Search Results

Search found 12899 results on 516 pages for 'usb boot'.

Page 36/516 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

• Mouse Not Detected & Network Not Connected After Installing Ubuntu 12.04 Desktop via Live USB

  - by albus_severus

  I just recently (+- 30 minutes ago) install Ubuntu 12.04 Desktop on my pc (dual boot) via Live USB (i check the "automatically install upgrade" option when installing it). unfortunately, at the login screen after the installation finished (after reboot), i cannot use my mouse! also, an error message occur saying that network connection is not available. but, when i restart again and using the "try Ubuntu without installing" in the Live USB, the problems didn't occur. i tried to googling this but failed to find any solution. and yes, i am totally green on Ubuntu and Linux. so, please, help me on this. thanks in advance.

  Read the article

• Usb/vga not recognized anymore

  - by Peter Raeves

  I don't know what happened, but yesterday everything worked fine, but when I woke up this morning and booted my computer to Ubuntu 14.04 a bunch of hardware isn't recognized anymore. I use a dual monitor setup with dvi-d and vga, but the vga screen isn't recognized anymore and the dvi-d monitor is recognized as "Built-in Display" while I'm not on a laptop. Also every device connected through usb isn't recognized anymore either. I have a keyboard with the blue round connector, which still works, so I can still log in though. The computer goes slower than usual and I have no idea what has happened. Can anybody point me in the direction I should start looking, because this is scary! I just checked and both the front and back sound connectors stopped working also :/ Edit: The devices connected through USB are recognized as they all show up using sudo lsusb, Ubuntu just doesn't let me use them anymore.

  Read the article

• Problem with DualBooting Ubuntu 13.10 and Win7

  - by VinArrow

  this is my first post here on AskUbuntu, not first time using it though. I wanted to install Ubuntu 13.10 on my PC to have all my work stuff there and leave Win7 for gaming. So i did my research on how to Dual Boot when you already have Win7 installed, here are the steps i took Used Disk Management on Win7 and shrunk that partition, leaving 80GB free for Ubuntu. Made a Bootable pendrive following the instructions on Ubuntu`s website. During the installation steps there was supposed to be a Install alongside Win7, but there wasnt, so i chose Something else. Everything was fine and i was able to install Ubuntu no problem on my unallocated 80GB partition (76GB Ubuntu + 4GB swap) There was a prompt for me to restart my PC and so I did expecting to see the dual boot screen (grub right?) Now, when i restarted my PC, Grub never showed up and it booted straight to Windows. Then I did some more research and found out that that could happen. Tried three things then Plugging in bootable pendrive again and selected Try Ubuntu without installing. Then i followed some instructions found here (How can I repair grub? (How to get Ubuntu back after installing Windows?)) and i could chroot into my Ubuntu install just fine. Repaired grub as instructed on that link, restarted the PC and booted straight into Win7 again. Again, used the bootable pen drive to Try Ubuntu... and used the Boot-repair tool (recommended repair). Again, booted straight into Win7. Lastly, i installed easyBCD on my Win7 and made a new entry for Ubuntu (Linux/BSD). When i rebooted the PC, there was the option to choose between Win7 and Linux, chose linux and it didnt work, taking me straight to a command line-like enviroment that read Minimum bash like scripting or something, as if I didn`t have a Linux OS installed. So, I thought I`d try and repair my Ubuntu install. And during the Installation method step there was the choice to install alongside Ubuntu 13.10! and that right there drove me crazy. Here is a screenshot of gparted showing how things are set up now http://imageshack.us/f/801/77u3.png/ Notice on the left-hand side how i can access my installation files just fine. sdb1- win7 reserved space, sdb2- win7 OS, sdb3- 76GB ubuntu install, sdb5- 4GB swap area. Does anyone know why my Ubuntu 13.10 is not being recognized? and what should I do to get it working? Thanks and sorry for the long read and bad english! (BIOS = legacy)

  Read the article

• Can I launch Windows 8 with grub?

  - by Laurbert515

  I accidentally deleted the boot loader for Windows 8 (I think). Here is the situation: I just got a new computer with 2 HDD (sda, sdb). Now, all of the windows OS was installed on sdb (all except for about 210 MB on sda). I formatted sda and installed Kubuntu 12.04.2 (which only loads the terminal because it says it can't find a screen, but that's another story!) Now, my Windows 8 data and NTFS partitions, etc. are still on sdb and untouched. Unfortunately, I cannot see an option to boot into Windows 8 in grub, so is there a way that I can go about using grub to point to the Windows 8 OS? The only other option I can think of is to buy a fresh copy of Windows 8 and install it fresh (no, I didn't create a backup USB because I'm an idiot ...)

  Read the article

• Distro that I can load to ram?

  - by NullUserException

  Is there a modified version of Ubuntu that I can choose to load to RAM on start up? Kinda like the LiveCD, but that can be easily modified (ie: I can install stuff) when I choose to boot from disk. The idea is to install it to a USB drive. I know there's something similar but slax is lacking in many departments. A "full" version Ubuntu would be better. A LiveUSB installation seems to be pretty close to what I want, but apparently I have to choose whether or not it will be persistent by the time I install it. I want to be able to choose that every time I boot.

  Read the article

• Samsung series 9 np900x4c-a03us Dual boot windows 7

  - by rowntreerob

  how do i get USB install of 12.04 installed? how do i change the BIOS? how do i partition the disk for dual boot? Web instructions for USB ISO bootable image were confusing. Series 9 has new, UEFI compatible BIOS - there is a gotcha involving "fast BIOS Mode" The native windows install included 2 partitions that were hard to get rid of: 21GB NTFS for "Samsung-rec" ... recovery 8GB for Hibernation both of the above were hard to get rid of in windows.

  Read the article

• Ubuntu 12.04 boot only when USB drive is connected

  - by Ninad Kochkar

  I freshly installed "Ubuntu 12.04" on my Dell Lattitude D830. While I am able to work on it, there is a starange problem while booting my laptop. It doesn't boot unless the USB drive which was used to install it is connected. It looks like the OS is installed on hard drive, but the boot record is in USB. However, I am not sure on this. I am not able to figure out the problem and need your help in this regard.

  Read the article

• UEFI hardware and dual booting with windows

  - by user39803

  I've been struggling for 3 days trying to dual boot Ubuntu 11.10 and Windows 7. I want to use an SSD for my Ubuntu installation and an hdd for Windows. I realized that I have to install windows first and then ubuntu, and so I did that. When I first install windows it boots fine from my hdd, but when I add ubuntu on my ssd and restart, I get a black screen with a blinking cursor. I've read many forums where this is asked but haven't found a single solution that works. I've tried boot repair. It told me to make a fat ESP partition and I did that as well but it still doesn't work. I'm a noob and any suggestions would be really appreciated.

  Read the article

• Ubuntu Doesn't Start from USB After Installation

  - by Fred Venus

  My computer refuses to boot from the USB even after I change everything that I can possibly think of on my motherboard's BIOS. But I have booted from the USB twice in the past. The first time is when I first got the computer and needed to install a new operating system. The second time is when I installed Windows onto the whole hard drive and needed to reinstall Ubuntu. It seems that it only refuses to boot if there is already an existing installation of Ubuntu on the hard drive. Any ideas on what is going on?

  Read the article

• No such device = Grub Rescue 13.10

  - by LittleBeard

  Noob here. I just installed 13.10 yesterday And it booted up for me several times and all was well. Then this morning when I went to boot I received a "No such device" error and a "grub rescue" command line prompt. I tried running the live disc and re-installing Ubuntu 13.10 However that was a fail. The same messages kept occurring. Then I tried to boot up in Windows 7. Also a fail. I then attempted to run a Windows 7 restore disc. You guessed it - Fail. This sucks. What do I do?

  Read the article

• Ubuntu 12.04 does not start

  - by ferr

  Im using Lenovo G580. I installed Win7 first, two months ago. Now, i want to install Ubuntu 12.04. I used usb for installation. It went very well, but when i was reboot laptop after installation, it started Win7 not Ubuntu or bootloader for choice. LiveUbuntu is working very well. I tried install ubuntu a couple of times from other .iso. I tried recover Grub. When i change "boot" flag in gparted to partition with Ubuntu, BIOS show me error "missing operating system".("boot" flag is optionally on Windows partition c:/). Can it be hardware mistake? Or i did some mistakes?

  Read the article

• True live USB: Fully Functional

  - by jhewitt3476

  I can't seem to have the affect I'm looking for on a "Live Ubuntu" I want to run it from the USB drive, a fully functional, fully upgradable version. I do not want to use as a "trial version", or to set up a dual boot or run in a virtual system. I have kids that are killing my computer & everything on my HD, they need their own OS & drive but don't have the $$$ for a laptop for them, I just want it to work on the USB the same way it works on the C: drive

  Read the article

• Windows not shown in Grub after installing 12.10

  - by rowanquigley

  I just installed 12.10 alongside Windows 7. I split my partition into two because disk reader during the installation didn't recognize Windows 7 as being installed on the computer. It installed correctly and I restarted only to find out it wasn't recognized in Grub also and booted straight to Ubuntu. I read this post and thought of using boot-repair would be fine but I gain this error: gpt detected. Please create bios-boot partition (>1MB, unformed filesystem, bios_grub flag). This can be performed via tools such as Gparted. Then try again. I've no idea what it means or what to do next. Suggestions would be appreciated and I have lost my Windows installation disk and I really don't want to have to go looking for it.

  Read the article

• 12.04 installation started to black screen during boot today

  - by Cedric

  NOTE: Most of this question is now irrelevant. UPDATE 3 summarizes the problem as it stands. I've been running 12.04 on my Lenovo laptop for one month now (updated from 11.04), and I have not had any significant problem until today. This morning, when I boot, I pass the Grub screen, then I get to the purple loading screen with dots as usual, then for some reason I got to the terminal login, with no GUI. startx gives me a black screen. Ctrl+F7-F8 didn't help either. It's similar to: After the update today no graphical interface anymore - 12.04 I followed the instructions at the end, to flush the ATI drivers (which I had installed), and fall back to the community drivers. That made me lose the login! Now I just get a black screen after the Ubuntu loading screen. I can still access the console through recovery, and I've gotten into VESA mode once or twice (not reproducible, for some reason). I've tried various permutations of xorg.conf, without success. Xorg -configure fails for now, though I might be able to get it to work. apt-get update/upgrade doesn't improve anything either. However, both Windows and the 12.04 Live CD still work beautifully, and I know that all my data is still there. Is there any way that I could somehow take the configuration from the Live CD and roll with it? I know that I could reinstall, but that sucks, frankly, especially given that there's no straight-forward way of keeping the home (which, incidentally, is unaccessible from the Live CD) Thank you. Update: it seems that the fglrx drivers are still active, even after I've --purged them. From Xorg.0.log: [ 18.235] (WW) fglrx(0): *********************************************************** [ 18.235] (WW) fglrx(0): * DRI initialization failed * [ 18.235] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible * [ 18.235] (WW) fglrx(0): * 2D and 3D acceleration disabled * [ 18.235] (WW) fglrx(0): *********************************************************** [ 18.235] Fatal server error: [ 18.235] AddScreen/ScreenInit failed for driver 0 There's also a mention of the "fbdev" module. What is it? PARTIALLY SOLVED: I've undone the damage from the fglrx purge. I'm still mystified as to why uninstalling the packages didn't kill fglrx entirely, but I've now recovered the prompt. The solution to the DRI initialization error was to add radeon.modeset=0 to the GRUB boot options. So I'm back to being dropped to a prompt without any GUI. startx gives me a bunch of messages, though no obvious errors. I have little reason to suspect the video drivers, as they worked fine before today. There is no apparent error message in any of the log files. UPDATE: When I startx, I get an error, Plymounth command failed mountall: Disconnected from Plymouth This is all over the Internet, but I have not found anything that works for me yet. UPDATE 3: If I press ESC during boot, the splash screen (Plymouth!) disappears, and I no longer have any error from Plymouth. The last error message is: Stopping mount filesystems on boot I can then Ctrl+Alt+F1 to get the TTY1, but startx still does not work. Sadly, the Internet knows nothing about this error message, and neither do I. Help!

  Read the article

• Can I get an adapter for usb 3.0 to gigabit, or a gigabit switch with usb 3.0?

  - by techaddict

  Basically I want to be able to attach USB 3.0 external portable hard drives to my network and maintain at least gigabit speeds. I can think of four ways to do this, two of which I know exist: 1) NAS - get an NAS which features USB 3.0 and gigabit 2) Gigabit router with a USB 3.0 port and I want to know if these two exist: 3) gigabit switch (multiple gigabit ports) with at least one USB 3.0 port 4) USB 3.0 to gigabit adapter The gigabit adapter would be similar to this: http://www.addonics.com/products/nas30u2.php except that that is only USB 2.0 so it is not true gigabit, as gigabit is 125MBps but USB 2.0 is only 60MBps, so that adapter only has a maximum transfer speed of 60MBps and the "gigabit" is practically useless.

  Read the article

• Motherboard/PSU crippling USB and Sata

  - by celebdor

  I very recently bought a new desktop computer. The motherboard is: Z77MX-D3H and the power supply is ocz zs series 550w. The issue I have is that once I boot to the operating system (I have tried with fedora and Ubuntu with kernels 2.6.38 - 3.4.0), my hard drive (2.5" Magnetic) occasionally makes a power switch noise and it resets. Needless to say, when this drive is the OS drive, the OS crashes. I also have a SSD that works fine with the same OS configurations, but if I have the magnetic hard drive attached as second drive, it works erratically and the reconnects result in corrupted data. I also noticed that whenever I plug an external hard drive USB2.0 or USB3.0 to the computer the issue with the reconnects is even worse: [ 52.198441] sd 7:0:0:0: [sdc] Spinning up disk... [ 57.955811] usb 4-3: USB disconnect, device number 3 [ 58.023687] .ready [ 58.023914] sd 7:0:0:0: [sdc] READ CAPACITY(16) failed [ 58.023919] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.023932] sd 7:0:0:0: [sdc] Sense not available. [ 58.024061] sd 7:0:0:0: [sdc] READ CAPACITY failed [ 58.024063] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024064] sd 7:0:0:0: [sdc] Sense not available. [ 58.024099] sd 7:0:0:0: [sdc] Write Protect is off [ 58.024101] sd 7:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 58.024135] sd 7:0:0:0: [sdc] Asking for cache data failed [ 58.024137] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 58.024400] sd 7:0:0:0: [sdc] READ CAPACITY(16) failed [ 58.024402] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024405] sd 7:0:0:0: [sdc] Sense not available. [ 58.024448] sd 7:0:0:0: [sdc] READ CAPACITY failed [ 58.024450] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024451] sd 7:0:0:0: [sdc] Sense not available. [ 58.024469] sd 7:0:0:0: [sdc] Asking for cache data failed [ 58.024471] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 58.024472] sd 7:0:0:0: [sdc] Attached SCSI disk [ 58.407725] usb 4-3: new SuperSpeed USB device number 4 using xhci_hcd [ 58.424921] scsi8 : usb-storage 4-3:1.0 [ 59.424185] scsi 8:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6 [ 59.424406] scsi 8:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6 [ 59.425098] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 59.425176] ses 8:0:0:1: Attached Enclosure device [ 59.425248] ses 8:0:0:1: Attached scsi generic sg3 type 13 [ 61.845836] sd 8:0:0:0: [sdc] 976707584 512-byte logical blocks: (500 GB/465 GiB) [ 61.845838] sd 8:0:0:0: [sdc] 4096-byte physical blocks [ 61.846336] sd 8:0:0:0: [sdc] Write Protect is off [ 61.846338] sd 8:0:0:0: [sdc] Mode Sense: 47 00 10 08 [ 61.846718] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.846720] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.848105] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.848106] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.857147] sdc: sdc1 [ 61.858915] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.858916] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.858918] sd 8:0:0:0: [sdc] Attached SCSI disk [ 69.875809] usb 4-3: USB disconnect, device number 4 [ 70.275816] usb 4-3: new SuperSpeed USB device number 5 using xhci_hcd [ 70.293063] scsi9 : usb-storage 4-3:1.0 [ 71.292257] scsi 9:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6 [ 71.292505] scsi 9:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6 [ 71.293527] sd 9:0:0:0: Attached scsi generic sg2 type 0 [ 71.293668] ses 9:0:0:1: Attached Enclosure device [ 71.293758] ses 9:0:0:1: Attached scsi generic sg3 type 13 [ 73.323804] usb 4-3: USB disconnect, device number 5 [ 101.868078] ses 9:0:0:1: Device offlined - not ready after error recovery [ 101.868124] ses 9:0:0:1: Failed to get diagnostic page 0x50000 [ 101.868131] ses 9:0:0:1: Failed to bind enclosure -19 [ 101.868288] sd 9:0:0:0: [sdc] READ CAPACITY(16) failed [ 101.868292] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868296] sd 9:0:0:0: [sdc] Sense not available. [ 101.868428] sd 9:0:0:0: [sdc] READ CAPACITY failed [ 101.868434] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868439] sd 9:0:0:0: [sdc] Sense not available. [ 101.868468] sd 9:0:0:0: [sdc] Write Protect is off [ 101.868473] sd 9:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 101.868580] sd 9:0:0:0: [sdc] Asking for cache data failed [ 101.868584] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 101.868845] sd 9:0:0:0: [sdc] READ CAPACITY(16) failed [ 101.868849] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868854] sd 9:0:0:0: [sdc] Sense not available. [ 101.868894] sd 9:0:0:0: [sdc] READ CAPACITY failed [ 101.868898] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868903] sd 9:0:0:0: [sdc] Sense not available. [ 101.868961] sd 9:0:0:0: [sdc] Asking for cache data failed [ 101.868966] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 101.868969] sd 9:0:0:0: [sdc] Attached SCSI disk Now, if I plug the same drive to the powered usb 2.0 hub of my monitor, the issue is not reproduced (at least on a 20h long operation). Also the issue of the usb reconnects is less frequent if the hard drive is plugged before I switch on the computer. Does anybody have some advice as to what I could do? Which is the faulty part/s that I should replace? As for me, I really don't know if to point my finger to the PSU or the Motherboard (I have updated to the latest firmware and checked the BIOS settings several times). EDIT: The reconnects are happening both in the Sata connected drives and the USBX connected drives.

  Read the article

• Ubuntu installation on Windows , I can't find my way back.

  - by Poofs

  So recently I have installed Ubuntu as an OS in addition to my Windows because it looked good and I have used it in the past and I liked it. Before I installed Ubuntu, they (the website) have given me a help list that shows that I will have the option of having Windows aside to Ubuntu (dual install), while I work with the Ubuntu OS. They told me that if I either put it in a CD or USB drive, I'll be okay. So there I was, installing Ubuntu, saving the Ubuntu file on my USB drive first, then afterwards clicking it and therefore proceeded to install. The problem is once I installed Ubuntu, it directed me to the 'login' page without giving me an option for dual-installing (you know, the language portion and so on). Now I tried both to suspend and shut off, and it seems like I cannot access my Windows files/account anymore and it really is unfortunate. Now I am FREAKING out, because this is a shared computer that my family uses (it's like a main computer in the house) and everyone's files are on this. It is extremely crucial for me to get these Windows files back because if I don't, my life will end tonight. Please, if someone can help me, I will love you forever. Please just help me, this is urgent. I'm sure a lot of people have experienced this too, but I have found nothing on the website helpful for me as Ubuntu is a very new thing for me. Thanks everyone! :)

  Read the article

• In 10.10, USB 3.0 PCI Express card recognized by lspci but not lsusb or dmesg. How to fix?

  - by Paul

  Asus N PC, runs 10.10 x86_64 The Asus N comes with 4 usb 2.0 ports, each labelled 2.0 on the case. Attempting to add two usb 3.0 ports to be provided by a generic usb 3.0 pci express card installed in the pci expres slot. The new card says usb 3.0 and has the blue ports. The card is installed into the laptop unpowered, then the laptop is powered on and boots normally. Nothing happens when a USB 3.0 flash drive is inserted into the usb 3.0 port. uname -a Linux drpaulbrewer-N90SV 2.6.35.8 #1 SMP Fri Jan 14 15:54:11 EST 2011 x86_64 GNU/Linux lspci -v 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 671MX Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64 Kernel modules: sis-agp 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fa000000-fdefffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Capabilities: [d0] Express Root Port (Slot+), MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [f4] Power Management version 2 Capabilities: [70] Subsystem: Silicon Integrated Systems [SiS] PCI-to-PCI bridge Kernel driver in use: pcieport 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media IO] (rev 01) Flags: bus master, medium devsel, latency 0 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) (prog-if 80 [Master]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 128 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at ffe0 [size=16] Capabilities: [58] Power Management version 2 Kernel driver in use: pata_sis 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64, IRQ 20 Memory at f9fff000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64, IRQ 21 Memory at f9ffe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64, IRQ 22 Memory at f9ffd000 (32-bit, non-prefetchable) [size=4K] Capabilities: [50] Power Management version 2 Kernel driver in use: ehci_hcd 00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter (rev 02) Subsystem: ASUSTeK Computer Inc. Device 11f5 Flags: bus master, medium devsel, latency 0, IRQ 19 Memory at f9ffcc00 (32-bit, non-prefetchable) [size=128] I/O ports at cc00 [size=128] Capabilities: [40] Power Management version 2 Kernel driver in use: sis190 Kernel modules: sis190 00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA Controller / IDE mode (rev 03) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64, IRQ 17 I/O ports at c800 [size=8] I/O ports at c400 [size=4] I/O ports at c000 [size=8] I/O ports at bc00 [size=4] I/O ports at b800 [size=16] I/O ports at b400 [size=128] Capabilities: [58] Power Management version 2 Kernel driver in use: sata_sis Kernel modules: sata_sis 00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: fdf00000-fdffffff Capabilities: [b0] Subsystem: Silicon Integrated Systems [SiS] Device 0004 Capabilities: [c0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Root Port (Slot+), MSI 00 Capabilities: [f4] Power Management version 2 Kernel driver in use: pcieport 00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=06, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fe000000-febfffff Prefetchable memory behind bridge: 00000000f6000000-00000000f8ffffff Capabilities: [b0] Subsystem: Silicon Integrated Systems [SiS] Device 0004 Capabilities: [c0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Root Port (Slot+), MSI 00 Capabilities: [f4] Power Management version 2 Kernel driver in use: pcieport 00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio Controller Subsystem: ASUSTeK Computer Inc. Device 17b3 Flags: bus master, medium devsel, latency 0, IRQ 18 Memory at f9ff4000 (32-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 01:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce GT 130M] (rev a1) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 2021 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fc000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fa000000 (64-bit, non-prefetchable) [size=32M] I/O ports at dc00 [size=128] [virtual] Expansion ROM at fde80000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Kernel driver in use: nvidia Kernel modules: nvidia-current, nouveau, nvidiafb 02:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: Device 1a3b:1067 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fdff0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [60] Express Legacy Endpoint, MSI 00 Capabilities: [90] MSI-X: Enable- Count=1 Masked- Kernel driver in use: ath9k Kernel modules: ath9k 03:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30) Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at febfe000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable- Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 lsusb Bus 003 Device 002: ID 0b05:1751 ASUSTek Computer, Inc. BT-253 Bluetooth Adapter Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader Bus 001 Device 002: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam / CNF7129 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub dmesg trying to post dmesg exceeded the stackexchange posting limit of 30K... but nothing there is usb 3.0

  Read the article

• Creating a bootable flash without overlayfs

  - by Septagram

  I want to create an USB stick to carry my Ubuntu everywhere around with me. It's not intended to spread Ubuntu by installing it everywhere, but rather for running my configured system on any computer I come across. So far, I went with installing Ubuntu with unetbootin, however, I have some issues with this. When installed with netbootin, the original disk image is kept intact on the flash drive, forever. Also, a file is created for persistent storage and during boot it is accessed together with the image by overlayfs. This, in my opinion, has the following problems: If system is updated regularly, then files from the image are overwritten in persistent storage, doubling their size and wasting precious space. Persistent storage has a fixed size that you have to define from the start, again, wasting precious space. I'm not 100% sure, but maybe using overlayfs makes disk access slower, and more so on the relatively slow devices. So I'd like to find another solution: either to get rid of the original image or to install Ubuntu "normally" on the separate ext2 partition, or maybe even install it in the main vfat partition on the USB stick. Suggestions?

  Read the article

• Getting file system free space

  - by Fred Riley

  This isn't a problem as such, more a request for information based on ignorance of the Linux filesystem. The very short question is: How do I find out how much free and used space there is on the volume from which Ubuntu is running? More detail: I'm running Ubuntu 12.04 from a 64Gb USB3 stick, created from booting up a year-old Ubuntu 12.04 DVD and running Startup Disk Creator. The reason for this is that the Master Boot Record on my hard disk, holding Windoze 7, has gone belly-up, and whilst awaiting a recovery disk I'm running Ubunto off USB or DVD as a 'trial'. (And will continue to run Ubuntu after restoring Windoze, as I've rediscovered my love of the penguin :o)) After installing Ubuntu on the stick I ran the software update app, which downloaded some 450Mb of updates and took a couple of hours to install to the stick. A couple of times I got a message saying that disk space was short. So I looked in the file manager (or whatever it's called these days) and couldn't see the stick listed, just: SYSTEM hard disk (listed as 479Gb Filesystem) two other partitions that had been created by Windoze "4.3GB Filesystem" which when I try to open gives the error "Could not find /cow", and when I try to unmount it tells me I can't because it's not mounted - D'OH!! Edit: screenshot of file manager Edit: screenshot of low disk space warning What I can't see is the USB stick from which I'm running Ubuntu. Where's it gone, anybody know? This is tangentially related to a previous question of mine about system tools, in that I'm trying to get control and knowledge of the system in the newest incarnation of Ubuntu.

  Read the article

• usb_modeswitch not switching

  - by deniz

  After I upgraded from kernel 2.6.18 to 3.5.3 modeswitch started not to work for me. Although lsusb shows my usb modem, usb_modeswitch does not switch it. My system information is like below. I ran lsusb, dmesg, usb-devices and usb_modeswitch their output is like below. usb_modeswitch instead of switching my modem it says "No devices in default mode found. Nothing to do. Bye.". Can you offer a solution? Kernel: Linux 3.5.3 usb_modeswitch: 1.2.3-1 usb_modeswitch-data: 20120120-1 usbutils: 006-1 libusb: 1.0.8-0.1 root@localhost$ lsusb Bus 002 Device 029: ID 12d1:1446 Huawei Technologies Co., Ltd. root@localhost$ dmesg [70112.477080] usb 2-1.4: new high-speed USB device number 30 using ehci_hcd [70112.567757] scsi49 : usb-storage 2-1.4:1.0 [70112.567842] scsi50 : usb-storage 2-1.4:1.1 [70113.571433] scsi 49:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [70113.572304] scsi 50:0:0:0: Direct-Access HUAWEI TF CARD Storage PQ: 0 ANSI: 2 [70113.574169] sr0: scsi-1 drive [70113.574223] sr 49:0:0:0: Attached scsi CD-ROM sr0 [70113.574250] sr 49:0:0:0: Attached scsi generic sg1 type 5 [70113.574350] sd 50:0:0:0: Attached scsi generic sg2 type 0 [70113.577173] sd 50:0:0:0: [sdb] Attached SCSI removable disk root@localhost$ usb-devices T: Bus=02 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 30 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=1446 Rev=00.00 S: Manufacturer=Huawei Technologies S: Product=HUAWEI Mobile C: #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage I: If#= 1 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage root@localhost$ cat /etc/usb_modeswitch.d/12d1\:1446 # Huawei, newer modems TargetVendor= 0x12d1 TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506" MessageContent="55534243123456780000000000000011062000000100000000000000000000" root@localhost$ usb_modeswitch -c /etc/usb_modeswitch.d/12d1:1446 -v 12d1 -p 1446 -W * usb_modeswitch: handle USB devices with multiple modes * Version 1.2.3 (C) Josua Dietze 2012 * Based on libusb0 (0.1.12 and above) ! PLEASE REPORT NEW CONFIGURATIONS ! DefaultVendor= 0x12d1 DefaultProduct= 0x1446 TargetVendor= 0x12d1 TargetProduct= not set TargetClass= not set TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506" DetachStorageOnly=0 HuaweiMode=0 SierraMode=0 SonyMode=0 QisdaMode=0 GCTMode=0 KobilMode=0 SequansMode=0 MobileActionMode=0 CiscoMode=0 MessageEndpoint= not set MessageContent="55534243123456780000000000000011062000000100000000000000000000" NeedResponse=0 ResponseEndpoint= not set InquireDevice enabled (default) Success check disabled System integration mode disabled usb_set_debug: Setting debugging level to 15 (on) usb_os_find_busses: Skipping non bus directory devices usb_os_find_busses: Skipping non bus directory drivers usb_os_find_busses: Skipping non bus directory uevent usb_os_find_busses: Skipping non bus directory drivers_probe usb_os_find_busses: Skipping non bus directory drivers_autoprobe Looking for target devices ... No devices in target mode or class found Looking for default devices ... No devices in default mode found. Nothing to do. Bye. Thanks in advance.

  Read the article

• Why doesn’t windows explorer show my removable / USB drive even though the command prompt does?

  - by Gishu

  I'm running WinXP SP2. Around 50% of the time, when I slot in my USB drive. Windows explorer refuses to show the drive. If I click on the Safely remove hardware icon on the tray, I can see a menu item for the drive - say drive G: (the light on the USB drive is also on) If I type in G: into the address bar of explorer, it says 'Cannot find...' If I type in G: into a command prompt window, it works and I can do a dir to see the list of directories on the drive. To fix this, I've to remove-reinsert the pen-drive. But doing it every day is annoying. Also this happens only on this machine.. I use this drive on my home machine and it works flawlessly each time. Can anyone suggest things that I could try ? Thanks for reading...

  Read the article

• How to fix corrupted filesystem (shows as RAW) in USB device?

  - by Erico Yan

  I would like to ask if you know how to fix a corrupted USB? I've tried the diskpart command but it didn't work. The media is write protected. Do you have any idea that is much better? I need to fix it because I have important files in my flash drive. I really need to retrieve it. I saw that the file system is seen as RAW and is unaccessible. I tried error checking, but it requires you to format it. I tried data recovery software but all files come out corrupted. My USB is Imation 4GB. Any suggestions?

  Read the article

• Gigabyte GA-970A-UD3 mobo won't boot from USB flash drive

  - by user38586

  I am trying to boot BAMT a Debian flavor via USB on a brand new Gigabyte GA-970A-UD3 motherboard. I tried various flash drive and various OS. I never had this problem with ASUS and MSI. The problem is from Gigabyte hardware. I found that my BIOS is very strict about MBR compatibility. Now I can boot in DOS mode. The flash drive need to be formated as a Win98 Startup disk using HP USB disk storage format tool. Unetbootin menu is booting from USB but won't install BAMT. If I use Windows or Linux diskimager the working MBR is deleted. I tried converting BAMT .img to .iso and it is not booting with Unetbootin. Is it possible to boot BAMT(Debian Linux) from a Win98 DOS command prompt? Maybe there is a way to burn the image and keep the working MBR? If the working MBR is deleted, the flash drive is not recognized at all by the BIOS. This is the info I found that got me booting for the first time in DOS: GB's BIOS will only boot USBs formatted to FAT-32, conforming to normal MBR bootloader. I've seen this before, and surmised that the 'stick-maker' was formatting in ReiserFile, or one of the EXT 'flavors', but no one ever followed up to confirm or deny... Also, if it's putting the bootloader into its own partition - won't work! In the BIOS, on the "Integrated Peripherals" page, the "USB Storage Function" item must be enabled (which should be the default) to allow USB booting... I've put a little work into a 'GB USB booting tutorial', and frankly, I'd just go ahead and finish it up for you, but I really don't want to reboot the several times it will take me to 'firm up' procedural details, and take the BIOS/boot pictures for the post - just noticed VAIL finally went 'public beta', so will be downloading for likely twenty-six hours or so There's likely enough there to test a 'raw DOS boot', just to see if your hardware (especially the USB stick itself) will do it... Some post later: Fixed. Here is a brief summary. Since my ubuntu live usb sticks (2gb kingston and 8gb sandisk sd/usb reader - fat32, created in ubuntu 10.04) would not boot this board even though they would boot my ga-ep45-ud3p, I decided to try bilbat's suggestion with the HP usb boot program. I created the win98 boot disk on the kingston 2gb stick without reformatting. It booted right up. Next, I used windows version of unetbootin to write the ubuntu live cd to the kingston disk. This fired right up and completed the install. Everything seems to be in good order now. Unfortunately I can boot in DOS mode but can't boot BAMT.

  Read the article

• Windows 8 - Ubuntu dual boot

  - by Serkan Özkan

  I bought a new Toshiba s855 notebook with windows 8 preinstalled. Secure boot feature was enabled by default. I installed latest version of ubuntu after disabling secure boot feature(it was not possible to install ubuntu without disabling secure boot). But now when I enable secure boot, the system automatically boots into windows 8, and it boots into ubuntu when I disable secure boot. EasyBCD lists the following boot entries but I can only see Windows 8 in boot menu: Default: Windows 8 Timeout: 7 seconds EasyBCD Boot Device: C:\ Entry #1 Name: Ubuntu BCD ID: {971641cd-304a-11e2-be82-806e6f6e6963} Device: \Device\HarddiskVolume2 Bootloader Path: \EFI\ubuntu\grubx64.efi ... Entry #5 Name: Windows 8 BCD ID: {current} Drive: C:\ Bootloader Path: \windows\system32\winload.efi Any recommendations will be appreciated.

  Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >