Search Results

Search found 13347 results on 534 pages for 'embedded device'.

Page 356/534 | < Previous Page | 352 353 354 355 356 357 358 359 360 361 362 363  | Next Page >

• Check packet vlan tag using Tap virtual interface

  - by ankit

  Hi all, I am trying to learn how to implement virtual interfaces using the Tap driver. So far my understanding is that using the tap driver I can create a virtual interface and then have a userspace program attach to this interface to analyse the data coming into this device. Now what if I attach a cisco switch to my LAN interface using a TRUNK link, forward all the packets coming into the LAN interface to the virtual tap interface and then in my program attached to this interface do some coding to analyze the vlan tag in the packet and only allow certain vlans to be forwarded to the WAN interface ? Does this sound plausible or is there is flaw in my basic understanding ? Thanks for the help! ankit

  Read the article

• How to block some disks from probes on Linux boot?

  - by Igor Velkov

  My linux host connected to SAN with FC interface. It connect with one path, and see some luns, that can't access, because they need anohter path, not available to host. On boot linux probe all lun he can see, get read error on unaccessible luns, and hangs there for a long-long time. Is there a way to disable any access to some luns at boot time, and later? I found a filters for device ignoration for LVM and MULTIPATH, but it not help during boot process. Generally, lvm still affected too despite of filter, and gives me a IO error on every operation like lvdisplay and vgdisplay, but this is another question.

  Read the article

• Windows 7 installation reboot loop

  - by Auswoolf

  Upgrading from Vista home premium to win 7 hoe premium from DVD ex Digital river on gigabyte VM900m; core 2 duo 2.13GHz 2GB ram; Western digital 250GB HD. Got as far as "Expanding Windows files ...100% the error message "Computer encountered unexpected error... To install windows press OK to restart computer and reinstall windows" The computer then reboots, loads Windows 7 (new logo) a essage that says "setup is starting services" then the error message comes back. I can get into BIOS to change boot priority but the computer just ignores this and goes through the same sequence. At the point of "to boot from CD/DVD press any key" my keyboard is deactivated and i cannot make a choice and the sae sequence occurs. I cannot break the sequence - I have push every key, disconnected every external device including HDMI screen, but nothing stops the loop. Any ideas? Auswoolf

  Read the article

• Setup Cisco RVS4000 QOS for VOIP

  - by andyknas

  Just switched from dedicated T1's with analog phone lines to cable modem with 10/2 uplink. We're having some VOIP call quality issues on the outgoing side when bandwidth is stressed and I need to setup QOS or a VLAN on our RVS4000 router. Currently all phone traffic (talkswitch device and ip phones) are on it's own d-link PoE switch, and all workstations are on a LinkSys 1GB switch. Both switches are plugged into ports on the RVS4000. I'd like to set it up so that the dlink port has ~512Mbsp dedicated to it for voice at all times. It's my understanding that with a VLAN or QOS I can set this up. I've got QOS setup already with port 5060 to have high priority but it doesn't seem to make a difference.

  Read the article

• Unix list absolute file name

  - by Matthew Adams

  Given an arbitrary single argument representing a file (or directory, device, etc), how do I get the absolute path of the argument? I've seen many answers to this question involving find/ls/stat/readlink and $PWD, but none that suits my need. It looks like the closest answer is ksh's "whence" command, but I need it to work in sh/bash. Assume a file, foo.txt, is located in my home directory, /Users/matthew/foo.txt. I need the following behavior, despite what my current working directory is (I'm calling the command "abs"): (PWD is ~) $ abs foo.txt /Users/matthew/foo.txt $ abs ~/foo.txt /Users/matthew/foo.txt $ abs ./foo.txt /Users/matthew/foo.txt $ abs /Users/matthew/foo.txt /Users/matthew/foo.txt What would "abs" really be? TIA, Matthew

  Read the article

• How do I mount a HFS+ dd image in OSX?

  - by Paul McMillan

  I had an HFS+ formatted drive that was going bad and wouldn't mount at all on OSX. I created an image using ddrescue on linux, and was able to save most of it. I can mount the drive and see the data just fine in linux using this: mount -o loop -t hfsplus dd_image mountpoint This doesn't work on my OSX system since hfsplus isn't a valid filesystem type. If I try: mount -t hfs image mountpoint It complains that it needs a block device. What's the fix here?

  Read the article

• Problem after resizing partition for Fedora under Vmware fusion

  - by user20196

  Hi, I am running FC9 under VMware Fusion 3.0 I wanted to resize my /dev/sda2 partition. In order to do that I did the following: 0. changed the size of the vmware file (under VMware settings). 1. rebooted the host to rescue mode without mounted disks 2. fdisk - removed & added /dev/sda2 - i had bigger /dev/sda2 3. lvm pvresize /dev/sda2 4. lvm pvdisplay - it showed me bigger size on /dev/VolGroup00 for /dev/sda2 5. lvm vgchange -a y - device-mapper: reload ioctl failed: Invalid argument - 2 logical volume(s) in volume group "VolGroup00" now active This is not true because there is no /dev/VolGroup00/LogVol00 My whole "/" disappeared. dmsetup table, shows: VolGroup00-LogVol01: 0 2097152 linear 8:2 38338944 VolGroup00-LogVol00: Can some one help me to solve this? Thank You.

  Read the article

• ECMP Load Balancing in JUNOS

  - by SpacemanSpiff

  I'm trying to figure out how to use ECMP load balancing in JUNOS. I know this isn't the best way to load balance, but its quick and dirty and gets done what I need to. In ScreenOS this was pretty easy. Device: SRX220 JunOS: 10.3R2.11 Here's what I've got so far: routing-options { static { route 0.0.0.0/0 { next-hop [ 1.1.1.1 1.1.1.2 ]; metric 10; } } maximum-paths 2; Will that do it? Tom

  Read the article

• NetApp and SQL Server?

  - by Edinor

  Do you have any good or bad experiences to share running SQL Server OLTP Systems on NetApp appliances? I have been working with a small, relatively low-volume cluster with a lower-end NetApp device, and I have found the environment to be generally unstable, at least compared to my experiences with other SANs, iSCSI arrays, and DAS setups. I struggle to believe that RAID DP and WAFL are more than fairy-dust technologies. A solution has been proposed to me that I just need a bigger, better NetApp, with PAM cards and other cool technology I've not heard of, and I feel like I would be better off spending a quarter of that on good direct-attached drives and a beefy server. At the same time, I feel that an Enterprise-class SAN should be something I can count on to be consistently a more stable, better performer than the less expensive solution I might propose. Are you a SQL Server DBA in an OLTP environment and love your NetApp? If you don't like them, why not?

  Read the article

• Unable to browse Server 2008R2 from XP clinets

  - by Dave M

  We have just deployed a Windows 2008R2 server in our Windows 2003 domain. XP clinets are unable to browse in "entire network" and find the new server. It can be accessed by entering \\servername and it can be pinged by name and IP address. Users access shares without issue. Netbios over TCP/IP is enabled. Computer browser is running on the Windows 2008R2 system. Turn on Network Discovery is enabled. These services were started as a result of an MS article Computer Browser DNS Client Function Discovery Resource Publication SSDP Discovery UPnP Device Hosts

  Read the article

• Effects of HTTP/TCP connection handshakes and server performance

  - by Blankman

  When running apache bench on the same server as the website like: ab -n 1000 -c 10 localhost:8080/ I am most probably not getting accurate results when compared to users hitting the server from various locations. I'm trying to understand how or rather why this will effect real world performance since a user in china will have different latency issues when compared to someone in the same state/country. Say my web server has a maximum thread limit of 100. Can someone explain in detail how end user latency can/will effect server performance. I'm assuming here that each request will be computed equally at say 10ms. What I'm not understand is how external factors can effect overal server performance, specifically internet connections (location, or even device like mobile) and http/tcp handshakes etc.

  Read the article

• How to emulate wireless in Virtualbox?

  - by huahsin68

  I have WinXP install in virtualbox which host in Linux. I have a TP-Link (TP-WN321G) USB wifi adapter and have the driver installed inside WinXP. When I plug-in the wifi adapter, there is an option show "Ralink 802.11g WLAN [0101]" in the virtualbox's USB icon, tick on that option, the Device Manager able to detect the hardware which shows TP-Link, but when look into the properties, it says there is no driver was install. I did try to install Ralink driver but still no luck. Just curious why my wifi adapter is TP-Link, but the option show Ralink? May I know how can I emulate the wireless network inside WindowsXP?

  Read the article

• redirect traffic to www.example.com through DNS from example.com

  - by ChrisMuench

  Hello, I have a bit of a unique problem. for the domain (example.com) I want people to go to www.example.com however I'm also throwing GSLB into the mix. for GSLB the devices(one in each datacenter) need to be the nameserver for portion of the domain that they are going to answer for(www.example.com) so I know I can make the NS record of www.example.com just fine and have it point to each GSLB device. However that only helps for www.example.com NOT example.com. I don't want to make my root NS of example.com my GSLB as my enterprise managed DNS provider does an excellent job of all DNS stuff. any ideas?

  Read the article

• Symmetrix gatekeepers on Solaris 10

  - by Milner

  I have some Solaris machines that are connected to EMC Symmetrix for SAN storage. Apparently the Symm has a gatekeeper device that is used with the symmetrix CLI. We don't need the CLI, but I have these gatekeeper devices that constantly fill /var/adm/messages and the like with corrupt label errors. Is there anything I can do (short of deleting the devices on machine start) to get rid of them? Or should I just try to get our SAN guy to get the installer for the CLI? These things are getting annoying, and the devfsadmd daemon keeps rediscovering them on boot.

  Read the article

• Locate rogue DHCP server

  - by Farseeker

  I know this is a serious long shot, but here we go. In the past week or so, for users connected to a particular switch in our network (there are four dumb switches all connected, and it only affects SOME, not all, users on the one switch) are getting DHCP addresses from a rogue DHCP server. I have physically checked every cable plugged into the switch in question to make sure that none of them have a router or wifi point attached to it. I know the IP of the DHCP server, but I cannot ping it, and it does not have a web interface. Does anyone have any suggestions on what I can do to locate it or shut it down? Unfortuantely all the switches are unmanaged, and as mentioned, there's no physical device (that I can find) plugged in to anything. It's getting critical, because it's screwing up the PXE boot of a whole bunch of thin clients.

  Read the article

• CheckPoint VPN-1 SecureClient inability to navigate behind a Linksys WAG300N

  - by AndreaTrasatti

  I have a Linksys WAG300N, I'm accessing my LAN with Wifi and everything works fine on my Windows 7 Enterprise laptop. When I try to connect to my company's VPN the connection succeeds, but I cannot access any internet site either within my work network or public site like Yahoo or Google. In my Linksys control panel I already verified all types of VPNs are enable to passthrough. Normal IPSec and Windows VPN worked in the past without any problems. CheckPoint seems to have a solution, but I do not have the ability to change the IP in my client and of course using another NAT device in between is not a solution for me. Edit: adding link to the Checkpoint solution, https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk26189

  Read the article

• Backup to Synology NAS using rsync or NFS and hardlinks

  - by danilo

  I want to backup data from a Windows (Vista) computer to a Synology NAS (210j). The NAS supports FTP, SMB, NFS and also allows a rsync daemon to be set up. I want to backup different folders to the NAS, but I'd prefer to use the hardlink method to save diskspace (like this script does). With this method, a new folder is created for every backup, but if the file already exists on the target, only a hardlink is created. The filesystem on the Synology device is ext3, so I probably can't use rsyncbackup, as it is made for NTFS. Is there another way to do this backup with hardlink support?

  Read the article

• ifcfg-eth* on CentOS 6.x, but for IPv6 only?

  - by Ray Hoffman

  Could someone kindly provide a skeleton ifcfg-eth0:[X] for creating an alias with a IPv6 address and no IPv4 address? Or, alternatively, what's the IPv6 equivalent of this: in /etc/sysconfig/network-scripts/ifcfg-eth0:1 DEVICE=eth0:1 ONBOOT=yes BOOTPROTO=static IPADDR=42.69.66.66 NETMASK=255.255.255.0 Or does this not even make sense in IPv6 space? I know that I can use, for example: IPV6INIT=yes IPV6ADDR=2600:4200::6900:6666:dead:beef But then do I need to specify that there is no IPv4 address associated with this alias? If so, how? And do I need to also specify the IPV6_DEFAULTGW? Or can it piggyback on the eth0 (unaliased) gateway, which is specifed, like with IPv4 aliases? EDIT: Answered my own question! The easiest way to accomplish this seems to be not to create an alias as with IPV4, but to specify, for example, IPV6ADDR_SECONDARIES=2600:4200::6900:6666:dead:beef on the script for the base interface, e.g. ifcfg-eth0.

  Read the article

• Centos Xen resizing DomU partition and volume group

  - by thepearson

  I have a setup like so: Dom0 LV | DomU Physical Disk | | XVDA1 XVDA2 (/boot) (DomU PV) | VolGroup00 (DomU VG) | | LogVol00 LogVol01 (swap) (/) I am trying to resize the DomU root Filesystem. (VolGroup00-LogVol01) I realize that I now need to resize the partition XVDA2, however when I try doing this with parted on Dom0 it just tells me "Error: Could not detect file system." So to resize the root part VolGroup-LogVol00 shouldn't the process be: # Shut down DomU xm shutdown domU #Resize Dom0 Logical volume lvextend -L+2G /dev/volumes/domU-vol # Parted parted /dev/volumes/domU-vol # Resize root partition resize 2 START END (This is where I get an error) "Error: Could not detect file system." # add the vm volume group to Dom0 lvm kpartx -a /dev/volumes/domU-vol # resize the domU PV pvresize /dev/mapper/domU-pl (as listed in pvdisplay) # The domU volume group should automatically adjust # resize the DomU lv lvextend -L+2G /dev/VolGroup/LogVol00 And then obviously increase the fs, remove the device from kpartx etc The problem is I dont know how to resize the partition? How do I resize this partition so I can run pvresize on the DomU? Thanks

  Read the article

• I2C_SLAVE ioctl in i2c linux driver

  - by zac

  I am supposed to write a simple write and read program for i2c but the problem is that i dont have the device at hand presently to test it so i need my code to be perfect. I am confused about the function of the I2C_SLAVE ioctl.From what i read,this ioctl is used to set the slave address. But we pass the slave address again when performing read/write using ioctl I2C_RDWR via addr in the structure i2c_msg. So then,what is the function of I2C_SLAVE command?Do i need to call it every time i perform a read or write operation? Thank you in advance.

  Read the article

• How to troubleshoot a GPF?

  - by AngryHacker

  I get a GPF dialog box out of the blue fairly often (like about 2 hours after I turn on the computer). It basically says that svchost.exe had a failure... (see the corresponding Event Log entry below). Event Type: Error Event Source: Application Error Event Category: (100) Event ID: 1000 Date: 5/18/2010 Time: 7:41:16 PM User: N/A Computer: DKHA-IPSA Description: Faulting application svchost.exe, version 5.1.2600.5512, faulting module ole32.dll, version 5.1.2600.5512, fault address 0x0004eaa9. Shortly after this error pops up, the computer pretty much grinds to a halt (e.g. some UI elements on the desktop simply do not respond). And I have to do a hard reboot. How do I troubleshoot this type of thing? P.S. The PC has all the latest patches and nothing is missing in the Device Manager.

  Read the article

• Backup strategy for Windows Server 2008 R2 and Hyper-V

  - by winserveradmin

  I am in the process of planning a Hyper-V deployment with SCVMM 2008 R2. I have several VMs on VMWare Player (temporary solution) for stuff like Sharepoint 2007, 2010, and a couple of other server apps. I want to develop a resilient backup plan for this. On the software side, Data Protection Manager 2010 will support all of the server apps I run (sQL Server 2008 R2, Sharepoint, Exchange, etc). But on the hardware side (storage), what is the best way to go? Drobo seems to have issues with Hyper-V juding by a few threads on here and doesn't support DPM 2010 (which is in beta anyway) but not even the 2007 version (see http://www.drobo.com/support/best_practices.php). What storage device would work well? Do I need a home server or just an external usb drive? Capacity wise, 2tb will probably be best so I can have a small archive and implement a round-robin system. Thanks

  Read the article

• Event Tracing for Windows GUI

  - by Ian Boyd

  i want to view tracing events from the Event Tracing for Windows system. As far as i can tell the only client program that exists for connecting to providers is a command line tool that comes with the Microsoft Windows Device Driver Development Kit (DDK), e.g.: tracelog -start "NT Kernel Logger" -f krnl.etl -dpcisr -nodisk -nonet -b 1024 -min 4 -max 16 -ft 10 –UsePerfCounter ... tracelog –stop It then requires a separate command line tool to convert the generated log file into something usable, e.g.: trcerpt krnl.etl -report isrdpc.xml Has nobody come up with a Windows program (ala Performance Monitor, Process Monitor, Event Viewer) that lets me start tracing by pushing a "Go" button, let me see events, and i can stop it with a "Stop" button? Is there GUI for Event Tracing for Windows?

  Read the article

• CORAID using only 1 of the 2 available NICs for AoE traffic

  - by Peter Carrero

  We got 6 CORAID shelves in my workplace. On 2 of them I see AoE traffic on only 1 of the 2 NICs that are attached to the SAN switch. We got jumbo frames enabled on all devices. Both NICs show up when I issue the aoe-interfaces command. This wouldn't bother me too much if the throughput performance observed on the "bad" shelves using bonnie++ wasn't half of the result of the "good" shelves. The "good" shelves are older SR1521 model and they have ReiserFS on their LUNS - not that I think it makes a difference - and the "bad" shelves are newer SR2421 model and have JFS. Any help as to what is going on and how to rectify this would be greatly appreciated. BTW: even the lower performing shelves outperform another iSCSI device we got, but that is another story... Thanks.

  Read the article

• External Hard-Drive Randomly Ejects; Stays On

  - by Kaleb F.

  My 250GB I/O Magic USB external hard-drive randomly disconnects / ejects from the computer after between 2-30 minutes of use. When this happens, the blinking activity light on the front of the hdd turns off; however, the disks can still be heard spinning. Unplugging & replugging in the USB does not reconnect the device and the activity light remains unlit. The only way to continue using it is to flip off then on the power switch of the hdd. The hard-drive was formatted with MBR partition table and 2 NTFS volumes. I recently tried switching to GUID with two Mac OS Extended (Journaled), but the problem remains. This error occurs with my new Macbook Pro with Snow Leopard as well as with my DELL E520 with Windows 7 Ultimate.

  Read the article

< Previous Page | 352 353 354 355 356 357 358 359 360 361 362 363  | Next Page >