Search Results

Search found 19145 results on 766 pages for 'network bridge'.

Page 36/766 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

• Bridged VM guest does not get IPv6 prefix

  - by Arne

  I have a similar problem and setup as described in IPv6 does not work over bridge. My host get a IPv6 prefix but the guest VM only gets a local fe80-prefix. Using tcpdump I can see that solicit messages are going out from the guest but the host (ubuntu-server) doesn't seem to respond: arne@ubuntu-server:/var/log$ sudo tcpdump -i br0 host fe80::5054:00ff:fe4d:9ae0 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on br0, link-type EN10MB (Ethernet), capture size 65535 bytes 14:31:15.314419 IP6 fe80::5054:ff:fe4d:9ae0 > ff02::16: HBH ICMP6, multicast listener report v2, 4 group record(s), length 88 14:31:15.322337 IP6 fe80::5054:ff:fe4d:9ae0 > ff02::16: HBH ICMP6, multicast listener report v2, 1 group record(s), length 28 14:31:15.502374 IP6 fe80::5054:ff:fe4d:9ae0 > ff02::16: HBH ICMP6, multicast listener report v2, 1 group record(s), length 28 14:31:15.743894 IP6 fe80::5054:ff:fe4d:9ae0.dhcpv6-client > ff02::1:2.dhcpv6-server: dhcp6 solicit 14:31:15.802389 IP6 fe80::5054:ff:fe4d:9ae0 > ff02::16: HBH ICMP6, multicast listener report v2, 4 group record(s), length 88 14:31:17.906580 IP6 fe80::5054:ff:fe4d:9ae0.dhcpv6-client > ff02::1:2.dhcpv6-server: dhcp6 solicit I had a firewall issue which I fixed by adding the following (copied from similar IPv4 before.rules settings) to /etc/ufw/before6.rules at the end before the commit statement: # allow bridging (for KVM) -I FORWARD -m physdev --physdev-is-bridged -j ACCEPT I am running the host on a Ubuntu 14.04 server so I guess I could have used dnsmasq but I didn't find any howto for it so I used radvd (which had to be installed) with the following configuration in /etc/radvd.conf: interface br0 { AdvSendAdvert on; AdvLinkMTU 1480; prefix 2a01:79d:xxx::/64 { AdvOnLink on; AdvAutonomous on; }; }; This didn't help though so I guess I must have configured it wrong? Any help appreciated. Br, Arne PS: I wish the Ubuntu documentation included how to configure virtualization to work with IPv6

  Read the article

• Black login screen Ubuntu 12.04 if WGA cable pluged in on reboot

  - by Sulliwane

  I'm using Ubuntu 12.04.1, 64 bits, installed on a Z77 Pro4 (ASrock motherboard), crucial M4 SSD drive (sata 3), and intel i5 3570k (ivy bridge). I have this annoying problem : When I startup the computer, I get a CLI login prompt : At this moment, if I press enter, i get the usual CLI login prompt. If not, here is what I get : From now, if I login using CLI, i identify the lightdm processus, kill and start it : #ps -A | grep lightdm #sudo kill -9 1273 #sudo lightdm and miracle, these commands bring back the gui login screen. BUT It's very annoying as I have to repeat these steps at every boot, and the people using this desktop are not familiar with linux at all! So I tried to figure out the cause and here is what I found : If, when I shutdown the computer, the WGA cable is not pluged in, then Ubuntu will boot on GUI login screen without a glitch! But If the WGA cable is pluged in when shuting down, I will get CLI login prompt... Note 1: I installed linux kernel 3.4, but it hasn't solve the problem. Note 2: Is it linked to the new HD 4000 integrated graphic processor ? Note 3: If i boot on an USB stick (Ubuntu 12.04), NO problems ! Note 4: If booting on the SSD, when clicking "shutdown" button, the shutdown process never ends up (logout screen keep displaying and fans are still rolling). But if booting on USB stick, the shutdown action runs properly.

  Read the article

• Access Configuration Page of Modem (in bridge mode) through router

  - by Ujjwal Singh

  Given the Network Configuration: Internet (121.243.x.y/27) | (121.243.x.z) Static : Public Global IP Modem Bridge Mode | WiMAX (192.168.1.1/24) +169.254.1.1/24 : Modem Configuration Page | (192.168.1.2) Router DLink DIR 615 | Ethernet + WiFi (192.168.0.1/24) | Local network (192.168.0.2) Workstation Ethernet | no WiFi Is there any way, maybe using Routing Tables, to access the Modem configuration page at 169.254.1.1 from my local network, using a Windows 7 PC? Note that the modem is currently able to display its configuration page at 169.254.1.1, i.e. even while it is in bridge mode.

  Read the article

• Secondary fallback/failover network on Cisco ASA

  - by tyranitar

  In my network there is a Cisco ASA 55x0 with "inside" interface (network 192.168.79.0/24) and "outside" interface (network 89.x.x.48/29) There is this nat rule: object network NAToutside nat (inside,outside) dynamic interface and the static route route outside 0.0.0.0 0.0.0.0 89.x.x.49 1 and all ACL rules. Now I have another new outside network by another ISP called "outside2", this network is already natted and the Cisco ASA in in the network 192.168.70.0/24. I would use this network as a fallback one. So I set the nat rule: object network NAToutside2 nat (inside,outside2) dynamic interface and the static route with a different metric route outside2 0.0.0.0 0.0.0.0 192.168.70.1 2 Clearly it doesn't work: when I disconnect the outside ethernet cable no workstation can connect to the Internet throught the outside2 network... What do I need more?

  Read the article

• XAMPP Redirecting to XAMPP directory on Internal Network

  - by user302252

  I installed XAMPP on my desktop. I set up vhosts for about 5 sites and they are all working properly from the desktop itself. The problem arises whenever I try to access these vhosts from my laptop. I changed the hosts file on the laptop to redirect the laptop dev.domain.com requests to the desktop, however, when I try to access these sites from my laptop on the local network, I only receive the XAMPP welcome screen. It seems like when trying to access the vhosts on the desktop from the laptop the vhosts file is ignored as all requests are redirected to the xampp directory. What might I need to adjust to ensure access to the vhosts on the desktop from the laptop?

  Read the article

• Neural Network Output Grouping 0.5?

  - by Mike

  I tried to write a Neural Network system, but even running through simple AND/OR/NOR type problems, the outputs seem to group around 0.5 (for a bias of -1) and 0.7 (for a bias of 1). It doesn't look exactly "wrong"... The 1,1 in the AND pattern does seem higher than the rest and the 0,0 in the OR looks lower, but they are still all grouped so it's debatable. I was wondering a) if there's some obvious mistake I've made or b) if there's any advice for debugging Neural Nets... seeing as you can't always track back exactly where an answer came from... Thanks! Mike

  Read the article

• PHP: upload files to network shared folder

  - by Xi

  Hi there: I have a problem uploading file to a network shared folder. I can connect to the folder by using windows authentication in IE. The script is as followed: $target_path = '\\\\server\\images\\'; $target_path = $target_path . basename( $_FILES['uploadedfile']['name']); if(move_uploaded_file($_FILES['uploadedfile']['tmp_name'], $target_path)) { echo "The file ". basename( $_FILES['uploadedfile']['name']). " has been uploaded"; } else{ echo "There was an error uploading the file, please try again!"; } when i ran it , I got an error message read: Warning: move_uploaded_file(\server\images\pic_firefox.jpg) [function.move-uploaded-file]: failed to open stream: Permission denied in C:\xxxxxxxxx\uploader.php on line 6 I thought that's because windows authentication doesn't work this way. Is there a way I can upload the file by using username/password? Any thoughts would be appreciated.

  Read the article

• What's the best way to Notify network users of outages or maintenance

  - by Dubs

  There are times when one of our applications is down for maintenance and we'd like to let our users know about it before they start flooding our help desk with calls. What's the best way to notify our users of an event on the network? Some users are on our intranet, while others log in from the Web. Is there an application they can install to which we can send notifications messages? I'm interested to hear what others have come up with to address this requirement. Thanks!

  Read the article

• Programatically check whether a drive letter is a shared/network drive

  - by Philip Daubmeier

  Hi SO community! I searched a while but found nothing that helped me. Is there a way to check whether a drive letter stands for a shared drive/network drive or a local disc in python? I guess there is some windows api function that gives me that info, but I cant find it. Perhaps there is even a method already integrated in python? What I am looking for is something with this or similar behaviour: someMagicMethod("C:\") #outputs True 'is a local drive' someMagicMethod("Z:\") #outputs False 'is a shared drive' That would help me as well: someMagicMethod2() #outputs list of shared drive letters Thanks a lot in advance!

  Read the article

• Error while storing to a shared network drive when running website on IIS

  - by vini

  System.UnauthorizedAccessException: Access to the path '\\192.168.0.99\c$\DTA\DTA564348.64U20121217161754.dta' is denied. When i store the file by running on my local asp.net website it works fine and gets stored on the shared network drive However when i run this through IIS i get the above error C# Code StrPath = FilePhypath.ToString(); Web.Config <location allowOverride="true"> <appSettings> <add key="FilephyPath" value="\\192.168.0.99\c$\DTA\"/> </appSettings> </location>

  Read the article

• Connect 4 with neural network: evaluation of draft + further steps

  - by user89818

  I would like to build a Connect 4 engine which works using an artificial neural network - just because I'm fascinated by ANNs. I'be created the following draft of the ANN structure. Would it work? And are these connections right (even the cross ones)? Could you help me to draft up an UML class diagram for this ANN? I want to give the board representation to the ANN as its input. And the output should be the move to chose. The learning should later be done using backpropagation and the sigmoid function should be applied. The engine will play against human players. And depending on the result of the game, the weights should be adjusted then.

  Read the article

• Question about Convolutional neural network.

  - by Nhu Phuong

  I readed few book and acticles about Convolutional neural network, it seem I understand the concept but I don't know how to put it up like in image below: from 28x28 normalized pixel INPUT we get 4 feature map 24x24. but how to get them ? size the INPUT image ? or perform image transformation? but what kind of transformation? or cut up the input image to 4 piece 24x24 by 4 corner? I don't understand the process to me it seem they cut up or resize the image to more smaller at each step. please help thanks.

  Read the article

• Neural Network Inputs and Outputs to meaningful values

  - by Micheal

  I'm trying to determine how to transform my "meaningful input" into data for an Artificial Neural Network and how to turn the output into "meaningful output". The way I can always see of doing it is by convering everything to categories with binary values. For example, rather than outputting age, having a 0-1 for <10, a 0-1 for 10 - 19, etc. Same with the inputs, where I might be using for example, hair colour. Is the only way to turn this into input to have Blonde 0-1, Brown 0-1, etc? Am I missing some entire topic of ANNs? Most of the books and similar I read use theoretical examples.

  Read the article

• .NET Neural Network or AI for Future Predictions

  - by Ian

  Hi All. I am looking for some kind of intelligent (I was thinking AI or Neural network) library that I can feed a list of historical data and this will predict the next sequence of outputs. As an example I would like to feed the library the following figures 1,2,3,4,5 and based on this, it should predict the next sequence is 6,7,8,9,10 etc. The inputs will be a lot more complex and contain much more information. This will be used in a C# application. If you have any recommendations or warning that will be great. Thanks

  Read the article

• Setting up Ubuntu Server as a Router with DHCPD and 3 Ethernet devices

  - by cengbrecht

  My configuration: Ubuntu 12.04 DHCP3-server eth0, eth1, eth2 Edit: removed br0&br1 eth0 is the external connection eth1 & eth2 are the internal network eth1 and eth2 are supposed to be seperate networks of student/teachers respectivly. What I would like to have is the internet from external device bridged to device 1 and 2, with the DHCP server controlling the two internal devices. Its already working with DHCP, the part I am stuck on is bridging for internet. I have setup a script that I found here: Router With the original script he linked here: Ubuntu Router Guide echo -e "\n\nLoading simple rc.firewall-iptables version $FWVER..\n" IPTABLES=/sbin/iptables #IPTABLES=/usr/local/sbin/iptables DEPMOD=/sbin/depmod MODPROBE=/sbin/modprobe EXTIF="eth0" INTIF="eth1" INTIF2="eth2" echo " External Interface: $EXTIF" echo " Internal Interface: $INTIF" echo " Internal Interface: $INTIF2" EXTIP=`ifconfig $EXTIF | grep 'inet addr:' | sed 's#.*inet addr\:\([0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\).*#\1#g'` echo " External IP: $EXTIP" #====================================================================== #== No editing beyond this line is required for initial MASQ testing == The rest of the script below this is as is. I can get ip from the eth1 & eth2 devices, and my computer can see them, and them it, however, internet is not being passed through. If you need more information please just let me know. EDIT: So I had a 255.255.254.0 network, I believe that was causing the issue. Not sure if it will matter on the second card, I will test later. After changing the subnet to 255.255.255.0 the pings will pass through, however, I cannot get DNS requests to pass? My new Config for Firewall Rules # /etc/iptables.up.rules # Generated by iptables-save v1.4.12 on Wed Nov 28 19:43:28 2012 *mangle :PREROUTING ACCEPT [39:4283] :INPUT ACCEPT [39:4283] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [12:4884] :POSTROUTING ACCEPT [13:5145] COMMIT # Completed on Wed Nov 28 19:43:28 2012 # Generated by iptables-save v1.4.12 on Wed Nov 28 19:43:28 2012 *filter :FORWARD ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A FORWARD -j LOG -A FORWARD -m state -i eth1 -o eth0 --state NEW,ESTABLISHED,RELATED -j ACCEPT -A FORWARD -m state -i eth2 -o eth0 --state NEW,ESTABLISHED,RELATED -j ACCEPT -A FORWARD -m state -i eth0 -o eth1 --state NEW,ESTABLISHED,RELATED -j ACCEPT -A FORWARD -m state -i eth0 -o eth2 --state NEW,ESTABLISHED,RELATED -j ACCEPT COMMIT # Completed on Wed Nov 28 19:43:28 2012 # Generated by iptables-save v1.4.12 on Wed Nov 28 19:43:28 2012 *nat :INPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -o eth0 -j MASQUERADE -A POSTROUTING -o eth0 -j SNAT --to-source 192.168.1.25 COMMIT # Completed on Wed Nov 28 19:43:28 2012 Not sure what else you may need, but I am using Webmin to control the server(Needed for the operators on site to know how to use it.) If you could explain it as standard CLI commands, or edits to this file directly then we should be ok. :) And thanks again Erik, I do believe your edits did help.

  Read the article

• Request time out error

  - by Neo

  Hi Today i came across strange problem whenever i try to pinging to my server works properly but whenever i send http request from browser the request time out happens. can anybody help me to resolve this issue.

  Read the article

• Probability and Neural Networks

  - by Betamoo

  Is it a good practice to use sigmoid or tanh output layers in Neural networks directly to estimate probabilities? i.e the probability of given input is the output of sigmoid function in the NN

  Read the article

• Transfer VLAN tagged packets over WLAN?

  - by stefan.at.wpf

  I have the following composition of devices: [selfmade router] - ethernet - [WLAN router 1] ----- wlan ------ [WLAN router 2] WLAN router 2 has 5 ethernet ports, each as an own VLAN, so 5 VLANs. I want to manage the routing and firewalling between those VLANs at selfmade router. What technique would I use to pass the tagged vlan packets from WLAN router 2 to selfmade router? Could I use a bridge from WLAN router 2 to WLAN router 1 which itself has a bridge from WLAN router 1 to selfmade router or do I have a wrong understanding of a bridge? Thanks for any hint on this :-)

  Read the article

• No HDMI audio in 13.04

  - by King84

  I have just upgraded from 12.10 to 13.04 and now everything works perfectly, except the fact that I have no audio via HDMI. I am using a Samsung tv-monitor connected via HDMI to my video card Asus EAH4670/DI/1GD3 (which has a Radeon HD 4670 gpu on it), installed phisically into my motherboard which is a MSI 770-C45. I am running kernel 3.9, I just have no sound. I tried downloading and installing https://code.launchpad.net/~ubuntu-audio-dev/+archive/alsa-daily/+files/oem-audio-hda-daily-dkms_0.201304261252~raring1_all.deb , but without any good result. Please help, I need my audio back. In the end, this is my lspci command output. ale@beast:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RX780/RX790 Host Bridge 00:02.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (external gfx0 port A) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (PCI express gpp port C) 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3c) 00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge 00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV730 XT [Radeon HD 4670] 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 03) ale@beast:~$

  Read the article

• SNMP Broadcast on Windows

  - by SNMP Dev

  I'm writing an SNMP agent in windows. The agent responds fine simple get and get-next request sent directly to computer's ip address. But when I do a SNMP broadcast, the computer receives the packet but does not anwer that. Why is that? The firewall is off and the antivirus too.

  Read the article

• Apache HttpClient CoreConnectionPNames.CONNECTION_TIMEOUT does nothing ?

  - by Maxim Veksler

  Hi, I'm testing some result from HttpClient that looks irrational. It seems that setting CoreConnectionPNames.CONNECTION_TIMEOUT = 1 has no effect because send request to different host return successfully with connect timeout 1 which IMHO can't be the case (1ms to setup TCP handshake???) Am I misunderstood something or is something very strange going on here? The httpclient version I'm using as can be seen in this pom.xml is <dependency> <groupId>org.apache.httpcomponents</groupId> <artifactId>httpclient</artifactId> <version>4.0.1</version> <type>jar</type> </dependency> Here is the code: import java.io.IOException; import java.util.Random; import org.apache.http.HttpEntity; import org.apache.http.HttpResponse; import org.apache.http.client.ClientProtocolException; import org.apache.http.client.HttpClient; import org.apache.http.client.methods.HttpGet; import org.apache.http.client.methods.HttpUriRequest; import org.apache.http.impl.client.DefaultHttpClient; import org.apache.http.params.CoreConnectionPNames; import org.apache.http.util.EntityUtils; import org.apache.log4j.Logger; public class TestNodeAliveness { private static Logger log = Logger.getLogger(TestNodeAliveness.class); public static boolean nodeBIT(String elasticIP) throws ClientProtocolException, IOException { try { HttpClient client = new DefaultHttpClient(); // The time it takes to open TCP connection. client.getParams().setParameter(CoreConnectionPNames.CONNECTION_TIMEOUT, 1); // Timeout when server does not send data. client.getParams().setParameter(CoreConnectionPNames.SO_TIMEOUT, 5000); // Some tuning that is not required for bit tests. client.getParams().setParameter(CoreConnectionPNames.STALE_CONNECTION_CHECK, false); client.getParams().setParameter(CoreConnectionPNames.TCP_NODELAY, true); HttpUriRequest request = new HttpGet("http://" + elasticIP); HttpResponse response = client.execute(request); HttpEntity entity = response.getEntity(); if(entity == null) { return false; } else { System.out.println(EntityUtils.toString(entity)); } // Close just in case. request.abort(); } catch (Throwable e) { log.warn("BIT Test failed for " + elasticIP); e.printStackTrace(); return false; } return true; } public static void main(String[] args) throws ClientProtocolException, IOException { nodeBIT("google.com?cant_cache_this=" + (new Random()).nextInt()); } } Thank you.

  Read the article

• Plain-English tutorial on artificial neural networks?

  - by Stuart

  I've Googled, StackOverflowed, everything, and I cannot seem to find a tutorial I can understand. I understand the concept of genetic algorithms, and how to implement them, (Though I haven't tried) but I cannot grasp the concept of neural networks. I know vaguely how they work... And that's about it. Could someone direct me to a tutorial that could help someone who has not even graduated middle school yet? Sure, I'm several years ahead of the majority of people my grade, but I don't understand summation, (which I apparently need if I don't want a simple binary output) vectors, and other things that I apparently should know. Is there a simple, bare-bones tutorial for neural networks? After I learn the basics, I'll proceed to more difficult ones. Preferably, they would be in Java. Thanks!

  Read the article

• Inform me when site (server) is online again

  - by dede

  When I ping one site it returns "Request timed out". I want to make little program that will inform me (sound beep or something like that) when this server is online again. No matter in which language. I think it should be very simple script with a several lines of code. So how to write it?

  Read the article

• Monitor network connectivity in WP7 apps

  - by Daniel Moth

  Most interesting Windows Phone apps rely on some network service for their functionality. So at some point in your app you may need to know programmatically if there is network connection available or not. For example, the Translator by Moth app relies on the Bing Translation service for translations. When a request for translation (text or voice) is made, the network call may fail. The failure reason is not evident from any of the return results, so I check the connection to see if it is present. Dependent on that, a different message is shown to the user. Before the translation phase is even reached, at the app start up time the Bing service is queried for its list of  languages; in that case I don't want to show the user a message and instead want to be notified when the network is available in order to send the query out again. So for those two requirements (which I imagine are common in other apps) I wrote a simple wrapper MyNetwork static class to the framework APIs: Call once MyNetwork.MonitorNetworkAvailability() method so it monitors the network change At any time check the MyNetwork.IsConnected property to check for network presence Subscribe to its MyNetwork.ConnectionEstablished event Optionally, during debugging use its MyNetwork.ChangeStatus method to simulate a change in network status As usual, there may be better ways to achieve this, but this class works perfectly for my scenarios. You can download the code here: MyNetworks.cs. Comments about this post welcome at the original blog.

  Read the article

• How to share internet connection on Mac os x to Virtualbox vm’s using Host-only

  - by redben

  In one line : is the following possible : Airport <- "osx bridge" - vbox-Host-only - vm's Virtualbox (3.1.4) setup : Host : Mac OS X 10.5 Guest : Ubuntu Linux adapter1 - Bridged (en1: Airport) : To give the vm access to internet and communicate when Airport is connected adapter2 - Host-Only (vboxnet0) : To enable host/guest communication when Airport is not connected I'd like to make it simpler and only keep adapter 2 (host-only) and relying on os x connection sharing/bridging I thought i could just keep the Host only configuration, and on the host go to internet sharing and select "share from airport" to vboxnet0 . Only to find out that vbox's virtual interface doesn't appear in the interfaces list on os x preferences. I know that on a linux host you could install something called bridge-utils and use that to bridge the two insterfaces. Is there any thing like that for Mac ?

  Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >