Search Results

Search found 18911 results on 757 pages for 'device manager'.

Page 360/757 | < Previous Page | 356 357 358 359 360 361 362 363 364 365 366 367  | Next Page >

• Network Services disabled (not starting) on Windows XP

  - by Rickesh John

  I am currently running Windows XP Service Pack 3 on my system. But today, when I failed to connect to the internet, via a LAN cable, I realized that almost all of the vital network services had stopped functioning. Any attempts to start it through services.msc gives me the following message: Could not start the DNS Client Service on Local Computer Error 1068: The dependency service group failed to start All my software or services that are related to networking have stopped functioning, for example, Windows Firewall is turned off permanently, so is my Avast Anti-Virus' service of Real Time Shields and Web Shield. When I insert the LAN wire into my laptop, it registers itself, but this is what I get when I do a ping localhost C:>ping localhost Unable to contact IP driver, error code 2 Moveover, with ipconfig I get this : Windows IP Configuration An internal error occurred: The request is not supported. Please contact Microsoft Product Support Services for further help. Additional Information: Unable to query host name On some further poking around, I saw that none of the "NETWORK SERVICE" process in task manager, except svchost.exe were running. Also, when I first opened the task manager, I saw some 20 processes running with username column empty for most of them. With some search in Google, I found out that these services were important, DHCP DNS Net logon Network connection Network location Awareness TCP/IP Net BIOS Helper none of them, except Network Connections are working, they do not start. The event viewer of my system shows a bunch of 7000 and 7001 event errors. I have tried re installing the network driver, booting in safe mode with networking and tried to enable those services mentioned above. I had disabled System Restore some time back, so I have no restore points for my system. I tried a lot of things from Google searches but none of them worked. Also, with such a long list of issue, I am a little confused as to what should I search on the internet. :( One more thing I would like to mention, previous morning, my anti-virus Avast detected a RootKit buried deep in my system folders. It was removed, but maybe this was a problem caused by the root kit. I did run a boot-time scan but no viruses were found. Please please please advice. Is formatting and re-installation of Windows my only option?

  Read the article

• Is there a way to save the installed app list on Windows 8 RP?

  - by Tural Teyyuboglu

  I'm testing Windows 8 RP. Installed tens of apps from market. What I wanna know is, is there any way to save (or maybe sync with Windows Live account) installed app list, and install these saved applications in future - RTM version of OS? I mean, somehing like on Apples' devices - icloud features function that I'm talking about. You can install apps on iPhone and sync with iCloud account. Then you can re-install these apps on another device, which signed in with your login into icloud.

  Read the article

• How to flip video feed that's presented upside down?

  - by Zuul

  Skype an other applications running under windows 7 Ultimate are presenting the video captured from the laptop built-in webcam upside down. I've tried many solution that I was able to find regarding issues like this, but to no avail. Some of the most relevant are discussed here: From Skype Support Network, the thread why is my video image of myself upside-down??? From ASUSTek Forums, the thread Built-in camera upside down Both present several potential solutions to this issue, but I've been unable to fix it for the laptop ASUS U6S. What I've already tried: Changing Drivers The driver that works must be the one from Windows, all others available from ASUS drivers either don't install or install but the webcam doesn't provide any video feed. This disallows all options that concern using an older driver or editing the .inf file as to manually adjust the settings. ASUS does not provide drivers for Windows 7, so I've used drivers from Windows Vista 32 Bit. Using the application manycam This application actually solves the issue (temporarily), but creates new ones: If I use the application to flip the video feed, Skype video call cease to work. This application doesn't save the settings, at least I wasn't able to find any way to save the settings I've used to flip the video feed. A computer restart brings all back to how it was, video feed upside down and if the application is still installed, Skype continues to fail on video calls. Regedit I've searched thru Windows Registry Editor as to find any reference to the webcam settings, hopping to find a key with the Flip parameter, since it's up to the driver to flip the image (by what I could ascertain from this problem). Couldn't find any reference to such settings, either they actually don't exist within the Windows Registry or they use some weird name that I could think off. System Configuration I was able to access the webcam system settings from the Windows Device Manager, but the tab that actually has the Image Rotation setting is always disabled. The same goes for the settings available from the Skype webcam options (that essentially is presenting the same settings as Windows Device Manager, just within a custom Skype pop-up). Question: How can I flip the video feed from the laptop's built-in webcam, as to properly see and broadcast the video?

  Read the article

• Trackpad and USB mouse - different settings

  - by soupagain

  On my laptop I use both the trackpad and an external USB mouse. I'd like different settings for each device. e.g. the mouse is high resolution so I prefer to use a slow mouse settings, and for the trackpad I prefer to use the "Enhance pointer precision" option. But I can only seem to set these option for both devices, not individually. Can this be done? [Windows 7]

  Read the article

• Killing a process that keeps respawning

  - by terabytest

  I got infected by a virus. It looks like I removed it, but it somehow injected a few more processes (I can see them in the task manager) that respawn when I kill them (somehow). Is there a way to destroy those process to stop them from respawning, or in the case something else is respawning them, to kill that "something"?

  Read the article

• Windows 7 Startup Problems with Ethernet Driver

  - by c00lryguy

  Everytime I restart Windows 7, my Ethernet Driver can't connect: And I have to go into Device Manager - Network Adapters and disable then enable the Realtek PCIe GBE Family Controller to connect to the internet. And now, lately everytime I start up, I've been getting this error: Why do these happen when I start up Windows?

  Read the article

• Slow and unresponssive network

  - by Jason94

  Ive have the Nokia N900 mobile phone (running Maemo linux), and my device is really slow while using the wifi and trying to get stuff online (checking mail, loading pages). The webbrowsers itself (MicroB, Firefox, Opera) starts fast. Yesterday ive tried to set the dns to googles but that did not solve the case. Is there, and how do i check/verify my connection to the internet if im connected to my home wifi in linux? (tools, other then ping :D)

  Read the article

• Is there a peripheral that lets my computer monitor the connectivity of pairs of wires?

  - by raldi

  I've got a bunch of physical switches and circuits that act like switches (they're either connected to ground or they're just an open wire). Is there some sort of thing I can plug into my computer (ideally, via USB) that has a bunch of screw terminals, and I can attach wires to the screws and have the computer keep track of which circuits are closed and which are open? Bonus points if the device also lets the computer open and close switches, too. I don't even know what to google for.

  Read the article

• Maximum number of hard drives in a build-your-own NAS solution [closed]

  - by groovehunter

  My IT department has a bunch of older 160/320GB Drives. I'd like to use them in a build-your-own NAS device. What limitations exist in regards to the maximum number of drives that can be connected to typical commodity hardware that might be used in a situation like this? EDIT okay I like to specify my question is what to search for to find a storage controller which can handle many drives. I simply cannot find the right search terms.

  Read the article

• who are the goldengate extract users

  - by sharif

  I am setting up golden gate, this installation guide is quite confusing as it refers to steps which have not been done or already done previously. I am on step 4.8.1 on the ''oracle installation guide''. I is asking for ''Extract'' user name. I do not recall creating such other than the goldengate user. Also what are the other four users it refers to as in 4.6 Extract Replicat Manager DEFGEN what is the usernames for each of these in the db?

  Read the article

• How to mount LUKS partition securely on server

  - by Ency

  I'm curious if it is possible to mount a partition encrypted by cryptsetup with LUKS securely and automatically on Ubuntu 10.0.4 LTS. For example, if I use the key for the encrypted partition, than that key has to be presented on a device that is not encrypted and if someone steals my disk they'll be able to find the key and decrypt the partition. Is there any safe way to mount an encrypted partition? If not, does anything exist to do what I want?

  Read the article

• Symbol LL500 Scanner Interface Not Detected

  - by agentfll

  I have an old Symbol LL500 scanner interface box and a scanner to go with it. The box's original cable used one of the old microsoft mouse connectors, but I got a converter to USB. The problem is that when I connect it to my MacBook, the interface powers up and works, but the computer dosen't recognize it or even say that a device is connected. Is there any way to make it see that the interface is there or am I just screwed?

  Read the article

• UDISKS instead of HAL

  - by MeJ

  Does anybody have some expirence with udisks, because HAL won't be longer supported on the most linux distribution, so I am thinking of to use udisks for UDI in $(hal-find-by-property --key storage.bus --string usb) do HAL_TMP=`hal-get-property --udi $UDI --key storage.removable.media_available` if [ "$HAL_TMP" = "true" ]; then HAL_DEV=$(hal-get-property --udi $UDI --key block.device) HAL_SIZE=$(hal-get-property --udi $UDI --key storage.removable.media_size) HAL_TYPE=$(hal-get-property --udi $UDI --key storage.drive_type) How do I have to adapt the above mentioned commands but use udisks instead of hal Thanks!

  Read the article

• Nokia PC Suite hangs at installing required drivers and doesn't connect to phone

  - by SpongeBob SquarePants

  I am unable to connect my Nokia 2690 to my PC via data cable using Nokia PC Suite under Windows XP SP3 Pro 32 bit. Every time I connect my mobile using the data cable, the Nokia App shows a window where it says it's "Installing the required drivers. Please wait". But even after several hours my phone never conects to my PC and the screen remains there idle. I checked in he task manager, Nokia PC Suite didn't go unresponsive.

  Read the article

• Create VPN between windows and sonic wall

  - by Chris Lively

  I'm trying to establish a VPN connection between our Windows 2008 R2 server and a client's SonicWall device. The problem is, I'm not entirely sure where to start. I thought I could just add it to RRAS but this doesn't appear to work (times out), I'm not entirely sure I did that right anyway. My server is hosted on an EC2 instance if that matters. My question then is how should I go about establishing this type of connection?

  Read the article

• Error 5 partition table invalid or corrupt

  - by Clodoaldo

  I'm trying to add a second SSD to a Centos 6 system. But I get the Error 5 partition table invalid or corrupt at boot. The system already has a single SSD (sdb) and a pair of HDDs (sd{a,c}) in a RAID 1 array from where it boots. It is as if the new SSD assumes one of the devices of the RAID array. Is it? How to avoid that or rearrange the setup? # cat fstab UUID=967b4035-782d-4c66-b22f-50244fe970ca / ext4 defaults 1 1 UUID=86fd06e9-cdc9-4166-ba9f-c237cfc43e02 /boot ext4 defaults 1 2 UUID=72552a7a-d8ae-4f0a-8917-b75a6239ce9f /ssd ext4 discard,relatime 1 2 UUID=8000e5e6-caa2-4765-94f8-9caeb2bda26e swap swap defaults 0 0 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 # ll /dev/disk/by-id/ total 0 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 ata-OCZ-VERTEX3_OCZ-43DSRFTNCLE9ZJXX -> ../../sdb lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-OCZ-VERTEX3_OCZ-43DSRFTNCLE9ZJXX-part1 -> ../../sdb1 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 ata-ST3500413AS_5VMT49E3 -> ../../sdc lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMT49E3-part1 -> ../../sdc1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMT49E3-part2 -> ../../sdc2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMT49E3-part3 -> ../../sdc3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 ata-ST3500413AS_5VMTJNAJ -> ../../sda lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMTJNAJ-part1 -> ../../sda1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMTJNAJ-part2 -> ../../sda2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMTJNAJ-part3 -> ../../sda3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-name-localhost.localdomain:0 -> ../../md0 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-name-localhost.localdomain:1 -> ../../md1 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-name-localhost.localdomain:2 -> ../../md2 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-uuid-a04d7241:8da6023e:f9004352:107a923a -> ../../md1 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-uuid-a22c43b9:f1954990:d3ddda5e:f9aff3c9 -> ../../md0 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-uuid-f403a2d0:447803b5:66edba73:569f8305 -> ../../md2 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 scsi-SATA_OCZ-VERTEX3_OCZ-43DSRFTNCLE9ZJXX -> ../../sdb lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_OCZ-VERTEX3_OCZ-43DSRFTNCLE9ZJXX-part1 -> ../../sdb1 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMT49E3 -> ../../sdc lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMT49E3-part1 -> ../../sdc1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMT49E3-part2 -> ../../sdc2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMT49E3-part3 -> ../../sdc3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMTJNAJ -> ../../sda lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMTJNAJ-part1 -> ../../sda1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMTJNAJ-part2 -> ../../sda2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMTJNAJ-part3 -> ../../sda3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 wwn-0x5000c500383621ff -> ../../sdc lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c500383621ff-part1 -> ../../sdc1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c500383621ff-part2 -> ../../sdc2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c500383621ff-part3 -> ../../sdc3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 wwn-0x5000c5003838b2e7 -> ../../sda lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c5003838b2e7-part1 -> ../../sda1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c5003838b2e7-part2 -> ../../sda2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c5003838b2e7-part3 -> ../../sda3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 wwn-0x5e83a97f592139d6 -> ../../sdb lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5e83a97f592139d6-part1 -> ../../sdb1 # fdisk -l Disk /dev/sdb: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x79298ec9 Device Boot Start End Blocks Id System /dev/sdb1 1 14594 117219328 83 Linux Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d99de Device Boot Start End Blocks Id System /dev/sdc1 1 1275 10240000 fd Linux raid autodetect /dev/sdc2 * 1275 1339 512000 fd Linux raid autodetect /dev/sdc3 1339 60802 477633536 fd Linux raid autodetect Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000b3327 Device Boot Start End Blocks Id System /dev/sda1 1 1275 10240000 fd Linux raid autodetect /dev/sda2 * 1275 1339 512000 fd Linux raid autodetect /dev/sda3 1339 60802 477633536 fd Linux raid autodetect Disk /dev/md0: 10.5 GB, 10484641792 bytes 2 heads, 4 sectors/track, 2559727 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table Disk /dev/md2: 489.1 GB, 489095557120 bytes 2 heads, 4 sectors/track, 119408095 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md2 doesn't contain a valid partition table Disk /dev/md1: 524 MB, 524275712 bytes 2 heads, 4 sectors/track, 127997 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md1 doesn't contain a valid partition table # cat /etc/grub.conf default=0 timeout=5 splashimage=(hd2,1)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.32-220.17.1.el6.x86_64) root (hd2,1) kernel /vmlinuz-2.6.32-220.17.1.el6.x86_64 ro root=UUID=967b4035-782d-4c66-b22f-50244fe970ca rd_MD_UUID=f403a2d0:447803b5:66edba73:569f8305 rd_MD_UUID=a22c43b9:f1954990:d3ddda5e:f9aff3c9 rd_NO_LUKS rd_NO_LVM rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=br-abnt2 crashkernel=auto rhgb quiet initrd /initramfs-2.6.32-220.17.1.el6.x86_64.img

  Read the article

• Is there an equivalent to Airfoil available for Linux?

  - by Chris Adams

  Hi there, I just stumbled across this Airfoil on Mac OS X, which lets me 'throw' music from my laptop to any other linux machine, iPhone or other device hooked up to a better set of speakers than my laptop - here's the page below: http://www.rogueamoeba.com/airfoil/mac/ What tools would I use to recreate this functionality on a linux box - are there any nice GUI interfaces to something like pulse audio (which is what I imagine I'd use ) for doing this? Thanks

  Read the article

• Networking Mac OS X 10.6 and Vista via ethernet?

  - by Moshe

  How can I make Vista home premium access OS X hard drive? and the other way around? I'd like to transfer files via direct ethernet. Plugging in an ethernet cable makes both computers recognize a network, but not the other device. Each firewall is turned off, but no luck. Edit: I don't see Windows Sharing in the Service Column.

  Read the article

• Win2003 R2 - 1.5TB disks not identified

  - by JohnyD

  I just installed 4 1.5TB hard disks (WD) in two servers (2 in each). Upon reboot they are not showing up in the disk manager whatsoever. I'm running Windows Server 2003 EE (32bit) with 8GB ram. They both currently have mirrored 300GB sata disks. Why aren't they being recognized? Is there a disk size limit for win2k3 r2?

  Read the article

• why allow windows to disable one core? [closed]

  - by saber tabatabaee yazdi

  i teach MCITP for students and when describe about Disabling a Device Drivers , one of them ask me : why allow windows to disable drivers that windows need them? why windows allows to disable drivers, like disable cpu? like disabling graphic card? windows in many cases cant apply but allow to disabling CPU or etc. i am searching and find articles that describe how to disable CPU. but i am not Convinced WHY WE CAN DISABLE THESE drivers!!

  Read the article

• How could I fix WICD? it's not longer finding networks

  - by poz2k4444

  I'm on backtrack5 R2, and I was working fine, the problem is recently the WICD is no longer finding networks, but I can still connect to the networks I had, I've tried with dpkg-reconfigure wicd and after restart not noticeable change is done, how can I connect new networks or reconfigure again the manager?? When I search networks with airomon-ng mon0 I can find some but with the WICD not, thanks!!

  Read the article

• CPU running at full capacity when boot to DOS?

  - by Kevin H

  Does the CPU is run at 100% or near full capacity when the computer is booted into MS-DOS? Will the CPU temperature become higher even though we are not running any program in DOS mode? In Windows, we can see the CPU usage in % of utilization in Task Manager. From what I heard, CPU is running at near 100% capacity in DOS OS or in the BIOS MAIN screen. Is this caused by lack of CPU optimization in DOS OS?

  Read the article

• Ubuntu 12.04: Does grub support multidevice boot from btrfs?

  - by Propantriol

  I'm using Ubuntu 12.04 LTS (Precise Pangolin) with grub 1.99. I installed on a RAID10 multidevice BTRFS partition. I thought that multidevice support is included in grub for a while but on boot I'm dropped to a initramfs shell, because it fails to mount root ("invalid argument"). This is actually the same message I get if I want to mount a btrfs volume without executing btrfs device scan. Therefore I wonder: Does Ubuntu's grub version even support boot from btrfs mutlidevice ?

  Read the article

• What is the recommended firmware for TP-LINK TL-WR841ND?

  - by arscariosus

  What would be the best firmware for this cheap router? I know it depends on what I wanted to do with it, but I would like to hear some answers especially those who have used this before or is currently using it now. The default firmware is okay, but I have the itch to tweak so I flashed it with dd-wrt. I would like to hear some pros and cons regarding different firmwares and why it works best on this device.

  Read the article

• Connect android to linux laptop [closed]

  - by Claudio Ferraro

  I've a laptop with linux and wanna to connect an android device to the linux machine. On linux i have an mpd server installed. wanna to be able to connect from an android mpd client to the server which resides on the laptop. I tryed to create an Ad-hoc Wifi network on linux but the Android cannot find the Wifi network..How can I proceed..Should I buy a wifi hotspot or something like that ? I've a wifi router , it could help me somehow ?

  Read the article

< Previous Page | 356 357 358 359 360 361 362 363 364 365 366 367  | Next Page >