Search Results

Search found 1315 results on 53 pages for 'pci e'.

Page 36/53 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

• Xenserver boot error

  - by Adrian

  I'm trying to get Xenserver 5.5 running on a spare computer here, hardware specs: Intel Q6600, 4GB Ram, and Gigabyte GA-P35-DS3R motherboard Xenserver itself installs fine onto a 150GB sata hdd, however it fails to boot whatsoever, giving this garbled mess: http://img697.imageshack.us/img697/9918/biosi.jpg it's not frozen because if I press enter it just prints a different garble and it also says "could not find kernel image". The strangest thing is if I put that hdd in my desktop and assign it to a VMWare desktop vm (under the ESX profile no less) it boots perfectly... leading me to believe there are no problems with the install or the hdd itself. From what I can tell the error seems to be occuring completely seperately to Xenserver, in the bootloader extlinux?. If there was a motherboard compatibility issue I would think it would also have manifested during installation, and the fact the problem seems to be with the booting into Xen makes me doubt this. Any ideas guys? (I'm using Xen because it can do PCI passthrough without VT-d.)

  Read the article

• Computer starts, POSTs normal, no video

  - by Annath

  So, I recently tried to start up an old computer of mine. It would not power on, so I replaced the PSU. When I powered it on, all the fans spun up and the POST beeps indicated a normal startup. The problem was there was no video output. Every couple of minutes, I hear the post code again. I think it is restarting after POST, but without video I have no idea why. Does anyone have an idea as to why this is happening, and how to fix it? EDIT: The video card is a PCI-e card. There is no integrated graphics on the motherboard. If I remove the video card, the POST indicates a missing card. When I put it back, it goes back to normal, so I know that it recognizes that the card exists.

  Read the article

• Windows XP does not list WPA wireless networks

  - by Tomalak

  What can be the reason that Windows XP does not show WPA-encrypted wireless networks? The laptop I have problems with is an older model (Toshiba Satellite Pro 6100) with Windows XP SP3 on it, fresh install. The wireless network card in it is an Agere product that lists as "Toshiba Wireless LAN Mini PCI Card". The networks showed up perfectly before I first tried to connect to one (it was set to WPA2). The connection failed (the card supports WPA only), then something must have happend and Windows hides these networks now. A manually configured WPA setup via Windows' own wizard works, I'm using it right now. The network just won't show up in the list of available network on its own. I suspect that XP incorrectly set a flag somewhere that this network card does not support WPA. Is there such a flag, and if so, how can I change it back?

  Read the article

• Running hardware with only 32bit drivers in 64bit windows

  - by Howard

  Recently we had to upgrade a system to handle added HD IP cameras. This upgrade involved an entirely new computer build with the exception of a rather pricey Geovision DVR (PCI/GV1480 series). Apparently while these cards do support Windows 7, they do not support Windows 7 x64. I'm stuck between a rock and a hard place here trying to figure out how we can remedy this, is there a virtualization solution that will allow devices with driver issues to passthru to the Guest OS? I was thinking XPMode may work for this solution however I am unsure if it runs 32bit or 64bit and if it'll allow driver-issue devices to pass to it. Any help would be greatly appreciated, Best Regards, Howard

  Read the article

• Best Practice: iDRAC & NIC Selection

  - by Josh Brower

  I am setting up a new Dell server with iDRAC 6 Express. My options for the NIC are: 1) Shared 2) Shared with failover to LOM2 3) Shared with failover to all LOMs The server has 2x dual-nic PCI-E cards (total of 4 nics) My questions are thusly: -What is best practice for setting this up? Is there any reason why I would not want option 3? -If the NIC is being used for both iDRAC and the OS, (there is no dedicated iDRAC nic), does this ever cause any kinds of issues for either iDRAC or the OS? Thanks- -Josh

  Read the article

• SSLCipherSuite - disable weak encryption, cbc cipher and md5 based algorithm

  - by John

  A developer recently ran a PCI Scan with TripWire against our LAMP server. They identified several issues and instructed the following to correct the issues: Problem: SSL Server Supports Weak Encryption for SSLv3, TLSv1, Solution: Add the following rule to httpd.conf SSLCipherSuite ALL:!aNULL:!eNULL:!LOW:!EXP:RC4+RSA:+HIGH:+MEDIUM Problem: SSL Server Supports CBC Ciphers for SSLv3, TLSv1 Solution: Disable any cipher suites using CBC ciphers Problem: SSL Server Supports Weak MAC Algorithm for SSLv3, TLSv1 Solution: Disable any cipher suites using MD5 based MAC algorithms I tried searching google for a comprehensive tutorial on how to construct an SSLCipherSuite directive to meet my requirements, but I didn't find anything I could understand. I see examples of SSLCipherSuite directives, but I need an explanation on what each component of the directive does. So even in the directive SSLCipherSuite ALL:!aNULL:!eNULL:!LOW:!EXP:RC4+RSA:+HIGH:+MEDIUM, I dont understand for example what the !LOW means. Can someone either a) tell me the SSLCipherSuite directive that will meet my needs or b) show me a resource that clearly explains each segment of a SSLCipherSuite is and how to construct one?

  Read the article

• cloning mac address of physical server converted into vmware server

  - by user24981

  We've recently converted a physical Windows Server 2003 into vmware using P2V. However, one of the pieces of software on the 2003 machine are still looking for the old server's network MAC address in order to run. I've read several articles where it's discussed that you can modify the last part of the generated address and set it to static, but I need to clone the whole mac address to mimic the one in the old server. We're running CentOS and VMware server 2.0 as the host system. I was told that maybe adding in a second network card in the host and setting the virtual system's nic to that card instead of "bridged" would allow me to edit the vmx file and clone the whole MAC address. I can't use the old network card from the physical server because it's ISA and our new bus is PCI Any ideas? Thanks, Mike

  Read the article

• Laptop wakes from sleep, once, due to audio controller (Windows 7)

  - by stijn

  The laptop is a recent Dell XPS 15z and the problem is as follows (reproducible about 90% of tries): put laptop to sleep using either Start-Sleep or closing the lid laptop goes to sleep after about 5 seconds, but instantly wakes again showing a black screen (touching the keyboard or moving the mouse shows the login screen one normally gets after wake) login again, put laptop to sleep latop stays in sleep mode output of powercfg -lastwake after the first instant wake shows the audio controller is responsible. Why would that be, why only the first try, and how to fix this? Wake History Count - 1 Wake History [0] Wake Source Count - 1 Wake Source [0] Type: Device Instance Path: PCI\VEN_8086&DEV_1C20&SUBSYS_04461028&REV_05\3&11583659&0&D8 Friendly Name: Description: High Definition Audio Controller Manufacturer: Microsoft

  Read the article

• Fried graphics card, how to proceed ?

  - by user19496

  Motherboard: Biostar TPower I45 I fried my graphics card (white smoke), by removing the cable marked PCI-E from the card, and then booting. Removed the graphics card, and now the machine is booting, and I can ping it. However I have no possibility to see what is actually happening, because I can't attach a monitor. Can I workaround the lack of monitor in some way, just to see if the motherboard is fine, attach a cable and telnet in or any other way ? Or, do I have to buy and install a new graphics card to be sure ?

  Read the article

• How to automatically disable secondary monitor in Windows 7

  - by Phenom

  My primary monitor is attached to my onboard video card. My secondary monitor is attached to my PCI-E card. When I first start my computer, only the primary monitor is on, and it is the only monitor that is recognized. While I'm in Windows 7, if I turn on my secondary monitor, Windows 7 automatically detects it, and expands my desktop to stretch across both monitors. But if I turn off the secondary monitor, Windows 7 doesn't automatically disable it. Is there a way I can get it to automatically disable when I turn it off, or is there a utility that makes it easier to disable it instead of having to go to screen resolution?

  Read the article

• Is the Realtek network driver on Windows Update fixed yet?

  - by Ian Boyd

  Months ago i was experiencing problems with my networking, and was hoping the updated Realtek RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.20) driver available from Microsoft on Windows Update would fix the problems. Instead, after the reboot, the network device failed to start, and the driver had to be rolled back. I'm not the only person to get this problem, it even was dealt with by a superuser. A co-worker experienced the exact same problem, and we independently came up with the same solution: hide the updated driver in Windows Update. So I've continued to have my network troubles, and i still need an updated driver. Is the version of the Realtek driver on Windows Update fixed yet? i know Microsoft never pulled it down, but maybe it's been up-updated. i really don't want to find out by downloading it. Can someone else confirm that it's no longer broken - or can someone else be my guinea pig?

  Read the article

• How to install virtio balloon driver in Windows Server 2008 Std x64

  - by javano

  I am trying to run the install command in the INF file that comes on the virtio drivers ISO, after having downloaded devcon.exe from Microsoft's website. I am getting the following error and I don't know how to progress; C:\Users\Administrator\Desktop\ADM64>devcon install BALLOON.inf PCI\VEN_1AF4&DEV_1002&SUBSYS_00051AF4&REV_00 devcon.exe failed. 'DEV_1002' is not recognized as an internal or external command, operable program or batch file. 'SUBSYS_00051AF4' is not recognized as an internal or external command, operable program or batch file. 'REV_00' is not recognized as an internal or external command, operable program or batch file. Thank you.

  Read the article

• ATI radeon hd 5450 Graphics Card Issues

  - by RGM-79FP GM Striker

  I have an Old Dell Optiplex 755 SFF with an Intel Core 2 Processor (windows 7). Now This can hold a PCI-E x16 port. Now I got an ATI Radeon HD 5450 low profile. I plugged and played and it fits without a hitch, the software installed too! , now for the graphics well... It doesn't really work at all as it seems to freeze at the moment that it loads on the windows logo. It loads into safe mode so I'm not really sure what the problem is. Any ideas, I read the dell forums and they should be somewhat compatible... with the specs so I'm at a loss here. and I am a novice here. Ideas? Edit I have tried to reset the cmos,no luck there. I have tried to move the ram as well. nothing big happened.

  Read the article

• Internal USB A Female to motherboard 4-pin that mounts internally

  - by rockinthesixstring

  I'm wondering if anyone knows of a product like this but that is physically mountable internally rather than on a cable? I'm planning on building a super low profile "gateway" pc that is dedicated to handling internet traffic in my home. I have a great 1U rackmountable chassis for an ITX motherboard, but I need the hard drive real estate for the additional NIC required to run a gateway (one onboard and one PCI). So the plan is to use a small 8GB USB Jump Drive for the OS inside the box (as to not have one hanging out the back. And although it's racked, I still don't want the jump drive flopping around internally, so I want it fixed somehow. I have an alternative idea where by I use a flush mount zap strap saddle and a zip tie to hold it in place, but that seems kind of like a hack.

  Read the article

• Dedicated GPU in Dell PowerEdge C1100

  - by Eli Gundry

  We recently purchased a Dell PowerEdge C1100 off lease with the initention of using it for graphics processing. We installed an AMD HD 7000 series GPU in it that runs off of board power and it sends video to the display. That said, the video is very choppy, leading us to belive that the onboard video is doing all the processing and sending it to the card. Is there any way to either disable the VGA on this server or tell the OS to only use the dedicated card. More info: The server is running REHL 6.4 The graphics running the proprietary AMD drivers The video card only works in OS and does not show the BIOS on boot (we know that it's impossible to change this) Any ideas, guys? Update We are now thinking that the GPU is doing the graphics processing, but not working at the full speed of the PCI bus. Which is odd, because it is an x16 slot, but probably optimized to use a RAID card (if that makes any sense). Is there any way to remedy the choppy graphics on this server?

  Read the article

• 3rd monitor with Dell Precision 490

  - by Animesh Kumar

  I am trying to go for a 3 monitor setup on my workstation, but need some information before I can invest in a new graphics card and 2 monitors. Would be glad to get some help here: I have a Dell Precision 490 workstation with Nvidia Quadro FX 4500 graphics card (PCI-E 16) on it. It has 2 DVI-D ports that can support 2 monitors upto 2560x1600 resolution. For the third monitor, I was looking at Nvidia NVS 295 card, however I am not sure if it is physically possible to hook another card to the motherboard. Here is the spec of Precision 490: http://www.dell.com/downloads/global/products/precn/en/spec_precn_490_en.pdf Can I attach NVS 295 to it? If not, what options do I have?

  Read the article

• Are there open source Linux drivers for the Panda Wifi USB adapter?

  - by Zifre

  I'm looking for a wireless adapter for my new PC. My requirements are: it supports 802.11n it is cheap (under 30 USD) it has good, open source Linux drivers (will work "out of the box") preferably USB, but PCI is okay too I found the Panda Wifi (b/g/n) 150Mbps Wireless-N (802.11n) USB Adapter. It says there is Linux support. However, I want to make sure there are open source drivers included with the Linux kernel. Does anyone know what the chipset for this adapter is? What driver it would use?

  Read the article

• Broadcom BCM5716 Hangs on CentOS 6 Boot

  - by someotherguy

  I have a fresh CentOS 6 installation on a Dell R310 server with a Broadcom BCM5716. The onboard NIC is causing the boot to hang for some reason. Welcome to CentOS Linux Starting udev: udev: starting version 147 Boardcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.23b (Feb 01, 2011) bnx2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 That's it... then it just hangs / freezes. If I disable the NIC via the BIOS settings, CentOS boots fine. I've downloaded and installed the latest driver from Broadcom's website. Any ideas?

  Read the article

• Virtual fiber channel HBA in Solaris

  - by Phil

  We are trying to set up some virtual Fibre Channel HBA's in Solaris. This seems to be possible with NPIV. Creating NPIV's in a Solaris global zone works fine, but passing that NPIV to a zone didn't work at all. We tried to pass the NPIV as following: # zonecfg -z zone1 'info' zonename: studentz1 [...] device: match: /devices/pci@0,0/pci8086,25f9@6/pci8086,350c@0,3/pci1077,140@4/fp@1,0:devctl allow-partition not specified allow-raw-io not specified Wat we want to do is, set up an environment for SAN exercises. We don't have a physical host per student, so we try to virtualise that in some way (Solaris zones or VMware). It should be possible to display the WWN of the virtual HBA and mount the storage presented by the disk subsystem. Any ideas to pass the NPIV to a solaris zone or to virtualise this with vmware?

  Read the article

• Mother Board Question

  - by user33931

  1st, I am software guy. I do not do hardware. So I know to you hardware geeks, this is a dumb question. I just inherited a box with a ASUS P5GZ-MX mother board. I have attempted to install two nVidia PCI video cards. I put a 750w power supply in the system to be sure I have enough power. With no extra video cards, the 3.3 v shows normal. When I put one card in, the 3.3 goes to 3.5-3.6 and flashes red (over voltage) about 30% of the time. When I put the 2nd card in, it goes to 3.73 v and stays red all the time. Any Ideas why the voltage goes up when I add cards instead of going down? More Importantly, is this dangerous to the system?

  Read the article

• Computer wont POST after power outage

  - by aaron

  I had just turned my computer on and windows was loading when the power in my neighborhood went out. Normally, when I turn my computer on, the video card fan spins up, then slows down, POST and windows boots. Now, after the blackout, the video card fan spins fast and wont stop. Nothing is displayed on the monitor. The monitor does not detect that the video card is sending it signals, it just stays on standby. No POST or beep codes. This is what I have tried so far: My motherboard has 2 PCI express slots and I tried plugging the video card into both of them but that didn't fix anything. I have replaced the power supply, that didn't fix anything. I cleared the CMOS, that didn't fix anything. Does anyone have any idea of what could be wrong? Thanks!

  Read the article

• Windows 7 Via Hyperion 4-1 drivers

  - by Gratzy

  I have a clean install of Win 7 on some relatively old hardware. Everything works pretty well however my cpu is pegged at 100% most of the time. Task Manager shows srvchost as being a main culprit of course but also system interrupts. I have a Biostar socket 478 MB with Via chipset. I have tried to find Windows 7 drivers for this but when I download and try to install what VIA/BIOSTAR say should be good for all OS's it will not load. I get a message saying can't find components for this OS. Anybody have any idea where I might find suitable drivers for the Chipset? BTW I'm not using the integrated graphics on the board but have a radeon 4500 pci-e card.

  Read the article

• external SCSI tape drive DAT 72 problem Solaris 10

  - by Hassan

  Hi all, I have solaris 10 sparc running and working very well but i have problem with external SCSI tape drive DAT 72 problem it seems to me the tape drive is manufactured by SUN microsystems when i ran mt -f /dev/rmt/0 status it reveals the following output bash-3.00# mt -f /dev/rmt/0 status /dev/rmt/0: No such file or directory when i ran ls -l it reveals the following output ls -l /dev/rmt/0 lrwxrwxrwx 1 root root 43 Sep 20 2006 /dev/rmt/0 -> ../../devices/pci@8,600000/scsi@1,1/st@3,0: it seems to me everything is okay SCSI cable is connected properly to Tape device and to server as well the tape has SCSI termination dongle as well and connected properly to Tape device as well any ideas would be a great assist Thanks in advance

  Read the article

• RTL8168B/8111B Lan card is not detected in RHEL5.1..Not finding Linux software that

  - by Deepak Narwal

  Hello friends... In My computer Lan card model is Realtek RTL8168B/8111B PCI-E GIGABIT ETHERNET NIC (NDIS 6.20) My system is dual boot windows 7 and redhat 5.1 Now windows 7 automatically detected this lan card but in redhat lan card is not detected.I have tried to through evrywhere like network or through neat-tui but it is not showing lan card.. I tried google also but all of them providing windows software for this lan card . So please anyone can tell me the link so that i can download drivers for this and can use internet there.. Thanks a lot in advance Deepak Narwal

  Read the article

• Are mobo raid controllers based on Intel ICH10R southbridge still considered software Raid?

  - by Breadtruck

  So do you still need specific software/drivers (intel matrix?) installed to manage the raid controller, setup the array. If the raid chipset is on-board the motherboard and it uses the CPU, and say I am using a Core 2 Quad Q9550, would a hardware based card still out perform the motherboard chipset? This is for a home workstation and I could spend $300 on a areca ARC-1210 PCI-Express x8 SATA II but I want to be able to justify the money for the raid card. My motherboard is a GIGABYTE GA-EP45-UD3P UPDATE: I was going to RAID5 using 4 500 GB drives, and I was going to buy a controller card but this article got me thinking hmmm....Toms-Southbridge Battle

  Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >