Search Results

Search found 1411 results on 57 pages for 'wi fi'.

Page 36/57 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

  • Is an Adnroid-based Phone a Suitable MP3 Player for Music Streamed over the Internet?

    - by James McFarland
    I am considering getting an HTC phone running Android from Verizon Wireless when I next upgrade my phone. I also have an online account with a music vendor, where I have rights to listen to my collection, but not download the MP3s. Further, I have an unlimited data plan and Wi-Fi, so I have full access to bandwidth volume without any concerns. I am especially interested in mounting my phone in a car kit, and streaming my online music to my car's sound system while driving. If you are experienced in this scenario, or have tried this scenario - Is is reasonable to expect my HTC Android phone to provide me with streaming music via my cell data plan anywhere I get cell service?

    Read the article

  • Why are my USB 2.0 devices crashing Windows XP?

    - by BenAlabaster
    Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a generic ATX motherboard with no identifying markings other than one stamp that says "Rev.B". CPU-Z identifies the motherboard model as VT8601 but doesn't provide me with any manufacturer name. On board it has 1 x 10/100 LAN, 2 x USB 1.0, VGA, PS/2 for KB and mouse, parallel port, 2 x serial ports, 2 x IDE, 1 x floppy, 2 x SDRAM slots, 1 x CPU housing that is seating a 1.3GHz Intel Celeron CPU, 3 x PCI, 1 x AGP - although you can only use 2 of the PCI slots if you use the AGP slot due to the physical layout of the board. It's got 768Mb PC133 SDRAM - 1 x 512Mb & 1 x 256Mb installed as well as a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board containing 3 x external + 1 x internal USB connectors. It has a DVD+/-RW running as master on IDE1 and a 1.44Mb 3.5" floppy drive connected to the floppy connector. It has an 80Gb Western Digital hard drive running as master on IDE0. All this is sitting in a slimline case. I don't know the wattage of the PSU, but can post this later if this proves to be helpful. The motherboard is running a version of Award BIOS for which I don't have the version number to hand but can again post this later if it would be helpful. The hard disk is freshly formatted and built with Windows XP Professional/Service Pack 3 and is up to date with all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 hangs the whole machine as soon as it starts up, requiring a hard boot to recover). It's got a Daytek MV150 15" touch screen hooked up to the on board VGA and COM1 sockets with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem: If I hook any devices to the USB 2.0 sockets, it hangs the whole machine and I have to hard boot it to get it back up. If I have any devices attached to the USB 2.0 sockets when I boot up, it hangs before Windows gets to the login prompt and I have to hard boot it to recover. Workarounds found: I can plug the same devices into the on board USB 1.0 sockets and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions: I've seen suggestions that this could be a power problem - that the PSU just doesn't have the wattage to drive these ports. While I'm doubtful this is the problem [after all the motherboard has the same standard connector regardless of the PSU wattage], I tried disabling all the on board devices that I'm not using - on board LAN, the second COM port, the AGP connector etc. through the BIOS in what I'm sure is a futile attempt to reduce the power consumption... I also modified the ACPI and power management settings. It didn't have any noticeable affect, although it didn't do any harm either. Could the wattage of the PSU really cause this problem? If it can, is there anything I need to be aware of when replacing it or do I just need to make sure it's got a higher wattage than the current one? My interpretation was that the wattage only affected the number of drives you could hook up to the power connectors, is that right? I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself, and Windows says the card is installed and working correctly... right up until I connect a device to it. The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference - does anyone have any experience that would suggest this might work? Other thoughts/questions: Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question: Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine?

    Read the article

  • Why are my USB 2.0 devices hanging Windows XP?

    - by BenAlabaster
    Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a generic ATX motherboard with no identifying markings other than one stamp that says "Rev.B". CPU-Z identifies the motherboard model as VT8601 but doesn't provide me with any manufacturer name. On board it has 1 x 10/100 LAN, 2 x USB 1.0, VGA, PS/2 for KB and mouse, parallel port, 2 x serial ports, 2 x IDE, 1 x floppy, 2 x SDRAM slots, 1 x CPU housing that is seating a 1.3GHz Intel Celeron CPU, 3 x PCI, 1 x AGP - although you can only use 2 of the PCI slots if you use the AGP slot due to the physical layout of the board. It's got 768Mb PC133 SDRAM - 1 x 512Mb & 1 x 256Mb installed as well as a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board containing 3 x external + 1 x internal USB connectors - it has a NEC uPD720102 chipset. It has a DVD+/-RW running as master on IDE1 and a 1.44Mb 3.5" floppy drive connected to the floppy connector. It has an 80Gb Western Digital hard drive running as master on IDE0. All this is sitting in a slimline case. I don't know the wattage of the PSU, but can post this later if this proves to be helpful. The motherboard is running a version of Award BIOS for which I don't have the version number to hand but can again post this later if it would be helpful. The hard disk is freshly formatted and built with Windows XP Professional/Service Pack 3 and is up to date with all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 hangs the whole machine as soon as it starts up, requiring a hard boot to recover). It's got a Daytek MV150 15" touch screen hooked up to the on board VGA and COM1 sockets with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem: If I hook any devices to the USB 2.0 sockets, it hangs the whole machine and I have to hard boot it to get it back up. If I have any devices attached to the USB 2.0 sockets when I boot up, it hangs before Windows gets to the login prompt and I have to hard boot it to recover. Workarounds found: I can plug the same devices into the on board USB 1.0 sockets and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions: I've seen suggestions that this could be a power problem - that the PSU just doesn't have the wattage to drive these ports. While I'm doubtful this is the problem [after all the motherboard has the same standard connector regardless of the PSU wattage], I tried disabling all the on board devices that I'm not using - on board LAN, the second COM port, the AGP connector etc. through the BIOS in what I'm sure is a futile attempt to reduce the power consumption... I also modified the ACPI and power management settings. It didn't have any noticeable affect, although it didn't do any harm either. Could the wattage of the PSU really cause this problem? If it can, is there anything I need to be aware of when replacing it or do I just need to make sure it's got a higher wattage than the current one? My interpretation was that the wattage only affected the number of drives you could hook up to the power connectors, is that right? I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself, and Windows says the card is installed and working correctly... right up until I connect a device to it. The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference - does anyone have any experience that would suggest this might work? Other thoughts/questions: Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question: Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine? Edit: Updated the USB 2.0 info with reference to actual card - http://www.xpcgear.com/lpnec4u.html

    Read the article

  • Able to ping but does not get the data

    - by Dany
    I am facing a problem in my client server program; when using wireless I can ping but not receive any data. There is a source which receives a streaming request from client via server. This works fine when all the machines are connected through LAN cable but when I put all the computers in wi-fi network, all the machine are able to ping each other but when the client send the stream request to the server the ping request between server and client says destination unreachable. It works all well until the client does not send the streaming request. What might be the issue?

    Read the article

  • why doesn't my computer resume after sleeping overnight?

    - by bamdad
    i'm having a weird, weird bug that's been haunting me since 11.10. if i listen to music or watch a video and my computer automatically goes to sleep at night, it won't properly resume in the morning. otherwise, suspend and resume works just fine. what happens is that the wi-fi and bluetooth indicator (that turns from white to orange when suspending) stays orange, the display doesn't turn on, and the only option i have is to hard reset the machine. here's what i've tried so far: installing (and uninstalling and reinstalling) laptop-mode-tools switching the proprietary wireless driver (broadcom-wl) to the open source one (brcmsmac & bcma) and back unloading (and blacklisting) all bluetooth modules (rfcomm, btusb, bnep, bluetooth) and stopping (# stop bluetooth) and disabling (# echo 'manual' /etc/init/bluetooth.override) the bluetooth service creating a custom pm sleep action as suggested here: http://ubuntuforums.org/showthread.php?p=11926504 not watching youtube / any stuff that uses flash before going to sleep (i have flashblock, and i checked $ ps aux | grep flash) because i suspected flash to be the culprit trying out different versions of fglrx (the one from the repos, then installing the latest one from amd's site via generated .deb files, then back to the official ones) none of these worked. i remember back in the days of 10.04, there was a gconf key called network sleep: i thought about disabling that, since re-enabling the wireless card seems to be the problem (according to the indicator led), but the option appears to be missing from gnome 3 (unity-2d, whatever). does anyone have any ideas? thanks, bamdad

    Read the article

  • What "file system" is supported by Windows and Linux?

    - by Skiroid
    I'm setting up a media centre for my living room so that I'm able to watch downloaded films and TV shows on the big screen. The media centre is an old small computer which will have XBMCbuntu 12 installed on it. Right now, the media centre has a 300 GB HDD partitioned into two: 1) Ext4 50 GB (where I'll install the OS) 2) swap 6 GB (swap area) I'm wanting a third partition which I can store all my media on to. This partition will fill the rest of my HDD. Although, I'm stuck on which file system I should set it to. I need the file system to be fully compatible with Windows as I'm going to be removing the HDD from the media centre and plugging it into my main PC, running Windows 8, to transfer the media onto it. I can't transfer over Wi-Fi as the media centre won't be connected to the Internet. My options are: Ext4 journaling, Ext3 journaling, Ext2 journaling, ReiserFS journaling, btrfs journaling, JFS journaling, XFS journaling, FAT16 and FAT32. I know that FAT32 is compatible with Windows but it can only hold files that are 4 GB or less and my films are well over 4 GB. Some more than 10 GB. Is there a file system I can use which is supported by Linux and pops up under Computer in Windows?

    Read the article

  • Restore Default Appearance in Ubuntu 12.04

    - by katya sehgal
    I'd like the original colour scheme, icon style of 12.04. I somehow lost the Ambiance theme (possible error or upgrade error). I re-installed 'light-themes' from the terminal and got it back. But the panel on the top that shows the options of sound, battery and wi-fi has changed and I can-not get the original setting back. In the windows, the close, minimize tools have shifted to the right instead of the original left side. I had installed MyUnity and Ubuntu Tweak but deleted them. As such, I want the original setting back. Kindly help me with the commands. I have searched for solutions; there are multiple and I need to be sure if I should follow the same. Kindly bear before marking duplicate. Discoveries *. [The appearance is gray and boxy as outlined here.] Not sure same problem. *. [Similar 'gray and boxy' article here] *. Desktop forgets theme.] *. I have also tried unity --reset command. It never completes. I gave it 20 minutes.

    Read the article

  • Wireless keeps disabling or stays disconnected (Realtek RTL8191SEvB)

    - by jindrichm
    I have Realtek RTL8191SEvB wireless card on Ubuntu 10.10: $ lspci -v | grep Network 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10) When I load its driver, according to the Network Manager it sometimes blinks with a list of available networks but it keeps disabling itself or it stays disconnected. So, I can't connect to any wi-fi network (which results in frustration). The driver is loaded: $ lsmod Module Size Used by r8192se_pci 509932 0 Looks normal: $ sudo lshw -C network *-network description: Wireless interface product: RTL8191SEvB Wireless LAN Controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 10 serial: 1c:65:9d:60:c7:7a width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rtl819xSE driverversion=0019.1207.2010 firmware=63 latency=0 link=no multicast=yes wireless=802.11bgn resources: irq:17 ioport:2000(size=256) memory:f0500000-f0503fff Configured: $ sudo iwconfig wlan0 wlan0 802.11bgn Nickname:"rtl8191SEVA2" Mode:Managed Frequency=2.412 GHz Access Point: Not-Associated Bit Rate:130 Mb/s Retry:on RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=10/100 Signal level=0 dBm Noise level=-100 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Is not blocked: $ rfkill list all 0: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: yes However something's happening with it: $ dmesg [ 6485.948668] InitializeAdapter8190(): ==++==> Turn off RF for RfOffReason(1073741824) ---------- [ 6486.062666] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1 [ 6486.062671] InitializeAdapter8192SE(): Set MRC settings on as default!! [ 6486.062675] HW_VAR_MRC: Turn on 1T1R MRC! [ 6486.064091] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6486.248761] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1 [ 6486.248771] InitializeAdapter8192SE(): Set MRC settings on as default!! [ 6486.248776] HW_VAR_MRC: Turn on 1T1R MRC! [ 6486.580083] GPIOChangeRF - HW Radio OFF [ 6486.610085] ============>sync_scan_hurryup out [ 6486.623814] ================>r8192_wx_set_scan(): hwradio off [ 6486.830484] =========>r8192_wx_set_essid():hw radio off,or Rf state is eRfOff, return So, does anyone know where the problem might be?

    Read the article

  • HP laptop won't recognize wireless adapter

    - by Dennis Williamson
    I have an HP Pavilion dv6400 series laptop with an NVidea chipset which is the subject of a class action lawsuit. The symptom (PDF) that I'm experiencing is that the system fails to recognize that there is a wireless adapter installed. It doesn't appear in Device Manager. Is there some way, short of installing a new adapter, that I can work around this problem? The system is running Windows Vista Home and has the latest BIOS (F42) and Windows updates and drivers. See this related question where I ask how to use an old Windows Mobile phone as a Wi-Fi (not cellular data) tether.

    Read the article

  • HP G42 Ubuntu live cd failure

    - by Jon
    Ok, I have tried every option under the sun. I have surfed through the internet for a good 3 hours straight and to no effect. I installed ubuntu on my HP G42 laptop, it worked fine, then when I tried installing the standard after installation updates my wifi failed. In my attempt to fix my wi-fi I rebooted my laptop, when I rebooted I was stuck on a black screen with nothing that I tried to fix it helping the situation. So I then tried to fix it by reinstalling Ubuntu. When I attempted to boot into the live ccd it failed leaving with the now familar black screen. After numerous attempts using instructions from live cd and instal failure blank screen... page and replacing my hard drive at a cost of $65 I am coming here for help. As for the actual DVD that I tried installing ubuntu from it was able to install ubuntu on a mac just fine after my issues on the HP. After installing the hard drive I loaded up windows just fine but I don't want windows I want ubuntu, can you please provide instructions on how to install ubuntu?

    Read the article

  • Verizon Fivespot firewall

    - by Patrick
    I have a Verizon Fivespot Wi-Fi router and am having issues connecting to the computer that uses it to get on the internet. I am able to connect to the Fivespot admin pages remotely and I am able to connect to the internet from the computer behind the Fivespot. There are two sections pertinent to this issue, Port Filtering And, Port Forwarding I've tried each individually and both together but cannot access anything through the router except for the admin page. I am trying to connect through SSH to an Ubuntu 10.04 box over wifi. I have called Verizon Tech Support but they were unhelpful, the person essentially read what it says on each screen without any elaboration. Any help is greatly appreciated!

    Read the article

  • How to turn ON bluetooth in Dell Inspiron?

    - by ykombinator
    I bought a new Dell Inspiron laptop a month ago. The company had pre-installed all the required software in my laptop. As such, the bluetooth used to be switched ON whenever I switched on my machine. However, a few days later, the bluetooth stopped working. I re-started the Laptop and it was ON! Now I am facing this problem very frequently. As such, the wi-fi connection doesn't work unless the bluetooth is switched ON. The bluetooth turns ON after a few re-boots and sometimes doesn't turn ON for many days. Does anybody know any trick to keep the bluetooth ON everytime I switch ON my machine. P.S: The Dell manual did not help.

    Read the article

  • Visits-PageViews-Bounce Rate-New Visitors-Visit Duration (Google Analytics), which one is top priority for seo?

    - by HOY
    This is the case: My site is getting a lot of trafic from an image (a company logo image) because this image is ranked 1.st in google search results for a company's title. (I have no idea how that happened) This image is must for my website, but it is not relevant with site content so irrelevant people search for the image and finds out about my site, so that I get interesting statistics: http://postimage.org/image/3oyvrjoz9/ Pros: Total Visits & Avg. New Visits Cons: Avg. Page/Visit, Avg. Visit Duration, Bounce Rate In summary I am confused if this image is helpful to my website ? Because I don't know the balance between those 5 statistics P.S: My website is 2 months old, and we are working on seo at the moment Another P.S: Kindly ask you to not provide assumtions, because I also have assumptions, I need real knowledge. Edit: Search Keyword is: arcelik logo Search Site: google.com.tr Search URL: https://www.google.com.tr/search?hl=en&q=arcelik+logo&bav=on.2,or.r_gc.r_pw.r_qf.&bvm=bv.41524429,d.Yms&biw=1366&bih=667&um=1&ie=UTF-8&tbm=isch&source=og&sa=N&tab=wi&ei=oZIDUfutAseVswa9zYHwCw

    Read the article

  • Mac OSX DHCP Stopped Working [on hold]

    - by Jesse James Richard
    Tethering a Raspberry PI to a MacBook (Mavericks) via ethernet is proving to be a real pain. This worked for about a day. My MacBook required a rare reboot and once it came back up the Pi won't get an address. I've confirmed it's not a problem with the Pi. It's a problem with the MacBook for sure. It's basically just stopped giving out IPs. I've read as much as I've found about how to fix this friggin' problem, but I've thus far come up blank. Internet sharing Wi-fi Ethernet enabled, and/or Edited /etc/bootpd.plist as described here (http://www.jacquesf.com/2011/04/mac-os-x-dhcp-server/ - this worked initially and now no longer does) Pi connected directly to the router has no problems. My MacBook DHCP server will no longer give out addresses. Any help would be much appreciated.

    Read the article

  • Accessing localhost (xampp) from another computer over LAN network - how to?

    - by vr3690
    I have just set up a wi-fi network at home. I have all my files on my desktop computer (192.168.1.56) and want to access localhost over there from another computer (192.168.1.2). On my desktop I can access localhost through the normal http://localhost. Apache is running on port 80 as usual. Exactly what do I have to do to achieve this? There is documentation on the net but they either don't work or are too fragment and confusing to understand. I think I have to make changes to my apache's httpd.conf file and the hosts file. Any ideas as to what changes to make?

    Read the article

  • Playing games over RDP and utilizing other res of powerfull PC... [closed]

    - by Alex
    Possible Duplicate: Is it possible to run games over remote desktop? Hey guys, I have the one question..that may be not usual but very interesting.. Well, I have laptop and some powerfull PC, now I want to utilize ALL energy of the powerfull PC on my notebook.. for example, run games like F.E.A.R on powefull PC and next play it over the Remote Desktop on my laptop.. both PC may be connected lan < lan, or thru Wi-Fi, or FireWare, or (?) any other way that does not matter.. Google told me that it won't work over RDP due to protocol lacks and there should be many bump on the road on that way.. but, maybe , you guys will give me the right point ? Let's formalzie.. we'd like to utilize all resources of one PC on another PC via network, how we should do that ? Any ideas?

    Read the article

  • Internet connection issues after installing Windows Phone 8 SDK

    - by Mosquito
    first of all I must admit, that I'm not good in all this network stuff. I am using Windows 8 OS. On my laptop (Lenovo G570) I have installed Windows Phone 8 SDK and shortly after this I started having weird issues with internet connection. When I start my laptop, internet usually works fine, but after a few minutes it starts slowing down so much, that I'm not able to open a single page. Rebooting doesn't work, after several disabling and enabling network adapter, it usually works again for a few minutes and then again it stops. I'm sure it has something to do with Windows Phone 8 SDK, because problems started with this. With SDK there was also installed "vEthernet (Internal Ethernet Port Windows Phone Emulator Internal Switch)" network adapter. It is worth to note that problems occur mostly in my school network, not at home. Both at home and school I am using Wi-Fi connection. I hope the information given are enough to help me. Thanks in advance for any answers!

    Read the article

  • Windows xp media center, iTunes, Home sharing problem with app Remote and Apple tv2

    - by Amador
    Hello everybody, greetings from Mexico, sorry about my english but here it goes: I recently bought and apple tv 2nd generation it works just fine, i can see you tube videos but i cant see my library. My pc is conected to the same wi-fi than my apple tv. I have the latest software. I have my firewall off. I turned off and on my router. Search for iphone, ipad remotes on, sharing my library on my local network on, in itunes. Ive checked that my id was the same. On top of that the Remote app doesnt seem to work either. Please help, im kinda loosing my mind over this

    Read the article

  • Networking conflict - What is the most common default computer name for Windows?

    - by John
    I recently had to change the name of my computer to log onto a public wi-fi spot, because a computer with my name was already logged on. (I asked a guy there what to do after it said there was already a computer named "(omitted)" logged on.) I've never been at a wifi spot you had to log into before. I didn't even notice what the computer's name was before. My question is what are the most common default computer names. I'm curious. How often does this sort of problem happen? (For some reason my previous post was closed as off topic - so now I included the reason I'm asking. If it's still considered off topic (networking conflicts) I'll take it elsewhere, but the other forums I know of (ehow.com, answers.yahoo.com) are full of people that couldn't begin to answer a question like this.) Thanks.

    Read the article

  • Networking conflict - What is the most common default computer name for Windows?

    - by John
    I recently had to change the name of my computer to log onto a public wi-fi spot, because a computer with my name was already logged on. (I asked a guy there what to do after it said there was already a computer named "(omitted)" logged on.) I've never been at a wifi spot you had to log into before. I didn't even notice what the computer's name was before. My question is what are the most common default computer names. I'm curious. How often does this sort of problem happen? (For some reason my previous post was closed as off topic - so now I included the reason I'm asking. If it's still considered off topic (networking conflicts) I'll take it elsewhere, but the other forums I know of (ehow.com, answers.yahoo.com) are full of people that couldn't begin to answer a question like this.) Thanks.

    Read the article

  • Problems with connecting to wireless network on windows 7

    - by Naveen
    I have a Dell laptop with Windows 7 (Home premium) 64 bit edition installed on it. I use a Wi-Fi router to browse the net. My problem is, I lose the network connection every 10 minutes or so. The network icon on the system tray shows the refresh icon and the status as "identifying network". The network is fine and works fine with my phone. I saw on the net this may be caused if I have enabled IPv6, so I disabled it but still problem persists. When I look at the event log I see the following entries: "Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0xXXXXXXXX. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server." I have also installed VirtualBox(32 bit edition) on the laptop. Does anybody any solution to this?

    Read the article

  • ASUS WL-500gP v2 network between two local machines

    - by Epsiloncool
    I have two windows XP machines in my home networks, connected with ASUS WL-500gp V2 which also used as internet router. Problem is: while I have both computers normally goes to internet (used DHCP, static routes is ON, routing table is empty, operation mode is Home Gateway). I see both computers listed on the Network Neighborhood on 1st computer (wired to router), can enter to my own computer, but can not enter to other. I see only one computer (2nd) on the Network Neighborhood on 2nd computer (connected thru Wi-Fi), can enter to itself, getting error when trying to enter 1st computer address in address line (like \My1stComp). What is the problem? I totally crazy founding problem about 3 months.

    Read the article

  • Kvpn on ubuntu 11.10 is stuck on 'Connecting'

    - by xupv5
    I recently installed open-vpn and it's gui, Kvpn, on my ubuntu system but after I load the configuration file and click 'Connect' it just runs through and gets stuck on 'Connecting', never actually getting connected. How do i get around this or what might i be doing wrong? The profile was set up using a .conf file and the network i'm trying to connect to needs only a username and password. I'm on a wi-fi connection, with one network card(also behind a university firewall, i suppose). Any help regarding connecting to a vpn on ubuntu would be much appreciated. Thanks!

    Read the article

  • Asus x551c windows 7 Intel HD Graphics driver

    - by user3609459
    I did install Windows 7 64 bit on my ex. Windows 8 pro Asus x551c "Ultrabook". The CD with the drivers isn't useable since its a windows 8 only DVD-Rom. I got the Wi-Fi and other stuff running and already tryed 3 of the Intel-HD Graphic drivers for win7 64Bit i found with google. No one was compatible with my pc. Any suggestions how to get this running? I hate windows 8 and dont want to get forced to use it.

    Read the article

  • Vista Startup - Cannot Find the File Specified

    - by Redmastif
    Yesterday I restarted my laptop because my Wi-Fi catcher wasn't working correctly, and when the computer reached the login screen, instead of showing my user account it said "Cannot find the file specified". I rebooted and ran the Startup Repair and Memory Diagnostics but nothing showed up. I also took the battery out for a minute and tried again but still no luck. The weird thing is that I cannot even boot into safe mode, it still shows the same error. I don't remember downloading or opening anything suspicious recently, and I have 3 different cleaners/anti-malware programs as well that I usually run about once a week. I did go into the registry recently but I didn't modify or delete anything as I was only checking to see if I had a certain key in it. I have a Dell laptop running Vista Home Basic SP2. If I have to I can reinstall the OS with the CD or even take it to Best Buy but I'd rather try and fix it first. Thanks.

    Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >