Search Results

Search found 10481 results on 420 pages for 'identity insert'.

Page 359/420 | < Previous Page | 355 356 357 358 359 360 361 362 363 364 365 366  | Next Page >

• User control always crashes Visual Studio

  - by NickAldwin

  I'm trying to open a user control in one of our projects. It was created, I believe, in VS 2003, and the project has been converted to VS2008. I can view the code fine, but when I try to load the designer view, VS stops responding and I have to close it with the task manager. I have tried leaving it running for several minutes, but it does not do anything. I ran "devenv /log" but didn't see anything unusual in the log. I can't find a specific error message anywhere. Any idea what the problem might be? Is there a lightweight editing mode I might be able to use or something? The reason I need to have a look at the visual representation of this control is to decide where to insert some new components. I've tried googling it and searching SO, but either I don't know what to search or there is nothing out there about this. Any help is appreciated. (The strangest thing is that the user control seems to load fine in another project which references, but VS crashes as soon as I even so much as click on it in that project.)

  Read the article

• Configuring an offscreen framebuffer fails the completeness test

  - by randallmeadows

  I'm trying to create an offscreen framebuffer into which I can do some OpenGL drawing, and then pull the bits out manually. I'm following the instructions here, but in step 4, status is 0 instead of GL_FRAMEBUFFER_COMPLETE_OES. If I insert a call go glGetError() after every gl call, it returns 0 (GL_NO_ERROR) every time. But, the values of variables do not change during the call. E.g., GLuint framebuffer; glGenFramebuffersOES(1, &framebuffer); glBindFramebufferOES(GL_FRAMEBUFFER_OES, framebuffer); the value of framebuffer does not get altered at all (even when I change it to some arbitrary value and re-execute). It's almost like the gl calls are not actually being made. I'm linking against OpenGLES framework, and get no compile, link, or run-time errors (or warnings). I'm at a loss as to what to do to fix this. I've tried continuing on with my drawing, but do not see the results I expect, but at this point I can't tell whether it's because of the above error, or the conversion to a UIImage.

  Read the article

• How to preserve order of temp table rows when inner joined with another table?

  - by Triynko

  Does an SQL Server "join" preserve any kind of row order consistently (i.e. that of the left table or that of the right table)? Psuedocode: create table #p (personid bigint); foreach (id in personid_list) insert into #p (personid) values (id) select id from users inner join #p on users.personid = #p.id Suppose I have a list of IDs that correspond to person entries. Each of those IDs may correspond to zero or more user accounts (since each person can have multiple accounts). To quickly select columns from the users table, I populate a temp table with person ids, then inner join it with the users table. I'm looking for an efficient way to ensure that the order of the results in the join matches the order of the ids as they were inserted into the temp table, so that the user list that's returned is in the same order as the person list as it was entered. I've considered the following alternatives: using "#p inner join users", in case the left table's order is preserved using "#p left join users where id is not null", in case a left join preserves order and the inner join doesn't using "create table (rownum int, personid bigint)", inserting an incrementing row number as the temp table is populated, so the results can be ordered by rownum in the join using an SQL Server equivalent of the "order by order of [tablename]" clause available in DB2 I'm currently using option 3, and it works... but I hate the idea of using an order by clause for something that's already ordered. I just don't know if the temp table preserves the order in which the rows were inserted or how the join operates and what order the results come out in.

  Read the article

• Name for method that takes a string value and returns DBNull.Value || string

  - by David Murdoch

  I got tired of writing the following code: /* Commenting out irrelevant parts public string MiddleName; public void Save(){ SqlCommand = new SqlCommand(); // blah blah...boring INSERT statement with params etc go here. */ if(MiddleName==null){ myCmd.Parameters.Add("@MiddleName", DBNull.Value); } else{ myCmd.Parameters.Add("@MiddleName", MiddleName); } /* // more boring code to save to DB. }*/ So, I wrote this: public static object DBNullValueorStringIfNotNull(string value) { object o; if (value == null) { o = DBNull.Value; } else { o = value; } return o; } // which would be called like: myCmd.Parameters.Add("@MiddleName", DBNullValueorStringIfNotNull(MiddleName)); If this is a good way to go about doing this then what would you suggest as the method name? DBNullValueorStringIfNotNull is a bit verbose and confusing. I'm also open to ways to alleviate this problem entirely. I'd LOVE to do this: myCmd.Parameters.Add("@MiddleName", MiddleName==null ? DBNull.Value : MiddleName); but that won't work. I've got C# 3.5 and SQL Server 2005 at my disposal if it matters.

  Read the article

• Fastest way to convert a list of doubles to a unique list of integers?

  - by javanix

  I am dealing with a MySQL table here that is keyed in a somewhat unfortunate way. Instead of using an auto increment table as a key, it uses a column of decimals to preserve order (presumably so its not too difficult to insert new rows while preserving a primary key and order). Before I go through and redo this table to something more sane, I need to figure out how to rekey it without breaking everything. What I would like to do is something that takes a list of doubles (the current keys) and outputs a list of integers (which can be cast down to doubles for rekeying). For example, input {1.00, 2.00, 2.50, 2.60, 3.00} would give output {1, 2, 3, 4, 5). Since this is a database, I also need to be able to update the rows nicely: UPDATE table SET `key`='3.00' WHERE `key`='2.50'; Can anyone think of a speedy algorithm to do this? My current thought is to read all of the doubles into a vector, take the size of the vector, and output a new vector with values from 1 => doubleVector.size. This seems pretty slow, since you wouldn't want to read every value into the vector if, for instance, only the last n/100 elements needed to be modified. I think there is probably something I can do in place, since only values after the first non-integer double need to be modified, but I can't for the life of me figure anything out that would let me update in place as well. For instance, setting 2.60 to 3.00 the first time you see 2.50 in the original key list would result in an error, since the key value 3.00 is already used for the table.

  Read the article

• Opaque tenant identification with SQL Server & NHibernate

  - by Anton Gogolev

  Howdy! We're developing a nowadays-fashionable multi-tenanted SaaS app (shared database, shared schema), and there's one thing I don't like about it: public class Domain : BusinessObject { public virtual long TenantID { get; set; } public virtual string Name { get; set; } } The TenantID is driving me nuts, as it has to be accounted for almost everywhere, and it's a hassle from security standpoint: what happens if a malicious API user changes TenantID to some other value and will mix things up. What I want to do is to get rid of this TenantID in our domain objects altogether, and to have either NHibernate or SQL Server deal with it. From what I've already read on the Internets, this can be done with CONTEXT_INFO (here's a NHibernatebased implementation), NHibernate filters, SQL Views and with combination thereof. Now, my requirements are as follows: Remove any mentions of TenantID from domain objects ...but have SQL Server insert it where appropriate (I guess this is achieved with default constraints) ...and obviously provide support for filtering based on this criteria, so that customers will never see each other's data If possible, avoid SQL Server views. Have a solution which plays nicely with NHibernate, SQL Servers' MARS and general nature of SaaS apps being highly concurrent What are your thoughts on that?

  Read the article

• why DataColumn AllowDbNull is true even if oracle db does not allow null

  - by matti

  Hi. I have column SomeId in table SomeLink. When I look with tOra or Sql Plus Worksheet both state: tOra: Column name Data type Default Null Comment SOMEID INTEGER {null} NOT NULL {null} Sql Plus: SOMEID NOT NULL NUMBER(38) I have authored a method that's intended to give default values to all NOT NULL fields that don't have values: public static void GetDefaultValuesForNonNullColumns(DataRow row) { foreach(DataColumn col in row.Table.Columns) { if (Convert.IsDBNull(row[col]) && !col.AllowDBNull) { if (ColumnIsNumeric(col.DataType)) row[col] = 0; else if (col.DataType == typeof(DateTime)) row[col] = DateTime.Now; else if (col.DataType == typeof(String)) row[col] = string.Empty; else if (col.DataType == typeof(Char)) row[col] = ' '; else throw new Exception(string.Format("Unsupported column type: {0}", col.DataType)); } } } When SOMEID is handled in loop the AllowDBNull = true. I really can't understand. The table is created in DataSet like this: _someLinkAdptr = _dbFactory.CreateDataAdapter(); _someLinkAdptr.SelectCommand = _dbFactory.CreateCommand(); _someLinkAdptr.SelectCommand.Connection = _cnctn; _someLinkAdptr.SelectCommand.CommandText = GetSomeLinkSelectTxtAndParams(_someLinkAdptr.SelectCommand, UndefinedValue.ToString(), UndefinedValue.ToString()); Select command returns no rows. The idea is that I can then use commandbuilder to get InsertCommand without building it myself. The row is added to dataset's table like this: private static void CreateDocLink(int anId, int anotherId) { DataRow row = _someDataSet.Tables["SomeLink"].NewRow(); row["AnId"] = anId; row["AnotherId"] = anotherId; Utility.GetDefaultValuesForNonNullColumns(row); _someDataSet.Tables["SomeLink"].Rows.Add(row); } When DataAdapter is updated to oracle db I get: ORA-01400: cannot insert NULL into (SOMESCHEMA.SOMELINK.SOMEID) Cheers & BR -Matti

  Read the article

• Synchronizing Access to a member of the ASP.NET session

  - by Sam

  I'm building a Javascript application and eash user has an individual UserSession. The application makes a bunch of Ajax calls. Each Ajax call needs access to a single UserSession object for the user. Each Ajax call needs a UserSession object. Data in the UserSession object is unique to each user. Originally, during each Ajax call I would create a new UserSession object and it's data members were stored in the ASP.NET Session. However, I found that the UserSession object was being instantiated a lot. To minimize the construction of the UserSession object, I wrapped it in a Singleton pattern and sychronized access to it. I believe that the synchronization is happening application wide, however I only need it to happen per user. I saw a post here that says the ASP.NET cache is synchronized, however the time between creating the object and inserting it into the cache another Thread could start construction it's another object and insert it into the cache. Here is the way I'm currently synchronizing access to the object. Is there a better way than using "lock"... should be be locking on the HttpContext.Session object? private static object SessionLock = new object(); public static WebSession GetSession { get { lock (SessionLock) { try { var context = HttpContext.Current; WebSession result = null; if (context.Session["MySession"] == null) { result = new WebSession(context); context.Session["MySession"] = result; } else { result = (WebSession)context.Session["MySession"]; } return result; } catch (Exception ex) { ex.Handle(); return null; } } } }

  Read the article

• Why would a script not like using MySQLi but is fine with MySQL?

  - by Taylor

  I'm having some issues using mysqli to execute a script with SELECT,DELETE,INSERT and UPDATE querys. They work when using norm mysql such as mysql_connect but im getting strange results when using mysqli. It works fine with a lot of the SELECT querys in other scripts but when it comes to some admin stuff it messes up. Its difficult to explain without attaching the whole script. This is the function for modifying... function database_queryModify($sql,&$insertId) { global $databaseServer; global $databaseName; global $databaseUsername; global $databasePassword; global $databaseDebugMode; $link = @mysql_connect($databaseServer,$databaseUsername,$databasePassword); @mysql_select_db($databaseName,$link); $result = mysql_query($sql,$link); if (!$result && $databaseDebugMode) { print "[".$sql."][".mysql_error()."]"; } $insertId = mysql_insert_id(); return mysql_affected_rows(); } and heres what I changed it to for mysqli function database_queryModify($sql,&$insertId) { global $databaseServer; global $databaseName; global $dbUser_feedadmin; global $dbUser_feedadmin_pw; global $databaseDebugMode; $link = @mysqli_connect($databaseServer,$dbUser_feedadmin,$dbUser_feedadmin_pw,$databaseName); $result = mysqli_query($link, $sql); if (!$result && $databaseDebugMode) { print "[".$sql."][".mysqli_error()."]"; } $insertId = mysqli_insert_id(); return mysqli_affected_rows(); } Does that look right? It isn't actually producing an error but its not functioning in the same way as when using mysql. any ideas?

  Read the article

• problem when cloning jQuery UI datepicker

  - by h3

  I have a div in which there is a datepicker. I use something like this to clone it: mydiv = $('#someDiv'); // works fine so far mydiv.find('input.datefield').datepicker(); // clone without the events and insert newDiv = myDiv.clone(false).insertAfter(myDiv); // datepicker won't re-init if this class is present newDiv.find('.hadDatepicker').removeClass('hadDatepicker'); // reinitialize datepicker newDiv.find('input.datefield').datepicker(); This is a stripped down version of my code. It works and the calendar shows up as expected where it is expected .. but when a date is clicked, the previous datepicker's value gets updated.. (the one from which it was cloned). I've tried to destroy the (inexisting) instance before like this: newDiv.find('input.datefield').datepicker('destroy').datepicker(); No luck .. I've checked how it keeps track of instances and manually cleared the data like this: newDiv.find('input.datefield').data('datepicker', false).datepicker('destroy').datepicker(); Still no luck. What I don't understand is that only the date selection behavior is buggy, everything else works as expected. I really don't know what else to check now ..

  Read the article

• Python creating a dictionary and swapping these into another file

  - by satsurae

  Hi all, I have two tab delimited .csv file. From one.csv I have created a dictionary which looks like: 'EB2430': ' "\t"idnD "\t"yjgV "\t"b4267 "\n', 'EB3128': ' "\t"yagE "\t\t"b0268 "\n', 'EB3945': ' "\t"maeB "\t"ypfF "\t"b2463 "\n', 'EB3944': ' "\t"eutS "\t"ypfE "\t"b2462 "\n', I would like to insert the value of the dictionary into the second.csv file which looks like: "EB2430" 36.81 364 222 4 72 430 101 461 1.00E-063 237 "EB3128" 26.04 169 108 6 42 206 17 172 6.00E-006 45.8 "EB3945" 20.6 233 162 6 106 333 33 247 6.00E-005 42.4 "EB3944" 19.07 367 284 6 1 355 1 366 2.00E-023 103 With a resultant output tab delimited: 'EB2430' idnD yjgV b4267 36.81 364 222 4 72 430 101 461 1.00E-063 237 'EB3128' yagE b0268 26.04 169 108 6 42 206 17 172 6.00E-006 45.8 'EB3945' maeB ypfF b2463 20.6 233 162 6 106 333 33 247 6.00E-005 42.4 'EB3944' eutS ypfE b2462 19.07 367 284 6 1 355 1 366 2.00E-023 103 Here is my code for creating the dictionary: f = open ("one.csv", "r") g = open ("second.csv", "r") eb = [] desc = [] di = {} for line in f: for row in f: eb.append(row[1:7]) desc.append(row[7:]) di = dict(zip(eb,desc)) Sorry for it being so long-winded!! I've not been programming for long. Cheers! Sat

  Read the article

• Meaning of Execute_priv on mysql.db table

  - by Ben Reisner

  I created user 'restriceduser' on my mysql server that is 'locked down'. The mysql.user table has a N for all priveledges for that account. The mysql.db table has Y for only Select, Insert, Update, Delete, Create, Drop; all other privileges are N for that account. I tried to create a stored procedure and then grant him access to run only that procedure, no others, but it does not work. The user receives: Error: execute command denied to user 'restricteduser'@'%' for routine 'mydb.functionname' The stored procedure: CREATE DEFINER = 'restriceduser'@'%' FUNCTION `functionname`(sIn MEDIUMTEXT, sformat MEDIUMTEXT) RETURNS int(11) NOT DETERMINISTIC CONTAINS SQL SQL SECURITY DEFINER COMMENT '' BEGIN .... END; The grant statement I tried: GRANT EXECUTE ON PROCEDURE mydb.functionname TO 'restricteduser'@'%'; I was able to work around by modifying his mysql.db entry with update mysql.db set execute_priv='Y' where user='restricteduser' This seems to be more then I want, because it opens up permissions for him to run any stored procedure in that database, while I only wanted him to have permissions to run the designated function. Does anyone see where my issue may lie?

  Read the article

• Windows.Forms RichTextBox Control - Avoid inserting large data.

  - by SchlaWiener

  I have a Windows Form with a RichTextBox on it. The content of the RichTextBox is written to a database field that ist limited to 64k data. For my purpose that is way more than enough text to store. I have set the MaxLength property to avoid insertng more data than allowed. rtcControl.MaxLength = 65536 Howevery, that only restricts the amount of characters that so is allowed to put in the text. But with the formatting overhead from the Rtf I can type more text than I should be allowed to. It even get's worse if I insert a large image, which dosn't increase the TextLength at all but the Rtf Length grows quite a lot. At the moment I check the Length of the richttextboxes' Rtf property in the FormClosing event and display a message to the user if it's to large. However that is just a workaround because I want to disallow putting more data than allowed into the control (like in a textbox if you exceed the MaxLength property nothing is inserted into the control and you hear the default beep(). Any ideas how to achive this? I already tried: using a custom control which extends the richtextbox and shadows th Rtf property to intercept the insertation. But it seems it isn't executed if I add text. Even the TextChanged Event does not fire if I type smth. in the control.

  Read the article

• Inserting an element within jQuery Validation plugin's error template

  - by simshaun

  I'm utilizing the jQuery Validation plugin for my form. It lets you change the errorElement and wrap the errorElement using with the wrapper option. But, I want to insert an element within errorElement like this: <label class="error"><em></em>Error message goes here</label> Is there an easy way to accomplish inserting the em tag? I've tried prepending the em tag using the errorPlacement option (see below), but it seems the plugin is replacing the contents of errorElement afterwards. $.validator.setDefaults({ errorPlacement: function(error, element) { error.prepend('<em/>'); error.insertBefore(element); } }); I've also tried prepending the em tag using the showErrors option (see below). Again, it seems the plugin is replacing the contents of errorElement afterwards. $.validator.setDefaults({ showErrors: function(errorMap, errorList) { for (var i = 0; i < errorList.length; i++) { var error = errorList[i], $label = this.errorsFor(error.element), $element = $(error.element); if ($label.length && $label.find('em').length == 0) { $label.prepend('<em/>'); } } this.defaultShowErrors(); } }); I've also tried modifying the plugin so that when the error element is generated, the <em> tag is prepended. That works until I focus on a form element that has an error, after which the em tag is removed. (It's doing this because jQuery validation is constantly updating the contents of the error element as I focus and/or type in the field, therefore erasing my em tag added at error-element creation.)

  Read the article

• Fastest way to modify a decimal-keyed table in MySQL?

  - by javanix

  I am dealing with a MySQL table here that is keyed in a somewhat unfortunate way. Instead of using an auto increment table as a key, it uses a column of decimals to preserve order (presumably so its not too difficult to insert new rows while preserving a primary key and order). Before I go through and redo this table to something more sane, I need to figure out how to rekey it without breaking everything. What I would like to do is something that takes a list of doubles (the current keys) and outputs a list of integers (which can be cast down to doubles for rekeying). For example, input {1.00, 2.00, 2.50, 2.60, 3.00} would give output {1, 2, 3, 4, 5). Since this is a database, I also need to be able to update the rows nicely: UPDATE table SET `key`='3.00' WHERE `key`='2.50'; Can anyone think of a speedy algorithm to do this? My current thought is to read all of the doubles into a vector, take the size of the vector, and output a new vector with values from 1 => doubleVector.size. This seems pretty slow, since you wouldn't want to read every value into the vector if, for instance, only the last n/100 elements needed to be modified. I think there is probably something I can do in place, since only values after the first non-integer double need to be modified, but I can't for the life of me figure anything out that would let me update in place as well. For instance, setting 2.60 to 3.00 the first time you see 2.50 in the original key list would result in an error, since the key value 3.00 is already used for the table.

  Read the article

• How to get MySQL database to appear on index.php

  - by Teddy Truong

  Hi, I have a submission form on my website (index.php) and I have the data(user submissions) being stored into a MySQL database. Right now, I have the user submitting a post and then the page directs them to an update.php which shows what they inputed. However, I want all of the data in the database in MySQL to be shown on the index.php. It's a lot like a comment system. User submits a post... and sees their post above the other submitted posts all on the same page. I think I'm missing AJAX... ? Here is the code for index.php <div align="center"> <p>&nbsp;</p> <h2 align="center" class="Title"><em><strong>REDACTED</strong></em></h2> <form id="form1" name="form1" method="post" action="update.php"> <hr /> <label><br /> <form action="update.php" method="post"> REDACTED: <input type="text" name="text" /> <input type="submit" /> </form> </label> </form> </div> On update.php I have this: ?php $text = $_POST['text']; $myString = "REDACTED"; mysql_connect ("db----.net", "-----3", "------------") or die ('Error: ' . mysql_error()); mysql_select_db ("-----------"); $query="INSERT INTO TextArea (ID, text) VALUES ('NULL', '".$text."')"; mysql_query($query) or die ('Error updating database'); echo " $myString "," $text "; ?> Thanks a lot!

  Read the article

• object datasource problems in visual studio 2008,

  - by kamal

  After going to the process of adding the various attributes like insert,delete and update.But when i run it through the browser ,editing works but updating and deleting doesn't !(for the update and shows the same thing for delete,my friends think i need to use codes to repair the problems,can you help me please.it shows this: Server Error in '/WebSite3' Application. ObjectDataSource 'ObjectDataSource1' could not find a non-generic method 'Update' that has parameters: First_name, Surname, Original_author_id, First name, original_author id. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidOperationException: ObjectDataSource 'ObjectDataSource1' could not find a non-generic method 'Update' that has parameters: First_name, Surname, Original_author_id, First name, original_author id. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [InvalidOperationException: ObjectDataSource 'ObjectDataSource1' could not find a non-generic method 'Update' that has parameters: First_name, Surname, Original_author_id, First name, original_author id.] System.Web.UI.WebControls.ObjectDataSourceView.GetResolvedMethodData(Type type, String methodName, IDictionary allParameters, DataSourceOperation operation) +1119426 System.Web.UI.WebControls.ObjectDataSourceView.ExecuteUpdate(IDictionary keys, IDictionary values, IDictionary oldValues) +1008 System.Web.UI.DataSourceView.Update(IDictionary keys, IDictionary values, IDictionary oldValues, DataSourceViewOperationCallback callback) +92 System.Web.UI.WebControls.GridView.HandleUpdate(GridViewRow row, Int32 rowIndex, Boolean causesValidation) +907 System.Web.UI.WebControls.GridView.HandleEvent(EventArgs e, Boolean causesValidation, String validationGroup) +704 System.Web.UI.WebControls.GridView.OnBubbleEvent(Object source, EventArgs e) +95 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +37 System.Web.UI.WebControls.GridViewRow.OnBubbleEvent(Object source, EventArgs e) +123 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +37 System.Web.UI.WebControls.LinkButton.OnCommand(CommandEventArgs e) +118

  Read the article

• MySQL Normalization stored procedure performance

  - by srkiNZ84

  Hi, I've written a stored procedure in MySQL to take values currently in a table and to "Normalize" them. This means that for each value passed to the stored procedure, it checks whether the value is already in the table. If it is, then it stores the id of that row in a variable. If the value is not in the table, it stores the newly inserted value's id. The stored procedure then takes the id's and inserts them into a table which is equivalent to the original de-normailized table, but this table is fully normalized and consists of mainly foreign keys. My problem with this design is that the stored procedure takes approximately 10ms or so to return, which is too long when you're trying to work through some 10million records. My suspicion is that the performance is to do with the way in which I'm doing the inserts. i.e. INSERT INTO TableA (first_value) VALUES (argument_from_sp) ON DUPLICATE KEY UPDATE id=LAST_INSERT_ID(id); SET @TableAId = LAST_INSERT_ID(); The "ON DUPLICATE KEY UPDATE" is a bit of a hack, due to the fact that on a duplicate key I don't want to update anything but rather just return the id value of the row. If you miss this step though, the LAST_INSERT_ID() function returns the wrong value when you're trying to run the "SET ..." statement. Does anyone know of a better way to do this in MySQL? Thank you

  Read the article

• PHP error problem.

  - by TaG

  I get the following error on line 8: Undefined index: real_name which is $privacy_policy = mysqli_real_escape_string($mysqli, $_POST['privacy_policy']); I was wondering how can I fix this problem? Here is the PHP. if (isset($_POST['submitted'])) { $mysqli = mysqli_connect("localhost", "root", "", "sitename"); $dbc = mysqli_query($mysqli,"SELECT users.* FROM users WHERE user_id=3"); $privacy_policy = mysqli_real_escape_string($mysqli, $_POST['privacy_policy']); if (mysqli_num_rows($dbc) == 0) { $mysqli = mysqli_connect("localhost", "root", "", "sitename"); $dbc = mysqli_query($mysqli,"INSERT INTO users (user_id, privacy_policy) VALUES ('$user_id', '$privacy_policy')"); } if ($dbc == TRUE) { $dbc = mysqli_query($mysqli,"UPDATE users SET privacy_policy = '$privacy_policy' WHERE user_id = '$user_id'"); echo '<p class="changes-saved">Your changes have been saved!</p>'; } if (!$dbc) { print mysqli_error($mysqli); return; } } Here is the HTML. <form method="post" action="index.php"> <fieldset> <ul> <li><input type="checkbox" name="privacy_policy" id="privacy_policy" value="yes" <?php if (isset($_POST['privacy_policy'])) { echo 'checked="checked"'; } else if($privacy_policy == "yes") { echo 'checked="checked"'; } ?> /></li> <li><input type="submit" name="submit" value="Save Changes" class="save-button" /> <input type="hidden" name="submitted" value="true" /> <input type="submit" name="submit" value="Preview Changes" class="preview-changes-button" /></li> </ul> </fieldset> </form>

  Read the article

• The instruction at "0x7c910a19" referenced memory at "oxffffffff". The memory could not be "read"

  - by ClareBear

  Hello guys/girls The instruction at "0x7c910a19" referenced memory at "oxffffffff". The memory could not be "read" I have a small issue, I receive the error above before the .vbs terminates. I don't know why this error is thrown. Below is the process of the .vbs file: Call ImportTransactions() Call UpdateTransactions() Function ImportTransactions() Dim objConnection, objCommand, objRecordset, strOracle Dim strSQL, objRecordsetInsert Set objConnection = CreateObject("ADODB.Connection") objConnection.Open "DSN=*****;UID=*****;PWD==*****;" Set objCommand = CreateObject("ADODB.Command") Set objRecordset = CreateObject("ADODB.Recordset") strOracle = "SELECT query here from Oracle database" objCommand.CommandText = strOracle objCommand.CommandType = 1 objCommand.CommandTimeout = 0 Set objCommand.ActiveConnection = objConnection objRecordset.cursorType = 0 objRecordset.cursorlocation = 3 objRecordset.Open objCommand, , 1, 3 If objRecordset.EOF = False Then Do Until objRecordset.EOF = True strSQL = "INSERT query here into SQL database" strSQL = Query(strSQL) Call RunSQL(strSQL, objRecordsetInsert, False, conTimeOut, conServer, conDatabase, conUsername, conPassword) objRecordset.MoveNext Loop End If objRecordset.Close() Set objRecordset = Nothing Set objRecordsetInsert = Nothing End Function Function UpdateTransactions() Dim strSQLUpdateVAT, strSQLUpdateCodes Dim objRecordsetVAT, objRecordsetUpdateCodes strSQLUpdateVAT = "UPDATE query here SET [value:costing output] = ([value:costing output] * -1)" Call RunSQL(strSQLUpdateVAT, objRecordsetVAT, False, conTimeOut, conServer, conDatabase, conUsername, conPassword) strSQLUpdateCodes = "UPDATE query here SET [value:costing output] = ([value:costing output] * -1) different WHERE clause" Call RunSQL(strSQLUpdateCodes, objRecordsetUpdateCodes, False, conTimeOut, conServer, conDatabase, conUsername, conPassword) Set objRecordsetVAT = Nothing Set objRecordsetUpdateCodes = Nothing End Function UDPATE: If I exit the function after I open the connection (see below) it still causes the same error. Function ImportTransactions() Dim objConnection, objCommand, objRecordset, strOracle Dim strSQL, objRecordsetInsert Set objConnection = CreateObject("ADODB.Connection") objConnection.Open "DSN=*****;UID=*****;PWD==*****;" Set objCommand = CreateObject("ADODB.Command") Set objRecordset = CreateObject("ADODB.Recordset") Exit Function End Function It does both the import and update and seems to throw this error after. Thanks in advance for any help, Clare

  Read the article

• Clustered index - multi-part vs single-part index and effects of inserts/deletes

  - by Anssssss

  This question is about what happens with the reorganizing of data in a clustered index when an insert is done. I assume that it should be more expensive to do inserts on a table which has a clustered index than one that does not because reorganizing the data in a clustered index involves changing the physical layout of the data on the disk. I'm not sure how to phrase my question except through an example I came across at work. Assume there is a table (Junk) and there are two queries that are done on the table, the first query searches by Name and the second query searches by Name and Something. As I'm working on the database I discovered that the table has been created with two indexes, one to support each query, like so: --drop table Junk1 CREATE TABLE Junk1 ( Name char(5), Something char(5), WhoCares int ) CREATE CLUSTERED INDEX IX_Name ON Junk1 ( Name ) CREATE NONCLUSTERED INDEX IX_Name_Something ON Junk1 ( Name, Something ) Now when I looked at the two indexes, it seems that IX_Name is redundant since IX_Name_Something can be used by any query that desires to search by Name. So I would eliminate IX_Name and make IX_Name_Something the clustered index instead: --drop table Junk2 CREATE TABLE Junk2 ( Name char(5), Something char(5), WhoCares int ) CREATE CLUSTERED INDEX IX_Name_Something ON Junk2 ( Name, Something ) Someone suggested that the first indexing scheme should be kept since it would result in more efficient inserts/deletes (assume that there is no need to worry about updates for Name and Something). Would that make sense? I think the second indexing method would be better since it means one less index needs to be maintained. I would appreciate any insight into this specific example or directing me to more info on maintenance of clustered indexes.

  Read the article

• Python subprocess: 64 bit windows server PIPE doesn't exist :(

  - by Spaceman1861

  I have a GUI that launches selected python scripts and runs it in cmd next to the gui window. I am able to get my launcher to work on my (windows xp 32 bit) laptop but when I upload it to the server(64bit windows iss7) I am running into some issues. The script runs, to my knowledge but spits back no information into the cmd window. My script is a bit of a Frankenstein that I have hacked and slashed together to get it to work I am fairly certain that this is a very bad example of the subprocess module. Just wondering if i could get a hand :). My question is how do i have to alter my code to work on a 64bit windows server. :) from Tkinter import * import pickle,subprocess,errno,time,sys,os PIPE = subprocess.PIPE if subprocess.mswindows: from win32file import ReadFile, WriteFile from win32pipe import PeekNamedPipe import msvcrt else: import select import fcntl def recv_some(p, t=.1, e=1, tr=5, stderr=0): if tr < 1: tr = 1 x = time.time()+t y = [] r = '' pr = p.recv if stderr: pr = p.recv_err while time.time() < x or r: r = pr() if r is None: if e: raise Exception(message) else: break elif r: y.append(r) else: time.sleep(max((x-time.time())/tr, 0)) return ''.join(y) def send_all(p, data): while len(data): sent = p.send(data) if sent is None: raise Exception(message) data = buffer(data, sent) The code above isn't mine def Run(): print filebox.get(0) location = filebox.get(0) location = location.__str__().replace(listbox.get(ANCHOR).__str__(),"") theTime = time.asctime(time.localtime(time.time())) lastbox.delete(0, END) lastbox.insert(END,theTime) for line in CookieCont: if listbox.get(ANCHOR) in line and len(line) > 4: line[4] = theTime else: "Fill In the rip Details to record the time" if __name__ == '__main__': if sys.platform == 'win32' or sys.platform == 'win64': shell, commands, tail = ('cmd', ('cd "'+location+'"',listbox.get(ANCHOR).__str__()), '\r\n') else: return "Please use contact admin" a = Popen(shell, stdin=PIPE, stdout=PIPE) print recv_some(a) for cmd in commands: send_all(a, cmd + tail) print recv_some(a) send_all(a, 'exit' + tail) print recv_some(a, e=0) The Code above is mine :)

  Read the article

• Google Spreadsheet API problem: memory exceeded

  - by Robbert

  Hi guys, Don't know if anyone has experience with the Google Spreadsheets API or the Zend_GData classes but it's worth a go: When I try to insert a value in a 750 row spreadsheet, it takes ages and then throws an error that my memory limit (which is 128 MB!) was exceeded. I also got this when querying all records of this spreadsheet but this I can imaging because it's quite a lot of data. But why does this happen when inserting a row? That's not too complex, is it? Here's the code I used: public function insertIntoSpreadsheet($username, $password, $spreadSheetId, $data = array()) { $service = Zend_Gdata_Spreadsheets::AUTH_SERVICE_NAME; $client = Zend_Gdata_ClientLogin::getHttpClient($username, $password, $service); $client->setConfig(array( 'timeout' => 240 )); $service = new Zend_Gdata_Spreadsheets($client); if (count($data) == 0) { die("No valid data"); } try { $newEntry = $service->insertRow($data, $spreadSheetId); return true; } catch (Exception $e) { return false; } }

  Read the article

• Global Temporary Table "On commit delete rows" functionality discrepancy.

  - by TomatoSandwich

  I have a global temporary table. I called my GTT, for that was it's initials. My GTT never hurt anyone, and did everything I bade of it. I asked my GTT to delete rows on commit. This is a valid function in the creation script of my GTT in oracle. I wanted to be able to have different users see GTT with their own data, and not the data of other people's sessions. 'Delete rows on commit' worked perfectly in our test environment. GTT and I were happy. But then, I deployed GTT as part of an update to functionality to a client's database. The database doesn't like to play well with GTT. GTT called me up all upset and worried, because it wasn't holding any data any more, and didn't know why. GTT told me that if someone did: insert into my_GTT (description) values ('Happy happy joy joy') he would sing-song back: 1 row inserted. However, if the same person tried select * from my_GTT; GTT didn't know what to do, and he replied 0 rows returned. GTT was upset that he didn't know what his playmate had inserted. Please, Stackoverflow, why would GTT forget what was placed into him? He can remember perfectly well at home, but out in the cold harsh world, he just gets so scared. :(

  Read the article

• Running mysql query using node blocks the whole process and then timesout

  - by lobengula3rd

  I have a node javascript that uses mysql npm (Felix). I have a procedure stored in my DB which I call when the user selects an option to kind of create its own instance of the program. The user chooses for how long he wants that data to be initialized for him. This is suppsoed to be between 1 and 2 years. So if he choose 1 year this query will insert around 20,000 rows into 1 table. If I run this query and a local DB this takes around 30 seconds (I suppose it is reasonable because its a big query which should be done only once in 1 or 2 years so its ok). For some reason my node script freezes as if it can't handle any more calls from other users. The even worse problem is that after like 2 minutes my client ui gets like an error from the server. At this point not all the data that was supposed to enter the DB is entered. After waiting like another minute all the data finally gets to the DB and only then it will accept new requests. This is my connection: this.connection = mysql.createConnection({ host : '********rds.amazonaws.com', user : 'admin', password : '******', database : '*****' }); and this is my query function: this.createCourts = function (req, res, next){ connection.query('CALL filldates("' + req.body['startDate'] + '","' + req.body['endDate'] + '","' + req.body['numOfCourts'] + '","' + req.body['duration'] + '","' + req.body['sundayOpen'] + '","' + req.body['mondayOpen'] + '","' + req.body['tuesdayOpen'] + '","' + req.body['wednesdayOpen'] + '","' + req.body['thursdayOpen'] + '","' + req.body['fridayOpen'] + '","' + req.body['saturdayOpen'] + '","' + req.body['sundayClose'] + '","' + req.body['mondayClose'] + '","' + req.body['tuesdayClose'] + '","' + req.body['wednesdayClose'] + '","' + req.body['thursdayClose'] + '","' + req.body['fridayClose'] + '","' + req.body['saturdayClose'] + '");', function(err){ if (err){ console.log(err); } else return res.send(200); }); }; what am i missing here? as i understand connection.query should by async so why is it actually blocking my node script? thanks.

  Read the article

< Previous Page | 355 356 357 358 359 360 361 362 363 364 365 366  | Next Page >