Search Results

Search found 22456 results on 899 pages for 'computer behavior'.

Page 358/899 | < Previous Page | 354 355 356 357 358 359 360 361 362 363 364 365  | Next Page >

  • Setting up a VPN connection to Amazon VPC - routing

    - by Keeno
    I am having some real issues setting up a VPN between out office and AWS VPC. The "tunnels" appear to be up, however I don't know if they are configured correctly. The device I am using is a Netgear VPN Firewall - FVS336GV2 If you see in the attached config downloaded from VPC (#3 Tunnel Interface Configuration), it gives me some "inside" addresses for the tunnel. When setting up the IPsec tunnels do I use the inside tunnel IP's (e.g. 169.254.254.2/30) or do I use my internal network subnet (10.1.1.0/24) I have tried both, when I tried the local network (10.1.1.x) the tracert stops at the router. When I tried with the "inside" ips, the tracert to the amazon VPC (10.0.0.x) goes out over the internet. this all leads me to the next question, for this router, how do I set up stage #4, the static next hop? What are these seemingly random "inside" addresses and where did amazon generate them from? 169.254.254.x seems odd? With a device like this, is the VPN behind the firewall? I have tweaked any IP addresses below so that they are not "real". I am fully aware, this is probably badly worded. Please if there is any further info/screenshots that will help, let me know. Amazon Web Services Virtual Private Cloud IPSec Tunnel #1 ================================================================================ #1: Internet Key Exchange Configuration Configure the IKE SA as follows - Authentication Method : Pre-Shared Key - Pre-Shared Key : --- - Authentication Algorithm : sha1 - Encryption Algorithm : aes-128-cbc - Lifetime : 28800 seconds - Phase 1 Negotiation Mode : main - Perfect Forward Secrecy : Diffie-Hellman Group 2 #2: IPSec Configuration Configure the IPSec SA as follows: - Protocol : esp - Authentication Algorithm : hmac-sha1-96 - Encryption Algorithm : aes-128-cbc - Lifetime : 3600 seconds - Mode : tunnel - Perfect Forward Secrecy : Diffie-Hellman Group 2 IPSec Dead Peer Detection (DPD) will be enabled on the AWS Endpoint. We recommend configuring DPD on your endpoint as follows: - DPD Interval : 10 - DPD Retries : 3 IPSec ESP (Encapsulating Security Payload) inserts additional headers to transmit packets. These headers require additional space, which reduces the amount of space available to transmit application data. To limit the impact of this behavior, we recommend the following configuration on your Customer Gateway: - TCP MSS Adjustment : 1387 bytes - Clear Don't Fragment Bit : enabled - Fragmentation : Before encryption #3: Tunnel Interface Configuration Your Customer Gateway must be configured with a tunnel interface that is associated with the IPSec tunnel. All traffic transmitted to the tunnel interface is encrypted and transmitted to the Virtual Private Gateway. The Customer Gateway and Virtual Private Gateway each have two addresses that relate to this IPSec tunnel. Each contains an outside address, upon which encrypted traffic is exchanged. Each also contain an inside address associated with the tunnel interface. The Customer Gateway outside IP address was provided when the Customer Gateway was created. Changing the IP address requires the creation of a new Customer Gateway. The Customer Gateway inside IP address should be configured on your tunnel interface. Outside IP Addresses: - Customer Gateway : 217.33.22.33 - Virtual Private Gateway : 87.222.33.42 Inside IP Addresses - Customer Gateway : 169.254.254.2/30 - Virtual Private Gateway : 169.254.254.1/30 Configure your tunnel to fragment at the optimal size: - Tunnel interface MTU : 1436 bytes #4: Static Routing Configuration: To route traffic between your internal network and your VPC, you will need a static route added to your router. Static Route Configuration Options: - Next hop : 169.254.254.1 You should add static routes towards your internal network on the VGW. The VGW will then send traffic towards your internal network over the tunnels. IPSec Tunnel #2 ================================================================================ #1: Internet Key Exchange Configuration Configure the IKE SA as follows - Authentication Method : Pre-Shared Key - Pre-Shared Key : --- - Authentication Algorithm : sha1 - Encryption Algorithm : aes-128-cbc - Lifetime : 28800 seconds - Phase 1 Negotiation Mode : main - Perfect Forward Secrecy : Diffie-Hellman Group 2 #2: IPSec Configuration Configure the IPSec SA as follows: - Protocol : esp - Authentication Algorithm : hmac-sha1-96 - Encryption Algorithm : aes-128-cbc - Lifetime : 3600 seconds - Mode : tunnel - Perfect Forward Secrecy : Diffie-Hellman Group 2 IPSec Dead Peer Detection (DPD) will be enabled on the AWS Endpoint. We recommend configuring DPD on your endpoint as follows: - DPD Interval : 10 - DPD Retries : 3 IPSec ESP (Encapsulating Security Payload) inserts additional headers to transmit packets. These headers require additional space, which reduces the amount of space available to transmit application data. To limit the impact of this behavior, we recommend the following configuration on your Customer Gateway: - TCP MSS Adjustment : 1387 bytes - Clear Don't Fragment Bit : enabled - Fragmentation : Before encryption #3: Tunnel Interface Configuration Outside IP Addresses: - Customer Gateway : 217.33.22.33 - Virtual Private Gateway : 87.222.33.46 Inside IP Addresses - Customer Gateway : 169.254.254.6/30 - Virtual Private Gateway : 169.254.254.5/30 Configure your tunnel to fragment at the optimal size: - Tunnel interface MTU : 1436 bytes #4: Static Routing Configuration: Static Route Configuration Options: - Next hop : 169.254.254.5 You should add static routes towards your internal network on the VGW. The VGW will then send traffic towards your internal network over the tunnels. EDIT #1 After writing this post, I continued to fiddle and something started to work, just not very reliably. The local IPs to use when setting up the tunnels where indeed my network subnets. Which further confuses me over what these "inside" IP addresses are for. The problem is, results are not consistent what so ever. I can "sometimes" ping, I can "sometimes" RDP using the VPN. Sometimes, Tunnel 1 or Tunnel 2 can be up or down. When I came back into work today, Tunnel 1 was down, so I deleted it and re-created it from scratch. Now I cant ping anything, but Amazon AND the router are telling me tunnel 1/2 are fine. I guess the router/vpn hardware I have just isnt up to the job..... EDIT #2 Now Tunnel 1 is up, Tunnel 2 is down (I didn't change any settings) and I can ping/rdp again. EDIT #3 Screenshot of route table that the router has built up. Current state (tunnel 1 still up and going string, 2 is still down and wont re-connect)

    Read the article

  • Using the Rijndael Object in VB.NET

    - by broke
    I'm trying out the Rijndael to generate an encrypted license string to use for our new software, so we know that our customers are using the same amount of apps that they paid for. I'm doing two things: Getting the users computer name. Adding a random number between 100 and 1000000000 I then combine the two, and use that as the license number(This probably will change in the final version, but I'm just doing something simple for demonstration purposes). Here is some sample codez: Private Sub Main_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load Dim generator As New Random Dim randomValue As Integer randomValue = generator.Next(100, 1000000000) ' Create a new Rijndael object to generate a key ' and initialization vector (IV). Dim RijndaelAlg As Rijndael = Rijndael.Create ' Create a string to encrypt. Dim sData As String = My.Computer.Name.ToString + randomValue.ToString Dim FileName As String = "C:\key.txt" ' Encrypt text to a file using the file name, key, and IV. EncryptTextToFile(sData, FileName, RijndaelAlg.Key, RijndaelAlg.IV) ' Decrypt the text from a file using the file name, key, and IV. Dim Final As String = DecryptTextFromFile(FileName, RijndaelAlg.Key, RijndaelAlg.IV) txtDecrypted.Text = Final End Sub That's my load event, but here is where the magic happens: Sub EncryptTextToFile(ByVal Data As String, ByVal FileName As String, ByVal Key() As Byte, ByVal IV() As Byte) Dim fStream As FileStream = File.Open(FileName, FileMode.OpenOrCreate) Dim RijndaelAlg As Rijndael = Rijndael.Create Dim cStream As New CryptoStream(fStream, _ RijndaelAlg.CreateEncryptor(Key, IV), _ CryptoStreamMode.Write) Dim sWriter As New StreamWriter(cStream) sWriter.WriteLine(Data) sWriter.Close() cStream.Close() fStream.Close() End Sub There is a couple things I don't understand. What if someone reads the text file and recognizes that it is Rijndael, and writes a VB or C# app that decrypts it? I don't really understand all of this code, so if you guys can help me out I will love you all forever. Thanks in advance

    Read the article

  • Visual Studio 2010 Web Deployment

    - by Cranialsurge
    I am trying to use VS2010's 1-Click Publish feature to deploy a test site from my laptop to my server. I have the firewall turned off on both machines and the MS Deployment Service is up and running on both my laptop and the server. However when I try and publish from VS2010 on my laptop I get the following error Error 1 Web deployment task failed.(Remote agent (URL https://192.168.1.181/:8172/msdeploy.axd?site=LocationsTest) could not be contacted. Make sure the remote agent service is installed and started on the target computer.) The requested resource does not exist, or the requested URL is incorrect. Error details: Remote agent (URL https://192.168.1.181/:8172/msdeploy.axd?site=LocationsTest) could not be contacted. Make sure the remote agent service is installed and started on the target computer. An unsupported response was received. The response header 'MSDeploy.Response' was '' but 'v1' was expected. The remote server returned an error: (404) Not Found. 0 0 Test.Web Any idea what I am doing wrong here ?

    Read the article

  • Virus that tries to brute force attack Active Directory users (in alphabetical order)?

    - by Nate Pinchot
    Users started complaining about slow network speed so I fired up Wireshark. Did some checking and found many PCs sending packets similar to the following: (screenshot) http://imgur.com/45VlI.png I blurred out the text for the username, computer name and domain name (since it matches the internet domain name). Computers are spamming the Active Directory servers trying to brute force hack passwords. It will start with Administrator and go down the list of users in alphabetical order. Physically going to the PC finds no one anywhere near it and this behavior is spread across the network so it appears to be a virus of some sort. Scanning computers which have been caught spamming the server with Malwarebytes, Super Antispyware and BitDefender (this is the antivirus the client has) yields no results. This is an enterprise network with about 2500 PCs so doing a rebuild is not a favorable option. My next step is to contact BitDefender to see what help they can provide. Has anybody seen anything like this or have any ideas what it could possibly be?

    Read the article

  • WCF contract mismatch problem

    - by Tom
    Hi there, I have a client console app talking to a WCF service and I get the following error: "The server did not provide a meaningful reply; this might be caused by a contract mismatch, a premature session shutdown or an internal server error." I think it's becuase of a contract mismatch but i can't figure out why. The service runs just fine by itself and the 2 parts were working together until i added the impersonation code. Can anyone see what is wrong? Here is the client, all done in code: NetTcpBinding binding = new NetTcpBinding(); binding.Security.Mode = SecurityMode.Message; binding.Security.Message.ClientCredentialType = MessageCredentialType.Windows; EndpointAddress endPoint = new EndpointAddress(new Uri("net.tcp://serverName:9990/TestService1")); ChannelFactory<IService1> channel = new ChannelFactory<IService1>(binding, endPoint); channel.Credentials.Windows.AllowedImpersonationLevel = TokenImpersonationLevel.Impersonation; IService1 service = channel.CreateChannel(); And here is the config file of the WCF service: <configuration> <system.serviceModel> <bindings> <netTcpBinding> <binding name="MyBinding"> <security mode="Message"> <transport clientCredentialType="Windows"/> <message clientCredentialType="Windows" /> </security> </binding> </netTcpBinding> </bindings> <behaviors> <serviceBehaviors> <behavior name="WCFTest.ConsoleHost2.Service1Behavior"> <serviceMetadata httpGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="true" /> <serviceAuthorization impersonateCallerForAllOperations="true" /> </behavior> </serviceBehaviors> </behaviors> <services> <service behaviorConfiguration="WCFTest.ConsoleHost2.Service1Behavior" name="WCFTest.ConsoleHost2.Service1"> <endpoint address="" binding="wsHttpBinding" contract="WCFTest.ConsoleHost2.IService1"> <identity> <dns value="" /> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" /> <endpoint binding="netTcpBinding" bindingConfiguration="MyBinding" contract="WCFTest.ConsoleHost2.IService1" /> <host> <baseAddresses> <add baseAddress="http://serverName:9999/TestService1/" /> <add baseAddress="net.tcp://serverName:9990/TestService1/" /> </baseAddresses> </host> </service> </services> </system.serviceModel> </configuration>

    Read the article

  • WCF Error: the client and service bindings may be mismatched?

    - by Rev
    Hi let see server config and client config. Then help me find difference between these configs!! Client config <system.serviceModel> <client> <endpoint address="http://localhost/admin2/AdminCentralService.svc" binding="wsHttpBinding" bindingConfiguration="WSHttpBinding_Config" contract="TIR.ThreeTier.ICommandInvoker" name="AdminCentralServiceConfig" /> <endpoint binding="wsHttpBinding" bindingConfiguration="WSHttpBinding_Config" contract="TIR.ThreeTier.ICommandInvoker" name="CommandInvokerConfig" /> </client> <bindings> <wsHttpBinding> <binding name="WSHttpBinding_Config" closeTimeout="00:10:00" openTimeout="00:10:00" receiveTimeout="00:10:00" sendTimeout="00:10:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="2147483647" maxReceivedMessageSize="2147483647" messageEncoding="Mtom" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false"> <readerQuotas maxDepth="2147483647" maxStringContentLength="2147483647" maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" /> <security mode="Message"> <transport clientCredentialType="Windows" proxyCredentialType="None" realm="" /> <message clientCredentialType="Windows" negotiateServiceCredential="true" algorithmSuite="Default" establishSecurityContext="true" /> </security> </binding> </wsHttpBinding> </bindings> Server Config <system.serviceModel> <behaviors> <serviceBehaviors> <behavior name="AdminCentral.Business.Web.Service1Behavior"> <serviceMetadata httpGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="false" /> </behavior> </serviceBehaviors> </behaviors> <bindings> <wsHttpBinding> <binding name="WSHttpBinding_Config" closeTimeout="00:10:00" openTimeout="00:10:00" receiveTimeout="00:10:00" sendTimeout="00:10:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="2147483647" maxReceivedMessageSize="2147483647" messageEncoding="Mtom" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false"> <readerQuotas maxDepth="2147483647" maxStringContentLength="2147483647" maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647"/> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false"/> <security mode="Message"> <transport clientCredentialType="Windows" proxyCredentialType="None" realm=""/> <message clientCredentialType="Windows" negotiateServiceCredential="true" algorithmSuite="Default" establishSecurityContext="true"/> </security> </binding> </wsHttpBinding> </bindings> <services> <service behaviorConfiguration="AdminCentral.Business.Web.Service1Behavior" name="AdminCentral.Business.Web.AdminCentralService"> <endpoint address="" binding="wsHttpBinding" contract="AdminCentral.Business.Web.ICommandInvoker"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" /> </service> </services>

    Read the article

  • HTTP Bad Request error when requesting a WCF service contract

    - by Enrico Campidoglio
    I have a WCF service with the following configuration: <system.serviceModel> <behaviors> <serviceBehaviors> <behavior name="MetadataEnabled"> <serviceDebug includeExceptionDetailInFaults="true" /> <serviceMetadata httpGetEnabled="true" /> </behavior> </serviceBehaviors> </behaviors> <services> <service behaviorConfiguration="MetadataEnabled" name="MyNamespace.MyService"> <endpoint name="BasicHttp" address="" binding="basicHttpBinding" contract="MyNamespace.IMyServiceContract" /> <endpoint name="MetadataHttp" address="contract" binding="mexHttpBinding" contract="IMetadataExchange" /> <host> <baseAddresses> <add baseAddress="http://localhost/myservice" /> </baseAddresses> </host> </service> </services> </system.serviceModel> When hosting the service in the WcfSvcHost.exe process, if I browse to the URL: http://localhost/myservice/contract where the service metadata is available I get an HTTP 400 Bad Request error. By inspecting the WCF logs I found out that an System.Xml.XmlException exception is being thrown with the message: "The body of the message cannot be read because it is empty."Here is an extract of the log file: <Exception> <ExceptionType> System.ServiceModel.ProtocolException, System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 </ExceptionType> <Message>There is a problem with the XML that was received from the network. See inner exception for more details.</Message> <StackTrace> at System.ServiceModel.Channels.HttpRequestContext.CreateMessage() at System.ServiceModel.Channels.HttpChannelListener.HttpContextReceived(HttpRequestContext context, ItemDequeuedCallback callback) at System.ServiceModel.Channels.SharedHttpTransportManager.OnGetContextCore(IAsyncResult result) at System.ServiceModel.Channels.SharedHttpTransportManager.OnGetContext(IAsyncResult result) at System.ServiceModel.Diagnostics.Utility.AsyncThunk.UnhandledExceptionFrame(IAsyncResult result) at System.Net.LazyAsyncResult.Complete(IntPtr userToken) at System.Net.LazyAsyncResult.ProtectedInvokeCallback(Object result, IntPtr userToken) at System.Net.ListenerAsyncResult.WaitCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* nativeOverlapped) at System.Threading._IOCompletionCallback.PerformIOCompletionCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* pOVERLAP) </StackTrace> <InnerException> <ExceptionType>System.Xml.XmlException, System.Xml, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</ExceptionType> <Message>The body of the message cannot be read because it is empty.</Message> <StackTrace> at System.ServiceModel.Channels.HttpRequestContext.CreateMessage() at System.ServiceModel.Channels.HttpChannelListener.HttpContextReceived(HttpRequestContext context, ItemDequeuedCallback callback) at System.ServiceModel.Channels.SharedHttpTransportManager.OnGetContextCore(IAsyncResult result) at System.ServiceModel.Channels.SharedHttpTransportManager.OnGetContext(IAsyncResult result) at System.ServiceModel.Diagnostics.Utility.AsyncThunk.UnhandledExceptionFrame(IAsyncResult result) at System.Net.LazyAsyncResult.Complete(IntPtr userToken) at System.Net.LazyAsyncResult.ProtectedInvokeCallback(Object result, IntPtr userToken) at System.Net.ListenerAsyncResult.WaitCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* nativeOverlapped) at System.Threading._IOCompletionCallback.PerformIOCompletionCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* pOVERLAP) </StackTrace> </InnerException> </Exception> If I instead browse to the URL: http://localhost/myservice?wsdl everything works just fine and I get the WSDL contract. At this point, I can also remove the "MetadataHttp" metadata endpoint completely, and it wouldn't make any difference. I'm using .NET 3.5 SP1. Does anyone have an idea of what could be wrong here?

    Read the article

  • How can I generate a client proxy for a WCF service with an HTTPS endpoint?

    - by ng5000
    Might be the same issue as this previuos question: WCF Proxy but not sure... I have an HTTPS service connfigured to use transport security and, I hope, Windows credentials. The service is only accessed internally (i.e. within the intranet). The configuration is as follows: <configuration> <system.serviceModel> <services> <service name="WCFTest.CalculatorService" behaviorConfiguration="WCFTest.CalculatorBehavior"> <host> <baseAddresses> <add baseAddress = "https://localhost:8000/WCFTest/CalculatorService/" /> </baseAddresses> </host> <endpoint address ="basicHttpEP" binding="basicHttpBinding" contract="WCFTest.ICalculatorService" bindingConfiguration="basicHttpBindingConfig"/> <endpoint address="mex" binding="mexHttpsBinding" contract="IMetadataExchange"/> </service> </services> <bindings> <basicHttpBinding> <binding name="basicHttpBindingConfig"> <security mode="Transport"> <transport clientCredentialType = "Windows"/> </security> </binding> </basicHttpBinding> </bindings> <behaviors> <serviceBehaviors> <behavior name="WCFTest.CalculatorBehavior"> <serviceAuthorization impersonateCallerForAllOperations="false" principalPermissionMode="UseWindowsGroups" /> <serviceCredentials > <windowsAuthentication allowAnonymousLogons="false" includeWindowsGroups="true" /> </serviceCredentials> <serviceMetadata httpsGetEnabled="True"/> <serviceDebug includeExceptionDetailInFaults="False" /> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> </configuration> When I run the service I can't see the service in IE. I get a "this page can not be displayed" error. If I try and create a client in VS2008 via the "add service reference" wizard I get this error: There was an error downloading 'https://localhost:8000/WCFTest/CalculatorService/'. There was an error downloading 'https://localhost:8000/WCFTest/CalculatorService/'. The underlying connection was closed: An unexpected error occurred on a send. Authentication failed because the remote party has closed the transport stream. Metadata contains a reference that cannot be resolved: 'https://localhost:8000/WCFTest/CalculatorService/'. An error occurred while making the HTTP request to https://localhost:8000/WCFTest/CalculatorService/. This could be due to the fact that the server certificate is not configured properly with HTTP.SYS in the HTTPS case. This could also be caused by a mismatch of the security binding between the client and the server. The underlying connection was closed: An unexpected error occurred on a send. Authentication failed because the remote party has closed the transport stream. If the service is defined in the current solution, try building the solution and adding the service reference again. I think I'm missing some fundamental basics here. Do I need to set up some certificates? Or should it all just work as it seems to do when I use NetTcpBinding? Thanks

    Read the article

  • How do you pass user credentials from WebClient to a WCF REST service?

    - by Alex
    I am trying to expose a WCT REST service and only users with valid username and password would be able to access it. The username and password are stored in a SQL database. Here is the service contract: public interface IDataService { [OperationContract] [WebGet(ResponseFormat = WebMessageFormat.Json)] byte[] GetData(double startTime, double endTime); } Here is the WCF configuration: <bindings> <webHttpBinding> <binding name="SecureBinding"> <security mode="Transport"> <transport clientCredentialType="Basic"/> </security> </binding> </webHttpBinding> </bindings> <behaviors> <serviceBehaviors> <behavior name="DataServiceBehavior"> <serviceMetadata httpGetEnabled="true"/> <serviceCredentials> <userNameAuthentication userNamePasswordValidationMode="Custom" customUserNamePasswordValidatorType= "CustomValidator, WCFHost" /> </serviceCredentials> </behavior> </serviceBehaviors> </behaviors> <services> <service behaviorConfiguration="DataServiceBehavior" name="DataService"> <endpoint address="" binding="webHttpBinding" bindingConfiguration="SecureBinding" contract="IDataService" /> </service> </services> I am accessing the service via the WebClient class within a Silverlight application. However, I have not been able to figure out how to pass the user credentials to the service. I tried various values for client.Credentials but none of them seems to trigger the code in my custom validator. I am getting the following error: The underlying connection was closed: An unexpected error occurred on a send. Here is some sample code I have tried: WebClient client = new WebClient(); client.Credentials = new NetworkCredential("name", "password", "domain"); client.OpenReadCompleted += new OpenReadCompletedEventHandler(GetData); client.OpenReadAsync(new Uri(uriString)); If I set the security mode to None, the whole thing works. I also tried other clientCredentialType values and none of them worked. I also self-hosted the WCF service to eliminate the issues related to IIS trying to authenticate a user before the service gets a chance. Any comment on what the underlying issues may be would be much appreciated. Thanks. Update: Thanks to Mehmet's excellent suggestions. Here is the tracing configuration I had: <system.diagnostics> <sources> <source name="System.ServiceModel" switchValue="Information, ActivityTracing" propagateActivity="true"> <listeners> <add name="xml" /> </listeners> </source> <source name="System.IdentityModel" switchValue="Information, ActivityTracing" propagateActivity="true"> <listeners> <add name="xml" /> </listeners> </source> </sources> <sharedListeners> <add name="xml" type="System.Diagnostics.XmlWriterTraceListener" initializeData="c:\Traces.svclog" /> </sharedListeners> </system.diagnostics> But I did not see any message coming from my Silverlight client. As for https vs http, I used https as follows: string baseAddress = "https://localhost:6600/"; _webServiceHost = new WebServiceHost(typeof(DataServices), new Uri(baseAddress)); _webServiceHost.Open(); However, I did not configure any SSL certificate. Is this the problem?

    Read the article

  • Zoom on multiple areas in d3.js

    - by t2k32316
    I'm planning to have a geoJSON map inside my svg alongside other svg elements. I would like to be able to zoom (zoom+pan) in the map and keep the map in the same location with a bounding box. I can accomplish this by using a clipPath to keep the map within a rectangular area. The problem is that I also want to enable zooming and panning on my entire svg. If I do d3.select("svg").call(myzoom); this overrides any zoom I applied to my map. How can I apply zoom to both my entire svg and to my map? That is, I want to be able to zoom+pan on my map when my mouse is in the map's bounding box, and when the mouse is outside the bounding box, zoom+pan on the entire svg. Here's example code: http://bl.ocks.org/nuernber/aeaac0e8edcf7ca93ade. (how do I get around the cross domain issue to load the map?) <svg id="svg" width="640" height="480" xmlns="http://www.w3.org/2000/svg" version="1.1"> <defs> <clipPath id="rectClip"> <rect x="150" y="25" width="400" height="400" style="stroke: gray; fill: none;"/> </clipPath> </defs> <g id="outer_group"> <circle cx="100" cy="50" r="40" stroke="black" stroke-width="2" fill="red" /> <g id="svg_map" style="clip-path: url(#rectClip);"> </g> </g> </svg><br/> <script type="text/javascript"> var svg = d3.select("#svg_map"); var mapGroup = svg.append("g"); var projection = d3.geo.mercator(); var path = d3.geo.path().projection(projection); var zoom = d3.behavior.zoom() .translate(projection.translate()) .scale(projection.scale()) .on("zoom", zoomed); mapGroup.call(zoom); var pan = d3.behavior.zoom() .on("zoom", panned); d3.select("svg").call(pan); mapGroup.attr("transform", "translate(200,0) scale(2,2)"); d3.json("ne_110m_admin_0_countries/ne_110m_admin_0_countries.geojson", function(collection) { mapGroup.selectAll("path").data(collection.features) .enter().append("path") .attr("d", path) .attr("id", function(d) { return d.properties.name.replace(/\s+/g, "")}) .style("fill", "gray").style("stroke", "white").style("stroke-width",1); } ); function panned() { var x = d3.event.translate[0]; var y = d3.event.translate[1]; d3.select("#outer_group").attr("transform", "translate("+x+","+y+") scale(" + d3.event.scale + ")"); } function zoomed() { previousScale = d3.event.scale; projection.translate(d3.event.translate).scale(d3.event.scale); translationOffset = d3.event.translate; mapGroup.selectAll("path").attr("d", path); } </script>

    Read the article

  • Best ways to teach a beginner to program?

    - by Justin Standard
    Original Question I am currently engaged in teaching my brother to program. He is a total beginner, but very smart. (And he actually wants to learn). I've noticed that some of our sessions have gotten bogged down in minor details, and I don't feel I've been very organized. (But the answers to this post have helped a lot.) What can I do better to teach him effectively? Is there a logical order that I can use to run through concept by concept? Are there complexities I should avoid till later? The language we are working with is Python, but advice in any language is welcome. How to Help If you have good ones please add the following in your answer: Beginner Exercises and Project Ideas Resources for teaching beginners Screencasts / blog posts / free e-books Print books that are good for beginners Please describe the resource with a link to it so I can take a look. I want everyone to know that I have definitely been using some of these ideas. Your submissions will be aggregated in this post. Online Resources for teaching beginners: A Gentle Introduction to Programming Using Python How to Think Like a Computer Scientist Alice: a 3d program for beginners Scratch (A system to develop programming skills) How To Design Programs Structure and Interpretation of Computer Programs Learn To Program Robert Read's How To Be a Programmer Microsoft XNA Spawning the Next Generation of Hackers COMP1917 Higher Computing lectures by Richard Buckland (requires iTunes) Dive into Python Python Wikibook Project Euler - sample problems (mostly mathematical) pygame - an easy python library for creating games Create Your Own Games With Python ebook Foundations of Programming for a next step beyond basics. Squeak by Example Recommended Print Books for teaching beginners Accelerated C++ Python Programming for the Absolute Beginner Code by Charles Petzold

    Read the article

  • Cannot run setups from a vboxsvr mapped network drive on Windows within VirtualBox

    - by Dimitri C.
    I'm trying to run an application setup by double-clicking the setup.exe from within Windows Explorer. The file is located on a mapped network drive, and I'm using Windows 7. This results in the following error message: The specified path does not exist. Check the path, and then try again. The workaround I found is to copy the installer to the main hard drive (c:) and run it from there; however, this is rather inconvenient. I have the impression that the problem only occurs with installers, as everything seemed to work fine with regular exe's. Is there anyone who can explain this odd behavior? Update: After some extended tests I noticed that the problem only occurs with a mapped drive of VirtualBox's "shared folders" (cf. vboxsvr; VirtualBox v3.1.4). Mapping an SMB drive works fine. Update: The same problem occurs on Windows Vista.

    Read the article

  • Server 2003 on domain wont let domain user have local profile

    - by RobW
    I have a few servers that are acting in this behavior, you log in and always get put into a temporary profile. The server is licensed for TS. The user I am testing with has local admin rights so it doesn't seem to be a permission issue on the server. I'll first get a message that the users roaming profile cannot be found, even though we dont use roaming profiles. I then get another message immediately after saying a local profile could not be loaded, so it will only use a temp profile. Any help would be greatly appreciated.

    Read the article

  • GET /wpad.dat entries flooding my access_log

    - by Aas
    I have a small LAN of some 30 users in it with proxy auto configuration enabled and working. Two of them are requesting wpad.dat file too rapidly at a pace of 30 times per second. 10.1.14.246 - - [02/Jun/2014:09:07:18 +0200] "GET /wpad.dat HTTP/1.1" 302 302 10.1.14.141 - - [02/Jun/2014:09:07:18 +0200] "GET /wpad.dat HTTP/1.1" 302 302 I don't know whether this is a problem from performance perspective, (the server is powerful enough to handle this) but the problem is it clogs up the access_log file. It grows about 1GB per week. Clients run Win7Pro. What could cause this behavior? What can be done to stop it? I have shortened log rotate window as a temporary workaround to prevent /var fill up. Thanks beforehand for your support.

    Read the article

  • Is there a perfect algorithm for chess?

    - by Overflown
    Dear Stack Overflow community, I was recently in a discussion with a non-coder person on the possibilities of chess computers. I'm not well versed in theory, but think I know enough. I argued that there could not exist a deterministic Turing machine that always won or stalemated at chess. I think that, even if you search the entire space of all combinations of player1/2 moves, the single move that the computer decides upon at each step is based on a heuristic. Being based on a heuristic, it does not necessarily beat ALL of the moves that the opponent could do. My friend thought, to the contrary, that a computer would always win or tie if it never made a "mistake" move (however do you define that?). However, being a programmer who has taken CS, I know that even your good choices - given a wise opponent - can force you to make "mistake" moves in the end. Even if you know everything, your next move is greedy in matching a heuristic. Most chess computers try to match a possible end game to the game in progress, which is essentially a dynamic programming traceback. Again, the endgame in question is avoidable though. -- thanks, Allan Edit: Hmm... looks like I ruffled some feathers here. That's good. Thinking about it again, it seems like there is no theoretical problem with solving a finite game like chess. I would argue that chess is a bit more complicated than checkers in that a win is not necessarily by numerical exhaustion of pieces, but by a mate. My original assertion is probably wrong, but then again I think I've pointed out something that is not yet satisfactorily proven (formally). I guess my thought experiment was that whenever a branch in the tree is taken, then the algorithm (or memorized paths) must find a path to a mate (without getting mated) for any possible branch on the opponent moves. After the discussion, I will buy that given more memory than we can possibly dream of, all these paths could be found.

    Read the article

  • Why don't I have write permission to my vmware virtual network device?

    - by Robert Martin
    I want to allow my VMWare machine to force the virtual network it's on into promiscuous mode so I can play around with honeyd. I received an error message that told me to go to http://vmware.com/info?id=161 to allow this behavior. Based on their advice, I did: $ groupadd promiscuous $ cat /etc/group | grep promiscuous promiscuous:x:1002:robert $ usermod -a -G promiscuous robert $ id robert uid=1000(robert) gid=1000(robert) groups=1000(robert),....,1002(promiscuous) $ chgrp newgroup /dev/vmnet8 $ chmod g+rw /dev/vmnet8 $ ls -l /dev/vmnet8 crw-rw---- 1 root promiscuous 119, 8 2012-03-29 10:29 /dev/vmnet8 Looks like I gave RW permission to the promiscuous group, and added myself. Except that VMWare still gives me an error message that says I cannot enter promiscuous mode. To try out the group thing, I tried: $ echo "1" >/dev/vmnet8 bash: /dev/vmnet8: Permission denied That really surprised me: It makes me think that I still haven't properly given myself the correct permissions... What am I missing?

    Read the article

  • mysql jdbc got ArrayIndexOutOfBoundsException when database name length = 9

    - by Thang Hoang
    this code below will throw : Exception in thread "main" java.sql.SQLException: Unable to connect to any hosts due to exception: java.lang.ArrayIndexOutOfBoundsException: 40 mysql 5.1, jdbc driver 5.1.21 if I change connection string to any database have name's lengh != 9, it will pass to print 'connected'. or I create other database as '123456789' it throw same exception. I connect to other database on amazon s3, that have same name length, it throw java.lang.ArrayIndexOutOfBoundsException: 43. this database version is 'mysql Ver 14.14 Distrib 5.5.28, for debian-linux-gnu (i686) using readline 6.2 ' any idea of this weird mysql behavior, thanks public class MysqlConnection { public static void main(String[] args) throws Exception { Connection conn = null; String userName = "root"; String password = "123456"; String url = "jdbc:mysql://localhost:3306/test12345"; Class.forName ("com.mysql.jdbc.Driver").newInstance (); conn = DriverManager.getConnection (url,userName, password); System.out.println ("Connected"); } }

    Read the article

  • Recover lost NTFS partition on SSD

    - by Emil
    Hello, About 2 month ago I upgraded my Dell Latitude E6500 laptop with a Corsair Force F120 SSD drive. Everything worked well until about a week or so back. I started the computer and was faced with a beep and a message saying "No boot sector on Internal HDD (IRRT). No bootable devices". Since I figured that the boot sector had somehow got corrupt I tried booting from the Windows 7 dvd in order to repair the boot sector. But the Windows 7 installation program only found a blank drive with 111GB of unallocated space. I panicked and brought the drive with me to work to let a colleague have a look at it. We made a disk image of the entire drive and ran the drive through Testdisk in Linux. Testdisk did not find any partitions. It appears that the drive has been completely erased... What has happened? What is causing this behavior on an SSD?

    Read the article

  • VirtualBox guest network lost after host disconnects

    - by webjunk
    I am running VirtualBox both on a Snow Leopard OSX host machine and on a Windows Vista host machine. Whenever my host machines lose internet connection the guest machines seem to lose internet connectivity permanently even after the host connection to the Internet is reestablished. Resetting guest networking on the guest os, disconnecting cable via host virtualbox settings, and even restarting the guest OS do not help at all. The guest no longer can access the Internet. The only solution is restarting VirtualBox itself while the host is connected to the Internet. This really gets to be a pain when the host goes into sleep mode or I disconnect my laptop at work and then reconnect at home. Guests are setup with NAT networking. It affects guest machines with both Ubuntu and Windows XP OS'es. Is this expected behavior? Does anyone know of a fix? Or am I setup incorrectly?

    Read the article

  • Certificate Authority issuing Basic EFS certificates without Autoenroll

    - by James Jones
    We have observed some puzzling behavior from the CAs we have set up in both the past and present. For some reason unknown to us, it seems that our CAs are randomly issuing "Basic EFS" certificates to our users. This is evident through the "Issued Certificates" log on the CA. I personally set up a CA yesterday, and the instant that I installed certificate services it started dishing out Basic EFS certs to our users. They seem to be issued at random times: 1:51am, 2:20am, then 7:54am, then 8:03am... etc I looked at the certificate template for Basic EFS and there isn't even an option for Autoenrollment, so I'm seriously in a state of "WTF?!"... Can anyone clue me in as to why my CA has a mind of its own? Do CAs tend to become self-aware and lash out at their owners? Please help...

    Read the article

  • Is there a good XP like windows explorer for windows Vista?

    - by Brett Ryan
    I'm still refusing to go to Windows Vista and now Windows 7 mainly due to the windows explorer, I find it cumbersome and hard to use exclusively with a keyboard. I use XP file explorer in the most basic view, the address bar at the top and files always in list view underneath. The reason I do this is because I'm almost blind and do everything from the keyboard and don't touch the mouse whilst navigating through files, this is because I can type "L[ENTER]D[Enter]B[Enter]" and know that I'm in "c:\documents and settings\Brett Ryan", and I can hit [Tab] once to go to the address bar to type in a folder. Can anyone suggest a replacement for windows explorer that brings back this basic navigational behavior?

    Read the article

  • Ruby on rails generates tests for you. Do those give a false sense of a safety net?

    - by Hamish Grubijan
    Disclaimer: I have not used RoR, and I have not generated tests. But, I will still dare to post this question. Quality Assurance is theoretically impossible to get 100% right in general (Undecidable problem ;), and it is hard in practice. So many developers do not understand that writing good automated tests is an art, and it is hard. When I hear that RoR generates the tests for you, I get very skeptical. It cannot be that easy. Testing is a general concept; it applies across languages. So does the concept of code contracts, it is similar for languages that support it. Code contracts do not generate themselves. The programmer must add the requirements and the promises manually, after doing some thinking about the algorithm / function. If a human gets it wrong, then the tools will propagate the error. Similarly with testing - it takes human judgement about what should happen. Tests do not write themselves, and we are far from the day when a business analyst can just have a conversation with a computer and tell it informally what the requirements are and have the computer do all the work. There is no magic ... how can RoR generate good tests for you? Please shed some light on this. Opinions are ok, for this is a community wiki. Thanks!

    Read the article

  • WCF Contract Name 'IMyService' could not be found?

    - by M3NTA7
    The contract name 'IMyService' could not be found in the list of contracts implemented by the service 'MyService'.. --- System.InvalidOperationException: The contract name 'IMyService' could not be found in the list of contracts implemented by the service 'MyService'. This is driving me crazy. I have a WCF web service that works on my dev machine, but when I copy it to a Virtual Machine that I am using for testing, I get the error that seems to indicate that I am not implementing the interface, but it does not make sense because the service does work on my windows xp IIS. the Virtual machine uses Windows Server 2003 IIS. Any ideas? One thing to note here is that I get this error on my VM even while just trying to access the service in a web browser as the client. Note: I am using principalPermissionMode="UseWindowsGroups", but that is not a problem on my local machine. I just add myself to the appropriate windows group. But no luck on my VM. system.serviceModel: <diagnostics> <messageLogging logEntireMessage="false" maxSizeOfMessageToLog="2147483647" /> </diagnostics> <services> <service behaviorConfiguration="MyServiceBehaviors" name="MyService"> <endpoint binding="basicHttpBinding" bindingConfiguration="basicHttpBinding" name="MyService" bindingName="basicHttpBinding" bindingNamespace="http://my.test.com" contract="IMyService"> </endpoint> </service> </services> <bindings> <basicHttpBinding> <binding name="basicHttpBinding" maxReceivedMessageSize="2147483647"> <readerQuotas maxStringContentLength="2147483647" /> <security mode="TransportCredentialOnly"> <transport clientCredentialType="Windows" proxyCredentialType="None" /> </security> </binding> </basicHttpBinding> <netTcpBinding> <binding name="WindowsClientOverTcp" maxReceivedMessageSize="2147483647"> <readerQuotas maxStringContentLength="2147483647" /> </binding> </netTcpBinding> <wsHttpBinding> <binding name="wsHttpBinding" maxReceivedMessageSize="2147483647"> <readerQuotas maxDepth="32" maxStringContentLength="2147483647" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> </binding> </wsHttpBinding> </bindings> <behaviors> <serviceBehaviors> <behavior name="MyServiceBehaviors"> <serviceMetadata httpGetEnabled="true" /> <serviceAuthorization principalPermissionMode="UseWindowsGroups" impersonateCallerForAllOperations="false" /> <serviceCredentials /> </behavior> </serviceBehaviors> </behaviors> Thanks, Glen

    Read the article

  • Problem with IIS 6.0 in WOW WCF 4 (.net 4.0)

    - by Kevin
    We just upgraded to WCF 4 on IIS 6 (running in WoW 32 bit mode), and all of a sudden the services started running into what appears to be concurrency problems. Upon finding out we had a problem, we changed the Behavior Configuration Changes on the WCF server to the follow: <serviceThrottling maxConcurrentCalls="1000" maxConcurrentInstances="1000" maxConcurrentSessions="1000" /> We also changed the number of worker processes from 1 to 5. Doing all of this seemed to have no effect. The service seemed to be running, but throttled by something. Is there anything else that might need to be changed to remove the "artificial" throttling? Were using the default configuration WCF which should be Per-Call (not singleton).

    Read the article

  • Unix list absolute file name

    - by Matthew Adams
    Given an arbitrary single argument representing a file (or directory, device, etc), how do I get the absolute path of the argument? I've seen many answers to this question involving find/ls/stat/readlink and $PWD, but none that suits my need. It looks like the closest answer is ksh's "whence" command, but I need it to work in sh/bash. Assume a file, foo.txt, is located in my home directory, /Users/matthew/foo.txt. I need the following behavior, despite what my current working directory is (I'm calling the command "abs"): (PWD is ~) $ abs foo.txt /Users/matthew/foo.txt $ abs ~/foo.txt /Users/matthew/foo.txt $ abs ./foo.txt /Users/matthew/foo.txt $ abs /Users/matthew/foo.txt /Users/matthew/foo.txt What would "abs" really be? TIA, Matthew

    Read the article

< Previous Page | 354 355 356 357 358 359 360 361 362 363 364 365  | Next Page >