Search Results

Search found 3184 results on 128 pages for 'trace'.

Page 35/128 | < Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >

• NHibernate.MappingException - Troubles Shooting Checklist (no persister for)

  - by Berryl

  Here's a starter list: 1) if hbm is hand generated, is it an embedded resource? 2) if using FNH, does it pass a PerssistenceSpecification test? 3) if not using FNH, can you save and then load the persisted class? 4) more? I'm sure many of you have gotten this one at one point or another. But have you ever gotten it when you knew your mapping was set up correctly? I started getting this exception after I started using a new repository design, but only in one scenario! PersistenceSpecification tests pass, as do all repository methods (using SQLite). The scenario that leads to the exception is when legacy projects from a different db are converted to green field system. The legacy system is from a different database and has it's own session factory, which should be irrelevant because the error comes after previously unconverted Projects are retrieved and in memory. As the routine tries to save these unconverted Projects into the new database, the exception is thrown, full stack trace below. Any ideas on how to build up the trouble shooting check list and solves this problem? Cheers, Berryl === the Exception trace ===== failed: NHibernate.MappingException : No persister for: Smack.ConstructionAdmin.Domain.Model.Projects.Project at NHibernate.Impl.SessionFactoryImpl.GetEntityPersister(String entityName) at NHibernate.Impl.SessionImpl.GetEntityPersister(String entityName, Object obj) at NHibernate.Engine.ForeignKeys.IsTransient(String entityName, Object entity, Nullable`1 assumed, ISessionImplementor session) at NHibernate.Event.Default.AbstractSaveEventListener.GetEntityState(Object entity, String entityName, EntityEntry entry, ISessionImplementor source) at NHibernate.Event.Default.DefaultSaveOrUpdateEventListener.PerformSaveOrUpdate(SaveOrUpdateEvent event) at NHibernate.Event.Default.DefaultSaveOrUpdateEventListener.OnSaveOrUpdate(SaveOrUpdateEvent event) at NHibernate.Impl.SessionImpl.FireSaveOrUpdate(SaveOrUpdateEvent event) at NHibernate.Impl.SessionImpl.SaveOrUpdate(Object obj) NHibernate\Repository\FabioNHibRepository.cs(46,0): at Smack.Core.Data.NHibernate.Repository.FabioNHibRepository`1.Add(T item) LegacyConversion\LegacyBatchUpdater.cs(20,0): at Smack.ConstructionAdmin.Data.LegacyConversion.LegacyBatchUpdater.ConvertOpenLegacyProjects(ILegacyProjectDao legacyProjectDao, IProjectRepository greenProjectRepository) Data\Brownfield\ProjectBatchUpdate_SQLiteTests.cs(19,0): at Smack.ConstructionAdmin.Tests.Data.Brownfield.ProjectBatchUpdate_SQLiteTests.Test()

  Read the article

• Flash as3 smooth threshold

  - by arkzai

  hello, I'm building a flash app that pulls images from flickr and removes the white background I'm dong this using threshold and i get a really ragged outcome is there any way to get a better and smoother color key? thanks photoNumber = Math.floor(Math.random() * (photos.length)); loader.load(new URLRequest(photos[photoNumber].path)); loader.contentLoaderInfo.addEventListener(Event.COMPLETE,draw); trace ( "trying to load photo " + photoNumber ); function draw(e:Event) { trace ("show photo " + photoNumber) var W:int=e.target.content.width; var H:int=e.target.content.height; bitmapdata=new BitmapData(W,H); bitmap=new Bitmap(bitmapdata); bitmapdata.draw(e.target.content); var threshold:uint = 0xF9F8F800; var color:uint = 0x00000000; var maskColor:uint = 0x00FF0000; bitmapdata.threshold(bitmapdata,new Rectangle(0,0,W,H),new Point(0,0),">", threshold, color, maskColor, true); bitmap.smoothing = true; //bitmap.scaleX = bitmap.scaleY = 0.99; // <---- imgHolder.addChild(bitmap); } }

  Read the article

• ActionScript Drag and Drop Display Objects With Mask And Filter?

  - by TheDarkIn1978

  i've created a sprite to drag and drop around the stage. the sprite is masked and has it's mask as it's child so that it too will drag along with the sprite. everything works fine until i add a drop shadow filter to the sprite. when the drop shadow is added, i can only mousedown to drag and mouseup to drop the sprite if the mouse events occur within the original location of the sprite when it was added to the stage. how can i fix this problem? could this be an issue with 10.1? if not what am i doing wrong? var thumbMask:Sprite = new Sprite(); thumbMask.graphics.beginFill(0, 1); thumbMask.graphics.drawRoundRect(0, 0, 100, 75, 25, 25); thumbMask.graphics.endFill(); var thumb:Sprite = new Sprite(); thumb.graphics.beginFill(0x0000FF, 1); thumb.graphics.drawRect(0, 0, 100, 75); thumb.graphics.endFill(); thumb.addEventListener(MouseEvent.MOUSE_DOWN, drag); thumb.addEventListener(MouseEvent.MOUSE_UP, drop); thumb.filters = [new DropShadowFilter(0, 0, 0, 1, 20, 20, 1.0, 3)]; thumb.addChild(thumbMask); thumb.mask = thumbMask; addChild(thumb) function drag(evt:MouseEvent):void { evt.target.startDrag(); trace("drag"); } function drop(evt:MouseEvent):void { evt.target.stopDrag(); trace("drop"); }

  Read the article

• SQL Express under IIS 7.5

  - by fampinheiro

  I´m developing a web service that access a SQL Express database, it works very well in the Visual Studio host but when i deploy it to IIS 7.5 i get this exception. Please help me. Stack Trace: System.Data.EntityException: The underlying provider failed on Open. ---> System.Data.SqlClient.SqlException: Failed to generate a user instance of SQL Server due to failure in retrieving the user's local application data path. Please make sure the user has a local user profile on the computer. The connection will be closed. at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) --- End of inner exception stack trace --- at System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) at System.Data.EntityClient.EntityConnection.Open() at System.Data.Objects.ObjectContext.EnsureConnection() at System.Data.Objects.ObjectQuery`1.GetResults(Nullable`1 forMergeOption) at System.Data.Objects.ObjectQuery`1.System.Collections.Generic.IEnumerable<T>.GetEnumerator() at System.Linq.Enumerable.FirstOrDefault[TSource](IEnumerable`1 source) at WSCinema.CinemaService.Movie() in D:\Documents\My Dropbox\Projects\sd.v0910\trab3\code\WSCinema\CinemaService.asmx.cs:line 46

  Read the article

• Deploying Application with mvc in shared hosting server

  - by ankita-13-3

  We have created an MVC web application in asp.net 3.5, it runs absolutely fine locally but when we deploy it on godaddy hosting server (shared hosting), it shows an error which is related to trust level problem. We contacted godaddy support and they say, that we only support medium trust level application. So how to convert my application in medium trust level. Do I need to make changes to web.config file. It shows the following error : Security Exception Description: The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact your system administrator or change the application's trust level in the configuration file. Exception Details: System.Security.SecurityException: Request failed. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [SecurityException: Request failed.] System.Security.CodeAccessSecurityEngine.ThrowSecurityException(Assembly asm, PermissionSet granted, PermissionSet refused, RuntimeMethodHandle rmh, SecurityAction action, Object demand, IPermission permThatFailed) +150 System.Security.CodeAccessSecurityEngine.ThrowSecurityException(Object assemblyOrString, PermissionSet granted, PermissionSet refused, RuntimeMethodHandle rmh, SecurityAction action, Object demand, IPermission permThatFailed) +100 System.Security.CodeAccessSecurityEngine.CheckSetHelper(PermissionSet grants, PermissionSet refused, PermissionSet demands, RuntimeMethodHandle rmh, Object assemblyOrString, SecurityAction action, Boolean throwException) +284 System.Security.PermissionSetTriple.CheckSetDemand(PermissionSet demandSet, PermissionSet& alteredDemandset, RuntimeMethodHandle rmh) +69 System.Security.PermissionListSet.CheckSetDemand(PermissionSet pset, RuntimeMethodHandle rmh) +150 System.Security.PermissionListSet.DemandFlagsOrGrantSet(Int32 flags, PermissionSet grantSet) +30 System.Threading.CompressedStack.DemandFlagsOrGrantSet(Int32 flags, PermissionSet grantSet) +40 System.Security.CodeAccessSecurityEngine.ReflectionTargetDemandHelper(Int32 permission, PermissionSet targetGrant, CompressedStack securityContext) +123 System.Security.CodeAccessSecurityEngine.ReflectionTargetDemandHelper(Int32 permission, PermissionSet targetGrant, Resolver accessContext) +41 Look forward to your help. Regards Ankita Software Developer Shakti Informatics Pvt. Ltd. Web Template Hub

  Read the article

• WCF, IIS6.0 (413) Request Entity Too Large.

  - by Andrew Kalashnikov

  Hello, guys. I've got annoyed problem. I've got WCF service(basicHttpBinding with Transport security Https). This service implements contract which consists 2 methods. LoadData. GetData. GetData works OK!. My client received pachage ~2Mb size without problems. All work correctly. But when I try load data by bool LoadData(Stream data); - signature of method I'll get (413) Request Entity Too Large. Stack Trace: Server stack trace: ? ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(HttpWebRequest request, HttpWebResponse response, HttpChannelFactory factory, WebException responseException, ChannelBinding channelBinding) System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout) System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout) System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout) I try this http://blogs.msdn.com/jiruss/archive/2007/04/13/http-413-request-entity-too-large-can-t-upload-large-files-using-iis6.aspx. But it doesn't work! My server is 2003 with IIS6.0. Please help.

  Read the article

• What programming hack from your past are you most ashamed of?

  - by LeopardSkinPillBoxHat

  We've all been there (usually when we are young and inexperienced). Fixing it properly is too difficult, too risky or too time-consuming. So you go down the hack path. Which hack from your past are you most ashamed of, and why? I'm talking about the ones where you would be really embarrassed if someone could attribute the hack to you (quite easily if you are using revision control software). One hack per answer please. Mine was shortly after I started in my first job. I was working on a legacy C system, and there was this strange defect where a screen view failed to update properly under certain circumstances. I wasn't familiar with how to use the debugger at this time, so I added traces into the code to figure out what was going on. Then I realised that the defect didn't occur anymore with the traces in the code. I slowly backed out the traces one-by-one, until I realised that only a single trace was required to make the problem go away. My logic now would tell me that I was dealing with some sort of race-condition or timing related issue that the trace just "hid under the rug". But I checked in the code with the following line, and all was well: printf(""); Which hacks are you ashamed of?

  Read the article

• Datatable add new column and values speed issue

  - by Cine

  I am having some speed issue with my datatables. In this particular case I am using it as holder of data, it is never used in GUI or any other scenario that actually uses any of the fancy features. In my speed trace, this particular constructor was showing up as a heavy user of time when my database is ~40k rows. The main user was set_Item of DataTable. protected myclass(DataTable dataTable, DataColumn idColumn) { this.dataTable = dataTable; IdColumn = idColumn ?? this.dataTable.Columns.Add(string.Format("SYS_{0}_SYS", Guid.NewGuid()), Type.GetType("System.Int32")); JobIdColumn = this.dataTable.Columns.Add(string.Format("SYS_{0}_SYS", Guid.NewGuid()), Type.GetType("System.Int32")); IsNewColumn = this.dataTable.Columns.Add(string.Format("SYS_{0}_SYS", Guid.NewGuid()), Type.GetType("System.Int32")); int id = 1; foreach (DataRow r in this.dataTable.Rows) { r[JobIdColumn] = id++; r[IsNewColumn] = (r[IdColumn] == null || r[IdColumn].ToString() == string.Empty) ? 1 : 0; } Digging deeper into the trace, it turns out that set_Item calls EndEdit, which brings my thoughts to the transaction support of the DataTable, for which I have no usage for in my scenario. So my solution to this was to open editing on all of the rows and never close them again. _dt.BeginLoadData(); foreach (DataRow row in _dt.Rows) row.BeginEdit(); Is there a better solution? This feels too much like a big giant hack that will eventually come and bite me. You might suggest that I dont use DataTable at all, but I have already considered that and rejected it due to the amount of effort that would be required to reimplement with a custom class. The main reason it is a datatable is that it is ancient code (.net 1.1 time) and I dont want to spend that much time changing it, and it is also because the original table comes out of a third party component.

  Read the article

• receive values with XML, AS3

  - by VideoDnd

  My example imports XML and has an object rotating on stage. The rotating object is called enemy corresponds to ENEMY in the XML. How do I set the rotation variable to receive values from XML? REASON It seems more difficult to set up variables using external data. I want to understand it better. rotation.fla //LOAD XML var myXML:XML; var myLoader:URLLoader = new URLLoader(); myLoader.load(new URLRequest("enemy.xml")); myLoader.addEventListener(Event.COMPLETE, processXML); //PARSE XML function processXML(e:Event):void { myXML = new XML(e.target.data); trace(myXML.ROGUE.*); trace(myXML); //TEXT var text:TextField = new TextField(); text.text = myXML.ENEMY.*; addChild(text); } //ROTATION function enterFrameHandler(event:Event):void { //==>CODE I WANT TO CHANGE<== enemy.rotationY += 10; } addEventListener(Event.ENTER_FRAME, enterFrameHandler); enemy.xml ENEMY is set to -100, use what you like <?xml version="1.0" encoding="utf-8"?> <BADGUYS> <ENEMY TITLE="sticky">-100</ENEMY> <ROGUE TITLE="slimy">-1000</ROGUE> </BADGUYS>

  Read the article

• Memory leak dyld dlopen

  - by imthi

  I am getting leak and I cannot detect from where this is happening. The stack trace does not give full info after dyld open. For few leaks I am not getting any stack trace info. All I get is only object memory address. Is anyone else facing the same issue. I am using XCode 3.2 on show leopard. 18 0x103038 17 0x1033c7 16 0x1034a1 15 0x90145f48 14 dyld dlopen 13 dyld dyld::link(ImageLoader*, bool, ImageLoader::RPathChain const&) 12 dyld ImageLoader::link(ImageLoader::LinkContext const&, bool, bool, ImageLoader::RPathChain const&) 11 dyld ImageLoader::recursiveLoadLibraries(ImageLoader::LinkContext const&, bool, ImageLoader::RPathChain const&) 10 dyld dyld::libraryLocator(char const*, bool, char const*, ImageLoader::RPathChain const*) 9 dyld dyld::load(char const*, dyld::LoadContext const&) 8 dyld dyld::loadPhase0(char const*, dyld::LoadContext const&, std::vector<char const*, std::allocator<char const*> >*) 7 dyld dyld::loadPhase1(char const*, dyld::LoadContext const&, std::vector<char const*, std::allocator<char const*> >*) 6 dyld dyld::loadPhase3(char const*, dyld::LoadContext const&, std::vector<char const*, std::allocator<char const*> >*) 5 dyld dyld::loadPhase4(char const*, dyld::LoadContext const&, std::vector<char const*, std::allocator<char const*> >*) 4 dyld dyld::loadPhase5(char const*, dyld::LoadContext const&, std::vector<char const*, std::allocator<char const*> >*) 3 dyld dyld::mkstringf(char const*, ...) 2 dyld strdup 1 dyld mallocenter

  Read the article

• AS3 - Can't access properties or methods of a MC child that has been added in script

  - by Chris

  Hi All - I am still a bit of a beginner at AS3, so bear with me, please. I have created a loop to instantiate tiles on a board. In the following example, "Gametiles" is an array containing objects of class "Tile" which is a class that extends MovieClip. "Game" is a MC that I added to the stage in the flash developing environment. for(var i:uint=0;i < Gametiles.length;i++){ var pulledTile = Gametiles[i]; var tilename:String = "I_Tile_" + pulledTile.grid_y + "_" + pulledTile.grid_x; var createdTile = new InteractiveTile(); pulledTile.addAnims(createdTile); Game.addChildAt(pulledTile, 0); Game.getChildAt(0).name = tilename; } The above code works - but with a tricky problem. If I did something like the following: trace(Game.I_Tile_1_3.x); I get "TypeError: Error #1010: A term is undefined and has no properties." However, I am able to access theses children in the following manner: var testing = Game.getChildByName("I_Tile_1_3") trace(testing.x); This method is a bit cumbersome though. I really don't want to have to create a var and call getChildByName every time I want to interact with these properties or methods. How can I set up these children so that I can access them directly without the extra steps?

  Read the article

• XSP2 crashes serving static images

  - by Dawkins

  Hi, Requesting a simple HTML page with a jpg image makes XSP2 crash. If I remove the image from the HTML then the page is served OK all the time. The version is XSP2 2.0 mono 2.6.1. the version 2.4.2.2 in the same machine works fine. I have tested it in two different machines, both Windows Vista Business SP1. Anyone has experienced the same? Any clue of what can be the problem? Below is the stack trace displayed by the console: (The line in Spanish says "it has been forced the interruption of an existing connection by the remote host") EDIT: since another user is having the same problem I have submited a bug to Novell and created a litle zip to reproduce the problem: https://bugzilla.novell.com/show_bug.cgi?id=582162 Peer unexpectedly closed the connection on write. Closing our end. System.IO.IOException: Write failure ---> System.Net.Sockets.SocketException: Se ha forzado la interrupción de una conexión existente por el host remoto. at System.Net.Sockets.Socket.Send (System.Byte[] buf, Int32 offset, Int32 size , SocketFlags flags) [0x00000] in <filename unknown>:0 at System.Net.Sockets.NetworkStream.Write (System.Byte[] buffer, Int32 offset, Int32 size) [0x00000] in <filename unknown>:0 --- End of inner exception stack trace --- at System.Net.Sockets.NetworkStream.Write (System.Byte[] buffer, Int32 offset, Int32 size) [0x00000] in <filename unknown>:0 at Mono.WebServer.XSPWorker.Write (System.Byte[] buffer, Int32 position, Int32 size) [0x00000] in <filename unknown>:0 Peer unexpectedly closed the connection on write. Closing our end. System.ObjectDisposedException: The object was used after being disposed. at System.Net.Sockets.NetworkStream.CheckDisposed () [0x00000] in <filename un known>:0 at System.Net.Sockets.NetworkStream.Write (System.Byte[] buffer, Int32 offset, Int32 size) [0x00000] in <filename unknown>:0 at Mono.WebServer.XSPWorker.Write (System.Byte[] buffer, Int32 position, Int32 size) [0x00000] in <filename unknown>:0 Thank you.

  Read the article

• How do I find a source code position from an address given by a crash in Window CE

  - by Shane MacLaughlin

  I have a Windows mobile 4.0 application, written using EVC++ 4.0 SP4 with MFC, that is exhibiting a random occasional crash in the field. e.g. Exception ox800000002 at 00112584. It does not happen under various emulators and simulators, hence is very difficult to trace using a debugger. The crash throws up and address and exception type. Given that I have the PDB is there any way to track this address to the source. I can't recompile using VC++ 8 as it doesn't support the mobile 4 SDK. My guess is that without a stack trace I'm not going to have much joy, as the chances are that the exception may not be in my source. Worth a try all the same. Edit As suggested, I have looked at the address in the context of the .MAP file for the program. This reveals the following Address Publics by Value Rva+Base Lib:Object 0001:00000000 ?GetUnduValue@@YANMM@Z 00011000 f 7Par.obj ' ' ' 0001:001124b8 ?OnLButtonUp@CGXGridUserDragSelectRangeImp@@UAAHPAVCGXGridCore@@AAVCPoint@@AAI@Z 001234b8 f gxseldrg.obj 0001:001126d8 ?OnSelDragStart@CGXGridUserDragSelectRangeImp@@UAAHPAVCGXGridCore@@KK@Z 001236d8 f gxseldrg.obj Which suggests the error occured during CGXGridUserDragSelectRangeImp::OnLButtonUp(), which seems a bit odd as I don't think there was a mouse / keyboard / screen button pressed at the time. Could be the stack got fragged before the crash got reported, and I'm wasting my time. I'll recompile with assembler output to try to isolate it to a given line, but don't hold out much hope :( Does the fact that the map file reports segmented addresses e.g. 0001:xxxxxxxxx and the crash report unsegmented addresses mean I have to carry out some computation to get the map address from the crash address?

  Read the article

• .Net Finalizer Order / Semantics in Esent and Ravendb

  - by mattcodes

  Help me understand. I've read that "The time and order of execution of finalizers cannot be predicted or pre-determined" Correct? However looking at RavenDB source code TransactionStorage.cs I see this ~TransactionalStorage() { try { Trace.WriteLine( "Disposing esent resources from finalizer! You should call TransactionalStorage.Dispose() instead!"); Api.JetTerm2(instance, TermGrbit.Abrupt); } catch (Exception exception) { try { Trace.WriteLine("Failed to dispose esent instance from finalizer because: " + exception); } catch { } } } The API class (which belongs to Managed Esent) which presumable takes handles on native resources presumably using a SafeHandle? So if I understand correctly the native handles SafeHandle can be finalized before TransactionStorage which could have undesired effects, perhaps why Ayende has added an catch all clause around this? Actually diving into Esent code, it does not use SafeHandles. According to CLR via C# this is dangerous? internal static class SomeType { [DllImport("Kernel32", CharSet=CharSet.Unicode, EntryPoint="CreateEvent")] // This prototype is not robust private static extern IntPtr CreateEventBad( IntPtr pSecurityAttributes, Boolean manualReset, Boolean initialState, String name); // This prototype is robust [DllImport("Kernel32", CharSet=CharSet.Unicode, EntryPoint="CreateEvent")] private static extern SafeWaitHandle CreateEventGood( IntPtr pSecurityAttributes, Boolean manualReset, Boolean initialState, String name) public static void SomeMethod() { IntPtr handle = CreateEventBad(IntPtr.Zero, false, false, null); SafeWaitHandle swh = CreateEventGood(IntPtr.Zero, false, false, null); } } Managed Esent (NativeMEthods.cs) looks like this (using Ints vs IntPtrs?): [DllImport(EsentDll, CharSet = EsentCharSet, ExactSpelling = true)] public static extern int JetCreateDatabase(IntPtr sesid, string szFilename, string szConnect, out uint dbid, uint grbit); Is Managed Esent handling finalization/dispoal the correct way, and second is RavenDB handling finalizer the corret way or compensating for Managed Esent?

  Read the article

• Problem installing mysql gem on Snow Leopard: uninitialized constant MysqlCompat::MysqlRes

  - by emson

  Hi All I've got a problem trying to install the Ruby mysql gem driver. I recently upgraded to Snow Leopard and did the Hivelogic manual install of MySQL. This all seems to work fine as I can access mysql from the command line and make changes to the database. My problem is that if I now use rake db:migrate I get: rake aborted! uninitialized constant MysqlCompat::MysqlRes (See full trace by running task with --trace) Now it appears that my mysql gem isn't working correctly as I can access MySQL fine from Python using the Python driver (which I compiled to). I therefore tried to rebuild the gem using the following command from this site: http://techliberty.blogspot.com/, (incidentally I am using a recent Intel MacBook Pro): sudo env ARCHFLAGS="-arch x86_64" gem install mysql -- --with-mysql-config=/usr/local/mysql/bin/mysql_config This compiles although I get No definition for the documentation: Building native extensions. This could take a while... Successfully installed mysql-2.8.1 1 gem installed Installing ri documentation for mysql-2.8.1... No definition for next_result No definition for field_name ... I'm a little stumped as my mysql_config is located in the correct place: /usr/local/mysql/bin/mysql_config And I have removed all other instances of the mysql gem, from my system. Any suggestions would be greatly appreciated. Many thanks. PS I saw this previous post http://stackoverflow.com/questions/1332207/uninitialized-constant-mysqlcompatmysqlres-using-mms2r-gem but it doesn't seem applicable for my version.

  Read the article

• NSDate out of scope

  - by therealtkd

  Having problems with out of scope for NSDate in an iphone app. I have an interface defined like this: @interface MyObject : NSoObject { NSMutableArray *array; BOOL checkThis; NSDate *nextDue; } Now in the implementation I have this: -(id) init { if( (self=[super init]) ) { checkThis = NO; array = [[NSMutableArray alloc] init]; nextDue = [[NSDate date] retain]; NSDate *testDate = [NSDate date]; } return self; } Now, if I trace through the init, before I actually assign the variables checkThis shows as boolean. array shows as pointer 0x0 because it hasn't ben assigned. But the nextDue is showing as 'out of scope'. I don't understand why this is out of scope but the other variables aren't. If I trace through the code until after the variables are assigned, array now shows as being correctly assigned but nextDue is still out of scope. Interestingly, the testDate variable is assigned just fine and the debugger shows this as a valid date. Further interesting point is if I move the mouse over the testDate variable while I am debugging, it shows as an 'NSDate *' type which I would expect since that's its definition. Yet the nextDue, which to me is defined the same way is showing as a '_NSCFDate *'. Any googling I did on the subject said that the retain is the problem, but its actually out of scope before I even try to assign the variable. However, in another class, the same definition for NSDate work ok. It shows as nil before a value is assigned to it. Arghhh

  Read the article

• Passing youtube video id from video feed to flash

  - by Grant Anderson

  I'm working on a flash web application (Actionscript 2.0) for my honours project but am having trouble embedding youtube videos. Basically the user selects symbols which queries the youtube api with certain tags depending on the symbols chosenand a random video is then picked from the first 30 videos. I have this working using the following code: on (release) { url="http://gdata.youtube.com/feeds/api/videos?q=danger+passion&orderby=published&start-index="+random(30)+"&max-results=1&v=2" getURL(url); } but this just displays a webpage with a link to the youtube video. This is the code I'll be using as the foundations for the player: // create a MovieClip to load the player into var ytplayer:MovieClip = _root.createEmptyMovieClip("ytplayer", 1); // create a listener object for the MovieClipLoader to use var ytPlayerLoaderListener:Object = { onLoadInit: function() { // When the player clip first loads, we start an interval to // check for when the player is ready loadInterval = setInterval(checkPlayerLoaded, 250); } }; var loadInterval:Number; function checkPlayerLoaded():Void { // once the player is ready, we can subscribe to events, or in the case of // the chromeless player, we could load videos if (ytplayer.isPlayerLoaded()) { ytplayer.addEventListener("onStateChange", onPlayerStateChange); ytplayer.addEventListener("onError", onPlayerError); clearInterval(loadInterval); } } function onPlayerStateChange(newState:Number) { trace("New player state: "+ newState); } function onPlayerError(errorCode:Number) { trace("An error occurred: "+ errorCode); } // create a MovieClipLoader to handle the loading of the player var ytPlayerLoader:MovieClipLoader = new MovieClipLoader(); ytPlayerLoader.addListener(ytPlayerLoaderListener); // load the player ytPlayerLoader.loadClip("http://www.youtube.com/v/pv5zWaTEVkI", ytplayer); can anyone help me on how to get the id of the video (for example: pv5zWaTEVkI) from the feed? Or how to send a query from flash which will return the video url/id as opposed to the url of a feed. Any help would be much appreciated as my hand in rather soon. Thanks

  Read the article

• Issue on maven 2.2.1

  - by Dawit

  I wrote a small maven plugin and everything seems to work well with prior version of maven (2.0.9) but my build fails on version 2.2.1 The stack trace does not show anything from my end of the code and was wondering if anyone has encountered this issue. .... .... [ERROR] FATAL ERROR [INFO] ------------------------------------------------------------------------ [INFO] null [INFO] ------------------------------------------------------------------------ [INFO] Trace java.lang.NullPointerException at java.util.Hashtable.put(Hashtable.java:396) at java.util.Properties.setProperty(Properties.java:128) at org.apache.maven.project.ModelUtils.cloneProperties(ModelUtils.java:1264) at org.apache.maven.project.ModelUtils.cloneModelBaseFields(ModelUtils.java:318) at org.apache.maven.project.ModelUtils.cloneModel(ModelUtils.java:953) at org.apache.maven.project.DefaultMavenProjectBuilder.calculateConcreteStateInternal(DefaultMavenProjectBuilder.java:1855) at org.apache.maven.project.DefaultMavenProjectBuilder.calculateConcreteState(DefaultMavenProjectBuilder.java:1814) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.calculateConcreteState(DefaultLifecycleExecutor.java:779) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(DefaultLifecycleExecutor.java:575) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalWithLifecycle(DefaultLifecycleExecutor.java:540) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoal(DefaultLifecycleExecutor.java:519) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalAndHandleFailures(DefaultLifecycleExecutor.java:371) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeTaskSegments(DefaultLifecycleExecutor.java:332) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.execute(DefaultLifecycleExecutor.java:181) at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:356) at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:137) at org.apache.maven.cli.MavenCli.main(MavenCli.java:362) at org.apache.maven.cli.compat.CompatibleMain.main(CompatibleMain.java:41) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:592) at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315) at org.codehaus.classworlds.Launcher.launch(Launcher.java:255) at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430) at org.codehaus.classworlds.Launcher.main(Launcher.java:375) [INFO] ------------------------------------------------------------------------ [INFO] Total time: 17 seconds [INFO] Finished at: Thu May 27 16:18:40 CDT 2010 [INFO] Final Memory: 35M/63M

  Read the article

• Question about effective logging in C#

  - by MartyIX

  I've written a simple class for debugging and I call the method Debugger.WriteLine(...) in my code like this: Debugger.WriteLine("[Draw]", "InProgress", "[x,y] = " + x.ToString("0.00") + ", " + y.ToString("0.00") + "; pos = " + lastPosX.ToString() + "x" + lastPosY.ToString() + " -> " + posX.ToString() + "x" + posY.ToString() + "; SS = " + squareSize.ToString() + "; MST = " + startTime.ToString("0.000") + "; Time = " + time.ToString() + phase.ToString(".0000") + "; progress = " + progress.ToString("0.000") + "; step = " + step.ToString() + "; TimeMovementEnd = " + UI.MovementEndTime.ToString()); The body of the procedure Debugger.WriteLine is compiled only in Debug mode (directives #if, #endif). What makes me worry is that I often need ToString() in Debugger.WriteLine call which is costly because it creates still new strings (for changing number for example). How to solve this problem? A few points/questions about debugging/tracing: I don't want to wrap every Debugger.WriteLine in an IF statement or to use preprocessor directives in order to leave out debugging methods because it would inevitable lead to a not very readable code and it requires too much typing. I don't want to use any framework for tracing/debugging. I want to try to program it myself. Are Trace methods (http://msdn.microsoft.com/en-us/library/system.diagnostics.trace.aspx) left out if compiling in release mode? If it is so is it possible that my methods would behave similarly? http://msdn.microsoft.com/en-us/library/fht0f5be.aspx output = String.Format("You are now {0} years old.", years); Which seems nice. Is it a solution for my problem with ToString()?

  Read the article

• Flex AS3: ComboBox set visible to false doesn't hide

  - by jolierouge

  I have a combobox in a view that receives information about application state changes, and then is supposed to show or hide it's children based on the whole application state. It receives state change messages, it traces the correct values, it does what it's supposed to do, however, it just doesn't seem to work. Essentially, all it needs to do is hide a combobox during one state, and show it again during another state. Here is the code: public function updateState(event:* = null):void { trace("Project Panel Updating State"); switch(ApplicationData.getSelf().currentState) { case 'login': this.visible = false; break; case 'grid': this.visible = true; listProjects.includeInLayout = false; listProjects.visible = false; trace("ListProjects: " + listProjects.visible); listLang.visible = true; break; default: break; } } Here is the MXML: <mx:HBox> <mx:Button id="btnLoad" x="422" y="84" label="Load" enabled="true" click="loadProject();"/> <mx:ComboBox id="listProjects" x="652" y="85" editable="true" change="listChange()" color="#050CA8" fontFamily="Arial" /> <mx:Label x="480" y="86" text="Language:" id="label3" fontFamily="Arial" /> <mx:ComboBox id="listLang" x="537" y="84" editable="true" dataProvider="{langList}" color="#050CA8" fontFamily="Arial" width="107" change="listLangChange(event)"/> <mx:CheckBox x="830" y="84" label="Languages in English" id="langCheckbox" click='toggleLang()'/> </mx:HBox>

  Read the article

• Django: Overriding the save() method: how do I call the delete() method of a child class

  - by Patti

  The setup = I have this class, Transcript: class Transcript(models.Model): body = models.TextField('Body') doPagination = models.BooleanField('Paginate') numPages = models.PositiveIntegerField('Number of Pages') and this class, TranscriptPages(models.Model): class TranscriptPages(models.Model): transcript = models.ForeignKey(Transcript) order = models.PositiveIntegerField('Order') content = models.TextField('Page Content', null=True, blank=True) The Admin behavior I’m trying to create is to let a user populate Transcript.body with the entire contents of a long document and, if they set Transcript.doPagination = True and save the Transcript admin, I will automatically split the body into n Transcript pages. In the admin, TranscriptPages is a StackedInline of the Transcript Admin. To do this I’m overridding Transcript’s save method: def save(self): if self.doPagination: #do stuff super(Transcript, self).save() else: super(Transcript, self).save() The problem = When Transcript.doPagination is True, I want to manually delete all of the TranscriptPages that reference this Transcript so I can then create them again from scratch. So, I thought this would work: #do stuff TranscriptPages.objects.filter(transcript__id=self.id).delete() super(Transcript, self).save() but when I try I get this error: Exception Type: ValidationError Exception Value: [u'Select a valid choice. That choice is not one of the available choices.'] ... and this is the last thing in the stack trace before the exception is raised: .../django/forms/models.py in save_existing_objects pk_value = form.fields[pk_name].clean(raw_pk_value) Other attempts to fix: t = self.transcriptpages_set.all().delete() (where self = Transcript from the save() method) looping over t (above) and deleting each item individually making a post_save signal on TranscriptPages that calls the delete method Any ideas? How does the Admin do it? UPDATE: Every once in a while as I'm playing around with the code I can get a different error (below), but then it just goes away and I can't replicate it again... until the next random time. Exception Type: MultiValueDictKeyError Exception Value: "Key 'transcriptpages_set-0-id' not found in " Exception Location: .../django/utils/datastructures.py in getitem, line 203 and the last lines from the trace: .../django/forms/models.py in _construct_form form = super(BaseInlineFormSet, self)._construct_form(i, **kwargs) .../django/utils/datastructures.py in getitem pk = self.data[pk_key]

  Read the article

• Index Tuning for SSIS tasks

  - by Raj More

  I am loading tables in my warehouse using SSIS. Since my SSIS is slow, it seemed like a great idea to build indexes on the tables. There are no primary keys (and therefore, foreign keys), indexes (clustered or otherwise), constraints, on this warehouse. In other words, it is 100% efficiency free. We are going to put indexes based on usage - by analyzing new queries and current query performance. So, instead of doing it our old fashioned sweat and grunt way of actually reading the SQL statements and execution plans, I thought I'd put the shiny new Database Engine Tuning Advisor to use. I turned SQL logging off in my SSIS package and ran a "Tuning" trace, saved it to a table and analyzed the output in the Tuning Advisor. Most of the lookups are done as: exec sp_executesql N'SELECT [Active], [CompanyID], [CompanyName], [CompanyShortName], [CompanyTypeID], [HierarchyNodeID] FROM [dbo].[Company] WHERE ([CompanyID]=@P1) AND ([StartDateTime] IS NOT NULL AND [EndDateTime] IS NULL)',N'@P1 int',1 exec sp_executesql N'SELECT [Active], [CompanyID], [CompanyName], [CompanyShortName], [CompanyTypeID], [HierarchyNodeID] FROM [dbo].[Company] WHERE ([CompanyID]=@P1) AND ([StartDateTime] IS NOT NULL AND [EndDateTime] IS NULL)',N'@P1 int',2 exec sp_executesql N'SELECT [Active], [CompanyID], [CompanyName], [CompanyShortName], [CompanyTypeID], [HierarchyNodeID] FROM [dbo].[Company] WHERE ([CompanyID]=@P1) AND ([StartDateTime] IS NOT NULL AND [EndDateTime] IS NULL)',N'@P1 int',3 exec sp_executesql N'SELECT [Active], [CompanyID], [CompanyName], [CompanyShortName], [CompanyTypeID], [HierarchyNodeID] FROM [dbo].[Company] WHERE ([CompanyID]=@P1) AND ([StartDateTime] IS NOT NULL AND [EndDateTime] IS NULL)',N'@P1 int',4 and when analyzed, these statements have the reason "Event does not reference any tables". Huh? Does it not see the FROM dbo.Company??!! What is going on here? So, I have multiple questions: How do I get it to capture the actual statement executing in my trace, not what was submitted in a batch? Are there any best practices to follow for tuning performance related to SSIS packages running against SQL Server 2008?

  Read the article

• Help with error creating SharePoint list (probably due to privilege issues)

  - by Swami

  I'm getting an error when trying to activate a webpart. It activates fine in one setup , but fails in a different one. Administrator in both. Seems like it fails because it's not able to create the list. The error is: Message: Value cannot be null. Stack Trace: at Microsoft.Sharepoint.SPRoleAssignment..ctor at ClientRequestHandler.CreateList(... private static void CreateLists() { try { SPSecurity.RunWithElevatedPrivileges(delegate() { using (SPSite site = SPContext.Current.Site) { using (SPWeb web = site.RootWeb) { string listName = LIST_NAME; bool listExist = ContainList(web, listName); if (!listExist) { AddFieldDelegate _delegate = new AddFieldDelegate(AddAttachmentFields); SPList list = CreateList(web, listName, _delegate); RegisterList(web, list, KEY); } } } }); } catch (Exception ex) { throw new Exception(String.Format("Message: {0} Stack Trace: {1}", ex.Message, ex.StackTrace.ToString())); } } private static SPList CreateList(SPWeb web, string listName, AddFieldDelegate _delegate) { web.AllowUnsafeUpdates = true; SPListTemplateType genericList = new SPListTemplateType(); genericList = SPListTemplateType.GenericList; Guid listGuid = web.Lists.Add(listName, "List", genericList); SPList list = web.Lists[listGuid]; list.Hidden = true; SPView view = _delegate(list); view.Update(); //Remove permissions from the list list.BreakRoleInheritance(false); //Make site owners the list administrators SPPrincipal principal = web.AssociatedOwnerGroup as SPPrincipal; SPRoleAssignment assignment = new SPRoleAssignment(principal); assignment.RoleDefinitionBindings.Add(web.RoleDefinitions.GetByType(SPRoleType.Administrator)); list.RoleAssignments.Add(assignment); //update list changes list.Update(); return list; }

  Read the article

• Rails Heroku Migrate Unknown Error

  - by Ryan Max

  Hello. I am trying to get my app up and running on heroku. However once I go to migrate I get the following error: $ heroku rake db:migrate rake aborted! An error has occurred, this and all later migrations canceled: 530 5.7.0 Must issue a STARTTLS command first. bv42sm676794ibb.5 (See full trace by running task with --trace) (in /disk1/home/slugs/155328_f2d3c00_845e/mnt) == BortMigration: migrating ================================================= -- create_table(:sessions) -> 0.1366s -- add_index(:sessions, :session_id) -> 0.0759s -- add_index(:sessions, :updated_at) -> 0.0393s -- create_table(:open_id_authentication_associations, {:force=>true}) -> 0.0611s -- create_table(:open_id_authentication_nonces, {:force=>true}) -> 0.0298s -- create_table(:users) -> 0.0222s -- add_index(:users, :login, {:unique=>true}) -> 0.0068s -- create_table(:passwords) -> 0.0123s -- create_table(:roles) -> 0.0119s -- create_table(:roles_users, {:id=>false}) -> 0.0029s I'm not sure exactly what it means. Or really what it means at all. Could it have to do with my Bort installation? I did remove all the open-id stuff from it. But I never had any problems with my migrations locally. Additionally on Bort the Restful Authentication uses my gmail stmp to send confirmation emails...all the searches on google i do on STARTTLS have to do with stmp. Can someone point me in the right direction?

  Read the article

• Crystal report fails to load when application is deployed in IIS

  - by user1663380

  I copied the packageTmp over to the inetpub/wwwroot, then added a website and included it as my path installed the crystal report runtime,CRRuntime_32bit_13_0_4 but still did not work i also have crystalreportviewers13 folder in wwwroot/aspnet _client/systemweb/4_0_30319 this is the error I encountered when I go to the page with crystal report may i know where the path is defined? This problem occurs when I deploy my application in IIS. Exception Details: System.Runtime.InteropServices.COMException: Invalid file name. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [COMException (0x800001fb): Invalid file name.] CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0 CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +95 CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +270 [CrystalReportsException: Load report failed.] CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +333 CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +877 CrystalDecisions.CrystalReports.Engine.ReportClass.Load(String reportName, OpenReportMethod openMethod, Int16 parentJob) +1183 CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport() +113 CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSourceInternal(Object val, Type type) +53 CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSource(DataTable dataTable) +66

  Read the article

< Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >