Search Results

Search found 27258 results on 1091 pages for 'installed programs'.

Page 350/1091 | < Previous Page | 346 347 348 349 350 351 352 353 354 355 356 357  | Next Page >

• why does my computer crash?

  - by chobo2

  Hi my computer keeps crashing and I don't know why. At first I thought because I had my cpu over clocked that it all of sudden was crashing. So I set my cpu back to regular speed. This did not help. I then thought it was because 2 sticks of my memory where from a computer that suffered from a power surge. However I just ran the windows memory diagnostic tool( extended) and after like 6 hours of testing my memory it found no errors. So now the only thing that is left is windows 7 64bit. I first over clocked my cpu for a couple months while running XP. Never had a problem. I installed the memory and windows 7 at the same time. But I not sure if it is my memory now since it passed the diagnostic tests. However I am not sure if it is windows 7 either has I installed it twice in the last year. I really don't want to go back to XP to find out if this is the case. So here are my blue screens of deaths(from bluescreen). https://sites.google.com/site/myerrorswin7/errors (I hope you enjoy my great site lol) As you can see most of them are different NTFS_FILE_SYSTEM KMODE_EXCEPTION_NOT_HANDLED BAD_POOL_HEADER IRQL_NOT_LESS_OR_EQUAL SYSTEM_THREAD_EXCEPTION_NOT_HANDLED SYSTEM_SERVICE_EXCEPTION

  Read the article

• TFTP Timing Out on Ubuntu VM

  - by valsidalv

  I'm running a Windows 7 PC with VMware installed which has my Ubuntu (10.04 Lucid Lynx). I recently installed a DHCP server and TFTP (Xinet tftpd) using these instructions. I've mapped a network drive so that my Windows has access to all the files in my VM through a 192.x.x.x IP address. I'm trying to throw some custom firmware onto a router. The router has its own built-in TFTP utility that will download the image. It successfully manages to do everything but it is slow because it writes it to flash memory. There is another method that is much quicker because it writes to RAM directly but it must use the TFTP server in Ubuntu. The issue I'm facing is that the Ubuntu TFTP transfer seems to be timing out. The transfer starts but never goes past ~60%. Here's my /etc/xinetd.d/tftp file (similar to a known working config): service tftp { protocol = udp port = 69 socket_type = dgram wait = yes user = nobody server = /usr/sbin/in.tftpd server_args = -s /home/user/tftp/ disable = no cps = 300 2 per_source = 60 } I've done some searching but can't find any parameters for this file to control timeout time or number of retries. The last two arguments (cps, per_source) and completely alien to me (can anyone explain). I have a few possible solutions but the easiest would be to get this TFTP server working. Can anyone help? Either with a timeout configuration or maybe even recommend a different TFTP server? Thanks!

  Read the article

• Enable gzip on Nginx

  - by Rob Wilkerson

  Yes, I know that there are a lot of other questions that seem exactly like this out there. I think I must've looked all of them. Twice. In desparation, I'm adding another in case my specific configuration is the issue. Bear with me. First, the question: What do I need to do to get gzip compression to work? I have an Ubuntu 12.04 server installed running nginx 1.1.19. Nginx was installed with the following packages: nginx nginx-common nginx-full The http block of my nginx.conf looks like this: http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; sendfile on; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_disable "msie6"; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } Both PageSpeed and YSlow are reporting that I need to enable compression. I can see that the request headers indicate Accept-Encoding:gzip,deflate,sdch, but the response headers do not have the corollary Content-Encoding header. I've tried various other config values (gzip_vary on, gzip_http_version 1.0, etc.), but no joy. As far as I know, I can only assume that nginx was compiled with compression support, but if there's any way to verify that, I'd love to know. If anyone sees anything I'm missing or can suggest further debugging, please let me know. I'm no sysadmin and I'm new to Nginx so I've exhausted everything I can think of or have read. Thanks.

  Read the article

• E-mail duplication problem

  - by Gavin Osborn

  I have taken out a hosting agreement with a well respected hosting provider for a couple of internet facing servers. We have deployed several applications to these servers which send various e-mails back to us for reporting purposes. Context: Each server runs Windows Server 2003 R2 with the IIS 6.0 SMTP service installed. Each application is configured to use the local instance of IIS to send e-mails. The external IP address of each server is mapped to a particular domain eg: server1.mydomain.com server2.mydomain.com These e-mails are sent from a company domain name and not the domain name of the hosted servers (eg: [email protected]) Symptoms: A small number (<1%) of e-mails sent from these applications appear to be duplicated. These are exact duplicate in terms of both content and message headers. The Fix: I contacted my hosting provider and they told me this was a common problem & instructed me to: Change the HELO response of your mail server service to a FQDN (server1.mydomain.com && server2.mydomain.com) Create a DNS A record that resolves the FQDN of your mail server to the primary IP address of your sending mail server. Create a PTR record that resolves your primary IP address back to your mail server's FQDN In the sending domain's (mycompanydomain.com) DNS zone file, add the appropriate SPF record for your hosted servers. eg: v=spf1 a mx include:mydomain -all The Problem Continues: I made all of the changes as prescribed above, I was a little hesitant because these steps seemed to suggest they were more for stopping your messages getting blocked than they were for stopping them from being duplicated - but I am certainly no expert in these matters. It has been 5 days since I applied this fix and the problem still persists. I am certain that these problems are not a bug in the software because they are 4 different applications installed on 2 different servers, all of whom are exhibiting this strange behaviour. This behaviour has also not been seen in our UAT environment. Were my hosts correct to suggest this fix? If not, does anyone know what could be the cause of this problem? Many Thanks

  Read the article

• How can I format an SD card with a more robust Linux-usable filesystem with a specific cluster size for better write performace?

  - by Harvey

  Goal: microSD card formatted... for best write performance for use only with embedded Linux for better reliability (random power failures may occur) using an 64kB cluster size I'm using an 8GB microSD card for data storage inside an embedded Linux/ARM device. The SD card is not removable. I've been using ext3 instead of the pre-installed FAT32 because it seems to better handle random power failures during writes. However, I kept noticing that my write performance is always best with the pre-installed FAT32 from Kingston. If I reformat the card with FAT32, the performance still suffers. After browsing wikipedia, I stumbled upon the following comment saying that some cards are optimized for specific cluster sizes. In my case, the Kingston comes pre-formatted for an 64kB cluster size. Risks of reformatting Reformatting an SD card with a different file system, or even with the same one, may make the card slower, or shorten its lifespan. Some cards use wear leveling, in which frequently modified blocks are mapped to different portions of memory at different times, and some wear-leveling algorithms are designed for the access patterns typical of the file allocation table on a FAT16 or FAT32 device.[60] In addition, the preformatted file system may use a cluster size that matches the erase region of the physical memory on the card; reformatting may change the cluster size and make writes less efficient.

  Read the article

• Whats the easiest route to trying out mono 2.6?

  - by E J

  We have several web applications built on Microsoft technologies (asp.net+mvc framework, built using VS2008, MS SQL Server). I have recently be playing with Ubuntu (9.10), installed using Wubi, and wanted to see if I can get our apps running on a foss software stack. I have got the hang of the very basics of Postgresql and I have read that there is some support for Linq to SQL in mono (as of 2.6) as well as asp.net/MVC. However I am unsure how to go about getting Mono 2.6 up and running. Here is what I have discovered so far: Ubuntu is not meant for the 'cutting edge' it is designed to be stable hence, it sometimes takes a release cycle or two for new software to make it to the repositories Mono is already installed by default, but it is likely to stay at version 2.4 for at least the 10.4 release You can install paralell environments of Mono, if you know what your doing. I have had a go at setting up parallel environments, but haven't had any luck yet. (And TBH I am not certain that that will do what I think it's gonna do). (tl;dr start here) Is there a distribution of Linux similar enough to Ubuntu, that I wouldn't have to start the learning curve all over again, but that will let me install Mono 2.6, Postgresql, (and possibly mono-develop 2.4)? Or should I persist with Ubuntu?

  Read the article

• dpkg broken while upgrading Debian Etch to Lenny

  - by artvolk

  Good day! While trying to recover a box to lenny it seems I've broken things. It upgrades libc and glib after that dpkg seems to be broken. I can run apt-get, but it gets segmentation fault from dpkg: # apt-get -f install Reading package lists... Done Building dependency tree... Done 0 upgraded, 0 newly installed, 0 to remove and 316 not upgraded. 9 not fully installed or removed. Need to get 0B of archives. After unpacking 0B of additional disk space will be used. /bin/sh: line 1: 4606 Segmentation fault /usr/sbin/dpkg-preconfigure --apt E: Sub-process /usr/bin/dpkg received a segmentation fault. I can login via SSH but even ls is not working: # ls Segmentation fault Is there anything I can do remotelly via SSH? # ldd /bin/ls linux-gate.so.1 => (0xffffe000) librt.so.1 => /lib/tls/i686/cmov/librt.so.1 (0xb7fc8000) libacl.so.1 => /lib/libacl.so.1 (0xb7fc2000) libselinux.so.1 => /lib/libselinux.so.1 (0xb7fac000) libc.so.6 => /lib/i686/cmov/libc.so.6 (0xb7e51000) libpthread.so.0 => /lib/tls/i686/cmov/libpthread.so.0 (0xb7e3f000) /lib/ld-linux.so.2 (0xb7fd8000) libattr.so.1 => /lib/libattr.so.1 (0xb7e3b000) libdl.so.2 => /lib/i686/cmov/libdl.so.2 (0xb7e37000) libsepol.so.1 => /lib/libsepol.so.1 (0xb7df6000) It seems I've temporary fixed it with: # touch /etc/ld.so.nohwcap From here: http://saintaardvarkthecarpeted.com/blog/archive/2005/08/_etc_ld_so_nohwcap.html

  Read the article

• Cant kill process on Windows Server 2008!! - Thread in Wait:Executive State

  - by adrian

  I hope someone can help me with our issue we are having. We have a major issue with a process that we can not kill and the only way to get rid of the process is to reboot the machine. I have tried killing it from the normal task manager but no joy. I have tried killing it using the taskkill /F command from a command prompt and no joy. The command reports as sucessful but the process remains. I have tried to start task manager with system rights by calling "psexec -s -i -d taskmgr" and attempting to kill the process but no joy I have tried killing it from Process Explorer but again the process remains. I have tried creating a scheduled task that runs under the SYSTEM name to kill the task but that also does not kill it : schtasks /create /ru system /sc once /st 13:16 /tn test1 /tr "taskkill /F /PID 1576" /it Nothing I do will kill this process. Even logging off and logging back on will not kill this process. Using Process Explorer I notice that there is on stubborn thread that is in the Wait:Executive state. I have tried to kill this thread using Process Explorer but again no joy. We are using Windows Server 2008 R2 64-Bit. The server is brand new and windows is freshly installed. Now heres the thing. We have brought two identical servers from Dell with the same specs and the same OS installed and I can not replicate this issue on the other server. Only on this server, under certain circumstances does this server process hang and can not be restarted! I have also changed the compatability mode by setting it the process to "Windows 2003" but this has not helped. I have noticed in Process Explorer that DEP is turned on but im not sure this has got any bearing on the issue ot not. Please, can someone help??

  Read the article

• How do I change the Dropbox directory on a headless GNU/Linux server?

  - by DrTwox

  I have installed Dropbox 2.0.0 via command line on my home server (Ubuntu Server 12.04) to use for off-site automated backups, but I can't change the directory that the Dropbox daemon keeps synced. I've tried the following: The official docs say to use the desktop application, which is not applicable in my situation. However I installed the desktop app on my desktop machine and changed the default folder location, but I can't find where this change is stored in the ~/.dropbox/ directory so I can make the same change on the server. This page (and several others) recommends a Python script to do the job. Looking at the script, it opens a SQLite database called ~/.dropbox/dropbox.db, which does not exist on my Dropbox install, leading me to believe the script is out-of-date. This forum thread suggests manually inserting the required row in the config.db database, which I did, but it made no difference. I checked the same database file on my desktop machine, and it does not have the dropbox_path key, so I'm presuming the information in that thread is also out of date for version 2.0. I have tried to launch the Dropbox GUI configuration wizard over SSH with X11 forwarding, as suggested in one of the answers, but the binary must detect the absence of a local X11 install and it starts a command line daemon instead, which provides no means to change the option I need. I am currently using a symlink, as suggested as an answer, but this is a kludge. I would like to know the correct way to make the change. How do I change the Dropbox directory on a headless GNU/Linux server? Update: I've ditched Dropbox and started using Copy. Their Linux tools and support is far superior to Dropbox. I leave this question here in case someone, someday, can answer it.

  Read the article

• Dell OMCI: Wacky values for Temperature and etc? (Win7x64)

  - by Yablargo

  Hey All. I am running a Dell Precision R5400 Workstation with dell OMCI installed. I am using it to test polling various data over WMI for our monitoring across the enterprise. I'm getting some weird results. perhaps someone can help point me in the direction of some clarification? Posted is the results of my DCIM\SYSMAN\DCIM_NumericSensor probe for sensor type 2(temp sensor) Microsoft (R) Windows Script Host Version 5.8 Copyright (C) Microsoft Corporation. All rights reserved. ----------------------------------- DCIM_NumericSensor instance ----------------------------------- Accuracy: AccuracyUnits: AdditionalAvailability: Availability: AvailableRequestedStates: BaseUnits: 2 Caption: CommunicationStatus: CreationClassName: DCIM_NumericSensor CurrentReading: -214748365 CurrentState: Unknown Description: DetailedStatus: DeviceID: Root/MainSystemChassis/TemperatureObj ElementName: Temperature Sensor:CPU0 EnabledDefault: 2 EnabledState: 2 EnabledThresholds: ErrorCleared: ErrorDescription: HealthState: 5 Hysteresis: IdentifyingDescriptions: InstallDate: IsLinear: LastErrorCode: LocationIndicator: LowerThresholdCritical: LowerThresholdFatal: LowerThresholdNonCritical: MaxQuiesceTime: MaxReadable: MinReadable: Name: NominalReading: NormalMax: NormalMin: OperatingStatus: OperationalStatus: 2 OtherEnabledState: OtherIdentifyingInfo: OtherSensorTypeDescription: PollingInterval: PossibleStates: Unknown,Normal,Fatal,Lower Non-Critical,Upper Non-Critical,Lower Critical,Upper Critical PowerManagementCapabilities: PowerManagementSupported: PowerOnHours: PrimaryStatus: ProgrammaticAccuracy: RateUnits: 0 RequestedState: 12 Resolution: SensorType: 2 SettableThresholds: Status: StatusDescriptions: StatusInfo: SupportedThresholds: SystemCreationClassName: DCIM_ComputerSystem SystemName: dt:5Q7BKK1 TimeOfLastStateChange: Tolerance: TotalPowerOnHours: TransitioningToState: 12 UnitModifier: 0 UpperThresholdCritical: UpperThresholdFatal: UpperThresholdNonCritical: ValueFormulation: 2 I'm not really sure whats going on, but note the CurrentReading: -214748365. I have reinstalled OMCI a few times, installed the OMCI 7x compatability and same thing I consistently get that error. It almost looks like its a issue between 32/64 bit value or something? Do I have to convert it to a float ? :)

  Read the article

• Shared configuration for Eclipse on Debian server

  - by Joris Meys

  I've manually installed the latest Eclipse on our debian server and wanted to configure it so all users share the same configuration. It turned out less obvious than I thought: I don't seem to be able to install packages for all users. If I run it myself, all configuration data is saved under my own home directory. If I run Eclipse using sudo, everything is saved under the root directory but is not accessible for other users when they run Eclipse. I've been browsing the manual of Eclipse and some forums, but apart from a "yes, you can" I couldn't find any information on how that should be done. The biggest problem is installing plugins for all users to be found. Any help is greatly appreciated. Eclipse : 3.6.1 classic, installed using this procedure. Server uname: GNU/Linux * 2.6.26-2-amd64 Server is accessed using Putty, and Gnome desktop through realVNC. Just mentioning it if that is of any importance. Our sysadmin is on "prolonged leave" (working in Spain and never replaced), so I'm stuck without help here. EDIT : -- I asked this question also on StackOverflow as I wasn't certain this is a genuine server-related question. Please feel free to merge both questions at the appropriate place. --

  Read the article

• How to diagnose and solve an erratic "HDCP Support Required"?

  - by Jom Orgstrom

  I am playing a digital tv broadcast on Windows Media Center for Windows 7. I built this system so it works with HDCP, and in fact I have been able to watch tv and bluray before with this same computer. However, I suddenly started getting an "HDCP Support Required" error from WMC. The entire message is as follows: HDCP Support Required High-bandwidth Digital Content Protection (HDCP) may not be supported by the current video card. Use an HDCP-compliant display, video card, and video driver. Or, connect using an analog connection such as component or VGA. Relevant specs are: CPU: Ivy Bridge Core i7-3770 Motherboard: Asus P8H77-I Memory: 16GB DDR3-1600 Graphics: Radeon HD 7850 (Driver by AMD, version 8.982.0.0 built on 2012/07/27) Display: Acer P243w connected by HDMI Sound: Roland Quad-Capture (It complains even when I use the bundled VIA HD Audio) TV Tuner: I-O Data GV-MC7/HZ3 OS: Windows 7 Professional SP1, Windows Update enabled. All patched and up to date. As you can see, there is nothing weird or old about my setup. I am also not doing anything strange, not doing any overclocking, weird system changes and so on. One thing that does happen from time to time, is that the display goes black for a few seconds (sometimes when watching media contents, sometimes when just using photoshop or Visual Studio). This happened with my previous setup as well, so I'd be inclined to think it is a display or cable issue (apart from the BD drive, these are the only things I kept from my previous setup to this one). But being a digital transfer, as far as I know, these things either work or not. Never erratically or with decreased quality. The thing is that sometimes I can watch the TV, sometimes not. This happens with recorded programs as well, so it's not a per-program thing. Sometimes rebooting helps, sometimes it doesn't. Sometimes unplugging and plugging back the HDMI connector helps, sometimes it doesn't. Sometimes doing so doesn't even turn the screen back on, so I have to reboot. Unfortunately, WMC's error message is quite unhelpful. I'd like to know exactly where the problem is, so I can solve it. I don't want to buy a brand new display just to then find out it was a registry setting that was misconfigured. I've tried looking at the system event viewer, but these errors don't show up at all in there. Other people who have this problem seem to have a setup that is not HDCP compliant, so I turn to you guys here. Anybody knows how to diagnose this problem? Edit: So I got the Cyberlink Blu-ray disc advisor. I ran it and told me everything was okay, except for the Video Connection Type, which showed as "Digital (without HDCP)". I then proceeded to unplug the power cable from the monitor, plugged it in again, ran the tool again, and now it's "Digital (with HDCP)". Needless to say, I can watch my TV and recorded programs on WMP again. I'm guessing that at some point, something may be slightly wrong with the HDCP setup, and Windows decides to reset the entire content protection path (which leads to the screen blanking out). Usually the reset succeeds, but sometimes it doesn't, so Windows defaults to turning HDCP off. There's no way to turn it back on, except by doing a hard reset of the display. I really want to know what the exact error was, so I can fix it. Is it the cable? is it the display? is it the video card? the driver? Also, is there any other way to try and turn HDCP on again without having to hard reset the display? Oh, questions, questions...

  Read the article

• Cannot Install Phusion Passenger 3.0.13 with Nginx 1.2.1

  - by LightBe Corp

  I installed gem Passenger which installed 3.0.13. Then I executed passenger-install-nginx-module which is what the Nginx instructions on http://www.modrails.com said to do. It installs the latest stable version which is 1.2.1 according to the Nginx official wiki page. I said to install Nginx to /usr/local/nginx (which is the default if you go to the nginx wiki website). I get the following errors: Undefined symbols for architecture x86_64: "_pcre_free_study", referenced from: _ngx_pcre_free_studies in ngx_regex.o ld: symbol(s) not found for architecture x86_64 collect2: ld returned 1 exit status make[1]: *** [objs/nginx] Error 1 make: *** [build] Error 2 -------------------------------------------- It looks like something went wrong Please read our Users guide for troubleshooting tips: /Users/server1/.rvm/gems/[email protected]/gems/passenger-3.0.13/doc/Users guide Nginx.html If that doesn't help, please use our support facilities at: http://www.modrails.com/ We'll do our best to help you. I have done searches for several hours trying to find a resolution. I tried the Google Group for Phusion Passenger but did not find anything. I do not know if there is a mismatch in version numbers or not. The documentation says nothing about this error.

  Read the article

• (help help!!!) Easy_install the wrong version of python modules (Mac OS)

  - by user71415

  I installed Python 2.7 in my mac. When typing "python" in terminal, it shows: Ma-Xiaolongs-MacBook-Pro-2:~ MaXiaolong$ python Python 2.7 (r27:82508, Jul 3 2010, 20:17:05) [GCC 4.0.1 (Apple Inc. build 5493)] on darwin Type "help", "copyright", "credits" or "license" for more information. The Python version is correct here. But when I try to easy_install some modules. The system will install the modules with python version 2.6 which are not able be imported to Python 2.7. And of course I can not do the functions I need in my code. Here's an example of easy_install graphy: Ma-Xiaolongs-MacBook-Pro-2:~ MaXiaolong$ easy_install graphy Searching for graphy Reading pypi.python.org/simple/graphy/ Reading http://code.google.com/p/graphy/ Best match: Graphy 1.0.0 Downloading http://pypi.python.org/packages/source/G/Graphy/Graphy- 1.0.0.tar.gz#md5=390b4f9194d81d0590abac90c8b717e0 Processing Graphy-1.0.0.tar.gz Running Graphy-1.0.0/setup.py -q bdist_egg --dist-dir /var/folders/fH/fHwdy4WtHZOBytkg1nOv9E+++TI/-Tmp-/easy_install-cFL53r/Graphy-1.0.0/egg-dist-tmp-YtDCZU warning: no files found matching '.tmpl' under directory 'graphy' warning: no files found matching '.txt' under directory 'graphy' warning: no files found matching '.h' under directory 'graphy' warning: no previously-included files matching '.pyc' found under directory '.' warning: no previously-included files matching '~' found under directory '.' warning: no previously-included files matching '.aux' found under directory '.' zip_safe flag not set; analyzing archive contents... graphy.all_tests: module references file Adding Graphy 1.0.0 to easy-install.pth file Installed /Library/Python/2.6/site-packages/Graphy-1.0.0-py2.6.egg Processing dependencies for graphy Finished processing dependencies for graphy So it installs graphy for python 2.6. Can someone help me with it? I just want to set my default easy_install version as 2.7... Thank you very much!!!!!!

  Read the article

• Self-connecting printers

  - by Martin Cerny

  Hello, I work as an administrator in a small company using XP Professional on all computers and two servers with Win 2003 Server. Recently a very unusual problam occured one of the computers keeps connecting to all the printers on the network it doesn't matter if it's an administrator or Domain User as soon as somebody logs in the commputer connects all the printers. The printers are either installed on local computers or on the server and shared. There is no log-on script connecting the printers, I install them manualy and none of the other computers shows such behaviour. We have a printer which is installed on two computers and both of them share it (I'm moving it to Server from a small PC which shared it up to now, but some computers still use the old connection), meaning this specific computer connects to one of the printer two times and it can't use either of the connections. How to prevent this self-connecting to all printers (none of the other computers has this problem). If I delte them from the "Printers" folder everything works fine untill I reconnect and the Folder is once again full of all the printers we have. I solved the smaller problem, computer is now capable of printing on all of the printers (it seems there have been some registry issues), after cleaning the registry and reinstalling the printer it seems to work just fine. But the second thing prevails, the computer connects to all the printers in the network (when I remove one/multiple it is reconnected right after the next log-in by any user).

  Read the article

• How to fix IE starting when I try to start Opera?

  - by Scott Leis

  I have a problem that started today, where trying to run any of the 3 versions of Opera I have installed causes Internet Explorer to start instead. The Opera versions I have installed are 9.64, 10.10, and 10.63. My OS is Windows Vista with the latest critical/important updates. The behaviour is the same regardless of whether I double-click a shortcut to Opera, double-click on Opera.exe in one of the install directories, or run Opera.exe with the full path from Start-Run. The only work-around I've found is to right-click Opera.exe or a shortcut, and click "Run as administrator". This starts Opera, and it appears to work normally. Opera seems to be the only program so affected. I've checked Firefox and a few other (non-browser) programs, and they work normally. When IE starts instead of Opera, there are always two instances of iexplore.exe started, and they both crash before I can do anything else. IE also crashes if I try to start it from its own shortcut, but I don't know if that only started today, since I hadn't used IE for a few weeks. Does anyone know what might cause this and how to fix it? It's possible my PC has a virus, but BitDefender (for which I have automatic updates enabled) hasn't detected anything.

  Read the article

• Can't open cocoa emacs from terminal using open -a

  - by Shane

  I installed emacs on my macbook air running os x 10.6.5 from this site http://emacsformacosx.com/. I believe this is what used to be called cocoa emacs. I dragged it into my Application folder and it works fine when i run it from there. I want to be able to run it from terminal. After some googling, i tried open -a /Application/Emacs.app foo.txt (foo.txt was and existing file). I got two emacs windows - one with welcome screen and one with foo.txt loaded. I tried a few applications in the /Applications directory and they did not seem to behave like this. I had installed it using my own account (an admin account) so after doing ls -l on /Application I noticed that the owner and group were different from the other entries in this folder. I recursively changed the owner and group to root and wheel, like the others, but this did not help. The only thing that looks funny now is that there that ls -l show a @ character which has something to do with extended attributes but i don't know how to check these. Any suggestions on what to check next? Is using the open command the only to run the program? Can I simulate what it does using a shell script?

  Read the article

• Updating and deleting java (red hat / centos) (new)

  - by JochemTheSchoolKid

  I am a total noob with linux. So please explain clearly if you have a solution for me. I have an VPS and I want to update JAVA. I found a guide on the Java site which says: rpm -e < package_name I searched for the packages: [root@srv1 ~]# rpm -qa | grep java java_cup-0.10k-5.el6.x86_64 java-1.5.0-gcj-1.5.0.0-29.1.el6.x86_64 Than I tried to do the delete command [root@srv1 ~]# rpm -e java-1.5.0-gcj-1.5.0.0-29.1.el6.x86_64 error: Failed dependencies: java-gcj-compat is needed by (installed) java_cup-1:0.10k-5.el6.x86_64 java-gcj-compat >= 1.0.70 is needed by (installed) sinjdoc-0.5-9.1.el6.x86_64 What should I do now? Removing has worked thanks to the answer below Problem two! Now am I installing this package from java [root@srv1 java]# rpm -ivh jre-7u9-linux-i586.rpm Preparing... ########################################### [100%] 1:jre ########################################### [100%] Unpacking JAR files... rt.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/rt.pack jsse.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/jsse.pack charsets.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/charsets.pack localedata.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/ext/localedata.pack plugin.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/plugin.pack javaws.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/javaws.pack deploy.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/deploy.pack Can someone help me again with this?

  Read the article

• Windows is very slow with my new SSD

  - by Maksym H.

  I have a laptop HP probook 4520s with Core i5 M480 @ 2.67Ghz, 4Gb RAM, 640 GB HDD Radeon HD 6370m 1GB video card. It would seem like a good stack for work, right? But My HDD has crashed after everyday walking with laptop about 1 year. After buying my new SSD (Patriot memory - Torqx II 128 Gb SATA II) and installing new Windows 8 from scratch - it was amazing fast. But I had only install windows updates, and I feel that the speed become the same as my old HDD, after install other software for my work, it becomes so slow, so when I use my PC with old lower configuration and it really works better than my awesome laptop... I checked that TRIM and AHCI mode are turned on. So why's that? I asked for help in Patriot Memory support, they suggested to send them ATTO test results, done, sent. Here is the response: "Thank you very much for the attached results. Looking at the results, I can see that your SSD speed is a lot lower than it should be. Can you tell me your system specs?" Until they checked my email, I re-installed Windows 8 to Windows 7 and it was again perfect, but the story repeats it becomes slower and slower after every installing new software. Check out some screenshots.. (sorry for the screenshot with russian TaskManager, I hope you will recognize those parameters accordingly with your english or other lang TaskManager) So the main issue that something everytime loads the disc on 100% and the response time is jumping around 1000-3000 ms. Why am I asking about Windows? Because I tried to install Linux Mint (x86) and It just flies. So great performance independent on how many programs I have installed. Only Windows (any 7 or 8) has this problem. So guys, I appreciate any ideas about how to fix that and may be answers of main question - "why is it so.?" Thanks!

  Read the article

• How do I rename my old Program Files folder?

  - by SteveJ

  I installed a new SSD as my boot drive (C:), installed a fresh version of Windows 7 64-bit, and kept my existing SATA drive in the system (D:). I want to keep using my D: drive for file storage (no sense filling up the SSD with stuff that isn't performance critical) and I haven't formatted the D: drive because there's stuff on there I want to keep. I also want to create a new "D:\Program Files" folder so I can install apps that aren't performance-critical there. So I decided I'd rename the existing "D:\Program Files" from my old Windows install to "D:\Old Program Files" and then create a new "D:\Program Files" directory. Easy, right? I can see "D:\Program Files" just fine in Explorer. I right click, select Rename, and type "Old Program Files." I get the alert that says I need Admin permission to do this, so I press the confirm button with the shield. But the folder still appears as "Program Files" in Explorer. I jump out to the command line, and it appears as "Old Program Files" when I do a dir. I can even do mkdir "Program Files" and when I do a dir they both appear. But in the Explorer GUI, it looks like I have two "Program Files" folders. This will be confusing during app installation because I won't be able to tell which one is which. I've tried poking around in the properties tab of the old folder, but can't find anything that would explain what's causing the issue. How do I rename the old Program Files folder?

  Read the article

• After upgrading to 2008 R2 Enterprise and installing more RAM, Windows can only see 4.00 GB

  - by Tom Crane

  (I have also posted this on technet but I'm running out of ideas) I've upgraded from Windows Server 2008 R2 Standard to Enterprise in order to make use of more RAM. The server previously had 32GB of RAM. The upgrade from Standard to Enterprise, using DISM, seemed to go OK, so I powered down and installed the RAM. This a Dell Poweredge T710, I was taking it from 32GB to 72GB. The BIOS recognised the RAM, although I needed to change from "Advanced ECC" to "Optimizer" mode for it to use all of it. After rebooting, windows can see the RAM but in the system panel will display: Installed memory (RAM): 72.0 GB (4.00 GB usable) In the resource monitor, the remainder of the RAM is showing as reserved for hardware. I've tried various RAM configurations, including reverting it to the same chips and same configuration as before the upgrade, but always just 4.00 GB is showing up as usable. Following some threads on these forums I've gone into msconfig and set the maximum memory "by hand" but that doesn't fix the problem. BIOS doesn't seem to have anything that looks like memory remapping which is another suggestion that has come up. How do I make this RAM available to Windows? It was available before the upgrade, because I could use the full 32GB RAM the server had to start with. A screenshot (this is after reverting to the original RAM configuration) http://screencast.com/t/5FuzevdNb I don't know if it's related, but my remote desktop configuration has also disappeared: screencast.com/t/mYedomeQWS (the bottom half of this dialog should allow me to configure Remote Desktop, it was working before the upgrade but now it isn't).

  Read the article

• Oracle Error ORA-12560 TNS:Protocol Adapter error?

  - by David Basarab

  I am using Oracle Database 10g. Both Servers are Windows 2003. I have an Orcale Database set up on one server. Here is the TNSNames.ora from the server with the database. # tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora # Generated by Oracle configuration tools. ORCL.VIRTUALHOLD.COM = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = databaseServer)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl) ) ) The Environmental Variables on the Server are ORACLE_HOME = C:\oracle\product\10.2.0\db_1 ORACLE_SID = orcl I am trying to connect to it from another box that has Oracle Client installed. Here is the tnsnames.ora installed on the other client server. # tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\client_1\network\admin\tnsnames.ora # Generated by Oracle configuration tools. ORCL = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = databaseServer)(PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = orcl) ) ) ORACLE_HOME = C:\oracle\product\10.2.0\client_1 ORACLE_SID = orcl Locally on the database server I can connect to through sqlplus with no issues. On the client machine I keep getting the error: ORA-12560: TNS:protocol adapter error What am I missing? Does the client TNSNames.ora need to be different?

  Read the article

• Sync desktop Mac environment to laptop

  - by Andrew Vit

  I spend the majority of my time working at my desktop Mac, which I have configured for my web development environment. My spouse has a MacBook for casual use, and I occasionally steal it back when I need to work off-site, or when travelling. The question is how to best synchronize the two so I can switch between them more readily. I've solved a few obvious things by using online services: Email is hosted on IMAP. Working files are in Dropbox. Source code is managed in git. However, the following are things I always miss when jumping on the laptop: Installed Applications (current versions) Installed libraries & utilities (/usr/local) Apache VirtualHosts & other configurations (/etc) Disk image files for VMs My current method is to connect the MacBook via Firewire target mode and rsync the /Users/me home directory, and then cherry-pick the other items I need from Applications, /etc and /usr/local. The problem with this method is that it can be very time consuming due to things like my virtual machine image files, cached emails, etc. How can I make this faster & easier? Can you recommend a solution for configuration management (so I can repeatably install & configure the same software on both), or synchronization (so I can bring the MacBook up to date nightly, over our home network)?

  Read the article

• how to setup a bridge with 2 NICs and few virtual machines

  - by Bond

  Here is my situation. I have a server with 2 NICs. I have installed virtual box and I have created a few Guest Operating Systems on it. I want these Virtual Machines to be using a bridge.NIC2 would be used to setup this bridge and NIC1 would be connected to corporate network.I am not clear with how should I go on doing this. /etc/network/interfaces is the file which I am trying to modify etc. My approach is following 1) Define a configuration file /etc/network/interfaces 2) Create IPTABLES as how NIC1 will forward the packets to Bridge on NIC2 Now comes the problem I do not understand what is the meaning of following lines in the configuration file auto lo iface lo inet loopback # The primary network interface auto eth2 iface eth2 inet manual auto br0 iface br0 inet static address 192.168.1.14 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.10 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 192.168.13.2 dns-search myserver.net bridge_ports eth2 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off So any pointers to what should be the entries of /etc/network/interfaces file. So that I understand which parameter is to be used when and where that would help me.

  Read the article

• How to take screenshots of WPF applications in correct size and content

  - by Thomas W.

  I usually take screenshots of single windows via the built-in key combination Alt+Print. Unfortunately this does not work well for more and more applications - all of them are WPF applications. Usually the screen shots have at least one of the following properties: the screenshot is larger than expected and contains parts of the screen around the actual window the screenshot has the correct size but includes parts of other windows, e.g. the Windows task bar. Of course the task bar might be in front of the window, but taking screen shots of "normal" programs works fine. How do I take screenshots of WPF application which are correct in size and content? I'd like to avoid the extra effort of checking all the screenshots for correctness, reproducing the situation, taking them again in case of issues or repairing/faking them manually in any pixel manipulation program (e.g. Paint.NET). I observe this on Windows 7 x64 SP 1, all official updates installed, but it might apply to other Windows versions as well (not tested yet). .NET 4.5 is installed. The application itself might only need the built-in .NET 3.5.1. It's reproducible on a virtual machine with the same settings. Examples: Screenshot of an application running in maximized mode. The screen shot includes parts of the task bar. Screenshot of a progress dialog which is behind the task bar. The screenshot also includes the task bar, while it doesn't for non WPF applications.

  Read the article

< Previous Page | 346 347 348 349 350 351 352 353 354 355 356 357  | Next Page >