Search Results

Search found 25600 results on 1024 pages for 'table partitioning'.

Page 36/1024 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

  • Linux DD command partition -to- partition

    - by Ben Jackson
    I just used the DD command to copy the contents of one partition over to another partition on another drive, like this: dd if=/dev/sda2 of=/dev/sdb2 bs=4096 conv=noerror sda2 partition was 66GB and sdb2 was 250GB. I read that by doing this the extra space on the drive I am copying to will be wasted, is this true? I wasn't worried about loosing the extra space for the time being however, I just ran: sudo kill -USR1 (PID) to view the current status of DD and it has written over 66GB of data, will it continue to write data until it gets to 250GB? If so, is there a way to stop the process without corrupting it as waiting for it to write blank space seems like a waste of time.

    Read the article

  • Ubuntu 13.10 software raid

    - by Piotr Belniak
    I had already Ubuntu OS installed on my desktop PC, where the software RAID 5 is configured ( 3 partitions /, swap and home ). This system was upgraded from the 11.04 till 13.04, it was quite messy, so I decided to install fresh system on existing partitions. 1st of all i found that there is no alternate version of the installer ( which i used to create previous installation ), so i stared with the regular image. I installed mdadm tools, assemble the partitions - fdisk are showing them properly - so i'm starting the installation - and everything i going fine until the GRUB instalation - this part fails - regardless of which partition i use as a target. From the other hand, neither OpenSUse and Ubuntu 12.04 alternate does not have any problems with installing the GRUB - on this configuration, unfortunatelly Ubuntu 12.04 - 12.10 upgrade is failing bacause of some Xorg issues ;(. Maybe someone has an experience with installation of ubuntu 13.10 GRUB on the RAID 5 partitions - and could give me a hint, how to solve my problem. Thanks in advance, Piotr

    Read the article

  • How can I install Ubuntu Saucy Server with BTRFS?

    - by Walter Souto
    So, a week ago I installed the latest beta version of Ubuntu Saucy Server in a MacMini using BTRFS as only partition to mount "/" on it (I know it's not recommended to do this, but it's not the point here) with no problems et al. Everything went just "naturally"... Now with the released image of 13.10 server, I just can't get any BTRFS partition done from installer. I'm getting a "Can't create filesystem" error whenever I try to create any BTRFS partition, like the 13.10 server final installer can't handle format BTRFS partitions... Am I doing something wrong? Or it's a bug in the installer? Is there anything that I can do to workaround this and get my BTRFS partition set on installation, or I'll need to work this after the installation. I can just leave some space left and create a btrfs partition later on, with Saucy already installed and proceed to use to LXC (which is my solo purpose to have btrfs), but anyway, why installer can't do btrfs anymore?

    Read the article

  • How do I transition from WUBI to a native installation?

    - by Sammy Black
    I have Ubuntu 10.04 Lucid installed through wubi on my laptop (it came with Windows 7 preinstalled). This was my first foray into Linux, and I'm here to stay. I have no use for Windows, and yet I must manually choose not to boot into it! Should I shrink the Windows partition to something negligible and grow the Linux one using something like gparted or fdisk, and just be content that everything runs? In that case, I need to understand the filesystems. Which is which? Here's the output of $ df -h: Filesystem Size Used Avail Use% Mounted on /dev/loop0 17G 11G 4.5G 71% / none 1.8G 300K 1.8G 1% /dev none 1.8G 376K 1.8G 1% /dev/shm none 1.8G 316K 1.8G 1% /var/run none 1.8G 0 1.8G 0% /var/lock none 1.8G 0 1.8G 0% /lib/init/rw /dev/sda3 290G 50G 240G 18% /host I would prefer to start over with a clean install of 10.10 Maverick, but I fear what I may lose. Certainly, I will backup my home directory tree (gzip?), but what about various pieces of software that I've acquired from the repositories? Can I keep a record of them? By the way, I asked a similar question over on Ubuntu forums.

    Read the article

  • Dual Partion windows not working ?

    - by Jason Wagner
    I originally set up Ubuntu "along side" widows(Vista) and realized it was done though wubi after I tried to set up a VB and didn't have enough room. I then repartitioned the HD and did a stand alone Ubuntu install. The problem is when I try to boot windows it starts to load then does a flash and heads back to the start up boot page with ubuntu and windows on the boot screen. Ubuntu loads fine, everytime but windows goes back. Here is the boot script info. http://paste.ubuntu.com/6405545/ Any help would be appreciated. I want to leave windows behind but still need it for some things on this machine.

    Read the article

  • How can I get data off of a (probably) very corrupt drive?

    - by Mercury1964
    So, my younger brother wanted my help today. Apparently, he was helping a friend install Ubuntu to his laptop, and midway through the install (on a filled hard-drive with Windows 8, from the liveusb thing): 1) They realized that they had chosen "Erase and install" accidentally and decided the best course of action was to (in the middle of an install, remember) 2) Force shutdown the computer. After I had replaced my eyeballs back into their sockets, my bro asked if I could do anything about his friend's data, which he wanted back. This, however, drifts out of my normal comfort zone. I know this about the install: 1) It was on a fairly new Windows 8 laptop, so it had whatever filesystem it uses nowadays on the entire drive 2) They didn't choose the "zero out drive data" option 3) They stopped the install at some point (not sure if before or after wipe) I can imagine that it now has two corrupted filesystems on it (whatever Windows 8 was on and ext3) and that some of the data still exists (assuming it wasn't overwritten already). Is there anything that can be done for whatever data is left on the drive?

    Read the article

  • How to make a disk image and restore from it later?

    - by torbengb
    I'm a new Linux user. I've reinstalled my Wubi from scratch at least ten times the last few weeks because while getting the system up and running (drivers, resolution, etc.) I've broken something (X, grub, unknowns) and I can't get it back to work. Especially for a newbie like me, it's easier (and much faster) to just reinstall the whole shebang than try to troubleshoot several layers of failed "fixing" attempts. Coming from Windows, I expect that there is some "disk image" utility that I can run to make a snapshot of my Linux install (and of the boot partition!!) before I meddle with stuff. Then, after I've foobar'ed my machine, I would somehow restore my machine back to that working snapshot. What's the Linux equivalent of Windows disk imagers like Acronis True Image or Norton Ghost?

    Read the article

  • Error in mounting HDD

    - by Vikramjeet
    I am getting the following error whenever I mount my external HDD. It was working before and then I opted for safely removing the drive. Now its giving me following error Error mounting: mount exited with exit code 13: ntfs_mst_post_read_fixup_warn: magic: 0x43425355 size: 4096 usa_ofs: 8850 usa_count: 65535: Invalid argument Actual VCN (0x800006009000000) of index buffer is different from expected VCN (0x0). Failed to mount '/dev/sdb1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details.

    Read the article

  • Is it safe to resize root partition?

    - by binW
    My HDD is partitioned into two equal sized partitions. First is being used for Windows and Second for Ubuntu. Everything is working fine. But now I want to remove Windows and use the disk completely for Ubuntu. I can easily boot from live cd and use GParted to delete Windows partition and then expand Ubuntu partition to use the whole hard disk. But I want to know if its safe i.e Will resizing Ubuntu partition change any thing else like the partition UUID or any thing else? Do I need to reinstall grub after resizing the root partition? It would be great if some one who has already done this can give their advice here.

    Read the article

  • Only recognizes one partition from multi partitions SD card

    - by Jay Ngo
    Hello everybody, I split my sd card into 2 partitions. When i use usb-card-reader to read my sd card, only the one partition shows up on the screen, the other doesn't. I have run the command "sudo fdisk -l" and the result is the same, only one partition is recognized. But i do believe both partitions of my sd card work fine, because i still can boot my single-board computer with that sd card and run some programms, which are inside that unreadable partition. How can i access both partitions of my sd card? Does anyone know how to solve this kind of problem? I really appreciate your help.

    Read the article

  • Can I safely delete the Ubuntu 12.04 partition and use the unallocated space for my Elementary OS?

    - by d4ryl3
    I have this setup: I've decided to switch to Elementary OS Luna (fork of Ubuntu 12.04) as my main Linux distro. Now I need to delete my Ubuntu partition so I could add capacity to my eOS which only has 10Gb. Currently my eOS is in /dev/sda9, and Ubuntu in /dev/sda8/. I forgot where my bootloader is installed, so I ran bootinfoscript, which returned this: `============================= Boot Info Summary: =============================== = Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks in partition 94 for . sda1: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /bootmgr /Boot/BCD sda2: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda3: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /bootmgr /boot/bcd sda4: __________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: According to the info in the boot sector, sda5 starts at sector 2048. Operating System: Boot files: sda6: __________________________________________ File system: swap Boot sector type: - Boot sector info: sda7: __________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda7 and looks at sector 851823520 of the same hard drive for core.img, but core.img can not be found at this location. Operating System: Boot files: /grub/grub.cfg /extlinux/extlinux.conf sda8: __________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda8 and looks at sector 860224256 of the same hard drive for core.img. core.img is at this location and looks for (,msdos9)/boot/grub on this drive. Operating System: Ubuntu 13.04 Boot files: /etc/fstab sda9: __________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: elementary OS Luna Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img` I need advice as to how to proceed. I mean, could I simply delete /dev/sda7/ and /dev/sda8/? Please help, thank you.

    Read the article

  • How to list missing partitions?

    - by celebrimbor
    I have installed Ubuntu on one of my partition and Crunchbang on the other partition. As I wanted to make some continuous space, I moved Crunchbang partition and then checked fdisk output which looks like this Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc7996dfa Device Boot Start End Blocks Id System /dev/sda1 * 63 80324 40131 de Dell Utility /dev/sda4 81918 625139711 312528897 f W95 Ext'd (LBA) /dev/sda5 81920 211816447 105867264 83 Linux /dev/sda6 299100160 341043199 20971520 83 Linux /dev/sda7 341045248 625139711 142047232 7 HPFS/NTFS/exFAT I cannot see sda2 and sda3 partition. How to find them?

    Read the article

  • While installing Ubuntu from Ubuntu Desktop (from USB)

    - by Andres
    I downloaded the Ubuntu Software to create a USB to install Ubuntu. I rebooted my PC (Windows 7), in wich i did a partition (:E) just for Ubuntu. But when i start the installer, it says there's no other OS in my computer, and doesn't give me the option to install it in :E, just the option to format the WHOLE hard drive and install it there. What can i do? Also, i tried Wubi before, but it had an error with "wubildr.mbr"

    Read the article

  • Won't boot after installing Ubuntu 12.04 sucessfully

    - by Matt
    I installed 12.04 successfully and rebooted (I took out my installation CD), and selected the newly installed Linux partition to boot from rEFIt. Then it just comes up with this error message: Error loading operating system which could not be more vague. Take that back. I guess it could say just "error." I don't even get to the boot prompt which limits what I can do. I cannot boot into rescue mode. I tried boot-repair, but it took more than 24 hours to check the system configuration, so I gave up on that. I'm running a Mac Mini with its main OS being Mac OS X 10.5.8. I have an alternate OS Windows XP installed, which was virtually destroyed by this Linux installation. I sacrificed my working, speedy Windows partition for something that won't even boot up. What was I thinking. My Mac partition is slow as crap. I've tried installing 12.04 many times with two different disks. The first time, I had one partition for Linux, then I had 2 (swap+main), then 3 (swap, main and BIOS), then 4 which is what I have now (swap, main, BIOS, and boot/grub). The only way I could get through the install without GRUB giving up was if I created a separate partition for it. Which was pointless, because it did install successfully, but it still doesn't boot up at all. Could rEFIt be booting off of the BIOS or one of the other partitions? Because if that's the case, there is no alternative, because Mac itself without rEFIt refuses to recognize a Linux ext4 (or 2 or 3) format partition. Apple always has to make everything so difficult. If I'm not mistaken, rEFIt is the only application of its kind for Mac. I can boot off of the CD back to the install/try screen. This is extremely upsetting, can you guys help? Please?

    Read the article

  • format/build raid 5 with one 4k drive, three 512b

    - by skidawgz
    I have 4 WD 1TB drives which I want to 4x1TB Raid5. I am not sure what course of action to take next. How do I configure my 4th drive (sde) to align with the rest? Will this affect performance? I rcv this msg (which brings me here to ask these question): The device presents a logical sector size that is smaller than the physical sector size. Aligning to a physical sector (or optimal I/O) size boundary is recommended, or performance may be impacted. fdisk -l shows: Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 81 heads, 63 sectors/track, 382818 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf324ba09 Device Boot Start End Blocks Id System /dev/sdb1 2048 1953525167 976761560 fd Linux raid autodetect Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 81 heads, 63 sectors/track, 382818 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x38bcc1f0 Device Boot Start End Blocks Id System /dev/sdc1 2048 1953525167 976761560 fd Linux raid autodetect Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes 81 heads, 63 sectors/track, 382818 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x570f77e7 Device Boot Start End Blocks Id System /dev/sdd1 2048 1953525167 976761560 fd Linux raid autodetect Disk /dev/sde: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xeb665e7b Device Boot Start End Blocks Id System

    Read the article

  • "Serious errors found HF checking the drive for /home" After Moving /home to external HFSplus partition

    - by Arctic Shadow
    I just installed Mac OS X 10.7 "Lion" and Ubuntu 11.10 on my MacBook Pro. Using these instructions: tuxation.com/creating-home-partition-mac-linux.html . After changing the location of my home folder to the new location, it gives me the error in the title, and my username no longer appears in the login screen. Using the "Other" option with my username seems to make it try to log in, but the screen quickly flashes between blank and a shell before kicking me back to the login screen without notice. I'm trying to share my home folder between Mac OS X and Ubuntu, using an hfsplus partition (unjournaled) between the two. The home partition seems to mount fine as /home, and I am able to modify it under Ubuntu. Below is the line I've added to fstab: /dev/sda3 /home hfsplus defaults 0 1 I should also note that I changed my account's username and home directory location to match this, though I've double checked that and everything seems in order there... Thank you in advance for any assistance. Edit: It seems that the /etc/passwd file didn't have my new home directory's location in it, so I changed that, and I am now able to log into my account, although I am still not listed in the login screen, and my username in the menu on the top right shows up as "[Invalid UTF-8]"...

    Read the article

  • GParted detects entire disk as UNALLOCATED SPACE + hd0 out of disk

    - by msPeachy
    Good day to everyone. I hope someone can help me with my problem. I have a dual boot Windows and Ubuntu system. I recently encountered an hd0 out of disk error and wasn't able to boot Ubuntu. So I booted into Windows. After 2 to 3 times of booting and rebooting Windows, I tried booting Ubuntu again but still I get the same hd0 out of disk error. I decided to run Ubuntu from LIVEUSB to try to fix my Ubuntu partition using GParted, but when I run GParted, it shows my entire disk as UNALLOCATED SPACE! The strange thing is that Nautilus still shows and mounts my partitions. Also every time I boot into Windows , my partitions exists and I am able to read and write to them. I have no idea what is wrong. Please help! I can't stand using Windows since most of the tools I use are in Ubuntu. I don't mind reinstalling Ubuntu. In fact I already tried reinstalling using the LIVEUSB but since GParted or the Ubuntu installer itself does not recognize my partitions and shows the entire disk as unallocated space, I decided not to continue. I am currently running Ubuntu from LIVEUSB. Here's the outpuf of sudo fdisk -l Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb30ab30a Device Boot Start End Blocks Id System /dev/sda1 * 2048 104869887 52433920 83 Linux /dev/sda2 104869888 105074687 102400 7 HPFS/NTFS/exFAT /dev/sda3 105074688 156149759 25537536 7 HPFS/NTFS/exFAT /dev/sda4 156151800 625153409 234500805 f W95 Ext'd (LBA) /dev/sda5 156151808 169156591 6502392 82 Linux swap / Solaris /dev/sda6 169158656 294991871 62916608 7 HPFS/NTFS/exFAT /dev/sda7 294993920 471037944 88022012+ 7 HPFS/NTFS/exFAT /dev/sda8 471041928 625121152 77039612+ 7 HPFS/NTFS/exFAT When I run, sudo parted -l, I got this error message: ubuntu@ubuntu:~$ sudo parted -l Error: Can't have a partition outside the disk! UPDATE I think I might know the problem. The total sectors of sda is 625142448 but the extended partition (sda4) ends at 625153409. Now, my question is, how do I fix this or modify the extended partition (sda4) to matched the total number of sectors? Anyone, please??? UPDATE I was able to fix the unallocated space issue with the help of Rod Smith's tool called fixparts I am now able to view my partitions via GParted in LiveUSB. But the error: hd0 out of disk. Press any key to continue... still persists on reboot. I still can't boot into Ubuntu. Can someone help me please???

    Read the article

  • Can I change a linux swap partition to a file system without losing data?

    - by Diogo
    so I am using ubuntu 11.10, just changed from windows to ubuntu, and one of my file systems, I accidentally set it up as a linux swap partition and now I want to acces my files, as I did in windows, but I do not know any secure way to change that partition to a file system without formating it and loosing the data. Because I do not want to loose the data I have there. Does deleting the partition and mounting it again solve the problem?

    Read the article

  • How to allocate unallocated space of hard disk in Ubuntu 12.4 after installation

    - by user171351
    How to allocate unallocated space of hard disk in Ubuntu 12.04 after installation. My system is running fine with Windows and Linux. I am using Windows rarely and for my official purpose I am using Ubuntu 12.04. I forgot to allocate around 100 GB of space while installing. Now 100 GB is free in HDD and its not usable. How can I allocate that free space as another volume without formatting the current OS?

    Read the article

  • Only recognizes one of multiple partitions on SD card

    - by Jay Ngo
    Hello everybody, I split my sd card into 2 partitions. When i use usb-card-reader to read my sd card, only the one partition shows up on the screen, the other doesn't. I have run the command "sudo fdisk -l" and the result is the same, only one partition is recognized. But i do believe both partitions of my sd card work fine, because i still can boot my single-board computer with that sd card and run some programms, which are inside that unreadable partition. How can i access both partitions of my sd card? Does anyone know how to solve this kind of problem? I really appreciate your help.

    Read the article

  • Please help ubuntu or any other linux os is not booting from cd or usb

    - by Amith
    I will tell you the whole story,one night when i was using KDE on Ubuntu 10.10 Kwin crashed then i shut down the os next day when i booted it the display came completely garbled and i went to safe graphics mode ,it worked and in reinstalled the Nvidia drivers and then restarted .Then immediatly, It said No init found Busybox XX.XX then I thought ill do a fresh install I inserted the ubuntu cd provided to me by Canonical.When i pressed 'try ubuntu without installing' instead of the graphic boot screen i saw.Ubuntu 10.10 in regular text and a progress bar few seconds after that the screen was flooded with error messages first alot of white then red.I then went to my win7 installation and saw a website which told me to find a Ext3 reader and format the ubuntu partition and the swap.I did that and when i restarted. GRUB configuration not found grub> Then it took my win 7 ERD and restored 7's bootloder Xp and 7 were working i put in the livecd again,Same error,Now usin my seven,Please help geeks,Ive even tried Knoppix,Fedora,Debiane.t.c they wont boot and i want to retain my win 7 and winxp partitions,I really miss linux.

    Read the article

  • Ubuntu installer doesn't see internal hard drive on DELL Vostro 3360

    - by valk
    I just received a new DELL Vostro 3360, it has Windows 7 preinstalled. When it comes to the partition window I can't see the hard drive there. I see only /dev/sda or /dev/sdb (either one and in both cases it's a usb drive from which I'm installing). I tried every imaginable BIOS configuration. Tried to change the SATA mode to ATA, DHCI and more. EDIT: I tried to install with standard Ubuntu 12.04 32 bit, and 11.10 64 bit official versions. No luck. I'll appreciate any suggestion.

    Read the article

  • Software installed on root partition or on home partition

    - by Tim
    I am planning to install some big softwares such as Matlab (4GB), Mathematica (4GB) on my Ubuntu partitions. I was wondering if I installed them on my home partition, when I reinstall Ubuntu without touching the home partition, will the softwares still be runnable after reinstallation? what are the advantage and disadvantages of installing softwares on root partition and of on home partition? with your answer to the previous questions, what are some reasonable plans for the sizes of root partition and of home partition? Note that I would like to learn programming in C, C++, Java, Python, Lisp, databases under both Ubuntu and Windows, and no games. My laptop has around 230 GB, where I plan to install both Windows and Ubuntu, and reserve 40 GB for Ubuntu (three partitions: swap, root and home), 110 GB for NTFS partition shared between the two OSes, 70 GB for Windows OS partition, and 10 GB that can be added to any of the above partitions. I will change my plan according to your suggestions. Thanks and regards!

    Read the article

  • Cannot boot into system after deleting partition

    - by Clayton
    Okay...so this was kind of a stupid thing for me to do now that I think back on it. I was experiencing a ton of lag and not as much memory that I could use after installing Ubuntu 12.04. So after remembering I had installed multiple server versions of Ubuntu 12.04 by mistake, I went into Disk Management and proceeded to delete each and every one. Everything went fine. Up until this week, I have not experienced any problems. But starting yesterday I began to get lag just as I had before, and nothing fixed the problem. I decided to remove the Ubuntu partition, since I was also experiencing a visual error when given the option to select one to boot(the screen doesn't come up at all, and I recieved a monitor resolution error instead, but could still access both Windows and Ubuntu via arrow keys). After deleting the Ubuntu partition, so that I could see if running just Windows would fix the problem, I proceeded with what I was doing, installing a few programs that were not tied to my prediciment in any way. Upon rebooting my desktop, however, I recieved the following error: error: unknown filesystem. grub rescue> Hoping I could boot into Ubuntu via a pendrive and possibly backup my important files and wipe the hard drive to start fresh, I installed Ubuntu 13.04, but even that does not boot. Instead, I get this message on a terminal screen: SYSLINUX 4.06. EDD 4.06-pre1 Copyright (C) 1994-2011 H. Peter Anvin et al ERROR: No configuration file found No DEFAULT or UI configuration directive found! boot: So more or less, my desktop is screwed. I need to be able to get to the files inside because of my job as an artist, as well as retrieve my documents for my stories stored on Windows. Once I can succeed in solving this once and for all, I know for a fact I will stick to Ubuntu only, and install what is required to be able to run any Windows applications I used to use or need to use. I would rather not reformat the hard drive, and if I need to, it is a last resort. And I doubt I can use a Windows Recovery Disk to get my files back, as my mom has thrown out a lot of the installation disks and paperwork I would need to even follow through with that. :\ Keep in mind that I am a novice/newbie when it comes to Linux, but am hoping ot become better at it as time goes by. I appreciate any help you guys can give me. This will probably be the last time I attempt to do anything that could risk the well-being of my PC. (I've also looked through various questions on the site and tested a lot of the solutions. None seem to have worked.)

    Read the article

  • Lock a partition to a few folders

    - by Oxwivi
    I want to have a few folders on a partition whose contents I can freely edit, but outside nothing should be saved. Specifically, I want the folders in my Home (Documents, Music, etc) on a different partition, but rest of the normally hidden folders remain in the main partition with Ubuntu. I can make the files within the Home folders save in another partition using fstab binding, but I still can't think of how to lock the partition from edits outside those folders. I'm open to suggestions of alternatives to binding - but please, no symbolic links.

    Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >