Search Results

Search found 8185 results on 328 pages for 'capture card'.

Page 36/328 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

  • Recovering a damaged microSDHC

    - by djechelon
    I just bought from eBay a Kingston 32GB microSDHC that was advertised as defective. The seller said that there could be formatting problems or with transfer of large files. Unfortunately, when I got it, it was a total mess. My Nikon camera doesn't read it at all (OK, maybe it doesn't support 32GB) My Linux laptop doesn't mount it: can't read superblock The same laptop refuses to mkfs.msdos because it failed whilst writing reserved sector The same laptop, under Windows, doesn't read nor format the card HTC HD2 mounts the MMC, allows me to write via USB, but is unable to open the just written files OK, folks, now you would say I would have to go through Paypal complaint... that's not that easy. I consciously bought a half-price card that was known to show some defects, and Paypal complaints take time. Obviously, I can't accept somebody sold me a completely use-less computer decoration. So I'll keep it as last option. My question is Do you know a way, under either Linux or Windows, to thoroughly scan, test and possibly repair memory cards, even if I have to lose some percentage of space because of bad sectors? If I can keep at least half of the card intact it would certainly be fine. I used to do broken sector marking with hard disks in the past. I almost forgot: MONSTR:/home/djechelon # fsck /dev/mmcblk0p1 fsck from util-linux-ng 2.17.2 dosfsck 3.0.9, 31 Jan 2010, FAT32, LFN Read 512 bytes at 0:Input/output error

    Read the article

  • Expanding to dual video cards

    - by Anthony Greco
    I know a lot of factors can go into play here, so I will list my current hardware and setup: MOBO: GIGABYTE GA-890FXA-UD5 [http://www.newegg.com/Product/Product.aspx?Item=N82E16813128441] Processor: AMD Phenom II X6 1090T Black Edition Thuban 3.2GHz [http://www.newegg.com/Product/Product.aspx?Item=N82E16819103849] Ram: G.SKILL Ripjaws Series 16GB (4 x 4GB) [https://secure.newegg.com/NewMyAccount/OrderHistory.aspx?RandomID=4933910872745320111128011418] Current video card: EVGA 01G-P3-1366-TR GeForce GTX 460 SE [http://www.newegg.com/Product/Product.aspx?Item=N82E16814130591] OS: Windows 7 Ultimate x64 Currently I can run 2 monitors just fine in my setup. However, I want to upgrade this to 4 monitors. My question is, what is the best way to do this? I remember in the past reading I need the same type of video card, however would any GeForce GTX work, or do i need that very specific model (EVGA 01G-P3-1366-TR GeForce GTX 460 SE)? Are there any issues I should be aware of before I order 2 new monitors and a video card? Are there video cards better setup for this? I know NVidia offers SLI, however I do not know if my mobo is compliant. My mobo also offers CrossFireX configuration, though from what it says only Radeon are compliant. Any suggestions / feedbacks on my best route with my current setup is appreciated. Even if you suggest buying 2 new identical video cards, as long as you can mention which and why that is better I really appreciate it. Note: I really do not do any gaming. I sometimes do some 3D work in Unity and very rarely in Maya. Besides that I mostly do all my computer work in Visual Studios and Photoshop. I however need the 2 extra monitors because I monitor sometimes 5 remote desktops at once and switching on only 2 is becoming a very big pain. Also seeing 3 side by side while I work on the 4th will be very helpful. Again, I appreciate any feedback, as I have googled a bunch and just want to make sure what I buy will work.

    Read the article

  • How can I get Windows 7 to work with two Nvidia graphics cards with different drivers?

    - by Max
    This is similar to this question, but I am using more similar cards with Windows 7. I just purchased a Zotac Nvidia GeForce 7200 GS. I have a motherboard with two PCI Express x16 slots. There is already an MSI Nvidia GeForce 8800 GTS being used as the primary card, driving two LCD monitors. I would like the Zotac to output to a TV via DVI-out. Unfortunately, when Windows detects the Zotac and installs its drivers, or I manually install them, Windows stops being able to boot up. If I remove them and re-install the MSI 8800 drivers, I can boot again, but Windows can no longer see the Zotac 7200--it shows up as a yellow triangle in Device Manager. I've read conflicting reports about this. Some people claim that Windows 7 will support multiple heterogeneous graphics card drivers, as long as they are all using the same driver API ("WDDM?"). Others say that they have to be using the exact same driver, or it won't work. Others claim that you have to use the exact same card. which is it, exactly? I know I can run the MSI 8800 in SLI if I purchase another, but I don't need that kind of power--I just need HD-out to my television. I read somewhere that running two cards in SLI precludes you from using 100% of their output ports, so I'm not sure if that's an option. I suppose I could also run two MSI 8800's without SLI, but again, that's more power than I need (and more money than I'd like to spend). Also, I don't think this exact model is even manufactured anymore. Any ideas?

    Read the article

  • ATI firepro will not detect a second DVI-D monitor

    - by John
    OK so weird issue here. I have previously been running 6 screens off of 3 of the older ATI firepro graphics cards but they had a problem with the heat sink getting too hot and warping the PCB resulting in total failure of the card, to replace my three dead cards I purchased a new-type ATI firepro with the newer heat sink design. I'm only using one at the moment to make sure they've fixed the problem before I waste more money on 2 more cards but this is where things start to get weird. The Firepro's only have one port on them, they connect to two monitors via a splitter cable going from the one port to two DVI connectors for the screens. When I plug two identical monitors in via their DVI inputs not matter what I do windows and Catalyst will only detect one screen. However if I use the VGA input on one of the screens with a VGA - DVI adaptor to plug it in to the card it works fine. This confuses me greatly. I'm currently using the ATI Firepro 2270 Graphics card with identical DELL U2311H screens. I can post the rest of the system spec as well if needed but I wouldn't have thought it would make much difference as it had no problem handling 6 screens before the graphics cards failed. Naturally both catalyst and ATI drivers are the most current version. ATI tech support has been absolutely zero help, they seemed to get stumped as soon as I verified that both screens were plugged in and connected properly. Anyone have any ideas?

    Read the article

  • Hearing a clicking noise from soundcard all the time

    - by Mehrdad
    I have installed Fedora 17 on my laptop. A few days ago I updated my fedora (but not upgraded). I shut down my computer and since the next time I turned it on I am hearing a clicking noise all the time from speakers. Even when I plug my headphones in I hear the noise through the headphone. I surfed over the internet and found the following shell commands: su -c 'echo "options snd_hda_intel power_save=0" /etc/modprobe.d/snd_hda_intel.conf' su -c 'echo 0 /sys/module/snd_hda_intel/parameters/power_save' I tried them but they didn't work. Here is the part of "lspci" command related to my sound-card: 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) I have to add that my sound-card is working and I can play some audio file, I mean I can hear the voice and noise simultaneously. But everything is OK in windows xp which is also installed on my laptop. Could it be related to the sound-card driver? If so, how can I revert it to the previous version?

    Read the article

  • What sound cards are there besides Creative's that offer benefits for gaming?

    - by Vilx-
    Many years (6? 7?) ago I bought an Audigy sound card to replace the onboard sound and was astonished at the improvement in games. It was a completely different sound, the whole experience became way more immersive. As the time has passed however the card has become old. The support for the latest Windows versions is declining and newer technologies have definitely been developed. So I was starting to wonder - what newer hardware exists? Sure, there is the Sound Blaster X-Fi, but that's quite expensive and I'm not entirely thrilled by past policies of Creative either (like the whole affair with Daniel_K). But are there any alternatives? EAX is a patent by Creative, so it's doubtful that any other manufacturer has implemented it. And I haven't heard of any competing standards either. To clarify, what I would like is something like a "sound accelerator". A sound card that would offload sound processing from my CPU while at the same time giving astounding effects that would be impractical to do on CPU in the first place. I'm not interested in absurd sampling rates (for the most time I can't tell MP3 and a CD apart) or uncountable channels (I'm using stereo headphones). But I am interested in special effects in games. Are there any alternatives or is Creative a monopoly in this market?

    Read the article

  • Windows 7 x64 support for Intel GMA 3650 (or GMA 3600)

    - by Loom
    I recently purchased an Intel D2700 MUD motherboard and I cannot find drivers for the Win7 x64 integrated graphics (Intel GMA 3650 aka PowerVR sgs545). The accompanying CD contains Win7 x32 version only. When I run it I got an error: This computer does not meet the minimum requirements for installing the software. I tried to use online utility Intel Driver Update Utility Graphics. I used Chrome, Firefox, Internet Explorer without success. First, UAC prompt appear, and then endlessly spinning progress-bar with text "Analyzing computer...". The text in UAC prompt is: Program file name: System Requirements Lab Verified publisher: Husdawg, LLC I downloaded this utility (intel_srldetect_4.5.5.0) and started it from my hard disk. I got an error: A network error occured while attempting to read from the file: C:\Users\Loom\Downloads\SystemRequirementsLab_intel_4.5.5.0.msi Standard VGA driver works for this video card but without hardware acceleration: Hardware acceleration is either disabled or not supported by your video card driver, which could slow game performance. Make sure you have the latest video card driver installed and that hardware acceleration is turned on. Where I can get appropriate driver?

    Read the article

  • Graphics artifacts/distortion with Win7 and nVidia

    - by Gepard
    Problem I encounter is rather hard to describe, so I provide a screenshot: http://dl.dropbox.com/u/1732760/video-distortion.png As you can see there are some horizontal stripes in random colors. These stripes appear sometimes in all windowed apps, games and on the desktop too. They tend to stay in place until I refresh window (or force it to to redraw by for example minimizing and maximizing again). They also tend to appear in the same place and shape multiple times, even if they disappear, it's very likely they will be again in the same place after a while. These artifacts do not blink or change if computer is idling. If I don't touch anything, do not use mouse, they will stay in place forever (unless some app redraws its window on its own). I first encountered this problem some weeks ago. Back then I thought it might be cooling problem, so I took out the graphics card, removed dust from the radiator and fan and put it into PC back. I also ran some stress test using Furmark (peak tempearature was ~65C) to see if the problem becomes more intense if the card gets hotter, but suprisingly no artifacts whatsoever appear during the stress test. Graphic card is Galaxy GeForce 7300 GT with DDR3 memory, was never overclocked. Drivers are the latest, from Nvidia site. OS is Windows 7 64-bit, updated. AMD64 3000+, 2GB RAM. I'm running a dual monitor setup with 2 19'' Samsung LCDs and problem is on both, so I assume it's not a monitor or cable issue.

    Read the article

  • computer randomly restarting. both in game and out of game

    - by eric
    first my specs are. AMD Phenom II x4 955 processor 3.2ghz 20gb ddr3 ram 4Gb Nvidia Geforce GTX 770 850w Corsair tx850w psu Gigabyte ud3 mobo Windows 7 professional I recently uprgraded my vid card to gtx770 and upgraded my psu to the 850w thats in it now. i did a reformat with the installation of the new gpu and psu and started fresh and only have a couple programs installed (diablo3, nvidia control panel, wow, and steam). all drivers are up to date and everything is hooked up correctly. the problem is it will randomly shut down. no blue screen. just turns itself straight off and reboots after a couple seconds. occasionally i will have to unplug the power cable from the psu for a few minutes then reconnect and it will start up. it seems pretty random. sometimes it does it when my pc is just sitting there on the home screen. and sometimes it does it during games. and sometimes it doesnt do it for days at a time. i noticed the psu felt hot so i put an extra fan blowing straight onto both the psu and gpu and neither feel overly hot after it shuts down now. could it just be that it is a psu problem. the psu was taken from another machine but wasnt having this problem in that machine. i have seen a few articles online about gtx770 doing the same thing. but i havent found any answers or solutions. any help will be appreciated. im sure the 850w is enough to power my machine, im just stumped and ran out of ideas to fix it. i have even returned the video card for another thinking it might have been an issue with that particular card, but still gettin the same problem.

    Read the article

  • Computer makes odd noise. Replace almost every component. Computer still makes odd noise.

    - by ShimmerGeek
    My PC was getting pretty old, 5 years or so, and over the course of it's life I replaced the graphics card, HDD and a couple of sticks of RAM; but the PSU, processor, motherboard, fans etc. were all original. A few weeks ago, I started hearing an odd noise. I struggle to describe it, it sounded sortof like the 'click of death' you hear when a HDD may fail, but not quite... (And it was far less irregular) Also, I was sure I heard it once or twice a minute or two after I shut down the PC. This was going on very irregularly for a couple weeks. Some days I would hear no noise at all, others I would hear it often, maybe once every 30 seconds or so. I could find no common denominator - i.e. it did not happen more during gaming or any other intensive use. Anyway, I need my PC to sit some classes over the summer, so I put it in for them to run a HDD stress test and to replace a bunch of the components. I ended up replacing almost everything - the only elements I still have are my blu-ray drive and graphics card. They said when they started to run the HDD stress test it failed instantly (They started the test and it immediately said 'Test Complete' so they assumed it was at fault, and put a new HDD in since I was still under warranty with them.) I took it home a few hours ago, and I am still hearing the noise!!! Do you guys have any theories? I'm getting a little worried, I can't afford for my PC to suddenly fail during the next month - I have a lot of coursework to do. Any thoughts? Is it possible it could be the fan on the graphics card? I'm confused because it's so irregular. Any help would be much appreciated.

    Read the article

  • How do I get a CardScan 60 II working with SANE?

    - by TiuTalk
    I have a CardScan 60 II device and installed SANE in my Ubuntu 10.10 laptop. The problem is I can't make scanimage find the device. Quote: $ sudo sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. found USB scanner (vendor=0x08f0 [Corex Technologies Corporation], product=0x1000 [Corex CardScan 60], chip=LM9832/3) at libusb:006:002 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. But I can't find the device: $ sudo scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).

    Read the article

  • Capturing wireless traffic (using Wireshark).

    - by Daisetsu
    When I run wireshark on a wired network it works fine and reports all of the packets. When I run it on a wireless network though I only see my own traffic. The wireless card I have is supposed to support packet capture and go into premiscous mode, but I don't see any other system traffic. What is wrong?

    Read the article

  • Capturing wirelss traffic (using Wireshark).

    - by Daisetsu
    When I run wireshark on a wired network it works fine and reports all of the packets. When I run it on a wireless network though I only see my own traffic. The wireless card I have is supposed to support packet capture and go into premiscous mode, but I don't see any other system traffic. What is wrong?

    Read the article

  • Can somebody guide me asto how I can make a game for playing cards [closed]

    - by user2558
    In college me and my friends use to play cards all the time. I want to make a game for that. It's quite similar to hearts, a kind of modified hearts which we made up. I want to make a multiplayer game which could be played over the internet. Plus there should also be an option for computer to play if less players availiable at the time. I don't want to make a exe. I want to play in browser. How should I go about it.

    Read the article

  • Kingston SD reader not working for USB3

    - by user1146334
    I have a Kingston 4-in-1 Multimedia reader. When my PC was formatted with Win7 it worked fine. I decided to change to Ubuntu 14.04 and now it doesn't work. If I plug it into one of the USB2 ports it works fine, but whenever I plug it into one of the USB3 ports, it thinks about it for a minute and then dies. Here's the output of dmesg when it dies [110262.148656] usb 4-1: new SuperSpeed USB device number 3 using xhci_hcd [110262.170330] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [110262.266379] usb 4-1: New USB device found, idVendor=11b0, idProduct=6348 [110262.266386] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [110262.266390] usb 4-1: Product: USB3.0 Media Reader [110262.266394] usb 4-1: Manufacturer: Kingston [110262.266398] usb 4-1: SerialNumber: 08735314400198 [110262.272929] usb-storage 4-1:1.0: USB Mass Storage device detected [110262.273239] scsi15 : usb-storage 4-1:1.0 [110263.290056] scsi 15:0:0:0: Direct-Access FCR-HS3 -0 1.00 PQ: 0 ANSI: 4 [110263.306622] scsi 15:0:0:1: Direct-Access FCR-HS3 -1 1.00 PQ: 0 ANSI: 4 [110263.323292] scsi 15:0:0:2: Direct-Access FCR-HS3 -2 1.00 PQ: 0 ANSI: 4 [110263.339858] scsi 15:0:0:3: Direct-Access FCR-HS3 -3 1.00 PQ: 0 ANSI: 4 [110263.340332] sd 15:0:0:0: Attached scsi generic sg3 type 0 [110263.340706] sd 15:0:0:1: Attached scsi generic sg4 type 0 [110263.340850] sd 15:0:0:2: Attached scsi generic sg5 type 0 [110263.340975] sd 15:0:0:3: Attached scsi generic sg6 type 0 [110264.651847] sd 15:0:0:1: [sde] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB) [110264.667049] sd 15:0:0:1: [sde] Write Protect is off [110264.667055] sd 15:0:0:1: [sde] Mode Sense: 2f 00 00 00 [110264.682767] sd 15:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [110264.694975] sd 15:0:0:2: [sdf] Attached SCSI removable disk [110264.697933] sd 15:0:0:3: [sdg] Attached SCSI removable disk [110264.729918] sd 15:0:0:0: [sdd] Attached SCSI removable disk [110264.754189] sde: sde1 [110264.760114] sd 15:0:0:1: [sde] Attached SCSI removable disk [110275.377368] usb 4-1: reset SuperSpeed USB device number 3 using xhci_hcd [110275.398453] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [110275.436592] xhci_hcd 0000:05:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802e4fb9980 [110275.436600] xhci_hcd 0000:05:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802e4fb99c0 [110277.263444] usb 4-1: USB disconnect, device number 3

    Read the article

  • Any free Skype Video Recorder?

    - by Rogue
    Are there any free full featured video recorders for Skype? I have seen SuperTinTin video recorder but that limits the amount I can capture and then i have to buy the software, but I'm looking for a free video recorder something on the lines of SuperTinTin. I'm using Windows, thanks in advance

    Read the article

  • Wrapping up an Exciting Mobile World Congress

    - by Jacob Lehrbaum
    Its been a busy week here in Barcelona, with noticeably more energy at the show than in 2010. This year, we decided to move the Java booth to the App Planet and really engage with the increasing number of developers that are attending the event. Our booth featured 10 demos and a series of nearly 25 workshops featuring a variety of topics ranging from information about Java Verified, to the use of web technologies with Java ME, to sessions hosted by Operators such as Orange and Telefonica (see image to the left).One of the more popular topics in our booth was the use of Java in the Smart Grid. In our booth we were showing off some of the work of the Hydra Consortium whose goal it is to leverage the emerging smart grid infrastructure to securely enable the delivery of personal health data (weight, blood pressure, etc) from the home to your doctor. If you'd like to learn more about this innovative project, you can watch a video that was filmed at the event featuring Charles Palmer of Onzo. If you'd like to learn more about Java in the Smart Grid, check out our on-demand webinar

    Read the article

  • Problem with SANE and CardScan

    - by TiuTalk
    I have a CardScan 60 II device and installed SANE in my Ubuntu 10.10 laptop. The problem is I can't make scanimage find the device. Quote: $ sudo sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. found USB scanner (vendor=0x08f0 [Corex Technologies Corporation], product=0x1000 [Corex CardScan 60], chip=LM9832/3) at libusb:006:002 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. But I can't find the device: $ sudo scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).

    Read the article

  • Problems, connecting Android ICS to Ubuntu using MTP

    - by ubuntico
    I've followed this tutorial from this blog which very clearly explains how to connect Android phone with ICS to Ubuntu so that one can access phone's sdcard (MTP access). I passed all the procedure with no errors, I can event attach my mobile to ubuntu via mtpfs -o allow_other ~/Android/GalaxyS2 and disconnect via fusermount -u ~/Android/GalaxyS2 The problem comes when I try to access mounted directory. If I try to do it via Nautilus, the system tries to open the folder for a couple of minutes and then, I either see the error, or the folder disappears from Nautilus (it comes back when I disconnect the path). I also get a console error: fuse: bad mount point `~/Android/GalaxyS2': Transport endpoint is not connected I see many people on the net reporting this error, but noone offers any solution to it. I use Ubuntu 11.10 with Gnome Shell (Gnome 3) and the mobile is Samsung Galaxy S II. I am in the fuse list, I did all the steps in the tutorial for dozens of times, all in vain.

    Read the article

  • Webcam error (libv4lconvert) while capturing VIDEO

    - by shadyabhi
    I get the following when I capture images using my web-cam.. libv4lconvert: Error decompressing JPEG: unknown huffman code: 0000ffff libv4lconvert: Error decompressing JPEG: unknown huffman code: 0000ffff libv4lconvert: Error decompressing JPEG: unknown huffman code: 0000ffff ...(same error repeating) ... I also had issue that my camera was not getting detected in ubuntu. So, in order to run an application that uses the webcam, I have to run a command like LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so ./6dofhand Whats causing these errors?

    Read the article

  • Best way to implement an AI for Dominion? [on hold]

    - by j will
    I'm creating a desktop client and server backend for the game, Dominion, by Donald X. Vaccarino. I've been reading up on AI techniques and algorithms and I just wanted to what is the best way to implement an AI for such a game? Would it better to look at neural networks, genetic algorithms, decision trees, fuzzy logic, or any other methodology? For those who do not know how Dominion works, check out this part of the wikipedia article: http://en.wikipedia.org/wiki/Dominion_(card_game)#Gameplay

    Read the article

  • How to change the "record external input" in Fraps?

    - by CyanPrime
    I'm using a TV to USB capture thingy called Hauppauge USB-Live2 (http://www.hauppauge.com/site/products/data_usblive2.html) and I'm using Media Player Classic Home Cinema to view my device's output, and finally I'm using Fraps to record the output off of MPC. It all works nicely except I can't get my mic to record, or even show up in the "Record External Input" area of Fraps while my Hauppauge is plugged in. My question is: How can I select my mic as the "record external input" in fraps?

    Read the article

  • Cryptography for P2P card game

    - by zephyr
    I'm considering writing a computer adaptation of a semi-popular card game. I'd like to make it function without a central server, and I'm trying to come up with a scheme that will make cheating impossible without having to trust the client. The basic problem as I see it is that each player has a several piles of cards (draw deck, current hand and discard deck). It must be impossible for either player to alter the composition of these piles except when allowed by the game rules (ie drawing or discarding cards), nor should players be able to know what is in their or their oppponent's piles. I feel like there should be some way to use something like public-key cryptography to accomplish this, but I keep finding holes in my schemes. Can anyone suggest a protocol or point me to some resources on this topic? [Edit] Ok, so I've been thinking about this a bit more, and here's an idea I've come up with. If you can poke any holes in it please let me know. At shuffle time, a player has a stack of cards whose value is known to them. They take these values, concatenate a random salt to each, then hash them. They record the salts, and pass the hashes to their opponent. The opponent concatenates a salt of their own, hashes again, then shuffles the hashes and passes the deck back to the original player. I believe at this point, the deck has been randomized and neither player can have any knowledge of the values. However, when a card is drawn, the opponent can reveal their salt, allowing the first player to determine what the original value is, and when the card is played the player reveals their own salt, allowing the opponent to verify the card value.

    Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >