. Advantages of F# F# is the world's first language to combine all of the following features: Type inference: types are inferred by the compiler and generic definitions are created automatically. Algebraic data types: a succinct way to represent trees. Pattern matching: a comprehensible and efficient way to dissect data structures. Active patterns: pattern matching over foreign data structures. Interactive sessions: as easy to use as Python and Mathematica. High performance JIT compilation to native code: as fast as C#. Rich data structures: lists and arrays built into the language with syntactic support. Functional programming: first-class functions and tail calls. Expressive static type system: finds bugs during compilation and provides machine-verified documentation. Sequence expressions: interrogate huge data sets efficiently. Asynchronous workflows: syntactic support for monadic style concurrent programming with cancellations. Industrial-strength IDE support: multithreaded debugging, and graphical throwback of inferred types and documentation. Commerce friendly design and a viable commercial market. Lets try a short program in C# then F# to understand the differences. Using C#: Create a variable and output the value to the console window: Sample Program. using System;   namespace ConsoleApplication9 {     class Program     {         static void Main(string[] args)         {             var a = 2;             Console.WriteLine(a);             Console.ReadLine();         }     } } A breeze right? 14 Lines of code. We could have condensed it a bit by removing the “using” statment and tossing the namespace. But this is the typical C# program. Using F#: Create a variable and output the value to the console window: To start, open Visual Studio 2010 or Visual Studio 2008. Note: If using VS2008, then please download the SDK first before getting started. If you are using VS2010 then you are already setup and ready to go. So, click File-> New Project –> Other Languages –> Visual F# –> Windows –> F# Application. You will get the screen below. Go ahead and enter a name and click OK. Now, you will notice that the Solution Explorer contains the following: Double click the Program.fs and enter the following information. Hit F5 and it should run successfully. Sample Program. open System let a = 2        Console.WriteLine a As Shown below: Hmm, what? F# did the same thing in 3 lines of code. Show me the interactive evaluation that I keep hearing about. The F# development environment for Visual Studio 2010 provides two different modes of execution for F# code: Batch compilation to a .NET executable or DLL. (This was accomplished above). Interactive evaluation. (Demo is below) The interactive session provides a > prompt, requires a double semicolon ;; identifier at the end of a code snippet to force evaluation, and returns the names (if any) and types of resulting definitions and values. To access the F# prompt, in VS2010 Goto View –> Other Window then F# Interactive. Once you have the interactive window type in the following expression: 2+3;; as shown in the screenshot below: I hope this guide helps you get started with the language, please check out the following books for further information. F# Books for further reading   Foundations of F# Author: Robert Pickering An introduction to functional programming with F#. Including many samples, this book walks through the features of the F# language and libraries, and covers many of the .NET Framework features which can be leveraged with F#.       Functional Programming for the Real World: With Examples in F# and C# Authors: Tomas Petricek and Jon Skeet An introduction to functional programming for existing C# developers written by Tomas Petricek and Jon Skeet. This book explains the core principles using both C# and F#, shows how to use functional ideas when designing .NET applications and presents practical examples such as design of domain specific language, development of multi-core applications and programming of reactive applications.

    Read the article

  • Stir Trek: Iron Man Edition Recap and Photos

    - by Brian Jackett
    If you’ve noticed my blogging activity has reduced in frequency and technical content lately it’s primarily due to all of the conferences I’ve been attending, speaking at, or planning in the past few months.  This past Friday myself and six other dedicated individuals put on Stir Trek: Iron Man Edition as the culmination of a few months of hard work.  For those unfamiliar, Stir Trek is a web developer conference that was founded last year as an event to showcase content from Microsoft’s MIX conference and end the day with a private showing of the then just-released Star Trek movie.  This year’s conference expanded from 2 to 4 content tracks and upped the number of tickets from 350 to 600.  Even more amazing was the fact that we had 592 people show up day of the event for the lowest drop-off percentage of any conference I’ve been to before.   Nerd Dinner and Swag Bags     The night before Stir Trek: Iron Man Edition we hosted a nerd dinner at the Polaris Shopping mall food court with about 30 in attendance.  Nerd dinners are a great time to meet others passionate about technology and socialize before the whirlwind of the conference hits.  After the nerd dinner 20+ volunteers headed to the conference location and helped us stuff swag bags.  This in and of itself was a monumental task of putting together 600 swag bags with numerous leaflets, sponsor items, and t-shirts.  A big thanks goes out to all who assisted us that night so that we could finish in just under 2 hours instead of taking all night.  My sleep schedule also thanks you. Morning of Stir Trek     After getting a decent amount of sleep I arrived at Marcus Crosswoods theater at 6am to begin setting up for the day.  Myself and Jody Morgan were in charge of registration so we got tables set up, laid out swag bags, and organized our volunteer crew to assist with checking-in attendees.  Despite having 600+ people registration went fairly smoothly and got the day off to a great start.  I especially appreciated the 3+ cups of coffee from Crimson Cup, a local coffee shop.  For any of you that know me you’ll know that I rarely drink coffee except a few times a year when I really need the energy, so that says a lot about how good their coffee is.   Conference Starts     Once registration was completed the day kicked off with Molly Holzschlag keynoting.  Unfortunately Molly suffered from an ear infection and wasn’t able to fly so she had a virtual keynote and a session later in the day.  I was working behind the scenes on various tasks so I was only able to drop in very briefly on the keynote and rest of the morning sessions.  Throughout the day I tried to grab at least 1 or 2 pics of each presenter.  See my album below for the full set of pics.      For lunch we ordered around 150 pizzas from Mellow Mushroom, a local pizza place (notice the theme of supporting local businesses.)  Early on we were concerned about Mellow Mushroom being able to supply that many pizzas and get them delivered (still hot) to the theater, but they did an excellent job day of the event.  I wish I had gotten some pictures of the old school VW van they delivered the pizza in, but I was just a bit busy running around trying to get theaters ready for lunch.  We had attendees from last year who specifically requested that we have Mellow Mushroom supply lunch this year and I’m glad everything worked out being able to use them again.     During the afternoon I was able to attend a few sessions and hear some great content from various speakers.  It was also nice to just sit down and get off my feet for a bit.  After the last sessions the day concluded with a raffle.  There were a few logistical and technical issues that hampered our ability to smoothly conduct the raffle.  To those of you that agree the raffle wasn’t the smoothest experience I would like to say that the Stir Trek planning committee has already begun meeting to discuss ways of improving the conference for next year.  We are also accepting feedback (both positive and negative) at the following link: click here.  If you don’t wish to use the Joind In site you can also email me directly and I’ll be sure to pass along the feedback.   Iron Man 2 Movie     Last but not least, what Stir Trek event would be complete without the feature movie.  This year’s movie was Iron Man 2.  The theater had some really cool props and promotions (see pic below) for the movie.  I really enjoyed Iron Man 2, but I would recommend brushing up on the Iron Man comics and Marvel’s plans for future movies to understand some of the plot elements that come up.  Also make sure you stay through to the end of the movie credits to see a sneak peak of something special, that’s all I’ll say. Conclusion     Again a big thanks goes out to all of the speakers, sponsors, attendees, movie theater staff, volunteers, and everyone else involved in making this event great.  Also big thanks to my fellow Stir Trek planning committee members: Jeff Blankenburg, Matt Casto, Carey Payette, Jody Morgan, Rick Kierner, and Sarah Dutkiewitcz.  I am grateful for everything I learned while helping plan this event and look forward to being involved again next year.  For those interested we are currently targeting Thor as our movie theme for 2011 and then The Avengers for 2012.  These are tentative based on release dates that could shift as we get closer, but for now look solid.   Photos Pics on Facebook (includes tagging)     Stir Trek: Iron Man Edition photos on Facebook Pics on Live site (higher res)      View Full Album         -Frog Out

    Read the article

  • Happy 3rd Birthday SilverlightCream!

    - by Dave Campbell
    Happy 3rd Birthday!     Yesterday (May 16) was the 'Birthday' of SilverlightCream, which started just after MIX in 2007 with a post "Interesting Silverlight posts today: Silverlight Control & Silverlight Pad". Too many good posts flying around led me to want to archive them, particularly since I was being aggregated at a new site Silverlight.net, and I could give some of that 'reach' to the community. Saturday's post was number 862, and as of that post, there were 5697 blog posts archived in the database all tagged up and searchable at SilverlightCream.com using the search page. The search needs to be better, and that's another discussion, but it does work. The blog didn't begin life as the SilverlightCream blog, as is obvious from the name, but once I realized people were following it closely, I've tried to keep the signal-to-noise ratio very high. I even secured another blog for when I just want to rant about something to keep that stuff out of this one :) If you've been around since MIX07 days you've heard all this, but after talking to some people at MIX10 I realized not everyone knows all the ways the information is presented, so I figured doing a post like this once a year probably isn't a bad idea :) I scrounge through an ever-growing list of blogs (right now sitting at 505) looking for good stuff. I try to spin through the list every day, but with the list growing that large, it's getting tough. I usually use it as a background task while working or watching TV. If I just sit and go through the blogs it takes about an hour. The list is long enough now that from time to time, I'll only get partway through it and have 10 to 13 entries, so I'll just stop there and go on the next day... I don't like to have more than 15 in any single post. It's all pattern recognition as in "seen that", "seen that", "that's new", etc... so if you're a blogger, look at a heading below for some comments about blogging from my perspective. When I see something new, I make sure you're not pulling a 'Mike Taulty' on me and dumping 6 or 8 new posts in one day :), and I tag the ones I want to review. If there's not a lot going on, I may just push the posts as I come across them. Some days there may be 60 posts in that 'to review' list! Some are non-Silverlight, some are essentially duplicates of others, some are demos, ads, new releases of something, session materials, etc. I push lots of material into a database at WynApse.com, and the "Tagged Posts" menu on the left sidebar there takes you to a tag cloud of (at this very moment) "9224 articles tagged 13915 different ways using 459 unique tags". There are links in there on Gibson guitars, Jazz Guitar instructional stuff, Ford F-250 links, and tons of technical and non-technical stuff I've been aggregating for about 5 years now. So when I decide to blog (or shoutout) something, I first push it into the database at WynApse.com. Then I tag it all up and push it into the database at SilverlightCream.com. Then it gets pushed to @SilverlightNews. For a little over a year now, we're tracking unique IP hits on posts launched from either the blog post or from one of the SilverlightCream.com pages, and the posts with top hits from unique IP addresses in the last 7 days are displayed in a 'Skim' page at SilverlightCream... and that page needs work as well. The Skim page and tracking was the brainchild of my buddy Michael Washington. What I blog/shoutout After some time doing posts, I decided there were things that probably have no need to be searchable, but are good information, so I post those as 'Shoutouts'. Eventually I also decided the Shoutouts should get posted to @SilverlightNews, and that's now taking place. Notes to bloggers Remember I said spinning throught the Big List-o-BlogsTM is pattern recognition... that means I don't spend a lot of time on any individual blog deciding if it has new content. If you're familiar with the term 'Above the Fold', then you're probably ok. If I have to scroll the page to see if there's something new, or wade through some maze of menus, I'm probably going to miss new stuff. Likewise if you only show the latest on the front page and make it a puzzle to find the rest of them, or if you make the titles and initial graphics almost identical to the previous article, I'll miss it. Another thing is name/brand-recognition. Far be it for me (WynApse) to comment on someone blogging with a pseudonym, but if you want to get get some recognition, you are going to want your name to be available somewhere. I can think right off the top of my head of a couple good blogs that I have no idea of the individuals' real names. I can pull that off a bit because I've been around so long almost everyone knows who I am, but if you're new to the blog-o-sphere, being able to be name-recognized is as important as getting your brand out there. Kick my tires Finally, stuff happens... I may hit the wrong key and delete your blog, or a post might slip past me and I not realize it's new because of the naming, and never blog it. If you think I missed something, send me an email or use the submit page at SilverlightCream.com. Some bloggers have figured out that if they submit (one way or another) to me, their posts will go out next. I try to honor anyone that takes the time to submit with a quicker 'Cream posting. Thanks! Finally, thanks to everyone that contributes to the community as a whole... the blogs, the videos, and the presentations. A special thanks to everyone that reads SilverlightCream, or follows @WynApse or @SilverlightNews. Keep it all coming, and... Stay in the 'Light

    Read the article

  • Design a T-shirt for .NET Reflector Pro

    - by Laila
    Win a .NET Reflector Pro license, a box of Red Gate goodies, and a t-shirt printed with your design! Red Gate likes t-shirts. Each of our teams has one. In fact, each individual person has one, numbered according to when they joined the company: Red Gate's 1st, 2nd, and so on right up to Red Gate's 170th, with the slogan "More than just a number". Those t-shirts are important, chiefly because they remind the people wearing them that they are important. But that isn't enough. What really makes us great are the people who choose to use our tools. So we'd like to extend our tradition of t-shirts to include you and put the design of our next shirt entirely in your hands. We'd like you to come up with a witty slogan or create an inventive or simply beautiful t-shirt design for .NET Reflector Pro, our add-in for Visual Studio, which allows you to step into decompiled assemblies whilst debugging in Visual Studio. When you're done, post your masterpiece to Twitter with the hash tag #reflectortees, and @redgate will take a look! We'll pick the best design, and the winner will get a licensed copy of .NET Reflector Pro and a box of Red Gate goodies - not to mention a copy of their t-shirt. The winning design will go into production and be worn and given out at tradeshows, conferences, and user group events across the world, proudly bearing the name of their designer. We'll also pick three runners-up who will receive licenses for .NET Reflector Pro. Red Gate goodie box Interested? If you're up for the challenge, then we've got some resources to get you started. Inside the .zip file you'll find high-quality versions of the following: T-shirt templates: don't forget to design the front and the back! Different versions of the .NET Reflector Pro logo and Red Gate logo. Colour sheets to give you an easy reference to the Red Gate colours, including hex and RGB values. You can create and send us as many designs as you like, and each of them will be considered for the prize. To submit your designs, simply tweet including the competition hash tag, #reflectortees, and a link to somewhere we can see your design: either an image hosting site such as Twitpic, Flickr or Picasa, or a personal blog. You will need to create a Twitter account (which is free), if you don't already have one. You only have three limits: The background colour of the t-shirt should be one of our brand colours (red, light/dark grey or black), though you're welcome to use other colours in the rest of the design. You need to make use of either the .NET Reflector Pro logo OR the Red Gate logo (please keep them as they are) If you include any text or slogan, stick with just one or two colors for it. Apart from that, go wild. Go and do whatever it is you do when you get creative: whether you walk barefoot on the grass with a pencil and paper, sit cross-legged on a pile of cushions with a laptop, or simply close your eyes and float through a mist of ideas, now is your chance. Make sure you enjoy it. We're looking forward to seeing your creations. Terms and conditions 1. The closing date for entries is June 11th, 2010 (4 p.m. UK time). Red Gate Software Ltd reserves the right to extend the competition deadline at its discretion. If there is a revision, the revised date will be published on this blog and the date for announcing the results will be postponed accordingly. 2. The winning designer will be notified on June 14th, 2010 through Twitter. The winner must claim his/her prize by sending us a high-resolution image of their design via email (i.e. Illustrator EPS files or appropriate format, ideally at 300dpi). If the winner does not come forward within 3 days of the announcement, they will forfeit their prize and another winner will be selected from the runners-up. The names of the winner and runners-up will be posted on this blog by June 18th.  3. Entry is completed on the designer posting a link to their entry in a tweet with the correct hash tag, #reflectortees. 4. Red Gate Software needs to hold the rights to using the winning design in order to put the t-shirt into production. We will make sure that this is fine with the winner before we do so, but if you do not want us holding the rights to your design, please do not submit your designs. We reserve the right to slightly alter or adjust any artwork we decide to use (mainly to make it easier to print), but we will make sure we contact the winner for approval first. The winner will also need to allow us the use of his/her name for purposes of promoting your design. 5. Entries must be entirely your own original work and must not breach any copyright or third party rights. Red Gate Software Ltd will not be made partially or fully liable for any non-original work submitted by you. 6. This competition is free: you do not need to buy anything or be an existing customer to enter. 7. This competition is not open to employees of Red Gate Software Ltd, their families, or any other company directly connected with the administration of this promotion.

    Read the article

  • SQLAuthority News – #TechEdIn – TechEd India 2012 Memories and Photos

    - by pinaldave
    TechEd India 2012 was held in Bangalore last March 21 to 23, 2012. Just like every year, this event is bigger, grander and inspiring. Pinal Dave at TechEd India 2012 Family Event Every single year, TechEd is a special affair for my entire family.  Four months before the start of TechEd, I usually start to build the mental image of the event. I start to think  about various things. For the most part, what excites me most is presenting a session and meeting friends. Seriously, I start thinking about presenting my session 4 months earlier than the event!  I work on my presentation day and night. I want to make sure that what I present is accurate and that I have experienced it firsthand. My wife and my daughter also contribute to my efforts. For us, TechEd is a family event, and the two of them feel equally responsible as well. They give up their family time so I can bring out the best content for the Community. Pinal, Shaivi and Nupur at TechEd India 2012 Guinea Pigs (My Experiment Victims) I do not rehearse my session, ever. However, I test my demo almost every single day till the last moment that I have to present it already. I sometimes go over the demo more than 2-3 times a day even though the event is more than a month away. I have two “guinea pigs”: 1) Nupur Dave and 2) Vinod Kumar. When I am at home, I present my demos to my wife Nupur. At times I feel that people often backup their demo, but in my case, I have backup demo presenters. In the office during lunch time, I present the demos to Vinod. I am sure he can walk my demos easily with eyes closed. Pinal and Vinod at TechEd India 2012 My Sessions I’ve been determined to present my sessions in a real and practical manner. I prefer to present the subject that I myself would be eager to attend to and sit through if I were an audience. Just keeping that principle in mind, I have created two sessions this year. SQL Server Misconception and Resolution Pinal and Vinod at TechEd India 2012 We believe all kinds of stuff – that the earth is flat, or that the forbidden fruit is apple, or that the big bang theory explains the origin of the universe, and so many other things. Just like these, we have plenty of misconceptions in SQL Server as well. I have had this dream of co-presenting a session with Vinod Kumar for the past 3 years. I have been asking him every year if we could present a session together, but we never got it to work out, until this year came. Fortunately, we got a chance to stand on the same stage and present a single subject.  I believe that Vinod Kumar and I have an excellent synergy when we are working together. We know each other’s strengths and weakness. We know when the other person will speak and when he will keep quiet. The reason behind this synergy is that we have worked on 2 Video Learning Courses (SQL Server Indexes and SQL Server Questions and Answers) and authored 1 book (SQL Server Questions and Answers) together. Crowd Outside Session Hall This session was inspired from the “Laurel and Hardy” show so we performed a role-playing of those famous characters. We had an excellent time at the stage and, for sure, the audience had a wonderful time, too. We had an extremely large audience for this session and had a great time interacting with them. Speed Up! – Parallel Processes and Unparalleled Performance Pinal Dave at TechEd India 2012 I wanted to approach this session at level 400 and I was very determined to do so. The biggest challenge I had was that this was a total of 60 minutes of session and the audience profile was very generic. I had to present at level 100 as well at 400. I worked hard to tune up these demos. I wanted to make sure that my messages would land perfectly to the minds of the attendees, and when they walk out of the session, they could use the knowledge I shared on their servers. After the session, I felt an extreme satisfaction as I received lots of positive feedback at the event. At one point, so many people rushed towards me that I was a bit scared that the stage might break and someone would get injured. Fortunately, nothing like that happened and I was able to shake hands with everybody. Pinal Dave at TechEd India 2012 Crowd rushing to Pinal at TechEd India 2012 Networking This is one of the primary reasons many of us visit the annual TechEd event. I had a fantastic time meeting SQL Server enthusiasts. Well, it was a terrific time meeting old friends, user group members, MVPs and SQL Enthusiasts. I have taken many photographs with lots of people, but I have received a very few back. If you are reading this blog and have a photo of us at the event, would you please send it to me so I could keep it in my memory lane? SQL Track Speaker: Jacob and Pinal at TechEd India 2012 SQL Community: Pinal, Tejas, Nakul, Jacob, Balmukund, Manas, Sudeepta, Sahal at TechEd India 2012 Star Speakers: Amit and Balmukund at TechEd India 2012 TechED Rockstars: Nakul, Tejas and Pinal at TechEd India 2012 I guess TechEd is a mix of family affair and culture for me! Hamara TechEd (Our TechEd) Please tell me which photo you like the most! Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, SQLServer, T SQL, Technology Tagged: TechEd, TechEdIn

    Read the article

  • Reflections on GiveCamp

    - by Reed
    I participated in the Seattle GiveCamp over the weekend, and am entirely impressed.  GiveCamp is a great event – I especially like how rewarding it is for everybody involved.  I strongly encourage any and all developers to watch for future GiveCamp events, and consider participating, for many reasons… GiveCamp provides real value to organizations that truly need help.  The Seattle event alone succeeded in helping sixteen non-profit organizations in many different ways.  The projects involved varied dramatically, including website redesigns, SEO, reworking data management workflows, and even game development.  Many non-profits have a strong need for good, quality technical help.  However, nearly every non-profit organization has an incredibly limited budget.  GiveCamp is a way to really give back, and provide incredibly valuable help to organizations that truly benefit. My experience has shown many developers to be incredibly generous – this is a chance to dedicate your energy to helping others in a way that really takes advantage of your expertise.  Your time as a developer is incredibly valuable, and this puts something of incredible value directly into the hands of places its needed. First, and foremost, GiveCamp is about providing technical help to non-profit organizations in need. GiveCamp can make you a better developer.  This is a fantastic opportunity for us, as developers, to work with new people, in a new setting.  The incredibly short time frame (one weekend for a deliverable project) and intense motivation to succeed provides a huge opportunity for learning from peers.  I’d personally like to thank off the developers with whom I worked – I learned something from each and every one of you.  I hope to see and work with all of you again someday. GiveCamp provides an opportunity for you to work outside of your comfort zone. While it’s always nice to be an expert, it’s also valuable to work on a project where you have little or no direct experience.  My team focused on a complete reworking of our organizations message and a complete new website redesign and deployment using WordPress.  While I’d used WordPress for my blog, and had some experience, this is completely unrelated to my professional work.  In fact, nobody on our team normally worked directly with the technologies involved – yet together we managed to succeed in delivering our goals.  As developers, it’s easy to want to stay abreast of new technology surrounding our expertise, but its rare that we get a chance to sit down and work on something practical that is completely outside of our normal realm of work.  I’m a desktop developer by trade, and spent much of the weekend working with CSS and Photoshop.  Many of the projects organizations need don’t match perfectly with the skill set in the room – yet all of the software professionals rose to the occasion and delivered practical, usable applications. GiveCamp is a short term, known commitment. While this seems obvious, I think it’s an important aspect to remember.  This is a huge part of what makes it successful – you can work, completely focused, on a project, then walk away completely when you’re done.  There is no expectation of continued involvement.  While many of the professionals I’ve talked to are willing to contribute some amount of their time beyond the camp, this is not expected. The freedom this provides is immense.  In addition, the motivation this brings is incredibly valuable.  Every developer in the room was very focused on delivering in time – you have one shot to get it as good as possible, and leave it with the organization in a way that can be maintained by them.  This is a rare experience – and excellent practice at time management for everyone involved. GiveCamp provides a great way to meet and network with your peers. Not only do you get to network with other software professionals in your area – you get to network with amazing people.  Every single person in the room is there to try to help people.  The balance of altruism, intelligence, and expertise in the room is something I’ve never before experienced. During the presentations of what was accomplished, I felt blessed to participate.  I know many people in the room were incredibly touched by the level of dedication and accomplishment over the weekend. GiveCamp is fun. At the end of the experience, I would have signed up again, even if it was a painful, tedious weekend – merely due to the amazing accomplishments achieved throughout the event.  However, the event is fun.  Everybody I talked to, the entire weekend, was having a good time.  While there were many faces focused into a near grimace at times (including mine, I’ll admit), this was always in response to a particularly challenging problem or task.  The challenges just added to the overall enjoyment of the weekend – part of why I became a developer in the first place is my love for challenge and puzzles, and a short deadline using unfamiliar technology provided plenty of opportunity for puzzles.  As soon as people would stand up, it was another smile.   If you’re a developer, I’d recommend looking at GiveCamp more closely.  Watch for an event in your area.  If there isn’t one, consider building a team and organizing an event.  The experience is worth the commitment. 

    Read the article

< Previous Page | 31 32 33 34 35 36 37 38 39 40 41  | Next Page >