bad passwords - Page 352

Expendable, Redundant, Easily recoverable

- by MeIr

I am desperate at this point, I have been looking for "Big storage" solution for a while on my own and I can't find anything that would suite my needs. But now push came to shove. Current situation: I have about 6TB data storage (already full) - Drobo. Yesterday Drobo died on me and it put me into bad situation - I can't recover my data without buying another Drobo. From extensive research online I realized that Drobo is not the safest bet and by now it seems very poor choice. I ordered new Drobo to try to get my data back, however I don't want to be in the same situation later and continuing using Drobo promises this event to re-occur. What I am looking for: 1) Inexpensive setup. 2) Dynamically extendable - add more drives and/or replace a drive with bigger capacity. 3) Redundant - setup against 1-3 drive failure, will depend on total number of drives. For the sake of argument let's assume for every 4 drives one should be able to fail without data loss. 4) Easy data recovery - let's say unforeseen happens, I would like to be able to recover information without buying new tools or replacements - example: new Drobo. 5) Should be USB or Network Attach Storage 6) No demand on speed. Doesn't have to be fast, I am not doing video editing on the setup. However if option exists, would be nice to have a decent speed. After thoughts: I reviewed few options and FreeNAS looks nice, but it doesn't have #2 - Dynamic extendability. There are work around with Pools but it seems a bit complicated and unnecessary. More over it seems like data safety is a big question - saw some horror stories. Please advise on what options I have and what seems like an optimal solution (if any). I don't care if it has to be Windows or Linux box or any other OS and/or software that has to run on top, but simple solution is more attractive. Thank you! P.S: Feel free to ignore "After thoughts".

Read the article

Recovering from backup without original install media

- by KGendron

A machine from my old job had a complete hard drive failure. I have backups but I'm running into severe problems restoring from them. The only install media was a secondary restore partition on the system's hard drive. I hate whoever came up with that idea more than i can possibly express with words. I spent several days trying to recover the disk - it is pretty well shot and none of my best tricks could even get it to show up in the bios/ The machine that broke is an hp with xp media center edition on it (I don't know why either). The backups were created using the default windows backup tool - I have .bfk file on an external hardrive that i am trying to restore from. I've replaced the hard drive. My home machine is running windows 7 64bit and i'm trying to use it as a platform to restore to the other disk. I downloaded the window 7 nt-restore utility, however no matter what i do it restores to my C drive rather than the specified drive. Fortunately win7 security settings prevented it from being a complete disaster - but still not a happy thing. I tried firing up the xp virtual machine. I can browse to the backups but it says they are invalid and refuse to let me view/ continue with the restore. I tried installing XP to an extra harddrive on my machine - however it bluescreens on me during the install process and I cry. I tried installing xp pro to the new drive and attempted to restore over it, it of course blackscreened on me as that was a stupid idea. I made two partitions on the new hard drive (Apparently the bios on this accursed piece of junk doesn't allow hd partitions larger than 200G anyways and thus fails 40 minutes into the install with an ever-descriptive "Disk Read Error". Guess how i spent last weekend? My last idea was to install xp pro to the second partition and then use it to restore from backup to the first. After the first restart it gives me the error "Windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk. Check boot path and disk hardware". My brain made one of those bad hard drive clicky noises. I've tried several boot disks but they don't seem to work. If anyone has a link to a good one it would be greatly appreciated. Anyone have any more ideas? - I really hate asking on what seems like such a simple issue but i am quite literally at my wit's end. Thanks - and sorry for the really long post.

Read the article

What is the probable failure - no BSOD, no event log, monitors sleeping, force reboot required

- by Tyler

Every 3 to 15 days, my PC freezes. This typically happens when the computer is idle, I'm coming home from work, back from vacation, etc. It's never happened while using my computer. The monitors are in power save mode The Caps Lock light on the (wireless) keyboard doesn't work Ctrl-alt-del has no effect, mouse (wireless) has no effect The hardware reset button and single press of power putton have no effect Computer does not appear on the network No BSOD, no memory dump Event logs have no errors or indications of problems near the time of crash. Only messages after reboot indicating that there was a reboot without a clean shutdown. Windows is set to never put the computer to sleep (just the display) Here are the vital stats of the build: OS Windows 8 Pro 64-bit CPU Intel i5-2400 Mobo Intel BOXDP67DE Micro ATX GPU MSI N460GTX Cyclone768D5/OC RAM CORSAIR XMS3 8GB (2 x 4GB) CMX8GX3M2A1333C9 PSU SeaSonic X Series X650 Gold System Drive Samsung 840 Pro 256 GB SSD Data Drive 2 x Western Digital WD20EARS 2TB in hardware RAID 1 Optical Lite-On DVD burner IHAS424-98 And here is the story of how the problem developed and what I've done to diagnose: January 2011, system built with Windows 7 64-bit, runs great. March 2011, Intel replaced the mobo because of the bad sata controllers. October 2012, upgrade to Windows 8 (problems start shortly after). January 2013, system freezes and causes network to fail for the whole house. Unplug the network cable and other devices and PCs can use the internet. Plug it back in, internet goes away for everyone. Reboot and everything is fine. March 2013, install Intel Gigabit CT PCI-E NIC, disable mobo nic in bios. Network strangeness goes away. Freezes are less frequent. Memtest shows no problems (20 passes). Early June 2013, replace Antec PSU with SeaSonic PSU. Mid June 2013, replace OCZ Vertex 2 SSD with Samsung SSD. Late June 2013, get frustrated and hope the community has some good ideas (I'm running out of budget to replace parts). My next plan of attack is setting "Turn off display" to Never and using a screen saver to see how that reacts on the next freeze. It makes me sad to waste power for up to 15 days though. Has anyone out there seen a problem like this? Any ideas on what kind of malfunction would act this way? Ideas of other diagnostic steps to take?

Read the article

SQLS Timeouts - High Reads in Profiler

- by lb01

I've audited a SQLS2008 server with Profiler for one day.. the overhead didn't seem to trouble this new client my company has. They are using a legacy VB6 application as a front-end. They're experiencing timeouts once SQLS RAM usage is high. The server is currently running x64 sqls2008 on a VM with nearly 9 GB of RAM. SQL Server's 'max server memory option' is currently set to 6GB. I've put the results of the trace in a table and queried them using this query. SELECT TextData, ApplicationName, Reads FROM [TraceWednesday] WHERE textdata is not null and EventClass = 12 GROUP BY TextData, ApplicationName, Reads ORDER BY Reads DESC As I expected, some values are very high. Top Reads, in pages. 2504188 1965910 1445636 1252433 1239108 1210153 1088580 1072725 Am I correct in thinking that the top one (2504188 pages) is 20033504 KB, which then is roughly ~20'000 MB, 20GB? These queries are often executed and can take quite some time to run. Eventually RAM is used up because of the cache fattening, and timeouts occur once SQL cannot 'splash' pages in the buffer pool as much. Costs go up. Am I correct in my understanding? I've read that I should tune the associated T-SQL and create appropriate indices. Obviously cutting down the I/O would make SQL Server use less RAM. OR, maybe it might just slow down the process of chewing up the whole RAM. If a lot less pages are read, maybe it'll all run much better even when usage is high? (less time swapping, etc.) Currently, our only option is to restart SQL once a week when RAM usage is high, suddenly the timeouts disappear. SQL breathes again. I'm sure lots of DBAs have been in this situation.. I'm asking before I start digging out all of the bad T-SQL and put indices here and there, is there is something else I can do? Any advice except from what I know (not much yet..) Much appreciated. Leo.

Read the article

My VPS ubuntu server is very slow

- by askmike

I just installed a frech copy of Ubuntu 12.04 on my vps because my old installation was very slow, unfortunately this did not fix the problem. With slow I mean requests for my PHP websites take a long time, very slow (30 sec per request) to slow (3+ sec per request). When it's really bad SSH is also laggish. The websites are: askmike.org (pretty standard Wordpress) mvr.me (own PHP) slow? very slow: Here is a picture of loading a clean install of wordpress slow: here is a picture of loading a small PHP based website the vps The VPS has 256mb ram and an 25GB hdd. Besides serving the 2 small websites it isn't doing anything AFAIK. What have I installed Clean Ubuntu server 12.04 LAMP stack few things like git and nodejs (not using both) ossec (because I thought my server was getting hammered) munin What I already tried / done I installed munin so that I could watch io speed and such. The problem is that I don't know where to look for in the munin report. I checked logs and don't see anything strange (although I don't really know where to look for besides strange / repetitive errors and GET requests). I configured Apache MPM to: <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 40 MaxRequestsPerChild 0 </IfModule> (apache is using prefork, the default) Stats I copied the munin report as it appeared at 4:50 last night to a site hosted on a shared webhost. Note that tonight my mysql crashed somewhere after 1:00 (which is a new problem altogether), so therefor the graph for last night might look strange. Can anyone help me get my VPS up to normal speed? EDIT: Thanks for the replies. The VPS is 10 bucks a month and is from directvps.nl (Dutch host and I'm also dutch). I did two speed tests for disk IO: $ dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync 1073741824 bytes (1.1 GB) copied, 23.1506 s, 46.4 MB/s $ dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync 1073741824 bytes (1.1 GB) copied, 39.3796 s, 27.3 MB/s Anyway: how can I prove to my VPS host that it is to slow? I can understand a server being busy slowing a website down. But 5-30 sec loadtime for a normal PHP webpage?

Read the article

How to configure apache's mod_proxy_html to work as an ajax proxy?

- by dcerecedo

I'm trying to build a web site that let's you view and manipulate data from any page in any other website. To do that, I have to bypass 'Allow Origin' problems: i'm loading the other domain's content in an iframe and i have to manipulate its content with javascript downloaded from my domain. My first attempt was to write a simple proxy myself, requesting the other domains page through a server proxy coded in Java that not only serves the content but rebuilds links (src's and href's) in the content so that the content referenced by these links alse get downloaded through my handmade proxy. The result is not bad but has problems with url's in css and scripts. It's then that i realized that mod_proxy_html is supposed to do exactly all this job. The problem is that i cannot figure out how to make it work as expected. Let's suppose my server runs in my-domain.com and to proxy and transform content from another domain i'd make a request like this: my-domain.com/proxy?url=http://another-domain.com/some/content I'd want mod_proxy_html to serve the content and rewrite following URLs in http://another-domain.com/some/content in the following ways: Absolute URLs not from another-domain.com: no rewritting Relative from root urls:/other/content - /proxy?url=http://another-domain.com/other/content Relative urls: other/content - /proxy?url=http://another-domain.com/some/content/other/content Relative to parent urls: ../other/content - /proxy?url=http://another-domain.com/some/other/content The url should be specified at runtime, not configuration time. Can this be achieved with mod_proxy_html? Could anyone provide a simple working configuration to start with? EDIT 1-First approach The following site config will work fine with sites that use absolute url's everywhere like http://www.huffingtonpost.es/. Youc could try on this config on localhost: http://localhost/asset/http://www.huffingtonpost.es/ <VirtualHost *:80> ServerName localhost LogLevel debug ProxyRequests off RewriteEngine On RewriteRule ^/asset/(.*) $1 [P] ProxyHTMLURLMap $1 /asset/ <Location /asset/> ProxyPassReverse / ProxyHTMLURLMap / /asset/ </Location> </VirtualHost> But as explained in the documentation, if I hit a site using relative url's, I'd like to have these rewritten on the html via mod_proxy_html. So I shoud change the Location block as follows: <Location /asset/> ProxyPassReverse / #Depending on your system use one line or the other #Ubuntu: #SetOutputFilter proxy-html #any other system: ProxyHTMLEnable On ProxyHTMLURLMap / /asset/ </Location> ...which doesn't seem to work. Comments, hints and ideas welcome!

Read the article

Display is slightly blurry on (native) 1920x1080 resolution

- by Martin Tuskevicius

I have a computer monitor that is approximately 23" in size. Its native resolution is 1920x1080, and Windows 7 will not allow it to be any higher. However, I cannot make the resolution a little lower as well. When I right-click on my desktop and select 'Screen resolution,' the vertical slider has only two options: 1920x1080 and 1280x720. There are no real problems that I am having besides the fact that the image is slightly blurry. I can easily make things out and see them, but I definitely feel that the image is not as clear as it could be. My graphics card is ATI Radeon HD 5450 and it has the latest graphics drivers installed. I've tried playing around with the AMD VISION Engine Control Center to see if I can change an option to make the image clearer, but I had no luck. I did find one odd thing, though. When I lowered the refresh rate from 60Hz to 50Hz, the image kind of "zoomed in" but it also became perfectly clear like I would expect it to look. The problem is that when I use 50Hz, the image zooms in a little on the center and I lose maybe an inch and a half of the screen (I do not see the bar at the top of applications, I do not see the Windows taskbar thing, etc). I figured if I could somehow zoom in so that the entire image fills the screen (not the slightly cropped version) then I would have the perfectly crisp image of 50Hz, and also the uncropped image of 60Hz. However, upon zooming in, the image began to look blurry again just like it did with 60Hz. So I am at a loss here. I do not know how to make the image look as clear as it should. I have the latest drivers (I updated them today) and I know that my monitor supports the resolution that I am trying to use. Has anybody experienced something like this before? I'd really appreciate any input - thanks! Update: I have figured out how to make the display look crisp! I set it to the 50Hz option, and then I changed the scaling through the monitor itself, rather than software. Now, however, I am finding that games look pretty bad because since it is clear, the lower quality really becomes apparent. I cannot run new games at 1080p, so I run them at the lowest resolution possible (1280x720, since it is the only other option offered, as I have mentioned). So I am wondering, is there a way to have Windows display more resolution options?

Read the article

How to use AD/GPO/Print Services to "push out" a new printer driver to replace a broken one? How did my server get a broken driver?

- by Zac B

Context: We have an AD/GPO-managed corporate network with a little over a hundred PCs running Windows 7 x64, and a few managed printers. Our Server2008R2 primary domain controller is configured as a print server for them all. Problem: After a recent windows update and restart (no printer driver updates were included) on the DC, a particular shared printer (Lexmark T650) has begin exhibiting some strange behavior. First, it prints a preceding and following blank page for almost every document, on jobs submitted by about half of client machines (no separator page is configured on the server or any of the clients I've seen). Second, whenever someone tries to access "Printing Preferences" on any client, they recieve the following error message (this happens everywhere, 100% of the time, and didn't happen before the update on the DC): Once they click "OK", the prefs screen appears (with no separator page selected) and everything seems fine. I'm not even sure if these two issues are related, but everyone seems affected by one or both of those issues. What I've Tried: I've been hesitant to un-deploy the problem printer, or remove it via GPO, as it's pretty heavily used. I've tried updating (via MS update and our internal WSUS server) client machines and the DC. No printer driver updates have appeared, and no number of updates or restarts on the server or the client seems to have achieved anything other than my boss getting grumpy that I'm bouncing the domain controller so often. I've tried deleting the drivers on the server, and re-installing them from the original source that has worked for the past year...no change. I've tried selecting "New Driver" for one of the shared printers on a client machine, running as domain admin, and pushed the latest driver found by MSupdate back up to the DC. This changed the version number of the driver recorded in the print server manager, but caused no change--on the client I pushed from, or on any other. The error still appears. Question: Why the heck is this happening? Obviously, I got a bad driver from somewhere, but how do I get rid of it? I don't know of any "roll back drivers" functionality for centrally managed print drivers like Windows offers for other devices. How would I a) get this issue resolved on a client, and b) push the fix to the other members of the domain?

Read the article

Repair corrupt hard disk on Mac without install CD

- by Sarah

The hard disk of my late 2009 MacBook Pro appears to have become corrupted. I am traveling and do not have my install CD (and won't for several weeks, nor will I be anywhere near an Apple store). The hard disk is not the original, which failed in June 2011. It's some Hitachi replacement installed by IT. History: I was typing an email this afternoon, my computer suddenly started making soft clicking sounds and then froze. I was not moving around. I rebooted, which took a while. I heard more clicking sounds and the computer froze at least once again. It's now kind of working, with mdworker sucking up one CPU. There are no awkward hard drive sounds when I run Chrome or play music. However, when I launched Stickies, I found no trace of my saved Stickies. I ran a live disk verification from within Disk Utility, and it reported Problem: As reported, I don't have access to an installation disc and am nowhere near an area where I can get one for at least two weeks. I have the option of asking someone to go to some trouble and expense to get one for me, but I'm not sure it's worth it: I've read that I can use fsck from single-user mode to repair the disk. Should I just try this? Is it risky? I'm concerned that the clicky sound portends imminent (mechanical) hard drive failure, so it's not worth doing a silly repair. This hard disk is backed up, but I definitely won't be able to access the backup while traveling. I'd like to maximize the probability that I can keep using my computer (and all its current files) while traveling. Update I bit the bullet and ran fsck -fy from single-user mode. It only needed one pass (modification) to reach the "okay" stage. However, rebooting took nearly 5 min and involved several rounds of scratchy sounds and a few bad clicks. I'm now back to kind of using my computer (the same files are missing as before). When I ran live disk verification from Disk Utility this time, however, it reported that the volume appears to be OK. Am I right to infer from the scratchy sounds, however, that my hard drive is still rapidly on its way out? Is there anything else I can do to increase its functionality over the next few weeks?

Read the article

BlueScreens on my ThinkPad with Windows 7 64 Bit and a SSD (CRITICAL_OBJECT_TERMINATION, ntoskernel.exe)

- by pvorb

I'm getting BlueScreens about every five days for more than three months. Here's an example: A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntoskrnl.exe CRITICAL_OBJECT_TERMINATION If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x000000f4 (0x0000000000000003, 0xfffffa80065f2b30, 0xfffffa80065f2e10, 0xfffff80002f9bf40) *** ntoskrnl.exe - Address 0xfffff80002c98d00 base at 0xfffff80002c19000 DateStamp 0x4d9fdd5b It's has always been the same BlueScreen message showing CRITICAL_OBJECT_TERMINATION, 0x000000f4, and ntoskrnl.exe. Of course the addresses change. My computer is a ThinkPad T400 (about 2 years old) with a SSD in it. I'm also running Windows 7 Professional 64 bit. When I bought my computer, it had a 250GByte SeaGate HDD in it, which I replaced by a 500GByte HDD by Western Digital. Last september I bought a Corsair F120 SSD and replaced the HDD by this SSD. Then I bought a LEICKE HDD adapter for the UltraBay II where I plugged in my 500GByte HDD. This configuration ran about half a year without any errors. After re-installing Windows this spring, I am getting regular BlueScreens. Sometimes my system runs for about 2 weeks without a BSOD, sometimes I get several BlueScreens a day. The only thing that I noticed is, that I'm always running Google Chrome when it happens. Is there anyone who has made his/her own bad experiences whith some of my components or is there anybody who can tell me if it would be helpful to send my notebook to Lenovo? Thank you very much for your help on my issue! Regards, Paul

Read the article

SQLS Timeouts - High Reads in Profiler

- by lb01

Hi I've audited a SQLS2008 server with Profiler for one day.. the overhead didn't seem to trouble this new client my company has. They are using a legacy VB6 application as a front-end. They're experiencing timeouts once SQLS RAM usage is high. The server is currently running x64 sqls2008 on a VM with nearly 9 GB of RAM. SQL Server's 'max server memory option' is currently set to 6GB. I've put the results of the trace in a table and queried them using this query. SELECT TextData, ApplicationName, Reads FROM [TraceWednesday] WHERE textdata is not null and EventClass = 12 GROUP BY TextData, ApplicationName, Reads ORDER BY Reads DESC As I expected, some values are very high. Top Reads, in pages. 2504188 1965910 1445636 1252433 1239108 1210153 1088580 1072725 Am I correct in thinking that the top one (2504188 pages) is 20033504 KB, which then is roughly ~20'000 MB, 20GB? These queries are often executed and can take quite some time to run. Eventually RAM is used up because of the cache fattening, and timeouts occur once SQL cannot 'splash' pages in the buffer pool as much. Costs go up. Am I correct in my understanding? I've read that I should tune the associated T-SQL and create appropriate indices. Obviously cutting down the I/O would make SQL Server use less RAM. OR, maybe it might just slow down the process of chewing up the whole RAM. If a lot less pages are read, maybe it'll all run much better even when usage is high? (less time swapping, etc.) Currently, our only option is to restart SQL once a week when RAM usage is high, suddenly the timeouts disappear. SQL breathes again. I'm sure lots of DBAs have been in this situation.. I'm asking before I start digging out all of the bad T-SQL and put indices here and there, is there is something else I can do? Any advice except from what I know (not much yet..) Much appreciated. Leo.

Read the article

OEM sound card with no drivers or support

- by randy

I thought my sound card was going out so I bought a sound card online. Everything seemed to work ok, I do have sound. But after a few months, I noticed the extra software that downloaded with the sound card drivers didn't work. I ended up contacting creative and after a month of e-mail support, they asked for the serial number and/or model number. Their reply back was I had purchased an OEM sound card and they could not provide support for that, and informed me that that is why their drivers and software didn't work. They informed me that I had to contact the company that distributed the sound card and install their software. Is there anything I can do to find out who distributed this sound card, or is there anything I can do to get other features to work? I have 4 speakers and a sub but only 2 speakers produce sound. The only control I have is the volume. Creative's driver update program will find my sound card, download updates and even added software, but if I try to click on a downloaded program like Creative's Toolbox or Media Center, I get an error that it cannot find the devise. That is why I contacted creative in the first place. EDIT Thanks for the responses everyone. Here's an update. I thought I'd go thru my old computer stuff for my classes at school. I have a lot of old stuff saved, boxes and cables and stuff. I found the box the sound card came in. It looks like a box you'd buy at the store, like Best Buy or CompUSA. I worked with creative for such a long time, it went past the point of being able to return it to the junk online store this shipped from. The box did have an install CD, so I thought I'd start over to reinstall the drivers and software that shipped with the card. I noticed that the install would uninstall a program, then reinstall it. so I thought things were working out. But no good. Everything still works but the programs were still bad. I'd get an error trying to load them - not found. I'll look on the card the next time I get a chance and see if I can spot any kind of name on it.

Read the article

Ubuntu + SSL ports + AVAST

- by jurajvt

I have an interesting problem with communication via standard SSL ports. Fresh installed Ubuntu 14.04 server + Postfix + Dovecot, SASL authentication provided by Dovecot, self-signed certificate generated trough the Dovecot script mkcert.sh. Redirected ports on ZyWALL USG 200. I can send and receive e-mails from outside with standard ports 25 and 110, but not over 587. I am connecting to my server from machine with Windows 8.1 + VMWare Player + Ubuntu 14.04 Desktop + ssh. On Windows host I have installed Avast! antivirus. When I am trying to telnet from virtual machine to server over 587, it refused connection. But when I turn on Avast! it let me in to message Connected to... Same with nmap. When Avast! is turned on it is show me all SSL ports. When I turned it off, only standard ports appeared. OpenSSL shows me CONNECTED(00000003). But outside virtual machine directly in Windows 8.1 using nmap with zenmap there are not opened SSL ports in both Avast! states. From other external linux machines are problems with touching SSL ports same - refused. I have turned on submission in master.cf and 587 port is correctly listening on 0.0.0.0 in process master.pid which belongs to Postfix. I can telnet, or nmap over port 587 to my domain directly from server. Other ports like 995, 993 are OK on localhost, too. It is true, that I can't send emails via 587 anyway (Avast! turned on/off), but I can see ports opened. It is possible, that I have simply bad certificate and Avast! has right one, so with turned it on I can see opened ports? EDIT: To be more clear, I can't see or using port 587 everywhere from outside (tried Thunderbird, telnet, openssl, nmap, putty, swaks; both from Linux or Windows machines) and that is my problem. It was only by chance that I saw opened ports when Avast! is turned on.

Read the article

Can't recover hard drive

- by BreezyChick89

My drive got corrupt after a thunderstorm. It used to be 1 partition of 2.5tb but now it shows 2 partitions. It's weird because 300gig free space is about how much it had before corrupting, but it was part of the first partition. I tried $ sudo resize2fs -f /dev/sdb1 Resizing the filesystem on /dev/sdb1 to 536870911 (4k) blocks. resize2fs: Can't read an block bitmap while trying to resize /dev/sdb1 Please run 'e2fsck -fy /dev/sdb1' to fix the filesystem after the aborted resize operation. sudo e2fsck -f /dev/sdb1 e2fsck 1.42 (29-Nov-2011) The filesystem size (according to the superblock) is 610471680 blocks The physical size of the device is 536870911 blocks Either the superblock or the partition table is likely to be corrupt! Abort? n .... Error reading block 537395215 (Invalid argument) while reading inode and block bitmaps. Ignore error<y>? yes Force rewrite<y>? yes Error writing block 537395215 (Invalid argument) while reading inode and block bitmaps. Ignore error<y>? yes ... A lot of these. I can't use e2fsck -y because the first question aborts if I say "y". If I put a weight on the 'y' key it fails because none of the errors were really fixed. I asked this question before and tried using gparted but gparted fails because the first thing it does is: e2fsck -f -y -v /dev/sdb1 giving the same error. The disk status says healthy. There are no bad blocks. This is very frustrating because I can see the data in testdisk and it looks like it's all there. I already bought another 2.5tb drive and made a clone using dd. The next step if I can't fix this is to wipe that drive and just move the data with testdisk, but it seems certain folders will copy infinitely until the drive is full because of symlinks or errors so it's also a difficult option. sudo fdisk -l Disk /dev/sdb: 2500.5 GB, 2500495958016 bytes 255 heads, 63 sectors/track, 304001 cylinders, total 4883781168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0005da5e Device Boot Start End Blocks Id System /dev/sdb1 * 2048 4294969342 2147483647+ 83 Linux sudo badblocks -b 4096 -n -o badfile /dev/sdb 610471680 536870911 badfile is empty I also tried changing the superblock with "fsck -b" but all of them are the same.

Read the article

SQL Express 2008 R2 on Amazon EC2 instance: tons of free memory, poor performance

- by gravyface

The old SQL Express 2005 was running on a low-end single Xeon CPU Dell server, RAID 5 7200 disks, 2 GB RAM (SBS 2003). I have not done any baseline measurements on the old physical server, but the Web app is used by half a dozen people (maybe 2 concurrently), so I figured "how bad can an Amazon EC2 instance be?". It's pretty horrible: a difference of 8 seconds of load time on one screen. First of all, I'm not a SQL guru, but here's what I've tried: Had a Small Instance, now running a c1.medium (High Cpu Medium) Windows 2008 32-bit R2 EBS-backed instance running IIS 7.5 and SQL Express 2008 R2. No noticeable improvement. Changed Page File from fixed 256 to Automatic. Setup a Striped Mirror from within Disk Management with two attached 1 GB EBS volumes. Moved database and transaction log, left everything else on the boot EBS volume. No noticeable change. Looked at memory, ~1000 MB of physical memory free (1.7 GB total). Changed SQL instance to use a minimum of 1024 RAM; restarted server, no change in memory usage. SQL still only using ~28MB of RAM(!). So I'm thinking: this database is tiny (28MB), why isn't the whole thing cached in RAM? Surely that would speed up performance. The transaction log is 241 MB. Seems kind of large in comparison -- has this not been committed? Is it a cause of performance degradation? I recall something about Recovery Models and log sizes somewhere in my travels, but not positive. Another thing: the old server was running SQL Express 2005. Not sure if that has any impact, but I tried changing the compatibility level from SQL 2000 to 2008, but that had no effect. Anyways, what else can I try here? Seems ridiculous to throw more virtual hardware at this thing. I know I/O is going to be rough on EBS volumes, but surely others are successfully running small .NET/SQL apps on reasonably priced instances?

Read the article

Need help troubleshooting highly variable ping times

- by Elliot.Bradshaw

I'm at work using Citrix (think Remote Desktop) to connect to client sites. With my job I have to write a fair bit of code while I'm connected remotely via Citrix, so the latency of my internet connection is important. If I'm getting ping times above 250ms, then it becomes almost impossible to scroll, click or type with accuracy. Recently my Comcast business internet has been exhibiting highly variable ping times. If I ping google.com, I'll get pings that range from 9ms all the way up to 1300ms. The problem seems to be at its worst during the hours of 1PM to 4:30PM. Outside of those hours and the variance in pings settles down, mostly between 9ms and 50ms. The signal to noise ratio and upstream power are both fine on my modem--the values are here: http://pastebin.com/D4hWGPXf I ran a trace route from my computer to google.com (the results of which are here: http://pastebin.com/GcdjYvMh) and did another test ping to the IP of the first hop outside of our local network (73.98.44.1)--the variance in ping times existed in exactly the same manner as if I were pinging Google. Connecting directly to the cable modem by CAT5 makes no difference. Here is a screenshot demonstrating the variance of the ping times: http://postimage.org/image/haocdeauv/full/ -- as you can see it can get pretty bad. Three Comcast techs have been out (two of them were here when the problem wasn't happening) and they as well as the regional tier 2 Comcast support were unable to diagnose the problem. I now have a ticket open with tier 3 support, but have yet to hear back from them. Does anyone know what could cause these sorts of problems or have any idea from the traceroute above where it could be originating? The regional tier 2 guy tried to tell me that what I'm seeing is normal--are highly variable ping times like that ever acceptable? Anything I should ask Comcast to do or look at to get this problem fixed? Any tips/advice much appreciated! Edit: This is Comcast cable internet at a small start-up, we've ruled out congestion in our private LAN as a cause (i.e., no one's watching YouTube when the pings become variable). Update: Tier 3 Comcast support advised swapping out the modem, a tech came here today and did that--same problem persists.

Read the article

Proper set up shared folders for users

- by user221486

First I would like to say thanks for helping, and I have huge problem with proper set up permission for shared folders. I have Windows 7 x64 ent. - name: backupfb - added to domain with shared folder on drive e: (e:\backup) 50 clients/laptops with TSM Tivoli fastback for workstations who save files on shared folder And I need to configure proper permission for my shared folders that only owner of folder can access to their folders. Folder structure is: e:\backup <- shared as a "backup" folder \\backupfb\backup\ e:\backup\BackupAdmin <-- directory is used by the Tivoli Storage Manager FastBack for Workstations client to download revisions and configurations. Nodes require read-only access to these directories e:\backup\RealTimeBackup <-- enable client accounts to create directories that are only accessible by the account that created them. As a result, the directory that contains data for a node is not created until that node connects to the server. So permission should look like that (take from instructions): Inheritable permissions from object`s parents are DISABLE Permission entries: \\backupfb\backup\BackupAdmin Allow Users Read, Execute This folder, subfolders, and files Traverse Folder / Execute Allow List Folder / Read Data Allow Read Attributes Allow Read Extended Attributes Allow Delete subfolders and files Allow Delete Allow Read Permission’s Allow Allow Administrators Full Control This folder, subfolders, and files Both folders have enabled option "apply these permissions to objects and/or containers within this container only" Here everything works fine \\backupfb\backup\RealTimeBackup <<-- Allow Administrators Full Control This folder, subfolders, and files Allow CREATOR OWNER Full Control This folder, subfolders, and files (from domain) Allow Users Special This folder only Traverse Folder / Execute Allow List Folder / Read Data Allow Read Attributes Allow Read Extended Attributes Allow Create Files / Write Data Allow Create Folders / Append Data Allow Delete subfolders and files Allow Read Permission’s Allow Allow OWNER RIGHTS* Full Control This folder, subfolders, and files Here I have huge problem with CREATOR OWNER Im able to set FULL CONTROL but I can only apply "Subfolders and files only". When I change props. to "This folder, subfolders and files" and save its change to "Subfolders and files only" So I try use icacls to set up permissions @echo off takeown /F E:\backup\ /R /A for /D %%i IN (E:\backup\RealTimeBackup*) DO icacls E:\backup\RealTimeBackup\%%~nxi /grant:r cloud\%%~nxi:F /T /C pause but after that user are able to create just one folder in \backupfb\backup\RealTimeBackup\userfolder but problem is with subfolders In log i have: FBW5022E Unable to access the specified file Explanation: The file specified is unable to be accessed. Possibly spelled incorrectly, or bad path, or permissions. User response: Ensure the user has the proper permissions for the file and directories involved andthat the file and directory exist Any idea ?? pls help ;-) thanks

Read the article

HP ProLiant DL380 G3 Running Windows Server 2000 has crashed between 6-7:30am for the past 5 days

- by user109717

I have a HP ProLiant DL380 G3 running Windows Server 2000 that has been crashing everyday between 6-730am. This started when I changed out a failing hard drive 6 days ago. I have looked at the scheduled tasks which does not have anything pertaining to this issue. Below are the only things I see in the system log and some of the dump files. Can this be a hardware issue if this happens at a certain time frame everyday? Any help is greatly appreciated. Thanks The previous system shutdown at 6:07:55 AM on 2/7/2012 was unexpected. System Information Agent: Health: The server is operational again. The server has previously been shutdown by the Automatic Server Recovery (ASR) feature and has just become operational again. [SNMP TRAP: 6025 in CPQHLTH.MIB] BugCheck 7A, {3, c0000005, 3400028, 0} Probably caused by : memory_corruption ( nt!MiMakeSystemAddressValidPfn+42 ) Followup: MachineOwner 0: kd !analyze -v * Bugcheck Analysis * * KERNEL_DATA_INPAGE_ERROR (7a) The requested page of kernel data could not be read in. Typically caused by a bad block in the paging file or disk controller error. Also see KERNEL_STACK_INPAGE_ERROR. If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185, it means the disk subsystem has experienced a failure. If the error status is 0xC000009A, then it means the request failed because a filesystem failed to make forward progress. Arguments: Arg1: 00000003, lock type that was held (value 1,2,3, or PTE address) Arg2: c0000005, error status (normally i/o status code) Arg3: 03400028, current process (virtual address for lock type 3, or PTE) Arg4: 00000000, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address) MODULE_NAME: nt IMAGE_NAME: memory_corruption BugCheck A, {0, 2, 1, 804137d6} Probably caused by : ntkrnlmp.exe ( nt!CcGetVirtualAddress+ba ) * Bugcheck Analysis * * IRQL_NOT_LESS_OR_EQUAL (a) An attempt was made to access a pageable (or completely invalid) address at an interrupt request level (IRQL) that is too high. This is usually caused by drivers using improper addresses. If a kernel debugger is available get the stack backtrace. Arguments: Arg1: 00000000, memory referenced Arg2: 00000002, IRQL Arg3: 00000001, bitfield : bit 0 : value 0 = read operation, 1 = write operation bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status) Arg4: 804137d6, address which referenced memory MODULE_NAME: nt IMAGE_NAME: ntkrnlmp.exe

Read the article

C# MVC: User Password Reset Controller: Issues with email addresses as usernames

- by 109221793

Hi guys, I have written the code below for resetting users passwords (am using the aspnet membership api) in an C# MVC application, and tested successfully on a sample tutorial application (MVC Music Store). Skip to the end if you wish to read problem description first. InactiveUsers View (Partial View) <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl<System.Web.Security.MembershipUserCollection>" %> <table class="normal" style="width: 100%; background-color: White;"> <tr> <th>User Name</th> <th>Last Activity date</th> <th>Locked Out</th> </tr> <%foreach (MembershipUser user in Model){ %> <tr> <td><%: Html.RouteLink(user.UserName, "AdminPassword", new { username = user.UserName }) %></td> <td><%: user.LastActivityDate %></td> <td><%: user.IsLockedOut %></td> </tr> <% }%> </table> InactiveUsers Controller public ActionResult InactiveUsers() { var users = Membership.GetAllUsers(); return View(users); } changeUserPassword GET and POST Controllers public ActionResult changeUserPassword(string username) { ViewData["username"] = username; return View(); } [HttpPost] public ActionResult changeUserPassword(ChangePasswordModel model, FormCollection values) { string username = values["username"]; string password = values["password"]; string confirmPassword = values["confirmPassword"]; MembershipUser mu = Membership.GetUser(username); if (password == confirmPassword) { if (mu.ChangePassword(mu.ResetPassword(), password)) { return RedirectToAction("Index", "ControlPanel"); } else { ModelState.AddModelError("", "The current password does not meet requirements"); } } return View(); } I also modified the Global.asax.cs file to cater for my route in the InactiveUsers partial: // Added in 10/01/11 RouteTable.Routes.MapRoute( "AdminPassword", // routename "ControlPanel/changeUserPassword/{username}", new { controller = "ControlPanel", action = "changeUserPassword", username = UrlParameter.Optional } ); // END Now, when I tested on the MVC Music Store, all of my usernames were just words, e.g. Administrator, User, etc. However now I am applying this code to a situation in my workplace and it's not working out quite as planned. The usernames used in my workplace are actually email addresses and I think this is what is causing the problem. When I click on the RouteLink in the partial InactiveUsers view, it should bring me to the reset password page with a url that looks like this: http://localhost:83/ControlPanel/changeUserPassword/[email protected], HOWEVER, what happens when I click on the RouteLink is an error is thrown to say that the view changeUserPassword cannot be found, and the URL looks like this: http://localhost:83/ControlPanel/changeUserPassword/example1%40gmail.com - See how the '@' symbol gets messed up? I've also debugged through the code, and in my GET changeUserPassword, the username is populating correctly: [email protected], so I'm thinking it's just the URL that's messing it up? If I type in the URL manually, the changeUserPassword view displays, however the password reset function does not work. An 'Object reference not set to an instance of an object' exception is thrown at the if (mu.ChangePassword(mu.ResetPassword(), password)) line. I think if I could solve the first issue (URL '@' symbol problem) it might help me along with my second issue. Any help would be appreciated :) Stack Trace - as requested Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [InvalidOperationException: The view 'changeUserPassword' or its master was not found. The following locations were searched: ~/Views/ControlPanel/changeUserPassword.aspx ~/Views/ControlPanel/changeUserPassword.ascx ~/Views/Shared/changeUserPassword.aspx ~/Views/Shared/changeUserPassword.ascx] System.Web.Mvc.ViewResult.FindView(ControllerContext context) +495 System.Web.Mvc.ViewResultBase.ExecuteResult(ControllerContext context) +208 System.Web.Mvc.ControllerActionInvoker.InvokeActionResult(ControllerContext controllerContext, ActionResult actionResult) +39 System.Web.Mvc.<>c__DisplayClass14.<InvokeActionResultWithFilters>b__11() +60 System.Web.Mvc.ControllerActionInvoker.InvokeActionResultFilter(IResultFilter filter, ResultExecutingContext preContext, Func`1 continuation) +391 System.Web.Mvc.<>c__DisplayClass16.<InvokeActionResultWithFilters>b__13() +61 System.Web.Mvc.ControllerActionInvoker.InvokeActionResultWithFilters(ControllerContext controllerContext, IList`1 filters, ActionResult actionResult) +285 System.Web.Mvc.ControllerActionInvoker.InvokeAction(ControllerContext controllerContext, String actionName) +830 System.Web.Mvc.Controller.ExecuteCore() +136 System.Web.Mvc.ControllerBase.Execute(RequestContext requestContext) +111 System.Web.Mvc.ControllerBase.System.Web.Mvc.IController.Execute(RequestContext requestContext) +39 System.Web.Mvc.<>c__DisplayClass8.<BeginProcessRequest>b__4() +65 System.Web.Mvc.Async.<>c__DisplayClass1.<MakeVoidDelegate>b__0() +44 System.Web.Mvc.Async.<>c__DisplayClass8`1.<BeginSynchronous>b__7(IAsyncResult _) +42 System.Web.Mvc.Async.WrappedAsyncResult`1.End() +141 System.Web.Mvc.Async.AsyncResultWrapper.End(IAsyncResult asyncResult, Object tag) +54 System.Web.Mvc.Async.AsyncResultWrapper.End(IAsyncResult asyncResult, Object tag) +40 System.Web.Mvc.MvcHandler.EndProcessRequest(IAsyncResult asyncResult) +52 System.Web.Mvc.MvcHandler.System.Web.IHttpAsyncHandler.EndProcessRequest(IAsyncResult result) +38 System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +8841105 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +184

Read the article

HttpWebRequest and Ignoring SSL Certificate Errors

- by Rick Strahl

Man I can't believe this. I'm still mucking around with OFX servers and it drives me absolutely crazy how some these servers are just so unbelievably misconfigured. I've recently hit three different 3 major brokerages which fail HTTP validation with bad or corrupt certificates at least according to the .NET WebRequest class. What's somewhat odd here though is that WinInet seems to find no issue with these servers - it's only .NET's Http client that's ultra finicky. So the question then becomes how do you tell HttpWebRequest to ignore certificate errors? In WinInet there used to be a host of flags to do this, but it's not quite so easy with WebRequest. Basically you need to configure the CertificatePolicy on the ServicePointManager by creating a custom policy. Not exactly trivial. Here's the code to hook it up: public bool CreateWebRequestObject(string Url) { try { this.WebRequest = (HttpWebRequest) System.Net.WebRequest.Create(Url); if (this.IgnoreCertificateErrors) ServicePointManager.CertificatePolicy = delegate { return true; };}One thing to watch out for is that this an application global setting. There's one global ServicePointManager and once you set this value any subsequent requests will inherit this policy as well, which may or may not be what you want. So it's probably a good idea to set the policy when the app starts and leave it be - otherwise you may run into odd behavior in some situations especially in multi-thread situations.Another way to deal with this is in you application .config file. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} <configuration> <system.net> <settings> <servicePointManager checkCertificateName="false" checkCertificateRevocationList="false" /> </settings> </system.net> </configuration> This seems to work most of the time, although I've seen some situations where it doesn't, but where the code implementation works which is frustrating. The .config settings aren't as inclusive as the programmatic code that can ignore any and all cert errors - shrug. Anyway, the code approach got me past the stopper issue. It still amazes me that theses OFX servers even require this. After all this is financial data we're talking about here. The last thing I want to do is disable extra checks on the certificates. Well I guess I shouldn't be surprised - these are the same companies that apparently don't believe in XML enough to generate valid XML (or even valid SGML for that matter)...© Rick Strahl, West Wind Technologies, 2005-2011Posted in .NET CSharp HTTP

Read the article

Tools and Utilities for the .NET Developer

- by mbcrump

Tweet this list! Add a link to my site to your bookmarks to quickly find this page again! Add me to twitter! This is a list of the tools/utilities that I use to do my job/hobby. I wanted this page to load fast and contain information that only you care about. If I have missed a tool that you like, feel free to contact me and I will add it to the list. Also, this list took a lot of time to complete. Please do not steal my work, if you like the page then please link back to my site. I will keep the links/information updated as new tools/utilities are created. Windows/.NET Development – This is a list of tools that any Windows/.NET developer should have in his bag. I have used at some point in my career everything listed on this page and below is the tools worth keeping. Name Description License AnkhSVN Subversion support for Visual Studio. It also works with VS2010. Free Aurora XAML Designer One of the best XAML creation tools available. Has a ton of built in templates that you can copy/paste into VS2010. COST/Trial BeyondCompare Beyond Compare 3 is the ideal tool for comparing files and folders on your Windows or Linux system. Visualize changes in your code and carefully reconcile them. COST/Trial BuildIT Automated Task Tool Its main purpose is to automate tasks, whether it is the final packaging of a product, an automated daily build, maybe sending out a mailing list, even backing-up files. Free C Sharper for VB Convert VB to C#. COST CLRProfiler Analyze and improve the behavior of your .NET app. Free CodeRush Direct competitor to ReSharper, contains similar feature. This is one of those decide for yourself. COST/Trial Disk2VHD Disk2vhd is a utility that creates VHD (Virtual Hard Disk - Microsoft's Virtual Machine disk format) versions of physical disks for use in Microsoft Virtual PC or Microsoft Hyper-V virtual machines (VMs). Free Eazfuscator.NET Is a free obfuscator for .NET. The main purpose is to protect intellectual property of software. Free EQATEC Profiler Make your .NET app run faster. No source code changes are needed. Just point the profiler to your app, run the modified code, and get a visual report. COST Expression Studio 3/4 Comes with Web, Blend, Sketch Flow and more. You can create websites, produce beautiful XAML and more. COST/Trial Expresso The award-winning Expresso editor is equally suitable as a teaching tool for the beginning user of regular expressions or as a full-featured development environment for the experienced programmer or web designer with an extensive knowledge of regular expressions. Free Fiddler Fiddler is a web debugging proxy which logs all HTTP(s) traffic between your computer and the internet. Free Firebug Powerful Web development tool. If you build websites, you will need this. Free FxCop FxCop is an application that analyzes managed code assemblies (code that targets the .NET Framework common language runtime) and reports information about the assemblies, such as possible design, localization, performance, and security improvements. Free GAC Browser and Remover Easy way to remove multiple assemblies from the GAC. Assemblies registered by programs like Install Shield can also be removed. Free GAC Util The Global Assembly Cache tool allows you to view and manipulate the contents of the global assembly cache and download cache. Free HelpScribble Help Scribble is a full-featured, easy-to-use help authoring tool for creating help files from start to finish. You can create Win Help (.hlp) files, HTML Help (.chm) files, a printed manual and online documentation (on a web site) all from the same Help Scribble project. COST/Trial IETester IETester is a free Web Browser that allows you to have the rendering and JavaScript engines of IE9 preview, IE8, IE7 IE 6 and IE5.5 on Windows 7, Vista and XP, as well as the installed IE in the same process. Free iTextSharp iText# (iTextSharp) is a port of the iText open source java library for PDF generation written entirely in C# for the .NET platform. Use the iText mailing list to get support. Free Kaxaml Kaxaml is a lightweight XAML editor that gives you a "split view" so you can see both your XAML and your rendered content. Free LINQPad LinqPad lets you interactively query databases in a LINQ. Free Linquer Many programmers are familiar with SQL and will need a help in the transition to LINQ. Sometimes there are complicated queries to be written and Linqer can help by converting SQL scripts to LINQ. COST/Trial LiquidXML Liquid XML Studio 2010 is an advanced XML developers toolkit and IDE, containing all the tools needed for designing and developing XML schema and applications. COST/Trial Log4Net log4net is a tool to help the programmer output log statements to a variety of output targets. log4net is a port of the excellent log4j framework to the .NET runtime. We have kept the framework similar in spirit to the original log4j while taking advantage of new features in the .NET runtime. For more information on log4net see the features document. Free Microsoft Web Platform Installer The Microsoft Web Platform Installer 2.0 (Web PI) is a free tool that makes getting the latest components of the Microsoft Web Platform, including Internet Information Services (IIS), SQL Server Express, .NET Framework and Visual Web Developer easy. Free Mono Development Don't have Visual Studio - no problem! This is an open Source C# and .NET development environment for Linux, Windows, and Mac OS X Free Net Mass Downloader While it’s great that Microsoft has released the .NET Reference Source Code, you can only get it one file at a time while you’re debugging. If you’d like to batch download it for reading or to populate the cache, you’d have to write a program that instantiated and called each method in the Framework Class Library. Fortunately, .NET Mass Downloader comes to the rescue! Free nMap Nmap ("Network Mapper") is a free and open source (license) utility for network exploration or security auditing. Many systems and network administrators also find it useful for tasks such as network inventory, managing service upgrade schedules, and monitoring host or service uptime. Free NoScript (Firefox add-in) The NoScript Firefox extension provides extra protection for Firefox, Flock, Seamonkey and other Mozilla-based browsers: this free, open source add-on allows JavaScript, Java and Flash and other plug-ins to be executed only by trusted web sites of your choice (e.g. your online bank), and provides the most powerful Anti-XSS protection available in a browser. Free NotePad 2 Notepad2, a fast and light-weight Notepad-like text editor with syntax highlighting. This program can be run out of the box without installation, and does not touch your system's registry. Free PageSpy PageSpy is a small add-on for Internet Explorer that allows you to select any element within a webpage, select an option in the context menu, and view detailed information about both the coding behind the page and the element you selected. Free Phrase Express PhraseExpress manages your frequently used text snippets in customizable categories for quick access. Free PowerGui PowerGui is a free community for PowerGUI, a graphical user interface and script editor for Microsoft Windows PowerShell! Free Powershell Comes with Win7, but you can automate tasks by using the .NET Framework. Great for network admins. Free Process Explorer Ever wondered which program has a particular file or directory open? Now you can find out. Process Explorer shows you information about which handles and DLLs processes have opened or loaded. Also, included in the SysInterals Suite. Free Process Monitor Process Monitor is an advanced monitoring tool for Windows that shows real-time file system, Registry and process/thread activity. Free Reflector Explore and analyze compiled .NET assemblies, viewing them in C#, Visual Basic, and IL. This is an Essential for any .NET developer. Free Regular Expression Library Stuck on a Regular Expression but you think someone has already figured it out? Chances are they have. Free Regulator Regulator makes Regular Expressions easy. This is a must have for a .NET Developer. Free RenameMaestro RenameMaestro is probably the easiest batch file renamer you'll find to instantly rename multiple files COST ReSharper The one program that I cannot live without. Supports VS2010 and offers simple refactoring, code analysis/assistance/cleanup/templates. One of the few applications that is worth the $$$. COST/Trial ScrewTurn Wiki ScrewTurn Wiki allows you to create, manage and share wikis. A wiki is a collaboratively-edited, information-centered website: the most famous is Wikipedia. Free SharpDevelop What is #develop? SharpDevelop is a free IDE for C# and VB.NET projects on Microsoft's .NET platform. Free Show Me The Template Show Me The Template is a tool for exploring the templates, be their data, control or items panel, that comes with the controls built into WPF for all 6 themes. Free SnippetCompiler Compiles code snippets without opening Visual Studio. It does not support .NET 4. Free SQL Prompt SQL Prompt is a plug-in that increases how fast you can work with SQL. It provides code-completion for SQL server, reformatting, db schema information and snippets. Awesome! COST/Trial SQLinForm SQLinForm is an automatic SQL code formatter for all major databases including ORACLE, SQL Server, DB2, UDB, Sybase, Informix, PostgreSQL, Teradata, MySQL, MS Access etc. with over 70 formatting options. COST/OnlineFree SSMS Tools SSMS Tools Pack is an add-in for Microsoft SQL Server Management Studio (SSMS) including SSMS Express. Free Storm STORM is a free and open source tool for testing web services. Free Telerik Code Convertor Convert code from VB to C Sharp and Vice Versa. Free TurtoiseSVN TortoiseSVN is a really easy to use Revision control / version control / source control software for Windows.Since it's not an integration for a specific IDE you can use it with whatever development tools you like. Free UltraEdit UltraEdit is the ideal text, HTML and hex editor, and an advanced PHP, Perl, Java and JavaScript editor for programmers. UltraEdit is also an XML editor including a tree-style XML parser. An industry-award winner, UltraEdit supports disk-based 64-bit file handling (standard) on 32-bit Windows platforms (Windows 2000 and later). COST/Trial Virtual Windows XP Comes with some W7 version and allows you to run WinXP along side W7. Free VirtualBox Virtualization by Sun Microsystems. You can virtualize Windows, Linux and more. Free Visual Log Parser SQL queries against a variety of log files and other system data sources. Free WinMerge WinMerge is an Open Source differencing and merging tool for Windows. WinMerge can compare both folders and files, presenting differences in a visual text format that is easy to understand and handle. Free Wireshark Wireshark is one of the best network protocol analyzer's for Unix and windows. This has been used several times to get me out of a bind. Free XML Notepad 07 Old, but still one of my favorite XML viewers. Free Productivity Tools – This is the list of tools that I use to save time or quickly navigate around Windows. Name Description License AutoHotKey Automate almost anything by sending keystrokes and mouse clicks. You can write a mouse or keyboard macro by hand or use the macro recorder. Free CLCL CLCL is clipboard caching utility. Free Ditto Ditto is an extension to the standard windows clipboard. It saves each item placed on the clipboard allowing you access to any of those items at a later time. Ditto allows you to save any type of information that can be put on the clipboard, text, images, html, custom formats, ..... Free Evernote Remember everything from notes to photos. It will synch between computers/devices. Free InfoRapid Inforapid is a search tool that will display all you search results in a html like browser. If you click on a word in that browser, it will start another search to the word you clicked on. Handy if you want to trackback something to it's true origin. The word you looked for will be highlighted in red. Clicking on the red word will open the containing file in a text based viewer. Clicking on any word in the opened document will start another search on that word. Free KatMouse The prime purpose of the KatMouse utility is to enhance the functionality of mice with a scroll wheel, offering 'universal' scrolling: moving the mouse wheel will scroll the window directly beneath the mouse cursor (not the one with the keyboard focus, which is default on Windows OSes). This is a major increase in the usefulness of the mouse wheel. Free ScreenR Instant Screencast with nothing to download. Works with Mac or PC and free. Free Start++ Start++ is an enhancement for the Start Menu in Windows Vista. It also extends the Run box and the command-line with customizable commands. For example, typing "w Windows Vista" will take you to the Windows Vista page on Wikipedia! Free Synergy Synergy lets you easily share a single mouse and keyboard between multiple computers with different operating systems, each with its own display, without special hardware. It's intended for users with multiple computers on their desk since each system uses its own monitor(s). Free Texter Texter lets you define text substitution hot strings that, when triggered, will replace hotstring with a larger piece of text. By entering your most commonly-typed snippets of text into Texter, you can save countless keystrokes in the course of the day. Free Total Commander File handling, FTP, Archive handling and much more. Even works with Win3.11. COST/Trial Available Wizmouse WizMouse is a mouse enhancement utility that makes your mouse wheel work on the window currently under the mouse pointer, instead of the currently focused window. This means you no longer have to click on a window before being able to scroll it with the mouse wheel. This is a far more comfortable and practical way to make use of the mouse wheel. Free Xmarks Bookmark sync and search between computers. Free General Utilities – This is a list for power user users or anyone that wants more out of Windows. I usually install a majority of these whenever I get a new system. Name Description License µTorrent µTorrent is a lightweight and efficient BitTorrent client for Windows or Mac with many features. I use this for downloading LEGAL media. Free Audacity Audacity® is free, open source software for recording and editing sounds. It is available for Mac OS X, Microsoft Windows, GNU/Linux, and other operating systems. Learn more about Audacity... Also check our Wiki and Forum for more information. Free AVast Free FREE Antivirus. Free CD Burner XP Pro CDBurnerXP is a free application to burn CDs and DVDs, including Blu-Ray and HD-DVDs. It also includes the feature to burn and create ISOs, as well as a multilanguage interface. Free CDEX You can extract digital audio CDs into mp3/wav. Free Combofix Combofix is a freeware (a legitimate spyware remover created by sUBs), Combofix was designed to scan a computer for known malware, spyware (SurfSideKick, QooLogic, and Look2Me as well as any other combination of the mentioned spyware applications) and remove them. Free Cpu-Z Provides information about some of the main devices of your system. Free Cropper Cropper is a screen capture utility written in C#. It makes it fast and easy to grab parts of your screen. Use it to easily crop out sections of vector graphic files such as Fireworks without having to flatten the files or open in a new editor. Use it to easily capture parts of a web site, including text and images. It's also great for writing documentation that needs images of your application or web site. Free DropBox Drag and Drop files to sync between computers. Free DVD-Fab Converts/Copies DVDs/Blu-Ray to different formats. (like mp4, mkv, avi) COST/Trial Available FastStone Capture FastStone Capture is a powerful, lightweight, yet full-featured screen capture tool that allows you to easily capture and annotate anything on the screen including windows, objects, menus, full screen, rectangular/freehand regions and even scrolling windows/web pages. Free ffdshow FFDShow is a DirectShow decoding filter for decompressing DivX, XviD, H.264, FLV1, WMV, MPEG-1 and MPEG-2, MPEG-4 movies. Free Filezilla FileZilla Client is a fast and reliable cross-platform FTP, FTPS and SFTP client with lots of useful features and an intuitive graphical user interface. You can also download a server version. Free FireFox Web Browser, do you really need an explanation? Free FireGestures A customizable mouse gestures extension which enables you to execute various commands and user scripts with five types of gestures. Free FoxIt Reader Light weight PDF viewer. You should install this with the advanced setting or it will install a toolbar and setup some shortcuts. Free gSynchIt Synch Gmail and Outlook. Even supports Outlook 2010 32/64 bit COST/Trial Available Hulu Desktop At home or in a hotel, this has replaced my cable/satellite subscription. Free ImgBurn ImgBurn is a lightweight CD / DVD / HD DVD / Blu-ray burning application that everyone should have in their toolkit! Free Infrarecorder InfraRecorder is a free CD/DVD burning solution for Microsoft Windows. It offers a wide range of powerful features; all through an easy to use application interface and Windows Explorer integration. Free KeePass KeePass is a free open source password manager, which helps you to manage your passwords in a secure way. Free LastPass Another password management, synchronize between browsers, automatic form filling and more. Free Live Essentials One download and lots of programs including Mail, Live Writer, Movie Maker and more! Free Monitores MonitorES is a small windows utility that helps you to turnoff monitor display when you lock down your machine.Also when you lock your machine, it will pause all your running media programs & set your IM status message to "Away" / Custom message(via options) and restore it back to normal when you back. Free mRemote mRemote is a full-featured, multi-tab remote connections manager. Free Open Office OpenOffice.org 3 is the leading open-source office software suite for word processing, spreadsheets, presentations, graphics, databases and more. It is available in many languages and works on all common computers. It stores all your data in an international open standard format and can also read and write files from other common office software packages. It can be downloaded and used completely free of charge for any purpose. Free Paint.NET Simple, intuitive, and innovative user interface for editing photos. Free Picasa Picasa is free photo editing software from Google that makes your pictures look great. Free Pidgin Pidgin is an easy to use and free chat client used by millions. Connect to AIM, MSN, Yahoo, and more chat networks all at once. Free PING PING is a live Linux ISO, based on the excellent Linux From Scratch (LFS) documentation. It can be burnt on a CD and booted, or integrated into a PXE / RIS environment. Free Putty PuTTY is an SSH and telnet client, developed originally by Simon Tatham for the Windows platform. Free Revo Uninstaller Revo Uninstaller Pro helps you to uninstall software and remove unwanted programs installed on your computer easily! Even if you have problems uninstalling and cannot uninstall them from "Windows Add or Remove Programs" control panel applet.Revo Uninstaller is a much faster and more powerful alternative to "Windows Add or Remove Programs" applet! It has very powerful features to uninstall and remove programs. Free Security Essentials Microsoft Security Essentials is a new, free consumer anti-malware solution for your computer. Free SetupVirtualCloneDrive Virtual CloneDrive works and behaves just like a physical CD/DVD drive, however it exists only virtually. Point to the .ISO file and it appears in Windows Explorer as a Drive. Free Shark 007 Codec Pack Play just about any file format with this download. Also includes my W7 Media Playlist Generator. Free Snagit 9 Screen Capture on steroids. Add arrows, captions, etc to any screenshot. COST/Trial Available SysinternalsSuite Go ahead and download the entire sys internals suite. I have mentioned multiple programs in this suite already. Free TeraCopy TeraCopy is a compact program designed to copy and move files at the maximum possible speed, providing the user with a lot of features. Free for Home TrueCrypt Free open-source disk encryption software for Windows 7/Vista/XP, Mac OS X, and Linux Free TweetDeck Fully featured Twitter client. Free UltraVNC UltraVNC is a powerful, easy to use and free software that can display the screen of another computer (via internet or network) on your own screen. The program allows you to use your mouse and keyboard to control the other PC remotely. It means that you can work on a remote computer, as if you were sitting in front of it, right from your current location. Free Unlocker Unlocks locked files. Pretty simple right? Free VLC Media Player VLC media player is a highly portable multimedia player and multimedia framework capable of reading most audio and video formats Free Windows 7 Media Playlist This program is special to my heart because I wrote it. It has been mentioned on podcast and various websites. It allows you to quickly create wvx video playlist for Windows Media Center. Free WinRAR WinRAR is a powerful archive manager. It can backup your data and reduce the size of email attachments, decompress RAR, ZIP and other files downloaded from Internet and create new archives in RAR and ZIP file format. COST/Trial Available Blogging – I use the following for my blog. Name Description License Insert Code for Windows Live Writer Insert Code for Windows Live Writer will format a snippet of text in a number of programming languages such as C#, HTML, MSH, JavaScript, Visual Basic and TSQL. Free LiveWriter Included in Live Essentials, but the ultimate in Windows Blogging Free PasteAsVSCode Plug-in for Windows Live Writer that pastes clipboard content as Visual Studio code. Preserves syntax highlighting, indentation and background color. Converts RTF, outputted by Visual Studio, into HTML. Free Desktop Management – The list below represent the best in Windows Desktop Management. Name Description License 7 Stacks Allows users to have "stacks" of icons in their taskbar. Free Executor Executor is a multi purpose launcher and a more advanced and customizable version of windows run. Free Fences Fences is a program that helps you organize your desktop and can hide your icons when they are not in use. Free RocketDock Rocket Dock is a smoothly animated, alpha blended application launcher. It provides a nice clean interface to drop shortcuts on for easy access and organization. With each item completely customizable there is no end to what you can add and launch from the dock. Free WindowsTab Tabbing is an essential feature of modern web browsers. Window Tabs brings the productivity of tabbed window management to all of your desktop applications. Free

Read the article

WCF WS-Security and WSE Nonce Authentication

- by Rick Strahl

WCF makes it fairly easy to access WS-* Web Services, except when you run into a service format that it doesn't support. Even then WCF provides a huge amount of flexibility to make the service clients work, however finding the proper interfaces to make that happen is not easy to discover and for the most part undocumented unless you're lucky enough to run into a blog, forum or StackOverflow post on the matter. This is definitely true for the Password Nonce as part of the WS-Security/WSE protocol, which is not natively supported in WCF. Specifically I had a need to create a WCF message on the client that includes a WS-Security header that looks like this from their spec document:<soapenv:Header> <wsse:Security soapenv:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <wsse:UsernameToken wsu:Id="UsernameToken-8" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"> <wsse:Username>TeStUsErNaMe1</wsse:Username> <wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText" >TeStPaSsWoRd1</wsse:Password> <wsse:Nonce EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" >f8nUe3YupTU5ISdCy3X9Gg==</wsse:Nonce> <wsu:Created>2011-05-04T19:01:40.981Z</wsu:Created> </wsse:UsernameToken> </wsse:Security> </soapenv:Header> Specifically, the Nonce and Created keys are what WCF doesn't create or have a built in formatting for. Why is there a nonce? My first thought here was WTF? The username and password are there in clear text, what does the Nonce accomplish? The Nonce and created keys are are part of WSE Security specification and are meant to allow the server to detect and prevent replay attacks. The hashed nonce should be unique per request which the server can store and check for before running another request thus ensuring that a request is not replayed with exactly the same values. Basic ServiceUtl Import - not much Luck The first thing I did when I imported this service with a service reference was to simply import it as a Service Reference. The Add Service Reference import automatically detects that WS-Security is required and appropariately adds the WS-Security to the basicHttpBinding in the config file:<?xml version="1.0" encoding="utf-8" ?> <configuration> <system.serviceModel> <bindings> <basicHttpBinding> <binding name="RealTimeOnlineSoapBinding"> <security mode="Transport" /> </binding> <binding name="RealTimeOnlineSoapBinding1" /> </basicHttpBinding> </bindings> <client> <endpoint address="https://notarealurl.com:443/services/RealTimeOnline" binding="basicHttpBinding" bindingConfiguration="RealTimeOnlineSoapBinding" contract="RealTimeOnline.RealTimeOnline" name="RealTimeOnline" /> </client> </system.serviceModel> </configuration> If if I run this as is using code like this:var client = new RealTimeOnlineClient(); client.ClientCredentials.UserName.UserName = "TheUsername"; client.ClientCredentials.UserName.Password = "ThePassword"; … I get nothing in terms of WS-Security headers. The request is sent, but the the binding expects transport level security to be applied, rather than message level security. To fix this so that a WS-Security message header is sent the security mode can be changed to: <security mode="TransportWithMessageCredential" /> Now if I re-run I at least get a WS-Security header which looks like this:<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" xmlns:u="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"> <s:Header> <o:Security s:mustUnderstand="1" xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <u:Timestamp u:Id="_0"> <u:Created>2012-11-24T02:55:18.011Z</u:Created> <u:Expires>2012-11-24T03:00:18.011Z</u:Expires> </u:Timestamp> <o:UsernameToken u:Id="uuid-18c215d4-1106-40a5-8dd1-c81fdddf19d3-1"> <o:Username>TheUserName</o:Username> <o:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText" >ThePassword</o:Password> </o:UsernameToken> </o:Security> </s:Header> Closer! Now the WS-Security header is there along with a timestamp field (which might not be accepted by some WS-Security expecting services), but there's no Nonce or created timestamp as required by my original service. Using a CustomBinding instead My next try was to go with a CustomBinding instead of basicHttpBinding as it allows a bit more control over the protocol and transport configurations for the binding. Specifically I can explicitly specify the message protocol(s) used. Using configuration file settings here's what the config file looks like:<?xml version="1.0"?> <configuration> <system.serviceModel> <bindings> <customBinding> <binding name="CustomSoapBinding"> <security includeTimestamp="false" authenticationMode="UserNameOverTransport" defaultAlgorithmSuite="Basic256" requireDerivedKeys="false" messageSecurityVersion="WSSecurity10WSTrustFebruary2005WSSecureConversationFebruary2005WSSecurityPolicy11BasicSecurityProfile10"> </security> <textMessageEncoding messageVersion="Soap11"></textMessageEncoding> <httpsTransport maxReceivedMessageSize="2000000000"/> </binding> </customBinding> </bindings> <client> <endpoint address="https://notrealurl.com:443/services/RealTimeOnline" binding="customBinding" bindingConfiguration="CustomSoapBinding" contract="RealTimeOnline.RealTimeOnline" name="RealTimeOnline" /> </client> </system.serviceModel> <startup> <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/> </startup> </configuration> This ends up creating a cleaner header that's missing the timestamp field which can cause some services problems. The WS-Security header output generated with the above looks like this:<s:Header> <o:Security s:mustUnderstand="1" xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <o:UsernameToken u:Id="uuid-291622ca-4c11-460f-9886-ac1c78813b24-1"> <o:Username>TheUsername</o:Username> <o:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText" >ThePassword</o:Password> </o:UsernameToken> </o:Security> </s:Header> This is closer as it includes only the username and password. The key here is the protocol for WS-Security:messageSecurityVersion="WSSecurity10WSTrustFebruary2005WSSecureConversationFebruary2005WSSecurityPolicy11BasicSecurityProfile10" which explicitly specifies the protocol version. There are several variants of this specification but none of them seem to support the nonce unfortunately. This protocol does allow for optional omission of the Nonce and created timestamp provided (which effectively makes those keys optional). With some services I tried that requested a Nonce just using this protocol actually worked where the default basicHttpBinding failed to connect, so this is a possible solution for access to some services. Unfortunately for my target service that was not an option. The nonce has to be there. Creating Custom ClientCredentials As it turns out WCF doesn't have support for the Digest Nonce as part of WS-Security, and so as far as I can tell there's no way to do it just with configuration settings. I did a bunch of research on this trying to find workarounds for this, and I did find a couple of entries on StackOverflow as well as on the MSDN forums. However, none of these are particularily clear and I ended up using bits and pieces of several of them to arrive at a working solution in the end. http://stackoverflow.com/questions/896901/wcf-adding-nonce-to-usernametoken http://social.msdn.microsoft.com/Forums/en-US/wcf/thread/4df3354f-0627-42d9-b5fb-6e880b60f8ee The latter forum message is the more useful of the two (the last message on the thread in particular) and it has most of the information required to make this work. But it took some experimentation for me to get this right so I'll recount the process here maybe a bit more comprehensively. In order for this to work a number of classes have to be overridden: ClientCredentials ClientCredentialsSecurityTokenManager WSSecurityTokenizer The idea is that we need to create a custom ClientCredential class to hold the custom properties so they can be set from the UI or via configuration settings. The TokenManager and Tokenizer are mainly required to allow the custom credentials class to flow through the WCF pipeline and eventually provide custom serialization. Here are the three classes required and their full implementations:public class CustomCredentials : ClientCredentials { public CustomCredentials() { } protected CustomCredentials(CustomCredentials cc) : base(cc) { } public override System.IdentityModel.Selectors.SecurityTokenManager CreateSecurityTokenManager() { return new CustomSecurityTokenManager(this); } protected override ClientCredentials CloneCore() { return new CustomCredentials(this); } } public class CustomSecurityTokenManager : ClientCredentialsSecurityTokenManager { public CustomSecurityTokenManager(CustomCredentials cred) : base(cred) { } public override System.IdentityModel.Selectors.SecurityTokenSerializer CreateSecurityTokenSerializer(System.IdentityModel.Selectors.SecurityTokenVersion version) { return new CustomTokenSerializer(System.ServiceModel.Security.SecurityVersion.WSSecurity11); } } public class CustomTokenSerializer : WSSecurityTokenSerializer { public CustomTokenSerializer(SecurityVersion sv) : base(sv) { } protected override void WriteTokenCore(System.Xml.XmlWriter writer, System.IdentityModel.Tokens.SecurityToken token) { UserNameSecurityToken userToken = token as UserNameSecurityToken; string tokennamespace = "o"; DateTime created = DateTime.Now; string createdStr = created.ToString("yyyy-MM-ddThh:mm:ss.fffZ"); // unique Nonce value - encode with SHA-1 for 'randomness' // in theory the nonce could just be the GUID by itself string phrase = Guid.NewGuid().ToString(); var nonce = GetSHA1String(phrase); // in this case password is plain text // for digest mode password needs to be encoded as: // PasswordAsDigest = Base64(SHA-1(Nonce + Created + Password)) // and profile needs to change to //string password = GetSHA1String(nonce + createdStr + userToken.Password); string password = userToken.Password; writer.WriteRaw(string.Format( "<{0}:UsernameToken u:Id=\"" + token.Id + "\" xmlns:u=\"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd\">" + "<{0}:Username>" + userToken.UserName + "</{0}:Username>" + "<{0}:Password Type=\"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText\">" + password + "</{0}:Password>" + "<{0}:Nonce EncodingType=\"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary\">" + nonce + "</{0}:Nonce>" + "<u:Created>" + createdStr + "</u:Created></{0}:UsernameToken>", tokennamespace)); } protected string GetSHA1String(string phrase) { SHA1CryptoServiceProvider sha1Hasher = new SHA1CryptoServiceProvider(); byte[] hashedDataBytes = sha1Hasher.ComputeHash(Encoding.UTF8.GetBytes(phrase)); return Convert.ToBase64String(hashedDataBytes); } } Realistically only the CustomTokenSerializer has any significant code in. The code there deals with actually serializing the custom credentials using low level XML semantics by writing output into an XML writer. I can't take credit for this code - most of the code comes from the MSDN forum post mentioned earlier - I made a few adjustments to simplify the nonce generation and also added some notes to allow for PasswordDigest generation. Per spec the nonce is nothing more than a unique value that's supposed to be 'random'. I'm thinking that this value can be any string that's unique and a GUID on its own probably would have sufficed. Comments on other posts that GUIDs can be potentially guessed are highly exaggerated to say the least IMHO. To satisfy even that aspect though I added the SHA1 encryption and binary decoding to give a more random value that would be impossible to 'guess'. The original example from the forum post used another level of encoding and decoding to string in between - but that really didn't accomplish anything but extra overhead. The header output generated from this looks like this:<s:Header> <o:Security s:mustUnderstand="1" xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <o:UsernameToken u:Id="uuid-f43d8b0d-0ebb-482e-998d-f544401a3c91-1" xmlns:u="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"> <o:Username>TheUsername</o:Username> <o:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">ThePassword</o:Password> <o:Nonce EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" >PjVE24TC6HtdAnsf3U9c5WMsECY=</o:Nonce> <u:Created>2012-11-23T07:10:04.670Z</u:Created> </o:UsernameToken> </o:Security> </s:Header> which is exactly as it should be. Password Digest? In my case the password is passed in plain text over an SSL connection, so there's no digest required so I was done with the code above. Since I don't have a service handy that requires a password digest, I had no way of testing the code for the digest implementation, but here is how this is likely to work. If you need to pass a digest encoded password things are a little bit trickier. The password type namespace needs to change to: http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#Digest and then the password value needs to be encoded. The format for password digest encoding is this: Base64(SHA-1(Nonce + Created + Password)) and it can be handled in the code above with this code (that's commented in the snippet above): string password = GetSHA1String(nonce + createdStr + userToken.Password); The entire WriteTokenCore method for digest code looks like this:protected override void WriteTokenCore(System.Xml.XmlWriter writer, System.IdentityModel.Tokens.SecurityToken token) { UserNameSecurityToken userToken = token as UserNameSecurityToken; string tokennamespace = "o"; DateTime created = DateTime.Now; string createdStr = created.ToString("yyyy-MM-ddThh:mm:ss.fffZ"); // unique Nonce value - encode with SHA-1 for 'randomness' // in theory the nonce could just be the GUID by itself string phrase = Guid.NewGuid().ToString(); var nonce = GetSHA1String(phrase); string password = GetSHA1String(nonce + createdStr + userToken.Password); writer.WriteRaw(string.Format( "<{0}:UsernameToken u:Id=\"" + token.Id + "\" xmlns:u=\"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd\">" + "<{0}:Username>" + userToken.UserName + "</{0}:Username>" + "<{0}:Password Type=\"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#Digest\">" + password + "</{0}:Password>" + "<{0}:Nonce EncodingType=\"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary\">" + nonce + "</{0}:Nonce>" + "<u:Created>" + createdStr + "</u:Created></{0}:UsernameToken>", tokennamespace)); } I had no service to connect to to try out Digest auth - if you end up needing it and get it to work please drop a comment… How to use the custom Credentials The easiest way to use the custom credentials is to create the client in code. Here's a factory method I use to create an instance of my service client: public static RealTimeOnlineClient CreateRealTimeOnlineProxy(string url, string username, string password) { if (string.IsNullOrEmpty(url)) url = "https://notrealurl.com:443/cows/services/RealTimeOnline"; CustomBinding binding = new CustomBinding(); var security = TransportSecurityBindingElement.CreateUserNameOverTransportBindingElement(); security.IncludeTimestamp = false; security.DefaultAlgorithmSuite = SecurityAlgorithmSuite.Basic256; security.MessageSecurityVersion = MessageSecurityVersion.WSSecurity10WSTrustFebruary2005WSSecureConversationFebruary2005WSSecurityPolicy11BasicSecurityProfile10; var encoding = new TextMessageEncodingBindingElement(); encoding.MessageVersion = MessageVersion.Soap11; var transport = new HttpsTransportBindingElement(); transport.MaxReceivedMessageSize = 20000000; // 20 megs binding.Elements.Add(security); binding.Elements.Add(encoding); binding.Elements.Add(transport); RealTimeOnlineClient client = new RealTimeOnlineClient(binding, new EndpointAddress(url)); // to use full client credential with Nonce uncomment this code: // it looks like this might not be required - the service seems to work without it client.ChannelFactory.Endpoint.Behaviors.Remove<System.ServiceModel.Description.ClientCredentials>(); client.ChannelFactory.Endpoint.Behaviors.Add(new CustomCredentials()); client.ClientCredentials.UserName.UserName = username; client.ClientCredentials.UserName.Password = password; return client; } This returns a service client that's ready to call other service methods. The key item in this code is the ChannelFactory endpoint behavior modification that that first removes the original ClientCredentials and then adds the new one. The ClientCredentials property on the client is read only and this is the way it has to be added. Summary It's a bummer that WCF doesn't suport WSE Security authentication with nonce values out of the box. From reading the comments in posts/articles while I was trying to find a solution, I found that this feature was omitted by design as this protocol is considered unsecure. While I agree that plain text passwords are rarely a good idea even if they go over secured SSL connection as WSE Security does, there are unfortunately quite a few services (mosly Java services I suspect) that use this protocol. I've run into this twice now and trying to find a solution online I can see that this is not an isolated problem - many others seem to have struggled with this. It seems there are about a dozen questions about this on StackOverflow all with varying incomplete answers. Hopefully this post provides a little more coherent content in one place. Again I marvel at WCF and its breadth of support for protocol features it has in a single tool. And even when it can't handle something there are ways to get it working via extensibility. But at the same time I marvel at how freaking difficult it is to arrive at these solutions. I mean there's no way I could have ever figured this out on my own. It takes somebody working on the WCF team or at least being very, very intricately involved in the innards of WCF to figure out the interconnection of the various objects to do this from scratch. Luckily this is an older problem that has been discussed extensively online and I was able to cobble together a solution from the online content. I'm glad it worked out that way, but it feels dirty and incomplete in that there's a whole learning path that was omitted to get here… Man am I glad I'm not dealing with SOAP services much anymore. REST service security - even when using some sort of federation is a piece of cake by comparison :-) I'm sure once standards bodies gets involved we'll be right back in security standard hell…© Rick Strahl, West Wind Technologies, 2005-2012Posted in WCF Web Services Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Announcing release of ASP.NET MVC 3, IIS Express, SQL CE 4, Web Farm Framework, Orchard, WebMatrix

- by ScottGu

I’m excited to announce the release today of several products: ASP.NET MVC 3 NuGet IIS Express 7.5 SQL Server Compact Edition 4 Web Deploy and Web Farm Framework 2.0 Orchard 1.0 WebMatrix 1.0 The above products are all free. They build upon the .NET 4 and VS 2010 release, and add a ton of additional value to ASP.NET (both Web Forms and MVC) and the Microsoft Web Server stack. ASP.NET MVC 3 Today we are shipping the final release of ASP.NET MVC 3. You can download and install ASP.NET MVC 3 here. The ASP.NET MVC 3 source code (released under an OSI-compliant open source license) can also optionally be downloaded here. ASP.NET MVC 3 is a significant update that brings with it a bunch of great features. Some of the improvements include: Razor ASP.NET MVC 3 ships with a new view-engine option called “Razor” (in addition to continuing to support/enhance the existing .aspx view engine). Razor minimizes the number of characters and keystrokes required when writing a view template, and enables a fast, fluid coding workflow. Unlike most template syntaxes, with Razor you do not need to interrupt your coding to explicitly denote the start and end of server blocks within your HTML. The Razor parser is smart enough to infer this from your code. This enables a compact and expressive syntax which is clean, fast and fun to type. You can learn more about Razor from some of the blog posts I’ve done about it over the last 6 months Introducing Razor New @model keyword in Razor Layouts with Razor Server-Side Comments with Razor Razor’s @: and <text> syntax Implicit and Explicit code nuggets with Razor Layouts and Sections with Razor Today’s release supports full code intellisense support for Razor (both VB and C#) with Visual Studio 2010 and the free Visual Web Developer 2010 Express. JavaScript Improvements ASP.NET MVC 3 enables richer JavaScript scenarios and takes advantage of emerging HTML5 capabilities. The AJAX and Validation helpers in ASP.NET MVC 3 now use an Unobtrusive JavaScript based approach. Unobtrusive JavaScript avoids injecting inline JavaScript into HTML, and enables cleaner separation of behavior using the new HTML 5 “data-“ attribute convention (which conveniently works on older browsers as well – including IE6). This keeps your HTML tight and clean, and makes it easier to optionally swap out or customize JS libraries. ASP.NET MVC 3 now includes built-in support for posting JSON-based parameters from client-side JavaScript to action methods on the server. This makes it easier to exchange data across the client and server, and build rich JavaScript front-ends. We think this capability will be particularly useful going forward with scenarios involving client templates and data binding (including the jQuery plugins the ASP.NET team recently contributed to the jQuery project). Previous releases of ASP.NET MVC included the core jQuery library. ASP.NET MVC 3 also now ships the jQuery Validate plugin (which our validation helpers use for client-side validation scenarios). We are also now shipping and including jQuery UI by default as well (which provides a rich set of client-side JavaScript UI widgets for you to use within projects). Improved Validation ASP.NET MVC 3 includes a bunch of validation enhancements that make it even easier to work with data. Client-side validation is now enabled by default with ASP.NET MVC 3 (using an onbtrusive javascript implementation). Today’s release also includes built-in support for Remote Validation - which enables you to annotate a model class with a validation attribute that causes ASP.NET MVC to perform a remote validation call to a server method when validating input on the client. The validation features introduced within .NET 4’s System.ComponentModel.DataAnnotations namespace are now supported by ASP.NET MVC 3. This includes support for the new IValidatableObject interface – which enables you to perform model-level validation, and allows you to provide validation error messages specific to the state of the overall model, or between two properties within the model. ASP.NET MVC 3 also supports the improvements made to the ValidationAttribute class in .NET 4. ValidationAttribute now supports a new IsValid overload that provides more information about the current validation context, such as what object is being validated. This enables richer scenarios where you can validate the current value based on another property of the model. We’ve shipped a built-in [Compare] validation attribute with ASP.NET MVC 3 that uses this support and makes it easy out of the box to compare and validate two property values. You can use any data access API or technology with ASP.NET MVC. This past year, though, we’ve worked closely with the .NET data team to ensure that the new EF Code First library works really well for ASP.NET MVC applications. These two posts of mine cover the latest EF Code First preview and demonstrates how to use it with ASP.NET MVC 3 to enable easy editing of data (with end to end client+server validation support). The final release of EF Code First will ship in the next few weeks. Today we are also publishing the first preview of a new MvcScaffolding project. It enables you to easily scaffold ASP.NET MVC 3 Controllers and Views, and works great with EF Code-First (and is pluggable to support other data providers). You can learn more about it – and install it via NuGet today - from Steve Sanderson’s MvcScaffolding blog post. Output Caching Previous releases of ASP.NET MVC supported output caching content at a URL or action-method level. With ASP.NET MVC V3 we are also enabling support for partial page output caching – which allows you to easily output cache regions or fragments of a response as opposed to the entire thing. This ends up being super useful in a lot of scenarios, and enables you to dramatically reduce the work your application does on the server. The new partial page output caching support in ASP.NET MVC 3 enables you to easily re-use cached sub-regions/fragments of a page across multiple URLs on a site. It supports the ability to cache the content either on the web-server, or optionally cache it within a distributed cache server like Windows Server AppFabric or memcached. I’ll post some tutorials on my blog that show how to take advantage of ASP.NET MVC 3’s new output caching support for partial page scenarios in the future. Better Dependency Injection ASP.NET MVC 3 provides better support for applying Dependency Injection (DI) and integrating with Dependency Injection/IOC containers. With ASP.NET MVC 3 you no longer need to author custom ControllerFactory classes in order to enable DI with Controllers. You can instead just register a Dependency Injection framework with ASP.NET MVC 3 and it will resolve dependencies not only for Controllers, but also for Views, Action Filters, Model Binders, Value Providers, Validation Providers, and Model Metadata Providers that you use within your application. This makes it much easier to cleanly integrate dependency injection within your projects. Other Goodies ASP.NET MVC 3 includes dozens of other nice improvements that help to both reduce the amount of code you write, and make the code you do write cleaner. Here are just a few examples: Improved New Project dialog that makes it easy to start new ASP.NET MVC 3 projects from templates. Improved Add->View Scaffolding support that enables the generation of even cleaner view templates. New ViewBag property that uses .NET 4’s dynamic support to make it easy to pass late-bound data from Controllers to Views. Global Filters support that allows specifying cross-cutting filter attributes (like [HandleError]) across all Controllers within an app. New [AllowHtml] attribute that allows for more granular request validation when binding form posted data to models. Sessionless controller support that allows fine grained control over whether SessionState is enabled on a Controller. New ActionResult types like HttpNotFoundResult and RedirectPermanent for common HTTP scenarios. New Html.Raw() helper to indicate that output should not be HTML encoded. New Crypto helpers for salting and hashing passwords. And much, much more… Learn More about ASP.NET MVC 3 We will be posting lots of tutorials and samples on the http://asp.net/mvc site in the weeks ahead. Below are two good ASP.NET MVC 3 tutorials available on the site today: Build your First ASP.NET MVC 3 Application: VB and C# Building the ASP.NET MVC 3 Music Store We’ll post additional ASP.NET MVC 3 tutorials and videos on the http://asp.net/mvc site in the future. Visit it regularly to find new tutorials as they are published. How to Upgrade Existing Projects ASP.NET MVC 3 is compatible with ASP.NET MVC 2 – which means it should be easy to update existing MVC projects to ASP.NET MVC 3. The new features in ASP.NET MVC 3 build on top of the foundational work we’ve already done with the MVC 1 and MVC 2 releases – which means that the skills, knowledge, libraries, and books you’ve acquired are all directly applicable with the MVC 3 release. MVC 3 adds new features and capabilities – it doesn’t obsolete existing ones. You can upgrade existing ASP.NET MVC 2 projects by following the manual upgrade steps in the release notes. Alternatively, you can use this automated ASP.NET MVC 3 upgrade tool to easily update your existing projects. Localized Builds Today’s ASP.NET MVC 3 release is available in English. We will be releasing localized versions of ASP.NET MVC 3 (in 9 languages) in a few days. I’ll blog pointers to the localized downloads once they are available. NuGet Today we are also shipping NuGet – a free, open source, package manager that makes it easy for you to find, install, and use open source libraries in your projects. It works with all .NET project types (including ASP.NET Web Forms, ASP.NET MVC, WPF, WinForms, Silverlight, and Class Libraries). You can download and install it here. NuGet enables developers who maintain open source projects (for example, .NET projects like Moq, NHibernate, Ninject, StructureMap, NUnit, Windsor, Raven, Elmah, etc) to package up their libraries and register them with an online gallery/catalog that is searchable. The client-side NuGet tools – which include full Visual Studio integration – make it trivial for any .NET developer who wants to use one of these libraries to easily find and install it within the project they are working on. NuGet handles dependency management between libraries (for example: library1 depends on library2). It also makes it easy to update (and optionally remove) libraries from your projects later. It supports updating web.config files (if a package needs configuration settings). It also allows packages to add PowerShell scripts to a project (for example: scaffold commands). Importantly, NuGet is transparent and clean – and does not install anything at the system level. Instead it is focused on making it easy to manage libraries you use with your projects. Our goal with NuGet is to make it as simple as possible to integrate open source libraries within .NET projects. NuGet Gallery This week we also launched a beta version of the http://nuget.org web-site – which allows anyone to easily search and browse an online gallery of open source packages available via NuGet. The site also now allows developers to optionally submit new packages that they wish to share with others. You can learn more about how to create and share a package here. There are hundreds of open-source .NET projects already within the NuGet Gallery today. We hope to have thousands there in the future. IIS Express 7.5 Today we are also shipping IIS Express 7.5. IIS Express is a free version of IIS 7.5 that is optimized for developer scenarios. It works for both ASP.NET Web Forms and ASP.NET MVC project types. We think IIS Express combines the ease of use of the ASP.NET Web Server (aka Cassini) currently built-into Visual Studio today with the full power of IIS. Specifically: It’s lightweight and easy to install (less than 5Mb download and a quick install) It does not require an administrator account to run/debug applications from Visual Studio It enables a full web-server feature set – including SSL, URL Rewrite, and other IIS 7.x modules It supports and enables the same extensibility model and web.config file settings that IIS 7.x support It can be installed side-by-side with the full IIS web server as well as the ASP.NET Development Server (they do not conflict at all) It works on Windows XP and higher operating systems – giving you a full IIS 7.x developer feature-set on all Windows OS platforms IIS Express (like the ASP.NET Development Server) can be quickly launched to run a site from a directory on disk. It does not require any registration/configuration steps. This makes it really easy to launch and run for development scenarios. You can also optionally redistribute IIS Express with your own applications if you want a lightweight web-server. The standard IIS Express EULA now includes redistributable rights. Visual Studio 2010 SP1 adds support for IIS Express. Read my VS 2010 SP1 and IIS Express blog post to learn more about what it enables. SQL Server Compact Edition 4 Today we are also shipping SQL Server Compact Edition 4 (aka SQL CE 4). SQL CE is a free, embedded, database engine that enables easy database storage. No Database Installation Required SQL CE does not require you to run a setup or install a database server in order to use it. You can simply copy the SQL CE binaries into the \bin directory of your ASP.NET application, and then your web application can use it as a database engine. No setup or extra security permissions are required for it to run. You do not need to have an administrator account on the machine. Just copy your web application onto any server and it will work. This is true even of medium-trust applications running in a web hosting environment. SQL CE runs in-memory within your ASP.NET application and will start-up when you first access a SQL CE database, and will automatically shutdown when your application is unloaded. SQL CE databases are stored as files that live within the \App_Data folder of your ASP.NET Applications. Works with Existing Data APIs SQL CE 4 works with existing .NET-based data APIs, and supports a SQL Server compatible query syntax. This means you can use existing data APIs like ADO.NET, as well as use higher-level ORMs like Entity Framework and NHibernate with SQL CE. This enables you to use the same data programming skills and data APIs you know today. Supports Development, Testing and Production Scenarios SQL CE can be used for development scenarios, testing scenarios, and light production usage scenarios. With the SQL CE 4 release we’ve done the engineering work to ensure that SQL CE won’t crash or deadlock when used in a multi-threaded server scenario (like ASP.NET). This is a big change from previous releases of SQL CE – which were designed for client-only scenarios and which explicitly blocked running in web-server environments. Starting with SQL CE 4 you can use it in a web-server as well. There are no license restrictions with SQL CE. It is also totally free. Tooling Support with VS 2010 SP1 Visual Studio 2010 SP1 adds support for SQL CE 4 and ASP.NET Projects. Read my VS 2010 SP1 and SQL CE 4 blog post to learn more about what it enables. Web Deploy and Web Farm Framework 2.0 Today we are also releasing Microsoft Web Deploy V2 and Microsoft Web Farm Framework V2. These services provide a flexible and powerful way to deploy ASP.NET applications onto either a single server, or across a web farm of machines. You can learn more about these capabilities from my previous blog posts on them: Introducing the Microsoft Web Farm Framework Automating Deployment with Microsoft Web Deploy Visit the http://iis.net website to learn more and install them. Both are free. Orchard 1.0 Today we are also releasing Orchard v1.0. Orchard is a free, open source, community based project. It provides Content Management System (CMS) and Blogging System support out of the box, and makes it possible to easily create and manage web-sites without having to write code (site owners can customize a site through the browser-based editing tools built-into Orchard). Read these tutorials to learn more about how you can setup and manage your own Orchard site. Orchard itself is built as an ASP.NET MVC 3 application using Razor view templates (and by default uses SQL CE 4 for data storage). Developers wishing to extend an Orchard site with custom functionality can open and edit it as a Visual Studio project – and add new ASP.NET MVC Controllers/Views to it. WebMatrix 1.0 WebMatrix is a new, free, web development tool from Microsoft that provides a suite of technologies that make it easier to enable website development. It enables a developer to start a new site by browsing and downloading an app template from an online gallery of web applications (which includes popular apps like Umbraco, DotNetNuke, Orchard, WordPress, Drupal and Joomla). Alternatively it also enables developers to create and code web sites from scratch. WebMatrix is task focused and helps guide developers as they work on sites. WebMatrix includes IIS Express, SQL CE 4, and ASP.NET - providing an integrated web-server, database and programming framework combination. It also includes built-in web publishing support which makes it easy to find and deploy sites to web hosting providers. You can learn more about WebMatrix from my Introducing WebMatrix blog post this summer. Visit http://microsoft.com/web to download and install it today. Summary I’m really excited about today’s releases – they provide a bunch of additional value that makes web development with ASP.NET, Visual Studio and the Microsoft Web Server a lot better. A lot of folks worked hard to share this with you today. On behalf of my whole team – we hope you enjoy them! Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

Read the article

Complete Guide to Networking Windows 7 with XP and Vista

- by Mysticgeek

Since there are three versions of Windows out in the field these days, chances are you need to share data between them. Today we show how to get each version to be share files and printers with one another. In a perfect world, getting your computers with different Microsoft operating systems to network would be as easy as clicking a button. With the Windows 7 Homegroup feature, it’s almost that easy. However, getting all three of them to communicate with each other can be a bit of a challenge. Today we’ve put together a guide that will help you share files and printers in whatever scenario of the three versions you might encounter on your home network. Sharing Between Windows 7 and XP The most common scenario you’re probably going to run into is sharing between Windows 7 and XP. Essentially you’ll want to make sure both machines are part of the same workgroup, set up the correct sharing settings, and making sure network discovery is enabled on Windows 7. The biggest problem you may run into is finding the correct printer drivers for both versions of Windows. Share Files and Printers Between Windows 7 & XP Map a Network Drive Another method of sharing data between XP and Windows 7 is mapping a network drive. If you don’t need to share a printer and only want to share a drive, then you can just map an XP drive to Windows 7. Although it might sound complicated, the process is not bad. The trickiest part is making sure you add the appropriate local user. This will allow you to share the contents of an XP drive to your Windows 7 computer. Map a Network Drive from XP to Windows 7 Sharing between Vista and Windows 7 Another scenario you might run into is having to share files and printers between a Vista and Windows 7 machine. The process is a bit easier than sharing between XP and Windows 7, but takes a bit of work. The Homegroup feature isn’t compatible with Vista, so we need to go through a few different steps. Depending on what your printer is, sharing it should be easier as Vista and Windows 7 do a much better job of automatically locating the drivers. How to Share Files and Printers Between Windows 7 and Vista Sharing between Vista and XP When Windows Vista came out, hardware requirements were intensive, drivers weren’t ready, and sharing between them was complicated due to the new Vista structure. The sharing process is pretty straight-forward if you’re not using password protection…as you just need to drop what you want to share into the Vista Public folder. On the other hand, sharing with password protection becomes a bit more difficult. Basically you need to add a user and set up sharing on the XP machine. But once again, we have a complete tutorial for that situation. Share Files and Folders Between Vista and XP Machines Sharing Between Windows 7 with Homegroup If you have one or more Windows 7 machine, sharing files and devices becomes extremely easy with the Homegroup feature. It’s as simple as creating a Homegroup on on machine then joining the other to it. It allows you to stream media, control what data is shared, and can also be password protected. If you don’t want to make your Windows 7 machines part of the same Homegroup, you can still share files through the Public Folder, and setup a printer to be shared as well. Use the Homegroup Feature in Windows 7 to Share Printers and Files Create a Homegroup & Join a New Computer To It Change which Files are Shared in a Homegroup Windows Home Server If you want an ultimate setup that creates a centralized location to share files between all systems on your home network, regardless of the operating system, then set up a Windows Home Server. It allows you to centralize your important documents and digital media files on one box and provides easy access to data and the ability to stream media to other machines on your network. Not only that, but it provides easy backup of all your machines to the server, in case disaster strikes. How to Install and Setup Windows Home Server How to Manage Shared Folders on Windows Home Server Conclusion The biggest annoyance is dealing with printers that have a different set of drivers for each OS. There is no real easy way to solve this problem. Our best advice is to try to connect it to one machine, and if the drivers won’t work, hook it up to the other computer and see if that works. Each printer manufacturer is different, and Windows doesn’t always automatically install the correct drivers for the device. We hope this guide helps you share your data between whichever Microsoft OS scenario you might run into! Here are some other articles that will help you accomplish your home networking needs: Share a Printer on a Home Network from Vista or XP to Windows 7 How to Share a Folder the XP Way in Windows Vista Similar Articles Productive Geek Tips Delete Wrong AutoComplete Entries in Windows Vista MailSvchost Viewer Shows Exactly What Each svchost.exe Instance is DoingFixing "BOOTMGR is missing" Error While Trying to Boot Windows VistaShow Hidden Files and Folders in Windows 7 or VistaAdd Color Coding to Windows 7 Media Center Program Guide TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi

Read the article

Geek Fun: Virtualized Old School Windows – Windows 95

- by Matthew Guay

Last week we enjoyed looking at Windows 3.1 running in VMware Player on Windows 7. Today, let’s upgrade our 3.1 to 95, and get a look at how most of us remember Windows from the 90’s. In this demo, we’re running the first release of Windows 95 (version 4.00.950) in VMware Player 3.0 running on Windows 7 x64. For fun, we ran the 95 upgrade on the 3.1 virtual machine we built last week. Windows 95 So let’s get started. Here’s the first setup screen. For the record, Windows 95 installed in about 15 minutes or less in VMware in our test. Strangely, Windows 95 offered several installation choices. They actually let you choose what extra parts of Windows to install if you wished. Oh, and who wants to run Windows 95 on your “Portable Computer”? Most smartphones today are more powerful than the “portable computers” of 95. Your productivity may vastly increase if you run Windows 95. Anyone want to switch? No, I don’t want to restart … I want to use my computer! Welcome to Windows 95! Hey, did you know you can launch programs from the Start button? Our quick spin around Windows 95 reminded us why Windows got such a bad reputation in the ‘90’s for being unstable. We didn’t even get our test copy fully booted after installation before we saw our first error screen. Windows in space … was that the most popular screensaver in Windows 95, or was it just me? Hello Windows 3.1! The UI was still outdated in some spots. Ah, yes, Media Player before it got 101 features to compete with iTunes. But, you couldn’t even play CDs in Media Player. Actually, CD player was one program I used almost daily in Windows 95 back in the day. Want some new programs? This help file about new programs designed for Windows 95 lists a lot of outdated names in tech. And, you really may want some programs. The first edition of Windows 95 didn’t even ship with Internet Explorer. We’ve still got Minesweeper, though! My Computer had really limited functionality, and by default opened everything in a new window. Double click on C:, and it opens in a new window. Ugh. But Explorer is a bit more like more modern versions. Hey, look, Start menu search! If only it found the files you were looking for… Now I’m feeling old … this shutdown screen brought back so many memories … of shutdowns that wouldn’t shut down! But, you still have to turn off your computer. I wonder how many old monitors had these words burned into them? So there’s yet another trip down Windows memory lane. Most of us can remember using Windows 95, so let us know your favorite (or worst) memory of it! At least we can all be thankful for our modern computers and operating systems today, right? Similar Articles Productive Geek Tips Geek Fun: Remember the Old-School SkiFree Game?Geek Fun: Virtualized old school Windows 3.11Stupid Geek Tricks: Tile or Cascade Multiple Windows in Windows 7Stupid Geek Tricks: Select Multiple Windows on the TaskbarHow to Delete a System File in Windows 7 or Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

Search Results

Search found 9715 results on 389 pages for 'bad passwords'.

Page 352/389 | < Previous Page | 348 349 350 351 352 353 354 355 356 357 358 359 | Next Page >

- by MeIr

- by KGendron

- by Tyler

- by lb01

- by askmike

- by dcerecedo

- by Martin Tuskevicius

- by Zac B

- by Sarah

- by pvorb

- by lb01

- by randy

- by jurajvt

- by BreezyChick89

- by gravyface

- by Elliot.Bradshaw

- by user221486

- by user109717

- by 109221793

- by Rick Strahl

- by mbcrump

- by Rick Strahl

- by ScottGu

- by Mysticgeek

- by Matthew Guay

< Previous Page | 348 349 350 351 352 353 354 355 356 357 358 359 | Next Page >