Search Results

Search found 10438 results on 418 pages for 'power architecture'.

Page 355/418 | < Previous Page | 351 352 353 354 355 356 357 358 359 360 361 362  | Next Page >

• fglrx-legacy-driver not seeing Radeon HD 4650 AGP

  - by Rocket Hazmat

  I am running Debian Squeeze on an old Dell Dimension 8300 box. It has an AGP Radeon HD 4650 card. I use this machine to mine bitcoins, and today I noticed that the machine had rebooted! My precious uptime! Anyway, my miner wouldn't start, so I figured might as well update my graphics driver, maybe that would fix the issue. I went to amd.com and downloaded the newest driver (12.6 legacy), but after installing it, aticonfig gave an error: aticonfig: No supported adapters detected I uninstalled the driver and figured I'd try to install it from apt. AMD has dropped support for the HD 4000 series in fglrx, forcing me to use fglrx-legacy-driver (currently only in experimental). In order to install this, I had to update libc6 (and some other important packages, like gcc), I had to use their wheezy versions. I finally got glrx-legacy-driver installed, but I still got: aticonfig: No supported adapters detected Why isn't the driver finding my video card? I have a hunch it has something to do with the fact that it's an AGP video card. Here is the output of lspci -v (why does it say Kernel driver in use: fglrx_pci?): 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV730 Pro AGP [Radeon HD 4600 Series] (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices [AMD] nee ATI Device 0028 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 Memory at e0000000 (32-bit, prefetchable) [size=256M] I/O ports at de00 [size=256] Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at fea00000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] AGP version 3.0 Kernel driver in use: fglrx_pci

  Read the article

• How to fix Windows 7 device removal notification loop

  - by Barry Kelly

  Bit of an odd one this. One of our PCs is getting caught in a loop some time after being turned on, usually after a USB storage device has been attached - sometimes an iPod, sometimes a GPS. Specifically, Windows Explorer starts showing a drive icon and letter (E:, as of right now) for the System partition (the small hidden one at the start of the boot drive). Then, the icon disappears. Then it reappears again. And disappears. It does this very quickly, at what looks like maybe 50 times a second. CPU usage in this loop is also very high; averages about 66%. This machine has an i7 920 CPU, which is quad core with hyperthreading; so this usage rate works out to about 5 100% busy threads, along with whatever normal idle load is (particularly Task Manager itself). Inspecting with Process Explorer shows that the device removal notification infrastructure has gone berserk. The threads in system service processes (i.e. apart from Windows Explorer) which are using all the CPU power relate to device notification. The Disk Management MMC snap-in also fails to run when the loop starts. The only way to break the loop, it seems, is to reboot the machine. Anyone seen anything similar to this, and know of a way to fix it? Machine details: Windows 7 x64, fully patched i7 920, 12GB RAM Intel SSD 80GB (X25-M, I believe; not G2) 2TB 5.2K disk for bulk storage AMD HD 5870 Further hardware details await. I'm going to go through and update all drivers I can find.

  Read the article

• My Hard Drive isn't Working

  - by MeCB

  I never use Safely Remove Hardware with Windows XP. It has been working for me for years with my SD card, mouse, hard drive and memory stick. My hard drive has a USB cable and power cord so I can hook it up to any desktop hard drive. Now my hard drives don't like this and I did not know this till now. I am always careful and to wait till it is all finish accessing the USB before I unplug it. Now three of my hard drives can't be seen by Windows, though the others still work. when I hook it up to another computer it works fine. I use the same USB cable to hook up all of my hard drives one at a time. So my USB cable is good. I think that when I unplugged the hard drive this one time, it had a file it still wanted to see and now only this drive does not work only this computer. Then the same thing happens to my other two hard drive after I used it for a week with the same cables. How can I fix this?

  Read the article

• What is making iTunes stop playing when my computer idles?

  - by OwenP

  I've got a rare weekend with nothing to do, so I'm getting some housework done. I have iTunes playing for some background noise. Every 20 minutes or so, it just stops playing; if I move the mouse it starts again. I'm on Windows 7 64-bit. My power settings have my monitor turning off at 10 minutes and hard drives at 20. Both sleep and hibernate are disabled. "Aha!", you say, "Clearly when the hard drive is turned off iTunes is stopping!" Not so. I fiddled with the settings and changed them to make the hard drive sleep in 5 minutes, and iTunes kept playing for the 7 minutes I watched it. I'm currently trying to see what happens if I set the hard drive to never turn off, but I'd prefer to leave it at 20 minutes to save minor amounts of energy. (Edit: I just set it to 240 minutes, and it stopped at 20 minutes. It seems tied to when the monitor turns off; that seems odd and I'm testing that now.) What other settings could be the culprit?

  Read the article

• Ubuntu server 10.04 disconnects after short periods of inactivity on my site

  - by Melot

  Hi! I'm new to Ubuntu (installed it for the first time just a couple of days ago on my server). I've Ubuntu Server 10.04 and am just using the terminal, no GUI like Gnome. So far it's working pretty great except for one big thing. Whenever I go to sleep and there's no activity on my server (it's not a big site so active users drop to 0 during the night), the server kind of disconnects. The only thing that can bring the site back online is to restart the whole server. I've tried disabling powersaving by using setterm but that changes nothing. Even if I wake up the server by pressing any key or so the site wont go back online! I've tried just restarting both Apache and MySQL (I'm using LAMP-server btw) but not even that works. But as soon as I turn the power off and on at the server, everythings work like normal for a couple of minutes of inactivity (~5-15 minutes I'd guess) and then it's down again unless someone logs in to the site and is active. I was previously using XAMPP on my laptop with Windows XP and that worked 24/7 so I don't think it's anything with my router or ISP. This is driving me crazy! My site is down all the time I'm in school as I have no possibility to restart the server if it becomes offline. Does anyone have a clue to what could be wrong?

  Read the article

• PHP Web Server Solution (Apache/IIS)

  - by njk

  I apologize if this is too broad or belongs on Super User (please vote to move if it does). I'm in the process of creating requirements for an internal PHP web server to submit to our architecture team and would like to get some insight whether to use a Windows or *nix platform and what applications would be required. The server will host a small PHP application that will be connecting to SQL Server. The application will need to send mail. We would also like to incorporate a FTP server to allow files to be dropped in. From what I've read regarding a Windows platform using IIS, it seems as though IIS would only be advantageous if using a .NET or ASP application. Does IIS have mail functionality? Or how is mail traditionally configured (esp. on *nix)? Also, does IIS have directory configuration functionality like Apache does with .htaccess? For a Windows based solution; IIS (comes with FTP) Apache (has mod_ftp module) For a *nix based solution; Apache

  Read the article

• Minecraft server hosting hardware specifications [on hold]

  - by Andrew Wright

  I am planning on purchasing a server to rent off Minecraft game servers, largely to friends. I am planning on purchasing a 128GB RAM server to save on colocation costs (as I am likely to need more than 32GB and would have to rent 2U of space...) I am hoping for some advice about the processing power needed to deal with this level of RAM. The servers will be run in a shared environment on linux in a VM to make backups easier. The server I have in mind is dual CPU. I have been considering at the low end dual Xeon E5-2609V2 Quad-Core 2.5Ghz, and at the high end dual Xeon E5-2650V2 Eight-Core 2.6Ghz. The difference between these is 6.4 GT/s and 8 GT/s and £3000 for the lower spec server, £4300 for the higher spec. I was hoping I could get advice about whether it is worth paying for the extra/higher speed processor or if I would be wasting my money? Thank you for any help - I appreciate that this is not directly related to professional system administration.

  Read the article

• How many connections are allowed to a Windows 7 Home Premium shared folder or printer?

  - by lcbrevard

  I have a client who runs a small business with 4 desktop systems, two of which are inexpensive [ The XP Pro system is currently being used as a file "server" for time sheets and QuickBooks data. It also shares an HP ink jet printer. The client wishes to decommission this system because (1) it's ugly [it is] and (2) it uses too much power [it does]. If we share a folder on one of the Windows 7 Home Premium systems will there be a problem connecting to it with up to 3 other computers? What about the printer sharing? I vaguely remember seeing that Windows 7 is less usable for "server" purposes and has severe restrictions on the number of clients. But I cannot seem to find those numbers. In my own network (over 12 systems) we have no problem sharing from Windows 7 Ultimate to a few other systems where needed. I am embarrassed that I cannot seem to find the answer to this in a couple of days of searching. I can do an anytime upgrade of one of these systems to Pro if that would improve the ability to share from it. I am not able to convince the client to put a "real server" into their network.

  Read the article

• How many connections are allowed to a Windows 7 Home Premium shared folder or printer?

  - by lcbrevard

  I have a client who runs a small business with 4 desktop systems, two of which are inexpensive [ The XP Pro system is currently being used as a file "server" for time sheets and QuickBooks data. It also shares an HP ink jet printer. The client wishes to decommission this system because (1) it's ugly [it is] and (2) it uses too much power [it does]. If we share a folder on one of the Windows 7 Home Premium systems will there be a problem connecting to it with up to 3 other computers? What about the printer sharing? I vaguely remember seeing that Windows 7 is less usable for "server" purposes and has severe restrictions on the number of clients. But I cannot seem to find those numbers. In my own network (over 12 systems) we have no problem sharing from Windows 7 Ultimate to a few other systems where needed. I am embarrassed that I cannot seem to find the answer to this in a couple of days of searching. I can do an anytime upgrade of one of these systems to Pro if that would improve the ability to share from it. I am not able to convince the client to put a "real server" into their network.

  Read the article

• Why doesn't the value in /proc/meminfo seem to map exactly to the system RAM?

  - by Eric Asberry

  The values in /proc/meminfo for MemTotal don't make sense. As a human, eyeballing it, it seems to roughly correspond to the installed RAM, but for using it to display the installed RAM from an automated utility it appears to be inexact, and inconsistent. For a system with 1G of RAM, I would expect the MemTotal line to have a value of 1048576 - 1024*1024. But instead, I'm seeing 1029392. On another 4G box, I'm seeing 3870172, which is not a multiple of 1024, and it's not even close to 1029392*4. On an 8G box, I get 8128204, which again seems to have no correlation to the other values, nor is it a multiple of 1024. I'm trying to use this information to report the RAM on a status web page. My work-around is to just "round" it to the nearest 1G multiple, but I'd like to understand why these values seem inconsistent and don't match my expectations. Can somebody fill me in on what I'm missing here? EDIT: To expand on the accepted answer below.... The reference can be found here. Also of interest to me from that page, which explains the inconsistency, is this bit: meminfo: Provides information about distribution and utilization of memory. This varies by architecture and compile options. ...

  Read the article

• Specific issue on data pump API in oracle

  - by Median Hilal

  I have a client/server architecture. Using an Oracle dbms on the database server side. I need to perform a user-triggered (from client side) backup of the database, where the best way to perform that is using a stored procedure on the server side which the client may call, as the client has no oracle tools to perform the backup. I've searched thorough inside available solutions and have found that using a stored procedure is the best way. Well, then I found that using oracle data pump API is the best way to use inside a PL/SQl stored procedure. My specific questions about the API are... I would like to ask about two issues ... ---- The first ----- the detach function to detach the handler, is it necessary to be used at the end of the procedure? and what if I don't use it? I read the Oracle documentation but I didn't get their point, they say it doesn't terminate the job but indicates that the user is not interested in it, an when I use detach at the end of my procedure the exported .dmp file disappears. ---- The second ----- to perform a user (client side) triggered back up as the modification are only to the data, I used TABLE parameter for the export operation. But the version parameter... what should it be? I also read the documentation but couldn't determine what I need (LATEST or COMPATIBLE) ? Thanks

  Read the article

• UEFI boot options gone

  - by user1797930

  I ran into some issues booting Windows after trying to make a complete backup of the disc. After searching for information about some of the error codes, I found advise to change some BIOS settings, but instead I thought I would just "restore defaults" to make sure all settings were set as originally intended. After doing so, all UEFI boot options except for "Windows Boot Manager" are gone. That means, including the CD/DVD drive, so I cannot even boot from a recovery DVD anymore - and as explained, Windows is not able to boot either. Do you have any advice? When I added a secondary drive originally, it was automatically added to the boot options menu. Even when removing and re-adding the drive physically, the option does not appear again. I have tried unplugging power, and hold down start button for 10 seconds, and boot afterwards - no change. It's a laptop so removing CMOS battery is not an option. I have read information that it is an issue with data removed from NVRAM, but I am unable to find a way to recover it. "Add new boot options" requires a path - but the CD/DVD was originally available without any CD's in the drive - so there is no path available to add the drive. I did try to open EFI shell, but it seems not to be embedded in the UEFI/BIOS. It just says "not found". I'm really lost here - any advice is appreciated.

  Read the article

• Dual Monitor + Virtual Desktop software (plus for cube)

  - by xenithorb

  I've recently purchased another monitor, my first one being a TV and being much larger. I now sit at a desk and use my shiny new 24" LED more often, but I like to extend the desktop into the TV. The problem presented with this is to save power and the longevity of my 47" VIZIO, I try to keep it off when possible. What I'm seeking sounds very simple - If any of you have ever used Compiz or Deskspace (Yod'm) - You'll know what im referring to when I talk about a "cube." The most important functionality I'm looking for is the ability to scroll desktop contents between both displays and virtual desktops. Deskspace does and excellent job of presenting an attractive cube, but it creates a separate cube and virtual desktop space for the second extended monitor (now the TV) - Again, what I'm looking to do is scroll between virtual desktops, by passing through both monitors. The net effect of this functionality would allow me to scroll the contents of the extended monitor to the first monitor should a window get caught there without having to turn on the TV. So imagine the horizontal portion of a cube as being actual real monitors - is there anything that allows one to rotate desktops between displays?

  Read the article

• Apache not routing to tomcat on correct Virtual host

  - by ttheobald

  We are looking at moving from Websphere to Tomcat. I'm trying to send traffic to tomcat from apache web server based on the virtual host directives in apache web server. After some playing around I have it sort of working, but I'm noticing that if I have a JKMount directive in the first VirtualHost in apache, all virtualHosts will send to the application server. If I have the JKMount in Virtual hosts further down in the configs, then only that VirtualHost works with the request. For Example, with the configs below here are my symptoms mysite.com/Webapp1/ -- I resolve to the proper application mysite2.com/Webapp1/ -- I resolve to the proper application (bad!) mysite.com/MonitorApp/ -- I resolve to the proper application mysite2.com/MonitorApp/ -- I resolve to the proper application (bad!) mysite.com/Webapp2/ -- I DO NOT get to the app (good) mysite2.com/Webapp2/ -- I resolve to the proper application Here's what my web server virtualhosts look like. <VirtualHost 255.255.255.1:80> ServerName mysite.com ServerAlias aliasmysite.ca ##all our rewrite rules JkMount /Webapp1/* LoadBalanceWorker JKmount /MonitorApp/* LoadBalanceWorker </VirtualHost> <VirtualHost 255.255.255.2:80> ServerName mysite2.com ServerAlias aliasmysite2.ca ##all our rewrite rules JkMount /Webapp2/* LoadBalanceWorker </VirtualHost> we are running apache webserver 2.2.10 and tomcat 7.0.29 on Solaris10 I've posted an image of our architecture here. http://imgur.com/IFaA6Rh I HAVE not defined VirtualHosts on Tomcat. Based on what I've read, my understanding is that it's only needed if I'm accessing Tomcat directly. Any assistance is appreciated. Edit Here's my worker.properties. worker.list= LoadBalanceWorker,App1,App2 worker.intApp1.port=8009 worker.intApp1.host=10.15.8.8 worker.intApp1.type=ajp13 worker.intApp1.lbfactor=1 worker.intApp1.socket_timeout=30 worker.intApp1.socket_connect_timeout=5000 worker.intApp1.fail_on_status=302,500,503 worker.intApp1.recover_time=30 worker.intApp2.port=8009 worker.intApp2.host=10.15.8.9 worker.intApp2.type=ajp13 worker.intApp2.lbfactor=1 worker.intApp2.socket_timeout=30 worker.intApp2.socket_connect_timeout=5000 worker.intApp2.fail_on_status=302,500,503 worker.intApp2.recover_time=30 worker.LoadBalanceWorker.type=lb worker.LoadBalanceWorker.balanced_workers=intApp1,intApp2 worker.LoadBalanceWorker.sticky_session=1

  Read the article

• Why would my network slow down?

  - by monkthemighty

  The network at my work has about 40 computers on it and a quite a few printers. When there are a lot of people working the network will be slow. I can test the ping between my computer and the router and it will keep rising, sometimes to the point that it times out. The router we are using is running Ubuntu on a atom processor and it has 4gb of ram. When the network slows the process Ksoftirq will be using most if not all of the processing power. I have found that Ksoftirq is a process that handles irq requests. Also when the network slows down I have captured packets from the router and using tshark and looked at it using wireshark on my laptop. With the capture show a lot of packets with TCP Dup ACK and TCP Retransmissions. The destinations of the TCP Dup and TCP retransmissions are to most of the computers on the network but there are some that are far more than others. What could this problem be caused by?

  Read the article

• Join multiple consecutive SQLite database dump files into 1 common database? Purpose: Search through ENTIRE Chrome Browsing History

  - by porg

  Google Chrome 's default web browsing history search engine only lets you access the records of the recent 100 days. Nevertheless in your application data, Chrome keeps your entire browsing history in SQLite database files, with the file naming scheme of "History Index YYYY-MM". I am looking for a way to search… …through my entire browsing history, …with sophisticated filters (limit search terms to certain fields such as URL, domain, title, body text; wildcard or regex terms, date ranges). … in … …either some ready-made software. eHistory came close, as it can limit terms to fields, but it lacks wildcards/regexes, and has the same limited time horizon as the default search. Beyond that, I could not find any suited Chrome extension or standalone (Mac) app. …or a command line to join multiple SQLite database files into one database, which I can then query (with the full syntax power). In the spirit of the pseudo code below: Preferred this way: sqlite --targetDatabase ChromeHistoryAll --importFiles /path/to/ChromeAppData/History\ Index* --importOnlyYetUnknownFiles Or if my desired feature --importOnlyYetUnknownFiles is not possible (feature could also be called "avoid duplicate imports by checking UIDs"), then by explicitly only importing files, of which I know, that they have yet not been imported into the ChromeHistoryAll database: cd ChromeAppData; sqlite --databaseTarget ChromeHistoryAll --importFiles YetNotImported1 YetNotImported2 YetNotImported3 All my queries I would then perform in the database "ChromeHistoryAll" P.S.: Additional question of general interest: Is there a way to perform a database query in a temporary database which was created on-the-fly from multiple files? Like: sqlite --query="SQL query" --targetDatabase DbAll --DBtemporaryInRAM --importFiles db1 db2 db3 This is surely not applicable for my Chrome question, as these History Index files have a combined file size of 500MB together, thus such a query would be of bad performance. But it could come handy in other situations.

  Read the article

• Hard Drive problem: is it the SATA controller or the HDD itself?

  - by Drooling_Sheep

  I have a Samsung 1.5TB hard drive hooked up to an ECS H55H-I mini-ITX motherboard. I have XBMC 10 (modified Ubuntu 10.04) installed for use as an HTPC. The hard drive encounters occasional errors during normal use which cause it to be remounted read-only. I have updated the BIOS on the motherboard, changed the SATA cable and moved it to different ports on the motherboard, installed and re-installed the OS (including different versions of XBMC and generic ubuntu), all to no avail. I recently ran tests both with badblocks -sv and smartctl -t long. Both reported no errors. This makes me think the motherboard or SATA controller is probably the issue. Does anyone know of any further tests I can do to help narrow this down? The processor is a Core i3. I forget the model number but it's one of the 32nm ones with on-package graphics. There's no discrete video card or optical drive. The power supply is a 150W Rosewill (pretty sure) that came with the case.

  Read the article

• How to upgrade iPhone 3G to iOS 5 now that iOS 6 is out? [closed]

  - by mmmshuddup

  My friend has an old iPhone 3G and I wanted to upgrade it to iOS 5 because I had read that the performance is actually better with iOS 5 on that phone in spite of the difference in processor power. The problem is that now that iOS 6 is out, iTunes only gives me the option to upgrade to that. I am a little more leery of iOS 6 knowing that it was launched mostly for the iPhone 5 and since that phone has a way faster processor, I would assume that performance would be an issue on the iPhone 3G. How can I, if possible, upgrade just to iOS 5? Note: I would like to avoid having to jailbreak the phone by all means possible. (It's not mine and I don't want to take the risk with a phone that doesn't belong to me.) EDIT: If anyone knows of a good site to get help on questions like this let me know. Apparently you're allowed to ask questions about iPhones here, just not this. Which is completely utter asinine, but oh well. Anyone with helpful ideas, post in the comments please.

  Read the article

• USB Hub vs. Dockinstation USB vs. Laptop USB

  - by Will

  I recently had thougts about my current setup in my office, especially about the UBS ports distribution. Here's my setup: I have a Lenovo T410 docked to a Lenovo Dockingstation Series 3, that providey me with 6 USB ports, which I use all (3 ext. drives, mouse, keyboard, USB Hub of monitor). The USB hub on my ext. monitor (most probably powered by the ext. monitor's power supply) provides me with 2 USB ports, where I use one for my webcam and another for USB sticks. On my T410 itself I have 4 USB slots, that are usually not used, as don't want to mess with USB plugs when undocking my laptop, now and then I plug my printer on one of these, just because I don't have any UBS ports left. Now I'm wondering how fast each of these slots are: I assume that all the 6 USB ports from the dockinstation somehow go through the docking connector on the bottom of my laptop. Does this connector has such a big bandwidth for all these 6 USB ports to perform like if they were dedicated ports as the 4 ones on my laptop? Also how is generally the performance of USB hubs (like the one on my ext. monitor?)?

  Read the article

• External HDD connecting via USB disconnects wireless LAN connection

  - by Kensai

  Strange problem. I have this MEDION Akoya PC that has a dedicated bay to slide an external HDD sold separately. It's very handy indeed cause the slot is providing a fast USB 3 connection and power to the HDD unit, without extra cables. All works fine except this show-stopper behavior to disconnect me from the router once I slide in the unit and it powers up. The moment I connect the unit the (normally) three-four WiFi connections I see in my neighborhood disappear and my own to the router loses its signal strength (no Internet traffic is possible). After a while it throws me off that one as well, never to connect me again as long as the unit is powered. Once I disconnect the HDD the various signals come back and it automatically reconnects to my own. What takes? Are we in front of a serious design fault by MEDION here? Does the spinning of the HDD on top of the PC cause electromagnetic interference strong enough to throw off my WiFi connectivity? Is it a simple USB problem? Some kind of strange hardware conflict? Where should I look?

  Read the article

• SSL certificates: how to use it?

  - by Rod

  I have a central server and I want to purchase a SSL certificate for it. The architecture is based on this central server and many connected web-servers which are on the client-side (one for each user). A client could access both the main server and its local server. Moreover the two servers exchange data between them. I would like client's web browser to trust all servers and always activating https and a secure connection when connecting to them. Assuming I can name all servers on the same domain name (I was thinking about a wildcard certificate anyway), which kind of certificate or use of it can make these secure connections working? There is the possibility that main server and client side server are not connected for a while. Is possible to activate an https connection for a client to its local server in this case? When I will need to renew or change the certificate, I would like to change it just on the main server avoiding to have the need of touch all the servers on the side of clients. Can I do that in some way?

  Read the article

• Computer Turns on Briefly then right back off again.

  - by goddamnyouryan

  So yesterday I came home from work and went to turn my computer on....it turned on for about 5 seconds then promptly turned right back off again...before I ever saw anything on the screen. I tried again, same result. After several attempts, I've found that the length at which it turns on differs. After trying multiple times in a row, it only stays on for about 3 seconds. If I let it rest for a bit it sometimes will stay on for up to a minute (though it never boots, the screen stays black the whole time). I'm not sure what is causing this issue...I built this computer a little more than 2 years ago and this is the first issue I have ever had with it. I did all the usual checks: -It's not the power switch -The capacitors on the motherboard all seem to be in working order -The PSU seems to be fine as it lights up, fan spins, and will sometimes stay on for about a minute period My hope is that the thermal paste on the cpu has degraded and just needs to be re-applied. Does that seem like a reasonable assumption? I'm going to tear the thing apart and do a minimum system build when I get home, but any heads up as to what I should be looking for would be much appreciated. Any thoughts?

  Read the article

• Using Openfire for distributed XMPP-based video-chat

  - by Yitzhak

  I have been tasked with setting up a distributed video-chat system built on XMPP. Currently my setup looks like this: Openfire (XMPP server) + JingleNodes plugin for video chat OpenLDAP (LDAP server) for storing user information and allowing directory queries Kerberos server for authentication and passwords In testing with one set of machines (i.e. only three), everything works as expected: I can log in to Openfire and it looks up the user information in the OpenLDAP database, which in turn authenticates my user with Kerberos. Now, I want to have several clusters, so that there is a cluster on each continent. A typical cluster will probably contain 2-5 servers. Users logging in will be directed to the closest cluster based on geographical location. Something that concerns me particularly is the dynamic maintenance of contact lists. If a user is using a machine in Asia, for example, how would contact lists be updated around the world to reflect the current server he is using? How would that work with LDAP? Specific questions: How do I direct users based on geographical location? What is the best architecture for a cluster? -- would all traffic need to come into a load-balancer on each one, for example? How do I manage the update of contact lists across all these servers? In general, how do I go about setting this up? What are the pitfalls in doing this? I am inexperienced in this area, so any advice and suggestions would be appreciated.

  Read the article

• Online FTP or file sharing service [on hold]

  - by Frede

  We need to share large files with clients, e.g. clients upload a large file, we modify it and later make it available for download. Up until now we've used FTP but this has a number of drawbacks. A lot of management of files and setting up accounts etc. We are therefore considering online alternatives. Requirements: Cheap, 8-) Easy to use, ideally just requiring a web browser, but also possible for power users to connect e.g. via FTPS/SFTP No registration requried for users to upload/download files. We ourselves of course need to be able to login an view uploaded files and upload new files. No per user fee High bandwidth. As files may be GBs in size both upload and download speed cannot be too slow Secure. Encryption during upload/download. No way for users to access uploaded files. Once a user has uploaded a file they (or anyone else besides us) should be able to access the file. To download files users get a link with a password. Ideally the link expires after a set time. No software installation We do NOT need any sync features, backup, versioning etc. Just a quick, easy, secure way for us to share files with our clients. Services like JustCloud, DriveHQ etc seems bloated and "too much" for what we need. What other alternatives exist? Thanks!

  Read the article

• 1 PC, 2 consoles (as in 2 monitors, keyboards and mice)

  - by ciuly

  I have this desire to "kill 2 birds with one shot". Currently, I have 1 server running round the clock, 1 laptop that runs about 8 hours a day, 7 days a week, and a desktop that runs about the same length of time. All 3 are ... old, to say the least. So there is a great need to upgrade (well, the server might handle its job for another year or so, but that only depends on how much time I have to put it to "work"). Now, I'm "dreaming" of only one PC. I'm thinking vmware's ESX. So there will be a VM for the server, a VM for the "laptop" and one for the "desktop". And obviously I'll have to somehow "link" a set of monitor/keyboard/mouse with one of the laptop/desktop VMs. The server doesn't need such things, obviously (it doesn't have them at this moment either). Is something like this possible? ESX is not a requirement, it's just something I found that answers part of my problems, but there still remains the 2 KVM set that needs connecting and "linking" to appropriate VM. Why I would want to do this? well, first of all, it's much cheaper to upgrade one PC than 3. Then, the power consumption is obviously lower. Plus the extra space.Plus it allows me to better separate networks and services. Thanks.

  Read the article

< Previous Page | 351 352 353 354 355 356 357 358 359 360 361 362  | Next Page >