Search Results

Search found 1099 results on 44 pages for 'writer'.

Page 36/44 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

• Hardware testing tool/suite

  - by Aviator

  Hi All, I just bought a new core i5 system (assembled) and started installing Windows 7. It was failing for many times and at some point got installed. After that, frequent crashes related to MEMORY. So checked the RAM using memtest86+ and found many errors.I got it replaced with the vendor and now if i install ANY OS, at some point in installation it either freezes completely with no response for hours, or restarts automatically. I tried installing Windows 7, Windows Vista and Ubuntu 9.10. I tested the new RAM again and found no problems in about 2 passes using memtest86+. I even updated the BIOS using bootable USB and even the problem persists. I am really not sure which hardware is causing trouble. I dont have any OS inside it, so i have to check using bootable CDs DVDs and USB only. Please advice on how to proceed. Are there any suites/ separate tools for checking integrity of each hardware parts and troubleshoot it? I wanted to confirm which part is problematic before going for replacement. Thanks a lot! This is the config: Core i5, MSI P55-GD65, GSKill 2x2GB, Seagate 500GB 7200rpm, CM Extreme 600W PSU, Saphhire Radeon 5770 1GB, LG DVD Writer

  Read the article

• How do I back up Hyper-V VMs with Windows Server backup on Windows Server 2008 R2?

  - by Chris

  I've searched this site and google, and I CAN find information about how to back up Hyper-V virtual machines by using Windows Server Backup from the Hyper-V host in Windows Server 2008. You have to set up a registry key to enable the Hyper-V VSS writer, and then you can take online backups of your VMs. However, all the information I have found is about a year old, and none of it has been updated for Windows Server 2008 R2. I tried to run the "FixIt" .msi found here: http://support.microsoft.com/kb/958662 ... but it said that it was not applicable to my operating system. So I am thinking either Windows Server 2008 R2 already has its VSS service for Hyper-V enabled, or it still needs to be enabled but the FixIt package doesn't feel comfortable operating on an OS that wasn't RTM at the time. I went ahead and scheduled a windows server backup for 9pm tomorrow. It said it would take 86 GB, which means it MUST be counting those VMs. But will this backup fail? Can anyone confirm whether you have to apply the same registry changes for R2?

  Read the article

• Are these hardwares compatible?

  - by Tom Kaufmann

  I am trying to upgrade my new machine but I want to do it myself. This is my 1st attempt at building system. After carefully reading reviewing feedback and my budget I have decided to select the below listed components. Can anybody let me know are they compatible or not? Transcend 64 GB 2.5" SATA Solid State Drive Asus GeForce GTX550 1GB DDR5 ENGTX550 TI DI/1GD5 Graphics Card Seagate Barracuda 1 TB HDD Internal Hard Drive Cooler Master eXtreme Power Pro 600 Power Supply Intel Core i5 2500K Sandy Bridge 3.30 GHz 95 W 4 Core Desktop Processor Intel DX79TO Motherboard Corsair CMZ8GX3M2A1600C9 8 GB DDR3 SDRAM 1600 MHz Dual Channel Kit Desktop Memory Sony AD-7260S-ZS Internal DVD Writer - Black Cooler Master Hyper TX3 EVO Intel CPU Cooler Cooler Master Elite 335U Cabinet LG E2051T 20.1 Inch SuperSlim Monitor Is any of these hardware components incompatible with I5 2500K? If you have any other suggestions for selecting any other harwdware that can boost up my performance or lower my cost while having the same performance, please suggest. But my primary questions is whether they are compatible or not! Any help is appreciated. Thank you.

  Read the article

• DirectX works for 64-bit but not 32-bit

  - by dtbarne

  I'm trying to play a game (Civilization 5) which was previously working but no longer. I believe I've narrowed it down to a DirectX issue because I get an error running dxdiag.exe in 32 bit mode. My goal (at least I believe) is to get Direct3D Acceleration "Enabled" in dxdiag (as it is in 64 bit dxdiag). A very similar issue is here: http://answers.microsoft.com/en-us/windows/forum/windows_7-gaming/direct3d-acceleration-is-not-available-in-windows/4c345e6e-dc68-e011-8dfc-68b599b31bf5?page=1 The proposed answer, which looks very promising, doesn't seem to work for me. Like other users in that thread, HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Direct3D\Drivers does not have a SoftwareOnly key to change. I even tried manually adding it as a string and dword, to no avail. I have a NVIDIA GeForce GT 525M, and before you ask, yes I've tried updating (also uninstalling, reinstalling) my drivers. I've also tried doing the same with DirectX (and Civilization 5 for that matter). Been debugging for some 4+ hours now after a full day of work and I've run out of ideas. I'm hoping somebody knows the solution here! :) Here's what I see when I open dxdiag: DxDiag has detected that there mgiht have been a problem accessing Direct3D the last time this program was used. Would you like to bypass Direct3D this time? No - Crash Yes - Works, but in Display tab: DirectDraw Acceleration: Disabled Direct3D Acceleration: Not Available AGP Texture Acceleration: Not Available If I click "Run 64-bit DxDiag", all three are "Enabled". I should also note that I've tried the following steps as Microsoft suggests, but I'm not able to do so as the "Change Settings" button is disabled. Some programs run very slowly—or not at all—unless Microsoft DirectDraw or Direct3D hardware acceleration is turned on. To determine this, click the Display tab, and then under DirectX Features, check to see whether DirectDraw, Direct3D, and AGP Texture Acceleration appear as Enabled. If not, try turning on hardware acceleration. Click to open Screen Resolution. Click Advanced settings. Click the Troubleshoot tab, and then click Change settings. If you're prompted for an administrator password or confirmation, type the password or provide confirmation. Move the Hardware Acceleration slider to Full. Full dxdiag dump: ------------------ System Information ------------------ Time of this report: 11/8/2012, 23:13:24 Machine name: DTBARNE Operating System: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120830-0333) Language: English (Regional Setting: English) System Manufacturer: Dell Inc. System Model: Dell System XPS L502X BIOS: Default System BIOS Processor: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (4 CPUs), ~2.5GHz Memory: 8192MB RAM Available OS Memory: 8086MB RAM Page File: 2466MB used, 13704MB available Windows Dir: C:\Windows DirectX Version: DirectX 11 DX Setup Parameters: Not found User DPI Setting: Using System DPI System DPI Setting: 96 DPI (100 percent) DWM DPI Scaling: Disabled DxDiag Version: 6.01.7601.17514 32bit Unicode DxDiag Previously: Crashed in Direct3D (stage 2). Re-running DxDiag with "dontskip" command line parameter or choosing not to bypass information gathering when prompted might result in DxDiag successfully obtaining this information ------------ DxDiag Notes ------------ Display Tab 1: No problems found. Sound Tab 1: No problems found. Sound Tab 2: No problems found. Input Tab: No problems found. -------------------- DirectX Debug Levels -------------------- Direct3D: 0/4 (retail) DirectDraw: 0/4 (retail) DirectInput: 0/5 (retail) DirectMusic: 0/5 (retail) DirectPlay: 0/9 (retail) DirectSound: 0/5 (retail) DirectShow: 0/6 (retail) --------------- Display Devices --------------- Card name: Intel(R) HD Graphics 3000 Manufacturer: Chip type: DAC type: Device Key: Enum\PCI\VEN_8086&DEV_0126&SUBSYS_04B61028&REV_09 Display Memory: Dedicated Memory: n/a Shared Memory: n/a Current Mode: 1920 x 1080 (32 bit) (60Hz) Monitor Name: Generic PnP Monitor Monitor Model: Monitor Id: Native Mode: Output Type: Driver Name: Driver File Version: () Driver Version: DDI Version: Driver Model: WDDM 1.1 Driver Attributes: Final Retail Driver Date/Size: , 0 bytes WHQL Logo'd: n/a WHQL Date Stamp: n/a Device Identifier: Vendor ID: Device ID: SubSys ID: Revision ID: Driver Strong Name: oem11.inf:IntelGfx.NTamd64.6.0:iSNBM0:8.15.10.2696:pci\ven_8086&dev_0126&subsys_04b61028 Rank Of Driver: 00E60001 Video Accel: Deinterlace Caps: n/a D3D9 Overlay: DXVA-HD: DDraw Status: Disabled D3D Status: Not Available AGP Status: Not Available ------------- Sound Devices ------------- Description: Speakers (High Definition Audio Device) Default Sound Playback: Yes Default Voice Playback: Yes Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0665&SUBSYS_102804B6&REV_1000 Manufacturer ID: 1 Product ID: 65535 Type: WDM Driver Name: HdAudio.sys Driver Version: 6.01.7601.17514 (English) Driver Attributes: Final Retail WHQL Logo'd: Yes Date and Size: 11/20/2010 22:23:47, 350208 bytes Other Files: Driver Provider: Microsoft HW Accel Level: Basic Cap Flags: 0xF1F Min/Max Sample Rate: 100, 200000 Static/Strm HW Mix Bufs: 1, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, No Sensaura(tm) ZoomFX(tm): No Description: Digital Audio (S/PDIF) (High Definition Audio Device) Default Sound Playback: No Default Voice Playback: No Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0665&SUBSYS_102804B6&REV_1000 Manufacturer ID: 1 Product ID: 65535 Type: WDM Driver Name: HdAudio.sys Driver Version: 6.01.7601.17514 (English) Driver Attributes: Final Retail WHQL Logo'd: Yes Date and Size: 11/20/2010 22:23:47, 350208 bytes Other Files: Driver Provider: Microsoft HW Accel Level: Basic Cap Flags: 0xF1F Min/Max Sample Rate: 100, 200000 Static/Strm HW Mix Bufs: 1, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, No Sensaura(tm) ZoomFX(tm): No --------------------- Sound Capture Devices --------------------- Description: Microphone (High Definition Audio Device) Default Sound Capture: Yes Default Voice Capture: Yes Driver Name: HdAudio.sys Driver Version: 6.01.7601.17514 (English) Driver Attributes: Final Retail Date and Size: 11/20/2010 22:23:47, 350208 bytes Cap Flags: 0x1 Format Flags: 0xFFFFF ------------------- DirectInput Devices ------------------- Device Name: Mouse Attached: 1 Controller ID: n/a Vendor/Product ID: n/a FF Driver: n/a Device Name: Keyboard Attached: 1 Controller ID: n/a Vendor/Product ID: n/a FF Driver: n/a Poll w/ Interrupt: No ----------- USB Devices ----------- + USB Root Hub | Vendor/Product ID: 0x8086, 0x1C26 | Matching Device ID: usb\root_hub20 | Service: usbhub | +-+ Generic USB Hub | | Vendor/Product ID: 0x8087, 0x0024 | | Location: Port_#0001.Hub_#0002 | | Matching Device ID: usb\class_09 | | Service: usbhub ---------------- Gameport Devices ---------------- ------------ PS/2 Devices ------------ + Standard PS/2 Keyboard | Matching Device ID: *pnp0303 | Service: i8042prt | + Terminal Server Keyboard Driver | Matching Device ID: root\rdp_kbd | Upper Filters: kbdclass | Service: TermDD | + Synaptics PS/2 Port TouchPad | Matching Device ID: *dll04b6 | Upper Filters: SynTP | Service: i8042prt | + Terminal Server Mouse Driver | Matching Device ID: root\rdp_mou | Upper Filters: mouclass | Service: TermDD ------------------------ Disk & DVD/CD-ROM Drives ------------------------ Drive: C: Free Space: 26.2 GB Total Space: 122.0 GB File System: NTFS Model: M4-CT128M4SSD2 ATA Device Drive: D: Model: Optiarc DVDRWBD BC-5540H ATA Device Driver: c:\windows\system32\drivers\cdrom.sys, 6.01.7601.17514 (English), , 0 bytes -------------- System Devices -------------- Name: High Definition Audio Controller Device ID: PCI\VEN_8086&DEV_1C20&SUBSYS_04B61028&REV_05\3&11583659&0&D8 Driver: n/a Name: PCI standard host CPU bridge Device ID: PCI\VEN_8086&DEV_0104&SUBSYS_04B61028&REV_09\3&11583659&0&00 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_8086&DEV_1C1A&SUBSYS_04B61028&REV_B5\3&11583659&0&E5 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_8086&DEV_0101&SUBSYS_20108086&REV_09\3&11583659&0&08 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_8086&DEV_1C18&SUBSYS_04B61028&REV_B5\3&11583659&0&E4 Driver: n/a Name: Intel(R) Centrino(R) Advanced-N 6230 Device ID: PCI\VEN_8086&DEV_0091&SUBSYS_52218086&REV_34\4&2634DE8D&0&00E1 Driver: n/a Name: PCI standard ISA bridge Device ID: PCI\VEN_8086&DEV_1C4B&SUBSYS_04B61028&REV_05\3&11583659&0&F8 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_8086&DEV_1C16&SUBSYS_04B61028&REV_B5\3&11583659&0&E3 Driver: n/a Name: Realtek PCIe GBE Family Controller Device ID: PCI\VEN_10EC&DEV_8168&SUBSYS_04B61028&REV_06\4&109EAB2F&0&00E5 Driver: n/a Name: Intel(R) Management Engine Interface Device ID: PCI\VEN_8086&DEV_1C3A&SUBSYS_04B61028&REV_04\3&11583659&0&B0 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_8086&DEV_1C12&SUBSYS_04B61028&REV_B5\3&11583659&0&E1 Driver: n/a Name: NVIDIA GeForce GT 525M Device ID: PCI\VEN_10DE&DEV_0DF5&SUBSYS_04B61028&REV_A1\4&4DCA75F&0&0008 Driver: n/a Name: Standard Enhanced PCI to USB Host Controller Device ID: PCI\VEN_8086&DEV_1C2D&SUBSYS_04B61028&REV_05\3&11583659&0&D0 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_8086&DEV_1C10&SUBSYS_04B61028&REV_B5\3&11583659&0&E0 Driver: n/a Name: Standard Enhanced PCI to USB Host Controller Device ID: PCI\VEN_8086&DEV_1C26&SUBSYS_04B61028&REV_05\3&11583659&0&E8 Driver: n/a Name: Standard AHCI 1.0 Serial ATA Controller Device ID: PCI\VEN_8086&DEV_1C03&SUBSYS_04B61028&REV_05\3&11583659&0&FA Driver: n/a Name: SM Bus Controller Device ID: PCI\VEN_8086&DEV_1C22&SUBSYS_04B61028&REV_05\3&11583659&0&FB Driver: n/a Name: Intel(R) HD Graphics 3000 Device ID: PCI\VEN_8086&DEV_0126&SUBSYS_04B61028&REV_09\3&11583659&0&10 Driver: n/a Name: Renesas Electronics USB 3.0 Host Controller Device ID: PCI\VEN_1033&DEV_0194&SUBSYS_04B61028&REV_04\4&3494AC3A&0&00E3 Driver: n/a ------------------ DirectShow Filters ------------------ DirectShow Filters: WMAudio Decoder DMO,0x00800800,1,1,WMADMOD.DLL,6.01.7601.17514 WMAPro over S/PDIF DMO,0x00600800,1,1,WMADMOD.DLL,6.01.7601.17514 WMSpeech Decoder DMO,0x00600800,1,1,WMSPDMOD.DLL,6.01.7601.17514 MP3 Decoder DMO,0x00600800,1,1,mp3dmod.dll,6.01.7600.16385 Mpeg4s Decoder DMO,0x00800001,1,1,mp4sdecd.dll,6.01.7600.16385 WMV Screen decoder DMO,0x00600800,1,1,wmvsdecd.dll,6.01.7601.17514 WMVideo Decoder DMO,0x00800001,1,1,wmvdecod.dll,6.01.7601.17514 Mpeg43 Decoder DMO,0x00800001,1,1,mp43decd.dll,6.01.7600.16385 Mpeg4 Decoder DMO,0x00800001,1,1,mpg4decd.dll,6.01.7600.16385 DV Muxer,0x00400000,0,0,qdv.dll,6.06.7601.17514 Color Space Converter,0x00400001,1,1,quartz.dll,6.06.7601.17713 WM ASF Reader,0x00400000,0,0,qasf.dll,12.00.7601.17514 Screen Capture filter,0x00200000,0,1,wmpsrcwp.dll,12.00.7601.17514 AVI Splitter,0x00600000,1,1,quartz.dll,6.06.7601.17713 VGA 16 Color Ditherer,0x00400000,1,1,quartz.dll,6.06.7601.17713 SBE2MediaTypeProfile,0x00200000,0,0,sbe.dll,6.06.7601.17528 Microsoft DTV-DVD Video Decoder,0x005fffff,2,4,msmpeg2vdec.dll,6.01.7140.0000 AC3 Parser Filter,0x00600000,1,1,mpg2splt.ax,6.06.7601.17528 StreamBufferSink,0x00200000,0,0,sbe.dll,6.06.7601.17528 MJPEG Decompressor,0x00600000,1,1,quartz.dll,6.06.7601.17713 MPEG-I Stream Splitter,0x00600000,1,2,quartz.dll,6.06.7601.17713 SAMI (CC) Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713 VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.7601.17514 MPEG-2 Splitter,0x005fffff,1,0,mpg2splt.ax,6.06.7601.17528 Closed Captions Analysis Filter,0x00200000,2,5,cca.dll,6.06.7601.17514 SBE2FileScan,0x00200000,0,0,sbe.dll,6.06.7601.17528 Microsoft MPEG-2 Video Encoder,0x00200000,1,1,msmpeg2enc.dll,6.01.7601.17514 Internal Script Command Renderer,0x00800001,1,0,quartz.dll,6.06.7601.17713 MPEG Audio Decoder,0x03680001,1,1,quartz.dll,6.06.7601.17713 DV Splitter,0x00600000,1,2,qdv.dll,6.06.7601.17514 Video Mixing Renderer 9,0x00200000,1,0,quartz.dll,6.06.7601.17713 Microsoft MPEG-2 Encoder,0x00200000,2,1,msmpeg2enc.dll,6.01.7601.17514 ACM Wrapper,0x00600000,1,1,quartz.dll,6.06.7601.17713 Video Renderer,0x00800001,1,0,quartz.dll,6.06.7601.17713 MPEG-2 Video Stream Analyzer,0x00200000,0,0,sbe.dll,6.06.7601.17528 Line 21 Decoder,0x00600000,1,1,qdvd.dll,6.06.7601.17835 Video Port Manager,0x00600000,2,1,quartz.dll,6.06.7601.17713 Video Renderer,0x00400000,1,0,quartz.dll,6.06.7601.17713 VPS Decoder,0x00200000,0,0,WSTPager.ax,6.06.7601.17514 WM ASF Writer,0x00400000,0,0,qasf.dll,12.00.7601.17514 VBI Surface Allocator,0x00600000,1,1,vbisurf.ax,6.01.7601.17514 File writer,0x00200000,1,0,qcap.dll,6.06.7601.17514 iTV Data Sink,0x00600000,1,0,itvdata.dll,6.06.7601.17514 iTV Data Capture filter,0x00600000,1,1,itvdata.dll,6.06.7601.17514 DVD Navigator,0x00200000,0,3,qdvd.dll,6.06.7601.17835 Overlay Mixer2,0x00200000,1,1,qdvd.dll,6.06.7601.17835 AVI Draw,0x00600064,9,1,quartz.dll,6.06.7601.17713 RDP DShow Redirection Filter,0xffffffff,1,0,DShowRdpFilter.dll, Microsoft MPEG-2 Audio Encoder,0x00200000,1,1,msmpeg2enc.dll,6.01.7601.17514 WST Pager,0x00200000,1,1,WSTPager.ax,6.06.7601.17514 MPEG-2 Demultiplexer,0x00600000,1,1,mpg2splt.ax,6.06.7601.17528 DV Video Decoder,0x00800000,1,1,qdv.dll,6.06.7601.17514 SampleGrabber,0x00200000,1,1,qedit.dll,6.06.7601.17514 Null Renderer,0x00200000,1,0,qedit.dll,6.06.7601.17514 MPEG-2 Sections and Tables,0x005fffff,1,0,Mpeg2Data.ax,6.06.7601.17514 Microsoft AC3 Encoder,0x00200000,1,1,msac3enc.dll,6.01.7601.17514 StreamBufferSource,0x00200000,0,0,sbe.dll,6.06.7601.17528 Smart Tee,0x00200000,1,2,qcap.dll,6.06.7601.17514 Overlay Mixer,0x00200000,0,0,qdvd.dll,6.06.7601.17835 AVI Decompressor,0x00600000,1,1,quartz.dll,6.06.7601.17713 AVI/WAV File Source,0x00400000,0,2,quartz.dll,6.06.7601.17713 Wave Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713 MIDI Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713 Multi-file Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713 File stream renderer,0x00400000,1,1,quartz.dll,6.06.7601.17713 Microsoft DTV-DVD Audio Decoder,0x005fffff,1,1,msmpeg2adec.dll,6.01.7140.0000 StreamBufferSink2,0x00200000,0,0,sbe.dll,6.06.7601.17528 AVI Mux,0x00200000,1,0,qcap.dll,6.06.7601.17514 Line 21 Decoder 2,0x00600002,1,1,quartz.dll,6.06.7601.17713 File Source (Async.),0x00400000,0,1,quartz.dll,6.06.7601.17713 File Source (URL),0x00400000,0,1,quartz.dll,6.06.7601.17713 Infinite Pin Tee Filter,0x00200000,1,1,qcap.dll,6.06.7601.17514 Enhanced Video Renderer,0x00200000,1,0,evr.dll,6.01.7601.17514 BDA MPEG2 Transport Information Filter,0x00200000,2,0,psisrndr.ax,6.06.7601.17669 MPEG Video Decoder,0x40000001,1,1,quartz.dll,6.06.7601.17713 WDM Streaming Tee/Splitter Devices: Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.01.7601.17514 Video Compressors: WMVideo8 Encoder DMO,0x00600800,1,1,wmvxencd.dll,6.01.7600.16385 WMVideo9 Encoder DMO,0x00600800,1,1,wmvencod.dll,6.01.7600.16385 MSScreen 9 encoder DMO,0x00600800,1,1,wmvsencd.dll,6.01.7600.16385 DV Video Encoder,0x00200000,0,0,qdv.dll,6.06.7601.17514 MJPEG Compressor,0x00200000,0,0,quartz.dll,6.06.7601.17713 Cinepak Codec by Radius,0x00200000,1,1,qcap.dll,6.06.7601.17514 Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.7601.17514 Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.7601.17514 Microsoft RLE,0x00200000,1,1,qcap.dll,6.06.7601.17514 Microsoft Video 1,0x00200000,1,1,qcap.dll,6.06.7601.17514 Audio Compressors: WM Speech Encoder DMO,0x00600800,1,1,WMSPDMOE.DLL,6.01.7600.16385 WMAudio Encoder DMO,0x00600800,1,1,WMADMOE.DLL,6.01.7600.16385 IMA ADPCM,0x00200000,1,1,quartz.dll,6.06.7601.17713 PCM,0x00200000,1,1,quartz.dll,6.06.7601.17713 Microsoft ADPCM,0x00200000,1,1,quartz.dll,6.06.7601.17713 GSM 6.10,0x00200000,1,1,quartz.dll,6.06.7601.17713 CCITT A-Law,0x00200000,1,1,quartz.dll,6.06.7601.17713 CCITT u-Law,0x00200000,1,1,quartz.dll,6.06.7601.17713 MPEG Layer-3,0x00200000,1,1,quartz.dll,6.06.7601.17713 Audio Capture Sources: Microphone (High Definition Aud,0x00200000,0,0,qcap.dll,6.06.7601.17514 PBDA CP Filters: PBDA DTFilter,0x00600000,1,1,CPFilters.dll,6.06.7601.17528 PBDA ETFilter,0x00200000,0,0,CPFilters.dll,6.06.7601.17528 PBDA PTFilter,0x00200000,0,0,CPFilters.dll,6.06.7601.17528 Midi Renderers: Default MidiOut Device,0x00800000,1,0,quartz.dll,6.06.7601.17713 Microsoft GS Wavetable Synth,0x00200000,1,0,quartz.dll,6.06.7601.17713 WDM Streaming Capture Devices: HD Audio Microphone 2,0x00200000,1,1,ksproxy.ax,6.01.7601.17514 Integrated Webcam,0x00200000,1,2,ksproxy.ax,6.01.7601.17514 WDM Streaming Rendering Devices: HD Audio Headphone/Speakers,0x00200000,1,1,ksproxy.ax,6.01.7601.17514 HD Audio SPDIF out,0x00200000,1,1,ksproxy.ax,6.01.7601.17514 BDA Network Providers: Microsoft ATSC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514 Microsoft DVBC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514 Microsoft DVBS Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514 Microsoft DVBT Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514 Microsoft Network Provider,0x00200000,0,1,MSNP.ax,6.06.7601.17514 Video Capture Sources: Integrated Webcam,0x00200000,1,2,ksproxy.ax,6.01.7601.17514 Multi-Instance Capable VBI Codecs: VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.7601.17514 BDA Transport Information Renderers: BDA MPEG2 Transport Information Filter,0x00600000,2,0,psisrndr.ax,6.06.7601.17669 MPEG-2 Sections and Tables,0x00600000,1,0,Mpeg2Data.ax,6.06.7601.17514 BDA CP/CA Filters: Decrypt/Tag,0x00600000,1,1,EncDec.dll,6.06.7601.17708 Encrypt/Tag,0x00200000,0,0,EncDec.dll,6.06.7601.17708 PTFilter,0x00200000,0,0,EncDec.dll,6.06.7601.17708 XDS Codec,0x00200000,0,0,EncDec.dll,6.06.7601.17708 WDM Streaming Communication Transforms: Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.01.7601.17514 Audio Renderers: Speakers (High Definition Audio,0x00200000,1,0,quartz.dll,6.06.7601.17713 Default DirectSound Device,0x00800000,1,0,quartz.dll,6.06.7601.17713 Default WaveOut Device,0x00200000,1,0,quartz.dll,6.06.7601.17713 Digital Audio (S/PDIF) (High De,0x00200000,1,0,quartz.dll,6.06.7601.17713 DirectSound: Digital Audio (S/PDIF) (High Definition Audio Device),0x00200000,1,0,quartz.dll,6.06.7601.17713 DirectSound: Speakers (High Definition Audio Device),0x00200000,1,0,quartz.dll,6.06.7601.17713 --------------- EVR Power Information --------------- Current Setting: {651288E5-A7ED-4076-A96B-6CC62D848FE1} (Balanced) Quality Flags: 2576 Enabled: Force throttling Allow half deinterlace Allow scaling Decode Power Usage: 100 Balanced Flags: 1424 Enabled: Force throttling Allow batching Force half deinterlace Force scaling Decode Power Usage: 50 PowerFlags: 1424 Enabled: Force throttling Allow batching Force half deinterlace Force scaling Decode Power Usage: 0

  Read the article

• What are developer's problems with helpful error messages?

  - by Moo-Juice

  It continue to astounds me that, in this day and age, products that have years of use under their belt, built by teams of professionals, still to this day - fail to provide helpful error messages to the user. In some cases, the addition of just a little piece of extra information could save a user hours of trouble. A program that generates an error, generated it for a reason. It has everything at its disposal to inform the user as much as it can, why something failed. And yet it seems that providing information to aid the user is a low-priority. I think this is a huge failing. One example is from SQL Server. When you try and restore a database that is in use, it quite rightly won't let you. SQL Server knows what processes and applications are accessing it. Why can't it include information about the process(es) that are using the database? I know not everyone passes an Applicatio_Name attribute on their connection string, but even a hint about the machine in question could be helpful. Another candidate, also SQL Server (and mySQL) is the lovely string or binary data would be truncated error message and equivalents. A lot of the time, a simple perusal of the SQL statement that was generated and the table shows which column is the culprit. This isn't always the case, and if the database engine picked up on the error, why can't it save us that time and just tells us which damned column it was? On this example, you could argue that there may be a performance hit to checking it and that this would impede the writer. Fine, I'll buy that. How about, once the database engine knows there is an error, it does a quick comparison after-the-fact, between values that were going to be stored, versus the column lengths. Then display that to the user. ASP.NET's horrid Table Adapters are also guilty. Queries can be executed and one can be given an error message saying that a constraint somewhere is being violated. Thanks for that. Time to compare my data model against the database, because the developers are too lazy to provide even a row number, or example data. (For the record, I'd never use this data-access method by choice, it's just a project I have inherited!). Whenever I throw an exception from my C# or C++ code, I provide everything I have at hand to the user. The decision has been made to throw it, so the more information I can give, the better. Why did my function throw an exception? What was passed in, and what was expected? It takes me just a little longer to put something meaningful in the body of an exception message. Hell, it does nothing but help me whilst I develop, because I know my code throws things that are meaningful. One could argue that complicated exception messages should not be displayed to the user. Whilst I disagree with that, it is an argument that can easily be appeased by having a different level of verbosity depending on your build. Even then, the users of ASP.NET and SQL Server are not your typical users, and would prefer something full of verbosity and yummy information because they can track down their problems faster. Why to developers think it is okay, in this day and age, to provide the bare minimum amount of information when an error occurs? It's 2011 guys, come on.

  Read the article

• Add Microsoft Core Fonts to Ubuntu

  - by Matthew Guay

  Have you ever needed the standard Microsoft fonts such as Times New Roman on your Ubuntu computer?  Here’s how you can easily add the core Microsoft fonts to Ubuntu. Times New Roman, Arial, and other core Microsoft fonts are still some of the most commonly used fonts in documents and websites.  Times New Roman especially is often required for college essays, legal docs, and other critical documents that you may need to write or edit.  Ubuntu includes the Liberation alternate fonts that include similar alternates to Times New Roman, Arial, and Courier New, but these may not be accepted by professors and others when a certain font is required.  But, don’t worry; it only takes a couple clicks to add these fonts to Ubuntu for free. Installing the Core Microsoft Fonts Microsoft has released their core fonts, including Times New Roman and Arial, for free, and you can easily download these from the Software Center.  Open your Applications menu, and select Ubuntu Software Center.   In the search box enter the following: ttf-mscorefonts Click Install on the “Installer for Microsoft TrueType core fonts” directly in the search results. Enter your password when requested, and click Authenticate. The fonts will then automatically download and install in a couple minutes depending on your internet connection speed. Once the install is finished, you can launch OpenOffice Writer to try out the new fonts.  Here’s a preview of all the fonts included in this pack.  And, yes, this does included the infamous Comic Sans and Webdings fonts as well as the all-important Times New Roman. Please Note:  By default in Ubuntu, OpenOffice uses Liberation Serif as the default font, but after installing this font pack, the default font will switch to Times New Roman. Adding Other Fonts In addition to the Microsoft Core Fonts, the Ubuntu Software Center has hundreds of free fonts available.  Click the Fonts link on the front page to explore these, and install the same as above. If you’ve downloaded another font individually, you can also install it easily in Ubuntu.  Just double-click it, and then click Install in the preview window. Conclusion Although you may prefer the fonts that are included with Ubuntu, there are many reasons why having the Microsoft core fonts can be helpful.  Thankfully it’s easy in Ubuntu to install them, so you’ll never have to worry about not having them when you need to edit an important document. Similar Articles Productive Geek Tips Enable Smooth fonts on Ubuntu LinuxEmbed True Type Fonts in Word and PowerPoint 2007 DocumentsNew Vista Syntax for Opening Control Panel Items from the Command-lineStupid Geek Tricks: Enable More Fonts for the Windows Command PromptAdding extra Repositories on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook Recycle !

  Read the article

• Big Data – Buzz Words: What is MapReduce – Day 7 of 21

  - by Pinal Dave

  In yesterday’s blog post we learned what is Hadoop. In this article we will take a quick look at one of the four most important buzz words which goes around Big Data – MapReduce. What is MapReduce? MapReduce was designed by Google as a programming model for processing large data sets with a parallel, distributed algorithm on a cluster. Though, MapReduce was originally Google proprietary technology, it has been quite a generalized term in the recent time. MapReduce comprises a Map() and Reduce() procedures. Procedure Map() performance filtering and sorting operation on data where as procedure Reduce() performs a summary operation of the data. This model is based on modified concepts of the map and reduce functions commonly available in functional programing. The library where procedure Map() and Reduce() belongs is written in many different languages. The most popular free implementation of MapReduce is Apache Hadoop which we will explore tomorrow. Advantages of MapReduce Procedures The MapReduce Framework usually contains distributed servers and it runs various tasks in parallel to each other. There are various components which manages the communications between various nodes of the data and provides the high availability and fault tolerance. Programs written in MapReduce functional styles are automatically parallelized and executed on commodity machines. The MapReduce Framework takes care of the details of partitioning the data and executing the processes on distributed server on run time. During this process if there is any disaster the framework provides high availability and other available modes take care of the responsibility of the failed node. As you can clearly see more this entire MapReduce Frameworks provides much more than just Map() and Reduce() procedures; it provides scalability and fault tolerance as well. A typical implementation of the MapReduce Framework processes many petabytes of data and thousands of the processing machines. How do MapReduce Framework Works? A typical MapReduce Framework contains petabytes of the data and thousands of the nodes. Here is the basic explanation of the MapReduce Procedures which uses this massive commodity of the servers. Map() Procedure There is always a master node in this infrastructure which takes an input. Right after taking input master node divides it into smaller sub-inputs or sub-problems. These sub-problems are distributed to worker nodes. A worker node later processes them and does necessary analysis. Once the worker node completes the process with this sub-problem it returns it back to master node. Reduce() Procedure All the worker nodes return the answer to the sub-problem assigned to them to master node. The master node collects the answer and once again aggregate that in the form of the answer to the original big problem which was assigned master node. The MapReduce Framework does the above Map () and Reduce () procedure in the parallel and independent to each other. All the Map() procedures can run parallel to each other and once each worker node had completed their task they can send it back to master code to compile it with a single answer. This particular procedure can be very effective when it is implemented on a very large amount of data (Big Data). The MapReduce Framework has five different steps: Preparing Map() Input Executing User Provided Map() Code Shuffle Map Output to Reduce Processor Executing User Provided Reduce Code Producing the Final Output Here is the Dataflow of MapReduce Framework: Input Reader Map Function Partition Function Compare Function Reduce Function Output Writer In a future blog post of this 31 day series we will explore various components of MapReduce in Detail. MapReduce in a Single Statement MapReduce is equivalent to SELECT and GROUP BY of a relational database for a very large database. Tomorrow In tomorrow’s blog post we will discuss Buzz Word – HDFS. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• Things to install on a new machine – revisited

  - by RoyOsherove

  as I prepare to get a new dev machine at work, I write the things I am going to install on it, before writing the first line of code on that machine: Control Freak Tools: Everything Search Engine – a free and amazingly fast search engine for files all over your machine. (just file names, not inside files). This is so fast I use it almost as a replacement for my start menu, but it’s also great for finding those files that get hidden and tucked away in dark places on my system. Ever had a situation where you needed to see exactly how many copies of X.dll were hiding on your machine and where? this tool is perfect for that. Google Chrome. It’s just fast. very fast. and Firefox has become the IE of alternative browsers in terms of speed and memory. Don’t even get me started on IE. TweetDeck – get a complete view of what’s up on twitter Total Commander – my still favorite file manager, over five years now. KatMouse – will scroll any window your hovering on, even if it’s not an active window, when you use scroll the wheel on it. PowerIso or Daemon Tools – for loading up ISO images of discs LogMeIn Ignition – quick access to your LogMeIn computers for online Backup: JungleDisk or BackBlaze KeePass – save important passwords MS Security Essentials – free anti virus that’s quoest and doesn’t make a mess of your system. for home: uTorrent – a torrent client that can read rss feeds (like the ones from ezrss.it ) Camtasia Studio and SnagIt – for recording and capturing the screen, and then adding cool effects on top. Foxit PDF Reader – much faster that adove reader. Toddler Keys (for home) – for when your baby wants to play with your keyboard. Live Writer – for writing blog posts for Lenovo ThinkPads – Lenovo System Update – if you have a “custom” system instead of the one that came built in, this will keep all your lenovo drivers up to date. FileZilla – for FTP stuff All the utils from sysinternals, (or try the live-links) especially: AutoRuns for deciding what’s really going to load at startup, procmon to see what’s really going on with processes in your system   Developer stuff: Reflector. Pure magic. Time saver. See source code of any compiled assembly. Resharper. Great for productivity and navigation across your source code FinalBuilder – a commercial build automation tool. Love it. much better than any xml based time hog out there. TeamCity – a great visual and friendly server to manage continuous integration. powerful features. Test Lint – a free addin for vs 2010 I helped create, that checks your unit tests for possible problems and hints you about it. TestDriven.NET – a great test runner for vs 2008 and 2010 with some powerful features. VisualSVN – a commercial tool if you use subversion. very reliable addin for vs 2008 and 2010 Beyond Compare – a powerful file and directory comparison tool. I love the fact that you can right click in windows exporer on any file and select “select left side to compare”, then right click on another file and select “compare with left side”. Great usability thought! PostSharp 2.0 – for addind system wide concepts into your code (tracing, exception management). Goes great hand in hand with.. SmartInspect – a powerful framework and viewer for tracing for your application. lots of hidden features. Crypto Obfuscator – a relatively new obfuscation tool for .NET that seems to do the job very well. Crypto Licensing – from the same company –finally a licensing solution that seems to really fit what I needed. And it works. Fiddler 2 – great for debugging and tracing http traffic to and from your app. Debugging Tools for Windows and DebugDiag  - great for debugging scenarios. still wanting more? I think this should keep you busy for a while.   Regulator and Regulazy – for testing and generating regular expressions Notepad 2 – for quick editing and viewing with syntax highlighting

  Read the article

• Add Spell Checking to Your Favorite Windows Apps

  - by Asian Angel

  Some but not all Windows apps have built-in spell checking of some sort. If you want to add spell checking to all of your apps (or a select group) then join us as we look at tinySpell. Note: There is a paid version of this software (tinySpell+) available as well for those who want extra functionality. tinySpell in Action The installation process is simple and straightforward…as soon as you have finished installing tinySpell you will see your new “System Tray Icon”. You can see tinySpell’s “Context Menu” here. Before going any further you may want to have a look through the settings to make any desired display modifications. During our tests we found it very helpful to modify the Spelling Tip options…it will make for a much nicer and easier to read display when you have a spelling error. Clicking on the Applications… Command in the Context Menu will bring up the following window. You can really finesse how active tinySpell will be here: Create a special list of apps that tinySpell will not monitor Create a custom list of apps that tinySpell will monitor If you have any particular or unique words that you would like to add to tinySpell’s Dictionary ahead of time you can do that by clicking on the Dictionary… Command in the Context Menu. Want to check the spelling of a word ahead of time or find that you are just curious about how it is spelled? Click on Open spelling window in the Context Menu to access a special spell check window. For our example we misspelled “spelling” on purpose…notice that the word has turned red. Clicking on the Check Mark Button will open a drop-down list with suggested spellings for the word that you are inquiring about. Click on the appropriate listing if you intend to copy and paste the word. Next we moved on to Notepad. As we were typing tinySpell alerted us when we typed the word “app”. You will hear a small default system sound and see a small popup as shown here if tinySpell thinks a word has been misspelled. The System Tray Icon will also change to a yellow color. You can access the list of suggested spellings by either left clicking on the small popup or the System Tray Icon. If the word is a properly spelled “abbreviation” (or special/custom) like our word here you can select Add to dictionary. Going further in our text document we once again purposely misspelled “spelling”… Left clicking on the popup gave us access to the drop-down list of suggested spellings… And clicking on the correct spelling automatically inserted it into our document in place of the misspelled word. As you can see here tinySpell was even monitoring file names when we went to save the document. Very thorough indeed. Conclusion If your favorite app does not have built-in spell checking, then tinySpell will definitely be a welcome (and very helpful) addition to your Windows system. They offer a portable version as well so you can take it with you to any PC. Links Download tinySpell *Note: The download link is located approximately half-way down the page. Similar Articles Productive Geek Tips Quick Tip: Spell Check Firefox Text Input FieldsEdit the Windows Live Writer Custom DictionaryAccess Your Favorite Google Services in Chrome the Easy WayLaunch External Apps from FirefoxNinite Makes Installing Software Incredibly Simple TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 OpenDNS Guide Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app

  Read the article

• It’s the thought that counts…

  - by Tony Davis

  I recently finished editing a book called Tribal SQL, and it was a fantastic experience. It’s a community-sourced book written by first-timers. Fifteen previously unpublished authors contributed one chapter each, with the seemingly simple remit to write about “what makes them passionate about working with SQL Server, something that all SQL Server DBAs and developers really need to know”. Sure, some of the writing skills were a bit rusty as one would expect from busy people, but the ideas and energy were sheer nectar. Any seasoned editor can deal easily with the problem of fixing the output of untrained writers. We can handle with the occasional technical error too, which is why we have technical reviewers. The editor’s real job is to hone the clarity and flow of ideas, making the author’s knowledge and experience accessible to as many others as possible. What the writer needs to bring, on the other hand, is enthusiasm, attention to detail, common sense, and a sense of the person behind the writing. If any of these are missing, no editor can fix it. We can see these essential characteristics in many of the more seasoned and widely-published writers about SQL. To illustrate what I mean by enthusiasm, or passion, take a look at the work of Laerte Junior or Fabiano Amorim. Both authors have English as a second language, but their energy, enthusiasm, sheer immersion in a technology and thirst to know more, drives them, with a little editorial help, to produce articles of far more practical value than one can find in the “manuals”. There’s the attention to detail of the likes of Jonathan Kehayias, or Paul Randal. Read their work and one begins to understand the knowledge coupled with incredible rigor, the willingness to bend and test every piece of advice offered to make sure it’s correct, that marks out the very best technical writing. There’s the common sense of someone like Louis Davidson. All writers, including Louis, like to stretch the grey matter of their readers, but some of the most valuable writing is that which takes a complicated idea, or distils years of experience, and expresses it in a way that sounds like simple common sense. There’s personality and humor. Contrary to what you may have been told, they can and do mix well with technical writing, as long as they don’t become a distraction. Read someone like Rodney Landrum, or Phil Factor, for numerous examples of articles that teach hard technical lessons but also make you smile at least twice along the way. Writing well is not easy and it takes a certain bravery to expose your ideas and knowledge for dissection by others, but it doesn’t mean that writing should be the preserve only of those trained in the art, or best left to the MVPs. I believe that Tribal SQL is testament to the fact that if you have passion for what you do, and really know your topic then, with a little editorial help, you can write, and people will learn from what you have to say. You can read a sample chapter, by Mark Rasmussen, in this issue of Simple-Talk and I hope you’ll consider checking out the book (if you needed any further encouragement, it’s also for a good cause, Computers4Africa). Cheers, Tony  

  Read the article

• Asynchrony in C# 5: Dataflow Async Logger Sample

  - by javarg

  Check out this (very simple) code examples for TPL Dataflow. Suppose you are developing an Async Logger to register application events to different sinks or log writers. The logger architecture would be as follow: Note how blocks can be composed to achieved desired behavior. The BufferBlock<T> is the pool of log entries to be process whereas linked ActionBlock<TInput> represent the log writers or sinks. The previous composition would allows only one ActionBlock to consume entries at a time. Implementation code would be something similar to (add reference to System.Threading.Tasks.Dataflow.dll in %User Documents%\Microsoft Visual Studio Async CTP\Documentation): TPL Dataflow Logger var bufferBlock = new BufferBlock<Tuple<LogLevel, string>>(); ActionBlock<Tuple<LogLevel, string>> infoLogger =     new ActionBlock<Tuple<LogLevel, string>>(         e => Console.WriteLine("Info: {0}", e.Item2)); ActionBlock<Tuple<LogLevel, string>> errorLogger =     new ActionBlock<Tuple<LogLevel, string>>(         e => Console.WriteLine("Error: {0}", e.Item2)); bufferBlock.LinkTo(infoLogger, e => (e.Item1 & LogLevel.Info) != LogLevel.None); bufferBlock.LinkTo(errorLogger, e => (e.Item1 & LogLevel.Error) != LogLevel.None); bufferBlock.Post(new Tuple<LogLevel, string>(LogLevel.Info, "info message")); bufferBlock.Post(new Tuple<LogLevel, string>(LogLevel.Error, "error message")); Note the filter applied to each link (in this case, the Logging Level selects the writer used). We can specify message filters using Predicate functions on each link. Now, the previous sample is useless for a Logger since Logging Level is not exclusive (thus, several writers could be used to process a single message). Let´s use a Broadcast<T> buffer instead of a BufferBlock<T>. Broadcast Logger var bufferBlock = new BroadcastBlock<Tuple<LogLevel, string>>(     e => new Tuple<LogLevel, string>(e.Item1, e.Item2)); ActionBlock<Tuple<LogLevel, string>> infoLogger =     new ActionBlock<Tuple<LogLevel, string>>(         e => Console.WriteLine("Info: {0}", e.Item2)); ActionBlock<Tuple<LogLevel, string>> errorLogger =     new ActionBlock<Tuple<LogLevel, string>>(         e => Console.WriteLine("Error: {0}", e.Item2)); ActionBlock<Tuple<LogLevel, string>> allLogger =     new ActionBlock<Tuple<LogLevel, string>>(     e => Console.WriteLine("All: {0}", e.Item2)); bufferBlock.LinkTo(infoLogger, e => (e.Item1 & LogLevel.Info) != LogLevel.None); bufferBlock.LinkTo(errorLogger, e => (e.Item1 & LogLevel.Error) != LogLevel.None); bufferBlock.LinkTo(allLogger, e => (e.Item1 & LogLevel.All) != LogLevel.None); bufferBlock.Post(new Tuple<LogLevel, string>(LogLevel.Info, "info message")); bufferBlock.Post(new Tuple<LogLevel, string>(LogLevel.Error, "error message")); As this block copies the message to all its outputs, we need to define the copy function in the block constructor. In this case we create a new Tuple, but you can always use the Identity function if passing the same reference to every output. Try both scenarios and compare the results.

  Read the article

• Who Makes a Good Product Owner

  - by Robert May

  In general, the best product owners are those that care passionately about the customer of the product.  Note that I didn’t say about the product itself.  Actually, people that only care about the product, generally do not make good product owners.  Products only matter in relationship to their customers.  If a product doesn’t provide value to the customer, then the product has no value, no matter what a person might think of the product, and no matter what cool technologies exist inside of the product. A good product owner is also a good negotiator.  They recognize that many different priorities exist inside of a corporation, but that there can be only one list that developers work from.  A good product owner recognizes that its their job to help others around them prioritize (perhaps with a Product Council), but also understand that they alone have the final say about priorities and are willing to make the tough decisions required.  Deciding the priority between two perfectly valid stories is very difficult, especially when the stories are from two different departments! A good product owner is deeply interested in helping the team be successful.  They don’t seek to control the team, but instead seek to understand what the team can do and then work with the team to get the best product possible for the Customer.  A good product owner is never denigrating to team members, ever.  They recognize that such behavior would damage the trust that needs to be present between team members and product owners and will avoid it at all costs. In general, technical people (i.e. former or current developers) make poor product owners.  In their minds, they can’t separate implementation details from user functionality, so their stories end up sounding like implementation details.  For example, “The user enters their username on the password screen” is something that a technical product owner would write.  The proper wording for that story is “A user supplies the system with their credentials.”  Because technical people think different from the rest of the population, they are generally not a good fit. A good product owner is also a good writer.  Writing good stories demands good writing.  The art of persuasion, descriptiveness and just general good grammar are all required.  A good Product Owner must also be well spoken, since most of what will be conveyed will be conveyed with the spoken word, not just written word. A good product owner is a “People Person.”  They like talking to people and are very patient.  They don’t mind having questions repeated or fielding many questions, because they want to make sure that the ideas they’re conveying are properly understood so the customer gets the best product possible.  They are happy to answer any questions a team member may have and invite feedback and criticism of designs and stories, since they want a good product.  They really have little ego that gets in the way of building a great product. All of these qualities can be hard to find, but if you look close enough, you’ll find the right person in your organization.  Product owners can be found anywhere, not just in upper management.  Some of the best product owners are those that are very close to the customer.  In fact, check your customer support staff.  I’d bet that several great product owners are lurking there. Final note about what makes a good product owner.  You’re probably NOT going to find a good product owner in a manager, especially if they consider themselves a “Manager.”  Product owners don’t manage anything but the backlog, so be especially careful if the person you’re selecting for Product Owner is a manager. Up Next, “Messing with the Team.” Technorati Tags: Scrum,Product Owner

  Read the article

• Tech Ed/BI Conference 2010: A Recovering Industry in a Recovering City

  - by andrewbrust

  I tried writing a post for this blog last night, while at the this year’s Microsoft Tech Ed and Business Intelligence conferences, in New Orleans. But I literally fell asleep while writing it.  That’s probably a sign that my readers might have done the same while reading it. Why the writer’s block? This was a very good show for me, but I think I was having trouble figuring out exactly why.  Now that I’m on the flight home, I’m starting to piece it together. One reason, for sure, was that I’ve spent years in both the developer and the BI worlds, and a show that combined the two was really enjoyable for me.  Typically, the subject matter, the attendees, the Microsoft execs and managers, and even the social circles have been separate.  This year’s Tech Ed facilitated a fusion of each of these previously segregated groups.  That was good for me as a speaker; for example, I facilitated a Birds of a Feather session on PowerPivot (Microsoft’s new self-service BI offering) which was well-attended, and by a large number of non-BI pros.  The fusion was good for me as an attendee too, as Microsoft BI, in the form of a new Pivot Viewer control, made it into the Day 1 keynote, demoed by Microsoft’s key BI champion, Amir Netz.  And it was good for me socially, as I was able to meet with peers in both camps, and at one location. Speaking of meeting with industry colleagues, I did a lot of that at this show.  Probably for the first time ever, I carefully scheduled and conducted a series of meetings with friends and business acquaintances in the developer tools, data visualization, utilities, publishing and training areas of the Microsoft ecosystem.  Beside the time efficiencies in conducting so many meetings, I discovered another benefit. I got a real handle on the tech industry’s economic health. The news here is good.  First of all, 2010 has been a great year for just about everyone I spoke to.  The mood is positive, energy is high, and people are working really hard.  This is, of course, refreshing to see, and it’s a huge relief.  Add to that the fact that this year’s Tech Ed was about 2.5 times larger in headcount than last year’s (based on numbers from unofficial, but reliable, sources), and the economic prognosis seems excellent.  But there’s more to it than that. Here’s the thing: everyone I talked to seems to be working, and succeeding, at changing their business models to adapt to changes in the industry.  Whether it’s the Internet’s impact on publishing and training, the increased importance of the developer audience in South Asia, the shift of affordable developer and business talent to unfamiliar locales abroad, or even lapses in Microsoft’s performance in the market, partner companies aren’t just rolling with the punches; they’re welcoming the changes and working them to their advantage.  No one seemed downtrodden, or even fatigued.  Even for businesses who have seen core revenue streams become commoditized, everyone seems to be changing their market strategy and winning.  Even Microsoft, of whom I have been critical recently, showed signs of successful hard work and playbook change, in the maturing of their cloud strategy, their commitment to it and their excitement around it.  And the embedded, managed, self-service BI strategy that Microsoft has been touting looks like it’s already being embraced by customers, even though PowerPivot, and other new Microsoft BI products, were released only recently. The collective optimism I have witnessed, and that I have felt, tells me good things about this industry and the economy.  The stock market had huge mood swings during my stay, and that may yet subdue the industry recovery I have seen this week.  Nonetheless, I am convinced that a strong foundation of hard work, innovative thinking and, if I may,  true renaissance is underlying this industry’s success. That kind of strength will generate a strong recovery, I am certain, whether now or once we’re past another round of choppy weather in the broader economy.  The fundamentals are good.

  Read the article

• Praise for Europe's Smart Metering & Conservation Efforts

  - by caroline.yu

  Recently, a writer at the Home Energy Team praised the UK for its efforts towards smart metering and energy conservation, with an article entitled UK Blazing A Trail With Smart Metering At Home? The article highlighted that the Department of Energy and Climate Change has announced that smart metering will be introduced in the next decade and that all UK households will have smart meters by the year 2020. In fact, the UK is not the only country striving to achieve carbon reduction targets, as many of its European counterparts have begun to take positive steps towards tackling the issue of energy conservation by implementing innovative new metering and billing technologies as well as promoting alternative energy solutions, such as wind and solar power. Since 1997, the states of the European Union, including France, Germany and Spain, have been working towards achieving a target of 12 percent renewable energy electricity by 2010. Germany in particular has made a significant achievement so far, having surpassed the target early in 2007. This success is largely due to the German Renewable Energy Act (EEG), which promoted the use of renewable energy. Recently, analysis from the European Wind Energy Association (EWEA) found that 21 of the EU Member States are meeting or exceeding their national target to achieve 20 percent renewable energy by 2020. However, six states - Belgium, Italy, Luxembourg, Malta, Bulgaria and Denmark - say they will not manage to reach their target through domestic action alone. Bulgaria and Denmark believe that with fresh national initiatives they could meet or exceed their targets, but others, including Italy, may need to import renewable energy from neighboring non-EU countries. Top achievers, according to the EWEA report, are Spain, which believes its renewable energy will reach 22.7 percent by 2020, as well as Germany, Estonia, Greece, Ireland, Poland, Slovakia and Sweden, who will all exceed their targets. "Importantly, the way that this renewable energy is controlled and distributed must be addressed in order to ensure its success," said Bastian Fischer, vice president and general manager EMEA, Oracle Utilities. "A smart gird infrastructure can enable utilities to deal with load distribution in times of increased need and ensure power is always available from these means. A smart grid also underpins the success of metering and billing technologies, such as smart metering, and allows utilities to deal with increased usage data and provide accurate billing." Outside of Europe, Australia has made significant steps towards improving water conservation. The Australian Department of Sustainability and Environment took some of the recent advancements made in the energy sector, including new metering and billing solutions, and applied them to the water industry, enhancing customer service and reducing consumption as a result. The adoption of smart metering in Europe is mainly driven by regulation, but significant technological improvements are being made the world over to change the way we use all kinds of energy. However, the developing markets are lagging behind. One of the primary reasons for this is the lack of infrastructure in place to use as a foundation for setting up energy-saving solutions, which is slowing the adoption of technologies such as smart meters. However, these countries do benefit from fewer outdated infrastructure and legacy systems, which is often cited by others as a difficult barrier to deploying new solutions. As a result, some countries should find new technologies easier to implement and adapt to in the immediate future, without this roadblock.

  Read the article

• LexisNexis and Oracle Join Forces to Prevent Fraud and Identity Abuse

  - by Tanu Sood

  Author: Mark Karlstrand About the Writer:Mark Karlstrand is a Senior Product Manager at Oracle focused on innovative security for enterprise web and mobile applications. Over the last sixteen years Mark has served as director in a number of tech startups before joining Oracle in 2007. Working with a team of talented architects and engineers Mark developed Oracle Adaptive Access Manager, a best of breed access security solution.The world’s top enterprise software company and the world leader in data driven solutions have teamed up to provide a new integrated security solution to prevent fraud and misuse of identities. LexisNexis Risk Solutions, a Gold level member of Oracle PartnerNetwork (OPN), today announced it has achieved Oracle Validated Integration of its Instant Authenticate product with Oracle Identity Management.Oracle provides the most complete Identity and Access Management platform. The only identity management provider to offer advanced capabilities including device fingerprinting, location intelligence, real-time risk analysis, context-aware authentication and authorization makes the Oracle offering unique in the industry. LexisNexis Risk Solutions provides the industry leading Instant Authenticate dynamic knowledge based authentication (KBA) service which offers customers a secure and cost effective means to authenticate new user or prove authentication for password resets, lockouts and such scenarios. Oracle and LexisNexis now offer an integrated solution that combines the power of the most advanced identity management platform and superior data driven user authentication to stop identity fraud in its tracks and, in turn, offer significant operational cost savings. The solution offers the ability to challenge users with dynamic knowledge based authentication based on the risk of an access request or transaction thereby offering an additional level to other authentication methods such as static challenge questions or one-time password when needed. For example, with Oracle Identity Management self-service, the forgotten password reset workflow utilizes advanced capabilities including device fingerprinting, location intelligence, risk analysis and one-time password (OTP) via short message service (SMS) to secure this sensitive flow. Even when a user has lost or misplaced his/her mobile phone and, therefore, cannot receive the SMS, the new integrated solution eliminates the need to contact the help desk. The Oracle Identity Management platform dynamically switches to use the LexisNexis Instant Authenticate service for authentication if the user is not able to authenticate via OTP. The advanced Oracle and LexisNexis integrated solution, thus, both improves user experience and saves money by avoiding unnecessary help desk calls. Oracle Identity and Access Management secures applications, Juniper SSL VPN and other web resources with a thoroughly modern layered and context-aware platform. Users don't gain access just because they happen to have a valid username and password. An enterprise utilizing the Oracle solution has the ability to predicate access based on the specific context of the current situation. The device, location, temporal data, and any number of other attributes are evaluated in real-time to determine the specific risk at that moment. If the risk is elevated a user can be challenged for additional authentication, refused access or allowed access with limited privileges. The LexisNexis Instant Authenticate dynamic KBA service plugs into the Oracle platform to provide an additional layer of security by validating a user's identity in high risk access or transactions. The large and varied pool of data the LexisNexis solution utilizes to quiz a user makes this challenge mechanism even more robust. This strong combination of Oracle and LexisNexis user authentication capabilities greatly mitigates the risk of exposing sensitive applications and services on the Internet which helps an enterprise grow their business with confidence.Resources:Press release: LexisNexis® Achieves Oracle Validated Integration with Oracle Identity Management Oracle Access Management (HTML)Oracle Adaptive Access Manager (pdf)

  Read the article

• User interfirance, themes, Broken, Unreadable parts

  - by Adames

  Arther going on a customizing spree my the desktop themes on unity got messed up I had installed Ubuntu tweak and unsettings so I removed them but the default themes and custom ones are still messed up I ran unity --reset and this is what I get: WARNING: Unity currently default profile, so switching to metacity while resetting the values unity-panel-service: no process found Checking if settings need to be migrated ...no Checking if internal files need to be migrated ...no Backend : gconf Integration : true Profile : unity Adding plugins Initializing core options...done compiz (core) - Warn: failed to receive ConfigureNotify event on 0x1200004 compiz (core) - Warn: failed to receive ConfigureNotify event on 0x38000af compiz (core) - Warn: failed to receive ConfigureNotify event on 0x32000ad Initializing composite options...done Initializing opengl options...done Initializing decor options...done Initializing vpswitch options...done Initializing snap options...done Initializing mousepoll options...done Initializing resize options...done Initializing place options...done Initializing move options...done Initializing wall options...done Initializing grid options...done Initializing session options...done Initializing gnomecompat options...done Initializing animation options...done Initializing fade options...done Initializing unitymtgrabhandles options...done Initializing workarounds options...done Initializing scale options...done compiz (expo) - Warn: failed to bind image to texture Initializing expo options...done Initializing ezoom options...done (compiz:4749): GConf-CRITICAL **: gconf_client_add_dir: assertion `gconf_valid_key (dirname, NULL)' failed Initializing unityshell options...done compiz (core) - Warn: unhandled ConfigureNotify on 0xc0009e! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0xc000a1! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0xc000a1! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0xc000a4! compiz (core) - Warn: this should never happen. you should probably file a bug about this. WARN 2012-07-02 19:51:42 unity.libindicator <unknown>:0 Desktop file '/usr/share/applications/google-chrome.desktop' is using a deprecated format for its actions that will be dropped soon. WARN 2012-07-02 19:51:42 unity.libindicator <unknown>:0 Desktop file '/usr/share/applications/firefox.desktop' is using a deprecated format for its actions that will be dropped soon. WARN 2012-07-02 19:51:42 unity.libindicator <unknown>:0 Desktop file '/usr/share/applications/libreoffice-writer.desktop' is using a deprecated format for its actions that will be dropped soon. WARN 2012-07-02 19:51:42 unity.libindicator <unknown>:0 Desktop file '/usr/share/applications/libreoffice-calc.desktop' is using a deprecated format for its actions that will be dropped soon. WARN 2012-07-02 19:51:42 unity.libindicator <unknown>:0 Desktop file '/usr/share/applications/libreoffice-impress.desktop' is using a deprecated format for its actions that will be dropped soon. Initializing addhelper options...done Initializing animationaddon options...done Initializing annotate options...done Initializing bench options...done Initializing blur options...done Initializing clone options...done Initializing colorfilter options...done Initializing commands options...done Initializing crashhandler options...done Initializing cube options...done Initializing cubeaddon options...done Initializing extrawm options...done Initializing fadedesktop options...done Initializing firepaint options...done Initializing group options...done Initializing imgjpeg options...done Initializing kdecompat options...done Initializing loginout options...done Initializing mag options...done Initializing maximumize options...done Initializing mblur options...done Initializing neg options...done Initializing notification options...done Initializing obs options...done Initializing opacify options...done Initializing put options...done Initializing reflex options...done Initializing resizeinfo options...done Initializing ring options...done Initializing rotate options...done Initializing scaleaddon options...done Initializing scalefilter options...done Initializing screenshot options...done Initializing shelf options...done Initializing shift options...done Initializing showdesktop options...done Initializing showmouse options...done Initializing splash options...done Initializing staticswitcher options...done Initializing switcher options...done Initializing td options...done Initializing thumbnail options...done Initializing trailfocus options...done Initializing wallpaper options...done Initializing water options...done Initializing widget options...done Initializing winrules options...done Initializing wobbly options...done ERROR 2012-07-02 19:51:43 unity.glib-gobject <unknown>:0 g_object_unref: assertion `G_IS_OBJECT (object)' failed Setting Update "main_menu_key" Setting Update "run_key" Setting Update "autoraise" Setting Update "autoraise_delay" Any Ideas? this is very inconvenient some of the text like in additional drivers are unreadable because they come out White

  Read the article

• Partner Blog: Hub City Media Introduces iPad Application for Oracle Identity Analytics

  - by Tanu Sood

  About the Writer:Steve Giovannetti is CTO of Hub City Media, Inc., a company that specializes in implementation and product development on the Oracle Identity Management platform. Recently, Hub City Media announced the introduction of iPad application IdentityCert for Oracle Identity Analytics. This post explore the business use cases and application of IdentityCert.Hub City Media(HCM) has been deploying certification solutions based on Oracle Identity Analytics since it first appeared on the market as Vaau RBACx. With each deployment we've seen the same pattern repeat time and time again:1. Customers suffering under the weight of manual access certification regimens deploy Oracle Identity Analytics (OIA) for automated certification. 2. OIA improves the frequency, speed, accuracy, and participation of certifications across the organization. 3. Then the certifiers, typically managers and supervisors, ask, “Is there any easier way to do these certifications offline?”The current version of OIA has a way to export certification data to a spreadsheet.  For some customers, we've leveraged this feature and combined it with some of our own custom code to provide a solution based on spreadsheet exports and imports.  Customers export the certification to Microsoft Excel, complete it, and then import the spreadsheet to OIA. It worked well for offline certification, but if the user accidentally altered the format of the spreadsheet, the import of the data could fail. We were close to a solution but it wasn’t reliable.Over the past few years, we've seen the proliferation of Apple iOS devices, specifically the iPhone and iPad, in the enterprise.  As our customers were asking for offline certification, we noticed the same population of users traditionally responsible for access certification, were early adopters of the iPad. The environment seemed ideal for us to create an iPad application to support offline certifications using Oracle Identity Analytics. That’s why we created IdentityCert™.IdentityCert allows users to view their analytics dashboard, complete user certifications, and resolve policy violations with OIA, from their iPads.The current IdentityCert analytics dashboard displays the same charts that are available in the Oracle Identity Analytics product. However, we plan to expand the number of available analytics in future releases.The main function of IdentityCert is user certification which can be performed quickly and efficiently using a simple touch interface. Managers tap into a certification, use simple gestures to claim users and certify their access.  Certifications can be securely downloaded to IdentityCert and can be completed with or without a network connection. The user can upload the completed certifications once they are connected to a cellular or wi-fi network.Oracle Identity Analytics can generate policy violation notifications based on detective scans of identity warehouse or via preventative analysis of identity access requests. IdentityCert allows users to view all policy violations, resolve, or delegate them to appropriate users. IdentityCert also analyzes the policy violation expression and produces more human friendly descriptions of the policy violation which improves the ability of users to resolve the violation. IdentityCert can be deployed quickly into a customer's environment. It is deployed with Hub City Media's ID Services to connect Oracle Identity Analytics securely with the iPad application.Oracle Identity Management 11g R2 is an important evolutionary release. Oracle's Identity Management suite has more characteristics of a cohesive platform. This platform provides an integrated set of identity services that can be used to protect, manage, and audit security within the enterprise. At HCM we take the platform concept a step further and see it as an opportunity to create unique solutions for Oracle Identity Management customers. IdentityCert is our commitment to this platform. You can download IdentityCert from the Apple iOS App Store today. It includes a demo dataset that you can use to explore the functions of the product without any server infrastructure. Download it. Give it a try. We would appreciate your interest and welcome any feedback.Resources:Press Release: Hub City Media Introduces iPad Application IdentityCert™ for Oracle Identity AnalyticsApp Store Download: http://bit.ly/IdentityCertOracle Identity Governance Suite

  Read the article

• DataContractSerializer: type is not serializable because it is not public?

  - by Michael B. McLaughlin

  I recently ran into an odd and annoying error when working with the DataContractSerializer class for a WP7 project. I thought I’d share it to save others who might encounter it the same annoyance I had. So I had an instance of  ObservableCollection<T> that I was trying to serialize (with T being a class I wrote for the project) and whenever it would hit the code to save it, it would give me: The data contract type 'ProjectName.MyMagicItemsClass' is not serializable because it is not public. Making the type public will fix this error. Alternatively, you can make it internal, and use the InternalsVisibleToAttribute attribute on your assembly in order to enable serialization of internal members - see documentation for more details. Be aware that doing so has certain security implications. This, of course, was malarkey. I was trying to write an instance of MyAwesomeClass that looked like this: [DataContract] public class MyAwesomeClass { [DataMember] public ObservableCollection<MyMagicItemsClass> GreatItems { get; set; }   [DataMember] public ObservableCollection<MyMagicItemsClass> SuperbItems { get; set; }     public MyAwesomeClass { GreatItems = new ObservableCollection<MyMagicItemsClass>(); SuperbItems = new ObservableCollection<MyMagicItemsClass>(); } }   That’s all well and fine. And MyMagicItemsClass was also public with a parameterless public constructor. It too had DataContractAttribute applied to it and it had DataMemberAttribute applied to all the properties and fields I wanted to serialize. Everything should be cool, but it’s not because I keep getting that “not public” exception. I could tell you about all the things I tried (generating a List<T> on the fly to make sure it wasn’t ObservableCollection<T>, trying to serialize the the Collections directly, moving it all to a separate library project, etc.), but I want to keep this short. In the end, I remembered my the “Debug->Exceptions…” VS menu option that brings up the list of exception-related circumstances under which the Visual Studio debugger will break. I checked the “Thrown” checkbox for “Common Language Runtime Exceptions”, started the project under the debugger, and voilà: the true problem revealed itself. Some of my properties had fairly elaborate setters whose logic I wanted to ignore. So for some of them, I applied an IgnoreDataMember attribute to them and applied the DataMember attribute to the underlying fields instead. All of which, in line with good programming practices, were private. Well, it just so happens that WP7 apps run in a “partial trust” environment and outside of “full trust”-land, DataContractSerializer refuses to serialize or deserialize non-public members. Of course that exception was swallowed up internally by .NET so all I ever saw was that bizarre message about things that I knew for certain were public being “not public”. I changed all the private fields I was serializing to public and everything worked just fine. In hindsight it all makes perfect sense. The serializer uses reflection to build up its graph of the object in order to write it out. In partial trust, you don’t want people using reflection to get at non-public members of an object since there are potential security problems with allowing that (you could break out of the sandbox pretty quickly by reflecting and calling the appropriate methods and cause some havoc by reflecting and setting the appropriate fields in certain circumstances. The fact that you cannot reflect your own assembly seems a bit heavy-handed, but then again I’m not a compiler writer or a framework designer and I have no idea what sorts of difficulties would go into allowing that from a compilation standpoint or what sorts of security problems allowing that could present (if any). So, lesson learned. If you get an incomprehensible exception message, turn on break on all thrown exceptions and try running it again (it might take a couple of tries, depending) and see what pops out. Chances are you’ll find the buried exception that actually explains what was going on. And if you’re getting a weird exception when trying to use DataContractSerializer complaining about public types not being public, chances are you’re trying to serialize a private or protected field/property.

  Read the article

• Swap not available on System Monitor

  - by Zaki

  I had a swap partition of 1GB (RAM 1GB, Ubuntu 12.04 lts). Now swap is not shown on System Monitor neither can I hibernate my pc (sudo pm-hibernate). blkid output: /dev/sda1: UUID="B8B4FBB1B4FB706C" TYPE="ntfs" /dev/sda2: UUID="2ea7d608-2d89-4e41-9436-d05cb3ce8871" TYPE="swap" /dev/sda3: UUID="3219d03a-67e4-454b-8ce7-a27831846e35" TYPE="ext4" /dev/sda5: LABEL="Softwares" UUID="AC1CC3301CC2F47C" TYPE="ntfs" /dev/sda6: LABEL="Education" UUID="1E103E6C103E4B53" TYPE="ntfs" /dev/sda7: LABEL="Recreation" UUID="2CC8D181C8D149AA" TYPE="ntfs" /dev/sda8: LABEL="Miscellaneous" UUID="0274D6B174D6A727" TYPE="ntfs" /etc/fstab # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=3219d03a-67e4-454b-8ce7-a27831846e35 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=2ea7d608-2d89-4e41-9436-d05cb3ce8871 none swap sw 0 0 free -m total used free shared buffers cached Mem: 991 867 123 0 27 418 -/+ buffers/cache: 421 569 Swap: 0 0 0 cat /proc/swaps Filename Type Size Used Priority fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9f369f36 Device Boot Start End Blocks Id System /dev/sda1 * 63 31471334 15735636 7 HPFS/NTFS/exFAT /dev/sda2 31471616 33470447 999416 82 Linux swap / Solaris /dev/sda3 33472512 62539775 14533632 83 Linux /dev/sda4 62541045 312592769 125025862+ f W95 Ext'd (LBA) /dev/sda5 62541108 125066024 31262458+ 7 HPFS/NTFS/exFAT /dev/sda6 125066088 187591004 31262458+ 7 HPFS/NTFS/exFAT /dev/sda7 187591068 250115984 31262458+ 7 HPFS/NTFS/exFAT /dev/sda8 250116048 312576704 31230328+ 7 HPFS/NTFS/exFAT swapon --all swapon: /dev/sda2: swapon failed: Invalid argument dmesg | grep -A 5 -B 5 -i swap [ 9.487404] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 131645 [ 9.487413] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 131330 [ 9.487418] EXT4-fs (sda3): 16 orphan inodes deleted [ 9.487420] EXT4-fs (sda3): recovery complete [ 9.578600] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 20.580539] Swap area shorter than signature indicates [ 20.588363] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.619443] udevd[330]: starting version 175 [ 20.649959] lp: driver loaded but no devices found [ 20.662972] [drm] Initialized drm 1.1.0 20060810 [ 20.675515] i915 0000:00:02.0: setting latency timer to 64 -- [ 72.288573] PM: thaw of drv:sr dev:3:0:0:0 complete after 178.143 msecs [ 72.288578] PM: thaw of drv:scsi_device dev:3:0:0:0 complete after 178.136 msecs [ 72.299677] PM: thaw of drv:scsi_device dev:2:0:0:0 complete after 189.270 msecs [ 72.309473] PM: thaw of devices complete after 202.763 msecs [ 72.309668] PM: writing image. [ 72.309670] PM: Cannot find swap device, try swapon -a. [ 72.309699] PM: Cannot get swap writer [ 72.329896] Restarting tasks ... done. [ 72.331777] PM: Basic memory bitmaps freed [ 72.331792] video LNXVIDEO:00: Restoring backlight state [ 72.420048] option1 ttyUSB0: option_instat_callback: error -84 [ 72.804047] option1 ttyUSB0: option_instat_callback: error -84 -- [ 145.960625] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 145.972036] sd 7:0:0:0: [sdb] Attached SCSI removable disk [ 172.430508] PPP BSD Compression module registered [ 172.455583] PPP Deflate Compression module registered [ 332.260789] type=1400 audit(1381814763.342:27): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=636 comm="cupsd" pid=636 comm="cupsd" capability=36 capname="block_suspend" [ 1913.030998] Swap area shorter than signature indicates [ 2022.530155] type=1400 audit(1381816453.610:28): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=636 comm="cupsd" pid=636 comm="cupsd" capability=36 capname="block_suspend" [ 4062.729509] Swap area shorter than signature indicates Please help. Thanks in advance. df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 14G 6.1G 7.0G 47% / udev 488M 4.0K 488M 1% /dev tmpfs 199M 868K 198M 1% /run none 5.0M 4.0K 5.0M 1% /run/lock none 496M 224K 496M 1% /run/shm

  Read the article

• Ask the Readers: Would You Be Willing to Give Windows Up and Use a Different O.S.?

  - by Asian Angel

  When it comes to computers, Windows definitely rules the desktop in comparison to other operating systems. What we would like to know this week is if you would actually be willing to give up using Windows altogether and move to a different operating system on your computers. Note: This week’s Ask the Readers post is posing a hypothetical situation, so please refrain from starting arguments or a flame war in the comments. Good reasoned discussion is always welcome. There is no doubt that Windows is the dominant operating system in use today. Everywhere you go or look it is easy to find computers with Windows installed such as at work, home, the library, government offices, and more. For many people it is the operating system that they know and are comfortable with, which makes changing to a different operating system less appealing. Adding to the preference for Windows (or dependency based on your view) is the custom software that many businesses use on a daily basis. Throw in the high volume of people who depend on and use Microsoft Office as a standard for their business documents and it is little wonder that Windows is so dominant. So what would you use if you did decide to take a break from or permanently move away from Windows? If your choice is Linux then you have a large and wonderful variety of distributions to choose from based on what you want out of your system. Want a distribution that is easy to work with? You could choose Ubuntu, Linux Mint, or others that are engineered to be ready to go “out of the box”. Like a challenge? Perhaps Arch Linux is more your style. One of the most attractive features of all about Linux is the price…it is very hard to beat free! Maybe Mac OS X sounds like the perfect choice. It has a certain mystique and elegance associated with it and many OS X fans refuse to use anything else if given a choice. Then there is the soon to be released Chrome OS with its’ emphasis on cloud computing. This is a system that is definitely focused on being as low-maintenance and hassle-free as possible. Quick on, quick off, minimalist, and made to be portable. All of the system’s updates will occur automatically leaving you free to work and play in the cloud. But it does have its’ limitations…no installing all of those custom apps that you love using on Windows or other systems…it is literally all about the browsing window and web apps. So there you have it. If the opportunity presented itself would you, could you give Windows up and use a different operating system? Would it be easy or hard for you to do? Perhaps it would not really matter so long as you could do what you needed or wanted to do on a computer. And maybe this is the perfect time to try something new and find out…that new favorite operating system could be just an install disc away. Let us know your thoughts in the comments! How-To Geek Polls require Javascript. Please Click Here to View the Poll. Latest Features How-To Geek ETC The Complete List of iPad Tips, Tricks, and Tutorials The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor The Brothers Mario – Epic Gangland Style Mario Brothers Movie Trailer [Video] Score Awesome Games on the Cheap with the Humble Indie Bundle Add a Colorful Christmas Theme to Your Windows 7 Desktop This Windows Hack Changes the Blue Screen of Death to Red Edit Images Quickly in Firefox with Pixlr Grabber Zoho Writer, Sheet, and Show Now Available in Chrome Web Store

  Read the article

• Incomplete upgrade 12.04 to 12.10

  - by David

  Everything was running smoothly. Everything had been downloaded from Internet, packages had been installed and a prompt asked for some obsolete programs/files to be removed or kept. After that the computer crashed and and to manually force a shutdown. I turned it on again and surprise I was on 12.10! Still the upgrade was not finished! How can I properly finish that upgrade? Here's the output I got in the command line after following posted instructions: i astrill - Astrill VPN client software i dayjournal - Simple, minimal, digital journal. i gambas2-gb-form - A gambas native form component i gambas2-gb-gtk - The Gambas gtk component i gambas2-gb-gtk-ext - The Gambas extended gtk GUI component i gambas2-gb-gui - The graphical toolkit selector component i gambas2-gb-qt - The Gambas Qt GUI component i gambas2-gb-settings - Gambas utilities class i A gambas2-runtime - The Gambas runtime i google-chrome-stable - The web browser from Google i google-talkplugin - Google Talk Plugin i indicator-keylock - Indicator for Lock Keys i indicator-ubuntuone - Indicator for Ubuntu One synchronization s i A language-pack-kde-zh-hans - KDE translation updates for language Simpl i language-pack-kde-zh-hans-base - KDE translations for language Simplified C i libapt-inst1.4 - deb package format runtime library idA libattica0.3 - a Qt library that implements the Open Coll idA libbabl-0.0-0 - Dynamic, any to any, pixel format conversi idA libboost-filesystem1.46.1 - filesystem operations (portable paths, ite idA libboost-program-options1.46.1 - program options library for C++ idA libboost-python1.46.1 - Boost.Python Library idA libboost-regex1.46.1 - regular expression library for C++ i libboost-serialization1.46.1 - serialization library for C++ idA libboost-signals1.46.1 - managed signals and slots library for C++ idA libboost-system1.46.1 - Operating system (e.g. diagnostics support idA libboost-thread1.46.1 - portable C++ multi-threading i libcamel-1.2-29 - Evolution MIME message handling library i libcmis-0.2-0 - CMIS protocol client library i libcupsdriver1 - Common UNIX Printing System(tm) - Driver l i libdconf0 - simple configuration storage system - runt i libdvdcss2 - Simple foundation for reading DVDs - runti i libebackend-1.2-1 - Utility library for evolution data servers i libecal-1.2-10 - Client library for evolution calendars i libedata-cal-1.2-13 - Backend library for evolution calendars i libedataserver-1.2-15 - Utility library for evolution data servers i libexiv2-11 - EXIF/IPTC metadata manipulation library i libgdu-gtk0 - GTK+ standard dialog library for libgdu i libgdu0 - GObject based Disk Utility Library idA libgegl-0.0-0 - Generic Graphics Library idA libglew1.5 - The OpenGL Extension Wrangler - runtime en i libglew1.6 - OpenGL Extension Wrangler - runtime enviro i libglewmx1.6 - OpenGL Extension Wrangler - runtime enviro i libgnome-bluetooth8 - GNOME Bluetooth tools - support library i libgnomekbd7 - GNOME library to manage keyboard configura idA libgsoap1 - Runtime libraries for gSOAP i libgweather-3-0 - GWeather shared library i libimobiledevice2 - Library for communicating with the iPhone i libkdcraw20 - RAW picture decoding library i libkexiv2-10 - Qt like interface for the libexiv2 library i libkipi8 - library for apps that want to use kipi-plu i libkpathsea5 - TeX Live: path search library for TeX (run i libmagickcore4 - low-level image manipulation library i libmagickwand4 - image manipulation library i libmarblewidget13 - Marble globe widget library idA libmusicbrainz4-3 - Library to access the MusicBrainz.org data i libnepomukdatamanagement4 - Basic Nepomuk data manipulation interface i libnux-2.0-0 - Visual rendering toolkit for real-time app i libnux-2.0-common - Visual rendering toolkit for real-time app i libpoppler19 - PDF rendering library i libqt3-mt - Qt GUI Library (Threaded runtime version), i librhythmbox-core5 - support library for the rhythmbox music pl i libusbmuxd1 - USB multiplexor daemon for iPhone and iPod i libutouch-evemu1 - KernelInput Event Device Emulation Library i libutouch-frame1 - Touch Frame Library i libutouch-geis1 - Gesture engine interface support i libutouch-grail1 - Gesture Recognition And Instantiation Libr idA libx264-120 - x264 video coding library i libyajl1 - Yet Another JSON Library i linux-headers-3.2.0-29 - Header files related to Linux kernel versi i linux-headers-3.2.0-29-generic - Linux kernel headers for version 3.2.0 on i linux-image-3.2.0-29-generic - Linux kernel image for version 3.2.0 on 64 i mplayerthumbs - video thumbnail generator using mplayer i myunity - Unity configurator i A openoffice.org-calc - office productivity suite -- spreadsheet i A openoffice.org-writer - office productivity suite -- word processo i python-brlapi - Python bindings for BrlAPI i python-louis - Python bindings for liblouis i rts-bpp-dkms - rts-bpp driver in DKMS format. i system76-driver - Universal driver for System76 computers. i systemconfigurator - Unified Configuration API for Linux Instal i systemimager-client - Utilities for creating an image and upgrad i systemimager-common - Utilities and libraries common to both the i systemimager-initrd-template-am - SystemImager initrd template for amd64 cli i touchpad-indicator - An indicator for the touchpad i ubuntu-tweak - Ubuntu Tweak i A unity-lens-utilities - Unity Utilities lens i A unity-scope-calculator - Calculator engine i unity-scope-cities - Cities engine i unity-scope-rottentomatoes - Unity Scope Rottentomatoes

  Read the article

• SQL Server IO handling mechanism can be severely affected by high CPU usage

  - by sqlworkshops

  Are you using SSD or SAN / NAS based storage solution and sporadically observe SQL Server experiencing high IO wait times or from time to time your DAS / HDD becomes very slow according to SQL Server statistics? Read on… I need your help to up vote my connect item – https://connect.microsoft.com/SQLServer/feedback/details/744650/sql-server-io-handling-mechanism-can-be-severely-affected-by-high-cpu-usage. Instead of taking few seconds, queries could take minutes/hours to complete when CPU is busy.In SQL Server when a query / request needs to read data that is not in data cache or when the request has to write to disk, like transaction log records, the request / task will queue up the IO operation and wait for it to complete (task in suspended state, this wait time is the resource wait time). When the IO operation is complete, the task will be queued to run on the CPU. If the CPU is busy executing other tasks, this task will wait (task in runnable state) until other tasks in the queue either complete or get suspended due to waits or exhaust their quantum of 4ms (this is the signal wait time, which along with resource wait time will increase the overall wait time). When the CPU becomes free, the task will finally be run on the CPU (task in running state).The signal wait time can be up to 4ms per runnable task, this is by design. So if a CPU has 5 runnable tasks in the queue, then this query after the resource becomes available might wait up to a maximum of 5 X 4ms = 20ms in the runnable state (normally less as other tasks might not use the full quantum).In case the CPU usage is high, let’s say many CPU intensive queries are running on the instance, there is a possibility that the IO operations that are completed at the Hardware and Operating System level are not yet processed by SQL Server, keeping the task in the resource wait state for longer than necessary. In case of an SSD, the IO operation might even complete in less than a millisecond, but it might take SQL Server 100s of milliseconds, for instance, to process the completed IO operation. For example, let’s say you have a user inserting 500 rows in individual transactions. When the transaction log is on an SSD or battery backed up controller that has write cache enabled, all of these inserts will complete in 100 to 200ms. With a CPU intensive parallel query executing across all CPU cores, the same inserts might take minutes to complete. WRITELOG wait time will be very high in this case (both under sys.dm_io_virtual_file_stats and sys.dm_os_wait_stats). In addition you will notice a large number of WAITELOG waits since log records are written by LOG WRITER and hence very high signal_wait_time_ms leading to more query delays. However, Performance Monitor Counter, PhysicalDisk, Avg. Disk sec/Write will report very low latency times.Such delayed IO handling also occurs to read operations with artificially very high PAGEIOLATCH_SH wait time (with number of PAGEIOLATCH_SH waits remaining the same). This problem will manifest more and more as customers start using SSD based storage for SQL Server, since they drive the CPU usage to the limits with faster IOs. We have a few workarounds for specific scenarios, but we think Microsoft should resolve this issue at the product level. We have a connect item open – https://connect.microsoft.com/SQLServer/feedback/details/744650/sql-server-io-handling-mechanism-can-be-severely-affected-by-high-cpu-usage - (with example scripts) to reproduce this behavior, please up vote the item so the issue will be addressed by the SQL Server product team soon.Thanks for your help and best regards,Ramesh MeyyappanHome: www.sqlworkshops.comLinkedIn: http://at.linkedin.com/in/rmeyyappan

  Read the article

• Guaranteed Restore Points as Fallback Method

  - by Mike Dietrich

  Thanks to the great audience yesterday in the Upgrade & Migration Workshop in Utrecht. That was really fun and I was amazed by our new facilities (and the  "wellness" lights surrounding the plenum room's walls). And another reason why I like to do these workshops is that often I learn new things from you So credits here to Rick van  Ek who has highlighted the following topic to me. Yesterday (and in some previous workshops) I did mention during the discussion about Fallback Strategies that you'll have to switch on Flashback Database beforehand to create a guaranteed restore point in case you'll encounter an issue during the database upgrade. I knew that we've made it possible since Oracle Database 11.2 to switch Flashback Database on without taking the database into MOUNT status (you could switch it off anyway while the database is open before in all releases). But before Oracle Database 11.2 that did require MOUNT status. SQL> create restore point rp1 guarantee flashback database ; create restore point rp1 guarantee flashback database * ERROR at line 1: ORA-38784: Cannot create restore point 'RP1'. ORA-38787: Creating the first guaranteed restore point requires mount mode when flashback database is off. But Rick did mention that I won't need to switch Flashback Database On to create a guaranteed restore point. And he's right - in older releases I would have had to go into MOUNT state to define the restore point which meant to restart the database. But in 11.2 that's no necessary anymore. And the same will apply when you upgrade your pre-11.2 database (e.g. an Oracle Database 10.2.0.4) to Oracle Database 11.2. As soon as you start your "old" not-yet-upgraded database in your 11.2 environment with STARTUP UPGRADE you can define a guaranteed restore point. If you tail the alert.log you'll see that the database will start the RVWR (Recovery Writer) background process - you'll just have to make sure that you'd define the values for db_recovery_file_dest_size and db_recovery_file_dest. SQL> startup upgrade ORACLE instance started. Total System Global Area  417546240 bytes Fixed Size                  2228944 bytes Variable Size             134221104 bytes Database Buffers          272629760 bytes Redo Buffers                8466432 bytes Database mounted. Database opened. SQL> create restore point grpt guarantee flashback database; Restore point created.SQL> drop restore point grpt; And don't forget to drop that restore point the sooner or later as it is guaranteed - and will fill up your Fast Recovery Area pretty quickly Just on the side: in any case archivelog mode is required if you'd like to work with restore points. - Mike

  Read the article

• Why Apple’s New SDK Limitation is So Offensive

  - by TStewartDev

  I am not an Apple fanboy, nor have I ever been. However, I have owned a Mac, an iPod, and an iPhone in my lifetime, and for more than a decade, I have defended Apple against the untruths that the haters so enjoy spewing. I encouraged my wife to buy a MacBook when she needed a new laptop two years ago, and I often recommend them to my friends and relatives. I have proudly and happily used my first generation iPhone for nearly three years. Now, for the first time in well over ten years, I find myself ready to swear off Apple and encourage everyone I know to do the same. I was disappointed when Apple wouldn't allow native apps, but I still bought the iPhone. I've stomached their ambiguous app approval process even though it's apparent that Steve may just reject your app because he doesn't like you or feels threatened by you (I'm still lamenting the rejection of the Google Voice app). But, as a developer, I can no longer tolerate Apple's terms and the kind of totalitarian control they indicate Apple wants. In case you are not already familiar, Apple has dictated in their OS 4.0 SDK license agreement (the now infamous Section 3.3.1) that all apps developed for the iPhone must be coded in C, C++, or Objective C, and moreover, that using any cross-compiling platforms is a violation of the agreement. For those of you who aren't developers, let me try to illustrate why this angers those of us who are. Imagine you're a professional writer. You've had articles published in some journals and magazines, and you've got a couple popular books out there, too. You've got an idea for a new book, and so you take it to your publisher. Your publisher agrees that it's a good idea. "But," says the publisher, "we want to hold our books to a tighter standard so that our readers get the experience we want them to have. Therefore, from now on, all our writers may only use words from this list of the 10,000 most common English words. Furthermore, if you cite any other works or quote anyone, they must comply with that same list, or you'll have to rewrite the entire work as well in case our readers want to look up your citation." What do you do? If your work is a children's book, this probably isn't a big deal to you. If it's an autobiography, textbook, or even a novel, though, you're going to have a lot of trouble describing your content with only common words. It's going to take you longer to complete your book, too, since you'll be looking up less common words frequently to see if you can use them. You could always go to another publisher, but this one has the best ability to distribute your book. The next largest distributor can only do a quarter as much. You could abandon the project altogether, but then everyone loses. Isn't this a silly scenario? Who would put such a limitation on writers? Yet this is very much what Apple is doing. They are using their dominant position in the market to coerce developers to write their apps exclusively for the iPhone OS by making it too expensive to write for multiple platforms. It is at least a threefold attack, striking at Adobe who is set to release a compiler that lets Flash source be compiled to iPhone binaries; striking at Google whose Android platform stands the best chance at the moment of providing serious competition to the iPhone; and reinforcing their own strong position by keeping popular apps exclusively to iPhone. And while developers are already very upset about this, the sad fact is that most of us will cave and give in to Apple because consumers don't know any better. They will continue to buy Apple's toy forcing developers to play Apple's maniacal game in order to make any money, at least until Steve Jobs decides he doesn't like them or he intends to release a competing application (bye-bye OpenFeint). Apple has been kept in check on the desktop front by a very dominant Microsoft, but I'm afraid that their success with iPods, iTunes, and iPhones has created a monster that we may have to bear until it is slain by an anti-trust suit or dies with the retirement of Steve Jobs.

  Read the article

• Dual monitor not working completely in 12.10 after upgrade

  - by Mark Baldridge

  At 12.04, dual monitors worked perfectly. After upgrading to 12.10, the primary monitor works, the second monitor only partly works. I am sure there is some difference between the releases that I have missed setting properly. System settings - Displays show both correctly as Acer 22" monitors at 1680x1050 (16:10). An icon on monitor 2 is present, but elongated; almost an artifact, since other icons on the primary screen are absent, but this one icon is there on th second monitor. Selecting the icons on both screens exist. Painting is weird on monitor 2. Launcher exists and works on both screens, but even with sticky edges off, the cursor stops at the left edge of monitor 2. Clicking on text editor on screen 2 launcer will launch gedit there. If I drag it, it leaves a trail of after images like repaint is failing. If I drive the cursor on the launcher, the help tags like "LibreOffice Writer" appear, but stay on screen unless I drag the active gedit window over them. Then part of the help bubbles are overwritten, leaving behind after images of the gedit window on screen. What is really fascinating is that the System settings - Displays is now ignoring monitor selection, after allowing it earlier. Just before this, the help popup which said "Select a monitor to change its properties; drag to rearrange its placement" actually let me do that. Maybe a trick of where I grab the edge of the monitor in the Displays setting. I just found a working handle. When I drag monitor 1 to the right of monitor 2, "Apply" and confirm, both monitors work normally (although the right monitor lets the cursor slide off the right edge onto the left edge of monitor 1 - which sounds correct). Painting of windows does not leave an after image. However, success is only temporary. The setting survives the reboot, but painting on the left monitor, now monitor 2, now replicates the issues from before. The after image of the gedit window and the small window for "Are you sure you want to close all programs and restart the computer?" are still on monitor 2 (on the left now), even though they are not real windows, nor do they have processes behind them. Curiously, in Displays, the "green" monitor on the left in the display window is matched by the right monitor color in the monitor upper left corner. Probably makes sense as the one on the right is now monitor 1. If I repeat the "drag the left monitor to the right of the right monitor on the "Displays" window, things are oriented properly, with no display artifacts as I drag windows around either screen. Also the description bubbles that pop up are overwritten on both screens, so none of those artifacts either. This goodness does not survive a reboot, however. Have not tried logging out and back in. All of this after positing that the motherboard VGA and HDMI ports could have been the issue. So, I installed an e-GeForce 7600 GT Dual DVI (I know the web thinks it is not DVI, but VGA, but the connectors are DVI). No change to the weird behavior. The good parts continue to work, the weirdness also works, and swapping monitor positions seems to cure the issue. So, is there a setting I have missed? Given "swapping" monitor 1 and 2 on the System Settings... - Displays makes it work, just not across boot, I suspect so.

  Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >