Search Results

Search found 1102 results on 45 pages for 'udp'.

Page 35/45 | < Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >

• Cisco ASA5505 8.2 Multiple Outside IP to Multiple Inside IP

  - by GriffJ

  Trying to setup ASA5505. Semi working but having issues with accessing services from the outside. ASA5505 Basic License, Version 8.2. (plus upgrade to unlimited inside hosts). Alert: I'm a Cisco Noob. 321.321.39.X is a place holder for privacy. I came up with this config and tested it tonight. ASA Version 8.2(1) ! hostname <removed> domain-name <removed> enable password <removed> encrypted passwd <removed> encrypted names ! interface Vlan1 nameif inside security-level 100 ip address 172.21.36.1 255.255.252.0 ! interface Vlan2 nameif outside security-level 0 ip address 321.321.39.10 255.255.255.248 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name <removed> access-list outside_inbound extended permit tcp any host 321.321.39.10 eq pptp access-list outside_inbound extended permit tcp any host 321.321.39.11 eq https access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 993 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq smtp access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 1001 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 465 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq domain access-list outside_inbound extended permit udp any eq domain host 321.321.39.11 eq domain access-list outside_inbound extended permit tcp any host 321.321.39.12 eq www access-list outside_inbound extended permit tcp any host 321.321.39.12 eq https access-list outside_inbound extended permit tcp any host 321.321.39.13 eq www access-list outside_inbound extended permit tcp any host 321.321.39.13 eq https access-list outside_inbound extended permit icmp any any echo-reply access-list outside_inbound extended permit icmp any any source-quench access-list outside_inbound extended permit icmp any any unreachable access-list outside_inbound extended permit icmp any any time-exceeded access-list outside_inbound extended permit icmp any any traceroute access-list outside_inbound extended permit icmp any any echo pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 2 321.321.39.11-321.321.39.14 netmask 255.255.255.248 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface pptp 172.21.37.20 pptp netmask 255.255.255.255 static (inside,outside) 321.321.39.11 172.21.37.14 netmask 255.255.255.255 static (inside,outside) 321.321.39.12 172.21.37.24 netmask 255.255.255.255 static (inside,outside) 321.321.39.13 172.21.37.17 netmask 255.255.255.255 access-group outside_inbound in interface outside route outside 0.0.0.0 0.0.0.0 321.321.39.9 1 route inside 192.168.15.0 255.255.255.0 172.21.36.52 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 172.21.36.0 255.255.252.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet 172.21.36.0 255.255.252.0 inside telnet timeout 60 ssh timeout 5 console timeout 0 threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect pptp inspect ipsec-pass-thru inspect http ! service-policy global_policy global prompt hostname context The servers that had static forwards did not have any outside network access. couldn't ping google.com for instance. mail server couldn't Domain POP the Barracuda spam filter from our ISP etc. So after doing some reading I removed the statics for 172.21.37.11, 12 and 13, and replaced those three with what's below.. static (inside,outside) tcp 321.321.39.11 https 172.21.37.14 https netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 993 172.21.37.14 993 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 smtp 172.21.37.14 smtp netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 1001 172.21.37.14 1001 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 465 172.21.37.14 465 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 domain 172.21.37.14 domain netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.12 www 172.21.37.24 www netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.12 https 172.21.37.24 https netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.13 www 172.21.37.17 www netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.13 https 172.21.37.17 https netmask 255.255.255.255 Now the servers (for instance 172.21.37.14) could ping the outside world again. Mail started flowing (Domain POP was successful) etc. etc. But I forgot to check if webmail worked from the outside admittedly. But the webservers at 172.21.37.17 and 172.21.37.24 still didn't respond from the outside world. Although I was able to PPTP VPN in on 321.321.39.10 (interface) which is the outside interface IP address. and it is static mapped to 172.21.37.20. So I'm thinking there must be something wrong with NAT somewhere? no response from 321.321.39.11 to 321.321.39.14.. Could anyone look over the config and please let me know what I've done wrong? Is there something I've missed? well obviously but.. please help! Thank you.

  Read the article

• BroadCast Messages to multiple client on the same machine

  - by Christopher Chase

  I need to have a server on one machine that broadcasts a message sever second or so, Kind of like a service discovery. The message needs to be received by multiple client processes that could be on the same machine or different machines. Im using delphi7, with indy 9.0.18 where im stuck is if i should be using UDP or IP MultiCast or if its even possible... Ive managed to get it to work with IP Multi Cast with one client per machine, but even after many trys with different bindings.. max/min ports etc, i cant seem to find a solution.

  Read the article

• vb.net program cannot connect to wampserver

  - by user225269

  I have a vb.net program that uses mysql as its database. And it works when the computer has wampservr installed. But the program gets an unhandled exception error when the computer where its running does not have a wampserver. The only thing that is installed in it is the mysql connector net. How do I make it work. I just want the two programs to access the same mysql database. I already opened port 20 by configuring firewall. Both in TCP and UDP. What do I do? Do I have to tweak the codes?

  Read the article

• MTU mismatch between GetIfEntry and netsh

  - by ChrisJ

  I'm working on pseudo-transport layer software that runs over UDP, providing reliable connection-oriented transmission, as an alternative to TCP. In order to maximize network efficiency, we query the MTU of the "best" network adapter upon initialization. MIB_IFROW row = {0}; row.dwIndex = dwBestIfIndex; dwRes = GetIfEntry(&row); Searching online I found that you can use the following netsh commands to query for this same value, from a command prompt (not a C++ API) netsh interface ipv4 show interfaces netsh interface ipv4 show subinterfaces The troubling issue is that while row.dwMtu may be set to 1500, snooping the network traffic on the sending laptop shows that our packets are fragmented into 1300 byte packets. netsh also reports that the MTU is 1300. Clearly the value reported by netsh command is the actual used values. Anyone know what API I can call to get the same values as netsh?

  Read the article

• Benchmark for a .NET WinPcap wrapper

  - by brickner

  I'm developing a .NET wrapper for WinPcap called Pcap.Net. I'm trying to make sure this wrapper has high performance and I want to compare it to WinPcap and to other .net wrappers for WinPcap. The features I want to profile are: WinPcap native features (sending packets in different ways, receiving packets in different ways...) Interpreting packets that Pcap.Net knows how to interpret (like Etherent, IPv4, UDP, TCP, ICMP, ...) Building packet that Pcap.Net knows how to build (the same types it knows how to interpret). I also want to be able to profile the benchmark using Visual Studio 2010 Ultimate profiling tools. My question is: What should my benchmark exactly do to cover these issues and how would you suggest to build it?

  Read the article

• Packing a long binary integer in Ruby

  - by user1056142

  I'm trying to send a very long binary integer over UDP (on the order of 200 bits). When I try to use Array's pack method, it complains the string I'm trying to convert is too large. Am I going about this the wrong way? ruby-1.8.7-p352 :003 > [0b1101001010101101111010100101010011010101010110010101010101010010010101001010101010101011101010101010101111010101010101010101].pack('i') RangeError: bignum too big to convert into `unsigned long' from (irb):3:in `pack' from (irb):3 This number is supposed to represent a DNS query packet (this is for a homework assignment; we're not allowed to use any DNS libraries).

  Read the article

• How to debug packet loss ?

  - by Gene Vincent

  I wrote a C++ application (running on Linux) that serves an RTP stream of about 400 kbps. To most destinations this works fine, but some destinations expericence packet loss. The problematic destinations seem to have a slower connection in common, but it should be plenty fast enough for the stream I'm sending. Since these destinations are able to receive similar RTP streams for other applications without packet loss, my application might be at fault. I already verified a few things: - in a tcpdump, I see all RTP packets going out on the sending machine - there is a UDP send buffer in place (I tried sizes between 64KB and 300KB) - the RTP packets mostly stay below 1400 bytes to avoid fragmentation What can a sending application do to minimize the possibility of packet loss and what would be the best way to debug such a situation ?

  Read the article

• Is there a jdbc driver for SQL Server that can search for database instances on network?

  - by djangofan

  Is there a jdbc driver for SQL Server that can search for database instances on network? Just wanting to emulate "OSQL -L" from the JDBC driver. Dont want to have to call OSQL from JNI or something. I also don't want to have to write my own code for scanning a UDP port. I want my Java application to be able to search for live SQL Servers and prompt me with a list of available servers. Isn't this a reasonable expectation for a JDBC driver? OSQL.exe can do it and so why not the JDBC driver?

  Read the article

• Windows service trace debug messages

  - by Pintac

  HI I wrote a udp server classlibray i hosted it in windows form and it works fine. When i debug the trace and debug messages shows in output. When i host the cl in a windows service none of the debug messages is showing. Both cl and windows service is in debug there is no tracelisteniners specified so it should use outputstring.I even put a messagebox.show in the cl just to make sure the function is getting called in the windows service and it does. So how do i get the trace/debgug message showing.The service is running as localsystem. What am i missing

  Read the article

• Can squid forward DNS queries to a DNS server?

  - by pravin

  This might something be completely impossible to achieve, but before I give it a shot thought I might get some advice from a fellow geek. Would squid proxy DNS queries as well? I would like to forward DNS queries to go through squid and use squid's DNS error page, of course by customizing it. I see the DNS queries are hitting my squid box on UDP port 53. I can setup a port forwarding so that all these queries get sent to squid's port 3128. But would squid understand its a DNS query and forward those queries to the dns server set in squid.conf? I hope my question is clear but please shout up and I would be glad to give you some more info if needed. Thanks guys!

  Read the article

• Programmatic use of ARP

  - by sizzzzlerz

  I have a need for some C or C++ code, compilable under Linux, to be able to take a list of IP addresses of some arbitrary number of remote hosts machines and obtain a ethernet MAC address for each one. These host machines may be on the same subnet or they could be on a different subnet behind a router. Its OK if the MAC address of some or all of the remote hosts is the address of the interface on the router. Ultimately, I want to hand off the IP address and MAC address to an FPGA who will use these pieces of information to format and send UDP/IP packets over ethernet to the hosts. Obviously, the FPGA will also be given its own MAC address and IP address to fill in the source MAC and source IP addresses in the packets. Is there some code I can be pointed to that can create and broadcast ARP packets to these remote machines and receive back the ARP response packets such that the destination MAC addresses can be extracted?

  Read the article

• How can I learn a multitouch screen's communication protocol and write a C# application for it?

  - by puri

  I have got a monitor with multitouch overlay on top of it. It works fine with Windows 7 but I want to write a multitouch application in C# for Windows XP which doesn't support touch feature out of the box. There is no documentation whatsoever and I emailed the manufacturer but never got a reply. However the device works with Google Earth, which doesn't natively support multitouch, on Windows XP. So I think it generates many types of messages together i.e. WM_TOUCH for Windows 7, one for Google Earth COM API, and probably its own messages either in UDP or Windows message form. How can I trap all communications and learn the protocol?

  Read the article

• MultiCast Messages to multiple clients on the same machine

  - by Christopher Chase

  Im trying to write a server/service that broadcasts a message on the lan ever second or so, Kind of like a service discovery. The message needs to be received by multiple client programs that could be on the same machine or different machines. But there could be more than one program on each machine running at the same time. Im using delphi7, with indy 9.0.18 where im stuck is if i should be using UDP or IP MultiCast or if its even possible... Ive managed to get it to work with IP Multi Cast with one client per machine, but even after many trys with different bindings.. max/min ports etc, i cant seem to find a solution.

  Read the article

• shell script redirect output

  - by Andy

  I have a shell script to monitor process due to preventing the process closed. If the process is closed, that script will restart it. BTW, when the system starts, the crontab will run the script automatically. How can I get the output of the process which started by the shell script? #!/bin/bash PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:~/bin export PATH while : do if [ -z "$(ps -ef | grep -v grep | grep 225.0.6.4)" ]; then date +"%m-%d-%y %T" >> /home/andy/log/stream.log echo "225.0.6.4 - 103 not worked and restart process" >> /home/andy/log/stream.log echo "225.0.6.4 - 103 not worked and restart process" /usr/bin/tzap -a 1 -c /home/andy/channels.conf -o - -r -p "D" | /home/andy/ffmpeg -f mpegts -i pipe:0 -c:v libx264 -preset medium -crf 23 -bufsize 3000K -minrate 1200k -maxrate 1200k -pix_fmt yuv420p -g 50 -s 1024x768 -acodec libmp3lame -b:a 128k -ac 2 -ar 44100 -f mpegts udp://225.0.6.4:50000 & fi sleep 1 done

  Read the article

• Multiple Socket Connections

  - by BSchlinker

  I need to write a server which accepts connections from multiple client machines, maintains track of connected clients and sends individual clients data as necessary. Sometimes, all clients may be contacted at once with the same message, other times, it may be one individual client or a group of clients. Since I need confirmation that the clients received the information and don't want to build an ACK structure for a UDP connection, I decided to use a TCP streaming method. However, I've been struggling to understand how to maintain multiple connections and keep them idle. I seem to have three options. Use a fork for each incoming connection to create a separate child process, use pthread_create to create an entire new thread for each process, or use select() to wait on all open socket IDs for a connection. Recommendations as to how to attack this? I've begun working with pthreads but since performance will likely not be an issue, multicore processing is not necessary and perhaps there is a simpler way.

  Read the article

• Books recommendation to learn about java networking

  - by elec

  In order to cover for my (glaring) lack of knowledge in the basics of networking, I'm looking for a book which would ideally cover: - 1 or 2 chapters on the transport layer: tcp, udp... - 1 or 2 chapters on the application layer: http, dns... - rest of the book would be devoted to pratical way of sending data across the wire using Java-related technologies. This would involve discussions about existing products (eg. hessian, protobuf, thrift, tibco...) , performances comparisons, case studies...etc.. Does such a book exist ?

  Read the article

• Raw socket sendto() failure in OS X

  - by user37278

  When I open a raw socket is OS X, construct my own udp packet (headers and data), and call sendto(), I get the error "Invalid Argument". Here is a sample program "rawudp.c" from the web site http://www.tenouk.com/Module43a.html that demonstrates this problem. The program (after adding string and stdlib #includes) runs under Fedora 10 but fails with "Invalid Argument" under OS X. Can anyone suggest why this fails in OS X? I have looked and looked and looked at the sendto() call, but all the parameters look good. I'm running the code as root, etc. Is there perhaps a kernel setting that prevents even uid 0 executables from sending packets through raw sockets in OS X Snow Leopard? Thanks.

  Read the article

• How do you measure latency in low-latency environments?

  - by Ajaxx

  Here's the setup... Your system is receiving a stream of data that contains discrete messages (usually between 32-128 bytes per message). As part of your processing pipeline, each message passes through two physically separate applications which exchange the data using a low-latency approach (such as messaging over UDP) or RDMA and finally to a client via the same mechanism. Assuming you can inject yourself at any level, including wire protocol analysis, what tools and/or techniques would you use to measure the latency of your system. As part of this, I'm assuming that every message that is delivered to the system results in a corresponding (though not equivalent) message being pushed through the system and delivered to the client. The only tool that I've seen on the market like this is TS-Associates TipOff. I'm sure that with the right access you could probably measure the same information using a wire analysis tool (ala wireshark) and the right dissectors, but is this the right approach or are there any commodity solutions that I can use?

  Read the article

• SNMP from the browser

  - by moogs

  There"s this idea of having a web app search for devices in the network (with elevated user permissions, of course). Checking the silverlight and flash APIs, there does not seem to be a way to do SNMP ( the UDP APIs are limited to multicasting media ). Anyone know a clever workaround? In windows, a small XBAP utility can do the SNMP stuff, but that leaves out the Mac OS X platform. Thanks for any ideas. ( I do have a SO account but I"m in a not so trustworthy public PC right now so I didn"t log in. )

  Read the article

• innovation for technical high school

  - by gnuze

  I work in a high school in Italy. Our goal is forming computer programmers in 5 years. Nowaday, we teach vb.net on Win ( desktop applications using ADO on Access ), C on linux ( process, threads ) , C++ on Linux ( sockets TCP/UDP with UML ), and a bit of ASP.net, flash programming, PHP, Joomla and PIC Microcontrollers. We are looking for something innovative to add in our programs of study, but every teacher have a different point of view: we are debating about python, C#, Arduino, Silverlight and smartphones programming. Any suggestions? Tx in advance.

  Read the article

• How can I do an SSL connection with PHP

  - by Anth0

  Hi, I need to develop a PHP class to communicate with Apple servers in order to do Push notification (APNS). I have the certificate (.pem) and I tried to follow various tutorials found on Internet but I'm still getting error trying to connect to ssl://gateway.sandbox.push.apple.com:2195 with stream socket : $apnsHost = 'gateway.sandbox.push.apple.com'; $apnsPort = 2195; $apnsCert = 'apns-dev.pem'; $streamContext = stream_context_create(); stream_context_set_option($streamContext, 'ssl', 'local_cert', $apnsCert); $apns = stream_socket_client('ssl://'.$apnsHost.':'.$apnsPort, $error, $errorString, 2, STREAM_CLIENT_CONNECT, $streamContext); A telnet on this URL works so port 2195 is opened. Openssl is activated on PHP since I get "Registered Stream Socket Transports : tcp, udp, ssl, sslv3, sslv2, tls" with a phpinfo(). My certificate is well read (PHP is_readable(certif.pem) returns true on the file) Is there anything else to activate in Apache or PHP to get it work ?

  Read the article

• How does one capture H.323 voice traffic on a VOIP network?

  - by Chris Holmes

  What I am trying to do is capture the WAV data of a phone conversation on a VOIP network using SharpPCap/PCap.Net. We are using the H.323 recommendation and my understanding is that voice data is located in the RTP packets. However, there is no way to heuristically determine if a UDP packet is a RTP packet, so we have to do more work before we can capture the data. The H.323 recommendation apparently uses a lot of traffic on specific TCP ports to negotiate the call before the WAV data is sent via RTP. However, I am having very little luck determining what data is actually sent on those TCP ports, when it is sent, what the packets look like, how to handle it, etc. If anyone has any information on how to go about this I'd really appreciate it. My Google-Fu seems to be failing me on this one.

  Read the article

• Can we represent bit fields in JSON/BSON?

  - by zubair

  We have a dozen simulators talking to each other on UDP. The interface definition is managed in a database. The simulators are written using different languages; mostly C++, some in Java and C#. Currently, when systems engineer makes changes in the interface definition database, simulator developers manually update the communication data structures in their code. The data is mostly 2-5 bytes with bit fields for each signal. What I want to do is to generate one file from interface definition database describing byte and bit field definitions and let each developer add it to his simulator code with minimal fuss. I looked at JSON/BSON but couldn't find a way to represent bit fields in it. Thanks Zubair

  Read the article

• What is the largest file size we can transfer through air application?

  - by Naveen kumar

  Hi all, I'm trying to transfer large file(1Gb+) using UDP(in packets) through air application. I'm transfering byteArray by taking chunks of packets from FileStream. But its giving 'Error #1000: The system is out of memory' at sender side after certain number of packets sent and by this time the downloaded file size at server side is 256 MB. I tried with other files but after downloading 256MB, sender is giving the same error. Is it because of the file stream size? How can I solve this problem so that I can transfer files of GB size.

  Read the article

• Automatic setting of Local Time zone w/DST

  - by Frode Roed

  I can derive latitude and longitude and UTC time from GPS NMEA sentences. Now, how can I automaticly adjust the Windows local time zone on my PC (2003 Server OS), based on this? Also, Is there an easy way of distributing this to clients based on code or apps software? Preferred programming environment is .NET, C# & Visual Studio. I use a GPS Time server (GPS clock with antenna) today, but this could not support other than UTC. I want to set computers in my TCP/UDP network to correct time zone w/DST based on coordinates derived from GPS, so manually setting of all is not required.

  Read the article

< Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >