Search Results

Search found 29437 results on 1178 pages for 'ubuntu membership'.

Page 359/1178 | < Previous Page | 355 356 357 358 359 360 361 362 363 364 365 366  | Next Page >

  • Random flickering on 2.6.32 kernels after suspend

    - by whitequark
    I have XUbuntu 9.10 installed on a Toshiba NB200 netbook with Intel video card that's handled with i915 driver. With 2.6.31 stable, recommended kernel everything but WiFi works fine: Atheros ath9k WiFi shows too small signal power and loses packets in 'bursts' sometimes. With 2.6.32-* (I tested -9 to -11 from Ubuntu's kernel unstable ppa) everything works fine just prior to first suspend: echo mem >/sys/power/state. After it random unidentified fullscreen 'one-frame' flickering begins in Xorg, and after a couple of minutes everything eventually hangs while showing filled grey (not white; it is like default button colour) screen; no X keys are working: Ctrl+Alt+Fn don't, blind typing in console too. Magic SysRq still works and I was able to reboot. Also there is one out-of-tree kernel module called omnibook that is required to turn on WiFi and Bluetooth. Any advices?

    Read the article

  • network configuration busted good

    - by jldupont
    On my Linux Ubuntu Karmic machine, when I try to net conf list I get: [2010/03/14 21:25:18, 0] registry/reg_init_basic.c:32(registry_init_common) Failed to initialize the registry: WERR_ACCESS_DENIED I think I may have busted my networking configuration good this time... I can't get Nautilus "networking" functions to work i.e. the "Places - Network" won't show my Windows workgroup anymore... Please help! note1: I have verified my SAMBA configuration and it isn't the problem. note2: I have uninstalled Winbind, Dnsmasq and Squid to get my configuration as simple as possible to debug.

    Read the article

  • Windows 7 backup network restore: "The network location cannot be reached, 0x800704CF"

    - by Znarkus
    When I try to restore from a backup image, I get this error. After I enter the network address (\\10.0.0.1\backup or \\z\backup), the wizard presents me with the network login dialog, which leads me to believe that it can connect to the network (yes, the share is password protected). I decided to install Windows 7, since I thought that I could restore the image from Windows. The restore process in Windows can locate the backups, but to do an image restore it needs to reboot to the wizard above. Which of course gives the very same error. This is what \\z\backup looks like. Please help, I'm getting desperate. Update: Forgot to mention that the NAS is running Ubuntu, if that's relevant.

    Read the article

  • pgAdmin cannot connect to PostgreSQL 9.1

    - by Nyxynyx
    I am trying to use pgAdmin on Windows to connect to postgresql 9.1.8 running on localhost's Ubuntu 12.04 VM. The host's port 5432 forwards to VM's port 5432. pgAdmin Error: Error connecting to the server: could not receive data from server: Software caused connection abortion (0x00002745/10053) postgresql.conf #------------------------------------------------------------------------------ # CONNECTIONS AND AUTHENTICATION #------------------------------------------------------------------------------ # - Connection Settings - listen_addresses = '*' port = 5432 pg_hba.conf local all postgres peer # TYPE DATABASE USER ADDRESS METHOD host all all 0.0.0.0/0 md5 host all all 127.0.0.1/32 md5 host all all ::1/128 md5 netstat -nlp | 5432 tcp 0 0 127.0.0.1:5432 0.0.0.0:* LISTEN 29035/postgres unix 2 [ ACC ] STREAM LISTENING 50823 29035/postgres /var/run/postgresql/.s.PGSQL.5432 iptables rule iptables -I INPUT -p tcp --dport 5432 -j ACCEPT PostgreSQL service has been restarted and pgAdmin still gives the error. Any ideas what have caused it?

    Read the article

  • Best way to Duplicate a Laptop's Hard Drive One-to-One

    - by Urda
    I have a Lenovo X61 Tablet computer, with a plain SATA drive inside. I have windows 7 and Ubuntu 9.10 dual booting on the computer. I want to back up both of these OS's, and their special partitions (Windows 7 has one, and of course the Linux Swap). I want a one-to-one backup, all of my mission critical data is already backed up, but I would like to get a snapshot, and store it on a larger file server at home for quick recovery. What is the best approach to do this?

    Read the article

  • Why does an error appear every time I try to open the Ubuntu Software Center? [duplicate]

    - by askubuntu7639
    This question already has an answer here: How do I remove a broken software source? 3 answers There is a glitch on the Ubuntu Software Center and whenever I open it an error appears and it keeps loading and never opens. Why does this happen? I have installed Ubuntu 13.04 on a disk and partitioned it. Please help me and ask for excess information if you need it. If you know of any duplicates please show me them!! This is the output of a question someone asked me. SystemError: E:Type '<!DOCTYPE' is not known on line 1 in source list /etc/apt/sources.list.d/medibuntu.list This next output is the output of cat /etc/apt/sources.list.d/medibuntu.list </div> <div style="float:left;"> <div class="textwidget"><script type="text/javascript"><!-- google_ad_client = "ca-pub-2917661377128354"; /* 160X600 Sidebar UX */ google_ad_slot = "9908287444"; google_ad_width = 160; google_ad_height = 600; //-- Recent Comments <article> <div style="float:left; display:block; margin:0 10px 10px 0; border:1px solid #CCCCCC; padding:3px; width:35px; height:35px;"><img alt='' src='http://0.gravatar.com/avatar/ae5f4503d5f167f1cf62d3e36e8242b6?s=35&amp;d=&amp;r=G' class='avatar avatar-35 photo' height='35' width='35' /></div> <div style="float:left;"> <h4 class="author">Richard Syme</h4> <p class="meta"> <time datetime="2013-09-24" pubdate>September 24, 2013</time> | <a class="permalink" href="http://www.unixmen.com/how-to-customize-you-vlc-hot-keys/#comment-13732">#</a> </p> </div> <div class="content" style="float:left;"><p>I dont have a clear button under the hotkeys. All i want to do is get rid of all hotkeys.</p> </article> <article> <div style="float:left; display:block; margin:0 10px 10px 0; border:1px solid #CCCCCC; padding:3px; width:35px; height:35px;"><img alt='' src='http://1.gravatar.com/avatar/ffabde94437e996a506e31e981bcf8fc?s=35&amp;d=&amp;r=G' class='avatar avatar-35 photo' height='35' width='35' /></div> <div style="float:left;"> <h4 class="author">Abin Thomas Mathew</h4> <p class="meta"> <time datetime="2013-09-24" pubdate>September 24, 2013</time> | <a class="permalink" href="http://www.unixmen.com/install-lamp-server-in-centos-6-4-rhel-6-4/#comment-13727">#</a> </p> </div> <div class="content" style="float:left;"><p>Simple and easy to follow tutorial to install and start of phpMyAdmin. Thank you</p> </article> <article> <div style="float:left; display:block; margin:0 10px 10px 0; border:1px solid #CCCCCC; padding:3px; width:35px; height:35px;"><img alt='' src='http://0.gravatar.com/avatar/499ccc1154e9b8569b87413434220b91?s=35&amp;d=&amp;r=G' class='avatar avatar-35 photo' height='35' width='35' /></div> <div style="float:left;"> <h4 class="author">SK</h4> <p class="meta"> <time datetime="2013-09-24" pubdate>September 24, 2013</time> | <a class="permalink" href="http://www.unixmen.com/munich-giving-ubuntu-linux-cds-citizens/#comment-13725">#</a> </p> </div> <div class="content" style="float:left;"><p>I have Bosslinux and i used it for a while. Now i swiched to Ubuntu 13.04.</p> </article> <article> <div style="float:left; display:block; margin:0 10px 10px 0; border:1px solid #CCCCCC; padding:3px; width:35px; height:35px;"><img alt='' src='http://1.gravatar.com/avatar/3dc2f7140bdd857dcdfe815a6e29aa6b?s=35&amp;d=&amp;r=G' class='avatar avatar-35 photo' height='35' width='35' /></div> <div style="float:left;"> <h4 class="author">Anon</h4> <p class="meta"> <time datetime="2013-09-24" pubdate>September 24, 2013</time> | <a class="permalink" href="http://www.unixmen.com/linus-torvalds-talks-backdoor-linuxcon/#comment-13724">#</a> </p> </div> <div class="content" style="float:left;"><p>Do you know how much extra bloat is in Ubuntu these days? How the hell does anyone really know?</p> </article> <article> <div style="float:left; display:block; margin:0 10px 10px 0; border:1px solid #CCCCCC; padding:3px; width:35px; height:35px;"><img alt='' src='http://1.gravatar.com/avatar/9dd28d1cf5efe754fa58b53c1e6de401?s=35&amp;d=&amp;r=G' class='avatar avatar-35 photo' height='35' width='35' /></div> <div style="float:left;"> <h4 class="author"><a href="http://ambitiousgeeks.blogspot.com/" onclick="javascript:_gaq.push(['_trackEvent','outbound-commentauthor','http://ambitiousgeeks.blogspot.com']);" rel='external nofollow' class='url'>Ambition</a></h4> <p class="meta"> <time datetime="2013-09-24" pubdate>September 24, 2013</time> | <a class="permalink" href="http://www.unixmen.com/linus-torvalds-talks-backdoor-linuxcon/#comment-13723">#</a> </p> </div> <div class="content" style="float:left;"><p>True :)</p> </article> </div> <div style="float:left;"> &nbsp;<script type="text/javascript"> window.___gcfg = {lang: 'en-US'}; (function() {var po = document.createElement("script"); po.type = "text/javascript"; po.async = true;po.src = "https://apis.google.com/js/plusone.js"; var s = document.getElementsByTagName("script")[0]; s.parentNode.insertBefore(po, s); })(); <div class="execphpwidget"></div> </div> <div class="module2"> <div class="recentPost"> <h3 class="module-title2">Favorite Links</h3> <ul class='xoxo blogroll'> http://www.iticy.com']);"Cheap Hosting http://www.tuxmachines.org']);"TuxMachines.org http://www.ubuntugeek.com']);"UbuntuGeek.com http://www.stelinuxhost.com']);"Webdesign & SEO </ul> <img src="http://180016988.r.cdn77.net/wp-content/themes/unimax/images/bigLine.jpg" alt="" /> </div> </div> <div align="center" style="min-height:610px;"> <div class="execphpwidget"></div> <div class="textwidget"><a rel="license" href="http://creativecommons.org/licenses/by-nc-nd/3.0/deed.en_US" onclick="javascript:_gaq.push(['_trackEvent','outbound-widget','http://creativecommons.org']);"><img alt="Creative Commons License" style="border-width:0" src="http://i.creativecommons.org/l/by-nc-nd/3.0/88x31.png" /></a><br />This work by <a xmlns:cc="http://creativecommons.org/ns#" href="unixmen.com" property="cc:attributionName" rel="cc:attributionURL">unixmen.com</a> is licensed under a <a rel="license" href="http://creativecommons.org/licenses/by-nc-nd/3.0/deed.en_US" >Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported License</a>.</div> </div> </div> <!-- #primary .widget-area --> </div> Unixmen Archive Select Month September 2013 August 2013 July 2013 June 2013 May 2013 April 2013 March 2013 February 2013 January 2013 December 2012 November 2012 October 2012 September 2012 August 2012 July 2012 June 2012 May 2012 April 2012 March 2012 February 2012 January 2012 December 2011 November 2011 October 2011 September 2011 August 2011 July 2011 June 2011 May 2011 April 2011 March 2011 February 2011 January 2011 December 2010 November 2010 October 2010 September 2010 August 2010 July 2010 June 2010 May 2010 April 2010 March 2010 February 2010 January 2010 December 2009 November 2009 October 2009 September 2009 August 2009 July 2009 June 2009 May 2009 April 2009 March 2009 February 2009 January 2009 December 2008 Tags Cloudandroid apache browser Centos chrome command line Debian eyecandy Fedora firefox games gaming gnome google karmic koala kde libreoffice Linux linux distribution LinuxMint lucid lynx maverick meerkat mysql news oneiric ocelot openoffice opensource opensuse oracle ppa Precise Pangolin release RHEL security server software themes tools ubuntu unix upgrade virtualbox vlc windows wine Unixmen Twitts Firefox 16, a treat for developers http://t.co/cnd27CzT Ubuntu 12.10 ‘Quantal Quetzal’: Beta 2 Sneak Peek http://t.co/hd4LwDOy Top 5 security Myths about Linux; and their realities http://t.co/zO1LgHST About Us Advertising Sitemap Privacy Contact Us Hire Us Copyright © 2008-2013 Unixmen.com . Maintained by Unixmen . /* */ jQuery(document).on('ready post-load', easy_fancybox_handler ); http://www.w3-edge.com/wordpress-plugins/ Page Caching using apc Database Caching 3/186 queries in 0.035 seconds using apc Content Delivery Network via 180016988.r.cdn77.net Served from: www.unixmen.com @ 2013-09-25 01:38:14 by W3 Total Cache

    Read the article

  • how to find a text string which may be present in some unknown file in entire filesystem

    - by Registered User
    I am stuck up with a problem I have a line 'something' in some file. In which file is this line that I have forgotten. In the entire root file system I would like to find out which file and where is this line. So how can I go for this.I have used find but when I used find then I knew the name of file in this case I do not know name of file also. It is a Ubuntu server 10.04 So what can I do to find out which file has this string.

    Read the article

  • Unable to see a newly added virtual disk in Virtualbox

    - by uswaretech
    I am using virtualbox with Host: Ubuntu 9.10 Guest Win 7 My old virtual disk was filing up so I added a new virtual disk. After I restarted the guest, I can not see it in the My computer. I can see a new disk in the device manager though. The new disk was added as primary slave. What do I need to do to see it? I am guess I need to format the new virtual disk, but since I dont see any drive letter mapped to it, I am not sure of how to do this.

    Read the article

  • Windows clients not using NTP server provided via DHCP

    - by gencha
    I have a network consisting mostly of Windows Vista and 7 clients and an Ubuntu server. The server provides both the DHCP and NTP services through dhcp3-server and openntpd. In my dhcpd.conf, the subnet is declared as follows: subnet 10.10.10.0 netmask 255.255.255.0 { range 10.10.10.10 10.10.10.200; option broadcast-address 10.10.10.255; option routers 10.10.10.1; option ntp-servers 10.10.10.1; } The clients don't seem to be using the NTP server though. When I capture the network traffic with Wireshark during the DHCP process, I also see no mention of the NTP option in the DHCP offer message. I am not quite sure if the clients would have to specifically request that option to receive it or if I have to make another configuration to offer the option.

    Read the article

  • Turn off tap-to-select on IBM UltraNav keyboard

    - by gworley3
    I have an IBM UltraNav USB keyboard with a trackpoint and a touchpad. Using xinput I've gotten a number of things working how I would like, but I've got one remaining problem. I can't find a way to turn off tap-to-select on the touchpad. I've searched around and everyone describes how to do it using the synaptics driver, but for some reason I can't seem to get this installed and working correctly on my Ubuntu 10.04 install. What can I do to turn this feature off without having synaptics? I'm about to lose my mind from all the accidental clicks.

    Read the article

  • Is there any reason to install software as root as opposed to sudo installing software as a sudoer?

    - by Tchalvak
    I'm setting up a new server running Ubuntu Server Edition, and I'm not certain what the difference would be between installing most of the basic software as root, vs installing the basic software as an admin user using sudo apt-get install . For one thing, I'm not sure whether after installing the software as root, I'll need sudo access when running the software as a user (e.g. if I install git as root). On the other hand, if I install software as a user, I could conceive of it not being available to other users that I create in the future. What's the best practice here?

    Read the article

  • HOWTO run Wordpress site along with Tomcat web aplication on the same server

    - by Chantz
    I am building a solution where the CMS part of the site (i.e. About US, Contact etc) will be run on Wordpress & the private pages will be a Java-Servlet based stack run on Tomcat 7. Both of these "apps" have to run on the same server for budget reasons, at least for now. What I want to know how to make this happen (via configurations, setups etc)? So that whenever users come to public pages they will be served content from Wordpress but for private pages (here I am assuming there will be a URL pattern differentiating this) then it will be served by Tomcat I am assuming here that I will be using Apache as the server for fronting the wordpress requests. Also it is an Ubuntu 12.04 server.

    Read the article

  • Error "fileid changed" when accessing files over NFS

    - by Roman Prikhodchenko
    I have an nfs-kernel-server configured and running on Ubuntu 10.04 Server. /export THIRD_SERVER_IP(rw,fsid=0,insecure,no_subtree_check,async) SECOND_SERVER_IP(rw,fsid=0,insecure,no_subtree_check,async) /export/ebs THIRD_SERVER_IP(rw,fsid=0,insecure,no_subtree_check,async) SECOND_SERVER_IP(rw,nohide,insecure,no_subtree_check,async) I mounted the exported folder to the second server: mount -t nfs4 -o proto=tcp,port=2049 NFS_SERVER_IP_HERE:/ebs /ebs and it works just fine. I mounted it to the third server but I cannot access files from it. ls -l /ebs ls: reading directory /ebs: Stale NFS file handle total 0 The syslog on the third server says: kernel: [11575.483720] NFS: server NFS_SERVER_IP_HERE error: fileid changed kernel: [11575.483722] fsid 0:14: expected fileid 0x2, got 0x6e001 Some info: uname -r 2.6.32-312-ec2 uname -m i686

    Read the article

  • Missing NFS service link?

    - by Recc
    # ps ax | grep nfs 1108 ?        S<     0:00 [nfsd4] 1109 ?        S<     0:00 [nfsd4_callbacks] 1110 ?        S      0:00 [nfsd] 1111 ?        S      0:00 [nfsd] 1112 ?        S      0:00 [nfsd] 1113 ?        S      0:00 [nfsd] 1114 ?        S      0:00 [nfsd] 1115 ?        S      0:00 [nfsd] 1116 ?        S      0:00 [nfsd] 1117 ?        S      0:00 [nfsd] 4437 ?        S<     0:00 [nfsiod] 16799 ?        S      0:00 [nfsv4.0-svc] 18091 pts/1    S+     0:00 grep nfs But # service nfs status nfs: unrecognized service That'll be on Ubuntu 11.04 am I missing a sym link or something? How can I fix this quickly?

    Read the article

  • How safe is locking the screen?

    - by D Connors
    So, both windows and linux have a pretty useful feature that allows you to leave everything running on the PC while also keeping invaders away by locking the screen. My question is: Say I leave my laptop with the screen locked while I go get a donnut, and then it gets stolen. Assuming the thief has access to whatever software he needs, how easy/hard would it be for him to access my (currently logged-in) account? Now let me be clear. I'm not asking if he can access the data on the harddrive. I know he can, and that issue would go under data encryption, which is not my question here. I'm focusing on how hard would it be to get around the "Insert Password" screen, and have full access to my account. I'm looking for answers regarding both OS's; but, if needed, assume Ubuntu. Thank you.

    Read the article

  • Firefox or Chrome - how to force a specific encoding for a page

    - by Mike
    Hi, I am accessing an intranet site built by amateurs, that was constructed to be "best viewed by IE" (arghhh!). The site is in portuguese. All accented letters are jammed and do not appear as they should. As I create sites myself, I know that the best way to build a site in portuguese and other latin languages is to use the "charset=iso-8859-1" on the page's HTML encoding. This will ensure cross-browser and platforms compatibility. But I have no way to change this, because I am a visitor on this site. I don't know the encoding they are using. What I ask is: is there a way I can force my browser (Chrome or Firefox) to recode the page using the correct charset? I need this to work on Ubuntu.

    Read the article

  • How can I secure Postgres for remote access when not in a private network?

    - by orokusaki
    I have a database server on a VMWare VM (Ubuntu 12.04.1 LTS server), and it just occurred to me that the server is accessible via the web, since the same physical server contains a VM that hosts public websites. My iptables in the database are such that only SSH traffic, loopback traffic, and TCP on port 5432 are allowed. I will only allow host access to the Postgres server from the IP of the other VM on the same physical machine. Does this seem sufficient for security, assuming there aren't gaping holes in my general OS configuration, or is Postgres one of those services that should never be web facing, (assuming there are some of "those"). Will I need to use hostssl instead of host in my pg_hba.conf, even though the data will travel only on my own network, presumably?

    Read the article

  • My (C:) drive changed from Basic to Dynamic, is this bad?

    - by bbman225
    I'm really worried here. My computer still runs, so I take this as a good sign, however let me explain my situation: I am trying to install Ubuntu Linux, and the installer was having problems, so I went back into the partitioning tool on my Windows 7 (after having successfully shrunken my C drive and created 55 GB unallocated space) and I attempted to create a new partition out of the 55 GB and make it a simple NTFS drive so that I could let the installer wipe it clean again and format it in whatever file system it prefers. Now, after googling it and running through the process I noticed that all of my drives, including the C drive and the one I just made changed from type "Basic" to type "Dynamic." What is a dynamic drive and should I be worried?

    Read the article

  • How do I configure an ordinary TV remote control to work with lirc on Linux?

    - by Allan Lewis
    I am running MythTV on Ubuntu 9.10 and I would like to use a TV remote to control it. I know that lirc needs a configuration file for the remote, but none of my remotes is in the official database. If I point a remote at the receiver on my TV card (a Pinnacle PCTV "Solo", model 72e) and press a button, dmesg logs the code generated by the remote, so I assume I just have to make a config file with a list of commands assigned to these codes. I've read a few how-tos but I still don't understand exactly how to create the config file. Some of the guides I've read refer to IR receivers on TV cards working at a "higher level of abstraction", which I take to mean that they decode the signal and provide a code, like the ones I can see in dmesg, rather than just giving raw data, but none of them explain where to go from there! Any help would be greatly appreciated!

    Read the article

  • Clear scr does not work

    - by idea_
    I haven't been able to use the "clear scr" command in a while, as I get the following error: root@server:~# clear The program 'clear' is currently not installed. You can install it by typing: apt-get install ncurses-bin bash: clear: command not found root@server:~# apt-get install ncurses-bin Reading package lists... Done Building dependency tree Reading state information... Done ncurses-bin is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I'm using Ubuntu Server 9.10. I did some development with the ncurses library a while ago, so I've no doubt broken something.

    Read the article

  • Why am I getting this SVN can't move .svn/tmp/x to trunk/x error?

    - by Alex Waters
    I am trying to checkout into the virtualbox shared folder with svn 1.7 in ubuntu 12.04 running as a guest on a windows 7 host. I had read that this error was a 1.6 problem, and updated - but am still receiving the error: svn: E000071: Can't move '/mnt/hostShare/code/www/.svn/tmp/svn-hsOG5X' to '/mnt/hostShare/code/www/trunk/statement.aspx?d=201108': Protocol error I found this blog post about the same error in a mac environment, but am finding that changing the folder/file permissions does nothing. vim .svn/entires just has the number 12 - does this need to be changed? Thank you for any assistance! (just another reason for why I prefer git...)

    Read the article

  • How can I permanently fix my date synchronize problem in linux?

    - by gr33d
    Ubuntu 7.10 server i386 clock/date/time won't stay in sync. Are their log files I can view to tell when the clock changes? For a temporary fix, I created a file in /etc/cron.hourly: #!/bin/sh ntpdate time.nist.gov However, this still leaves a potential hour of unchecked time. Is there a cron.minutely? That would still leave a potential minute of unchecked time. I have read about CMOS battery problems, but what if this does not fix it? I'd like to be able to troubleshoot this as a completely software problem. My squid logs are showing dates back in 2005 when the clock changes, and my time-sensitive access controls are skewed and end up allowing users to surf prohibited websites during business hours.

    Read the article

  • Fax Receiving Software

    - by Josh Curren
    I am looking for a Fax receiving program. My company receives about 100 faxes a week. We get many junk faxes that we dont want to waste ink and paper for and we get many faxes that we would like stored electronically for archival purposes. Currently we are using Windows Fax console on XP. This has worked fairly well but has a lot of Failed Faxes when receiving (we dont use it for sending). Does anyone know a free or cheep Fax service for Windows XP or for Ubuntu? We dont want a web based fax service.

    Read the article

  • How can I make sftp accounts that can only access their home directory?

    - by LonnieBest
    I'm using Ubuntu Server 9.10. I need to setup 6 accounts for users that will exclusively need sftp. When the user logs in, I need them to only have access to their home directory. I don't want them to be able to navigate to any other places in the file system. I need their ability to type commands to be limited to only the commands needed to view and transfer files back and forth to their home directory. Can anyone offer some guidance on setting thing up this way?

    Read the article

  • Munin does not show Apache/mySQL stats in web view

    - by Chris
    I'm facing a very strange Problem. I just set up Munin on a fresh Ubuntu slice with a common LAMP Stack. Everything works great, except that Munin does just not show the Apache/mySQL stats in the web view. Everything else in the web view works great, Apache works, mySQL works. I even tried calling the plugins via console: sudo munin-run apache_accesses And it works fine. AFAIK Munin log files are not telling me any problems.. My only hint: when I run munin-run without sudo it gives me a "Permission denied" - could this be the problem?

    Read the article

< Previous Page | 355 356 357 358 359 360 361 362 363 364 365 366  | Next Page >