Search Results

Search found 1303 results on 53 pages for 'dr xis'.

Page 36/53 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

• Looking for advice on Hyper-v storage replication

  - by Notre1

  I am designing a 2-host Hyper-V R2 cluster with 6-10 guests stored on a SMB iSCSI SAN device (probably Promise VessRAID). I will be getting at least two of the SAN devices and need to eliminate the storage a single point of failure. Ideally, that would involve real-time failover for the storage, like the Windows failover clustering does for the hosts. This design will be used at around six of our sites, and I would like to allow for us to eventually setup a cluster at colocation site and replicate each site's VMs there for DR. (Ideally a live multi-site cluster, but a manual import of the VMs would be fine for this sort of DR.) The tools that come with enterprise SANs, like EMC and NetApp, seem to be the most commonly used items for a Hyper-V cluster, but I can't afford their prices with my budget. Outside of them, the two tools that seem to be most common for Hyper-V storage replication are SteelEye (now SIOS) DataKeeper Cluster Edition and Double-Take Availability. Originally, I was planning on using Clustered Shared Volume(s) (CSV), but it seems like replication support for these is either not available or brand new in both these products. It looks like CSVs are supported in Double-Take 5.22, see this discussion, but I don't think I want to run something that new in production. Right now, it seems like the best option for me is not to implement CSVs, implement some sort of storage replication, and upgrade to CSVs at a later date once replicating them is more mature. I would love to have live migration, and CSVs are not required for live migration if you are using one LUN per VM, so I guess this is what I'll do. I would prefer to stick to the using the Microsoft Windows Server and Hyper-V tools and features as much as possible. From that standpoint, SteelEye looks more appealing than Double-Take because they make the DataKeeper volume(s) available to the Failover Clustering Manager and then failover clustering is all configured and managed through the native Microsoft tools. Double-Take says that "clustered Hyper-V hosts are not supported," and Double-Take Availability itself seems to be what is used for the actual clustering and failover. Does anyone know if any of these replication tools work with more than two hosts in the cluster? All the information I can find on the web only uses two hosts in their examples. Are there any better tools than SteelEye and Double-Take for doing what I am trying to do, which is eliminate the storage as as single point of failure? Neverfail, AppAssure, and DataCore all seem to offer similar functionality, but they don't seems to be as popular as SteelEye and Double-Take. I have seen a number of people suggest using Starwind iSCSI SAN software for the shared storage, which includes replication (and CSV replication at that). There are a couple of reasons I have not seriously considered this route: 1) The company I work for is exclusively a Dell shop and Dell does not have any servers with that I can pack with more than six 3.5" SATA drives. 2) In the future, it could be advantegous for us to not be locked into a particular brand or type of storage and third-party replication softwares all allow replication to heterogeneous storage devices. I am pretty new to iSCSI and clustering, so please let me know if it looks like I am planning something that goes against best practices or overlooking/missing something.

  Read the article

• WiX 3 Tutorial: Generating file/directory fragments with Heat.exe

  - by Mladen Prajdic

  In previous posts I’ve shown you our SuperForm test application solution structure and how the main wxs and wxi include file look like. In this post I’ll show you how to automate inclusion of files to install into your build process. For our SuperForm application we have a single exe to install. But in the real world we have 10s or 100s of different files from dll’s to resource files like pictures. It all depends on what kind of application you’re building. Writing a directory structure for so many files by hand is out of the question. What we need is an automated way to create this structure. Enter Heat.exe. Heat is a command line utility to harvest a file, directory, Visual Studio project, IIS website or performance counters. You might ask what harvesting means? Harvesting is converting a source (file, directory, …) into a component structure saved in a WiX fragment (a wxs) file. There are 2 options you can use: Create a static wxs fragment with Heat and include it in your project. The pro of this is that you can add or remove components by hand. The con is that you have to do the pro part by hand. Automation always beats manual labor. Run heat command line utility in a pre-build event of your WiX project. I prefer this way. By always recreating the whole fragment you don’t have to worry about missing any new files you add. The con of this is that you’ll include files that you otherwise might not want to. There is no perfect solution so pick one and deal with it. I prefer using the second way. A neat way of overcoming the con of the second option is to have a post-build event on your main application project (SuperForm.MainApp in our case) to copy the files needed to be installed in a special location and have the Heat.exe read them from there. I haven’t set this up for this tutorial and I’m simply including all files from the default SuperForm.MainApp \bin directory. Remember how we created a System Environment variable called SuperFormFilesDir? This is where we’ll use it for the first time. The command line text that you have to put into the pre-build event of your WiX project looks like this: "$(WIX)bin\heat.exe" dir "$(SuperFormFilesDir)" -cg SuperFormFiles -gg -scom -sreg -sfrag -srd -dr INSTALLLOCATION -var env.SuperFormFilesDir -out "$(ProjectDir)Fragments\FilesFragment.wxs" After you install WiX you’ll get the WIX environment variable. In the pre/post-build events environment variables are referenced like this: $(WIX). By using this you don’t have to think about the installation path of the WiX. Remember: for 32 bit applications Program files folder is named differently between 32 and 64 bit systems. $(ProjectDir) is obviously the path to your project and is a Visual Studio built in variable. You can view all Heat.exe options by running it without parameters but I’ll explain some that stick out the most. dir "$(SuperFormFilesDir)": tell Heat to harvest the whole directory at the set location. That is the location we’ve set in our System Environment variable. –cg SuperFormFiles: the name of the Component group that will be created. This name is included in out Feature tag as is seen in the previous post. -dr INSTALLLOCATION: the directory reference this fragment will fall under. You can see the top level directory structure in the previous post. -var env.SuperFormFilesDir: the name of the variable that will replace the SourceDir text that would otherwise appear in the fragment file. -out "$(ProjectDir)Fragments\FilesFragment.wxs": the full path and name under which the fragment file will be saved. If you have source control you have to include the FilesFragment.wxs into your project but remove its source control binding. The auto generated FilesFragment.wxs for our test app looks like this: <?xml version="1.0" encoding="utf-8"?><Wix xmlns="http://schemas.microsoft.com/wix/2006/wi"> <Fragment> <ComponentGroup Id="SuperFormFiles"> <ComponentRef Id="cmp5BB40DB822CAA7C5295227894A07502E" /> <ComponentRef Id="cmpCFD331F5E0E471FC42A1334A1098E144" /> <ComponentRef Id="cmp4614DD03D8974B7C1FC39E7B82F19574" /> <ComponentRef Id="cmpDF166522884E2454382277128BD866EC" /> </ComponentGroup> </Fragment> <Fragment> <DirectoryRef Id="INSTALLLOCATION"> <Component Id="cmp5BB40DB822CAA7C5295227894A07502E" Guid="{117E3352-2F0C-4E19-AD96-03D354751B8D}"> <File Id="filDCA561ABF8964292B6BC0D0726E8EFAD" KeyPath="yes" Source="$(env.SuperFormFilesDir)\SuperForm.MainApp.exe" /> </Component> <Component Id="cmpCFD331F5E0E471FC42A1334A1098E144" Guid="{369A2347-97DD-45CA-A4D1-62BB706EA329}"> <File Id="filA9BE65B2AB60F3CE41105364EDE33D27" KeyPath="yes" Source="$(env.SuperFormFilesDir)\SuperForm.MainApp.pdb" /> </Component> <Component Id="cmp4614DD03D8974B7C1FC39E7B82F19574" Guid="{3443EBE2-168F-4380-BC41-26D71A0DB1C7}"> <File Id="fil5102E75B91F3DAFA6F70DA57F4C126ED" KeyPath="yes" Source="$(env.SuperFormFilesDir)\SuperForm.MainApp.vshost.exe" /> </Component> <Component Id="cmpDF166522884E2454382277128BD866EC" Guid="{0C0F3D18-56EB-41FE-B0BD-FD2C131572DB}"> <File Id="filF7CA5083B4997E1DEC435554423E675C" KeyPath="yes" Source="$(env.SuperFormFilesDir)\SuperForm.MainApp.vshost.exe.manifest" /> </Component> </DirectoryRef> </Fragment></Wix> The $(env.SuperFormFilesDir) will be replaced at build time with the directory where the files to be installed are located. There is nothing too complicated about this. In the end it turns out that this sort of automation is great! There are a few other ways that Heat.exe can compose the wxs file but this is the one I prefer. It just seems the clearest. Play with its options to see what can it do. It’s one awesome little tool.   WiX 3 tutorial by Mladen Prajdic navigation WiX 3 Tutorial: Solution/Project structure and Dev resources WiX 3 Tutorial: Understanding main wxs and wxi file WiX 3 Tutorial: Generating file/directory fragments with Heat.exe

  Read the article

• LightDM will not start after stopping it

  - by Sweeters

  I am running Ubuntu 11.10 "Oneiric Ocelot", and in trying to install the nvidia CUDA developer drivers I switched to a virtual terminal (Ctrl-Alt-F5) and stopped lightdm (installation required that no X server instance be running) through sudo service lightdm stop. Re-starting lightdm with sudo service lightdm start did not work: A couple of * Starting [...] lines where displayed, but the process hanged. (I do not remember at which point, but I think it was * Starting System V runlevel compatibility. I manually rebooted my laptop, and ever since booting seems to hang, usually around the * Starting anac(h)ronistic cron [OK] log line (not consistently at that point, though). From that point on, I seem to be able to interact with my system only through a tty session (Ctrl-Alt-F1). I've tried purging and reinstalling both lightdm and gdm, as well as selecting both as the default display managers (through sudo dpkg-reconfigure [lightdm / gdm] or by manually editing /etc/X11/default-display-manager) through both apt-get and aptitude (that shouldn't make a difference anyway) after updating the packages, but the problem persists. Some of the responses I'm getting are the following: After running sudo dpkg-reconfigure lightdm (but not ... gdm) I get the following message: dpkg-maintscript-helper:warning: environment variable DPKG_MATINSCRIPT_NAME missing dpkg-maintscript-helper:warning: environment variable DPKG_MATINSCRIPT_PACKAGE missing After trying sudo service lightdm start or sudo start lightdm I get to see the boot loading screen again but nothing changes. If I go back to the tty shell I see lightdm start/running, process <num> but ps -e | grep lightdm gives no output. After trying sudo service gdm start or sudo starg gdm I get the gdm start/running, process <num> message, and gdm-binary is supposedly an active process, but all that happens is that the screen blinks a couple of times and nothing else. Other candidate solutions that I'd found on the web included running startx but when I try that I get an error output [...] Fatal server error: no screens found [...]. Moreover, I made sure that lightdm-gtk-greeter is installed but that did not help either. Please excuse my not including complete outputs/logs; I am writing this post from another computer and it's hard to manually copy the complete logs. Also, I've seen several posts that had to do with similar problems, but either there was no fix, or the one suggested did not work for me. In closing: Please help! I very much hope to avoid re-installing Ubuntu from scratch! :) Alex @mosi I did not manage to fix the NVIDIA kernel driver as per your instructions. I should perhaps mention that I'm on a Dell XPS15 laptop with an NVIDIA Optimus graphics card, and that I have bumblebee installed (which installs nvidia drivers during its installation, I believe). Issuing the mentioned commands I get the following: ~$uname -r 3.0.0-12-generic ~$lsmod | grep -i nvidia nvidia 11713772 0 ~$dmesg | grep -i nvidia [ 8.980041] nvidia: module license 'NVIDIA' taints kernel. [ 9.354860] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 9.354864] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 9.354868] nvidia 0000:01:00.0: enabling device (0006 -> 0007) [ 9.354873] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.354879] nvidia 0000:01:00.0: setting latency timer to 64 [ 9.355052] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 280.13 Wed Jul 27 16:53:56 PDT 2011 Also, running aptitude search nvidia gives me the following: p nvidia-173 - NVIDIA binary Xorg driver, kernel module a p nvidia-173-dev - NVIDIA binary Xorg driver development file p nvidia-173-updates - NVIDIA binary Xorg driver, kernel module a p nvidia-173-updates-dev - NVIDIA binary Xorg driver development file p nvidia-96 - NVIDIA binary Xorg driver, kernel module a p nvidia-96-dev - NVIDIA binary Xorg driver development file p nvidia-96-updates - NVIDIA binary Xorg driver, kernel module a p nvidia-96-updates-dev - NVIDIA binary Xorg driver development file p nvidia-cg-toolkit - Cg Toolkit - GPU Shader Authoring Language p nvidia-common - Find obsolete NVIDIA drivers i nvidia-current - NVIDIA binary Xorg driver, kernel module a p nvidia-current-dev - NVIDIA binary Xorg driver development file c nvidia-current-updates - NVIDIA binary Xorg driver, kernel module a p nvidia-current-updates-dev - NVIDIA binary Xorg driver development file i nvidia-settings - Tool of configuring the NVIDIA graphics dr p nvidia-settings-updates - Tool of configuring the NVIDIA graphics dr v nvidia-va-driver - v nvidia-va-driver - I've tried manually installing (sudo aptitude install <package>) packages nvidia-common and nvidia-settings-updates but to no avail. For example, sudo aptitude install nvidia-settings-updates returns the following log: Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... No packages will be installed, upgraded, or removed. 0 packages upgraded, 0 newly installed, 0 to remove and 83 not upgraded. Need to get 0 B of archives. After unpacking 0 B will be used. Writing extended state information... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... The same happens with the Linux headers (i.e. I cannot seem to be able to install linux-headers-3.0.0-12-generic). The output of aptitude search linux-headers is as follows: v linux-headers - v linux-headers - v linux-headers-2.6 - i linux-headers-2.6.38-11 - Header files related to Linux kernel versi i linux-headers-2.6.38-11-generic - Linux kernel headers for version 2.6.38 on i A linux-headers-2.6.38-8 - Header files related to Linux kernel versi i A linux-headers-2.6.38-8-generic - Linux kernel headers for version 2.6.38 on v linux-headers-3 - v linux-headers-3.0 - v linux-headers-3.0 - i A linux-headers-3.0.0-12 - Header files related to Linux kernel versi p linux-headers-3.0.0-12-generic - Linux kernel headers for version 3.0.0 on p linux-headers-3.0.0-12-generic- - Linux kernel headers for version 3.0.0 on p linux-headers-3.0.0-12-server - Linux kernel headers for version 3.0.0 on p linux-headers-3.0.0-12-virtual - Linux kernel headers for version 3.0.0 on p linux-headers-generic - Generic Linux kernel headers p linux-headers-generic-pae - Generic Linux kernel headers v linux-headers-lbm - v linux-headers-lbm - v linux-headers-lbm-2.6 - v linux-headers-lbm-2.6 - p linux-headers-lbm-3.0.0-12-gene - Header files related to linux-backports-mo p linux-headers-lbm-3.0.0-12-gene - Header files related to linux-backports-mo p linux-headers-lbm-3.0.0-12-serv - Header files related to linux-backports-mo p linux-headers-server - Linux kernel headers on Server Equipment. p linux-headers-virtual - Linux kernel headers for virtual machines @heartsmagic I did try purging and reinstalling any nvidia driver packages, but it did not seem to make a difference, My xorg.conf file contains the following: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 280.13 ([email protected]) Wed Jul 27 17:15:58 PDT 2011 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Creating a user account on a mac you don't have admin access to [migrated]

  - by mouse

  I am trying to create a user account on a school computer so I can run processes (like compiling large libraries) with admin permissions settings. This way I can walk away and let other people user the computer, and come back after class to retrieve the binaries. Usually some smart person decides to shut the machine down, but if I had higher permissions they wouldn't be able to terminate my processes. Right now I use the guest account, which everyone has access to. If you think this is in some way unethical or a bad idea, please criticize. tl,dr I tried using the dscl series of commands in single user mode as root, as recommended by this site. It returns this error: Cannot open remote host, error: DSOpenDirServiceErr How can I create a local user on this machine to compile my code with higher permissions?

  Read the article

• Do MSDTC and disaster recovery go together?

  - by DevDelivery

  Our application writes to multiple Sql Server databases within a distributed transaction. The Ops guys are saying that this messes up their disaster recovery plan because while the transactions on the live tables may commit at the same time, the log shipping on the separate databases happen at slightly different times. So in in a disaster recovery situation, there will be a few partial transactions. Is there a method for maintaining separate but synced databases in DR? Or do we have to re-design to relatively independent databases (or a single database)?

  Read the article

• DRBD Not syncing between my nodes

  - by Mike Curry

  Some version info: Operating system is Ubuntu 11.10, on EC2, kernel is 3.0.0-16-virtual and the application info is: Version: 8.3.11 (api:88) GIT-hash: 0de839cee13a4160eed6037c4bddd066645e23c5 build by buildd@allspice, 2011-07-05 19:51:07 Getting some strange errors in dmesg (seen below) as well, there is no replication happening. I have made my first node primary and its showing: drbd driver loaded OK; device status: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 m:res cs ro ds p mounted fstype 0:r0 StandAlone Primary/Unknown UpToDate/DUnknown r----s ext3 my secondary node is showing: drbd driver loaded OK; device status: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 m:res cs ro ds p mounted fstype 0:r0 StandAlone Secondary/Unknown Inconsistent/DUnknown r----s Showing /proc/drbd on the master shows: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 0: cs:StandAlone ro:Primary/Unknown ds:UpToDate/DUnknown r----s ns:0 nr:0 dw:4 dr:1073 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:262135964 Showing /proc/drbd on the slave shows that there is nothing being transfered... version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 0: cs:StandAlone ro:Secondary/Unknown ds:Inconsistent/DUnknown r----s ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:262135964 Here is my config... resource r0 { protocol C; startup { wfc-timeout 15; degr-wfc-timeout 60; } net { cram-hmac-alg sha1; shared-secret "test123; } on drbd01 { device /dev/drbd0; disk /dev/xvdm; address 23.XX.XX.XX:7788; # blocked out ip meta-disk internal; } on drbd02 { device /dev/drbd0; disk /dev/xvdm; address 184.XX.XX.XX:7788; #blocked out ip meta-disk internal; } } I have run the following on the master: sudo drbdadm -- --overwrite-data-of-peer primary all There is no firewall between the systems. Here is the dmesg with some errors: [2285172.969955] drbd: initialized. Version: 8.3.11 (api:88/proto:86-96) [2285172.969960] drbd: srcversion: DA5A13F16DE6553FC7CE9B2 [2285172.969962] drbd: registered as block device major 147 [2285172.969965] drbd: minor_table @ 0xffff88000276ea00 [2285173.000952] block drbd0: Starting worker thread (from drbdsetup [1300]) [2285173.003971] block drbd0: disk( Diskless -> Attaching ) [2285173.006150] block drbd0: No usable activity log found. [2285173.006154] block drbd0: Method to ensure write ordering: flush [2285173.006158] block drbd0: max BIO size = 4096 [2285173.006165] block drbd0: drbd_bm_resize called with capacity == 524271928 [2285173.008512] block drbd0: resync bitmap: bits=65533991 words=1023969 pages=2000 [2285173.008518] block drbd0: size = 250 GB (262135964 KB) [2285173.079566] block drbd0: bitmap READ of 2000 pages took 17 jiffies [2285173.081189] block drbd0: recounting of set bits took additional 1 jiffies [2285173.081194] block drbd0: 250 GB (65533991 bits) marked out-of-sync by on disk bit-map. [2285173.081203] block drbd0: Suspended AL updates [2285173.081210] block drbd0: disk( Attaching -> UpToDate ) [2285173.081214] block drbd0: attached to UUIDs 1C1291D39584C1D1:0000000000000004:0000000000000000:0000000000000000 [2285173.095016] block drbd0: conn( StandAlone -> Unconnected ) [2285173.095046] block drbd0: Starting receiver thread (from drbd0_worker [1301]) [2285173.099297] block drbd0: receiver (re)started [2285173.099304] block drbd0: conn( Unconnected -> WFConnection ) [2285173.099330] block drbd0: bind before connect failed, err = -99 [2285173.099346] block drbd0: conn( WFConnection -> Disconnecting ) [2285173.295788] block drbd0: Discarding network configuration. [2285173.295815] block drbd0: Connection closed [2285173.295826] block drbd0: conn( Disconnecting -> StandAlone ) [2285173.295840] block drbd0: receiver terminated [2285173.295844] block drbd0: Terminating drbd0_receiver Edit: Reading some other similar issues, it was suggested to do a 'drbdadm dump all', so I figured it couldn't hurt. ubuntu@drbd01:~$ drbdadm dump all /etc/drbd.conf:19: in resource r0, on drbd01: IP 23.XX.XX.XX not found on this host. and on slave: root@drbd02:~# drbdadm dump all /etc/drbd.conf:25: in resource r0, on drbd02: IP 184.XX.XX.XX not found on this host. Strange it doesn't find its own ip, however, this is an Amazon EC2 system using an elastic IP... here are my ipconfigs for both... master: ubuntu@drbd01:~$ ifconfig eth0 Link encap:Ethernet HWaddr 22:00:0a:1c:27:11 inet addr:10.28.39.17 Bcast:10.28.39.63 Mask:255.255.255.192 inet6 addr: fe80::2000:aff:fe1c:2711/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1569 errors:0 dropped:0 overruns:0 frame:0 TX packets:1169 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:124409 (124.4 KB) TX bytes:213601 (213.6 KB) Interrupt:26 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) slave: root@drbd02:~# ifconfig eth0 Link encap:Ethernet HWaddr 12:31:3f:00:14:9d inet addr:10.160.27.107 Bcast:10.160.27.255 Mask:255.255.254.0 inet6 addr: fe80::1031:3fff:fe00:149d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:915 errors:0 dropped:0 overruns:0 frame:0 TX packets:774 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:75381 (75.3 KB) TX bytes:109673 (109.6 KB) Interrupt:26 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

  Read the article

• How to securely generate memorable passwords?

  - by Tim

  Whenever I need new passwords I use some tools to generate those, preferable memorable passwords, but I've been wondering how secure this might actually be. Using The xkcd random number generator is probably pretty bad, cat /dev/random is probably pretty good, but generating memorable passwords seems a bit more tricky. Whenever a program generates a memorable password, it only uses a subset of the total password space available, and it is not clear to me how big this space is. Of course a long password should help in this case, but if the `memorable' part of the program is too predictable, your passwords are not very good in the end. TL;DR: how secure are memorable password generators, given the fact that `memorable' passwords are a subset of total password space? Some tools I know of: pwgen -- seems ok, but passwords are not too memorable Mac Password Assistant - generates memorable passwords but it is unclear to me how this works.

  Read the article

• How to install Mac OS X from Windows without a CD

  - by John Smith

  I have two partitions, one for windows the other for Mac OS X. Recently, my Mac OS X crashed and my partition rendered unbootable. When I insert Mac OS X's installation CD everything seems normal from startup, to choosing whether to boot from Windows or CD, until the CD boots. The screen flickers and it becomes extremely dark can barely see anything but I can see that it is booted correctly. I tried increasing brightness but that did not work. After hours of trying to read what is on the screen and guessing where to click the installation did not go through... It took more than a couple of hours so I restarted. Now the partition is accessible through Windows but is not bootable. TL;DR Is it possible to install Mac OS X on a visible partition without the CD through Windows XP?... Thanks

  Read the article

• Will being a VPN Client interrupt web pages hosted by IIS?

  - by f1gm3nt3d

  We have a dedicated server that is primarily used to host our website. I've been tasked with determining the feasibility of setting up a VPN connection from it to our Internal Network at our offices for a few ease of use purposes. My concern is that if I establish this VPN connection our Website will only be available internally and not to the internet in general. I'm concerned about this because in everything I read the fact is stated that by default all network traffic is routed over the VPN connection when it's established, is this also true for applications such as IIS that are listening for incoming connections? TL;DR Will having a VPN Client up and running cause a problem with server applications that may be listening on the NIC connected to the Internet due to changes that VPN makes in the routing tables?

  Read the article

• Entering Unicode Characters using NumPad in Chrome conflicting with Options Menu

  - by YatharthROCK

  TL;DR: Can't use E while entering Unicode on NumPad — conflicting with Options menu OK, so I finally got entering Hex Unicode chars on my laptop using the NumPad working using this answer from this link But when I was trying to enter the Irony Mark (? U+2E2E), as soon as I hit the E, Options opened up like in old-style menus where pressing Alt + letter brought up the relevant menu. This annoying behaviour doesn't let me enter any Unicode code-point that has an E. This works fine outside Chrome. How can I stop this?

  Read the article

• Can I use nginx to start EC2 instances on demand?

  - by Gabe Hollombe

  TL;DR - Is there a way to make nginx act as an elastic load balancer that will spin up EC2 instances on demand, allowing for the case when periods of no demand mean no instances will be running? Longer explanation - I have an nginx server that proxy_pass'es requests to a server on EC2. This server doesn't get many requests, so I'd like to keep the server spun down during periods of inactivity (I already have a script to do this). Then, when the instance is spun down and nginx gets a request for that instance, it will time out when trying to get a response from it. At this point, can I somehow trigger a shell command on the server to use EC2's command line tools to spin up the instance, then re-try the user's request after it has started?

  Read the article

• Has anyone used products by StorSimple? [closed]

  - by AlamedaDad

  Their products are storage systems similar to NetApp, but their "hook" is they provide automated tiered storage with the third tier being Cloud providers like Amazon and Azure. They have an interesting story in which they provide primary SAN/iSCSI storage to VMWare and Exchange and at the same time do snaphots to the Cloud. This provides a possible DR option if you have a second system at an alternate location. I was impressed, but I've never heard of them so I'm looking for input and advise on the product. Thanks in advance...

  Read the article

• www.domain.com and domain.com records in microsoft dns

  - by captainmish

  Hello Apologies if this is already answered, its a tricky one to search for! We are using split DNS for a domain used internally. For the outside nameservers, theres a simple zone with: @ IN A ip.ad.dr.ess www IN A ip.ad.re.ss This works fine externally. Internally its a windows server 2003 DNS server, so the www a record works fine, but I cant figure out how to add that primary record (using at symbol @ in bind). Can anyone help with how to get the same results from windows dns? I just want to be able to add a record for domain.com without being forced to use something.domain.com Thanks, Edit: This domain is not the "main" AD domain, and not used for logins etc.

  Read the article

• Bandwidth sizing for simultaneous RDP sessions

  - by Gareth Marlow

  We're doing some DR scenario planning which will require up to 150 users to RDP into their desktop machines (mainly running Windows XP) over our VPN. We have a 2mbit uncontended internet connection at the moment but there's scope to upgrade this and also to use a secondary SDSL line to give us more bandwidth. Typical bandwidth figures I've seen suggest to plan for 64kbps per session, which works out to 9.6mbps in total. I'd like to know: Does anyone have any real-world data which would support these estimates? Are there any operational 'gotcha's that we need to be aware of? Thanks!

  Read the article

• Xen DomU on DRBD device: barrier errors

  - by Halfgaar

  I'm testing setting up a Xen DomU with a DRBD storage for easy failover. Most of the time, immediatly after booting the DomU, I get an IO error: [ 3.153370] EXT3-fs (xvda2): using internal journal [ 3.277115] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.336014] nf_conntrack version 0.5.0 (3899 buckets, 15596 max) [ 3.515604] init: failsafe main process (397) killed by TERM signal [ 3.801589] blkfront: barrier: write xvda2 op failed [ 3.801597] blkfront: xvda2: barrier or flush: disabled [ 3.801611] end_request: I/O error, dev xvda2, sector 52171168 [ 3.801630] end_request: I/O error, dev xvda2, sector 52171168 [ 3.801642] Buffer I/O error on device xvda2, logical block 6521396 [ 3.801652] lost page write due to I/O error on xvda2 [ 3.801755] Aborting journal on device xvda2. [ 3.804415] EXT3-fs (xvda2): error: ext3_journal_start_sb: Detected aborted journal [ 3.804434] EXT3-fs (xvda2): error: remounting filesystem read-only [ 3.814754] journal commit I/O error [ 6.973831] init: udev-fallback-graphics main process (538) terminated with status 1 [ 6.992267] init: plymouth-splash main process (546) terminated with status 1 The manpage of drbdsetup says that LVM (which I use) doesn't support barriers (better known as tagged command queuing or native command queing), so I configured the drbd device not to use barriers. This can be seen in /proc/drbd (by "wo:f, meaning flush, the next method drbd chooses after barrier): 3: cs:Connected ro:Primary/Secondary ds:UpToDate/UpToDate C r---- ns:2160152 nr:520204 dw:2680344 dr:2678107 al:3549 bm:9183 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:0 And on the other host: 3: cs:Connected ro:Secondary/Primary ds:UpToDate/UpToDate C r---- ns:0 nr:2160152 dw:2160152 dr:0 al:0 bm:8052 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:0 I also enabled the option disable_sendpage, as per the drbd docs: cat /sys/module/drbd/parameters/disable_sendpage Y I also tried adding barriers=0 to fstab as mount option. Still it sometimes says: [ 58.603896] blkfront: barrier: write xvda2 op failed [ 58.603903] blkfront: xvda2: barrier or flush: disabled I don't even know if ext3 has a nobarrier option. And, because only one of my storage systems is battery backed, it would not be smart anyway. Why does it still compain about barriers when I disabled that? Both host are: Debian: 6.0.4 uname -a: Linux 2.6.32-5-xen-amd64 drbd: 8.3.7 Xen: 4.0.1 Guest: Ubuntu 12.04 LTS uname -a: Linux 3.2.0-24-generic pvops drbd resource: resource drbdvm { meta-disk internal; device /dev/drbd3; startup { # The timeout value when the last known state of the other side was available. 0 means infinite. wfc-timeout 0; # Timeout value when the last known state was disconnected. 0 means infinite. degr-wfc-timeout 180; } syncer { # This is recommended only for low-bandwidth lines, to only send those # blocks which really have changed. #csums-alg md5; # Set to about half your net speed rate 60M; # It seems that this option moved to the 'net' section in drbd 8.4. (later release than Debian has currently) verify-alg md5; } net { # The manpage says this is recommended only in pre-production (because of its performance), to determine # if your LAN card has a TCP checksum offloading bug. #data-integrity-alg md5; } disk { # Detach causes the device to work over-the-network-only after the # underlying disk fails. Detach is not default for historical reasons, but is # recommended by the docs. # However, the Debian defaults in drbd.conf suggest the machine will reboot in that event... on-io-error detach; # LVM doesn't support barriers, so disabling it. It will revert to flush. Check wo: in /proc/drbd. If you don't disable it, you get IO errors. no-disk-barrier; } on host1 { # universe is a VG disk /dev/universe/drbdvm-disk; address 10.0.0.1:7792; } on host2 { # universe is a VG disk /dev/universe/drbdvm-disk; address 10.0.0.2:7792; } } DomU cfg: bootloader = '/usr/lib/xen-default/bin/pygrub' vcpus = '2' memory = '512' # # Disk device(s). # root = '/dev/xvda2 ro' disk = [ 'phy:/dev/drbd3,xvda2,w', 'phy:/dev/universe/drbdvm-swap,xvda1,w', ] # # Hostname # name = 'drbdvm' # # Networking # # fake IP for posting vif = [ 'ip=1.2.3.4,mac=00:16:3E:22:A8:A7' ] # # Behaviour # on_poweroff = 'destroy' on_reboot = 'restart' on_crash = 'restart' In my test setup: the primary host's storage is 9650SE SATA-II RAID PCIe with battery. The secondary is software RAID1. Isn't DRBD+Xen widely used? With these problems, it's not going to work.

  Read the article

• seeking to upgrade my bash magic. help decipher this command: bash -s stable

  - by tim

  ok so i'm working through a tutorial to get rvm installed on my mac. the bash command to get rvm via curl is curl -L https://get.rvm.io | bash -s stable i understand the first half's curl command at location rvm.io, and that the result is piped to the subsequent bash command, but i'm not sure what that command is doing. My questions: -s : im always confused about how to refer to these. what type of thing is this: a command line argument? a switch? something else? -s : what is it doing? i have googled for about half an hour but not sure how to refer to it makes it difficult. stable : what is this? tl;dr : help me decipher the command bash -s stable to those answering this post, i aspire to one day be as bash literate as you. until then, opstards such as myself thank you for the help!

  Read the article

• Is there a path from OpenSCAD to WebGL?

  - by Andrew Domaszek

  tl;dr version, Does a software path exist to convert from openscad input to render on a website via webgl? What I'm trying to do is display OpenSCAD created designs uploaded via post on a LEMPy driven website; this is currently done by outputting to a static png image. I would like to render one of openscad's export formats(wikibooks) and convert for display in javascript/webgl through some software path available via linux batch. CPU and RAM are relatively unconstrained but no GPU available. I've looked into CopperLeicht, but it requires CopperCube output which would require windows or wine. FOSS is preferred but not required. edit: I found three.js has converters for fbx, dae, obj, and 3ds formats which might be helpful as one of the last steps.

  Read the article

• SQL Server 2008 R2 100% availability

  - by Mark Henderson

  Is there any way to provide 100% uptime on SQL Server 2008 R2? From my experience, the downtimes for the different replication methods are: Log Shipping: Lots (for DR only) Mirroring w. NLB: ~ 45 seconds Clustering: ~ 5-15 seconds And all of these solutions involve all of the connections being dropped from the source, so if the downtime is too long or the app's gateway doesn't support reconnection in the middle of task, then you're out of luck. The only way I can think to get around this is to abstract the clustering a level (by virtualising and then enabling VMWare FT. Yuck. Good luck getting this to work on a quad-socket, 32-core system anyway.). Is there any other way of providing 100% uptime of SQL Server?

  Read the article

• Setup routing and iptables for new VPN connection to redirect **only** ports 80 and 443

  - by Steve

  I have a new VPN connection (using openvpn) to allow me to route around some ISP restrictions. Whilst it is working fine, it is taking all the traffic over the vpn. This is causing me issues for downloading (my internet connection is a lot faster than the vpn allows), and for remote access. I run an ssh server, and have a daemon running that allows me to schdule downloads via my phone. I have my existing ethernet connection on eth0, and the new VPN connection on tun0. I believe I need to setup the default route to use my existing eth0 connection on the 192.168.0.0/24 network, and set the default gateway to 192.168.0.1 (my knowledge is shaky as I haven't done this for a number of years). If that is correct, then I'm not exactly sure how to do it!. My current routing table is: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface MSS Window irtt 0.0.0.0 10.51.0.169 0.0.0.0 UG 0 0 0 tun0 0 0 0 10.51.0.1 10.51.0.169 255.255.255.255 UGH 0 0 0 tun0 0 0 0 10.51.0.169 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 0 0 0 85.25.147.49 192.168.0.1 255.255.255.255 UGH 0 0 0 eth0 0 0 0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 0 0 0 192.168.0.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 0 0 0 After fixing the routing, I believe I need to use iptables to configure prerouting or masquerading to force everything for destination port 80 or 443 over tun0. Again, I'm not exactly sure how to do this! Everything I've found on the internet is trying to do something far more complicated, and trying to sort the wood from the trees is proving difficult. Any help would be much appreciated. UPDATE So far, from the various sources, I've cobbled together the following: #!/bin/sh DEV1=eth0 IP1=`ifconfig|perl -nE'/dr:(\S+)/&&say$1'|grep 192.` GW1=192.168.0.1 TABLE1=internet TABLE2=vpn DEV2=tun0 IP2=`ifconfig|perl -nE'/dr:(\S+)/&&say$1'|grep 10.` GW2=`route -n | grep 'UG[ \t]' | awk '{print $2}'` ip route flush table $TABLE1 ip route flush table $TABLE2 ip route show table main | grep -Ev ^default | while read ROUTE ; do ip route add table $TABLE1 $ROUTE ip route add table $TABLE2 $ROUTE done ip route add table $TABLE1 $GW1 dev $DEV1 src $IP1 ip route add table $TABLE2 $GW2 dev $DEV2 src $IP2 ip route add table $TABLE1 default via $GW1 ip route add table $TABLE2 default via $GW2 echo "1" > /proc/sys/net/ipv4/ip_forward echo "1" > /proc/sys/net/ipv4/ip_dynaddr ip rule add from $IP1 lookup $TABLE1 ip rule add from $IP2 lookup $TABLE2 ip rule add fwmark 1 lookup $TABLE1 ip rule add fwmark 2 lookup $TABLE2 iptables -t nat -A POSTROUTING -o $DEV1 -j SNAT --to-source $IP1 iptables -t nat -A POSTROUTING -o $DEV2 -j SNAT --to-source $IP2 iptables -t nat -A PREROUTING -m state --state ESTABLISHED,RELATED -j CONNMARK --restore-mark iptables -A OUTPUT -m state --state ESTABLISHED,RELATED -j CONNMARK --restore-mark iptables -t nat -A PREROUTING -i $DEV1 -m state --state NEW -j CONNMARK --set-mark 1 iptables -t nat -A PREROUTING -i $DEV2 -m state --state NEW -j CONNMARK --set-mark 2 iptables -t nat -A PREROUTING -m connmark --mark 1 -j MARK --set-mark 1 iptables -t nat -A PREROUTING -m connmark --mark 2 -j MARK --set-mark 2 iptables -t nat -A PREROUTING -m state --state NEW -m connmark ! --mark 0 -j CONNMARK --save-mark iptables -t mangle -A PREROUTING -i $DEV2 -m state --state NEW -p tcp --dport 80 -j CONNMARK --set-mark 2 iptables -t mangle -A PREROUTING -i $DEV2 -m state --state NEW -p tcp --dport 443 -j CONNMARK --set-mark 2 route del default route add default gw 192.168.0.1 eth0 Now this seems to be working. Except it isn't! Connections to the blocked websites are going through, connections not on ports 80 and 443 are using the non-VPN connection. However port 80 and 443 connections that aren't to the blocked websites are using the non-VPN connection too! As the general goal has been reached, I'm relatively happy, but it would be nice to know why it isn't working exactly right. Any ideas? For reference, I now have 3 routing tables, main, internet, and vpn. The listing of them is as follows... Main: default via 192.168.0.1 dev eth0 10.38.0.1 via 10.38.0.205 dev tun0 10.38.0.205 dev tun0 proto kernel scope link src 10.38.0.206 85.removed via 192.168.0.1 dev eth0 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.73 metric 1 Internet: default via 192.168.0.1 dev eth0 10.38.0.1 via 10.38.0.205 dev tun0 10.38.0.205 dev tun0 proto kernel scope link src 10.38.0.206 85.removed via 192.168.0.1 dev eth0 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.73 metric 1 192.168.0.1 dev eth0 scope link src 192.168.0.73 VPN: default via 10.38.0.205 dev tun0 10.38.0.1 via 10.38.0.205 dev tun0 10.38.0.205 dev tun0 proto kernel scope link src 10.38.0.206 85.removed via 192.168.0.1 dev eth0 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.73 metric 1

  Read the article

• Perform action based on load avg

  - by sfx

  I'm running some web applications on an debian server and have to struggle with ddos attacks sometimes. It's eating up all my resources and I can't ssh anymore into the server. An idea was to drop all connections if the load avg is too high, so there are still resources for me and accept new connections if the load avg is low enough. Since this has to work under heavy load I'm afraid a cronjob wouldn't be fast enough or take too much resources. tl;dr: Is there a way to configure the behavior if the load avg is above a specific threshold?

  Read the article

• Software: Launching League of Legends spectator mode from Command Line (Mac)

  - by Alex Popov

  Background: tl;dr at the end League of Legends has a spectator mode, in which you can watch someone else's game (essentially a replay) with a 3 minute delay. Popular LoL website OP.GG has figured out a clever way of hosting these spectator games on their own servers, thereby making them replayable, as opposed to only being available while the game is on (as Riot does it). If you request a replay from OP.GG, it sends a batch file which looks for where the League is situated and then the magic happens: @start "" "League of Legends.exe" "8394" "LoLLauncher.exe" "" "spectator fspectate.op.gg:4081 tjJbtRLQ/HMV7HuAxWV0XsXoRB4OmFBr 1391881421 NA1" This works fine on Windows. I'm trying to get it to work on Mac (which has an official client). First I tried running the same command by hand, (split for convenience) /Applications/ ... /LeagueOfLegends.app/ ... /LeagueofLegends 8393 LoLLauncher \ /Applications/ ... /LolClient spectator fspectate.op.gg:4081 tjJbtRLQ/HMV7HuAxWV0XsXoRB4OmFBr 1391881421 NA1 Running this, however, just starts the LoLLauncher, which closes all the active League processes. The exactly same thing happens if I just call /Applications/ ... /LeagueOfLegends.app/ ... /LeagueofLegends Next I tried seeing what actually happens when Spectator mode is initiated so I ran $ ps -axf | grep -i lol which showed UID PID PPID C STIME TTY TIME CMD 503 3085 1 0 Wed02pm ?? 0:00.00 (LolClient) 503 24607 1 0 9:19am ?? 0:00.98 /Applications/League of Legends.app/Contents/LOL/RADS/system/UserKernel.app/Contents/MacOS/UserKernel updateandrun lol_launcher LoLLauncher.app 503 24610 24607 0 9:19am ?? 1:08.76 /Applications/League of Legends.app/Contents/LoL/RADS/projects/lol_launcher/releases/0.0.0.122/deploy/LoLLauncher.app/Contents/MacOS/LoLLauncher 503 24611 24610 0 9:19am ?? 1:23.02 /Applications/League of Legends.app/Contents/LoL/RADS/projects/lol_air_client/releases/0.0.0.127/deploy/bin/LolClient -runtime .\ -nodebug META-INF\AIR\application.xml .\ -- 8393 503 24927 24610 0 9:44am ?? 0:03.37 /Applications/League of Legends.app/Contents/LoL/RADS/solutions/lol_game_client_sln/releases/0.0.0.117/deploy/LeagueOfLegends.app/Contents/MacOS/LeagueofLegends 8394 LoLLauncher /Applications/League of Legends.app/Contents/LoL/RADS/projects/lol_air_client/releases/0.0.0.127/deploy/bin/LolClient spectator 216.133.234.17:8088 Yn1oMX/n3LpXNebibzUa1i3Z+s2HV0ul 1400781241 NA1 Of Interest: there is (LolClient) which I cannot kill by it's PID. UserKernel updateandrun lol_launcher LoLLauncher.app is launched first. LoLLauncher is launched by the UserKernel (as we can see from the PPID) The very long command (PID: 24927) is how Spectator mode is launched, and is also launched by UserKernel. Spectator mode is launched in exactly the same way that the OP.GG .bat wanted to, with the only difference that Spectator mode connects to Riot instead of OP.GG's spectate server. I tried attaching GDB to the LolClient, but I couldn't get anything meaningful from it since it's an Adobe AIR application (and I've never used GDB with code other than mine own). Next I ran dtruss -a -b 100m -f -p $PID on everything I could think of: the LolClient, the LolLauncher and the UserKernel and skimmed the half a million lines produced. I found stuff like the GET request used to get the information of the game to spectate, but I could not see any launch of the equivalent of League of Legends.exe with spectator options. Finally, I ran lsof | grep -i lol to see if anything else was opened in the process, but didn't find anything that seemed appropriate. Open were UserKernel, LolLauncher, LolClient, Adobe AIR, LeagueofLegends and then Bugsplat, all of which are expected. None of this seemed especially relevant to figuring out how LeagueofLegends was opened into spectator mode. It obviously can be done, since Spectator mode is accessible from within the client. It seems likely that it can be done from the CLI, since Windows can do it and the clients are supposed to equals. Unless I'm missing something in the difference between how UNIX and Windows handle CLI application launches. My question is if there are any other things I can try to figure out how to launch Spectator mode myself. tl;dr: Trying to get into spectator mode from the CLI. It's possible on Windows (see first code block) but it just restarts League on Mac. What else can I try to find what call is made, and how to reproduce it? PS: Please let me know how I can improve this question or its formatting, I'd love to use StackOverflow/SuperUser, but as the guys said on the podcast this week (Ep. 59) it's very intimidating. Sorry for posting this on StackOverflow the first time :(

  Read the article

• XKB - remap arrow keys and preserve shift behaviour to select text

  - by dgirardi

  I realize arrow key remapping is an old problem, however I cannot seem to find a good solution that lets me select text with SHIFT + remapped keys as I would do with the vanilla arrow keys. For instance, if I remap Caps Lock to ISO_Level3_Shift and set xkb_symbols to read either key <AC08> { [ k, K , Down, Down] }; or key <AC08> { type="THREE_LEVEL", [ k, K , Down ] }; Pressing Shift+CapsLock+K will behave exactly as CapsLock+K (while Shift+Down behaves differently from Down alone). I had somewhat more success using higher level macro utilities and generating keyboard events (i.e. generate both the shift and the arrow keypresses); hoever that approach has a whole set of different problems - often the UI response to a simulated keypress is different from the "real" keypress, and there are performance problems as well - I can type faster than the thing can handle. Tl;dr; how can you shift-select using remapped arrow keys under X?

  Read the article

• Using TrueCrypt with File Replication on Windows Server

  - by neildeadman

  We have a few folders that are set to replicate to a DR file server off-site. One of these folders contains a file that is a TrueCrypt volume container. When this file is mounted in TrueCrypt, the file won't replicate (fair enough!). I'm looking at alternatives to improve this situation. One solution I currently have is to have a scheduled task to unmount the volume and then every morning as the volume is needed, have someone mount it. This is a pain slightly because the password is known by a few people (I'm not one and neither are my colleagues who would be performing the mounting operation) so we'd need to continually get them to come over and type it in. The other I had was to have one TrueCrypt container on each server and replicate the contents when they are mounted. I wasn't able to get TrueCrypt to see the mounted volume so I guess this is a no go. Any other solutions I have missed or a fix for the above?

  Read the article

• How do I install and run Tomcat on port 80 as my only web server? (Rooted Ubuntu box)

  - by gav

  Hi All, tl;dr - I have a rooted linux box that I want to run tomcat on as a server (No Apache Web Server) how would you set this up avoiding common security pitfalls? I've written a Grails App that I want to run on a VPS I rent. The VPS has very little memory and I am using it for the sole purpose of running this application so I don't need the apache web server. This is my first venture into Server administration and I'm sure to fall into some well known traps. Should I use iptables to redirect requests from port 80 to 8080? Should I run tomcat as root or as it's own user? What configuration settings would be good for a low memory system expecting less than 10 concurrent users? Hopefully an easy one for you! Anyone who could link to a tutorial would be a personal hero destined for great things no doubt. Gav

  Read the article

• Bash & 'su' script giving an error "standard in must be a tty".

  - by sHz

  Folks, I'm having an issue with a bash script which runs a particular command as a different user. The background: Running on a Linux box (CentOS), the script is quite simple, its starting the hudson-ci application. declare -r HOME=/home/hudson declare -r RUNAS=hudson declare -r HOME=/home/hudson declare -r LOG=hudson.log declare -r PID=hudson.pid declare -r BINARY=hudson.war su - ${RUNAS} -c "nohup java -jar ${HOME}/${BINARY} >> ${HOME}/${LOG} 2>&1; echo $! > ${HOME}/${PID}" & This is the bridged version of the script, when run, the script exists with "standard in must be a tty". Any ideas on what I could be doing wrong? I've tried Dr Google and all the advise hasn't helped thus far.

  Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >