Search Results

Search found 1516 results on 61 pages for 'hex editors'.

Page 36/61 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

  • Map Caps-Lock to Control in Windows 8.1

    - by Eric Huang
    Before the Windows 8.1 update, I was able to map Caps-Lock to Controls through the type of registry tweak in this post: Remapping a keyboard key in windows 8.1 However, after updating to 8.1, my tweak no longer works. What I had done was Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Keyboard Layout] "Scancode Map"=hex:00,00,00,00,00,00,00,00,02,00,00,00,1d,00,3a,00,00,00,00,00 Windows 8.1 may have changed how it interprets the keyboard layout registry, I'm guessing. I'm an avid emacs user, so this problem is a life-or-death scenario for me.

    Read the article

  • Fix corrupt NTFS partition without Windows

    - by Capt.Nemo
    MY NTFS Partition has gotten corrupt somehow (it's a relic from the days when I had Windows installed). I'm putting the debug output of fdisk and blkid here. At the same time, any OS is unable to mount my root partition, which is located next to my NTFS partition. I'm not sure if this has anything to do with it, though. I get the following error while trying to mount my root partition (sda5) mount: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so ubuntu@ubuntu:~$ dmesg | tail [ 1019.726530] Descriptor sense data with sense descriptors (in hex): [ 1019.726533] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1019.726551] 1a 3e ed 92 [ 1019.726558] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 1019.726568] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 1a 3e ed 40 00 01 00 00 [ 1019.726584] end_request: I/O error, dev sda, sector 440331666 [ 1019.726602] JBD: Failed to read block at offset 462 [ 1019.726609] ata1: EH complete [ 1019.726612] JBD: recovery failed [ 1019.726617] EXT4-fs (sda5): error loading journal When I open gparted (using live CD), I get an exclamation next to my NTFS drive which states Is there a way to run chkdsk without using windows ? My attempt to run fsck results in the following : ubuntu@ubuntu:~$ sudo fsck /dev/sda fsck from util-linux-ng 2.17.2 e2fsck 1.41.14 (22-Dec-2010) fsck.ext2: Superblock invalid, trying backup blocks... fsck.ext2: Bad magic number in super-block while trying to open /dev/sda The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> Update : I was able to fix the NTFS partition running chkdsk off HBCD, but it seems that the superblock problem still remains. *Update 2: * Fixed superblock issue using e2fsck -c /dev/sda5

    Read the article

  • CD/DVD burn error in ImgBurn and Nero

    - by bobby
    I am getting the errors shown below when I try to burn a CD/DVD on my DVD writer. I am seeing this error for every CD/DVD I try to burn. I am not able to write any CDs or DVDs using ImgBurn. The burn log below is a failed burn in Nero. What could be causing this error? Nero Burning ROM bobby 4C85-200E-4005-0004-0000-7660-0800-35X3-0000-407M-MX37-**** (*) Windows XP 6.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.11.3. Internal Version: 7, 11, 3, (Nero Express) Recorder: <HL-DT-ST DVDRAM GSA-H12N> Version: UL01 - HA 1 TA 1 - 7.11.3.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default CD-ROM: <ATAPI-CD ROM-DRIVE-52MAX > Version: 52PP - HA 1 TA 0 - 7.11.3.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === === CDRom-Device-Map === ATAPI-CD ROM-DRIVE-52MAX F: CdRom0 HL-DT-ST DVDRAM GSA-H12N G: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 958MB (981560kB) Free physical memory: 309MB (317024kB) Memory in use : 67 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.6.2010 CD Image 10:43:02 AM #1 Text 0 File SCSIPTICommands.cpp, Line 450 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 10:43:02 AM #2 Text 0 File Burncd.cpp, Line 3186 HL-DT-ST DVDRAM GSA-H12N Buffer underrun protection activated 10:43:02 AM #3 Text 0 File Burncd.cpp, Line 3500 Turn on Disc-At-Once, using CD-R/RW media 10:43:02 AM #4 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 318783 ( 70:52.33) 10:43:02 AM #5 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 10:43:02 AM #6 Text 0 File DlgWaitCD.cpp, Line 2988 Recorder: HL-DT-ST DVDRAM G SA-H12N; CDR co de: 00 97 27 18; O SJ entry from: Pla smon Data systems Ltd. ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A ( LO 79:59.74) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 0 0 00 (invalid) 10:43:02 AM #7 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:43:02 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 785 Nero Report 1 Nero Burning ROM Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet) 2 indices, index0 (150) not provided original disc pos #0 + 318784 (318784) = #318784/70:50.34 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 318784 blocks [G: HL-DT-ST DVDRAM GSA-H12N] -------------------------------------------------------------- 10:43:02 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 986 Prepare [G: HL-DT-ST DVDRAM GSA-H12N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Se ssion Clo sed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next T rk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 6531768 32, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 -150 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 318784 | 318784 | 0x00 318784 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 10:43:02 AM #10 Text 0 File SCSIPTICommands.cpp, Line 240 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 10:43:02 AM #11 Text 0 File Burncd.cpp, Line 4286 Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB) 10:43:02 AM #12 Phase 24 File dlgbrnst.cpp, Line 1767 Caching of files started 10:43:02 AM #13 Text 0 File Burncd.cpp, Line 4405 Cache writing successful. 10:43:02 AM #14 Phase 25 File dlgbrnst.cpp, Line 1767 Caching of files completed 10:43:02 AM #15 Phase 36 File dlgbrnst.cpp, Line 1767 Burn process started at 48x (7,200 KB/s) 10:43:02 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2733 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:43:02 AM #17 Text 0 File MMC.cpp, Line 17806 StartDAO : CD-Text - Off 10:43:02 AM #18 Text 0 File MMC.cpp, Line 22488 Set BUFE: Buffer underrun protection -> ON 10:43:03 AM #19 Text 0 File MMC.cpp, Line 18034 CueData, Len=32 41 00 00 14 00 00 00 00 41 01 00 10 00 00 00 00 41 01 01 10 00 00 02 00 41 aa 01 14 00 46 34 22 10:43:03 AM #20 Text 0 File ThreadedTransfer.cpp, Line 268 Pipe memory size 83836800 10:43:16 AM #21 Text 0 File Cdrdrv.cpp, Line 1405 10:43:16.806 - G: HL-DT-ST DVDRAM GSA-H12N : Queue again later 10:43:42 AM #22 SPTI -1502 File SCSIPassThrough.cpp, Line 181 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1502) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Nero Report 2 Nero Burning ROM Sense Code: 0x08 Sense Qual: 0x03 CDB Data: 0x2A 00 00 00 4D 00 00 00 20 00 00 00 Sense Area: 0x70 00 04 00 00 00 00 10 53 29 A1 80 08 03 Buffer x0c7d9a40: Len x10000 0xDC 87 EB 41 6E AC 61 5A 07 B2 DB 78 B5 D4 D9 24 0x8D BC 51 38 46 56 0F EE 16 15 5C 5B E3 B0 10 16 0x14 B1 C3 6E 30 2B C4 78 15 AB D5 92 09 B7 81 23 10:43:42 AM #23 CDR -1502 File Writer.cpp, Line 306 DMA-driver error, CRC error G: HL-DT-ST DVDRAM GSA-H12N 10:43:55 AM #24 Phase 38 File dlgbrnst.cpp, Line 1767 Burn process failed at 48x (7,200 KB/s) 10:43:55 AM #25 Text 0 File SCSIPTICommands.cpp, Line 287 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:44:01 AM #26 Text 0 File Cdrdrv.cpp, Line 11412 DriveLocker: UnLockVolume completed 10:44:01 AM #27 Text 0 File SCSIPTICommands.cpp, Line 450 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon Nero Report 3

    Read the article

  • Is there any *good* HTML-mode for emacs?

    - by Carson Myers
    I love emacs, and I want to do my web-programming work in it, but I can't find a way to get it to edit HTML properly. I mean it's seriously awful. It will do HTML fine, but not PHP, javascript, etc. I tried getting html-helper-mode... I downloaded it, put it in /usr/local/share/emacs/site-lisp, and added it to my .emacs file: (autoload 'html-helper-mode "html-helper-mode" "Yay HTML" t) (setq auto-mode-alist (cons '("\\.html$" . html-helper-mode) auto-mode-alist)) copied and pasted from some site (I don't know elisp). it just, doesn't highlight anything at all. I tried downloading a whole bunch of modes and using some other mode to string them together, to no avail. Emacs is so great in every other way--why can't it do the simple task of editing web pages? I mean, it's a pretty standard thing to do for editors these days. So, does anyone know how to do this?

    Read the article

  • Trouble recovering MySQL InnoDB database after server crash

    - by Andy Shinn
    I had a server crash due to a broken iSCSI link (the filesystem went into read-only mode). After repairing the link and rebooting the machine (CentOS 5 / MySQL 5.1), the MySQL server would not start and gave the following error: 100603 19:11:46 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 100603 19:11:46 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... InnoDB: Warning: database page corruption or a failed InnoDB: file read of page 112541. InnoDB: Trying to recover it from the doublewrite buffer. InnoDB: Dump of the page: 100603 19:11:46 InnoDB: Page dump in ascii and hex (16384 bytes): lots of binary data 100603 19:11:46 InnoDB: Page checksum 953720272, prior-to-4.0.14-form checksum 2641912043 InnoDB: stored checksum 617821918, prior-to-4.0.14-form stored checksum 2080617765 InnoDB: Page lsn 115 2632899642, low 4 bytes of lsn at page end 2641594600 InnoDB: Page number (if stored to page already) 112541, InnoDB: space id (if created with = MySQL-4.1.1 and stored already) 0 InnoDB: Page may be an index page where index id is 0 616 InnoDB: Dump of corresponding page in doublewrite buffer: 100603 19:11:46 InnoDB: Page dump in ascii and hex (16384 bytes): more binary data 100603 19:11:46 InnoDB: Page checksum 908374788, prior-to-4.0.14-form checksum 824841363 InnoDB: stored checksum 912869634, prior-to-4.0.14-form stored checksum 2210927931 InnoDB: Page lsn 115 2635312169, low 4 bytes of lsn at page end 2633173354 InnoDB: Page number (if stored to page already) 112541, InnoDB: space id (if created with = MySQL-4.1.1 and stored already) 0 InnoDB: Page may be an index page where index id is 0 616 InnoDB: Also the page in the doublewrite buffer is corrupt. InnoDB: Cannot continue operation. InnoDB: You can try to recover the database with the my.cnf InnoDB: option: InnoDB: innodb_force_recovery=6 100603 19:11:46 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended Per the error message, I have tried setting set-variable=innodb_force_recovery=6 in the my.cnf to get to the data. This allows the MySQL server to start. But when I try to do a mysqldump of the database or a SELECT * INTO OUTFILE "filename" FROM broken_table; it seems to endlessly just export the same line over and over again. I have also tried http://code.google.com/p/innodb-tools/. But this tool fails with an error that 'blob' type is not supported. If I try to access the data using the PHP application it crashes MySQL: `100603 19:19:19 - mysqld got signal 11 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8384512 read_buffer_size=131072 max_used_connections=2 max_threads=151 threads_connected=2 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 338317 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x15d33f0 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x453aff00 thread_stack 0x40000 /usr/libexec/mysqld(my_print_stacktrace+0x24) [0x874364] /usr/libexec/mysqld(handle_segfault+0x346) [0x5c9166] /lib64/libpthread.so.0 [0x3a6e40eb10] /usr/libexec/mysqld(rec_get_offsets_func+0x30) [0x7cc310] /usr/libexec/mysqld [0x7674d8] /usr/libexec/mysqld(btr_search_info_update_slow+0x638) [0x768d48] /usr/libexec/mysqld(btr_cur_search_to_nth_level+0xc7d) [0x75f86d] /usr/libexec/mysqld [0x7dd1c1] /usr/libexec/mysqld(row_search_for_mysql+0x18b0) [0x7e03d0] /usr/libexec/mysqld(ha_innobase::general_fetch(unsigned char*, unsigned int, unsigned int)+0x7c) [0x7526fc] /usr/libexec/mysqld(handler::read_multi_range_next(st_key_multi_range**)+0x29) [0x6aed09] /usr/libexec/mysqld(QUICK_RANGE_SELECT::get_next()+0x194) [0x69a964] /usr/libexec/mysqld [0x6aafe9] /usr/libexec/mysqld(sub_select(JOIN*, st_join_table*, bool)+0x56) [0x635196] /usr/libexec/mysqld [0x63f9cd] /usr/libexec/mysqld(JOIN::exec()+0x950) [0x6497c0] /usr/libexec/mysqld(mysql_select(THD*, Item*, TABLE_LIST*, unsigned int, List&, Item*, unsigned int, st_order*, st_order*, Item*, st_order*, unsign ed long long, select_result*, st_select_lex_unit*, st_select_lex*)+0x17b) [0x64b34b] /usr/libexec/mysqld(handle_select(THD*, st_lex*, select_result*, unsigned long)+0x169) [0x64bc79] /usr/libexec/mysqld [0x5d34b6] /usr/libexec/mysqld(mysql_execute_command(THD*)+0x4e5) [0x5d6b45] /usr/libexec/mysqld(mysql_parse(THD*, char const*, unsigned int, char const)+0x211) [0x5dc321] /usr/libexec/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x10b8) [0x5dd3f8] /usr/libexec/mysqld(do_command(THD*)+0xe6) [0x5dd9e6] /usr/libexec/mysqld(handle_one_connection+0x73d) [0x5d036d] /lib64/libpthread.so.0 [0x3a6e40673d] /lib64/libc.so.6(clone+0x6d) [0x3a6d4d3d1d] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd-query at 0x15de5e0 = SELECT DISTINCT count(DISTINCT i.itemid) as rowscount,i.hostid FROM items i WHERE ((i.itemid BETWEEN 000000000000000 AND 0999999 99999999)) AND i.type<9 AND (i.hostid IN (10017,10047,10050,10054,10056,10059,10062,10063,10064,10065,10066,10067,10068,10069,10070,10071,10072,10073,100 74,10075,10076,10077,10078,10079,10080,10081,10082,10084,10088,10089,10090,10091,10092,10093,10094,10095,10096,10097,10098,10099,10100,10101,10102,10103,10 104,10105,10106,10107,10108,10109)) GROUP BY i.hostid thd-thread_id=3 thd-killed=NOT_KILLED The manual page at contains information that should help you find out what is causing the crash. 100603 19:19:19 mysqld_safe Number of processes running now: 0 100603 19:19:19 mysqld_safe mysqld restarted` Before recovering form an older backup as a last resort I am looking for anymore suggestions. Thanks!

    Read the article

  • Swithing from Windows to Mac OSX - Application recommendations

    - by roosteronacid
    My new Macbook Pro 13" notebook should arrive this monday. And I can't wait! I am a long (looong) time Windows user. And after a good week of researching, I am still somewhat in the dark as far as which applications are "must-haves" on Mac OSX. I would be very greatful if you guys would recommend your favorite applications. I'm looking for recommendations in the following categories... General use applications: File-compression applications, peer-to-peer applications, CD/DVD ripping/burning applications, messaging applications, etc. Web-development applications: Code editors, graphic design applications, and everything in between Must-have-cannot-live-without applications: Things like Growl and other applications that live within Mac OSX's preference panel Virtiualization applications: VMware Fusion, Parallels, etc.

    Read the article

  • Monitor for HD video editing

    - by Kato
    I have been researching for days and nights on a good monitor to buy for a Mac Pro with an ATI Radeon 2600 XT (256mb). It will be used extensively for HD video editing (1080p) and photo editing, and likely also digital/3D animation next year(a lot of FCP + CS4). I am a student, so money is a little bit of an issue, but I want something that I'll be able to use semi-professionally after I'm done school, and am willing to finance something if it is worth the cost. I'm HOPING for something under $1000 though. The IPS Ultrasharps from Dell seem to be getting good reviews from other video editors. Accurate colour correction is a concern for me (hopefully something that covers Adobe spectrum), as well as a decent response time, HD resolutions, and DVI port. Also something with good gradient/definition in black areas, as this is difficult for editing on most LCDs. 1X1 pixel, brightness, good DVD playback etc. Hopefully this is not impossible to find for under $2000!

    Read the article

  • Basic video editor for AVCHD Lite files?

    - by davr
    I have a camera (Panasonic Lumix GF-1) that outputs "AVCHD Lite" files, 720p h264 in a MTS container. I saw this question that said Movie Maker in Windows 7 supports AVCHD...but I just tried, and unfortunately it does not support AVCHD Lite. Are there any free or inexpensive non-linear video editors (NLE) that can natively handle AVCHD Lite files, without requiring some 3rd party driver? If not, are there any 3rd party drivers that are especially stable? (In my experience they usually have some problems...I got AVCHD Lite loading into VirtualDub using a 3rd party plugin, but it's very slow and sometimes crashes, and seeking takes ages.

    Read the article

  • Collision detection on a 2D hexagonal grid

    - by SundayMonday
    I'm making a casual grid-based 2D iPhone game using Cocos2D. The grid is a "staggered" hex-like grid consisting of uniformly sized and spaced discs. It looks something like this. I've stored the grid in a 2D array. Also I have a concept of "surrounding" grid cells. Namely the six grid cells surrounding a particular cell (except those on the boundries which can have less than six). Anyways I'm testing some collision detection and it's not working out as well as I had planned. Here's how I currently do collision detection for a moving disc that's approaching the stationary group of discs: Calculate ij-coordinates of grid cell closest to moving cell using moving cell's xy-position Get list of surrounding grid cells using ij-coordinates Examine the surrounding cells. If they're all empty then no collision If we have some non-empty surrounding cells then compare the distance between the disc centers to some minimum distance required for a collision If there's a collision then place the moving disc in grid cell ij So this works but not too well. I've considered a potentially simpler brute force approach where I just compare the moving disc to all stationary discs at each step of the game loop. This is probably feasible in terms of performance since the stationary disc count is 300 max. If not then some space-partitioning data structure could be used however that feels too complex. What are some common approaches and best practices to collision detection in a game like this?

    Read the article

  • ArchBeat Link-o-Rama for December 13, 2012

    - by Bob Rhubart
    Key Takeaway Points and Lessons Learned from QCon San Francisco 2012 | Abel Avram Abel Avram's InfoQ article "summarizes the key takeaways from QConSF 2012, including blog entries written by editors and practitioner attendees for all keynotes, tracks and sessions along with aggregated twitter feedback during the event." Pick Bex's Deep Dive Talk for Collaborate 2013 | Bex Huff Bezzotech, Oracle ACE Director Bex Huff's outfit, is presenting a two-hour deep-dive session on ECM at Collaborate 13 in Denver in April. You can help to determine the focus of that session by submitting your ideas directly to Bex. Get the details in his blog post. E2.0 Workbench Podcast 10 – EBS Order Entry with Webcenter via BPEL and SOA Gateway | John Brunswick John Brunswick's latest E2.0 Workbench video tutorial illustrates how to "create a custom service, create a BPEL process that interacts with it and brokers authentication to the SOA Gateway, and finally consume the BPEL service in WebCenter to allow end users to place simple orders via an extranet. Oracle Fusion Middleware Security: Password Policy in OAM 11g R2 | Rob Otto Rob Otto continues the Oracle Fusion Middleware A-Team "Oracle Access Manager Academy" series with a detailed look at OAM's ability to support "a subset of password management processes without the need to use Oracle Identity Manager and LDAP Sync." Thought for the Day "Smart data structures and dumb code works a lot better than the other way around." — Eric Raymond Source: SoftwareQuotes.com

    Read the article

  • The lifecycle of "cool"

    - by Dori
    I've been thinking lately about how some programming projects/products become "cool," and in particular, how that trend can later reverse. Here are two examples that might better explain my context: Textmate Whenever someone asks about text editors on OS X, the answer on the SE sites is an automatic "Textmate!" But looked at objectively: Textmate 1.0 shipped October 2004 Textmate 1.5 shipped January 2006 Textmate 2 was announced February 2006 As of September 2010, the currently shipping version is 1.5.9 In all of 2010, there have been a total of three posts on the Textmate blog At what point (if ever) do Textmate fans start thinking about switching to another text editor? When it breaks after some future Apple update? When alpha geeks they respect start recommending something else? Or? jQuery Whenever a JavaScript-related question is asked on the SE sites, the knee-jerk response is "jQuery!" I've seen it happen even when the question itself only required a single line of JavaScript. Or when the question could be better answered by using CSS. Do the answerers understand they're suggesting a blowtorch to light a candle? That they're recommending adding 70K or so of code to do something trivial? Or is it a symptom of "When you have a hammer, everything looks like a nail"—that is, jQuery is all they know how to do, so that's their recommendation? And do they understand that while they may know jQuery well, that doesn't necessarily mean that they know JavaScript? Is there a way to explain that learning JavaScript would make them better jQuery programmers? My bigger-picture questions: Is this niche focus primarily a trait of programmers? How do you get programmers to not immediately jump to recommending their personal favorites? What can motivate programmers to review their initial selection criteria and possibly modify their choice? Your thoughts?

    Read the article

  • Google Chrome app file opened is not always in front, receiving focus

    - by Philipp Lenssen
    On Windows Vista, I'm launching files associated with a Google Chrome "Application Shortcut" app by double-clicking them. While they will always open this way, they will sometimes not receive focus -- i.e. they sit in the task bar quietly but don't actually show in front on the screen (until I click on the app in the task bar again). Does anyone know how I can force the just-opened app to receive focus? The app being opened actually contains a web app I can customize, so I also have access to performing JavaScript commands post-startup. For background information, here is the regedit file I originally used to create the file association. Might well be this is a Google Chrome internal issue... apps I open with other editors get their focus alright, AFAIK. Thanks!

    Read the article

  • Proffesional video editor that can handle FLV?

    - by acidzombie24
    I tried Adobe Premiere Pro CS3 and was not able to open my file (unsupported format). Media player can open it thanks to ffdshow (tryouts IIRC). Premiere doesnt seem to want to use ffdshow. I tried renaming it to AVI and hoped Premiere would open it via ffdshow but it didnt and i checked and disabled the dont use ffdshow option in ffdshow video decoder option. What is a good proffesional video editor that can handle FLV? All ffmpeg based editors died on it and virtualdub got close but had a bad framerate. Probably bc it didnt know it was a streaming vid and the start is 26mins of 31min video. More info here but what can i use to open and properly convert flv video http://superuser.com/questions/50779/windows-media-based-video-audio-converter

    Read the article

  • Where can I find out the following info on python (coming from Ruby)

    - by Michael Durrant
    I'm coming from Ruby and Ruby on Rails to Python. Where can I find or find resources about: The command prompt, what is python's version of 'irb' django, what is a good resource for installing, using, etc. pythoncasts... is there anything like railscats, i.e. good video tutorials web sites with the api info about what version have what and which to use. info and recommendations on editors, plugins and IDE's common gotchas for newbies and good things to know at the outset scaling issues, common reasons what is the equivalent of 'gems', i.e. components I can plug in what are popular plugins for django authentication and forms similar to devise and simple_form testing, what's available, anything similar to rspec? database adapters - any preferences? framework info - is django MVC like rails? OO'yness. Is everything an object that gets send messages? Different paradign? syntax - anything like jslint for checking for well-formed code?

    Read the article

  • Convert mkv to mp4 with ffmpeg

    - by JohnS
    When I try converting mkv to mp4 using ffmpeg, the following error occurs: [ipod @ 0x16fa0a0] Application provided invalid, non monotonically increasing dts to muxer in stream 0: -2 = -2 av_interleaved_write_frame(): Invalid argument I used this command to convert the file: ffmpeg -i input.mkv -vcodec copy -acodec copy -absf aac_adtstoasc output.m4v The input file has the following characteristics: mediainfo input.mkv General Unique ID : 200459305952356554213392832683163418790 (0x96CF0ED8DB5914CBB9E18163689280A6) Complete name : input.mkv Format : Matroska Format version : Version 2 File size : 1.46 GiB Duration : 1h 5mn Overall bit rate : 3 168 Kbps Encoded date : UTC 2010-09-26 21:44:02 Writing application : mkvmerge v2.9.5 ('Tu es le seul') built on Jun 17 2009 16:28:30 Writing library : libebml v0.7.8 + libmatroska v0.8.1 Video ID : 1 Format : AVC Format/Info : Advanced Video Codec Format profile : [email protected] Format settings, CABAC : Yes Format settings, ReFrames : 4 frames Codec ID : V_MPEG4/ISO/AVC Duration : 1h 5mn Bit rate : 2 910 Kbps Width : 1 280 pixels Height : 720 pixels Display aspect ratio : 16:9 Frame rate : 25.000 fps Color space : YUV Chroma subsampling : 4:2:0 Bit depth : 8 bits Scan type : Progressive Bits/(Pixel*Frame) : 0.126 Stream size : 1.31 GiB (90%) Writing library : x264 core 105 r1724 b02df7b Encoding settings : cabac=1 / ref=3 / deblock=1:0:0 / analyse=0x3:0x113 / me=hex / subme=6 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=0 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=0 / chroma_qp_offset=-2 / threads=18 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=1 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=0 / keyint=250 / keyint_min=25 / scenecut=40 / intra_refresh=0 / rc=2pass / mbtree=0 / bitrate=2910 / ratetol=1.0 / qcomp=0.60 / qpmin=10 / qpmax=51 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / ip_ratio=1.40 / pb_ratio=1.30 / aq=1:1.00 Default : Yes Forced : No Audio ID : 2 Format : AC-3 Format/Info : Audio Coding 3 Mode extension : CM (complete main) Codec ID : A_AC3 Duration : 1h 5mn Bit rate mode : Constant Bit rate : 256 Kbps Channel(s) : 2 channels Channel positions : Front: L R Sampling rate : 48.0 KHz Bit depth : 16 bits Compression mode : Lossy Stream size : 121 MiB (8%) Language : English Default : Yes Forced : No Being new to ffmpeg, I'm not sure what the error means or how to correct it. Thanks!

    Read the article

  • Is there a "Run Level Configurator" for Windows XP?

    - by djangofan
    I have been having trouble with something causing my Windows XP system to take 6-8 minutes to startup from a cold boot. Something is happening during startup that is causing the system to crawl. I have a lot of Linux experience , especially configuring run levels so that some programs start before others do. I also know how to do that on Windows XP but its really complex, and with 50 services I'd have to keep a giant spreadsheet to keep it all organized. Is there such a thing as a Windows XP Tool that "emulates" the Linux run-level editors that I can use to control the order than services start on my system?

    Read the article

  • Are You Using Facebook with an Encrypted Session Yet?

    - by The Geek
    If you’re geeky and keep up with all the tech news, you probably already know that Facebook added an SSL feature, but for everybody else: You can make your Facebook profile more secure by turning this option on, and here’s how to do it. All we’re going to do is head into the Facebook profile settings and then check a box that forces the use of SSL encryption whenever possible. Easy Latest Features How-To Geek ETC Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The How-To Geek Valentine’s Day Gift Guide Inspire Geek Love with These Hilarious Geek Valentines RGB? CMYK? Alpha? What Are Image Channels and What Do They Mean? Project M Brings Classic Super Smash Bro Style Gameplay to the Wii Now Together and Complete – McBain: The Movie [Simpsons Video] Be Creative by Using Hex and RGB Codes for Crayola Crayon Colors on Your Next Web or Art Project [Geek Fun] Flash Updates; Finally Supports Full Screen Video on Multiple Monitors 22 Ways to Recycle an Altoids Mint Tin Make Your Desktop Go Native with the Tribal Arts Theme for Windows 7

    Read the article

  • Changing file extension associations

    - by ldigas
    What is the easiest way to permanently change association (program which opens etc.) for several file extensions at once? What I mean? Let's say you used TextEditorUncool up until now to open txt, dat, bat and abc files. Now you got TextEditorReallyCool and you wish if there was an application which on the left had a name of the program, and on the right a list of file extensions associated with it (which it, let's say, opens). Is there such a thing? Usually programs change this thing during installation (some even ask before), but in the case of portable programs one usually has to do it by hand, and for editors which open a gazillion of different file extensions, it gets tiresome really fast. All ideas welcomed !

    Read the article

  • Octree implementation for fustrum culling

    - by Manvis
    I'm learning modern (=3.1) OpenGL by coding a 3D turn based strategy game, using C++. The maps are composed of 100x90 3D hexagon tiles that range from 50 to 600 tris (20 different types) + any player units on those tiles. My current rendering technique involves sorting meshes by shaders they use (minimizing state changes) and then calling glDrawElementsInstanced() for drawing. Still get solid 16.6 ms/frame on my GTX 560Ti machine but the game struggles (45.45 ms/frame) on an old 8600GT card. I'm certain that using an octree and fustrum culling will help me here, but I have a few questions before I start implementing it: Is it OK for an octree node to have multiple meshes in it (e.g. can a soldier and the hex tile he's standing on end up in the same octree node)? How is one supposed to treat changes in object postion (e.g. several units are moving 3 hexes down)? I can't seem to find good a explanation on how to do it. As I've noticed, soting meshes by shaders is a really good way to save GPU. If I put node contents into, let's say, std::list and sort it before rendering, do you think I would gain any performance, or would it just create overhead on CPU's end? I know that this sounds like early optimization and implementing + testing would be the best way to find out, but perhaps someone knows from experience?

    Read the article

  • Mouse cursor in Terminal?

    - by marienbad
    I use Mac OS X Terminal.app. But the answer to this would probably apply to any typical UNIX-ish terminal emulator in a graphical environment. Question -- what do I do to: Use my mouse cursor to click on a character-position in the current line of the terminal, and have the terminal's cursor jump to that spot? Typically, you have to hold down an arrow key to move to the correct cursor position. If you're pasting in a long string of text at the shell prompt, or working in an editor like VI, this can take a long time. I know editors have other navigation keys like jump-words, but I like my mouse cursor.

    Read the article

  • How do I encrypt but share a number of folders?

    - by d3vid
    I want to achieve the following functionality. Is it possible? Boot up computer (possibly via WakeOnLan or WakeOnPlan). Either be automatically logged in, or log in via login screen, or log in remotely. I change this behavior occasionally, so full disk encryption wouldn't work for me because it requires a password on bootup (which would it would prevent the remote bootup options, and the automatic login option). I am only interested in encrypting data, not the entire harddrive. Once logged in either: a launcher/tray icon is available to launch encryption app (preferred) run encryption app from the dash Prompted to unlock encrypted folder(s) individually. Unlocked folders are available to: me, apps I am running (e.g. editors, SpiderOak) Ideally, folders that I share with bindfs can be locked/unlocked by other users too. A key point is that once I have unlocked an encrypted folder, I don't want to have to think about it again. I currently achieve this via TrueCrypt (except for the last part). Unfortunately TrueCrypt isn't well integrated with Ubuntu (licensing issues prevent Debian from including it in their repo, the interface isn't quite integrated with Unity, setting it as a startup app doesn't quite work, sharing encrypted folders isn't really part of its design). Is there an alternative to TrueCrypt that is better integrated with the Ubuntu GUI and would suit this workflow?

    Read the article

  • Unit test SHA256 wrapper queries

    - by Sam Leach
    I am just beginning to write unit tests. So please bear with me. I have the following SHA256 wrapper. public static string SHA256(string plainText) { StringBuilder sb = new StringBuilder(); SHA256CryptoServiceProvider provider = new SHA256CryptoServiceProvider(); var hashedBytes = provider.ComputeHash(Encoding.UTF8.GetBytes(plainText)); for (int i = 0; i < hashedBytes.Length; i++) { sb.Append(hashedBytes[i].ToString("x2").ToLower()); } return sb.ToString(); } Do I want to be testing it? If so, what do you recommend? My thought process is as follows: What logic is there here. The answer is my for loop and ToString("x2") so from my understanding I want to be testing this part? I can assume Encoding.UTF8.GetBytes(plainText) works. Correct assumption? I can assume SHA256CryptoServiceProvider.ComputeHash() works. Correct assumption? I want to be only testing my logic. In this case is limited to the printing of hex encoded hash. Correct? Thanks.

    Read the article

  • Installation of Tex Live via the terminal 12.04

    - by user74713
    I need to install upstream version of TeX Live for 12.04 to edit the manual for Ubuntu. I am having a difficult time installing it per the directions @ http://ubuntu-manual.org/getinvolved/editors#install-texlive. TeX Live documents are on my computer, but I am not able to run the install. No TeX Live program found on my computer. Any help is greatly appreciated! ~Thanx!~ Hello, my name is Chris. I am a student pursuing a career in technical writing. I would like to assist the Ubuntu community while gaining experience & building my resume. Below I have listed the prior attempts & links to view the posts of each attempt: Backports I have tried using the official backports of the latest (2012) TeX-Live via their PPA. Please refer to link below for the particulars. How do I install the latest 2012 TeX Live on 12.04? Latex I've also tried running Latex as suggested. Please refer to link below for the particulars. http://ubuntuforums.org/showthread.php?t=2019051 PPA Causing Issue?? or something else I came across a post concerning the ability to install programs via the terminal and am wondering if it may be my problem??? Please refer to link below for the particulars. PPA - TeX Live Cannot install anything through Terminal - apt-get -f install

    Read the article

  • Is there an offline HTML editor for writers?

    - by Jason Christa
    All of our writers and editors use Microsoft Word for document creation and a lot of what they create ends up on the Web. Is there a good offline editor with a flavor similar to Word that they could use to create their documents. Styling of the content should not be a concern, only producing semantic HTML (most documents they create could be done using only header and paragraph tags for instance). They have tried CKEditor and TinyMCE but it is still too foreign for them and it is online so they don't trust it not to lose their work.

    Read the article

  • Location of Opera cookies set to expire after restart (time 0)

    - by marc
    Where does Opera store cookies that are destroyed or expire after the browser is restarted? I'm looking for information on where these temporary cookies, with time expire (0), and that are deleted after a browser restart. I tested a file "cookies4.dat" using a hex editor and it doesn't have the temporary cookies stored inside. Does Opera create a temporary file for these cookies and delete them after restart? If that was so, where are they? Or does it store them in RAM?

    Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >