Search Results

Search found 26189 results on 1048 pages for 'linux guy'.

Page 36/1048 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

• Is there anything that can be done to make X forwarding over LAN less painful?

  - by Earlz

  I have two *nix machines that I like to remotely do graphical things sometimes with. One of those machines is my Arch Linux media server, and another is my OpenBSD router/general server. My current task was installing a Windows XP over virtual box on my media server. I preferred to do the installation from my main workstation so that I could continue to watch TV from my media server on it's "actual" display. I soon noticed that X forwarding is quite painful though, even over low-latency LAN connections. Are there any settings I can tweak to make it a bit less painfully slow, jittery, and laggy? My LAN is rather small, 100Mbit, and ping times to the other box average at about 0.15ms. Also, I know Virtualbox has a VNC mode it can use instead of doing X forwarding, but this particular task was just an example

  Read the article

• Development environment for embedded system

  - by Howard Lee Harkness

  I need to develop software in C/C++ for an embedded system. I have Debian 6 running off of a USB hard drive. I would like to be able to generate a stripped-down kernel with modules, and install them either on a CF card or a USB 'thumb' drive. I succeeded in building a Linux 3.6 kernel and running it in Debian off of the USB hard drive, but I am having trouble figuring out how to install it on the thumb drive. I would like a build cycle that looks like this: 1) Build module or kernel with desired software 2) Install it on thumb drive 3) Boot and test I would like to use the same system for both development and testing, if that is feasible. I am looking for resources and tutorials that would help me understand how to do this.

  Read the article

• Why does VNC eat certain characters?

  - by TK Kocheran

  I often use VNC to connect to my desktop upstairs using a laptop downstairs over my home network. I tunnel the VNC connection via SSH. The problem I keep running into is that I'll attempt to type a ! or a : or even a captial A and it will come across the wire as a 1, ;, or a respectively. Is this something I can fix? It's really REALLY annoying while one is programming to have to pop open character map and find a colon and copy/paste it in each time. Running Ubuntu 10.04 upstairs, Linux Mint 10 downstairs.

  Read the article

• Install multiple Linux OS using WUBI

  - by soul

  I want to install Linux Mint, and Ubuntu on my laptop using Wubi installation. I already installed Ubuntu, but when I launch the Wubi installer for Mint. I got this guy: Does it mean to say that I can only install one os using the wubi? Do you know of any solution to this problem, except by installing mint using the usual way. I have XP and Windows 7 installed on the machine. That's why I'm using Wubi so that I won't get into troubles.

  Read the article

• client subscribed to a multicast group not receiving data

  - by Abruzzo Forte e Gentile

  I have a network that was setup for multicast traffic IN Machine A there is a server application generating multi-cast traffic. I have also different clients subscribing to that mulicast traffic -some client are in the same machine A -other clients are in machine B,C,D # Address I am using IP : 239.193.0.21 PORT: 20401 I don't know why but the client in machine A , even if they join the group, don't receive any data while (and this is the funny part) machine B,C and D receive everything. Checking with Wirshark I can see that the UDP traffic flow is there in Machine A. I am using LInux/Red-Hat Enterprise 6.2 What should I look at? Any setting in the os? Firewall or what?

  Read the article

• Is it worth moving from Microsoft tech to Linux, NodeJS & other open source frameworks to save money for a start-up?

  - by dormisher

  I am currently getting involved in a startup, I am the only developer involved at the moment, and the other guys are leaving all the tech decisions up to me at the moment. For my day job I work at a software house that uses Microsoft tech on a day to day basis, we utilise .NET, SqlServer, Windows Server etc. However, I realise that as a startup we need to keep costs down, and after having a brief look at the cost of hosting for Windows I was shocked to see some of the prices for a dedicated server. The cheapest I found was £100 a month. Also if the business needs to scale in the future and we end up needing multiple servers, we could end up shelling out £10's of £000's a year in SQL Server / Windows Server licenses etc. I then had a quick look at the price of Linux hosting for a dedicated server and saw the price was waaaaaay lower than windows hosting. One place was offering a machine with 2 cores for less than £20 a month. This got me thinking maybe the way to go is open source on Linux. As I write a lot of Javascript at work (I'm working on a single page backbone app at the moment), I thought maybe NodeJS and a web framework like Express would be cool to use. I then thought that instead of using SQL why not use an open source NoSQL database like MongoDB, which has great support on NodeJS? My only concern is that some of the work the application is going to do is going to be dynamically building images and various other image related stuff, i.e. stuff that is quite CPU heavy - so I'm thinking of maybe writing anything CPU heavy in C++ and consuming it as a module in Node. That's the background - but basically is Linux a good match for: Hosting a NodeJS/Express site? Compiling C++ node modules? Using a NoSQL DB like MongoDB? And is it a good idea to move to these unfamiliar technologies to save money?

  Read the article

• What is the best way to back up dedicated web server? (Amanda versus Rsync)

  - by Scott

  Hello everyone, I am trying to establish valid back ups for my web server. It is a linux box on CentOS. I have asked around and "rsync" was suggested by some of the server fault community. However, my coworker at work says that this is really only moving over the physical files and isn't really a usable "snapshot." He suggested using "amanda" and that this did full server snapshots that are more what I am accustomed to. I know at my company we have virtual machines that we take snapshots of and we can restore everything back to just as they were with little effort and little downtime. Is this possible with rsync? Or would I need to create a new server and then migrate the files back and do various configurations? I think I prefer being able to just reset everything to a point in time. Forgive my ignorance, Back ups are something that I have never really had to worry about before.

  Read the article

• apt - Remove not configured package

  - by madflow

  I have a Linux-Mint Debian Edition System. When I install sendmail I get an infinite loop. Reading configuration from /etc/mail/sendmail.conf. Validating configuration. Creating /etc/mail/databases... Reading configuration from /etc/mail/sendmail.conf. Validating configuration. Creating /etc/mail/databases... When I try dpkg --configure -a it is the same. Now I want to simple remove sendmail from the installation queue - but I can't simply do that, because apt-get always wants to configure sendmail first. Is there a way to force apt-get to remove sendmail or set it to "configured" - even though the package is not properly configured?

  Read the article

• Badwidth-Hogging Linux Server Causing Trouble

  - by BlairHippo

  We have a Linux server (2.6.28-11-generic #42-Ubuntu) that's misbehaving on a client site, gobbling up an entirely unacceptable percentage of the client's bandwidth, and we're trying to figure out what the heck it's doing. And the guy who had the sysadmin skillset has yet to be replaced. We're at a loss for what could be causing all that network traffic, and need to figure it out SOON. What log files should I be looking at to find this information? What analysis tools would you recommend for this task? Please note that I'm not looking for a tool that will allow me to analyze FUTURE traffic. The client is on the verge of shutting the machine off entirely; I need to figure out what it's been doing with the data I already have, if that's at all possible. My thanks in advance for helping a development monkey play sysadmin.

  Read the article

• Using iptables to block ALL outgoing traffic from one NIC?

  - by edanfalls

  Hi, I must pretty bad at Googling as this seems like a very basic question but I can't seem to find the answer anywhere... and man iptables is a very long read! I have two NICs - eth0 and eth1 - on a linux box and I want to block ALL outbound traffic (TCP and UDP across all ports) from one of the NICs, so that no traffic makes its way back up to the router. What is the command for this? I have only seen examples with specific ports. Thanks in advance.

  Read the article

• One way sync with either Dropbox or Google drive on linux and windows

  - by sup

  I could not google this one. I would like to use Dropbox or Google drive only as backup, so I would like to ensure I only upload to those services and never download (unless done manually via the web interface). There would be several of us uploading stuff to one account, so we would need to ensure we don't accidentaly delete something on another guy's machine by doing some changes on our local machine. Is there a simple way to do this automatically - i.e. by running a daemon that will upload eveyuthing in a given folder but never download anything? I am on linux, so that complicates things a bit, but I am also interested in windows solutions.

  Read the article

• What is stable as Ubuntu in kernel space, but also cutting-edge as Fedora in user land?

  - by HRJ

  I am a long time Fedora user (since Fedora 6). Previously I have used Gentoo (for 2 years) and Slackware (for 5 years). The thing I liked about Fedora is frequency of package updates + great community. But lately I have noticed that Fedora is becoming too cutting-edge, nay, bleeding-edge. They changed the DNS client to be strict, without any warning, which broke some of their own packages for two Fedora releases. More critically, their LVM modules are not compatible across Fedora 12, 13, 14 (sometimes). Ubuntu is nicely polished but seems too stable for my liking. Some of the user-space applications are two major version numbers behind (even in testing or unstable or whatever they call it). Is there any Linux distro that has the stability of Ubuntu in kernel space and the bleeding edge in applications (especially harmless applications like, say, Stellarium)?

  Read the article

• Essential topics to be discussed in Linux 101

  - by zengr

  Hi, We are organizing a Linux 101 Workshop for undergrad and grad students. Can you share some ideas/topics that are must for people who are just starting with Linux. Preconditions: No knowledge of Linux OS, philosophy and technical aspects (kernel, shell, commands) Post conditions: A basic crash course of Linux which will give them a good start and answer some basic questions asked on it.

  Read the article

• creating a .sh file programmatically under windows and running it on a linux system from cygwin

  - by user1296193

  i want to write program, in windows, which will write a .sh file, then connect to a linux machine via cygwin and ssh, and execute that .sh file. I've had to use dos2unix to convert .sh files that I created in windows to run under linux. Obviously if I am executing a script with ssh it will have to be linux formatted to work. so I need to know how to create a linux appropriate .sh file using c or openoffice basic or vBA. thanks!

  Read the article

• Linux - specific API reference

  - by Goofy

  Hello! Where can I find centralized and complete documentation aboput Linux - specific API? I'm preparing Linux port of my application and i want to use as much Linux - specific features as it's possible. So far I found that Linux provide epoll and inotify API, which are great news for me, because my program works as network server and monitor local file systems.

  Read the article

• Windows service porting to linux

  - by Sirish Kumar

  I am porting an application which runs as a background service in windows at startup, we are porting the application to linux(SUSE Enterprise server), I'am completely new to linux. Can somebody help me on how to proceed with this. Like Should I build the linux executable After builiding the binary, what changes should I make to linux startup files to run this executable How my service can register call back function to modify or change or send commands to my service while it is running

  Read the article

• Linux bcm43224 wifi adapter slows down a couple minutes after boot

  - by Blubber

  I just installed Ubuntu on my mid 2012 MacBook Air. Everything worked out of the box, but the wifi is showing some weird behavior. When I first login it's really fast, loading google.com is near instant, and browsing in general feels at least as smooth as it did on Mac OS. However, after a couple minutes the connection slows down dramatically, sometimes it takes over 5s to load google.com, a simple reboot fixes the problem for another couple minutes. Specs: Wifi: 02:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01) Driver: open-source brcmsmac driver Kernel: Linux wega 3.8.0-21-generic #32-Ubuntu SMP Tue May 14 22:16:46 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux Distro: Ubuntu 13.04 (uptodate) I tried a number of things, none of which actually helped Use proprietary sta driver from broadcom Installed firmware into /lib/firmware/brcms (which, as far as I can tell from logs, does not get loaded at all) Switch router to only use 2.4 OR 5 GHz Set router to only use a OR g OR n Set router to use AES encryption only Turned off power management on the adapter Set regulatory region to the correct value (NL) on both router and laptop Disable ipv6 Nothing seems to help, the slowdown always occurs. I did notice that the latency (ping google.com) stays roughly the same (around 9ms). Below is some more information that might be of use. $ lspci -nnk | grep -iA2 net 02:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n [14e4:4353] (rev 01) Subsystem: Apple Inc. Device [106b:00e9] Kernel driver in use: bcma-pci-bridge $ rfkill list 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no $ lsmod Module Size Used by dm_crypt 22820 1 arc4 12615 2 brcmsmac 550698 0 coretemp 13355 0 kvm_intel 132891 0 parport_pc 28152 0 kvm 443165 1 kvm_intel ppdev 17073 0 cordic 12574 1 brcmsmac brcmutil 14755 1 brcmsmac mac80211 606457 1 brcmsmac cfg80211 510937 2 brcmsmac,mac80211 bnep 18036 2 rfcomm 42641 12 joydev 17377 0 applesmc 19353 0 input_polldev 13896 1 applesmc snd_hda_codec_hdmi 36913 1 microcode 22881 0 snd_hda_codec_cirrus 23829 1 nls_iso8859_1 12713 1 uvcvideo 80847 0 btusb 22474 0 snd_hda_intel 39619 3 videobuf2_vmalloc 13056 1 uvcvideo snd_hda_codec 136453 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_cirrus bcm5974 17347 0 bluetooth 228619 22 bnep,btusb,rfcomm snd_hwdep 13602 1 snd_hda_codec lpc_ich 17061 0 videobuf2_memops 13202 1 videobuf2_vmalloc videobuf2_core 40513 1 uvcvideo videodev 129260 2 uvcvideo,videobuf2_core bcma 41051 1 brcmsmac snd_pcm 97451 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel snd_page_alloc 18710 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 snd_seq_midi_event 14899 1 snd_seq_midi snd_rawmidi 30180 1 snd_seq_midi snd_seq 61554 2 snd_seq_midi_event,snd_seq_midi snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi snd_timer 29425 2 snd_pcm,snd_seq snd 68876 16 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_hda_codec_cirrus mei 41158 0 soundcore 12680 1 snd apple_bl 13673 0 mac_hid 13205 0 lp 17759 0 parport 46345 3 lp,ppdev,parport_pc usb_storage 57204 0 hid_apple 13237 0 hid_generic 12540 0 ghash_clmulni_intel 13259 0 aesni_intel 55399 399 aes_x86_64 17255 1 aesni_intel xts 12885 1 aesni_intel lrw 13257 1 aesni_intel gf128mul 14951 2 lrw,xts ablk_helper 13597 1 aesni_intel cryptd 20373 4 ghash_clmulni_intel,aesni_intel,ablk_helper i915 600351 3 ahci 25731 3 libahci 31364 1 ahci video 19390 1 i915 i2c_algo_bit 13413 1 i915 drm_kms_helper 49394 1 i915 usbhid 47074 0 drm 286313 4 i915,drm_kms_helper hid 101002 3 hid_generic,usbhid,hid_apple $ dmesg | egrep 'b43|bcma|brcm|[F]irm' [ 0.055025] [Firmware Bug]: ioapic 2 has no mapping iommu, interrupt remapping will be disabled [ 0.152336] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 2.187681] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-99] only partially covers this bridge [ 12.553600] bcma-pci-bridge 0000:02:00.0: enabling device (0000 -> 0002) [ 12.553657] bcma: bus0: Found chip with id 0xA8D8, rev 0x01 and package 0x08 [ 12.553688] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0) [ 12.553715] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0) [ 12.553764] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0) [ 12.605777] bcma: bus0: Bus registered [ 12.852925] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 17 [ 13.085176] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 13.085186] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement) [ 20.862617] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated [ 20.862622] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement) [ 20.862625] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 20.897957] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) $ iwconfig lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"wlan" Mode:Managed Frequency:5.22 GHz Access Point: E0:46:9A:4E:63:9A Bit Rate=65 Mb/s Tx-Power=17 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=63/70 Signal level=-47 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:13 Invalid misc:56 Missed beacon:0

  Read the article

• Unexpected start of already-primary server processes when heartbeat on secondary is stopped.

  - by vorik

  Hi, I've got an active-passive Heartbeat cluster with Apache, MySQL, ActiveMQ and DRBD. Today, I wanted to perform hardware-maintenance on the secondary node (node04), so I stopped the heartbeat service before shutting it down. Then, the primary node (node03) received a shutdown notice from the secondary node (node04). This logging comes from the primary node: node03 heartbeat[4458]: 2010/03/08_08:52:56 info: Received shutdown notice from 'node04.companydomain.nl'. heartbeat[4458]: 2010/03/08_08:52:56 info: Resources being acquired from node04.companydomain.nl. harc[27522]: 2010/03/08_08:52:56 info: Running /etc/ha.d/rc.d/status status heartbeat[27523]: 2010/03/08_08:52:56 info: Local Resource acquisition completed. mach_down[27567]: 2010/03/08_08:52:56 info: /usr/share/heartbeat/mach_down: nice_failback: foreign resources acquired mach_down[27567]: 2010/03/08_08:52:56 info: mach_down takeover complete for node node04.companydomain.nl. heartbeat[4458]: 2010/03/08_08:52:56 info: mach_down takeover complete. harc[27620]: 2010/03/08_08:52:56 info: Running /etc/ha.d/rc.d/ip-request-resp ip-request-resp ip-request-resp[27620]: 2010/03/08_08:52:56 received ip-request-resp drbddisk OK yes ResourceManager[27645]: 2010/03/08_08:52:56 info: Acquiring resource group: node03.companydomain.nl drbddisk Filesystem::/dev/drbd0::/data::ext3 mysql apache::/etc/httpd/conf/httpd.conf LVSSyncDaemonSwap::master monitor activemq tivoli-cluster MailTo::[email protected]::DRBDFailureDrisAcc MailTo::[email protected]::DRBDFailureDrisAcc 1.2.3.212 ResourceManager[27645]: 2010/03/08_08:52:56 info: Running /etc/ha.d/resource.d/drbddisk start Filesystem[27700]: 2010/03/08_08:52:57 INFO: Running OK ResourceManager[27645]: 2010/03/08_08:52:57 info: Running /etc/ha.d/resource.d/mysql start mysql[27783]: 2010/03/08_08:52:57 Starting MySQL[ OK ] apache[27853]: 2010/03/08_08:52:57 INFO: Running OK ResourceManager[27645]: 2010/03/08_08:52:57 info: Running /etc/ha.d/resource.d/monitor start monitor[28160]: 2010/03/08_08:52:58 ResourceManager[27645]: 2010/03/08_08:52:58 info: Running /etc/ha.d/resource.d/activemq start activemq[28210]: 2010/03/08_08:52:58 Starting ActiveMQ Broker... ActiveMQ Broker is already running. ResourceManager[27645]: 2010/03/08_08:52:58 ERROR: Return code 1 from /etc/ha.d/resource.d/activemq ResourceManager[27645]: 2010/03/08_08:52:58 CRIT: Giving up resources due to failure of activemq ResourceManager[27645]: 2010/03/08_08:52:58 info: Releasing resource group: node03.companydomain.nl drbddisk Filesystem::/dev/drbd0::/data::ext3 mysql apache::/etc/httpd/conf/httpd.conf LVSSyncDaemonSwap::master monitor activemq tivoli-cluster MailTo::[email protected]::DRBDFailureDrisAcc MailTo::[email protected]::DRBDFailureDrisAcc 1.2.3.212 ResourceManager[27645]: 2010/03/08_08:52:58 info: Running /etc/ha.d/resource.d/IPaddr 1.2.3.212 stop IPaddr[28329]: 2010/03/08_08:52:58 INFO: ifconfig eth0:0 down IPaddr[28312]: 2010/03/08_08:52:58 INFO: Success ResourceManager[27645]: 2010/03/08_08:52:58 info: Running /etc/ha.d/resource.d/MailTo [email protected] DRBDFailureDrisAcc stop MailTo[28378]: 2010/03/08_08:52:58 INFO: Success ResourceManager[27645]: 2010/03/08_08:52:58 info: Running /etc/ha.d/resource.d/MailTo [email protected] DRBDFailureDrisAcc stop MailTo[28433]: 2010/03/08_08:52:58 INFO: Success ResourceManager[27645]: 2010/03/08_08:52:58 info: Running /etc/ha.d/resource.d/tivoli-cluster stop ResourceManager[27645]: 2010/03/08_08:52:58 info: Running /etc/ha.d/resource.d/activemq stop activemq[28503]: 2010/03/08_08:53:01 Stopping ActiveMQ Broker... Stopped ActiveMQ Broker. ResourceManager[27645]: 2010/03/08_08:53:01 info: Running /etc/ha.d/resource.d/monitor stop monitor[28681]: 2010/03/08_08:53:01 ResourceManager[27645]: 2010/03/08_08:53:01 info: Running /etc/ha.d/resource.d/LVSSyncDaemonSwap master stop LVSSyncDaemonSwap[28714]: 2010/03/08_08:53:02 info: ipvs_syncmaster down LVSSyncDaemonSwap[28714]: 2010/03/08_08:53:02 info: ipvs_syncbackup up LVSSyncDaemonSwap[28714]: 2010/03/08_08:53:02 info: ipvs_syncmaster released ResourceManager[27645]: 2010/03/08_08:53:02 info: Running /etc/ha.d/resource.d/apache /etc/httpd/conf/httpd.conf stop apache[28782]: 2010/03/08_08:53:03 INFO: Killing apache PID 18390 apache[28782]: 2010/03/08_08:53:03 INFO: apache stopped. apache[28771]: 2010/03/08_08:53:03 INFO: Success ResourceManager[27645]: 2010/03/08_08:53:03 info: Running /etc/ha.d/resource.d/mysql stop mysql[28851]: 2010/03/08_08:53:24 Shutting down MySQL.....................[ OK ] ResourceManager[27645]: 2010/03/08_08:53:24 info: Running /etc/ha.d/resource.d/Filesystem /dev/drbd0 /data ext3 stop Filesystem[29010]: 2010/03/08_08:53:25 INFO: Running stop for /dev/drbd0 on /data Filesystem[29010]: 2010/03/08_08:53:25 INFO: Trying to unmount /data Filesystem[29010]: 2010/03/08_08:53:25 ERROR: Couldn't unmount /data; trying cleanup with SIGTERM Filesystem[29010]: 2010/03/08_08:53:25 INFO: Some processes on /data were signalled Filesystem[29010]: 2010/03/08_08:53:27 INFO: unmounted /data successfully Filesystem[28999]: 2010/03/08_08:53:27 INFO: Success ResourceManager[27645]: 2010/03/08_08:53:27 info: Running /etc/ha.d/resource.d/drbddisk stop heartbeat[4458]: 2010/03/08_08:53:29 WARN: node node04.companydomain.nl: is dead heartbeat[4458]: 2010/03/08_08:53:29 info: Dead node node04.companydomain.nl gave up resources. heartbeat[4458]: 2010/03/08_08:53:29 info: Link node04.companydomain.nl:eth0 dead. heartbeat[4458]: 2010/03/08_08:53:29 info: Link node04.companydomain.nl:eth1 dead. hb_standby[29193]: 2010/03/08_08:53:57 Going standby [foreign]. heartbeat[4458]: 2010/03/08_08:53:57 info: node03.companydomain.nl wants to go standby [foreign] Soo... What just happened here??? Heartbeat on node04 stopped and told node03, which was the active node at the time. Somehow, node03 decided to start the cluster processes that were already running. (For the processes that are not critical, I always return a 0 from the startupscript so it does not stops the entire cluster when a non-essential part fails.) When starting ActiveMQ, it returns status 1 because it is already running. This fails the node and shuts everything down. As heartbeat is not running on the secondary node, it cannot failover to there. When I tried to run ha_takeover to restart the resources, absolutely nothing happened. Only after I restarted heartbeat on the primary node the resources could be started (after a delay of 2 minutes). These are my questions: Why does heartbeat on the primary node try to start the cluster processes again? Why did ha_takeover not work? What can I do to prevent this from happening? Server configuration: DRBD: version: 8.3.7 (api:88/proto:86-91) GIT-hash: ea9e28dbff98e331a62bcbcc63a6135808fe2917 build by [email protected], 2010-01-20 09:14:48 0: cs:Connected ro:Secondary/Primary ds:UpToDate/UpToDate B r---- ns:0 nr:6459432 dw:6459432 dr:0 al:0 bm:301 lo:0 pe:0 ua:0 ap:0 ep:1 wo:d oos:0 uname -a Linux node04 2.6.18-164.11.1.el5 #1 SMP Wed Jan 6 13:26:04 EST 2010 x86_64 x86_64 x86_64 GNU/Linux haresources node03.companydomain.nl \ drbddisk \ Filesystem::/dev/drbd0::/data::ext3 \ mysql \ apache::/etc/httpd/conf/httpd.conf \ LVSSyncDaemonSwap::master \ monitor \ activemq \ tivoli-cluster \ MailTo::[email protected]::DRBDFailureDrisAcc \ MailTo::[email protected]::DRBDFailureDrisAcc \ 1.2.3.212 ha.cf debugfile /var/log/ha-debug logfile /var/log/ha-log keepalive 500ms deadtime 30 warntime 10 initdead 120 udpport 694 mcast eth0 225.0.0.3 694 1 0 mcast eth1 225.0.0.4 694 1 0 auto_failback off node node03.companydomain.nl node node04.companydomain.nl respawn hacluster /usr/lib64/heartbeat/dopd apiauth dopd gid=haclient uid=hacluster Thank you very much in advance, Ger Apeldoorn

  Read the article

• Windows Clients: Windows or Linux Domain Controller?

  - by Ramon Marco Navarro

  I'm planning to set up a domain controller for our small computer laboratory. I'm a little confused as to what operating system to use for our domain controller. What's in the lab: The lab has 25 units running a mix of Windows 7 and Windows XP. The domain controller will only have 2GB of RAM running a C2D E7200. (Is this enough?) What we want: The Domain Controller will also be running a git server. The Domain Controller will also be used as a general development machine (mostly Java, PHP). A way to centralize the updates for the windows clients, so that they won't have to download the same patches from the remote site. The machines would just query them from the local domain controller and get the updates from there. Our head recommended that I virtualize a Windows Server 2008 system under a Linux host and use the former as a domain controller and the latter for development or the other way around. A comparison of the advantages and disadvantages of using a Linux distribution or Windows Server 2008 in this situation would also be appreciated. As you may have noticed by now, I'm kinda new to setting up a domain so I hope you guys will be able to help me. Thank you.

  Read the article

• Windows or Linux for VPN-VPN Bridge

  - by James

  I have the following network layout: Network1 ----VPN1-----Network2----VPN2----Network3 I can administer everything in Network1 only and my goal is to get to a box on Network3. I've been told by the admins of Network2 that it's not possible for them to route traffic from Network1 to Network3. I've finally been authorised to host a box in Network2 and I'm hoping with this I can set something up to resolve the issue. My question is should I set this up as a Windows or a Linux box. My initial thought was to use iptables to reroute requests but with my lack of experience with Windows Server (used for something or other in Network2) I'm not sure if this will work. My head's full of questions like: - can I get an ip without logging in to a windows domain? - if I do get an ip, do Windows Servers manage routing through the VPN? - can I make a linux box authenticate with Windows Server to log on to the domain? - would it just be easier to set up a windows box? - is it possible to configure a windows box to do routing from Network1 to Network3? Has anyone done anything like this before? Had experience managing Windows Server? Authenticated (or not as the case may be) to a Windows domain? I'd really appreciate your advice. It might be worth mentioning that the overall objective is to establish a telnet connection from a box on Network1 to a box on Network3.

  Read the article

• VMWare Converter - Remote Linux Install P2V

  - by Zed Said

  I am trying to get what I thought was an easy process working. Here is my situation. I have a remote linux server (running Debian) that I would like to turn into a VM so that I can do testing on it rather than the production server. I downloaded VMWare Converter. I went to the "convert machine" wizard, chose Powered-on machine, entered my remote machine details. Clicking next shows that it correctly connects to my remote linux box. Now, on the next screen, for Destination type, it enters "WMWare Infrastructure virtual machine", and I can't change this. This is where I am stuck. Why do I need another sever to convert with? Is this where my VM gets sent to? And why can't I just convert the VM and save it on the computer that I am running the converter program on? If I do have to use a vmware infrastructure destination, I am confused at what ESX is, why and how I use it. Any help with this process would be more than appreciated!

  Read the article

• How can a CentOS 6 guest running in VirtualBox be configured as a LAMP server that can be accessed from the Windows host?

  - by jtt89

  I was able to conect Centos6 on Virtual Box to Windows (I can ping in both directions) with Host-only Adapter (for connection between the two) and NAT Adapter (to enable Linux on VB to connect to the Internet). I want to set up httpd, mysql and vsftpd servers and in the end easily connect to httpd from Windows based browser and ftp server with a Windows based client as well. I would also want to have access through SSH. I have a general idea of the steps that are involved, but there is also a configuration that I am not sure about at this point. Lets say I follow these steps: yum install httpd yum install php php-pear php-mysql yum install mysql-server mysql_secure_installation yum install vsftpd yum install mod_ssl Technically I have everything installed, but what would be the next steps that I need to take (from the networking point of view, so to speak) to get it all working)? I know I need to configure, at least Apache, and ftp server, but I am not sure how is it gonna work; like where am I gonna be uloading the sites (I know this can vary), how am I gonna know what address to use in a browser if I wanna go to a website x, y, z on that installation etc. This sounds like I need to do some kind of DNS setup and I am kind of stuck at this point. If somebody could give me a general outline of what are the things that need to be done that would be great (I was looking at a lot of websites and I know about etc/sysconfig/network, httpd.config - not too much about it on Apache's site, hostname, hostname -f etc; but it is kind of hard to piece it all together at this point). I am gonna be looking at the books also, but they not always reflect the setup that I have too (VirtualBox). Thank you.

  Read the article

• Linux error when resume from RAM

  - by TuxPotato

  The last two times that I have resumed my laptop from sleep, it has hung and given me this set of errors: [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 1sec aborting [drm:atom_execute_table_locked] *ERROR* atombios stuck executing E692 (len 460, WS 0, PS 4) @0xE6D3 hda_intel: azx_get_responce timeout, switching to single_cmd mode: last cmd=0x01170700 ata6: softreset failed (device not ready) ata4: softreset failed (device not ready) [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 1sec aborting [drm:atom_execute_table_locked] *ERROR* atombios stuck executing E692 (len 460, WS 0, PS 4) @0xE6D3 The last two messages repeat two more times. The first time this happened, Linux's Magic SysRq worked and did a soft reboot, and after that everything was fine till it went to sleep again. It wakes up and gives me this. Here are the laptop stats: Toshiba Satellite L455D-S5976 AMD Sempron SI-42 Processor 2GB DDR2 RAM HD TruBrite Display ATI Radeon Graphics (integrated) Running Ubuntu 10.10 32 bit I'm not sure about the hard drive, but its a 250GB drive with one NTFS partition, two Hidden NTFS, one Linux Swap, and one Ext4. Can someone tell me whats wrong with my laptop? NOTE: This only happens when I close the screen. My computer doesn't go to sleep with the screen open.

  Read the article

• Linux can't find file that exists

  - by Joe

  I'm trying to get Google's Dart language up and running, but it errors when running dart2js. I'm running Arch linux and I installed dart-sdk from AUR. Some relevant terminal output lies below. % dart2js main.dart /usr/local/bin/dart2js: line 7: /usr/local/bin/dart: No such file or directory % cat /usr/local/bin/dart2js #!/bin/sh # Copyright (c) 2012, the Dart project authors. Please see the AUTHORS file # for details. All rights reserved. Use of this source code is governed by a # BSD-style license that can be found in the LICENSE file. BIN_DIR=`dirname $0` exec $BIN_DIR/dart --allow_string_plus=false $BIN_DIR/../lib/dart2js/lib/compiler/implementation/dart2js.dart "$@" % file /usr/local/bin/dart /usr/local/bin/dart: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.15, BuildID[sha1]=0x27fe166ca015c1adfeaf3a6f9c018e7d7af46d9f, stripped % ls -alh /usr/local/bin total 4.9M drwxr-xr-x 2 root root 4.0K Jun 10 22:51 . drwxr-xr-x 12 root root 4.0K Jun 10 22:51 .. -rwxr-xr-x 1 root root 422K May 10 22:41 cargo -rwxr-xr-x 1 root root 2.7M Jun 10 22:50 dart -rwxr-xr-x 1 root root 360 Jun 6 16:20 dart2js -rwxr-xr-x 1 root root 176 Jun 6 16:20 pub -rwxr-xr-x 1 root root 166K May 10 22:41 rustc -rwxr-xr-x 1 root root 1.6M May 10 22:41 rustdoc % uname -rm 3.3.7-1-ARCH x86_64 Could it be because I'm running a 64bit OS and the dart binary is 32bit?

  Read the article

• Linux machine can't find its tape drive

  - by Kyle Hodgson

  I have an older HP NetServer LPr with what is apparently a Symbios SCSI card connecting to a Quantum SuperLoader 3 that is DLT based. From time to time, we seem to lose the connection to the autoloader. It's usually due to flaky power, but not totally sure why; sometimes when this happens the Autoloader's LED's are orange and it needs to be power cycled. The annoying workaround currently is to reboot the machine. As it is our production VPN and DNS server in addition to being our backup server, this is less than optimal. In Debian (Sarge) is there not some command one can type to get the card to notice that it has the autoloader connected again? dcr1:/proc# grep -i symbios /proc/pci SCSI storage controller: LSI Logic / Symbios Logic 53c895 (rev 1). dcr1:/proc# uname -a Linux dcr1 2.4.27-3-686 #1 Tue Dec 5 21:03:54 UTC 2006 i686 GNU/Linux dcr1:/proc# mt status mt: /dev/tape: No such device dcr1:/proc# ls -l /dev/tape lrwxrwxrwx 1 root root 8 2007-02-07 16:01 /dev/tape -> /dev/st0 dcr1:/proc# That mt status command will show the actual st0 status when things are working correctly. The No such device message is usually the second clue that we need to reboot - the first clue is usually that the backups didn't run.

  Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >