Search Results

Search found 10033 results on 402 pages for 'execution speed'.

Page 351/402 | < Previous Page | 347 348 349 350 351 352 353 354 355 356 357 358  | Next Page >

• IIS 7.5 Error 1007

  - by darkdog

  I have a Windows 2008 R2 Virtual Server. I removed the "Default Web Site" using IIS Manager and now all my other sites now report an error saying they can't access the site (or something similar). I thought I could just remove the role, re-install IIS again and start with a clean slate. After I re-installed IIS it's now reporting the following error in the event log: The World Wide Web Publishing Service (WWW service) failed to register the URL prefix of "http://www.mash-guild.com:80:192.168.245.132/" for the website of "4". The required network connectivity may already be used. The site has been disabled. The data field contains the error number. This is the full version with the german error note (I'm from germany): Der WWW-Publishingdienst (WWW-Dienst) konnte das URL-Präfix "http://www.mash-guild.com:80:192.168.245.132/" für die Website "4" nicht registrieren. Die erforderliche Netzwerkverbindung wird möglicherweise bereits verwendet. Die Website wurde deaktiviert. Das Datenfeld enthält die Fehlernummer. Ereignis-XML: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-IIS-W3SVC" Guid="{05448E22-93DE-4A7A-BBA5-92E27486A8BE}" EventSourceName="W3SVC" /> <EventID Qualifiers="49152">1007</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2011-03-26T16:14:56.000000000Z" /> <EventRecordID>1435</EventRecordID> <Correlation /> <Execution ProcessID="0" ThreadID="0" /> <Channel>System</Channel> <Computer>WIN-DCJ8SN0QI5J</Computer> <Security /> </System> <EventData> <Data Name="UrlPrefix">http://www.mash-guild.com:80:192.168.245.132/</Data> <Data Name="SiteID">4</Data> <Binary>B7000780</Binary> </EventData> </Event> I would like to know if there is a way to fix this or just get back to the IIS + Server settings I had just after I installed windows 2008 ?

  Read the article

• Windows 7 extremely slow login, exchange performance, printer enumeration, etc...

  - by Jeff

  Background: I have a fresh copy of Windows 7 Professional x64 on a Dell Latitude E6500. The laptop has 8GB RAM, 250GB drive, and all Intel peripherals (net/wifi/graphics). All available Windows updates, as well as hardware drivers are installed. The IT folks where I work joined the computer to our Windows 2003-based Active Directory domain. There are no errors in any logs that we've looked at, and Group Policy templates appear to have applied properly. Problem: Every time I turn on or reboot the computer, it takes between 2 to 10 (all times are actual) minutes after successfully typing my username/password to get to my desktop. My login script does not always run. Sometimes I get a black screen, and a couple of minutes later the login script will pop up and take up to 10 minutes to complete. I can get around this by hitting cntrl-shift-esc and running explorer.exe from the Task Manager. The login script continues to hang, but I can minimize it and go on about my business. Either way, it generally throws errors prior to completing. I often get slow or failed connectivity to Exchange via Outlook. When I bring up printer dialogs, they take several minutes to populate, and block the calling app while doing so. Copies to SMB shares are very slow. On my home network, everything works fine. On both the work network and home network, I can use remote internet resources just fine. Web pages pull up, remote VPN's are fine, I can max out bandwidth on SpeakEasy Speed Test. I can get almost max bandwidth transferring FTP/HTTP over a LAN. Another symptom of the problem is that when I first log in, the work network shows as "Identifying" for a long time in the Network and Sharing Center, and will often then change to the name of the work domain, but say "Unauthenticated Network". Note that this computer previously ran Windows Vista with none of these problems. Attempts to Fix: Installed the Win7 admin pack Uninstalled/reinstalled all hardware drivers Verified Active Directory DNS settings (Vista works relatively well on the same network) Reset all TCP/IP settings on all adapters using the netsh commands to do so Disabled ipv6 on all adapters Disable wifi adapter while on work network Locked the network card to 100/Full, 1000/Full; also tried Auto Added various important addresses to hosts file (exchange, dns, ad) -- removed when didn't help My background is a jpeg (sounds unrelated but there is apparently a win7 login bug related to solid color background) More I have forgotten The IT staff at my company indicated they believe this is due to having Windows 2003 AD servers and not having any Windows 2008 R2 AD servers. Other than that, they have no advice or assistance to offer other than a rebuild (already tried that once with similar symptoms), or downgrade to Vista. Any thoughts out there?

  Read the article

• Double Layer DVD+R burning problem - I/O Error

  - by Mehper C. Palavuzlar

  I have a modern PC (Quad Core CPU, 4 GB RAM, Win7 Home Premium 64-bit) but I have a problem with burning .dvd images to Double Layer (8.5 GB) DVDs. I wasted too many DVD+R DL discs but to no avail. Here is a short explanation of what I did: I'm using ImgBurn v2.5.0.0 (latest version). I'm trying to burn an image file (.dvd) which is together with the related .iso file in the same folder. In ImgBurn, I select the file with .dvd extension, and set writing speed to 2.4x. Burning process starts normally, but around 7% of the process, it gives a I/O Write Error, which is as follows: I wasted 3 discs (Magic, Made in Taiwan, DVD+R DL, 8.5 GB) trying the same thing. My DVD writer is LG GH22NP20 with IDE connection type. I updated its firmware from 1.04 to 2.00 but no success in burning again. Then my cousin brought his LG (an older model) which, he claims, was successful in writing DL discs with the same brand (Magic). I plugged off my LG and plugged the older one in, and tried to burn the image again. It also gave an I/O Error even without standing till 7%. I tried another burning program (CloneCD), but failed again. Then I bought other brands (TDK and VERBATIM) and tried to burn the image. Burning process started successfully, but around 14% (for Verbatim) and 25% (for TDK) failed again. Here is a screeny from ImgBurn: I've burned lots of 4.7 GB DVD+Rs and DVD-Rs successfully, even without a single error, with this LG DVD writer, but this case is very bothering for me. What should I do? Should I buy a new DVD writer other than LG? Could this be related to Windows or my hardware configuration? Thanks for your help. Edit: My burner works on my cousin's machine. So the problem must be related to my system. What could be the reason? Latest news: I borrowed an external USB DVD writer from a friend, which is PHILIPS SPD3000CC (an old model). Guess what! It's burning DVD+R DLs successfully! How come an internal DVD writer of a brand new computer system cannot burn DL DVDs? Now I'm considering buying a new internal DVD writer with not IDE, but SATA connection...

  Read the article

• Pulseaudio is no longer working in Debian Squeeze: 'Failed to open module "module-combine-sink": file not found'

  - by mattalexx

  I'm having a problem with pulseaudio. My machine crashed, and when I rebooted and ran pavucontrol, I got a "Connection Failed: Connection refused" dialog. When I run pulseaudio --log-level=info --log-target=stderr from the command line, I get the following output: [...] I: alsa-util.c: Error opening PCM device front:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device hw:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device iec958:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device iec958:1: No such file or directory I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device hw:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device front:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device hw:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device iec958:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device iec958:1: No such file or directory I: card.c: Created 0 "alsa_card.usb-FiiO_DigiHug_USB_Audio-01-Audio" I: alsa-sink.c: Successfully opened device front:1. I: alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo). I: alsa-sink.c: Successfully enabled mmap() mode. I: alsa-sink.c: Successfully enabled timer-based scheduling mode. I: (alsa-lib)control.c: Invalid CTL front:1 I: alsa-mixer.c: Unable to attach to mixer front:1: No such file or directory I: alsa-mixer.c: Successfully attached to mixer 'hw:1' W: alsa-mixer.c: Your kernel driver is broken: it reports a volume range from 0.00 dB to 0.00 dB which makes no sense. I: module-device-restore.c: Restoring volume for sink alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo. I: sink.c: Created sink 0 "alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right I: sink.c: alsa.resolution_bits = "16" I: sink.c: device.api = "alsa" I: sink.c: device.class = "sound" I: sink.c: alsa.class = "generic" I: sink.c: alsa.subclass = "generic-mix" I: sink.c: alsa.name = "USB Audio" I: sink.c: alsa.id = "USB Audio" I: sink.c: alsa.subdevice = "0" I: sink.c: alsa.subdevice_name = "subdevice #0" I: sink.c: alsa.device = "0" I: sink.c: alsa.card = "1" I: sink.c: alsa.card_name = "DigiHug USB Audio" I: sink.c: alsa.long_card_name = "FiiO DigiHug USB Audio at usb-0000:00:1a.0-1.2, full speed" I: sink.c: alsa.driver_name = "snd_usb_audio" I: sink.c: device.bus_path = "pci-0000:00:1a.0-usb-0:1.2:1.1" I: sink.c: sysfs.path = "/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/sound/card1" I: sink.c: udev.id = "usb-FiiO_DigiHug_USB_Audio-01-Audio" I: sink.c: device.bus = "usb" I: sink.c: device.vendor.id = "1852" I: sink.c: device.vendor.name = "GYROCOM C&C Co., LTD" I: sink.c: device.product.id = "7022" I: sink.c: device.product.name = "DigiHug_USB_Audio" I: sink.c: device.serial = "FiiO_DigiHug_USB_Audio" I: sink.c: device.string = "front:1" I: sink.c: device.buffering.buffer_size = "352800" I: sink.c: device.buffering.fragment_size = "176400" I: sink.c: device.access_mode = "mmap+timer" I: sink.c: device.profile.name = "analog-stereo" I: sink.c: device.profile.description = "Analog Stereo" I: sink.c: device.description = "DigiHug_USB_Audio Analog Stereo" I: sink.c: alsa.mixer_name = "USB Mixer" I: sink.c: alsa.components = "USB1852:7022" I: sink.c: module-udev-detect.discovered = "1" I: sink.c: device.icon_name = "audio-card-usb" I: source.c: Created source 0 "alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right I: source.c: device.description = "Monitor of DigiHug_USB_Audio Analog Stereo" I: source.c: device.class = "monitor" I: source.c: alsa.card = "1" I: source.c: alsa.card_name = "DigiHug USB Audio" I: source.c: alsa.long_card_name = "FiiO DigiHug USB Audio at usb-0000:00:1a.0-1.2, full speed" I: source.c: alsa.driver_name = "snd_usb_audio" I: source.c: device.bus_path = "pci-0000:00:1a.0-usb-0:1.2:1.1" I: source.c: sysfs.path = "/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/sound/card1" I: source.c: udev.id = "usb-FiiO_DigiHug_USB_Audio-01-Audio" I: source.c: device.bus = "usb" I: source.c: device.vendor.id = "1852" I: source.c: device.vendor.name = "GYROCOM C&C Co., LTD" I: source.c: device.product.id = "7022" I: source.c: device.product.name = "DigiHug_USB_Audio" I: source.c: device.serial = "FiiO_DigiHug_USB_Audio" I: source.c: device.string = "1" I: source.c: module-udev-detect.discovered = "1" I: source.c: device.icon_name = "audio-card-usb" I: alsa-sink.c: Using 2.0 fragments of size 176400 bytes (1000.00ms), buffer size is 352800 bytes (2000.00ms) I: alsa-sink.c: Time scheduling watermark is 20.00ms I: alsa-sink.c: Hardware volume ranges from 0 to 110. I: alsa-sink.c: Using hardware volume control. Hardware dB scale not supported. I: alsa-sink.c: Using hardware mute control. I: core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5. I: alsa-sink.c: Starting playback. I: module.c: Loaded "module-alsa-card" (index: #4; argument: "device_id="1" name="usb-FiiO_DigiHug_USB_Audio-01-Audio" card_name="alsa_card.usb-FiiO_DigiHug_USB_Audio-01-Audio" tsched=yes ignore_dB=no card_properties="module-udev-detect.discovered=1""). I: module-udev-detect.c: Card /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/sound/card1 (alsa_card.usb-FiiO_DigiHug_USB_Audio-01-Audio) module loaded. I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: alsa-util.c: Device hw:2 doesn't support 44100 Hz, changed to 8000 Hz. I: alsa-util.c: Failed to set hardware parameters on plug:front:2: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:hw:2: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:2: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:2: Invalid argument I: module-card-restore.c: Restoring profile for card alsa_card.usb-046d_08d7-01-U0x46d0x8d7. I: card.c: Created 1 "alsa_card.usb-046d_08d7-01-U0x46d0x8d7" I: module.c: Loaded "module-alsa-card" (index: #5; argument: "device_id="2" name="usb-046d_08d7-01-U0x46d0x8d7" card_name="alsa_card.usb-046d_08d7-01-U0x46d0x8d7" tsched=yes ignore_dB=no card_properties="module-udev-detect.discovered=1""). I: module-udev-detect.c: Card /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/sound/card2 (alsa_card.usb-046d_08d7-01-U0x46d0x8d7) module loaded. I: module-udev-detect.c: Found 3 cards. I: module.c: Loaded "module-udev-detect" (index: #6; argument: ""). I: module.c: Loaded "module-esound-protocol-unix" (index: #7; argument: ""). I: module.c: Loaded "module-native-protocol-unix" (index: #8; argument: ""). I: module-default-device-restore.c: Saved default sink 'alsa_output.pci-0000_00_1b.0.analog-surround-41' not existant, not restoring default sink setting. I: module-default-device-restore.c: Saved default source 'alsa_output.pci-0000_00_1b.0.analog-surround-41.monitor' not existant, not restoring default source setting. I: module.c: Loaded "module-default-device-restore" (index: #9; argument: ""). I: module.c: Loaded "module-rescue-streams" (index: #10; argument: ""). I: module.c: Loaded "module-always-sink" (index: #11; argument: ""). I: module.c: Loaded "module-intended-roles" (index: #12; argument: ""). I: module.c: Loaded "module-suspend-on-idle" (index: #13; argument: ""). I: client.c: Created 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session2" I: module.c: Loaded "module-console-kit" (index: #14; argument: ""). I: module.c: Loaded "module-position-event-sounds" (index: #15; argument: ""). I: module.c: Loaded "module-cork-music-on-phone" (index: #16; argument: ""). E: module.c: Failed to open module "module-combine-sink": file not found E: main.c: Module load failed. E: main.c: Failed to initialize daemon. I: module.c: Unloading "module-device-restore" (index: #0). I: module.c: Unloaded "module-device-restore" (index: #0). I: module.c: Unloading "module-stream-restore" (index: #1). I: module.c: Unloaded "module-stream-restore" (index: #1). I: module.c: Unloading "module-card-restore" (index: #2). I: module.c: Unloaded "module-card-restore" (index: #2). I: module.c: Unloading "module-augment-properties" (index: #3). I: module.c: Unloaded "module-augment-properties" (index: #3). I: module.c: Unloading "module-alsa-card" (index: #4). I: sink.c: Freeing sink 0 "alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo" I: source.c: Freeing source 0 "alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo.monitor" I: card.c: Freed 0 "alsa_card.usb-FiiO_DigiHug_USB_Audio-01-Audio" I: module.c: Unloaded "module-alsa-card" (index: #4). I: module.c: Unloading "module-alsa-card" (index: #5). I: card.c: Freed 1 "alsa_card.usb-046d_08d7-01-U0x46d0x8d7" I: module.c: Unloaded "module-alsa-card" (index: #5). I: module.c: Unloading "module-udev-detect" (index: #6). I: module.c: Unloaded "module-udev-detect" (index: #6). I: module.c: Unloading "module-esound-protocol-unix" (index: #7). I: module.c: Unloaded "module-esound-protocol-unix" (index: #7). I: module.c: Unloading "module-native-protocol-unix" (index: #8). I: module.c: Unloaded "module-native-protocol-unix" (index: #8). I: module.c: Unloading "module-default-device-restore" (index: #9). I: module.c: Unloaded "module-default-device-restore" (index: #9). I: module.c: Unloading "module-rescue-streams" (index: #10). I: module.c: Unloaded "module-rescue-streams" (index: #10). I: module.c: Unloading "module-always-sink" (index: #11). I: module.c: Unloaded "module-always-sink" (index: #11). I: module.c: Unloading "module-intended-roles" (index: #12). I: module.c: Unloaded "module-intended-roles" (index: #12). I: module.c: Unloading "module-suspend-on-idle" (index: #13). I: module.c: Unloaded "module-suspend-on-idle" (index: #13). I: module.c: Unloading "module-console-kit" (index: #14). I: client.c: Freed 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session2" I: module.c: Unloaded "module-console-kit" (index: #14). I: module.c: Unloading "module-position-event-sounds" (index: #15). I: module.c: Unloaded "module-position-event-sounds" (index: #15). I: module.c: Unloading "module-cork-music-on-phone" (index: #16). I: module.c: Unloaded "module-cork-music-on-phone" (index: #16). I: main.c: Daemon terminated. I believe the relevant part is this: E: module.c: Failed to open module "module-combine-sink": file not found E: main.c: Module load failed. E: main.c: Failed to initialize daemon. I tried uninstalling and reinstalling pulseaudio, I tried to find a way to install module-combine-sink. Nothing worked. I'm on a Debian Squeeze 32-bit machine. What can I do to fix this?

  Read the article

• JBoss AS 5: starts but can't connect (Windows, remote)

  - by Nuwan

  Hello I installed Jboss 5.0GA and Its works fine in localhost.But I want It to access through remote Machine.Then I bind my IP address to my server and started it.This is the command I used run.bat -b 10.17.62.63 Then the server Starts fine This is the console log when starting the server > =============================================================================== > > JBoss Bootstrap Environment > > JBOSS_HOME: C:\jboss-5.0.0.GA > > JAVA: C:\Program Files\Java\jdk1.6.0_34\bin\java > > JAVA_OPTS: -Dprogram.name=run.bat -server -Xms128m -Xmx512m > -XX:MaxPermSize=25 6m -Dorg.jboss.resolver.warning=true -Dsun.rmi.dgc.client.gcInterval=3600000 -Ds un.rmi.dgc.server.gcInterval=3600000 > > CLASSPATH: C:\jboss-5.0.0.GA\bin\run.jar > > =============================================================================== > > run.bat: unused non-option argument: ûb run.bat: unused non-option > argument: 0.0.0.0 13:43:38,179 INFO [ServerImpl] Starting JBoss > (Microcontainer)... 13:43:38,179 INFO [ServerImpl] Release ID: JBoss > [Morpheus] 5.0.0.GA (build: SV NTag=JBoss_5_0_0_GA date=200812041714) > 13:43:38,179 INFO [ServerImpl] Bootstrap URL: null 13:43:38,179 INFO > [ServerImpl] Home Dir: C:\jboss-5.0.0.GA 13:43:38,179 INFO > [ServerImpl] Home URL: file:/C:/jboss-5.0.0.GA/ 13:43:38,195 INFO > [ServerImpl] Library URL: file:/C:/jboss-5.0.0.GA/lib/ 13:43:38,195 > INFO [ServerImpl] Patch URL: null 13:43:38,195 INFO [ServerImpl] > Common Base URL: file:/C:/jboss-5.0.0.GA/common/ > > 13:43:38,195 INFO [ServerImpl] Common Library URL: > file:/C:/jboss-5.0.0.GA/comm on/lib/ 13:43:38,195 INFO [ServerImpl] > Server Name: default 13:43:38,195 INFO [ServerImpl] Server Base Dir: > C:\jboss-5.0.0.GA\server 13:43:38,195 INFO [ServerImpl] Server Base > URL: file:/C:/jboss-5.0.0.GA/server/ > > 13:43:38,210 INFO [ServerImpl] Server Config URL: > file:/C:/jboss-5.0.0.GA/serve r/default/conf/ 13:43:38,210 INFO > [ServerImpl] Server Home Dir: C:\jboss-5.0.0.GA\server\defaul t > 13:43:38,210 INFO [ServerImpl] Server Home URL: > file:/C:/jboss-5.0.0.GA/server/ default/ 13:43:38,210 INFO > [ServerImpl] Server Data Dir: C:\jboss-5.0.0.GA\server\defaul t\data > 13:43:38,210 INFO [ServerImpl] Server Library URL: > file:/C:/jboss-5.0.0.GA/serv er/default/lib/ 13:43:38,210 INFO > [ServerImpl] Server Log Dir: C:\jboss-5.0.0.GA\server\default \log > 13:43:38,210 INFO [ServerImpl] Server Native Dir: > C:\jboss-5.0.0.GA\server\defa ult\tmp\native 13:43:38,210 INFO > [ServerImpl] Server Temp Dir: C:\jboss-5.0.0.GA\server\defaul t\tmp > 13:43:38,210 INFO [ServerImpl] Server Temp Deploy Dir: > C:\jboss-5.0.0.GA\server \default\tmp\deploy 13:43:39,710 INFO > [ServerImpl] Starting Microcontainer, bootstrapURL=file:/C:/j > boss-5.0.0.GA/server/default/conf/bootstrap.xml 13:43:40,851 INFO > [VFSCacheFactory] Initializing VFSCache [org.jboss.virtual.pl > ugins.cache.IterableTimedVFSCache] 13:43:40,866 INFO > [VFSCacheFactory] Using VFSCache [IterableTimedVFSCache{lifet > ime=1800, resolution=60}] 13:43:41,616 INFO [CopyMechanism] VFS temp > dir: C:\jboss-5.0.0.GA\server\defaul t\tmp 13:43:41,648 INFO > [ZipEntryContext] VFS force nested jars copy-mode is enabled. > > 13:43:44,288 INFO [ServerInfo] Java version: 1.6.0_34,Sun > Microsystems Inc. 13:43:44,288 INFO [ServerInfo] Java VM: Java > HotSpot(TM) Server VM 20.9-b04,Sun Microsystems Inc. 13:43:44,288 > INFO [ServerInfo] OS-System: Windows XP 5.1,x86 13:43:44,569 INFO > [JMXKernel] Legacy JMX core initialized 13:43:50,148 INFO > [ProfileServiceImpl] Loading profile: default from: org.jboss > .system.server.profileservice.repository.SerializableDeploymentRepository@e72f0c > (root=C:\jboss-5.0.0.GA\server, > key=org.jboss.profileservice.spi.ProfileKey@143b > 82c3[domain=default,server=default,name=default]) 13:43:50,148 INFO > [ProfileImpl] Using repository:org.jboss.system.server.profil > eservice.repository.SerializableDeploymentRepository@e72f0c(root=C:\jboss-5.0.0. > GA\server, > key=org.jboss.profileservice.spi.ProfileKey@143b82c3[domain=default,s > erver=default,name=default]) 13:43:50,148 INFO [ProfileServiceImpl] > Loaded profile: ProfileImpl@8b3bb3{key=o > rg.jboss.profileservice.spi.ProfileKey@143b82c3[domain=default,server=default,na > me=default]} 13:43:54,804 INFO [WebService] Using RMI server > codebase: http://127.0.0.1:8083 / 13:44:12,147 INFO [CXFServerConfig] > JBoss Web Services - Stack CXF Runtime Serv er 13:44:12,147 INFO > [CXFServerConfig] 3.1.2.GA 13:44:29,788 INFO > [Ejb3DependenciesDeployer] Encountered deployment AbstractVFS > DeploymentContext@29776073{vfszip:/C:/jboss-5.0.0.GA/server/default/deploy/myE-e > jb.jar} 13:44:29,819 INFO [Ejb3DependenciesDeployer] Encountered > deployment AbstractVFS > DeploymentContext@29776073{vfszip:/C:/jboss-5.0.0.GA/server/default/deploy/myE-e > jb.jar} 13:44:29,819 INFO [Ejb3DependenciesDeployer] Encountered > deployment AbstractVFS > DeploymentContext@29776073{vfszip:/C:/jboss-5.0.0.GA/server/default/deploy/myE-e > jb.jar} 13:44:29,819 INFO [Ejb3DependenciesDeployer] Encountered > deployment AbstractVFS > DeploymentContext@29776073{vfszip:/C:/jboss-5.0.0.GA/server/default/deploy/myE-e > jb.jar} 13:44:37,116 INFO [JMXConnectorServerService] JMX Connector > server: service:jmx > :rmi://127.0.0.1/jndi/rmi://127.0.0.1:1090/jmxconnector 13:44:38,022 > INFO [MailService] Mail Service bound to java:/Mail 13:44:43,162 WARN > [JBossASSecurityMetadataStore] WARNING! POTENTIAL SECURITY RI SK. It > has been detected that the MessageSucker component which sucks > messages f rom one node to another has not had its password changed > from the installation d efault. Please see the JBoss Messaging user > guide for instructions on how to do this. 13:44:43,209 WARN > [AnnotationCreator] No ClassLoader provided, using TCCL: org. > jboss.managed.api.annotation.ManagementComponent 13:44:43,600 INFO > [TransactionManagerService] JBossTS Transaction Service (JTA version) > - JBoss Inc. 13:44:43,600 INFO [TransactionManagerService] Setting up property manager MBean and JMX layer 13:44:44,366 INFO > [TransactionManagerService] Initializing recovery manager 13:44:44,678 > INFO [TransactionManagerService] Recovery manager configured > 13:44:44,678 INFO [TransactionManagerService] Binding > TransactionManager JNDI R eference 13:44:44,787 INFO > [TransactionManagerService] Starting transaction recovery man ager > 13:44:46,428 INFO [Http11Protocol] Initializing Coyote HTTP/1.1 on > http-127.0.0 .1-8080 13:44:46,459 INFO [AjpProtocol] Initializing > Coyote AJP/1.3 on ajp-127.0.0.1-80 09 13:44:46,459 INFO > [StandardService] Starting service jboss.web 13:44:46,475 INFO > [StandardEngine] Starting Servlet Engine: JBoss Web/2.1.1.GA > 13:44:46,616 INFO [Catalina] Server startup in 350 ms 13:44:46,709 > INFO [TomcatDeployment] deploy, ctxPath=/web-console, vfsUrl=manag > ement/console-mgr.sar/web-console.war 13:44:48,553 INFO > [TomcatDeployment] deploy, ctxPath=/juddi, vfsUrl=juddi-servi > ce.sar/juddi.war 13:44:48,678 INFO [RegistryServlet] Loading jUDDI > configuration. 13:44:48,694 INFO [RegistryServlet] Resources loaded > from: /WEB-INF/juddi.prope rties 13:44:48,709 INFO [RegistryServlet] > Initializing jUDDI components. 13:44:48,991 INFO [TomcatDeployment] > deploy, ctxPath=/invoker, vfsUrl=http-invo ker.sar/invoker.war > 13:44:49,162 INFO [TomcatDeployment] deploy, ctxPath=/jbossws, > vfsUrl=jbossws.s ar/jbossws-management.war 13:44:49,475 INFO > [RARDeployment] Required license terms exist, view vfszip:/C: > /jboss-5.0.0.GA/server/default/deploy/jboss-local-jdbc.rar/META-INF/ra.xml > 13:44:49,569 INFO [RARDeployment] Required license terms exist, view > vfszip:/C: > /jboss-5.0.0.GA/server/default/deploy/jboss-xa-jdbc.rar/META-INF/ra.xml > 13:44:49,741 INFO [RARDeployment] Required license terms exist, view > vfszip:/C: > /jboss-5.0.0.GA/server/default/deploy/jms-ra.rar/META-INF/ra.xml > 13:44:49,819 INFO [RARDeployment] Required license terms exist, view > vfszip:/C: > /jboss-5.0.0.GA/server/default/deploy/mail-ra.rar/META-INF/ra.xml > 13:44:49,912 INFO [RARDeployment] Required license terms exist, view > vfszip:/C: > /jboss-5.0.0.GA/server/default/deploy/quartz-ra.rar/META-INF/ra.xml > 13:44:50,069 INFO [SimpleThreadPool] Job execution threads will use > class loade r of thread: main 13:44:50,115 INFO [QuartzScheduler] > Quartz Scheduler v.1.5.2 created. 13:44:50,131 INFO [RAMJobStore] > RAMJobStore initialized. 13:44:50,131 INFO [StdSchedulerFactory] > Quartz scheduler 'DefaultQuartzSchedule r' initialized from default > resource file in Quartz package: 'quartz.properties' > > 13:44:50,131 INFO [StdSchedulerFactory] Quartz scheduler version: > 1.5.2 13:44:50,131 INFO [QuartzScheduler] Scheduler DefaultQuartzScheduler_$_NON_CLUS TERED started. 13:44:51,194 INFO > [ConnectionFactoryBindingService] Bound ConnectionManager 'jb > oss.jca:service=DataSourceBinding,name=DefaultDS' to JNDI name > 'java:DefaultDS' 13:44:51,819 WARN [QuartzTimerServiceFactory] sql > failed: CREATE TABLE QRTZ_JOB > _DETAILS(JOB_NAME VARCHAR(80) NOT NULL, JOB_GROUP VARCHAR(80) NOT NULL, DESCRIPT ION VARCHAR(120) NULL, JOB_CLASS_NAME VARCHAR(128) NOT > NULL, IS_DURABLE VARCHAR( 1) NOT NULL, IS_VOLATILE VARCHAR(1) NOT > NULL, IS_STATEFUL VARCHAR(1) NOT NULL, R EQUESTS_RECOVERY VARCHAR(1) > NOT NULL, JOB_DATA BINARY NULL, PRIMARY KEY (JOB_NAM E,JOB_GROUP)) > 13:44:51,912 INFO [SimpleThreadPool] Job execution threads will use > class loade r of thread: main 13:44:51,928 INFO [QuartzScheduler] > Quartz Scheduler v.1.5.2 created. 13:44:51,928 INFO [JobStoreCMT] > Using db table-based data access locking (synch ronization). > 13:44:51,944 INFO [JobStoreCMT] Removed 0 Volatile Trigger(s). > 13:44:51,944 INFO [JobStoreCMT] Removed 0 Volatile Job(s). > 13:44:51,944 INFO [JobStoreCMT] JobStoreCMT initialized. 13:44:51,944 > INFO [StdSchedulerFactory] Quartz scheduler 'JBossEJB3QuartzSchedu > ler' initialized from an externally provided properties instance. > 13:44:51,959 INFO [StdSchedulerFactory] Quartz scheduler version: > 1.5.2 13:44:51,959 INFO [JobStoreCMT] Freed 0 triggers from 'acquired' / 'blocked' st ate. 13:44:51,975 INFO [JobStoreCMT] > Recovering 0 jobs that were in-progress at the time of the last > shut-down. 13:44:51,975 INFO [JobStoreCMT] Recovery complete. > 13:44:51,975 INFO [JobStoreCMT] Removed 0 'complete' triggers. > 13:44:51,975 INFO [JobStoreCMT] Removed 0 stale fired job entries. > 13:44:51,990 INFO [QuartzScheduler] Scheduler > JBossEJB3QuartzScheduler_$_NON_CL USTERED started. 13:44:52,381 INFO > [ServerPeer] JBoss Messaging 1.4.1.GA server [0] started 13:44:52,569 > INFO [QueueService] Queue[/queue/DLQ] started, fullSize=200000, pa > geSize=2000, downCacheSize=2000 13:44:52,584 INFO [QueueService] > Queue[/queue/ExpiryQueue] started, fullSize=20 0000, pageSize=2000, > downCacheSize=2000 13:44:52,709 INFO [ConnectionFactory] Connector > bisocket://127.0.0.1:4457 has l easing enabled, lease period 10000 > milliseconds 13:44:52,709 INFO [ConnectionFactory] > org.jboss.jms.server.connectionfactory.Co nnectionFactory@1a8ac5e > started 13:44:52,725 WARN [ConnectionFactoryJNDIMapper] > supportsFailover attribute is t rue on connection factory: > jboss.messaging.connectionfactory:service=ClusteredCo nnectionFactory > but post office is non clustered. So connection factory will *no t* > support failover 13:44:52,725 WARN [ConnectionFactoryJNDIMapper] > supportsLoadBalancing attribute is true on connection factory: > jboss.messaging.connectionfactory:service=Cluste redConnectionFactory > but post office is non clustered. So connection factory wil l *not* > support load balancing 13:44:52,740 INFO [ConnectionFactory] > Connector bisocket://127.0.0.1:4457 has l easing enabled, lease period > 10000 milliseconds 13:44:52,740 INFO [ConnectionFactory] > org.jboss.jms.server.connectionfactory.Co nnectionFactory@1d43178 > started 13:44:52,740 INFO [ConnectionFactory] Connector > bisocket://127.0.0.1:4457 has l easing enabled, lease period 10000 > milliseconds 13:44:52,756 INFO [ConnectionFactory] > org.jboss.jms.server.connectionfactory.Co nnectionFactory@52728a > started 13:44:53,084 INFO [ConnectionFactoryBindingService] Bound > ConnectionManager 'jb > oss.jca:service=ConnectionFactoryBinding,name=JmsXA' to JNDI name > 'java:JmsXA' 13:44:53,225 INFO [TomcatDeployment] deploy, ctxPath=/, > vfsUrl=ROOT.war 13:44:53,553 INFO [TomcatDeployment] deploy, > ctxPath=/jmx-console, vfsUrl=jmx-c onsole.war 13:44:53,975 INFO > [TomcatDeployment] deploy, ctxPath=/TestService, vfsUrl=TestS > erviceEAR.ear/TestService.war 13:44:55,662 INFO [JBossASKernel] > Created KernelDeployment for: myE-ejb.jar 13:44:55,709 INFO > [JBossASKernel] installing bean: jboss.j2ee:jar=myE-ejb.jar,n > ame=RPSService,service=EJB3 13:44:55,725 INFO [JBossASKernel] with > dependencies: 13:44:55,725 INFO [JBossASKernel] and demands: > 13:44:55,725 INFO [JBossASKernel] > jboss.ejb:service=EJBTimerService 13:44:55,725 INFO [JBossASKernel] > and supplies: 13:44:55,725 INFO [JBossASKernel] > jndi:RPSService/remote 13:44:55,725 INFO [JBossASKernel] Added > bean(jboss.j2ee:jar=myE-ejb.jar,name=RP SService,service=EJB3) to > KernelDeployment of: myE-ejb.jar 13:44:56,772 INFO > [SessionSpecContainer] Starting jboss.j2ee:jar=myE-ejb.jar,na > me=RPSService,service=EJB3 13:44:56,803 INFO [EJBContainer] STARTED > EJB: com.monz.rpz.RPSService ejbName: RPSService 13:44:56,819 INFO > [JndiSessionRegistrarBase] Binding the following Entries in G lobal > JNDI: > > > 13:44:57,381 INFO [DefaultEndpointRegistry] register: > jboss.ws:context=myE-ejb, endpoint=RPSService 13:44:57,428 INFO > [DescriptorDeploymentAspect] Add Service id=RPSService > address=http://127.0.0.1:8080/myE-ejb/RPSService > implementor=com.monz.rpz.RPSService > invoker=org.jboss.wsf.stack.cxf.InvokerEJB3 mtomEnabled=false > 13:44:57,459 INFO [DescriptorDeploymentAspect] JBossWS-CXF > configuration genera ted: > file:/C:/jboss-5.0.0.GA/server/default/tmp/jbossws/jbossws-cxf1864137209199 > 110130.xml 13:44:57,569 INFO [TomcatDeployment] deploy, ctxPath=/myE-ejb, vfsUrl=myE-ejb.j ar 13:44:57,709 WARN [config] > Unable to process deployment descriptor for context '/myE-ejb' > 13:44:59,334 INFO [Http11Protocol] Starting Coyote HTTP/1.1 on > http-127.0.0.1-8 080 13:44:59,397 INFO [AjpProtocol] Starting Coyote > AJP/1.3 on ajp-127.0.0.1-8009 13:44:59,459 INFO [ServerImpl] JBoss > (Microcontainer) [5.0.0.GA (build: SVNTag= JBoss_5_0_0_GA > date=200812041714)] Started in 1m:21s:233ms But Still I cant connect to It when I Type my IP address in my browser thanks

  Read the article

• VMware Workstation reboot 32-bit host when starting 32/64-bit guest using VT-x

  - by Powerman

  I'm trying to start 64-bit guest (MacOSX and Windows7) on 32-bit host (Hardened Gentoo Linux, kernel 2.6.28-hardened-r9) using VMware Workstation (6.5.3.185404 and 7.0.1.227600). If VT-X disabled in BIOS, VMware refuse to start 64-bit guest (as expected). If VT-X enabled in BIOS, VMware start guest without complaining, but then, in about a second (I suppose as soon as guest try to switch on 64-bit) my host reboots (actually, it's more like reset - normal reboot procedure skipped and BIOS POST start immediately). My hardware is Core 2 Duo 6600 on ASUS P5B-Deluxe with latest stable BIOS 1101. I've power-cycled system, then enabled Vanderpool in BIOS. My CPU doesn't support Trusted Execution Technology, and there no way to disable it in BIOS. I've rebooted several times after that, sometimes with power-cycled, and ensure Vandertool is enabled in BIOS. I've also run VMware-guest64check-5.5.0-18463 tool, and it report "This host is capable of running a 64-bit guest operating system under this VMware product.". About a year ago I tried to disable hardened in kernel to ensure this isn't because of PaX/GrSecurity, but that doesn't help. I have not checked 32-bit guests with VT-X enabled yet, but without VT-X they works ok. ASUS provide "beta" BIOS updates, but according to their descriptions these updates doesn't fix this issue, so I'm not sure is it good idea to try it. My best guess now it's motherboard/BIOS bug. Any ideas? Update 1: I've tried to boot vt.iso provided at http://communities.vmware.com/docs/DOC-8978 and here is it report: CPU 0: VT is enabled on this core CPU 1: VT is enabled on this core Update 2: I've just tried to boot 32-bit guests (Windows7, Ubuntu9.04 and Gentoo) using all possible virtualization modes. In Automatic, Automatic with Replay, Binary translation everything works, in Intel VT-x/EPT or AMD-V/RVI I got message "This host does not support EPT. Using software virtualization with a software MMU." and everything works. BUT in Intel VT-x or AMD-V mode all 32-bit guests reset host just like 64-bit guests! So, this issue is not specific to 64-bit guests. One more thing. Using Intel VT-x or AMD-V mode for both 32/64-bit guests my host reset right after starting VM, i.e. before VM BIOS POST and before guest even start booting. But using Intel VT-x/EPT or AMD-V/RVI VM BIOS runs ok, then 64-bit guests start booting (Windows7 completed "Loading files" progressbar), and only after that host reset.

  Read the article

• Disk performance below expectations

  - by paulH

  this is a follow-up to a previous question that I asked (Two servers with inconsistent disk speed). I have a PowerEdge R510 server with a PERC H700 integrated RAID controller (call this Server B) that was built using eight disks with 3Gb/s bandwidth that I was comparing with an almost identical server (call this Server A) that was built using four disks with 6Gb/s bandwidth. Server A had much better I/O rates than Server B. Once I discovered the difference with the disks, I had Server A rebuilt with faster 6Gbps disks. Unfortunately this resulted in no increase in the performance of the disks. Expecting that there must be some other configuration difference between the servers, we took the 6Gbps disks out of Server A and put them in Server B. This also resulted in no increase in the performance of the disks. We now have two identical servers built, with the exception that one is built with six 6Gbps disks and the other with eight 3Gbps disks, and the I/O rates of the disks is pretty much identical. This suggests that there is some bottleneck other than the disks, but I cannot understand how Server B originally had better I/O that has subsequently been 'lost'. Comparative I/O information below, as measured by SQLIO. The same parameters were used for each test. It's not the actual numbers that are significant but rather the variations between systems. In each case D: is a 2 disk RAID 1 volume, and E: is a 4 disk RAID 10 volume (apart from the original Server A, where E: was a 2 disk RAID 0 volume). Server A (original setup with 6Gpbs disks) D: Read (MB/s) 63 MB/s D: Write (MB/s) 170 MB/s E: Read (MB/s) 68 MB/s E: Write (MB/s) 320 MB/s Server B (original setup with 3Gpbs disks) D: Read (MB/s) 52 MB/s D: Write (MB/s) 88 MB/s E: Read (MB/s) 112 MB/s E: Write (MB/s) 130 MB/s Server A (new setup with 3Gpbs disks) D: Read (MB/s) 55 MB/s D: Write (MB/s) 85 MB/s E: Read (MB/s) 67 MB/s E: Write (MB/s) 180 MB/s Server B (new setup with 6Gpbs disks) D: Read (MB/s) 61 MB/s D: Write (MB/s) 95 MB/s E: Read (MB/s) 69 MB/s E: Write (MB/s) 180 MB/s Can anybody suggest any ideas what is going on here? The drives in use are as follows: Dell Seagate F617N ST3300657SS 300GB 15K RPM SAS Dell Hitachi HUS156030VLS600 300GB 3.5 inch 15000rpm 6GB SAS Hitachi Hus153030vls300 300GB Server SAS Dell ST3146855SS Seagate 3.5 inch 146GB 15K SAS

  Read the article

• Benchmarking hosting providers IO with Bonnie

  - by Derek Organ

  Ok, because of a bunch of projects I'm working on I've access to dedicated Servers on a 3 hosting providers. As an experiment and for educational purposes I decided to see if I could benchmark how good the IO is with each. Bit of research lead me to Bonnie++ So I installed it on the server and ran this simple command /usr/sbin/bonnie -d /tmp/foo The 3 machines in different hosting providers are all dedicated machines, one is a VPS, other two are on some cloud platform e.g. VMWare / Xen using some kind of clustered SAN for storage This might be a naive thing to do but here are the results I found. HOST A Version 1.03c ------Sequential Output------ --Sequential Input- --Random- -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks-- Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP xxxxxxxxxxxxxxxx 1G 45081 88 56244 14 19167 4 20965 40 67110 6 67.2 0 ------Sequential Create------ --------Random Create-------- -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete-- files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP 16 15264 28 +++++ +++ +++++ +++ +++++ +++ +++++ +++ +++++ +++ xxxxxxxx,1G,45081,88,56244,14,19167,4,20965,40,67110,6,67.2,0,16,15264,28,+++++,+++,+++++,+++,+++++,+++,+++++,+++,+++++,+++ HOST B Version 1.03d ------Sequential Output------ --Sequential Input- --Random- -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks-- Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP xxxxxxxxxxxx 4G 43070 91 64510 15 19092 0 29276 47 39169 0 448.2 0 ------Sequential Create------ --------Random Create-------- -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete-- files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP 16 24799 52 +++++ +++ +++++ +++ 25443 54 +++++ +++ +++++ +++ xxxxxxx,4G,43070,91,64510,15,19092,0,29276,47,39169,0,448.2,0,16,24799,52,+++++,+++,+++++,+++,25443,54,+++++,+++,+++++,+++ HOST C Version 1.03c ------Sequential Output------ --Sequential Input- --Random- -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks-- Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP xxxxxxxxxxxxx 1536M 15598 22 85698 13 258969 20 16194 22 723655 21 +++++ +++ ------Sequential Create------ --------Random Create-------- -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete-- files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP 16 14142 22 +++++ +++ 18621 22 13544 22 +++++ +++ 17363 21 xxxxxxxx,1536M,15598,22,85698,13,258969,20,16194,22,723655,21,+++++,+++,16,14142,22,+++++,+++,18621,22,13544,22,+++++,+++,17363,21 Ok, so first off what is the best way to read the figures and are there any issues with really comparing these numbers? Is this in any way a true representation of IO Speed? If not is there any way for me to test that? Note: these 3 machines are using either Ubuntu or Debian (I presume that doesn't really matter)

  Read the article

• uploading via http post (multipart/form-data) silently fails with big files

  - by matteo

  When uploading multipart/form-data forms via a http post request to my apache web server, very big files (i.e. 30MB) are silently discarded. On the server side all looks as if the attached file was received with 0 bytes size. On the client side all looks like it had been uploaded succesfully (it takes the expected long time to upload and the browser gives no error message). On the server, nothing is logged into the error log. An entry is logged into the access log as if everything was ok (a post request and a 200 ok response). These uploads are being posted to a php script. In the php script, If I print_r $_FILES, I see the following information for the relevant file: [file5] => Array ( [name] => MOV023.3gp [type] => video/3gpp [tmp_name] => /tmp/phpgOdvYQ [error] => 0 [size] => 0 ) Note both [error] = 0 (which should mean no error) and [size] = 0 (as if the file was empty). My php script runs fine and receives all the rest of the data except these files. move_uploaded_file succeeds on these files and actually copies them as 0byte files. I've already changed the php directives max_upload_size to 50M and post_max_size to 200M, so neither the single file nor the request exceed any size limit. max_execution_time is not relevant, because the time to transfer the data does not count; and I've increased max_input_time to 1000 seconds, though this shouldn't be necessary since this is the time taken to parse the input data, not the time taken to upload it. Is there any apache configuration, prior to php, that could be causing these files to be discarded even prior to php execution? Some limit in size or in upload time? I've read about a default 300 seconds timeout limit, but this should apply to the time the connection is idle, not the time it takes while actually transferring data, right? Needless to say, uploads with all exactly identical conditions (including file format, client and everything) except smaller file size, work seamlessly, so the issue is clearly related to the file or request size, or to the time it takes to send it.

  Read the article

• "The system time has changed" avents after waking from sleep

  - by Damir Arh

  Sometimes when my computer running Windows 7 wakes up from sleep, it has to adjust the time. When this happens the following system event is logged: <Event xmlns='http://schemas.microsoft.com/win/2004/08/events/event'> <System> <Provider Name='Microsoft-Windows-Kernel-General' Guid='{A68CA8B7-004F-D7B6-A698-07E2DE0F1F5D}'/> <EventID>1</EventID> <Version>0</Version> <Level>4</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8000000000000010</Keywords> <TimeCreated SystemTime='2010-03-06T19:09:57.500000000Z'/> <EventRecordID>10672</EventRecordID> <Correlation/> <Execution ProcessID='4' ThreadID='56'/> <Channel>System</Channel> <Computer>GAME</Computer> <Security/> </System> <EventData> <Data Name='NewTime'>2010-03-06T19:09:57.500000000Z</Data> <Data Name='OldTime'>2010-03-06T17:34:32.870117200Z</Data> </EventData> <RenderingInfo Culture='sl-SI'> <Message>The system time has changed to ?2010?-?03?-?06T19:09:57.500000000Z from ?2010?-?03?-?06T17:34:32.870117200Z.</Message> <Level>Information</Level> <Task></Task> <Opcode>Info</Opcode> <Channel>System</Channel> <Provider>Microsoft-Windows-Kernel-General</Provider> <Keywords> <Keyword>Time</Keyword> </Keywords> </RenderingInfo> </Event> When this happens (I noticed it twice until now) the old time always corresponds to the time when computer entered sleep. The problem is that if Windows Media Center is scheduled for recording during this time, it just skips it as if the computer was turned off. I never had this problem running Windows Vista on the same machine. Any ideas what could be causing this problem and how to solve it are welcome.

  Read the article

• Data loss through permissions change?

  - by charliehorse55

  I seem to have deleted some files on my media drive, simply by changing the permissions. The Story I have many operating systems installed on my computer, and constantly switch between them. I bought a 1TB HD and formatted it as HFS+ (not journaled). It worked well between OSX and all of my linux installations while having much better metadata support than NTFS. I never synced the UIDs for my operating systems so the permissions were always doing funny things. Yesterday I tried to fix the permissions by first changing the UIDs of the other operating systems to match OSX, and then changing the file ownership of all files on the drive to match OSX. About 50% of the files on the drive were originally owned by OSX, the other half were owned by the various linux installations. I started to try and change the file permissions for the folders, and that's when it went south. The Commands These commands were run recursively on the one section of the drive. sudo chflags nouchg sudo chflags -N sudo chown myusername sudo chmod 666 sudo chgrp staff The Bad Sometime during the execution of these commands, all of the files belonging to OSX were deleted. If a folder had linux based files it would remain intact but any folder containing exclusively OSX files was erased. If a folder containing linux files also contained a subfolder with only OSX files, the sub folder would remain but is inaccesible and displays a file size of 0 bytes. Luckily these commands were only run on the videos folder, I also have a music folder with the same issue but I did not execute any of these commands on it. Effectively I have examples of the file permissions for all 3 states - the linux files before and after, and the OSX files before. OSX File Before -rw-r--r--@ 1 charliehorse 1000 3634241 15 Nov 2008 /path/to/file com.apple.FinderInfo 32 Linux File before: -rw-r--r--@ 1 charliehorse 1000 5321776 20 Sep 2002 /path/to/file/ com.apple.FinderInfo 32 Linux File After (Read only): (Different file, but I believe the same permissions originally) -rw-rw-rw-@ 1 charliehorse staff 366982610 17 Jun 2008 /path/to/file com.apple.FinderInfo 32 These files still exist so if there are any other commands to run on them to determine what has happened here, I can do that. EDIT Running ls on one of the "empty" deleted OSX folders yields this: ls: .: Permission denied ls: ..: Permission denied ls: subdirA: Permission denied ls: subdirB: Permission denied ls: subdirC: Permission denied ls: subdirD: Permission denied I believe my files might still be there, but the permissions are screwed.

  Read the article

• Ubuntu 12.04: apt-get "failed to fetch"; apt is trying to fetch via old static IP

  - by gabe

  Sample error: W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/precise-security/universe/i18n/Translation-en Unable to connect to 192.168.1.70:8118: Now this was working just fine until I changed the IP this morning. I have the server set to a static IP of 10.0.1.70 and for years it has been 192.168.1.70 - the IP apt-get is trying to use right now. I use privoxy and tor thus the 8118 port. Like I said it all worked until I changed the static IP from 192.168.1.70 to 10.0.1.70. I was forced to do so because of router issues. (Long and involved story, I didn't really want to change the IP because I know something like this would happen.) The setup for TOR/Privoxy requires that has you point Privoxy at TOR via 127.0.0.1:9050. Then point curl, etc to Privoxy via $HOME/.bashrc. Typically you would set the listen to IP for Privoxy to 127.0.0.1 but if you want it accessible to the rest of the LAN you set the IP to the server's LAN IP. Which I did a long time ago and was working fine until this morning. I have changed all instances of 192.168.1.70 to 10.0.1.70 in both /etc/privoxy/config and $HOME/.bashrc. What makes this really strange for me is that curl is working fine. I curl icanhazip.com and voila I get a new IP every 10 minutes or so. I curl CNN.com and I get the short but sweet permanently moved to www.cnn.com message I expect. Firefox works fine. Ping works fine. And I've tested all of this via Remote Desktop over my LAN. So the connection appears to be fine for everything except apt. I've also rebooted hoping that would clear 192.168.1.70 from apt. So the connection to the internet and DNS aren't an issue for these programs. And they are, as far as I can tell, using Privoxy/TOR just fine. The real irony here is that I've tried to open up Privoxy to go to Ubuntu's servers directly without going through TOR to speed up the downloads from Ubuntu (did this months ago). So somewhere that I have not been able to find, apt has stored the IP 192.168.1.70. And 192.168.1.70 is no longer valid. Thanks for the help

  Read the article

• long access times and errors in iis application

  - by user55862

  I am having an issue with an IIS application (details of environment at the end of the message). The web site works great most of the time and I cannot reproduce any error in our test system. On the live system however with on averare of 5-15 requests per second I have a problem with that some requests (about 0.05%) will take over 300 seconds to complete. The other requests complete withing 5-10 seconds. It seem like if all the errornous requests end up with a Timer_EntityBody error in the error log. I have never seen this as an end user but I guess that they will receive some kind of error message. I am trying to find out what can be causing this errornous behaviour. Any ideas are welcome. I have read something about that there can be an MTU issue if ICMP and MTU protocols are blocked in the firewall. Does that sound reasonable? I have also read about updating to IIS 7 should do the trick. Does it sound reasonable? I think that the problem has another cause but I have no idea of what. I have tried running hte perormance monitor, monitoring for database locks and active transaction counts. I can see some of these in the perfmon log for the MSSQL server (another machine) for example: Active transactions is sometimes peaking and sometimes for long periods Lock waits per seconds is sometimes peaking Transactions per second is sometimes peaking Page IO Latch wait is sometimes peaking Lock wait time (ms) is sometimes peaking But I cannot see that any of these correlate to the errors in the IIS error log. On the IIS server machine I can also see with perfmon that some values peak a few times during a day: Request execution time Avg disk queue length I can neither see that any of these correlate to the errors in the IIS error log. In the below code I have anonymized by replacing some parts with HIDDEN The following can be seen in the access log 2010-10-01 08:35:05 W3SVC1301873091 **HIDDEN** POST /**HIDDEN**/Modules/BalanceModule.aspx - 80 - **HIDDEN** Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.1;+.NET+CLR+2.0.50727;+.NET+CLR+3.0.4506.2152;+.NET+CLR+3.5.30729;+.NET4.0C;+.NET4.0E) ASP.NET_SessionId=**HIDDEN** 400 0 64 0 2241 127799 At the same time the following can be seen in the error log: 2010-10-01 08:35:05 **HIDDEN** 1999 **HIDDEN** 80 HTTP/1.0 POST /**HIDDEN**/Modules/BalanceModule.aspx - 1301873091 Timer_EntityBody Test+Pool I can tell the following about the environment: Server: Windows Server 2003 x64 SP2 running on VMWare HTTP Server: IIS v6.0 with ASP.NET 2.0.50727 Antivirus: Trend Micro OfficeScan (Is it a good idea to have this on a server?)

  Read the article

• Best Practise: DNS and VPN (with private network IPs)

  - by ribx

  I am trying to find the best solution for my DNS problem. We are running several services in our company that you can reach only over VPN. Other services, that are reachable through the internet got the domain ... At the moment all services inside the VPN network go by .local... These have an VPN IP of the private network 192.168.252.0/24. Clients reach from Linux over OSX to Windows. I can think of 4 possibilities to implement a DNS infrastructure: Most common: an internal DNS Server, that is pushed by the VPN. But this has several drawbacks: your DNS responses are limited to the speed of the VPN Connection and your own DNS server. Because of very complex websites, this can increase the time for a page to load quite a lot. Also: we have several VPNs that are not connected to each other and all of them have their own DNS server. Several DNS servers locally. These have to be configured by hand. And you have to use some third party tool like dnsmasq. If you start a DNS request, you ask your locally running DNS server, which decides which server to ask for which domain name. One college of mine uses such a solution with this OSX (I am sorry, I don't remember the name of the application). You use your domain hoster. Most of them have APIs available to manipulate your DNS entries. So you could pull your private network informations to your domain hoster. I am not sure whether they all accept private network IPs. But I guess there will be some problems in the same way as in number 4. The one we currently use, because it's for us the most logical choice: we forward the sub domain *.local.. to our own public DNS Server. This works quite good for some public DNS Servers like Google. But most ISPs do not forward the answers. Or don't do that always. Like my ISP sends me a positive result of the a DNS request of a *.local.. domain only every 10th time I make a nslookup. (Can someone explain this?) Here the real Question: Is there another solution we were not thinking about? Or: What of these methods do you use?

  Read the article

• How to shutdown VMware Fusion virtual machine on host shutdown

  - by Nikksno

  I have a Mac mini running Mavericks server. I installed the Atmail server + webmail vm [a linux centos distribution] in VMware Fusion Professional 6 with the VMware Tools addon. It works flawlessly. I've set it to start on boot and that works very reliably. However I've been looking for a way to also safely and gracefully shut it down whenever OS X shuts down for whatever reason. The Mac is connected to a UPS and configured to perform an automatic shutdown in case the battery starts running low so that's no additional problem. Now the first thing I did was to go into Fusion's prefs and select "Power off the vm" when closing it. However I noticed that for some arcane reason closing the vm window would actually forcibly power off the vm: so then I found this post that showed me how to change the default power options and I managed to have the vm cleanly shutdown when closing its window or quitting Fusion altogether. At this point I was hoping to have solved the problem but as it turns out upon invoking system shutdown OS X doesn't wait for the vm to shutdown and terminates Fusion before it has a chance to do so. At this point I started looking for a way to automate the process of shutting down the guest os via some advanced setting but had no luck in doing so. That's when I found a command to shut the vm down: vmrun and it worked. The only thing left was to find out a way to execute this script on os x shutdown and giving it a little time to power off completely. However this turned out to be a nightmare: I spent hours looking through several ways to do this with Startup Items, rc.shutdown, cron, launchd, etc... but none of them worked the way I had configured them. I have to say that I found very limited information on using launchd for a shutdown script execution and I know it's the latest thing in the OS X world so I'm hoping someone out there among you will be able to help me out with this. I still think this is an extremely basic feature to ask for and I was really surprised to find this little documentation on so many different aspects of this problem. Is Fusion too basic of an application for this? I really hope someone can help. Thank you very much in advance.

  Read the article

• Persistent Issues on small business network using Cisco 871W and Catalyst Express 500

  - by Ben Campbell

  Being the most qualified (read: still not qualified) to solve our persistant network issues, I've turned to serverfault for guidance. I've done some searching, reading related documentation on cisco.com and tried a bit of troubleshooting. Here is the config: 100mb synchronous connection from a business internet provider (tested multiple times at 100meg at the source) Cisco 871W wireless point & router is where the WAN connection starts (this serves all our wireless). The only wired connection in the 871W is the Catalyst switch listed below. Cisco Catalyst Express 500 (24TT) is where all the wired connections terminate. About 20 Windows workstations and servers (AD/Webservers only). Some services in EC2 including mail and other web servers/apps. I've been TOLD cabling internally should be gigabit-ready. Here are the problems: generally slow download rates from the internet to the desktop/laptop frequent "page cannot be displayed" errors in browsers-sometimes 3 or 4 reloads are necessary... often times CSS wont load or other content requiring the browser to connect to a different server. slow speed within the LAN from workstation to workstation copying files. I would expect extremely fast data transfer workstation to workstation / server to workstation in this simple network. Several things I need to admit: I'm not primarily a network guy. Funding is relatively low, I need to be the guy that finds the solution. I understand most of the terminology and most of the technology. Implementation is where I fail due to lack of experience. Getting to the point: I'm wondering whether experienced network admins think that our small network should be sufficiently served with our current hardware if configured properly... or if we should purchase new equipment and start fresh? If starting fresh is the plan, whatever that new equipment may be is a likely different question entirely. If I haven't provided enough information, I will happily do some troubleshooting and update with the results. I have experience using wireshark and some other tools. Please let me know what you think would be most helpful and thanks in advance. EDIT: I forgot to add that the Cisco applicance will not finish loading the SDM Express console. It hangs every time at the "populating modules... DHCP". It eventually crashes and closes. I've rebooted the hardware and this still happens.

  Read the article

• Nameserver not resolving or domain not pingable [closed]

  - by Ricky

  Sorry, if anyone can think of a better title please change it! I want to host my own websites from home. For testing purposes, I have a virtual machine running a trial version of Windows Server 2008 Enterprise. Note I currently run a VPS and host my own websites but due to a nice speed upgrade on our line I now want to host from home. I have several domains but I wanted to test with one, that is rickyoleary.com. Our ISP does not provide static IP addresses unless we have a business account so I've been looking at no-ip.com. I admit my networking isn't the best, hence this question but I've been bashing my head all day on this one. I created a host name, muffinbubble.no-ip.org which runs on IP: 86.148.124.15. I've setup IIS on the server with a simple test page. I've then forwarded port 80 traffic from the router and from what I can see, it's working. If I access my website (I was unable to link to this for some reason so please copy and paste this) - http://86.148.124.15/ - I see my test page. So the next step was to create my nameservers. This domain is with namecheap.com so I created my nameservers, ns1.rickyoleary.com and ns2.rickyoleary.com. Both these point to the same IP (and yes, that will be changed after testing), the same IP as above: 86.148.124.15. On the server itself I have set up DNS entries as below which I believe to be correct and added rickyoleary.com and www.rickyoleary.com in the host headers (or bindings) in IIS 7.0. If I try and look up my domain, rickyoleary.com it shows ns1.rickyoleary.com and ns2.rickyoleary.com as the nameservers. I then tried to use just-ping.com on my nameserver ns1.rickyoleary.com. I get 100% packets lost, but the correct IP address is returned (I'm guessing the router does not allow pings, but is still accessible...). I get no response when pinging rickyoleary.com. Here's the problems: I cannot ping ns1.rickyoleary.com or ns2.rickyoleary.com from a command prompt. I'm not sure if this is an issue. When I added the nameservers in Windows Server 2008 and clicked 'resolve' a message box displays stating "No such host is known". I cannot ping rickyoleary.com. rickyoleary.com is not showing my test page on my server. Now - please note, I've waited around 6 hours for propagation. From my experience, although you're told to wait 24 - 48 hours, the changes are normally pretty quick so perhaps I'm being impatient or naive to think it should all be working fine until then. I would really appreciate some help here. Thanks.

  Read the article

• xterm not wrapping text properly

  - by mulllhausen

  I'm configuring both my gnome-terminal and xterm columns (i still haven't picked which of these I will be using) and I have a couple of issues I would like to fix: the typing area seems to be smaller (fewer columns) than the display area the typed text is not wrapping to the next line when it reaches the end - it just continues back around on the same line, overwriting the prompt (i have set a custom bash prompt with PS1 in case this is relevant) $ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 7.1 (wheezy) Release: 7.1 Codename: wheezy $ echo $TERM xterm $ stty -a [peter@pc ~] $ stty -a speed 38400 baud; rows 52; columns 126; line = 0; intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = M-^?; eol2 = M-^?; swtch = M-^?; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0; -parenb -parodd cs8 hupcl -cstopb cread -clocal -crtscts -ignbrk brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff -iuclc ixany imaxbel iutf8 opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke $[peter@mine ~] $ # the column width only goes up to here ------------------------------------------------> the results are identical in both the xterm and in gnome-terminal 3.4.1.1 and as you can see, the output of the stty -a command goes right up to the edge of the screen, while the typing does not go that far. I have found that I can get the desired result by setting the columns to a very large number, eg: $ stty cols 1800 this fixes both problems. Is it the right way to go about solving this problem? Will this "break" any of the output from programs? So far I have tried top and stty -a and these seem OK. more info as requested in the comments i found that if i cat some input into a file then the columns actually strech the full width of the terminal window: [peter@mine applications] $ cat > /tmp/asd aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaasssssssssssssssssssssssssssssssssssssssssssssssssssssssssssqqqqqqqqqqqqqqqq qqqq does this imply that it is actually bash that is restricting the number of columns and not the terminal? if so then how to alter the number of columns in bash?

  Read the article

• Determining the health of a Cisco switch port?

  - by ewwhite

  I've been chasing a packet-loss and network stability issue for a handful of end-users on an internal network for the past few days... These issues surfaced recently, however, the location was struck by lightning six weeks ago. I was seeing 5-10% packet loss between a stack of four Cisco 2960's and several PC's and phones on the other side of a 77-meter run. The PC's were run inline with the phones over a trunked link. We were seeing dropped calls and interruptions in client-server applications and Microsoft Exchange connectivity. I tried the usual troubleshooting steps remotely, having a local technician do the following during breaks in user and production activity: change cables between the wall jack and device. change patch cables between the patch panel and switch port(s). try different switch ports within the 2960 stack. change end-user devices with known-good equipment (new phones, different PC's). clear switch port interface counters and monitor incrementing errors closely. (Pastebin output of sh int) Pored over the device logs and Observium RRD graphs. No link up/down issues from the switch side. change power strips on the end-user side. test cable runs from the Cisco 2960 using test cable-diagnostics tdr int Gi4/0/9 (clean)* test cable runs with a Tripp-Lite cable tester. (clean) run diagnostics on the switch stack members. (clean) In the end, it took three changes of switch ports to find a stable solution. The only logical conclusion is that a few Cisco 2960 switch ports are bad or flaky... Not dead, but not consistent in behavior either. I'm not used to seeing individual ports die in this manner. What else can I test or check to determine if these devices are bad? Is it common for single ports to have problems, rather than a contiguous bank of ports? BTW - show cable-diagnostics tdr int Gi4/0/14 is very cool... Interface Speed Local pair Pair length Remote pair Pair status --------- ----- ---------- ------------------ ----------- -------------------- Gi4/0/14 1000M Pair A 79 +/- 0 meters Pair B Normal Pair B 75 +/- 0 meters Pair A Normal Pair C 77 +/- 0 meters Pair D Normal Pair D 79 +/- 0 meters Pair C Normal

  Read the article

• How to correctly partition usb flash drive and which filesystem to choose considering wear leveling?

  - by random1

  Two problems. First one: how to partition the flash drive? I shouldn't need to do this, but I'm no longer sure if my partition is properly aligned since I was forced to delete and create a new partition table after gparted complained when I tried to format the drive from FAT to ext4. The naive answer would be to say "just use default and everything is going to be alright". However if you read the following links you'll know things are not that simple: https://lwn.net/Articles/428584/ and http://linux-howto-guide.blogspot.com/2009/10/increase-usb-flash-drive-write-speed.html Then there is also the issue of cylinders, heads and sectors. Currently I get this: $sfdisk -l -uM /dev/sdd Disk /dev/sdd: 30147 cylinders, 64 heads, 32 sectors/track Warning: The partition table looks like it was made for C/H/S=*/255/63 (instead of 30147/64/32). For this listing I'll assume that geometry. Units = mebibytes of 1048576 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End MiB #blocks Id System /dev/sdd1 1 30146 30146 30869504 83 Linux $fdisk -l /dev/sdd Disk /dev/sdd: 31.6 GB, 31611420672 bytes 255 heads, 63 sectors/track, 3843 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00010c28 So from my current understanding I should align partitions at 4 MiB (currently it's at 1 MiB). But I still don't know how to set the heads and sectors properly for my device. Second problem: file system. From the benchmarks I saw ext4 provides the best performance, however there is the issue of wear leveling. How can I know that my Transcend JetFlash 700's microcontroller provides for wear leveling? Or will I just be killing my drive faster? I've seen a lot of posts on the web saying don't worry the newer drives already take care of that. But I've never seen a single piece of backed evidence of that and at some point people start mixing SSD with USB flash drives technology. The safe option would be to go for ext2, however a serious of tests that I performed showed horrible performance!!! These values are from a real scenario and not some synthetic test: 42 files: 3,429,415,284 bytes copied to flash drive original fat32: 15.1 MiB/s ext4 after new partition table: 10.2 MiB/s ext2 after new partition table: 1.9 MiB/s Please read the links that I posted above before answering. I would also be interested in answers backed up with some references because a lot is said and re-said but then it lacks facts. Thank you for the help.

  Read the article

• Using an SSD with no AHCI [ICH7 base] - Windows 7 hangs frequently

  - by h4xnoodle

  I have a Shuttle Intel G31 + ICH7 (base -- not M/R etc) system. I just bought an OCZ Vertex 3 120gb [VTX3-25SAT3-120G] which includes the Sandforce 2218 firmware. The ICH7 does not support AHCI. I understand that this can be a problem. What I don't understand, is if it's necessary to have the proper performance of this drive. I know that without AHCI I may get a limited read/write speed -- this is fine. What my concern is, is the constant freezing/hangs I'm getting with Windows 7 on any disk activity. The 'Highest Active Time' flip-flops from 0 to 100% every minute or so regardless of large or small files. EDIT: The threads/processes with the highest response time is the kernel. I've been reading about other people with Shuttle SG31G2s, and they seem to be using SSDs no problem. Is this the controller's fault? The fact that I do not have AHCI enabled? It makes sense to me that if this SSD requires AHCI features that it would cause Windows to hang, but I would like to fully determine my situation before returning things/reformatting. To initially have my drive recognise the SSD at all, I had to change the BIOS option to Force Gen II instead of Auto for the SATA controller. I then installed Windows with no problem. There were no errors in the event log related to disk usage, but watching the perfmon I could see the highest active time and the processes (usually pagefile.sys being written to, or chrome/firefox caching) which was correlated to the hanging. So now what I need answered is: should I be returning this SSD and getting one with a different controller, or returning the SSD all-together as it will never work out and I will continue to get these hangs. Posts I've read: Windows 7 New SSD SATA AHCI? -- suggests to use AHCI http://forums.anandtech.com/showthread.php?t=2189868 -- Sandforce issues Windows 7 freezes with SSD -- and attached posts Why does my Windows 7 PC / SSD drive keep freezing? -- this is not the controller I have, but still a related issue. Windows 7 hangs after longer inactivity of user -- also tried messing with power settings with no luck. It was already set to 'Never' for turning off HDDs.

  Read the article

• Can't get Monit to work

  - by Andrea

  I am trying to configure Monit on my local machine to get a taste at how it works, but I have some issues. What I am trying to do is to get any evidence that Monit is up and running correctly and is actually monitoring something. So my /etc/monit/monitrc looks like set daemon 60 set logfile /var/log/monit.log set idfile /var/lib/monit/id set statefile /var/lib/monit/state set eventqueue basedir /var/lib/monit/events slots 100 set httpd port 2812 and allow username:password check process apache2 with pidfile /usr/local/apache/logs/apache2.pid start program = "/etc/init.d/apache2 start" stop program = "/etc/init.d/apache2 stop" if failed port 6543 protocol http then exec "/usr/bin/touch /tmp/monit" If I understand correctly, since apache does not listen on port 6543 (it is just a random number) I should get an error, and as a consequence the file /tmp/monit should be created. So I start monit by sudo service monit start sudo monit monitor apache2 Unfortunately no such file is created. Instead the web console shows an error for apache - execution failed. The log says 'apache2' failed to start. What am I doing wrong? EDIT As suggested in the comments, I ran monit in verbose mode, by monit -vv monitor apache2 (the exact command suggested in the comments failed). The output is Runtime constants: Control file = /etc/monit/monitrc Log file = /var/log/monit.log Pid file = /var/run/monit.pid Debug = True Log = True Use syslog = False Is Daemon = True Use process engine = True Poll time = 60 seconds with start delay 0 seconds Expect buffer = 256 bytes Event queue = base directory /var/lib/monit/events with 100 slots Mail from = (not defined) Mail subject = (not defined) Mail message = (not defined) Start monit httpd = True httpd bind address = Any/All httpd portnumber = 2812 httpd signature = True Use ssl encryption = False httpd auth. style = Basic Authentication The service list contains the following entries: Process Name = apache2 Pid file = /usr/local/apache/logs/apache2.pid Monitoring mode = active Start program = '/etc/init.d/apache2 start' timeout 30 second(s) Stop program = '/etc/init.d/apache2 stop' timeout 30 second(s) Existence = if does not exist 1 times within 1 cycle(s) then restart else if succeeded 1 times within 1 cycle(s) then alert Pid = if changed 1 times within 1 cycle(s) then alert Ppid = if changed 1 times within 1 cycle(s) then alert Port = if failed localhost:6543 [HTTP via TCP] with timeout 5 seconds 1 times within 1 cycle(s) then exec '/usr/bin/touch /tmp/prova-monit' timeout 0 cycle(s) else if succeeded 1 times within 1 cycle(s) then alert System Name = system_andrea-Vostro-420-Series Monitoring mode = active

  Read the article

• Torque jobs does not enter "E" state (unless "qrun")

  - by Vi.

  Jobs I add to the queue stays there in "Queued" state without attempts to be executed (unless I manually qrun them) /var/spool/torque/server_logs say just 04/11/2011 12:43:27;0100;PBS_Server;Job;16.localhost;enqueuing into batch, state 1 hop 1 04/11/2011 12:43:27;0008;PBS_Server;Job;16.localhost;Job Queued at request of test@localhost, owner = test@localhost, job name = Qqq, queue = batch The job requires just 1 CPU on 1 node. # qmgr -c "list queue batch" Queue batch queue_type = Execution total_jobs = 0 state_count = Transit:0 Queued:0 Held:0 Waiting:0 Running:0 Exiting:0 max_running = 3 acl_host_enable = True acl_hosts = localhost resources_min.ncpus = 1 resources_min.nodect = 1 resources_default.ncpus = 1 resources_default.nodes = 1 resources_default.walltime = 00:00:10 mtime = Mon Apr 11 12:07:10 2011 resources_assigned.ncpus = 0 resources_assigned.nodect = 0 kill_delay = 3 enabled = True started = True I can't set resources_assigned to nonzero because of Cannot set attribute, read only or insufficient permission resources_assigned.ncpus. When I qrun some task, this goes to mom's log: 04/11/2011 21:27:48;0001; pbs_mom;Svr;pbs_mom;LOG_DEBUG::mom_checkpoint_job_has_checkpoint, FALSE 04/11/2011 21:27:48;0001; pbs_mom;Job;TMomFinalizeJob3;job 18.localhost started, pid = 28592 04/11/2011 21:27:48;0080; pbs_mom;Job;18.localhost;scan_for_terminated: job 18.localhost task 1 terminated, sid=28592 04/11/2011 21:27:48;0008; pbs_mom;Job;18.localhost;job was terminated 04/11/2011 21:27:48;0080; pbs_mom;Svr;preobit_reply;top of preobit_reply 04/11/2011 21:27:48;0080; pbs_mom;Svr;preobit_reply;DIS_reply_read/decode_DIS_replySvr worked, top of while loop 04/11/2011 21:27:48;0080; pbs_mom;Svr;preobit_reply;in while loop, no error from job stat 04/11/2011 21:27:48;0080; pbs_mom;Job;18.localhost;obit sent to server Scheduler log (/var/spool/torque/sched_logs/20110705): 07/05/2011 21:44:53;0002; pbs_sched;Svr;Log;Log opened 07/05/2011 21:44:53;0002; pbs_sched;Svr;TokenAct;Account file /var/spool/torque/sched_priv/accounting/20110705 opened 07/05/2011 21:44:53;0002; pbs_sched;Svr;main;/usr/sbin/pbs_sched startup pid 16234 qstat -f: Job Id: 26.localhost Job_Name = qwe Job_Owner = test@localhost job_state = Q queue = batch server = localhost Checkpoint = u ctime = Tue Jul 5 21:43:31 2011 Error_Path = localhost:/home/test/jscfi/default/0.738784810485275/qwe.e26 Hold_Types = n Join_Path = n Keep_Files = n Mail_Points = a mtime = Tue Jul 5 21:43:31 2011 Output_Path = localhost:/home/test/jscfi/default/0.738784810485275/qwe.o26 Priority = 0 qtime = Tue Jul 5 21:43:31 2011 Rerunable = True Resource_List.ncpus = 1 Resource_List.neednodes = 1:ppn=1 Resource_List.nodect = 1 Resource_List.nodes = 1:ppn=1 Resource_List.walltime = 00:01:00 substate = 10 Variable_List = PBS_O_HOME=/home/test,PBS_O_LANG=en_US.UTF-8, PBS_O_LOGNAME=test, PBS_O_PATH=/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games, PBS_O_MAIL=/var/mail/test,PBS_O_SHELL=/bin/sh,PBS_SERVER=127.0.0.1, PBS_O_WORKDIR=/home/test/jscfi/default/0.738784810485275, PBS_O_QUEUE=batch,PBS_O_HOST=localhost euser = test egroup = test queue_rank = 1 queue_type = E etime = Tue Jul 5 21:43:31 2011 submit_args = run.pbs Walltime.Remaining = 6 fault_tolerant = False How to make it execute jobs automatically, without manual qrun?

  Read the article

• Adaptec 5805 after reboot don't starting

  - by Rakedko ShotGuns

  After rebooting the system, the controller is not included. It only works if the computer is shut down and turn off. Late i update firmware "Adaptec RAID 5805 Firmware Build 18948" How to fix the problem? add Log Configuration summary Server name.....................raid_test Adaptec Storage Manager agent...7.31.00 (18856) Adaptec Storage Manager console.7.31.00 (18856) Number of controllers...........1 Operating system................Windows Configuration information for controller 1 ------------------------------------------------------- Type............................Controller Model...........................Adaptec 5805 Controller number...............1 Physical slot...................2 Installed memory size...........512 MB Serial number...................8C4510C6C9E Boot ROM........................5.2-0 (18948) Firmware........................5.2-0 (18948) Device driver...................5.2-0 (16119) Controller status...............Optimal Battery status..................Charging Battery temperature.............Normal Battery charge amount (%).......37 Estimated charge remaining......0 days, 16 hours, 12 minutes Background consistency check....Disabled Copy back.......................Disabled Controller temperature..........Normal (40C / 104F) Default logical drive task priorityHigh Performance mode................Dynamic Number of logical devices.......1 Number of hot-spare drives......0 Number of ready drives..........0 Number of drive(s) assigned to MaxCache cache0 Maximum drives allowed for MaxCache cache8 MaxCache Read Cache Pool Size...0 GB NCQ status......................Enabled Stay awake status...............Disabled Internal drive spinup limit.....0 External drive spinup limit.....0 Phy 0...........................No device attached Phy 1...........................No device attached Phy 2...........................No device attached Phy 3...........................1.50 Gb/s Phy 4...........................No device attached Phy 5...........................No device attached Phy 6...........................No device attached Phy 7...........................No device attached Statistics version..............2.0 SSD Cache size..................0 Pages on fetch list.............0 Fetch list candidates...........0 Candidate replacements..........0 69319...........................31293 Logical device..................0 Logical device name............. RAID level......................Simple volume Data space......................148,916 GB Date created....................09/19/2012 Interface type..................Serial ATA State...........................Optimal Read-cache mode.................Enabled Preferred MaxCache read cache settingEnabled Actual MaxCache read cache setting Disabled Write-cache mode................Enabled (write-back) Write-cache setting.............Enabled (write-back) Partitioned.....................Yes Protected by hot spare..........No Bootable........................Yes Bad stripes.....................No Power Status....................Disabled Power State.....................Active Reduce RPM timer................Never Power off timer.................Never Verify timer....................Never Segment 0.......................Present: controller 1, connector 0, device 0, S/N 9RX3KZMT Overall host IOs................99075 Overall MB......................4411203 DRAM cache hits.................71929 SSD cache hits..................0 Uncached IOs....................29239 Overall disk failures...........0 DRAM cache full hits............71929 DRAM cache fetch / flush wait...0 DRAM cache hybrid reads.........3476 DRAM cache flushes..............-- Read hits.......................0 Write hits......................0 Valid Pages.....................0 Updates on writes...............0 Invalidations by large writes...0 Invalidations by R/W balance....0 Invalidations by replacement....0 Invalidations by other..........0 Page Fetches....................0 0...............................0 73..............................10822 8...............................3 46138...........................4916 27184...........................15226 20875...........................323 16982...........................1771 1563............................5317 1948............................2969 Serial attached SCSI ----------------------- Type............................Disk drive Vendor..........................Unknown Model...........................ST3160815AS Serial Number...................9RX3KZMT Firmware level..................3.AAD Reported channel................0 Reported SCSI device ID.........0 Interface type..................Serial ATA Size............................149,05 GB Negotiated transfer speed.......1.50 Gb/s State...........................Optimal S.M.A.R.T. error................No Write-cache mode................Write back Hardware errors.................0 Medium errors...................0 Parity errors...................0 Link failures...................0 Aborted commands................0 S.M.A.R.T. warnings.............0 Solid-state disk (non-spinning).false MaxCache cache capable..........false MaxCache cache assigned.........false NCQ status......................Enabled Phy 0...........................1.50 Gb/s Power State.....................Full rpm Supported power states..........Full rpm, Powered off 0x01............................113 0x03............................98 0x04............................99 0x05............................100 0x07............................83 0x09............................75 0x0A............................100 0x0C............................99 0xBB............................100 0xBD............................100 0xBE............................61 0xC2............................39 0xC3............................69 0xC5............................100 0xC6............................100 0xC7............................200 0xC8............................100 0xCA............................100 Aborted commands................0 Link failures...................0 Medium errors...................0 Parity errors...................0 Hardware errors.................0 SMART errors....................0 End of the configuration information for controller 1 List item

  Read the article

• external hard drive is no longer recognized, gives buffer I/O errors

  - by BioGeek

  Hi all, The external hard drive which contains all my photos and where I backed-up all my important documents is no longer recognized. It is a three month old 500GB Iomage Prestige Desktop Hard Drive. When I plug it in, it is recognised as a USB device, because it shows up when I type lsusb, but dmesg gives this error message. [19712.013250] usb 2-2: new high speed USB device using ehci_hcd and address 21 [19712.145347] usb 2-2: configuration #1 chosen from 1 choice [19712.147214] scsi25 : SCSI emulation for USB Mass Storage devices [19712.147514] usb-storage: device found at 21 [19712.147519] usb-storage: waiting for device to settle before scanning [19717.148978] usb-storage: device scan complete [19717.149527] scsi 25:0:0:0: Direct-Access ST350082 0AS PQ: 0 ANSI: 2 CCS [19717.151020] sd 25:0:0:0: Attached scsi generic sg2 type 0 [19717.151685] sd 25:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [19717.160402] sd 25:0:0:0: [sdb] Write Protect is off [19717.160412] sd 25:0:0:0: [sdb] Mode Sense: 34 00 00 00 [19717.160418] sd 25:0:0:0: [sdb] Assuming drive cache: write through [19717.165685] sd 25:0:0:0: [sdb] Assuming drive cache: write through [19717.165691] sdb: sdb1 [19719.171808] sd 25:0:0:0: [sdb] Assuming drive cache: write through [19719.171818] sd 25:0:0:0: [sdb] Attached SCSI disk [19737.430998] sd 25:0:0:0: [sdb] Unhandled sense code [19737.431007] sd 25:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [19737.431016] sd 25:0:0:0: [sdb] Sense Key : Medium Error [current] [19737.431027] sd 25:0:0:0: [sdb] Add. Sense: Unrecovered read error [19737.431038] end_request: I/O error, dev sdb, sector 6160463 [19737.431050] Buffer I/O error on device sdb1, logical block 6160400 [19737.431060] Buffer I/O error on device sdb1, logical block 6160401 [19737.431067] Buffer I/O error on device sdb1, logical block 6160402 [19737.431075] Buffer I/O error on device sdb1, logical block 6160403 [19737.431082] Buffer I/O error on device sdb1, logical block 6160404 [19737.431088] Buffer I/O error on device sdb1, logical block 6160405 [19737.431096] Buffer I/O error on device sdb1, logical block 6160406 [19737.431102] Buffer I/O error on device sdb1, logical block 6160407 [19737.431114] Buffer I/O error on device sdb1, logical block 6160408 [19737.431121] Buffer I/O error on device sdb1, logical block 6160409 [19737.712183] sd 6:0:0:0: [sdb] Unhandled sense code [19737.712191] sd 6:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE [19737.712200] sd 6:0:0:0: [sdb] Sense Key : Hardware Error [current] [19737.712210] sd 6:0:0:0: [sdb] Add. Sense: No additional sense information [19737.712222] end_request: I/O error, dev sdb, sector 0 [19737.712232] Buffer I/O error on device sdb, logical block 0 Neither does the external drive show when I use fdisk: jeroen@phalacrocorax:~$ sudo fdisk -l [sudo] password for jeroen: Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000341ad Device Boot Start End Blocks Id System /dev/sda1 * 1 18714 150320173+ 83 Linux /dev/sda2 18715 19457 5968147+ 5 Extended /dev/sda5 18715 19457 5968116 82 Linux swap / Solaris` I popped the disk out of the casing put it on a SATA connect internally and then tried the file recovery programs testdisk/photorec and SpinRite, but both failed because they couldn't recognize the external harddisk. Do I have any other options?

  Read the article

< Previous Page | 347 348 349 350 351 352 353 354 355 356 357 358  | Next Page >