Search Results

Search found 11961 results on 479 pages for 'boot arguments'.

Page 350/479 | < Previous Page | 346 347 348 349 350 351 352 353 354 355 356 357  | Next Page >

• SATA-II motherboard and drives but only connected at SATA-I

  - by Shevek

  I have an Abit AB9 QuadGT motherboard which has a SATA-II controller. Connected to it I have a Kingston SSDNow V Series 64GB as boot drive and a Seagate Barracuda 7200.10 as a data drive. I also have 2 x Optiarc AD-7170S DVD burners attached by SATA. Both SSD and HDD are SATA-II and the optical drives are SATA-I. I have just run CrystalDiskInfo and this is reporting that both SSD and HDD are connected at SATA-I (1.5 Gbps), not SATA-II (3.0 Gbps). I have the BIOS set up to use SATA drives in IDE mode. So a few questions: Is CrystalDiskInfo reporting correctly? Are the optical drives causing the SSD & HDD to connect at the slower rate? Is there any setting to force the SSD & HDD to use SATA-II? I'm running Windows 7 Ultimate.

  Read the article

• Hard drive device names are different from one reboot to another in Ubuntu.

  - by Mike

  I have an Ubuntu machine (10.04 but had the same problem in 8.04) with a bunch of drives that I use as a file server. 1 SATA that I boot off of. 2 IDE that in RAID1 and 2 SATA in RAID1. The problem is the drives that I have in RAID1 change device names on reboot. This is a problem because the in my mdadm.conf a reference to /dev/sda1, for example, might not work the next time I reboot because /dev/sda1 could be a disk from another array. Any help getting around this would be appreciated. -Mike

  Read the article

• Hard drive device names are different from one reboot to another in Ubuntu.

  - by Mike

  I have an Ubuntu machine (10.04 but had the same problem in 8.04) with a bunch of drives that I use as a file server. 1 SATA that I boot off of. 2 IDE that in RAID1 and 2 SATA in RAID1. The problem is the drives that I have in RAID1 change device names on reboot. This is a problem because the in my mdadm.conf a reference to /dev/sda1, for example, might not work the next time I reboot because /dev/sda1 could be a disk from another array. Any help getting around this would be appreciated. -Mike

  Read the article

• HP Recovery options: System Recovery not showing

  - by sha404

  I am using HP Pavilion dv4 notebook. Previously, there were following options in Recovery Manager(using f11 during boot): +System Recovery +Factory Restore +Minimized Image Recovery The System Recovery option allows me to restore only Operating system drive e.g. C:\ drive, keeping all other user (me) created hard drives intact. I made a set of recovery disk. Since then I don't see the System Recovery option in HP Recovery Manager. But all other options are still there. But when I use recovery disks that i created earlier, that option e.g. System Recovery is shown. But It's really boring and time consuming to use disks for recovery. So, what's the problem with internal HP Recovery Manager? Why isn't it showing that option?

  Read the article

• "Input not Supported" on external monitor

  - by Shalan

  when it rains, it pours! Im helping a friend with his Dell Inspiron 1520. The hdd crashed and and top of that, the screen is cracked. I've replaced the hdd (SATA-5400), but the lcd replacement is only comin in a months time. I've tried to: hook the laptop up to an Acer 18.5" lcd monitor via VGA, boot up into Windows 7 installer, get to the Step-1 screen, Switch to external display (Function-F8) ...and get the "Input not supported" message on the Acer lcd. I know that this is a resolution problem, but cant for the life of me figure out how to solve this. I've also tried, hooking it up to my TV via Composite cables (got a VGA-Composite adaptor). Please could someone advise me what to do? -Thank u!

  Read the article

• Recover a lost IBM DS4300 SAN password?

  - by Daniel

  I have a pair of IBM DS4300 SAN units that I need to perform a firmware upgrade on. Unfortunately the admin passwords on these units have been lost and now need to be reset. I had hoped the default password of 'infiniti' would work but it seems that it must have been changed. I know the method here is to contact IBM but the cost of that phone call is ludicrous if someone out here knows what they're going to tell me to do. These units are out of warranty and the cost of support is beyond what we have the budget for. Is there an interrupt I can enter during the boot process (similar to a cisco password recovery) or is there a hardware/software tool I require? Please, if anyone has ever gone through the process of an IBM password recovery I’m asking for a little help. EDIT: Just to clarify, the password I need to reset is the one used for serial cable access and not for storage manager. Sorry if I have caused more confusion.

  Read the article

• Can I flash a PCI-E device's Firmware in a VM if the VM has exclusive IOMMU access?

  - by RibaldEddie

  I have a PCI-E Dell Perc 6/i RAID card that I'd like to flash with the latest firmware. Apparently I need either a Redhat / Centos OS or Windows in order to flash the firmware, but I have a VMWare 5.0.1 ESX hypervisor installed on the box and a CentOS guest OS. My motherboard support IOMMU and I have successfully used VMWare's PCI Passthrough feature to give VMs exclusive access to a PCI-E device. Is it safe to flash the firmware of a PCI-E device if that device is passed through to a single VM using the passthrough feature of VMware? Or should I boot one of the supported OSes directly on the bare metal?

  Read the article

• debian lenny xen bridge networking problem

  - by Sasha

  DomU isn't talking to the world, but it talks to Dom0. Here are the tests that I made: Dom0 (external networking is working): ping 188.40.96.238 #Which is Domu's ip PING 188.40.96.238 (188.40.96.238) 56(84) bytes of data. 64 bytes from 188.40.96.238: icmp_seq=1 ttl=64 time=0.092 ms DomU: ping 188.40.96.215 #Which is Dom0's ip PING 188.40.96.215 (188.40.96.215) 56(84) bytes of data. 64 bytes from 188.40.96.215: icmp_seq=1 ttl=64 time=0.045 ms ping 188.40.96.193 #Which is the gateway - fail PING 188.40.96.193 (188.40.96.193) 56(84) bytes of data. ^C --- 188.40.96.193 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1013ms The system is debian lenny with a normal setup. Here is my configs: uname -a Linux green0 2.6.26-2-xen-686 #1 SMP Wed Aug 19 08:47:57 UTC 2009 i686 GNU/Linux cat /etc/xen/green1.cfg |grep -v '#' kernel = '/boot/vmlinuz-2.6.26-2-xen-686' ramdisk = '/boot/initrd.img-2.6.26-2-xen-686' memory = '2000' root = '/dev/xvda2 ro' disk = [ 'file:/home/xen/domains/green1/swap.img,xvda1,w', 'file:/home/xen/domains/green1/disk.img,xvda2,w', ] name = 'green1' vif = [ 'ip=188.40.96.238,mac=00:16:3E:1F:C4:CC' ] on_poweroff = 'destroy' on_reboot = 'restart' on_crash = 'restart' ifconfig eth0 Link encap:Ethernet HWaddr 00:24:21:ef:2f:86 inet addr:188.40.96.215 Bcast:188.40.96.255 Mask:255.255.255.192 inet6 addr: fe80::224:21ff:feef:2f86/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3296 errors:0 dropped:0 overruns:0 frame:0 TX packets:2204 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:262717 (256.5 KiB) TX bytes:330465 (322.7 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) peth0 Link encap:Ethernet HWaddr 00:24:21:ef:2f:86 inet6 addr: fe80::224:21ff:feef:2f86/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:3407 errors:0 dropped:657431448 overruns:0 frame:0 TX packets:2291 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:319941 (312.4 KiB) TX bytes:338423 (330.4 KiB) Interrupt:16 Base address:0x8000 vif2.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:27 errors:0 dropped:0 overruns:0 frame:0 TX packets:151 errors:0 dropped:33 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:1164 (1.1 KiB) TX bytes:20974 (20.4 KiB) ip a s 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: peth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000 link/ether 00:24:21:ef:2f:86 brd ff:ff:ff:ff:ff:ff inet6 fe80::224:21ff:feef:2f86/64 scope link valid_lft forever preferred_lft forever 4: vif0.0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 5: veth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 6: vif0.1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 7: veth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 8: vif0.2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 9: veth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 10: vif0.3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 11: veth3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 12: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 00:24:21:ef:2f:86 brd ff:ff:ff:ff:ff:ff inet 188.40.96.215/26 brd 188.40.96.255 scope global eth0 inet6 fe80::224:21ff:feef:2f86/64 scope link valid_lft forever preferred_lft forever 14: vif2.0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 32 link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff inet6 fe80::fcff:ffff:feff:ffff/64 scope link valid_lft forever preferred_lft forever brctl show bridge name bridge id STP enabled interfaces eth0 8000.002421ef2f86 no peth0 vif2.0 ip r l Dom0: 188.40.96.192/26 dev eth0 proto kernel scope link src 188.40.96.215 default via 188.40.96.193 dev eth0 DomU: 188.40.96.192/26 dev eth0 proto kernel scope link src 188.40.96.238 default via 188.40.96.193 dev eth0

  Read the article

• Unable to resolve FQDN, hostname works

  - by HannesFostie

  We are having an issue where computers who are not part of the domain cannot resolve the FQDN of a server (but regular hostname and ip do resolve). The strange thing is that this does work when the computer is added to the network. Our domain name is rather long, its something along the lines of "team.dept.company.com", could that be it? DHCP server passes along the proper DNS, Name and WINS servers, as well as the domain name. I thought that should've solved the problem, but apparently not really. Our domain is still windows2003 EDIT: I am starting to believe I can narrow this down to a problem either with the vmware tools NIC drivers that are embedded in my winPE boot image, or to the fact that I'm trying to do this from inside a VM. Pinging a FQDN at the same time when using a different task sequence on a physical machine works.

  Read the article

• Where Debian Lenny stores initial ifconfig values?

  - by Kuroki Kaze

  With upgrade of VMWare Player I suddenly found my Debian Lenny VM not getting IP address. Some DHCP issue maybe, I don't know. So I have to set it manually every boot in Player window, via: ifconfig eth0 down ifconfig eth0 192.168.175.128 netmask 255.255.255.0 up I usually start up VM and then connect to it via SSH, so this procedure bothers me. Sure I can add it to startup script, but is there some special place to enter these values? Like, some config file or so?

  Read the article

• RHEL 5.x SCSI Driver .img update for initrd.img

  - by zmische

  I have production DB server (RHEL 5.1) with LSI Megaraid driver loaded during setup via DUD (Driver Upd Diskett). Now I'd like to update kernel and other packeges to 5.4 version. I also downloaded new LSI SCSI driver (megasr-13.11.0922.2009-1-rhel50-u4-all.img ). Could you explain the necessary steps to make this driver visible on boot for new kernel (lets assume, that I've already update kernel to 5.4)? I read the article on Redhat - "How do I add a driver to the initrd.img". Does it contain all the steps I need? Thanks in advance!

  Read the article

• Entering BIOs Setup from Supermicro IPMI KVM

  - by Joshua Lim

  I'm having trouble getting into BIOs Setup from Supermicro IPMI "KVM" - Remote Control Console Redirection. I need to change the boot order to CDROM first. I'm running Windows 2008 server. After some Googling, it says here that the method is to: Press TAB to enter Setup screen. Press Esc twice to take effect. http://www.supermicro.com/support/faqs/faq.cfm?faq=6222 A month ago, I tried that 30-40 times + DEL, over 2 hours, it worked. Now, I've been trying the same key combination for more than an hour, rebooting each time it failed, it still doesn't work. Note: I've only got a notebook computer, no extra monitor.

  Read the article

• SATA 300 mobo and drives but only connected at SATA 150

  - by Shevek

  I have an Abit AB9 QuadGT motherboard which supports SATA 300 drives Connected to it I have a Kingston SSDNow V Series 64GB as boot drive and a Seagate Barracuda 7200.10 as a data drive. I also have 2 x Optiarc AD-7170S DVD burners attached by SATA Both SSD and HDD are SATA 300 and the optical drives are SATA 150 I have just run CrystalDiskInfo and this is reporting that both SSD and HDD are connected at SATA 150, not SATA 300. I have the BIOS set up to use SATA drives in IDE mode. So a few questions: Is CrystalDiskInfo reporting correctly? Are the optical drives causing the SSD & HDD to connect at the slower rate? Is there any setting to force the SSD & HDD to use SATA 300? I'm running Windows 7 Ultimate

  Read the article

• Windows 7 64 Bit Can't Get Past Format

  - by Soren

  favorite Just assembled a new machine: MSI 880GM-E41 motherboard 500GB Samsung hard drive AMD Athlon II X4 640 processor 4GB RAM Windows 7 64 Bit LITE-ON Black 4X Blu-ray reader I boot up, start the install. When it gets to the screen to select what partition, the motherboard loses power. It doesnt make sense, I can leave it in the bios settings for a very long time and it doesnt lose power. When it does lose power, the monitor shuts down and the mouse loses power, but the power light stays on. I cannot tell if it is a harware or software problem.

  Read the article

• How to roll-your-own live CD for safe home browsing

  - by user36533

  Hi, I'm interested in booting-off-flash (i.e. like livecd) for more secure online banking at home. -I like system rescue CD, but AFAIK it doesn't have the wifi drivers. (These are convenient) -ubuntu live cd has the wi-fi drivers, but also has a lot of stuff I don't need -I'd like a way to save some basic config settings (e.g. wifi SSID and passphrase), so that wifi works upon startup, i.e. without having to re-enter the settings. What's the best way to 'roll my own slightly-customized boot-from-flash live cd? thanks, bill

  Read the article

• Free space not reclaimed after online resizing ext4 in Ubuntu 9.10

  - by TiansHUo

  My root partition was filling up, with only 500 mbs left, I wanted to resize my root partition from 20 Gb to 40Gb So I resized my partition by using these steps: Using Gparted to resize another partition to give space for the EXT4 Using fdisk, deleting the root partition (on /dev/sda2), and creating it again using the new size resize2fs /dev/sda2 Updating grub2 But now the problem is that although I can boot in my new partition and the new partition shows it is 40Gb, but the free size was still 500mb. So I booted from a LiveCD and checked with e2fsck -p /dev/sda2, it reported clean. So I added the -f flag (force check), still, the drive is full.

  Read the article

• Windows Explorer is blank

  - by Scott Mitchell

  I am using Windows 7 Utlimate x64. Once a week, or so, when I boot up n the morning and launch Windows Explorer it shows up blank, as the following screen shot show. Clicking on my Computer doesn't load anything. Interestingly, I can go the the Address bar at the top and type in a folder name. This brings up that folder's files and subfolders, but as I drill around the tree of folders on the left only shows the immediate folder and not its siblings. There's no plus icon to expand the folder, etc. My usual "solution" is to reboot, which typically brings everything back to normal, but this is a frustrating remedy. Any idea what's going on and how to fix it? Some Googling turned up this discussion, but the remedy was to uninstall a particular piece of software that I don't have installed (Virtual Clone Drive). Thanks

  Read the article

• Changing Windows Media Center StartRecording Task Scheduler options

  - by T Reddy

  Hi, I'm experiencing some occasional crashes waking from sleep and I believe it may be related to the Corsair SSD F40GB2 as my boot disk...or the new Ceton tuner I recently installed... I dunno what the real problem is as I can't reproduce the problem manually. I read somewhere that I should not allow the hard disks to sleep...so I'm trying that in the meantime... At any rate, I don't really care that the computer crashes so long as WMC will start recording the task as soon as possible...the task is scheduled to wake the computer 5 minutes before the recording starts. I noticed that there is a StartRecording param in the Media Center folder in Task Scheduler. There is an option (currently unchecked) that will retry a failed task. I would like to know if there is a way to enable that checkbox. My hope is that if my PC crashes when waking up for this task, that after it reboots the task will trigger again and start recording. Thanks!

  Read the article

• Dell R610 memory configuration for all 12 slots

  - by Neal

  I purchased 12 sticks of RAM on eBay to go into a Dell R610 server. The RAM is ECC REG PC3-12800 DDR3-1600 yet when I occupy all 12 slots with this ram I get the following error on boot: MEMORY Initialization Warning: Memory Size May be Reduced MEMBIST failure – The following DIMM has been disabled by Bios: DIMM B2 MEMBIST failure – The following DIMM has been disabled by Bios: DIMM B5 I am using all of the latest versions, BIOS, etc. I am using 2 x x5660 processors. What is causing this issue and is it correctable? If this RAM is incorrect what is correct to maximize the RAM on this server? Thank you.

  Read the article

• HP ML350G6 running hyper-V 2008 r2 resets itself every 2 hours

  - by GT

  The system started resetting itself exactly every 2 hours. These are the messages in the iLO2 log: Informational iLO 2 03/07/2010 20:40 03/07/2010 20:40 1 Server power restored. Caution iLO 2 03/07/2010 20:40 03/07/2010 20:40 1 Server reset. It's not an ASR reset (that would show in the log) Redundant power supplies, swapped but no change. Turned off all virtual machines (i.e. now only running hypervisor) but not OK Boot HP smartstart diagnostics disk, ALL OK Diagnostic disk reports no errors Went back to booting Hypervisor and the problem is back. Seems the hyper-V system disk has got a time based program (virus) causing the reset. I thought the hypervisor had a small attack surface and should be OK. All virtual machines (SBS2008, Win7 and Win XP) and network computers are protected with TrendMicro WFBS. I am about to rebuild the disk (I have backups) but wondered if there were any suggestions to try first???

  Read the article

• HP ML350G6 running hyper-V 2008 r2 resets itself every 2 hours

  - by GT

  The system started resetting itself exactly every 2 hours. These are the messages in the iLO2 log: Informational iLO 2 03/07/2010 20:40 03/07/2010 20:40 1 Server power restored. Caution iLO 2 03/07/2010 20:40 03/07/2010 20:40 1 Server reset. It's not an ASR reset (that would show in the log) Redundant power supplies, swapped but no change. Turned off all virtual machines (i.e. now only running hypervisor) but not OK Boot HP smartstart diagnostics disk, ALL OK Diagnostic disk reports no errors Went back to booting Hypervisor and the problem is back. Seems the hyper-V system disk has got a time based program (virus) causing the reset. I thought the hypervisor had a small attack surface and should be OK. All virtual machines (SBS2008, Win7 and Win XP) and network computers are protected with TrendMicro WFBS. I am about to rebuild the disk (I have backups) but wondered if there were any suggestions to try first???

  Read the article

• Will my system fsck when I reboot?

  - by Tom Newton

  ...and how do I find out? Say I am about to reboot a server. I would like to minimize downtime, so thinking about wrapping reboot in an alias that says "hang on buddy, you're going to hit a fsck on boot". Next question.. what's the best way to say "lets do it next time?" set the last check date? I know tune2fs can set a bunch of parameters, but how would I get em?

  Read the article

• Vista Startup Repair cannot repair my Toshiba Laptop (L300D)

  - by tdot

  I installed some updates, and now the computer doesn't boot up, it just keep's telling me to go to repair, which doesn't fix the problem. I see the BSOD on startup, but it flashes by too quick. (I also don't have Vista on DVD to do a reinstall if I need to) This is what I get from the Startup Repair details Problem Event Name StartupRepair V2 Problem Signature 01: External Media Problem Signature 02: 6.0.6001.18000.6.0.6001.18000 Problem Signature 03: 2 Problem Signature 04: 131074 Problem Signature 05: BadDriver Problem Signature 06: NoBootFailure Problem Signature 07: 0 Problem Signature 08: 0 Problem Signature 09: unknown Problem Signature 10: 1168 OS Version: 6.0.6001.2.1.0.256.1 Local ID: 1033 Any help will be appreciated. Thanks.

  Read the article

• Late 2008 Unibody MacBook Pro, Snow Leopard EFI 1.8 downgrade

  - by SiLo

  Question: Does anyone know of an EFI downgrade for user on 1.8? I have found a 1.7 to 1.6 downgrade, but once on 1.8 this downgrade no longer works. Background: After upgrading to Snow Leopard, and installing the EFI 1.8 update (as recommended by Software Update), I have lost the ability to burn discs. This also includes when using external burners and when booting into Vista using Bootcamp. Other seemingly related problems to the EFI I have are, chronic overheating, random temporary beachball lockups, longer boot times. These 'other' problems have been solved for other users who experienced these problems on EFI 1.7, but were able to rollback to 1.6. I am looking for a solution that does not require sending my computer back to Apple.

  Read the article

• sudo: must be setuid root

  - by Phuong Nguyen

  Recently, due to some messy stuff with master boot record, I have to re-install my Ubuntu. Before doing that, I back up all folder (exclude root, bin, sbin, tmp, media, mnt) to a NTFS partition. After installation of Ubuntu, I copied back all the folder using a nautilus (running by sudo nautilus). After that, I reboot my computer. And boom, now I cannot run sudo any more, my network services cannot run. When I run sudo from a terminal, I ge "must be setuid root" error. In ubuntu, root account is disabled by default, I don't know why all these files is no longer under ownership of my account. How would I recover back?

  Read the article

< Previous Page | 346 347 348 349 350 351 352 353 354 355 356 357  | Next Page >