Search Results

Search found 13437 results on 538 pages for 'trusted root certificates'.

Page 36/538 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

• zfs rename/move root filesystem into child

  - by Anton

  Similar question exists but the solution (using mv) is awful because in this case it works as "copy, then remove" rather than pure "move". So, I created a pool: zpool create tank /dev/loop0 and rsynced my data from another storage in there directly so that my data is now in /tank. zfs list NAME USED AVAIL REFER MOUNTPOINT tank 591G 2.10T 591G /tank Now I've realized that I need my data to be in a child filesystem, not in /tank filesystem directly. So how do I move or rename the existing root filesystem so that it becomes a child within the pool? Simple rename won't work: zfs rename tank tank/mydata cannot rename to 'tank/mydata': datasets must be within same pool (Btw, why does it complain the datasets are not within same pool when if fact I only have one pool?) I know there are solutions that involve copying all the data (mv, or sending the whole dataset to another device and back), but shouldn't there be a simple elegant way? Just noting that I do not care of snapshots at this stage (there are none yet to care of).

  Read the article

• Cannot find my hard disk while installing linux-“No root file system defined” error

  - by Syam Kumar S

  I am trying install Linux on my computer (tried Ubuntu 10.4 and Linux Mint 9). I started the installation wizard and on the hard disk selection page the hard disk is not displayed. I have a 500GB disk with 5 partitions and windows 7 ultimate in one partition. If I click the forward button, it shows an error- "No root file system defined". I have tried to install by booting from CD and pendrive but both shows the same error. When I load Linux as live CD it doesn't show the hard disk. My hard disk works fine in windows 7. System config: intel i3 2100, 500GB hdd, 2GB ram

  Read the article

• Reinstall after a Root Compromise?

  - by Zoredache

  After reading this question on a server compromise, I started to wonder why people continue to seem to believe that they can recover a compromised system using detection/cleanup tools, or by just fixing the hole that was used to compromise the system. Given all the various root kit technologies and other things a hacker can do most experts suggest you should reinstall the operating system. I am hoping to get a better idea why more people don't just take off and nuke the system from orbit. Here are a couple points, that I would like to see addressed. Are there conditions where a format/reinstall would not clean the system? Under what types conditions do you think a system can be cleaned, and when must you do a full reinstall? What reasoning do you have against doing a full reinstall? If you choose not to reinstall, then what method do you use to be reasonably confident you have cleaned and prevented any further damage from happening again.

  Read the article

• EC2 out of space on root disk, moving it to ephemeral

  - by Joseph Misiti

  I am spawning a few test servers on ec2 that happen to be m1.larges. I am using these test servers for load balancin testing. Anyways, most of the servers I have used before have been backed by EBS, but these instances (ubuntu 11.04) obviously come with a lot of ephemeral space located @ /mnt. What I noticed that is happening is I am running on space on the root disk. I am trying out this tutorial http://www.turnkeylinux.org/docs/using-instance-storage moving my /home + /usr directories to /mnt and then remounting them. This works except it does not survive a reboot. Am I missing something here or is this tutorial not completely correct. How do I make space on my / drive so I can do stuff and survive re-boots.

  Read the article

• Unusually high memory usage on a CentOS VPS with 512 guaranteed RAM

  - by Andrei Bârsan

  I'm working on a medium-sized web application written in PHP that's running on a VPS with 512mb ram. The webapp hasn't been officially launched yet, so there isn't too much traffic going on, just me and a few other people working on it. There is another slightly smaller webapp also hosted on this machine, among 4-5 other small static sites. We are running Centos 5 32-bit & cPanel/WHM. This is the result of running ps aux and, as you can see, it's not using 100% of the RAM. However, on the hypanel overview, it's always shown as using aroun 500MB ram, just for running apache, mysql, and the lowest-memory-footprint versions of the mail server, ftp server etc. -bash-3.2# ps aux USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.0 2156 664 ? Ss 12:08 0:00 init [3] root 1123 0.0 0.0 2260 548 ? S<s 12:08 0:00 /sbin/udevd -d root 1462 0.0 0.0 1812 568 ? Ss 12:08 0:00 syslogd -m 0 named 1496 0.0 0.0 3808 820 ? Ss 12:08 0:00 nsd named 1497 0.0 0.0 10672 756 ? S 12:08 0:00 nsd named 1499 0.0 0.0 3880 584 ? S 12:08 0:00 nsd root 1514 0.0 0.1 7240 1064 ? Ss 12:08 0:00 /usr/sbin/sshd root 1522 0.0 0.0 2832 832 ? Ss 12:08 0:00 xinetd -stayalive -pidfile /var/run/xinetd.pid root 1534 0.0 0.1 3712 1328 ? S 12:08 0:00 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql - mysql 1667 0.0 2.9 225680 30884 ? Sl 12:08 0:00 /usr/sbin/mysqld --basedir=/ --datadir=/var/lib/mysql - mailnull 1766 0.0 0.1 9352 1100 ? Ss 12:08 0:00 /usr/sbin/exim -bd -q60m root 1797 0.0 0.0 2156 708 ? Ss 12:08 0:00 /usr/sbin/dovecot root 1798 0.0 0.0 2632 1012 ? S 12:08 0:00 dovecot-auth root 1816 0.0 3.0 38580 32456 ? Ss 12:08 0:01 /usr/local/bin/spamd -d --allowed-ips=127.0.0.1 --pidfi root 1839 0.0 1.6 63200 17496 ? Ss 12:08 0:00 /usr/local/apache/bin/httpd -k start -DSSL root 1846 0.0 0.1 5416 1468 ? Ss 12:08 0:00 pure-ftpd (SERVER) root 1848 0.0 0.1 6212 1244 ? S 12:08 0:00 /usr/sbin/pure-authd -s /var/run/ftpd.sock -r /usr/sbin root 1856 0.0 0.1 4492 1112 ? Ss 12:08 0:00 crond root 1864 0.0 0.0 2356 428 ? Ss 12:08 0:00 /usr/sbin/atd dovecot 1927 0.0 0.1 5196 1952 ? S 12:08 0:00 pop3-login dovecot 1928 0.0 0.1 5196 1948 ? S 12:08 0:00 pop3-login dovecot 1929 0.0 0.1 5316 2012 ? S 12:08 0:00 imap-login dovecot 1930 0.0 0.2 5416 2228 ? S 12:08 0:00 imap-login root 1939 0.0 0.1 3936 1964 ? S 12:08 0:00 cPhulkd - processor root 1963 0.0 0.8 15876 8564 ? S 12:08 0:00 cpsrvd (SSL) - waiting for connections root 1966 0.0 0.7 15172 7748 ? S 12:08 0:00 cpdavd - accepting connections on 2077 and 2078 root 1990 0.0 0.2 5008 3136 ? S 12:08 0:00 queueprocd - wait to process a task root 2017 0.0 2.9 38580 31020 ? S 12:08 0:00 spamd child root 2018 0.0 0.5 8904 5636 ? S 12:08 0:00 /usr/bin/perl /usr/local/cpanel/bin/leechprotect nobody 2021 0.0 3.2 66512 33724 ? S 12:08 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 2022 0.0 3.1 67812 33024 ? S 12:08 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 2024 0.0 1.9 64364 20680 ? S 12:08 0:00 /usr/local/apache/bin/httpd -k start -DSSL root 2027 0.0 0.4 9000 4540 ? S 12:08 0:00 tailwatchd root 2032 0.0 0.1 4176 1836 ? SN 12:08 0:00 cpanellogd - sleeping for logs nobody 3096 0.0 1.9 64572 20264 ? S 12:09 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 3097 0.0 2.8 66008 30136 ? S 12:09 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 3098 0.0 2.8 65704 29752 ? S 12:09 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 3099 0.0 3.1 67260 32816 ? S 12:09 0:00 /usr/local/apache/bin/httpd -k start -DSSL andrei 3448 0.0 0.1 3204 1632 ? S 12:50 0:00 imap nobody 3537 0.0 1.9 64308 20108 ? S 13:01 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 3614 0.0 1.9 64576 20628 ? S 13:10 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 3615 0.0 1.3 63200 14672 ? S 13:10 0:00 /usr/local/apache/bin/httpd -k start -DSSL root 3626 0.0 0.2 10232 2964 ? Rs 13:14 0:00 sshd: root@pts/0 root 3648 0.0 0.1 3844 1600 pts/0 Ss 13:14 0:00 -bash root 3826 0.0 0.0 2532 908 pts/0 R+ 13:21 0:00 ps aux Lately, without any significant changes to the configuration, the memory usage started peaking and going over 512, causing the virtual server to kill apache, basically murdering our site in the process. Do you have any idea if this is normal and more resources should be acquired? I don't think... since there isn't too much data or traffic online yet.

  Read the article

• Problems with vim/locale as non-root user on Solaris

  - by Lyle

  I do some work on a Solaris 10 machine, and my .vimrc is set up to show unicode characters for tabs and line endings: set listchars=tab:?\ ,eol:¬ This works out of the box on my OS X machine. On Linux as well as Solaris I get the following error when I start vim: Error detected while processing /home/lhanson/.vimrc: line 17: E474: Invalid argument: listchars=tab:?~V?\ ,eol:¬ I solved this on my Linux box by setting LANG=en_US.utf8 ('locale -a' shows this as being an option). On Solaris, however, 'locale -a' shows the following: C POSIX iso_8859_1 Setting LANG to C or POSIX yields the same error, and even though iso_8859_1 probably wouldn't work it doesn't successfully change the locale anyway. As a non-root user, is there any way I can have my unicode characters show up?

  Read the article

• Backup Linux Root Partition (Fedora 12)

  - by SomeNewbie

  I setup my partition scheme to have an extra partition the size of my / partion. I have a separate home directory partition. Essentially, I will be doing things that might make my OS unstable so I'd like to backup the OS state but without bothering my home directory. Can I just backup (maybe with dd?) my root partition to another partition on the HDD? I know to restore it I would have to boot up with a livecd or something and do the reverse procedure. I want this to be as simple and require the least amount of external hardware as possible.

  Read the article

• icacls in windows 7 does not give full permission to write files in root drive

  - by Menuta

  icacls in windows 7 does not give full permission to write files in root drive. We have a very old application based on Omnis7 that needs to create and read/write files on drive C: when running as a restricted user. In Windows XP to give this permission is quite trivial using cacls. cacls C:\ /G Everyone:(C) The equivalent icacls in Windows 7 will not work. icacls C:\ /Grant Everyone:(M) I have also tried the following. icacls C:\ /Grant Everyone:(F) icacls C:\ /Grant Domain\user:(F) trying to create file with a restricted user gives this C:\>copy nul text.txt Access is denied. 0 file(s) copied. After applying the icacls permissions above the result changes to this. C:\>copy nul text.txt A required privilege is not held by the client. 0 file(s) copied. Is this an issue with the way I am applying the permissions? Or is Window 7 being extremely strict?

  Read the article

• Give root password for maintenance

  - by Jevgeni Smirnov

  After entering shutdown now in terminal I get everything running normally and then: All processes ended withing 2 seconds...done INIT: Going single user INIT: Sending processes the TERM signal INIT: Sending processes the KILL signal Give root password for maintenance(or.... I press Ctrl+D, and it shows me login screen Debian. Shutdown through GUI works properly. UPDATE 1 It seems some process hangs. Moreover I'v managed to poweroff server through several retries. Recently i'v installed only ntp and ntpdate. Nothing more. I suppose it might be it conflicting with iptables.

  Read the article

• Can I create an SSH user which can access only certain directory?

  - by RiMMER

  I have a Virtual Private Server which I can connect to using SSH with my root account, being able to execute any linux command and access all the disk area, obviously. I would like to create another user account, which would be able to access this server using SSH too, but only to a certain directory, for example /var/www/example.com/ For example, imagine this user has a HUGE error.log file (500 MB) located in /var/www/example.com/logs/error.log When accessing this file using FTP, this user needs to download 500 MB to view the last lines of the log, but I'd like him to be able to execute something like this: tail error.log Therefore I need him to be able to access the server using SSH, but I don't want to grant him access to all server areas. How can I do this?

  Read the article

• Executed PHP files are stale unitl "touched" (Symlinked NFS mount as web root)

  - by mmattax

  We have a PHP application that has 3 web servers (running Nginx and Apache). The web server's directory root are symlinked directories that point to an NFS mount. For example: web01 has an NFS mount at /data/webapp, which is symlinked to /home/webapp. Apache serves content from /home/webapp/www. We also use ACP for our PHP opcode cache. When we deploy code, we SCP an archive file to the NFS server and extract it. Since upgrading RedHat 6, when we deploy our code the webserver execute "stale" PHP files until touch is run on the PHP files. We thought that APC might be causing a problem, but the issue exists, even after clearing the opcode cache. Any ideas on how to diagnose why the stale PHP code is being executed?

  Read the article

• Migrate an intermediate CA to a new root

  - by Tim Brigham

  Using the Microsoft CA is there any way to cut over to a new certificate authority from an intermediate authority? Both my systems are Microsoft CAs - I have a 2008 R2 Enterprise CA (intermediate) and an old 2003 CA (root). The 2003 box bit the dust and I don't have good backups. I still have a few months before the CRL expires; instead of having to cut over to a new intermediate authority is there a ready way to simply point this intermediate authority to a new offline CA?

  Read the article

• vsftpd: refusing to run with writable root inside chroot

  - by MrROY

  I want to setup a anonymous only ftp server (able to upload files). Here is my config file: listen=YES anonymous_enable=YES anon_root=/var/www/ftp local_enable=YES write_enable=YESr. anon_upload_enable=YES anon_mkdir_write_enable=YES xferlog_enable=YES connect_from_port_20=YES chroot_local_user=YES dirmessage_enable=YES use_localtime=YES secure_chroot_dir=/var/run/vsftpd/empty rsa_cert_file=/etc/ssl/private/vsftpd.pem pam_service_name=vsftpd But when i try to connect it: kan@kan:~$ ftp yxxxng.bej Connected to yxxx. 220 (vsFTPd 2.3.5) Name (yxxxg.bej:kan): anonymous 331 Please specify the password. Password: 500 OOPS: vsftpd: refusing to run with writable root inside chroot() Login failed Can anyone help ?

  Read the article

• What's the best way to mitigate NFS and sudo?

  - by user225874

  Quick background: We have 40 workstations running Linux. NFS is used extensively for bulk data storage and home directories. This allows users to roam freely will relatively transparent file systems. This is an educational environment where postdocs and students have successfully pulled off a coup of sorts. All have gained root on their individual workstations by grooming a technophobic PI who thinks IT people are evil. If I so much as suggest chroot or sudo restrictions, I'll find myself working out of a broom closet. With that in mind, what's the best way to mitigate something like this below? $ hostname workstation1 $ whoami john $ sudo su jane $ whoami jane $ cp -R /home/nfs/jane /mnt/thumbdrive/

  Read the article

• Mounting root failed. Dropping into basic maintenance shell

  - by vmsystem

  Hi, I have purchased AMD Phenom X4 955 3.2GHZ processor with supporting gigabyte GA-MA785GM-US2H mother board / 6GB DDR2 RAM / 500GB SATA drive for learning Vmware ESX 3.5 product. In the above configuration, I have installed windows xp 64 bit operating systems and continue to installed vmware workstation 6.5. From the VM workstation, I can able to install ESX3.5 update2, but I unable to start properly, please refer the below mention error. “Mounting root failed. Dropping into basic maintenance shell. To collect logs for VMware, connect a USB storage device and run 'bin/vm-support '. Machine will be rebooted when you exit from this shell.” The same was tested in the windows 2003 Enterprise Edition server / windows 7 32bit / windows 7 64bit also, Please help me to resolve the issue.

  Read the article

• How to make subdirectory the document root of a web domain or localhost

  - by Ben Huh

  I have a subdirectory abc in the document root /var/www/html I want to be able to run any file any_file.html within the subdirectory by typing in the browser: localhost/any_file instead of localhost/abc/any_file.html or my_domain.com/any_file instead of my_domain.com/abc/any_file.html I tried writing in httpd.conf: <Directory "/var/www/html/abc"> RewriteEngine On RewriteBase / RewriteRule %{REQUEST_FILENAME} %{REQUEST_FILENAME}\.html </Directory> But it doesn't work. Options FollowSymLinks is activated in <Directory> so I believe I would not need to write this again. Does anyone knows why and how to solve it? Thanks. Update: I have another subdirectory efg which I need to be able to access through localhost.

  Read the article

• Checkinstall failed with /root/rpmbuild has no source directory

  - by leo

  I am trying to use checkinstall to build a package from source code. However, when i run checkinstall , it ask : /root/rpmbuild has no source directory, please write the path to the rpm source directory tree. i am running on fedora 12 and system was installed through kickstart via repository of dvd of fc12. I was not aware of the rpm source directory during the installation. so how can i check whether rpm source has been installed or not. if not, how to make the rpm source directory so that i can please the checkinstall and build the package successfully. or can i bypass it? thanks a lot

  Read the article

• Alias a Virtual Directory or Application as Root on IIS 7

  - by manyxcxi

  Our current IIS setup as two applications running on different paths at (for example) http://server/sub-a and http://server/sub-b. I want to alias http://server/sub-a as root so that just going to http://server/ will bring up the contents of sub-a. The problem I face is that when I initially set up a ReverseProxy it negatively affected http://server/sub-b. I know this is a fairly common problem- how have you solved it? 99.9% of my experience is with Apache, so I feel a tad lost in the GUI world of IIS.

  Read the article

• How do I set up a one way trust when some DCs are firewalled off from each other?

  - by makerofthings7

  I have two Windows 2008 forests in Win2003 mode and I need to set up a one way trust between them. The validation button in Domains And Trusts works in one forest but not in the other. I think this is because not all DCs can see all the other DCs. I'm not sure if I need to set up the hosts file, so I did so with company.com in the respective domain along with the relevant DC. (do I need _msdcs _tcp zones etc) How do I set up a one way trust when some DCs are firewalled off from each other?

  Read the article

• Redirect Web Subfolder to Root (/folder to /)

  - by manyxcxi

  I am trying to redirect /folder to / using .htaccess but all am I getting is the Apache HTTP Server Test Page. My root directory looks like this: / .htaccess -/folder -/folder2 -/folder3 My .htaccess looks like this: RewriteEngine On RewriteCond %{REQUEST_URI} !^/folder/ RewriteRule (.*) /folder/$1 What am I doing wrong? I checked my httpd.conf (I'm running Centos) and the mod_rewrite library is being loaded. As a side note, my server is not a www server, it's simply a virtual machine so it's hostname is centosvm. Addition: My httpd.conf looks like so: <VirtualHost *:80> ServerName taa.local DocumentRoot /var/www/html SetEnv APPLICATION_ENV "dev" Alias /taa /var/www/html/taa/public <Directory /var/www/html/taa/public> DirectoryIndex index.php AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost>

  Read the article

• On Ubuntu, how to design a monitor to run a process when a file is written to a directory?

  - by J G

  I want to run a process when a file is written to a directory on Ubuntu. I understand I can write a monitor to do this. (ie not an event based trigger but a 'monitor'). To implement this - other than writing a for loop of infinite duration in C that polls the directory - what steps would you take to implement this? What steps would you take to implement a monitor on Ubuntu that runs a process (another application) when a file is written to a directory? (The reason that you'd do this is the that process writing the file is under a limited set of permissions (eg tomcat6) but the executed process (an existing software package) needs root (ie to run a process in a chroot jail))

  Read the article

• Lost Root and other user passwords

  - by Webnet

  This isn't a huge deal, because there's very little on the server (literally a file or two) that we actually need off of it. But we disabled root logins as a security measure and can't remember any of our other user passwords. I'm assuming that there's nothing we can do at this point to get into the server? I'm sitting next to the box... Update Oops... actually, I need to export an SVN off of this server. So yeah, there's stuff I need.

  Read the article

• Root certificate authority works windows/linux but not mac osx - (malformed)

  - by AKwhat

  I have created a self-signed root certificate authority which if I install onto windows, linux, or even using the certificate store in firefox (windows/linux/macosx) will work perfectly with my terminating proxy. I have installed it into the system keychain and I have set the certificate to always trust. Within the chrome browser details it says "The certificate that Chrome received during this connection attempt is not formatted correctly, so Chrome cannot use it to protect your information. Error type: Malformed certificate" I used this code to create the certificate: openssl genrsa -des3 -passout pass:***** -out private/server.key 4096 openssl req -batch -passin pass:***** -new -x509 -nodes -sha1 -days 3600 -key private/server.key -out server.crt -config ../openssl.cnf If the issue is NOT that it is malformed (because it works everywhere else) then what else could it be? Am I installing it incorrectly? Update I tried changing the certificate attributes, but to no avail: openssl genrsa -des -passout pass:***** -out private/server.key 2048 openssl req -batch -passin pass:***** -new -x509 -nodes -sha256 -days 3600 -key private/server.key -out server.crt -config ../openssl.cnf

  Read the article

• Application outside document root in Apache/CentOS

  - by liz

  I have a PHP application running in Apache on CentOS 6. The document root is pointed to a specific app folder: /var/www/my-project/app I'm trying to get phpMyAdmin running on the same server but I don't want to put it in the application folder. Instead I'd like to put it here /var/www/apps/phpmyadmin I'm using a sub domain for the server. What's the easiest way for me to get access to phpMyAdmin? Another subdomain? sub subdomain? Re-direct a folder?

  Read the article

• Two domains hosted on the same server with different root folder shows up the same homepage

  - by emaillenin

  I have hosted two domains from GoDaddy at Linode VPS. They are mobiletoast.com and lesseltechnologies.com Thought the latter site has a separate index folder, whenever I navigate to it, I get the homepage of mobiletoast.com The strange thing is, I see the expected page (It works), when I open the site from my mobile phone. But when I open the site from my PC (any browser, without any cache, hard refresh), I get the homepage of mobiletoast.com The Linode support team says, they see the correct "It works" page. But I am not able to see that page. This is the output of the command apache2ctl -S root@li339-83:~# apache2ctl -S VirtualHost configuration: wildcard NameVirtualHosts and _default_ servers: *:80 is a NameVirtualHost default server mobiletoast.com (/etc/apache2/sites-enabled/000-default:1) port 80 namevhost mobiletoast.com (/etc/apache2/sites-enabled/000-default:1) port 80 namevhost blog.mobiletoast.com (/etc/apache2/sites-enabled/blog.mobiletoast.com:1) port 80 namevhost lesseltechnologies.com (/etc/apache2/sites-enabled/lesseltechnologies.com:1) port 80 namevhost mobiletoast.com (/etc/apache2/sites-enabled/mobiletoast.com:1) Syntax OK

  Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >