Search Results

Search found 10798 results on 432 pages for 'port scanning'.

Page 352/432 | < Previous Page | 348 349 350 351 352 353 354 355 356 357 358 359  | Next Page >

• How can find the USB wireless adapter into the dmesg log file?

  - by AndreaNobili

  I am pretty new in Linux (RaspBian for RaspBerry Pi but I think that there are not difference) and I have to install an USB wireless network adapter (the product is the TP-Link TL-WN725N, this one: http://www.tp-link.it/products/details/?model=TL-WN725N ) Now, I think that this is not automatically recognized by my system because if I execute ifconfig command I obtain the following output: pi@raspberrypi ~ $ ifconfig eth0 Link encap:Ethernet HWaddr b8:27:eb:2a:9f:b0 inet addr:192.168.1.8 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:475 errors:0 dropped:0 overruns:0 frame:0 TX packets:424 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:34195 (33.3 KiB) TX bytes:89578 (87.4 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) So now it see only my ethernet network interface and not the wireless. So I was thinkig to try to see into the dmesg, but I don't know what have I to see and how to select it into the dmesg output. For example by the following command I can see the line of the dmesg log file relate to my ethernet port: pi@raspberrypi ~ $ cat /var/log/dmesg |grep -i eth [ 3.177620] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:2a:9f:b0 [ 18.030389] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 19.642167] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 But what can I try to search for the USB wireless adapter? Tnx

  Read the article

• Memory upgrade to 8GB on unibody MacBook

  - by dlamblin

  I bought the 13" unibody MacBook one month prior to it's upgrade to become the new improved 13" unibody MacBook Pro (with unopenable battery compartment, extra 3 hours of battery life, more color gammut, SD slot, firewire 800 port, and a new 8Gb memory limit). My MacBook says it is limited to 4GB of DDR3 1066mhz memory, in 2 SO-DIMMs. But that was written back when you couldn't get 2 4GB SO-DIMMs. Now that you can get them, the very similar MacBook Pro is shipping with 4GB standard, and can be upgraded to 8GB. I've asked (Apple reps), and I'm repeatedly told that my model cannot be upgraded to 8. When I ask for the reason they alway say: "Because that's the published limit at the time your mac was built." I find this unconvincing. If they said: "Because the memory controller in the chipset is limited to 4GB, despite being seemingly identical to the memory controller in the same chipset newest MacBook model," then I'd just take their word for it. Has anyone tried it, or found any research as to whether two 4GB DDR3 1066mhz SO-DIMMs can be installed in the unibody MacBook without FireWire?

  Read the article

• Basic multicast network performance problems

  - by davedavedave

  I've been using mpong from 29west's mtools package to get some basic idea of multicast latency across various Cisco switches: 1Gb 2960G, 10Gb 4900M and 10Gb Nexus N5548P. The 1Gb is just for comparison. I have the following results for ~400 runs of mpong on each switch (sending 65536 "ping"-like messages to a receiver which then sends back -- all over multicast). Numbers are latencies measured in microseconds. Switch Average StdDev Min Max 2960 (1Gb) 109.68463 0.092816 109.4328 109.9464 4900M (10Gb) 705.52359 1.607976 703.7693 722.1514 NX 5548(10Gb) 58.563774 0.328242 57.77603 59.32207 The result for 4900M is very surprising. I've tried unicast ping and I see the 4900 has ~10us higher latency than the N5548P (average 73us vs 64us). Iperf (with no attempt to tune it) shows both 10Gb switches give me 9.4Gbps line speed. The two machines are connected to the same switch and we're not doing any multicast routing. OS is RHEL 6. 10Gb NICs are HP 10GbE PCI-E G2 Dual-port NICs (I believe they are rebranded Mellanox cards). The 4900 switch is used in a project with tight access control so I'm waiting for approval before I can access it and check the config. The other two I have full access to configure. I've looked at the Cisco document[2] detailing differences between NX-OS and IOS w.r.t multicast so I've got some ideas to try out but this isn't an area where I have much expertise. Does anyone have any idea what I should be looking at once I get access to the switch? [1] http://docwiki.cisco.com/wiki/Cisco_NX-OS/IOS_Multicast_Comparison

  Read the article

• VMware Virtual Infrastructure Web Access not starting on Fedora 14

  - by FusionHammer

  I am running a Fedora 14 server with VMware Server 2. When I initially installed VMware Server, everything was working fine. This included accessing Web Access on port 8333 (https) and 8222 (http). I had to perform a server restart and afterwards, the Web Access is not starting when I run: /etc/init.d/vmware-mgmt start The VMware Server Host Agent starts [OK], but the Web Access has no [OK] or [Failed] next to it. I also checked ports 8333 and 8222 by running a netstat, but neither are showing up. In addition, I checked the proxy.log and client.log files in the following directory: /usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/logs/ The proxy.log doesn't have entries in it past 9-18-2012, which is the date the server restart occurred. The client.log is empty. I not sure what is causing this issue or what log files will be helpful in narrowing down the cause. I could re-install VMware Server, but I would like to narrow down the cause as it could occur again with the new re-installed environment.

  Read the article

• Nginx + uWSGI + Django performance stuck on 100rq/s

  - by dancio

  I have configured Nginx with uWSGI and Django on CentOS 6 x64 (3.06GHz i3 540, 4GB), which should easily handle 2500 rq/s but when I run ab test ( ab -n 1000 -c 100 ) performance stops at 92 - 100 rq/s. Nginx: user nginx; worker_processes 2; events { worker_connections 2048; use epoll; } uWSGI: Emperor /usr/sbin/uwsgi --master --no-orphans --pythonpath /var/python --emperor /var/python/*/uwsgi.ini [uwsgi] socket = 127.0.0.2:3031 master = true processes = 5 env = DJANGO_SETTINGS_MODULE=x.settings env = HTTPS=on module = django.core.handlers.wsgi:WSGIHandler() disable-logging = true catch-exceptions = false post-buffering = 8192 harakiri = 30 harakiri-verbose = true vacuum = true listen = 500 optimize = 2 sysclt changes: # Increase TCP max buffer size setable using setsockopt() net.ipv4.tcp_rmem = 4096 87380 8388608 net.ipv4.tcp_wmem = 4096 87380 8388608 net.core.rmem_max = 8388608 net.core.wmem_max = 8388608 net.core.netdev_max_backlog = 5000 net.ipv4.tcp_max_syn_backlog = 5000 net.ipv4.tcp_window_scaling = 1 net.core.somaxconn = 2048 # Avoid a smurf attack net.ipv4.icmp_echo_ignore_broadcasts = 1 # Optimization for port usefor LBs # Increase system file descriptor limit fs.file-max = 65535 I did sysctl -p to enable changes. Idle server info: top - 13:34:58 up 102 days, 18:35, 1 user, load average: 0.00, 0.00, 0.00 Tasks: 118 total, 1 running, 117 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 3983068k total, 2125088k used, 1857980k free, 262528k buffers Swap: 2104504k total, 0k used, 2104504k free, 606996k cached free -m total used free shared buffers cached Mem: 3889 2075 1814 0 256 592 -/+ buffers/cache: 1226 2663 Swap: 2055 0 2055 **During the test:** top - 13:45:21 up 102 days, 18:46, 1 user, load average: 3.73, 1.51, 0.58 Tasks: 122 total, 8 running, 114 sleeping, 0 stopped, 0 zombie Cpu(s): 93.5%us, 5.2%sy, 0.0%ni, 0.2%id, 0.0%wa, 0.1%hi, 1.1%si, 0.0%st Mem: 3983068k total, 2127564k used, 1855504k free, 262580k buffers Swap: 2104504k total, 0k used, 2104504k free, 608760k cached free -m total used free shared buffers cached Mem: 3889 2125 1763 0 256 595 -/+ buffers/cache: 1274 2615 Swap: 2055 0 2055 iotop 30141 be/4 nginx 0.00 B/s 7.78 K/s 0.00 % 0.00 % nginx: wo~er process Where is the bottleneck ? Or what am I doing wrong ?

  Read the article

• Mac WLAN 802.11b+g WPA1 connection issues

  - by Peto

  Hi, I have a Telewell TW-EA510v4 ADSL modem+WLAN router configured as follows: Mode: 802.11b+g Security Mode: WPA1 Pre-shared Key WPA Algorithms: TKIP Connections from only certain MAC addresses have been allowed and the MAC address of my Mac is in that list. The WLAN works just fine with iPhone and an old Acer laptop. It has worked for about two months or so with my MacBook Pro (year and a half or so old model). Ocassionally i've had minor problems with it, which have required either reboot of ADSL modem or reboot of my Mac. However now, for the last week or so I haven't been able to connect to it at all. This is what is what i get in the console when i try to connect: 5.5.2010 20.54.53 airportd[73731] Apple80211Associate() failed -3924 (Invalid PMK) 5.5.2010 20.54.53 Apple80211 framework[584] airportd MIG failed (Associate Event) = -3924 (Invalid PMK) (port = 104599) 5.5.2010 20.54.53 SystemUIServer[584] Error joining WLAN-M: Invalid password (-3924 Invalid master key) The pre-shared key I use is not incorrect. I'm 100% sure of that. The Error Log from the router only says this when I try to connect to it: May 05 21:09:54 home.gateway:i802_1x:none: <my mac address> associated May 05 21:10:00 home.gateway:i802_1x:none: <my mac address> disassociated May 05 21:10:01 home.gateway:i802_1x:none: <my mac address> disassociated Any ideas or tips to troubleshoot this further?

  Read the article

• New XPC: No video, no ethernet link, but drive spins

  - by Mike Pennington

  I bought a Shuttle XPC SH67H3 with integrated video. I installed: An Intel i5 2450P 16GB DDR3 RAM A SATA hard drive from my old linux server that still is bootable I have both power connectors plugged into the motherboard. I realize that the Intel i5-2450P doesn't have video capabilities; however, the drive spins like it's doing something useful. It seems like I should get an ethernet link light when I fire this up. I plan to run this headless anyway, so it would be really nice if I could figure out how to run this without a video card at all. I know the IP address and login info for the linux install on the disk. I plugged in speakers, but get no bios beeps when I power it up. Shuttle's bios manual has nothing in there that indicates I should have problems in this configuration. My questions: Is there a reason that the missing video card would block usage of the ethernet port? Are there settings on the motherboard / bios I can change to get this working?

  Read the article

• New AD-DC in a new Site is refusing cross-site IPv4 connections

  - by sysadmin1138

  We just added a new Server 2008 (sp2) Domain Controller in a new Site, our first such config. It's over a VPN gateway WAN (10Mbit). Unfortunately it is displaying a strange network symptom. Connections to the SMB ports (TCP/139 and TCP/445) are being actively refused... if the connection is coming in on pure IPv4. If the incoming connection is coming by way of the 6to4 tunnel those connections establish and work just fine. It isn't the Firewall, since this behavior can be replicated with the firewall turned off. Also, it's actually issuing RST packets to connection attempts; something that only happens with a Windows Firewall if there is a service behind a port and the service itself denies access. I doubt it's some firewall device on the wire, since the server this one replaced was running Samba and access to it from our main network functioned just fine. I'm thinking it might have something to do with the Subnet lists in AD Sites & Services, but I'm not sure. We haven't put any IPv6 addresses in there, just v4, and it's the v4 connections that are being denied. Unfortunately, I can't figure this out. We need to be able to talk to this DC from the main campus. Is there some kind of site-based SMB-level filtering going on? I can talk to the DC's on campus just fine, but that's over that v6 tunnel. I don't have access to a regular machine on that remote subnet, which limits my ability to test.

  Read the article

• subdomains to different VMs on one IP address

  - by efbenson

  I have a setup at home with an ESXi server Freenas server and several win7 clients. I have a domain refactoringme.com I set the @ and WWW domain record to my (current) IP address. I then forwarded port 80 to my local win2k3 server on my Linksys router and used host name matching to run the 5 test sites I have. That all works. Now I want to use the turnkey machines and move to dedicated VM servers. One for a wiki one for SVN etc. So how do I get www.refactoringme.com to go to one internal IP address and wiki.refactoringme.com to different internal IP address, while they both use the same external IP address? I added the additional record for wiki to my domain and pointed it to @. I figured it had to be involving a real firewall. So I installed PFSense on a VM and set it on the DMZ on my Linksys. From this point I haven't had any luck. I thought that maybe it would be in the DNS Forwarder or maybe in the Rules sections but neither have worked. Am I doing it wrong or on the right track but am missing something. Thanks for all the help.

  Read the article

• svn using nginx Commit failed: path not found

  - by Alaa Alomari

  I have built svn server on my nginx webserver. my nginx configuration is server { listen 80; server_name svn.mysite.com; location / { access_log off; proxy_pass http://svn.mysite.com:81; proxy_set_header X-Real-IP $remote_addr; proxy_set_header Host $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include fastcgi_params; } } Now, i can svn co and svn up normally without having any problem and when i try to commit i get error: $svn up At revision 1285. $ svn info Path: . URL: http://svn.mysite.com/elpis-repo/crons Repository Root: http://svn.mysite.com/elpis-repo Repository UUID: 5303c0ba-bda0-4e3c-91d8-7dab350363a1 Revision: 1285 Node Kind: directory Schedule: normal Last Changed Author: alaa Last Changed Rev: 1280 Last Changed Date: 2012-04-29 10:18:34 +0300 (Sun, 29 Apr 2012) $svn st M config.php $svn ci -m "Just a test, add blank line to config" config.php Sending config.php svn: Commit failed (details follow): svn: File 'config.php' is out of date svn: '/elpis-repo/!svn/bc/1285/crons/config.php' path not found if i try to svn co on port 81 (my proxy_pass which is apache) and then svn ci, it will work smoothly! but why it doesn't work when i use nginx to accomplish it? any idea is highly appreciated.

  Read the article

• Apache 403 Forbidden Error when accessing local web server using local IP address

  - by amjo324

  I have an odd problem when attempting to browse to pages stored on a local web server (Apache 2.2). The pages are served as expected when I browse to localhost or 127.0.0.1 on port 80. Yet when I attempt to browse to the same pages by referencing the local IP address (192.168.x.x), I receive a HTTP 403 (Forbidden) error. In essence, http://localhost:80 works but 192.168.x.x:80 doesn't even though I'm specifying the IP of the local machine. You may be thinking "who cares? just use localhost". However, this is the first step in troubleshooting why I cannot remotely access these pages from different hosts on my LAN. I'm presuming this can't be a firewall issue as I'm only connecting to the local machine. Even so, I verified there was no iptables rules that could be having an effect. I've checked the Apache error logs and the corresponding line of relevance is: [Sat Oct 19 07:38:35 2013] [error] [client 192.168.x.x] client denied by server configuration: /var/www/ I've inspected most of the apache config files and they don't appear to differ from what you would expect with a default install. I can't see anything in apache2.conf that would be a problem and httpd.conf is an empty file. This is an excerpt from /etc/apache2/sites-enabled/000-default: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> Any insight as to where I can look next to find a solution ? Thanks in advance.

  Read the article

• Unable to connect to shared (iscsitarget) dvd-rw drive on ubuntu karmic box

  - by Develop7

  Intro I have desktop with DVD-RW drive that runs primarily on Linux (namely Ubuntu 9.10). My wife has netbook that rins Windows XP with no cd/dvd drive. There's also LAN through our ADSL modem/router. I've "ported" (actually, I've just grabbed sources and ran dpkg-buildpackage) iscsitarget package from Ubuntu Lucid to Karmic (here are packages), installed it (sudo aptitude install iscsitarget; sudo m-a a-i iscsitarget) and configured it in the following way (/etc/ietd.conf): Target iqn.2020-01.local.develop7-desktop:storage.disc.dvdrw Lun 0 Path=/dev/sr0,Type=blockio #I've skipped commented lines Also, I've opened port 3260 with ufw: $ sudo ufw status | grep 3260 3260 ALLOW 192.168.1.0/24 Problem But (here's the trouble) I still can't connect to this target from Windows box. Microsoft Software iSCSI Initiator screams "Logon failure" upon connect attempt, and, respectively, fails to connect. After unsuccessful connection attempt I've noticed this line in dmesg | tail's output: iscsi_trgt: ioctl(299) invalid ioctl cmd c078690d Question So the question is — what's wrong with my config/iSCSI target/whatever else? Or, in short — what I'm doing wrong? Thanks in advance.

  Read the article

• Unable to connect to shared (iscsitarget) dvd-rw drive on ubuntu karmic box

  - by develop7

  Preface: I have desktop with DVD-RW drive that runs primarily on Linux (namely Ubuntu 9.10). My wife has netbook that rins Windows XP with no cd/dvd drive. There's also LAN through our ADSL modem/router. I've "ported" (actually, I've just grabbed sources and ran dpkg-buildpackage) iscsitarget package from Ubuntu Lucid to Karmic (here are packages), installed it (sudo aptitude install iscsitarget; sudo m-a a-i iscsitarget) and configured it in the following way (/etc/ietd.conf): Target iqn.2020-01.local.develop7-desktop:storage.disc.dvdrw Lun 0 Path=/dev/sr0,Type=blockio #I've skipped commented lines Also, I've opened port 3260 with ufw: $ sudo ufw status | grep 3260 3260 ALLOW 192.168.1.0/24 But (here's the trouble) I still can't connect to this target from Windows box. Microsoft Software iSCSI Initiator tells "Logon failure" upon connect attempt. After unsuccessful connection attempt I've noticed this line in dmesg | tail's output: iscsi_trgt: ioctl(299) invalid ioctl cmd c078690d So the question is — what's wrong with my config/iSCSI target/whatever else? Or, in short — what I'm doing wrong? Thanks in advance.

  Read the article

• Headless VirtualBox VM NAT Network

  - by dirt

  I have a remote linux server accessible through SSH only. My goal is to host multiple Virtual Machines on this host server using VirtualBox. The host server has 1 IP address, so NAT will be used to route to the VMs for example 10022 will forward to server1:22 and 20022 will forward to server2:22. I have installed VirtualBox and copied a pre-configured CentOS VM to the host server. I start the VM, but cannot establish a connection to the server for example ssh -p 10022 127.0.0.1 times out. I've tried many things: Method 1: Copied existing .vdi, attached to new VM Method 2: Imported .Ova VM (thought it would help any MAC re-init issues?) NAT network type, tried natnet1 192.168/16 and 10.0/16 VBoxManage modifyvm "hermes.awoms.com" --natnet1 "192.168/16" Port forwarding with and without specifying VM ip in modifyvm --natpf1 command VBoxManage modifyvm "hermes" --natpf1 "guestssh,tcp,,10022,,,22" VBoxManage modifyvm "hermes" --natpf1 "guestssh,tcp,,10022,192.168.0.15,22" I can't see if VM is even booting (VBoxHeadless "hermes" --start & runs with no errors) I can't tell if VM is getting an IP address Is there anything else I can do to get more information from VirtualBox or the VM starting up when the only access I have is SSH?

  Read the article

• With WebMatrix, How do I Connect to a MySQL Database on a Colleague's Machine?

  - by Ash Clarke

  I have scoured Google trying to discover how to do this, but essentially I want to connect to a colleague's MySQL database for working together on a Wordpress installation. I am having no luck and keep getting an error about the connection not being possible: Unable to connect to any of the specified MySQL hosts. MySql.Data.MySqlClient.MySqlException (0x80004005): Unable to connect to any of the specified MySQL hosts. at MySql.Data.MySqlClient.NativeDriver.Open() at MySql.Data.MySqlClient.Driver.Open() at MySql.Data.MySqlClient.Driver.Create(MySqlConnectionStringBuilder settings) at MySql.Data.MySqlClient.MySqlPool.GetPooledConnection() at MySql.Data.MySqlClient.MySqlPool.TryToGetDriver() at MySql.Data.MySqlClient.MySqlPool.GetConnection() at MySql.Data.MySqlClient.MySqlConnection.Open() at Microsoft.WebMatrix.DatabaseManager.MySqlDatabase.MySqlDatabaseProvider.TestConnection(String connectionString) at Microsoft.WebMatrix.DatabaseManager.IisDbManagerModuleService.TestConnection(DatabaseConnection databaseConnection, String configPathState) at Microsoft.WebMatrix.DatabaseManager.Client.ClientConnection.Test(ManagementConfigurationPath configPath) at Microsoft.WebMatrix.DatabaseManager.Client.DatabaseHierarchyInfo.EnsureLoaded() The connection details are copied from my colleague's connection string, with the exception of the server being modified to match the IP address of his machine. I'm not sure if there is a firewall port I have to open or a configuration file I have to modify, but I'm not having much luck so far. (There is a strong chance that, by default, web matrix / iis express doesn't set the mysql database it creates to accept remote connections. If anyone knows how to change this, that would be grand!) Anyone have any ideas?

  Read the article

• error in auth.log but can login; LDAP/PAM

  - by Peter

  I have a server running OpenLDAP. When I start a ssh-session I can log in without problems, but an error appears in the logs. This only happens when I log in with a LDAP account (so not with a system account such as root). Any help to eliminate these errors would be much appreciated. The relevant piece from /var/log/auth.log sshd[6235]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=example.com user=peter sshd[6235]: Accepted password for peter from 192.168.1.2 port 2441 ssh2 sshd[6235]: pam_unix(sshd:session): session opened for user peter by (uid=0) pam common-session session [default=1] pam_permit.so session required pam_unix.so session optional pam_ldap.so session required pam_mkhomedir.so skel=/etc/skel umask=0022 session required pam_limits.so session required pam_unix.so session optional pam_ldap.so pam common-auth auth [success=1 default=ignore] pam_ldap.so auth required pam_unix.so nullok_secure use_first_pass auth required pam_permit.so session required pam_mkhomedir.so skel=/etc/skel umask=0022 silent auth sufficient pam_unix.so nullok_secure use_first_pass auth requisite pam_succeed_if.so uid >= 1000 quiet auth sufficient pam_ldap.so use_first_pass auth required pam_deny.so pam common-account account [success=2 new_authtok_reqd=done default=ignore] pam_ldap.so account [success=1 default=ignore] pam_unix.so account required pam_unix.so account sufficient pam_succeed_if.so uid < 1000 quiet account [default=bad success=ok user_unknown=ignore] pam_ldap.so account required pam_permit.so account sufficient pam_ldap.so account sufficient pam_unix.so

  Read the article

• Hostname and SSL (apache) issue on Debian

  - by user105566

  I have been trying to setup SSL virtual host ServerAdmin [email protected] ServerName moclm.tap.pt DocumentRoot /var/www/tapme/ <Directory /> Options FollowSymLinks AllowOverride All Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> <Directory /var/www/tapme/> Options -Indexes FollowSymLinks MultiViews AllowOverride All #Order allow,deny #allow from all </Directory> SSLEngine on SSLCertificateFile /etc/ssl/moclm.cer SSLCertificateKeyFile /etc/ssl/moclm.pem </VirtualHost> For some reason, the server automatically redirect to SSL (http:// to https://). The apache is not configured to redirect and application was working fine on port 80 only. I have no knowledge how the internal network works as i am working remotely. The SSL error logs show: [Tue Oct 02 22:40:32 2012] [error] Hostname linemnt01.tap.pt provided via SNI and hostname moclm.tap.pt provided via HTTP are different I thought may be the hostname has some issue and have changed the hostname of the server from "linemnt01.tap.pt" to "moclm.tap.pt" but the issue is still there. I am getting the following error on browser: Bad Request Your browser sent a request that this server could not understand. i have /etc/hosts: 127.0.0.1 localhost.localdomain localhost moclm.tap.pt moclm and openssl returns: openssl verify -CAfile cert-CA.cer moclm.cer moclm.tap.pt.cer: OK I have been trying to troubleshoot the issue but no luck. Need help Thanks

  Read the article

• Install mod_perl2 on Apache 2.2.14 (Ubuntu10.04)

  - by MICADO

  I have installed via synaptic package ibapache2-mod-perl2. I tried this line in httpd.conf: "LoadModule perl_module modules/mod_perl.so" Apache tells me when I reload the server : "[warn] module perl_module is already loaded, skipping". Well ok, but when i try to look in the browser to a repertory i don't have access .Apache send me the error : Forbidden You don't have permission to access /cgi-bin/ on this server. Apache/2.2.14 (Ubuntu) Server at 192.168.0.10 Port 90 But this should show modperl is installed and that's not the case... I would like my virtual host that follows run with mod_perl2 <VirtualHost v1:80> ServerAdmin webmaster@localhost ServerName v1 DocumentRoot /var/www/v1 <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/v1/html/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /var/www/v1/cgi-bin/ <Directory "/var/www/v1/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> I'd like to know how to configure mod_perl2. Do i have to change something in the apache configuration file to make my cgi repertory works with mod_perl2? Thanks to any help!

  Read the article

• Bugzilla email issue

  - by xian

  My bugzilla system keep hit the following error: There was an error sending mail from '[email protected]' to '[email protected]':Can't send data I think that is some problem with my setting and configuration. First is the urlbase I have tried setting it to bugzilla.example.com, and http://127.0.0.1:81/, and http://10.0.0.236/ (My laptop IP address, I use this laptop to set up bugzilla) but the error still persists. Actually what should I put in the urlbase field? Parameter = Email Under mail_delivery_method, i choose SMTP. Under mailfrom, I put bugzilla-daemon. smtpserver, I tried leaving it blank, or setting it to 220.181.12.12 before, but could not solve my problem For my sql, the following is the data and command I used: C:\mysql\bin>mysql --user=root -p mysql Enter password: 1234 (When I install mysql into my laptop, it ask me to key an username and password, i have key in username as 'cvuser' and password as '1234', but here never ask me to key in any username) Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 1 Server version: 5.5.15 MySQL Community Server (GPL) mysql> GRANT ALL PRIVILEGES ON bugs.* TO 'bugs'@'localhost' IDENTIFIED BY '123456'; Query OK, 0 rows affected (0.03 sec) In C:\Bugzilla\localconfig, I put the following info: # # How to access the SQL database: # $db_host = "localhost"; # where is the database? $db_port = 3306; # which port to use $db_name = "bugs"; # name of the MySQL database $db_user = "bugs"; # user to attach to the MySQL database # # Enter your database password here. It's normally advisable to specify # a password for your bugzilla database user. # If you use apostrophe (') or a backslash (\) in your password, you'll # need to escape it by preceding it with a \ character. (\') or (\\) # $db_pass = '123456'; Can someone tell me where my mistake is? I have googled for this issue for few days but still cannot find the solution.

  Read the article

• Can't login via ssh after upgrading to Ubuntu 12.10

  - by user42899

  I have an Ubuntu 12.04LTS instance on AWS EC2 and I upgraded it to 12.10 following the instructions at https://help.ubuntu.com/community/QuantalUpgrades. After upgrading I can no longer ssh into my VM. It isn't accepting my ssh key and my password is also rejected. The VM is running, reachable, and SSH is started. The problem seems to be about the authentication part. SSH has been the only way for me to access that VM. What are my options? ubuntu@alice:~$ ssh -v -i .ssh/sos.pem [email protected] OpenSSH_5.9p1 Debian-5ubuntu1, OpenSSL 1.0.1 14 Mar 2012 debug1: Reading configuration data /home/ubuntu/.ssh/config debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug1: Connecting to www.hostname.com [37.37.37.37] port 22. debug1: Connection established. debug1: identity file .ssh/sos.pem type -1 debug1: identity file .ssh/sos.pem-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9p1 Debian-5ubuntu1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: RSA 33:33:33:33:33:33:33:33:33:33:33:33:33:33 debug1: Host '[www.hostname.com]:22' is known and matches the RSA host key. debug1: Found key in /home/ubuntu/.ssh/known_hosts:12 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: .ssh/sos.pem debug1: read PEM private key done: type RSA debug1: Authentications that can continue: publickey,password debug1: Next authentication method: password [email protected]'s password: debug1: Authentications that can continue: publickey,password Permission denied, please try again.

  Read the article

• Exchange 2003 IMAP not working for some users

  - by John Gardeniers

  We normally don't have a need for IMAP connections from outside the company network but in order to allow a one user to use IMAP on a portable device I've turned it on and opened port 993 on the firewall. When the user in question was unable to get connected I tested this using Outlook remotely. Start by creating a new IMAP account in Outlook using a test account. No problems, it worked perfectly. Now try the same thing using the account of the user who actually needs to connect and it's a no-go. Outlook simply keeps prompting for logon credentials. Next I tried using my own account and that too failed. Testing with a couple of other accounts worked perfectly. Interestingly enough, with my own account I've used IMAP on a MAC before (internally) without a problem and I'm not aware of anything that has changed which could affect IMAP on my account. Checking the user settings in ADUC showed that all accounts have the same Exchange protocol settings. Specifically, IMAP is enabled. A check of the event logs on the server reveals no entries for the connection attempts, making this kind of difficult to debug. Has anyone here encountered such a situation and, even more importantly, what caused it?

  Read the article

• squid will not listen on specific IP

  - by Chris

  I have a public subnet with squid installed. Let's say my subnet is from 1.2.3.2 to 1.2.4.254. When I set the following: http_port 50000 http_port 1.2.3.2:50000 it is working. But when I set: http_port 1.2.4.37:50000 it is not working. It is only working with my first public IP from my subnet. The error I get when it is not working is the following: commBind: Cannot bind socket FD 10 to 1.2.4.37:50000: (99) Cannot assign requested address What is wrong with my configuration? @Zoredache I have a dedicated server and the whole subnet is defined as IP Range. When I use only the port or the first IP and doing netstat -ntlp | grep 46555 I get the following: tcp 0 0 0.0.0.0:50000 0.0.0.0:* LISTEN 25532/(squid ) When I use my specific IP, then the netstat query will show nothing, as the server does not start. I don't want squid to listen on all or the first IP, it is just a specific one it should listen to.

  Read the article

• tail -f and then exit on matching string

  - by Patrick

  I am trying to configure a startup script which will startup tomcat, monitor the catalina.out for the string "Server startup", and then run another process. I have been trying various combinations of tail -f with grep and awk, but haven't got anything working yet. The main issue I am having seems to be with forcing the tail to die after grep or awk have matched the string. I have simplified to the following test case. test.sh is listed below: #!/bin/sh rm -f child.out ./child.sh > child.out & tail -f child.out | grep -q B child.sh is listed below: #!/bin/sh echo A sleep 20 echo B echo C sleep 40 echo D The behavior I am seeing is that grep exits after 20 seconds , however the tail will take a further 40 seconds to die. I understand why this is happening - tail will only notice that the pipe is gone when it writes to it which only happens when data gets appended to the file. This is compounded by the fact that tail is to be buffering the data and outputting the B and C characters as a single write (I confirmed this by strace). I have attempted to fix that with solutions I found elsewhere, such as using unbuffer command, but that didn't help. Anybody got any ideas for how to get this working how I expect it? Or ideas for waiting for successful Tomcat start (thinking about waiting for a TCP port to know it has started, but suspect that will become more complex that what I am trying to do now). I have managed to get it working with awk doing a "killall tail" on match, but I am not happy with that solution. Note I am trying to get this to work on RHEL4.

  Read the article

• Need to get SMTP server on MS Server 2003

  - by Matt Dawdy

  Long story short, client paid networking company to move their website in house. Now I have to figure out how to email out from their website even though they don't have an SMTP server. At least until I install one. Their email is hosted with Gmail right now (the client's domain through Google App for Your Domain). I changed my code to connect as one of their users "[email protected]" and send email. Worked great for about 12 hours. All of a sudden none of the automated emails are going out now, and google is sending the emails back saying that it is a permanent failure and Message Rejected. The link they direct me to, http://mail.google.com/support/bin/answer.py?answer=69585 is telling me that our emails look like spam. They aren't. They are emails we send to out clients about the status of their applications. Seriously, they are NOT spam. So...long story short is out the window, sorry...but I need to get an SMTP server setup inside their domain that I can send emails out of. This thing won't need to receive emails ever, and really only needs 1 email account customercare. What can I do? Will I have to have the networking company open a port in the firewall? Is there one built into Server 2003?

  Read the article

• Connecting to MySQL Server from PHP Command Line (MAMP)

  - by Austin White

  First of all, I'm using Mac OSX 1.6, MAMP 1.9, PHP 5.3.4, and MySQL 5.1.44. I'm in the process of setting up a video encoding service for a site using Chris Boulton's PHP-Resque and Redis. Once the worker process is fired and the videos have been encoded, I need to save their locations to a mysql database. The php script is being run from the shell, so that is where the issue begins. I import the mysql settings and when it attempts to connect, I get the following errors: Warning: mysqli::mysqli(): php_network_getaddresses: getaddrinfo failed: nodename nor servname provided, or not known in /Users/austingym/Documents/Dropbox/Website/htdocs/homefree/lib/MySQLi_Extended.class.php on line 24 Warning: mysqli::mysqli(): [2002] php_network_getaddresses: getaddrinfo failed: nodename nor servn (trying to connect via tcp://MYSQL_SERVER:3306) in /Users/austingym/Documents/Dropbox/Website/htdocs/homefree/lib/MySQLi_Extended.class.php on line 24 Warning: mysqli::mysqli(): (HY000/2002): php_network_getaddresses: getaddrinfo failed: nodename nor servname provided, or not known in /Users/austingym/Documents/Dropbox/Website/htdocs/homefree/lib/MySQLi_Extended.class.php on line 24 Warning: mysqli::set_charset(): Couldn't fetch MySQLi_Extended in /Users/austingym/Documents/Dropbox/Website/htdocs/homefree/lib/MySQLi_Extended.class.php on line 32 I realize that the error is occurring because it's trying to connect to tcp://MYSQL_SERVER:3306, when MySQL is on port 8889. I've been reading about Mac OSX and MAMP errors regarding the mysql.sock and I've gone through multiple forums and tried various fixes, but none have worked. I've tried PATH=/Applications/MAMP/Library/bin/:/Applications/MAMP/bin/php5.3/bin/:/opt/local/bin:/opt/local/sbin:$PATH and sudo ln -s /Applications/MAMP/tmp/mysql/mysql.sock /tmp/mysql.sock but neither have worked. I even ran a search on my machine for "3306" to find where it's being set, but because that's the normal default, I'm guessing it's not being set explicitly. Any clues on how to fix this rather challenging error?

  Read the article

< Previous Page | 348 349 350 351 352 353 354 355 356 357 358 359  | Next Page >