Search Results

Search found 26337 results on 1054 pages for 'desktop computer'.

Page 358/1054 | < Previous Page | 354 355 356 357 358 359 360 361 362 363 364 365  | Next Page >

• How to make Inno Setup ignore the hidden attribute while searching for files?

  - by andi

  I have to copy into the installer folders containing hidden files (in my case Desktop.ini). I use a line similar to this one in the [Files] section: Source: "folder\*desktop.ini"; DestDir: "{app}\folder"; Flags: recursesubdirs uninsneveruninstall; Attribs: hidden This line only works if I remove the hidden attributes. If all are hidden, it complains that it could not find any files. How can I configure Inno to search for hidden files using patterns?

  Read the article

• Can i make an installer for my delphi programme?

  - by Hendriksen123

  I have made a delphi programme, which consists of a .exe and two custom file types that i have made (called Data.data and variables.data) I want to create a programme / find a programme that would place a copy of the main .exe in a folder in the program folders of XP, along with the .data files, and then place a shortcut to the programme on the desktop (ideally it would also put a folder in the start menu - all programmes with the programme. I should probably also make an uninstaller as well, that would remove the desktop shortcut, and delete the files. Is there a free piece of software i can use to create this, or is there any way i could achieve this myself through delphi?

  Read the article

• The rules to connect a web service trough the SSL and Certificates

  - by blgnklc

  There is a web service running on tomcat on a server. It is built on Java Servlet. It is listening others to call itself on a SSL enabled http port. so its web service adreess looks like: https://172.29.12.12/axis/services/XYZClient?wsdl On the other hand I want to connect the web service above from a windows application which is built on .NET frame work. Finally, when I want to connect the web service from my computer; I get some specific erros; Firstly I get; Proxy authentication error; then I added some new line to my code; Dim cr As System.Net.NetworkCredential = New System.Net.NetworkCredential("xname", "xsurname", "xdomainname") Dim myProxy As New WebProxy("http://mar.xxxyyy.com", True) myProxy.Credentials = cr Secondly, after this modifications It says that bad request. I did not get over this error. Moreover I did try to connect the web server on the same computer. I copied my executable program to the computer where the web service runs. The error was like; The underlying connection was closed: Could not establish trust relationship for SSL/TLS secure channel PS: When I try to connect to web service by using Internet Explorer; I see firstly some warnings about accepting an unknown certificate and I click take me to web service an I get there clearly. I want to know what are the basic elements to connect a web service, could you please tell me the requirements that I have to use on my windows project. regards bk

  Read the article

• Developing Qt applications in Unix systems using Qt Creator

  - by Jake Petroules

  I'm developing a Qt application in Linux using Qt Creator (2.1 RC). I've created 2 projects, and used the wizard to add the library project to the application project. However when I run it, I receive the error: /home/jakepetroules/silverlock/silverlock-build-desktop/desktop/silverlock: error while loading shared libraries: libsilverlocklib.so.1: cannot open shared object file: No such file or directory Is there some qmake variable I can set so that Qt Creator will set up the environment properly to run? It's quite annoying to have to copy all the files to another directory with a launcher script just to be able to test the build. On Windows it works perfectly - Qt Creator automatically adds the directories containing the DLLs to the PATH when it runs your application (where running it from Explorer would say DLL not found). Mac OS X is even worse, having to run install_name_tool on everything... So how can I set up my qmake files so everything works right from the run button in Qt Creator? Kind of hard to debug without this ability, too.

  Read the article

• Canceling a WSK I/O operation when driver is unloading

  - by eaducac

  I've been learning how to write drivers with the Windows DDK recently. After creating a few test drivers experimenting with system threads and synchronization, I decided to step it up a notch and write a driver that actually does something, albeit something useless. Currently, my driver connects to my other computer using Winsock Kernel and just loops and echoes back whatever I send to it until it gets the command "exit", which causes it to break out of the loop. In my loop, after I call WskReceive() to get some data from the other computer, I use KeWaitForMultipleObjects() to wait for either of two SynchronizationEvents. BlockEvent gets set by my IRP's CompletionRoutine() to let my thread know that it's received some data from the socket. EndEvent gets set by my DriverUnload() routine to tell the thread that it's being unloaded and it needs to terminate. When I send the "exit" command, the thread terminates with no problems, and I can safely unload the driver afterward. If I try to stop the driver while it's still waiting on data from the other computer, however, it blue screens with the error DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS. After I get the EndEvent but before I exit the loop, I've tried canceling the IRP with IoCancelIrp() and completing it with IoCompleteRequest(), but both of those give me DRIVER_IRQL_NOT_LESS_OR_EQUAL errors. I then tried calling WskDisconnect(), hoping that would cause the receive operation to complete, but that took me back to the CANCELLING_PENDING_OPERATIONS error. How do I cancel my pending I/O operation from my WSK socket at the IRQL I'm running at when the driver is unloaded?

  Read the article

• GetDeviceGammaRamp to adjust colors

  - by peter

  Hi, I overlay an OpenGL application (c++), this openGL application uses SetDeviceGammaRamp to set the brightness of the desktop to very high (dont know why). This application is fullscreen and looks good, but my overlay is very bright. Instead of the orange color with normal brightness, I get yellow because of the high gamma. What I want to do: Get the gamma that is currently set (using GetDeviceGammaRamp), and then use this to adjust the colors I set. Like; glColor4f(r, g, b, a) becomes glColor4f(r / gamma, g / gamma, b / gamma, a); So if the brightness of the desktop is very high, the r g and b values will be lower (darker) and will look like they should. How can I accomplish this? GetDeviceGammaRamp fills a table, how can I use it to modify my colors? Thanks

  Read the article

• what database should i choose ?

  - by MemoryLeak

  I use winforms to develop a desktop application, and right now I plan to use SQL server express, but the problem is, if i use sql server express, then the installation is much trouble, i need to install sql server first, and install my own applicaiton. Then I tried to use access 2003 as my database, then I only need to copy the mdb file with my application. But the access 's function is not that strong, the text length is limited to 255 byte. Is there any other database solution, which is easy to integrate to my application, and easy to install after i develop my application ? Many many desktop application have their own database, and easy to install and easy to use, what database do they use ?

  Read the article

• Would Mercurial help me work from 2 PCs?

  - by rikh

  I currently use Perforce for source control, but want to start working on the code from 2 different PCs at the same time (desktop and laptop). The laptop would not be able to access the perforce server very often, which makes Perforce a poor choice in this setup. Distributed source control tools like Mercurial seem better suited to the task, but I am still not clear if this would work or not. Does anyone have any experience of using Mercurial to work on 2 machines at once (eg desktop in the week, laptop in evening and weekends). Does it help, or is it still a pain the butt keeping everything in sync and knowing what is going on.

  Read the article

• Hibernate or JPA or JDBC or ???

  - by Yatendra Goel

  I am developing a Java Desktop Application but have some confusions in choosing a technology for my persistence layer. Till now, I have been using JDBC for DB operations. Now, Recently I learnt Hibernate and JPA but still I am a novice on these technologies. Now my question is What to use for my Java Desktop Application from the following? JPA Hibernate JDBC DAO any other suggestion from you... I know that there is no best choice from them and it totally depends on the complexity and the requeirements of the project so below are the requirements of my project It's not a complex application. It contains only 5 tables (and 5 entities) I wan't to make my code flexible so that I can change the database later easily The size of the application should remain as small as possible as I will have to distribute it to my clients through internet. It must be free to use in commercial development and distribution.

  Read the article

• Use resource font directly in VB.net/C#

  - by SamSol

  How to use resource font directly without saving font in local file system for standalone application[desktop application] in VB.net/C#?

  Read the article

• Winforms vs WPF

  - by m0s

  I am a student and I do freelance here and there when I have opportunity. I believe my strongest language is C#. I don't really know what is going on in real programming world, so I was wondering if WPF did take over WinForms? I know the differences between two and how two can be used simultaneously but, I just don't want to invest my time in learning dying technologies, I hope you understand. So, for windows desktop programming what would you recommend to master WinForms, WPF or maybe both? I also get a lot that desktop programming is dead already and one should only care about learning web programming.

  Read the article

• Java app makes screen display unresponsive after 10 minutes of user idle time

  - by Ross

  I've written a Java app that allows users to script mouse/keyboard input (JMacro, link not important, only for the curious). I personally use the application to automate character actions in an online game overnight while I sleep. Unfortunately, I keep coming back to the computer in the morning to find it unresponsive. Upon further testing, I'm finding that my application causes the computer to become unresponsive after about 10 minutes of user idle time (even if the application itself it simulating user activity). I can't seem to pin-point the issue, so I'm hoping somebody else might have a suggestion of where to look or what might be causing the issue. The relevant symptoms and characteristics: Unresponsiveness occurs after user is idle for 10 minutes User can still move the mouse pointer around the screen Everything but the mouse appears frozen... mouse clicks have no effect and no applications update their displays, including the Windows 7 desktop I left the task manager up along the with the app overnight so I could see the last task manager image before the screen freezes... the Java app is at normal CPU/Memory usage and total CPU usage is only ~1% After moving the mouse (in other words, the user comes back from being idle), the screen image starts updating again within 30 minutes (this is very hit and miss... sometimes 10 minutes, sometimes no results after two hours) User can CTRL-ALT-DEL to get to Windows 7's CTRL-ALT-DEL screen (after a 30 second pause). User is still able to move mouse pointer, but clicking any of the button options causes the screen to appear to freeze again On some very rare occasions, the system never freezes, and I come back to it in the morning with full responsiveness The Java app automatically stops input scripting in the middle of the night, so Windows 7 detects "real" idleness and turns the monitors into Standby mode... which they successfully come out of upon manually moving the mouse in the morning when I wake up, even though the desktop display still appears frozen Given the symptoms and characteristics of the issue, it's as if the Java app is causing the desktop display of the logged in user to stop updating, including any running applications. Programming concepts and Java packages used: Multi-threading Standard out and err are rerouted to a javax.swing.JTextArea The application uses a Swing GUI awt.Robot (very heavily used) awt.PointerInfo awt.MouseInfo System Specs: Windows 7 Professional Java 1.6.0 u17 In conclusion, I should stress that I'm not looking for any specific solutions, as I'm not asking a very specific question. I'm just wondering if anybody has run into a similar problem when using the Java libraries that I'm using. I would also gladly appreciate any suggestions for things to try to attempt to further pinpoint what is causing my problem. Thanks! Ross PS, I'll post an update/answer if I manage to stumble across anything else while I continue to debug this.

  Read the article

• Chrome Extension Manifest 'Matches'

  - by Aristotle

  I'm trying my hands at a simple Chrome Extension, but am running into a problem with providing a value for the matches array in my content_scripts. { "name": "My Extension", "version": "1.0", "description": "My Extension Experiment", "browser_action": { "default_icon": "icon.png", "default_title": "Ext", "default_popup": "popup.html" }, "content_scripts": { "matches": ["http://*"], "js": ["scripts.js"] } } When I try to load this extension into Chrome, I get the following message: Could not load extension from 'C:\Users\foo\Desktop\Extensions\bar'.Invalid value for 'content_scripts'. I cannot see what is "invalid" about my value though. What I'm trying to do is match every URL, so my extension can manipulate the DOM (via javascript within scripts.js) of any page it is ran on. Am I missing something, going about this all wrong, or what? update After posting this question, I did notice that the Google example was slightly different than mine, so I modified my code a bit to reflect their syntax: "content_scripts": [{ "matches": ["http://*"], "js": ["scripts.js"] }] That being said, I still get the following error when trying to load my extension: Could not load extension from 'C:\Users\foo\Desktop\Extensions\bar'. Invalid value for 'content_scripts[0].matches[0]'.

  Read the article

• What is the relationship between IRimTable and PersistenceStore?

  - by Martin

  The BlackBerry Desktop API has the interface IRimTable which apparently maps an "application database" on a BlackBerry device to a virtual structure (i.e, IRimTable has IRimRecords, each of which has IRimField) that developer can browse the handheld device data when it is connected to a desktop computer. Meanwhile, applications in the handheld device can store its data in PersistenceStore databases. The point where I'm stuck is the PersistenceStore API doesn't define any Table or Records or Fields. Does anybody knows what is the relationship between these two classes? And how does the mapping work (if at all) ?

  Read the article

• Create slide-in notifications à la Outlook in Windows with .NET

  - by Draak

  I am using .NET and am creating a desktop app/service that will display notifications in the corner of my Desktop when certain events are triggered. I don't want to use a regular Message Box b/c that would be too intrusive. The notifications would slide into view and then fade out after a few seconds. I am thinking of something that will act very much like the Outlook alerts that one gets when a new message arrives. The question is: Should I use WPF for this? I've never done anything with WPF but will happily try it if that's best means to the end. Is there a way to accomplish this with regular .NET libraries?

  Read the article

• How can I avoid Windows 8.1 resetting my font size?

  - by Michael Tsang

  I am using Windows 8.1 on my laptop, which has a 15.6" screen with resolution 1366x768. I measured the screen with a ruler and calculated its DPI, which is 101. Therefore, I have set the scaling to 105%. However, when I change to an external monitor, which is a huge one with resolution 1920x1080 and DPI 93, I need to change the scaling to 97% but when I change the DPI back and forth, my font sizes have get resetted. I prefer using font sizes 14 on my title bars, message boxes and icons and font sizes 13 on my palette titles, menus and tooltips. However, as my laptop screen is too small, in order to make my apps fit on screen, I use font sizes 12 on my title bars, message boxes and icons and font sizes 11 on my palette titles, menus and tooltips. I don't know why I can't resize the window to make it larger than my screen in Windows (but it is possible in Kubuntu), therefore, some parts of my apps cannot be shown with my preferred font size. I have tried changing both the DPI and the font size by using .reg files. Before switching to my laptop screen, I apply the following: Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Control Panel\Desktop] "LogPixels"=dword:00000065 [HKEY_CURRENT_USER\Control Panel\Desktop\WindowMetrics] "CaptionFont"=hex:ef,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,bc,02,00,00,\ 00,00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "SmCaptionFont"=hex:f0,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,bc,02,00,\ 00,00,00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "MenuFont"=hex:f0,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,90,01,00,00,00,\ 00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "StatusFont"=hex:f0,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,90,01,00,00,\ 00,00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "MessageFont"=hex:ef,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,90,01,00,00,\ 00,00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "IconFont"=hex:ef,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,90,01,00,00,00,\ 00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "AppliedDPI"=dword:00000065 Before switching to my external display, I apply this: Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Control Panel\Desktop] "LogPixels"=dword:0000005d [HKEY_CURRENT_USER\Control Panel\Desktop\WindowMetrics] "CaptionFont"=hex:ed,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,bc,02,00,00,\ 00,00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "SmCaptionFont"=hex:ee,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,bc,02,00,\ 00,00,00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "MenuFont"=hex:ef,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,90,01,00,00,00,\ 00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "StatusFont"=hex:ef,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,90,01,00,00,\ 00,00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "MessageFont"=hex:ed,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,90,01,00,00,\ 00,00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "IconFont"=hex:ed,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,90,01,00,00,00,\ 00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "AppliedDPI"=dword:0000005d I expect after applying the file, the DPI settings and the font sizes take effect at the next sign in. However, on my laptop screen, after I applied the file, signed out and in, the DPI setting changed, but the font sizes were resetted to tiny, and I had to apply the same file, signed out and in again to get the correct font size. The situation is even worse on my external monitor. After I applied the file, signed out and in, both the DPI setting and the font sizes were resetted to their default values, which were 96 DPI (the physical DPI as measured by dividing the resolution by the physical size is 93) and font size 9, which is totally unacceptable. How can I write the .reg files such that the settings can be correctly applied with a single sign in?

  Read the article

• Why is lua crashing after extracting zip files?

  - by Brian T Hannan

  I have the following code but it crashes every time it reaches the end of the function, but it successfully extracts all the files and puts them in the right location. require "zip" function ExtractZipAndCopyFiles(zipPath, zipFilename, destinationPath) local zfile, err = zip.open(zipPath .. zipFilename) -- iterate through each file insize the zip file for file in zfile:files() do local currFile, err = zfile:open(file.filename) local currFileContents = currFile:read("*a") -- read entire contents of current file local hBinaryOutput = io.open(destinationPath .. file.filename, "wb") -- write current file inside zip to a file outside zip if(hBinaryOutput)then hBinaryOutput:write(currFileContents) hBinaryOutput:close() end end zfile:close() end -- call the function ExtractZipAndCopyFiles("C:\\Users\\bhannan\\Desktop\\LUA\\", "example.zip", "C:\\Users\\bhannan\\Desktop\\ZipExtractionOutput\\") Why does it crash every time it reaches the end?

  Read the article

• Vbscript - Object Required for DateLastModified

  - by Kenny Bones

  I don't really know what's wrong right here. I'm trying to create a vbscript that basically checks two Folders for their files and compare the DateLastModified attribute of each and then copies the source files to the destination folder if the DateLastModified of the source file is newer than the existing one. I have this code: Dim strSourceFolder, strDestFolder Dim fso, objFolder, colFiles strSourceFolder = "c:\users\user\desktop\Source\" strDestFolder = "c:\users\user\desktop\Dest\" Set fso = CreateObject("Scripting.FileSystemObject") Set objFolder = fso.GetFolder(strSourceFolder) Set colFiles = objFolder.Files For each objFile in colFiles Dim DateModified DateModified = objFile.DateLastModified ReplaceIfNewer objFile, DateModified, strSourceFolder, strDestFolder Next Sub ReplaceIfNewer (sourceFile, DateModified, SourceFolder, DestFolder) Const OVERWRITE_EXISTING = True Dim fso, objFolder, colFiles, sourceFileName, destFileName Dim DestDateModified, objDestFile Set fso = CreateObject("Scripting.FileSystemObject") sourceFileName = fso.GetFileName(sourceFile) destFileName = DestFolder & sourceFileName if fso.FileExists(destFileName) Then objDestFile = fso.GetFile(destFileName) DestDateModified = objDestFile.DateLastModified msgbox "File last modified: " & DateModified msgbox "New file last modified: " & DestDateModified End if End Sub And I get the error: On line 34, Char 3 "Object required: 'objDestFile' But objDestFile IS created?

  Read the article

• How to Connect to a web service (SSL enabled and proxy interface)

  - by blgnklc

  There is a web service running on tomcat on a server. It is built on Java Servlet. It is listening others to call itself on a SSL enabled http port. so its web service adreess looks like: https://172.29.12.12/axis/services/XYZClient?wsdl On the other hand I want to connect the web service above from a windows application which is built on .NET frame work. Finally, when I want to connect the web service from my computer; I get some specific erros; Firstly I get; Proxy authentication error; then I added some new line to my code; Dim cr As System.Net.NetworkCredential = New System.Net.NetworkCredential("xname", "xsurname", "xdomainname") Dim myProxy As New WebProxy("http://mar.xxxyyy.com", True) myProxy.Credentials = cr Secondly, after this modifications It says that bad request. I did not get over this error. Moreover I did try to connect the web server on the same computer. I copied my executable program to the computer where the web service runs. The error was like; The underlying connection was closed: Could not establish trust relationship for SSL/TLS secure channel PS: When I try to connect to web service by using Internet Explorer; I see firstly some warnings about accepting an unknown certificate and I click take me to web service an I get there clearly. I want to know what are the basic elements to connect a web service, could you please tell me the requirements that I have to use on my windows project. regards bk

  Read the article

• Boost Asio UDP retrieve last packet in socket buffer

  - by Alberto Toglia

  I have been messing around Boost Asio for some days now but I got stuck with this weird behavior. Please let me explain. Computer A is sending continuos udp packets every 500 ms to computer B, computer B desires to read A's packets with it own velocity but only wants A's last packet, obviously the most updated one. It has come to my attention that when I do a: mSocket.receive_from(boost::asio::buffer(mBuffer), mEndPoint); I can get OLD packets that were not processed (almost everytime). Does this make any sense? A friend of mine told me that sockets maintain a buffer of packets and therefore If I read with a lower frequency than the sender this could happen. ¡? So, the first question is how is it possible to receive the last packet and discard the ones I missed? Later I tried using the async example of the Boost documentation but found it did not do what I wanted. http://www.boost.org/doc/libs/1_36_0/doc/html/boost_asio/tutorial/tutdaytime6.html From what I could tell the async_receive_from should call the method "handle_receive" when a packet arrives, and that works for the first packet after the service was "run". If I wanted to keep listening the port I should call the async_receive_from again in the handle code. right? BUT what I found is that I start an infinite loop, it doesn't wait till the next packet, it just enters "handle_receive" again and again. I'm not doing a server application, a lot of things are going on (its a game), so my second question is, do I have to use threads to use the async receive method properly, is there some example with threads and async receive? Thanks for you attention.

  Read the article

• Communicating with all network computers regardless of IP address

  - by Stephen Jennings

  I'm interested in finding a way to enumerate all accessible devices on the local network, regardless of their IP address. For example, in a 192.168.1.X network, if there is a computer with a 10.0.0.X IP address plugged into the network, I want to be able to detect that rogue computer and preferrably communicate with it as well. Both computers will be running this custom software. I realize that's a vague description, and a full solution to the problem would be lengthy, so I'm really looking for help finding the right direction to go in ("Look into using class XYZ and ABC in this manner") rather than a full implementation. The reason I want this is that our company ships imaged computers to thousands of customers, each of which have different network settings (most use the same IP scheme, but a large percentage do not, and most do not have DHCP enabled on their networks). Once the hardware arrives, we have a hard time getting it up on the network, especially if the IP scheme doesn't match, since there is no one technically oriented on-site. Ideally, I want to design some kind of console to be used from their main workstation which looks out on the network, finds all computers running our software, displays their current IP address, and allows you to change the IP. I know it's possible to do this because we sell a couple pieces of custom hardware which have exactly this capability (plug the hardware in anywhere and view it from another computer regardless of IP), but I'm hoping it's possible to do in .NET 2.0, but I'm open to using .NET 3.5 or P/Invoke if I have to.

  Read the article

• What exactly is a reentrant function?

  - by eSKay

  Most of the times, the definition of reentrance is quoted from Wikipedia: A computer program or routine is described as reentrant if it can be safely called again before its previous invocation has been completed (i.e it can be safely executed concurrently). To be reentrant, a computer program or routine: Must hold no static (or global) non-constant data. Must not return the address to static (or global) non-constant data. Must work only on the data provided to it by the caller. Must not rely on locks to singleton resources. Must not modify its own code (unless executing in its own unique thread storage) Must not call non-reentrant computer programs or routines. How is safely defined? If a program can be safely executed concurrently, does it always mean that it is reentrant? What exactly is the common thread between the six points mentioned that I should keep in mind while checking my code for reentrant capabilities? Also, Are all recursive functions reentrant? Are all thread-safe functions reentrant? Are all recursive and thread-safe functions reentrant? While writing this question, one thing comes to mind: Are the terms like reentrance and thread safety absolute at all i.e. do they have fixed concrete definations? For, if they are not, this question is not very meaningful. Thanks!

  Read the article

• Creating a local CDMA or GSM network?

  - by Jeffrey Sambells

  I am developing a number of different mobile applications for a number of different mobile devices and I want to quickly test in a local development environment. I was wondering if it is possible (with some sort of hardware) to set up a local desktop CDMA / GSM base station for testing devices over a local personal cellular network. The range does not have to be very far. The alternative is purchasing a SIM card and plans for various carriers but not all carriers/network types are available in our area. I'm sure I had seen some sort of desktop device that would let you setup local networks for development/testing purposes but can't seem to find it. Thanks.

  Read the article

• Are you using Virtual Machine as your primary development enviroment?

  - by Click Ok

  Recently I have purchased a notebook that cames with Windows Home Basic (that don't have with ASP.Net/IIS. I thought in upgrade the Windows version to one with ASP.Net/IIS, but I thought in another possibility: I have an Hard Disk Case with a 360Gb HD. I thought in create a virtual machine with Windows Ultimate (installing too ASP.Net, IIS and Visual Studio 2008) in this HD Case, then I can access my "development enviroment" in any computer that I will work on (my desktop machine and my notebook). But I was worried about the performance. I don't have experience working in Virtual Machines (I use it just to quick compatibility tests)... Are you using Virtual Machine as your primary development enviroment? What your finds? ==================== Thanks for your answers! It really did help me! I would like to know too about portability ie.: the virtual machine that I created in my laptop will work in the desktop? I will need re-activate Windows?

  Read the article

• How to restore from hotcopy backup in Trac

  - by raki

  I have a hotcopy backup file from the trac sudo trac-admin /trac/projectname hotcopy /home/user/desktop/projctname.tracbkp How do i restore this into another project says "projectName2"

  Read the article

< Previous Page | 354 355 356 357 358 359 360 361 362 363 364 365  | Next Page >