Search Results

Search found 9748 results on 390 pages for 'virt manager'.

Page 350/390 | < Previous Page | 346 347 348 349 350 351 352 353 354 355 356 357  | Next Page >

• Did I lose my RAID again?

  - by BarsMonster

  Hi! A little history: 2 years ago I was really excited to find out that mdadm is so powerful that it even can reshape arrays, so you can start with a smaller array and then grow it as you need. I've bought 3x1Tb drives and made a RAID-5. It was fine for a year. Then I bought 2x more, and tried to reshape to RAID-6 out of 5 drives, and due to some mess with superblock versions, lost all content. Had to rebuild it from scratch, but 2Tb of data were gone. Yesterday I bought 2 more drives, and this time I had everything: properly built array, UPS. I've disabled write intent map, added 2 new drives as spares and run a command to grow array to 7-disks. It started working, but speed was ridiculously slow, ~100kb/sec. After processing first 37Mb at such an amazing speed, one of old HDDs fails. I properly shutdown the PC and disconnected the failed drive. After bootup it appeared that it recreated the intent map as it was still in mdadm config, so I removed it from config and rebooted again. Now all I see is that all mdadm processes deadlock, and don't do anything. PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1937 root 20 0 12992 608 444 D 0 0.1 0:00.00 mdadm 2283 root 20 0 12992 852 704 D 0 0.1 0:00.01 mdadm 2287 root 20 0 0 0 0 D 0 0.0 0:00.01 md0_reshape 2288 root 18 -2 12992 820 676 D 0 0.1 0:00.01 mdadm And all I see in mdstat is: $ cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid6 sdb1[1] sdg1[4] sdf1[7] sde1[6] sdd1[0] sdc1[5] 2929683456 blocks super 1.2 level 6, 1024k chunk, algorithm 2 [7/6] [UU_UUUU] [>....................] reshape = 0.0% (37888/976561152) finish=567604147.2min speed=0K/sec I've already tried mdadm 2.6.7, 3.1.4 and 3.2 - nothing helps. Did I lose my data again? Any suggestions on how can I make this work? OS is Ubuntu Server 10.04.2. PS. Needless to say, the data is inaccessible - I cannot mount /dev/md0 to save the most valuable data. You can see my disappointment - the very specific thing I was excited about failed twice taking 5Tb of my data with it. Update: It appears there is some nice info in kern.log: 21:38:48 ...: [ 166.522055] raid5: reshape will continue 21:38:48 ...: [ 166.522085] raid5: device sdb1 operational as raid disk 1 21:38:48 ...: [ 166.522091] raid5: device sdg1 operational as raid disk 4 21:38:48 ...: [ 166.522097] raid5: device sdf1 operational as raid disk 5 21:38:48 ...: [ 166.522102] raid5: device sde1 operational as raid disk 6 21:38:48 ...: [ 166.522107] raid5: device sdd1 operational as raid disk 0 21:38:48 ...: [ 166.522111] raid5: device sdc1 operational as raid disk 3 21:38:48 ...: [ 166.523942] raid5: allocated 7438kB for md0 21:38:48 ...: [ 166.524041] 1: w=1 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524050] 4: w=2 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524056] 5: w=3 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524062] 6: w=4 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524068] 0: w=5 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524073] 3: w=6 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524079] raid5: raid level 6 set md0 active with 6 out of 7 devices, algorithm 2 21:38:48 ...: [ 166.524519] RAID5 conf printout: 21:38:48 ...: [ 166.524523] --- rd:7 wd:6 21:38:48 ...: [ 166.524528] disk 0, o:1, dev:sdd1 21:38:48 ...: [ 166.524532] disk 1, o:1, dev:sdb1 21:38:48 ...: [ 166.524537] disk 3, o:1, dev:sdc1 21:38:48 ...: [ 166.524541] disk 4, o:1, dev:sdg1 21:38:48 ...: [ 166.524545] disk 5, o:1, dev:sdf1 21:38:48 ...: [ 166.524550] disk 6, o:1, dev:sde1 21:38:48 ...: [ 166.524553] ...ok start reshape thread 21:38:48 ...: [ 166.524727] md0: detected capacity change from 0 to 2999995858944 21:38:48 ...: [ 166.524735] md: reshape of RAID array md0 21:38:48 ...: [ 166.524740] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. 21:38:48 ...: [ 166.524745] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for reshape. 21:38:48 ...: [ 166.524756] md: using 128k window, over a total of 976561152 blocks. 21:39:05 ...: [ 166.525013] md0: 21:42:04 ...: [ 362.520063] INFO: task mdadm:1937 blocked for more than 120 seconds. 21:42:04 ...: [ 362.520068] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:42:04 ...: [ 362.520073] mdadm D 00000000ffffffff 0 1937 1 0x00000000 21:42:04 ...: [ 362.520083] ffff88002ef4f5d8 0000000000000082 0000000000015bc0 0000000000015bc0 21:42:04 ...: [ 362.520092] ffff88002eb5b198 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5ade0 21:42:04 ...: [ 362.520100] 0000000000015bc0 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5b198 21:42:04 ...: [ 362.520107] Call Trace: 21:42:04 ...: [ 362.520133] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:42:04 ...: [ 362.520148] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:42:04 ...: [ 362.520159] [<ffffffffa0228413>] make_request+0x243/0x4b0 [raid456] 21:42:04 ...: [ 362.520169] [<ffffffffa0221a90>] ? release_stripe+0x50/0x70 [raid456] 21:42:04 ...: [ 362.520179] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:42:04 ...: [ 362.520188] [<ffffffff81414df0>] md_make_request+0xc0/0x130 21:42:04 ...: [ 362.520194] [<ffffffff81414df0>] ? md_make_request+0xc0/0x130 21:42:04 ...: [ 362.520205] [<ffffffff8129f8c1>] generic_make_request+0x1b1/0x4f0 21:42:04 ...: [ 362.520214] [<ffffffff810f6515>] ? mempool_alloc_slab+0x15/0x20 21:42:04 ...: [ 362.520222] [<ffffffff8116c2ec>] ? alloc_buffer_head+0x1c/0x60 21:42:04 ...: [ 362.520230] [<ffffffff8129fc80>] submit_bio+0x80/0x110 21:42:04 ...: [ 362.520236] [<ffffffff8116c849>] submit_bh+0xf9/0x140 21:42:04 ...: [ 362.520244] [<ffffffff8116f124>] block_read_full_page+0x274/0x3b0 21:42:04 ...: [ 362.520251] [<ffffffff81172c90>] ? blkdev_get_block+0x0/0x70 21:42:04 ...: [ 362.520258] [<ffffffff8110d875>] ? __inc_zone_page_state+0x35/0x40 21:42:04 ...: [ 362.520265] [<ffffffff810f46d8>] ? add_to_page_cache_locked+0xe8/0x160 21:42:04 ...: [ 362.520272] [<ffffffff81173d78>] blkdev_readpage+0x18/0x20 21:42:04 ...: [ 362.520279] [<ffffffff810f484b>] __read_cache_page+0x7b/0xe0 21:42:04 ...: [ 362.520285] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:42:04 ...: [ 362.520290] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:42:04 ...: [ 362.520297] [<ffffffff810f57dc>] do_read_cache_page+0x3c/0x120 21:42:04 ...: [ 362.520304] [<ffffffff810f5909>] read_cache_page_async+0x19/0x20 21:42:04 ...: [ 362.520310] [<ffffffff810f591e>] read_cache_page+0xe/0x20 21:42:04 ...: [ 362.520317] [<ffffffff811a6cb0>] read_dev_sector+0x30/0xa0 21:42:04 ...: [ 362.520324] [<ffffffff811a7fcd>] amiga_partition+0x6d/0x460 21:42:04 ...: [ 362.520331] [<ffffffff811a7938>] check_partition+0x138/0x190 21:42:04 ...: [ 362.520338] [<ffffffff811a7a7a>] rescan_partitions+0xea/0x2f0 21:42:04 ...: [ 362.520344] [<ffffffff811744c7>] __blkdev_get+0x267/0x3d0 21:42:04 ...: [ 362.520350] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:42:04 ...: [ 362.520356] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:42:04 ...: [ 362.520362] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:42:04 ...: [ 362.520369] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:42:04 ...: [ 362.520377] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:42:04 ...: [ 362.520385] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:42:04 ...: [ 362.520391] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:42:04 ...: [ 362.520398] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:42:04 ...: [ 362.520406] [<ffffffff811134a8>] ? unmap_vmas+0x178/0x310 21:42:04 ...: [ 362.520414] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:42:04 ...: [ 362.520421] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:42:04 ...: [ 362.520428] [<ffffffff811418b0>] sys_open+0x20/0x30 21:42:04 ...: [ 362.520437] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:42:04 ...: [ 362.520446] INFO: task mdadm:2283 blocked for more than 120 seconds. 21:42:04 ...: [ 362.520450] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:42:04 ...: [ 362.520454] mdadm D 0000000000000000 0 2283 2212 0x00000000 21:42:04 ...: [ 362.520462] ffff88002cca7d98 0000000000000086 0000000000015bc0 0000000000015bc0 21:42:04 ...: [ 362.520470] ffff88002ededf78 ffff88002cca7fd8 0000000000015bc0 ffff88002ededbc0 21:42:04 ...: [ 362.520478] 0000000000015bc0 ffff88002cca7fd8 0000000000015bc0 ffff88002ededf78 21:42:04 ...: [ 362.520485] Call Trace: 21:42:04 ...: [ 362.520495] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:42:04 ...: [ 362.520502] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:42:04 ...: [ 362.520508] [<ffffffff8117404d>] __blkdev_put+0x3d/0x190 21:42:04 ...: [ 362.520514] [<ffffffff811741b0>] blkdev_put+0x10/0x20 21:42:04 ...: [ 362.520520] [<ffffffff811741f3>] blkdev_close+0x33/0x60 21:42:04 ...: [ 362.520527] [<ffffffff81145375>] __fput+0xf5/0x210 21:42:04 ...: [ 362.520534] [<ffffffff811454b5>] fput+0x25/0x30 21:42:04 ...: [ 362.520540] [<ffffffff811415ad>] filp_close+0x5d/0x90 21:42:04 ...: [ 362.520546] [<ffffffff81141697>] sys_close+0xb7/0x120 21:42:04 ...: [ 362.520553] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:42:04 ...: [ 362.520559] INFO: task md0_reshape:2287 blocked for more than 120 seconds. 21:42:04 ...: [ 362.520563] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:42:04 ...: [ 362.520567] md0_reshape D ffff88003aee96f0 0 2287 2 0x00000000 21:42:04 ...: [ 362.520575] ffff88003cf05a70 0000000000000046 0000000000015bc0 0000000000015bc0 21:42:04 ...: [ 362.520582] ffff88003aee9aa8 ffff88003cf05fd8 0000000000015bc0 ffff88003aee96f0 21:42:04 ...: [ 362.520590] 0000000000015bc0 ffff88003cf05fd8 0000000000015bc0 ffff88003aee9aa8 21:42:04 ...: [ 362.520597] Call Trace: 21:42:04 ...: [ 362.520608] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:42:04 ...: [ 362.520616] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:42:04 ...: [ 362.520626] [<ffffffffa0226f80>] reshape_request+0x4c0/0x9a0 [raid456] 21:42:04 ...: [ 362.520634] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:42:04 ...: [ 362.520644] [<ffffffffa022777a>] sync_request+0x31a/0x3a0 [raid456] 21:42:04 ...: [ 362.520651] [<ffffffff81052713>] ? __wake_up+0x53/0x70 21:42:04 ...: [ 362.520658] [<ffffffff814156b1>] md_do_sync+0x621/0xbb0 21:42:04 ...: [ 362.520668] [<ffffffff810387b9>] ? default_spin_lock_flags+0x9/0x10 21:42:04 ...: [ 362.520675] [<ffffffff8141640c>] md_thread+0x5c/0x130 21:42:04 ...: [ 362.520681] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:42:04 ...: [ 362.520688] [<ffffffff814163b0>] ? md_thread+0x0/0x130 21:42:04 ...: [ 362.520694] [<ffffffff81084416>] kthread+0x96/0xa0 21:42:04 ...: [ 362.520701] [<ffffffff810131ea>] child_rip+0xa/0x20 21:42:04 ...: [ 362.520707] [<ffffffff81084380>] ? kthread+0x0/0xa0 21:42:04 ...: [ 362.520713] [<ffffffff810131e0>] ? child_rip+0x0/0x20 21:42:04 ...: [ 362.520718] INFO: task mdadm:2288 blocked for more than 120 seconds. 21:42:04 ...: [ 362.520721] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:42:04 ...: [ 362.520725] mdadm D 0000000000000000 0 2288 1 0x00000000 21:42:04 ...: [ 362.520733] ffff88002cca9c18 0000000000000086 0000000000015bc0 0000000000015bc0 21:42:04 ...: [ 362.520741] ffff88003aee83b8 ffff88002cca9fd8 0000000000015bc0 ffff88003aee8000 21:42:04 ...: [ 362.520748] 0000000000015bc0 ffff88002cca9fd8 0000000000015bc0 ffff88003aee83b8 21:42:04 ...: [ 362.520755] Call Trace: 21:42:04 ...: [ 362.520763] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:42:04 ...: [ 362.520771] [<ffffffff812a6d50>] ? exact_match+0x0/0x10 21:42:04 ...: [ 362.520777] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:42:04 ...: [ 362.520783] [<ffffffff811742c8>] __blkdev_get+0x68/0x3d0 21:42:04 ...: [ 362.520790] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:42:04 ...: [ 362.520795] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:42:04 ...: [ 362.520801] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:42:04 ...: [ 362.520808] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:42:04 ...: [ 362.520815] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:42:04 ...: [ 362.520821] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:42:04 ...: [ 362.520828] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:42:04 ...: [ 362.520834] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:42:04 ...: [ 362.520841] [<ffffffff810ff0e1>] ? lru_cache_add_lru+0x21/0x40 21:42:04 ...: [ 362.520848] [<ffffffff8111109c>] ? do_anonymous_page+0x11c/0x330 21:42:04 ...: [ 362.520855] [<ffffffff81115d5f>] ? handle_mm_fault+0x31f/0x3c0 21:42:04 ...: [ 362.520862] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:42:04 ...: [ 362.520868] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:42:04 ...: [ 362.520874] [<ffffffff811418b0>] sys_open+0x20/0x30 21:42:04 ...: [ 362.520882] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:44:04 ...: [ 482.520065] INFO: task mdadm:1937 blocked for more than 120 seconds. 21:44:04 ...: [ 482.520071] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:44:04 ...: [ 482.520077] mdadm D 00000000ffffffff 0 1937 1 0x00000000 21:44:04 ...: [ 482.520087] ffff88002ef4f5d8 0000000000000082 0000000000015bc0 0000000000015bc0 21:44:04 ...: [ 482.520096] ffff88002eb5b198 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5ade0 21:44:04 ...: [ 482.520104] 0000000000015bc0 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5b198 21:44:04 ...: [ 482.520112] Call Trace: 21:44:04 ...: [ 482.520139] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:44:04 ...: [ 482.520154] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:44:04 ...: [ 482.520165] [<ffffffffa0228413>] make_request+0x243/0x4b0 [raid456] 21:44:04 ...: [ 482.520175] [<ffffffffa0221a90>] ? release_stripe+0x50/0x70 [raid456] 21:44:04 ...: [ 482.520185] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:44:04 ...: [ 482.520194] [<ffffffff81414df0>] md_make_request+0xc0/0x130 21:44:04 ...: [ 482.520201] [<ffffffff81414df0>] ? md_make_request+0xc0/0x130 21:44:04 ...: [ 482.520212] [<ffffffff8129f8c1>] generic_make_request+0x1b1/0x4f0 21:44:04 ...: [ 482.520221] [<ffffffff810f6515>] ? mempool_alloc_slab+0x15/0x20 21:44:04 ...: [ 482.520229] [<ffffffff8116c2ec>] ? alloc_buffer_head+0x1c/0x60 21:44:04 ...: [ 482.520237] [<ffffffff8129fc80>] submit_bio+0x80/0x110 21:44:04 ...: [ 482.520244] [<ffffffff8116c849>] submit_bh+0xf9/0x140 21:44:04 ...: [ 482.520252] [<ffffffff8116f124>] block_read_full_page+0x274/0x3b0 21:44:04 ...: [ 482.520258] [<ffffffff81172c90>] ? blkdev_get_block+0x0/0x70 21:44:04 ...: [ 482.520266] [<ffffffff8110d875>] ? __inc_zone_page_state+0x35/0x40 21:44:04 ...: [ 482.520273] [<ffffffff810f46d8>] ? add_to_page_cache_locked+0xe8/0x160 21:44:04 ...: [ 482.520280] [<ffffffff81173d78>] blkdev_readpage+0x18/0x20 21:44:04 ...: [ 482.520286] [<ffffffff810f484b>] __read_cache_page+0x7b/0xe0 21:44:04 ...: [ 482.520293] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:44:04 ...: [ 482.520299] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:44:04 ...: [ 482.520306] [<ffffffff810f57dc>] do_read_cache_page+0x3c/0x120 21:44:04 ...: [ 482.520313] [<ffffffff810f5909>] read_cache_page_async+0x19/0x20 21:44:04 ...: [ 482.520319] [<ffffffff810f591e>] read_cache_page+0xe/0x20 21:44:04 ...: [ 482.520327] [<ffffffff811a6cb0>] read_dev_sector+0x30/0xa0 21:44:04 ...: [ 482.520334] [<ffffffff811a7fcd>] amiga_partition+0x6d/0x460 21:44:04 ...: [ 482.520341] [<ffffffff811a7938>] check_partition+0x138/0x190 21:44:04 ...: [ 482.520348] [<ffffffff811a7a7a>] rescan_partitions+0xea/0x2f0 21:44:04 ...: [ 482.520355] [<ffffffff811744c7>] __blkdev_get+0x267/0x3d0 21:44:04 ...: [ 482.520361] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:44:04 ...: [ 482.520367] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:44:04 ...: [ 482.520373] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:44:04 ...: [ 482.520380] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:44:04 ...: [ 482.520388] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:44:04 ...: [ 482.520396] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:44:04 ...: [ 482.520403] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:44:04 ...: [ 482.520410] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:44:04 ...: [ 482.520417] [<ffffffff811134a8>] ? unmap_vmas+0x178/0x310 21:44:04 ...: [ 482.520426] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:44:04 ...: [ 482.520432] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:44:04 ...: [ 482.520438] [<ffffffff811418b0>] sys_open+0x20/0x30 21:44:04 ...: [ 482.520447] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:44:04 ...: [ 482.520458] INFO: task mdadm:2283 blocked for more than 120 seconds. 21:44:04 ...: [ 482.520462] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:44:04 ...: [ 482.520467] mdadm D 0000000000000000 0 2283 2212 0x00000000 21:44:04 ...: [ 482.520475] ffff88002cca7d98 0000000000000086 0000000000015bc0 0000000000015bc0 21:44:04 ...: [ 482.520483] ffff88002ededf78 ffff88002cca7fd8 0000000000015bc0 ffff88002ededbc0 21:44:04 ...: [ 482.520490] 0000000000015bc0 ffff88002cca7fd8 0000000000015bc0 ffff88002ededf78 21:44:04 ...: [ 482.520498] Call Trace: 21:44:04 ...: [ 482.520508] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:44:04 ...: [ 482.520515] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:44:04 ...: [ 482.520521] [<ffffffff8117404d>] __blkdev_put+0x3d/0x190 21:44:04 ...: [ 482.520527] [<ffffffff811741b0>] blkdev_put+0x10/0x20 21:44:04 ...: [ 482.520533] [<ffffffff811741f3>] blkdev_close+0x33/0x60 21:44:04 ...: [ 482.520541] [<ffffffff81145375>] __fput+0xf5/0x210 21:44:04 ...: [ 482.520547] [<ffffffff811454b5>] fput+0x25/0x30 21:44:04 ...: [ 482.520554] [<ffffffff811415ad>] filp_close+0x5d/0x90 21:44:04 ...: [ 482.520560] [<ffffffff81141697>] sys_close+0xb7/0x120 21:44:04 ...: [ 482.520568] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:44:04 ...: [ 482.520574] INFO: task md0_reshape:2287 blocked for more than 120 seconds. 21:44:04 ...: [ 482.520578] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:44:04 ...: [ 482.520582] md0_reshape D ffff88003aee96f0 0 2287 2 0x00000000 21:44:04 ...: [ 482.520590] ffff88003cf05a70 0000000000000046 0000000000015bc0 0000000000015bc0 21:44:04 ...: [ 482.520597] ffff88003aee9aa8 ffff88003cf05fd8 0000000000015bc0 ffff88003aee96f0 21:44:04 ...: [ 482.520605] 0000000000015bc0 ffff88003cf05fd8 0000000000015bc0 ffff88003aee9aa8 21:44:04 ...: [ 482.520612] Call Trace: 21:44:04 ...: [ 482.520623] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:44:04 ...: [ 482.520633] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:44:04 ...: [ 482.520643] [<ffffffffa0226f80>] reshape_request+0x4c0/0x9a0 [raid456] 21:44:04 ...: [ 482.520651] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:44:04 ...: [ 482.520661] [<ffffffffa022777a>] sync_request+0x31a/0x3a0 [raid456] 21:44:04 ...: [ 482.520668] [<ffffffff81052713>] ? __wake_up+0x53/0x70 21:44:04 ...: [ 482.520675] [<ffffffff814156b1>] md_do_sync+0x621/0xbb0 21:44:04 ...: [ 482.520685] [<ffffffff810387b9>] ? default_spin_lock_flags+0x9/0x10 21:44:04 ...: [ 482.520692] [<ffffffff8141640c>] md_thread+0x5c/0x130 21:44:04 ...: [ 482.520699] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:44:04 ...: [ 482.520705] [<ffffffff814163b0>] ? md_thread+0x0/0x130 21:44:04 ...: [ 482.520711] [<ffffffff81084416>] kthread+0x96/0xa0 21:44:04 ...: [ 482.520718] [<ffffffff810131ea>] child_rip+0xa/0x20 21:44:04 ...: [ 482.520725] [<ffffffff81084380>] ? kthread+0x0/0xa0 21:44:04 ...: [ 482.520730] [<ffffffff810131e0>] ? child_rip+0x0/0x20 21:44:04 ...: [ 482.520735] INFO: task mdadm:2288 blocked for more than 120 seconds. 21:44:04 ...: [ 482.520739] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:44:04 ...: [ 482.520743] mdadm D 0000000000000000 0 2288 1 0x00000000 21:44:04 ...: [ 482.520751] ffff88002cca9c18 0000000000000086 0000000000015bc0 0000000000015bc0 21:44:04 ...: [ 482.520759] ffff88003aee83b8 ffff88002cca9fd8 0000000000015bc0 ffff88003aee8000 21:44:04 ...: [ 482.520767] 0000000000015bc0 ffff88002cca9fd8 0000000000015bc0 ffff88003aee83b8 21:44:04 ...: [ 482.520774] Call Trace: 21:44:04 ...: [ 482.520782] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:44:04 ...: [ 482.520790] [<ffffffff812a6d50>] ? exact_match+0x0/0x10 21:44:04 ...: [ 482.520797] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:44:04 ...: [ 482.520804] [<ffffffff811742c8>] __blkdev_get+0x68/0x3d0 21:44:04 ...: [ 482.520810] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:44:04 ...: [ 482.520816] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:44:04 ...: [ 482.520822] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:44:04 ...: [ 482.520829] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:44:04 ...: [ 482.520837] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:44:04 ...: [ 482.520843] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:44:04 ...: [ 482.520850] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:44:04 ...: [ 482.520857] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:44:04 ...: [ 482.520864] [<ffffffff810ff0e1>] ? lru_cache_add_lru+0x21/0x40 21:44:04 ...: [ 482.520871] [<ffffffff8111109c>] ? do_anonymous_page+0x11c/0x330 21:44:04 ...: [ 482.520878] [<ffffffff81115d5f>] ? handle_mm_fault+0x31f/0x3c0 21:44:04 ...: [ 482.520885] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:44:04 ...: [ 482.520891] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:44:04 ...: [ 482.520897] [<ffffffff811418b0>] sys_open+0x20/0x30 21:44:04 ...: [ 482.520905] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:46:04 ...: [ 602.520053] INFO: task mdadm:1937 blocked for more than 120 seconds. 21:46:04 ...: [ 602.520059] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:46:04 ...: [ 602.520065] mdadm D 00000000ffffffff 0 1937 1 0x00000000 21:46:04 ...: [ 602.520075] ffff88002ef4f5d8 0000000000000082 0000000000015bc0 0000000000015bc0 21:46:04 ...: [ 602.520084] ffff88002eb5b198 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5ade0 21:46:04 ...: [ 602.520091] 0000000000015bc0 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5b198 21:46:04 ...: [ 602.520099] Call Trace: 21:46:04 ...: [ 602.520127] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:46:04 ...: [ 602.520142] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:46:04 ...: [ 602.520153] [<ffffffffa0228413>] make_request+0x243/0x4b0 [raid456] 21:46:04 ...: [ 602.520162] [<ffffffffa0221a90>] ? release_stripe+0x50/0x70 [raid456] 21:46:04 ...: [ 602.520171] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:46:04 ...: [ 602.520180] [<ffffffff81414df0>] md_make_request+0xc0/0x130 21:46:04 ...: [ 602.520187] [<ffffffff81414df0>] ? md_make_request+0xc0/0x130 21:46:04 ...: [ 602.520197] [<ffffffff8129f8c1>] generic_make_request+0x1b1/0x4f0 21:46:04 ...: [ 602.520206] [<ffffffff810f6515>] ? mempool_alloc_slab+0x15/0x20 21:46:04 ...: [ 602.520215] [<ffffffff8116c2ec>] ? alloc_buffer_head+0x1c/0x60 21:46:04 ...: [ 602.520222] [<ffffffff8129fc80>] submit_bio+0x80/0x110 21:46:04 ...: [ 602.520229] [<ffffffff8116c849>] submit_bh+0xf9/0x140 21:46:04 ...: [ 602.520237] [<ffffffff8116f124>] block_read_full_page+0x274/0x3b0 21:46:04 ...: [ 602.520244] [<ffffffff81172c90>] ? blkdev_get_block+0x0/0x70 21:46:04 ...: [ 602.520252] [<ffffffff8110d875>] ? __inc_zone_page_state+0x35/0x40 21:46:04 ...: [ 602.520259] [<ffffffff810f46d8>] ? add_to_page_cache_locked+0xe8/0x160 21:46:04 ...: [ 602.520266] [<ffffffff81173d78>] blkdev_readpage+0x18/0x20 21:46:04 ...: [ 602.520273] [<ffffffff810f484b>] __read_cache_page+0x7b/0xe0 21:46:04 ...: [ 602.520279] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:46:04 ...: [ 602.520285] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:46:04 ...: [ 602.520292] [<ffffffff810f57dc>] do_read_cache_page+0x3c/0x120 21:46:04 ...: [ 602.520300] [<ffffffff810f5909>] read_cache_page_async+0x19/0x20 21:46:04 ...: [ 602.520306] [<ffffffff810f591e>] read_cache_page+0xe/0x20 21:46:04 ...: [ 602.520314] [<ffffffff811a6cb0>] read_dev_sector+0x30/0xa0 21:46:04 ...: [ 602.520321] [<ffffffff811a7fcd>] amiga_partition+0x6d/0x460 21:46:04 ...: [ 602.520328] [<ffffffff811a7938>] check_partition+0x138/0x190 21:46:04 ...: [ 602.520335] [<ffffffff811a7a7a>] rescan_partitions+0xea/0x2f0 21:46:04 ...: [ 602.520342] [<ffffffff811744c7>] __blkdev_get+0x267/0x3d0 21:46:04 ...: [ 602.520348] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:46:04 ...: [ 602.520354] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:46:04 ...: [ 602.520359] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:46:04 ...: [ 602.520367] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:46:04 ...: [ 602.520375] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:46:04 ...: [ 602.520383] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:46:04 ...: [ 602.520390] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:46:04 ...: [ 602.520397] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:46:04 ...: [ 602.520404] [<ffffffff811134a8>] ? unmap_vmas+0x178/0x310 21:46:04 ...: [ 602.520413] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:46:04 ...: [ 602.520419] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:46:04 ...: [ 602.520425] [<ffffffff811418b0>] sys_open+0x20/0x30 21:46:04 ...: [ 602.520434] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:46:04 ...: [ 602.520443] INFO: task mdadm:2283 blocked for more than 120 seconds. 21:46:04 ...: [ 602.520447] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:46:04 ...: [ 602.520451] mdadm D 0000000000000000 0 2283 2212 0x00000000 21:46:04 ...: [ 602.520460] ffff88002cca7d98 0000000000000086 0000000000015bc0 0000000000015bc0 21:46:04 ...: [ 602.520468] ffff88002ededf78 ffff88002cca7fd8 0000000000015bc0 ffff88002ededbc0 21:46:04 ...: [ 602.520475] 0000000000015bc0 ffff88002cca7fd8 0000000000015bc0 ffff88002ededf78 21:46:04 ...: [ 602.520483] Call Trace: 21:46:04 ...: [ 602.520492] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:46:04 ...: [ 602.520500] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:46:04 ...: [ 602.520506] [<ffffffff8117404d>] __blkdev_put+0x3d/0x190 21:46:04 ...: [ 602.520512] [<ffffffff811741b0>] blkdev_put+0x10/0x20 21:46:04 ...: [ 602.520518] [<ffffffff811741f3>] blkdev_close+0x33/0x60 21:46:04 ...: [ 602.520526] [<ffffffff81145375>] __fput+0xf5/0x210 21:46:04 ...: [ 602.520533] [<ffffffff811454b5>] fput+0x25/0x30 21:46:04 ...: [ 602.520539] [<ffffffff811415ad>] filp_close+0x5d/0x90 21:46:04 ...: [ 602.520545] [<ffffffff81141697>] sys_close+0xb7/0x120 21:46:04 ...: [ 602.520552] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b

  Read the article

• Oracle BI Applications for Industry Sectors

  - by Mike.Hallett(at)Oracle-BI&EPM

  Normal 0 false false false EN-GB X-NONE X-NONE Oracle BI Applications already provide pre-built line-of-business analytic applications to over 4,000 customers: these expose the data otherwise locked inside ERP and CRM applications, giving the business user the analytics they need, and a greater ability to self-service ad-hoc queries. Now you can also take advantage of the pre-built Oracle BI Applications approach for industry sector specific analytics to streamline your client’s operations, offer better services, and increase profit margins. Find out more at http://www.oracle.com/us/solutions/business-analytics/analytic-applications/industry/overview/index.html. Retail Education Oracle Retail Merchandising Analytics Oracle Student Information Analytics Oracle Retail Customer Analytics Public Sector Financial Services Oracle Tax Analytics Oracle Financial Analytics Manufacturing Health Care Oracle Manufacturing Analytics Oracle Enterprise Healthcare Analytics Asset Intensive Oracle Clinical Development Analytics Oracle Enterprise Asset Management Analytics Oracle Operating Room Analytics Related Links Health Sciences Analytic Applications for Your Business Role Oracle Health Sciences Clinical Development Analytics Analytic Applications for Your Product Line Oracle Argus Analytics Oracle Business Intelligence Tools and Technology Communication Oracle Exalytics In-Memory Machine "The adoption of Oracle Financial Services Analytic Applications is of great significance to the bank's transition to more rigorous and risk-averse management practices."Yang Changxue, Project Manager Oracle Communications Data Model /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} table.MsoTableGrid {mso-style-name:"Table Grid"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-priority:59; mso-style-unhide:no; border:solid windowtext 1.0pt; mso-border-alt:solid windowtext .5pt; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-border-insideh:.5pt solid windowtext; mso-border-insidev:.5pt solid windowtext; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

  Read the article

• Security and the Mobile Workforce

  - by tobyehatch

  Now that many organizations are moving to the BYOD philosophy (bring your own devices), security for phones and tablets accessing company sensitive information is of paramount importance. I had the pleasure to interview Brian MacDonald, Principal Product Manager for Oracle Business Intelligence (BI) Mobile Products, about this subject, and he shared some wonderful insight about how the Oracle Mobile Security Tool Kit is addressing mobile security and doing some pretty cool things.  With the rapid proliferation of phones and tablets, there is a perception that mobile devices are a security threat to corporate IT, that mobile operating systems are not secure, and that there are simply too many ways to inadvertently provide access to critical analytic data outside the firewall. Every day, I see employees working on mobile devices at the airport, while waiting for their airplanes, and using public WIFI connections at coffee houses and in restaurants. These methods are not typically secure ways to access confidential company data. I asked Brian to explain why. “The native controls for mobile devices and applications are indeed insufficiently secure for corporate deployments of Business Intelligence and most certainly for businesses where data is extremely critical - such as financial services or defense - although it really applies across the board. The traditional approach for accessing data from outside a firewall is using a VPN connection which is not a viable solution for mobile. The problem is that once you open up a VPN connection on your phone or tablet, you are creating an opening for the whole device, for all the software and installed applications. Often the VPN connection by itself provides insufficient encryption – if any – which means that data can be potentially intercepted.” For this reason, most organizations that deploy Business Intelligence data via mobile devices will only do so with some additional level of control. So, how has the industry responded? What are companies doing to address this very real threat? Brian explained that “Mobile Device Management (MDM) and Mobile Application Management (MAM) software vendors have rapidly created solutions for mobile devices that provide a vast array of services for controlling, managing and establishing enterprise mobile usage policies. On the device front, vendors now support full levels of encryption behind the firewall, encrypted local data storage, credential management such as federated single-sign-on as well as remote wipe, geo-fencing and other risk reducing features (should a device be lost or stolen). More importantly, these software vendors have created methods for providing these capabilities on a per application basis, allowing for complete isolation of the application from the mobile operating system. Finally, there are tools which allow the applications themselves to be distributed through enterprise application stores allowing IT organizations to manage who has access to the apps, when updates to the applications will happen, and revoke access after an employee leaves. So even though an employee may be using a personal device, access to company data can be controlled while on or near the company premises. So do the Oracle BI mobile products integrate with the MDM and MAM vendors? Brian explained that our customers use a wide variety of mobile security vendors and may even have more than one in-house. Therefore, Oracle is ensuring that users have a choice and a mechanism for linking together Oracle’s BI offering with their chosen vendor’s secure technology. The Oracle BI Mobile Security Toolkit, which is a version of the Oracle BI Mobile HD application, delivered through the Oracle Technology Network (OTN) in its component parts, helps Oracle users to build their own version of the Mobile HD application, sign it with their own enterprise development certificates, link with their security vendor of choice, then deploy the combined application through whichever means they feel most appropriate, including enterprise application stores.  Brian further explained that Oracle currently supports most of the major mobile security vendors, has close relationships with each, and maintains strong partnerships enabling both Oracle and the vendors to test, update and release a cooperating solution in lock-step. Oracle also ensures that as new versions of the Oracle HD application are made available on the Apple iTunes store, the same version is also immediately made available through the Security Toolkit on OTN.  Rest assured that as our workforce continues down the mobile path, company sensitive information can be secured.  To listen to the entire podcast, click here. To learn more about the Oracle BI Mobile HD, click  here To learn more about the BI Mobile Security Toolkit, click here 

  Read the article

• links for 2010-12-23

  - by Bob Rhubart

  Oracle VM Virtualbox 4.0 extension packs (Wim Coekaerts Blog) Wim Coekaerts describes the the new extension pack in Oracle VM Virtualbox 4.0 and how it's different from 3.2 and earlier releases. (tags: oracle otn virtualization virtualbox) Oracle Fusion Middleware Security: Creating OES SM instances on 64 bit systems "I've already opened a bug on this against OES 10gR3 CP5, but in case anyone else runs into it before it gets fixed I wanted to blog it too. (NOTE: CP5 is when official support was introduced for running OES on a 64 bit system with a 64 bit JVM)" - Chris Johnson (tags: oracle otn fusionmiddleware security) Oracle Enterprise Manager Grid Control: Shared loader directory, RAC and WebLogic Clustering "RAC is optional. Even the load balancer is optional. The feed from the agents also goes to the load balancer on a different port and it is routed to the available management server. In normal case, this is ok." - Porus Homi Havewala (tags: WebLogic oracle otn grid clustering) Magic Web Doctor: Thought Process on Upgrading WebLogic Server to 11g "Upgrading to new versions can be challenging task, but it's done for linear scalability, continuous enhanced availability, efficient manageability and automatic/dynamic infrastructure provisioning at a low cost." - Chintan Patel (tags: oracle otn weblogic upgrading) InfoQ: Using a Service Bus to Connect the Supply Chain Peter Paul van de Beek presents a case study of using a service bus in a supply channel connecting a wholesale supplier with hundreds of retailers, the overall context and challenges faced – including the integration of POS software coming from different software providers-, the solution chosen and its implementation, how it worked out and the lessons learned along the way. (tags: ping.fm) Oracle VM VirtualBox 4.0 is released! - The Fat Bloke Sings The Fat Bloke spreads the news and shares some screenshots.  (tags: oracle otn virtualization virtualbox) Leaks on Wikis: "Corporations...You're Next!" Oracle Desktop Virtualization Can Help. (Oracle's Virtualization Blog) "So what can you do to guard against these types of breaches where there is no outsider (or even insider) intrusion to detect per se, but rather someone with malicious intent is physically walking out the door with data that they are otherwise allowed to access in their daily work?" - Adam Hawley (tags: oracle otn virtualization security) OTN ArchBeat Podcast Guest Roster As the OTN ArchBeat Podcast enters its third year, it's time to acknowledge the invaluable contributions of the guests who have participated in ArchBeat programs. Check out this who's who of ArchBeat podcast panelists, with links to their respective interviews and more. (tags: oracle otn oracleace podcast archbeat) Show Notes: Architects in the Cloud (ArchBeat) Now available! Part 2 (of 4) of the ArchBeat interview with Stephen G. Bennett and Archie Reed, the authors of "Silver Clouds, Dark Linings: A Concise Guide to Cloud Computing." (tags: oracle otn podcast cloud) A Cautionary Tale About Multi-Source JNDI Configuration (Scott Nelson's Portal Productivity Ponderings) "I ran into this issue after reading that p13nDataSource and cgDataSource-NonXA should not be configured as multi-source. There were some issues changing them to use the basic JDBC connection string and when rolling back to the bad configuration the server went 'Boom.'" - Scott Nelson (tags: weblogic jdbc oracle jndi)

  Read the article

• What are some good questions (and good/bad answers) to ask at an interview to gauge the competency of the company/team?

  - by Wayne M

  I'm already familiar with the Joel Test, but it's been my experience that some of the questions there have the answers "massaged" to make the company seem better than it is. I've had several jobs in the past that, for instance, claimed they had a QA process and did unit testing, and what they really meant is "The programmers test the app, and test with the debugger and via trial-and-error."; they said they used SVN but they just lumped everything into one giant repository and had no concept of branching/merging or anything more complicated than updating and committing; said they can build in one step and what they really mean is it's "one step" to copy dozens of files by hand from the programmer's PC to the live server. How do you go about properly gauging a company's environment to make sure that it's a well-evolved company and not stuck on doing things a certain way because they've done it for years and they're ignorant of change? You can almost never ask to see their source code, so you're stuck trying to figure out if the interviewer's answer is accurate or BS to make the company seem good. Besides the Joel Test what are some other good questions to get the proper feel for a company, and more importantly what are some good and bad answers that could indicate a good or bad company? I mean something like (take at face value, please, it's all I could think of at short notice): Question: How does the software team apply the SOLID principles and Inversion of Control to their code? Good Answer: We adhere to SOLID wherever possible; we use TDD so it kind of forces us to write abstract, testable code. We use Ninject for our IoC container because it's fairly easy to configure - it was that or StructureMap but I find Ninject a bit more intuitive, and who doesn't like ninjas? You're not a pirate, are you? Bad Answer: Our code is pretty secure, yeah. And what's this Inversion of Control thing? I've never heard of it before. You see what I did there. The "good" answer uses facts to back it up and has a bit of "in crowd" humor; the bad answer shows complete ignorance of the question - not necessarily a bad thing if you are interviewing for a manger/director position, but a terrible answer and a huge red flag if you're interviewing as a developer and talking to a senior developer or manager! My biggest problem at the moment is being able to take a generic response and gauge whether it's the good or bad answer; more often than not it's the bad kind and I find myself frustrated almost from day one at the new job. I suppose I could name drop if I ask about specific things (e.g. "Do you write unit tests?" and if the answer is yes, ask if they use NUnit, MbUnit or something else; if they mention data access ask if they use a clean ORM like NHibernate or something more coupled like EF or Linq) but is there another way short of being resolute to actually call the interview on things (which will almost certainly result in not getting the job, but if they are skirting the question it's probably not a job I want).

  Read the article

• Removing Barriers to Create Effective Data Models

  After years of creating and maintaining data models, I have started to notice common barriers that decrease the accuracy and usefulness of models. In my opinion, the main causes of these barriers are the lack of knowledge and communication from within a company. The lack of knowledge in regards to data models or data modeling can take many forms. Company Culture Knowledge Whether documented or undocumented, existing business rules of a company can affect how data is modeled. For example, if a company only allows 1 assigned person per customer to be able to manipulate a customer’s record then then a data model that includes an associated table that joins customers and employee’s would be unneeded because that would allow for the possibility of multiple employees to handle a customer because of the potential for a many to many relationship between Customers and Employees. Technical Knowledge Depending on the data modeler’s proficiency in modeling data they can inadvertently cause issues and/or complications with a design without even noticing. It is important that companies share data modeling responsibilities so that the models are developed from multiple perspectives of a system, company and the original problem.  In addition, the tools that a company selects to create data models can also affect the accuracy of the model if designer are not familiar with the tools or the tools are too complex to use for the designer. Existing System Knowledge In order for a data modeler to model data for an existing system so that new changes can be applied to a system then they need to at least know the basic concepts of a system so that they can work within it. This will promote reusability of data and prevent the chance of duplicating data. Project Knowledge This should be pretty obvious, but it is very hard to create an accurate data model without knowing what data needs to be modeled. I have always found it strange that I have been asked to start modeling data prior to a client formalizing any requirements. Usually when this happens I have to make several iterations to a model, and the client still does not know exactly what they want.  In addition additional issues can arise when certain stakeholders of a project are not consulted prior to the design or after the project is over because it can cause miss understandings and confusion by the end user as well as possibly not solving the original problem for which a project is intended to solve. One common thread between each type of knowledge is that they can all be avoided through the use of good communication. For example, if a modeler is new to a company then they should ask older employees about any business specific rules that may be documented or undocumented that must be applied to projects in general. Furthermore, if a modeler is not really familiar with a specific data modeling software then they need to speak up and ask for help form other employees or their manager. This will not only help the modeler in the project, but also help them in future projects that they do for the company. Additionally, if a project is not clearly defined prior to a data modeler being assigned the modeling project then it is their responsibility to communicate with the other stakeholders to clarify any part of a project that is unclear so that the data model that is created is accurately aligned with a project.

  Read the article

• WebCenter Customer Spotlight: Textron Inc.

  - by me

  Author: Peter Reiser - Social Business Evangelist, Oracle WebCenter  Solution SummaryTextron Inc. is one of the world's best known multi-industry companies and is a pioneer of the diversified business model. Founded in 1923, it has grown into a network of businesses—including Bell Helicopter, E-Z-GO, Cessna, and Jacobsen—with facilities and a presence in 25 countries, serving a diverse and global customer base. Textron is ranked 236th on the Fortune 500 list of the largest US companies. Textron needed a Web experience management solution to centralize control, minimize costs, and enable more efficient operations. Specifically, the company wanted to take IT out of the picture as much as possible, enabling sales and marketing leads for subsidiaries to make Website updates as they deem appropriate for their business.   Textron worked with Oracle partner Element Solutions to consolidate its Website management systems onto Oracle WebCenter Sites. The implementation enables Textron’s subsidiaries to adjust more quickly to customer demands,  reduced Website management cost & time to update content on a Website while allowing to integrate its Website updates more closely with social media and mobile platforms. Company OverviewTextron Inc. is one of the world's best known multi-industry companies and is a pioneer of the diversified business model. Founded in 1923, it has grown into a network of businesses—including Bell Helicopter, E-Z-GO, Cessna, and Jacobsen—with facilities and a presence in 25 countries, serving a diverse and global customer base. Textron is ranked 236th on the Fortune 500 list of the largest US companies. Business ChallengesWith numerous subsidiaries and more than 50 public Websites, Textron needed a Web experience management solution to centralize control, minimize costs, and enable more efficient operations. Specifically, the company wanted to take IT out of the picture as much as possible, enabling sales and marketing leads for subsidiaries to make Website updates as they deem appropriate for their business.   Solution DeployedTextron worked with Oracle partner Element Solutions to consolidate its Website management systems onto Oracle WebCenter Sites. Specifically, Textron: Used Oracle WebCenter Sites to integrate Web experience management capabilities for all Textron brands, including Bell Helicopter, E-Z-GO, Cessna, and Jacobsen Developed Website templates to enable marketing and communications professionals to easily make updates to their Websites, without having to work with IT Reduced Website management costs, as it costs more for IT to coordinate Website updates as opposed to marketing and communications Enabled IT to concentrate on other activities to enhance overall operations for Textron, such as project workflows Acquired a platform that enables marketing teams to integrate their Websites with social media and mobile platforms, allowing subsidiaries to make updates and contact customers anytime and everywhere—including through tablets and smartphones Reduced the time it takes to update content on a Website, including press releases, by enabling communications professionals to make updates directly Developed more appealing visual designs for Websites to help enhance customer purchase Business ResultsThe implementation enabled Textron’s subsidiaries to adjust more quickly to customer demands and Textron’s IT staff to concentrate on other processes, such as writing code and developing new workflows, enabling them to enhance company processes. In addition, Textron can use Oracle WebCenter Sites to integrate its Website updates more closely with social media and mobile platforms, enabling marketing and communications teams to make updates anytime and everywhere. The initiative has enabled Textron to save money by freeing IT up to work on more important tasks, instituting new e-commerce and mobile initiatives to better engage customers, and by ensuring efficient Website management processes to quickly adjust to customer demands.  “We considered a number of products, but chose Oracle WebCenter Sites because it provides the best user interface. We reviewed customer references and analyst reports, and Oracle WebCenter Sites was consistently at the top of the list,” Brad Hof, Manager, Advanced Business Solutions and Web Communications, Textron Inc. Additional Information Tectron Inc. Customer Snapshot Oracle WebCenter Sites

  Read the article

• Administer, manage, monitor, and fine tune the performance of your Oracle SOA Suite 11g Service Infrastructure and SOA composite applications.

  - by JuergenKress

  Key Features of the book If you are an Oracle SOA suite administrator, then this book is your bible. It gives you everything you need to know about all your tasks and help you to apply what you learn in your everyday life right from the first chapter. The book walks through promoting code across environments, performance tuning the service infrastructure, monitoring the environment, configuring security policies, managing the dehydration store, backing and restoring environments and so on. Packed with real-world examples from authors' own experiences, this books offers a unique insight into Oracle SOA Suite Administration. Detailed description The book begins with an introduction of SOA and quickly moves on to management of SOA composite applications. Readers will learn how to manage composite applications, their deployments and lifecycles. Equipped with this knowledge, readers will be introduced to monitoring and performance tuning SOA Suite, monitoring instances, messages, and composite applications, managing faults and exceptions, configuring audit levels of composite applications to include end-to-end monitoring through the use of extended logging as well as administering and configuring all SOA Suite components. A very important aspect of administration is tuning and optimizing the infrastructure for performance and book offers real work recommendations to monitor and performance tune service engines, the underlying WebLogic server, threads and timeouts, files systems, and composite applications. It also covers detailed administration of individual service components, configuring the infrastructure MBeans using both Oracle Enterprise Manager Fusion Middleware Control and WLST based scripts, migrating worklist preferences and BAM data across environments, setting up Email, LDAP and custom XPath. An administrator is always trusted with troubleshooting and root causing problems in the infrastructure and this book will help you through the troubleshooting approaches as how to identify faults and exception through extended logging and thread dumps and find solutions to common startup problems and deployment issues. The advanced contents of this book explains OWSM security framework and how to secure components deployed to the infrastructure along with the details of all groundwork needed to ready the environment. Last few chapters help you to understand and deal with managing the metadata services repository and dehydration store, backup and recovery and concluding with advanced topics such as silent/scripted installations, cloning, upgrading, patching and high availability installations. Packed with real-world examples, and tips straight from the trench; this book offers insights into SOA Suite administration that you will not find elsewhere. Part of our writing style in this book draws heavily on the philosophy of reuse and as such the book provide an ample of executable SQL queries and WLST scripts that administrators can reuse and extend to perform most of the administration tasks such as monitoring instances, processing times, instance states and perform automatic deployments, tuning, migration, and installation. These scripts are spread over each of the chapters in the book and can also be downloaded from here. The book is available in different formats at the following websites: Paperback and eBook versions & Kindle version. It is available for order and signed copies are available through our web site. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: SOA book,SOA Suite Adminsitration,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

  Read the article

• Question on the implementation of my Entity System

  - by miguel.martin

  I am currently creating an Entity System, in C++, it is almost completed (I have all the code there, I just have to add a few things and test it). The only thing is, I can't figure out how to implement some features. This Entity System is based off a bit from the Artemis framework, however it is different. I'm not sure if I'll be able to type this out the way my head processing it. I'm going to basically ask whether I should do something over something else. Okay, now I'll give a little detail on my Entity System itself. Here are the basic classes that my Entity System uses to actually work: Entity - An Id (and some methods to add/remove/get/etc Components) Component - An empty abstract class ComponentManager - Manages ALL components for ALL entities within a Scene EntitySystem - Processes entities with specific components Aspect - The class that is used to help determine what Components an Entity must contain so a specific EntitySystem can process it EntitySystemManager - Manages all EntitySystems within a Scene EntityManager - Manages entities (i.e. holds all Entities, used to determine whether an Entity has been changed, enables/disables them, etc.) EntityFactory - Creates (and destroys) entities and assigns an ID to them Scene - Contains an EntityManager, EntityFactory, EntitySystemManager and ComponentManager. Has functions to update and initialise the scene. Now in order for an EntitySystem to efficiently know when to check if an Entity is valid for processing (so I can add it to a specific EntitySystem), it must recieve a message from the EntityManager (after a call of activate(Entity& e)). Similarly the EntityManager must know when an Entity is destroyed from the EntityFactory in the Scene, and also the ComponentManager must know when an Entity is created AND destroyed. I do have a Listener/Observer pattern implemented at the moment, but with this pattern I may remove a Listener (which is this case is dependent on the method being called). I mainly have this implemented for specific things related to a game, i.e. Teams, Tagging of entities, etc. So... I was thinking maybe I should call a private method (using friend classes) to send out when an Entity has been activated, deleted, etc. i.e. taken from my EntityFactory void EntityFactory::killEntity(Entity& e) { // if the entity doesn't exsist in the entity manager within the scene if(!getScene()->getEntityManager().doesExsist(e)) { return; // go back to the caller! (should throw an exception or something..) } // tell the ComponentManager and the EntityManager that we killed an Entity getScene()->getComponentManager().doOnEntityWillDie(e); getScene()->getEntityManager().doOnEntityWillDie(e); // notify the listners for(Mouth::iterator i = getMouth().begin(); i != getMouth().end(); ++i) { (*i)->onEntityWillDie(*this, e); } _idPool.addId(e.getId()); // add the ID to the pool delete &e; // delete the entity } As you can see on the lines where I am telling the ComponentManager and the EntityManager that an Entity will die, I am calling a method to make sure it handles it appropriately. Now I realise I could do this without calling it explicitly, with the help of that for loop notifying all listener objects connected to the EntityFactory's Mouth (an object used to tell listeners that there's an event), however is this a good idea (good design, or what)? I've gone over the PROS and CONS, I just can't decide what I want to do. Calling Explicitly: PROS Faster? Since these functions are explicitly called, they can't be "removed" CONS Not flexible Bad design? (friend functions) Calling through Listener objects (i.e. ComponentManager/EntityManager inherits from a EntityFactoryListener) PROS More Flexible? Better Design? CONS Slower? (virtual functions) Listeners can be removed, i.e. may be removed and not get called again during the program, which could cause in a crash. P.S. If you wish to view my current source code, I am hosting it on BitBucket.

  Read the article

• Sparse virtual machine disk image resizing weirdness?

  - by Matt H

  I have a partitioned virtual machine disk image created by vmware. What I want to do is resize that by 10GB. The file size is showing as 64424509440. Or 60GB. So I ran this: dd if=/dev/zero of=./win7.img seek=146800640 count=0 It ran without errors and I can verify the new size is in fact 75161927680 bytes or 70GB. This is where it gets a little odd. I started the guest domain in xen which is a Windows 7 enterprise machine. What I was expecting to see in diskmgmt.msc is 2 partitions. 1 system partition at the start of around 100MB and near 60GB partition (which is C drive) followed by around 10GB of free space. Actually what I saw was a 70GB partition!?! That confused me... so I decided to run the Check Disk which when you set it on the C drive it asks you to reboot so it'll run on boot. So I did that and during the boot it ran the checks. It got all the way through stage 3 and didn't show any errors at all. Looked at the partitions in disk manager and now C drive has shrunk back to 60GB and there is no free space. What gives? Ok, I thought I'd try mounting it under Dom0 and examining it with fdisk. This is what I get when mounted sudo xl block-attach 0 tap:aio:/home/xen/vms/otoy_v1202-xen.img xvda w sudo fdisk -l /dev/xvda Disk /dev/xvda: 64.4 GB, 64424509440 bytes 255 heads, 63 sectors/track, 7832 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x582dfc96 Device Boot Start End Blocks Id System /dev/xvda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/xvda2 13 7833 62810112 7 HPFS/NTFS Note the cylinder boundary comment. When I run sudo cfdisk /dev/xvda I get: FATAL ERROR: Bad primary partition 1: Partition ends in the final partial cylinder Press any key to exit cfdisk So I guess this is a bigger problem than first thought. How can I fix this? EDIT: Oops, the cylinder boundary thing is not a problem at all since disks have used LBA etc. So that threw me for a moment... still the problem exists... Now this output looks a little different. sudo sfdisk -uS -l /dev/xvda Disk /dev/xvda: 7832 cylinders, 255 heads, 63 sectors/track Units = sectors of 512 bytes, counting from 0 Device Boot Start End #sectors Id System /dev/xvda1 * 2048 206847 204800 7 HPFS/NTFS /dev/xvda2 206848 125827071 125620224 7 HPFS/NTFS /dev/xvda3 0 - 0 0 Empty /dev/xvda4 0 - 0 0 Empty BTW: I do have a backup of the image so if you help me mess it up that's ok. EDIT: sudo parted /dev/xvda print free Model: Xen Virtual Block Device (xvd) Disk /dev/xvda: 64.4GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 32.3kB 1049kB 1016kB Free Space 1 1049kB 106MB 105MB primary ntfs boot 2 106MB 64.4GB 64.3GB primary ntfs 64.4GB 64.4GB 1049kB Free Space Cool. Linux is showing free space is 10GB which is what I expect. The problem is windows isn't seeing this?

  Read the article

• SQL Authority News – Presenting at SQL Bangalore on May 3, 2014 – Performing an Effective Presentation

  - by Pinal Dave

  SQL Bangalore is a wonderful community and we always have a great response when we present on technology. It is SQL User Group and we discuss everything SQL there. This month we have SQL Server 2014 theme and we are going to have a community launch on this subject. We have the best of the best speakers presenting on SQL Server 2014 technology. Looking at the whole line of celebrity speakers, I have decided not to present on SQL Server. I will be presenting on the performance tuning subject, but with the twist of soft skills. I will be presenting on “Performing an Effective Presentation“. Trust me, you do not want to miss this presentation, I will be presenting on how to present effectively when presenting SQL Server topics. What this session will NOT have I personally believe that we all are good presenters most of the time. We can all easily call out if someone is bad presenter. There is no point talking about basics like bigger bullet points, talk loudly, talk with confidence, use better analogies etc. In simple words – this is not going to some philosophy session and boring notes. What this session will have Well, this session will tell stories of my life. It will tell how we can present about technology and SQL Server with the help of stories and personal experience. I am going to tell stories about two legends  who have inspired me. Right after that we will be doing two exercises together where we will learn quickly and effectively, how to become better speaker – instantly! There is no video recording of this session. If you want to get resources from this session, please sign up my newsletter at http://bit.ly/sqllearn Here are few of the slides from this presentation: Here is the details about the event and location Venue:Microsoft Corporation, Signature Building,Embassy Golf Links Business Park, Intermediate Ring Road, Domlur, Bangalore – 560071 The agenda is amazing – we have top line SQL Speakers. Everyone is welcome and don’t forget to get your friend along for this event. Loads to learn and tons to share !!! Keynote (20 mins) by Anupam Tiwari – Business Program Manager – GTSC Backup Enhancements with SQL Server 2014 by Amit Banerjee – PFE Microsoft Performance Enhancements with SQL Server 2014 by Sourabh Agarwal - PFE Microsoft LUNCH BREAK Performing an effective Presentation by Pinal Dave – Community Member (SQLAuthority.com) InMemory Enhancements with SQL Server 2014 by Balmukund Lakhani – Support Escalation Engg. Microsoft Some more lesser known enhancements with SQL Server 2014 by Vinod Kumar – Technical Architect Microsoft MTC Power Packed – Power BI with SQL Server by Kane Conway – Support Escalation Engg. Microsoft I am very big fan of Amit, Balmukund and Vinod – I have always watched their session and this time, I am going to once again attend their session without missing a single min. They are SQL legends, I am going to be there and learn when they are sharing their knowledge.  Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, T SQL

  Read the article

• Chalk Talk with John: How Does SOA Add Value to Your Enterprise?

  - by John Brunswick

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} In this episode of Chalk Talk with John we revisit our town of Middleware Fields from What Does User Experience Mean to You? to look at demystifying the business value of SOA. Middleware fields is an extremely eco-conscious community and has been trying to setup a commuting program for their employees. Though a good idea, they soon run into challenges ensuring that people are able to use the commuting services easily.  Take a look below to see how SOA is like a transit pass for your enterprise and how it addresses common issues you may have with your enterprise systems. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} About me: Hi, I am John Brunswick, an Oracle Enterprise Architect. As an Oracle Enterprise Architect, I focus on the alignment of technical capabilities in support of business vision and objectives, as well as the overall business value of technology.  Before coming to Oracle, I was a Practice Manager within BEA System's Business Interaction Division consulting organization, orchestrating enterprise systems in support of line of business goals. Follow me on Twitter and visit my site for Oracle Fusion Middleware related tips.

  Read the article

• It’s official – Red Gate is a great place to work!

  - by red@work

  At a glittering award ceremony last week, we found out that we’re officially the 14th best small company to work for in the whole of the UK! This is no mean feat, considering that about 1,000 companies enter the Sunday Times Top 100 best companies awards each year. Most of these are in the small companies category too. It's the fourth year in a row for us to be in the Top 100 list and we're tickled pink because the results are based on employee opinion. We’re particularly proud to be the best small company in Cambridge (in the whole of East Anglia, in fact) and the best small software development company in the entire UK. So how does it all work? Well, 90% of us took the time to answer over 70 questions on categories such as management, benefits, wellbeing, leadership, giving something back and what we think of Red Gate as a whole. It makes you think about every part of day to day working life and how you feel about it. Do you slightly or strongly agree or disagree that your manager motivates your to do your best every day, or that you have confidence in Red Gate's leaders, or that you’re not spending too much time working? It's great to see that we had one of the best scores in the country for the question "Do you think your company takes advantage of you?" We got particularly high scores for management, wellbeing and for giving something back too. A few of us got dressed up and headed to London for the awards; very excited about where we’d place but slightly nervous about having to get up on stage. There was a last minute hic up with a bow tie but the Managing Editor of the Sunday Times kindly stepped in to offer his assistance just before we had our official photo taken. We were nominated for two Special Recognition Awards. Despite not bringing them home this year, we're very proud to be nominated as there are only three nominations in each category. First we were up for the Training and Development award. Best Companies loved that we get together at lunchtimes to teach each other photography, cookery and French, as well as our book clubs and techie talks. And of course they liked our opportunities to go on training courses and to jet off to international conferences. Our other nomination was for the Wellbeing award. Best Companies loved our free food (and let’s face it, so do we). Porridge or bacon sandwiches for breakfast, a three course hot dinner, and free fruit and cereals all day long. If all that has an affect on the waistline then there are plenty of sporty activities for us all to get involved in, such as yoga, running or squash. Or if that’s not your thing then a relaxing massage helps us all to unwind every few months or so. The awards were hosted by news presenter Kate Silverton. She gave us a special mention during the ceremony for having great customer engagement as well as employee engagement, after we told her about Rodney Landrum (a Friend of Red Gate) tattooing our logo on his arm. We showed off our customised dinner jacket (thanks to Dom from Usability) with a flashing Red Gate logo on the back and she seemed suitability impressed. Back in the office the next day, we popped open the champagne and raised a glass to our success. Neil, our joint CEO, talked about how pleased he was with the award because it's based on the opinions of the people that count – us. You can read more about the Sunday Times awards here. By the way, we're still growing and are still hiring. If you’d like to keep up with our latest vacancies then why not follow us on Twitter at twitter.com/redgatecareers. Right now we're busy hiring in development, test, sales, product management, web development, and project management. Here's a link to our current job opportunities page – we'd love to hear from great people who are looking for a great place to work! After all, we're only great because of the people who work here. Post by: Alice Chapman

  Read the article

• How to remove synaptic without installing all the unwanted packages?

  - by Jay

  I am trying to uninstall synaptic. I prefer using apt-get and other command line tools to manage my packages. So I do not need synaptic and the software manager. I'm trying to remove both of them using apt-get. Its a new box. Recently installed Linux Mint mate 15. After installation, the only thing I did was, sudo apt-get update and sudo apt-get dist-upgrade After that, I did this command for removing synaptic, sudo apt-get remove --purge synaptic But this gives me a very weird output, Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: apturl-kde icoutils kate-data katepart kde-runtime kde-runtime-data kdelibs-bin kdelibs5-data kdelibs5-plugins kdesudo kdoctools kubuntu-debug-installer libattica0.4 libdlrestrictions1 libkactivities-bin libkactivities-models1 libkactivities6 libkatepartinterfaces4 libkcmutils4 libkde3support4 libkdeclarative5 libkdecore5 libkdesu5 libkdeui5 libkdewebkit5 libkdnssd4 libkemoticons4 libkfile4 libkhtml5 libkidletime4 libkio5 libkjsapi4 libkjsembed4 libkmediaplayer4 libknewstuff3-4 libknotifyconfig4 libkntlm4 libkparts4 libkpty4 libkrosscore4 libktexteditor4 libkxmlrpcclient4 libnepomuk4 libnepomukcore4abi1 libnepomukquery4a libnepomukutils4 libntrack-qt4-1 libntrack0 libphonon4 libplasma3 libpolkit-qt-1-1 libpoppler-qt4-4 libqapt2 libqapt2-runtime libqca2 libqt4-qt3support libsolid4 libsoprano4 libstreamanalyzer0 libstreams0 libthreadweaver4 libvirtodbc0 nepomuk-core nepomuk-core-data ntrack-module-libnl-0 odbcinst odbcinst1debian2 oxygen-icon-theme phonon phonon-backend-gstreamer plasma-scriptengine-javascript qapt-batch shared-desktop-ontologies soprano-daemon virtuoso-minimal virtuoso-opensource-6.1-bin virtuoso-opensource-6.1-common Use 'apt-get autoremove' to remove them. The following extra packages will be installed: apturl-kde icoutils kate-data katepart kde-runtime kde-runtime-data kdelibs-bin kdelibs5-data kdelibs5-plugins kdesudo kdoctools kubuntu-debug-installer libattica0.4 libdlrestrictions1 libkactivities-bin libkactivities-models1 libkactivities6 libkatepartinterfaces4 libkcmutils4 libkde3support4 libkdeclarative5 libkdecore5 libkdesu5 libkdeui5 libkdewebkit5 libkdnssd4 libkemoticons4 libkfile4 libkhtml5 libkidletime4 libkio5 libkjsapi4 libkjsembed4 libkmediaplayer4 libknewstuff3-4 libknotifyconfig4 libkntlm4 libkparts4 libkpty4 libkrosscore4 libktexteditor4 libkxmlrpcclient4 libnepomuk4 libnepomukcore4abi1 libnepomukquery4a libnepomukutils4 libntrack-qt4-1 libntrack0 libphonon4 libplasma3 libpolkit-qt-1-1 libpoppler-qt4-4 libqapt2 libqapt2-runtime libqca2 libqt4-qt3support libsolid4 libsoprano4 libstreamanalyzer0 libstreams0 libthreadweaver4 libvirtodbc0 libxml2-utils nepomuk-core nepomuk-core-data ntrack-module-libnl-0 odbcinst odbcinst1debian2 oxygen-icon-theme phonon phonon-backend-gstreamer plasma-scriptengine-javascript qapt-batch shared-desktop-ontologies soprano-daemon virtuoso-minimal virtuoso-opensource-6.1-bin virtuoso-opensource-6.1-common Suggested packages: libterm-readline-gnu-perl libterm-readline-perl-perl djvulibre-bin finger hspell libqca2-plugin-cyrus-sasl libqca2-plugin-gnupg libqca2-plugin-ossl phonon-backend-vlc phonon-backend-xine phonon-backend-mplayer The following packages will be REMOVED: aptoncd* apturl* mintupdate* mintwelcome* synaptic* The following NEW packages will be installed: apturl-kde icoutils kate-data katepart kde-runtime kde-runtime-data kdelibs-bin kdelibs5-data kdelibs5-plugins kdesudo kdoctools kubuntu-debug-installer libattica0.4 libdlrestrictions1 libkactivities-bin libkactivities-models1 libkactivities6 libkatepartinterfaces4 libkcmutils4 libkde3support4 libkdeclarative5 libkdecore5 libkdesu5 libkdeui5 libkdewebkit5 libkdnssd4 libkemoticons4 libkfile4 libkhtml5 libkidletime4 libkio5 libkjsapi4 libkjsembed4 libkmediaplayer4 libknewstuff3-4 libknotifyconfig4 libkntlm4 libkparts4 libkpty4 libkrosscore4 libktexteditor4 libkxmlrpcclient4 libnepomuk4 libnepomukcore4abi1 libnepomukquery4a libnepomukutils4 libntrack-qt4-1 libntrack0 libphonon4 libplasma3 libpolkit-qt-1-1 libpoppler-qt4-4 libqapt2 libqapt2-runtime libqca2 libqt4-qt3support libsolid4 libsoprano4 libstreamanalyzer0 libstreams0 libthreadweaver4 libvirtodbc0 libxml2-utils nepomuk-core nepomuk-core-data ntrack-module-libnl-0 odbcinst odbcinst1debian2 oxygen-icon-theme phonon phonon-backend-gstreamer plasma-scriptengine-javascript qapt-batch shared-desktop-ontologies soprano-daemon virtuoso-minimal virtuoso-opensource-6.1-bin virtuoso-opensource-6.1-common 0 upgraded, 78 newly installed, 5 to remove and 0 not upgraded. Need to get 60.9 MB of archives. After this operation, 146 MB of additional disk space will be used. Do you want to continue [Y/n]? n Abort. As you can see, apt-get is trying to install the same packages that it is asking me to autoremove. Could someone please tell me, how to uninstall synaptic properly? Or am I missing something? Just for the record, I also did, sudo apt-get autoremove --purge like it asked me to ... and this is what I got, Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 6 not upgraded.

  Read the article

• Upgrade issues due to broken "dependency problems prevent configuration of linux-image-generic" error

  - by tsukune1791

  okay, I've recently upgrade from 11.10 to 12.04 and I've been having some issues. I don't know if its a bug or not, but I thought I would submit it here. Okay here's a little background; I ran the distro update from the update manager and got a couple errors that I didn't catch. the computer restarted, and when I logged the Launcher and my top bar of the Ubuntu desktop didn't load. While it was trying to load a couple error messages came up, I think they were called "apport", saying they couldn't send the bug information for some reason. I believe it said somethings wrong with my internet connection, but nothing's wrong with it. Anyway I tried running some things in terminal, namely sudo apt-get -f install sudo apt-get upgrade sudo apt-get dist-upgrade and keep getting the following errors; dustin@marceau-laptop:~$ sudo apt-get dist-upgrade [sudo] password for dustin: Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 4 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? Y Setting up initramfs-tools (0.99ubuntu13) ... update-initramfs: deferring update (trigger activated) Setting up linux-image-3.2.0-24-generic (3.2.0-24.37) ... Running depmod. update-initramfs: deferring update (hook will be called later) Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/dkms 3.2.0-24-generic /boot/vmlinuz-3.2.0-24-generic run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-24-generic /boot/vmlinuz-3.2.0-24-generic update-initramfs: Generating /boot/initrd.img-3.2.0-24-generic run-parts: executing /etc/kernel/postinst.d/pm-utils 3.2.0-24-generic /boot/vmlinuz-3.2.0-24-generic run-parts: executing /etc/kernel/postinst.d/update-notifier 3.2.0-24-generic /boot/vmlinuz-3.2.0-24-generic run-parts: executing /etc/kernel/postinst.d/zz-runlilo 3.2.0-24-generic /boot/vmlinuz-3.2.0-24-generic Fatal: No images have been defined. run-parts: /etc/kernel/postinst.d/zz-runlilo exited with return code 1 Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-3.2.0-24-generic.postinst line 1010. dpkg: error processing linux-image-3.2.0-24-generic (--configure): subprocess installed post-installation script returned error exit status 2 dpkg: dependency problems prevent configuration of linux-image-generic: linux-image-generic depends on linux-image-3.2.0-24-generic; however: Package linux-image-3.2.0-24-generic is not configured yet. dpkg: error processing linux-image-generic (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-generic: linux-generic depends on linux-image-generic (= 3.2.0.24.26); however: Package linux-image-generic is not configured yet. dpkg: error processing linux-generic (--configure): dependency problems - leaving unconfigured Processing triggers for initramfs-tools ... No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because the error message indicates its a followup error from a previous failure. update-initramfs: Generating /boot/initrd.img-3.2.0-24-generic Fatal: No images have been defined. run-parts: /etc/initramfs/post-update.d//runlilo exited with return code 1 dpkg: error processing initramfs-tools (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: linux-image-3.2.0-24-generic linux-image-generic linux-generic initramfs-tools localepurge: Disk space freed in /usr/share/locale: 0 KiB localepurge: Disk space freed in /usr/share/man: 0 KiB localepurge: Disk space freed in /usr/share/gnome/help: 0 KiB localepurge: Disk space freed in /usr/share/omf: 0 KiB localepurge: Disk space freed in /usr/share/doc/kde/HTML: 0 KiB Total disk space freed by localepurge: 0 KiB E: Sub-process /usr/bin/dpkg returned an error code (1) And my Ubuntu desktop is still not working. I can log into Gnome and Ubuntu 2D but the Launcher, I think it's call, doesn't load. Can someone help me fix these error, or point me in the right direction to get them fixed? It is much appriciated.

  Read the article

• ArchBeat Link-o-Rama Top 10 for November 2012

  - by Bob Rhubart

  Every day ArchBeat searches the web for content created by and for community members, and then shares that content via social media. Here's the list of the Top 10 most popular items posted on the OTN ArchBeat Facebook Page for November 2012. One-Stop Shop for Oracle Webcasts Webcasts can be a great way to get information about Oracle products without having to go cross-eyed reading yet another document off your computer screen. Oracle's new Webcast Center offers selectable filtering to make it easy to get to the information you want. Yes, you have to register to gain access, but that process is quick, and with over 200 webcasts to choose from you know you'll find useful content. OAM/OVD JVM Tuning Vinay from the Oracle Fusion Middleware Architecture Group (otherwise known as the A-Team) shares a process for analyzing and improving performance in Oracle Virtual Directory and Oracle Access Manager. White Paper: Oracle Exalogic Elastic Cloud: Advanced I/O Virtualization Architecture for Consolidating High-Performance Workloads This new white paper by Adam Hawley (with contributions from Yoav Eilat) describes in great detail the incorporation into Oracle Exalogic of virtualized InfiniBand I/O interconnects using Single Root I/O Virtualization (SR-IOV) technology. Architected Systems: "If you don't develop an architecture, you will get one anyway..." "Can you build a system without taking care of architecture?," asks Manuel Ricca. "You certainly can. But inevitably the system will be unbalanced, neglecting the interests of key stakeholders, and problems will soon emerge." Backup and Recovery of an Exalogic vServer via rsync "On Exalogic a vServer will consist of a number of resources from the underlying machine," says the man known only as Donald. "These resources include compute power, networking and storage. In order to recover a vServer from a failure in the underlying rack all of these components have to be thoughts about. This article only discusses the backup and recovery strategies that apply to the storage system of a vServer." This Week on the OTN Architect Community Home Page Make time to check out this week's features on the OTN Solution Architect Homepage, including: SOA Practitioner Guide: Identifying and Discovering Services Technical article by Yuli Vasiliev on Setting Up, Configuring, and Using an Oracle WebLogic Server Cluster Podcast: Are You Future Proof? Clustering ODI11g for High-Availability Part 1: Introduction and Architecture | Richard Yeardley "JEE agents can be deployed alongside, or instead of, standalone agents," says Rittman Meade's Richard Yeardley. "But there is one key advantage in using JEE agents and WebLogic – when you deploy JEE agents as part of a WebLogic cluster they can be configured together to form a high availability cluster." Learn more in Yeardley's extensive post. OIM 11g : Multi-thread approach for writing custom scheduled job | Saravanan V S Saravanan shares insight and expertise relevant to "designing and developing an OIM schedule job that uses multi threaded approach for updating data in OIM using APIs." How to Create Virtual Directory in Weblogic Server | Zeeshan Baig Oracle ACE Zeeshan Baig shows you how in six easy steps. SOA Galore: New Books for Technical Eyes Only Shake up up your technical skills with this trio of new technical books from community members covering SOA and BPM. Thought for the Day "Humans are the best value in computers -- where else can you get a non-linear computer weighing only about 160lbs, having a billion binary decision elements, that can be mass-produced by unskilled labour?" — Anonymous Source: SoftwareQuotes.com

  Read the article

• Friday Tips #6, Part 1

  - by Chris Kawalek

  We have a two parter this week, with this post focusing on desktop virtualization and the next one on server virtualization. Question: Why would I use the Oracle Secure Global Desktop Secure Gateway? Answer by Rick Butland, Principal Sales Consultant, Oracle Desktop Virtualization: Well, for the benefit of those who might not be familiar with client connections in Oracle Secure Global Desktop (SGD), let me back up and briefly explain. An SGD client connects to an SGD server using two distinct protocols, which, by default, require two distinct TCP ports. The first is the HTTP protocol, used by the web browser to connect to the SGD webserver on TCP port 80, or if secure connections are enabled (SSL/TLS), then TCP port 443, commonly identified as the "HTTPS" port, that is, "SSL encrypted HTTP." The second protocol from the client to the server is the Adaptive Internet Protocol, or AIP, which is used for displaying applications, transferring drive mapping data, print jobs, and so on. By default, AIP uses the TCP port 3104, or port 5307 when SSL is enabled. When SGD clients need to access SGD over a firewall, the ports that AIP requires are typically "closed"; and most administrators are reluctant, to put it mildly, to change their firewall configurations to allow AIP traffic on 3144/5307.   To avoid this problem, SGD introduced "Firewall Forwarding", a technique where, in effect, both http and AIP traffic are "multiplexed" onto a single "well-known" TCP port, that is port 443, the https port.  This is also known as single-port firewall traversal.  This technique takes advantage of the fact that, as a "well-known service", port 443 is usually "open",   allowing (encrypted) traffic to pass. At the target SGD server, the two protocols are de-multiplexed and routed appropriately. The Secure Gateway was developed in response to requirements from customers for SGD to support multi-stage DMZ's, and to avoid exposing SGD servers and the information they contain directly to connections from the Internet. The Secure Gateway acts as a reverse-proxy in the first-tier of the DMZ, accepting, authenticating, and terminating incoming client connections, and then re-encrypting the connections, and proxying them, routing them on to SGD servers, deeper in the network. The client no longer needs to know the name/IP address of the SGD servers in their network, they connect to the gateway, only. The gateway takes care of those internal network details.     The Secure Gateway supports the same "single-port firewall" capability as does "Firewall Forwarding", but offers the additional advantage of load-balancing incoming client connections amongst SGD array members, which could be cumbersome without a forward-deployed secure gateway. Load-balancing weights and policies can be monitored and tuned using the "Balancer Manager" application, and Apache mod_proxy_balancer directives.   Going forward, our architects recommend the use of the Secure Gateway over "Firewall Forwarding" for single-port firewall traversal, due to its architectural advantages, its greater flexibility and enhanced features.  Finally, it should be noted that the Secure Gateway is not separately priced; any licensed SGD customer may use the Secure Gateway component at no additional cost.   For more information, see the "Secure Gateway Administrator's Guide".

  Read the article

• Attending a Career Fair: &ldquo;Don&rsquo;t be shy &ndash; Be prepared&rdquo;

  - by jessica.ebbelaar

  There are a large number of ways to interact with companies nowadays. The career fair is a very effective and personal way to interact with a number of different companies in a very short period of time. Here are some simple tips to help you perform during a career fair. Do research The key to being successful at a career fair is to do research before you go. Make a first selection of the companies you feel could be interesting for you. Include many types of employers. Once you have decided on the list of companies you want to visit, go to their career portal. Inform yourself about what the company does, i.e what roles there are available, how the company culture is described, what impression the testimonials give you. The question that you still have after reviewing this information, are the ones you can discuss with the company on the fair. Sell yourself Visit the companies you have on your top 5 list first, so you will be at your highest energy level to make that first impression. Think in advance about what you are going to tell the recruiter. Prepare a 30-second introduction (including degree, strengths, skills & experience) Be confident when you talk about your experience. Remember to start the conversation with a smile, make good eye contact and give a firm handshake. You could be speaking to your next manager, so be professional! If you already know what jobs you are interested in, relate your skills and experience to the roles that the company has available. If you are not yet sure gather as much information as you can about employment and/or hiring procedures, specific skills necessary for different jobs, training and career paths. Stand out As career fairs are very crowded and the attending companies meet with a lot of potential candidates on one day, you have to make sure you are noticed in a positive way. A good preparation and asking questions that show you have a good understanding of the industry, organization and roles will help you. Be aware of time demands on employers. Do not monopolize an employer's time. Dress appropriately to make a good first impression. Bring your resume Do not forget to bring your resume in print or on a USB-stick to the fair. If you are searching for different types of jobs, bring different versions of your resume. Your resume should be short and professional on white paper that is free of graphics or fancy print styles and containing larger margins for interviewer notes. Follow up After each conversation ask who you can contact for follow-up discussions about the specific roles. Use the back of a business card to record notes that help you remember important details and follow-up instructions. If no card is available, record the contact information and your comments in your notepad or phone. Last but not least, thank everyone you talk to for their time. Follow up as soon as possible with thank you notes that address the companies’ hiring needs, your qualifications, and express your desire for a second interview. What not to do… Do not visit a company with a group of friends. Interact with the companies on your own, to make your own positive impression. Do not walk up to a recruiter and interrupt a current conversation; wait your turn and be polite. What you should absolutely avoid is a grab and run on freebies! Take the time to speak to the company and ask for a freebie at the end of the conversation in case they are not offered to you. Good luck with the preparations for the career fair you will attend. Oracle recruiters look forward to meet you! They will be present on a large number of fairs in the region. For an overview of the fairs go to the Events & Calendar page on http://campus.oracle.com If you have any questions related to this article feel free to contact [email protected].

  Read the article

• Five Key Trends in Enterprise 2.0 for 2011

  - by kellsey.ruppel(at)oracle.com

  We recently sat down with Andy MacMillan, an industry veteran and vice president of product management for Enterprise 2.0 at Oracle, to get his take on the year ahead in Enterprise 2.0 (E2.0). He offered us his five predictions about the ways he believes E2.0 technologies will transform business in 2011. 1. Forward-thinking organizations will achieve an unprecedented level of organizational awareness. Enterprise 2.0 and Web 2.0 technologies have already transformed the ways customers, employees, partners, and suppliers communicate and stay informed. But this year we are anticipating that organizations will go to the next step and integrate social activities with business applications to deliver rich contextual "activity streams." Activity streams are a new way for enterprise users to get relevant information as quickly as it happens, by navigating to that information in context directly from their portal. We don't mean syndicating social activities limited to a single application. Instead, we believe back-office systems will be combined with social media tools to drive how users make informed business decisions in brand new ways. For example, an account manager might log into the company portal and automatically receive notification that colleagues are closing business around a certain product in his market segment. With a single click, he can reach out instantly to these colleagues via social media and learn from their successes to drive new business opportunities in his own area. 2. Online customer engagement will become a high priority for CMOs. A growing number of chief marketing officers (CMOs) have created a new direct report called "head of online"--a senior marketing executive responsible for all engagements with customers and prospects via the Web, mobile, and social media. This new field has been dubbed "Web experience management" or "online customer engagement" by firms and analyst organizations. It is likely to rapidly increase demand for a host of new business objectives and metrics from Web content management solutions. As companies interface with customers more and more over the Web, Web experience management solutions will help deliver more targeted interactions to ensure increased customer loyalty while meeting sales and business objectives. 3. Real composite applications will be widely adopted. We expect organizations to move from the concept of a single "uber-portal" that encompasses all the necessary features to a more modular, component-based concept for composite applications. This approach is now possible as IT and power users are empowered to assemble new, purpose-built composite applications quickly from existing components. 4. Records management will drive ECM consolidation. We continue to see a significant shift in the approach to records management. Several years ago initiatives were focused on overlaying records management across a set of electronic repositories and physical storage locations. We believe federated records management will continue, but we also expect to see records management driving conversations around single-platform content management consolidation. 5. Organizations will demand ECM at extreme scale. We have already seen a trend within IT organizations to provide a common, highly scalable infrastructure to consolidate and support content and information needs. But as data sizes grow exponentially, ECM at an extreme scale is likely to spread at unprecedented speeds this year. This makes sense as regulations and transparency requirements rise. The model in which ECM and lightweight CMS systems provide basic content services such as check-in, update, delete, and search has converged around a set of industry best practices and has even been coded into new industry standards such as content management interoperability services. As these services converge and the demand for them accelerates, organizations are beginning to rationalize investments into a single, highly scalable infrastructure. Is your organization ready for Enterprise 2.0 in 2011? Learn more.

  Read the article

• Impressions of Pivotal Tracker

  Pivotal Tracker is a free, online agile project management system. Ive been using it recently to better communicate to customers about the current state of our project. In Pivotal Tracker, the unit of work is a story and stories are arranged into iterations or delivery cycles. Stories can be any level of granularity you want, but the idea is to use stories to communicate clearly to customers, so you dont want to write a novel. You especially dont want to write a list of detailed programming tasks. A good story for a point of sale system might be: Allow managers to override the price of an item while ringing up a customer. A less useful story: Script out the process of adding a manager flag to the user table and stage that script into the deploy directory. Stories are estimated using a point scale, by default 1, 2 or 3. Iterations are then automatically laid out by combining enough tasks to fill the point total for that period of time. You have to start with a guess on how many points your team can do in an iteration, then adjust with real data as you complete iterations. This is basic agile methodology, but where Pivotal Tracker adds value is that it automatically and graphically lays out iterations for you on your project site. This makes communication and planning easy. Compiling release notes is no longer painful as it has been clear from the outset what work is going on. While I much prefer Pivotal Trackers customer facing interface over what we used previously (TFS), I see a couple of gaps. First, I have not able to make much headway with the reporting tools. Despite my complaints about TFS, it can produce some nice reports. Second, its not clear where if at all, Id keep track of purely internal tasks. Im talking about server maintenance, cleaning up source control, checking back on some code which you never quite felt right about. Theres no purpose in cluttering up an iteration backlog with these items, but if you dont track them, you lose them. Im not sure what a good answer for that is. One gap I thought Id see, which I dont, is more granular dev tasks. If Im implementing a story, Ill write out the steps and track my progress, but really, those steps arent useful to anybody but me. The only time Ive found that level of detail really useful is when my tasks are defined at too high a level anyway or when Im working with someone who needs more coaching and might not be able to finish a story in time without some scaffolding to get them going. You can learn more about Pivotal Tracker at: http://www.pivotaltracker.com/learnmore.   --- Relevant Links --- A good intro to stories: http://www.agilemodeling.com/artifacts/userStory.htmDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Oracle support note for Leap Second Hang problem that may result into 100% CPU utilization in Linux environment

  - by Anand Akela

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} On or around July 1, 2012, Oracle has become aware of an issue on Linux distributions resulting from the introduction of the leap second; this is causing problems for some customers.  Leap seconds may be introduced at the end of June or December in a calendar year, like 2012, as necessary to maintain time standards. Servers hosting Oracle products which are clients of an NTP server (Network Time Protocol) may be particularly susceptible to this issue as the NTP server is updated. Linux distributions which may be affected include Oracle Enterprise Linux, Red Hat Enterprise Linux, Oracle VM and Oracle Unbreakable Enterprise Kernel. Asianux 2 and 3, based on RHEL 4 and 5, may also be affected. One report of correction to high agent CPU using Note 1472421.1 on SLES11 has also been reported. Not all customers will be affected, but those, who are affected, may observe higher than normal CPU consumption on their Linux environments where JVM's are utilized.  In Oracle Enterprise Manager ( EM ) , this problem can manifest itself as high CPU consumption with the EM Agent process (which runs on a JVM in EM 12c, for instance).  It is possible that the OMS is also affected. We would advise customers to review the description of this problem in MOS Note 1472651.1 and take action if they observe that their environment is affected. Contributed by Andrew Bulloch , Director, Application Systems Management Products

  Read the article

• Oracle MAA Part 1: When One Size Does Not Fit All

  - by JoeMeeks

  The good news is that Oracle Maximum Availability Architecture (MAA) best practices combined with Oracle Database 12c (see video) introduce first-in-the-industry database capabilities that truly make unplanned outages and planned maintenance transparent to users. The trouble with such good news is that Oracle’s enthusiasm in evangelizing its latest innovations may leave some to wonder if we’ve lost sight of the fact that not all database applications are created equal. Afterall, many databases don’t have the business requirements for high availability and data protection that require all of Oracle’s ‘stuff’. For many real world applications, a controlled amount of downtime and/or data loss is OK if it saves money and effort. Well, not to worry. Oracle knows that enterprises need solutions that address the full continuum of requirements for data protection and availability. Oracle MAA accomplishes this by defining four HA service level tiers: BRONZE, SILVER, GOLD and PLATINUM. The figure below shows the progression in service levels provided by each tier. Each tier uses a different MAA reference architecture to deploy the optimal set of Oracle HA capabilities that reliably achieve a given service level (SLA) at the lowest cost.  Each tier includes all of the capabilities of the previous tier and builds upon the architecture to handle an expanded fault domain. Bronze is appropriate for databases where simple restart or restore from backup is ‘HA enough’. Bronze is based upon a single instance Oracle Database with MAA best practices that use the many capabilities for data protection and HA included with every Oracle Enterprise Edition license. Oracle-optimized backups using Oracle Recovery Manager (RMAN) provide data protection and are used to restore availability should an outage prevent the database from being able to restart. Silver provides an additional level of HA for databases that require minimal or zero downtime in the event of database instance or server failure as well as many types of planned maintenance. Silver adds clustering technology - either Oracle RAC or RAC One Node. RMAN provides database-optimized backups to protect data and restore availability should an outage prevent the cluster from being able to restart. Gold raises the game substantially for business critical applications that can’t accept vulnerability to single points-of-failure. Gold adds database-aware replication technologies, Active Data Guard and Oracle GoldenGate, which synchronize one or more replicas of the production database to provide real time data protection and availability. Database-aware replication greatly increases HA and data protection beyond what is possible with storage replication technologies. It also reduces cost while improving return on investment by actively utilizing all replicas at all times. Platinum introduces all of the sexy new Oracle Database 12c capabilities that Oracle staff will gush over with great enthusiasm. These capabilities include Application Continuity for reliable replay of in-flight transactions that masks outages from users; Active Data Guard Far Sync for zero data loss protection at any distance; new Oracle GoldenGate enhancements for zero downtime upgrades and migrations; and Global Data Services for automated service management and workload balancing in replicated database environments. Each of these technologies requires additional effort to implement. But they deliver substantial value for your most critical applications where downtime and data loss are not an option. The MAA reference architectures are inherently designed to address conflicting realities. On one hand, not every application has the same objectives for availability and data protection – the Not One Size Fits All title of this blog post. On the other hand, standard infrastructure is an operational requirement and a business necessity in order to reduce complexity and cost. MAA reference architectures address both realities by providing a standard infrastructure optimized for Oracle Database that enables you to dial-in the level of HA appropriate for different service level requirements. This makes it simple to move a database from one HA tier to the next should business requirements change, or from one hardware platform to another – whether it’s your favorite non-Oracle vendor or an Oracle Engineered System. Please stay tuned for additional blog posts in this series that dive into the details of each MAA reference architecture. Meanwhile, more information on Oracle HA solutions and the Maximum Availability Architecture can be found at: Oracle Maximum Availability Architecture - Webcast Maximize Availability with Oracle Database 12c - Technical White Paper

  Read the article

• Book Review (Book 12) - 20 Master Plots

  - by BuckWoody

  This is a continuation of the books I challenged myself to read to help my career - one a month, for a year. You can read my first book review here, and the entire list is here. The book I chose for May 2012 was:20 Master Plots by Ronald B. Tobias. This is my final book review - at least for this year. I'll explain what I've learned in this book in particular, and in the last twelve months in general. Why I chose this book: Stories and themes are part of software, presenting, and working in teams. This book claims there are only 20 plots, ever. I wanted to find out. What I learned: Probably my most favorite read of the year. Deceptively small, amazingly insightful. The premise is that there are only a few "base" themes, and that once you learn them you can put together an interesting set of stories on most any topic. Yes, the author admits that this number has been different throughout history - some have said 50, others 14, and still others claim only one or two basic plots. This doesn't change the fact that you can build very complex stories from a simple set of circumstances and characters. Be warned - if you read this book it takes away much of the wonder from almost every movie or book you'll read from here on! I loved it. My favorite part is that the author gives you exercises to build stories, right from the start. I've actually used these as the start of a meeting to foster creativity. Amazing stuff. One of my favorite sections of the book deals with plot and story. Plot: The king died, and the queen died. Story: The king died, and the queen died of heartbreak. Add one or two words, and you have the essence of storytelling. A highly recommended read, for all folks of all ages. You'll like it, your spouse will like it, and your kids will like it. I learned to be a better storyteller, and it helped me understand that plots and stories are not just things in books - they are a direct reflection of human nature. That makes me a better manager of myself and others.   And this is the last of the reviews - at least for this year. I probably won't post many more book reviews here, but I will keep up the practice. As a reminder, the goal was to select 12 books that will help you reach your career goals. They don't have to be technical, or even apply directly to your job - but they do need to be books that you mindfully select as getting you closer to what you want to be. Each month, jot down what you learned from the work. And see if it doesn't in fact get you closer to your goals. These readings helped me - I got a promotion this year, and I attribute at least some of that to the things I learned.

  Read the article

• ArchBeat Link-o-Rama Top 10 for October 2012

  - by Bob Rhubart

  The Top 10 most popular items shared on the OTN ArchBeat Facebook Page for October 2012. OAM/OVD JVM Tuning | @FusionSecExpert Vinay from the Oracle Fusion Middleware Architecture Group (known as the A-Team) shares a process for analyzing and improving performance in Oracle Virtual Directory and Oracle Access Manager. SOA Galore: New Books for Technical Eyes Only Shake up up your technical skills with this trio of new technical books from community members covering SOA and BPM. Clustering ODI11g for High-Availability Part 1: Introduction and Architecture | Richard Yeardley "JEE agents can be deployed alongside, or instead of, standalone agents," says Rittman Meade's Richard Yeardley. "But there is one key advantage in using JEE agents and WebLogic – when you deploy JEE agents as part of a WebLogic cluster they can be configured together to form a high availability cluster." Learn more in Yeardley's extensive post. Solving Big Problems in Our 21st Century Information Society | Irving Wladawsky-Berger "I believe that the kind of extensive collaboration between the private sector, academia and government represented by the Internet revolution will be the way we will generally tackle big problems in the 21st century. Just as with the Internet, governments have a major role to play as the catalyst for many of the big projects that the private sector will then take forward and exploit. The need for high bandwidth, robust national broadband infrastructures is but one such example." -- Irving Wladawsky-Berger Eventually, 90% of tech budgets will be outside IT departments | ZDNet Another interesting post from ZDNet blogger Joe McKendrick about changing roles in IT. ADF Mobile - Login Functionality | Andrejus Baranovskis "The new ADF Mobile approach with native deployment is cool when you want to access phone functionality (camera, email, sms and etc.), also when you want to build mobile applications with advanced UI," reports Oracle ACE Director Andrejus Baranovskis. Podcast: Are You Future Proof? - Part 2 In Part 2, practicing architects and Oracle ACE Directors Ron Batra (AT&T), Basheer Khan (Innowave Technology), and Ronald van Luttikhuizen (Vennster) discuss re-tooling one’s skill set to reflect changes in enterprise IT, including the knowledge to steer stakeholders around the hype to what's truly valuable. ADF Mobile Custom Javascript — iFrame Injection | John Brunswick The ADF Mobile Framework provides a range of out of the box components to add within your AMX pages, according to John Brunswick. But what happens when "an out of the box component does not directly fulfill your development need? What options are available to extend your application interface?" John has an answer. Oracle Solaris 11.1 update focuses on database integration, cloud | Mark Fontecchio TechTarget editor Mark Fontecchio reports on the recent Oracle Solaris 11.1 release, with comments from IDC's Al Gillen. Architects Matter: Making sense of the people who make sense of enterprise IT Why do architects matter? Oracle Enterprise Architect Eric Stephens suggests that you ask yourself this question the next time you take the elevator to the Oracle offices on the 45th floor of the Willis Tower in Chicago, Illinois (or any other skyscraper, for that matter). If you had to take the stairs to get to those offices, who would you blame? "You get the picture," he says. "Architecture is essential for any necessarily complex structure, be it a building or an enterprise." (Read the article) Thought for the Day "I will contend that conceptual integrity is the most important consideration in system design. It is better to have a system omit certain anomalous features and improvements, but to reflect one set of design ideas, than to have one that contains many good but independent and uncoordinated ideas." — Frederick P. Brooks Source: SoftwareQuotes.com

  Read the article

• Hyperion EPM 11.1.2.3 Webcast Tutorials

  - by Mike.Hallett(at)Oracle-BI&EPM

  Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} These LIVE presentation Webcast Tutorials for Partners will be delivered in August 2013: Oracle Hyperion Planning on Exalytics In-Memory Machine - August 6, 2013 Oracle Hyperion Tax Provision - August 8, 2013 Oracle Planning and Budgeting Cloud Service - August 13, 2013 Go here for more details and to register for these. There are also new updated Webcast Tutorials for Oracle Partners in our EPM 11.1.2.3 Update Series: Oracle Hyperion Planning 11.1.2.3 (PS3) Oracle Hyperion Calculation Manager 11.1.2.2 Refresher and 11.1.2.3 (PS3) NEW Oracle Data Relationship Management 11.1.2.3 (PS3) NEW Oracle Hyperion Financial Data Quality Management 11.1.2.3 (PS3) NEW Oracle Hyperion Financial Close Suite 11.1.2.3 (PS3) NEW Oracle Hyperion Profitability & Cost Management 11.1.2.3 (PS3) Introducing Oracle Data Relationship Governance (DRG) Also note new content for Oracle BI Applications 11g with ODI: NEW Overview and Architecture of Oracle BI Applications 11.1.1.7.1 for ODI NEW Configuring Oracle BI Applications 11.1.1.7.1 for ODI These are all part of the compilation of Oracle BI/EPM online tutorials and webinars for Partners, where you can find many topics are covered. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

< Previous Page | 346 347 348 349 350 351 352 353 354 355 356 357  | Next Page >