Search Results

Search found 29411 results on 1177 pages for 'ubuntu restricted extras'.

Page 36/1177 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

  • Routing Traffic on Ubuntu to give Raspberry PI Internet Access

    - by Scruffers
    I'm hoping someone can point me in the right direction for setting up my Linux (Ubuntu 12.04) box to route traffic from eth0 to wlan0. I'll try and explain the problem I am trying to solve: I currently have two separate networks: [RaspberryPi/eth0] 192.168.2.2 / 255.255.255.0 ^ | v [Ubuntu/eth0] 192.168.2.1 / 255.255.255.0 And: [Ubuntu/wlan0] 192.168.1.100 / 255.255.255.0 ^ | v [ADSL router] 192.168.1.1 / 255.255.255.0 So currently if I want to access the RaspberryPI I can SSH from the Ubuntu box to the PI. And if I want to use the Internet, I have full access from the Ubuntu box, but nothing from the RaspberryPI - the two networks are partitioned. What I would like to do is configure things so that the RaspberryPI has Internet access via the Ubuntu box and out to the Internet. I tried to create a bridge, but got the message "wlan0: operation not supported" (wireless chipset is Ralink RT3062). I'm sure giving the Raspberry PI Internet access should be easy to do in this configuration, but I am a bit lost - can someone point me in the right direction please?

    Read the article

  • Why can't I install Ubuntu 10.04 on a system that already has Ubuntu 8.04?

    - by Android Eve
    Ubuntu 10.04 is beautiful. I love it. I am dying to install it on my PC, alongside the existing Ubuntu 8.04 (from which I write this message right now). But... it won't let me! When I reach the partitioning stage (manual!) Ubuntu 10.04 sees my two HDDs as one RAID volume. It doesn't see all the partitions I already have in place in /dev/sda and /dev/sdb. Even Windows 7 doesn't behave like this... (yes, I actually managed to install Windows 7 64-bit in dual-boot configuration with Ubuntu 8.04 on this same system). Note: GParted on Ubuntu 10.04 (live CD) sees the partition intended for Ubuntu 10.04 (/dev/sda4) perfectly, but is unable to format it. Any idea how to solve this problem?

    Read the article

  • Ubuntu 10.10 and Windows 7 (TrueCrypt) Multi-boot Problems

    - by Samuel Taylor
    I have now been searching days for a solution but have found nothing. I have Ubuntu 10.10 and Windows 7 with TrueCrypt as a multi-boot. It was working fine for a few weeks until I needed to reinstall Ubuntu. If I have the boot flag on the partition where Windows 7 is install (This is where the boot flags was when working before.), it boots fine in to Windows 7 but when pressing Esc it can't find grub2. If I have the boot flag on the partition where Ubuntu is install, it boots fine in to Ubuntu (by pressing Esc or typing the password) but unable to access Windows. I have tried reinstalling TrueCrypt Boot loader and repairing the header but it have no affect. My Partitions: sda1 - Windows 7 Recovery (GRUB2) sda2 - Windows 7 (TrueCrypt Boot Loader) sda3 - Ubuntu 10.10 (/) sda4 - Extended sda5 - Swap sda6 - Ubuntu (/home) Does anyone have any ideas? Thanks Sam

    Read the article

  • Access Windows VPN DNS from Ubuntu

    - by user46427
    I am using Ubuntu 10.04 to access a Windows VPN. I connect to the VPN from Ubuntu, and when I open a Windows 7 virtual machine (VirtualBox), everything works great ... I can access local network drives, ping local servers, remote into local machines, etc. However, I can do none of this from Ubuntu. With the VPN connected, I cannot even ping anything within the VPN local network. I'm guessing it's a DNS issue that Windows is handling automatically but Ubuntu needs a setting somewhere to tell it to use the DNS servers of the VPN network? Any ideas? I'm a relative novice to Ubuntu, esp. VPN in Ubuntu. [EDIT] Actually, I'm almost positive it is DNS, because if I get the IP address from the Windows VM I can use Terminal Server Client to remote into a machine.

    Read the article

  • Installed Ubuntu 14.04LTS

    - by user291729
    On my laptop which came pre-installed with Windows 8.1. Felt I needed to see the competition for myself to establish which was a better OS. So I followed the channels to dual boot. All seemed fine and I accessed Ubuntu with no issues after selecting this from the menu to select the OS. I should add that the boot method was changed to legacy. However, since using Ubuntu, I no longer have the ability to select the OS. The laptop simply logs straight into Ubuntu. I therefore attempted to access the recovery options, only it appears the Windows 8 bootloader has somehow been corrupted as I am now told to use the Windows 8 recovery disc (which, as this was pre-installed - I do not have). Left with no other alternative, I have scoured these forums without success, and so I am hoping someone in the know (or who has experienced similar) can help. I have tried boot repair again without success. On rebooting I am only presented with a basic splash screen asking me to select Ubuntu, Memtest, Windows 8 Recovery or Windows 8 Bootloader (The bootloaders again require I insert the disc). I have tried Code: cat /boot/grub/grub.cfg df -h sudo fdisk -l cat /proc/partitions # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi if [ "${next_entry}" ] ; then set default="${next_entry}" set next_entry= save_env next_entry set boot_once=true else set default="0" fi if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=800x600 load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ] ; then set timeout=-1 else if [ x$feature_timeout_style = xy ] ; then set timeout_style=menu set timeout=20 # Fallback normal timeout code in case the timeout_style feature is # unavailable. else set timeout=20 fi fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff initrd /boot/initrd.img-3.13.0-29-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { menuentry 'Ubuntu, with Linux 3.13.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry 'Memory test (memtest86+)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi knetbsd /boot/memtest86+.elf } menuentry 'Memory test (memtest86+, serial console 115200)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry 'Windows Recovery Environment (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-7A6A69D66A698FA5' { insmod part_gpt insmod ntfs set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7A6A69D66A698FA5 else search --no-floppy --fs-uuid --set=root 7A6A69D66A698FA5 fi drivemap -s (hd0) ${root} chainloader +1 } menuentry 'Windows 8 (loader) (on /dev/sda3)' --class windows --class os $menuentry_id_option 'osprober-chain-8C88-80F7' { insmod part_gpt insmod fat set root='hd0,gpt3' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 8C88-80F7 else search --no-floppy --fs-uuid --set=root 8C88-80F7 fi drivemap -s (hd0) ${root} chainloader +1 } set timeout_style=menu if [ "${timeout}" = 0 ]; then set timeout=10 fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi if [ "${next_entry}" ] ; then set default="${next_entry}" set next_entry= save_env next_entry set boot_once=true else set default="0" fi if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=800x600 load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ] ; then set timeout=-1 else if [ x$feature_timeout_style = xy ] ; then set timeout_style=menu set timeout=20 # Fallback normal timeout code in case the timeout_style feature is # unavailable. else set timeout=20 fi fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff initrd /boot/initrd.img-3.13.0-29-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { menuentry 'Ubuntu, with Linux 3.13.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry 'Memory test (memtest86+)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi knetbsd /boot/memtest86+.elf } menuentry 'Memory test (memtest86+, serial console 115200)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry 'Windows Recovery Environment (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-7A6A69D66A698FA5' { insmod part_gpt insmod ntfs set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7A6A69D66A698FA5 else search --no-floppy --fs-uuid --set=root 7A6A69D66A698FA5 fi drivemap -s (hd0) ${root} chainloader +1 } menuentry 'Windows 8 (loader) (on /dev/sda3)' --class windows --class os $menuentry_id_option 'osprober-chain-8C88-80F7' { insmod part_gpt insmod fat set root='hd0,gpt3' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 8C88-80F7 else search --no-floppy --fs-uuid --set=root 8C88-80F7 fi drivemap -s (hd0) ${root} chainloader +1 } set timeout_style=menu if [ "${timeout}" = 0 ]; then set timeout=10 fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### john@john-SVE1713Y1EB:~$ ^C john@john-SVE1713Y1EB:~$ ^C john@john-SVE1713Y1EB:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda9 84G 7.1G 73G 9% / none 4.0K 0 4.0K 0% /sys/fs/cgroup udev 3.9G 4.0K 3.9G 1% /dev tmpfs 794M 1.4M 793M 1% /run none 5.0M 0 5.0M 0% /run/lock none 3.9G 80K 3.9G 1% /run/shm none 100M 52K 100M 1% /run/user /dev/sdc1 7.5G 2.2G 5.4G 29% /media/john/DYLANMUSIC /dev/sr0 964M 964M 0 100% /media/john/Ubuntu 14.04 LTS amd64 /dev/sdb1 1.9T 892G 972G 48% /media/john/Storage Main WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x4e2ccf75 Device Boot Start End Blocks Id System /dev/sda1 1 1953525167 976762583+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdc: 8011 MB, 8011120640 bytes 41 heads, 41 sectors/track, 9307 cylinders, total 15646720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdc1 8064 15646719 7819328 b W95 FAT32 Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc7d968ff Device Boot Start End Blocks Id System /dev/sdb1 64 3907029119 1953514528 7 HPFS/NTFS/exFAT major minor #blocks name 8 0 976762584 sda 8 1 266240 sda1 8 2 1509376 sda2 8 3 266240 sda3 8 4 131072 sda4 8 5 841012780 sda5 8 6 358400 sda6 8 7 35376128 sda7 8 8 1024 sda8 8 9 89501696 sda9 8 10 8337408 sda10 11 0 987136 sr0 8 32 7823360 sdc 8 33 7819328 sdc1 8 16 1953514584 sdb 8 17 1953514528 sdb1 I am no expert on this and I'm at a loss as how to correct this without having to re-format everything and reinstall Windows 8. However, if I'm to try using Ubuntu again then there is the risk this problem may come back. Again, I did not do anything manually - the installer did everything (with the exception of changing the boot to Legacy to allow the booting of another bootloader). LiveCD works but doesn't give me the options that I've seen here and as mentioned earlier, only boot recovery only gives me the options as mentioned earlier. Also this fails to load via USB (possibly because HDD comes before USB in the boot order?). Being used to a Windows environment, the Ubuntu (and Linux) environment is a dive at a less than comfortable depth at present (but one I fully intend to get to grips with - especially the commands being more common via Terminal). I very much appreciate the help with this guys.

    Read the article

  • Ubuntu option vanishes after setting up windows XP(?) [closed]

    - by Ravi
    I have installed both windows XP as well as Ubuntu 9.04 on my machine.I can choose between them using dual boot option at the startup.Up to this, it is fine. But unfortunately when my XP crashes, I need to install XP again.But when I do it,after installing XP successfully, dual boot option no longer appears at the startup. So the Ubuntu goes in vein. What is the problem here? How do I solve it?

    Read the article

  • Iptables on ubuntu Ubuntu 10.04.1 not working

    - by Kevin
    I am trying to block an IP address from accessing my server by using iptables, but didn't succeed. Here are the commands that I used. (after these commands, I still keep seeing 50.18.12.86 sending request to my Apache server). sudo iptables -F sudo iptables -I OUTPUT -s 50.18.12.86 -j REJECT sudo iptables -I INPUT -s 50.18.12.86 -j REJECT sudo iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination REJECT all -- 50.18.12.86 0.0.0.0/0 reject-with icmp-port-unreachable Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination REJECT all -- 50.18.12.86 0.0.0.0/0 reject-with icmp-port-unreachable I have tried DROP instead of REJECT, but doesn't help.

    Read the article

  • tightvncserver on ubuntu 12.04 server with ubuntu-desktop installed no unity

    - by Leon
    The tight vnc server is running but unity does not get loaded. I changed the xstartup to: unset SESSION_MANAGER . /etc/X11/xinit/xinitrc [ -x /etc/vnc/xstartup ] && exec /etc/vnc/xstartup [ -r $HOME/.Xresources ] && xrdb $HOME/.Xresources gnome-session & But still no unity. In wich log file can I look for the errors containing the starting of tightvncserver in combination with gnome and unity? Can somone point me at documentation abou tthe loading/starting sequence of Xserver, windows manager etc.? Is this a known issue?

    Read the article

  • Ubuntu Lenove OCZ Agility3 - No Grub after install

    - by Michael
    I've tried a dualboot (Win7 + Ubuntu) installation it on a Lenovo E330 with Agility3 240 Gigs... Conclusions: Ubuntu:: Ubuntu 12.04 x86_64 ( 21.06.2012 ) is not able to install grub in a bootable way. Grub will be installed and does update-grub during Installation, recognizes also the Win OS. But after a restart it boots directly to Windows.This is directly connected to the OCZ Agility3. On a good old fashion harddisk (those with the moving parts) Ubuntu is capable to install grub with no problem in a bootable manner. PinguyOS:: PinguyOS 12.04 LTS x86_64 (which is a Ubuntu based distro) is able to handle the Grub installation on OCZ Agility3. However they both use Grub 1.99... What i did:: Installed Windows. Installed Ubuntu. Installed PinguyOS. Grub Updates:: Grub updates are only through Pinguy OS possible, this means you have to edit the Ubuntu Grub entries manually after Kernelupdates on Ubuntu, in the PiguyOS sytem.. What i've already tried: Firmwareupgrade OCZ (livestick, successfull) Install Ubuntu Grub to sda Install Ubuntu Grub to sdc (Ubuntu Partion) Install Ubuntu Grub to /boot update-grub manually after install restore grub any ideas appreciated..

    Read the article

  • Cannot Restore GRUB (Ubuntu 11.04 + Win 7)

    - by Benny
    I'm trying to fix GRUB on my PC, but I'm running into serious issues doing so. Any help would be greatly appreciated as I'm completely crippled right now. Here is the sequence of events for this PC: Installed Windows 7 Split full disk into two partitions (one for win7 and one for multimedia) Long time passed Split one of the partitions into two again Installed Ubuntu 11.04 on new partition A little time passed Windows 7 acting up, reinstall Ubuntu GRUB gone Tried restoring GRUB by mounting and grub-install from live USB Tried switching to a live CD instead of USB (thinking it might be the drive) Now I don't see GRUB and I'm getting "input/output" errors An example i/o error: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xbe86aff6 Device Boot Start End Blocks Id System /dev/sda1 * 1 48727 391393280 7 HPFS/NTFS /dev/sda2 48727 77063 227612647+ 7 HPFS/NTFS /dev/sda3 77063 91202 113566721 5 Extended /dev/sda5 77063 90622 108908544 83 Linux /dev/sda6 90622 91202 4657152 82 Linux swap / Solaris ubuntu@ubuntu:~$ sudo mount /dev/sda5 /mnt ubuntu@ubuntu:~$ sudo grub-install --root-directory=/mnt /dev/sda mkdir: cannot create directory `/mnt/boot': Input/output error ubuntu@ubuntu:~$ cd /mnt ubuntu@ubuntu:/mnt$ ls ls: cannot access etc: Input/output error

    Read the article

  • Ubuntu One - Files API - Cloud - More detailed info somehwere?

    - by Brian McCavour
    I am just starting on a mobile app for Ubuntu One, and I'm reviewing the info at https://one.ubuntu.com/developer/files/store_files/cloud I find the information a bit lacking though. It's a nice reference, but for someone not familiar with it, I had to goggle search to find out what a "volume" was exactly (its kind of obvious, but never hurts to know the specifics) There's also things like: GET /api/file_storage/v1/volumes Return a JSON list of Volume Representations, one for each volume. A volume is a synced folder, or the Ubuntu One folder, owned by the user. Note that all volume paths begin with ~.: ... but there's no such thing as a JSON "list". Does it mean array ? And other things... So I was wondering if here existed another page with more detailed information. Maybe some sample request / responses or something? I could just write a little proof of concept app to answer some of these questions... but I prefer not to unless I have to. Thanks

    Read the article

  • Problems to boot, Ubuntu entry does not work anymore

    - by user104108
    A few months I decided to install Ubuntu 12.04 on my PC alongside with my Windows 7 partition. In order to do that and avoid any mistake, I followed these steps: http://www.linuxbsdos.com/2012/05/17/how-to-dual-boot-ubuntu-12-04-and-windows-7/2/ Everything was going well until I decided to update to the 12.10 realese. I don't know what happened, but after I updated my Ubuntu, it stoped working, it didn't even launched, when I turned on my pc and choose to run "Ubuntu 12.04" on the Grub Screen, a weird messaged appeared. Well, so I decided to install the Ubuntu 12.10 and forget about the 12.04 partition, no problem. I erased the partitions used for the Ubuntu 12.04 with EaseUS partition Manager. However, when I start my PC, there is still the option of "Ubuntu 12.04" to chose, is that bad? And what about now, can I use the Windows Installer of Ubuntu ( http://www.ubuntu.com/download/help/install-ubuntu-with-windows ) to install the Ubuntu 12.10 ? What should I do to have Ubuntu 12.10 and Windows 7 in dual boot again? Thanks; Thales.

    Read the article

  • Error after updating from Ubuntu 10.04 to Ubuntu 10.10

    - by Emerson Hsieh
    Note: This was posted 6 months ago. Please read my answer below. I updated to 10.10 from 10.04 last week. After rebooting it shows "error "prefix" not found" for half a second and then it's stuck at a flashing line forever!! I installed 10.04 again and I didn't upgrade to 10.10 directly because the flashing line looks creepy and I don't want to see it again. What should I do now?? PS: I want to upgrade to 10.10 I am using wubi I hate that flashing line

    Read the article

  • Dual boot problem with ubuntu 12.04 and Vista

    - by vendella dahlahdoo
    Greetings from New Zealand. I have installed Microsoft Windows Vista and then installed Ubuntu 12.04 on my refurbished Compaq nx8220 laptop. I get the following infamous head hurting prompt continually. error: no such partition. grub rescue> Have tried most of the common recommended solutions. Live-CD then install Boot-Repair through the Terminal didn't work. It repaired all the linux stuff when restoring grub and then can't boot into Windows Vista. When I use Boot-Repair to fix the MBR, then I can't boot into Ubuntu. Tried installing BCD 2.1 in Vista and tried all the options one after another in BCD. Still no Ubuntu when selected through the options menu from BCD on restart/reboot. I have tried the boot repair option on the Ubuntu server CD-ROM, tried installing earlier versions of Ubuntu 11.04, 11.10, and Ubuntu server 11.10 and 12.04. Still the same result. I tried deleting the Ubuntu partitions through Vista a number of times and reinstalling Ubuntu. I have been trying and retrying all the options in Boot-Repair in different combinations for the past week and a half. I have tried at least 10 times installing and reinstalling Ubuntu. I really love Ubuntu and believe I have exhausted most of the recommended solutions and have spent too much time on this. Its driving me nuts!! please can someone help, I have finally given up (sigh). The following are some outputs from Boot-Repair from my last attempts. http://paste.ubuntu.com/1019227 http://paste.ubuntu.com/1019264 I was only allowed to post two links being a newbie. The only thing left for me to do is the flying Samoan dropkick laptop trick. Thanks in advance. Francis.

    Read the article

  • Ubuntu Light Shuts Out Future Ubuntu Moblin/MeeGo Remixes

    <b>IT World:</b> "When Canonical announced its Ubuntu Light platform for netbooks and platforms Monday morning, a lot of fuss was made about the new Unity interface, the capability of Ubuntu Light to act as an instant-on environment for users of these devices who just want to surf, and the general coolness of the plan."

    Read the article

  • Ubuntu 10.04: Where Ubuntu goes from here

    <b>Cyber Cynic:</b> "The new Ubuntu release is almost here and I like the Ubuntu 10.04 desktop a lot. As a Linux expert, it's a little too simple for my personal tastes, but it's the best beginner Linux out of the box I've ever seen."

    Read the article

  • Dual head setup for Ubuntu 10.04.1 and Windows XP Pro with same hardware configuration

    - by mejpark
    Hello. I have a Dell OptiPlex 360 workstation at work, with 2 x ATI RV280 [Radeon 9200 PRO] graphics cards installed, which are attached to two identical 19" HII flat panel monitors. I'm using the open source Radeon driver with Ubuntu, and the proprietary drivers with Windows. The good news is that dual head configuration works for both OSes. The bad news is, I have to use a different hardware configuration for each OS to achieve this. Hardware config #1: Dual monitors work for Windows XP Pro like this: First display -> external VGA port Second display -> DVI input on gfx card Hardware config #2: Dual monitors work for Ubuntu 10.04.1 like this: First display -> VGA port on gfx card Second display -> DVI input on gfx card I connected up the displays according to Config #2 and booted up Windows, which resulted in a mirror image on both screens. I was unable to login, as the login box was not visible. I unplugged the VGA lead from gfx card and plugged it into the external VGA port (Config #1) - Windows dual head works again, but the VGA-connected screen is not recognised by Ubuntu and remains in standby mode. Is it possible to configure a dual head setup for Ubuntu using Config #1, or am I missing something? I tried setting up dual monitors using Config #1, this morning which didn't work. By default, there is no xorg.conf file in Ubuntu 10.04.1, so I generated one using: $ sudo X :2 -configure X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux harrier 2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=a34c1931-98d4-4a34-880c-c227a2936c4a ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.2.log", Time: Mon Sep 13 10:02:02 2010 List of video drivers: apm ark intel mach64 s3virge trident mga tseng ati nouveau neomagic i740 openchrome voodoo s3 i128 radeon siliconmotion nv ztv vmware v4l chips rendition savage sisusb tdfx geode sis r128 cirrus fbdev vesa (++) Using config file: "/home/michael/xorg.conf.new" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (II) [KMS] No DRICreatePCIBusID symbol, no kernel modesetting. Xorg detected your mouse at device /dev/input/mice. Please check your config if the mouse is still not operational, as by default Xorg tries to autodetect the protocol. Xorg has configured a multihead system, please check your config. Your xorg.conf file is /home/michael/xorg.conf.new To test the server, run 'X -config /home/michael/xorg.conf.new' ddxSigGiveUp: Closing log $ sudo X -config /home/michael/xorg.conf.new Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again. Please consult the The X.Org Foundation support at http://wiki.x.org for help. ddxSigGiveUp: Closing log I then booted Ubuntu in failsafe mode, dropped into root shell, and executed $ X -config /home/michael/xorg.conf.new again. The screen went blank and turned off, so I reset the machine. There must be a way round this. Any help to set up a dual head config for Ubuntu using Config #1 would be hugely appreciated. TIA, Mike

    Read the article

  • HTG Explains: What’s the Difference Between Ubuntu & Linux Mint?

    - by Chris Hoffman
    Ubuntu and Linux Mint are two of the most popular desktop Linux distributions at the moment. If you’re looking to take the dive into Linux – or you’ve already used Ubuntu or Mint – you wonder how they’re different. Linux Mint and Ubuntu are closely related — Mint is based on Ubuntu. Although they were very similar at first, Ubuntu and Linux Mint have become increasingly different Linux distributions with different philosophies over time. How To Customize Your Wallpaper with Google Image Searches, RSS Feeds, and More 47 Keyboard Shortcuts That Work in All Web Browsers How To Hide Passwords in an Encrypted Drive Even the FBI Can’t Get Into

    Read the article

  • Create bootable USB install image from command line?

    - by j-g-faustus
    I'm trying to create a bootable USB image to install Ubuntu on a new computer. I have done this before following the "create USB drive" instructions for Ubuntu desktop, but I don't have an Ubuntu desktop available. How can I do the same using only the command line? Things I've tried: Create bootable USB on Mac OS X following the ubuntu.com "create USB drive" instructions for Mac: Doesn't boot. usb-creator: According to apt-cache search usb-creator and Wikipedia usb-creator only exists as a graphical tool. "Create manually" instructions at help.ubuntu.com: None of the files and directories described (e.g. casper, filesystem.manifest, menu.lst) exist in the ISO image, and I don't know what has replaced them. (At my disposal is Mac OS X and Ubuntu server; I have neither Ubuntu desktop nor Windows.)

    Read the article

  • I cannot play some WMA files

    - by Lucio
    I did a backup of several music files from my older Windows XP system. Now I can play all the .MP3 files but not all the .WMA. There are some kinds of WMA files that can be reproduced without problems, may refute this in the picture below. The right file can be played, the left isn't. I have long been looking different sites, Q&A from here, installing many packages but not luck. An example is this answer. What can I do? My system: Ubuntu 11.10 32b. Player: Banshee & VLC

    Read the article

  • Acer Aspire one is falling apart on Ubuntu

    - by Narcolapser
    Question: How do I have my netbook detect and install hardware? Info: I have an Acer Aspire One, it came with windows XP and I loaded it with Win7. I decided I wanted to change to Ubuntu so I tried Ubuntu netbook remix, which failed horribly, and so after attempting 3 or so other OS's I ended with Ubuntu Desktop 9.10. Which worked fine for a while, but there were some minor issues so I asked a question about it here and decided to change my OS again. This last weekend I tried mandriva like that guy in my other question suggested, no success. when I had though my netbook lost the ability to use it's touch pad, I didn't think much of it, just thought it must be a driver or something. But When Mandriva failed, and I also while I was at it tried Damn small linux and Debian, which both failed to, I decided to switch back to Ubuntu Desktop(some where in here my keyboard stopped working for one attempt to). But first I gave the netbook remix one more try. it worked this time, with the exception of it didn't have any networking. I thought it was a driver issue again and finished the weekend with ubuntu desktop 9.10 again. But now things get really crazy. it doesn't know it has a wireless card or an ethernet card. It doesn't know my phone is connected trying to provide wireless broadband either. I'm clueless on what could be the problem. And with only a minimal amount of experience with Ubuntu can't navigate the entire interface with only my keyboard(it doesn't detect a USB mouse when I plug it in, it had when I installed it. in fact the network interfaces were working just fine when I live boot ubuntu to installed it). Even so, I don't know where to go or what to do to make it recognize it's hardware. I'm in a dire situation, any help is welcome.

    Read the article

  • Apt pin and self hosted apt repo

    - by Hamish Downer
    We have our own apt/deb repository with a handful of packages where we want to control the version. Crucially this includes puppet, which can be sensitive to versions being different. I want our desktops to only get puppet from our repository, but also for people to be able to add their own PPAs, enable backports etc. The current problem we have is backports on Ubuntu Lucid. Some important lines from /etc/apt/sources.list: deb http://gb.archive.ubuntu.com/ubuntu/ lucid main restricted universe multiverse deb http://gb.archive.ubuntu.com/ubuntu/ lucid-updates main restricted universe multiverse deb http://gb.archive.ubuntu.com/ubuntu/ lucid-backports main restricted universe multiverse deb http://security.ubuntu.com/ubuntu/ lucid-security main restricted universe multiverse deb http://deb.example.org/apt/ubuntu/lucid/ binary/ And in /etc/apt/preferences.d/puppet: Package: puppet puppet-common Pin: release a=binary Pin-Priority: 800 Package: puppet puppet-common Pin: release a=lucid-backports Pin-Priority: -10 Currently policy says: $ sudo apt-cache policy puppet puppet: Installed: (none) Candidate: (none) Package pin: 2.7.1-1ubuntu3.6~lucid1 Version table: 2.7.1-1ubuntu3.6~lucid1 -10 500 http://gb.archive.ubuntu.com/ubuntu/ lucid-backports/main Packages 100 /var/lib/dpkg/status 2.6.14-1puppetlabs1 -10 500 http://deb.example.org/apt/ubuntu/lucid/ binary/ Packages 0.25.4-2ubuntu6.8 -10 500 http://gb.archive.ubuntu.com/ubuntu/ lucid-updates/main Packages 500 http://security.ubuntu.com/ubuntu/ lucid-security/main Packages 0.25.4-2ubuntu6 -10 500 http://gb.archive.ubuntu.com/ubuntu/ lucid/main Packages If I use n= instead of a= then I get Package pin: (not found) I'm just plain confused at this point as to what I should use. Any help appreciated.

    Read the article

  • Ubuntu cannot resolve unmet dependency

    - by DisgruntledGoat
    I'm trying to install a package on my Ubuntu 8.10 server. However, I get this message: The following packages have unmet dependencies. webmin: Depends: apt-show-versions but it is not going to be installed E: Unmet dependencies. Try ‘apt-get -f install’ with no packages (or specify a solution). So I run apt-get -f install which offers to install apt-show-versions and libapt-pkg-perl. After selecting to install without verification, I get these errors: Err http://gb.archive.ubuntu.com intrepid/universe libapt-pkg-perl 0.1.22build1 404 Not Found Err http://gb.archive.ubuntu.com intrepid/universe apt-show-versions 0.13 404 Not Found Failed to fetch http://gb.archive.ubuntu.com/ubuntu/pool/universe/liba/libapt-pkg-perl/libapt-pkg-perl_0.1.22build1_i386.deb 404 Not Found Failed to fetch http://gb.archive.ubuntu.com/ubuntu/pool/universe/a/apt-show-versions/apt-show-versions_0.13_all.deb 404 Not Found E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? I've tried running apt-get update and adding --fix-missing as suggested, but neither works. Where do I go from here?

    Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >