Search Results

Search found 18533 results on 742 pages for 'intel visual fortran'.

Page 357/742 | < Previous Page | 353 354 355 356 357 358 359 360 361 362 363 364  | Next Page >

• iwlwifi on lenovo z570 disabled by hardware switch

  - by Kevin Gallagher

  It was working fine with windows 7. The hardware switch is not disabled. I've toggled it back and forth dozens of times. The wifi light never turns on and it always lists as hardware disabled. I have the latest updates installed. I've been searching for solutions, but none of them seem to work for me. I've tried removing acer-wmi. I've tried setting 11n_disable=1. I've tried resetting the bios. I've tried using rfkill to unblock (only removes soft block). I've rebooted dozens of times. The wifi light turns off as soon as grub loads. Edit: I have a usb edimax wireless nic. It shows hardware disabled as well (although rfkill lists as unblocked). If I unload iwlwifi the usb nic works fine. uname -a `Linux xxx-Ideapad-Z570 3.2.0-55-generic #85-Ubuntu SMP Wed Oct 2 12:29:27 UTC 2013 x86_64 x86_64 x86_64 GNU/Linu`x rfkill list 19: phy18: Wireless LAN Soft blocked: no Hard blocked: yes dmesg [43463.022996] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [43463.023002] Copyright(c) 2003-2011 Intel Corporation [43463.023107] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [43463.023190] iwlwifi 0000:03:00.0: setting latency timer to 64 [43463.023253] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000 [43463.023257] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900057c8000 [43463.023261] iwlwifi 0000:03:00.0: HW Revision ID = 0x0 [43463.023797] iwlwifi 0000:03:00.0: irq 43 for MSI/MSI-X [43463.024013] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C [43463.024250] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [43463.045496] iwlwifi 0000:03:00.0: device EEPROM VER=0x15d, CALIB=0x6 [43463.045501] iwlwifi 0000:03:00.0: Device SKU: 0X50 [43463.045504] iwlwifi 0000:03:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3 [43463.045542] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels [43463.045744] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio. [43463.047652] iwlwifi 0000:03:00.0: loaded firmware version 39.31.5.1 build 35138 [43463.047823] Registered led device: phy18-led [43463.047895] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [43463.048037] ieee80211 phy18: Selected rate control algorithm 'iwl-agn-rs' [43463.055533] ADDRCONF(NETDEV_UP): wlan0: link is not ready nm-tool State: connected (global) - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: unavailable Default: no HW Address: 74:E5:0B:4A:9F:C2 Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points lshw -C network *-network DISABLED description: Wireless interface product: Centrino Wireless-N 1000 [Condor Peak] vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 74:e5:0b:4a:9f:c2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-55-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bg resources: irq:43 memory:f1500000-f1501fff lspci 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak]

  Read the article

• CES 2011–Microsoft Keynote Impressions

  - by guybarrette

  Microsoft has been kicking off the CES for a number of years by doing a keynote the evening of the event first day.  This year, SteveB talked about Xbox, Kinect, Windows 7 new laptops, Surface 2 and Windows vNext running on the ARM architecture. Some of the design of the new laptops showed are quite amazing.  This one has a dual screen with no physical keyboard.  The image is split between both screens.  A software keyboard appears when you place your 10 fingers on the lower screen. This one from Samsung has a sliding keyboard somewhat like numerous cell phones have. What I found the most amazing is that Intel was able to miniaturized a full Intel architecture (CPU, motherboard, memory) in a tiny form factor.  Imagine having the power of a full PC running .NET apps in a Zune/iPod form factor! They also showed V2 of the Surface device.  This one is called the Samsung SUR40 for Surface PC.  It’s much sleeker and it will likely loose the BAT (Big Ass Table) moniker  More info here SteveB announced that Windows vNext will run on ARM chips.  I’m intrigued by this announcement (you can read about it here) and I have many questions: -In the past ARM devices were slow, what now makes the ARM architecture able to run Windows? -ARM is 32-bit only, I think. -Does this mean that Intel wasn't able to provide such a lightweight architecture or simply that they weren't interested? -From what I understand, apps would need to be recompiled for ARM. Will we need to do that from an ARM PC or could it be done natively on Intel or on an Intel PC running in an ARM VM?  VS 2012? Ahhhh, smells like a cool PDC is coming up    Clearly it looks like PC have enough power for most of us right now and that the race is now about miniaturization, power consumption and battery life. You can watch the Microsoft CES 2011 keynote here var addthis_pub="guybarrette";

  Read the article

• How do I install gfortran (via cygwin and etexteditor) and enable ifort under Windows XP?

  - by bez

  I'm a newbie in the Unix world so all this is a little confusing to me. I'm having trouble compiling some Fortran files under Cygwin on Windows XP. Here's what I've done so far: Installed the e text editor. Installed Cygwin via the "automatic" option inside e text editor. I need to compile some Fortran files so via the "manage bundles" option I installed the Fortran bundle as well. However, when I select "compile single file" I get an error saying gfortran was missing, and then that I need to set the TM_FORTRAN variable to the full path of my compiler. I tried opening a Cygwin bash shell at the path mentioned (.../bin/gfortran), but the compiler was nowhere to be found. Can someone tell me how to install this from the Cygwin command line? Where do I need to update the TM_FORTRAN variable for the bundle to work? Also, how do I change the bundle "compile" option to work with ifort (my native compiler) on Windows? I've read the bundle file, but it is totally incomprehensible to me. Ifort is a Windows compiler, invoked simply by ifort filename.f90, since it is on the Windows path. I know this is a lot to ask of a first time user here, but I really would appreciate any time you can spare to help.

  Read the article

• How to solve timing problems in automated UI tests with C# and Visual Studio?

  - by Lernkurve

  Question What is the standard approach to solve timing problems in automated UI tests? Concrete example I am using Visual Studio 2010 and Team Foundation Server 2010 to create automated UI tests and want to check whether my application has really stopped running: [TestMethod] public void MyTestMethod() { Assert.IsTrue(!IsMyAppRunning(), "App shouldn't be running, but is."); StartMyApp(); Assert.IsTrue(IsMyAppRunning(), "App should have been started and should be running now."); StopMyApp(); //Pause(500); Assert.IsTrue(!IsMyAppRunning(), "App was stopped and shouldn't be running anymore."); } private bool IsMyAppRunning() { foreach (Process runningProcesse in Process.GetProcesses()) { if (runningProcesse.ProcessName.Equals("Myapp")) { return true; } } return false; } private void Pause(int pauseTimeInMilliseconds) { System.Threading.Thread.Sleep(pauseTimeInMilliseconds); } StartMyApp() and StopMyApp() have been recorded with MS Test Manager 2010 and reside in UIMap.uitest. The last assert fails because the assertion is executed while my application is still in the process of shutting down. If I put a delay after StopApp() the test case passes. The above is just an example to explain my problem. What is the standard approach to solve these kinds of timing issues? One idea would be to wait with the assertion until I get some event notification that my app has been stopped.

  Read the article

• How can I speed up Subversion checkins? (Using ANKH, latest, Visual Studio 2010)

  - by Timothy Khouri

  I've started working on a new web project with some friends... we are using the latest Subversion server (installed last week), the latest version of ANKH. My web project is a whapping 1.5 megabytes (that's with all images, css files, dll's after compiling, pdb files... etc). Checking in even super small changes (literally adding the letter "x" to a few files for testing)... takes FOREVER! (about 10 seconds - I almost killed myself). The ANKH client is measuring in BYTES PER SECOND ... BYTES? per second... I must be doing something wrong. Does anyone what config file has a joke totallyMessWithPeople=true so that I can turn that off or something? Oh, also, changing one "big" file of a super 10k gains speed up to nearly the speed of light (which is apparently 857 bytes per second). Help me obi wan kenobi, your my only hope! EDIT: As a note... my real work project that uses Visual Source Safe 2005 (I know, ouch) uploads files at about 200-500kbps from this very same computer/internet connection.

  Read the article

• What Color is the Windows' System.Control? (Visual Studio Design View)

  - by jp2code

  In Visual Studio Design View, the selection of Form Colors in the Properties Pane are selectable from the "Custom", "Web", and "System" tabs. Of course, the color number can be used, too. When the "System" Tab is selected, the colors in the list depend on what type of Theme the Computer User has set on the PC. I'd like to stick with this, but I need to know how to "read in" the colors. I have controls that I create "on-the-fly" or often need to change a color back after getting the person's attention using a blink/flicker technique. How do I get the list of System Theme colors? Most forms have a BackColor that defaults to "Control", which looks like a very light gray under Windows 7, running the default Windows 7 Theme. I've managed to grab a color by physically reading the ARGB value in code, but I'd rather have a way to access the colors by their Theme Name, if that can be done. public Form1() { Color cControl = this.BackColor; Console.WriteLine(cControl.Name); // there is not always a name! } Does anyone know what I'm talking about?

  Read the article

• What is the process involved in viewing a webservice in a browser from within visual studio?

  - by Sam Holder

  I have created a new VS2008 ASP.Net Web service project, with the default name WebService1. If I right click on the Service1.asmx file and select 'View in Browser' what are the processes that go on to make this happen? I am asking because I have a situation where when I run this from a visual studio project started in our development shell (which sets up a common build environment) I cannot get the web service to show up in the browser. It starts the asp.net development server and creates a single file: C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\root\c43ddc22\268ae91b\hash\hash.web but when I start it from a stand alone project i get a whole slew of files in here: C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\root\edad4eee\d198cf0e\App_Web_defaultwsdlhelpgenerator.aspx.cdcab7d2.vicgkf94.dll C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\root\edad4eee\d198cf0e\service1.asmx.cdcab7d2.compiled etc etc I am trying to debug this but not really getting anywhere. i have inspected the output from VS but the only option I get is for the build output, which is basic and doesn't really contain any information that is useful. I have tried running both versions with DebugView running but no output there either. I would like to know if there are any log files I could look at, or if anyone has any suggestions on how I might be able to debug what is going wrong here? For completeness the output I get when it doesn't work is: Parser Error Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately. Parser Error Message: Could not create type 'WebService1.Service1'. Source Error: Line 1: Source File: /Service1.asmx Line: 1 Version Information: Microsoft .NET Framework Version:2.0.50727.3603; ASP.NET Version:2.0.50727.3082

  Read the article

• Does XAML work with file links in Visual Studio?

  - by Tim

  I'm adding a new WPF project to an existing Visual Studio solution and would like to reuse a bunch of code (C# and xaml) from an existing project within the solution. I've created the new project and added existing files as follows: Right click project Add - Add Existing Item Find the file to reuse, use the arrow next to "Add" and "Add as Link" I now have a nice project set up with all the proper links. However, XAML chokes on these links. For example: <ResourceDictionary.MergedDictionaries> <ResourceDictionary Source="Resources\Elements\Buttons\Buttons.xaml" /> <ResourceDictionary Source="Resources\Elements\TextBox\TextBox.xaml" /> </ResourceDictionary.MergedDictionaries> The files "Buttons.xaml" and "TextBox.xaml" exist as links in my new project. The project builds, but when I run, I get the following XamlParseException: 'Resources\Elements\Buttons\Buttons.xaml' value cannot be assigned to property 'Source' of object 'System.Windows.ResourceDictionary'. Cannot locate resource 'resources/elements/buttons/buttons.xaml'. It seems like the XAML parser is requiring an actual copy of these XAML files to exist in my new project, instead of links. This is exactly what I'm trying to avoid. I want my project to share these files so that any changes get transferred to the other project without hunting and copying. Any insight is appreciated!

  Read the article

• Configuration Error , Finding assembly after I swapped referenced dll out. Visual Studio 2003

  - by TampaRich

  Here is the situation. I had a clean build of my asp.net web application working. I then went into the bin folder under the web app and replaced two referenced dll's with two older version of the same dll's. (Same name etc.) After testing I replaced those dll's back to the new ones and now my application keeps throwing the configuration error === Pre-bind state information === LOG: DisplayName = xxxxx.xxxx.Personalization (Partial) LOG: Appbase = file:///c:/inetpub/wwwroot/appname LOG: Initial PrivatePath = bin Calling assembly : (Unknown). LOG: Policy not being applied to reference at this time (private, custom, partial, or location-based assembly bind). I found this issue on the web and tried all the solutions to it but nothing worked. I then went into all my projects that it references under the solution and cleared out the bin/debug folder in each, I cleared out the obj folder under each and also deleted the temporary files associated with the application. I rebuilt it and it still will not work due to this error Not sure what is causing this or how to fix this issue. I have tried restarting IIS, stopping index services which was said to be a known issue. This is .net framework 1.1 app and visual studio 2003 Any suggestions would be great. Thanks.

  Read the article

• Virtual PC on Windows 7 - Hardware-assisted virtualization is disabled

  - by DLux

  I am running a Lenovo Thinkpad T61 with an Intel Core 2 Duo T7300 processor. When I run Virtual PC in Windows 7, I get the following error: Unable to start Windows Virtual PC because hardware-assisted virtualization is disabled. When running the Hardware-Assisted Virtualization Detection Tool from Microsoft says: Hardware-assited virtualization is not enabled on this computer. Now, in the BIOS, I do have virtualization enabled and according to Intel this processor supports Intel-VT. What am I missing here?

  Read the article

• Microsoft Outlook Addon

  - by malik

  Microsoft Visual Studio 2005 Tools for the 2007 Microsoft Office System can only be installed on a machine with the corresponding Visual Studio localized edition. Please install the matching Visual Studio 2005 localized edition and then run Microsoft Visual Studio 2005 Tools for the 2007 Microsoft Office System setup again.

  Read the article

• Perl for a Python programmer

  - by fortran

  I know Python (and a bunch of other languages) and I think it might be nice to learn Perl, even if it seems that most of the people is doing it the other way around... My main concern is not about the language itself (I think that part is always easy), but about learning the Perlish (as contrasted with Pythonic) way of doing things; because I don't think it'll be worth the effort if I end up programming Python in Perl. So my questions are basically two: Are there many problems/application areas where it's actually more convenient to solve them in Perl rather than in Python? If the first question is positive, where can I found a good place to get started and learn best practices that is not oriented to beginners?

  Read the article

• Sync LINQ-to-SQL DBML schema with SQL Server database

  - by Maxim Z.

  After creating a SQL Server 2008 database, I made a Linq-to-SQL schema in Visual Studio. Next, in the .dbml visual editor (in Visual Studio), I added PK-to-FK and PK-to-PK associations to the schema. How do I copy those associations that I created in Visual Studio over to the database? In other words, how do I sync with the DB?

  Read the article

• EFI vs MBR - Installing Windows Server 2008 R2 or 2012 on 8TB

  - by Riaan de Lange

  I'm having some difficulty installing Windows Server 2008 R2 and Windows Server 2012 on an Intel Server platform. The server specs is as follows: Intel Grizzly Pass Server System - R2308GZ4GC 2x Intel Xeon 2620 - 2.0 GHZ - BX80621E52620 132 GB of Memory REG-DIMM - TS1GKR72V6H 4x Seagate Constellation ES 2TB 3.5" 7200rpm 6GB/S - ST32000645NS Intel Big Laurel 4CH 6G SAS RAID 512MB - RS2BL040 On the Intel RAID Controller Setup, I have setup the HDD to be in RAID-0 - for testing purposes. (Ultimately configured in RAID-5) So, the total size of HDD space I can use is 7.6 TB something... When I install the Server OS's, they don't seem to go beyond 2 TB (1.76 TB) I have read up on EFI and UEFI boot, and this seems to work in 2012, but I could not install any drivers for the motherboard... So, I also tried EFI for 2008R2, and this worked while installing the OS, it did not however work with the Windows Boot Manager option in the BIOS. It kept on freezing once it tries to load the partition. My idea was to allocate the complete 8 TB for the OS, and load a few VM's on there. I have now started with a new approach where I'll have a 256 GB OS Partition, and a secondary 7.5 TB Data partition. Oh, and I also did a diskpart - convert disk to gpt whilst installing 2008R2. The whole disk was accessible, 7.6TB Can anyone please clarify that EFI/UEFI is meant for larger boot volumes? Bigger than 2TB. If I were to have an ideal situation where my OS is run on a SSD, 256GB, and I can attach the 8 TB drives as normal disk to the OS? I'm I correct in saying that if I wanted to boot from a 8TB partition, I would need to force the BIOS to boot from EFI? The limit for MBR is 2 TB as far as I know now... *FYI: The motherboard is EFI-ready

  Read the article

• Broken fonts in Konsole KDE 4.3.4

  - by depesz

  I have a strange situation - after some upgrades a couple of days ago fonts in KDE Konsole broke. To make it more specific - standard fonts look more or less OK, but when I use my national characters (like acelnsózz) they all look broken - like from another font, or badly scaled. The same problem doesn't exist in GNOME Terminal. I usually use the Terminus font, so I used this for demonstration, but it shows in other fonts as well - if that will be necessary I will provide list. Konsole shot: GNOME Terminal shot: As for my settings: =$ cat /etc/X11/xorg.conf Section "Device" Identifier "Builtin Default intel Device 0" Driver "intel" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Screen" Identifier "Builtin Default intel Screen 0" Device "Builtin Default intel Device 0" Monitor "Monitor0" EndSection Section "InputDevice" Identifier "touchpad" Driver "synaptics" Option "CorePointer" EndSection Section "ServerLayout" Identifier "Builtin Default Layout" Screen "Builtin Default intel Screen 0" InputDevice "touchpad" EndSection =$ xdpyinfo | grep -E resolution\|dimensions dimensions: 1680x1050 pixels (444x277 millimeters) resolution: 96x96 dots per inch I tried forcing DPI in system settings (to 120), or adding monitor size to xorg.conf - so far nothing helped. Any idea on what should I do to make it work sanely again?

  Read the article

• How to make Visual Source Safe ignore certain directories?

  - by user11671

  Even when you drop the parent directory into VSS,it should also ignore the specified directories. How to achieve that?

  Read the article

• ubuntu: amd64 vs i386?

  - by ajsie

  cant understand what these are even though i've read articles about them. does it has something to do with 32 bits and 64 bits CPU? so why is it saying "AMD"64 and "I386"? AMD is a label just like INTEL? so if I've got Intel Core 2 Duo (Macbook pro) then i cant use amd64 even though Intel Core is 64 bits. thanks for explanation!

  Read the article

• Broken fonts in konsole kde 4.3.4

  - by depesz

  I have strange situation - after some upgrade couple of days ago fonts in KDE konsole broke. To make it more specific - standard fonts look more or less ok, but when I use my national characters (like acelnsózz) they all look broken - like from another font, or badly scaled. The same problem doesn't exist in gnome-terminal. I usually use Terminus font, so I used this for demonstration, but it shows in other fonts as well - if that will be necessary I will provide list. Konsole shot: gnome-terminal shot: As for my settings: =$ cat /etc/X11/xorg.conf Section "Device" Identifier "Builtin Default intel Device 0" Driver "intel" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Screen" Identifier "Builtin Default intel Screen 0" Device "Builtin Default intel Device 0" Monitor "Monitor0" EndSection Section "InputDevice" Identifier "touchpad" Driver "synaptics" Option "CorePointer" EndSection Section "ServerLayout" Identifier "Builtin Default Layout" Screen "Builtin Default intel Screen 0" InputDevice "touchpad" EndSection =$ xdpyinfo | grep -E resolution\|dimensions dimensions: 1680x1050 pixels (444x277 millimeters) resolution: 96x96 dots per inch I tried forcing DPI in system settings (to 120), or adding monitor size to xorg.conf - so far nothing helped. Any idea on what should I do to make it work sanely again?

  Read the article

• Logitech USB headphones detected and selected in Debian Squeeze but sound still coming from speakers

  - by mattalexx

  I have a pair of Logitech wireless USB headphones that work with Ubuntu Natty but aren't working in Debian Squeeze. When they are selected as the default audio output, the sound comes out of the speakers instead of the headphones. I have rebooted and tried using a different USB port. My computer is a Thinkpad T510. How can I fix this problem? Here is lsusb: Bus 002 Device 005: ID 046d:0a29 Logitech, Inc. Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 005: ID 046d:c52f Logitech, Inc. Wireless Mouse M305 Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Here is cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xf2420000 irq 17 1 [Headset ]: USB-Audio - Logitech Wireless Headset Logitech Logitech Wireless Headset at usb-0000:00:1d.0-1.1, full speed 2 [NVidia ]: HDA-Intel - HDA NVidia HDA NVidia at 0xcdefc000 irq 17 Here is the gnome-volume-control GUI: Here's lsmod | grep usb: snd_usb_audio 50670 0 snd_usb_lib 11192 1 snd_usb_audio usbhid 28008 0 hid 50909 1 usbhid snd_rawmidi 12513 2 snd_usb_lib,snd_seq_midi snd_hwdep 4054 2 snd_usb_audio,snd_hda_codec snd_pcm 47226 3 snd_usb_audio,snd_hda_intel,snd_hda_codec usbcore 98969 5 snd_usb_audio,snd_usb_lib,usbhid,ehci_hcd snd 34423 11 snd_usb_audio,snd_rawmidi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device nls_base 4541 1 usbcore Here's cat /etc/modprobe.d/alsa-base.conf: # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd && { /sbin/modprobe --quiet snd-ioctl32 ; /sbin/modprobe --quiet snd-seq ; } install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi && { /sbin/modprobe --quiet snd-seq-midi ; : ; } install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 && { /sbin/modprobe --quiet snd-emu10k1-synth ; : ; } # Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 # Keep snd-pcsp from beeing loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=-2 EDIT In VLC, I reset VLC prefs (Output: Default) and sound still comes out of speakers as expected. Then I change it to "Output: ALSA Audio output" and a Device menu appears. I select the headphones. When I then save the prefs, the audio switch to the headphones! But here's what's weird: I go back to prefs, change it to "Output: Default" and the headphones keep working. Maybe the ALSA option is actually what is being chosen as the "Default" option, but the Device menu (whose selection is still being used) is still set to the headphones. Anyway, now I need to figure out how to make it work as the default for the whole system.

  Read the article

• P4 vs. i3/i5 *T in power consumption and performance [migrated]

  - by Walter Zomb

  I am running an Intel P4 prescott with HT on my home server (linux file server on encrypted disks on software-RAID5 and virtualisation host for three further machines). The performance for this purpose is really okay. When the system is idle it consumes about 140W power. I am considering buying a new mainboard for an e.g. Intel i3-2100T or an Intel i5-2390T. Both are low power CPUs with a TDP about 40W. Has anyone experiences how much power a recent mainboard with one of these CPUs an 3-4 'green-energy' disks (6W each) consumes? Do I get underneath the 100W threshold? What's about the performance of these low power CPUs? Are they comparable to an Intel P4 with HT? regards, walter

  Read the article

• Minimizing the number of boxes that cover a given set of intervals

  - by fortran

  Hi, this is a question for the algorithms gurus out there :-) Let S be a set of intervals of the natural numbers that might overlap and b a box size. Assume that for each interval, the range is strictly less than b. I want to find the minimum set of intervals of size b (let's call it M) so all the intervals in S are contained in the intervals of M. Trivial example: S = {[1..4], [2..7], [3..5], [8..15], [9..13]} b = 10 M = {[1..10], [8..18]} // so ([1..4], [2..7], [3..5]) are inside [1..10] and ([8..15], [9..13]) are inside [8..18] I think a greedy algorithm might not work always, so if anybody knows of a solution of this problem (or a similar one that can be converted into), that would be great. Thanks!

  Read the article

• Why has anybody ever used COBOL?

  - by sarzl

  I know: You and me hate COBOL. I took a look at a lot of code examples and it didn't take me long to know why everybody tries to avoid it. So I really have no idea: Why was COBOL ever used? I mean: Hey - there was Fortran before it, and Fortran looks like a jesus-language compared to COBOL. This isn't argumentative but historical as I'm young and didn't even know about COBOL before 4 months.

  Read the article

• 64 Bit Windows drivers for Inspiron 1720

  - by Rob Allen

  Dell doesn't seem to offer 64 bit drivers specifically for the Inspiron 1720 (laptop). I'm going to be upgrading from Vista 32-bit to Windows 7 64bit and I want to pull down the necessary stuff before hand. Are there any Dell systems that are similar enough to the Inspiron 1720 that I can use for a baseline to make sure I still have Ethernet and WiFi after the reinstall? It doesn't matter if they are for Vista 64 or Windows 7. Identified hardware: Processor: Intel mobile Core 2 Duo T7500 Chipset: Intel Mobile 965 Express Wifi: Intel Pro Wireless Drive Controller: Intel Matrix Graphics: nVidia GeForce 8600M GT Bluetooth: Dell TrueMobile 355 + EDR Ricoh card reader I think anything else, the default Windows drivers will be sufficient. Let me know if you think I missed something thing please.

  Read the article

• How do you enable multi-core virtualization in Windows 8 Pro?

  - by Greg B

  I've just got a new Dell Vostro 470 with a quad core (8 threads) i7 3770 and I'm trying to run virtual machines on it, which works fine, except if I want to assign multiple cores to a VM. I've checked the bios which states Intel Virtualization Technology [Enabled], but both Hyper-V and VirtualBox will only allow me to assign a single core. If I run the Intel Processor Identification Utility on the host OS it tells me that Intel Virtualization Technology isn't supported by the processor, but according to the Intel website, it is. So whats going on? Have Dell clipped the i7's wings? Is there some config in Windows I need to change?

  Read the article

• RenderTargetBitmap + Resource'd VisualBrush = incomplete image

  - by Will

  I've found a new twist on the "Visual to RenderTargetBitmap" question! I'm rendering previews of WPF stuff for a designer. That means I need to take a WPF visual and render it to a bitmap without that visual ever being displayed. Got a nice little method to do it like to see it here it goes private static BitmapSource CreateBitmapSource(FrameworkElement visual) { Border b = new Border { Width = visual.Width, Height = visual.Height }; b.BorderBrush = Brushes.Black; b.BorderThickness = new Thickness(1); b.Background = Brushes.White; b.Child = visual; b.Measure(new Size(b.Width, b.Height)); b.Arrange(new Rect(b.DesiredSize)); RenderTargetBitmap rtb = new RenderTargetBitmap( (int)b.ActualWidth, (int)b.ActualHeight, 96, 96, PixelFormats.Pbgra32); // intermediate step here to ensure any VisualBrushes are rendered properly DrawingVisual dv = new DrawingVisual(); using (var dc = dv.RenderOpen()) { var vb = new VisualBrush(b); dc.DrawRectangle(vb, null, new Rect(new Point(), b.DesiredSize)); } rtb.Render(dv); return rtb; } Works fine, except for one leeetle thing... if my FrameworkElement has a VisualBrush, that brush doesn't end up in the final rendered bitmap. Something like this: <UserControl.Resources> <VisualBrush x:Key="LOLgo"> <VisualBrush.Visual> <!-- blah blah --> <Grid Background="{StaticResource LOLgo}"> <!-- yadda yadda --> Everything else renders to the bitmap, but that VisualBrush just won't show. The obvious google solutions have been attempted and have failed. Even the ones that specifically mention VisualBrushes missing from RTB'd bitmaps. I have a sneaky suspicion this might be caused by the fact that its a Resource, and that lazy resource isn't being inlined. So a possible fix would be to, somehow(???), force resolution of all static resource references before rendering. But I have absolutely no idea how to do that. Anybody have a fix for this?

  Read the article

< Previous Page | 353 354 355 356 357 358 359 360 361 362 363 364  | Next Page >