Search Results

Search found 10033 results on 402 pages for 'fuzz testing'.

Page 360/402 | < Previous Page | 356 357 358 359 360 361 362 363 364 365 366 367  | Next Page >

• SQL Saturday 43 in Redmond

  - by AjarnMark

  I attended my first SQLSaturday a couple of days ago, SQLSaturday #43 in Redmond (at Microsoft).  I got there really early, primarily because I forgot how fast I can get there from my home when nobody else is on the road.  On a weekday in rush hour traffic, that would have taken two hours to get there.  I gave myself 90 minutes, and actually got there in about 45.  Crazy! I made the mistake of going to the main Microsoft campus, but that’s not where the event was being held.  Instead it was in a big Microsoft conference center on the other side of the highway.  Fortunately, I had the address with me and quickly realized my mistake.  When I got back on track, I noticed that there were bright yellow signs out on the street corner that looked like they said they were for SOL Saturday, which actually was appropriate since it was the sunniest day around here in a long time. Since I was there so early, the registration was just getting setup, so I found Greg Larsen who was coordinating things and offered to help.  He put me to work with a group of people organizing the pre-printed raffle tickets and stuffing swag bags. I had never been to a SQLSaturday before this one, so I wasn’t exactly sure what to expect even though I have read about a few on some blogs.  It makes sense that each one will be a little bit different since they are almost completely volunteer driven, and the whole concept is still in its early stages.  I have been to the PASS Summit for the last several years, and was hoping for a smaller version of that.  Now, it’s not really fair to compare one free day of training run entirely by volunteers with a multi-day, $1,000+ event put on under the direction of a professional event management company.  But there are some parallels. At this SQLSaturday, there was no opening general session, just coffee and pastries in the common area / expo hallway and straight into the first group of sessions.  I don’t know if that was because there was no single room large enough to hold everyone, or for other reasons.  This worked out okay, but the organization guy in me would have preferred to have even a 15 minute welcome message from the organizers with a little overview of the day.  Even something as simple as, “Thanks to persons X, Y, and Z for helping put this together…Sessions will start in 20 minutes and are all in rooms down this hallway…the bathrooms are on the other side of the conference center…lunch today is pizza and we would like to thank sponsor Q for providing it.”  It doesn’t need to be much, certainly not a full-blown Keynote like at the PASS Summit, but something to use as a rallying point to pull everyone together and get the day off to an official start would be nice.  Again, there may have been logistical reasons why that was not feasible here.  I’m just putting out my thoughts for other SQLSaturday coordinators to consider. The event overall was great.  I believe that there were over 300 in attendance, and everything seemed to run smoothly.  At least from an attendee’s point of view where there was plenty of muffins in the morning and pizza in the afternoon, with plenty of pop to drink.  And hey, if you’ve got the food and drink covered, a lot of other stuff could go wrong and people will be very forgiving.  But as I said, everything appeared to run pretty smoothly, at least until Buck Woody showed up in his Oracle shirt.  Other than that, the volunteers did a great job! I was a little surprised by how few people in my own backyard that I know.  It makes sense if you really think about it, given how many companies must be using SQL Server around here.  I guess I just got spoiled coming into the PASS Summit with a few contacts that I already knew would be there.  Perhaps I have been spending too much time with too few people at the Summits and I need to step out and meet more folks.  Of course, it also is different since the Summit is the big national event and a number of the folks I know are spread out across the country, so the Summit is the only time we’re all in the same place at the same time.  I did make a few new contacts at SQLSaturday, and bumped into a couple of people that I knew (and a couple others that I only knew from Twitter, and didn’t even realize that they were here in the area). Other than the sheer entertainment value of Buck Woody’s session, the one that was probably the greatest value for me was a quick introduction to PowerShell.  I have not done anything with it yet, but I think it will be a good tool to use to implement my plans for automated database recovery testing.  I saw just enough at the session to take away some of the intimidation factor, and I am getting ready to jump in and see what I can put together in the next few weeks.  And that right there made the investment worthwhile.  So I encourage you, if you have the opportunity to go to a SQLSaturday event near you, go for it!

  Read the article

• Super Joybox 5 HID 0925:8884 not recognized as joystick in Ubuntu 12.04 LTS

  - by Tim Evans

  Problem: When using the "Super JoyBox 5" 4 port playstation 2 to USB adapter, the device is not recognized as a joystick. there is no js0 created, but instead another input eventX and mouseX are created in /dev/input. When using the directional buttons (up down left right) on a Playstation 1 controller attached to the device, the mouse cursor moves to the top, bottom, left, and right edges of the screen respectively. Buttons are unresponsive. The joypads attached to the device cannot be used in any games or other programs. Attempted remedies: Creating a symlink from the eventX to js0 does not solve the problem. Addl Info: joydev is loaded and running peroperly according to LSMOD. evtest can be run on the created eventX (sudo evtest /dev/input/event14 in my case) and the buttons and axes all register inputs. Here is a paste of EVTEST's diagnostic and the first couple button events. [code] sudo evtest /dev/input/event14 Input driver version is 1.0.1 Input device ID: bus 0x3 vendor 0x925 product 0x8884 version 0x100 Input device name: "HID 0925:8884" Supported events: Event type 0 (EV_SYN) Event type 1 (EV_KEY) Event code 288 (BTN_TRIGGER) Event code 289 (BTN_THUMB) Event code 290 (BTN_THUMB2) Event code 291 (BTN_TOP) Event code 292 (BTN_TOP2) Event code 293 (BTN_PINKIE) Event code 294 (BTN_BASE) Event code 295 (BTN_BASE2) Event code 296 (BTN_BASE3) Event code 297 (BTN_BASE4) Event code 298 (BTN_BASE5) Event code 299 (BTN_BASE6) Event code 300 (?) Event code 301 (?) Event code 302 (?) Event code 303 (BTN_DEAD) Event code 304 (BTN_A) Event code 305 (BTN_B) Event code 306 (BTN_C) Event code 307 (BTN_X) Event code 308 (BTN_Y) Event code 309 (BTN_Z) Event code 310 (BTN_TL) Event code 311 (BTN_TR) Event code 312 (BTN_TL2) Event code 313 (BTN_TR2) Event code 314 (BTN_SELECT) Event code 315 (BTN_START) Event code 316 (BTN_MODE) Event code 317 (BTN_THUMBL) Event code 318 (BTN_THUMBR) Event code 319 (?) Event code 320 (BTN_TOOL_PEN) Event code 321 (BTN_TOOL_RUBBER) Event code 322 (BTN_TOOL_BRUSH) Event code 323 (BTN_TOOL_PENCIL) Event code 324 (BTN_TOOL_AIRBRUSH) Event code 325 (BTN_TOOL_FINGER) Event code 326 (BTN_TOOL_MOUSE) Event code 327 (BTN_TOOL_LENS) Event code 328 (?) Event code 329 (?) Event code 330 (BTN_TOUCH) Event code 331 (BTN_STYLUS) Event code 332 (BTN_STYLUS2) Event code 333 (BTN_TOOL_DOUBLETAP) Event code 334 (BTN_TOOL_TRIPLETAP) Event code 335 (BTN_TOOL_QUADTAP) Event type 3 (EV_ABS) Event code 0 (ABS_X) Value 127 Min 0 Max 255 Flat 15 Event code 1 (ABS_Y) Value 127 Min 0 Max 255 Flat 15 Event code 2 (ABS_Z) Value 127 Min 0 Max 255 Flat 15 Event code 3 (ABS_RX) Value 127 Min 0 Max 255 Flat 15 Event code 4 (ABS_RY) Value 127 Min 0 Max 255 Flat 15 Event code 5 (ABS_RZ) Value 127 Min 0 Max 255 Flat 15 Event code 6 (ABS_THROTTLE) Value 127 Min 0 Max 255 Flat 15 Event code 7 (ABS_RUDDER) Value 127 Min 0 Max 255 Flat 15 Event code 8 (ABS_WHEEL) Value 127 Min 0 Max 255 Flat 15 Event code 9 (ABS_GAS) Value 127 Min 0 Max 255 Flat 15 Event code 10 (ABS_BRAKE) Value 127 Min 0 Max 255 Flat 15 Event code 11 (?) Value 127 Min 0 Max 255 Flat 15 Event code 12 (?) Value 127 Min 0 Max 255 Flat 15 Event code 13 (?) Value 127 Min 0 Max 255 Flat 15 Event code 14 (?) Value 127 Min 0 Max 255 Flat 15 Event code 15 (?) Value 127 Min 0 Max 255 Flat 15 Event code 16 (ABS_HAT0X) Value 0 Min -1 Max 1 Event code 17 (ABS_HAT0Y) Value 0 Min -1 Max 1 Event code 18 (ABS_HAT1X) Value 0 Min -1 Max 1 Event code 19 (ABS_HAT1Y) Value 0 Min -1 Max 1 Event code 20 (ABS_HAT2X) Value 0 Min -1 Max 1 Event code 21 (ABS_HAT2Y) Value 0 Min -1 Max 1 Event code 22 (ABS_HAT3X) Value 0 Min -1 Max 1 Event code 23 (ABS_HAT3Y) Value 0 Min -1 Max 1 Event type 4 (EV_MSC) Event code 4 (MSC_SCAN) Testing ... (interrupt to exit) Event: time 1351223176.126127, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90001 Event: time 1351223176.126130, type 1 (EV_KEY), code 288 (BTN_TRIGGER), value 1 Event: time 1351223176.126166, -------------- SYN_REPORT ------------ Event: time 1351223178.238127, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90001 Event: time 1351223178.238130, type 1 (EV_KEY), code 288 (BTN_TRIGGER), value 0 Event: time 1351223178.238167, -------------- SYN_REPORT ------------ Event: time 1351223180.422127, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90002 Event: time 1351223180.422129, type 1 (EV_KEY), code 289 (BTN_THUMB), value 1 Event: time 1351223180.422163, -------------- SYN_REPORT ------------ Event: time 1351223181.558099, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90002 Event: time 1351223181.558102, type 1 (EV_KEY), code 289 (BTN_THUMB), value 0 Event: time 1351223181.558137, -------------- SYN_REPORT ------------ Event: time 1351223182.486137, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90003 Event: time 1351223182.486140, type 1 (EV_KEY), code 290 (BTN_THUMB2), value 1 Event: time 1351223182.486172, -------------- SYN_REPORT ------------ Event: time 1351223183.302130, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90003 Event: time 1351223183.302132, type 1 (EV_KEY), code 290 (BTN_THUMB2), value 0 Event: time 1351223183.302165, -------------- SYN_REPORT ------------ Event: time 1351223184.030133, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90004 Event: time 1351223184.030136, type 1 (EV_KEY), code 291 (BTN_TOP), value 1 Event: time 1351223184.030166, -------------- SYN_REPORT ------------ Event: time 1351223184.558135, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90004 Event: time 1351223184.558138, type 1 (EV_KEY), code 291 (BTN_TOP), value 0 Event: time 1351223184.558168, -------------- SYN_REPORT ------------ [/code] The directional buttons on the pad are being identified as HAT0Y and HAT0X axes, thats zero, not the letter O. Aparently, this device used to work flawlessly on kernel 2.4.x systems, and even as late as ubunto 10.04. Perhaps the Joydev rules for identifying joypads has changed? Currently, this kind of bug is affecting a few different type of controller adapters, but since this is the one that i PERSONALLY have (and has been driving me my own special brand of crazy), its the one im documenting. What i think should be happening instead: The device should be registering js0 through js3, one for each port, or JS0 that will handle all of the connected devices with different numbered axes for each connected joypad. Either way, it should work as a joystick and stop controlling the mouse cursor. Please help!

  Read the article

• Why lock-free data structures just aren't lock-free enough

  - by Alex.Davies

  Today's post will explore why the current ways to communicate between threads don't scale, and show you a possible way to build scalable parallel programming on top of shared memory. The problem with shared memory Soon, we will have dozens, hundreds and then millions of cores in our computers. It's inevitable, because individual cores just can't get much faster. At some point, that's going to mean that we have to rethink our architecture entirely, as millions of cores can't all access a shared memory space efficiently. But millions of cores are still a long way off, and in the meantime we'll see machines with dozens of cores, struggling with shared memory. Alex's tip: The best way for an application to make use of that increasing parallel power is to use a concurrency model like actors, that deals with synchronisation issues for you. Then, the maintainer of the actors framework can find the most efficient way to coordinate access to shared memory to allow your actors to pass messages to each other efficiently. At the moment, NAct uses the .NET thread pool and a few locks to marshal messages. It works well on dual and quad core machines, but it won't scale to more cores. Every time we use a lock, our core performs an atomic memory operation (eg. CAS) on a cell of memory representing the lock, so it's sure that no other core can possibly have that lock. This is very fast when the lock isn't contended, but we need to notify all the other cores, in case they held the cell of memory in a cache. As the number of cores increases, the total cost of a lock increases linearly. A lot of work has been done on "lock-free" data structures, which avoid locks by using atomic memory operations directly. These give fairly dramatic performance improvements, particularly on systems with a few (2 to 4) cores. The .NET 4 concurrent collections in System.Collections.Concurrent are mostly lock-free. However, lock-free data structures still don't scale indefinitely, because any use of an atomic memory operation still involves every core in the system. A sync-free data structure Some concurrent data structures are possible to write in a completely synchronization-free way, without using any atomic memory operations. One useful example is a single producer, single consumer (SPSC) queue. It's easy to write a sync-free fixed size SPSC queue using a circular buffer*. Slightly trickier is a queue that grows as needed. You can use a linked list to represent the queue, but if you leave the nodes to be garbage collected once you're done with them, the GC will need to involve all the cores in collecting the finished nodes. Instead, I've implemented a proof of concept inspired by this intel article which reuses the nodes by putting them in a second queue to send back to the producer. * In all these cases, you need to use memory barriers correctly, but these are local to a core, so don't have the same scalability problems as atomic memory operations. Performance tests I tried benchmarking my SPSC queue against the .NET ConcurrentQueue, and against a standard Queue protected by locks. In some ways, this isn't a fair comparison, because both of these support multiple producers and multiple consumers, but I'll come to that later. I started on my dual-core laptop, running a simple test that had one thread producing 64 bit integers, and another consuming them, to measure the pure overhead of the queue. So, nothing very interesting here. Both concurrent collections perform better than the lock-based one as expected, but there's not a lot to choose between the ConcurrentQueue and my SPSC queue. I was a little disappointed, but then, the .NET Framework team spent a lot longer optimising it than I did. So I dug out a more powerful machine that Red Gate's DBA tools team had been using for testing. It is a 6 core Intel i7 machine with hyperthreading, adding up to 12 logical cores. Now the results get more interesting. As I increased the number of producer-consumer pairs to 6 (to saturate all 12 logical cores), the locking approach was slow, and got even slower, as you'd expect. What I didn't expect to be so clear was the drop-off in performance of the lock-free ConcurrentQueue. I could see the machine only using about 20% of available CPU cycles when it should have been saturated. My interpretation is that as all the cores used atomic memory operations to safely access the queue, they ended up spending most of the time notifying each other about cache lines that need invalidating. The sync-free approach scaled perfectly, despite still working via shared memory, which after all, should still be a bottleneck. I can't quite believe that the results are so clear, so if you can think of any other effects that might cause them, please comment! Obviously, this benchmark isn't realistic because we're only measuring the overhead of the queue. Any real workload, even on a machine with 12 cores, would dwarf the overhead, and there'd be no point worrying about this effect. But would that be true on a machine with 100 cores? Still to be solved. The trouble is, you can't build many concurrent algorithms using only an SPSC queue to communicate. In particular, I can't see a way to build something as general purpose as actors on top of just SPSC queues. Fundamentally, an actor needs to be able to receive messages from multiple other actors, which seems to need an MPSC queue. I've been thinking about ways to build a sync-free MPSC queue out of multiple SPSC queues and some kind of sign-up mechanism. Hopefully I'll have something to tell you about soon, but leave a comment if you have any ideas.

  Read the article

• Doing unit and integration tests with the Web API HttpClient

  - by cibrax

  One of the nice things about the new HttpClient in System.Net.Http is the support for mocking responses or handling requests in a http server hosted in-memory. While the first option is useful for scenarios in which we want to test our client code in isolation (unit tests for example), the second one enables more complete integration testing scenarios that could include some more components in the stack such as model binders or message handlers for example.   The HttpClient can receive a HttpMessageHandler as argument in one of its constructors. public class HttpClient : HttpMessageInvoker { public HttpClient(); public HttpClient(HttpMessageHandler handler); public HttpClient(HttpMessageHandler handler, bool disposeHandler); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } For the first scenario, you can create a new HttpMessageHandler that fakes the response, which you can use in your unit test. The only requirement is that you somehow inject an HttpClient with this custom handler in the client code. public class FakeHttpMessageHandler : HttpMessageHandler { HttpResponseMessage response; public FakeHttpMessageHandler(HttpResponseMessage response) { this.response = response; } protected override Task<HttpResponseMessage> SendAsync(HttpRequestMessage request, System.Threading.CancellationToken cancellationToken) { var tcs = new TaskCompletionSource<HttpResponseMessage>(); tcs.SetResult(response); return tcs.Task; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } In an unit test, you can do something like this. var fakeResponse = new HttpResponse(); var fakeHandler = new FakeHttpMessageHandler(fakeResponse); var httpClient = new HttpClient(fakeHandler); var customerService = new CustomerService(httpClient); // Do something // Asserts .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } CustomerService in this case is the class under test, and the one that receives an HttpClient initialized with our fake handler. For the second scenario in integration tests, there is a In-Memory host “System.Web.Http.HttpServer” that also derives from HttpMessageHandler and you can use with a HttpClient instance in your test. This has been discussed already in these two great posts from Pedro and Filip. 

  Read the article

• ASP.NET WebAPI Security 2: Identity Architecture

  - by Your DisplayName here!

  Pedro has beaten me to the punch with a detailed post (and diagram) about the WebAPI hosting architecture. So go read his post first, then come back so we can have a closer look at what that means for security. The first important takeaway is that WebAPI is hosting independent-  currently it ships with two host integration implementations – one for ASP.NET (aka web host) and WCF (aka self host). Pedro nicely shows the integration into the web host. Self hosting is not done yet so we will mainly focus on the web hosting case and I will point out security related differences when they exist. The interesting part for security (amongst other things of course) is the HttpControllerHandler (see Pedro’s diagram) – this is where the host specific representation of an HTTP request gets converted to the WebAPI abstraction (called HttpRequestMessage). The ConvertRequest method does the following: Create a new HttpRequestMessage. Copy URI, method and headers from the HttpContext. Copies HttpContext.User to the Properties<string, object> dictionary on the HttpRequestMessage. The key used for that can be found on HttpPropertyKeys.UserPrincipalKey (which resolves to “MS_UserPrincipal”). So the consequence is that WebAPI receives whatever IPrincipal has been set by the ASP.NET pipeline (in the web hosting case). Common questions are: Are there situations where is property does not get set? Not in ASP.NET – the DefaultAuthenticationModule in the HTTP pipeline makes sure HttpContext.User (and Thread.CurrentPrincipal – more on that later) are always set. Either to some authenticated user – or to an anonymous principal. This may be different in other hosting environments (again more on that later). Why so generic? Keep in mind that WebAPI is hosting independent and may run on a host that materializes identity completely different compared to ASP.NET (or .NET in general). This gives them a way to evolve the system in the future. How does WebAPI code retrieve the current client identity? HttpRequestMessage has an extension method called GetUserPrincipal() which returns the property as an IPrincipal. A quick look at self hosting shows that the moral equivalent of HttpControllerHandler.ConvertRequest() is HttpSelfHostServer.ProcessRequestContext(). Here the principal property gets only set when the host is configured for Windows authentication (inconsisteny). Do I like that? Well – yes and no. Here are my thoughts: I like that it is very straightforward to let WebAPI inherit the client identity context of the host. This might not always be what you want – think of an ASP.NET app that consists of UI and APIs – the UI might use Forms authentication, the APIs token based authentication. So it would be good if the two parts would live in a separate security world. It makes total sense to have this generic hand off point for identity between the host and WebAPI. It also makes total sense for WebAPI plumbing code (especially handlers) to use the WebAPI specific identity abstraction. But – c’mon we are running on .NET. And the way .NET represents identity is via IPrincipal/IIdentity. That’s what every .NET developer on this planet is used to. So I would like to see a User property of type IPrincipal on ApiController. I don’t like the fact that Thread.CurrentPrincipal is not populated. T.CP is a well established pattern as a one stop shop to retrieve client identity on .NET.  That makes a lot of sense – even if the name is misleading at best. There might be existing library code you want to call from WebAPI that makes use of T.CP (e.g. PrincipalPermission, or a simple .Name or .IsInRole()). Having the client identity as an ambient property is useful for code that does not have access to the current HTTP request (for calling GetUserPrincipal()). I don’t like the fact that that the client identity conversion from host to WebAPI is inconsistent. This makes writing security plumbing code harder. I think the logic should always be: If the host has a client identity representation, copy it. If not, set an anonymous principal on the request message. Btw – please don’t annoy me with the “but T.CP is static, and static is bad for testing” chant. T.CP is a getter/setter and, in fact I find it beneficial to be able to set different security contexts in unit tests before calling in some logic. And, in case you have wondered – T.CP is indeed thread static (and the name comes from a time where a logical operation was bound to a thread – which is not true anymore). But all thread creation APIs in .NET actually copy T.CP to the new thread they create. This is the case since .NET 2.0 and is certainly an improvement compared to how Win32 does things. So to sum it up: The host plumbing copies the host client identity to WebAPI (this is not perfect yet, but will surely be improved). or in other words: The current WebAPI bits don’t ship with any authentication plumbing, but solely use whatever authentication (and thus client identity) is set up by the host. WebAPI developers can retrieve the client identity from the HttpRequestMessage. Hopefully my proposed changes around T.CP and the User property on ApiController will be added. In the next post, I will detail how to add WebAPI specific authentication support, e.g. for Basic Authentication and tokens. This includes integrating the notion of claims based identity. After that we will look at the built-in authorization bits and how to improve them as well. Stay tuned.

  Read the article

• Autoscaling in a modern world&hellip;. Part 2

  - by Steve Loethen

  When we last left off, we had a web application spinning away in the cloud, and a local console application watching it and reacting to changes in demand.  Reactions that were specified by a set of rules.  Let’s talk about those rules. Constraints.  The first set of rules this application answered to were the constraints. Here is what they looked like: <constraintRules> <rule name="default" enabled="true" rank="1" description="The default constraint rule"> <actions> <range min="1" max="4" target="AutoscalingApplicationRole"/> </actions> </rule> </constraintRules> Pretty basic.  We have one role, the “AutoscalingApplicationRole”, and we have decided to have it live within a range of 1 to 4.  This rule does not adjust, but instead, set’s limits on what other rules can do.  It has a rank, so you can have you can specify other sets of constraints, perhaps based on time or date, to allow for deviations from this set.  But for now, let’s keep it simple.  In the real world, you would probably use the minimum to set a lower end SLA.  A common value might be a 2, to prevent the reactive rules from ever taking you down to 1 role.  The maximum is often used to keep a rule from driving the cost up, setting an upper limit to prevent you waking up one morning and find a bill for hundreds of instances you didn’t expect.  So, here we have the range we want our application to live inside.  This is good for our investigation and testing.  Next, let’s take a look at the reactive rules.  These rules are what you use to react (hence reactive rules) to changing demands on your application.  The HOL has two simple rules.  One that looks at a queue depth, and one that looks at a performance counter that reports cpu utilization.  the XML in the rules file looks like this: <reactiveRules> <rule name="ScaleUp" rank="10" description="Scale Up the web role" enabled="true"> <when> <any> <greaterOrEqual operand="Length_05_holqueue" than="10"/> <greaterOrEqual operand="CPU_05_holwebrole" than="65"/> </any> </when> <actions> <scale target="AutoscalingApplicationRole" by="1"/> </actions> </rule> <rule name="ScaleDown" rank="10" description="Scale down the web role" enabled="true"> <when> <all> <less operand="Length_05_holqueue" than="5"/> <less operand="CPU_05_holwebrole" than="40"/> </all> </when> <actions> <scale target="AutoscalingApplicationRole" by="-1"/> </actions> </rule> </reactiveRules> <operands> <performanceCounter alias="CPU_05_holwebrole" performanceCounterName="\Processor(_Total)\% Processor Time" source="AutoscalingApplicationRole" timespan="00:05:00" aggregate="Average" /> <queueLength alias="Length_05_holqueue" queue="hol-queue" timespan="00:05:00" aggregate="Average"/> </operands> These rules are currently contained in a file called rules.xml, that is in the root of the console application.  The console app, starts up, grabs the rules and starts watching the 2 operands.  When it detects a rule has been satisfied, it performs the desired action.  (here, scale up or down my 1). But I want to host the autoscaler  in the cloud.  For my first trick, I will move the rules (and another file called services.xml) to azure blob storage.  Look for part 3.

  Read the article

• Oracle Delivers Latest Release of Oracle Enterprise Manager 12c

  - by Scott McNeil

  Richer Service Catalog for Database and Middleware as a Service; Enhanced Database and Middleware Management Help Drive Enterprise-Scale Private Cloud Adoption News Summary IT organizations are adopting private clouds as a stepping-stone to business-driven, self-service IT. Successful implementations hinge on the ability to efficiently deploy and manage cloud services at enterprise scale. Having a complete cloud management solution integrated with an enterprise-class technology stack is a fundamental requirement for IT. Oracle Enterprise Manager 12c Release 4 meets that requirement by helping businesses become more agile and responsive, while reducing cost, complexity, and risk. News Facts Oracle Enterprise Manager 12c Release 4, available today, lets organizations rapidly adopt Oracle-based, enterprise-scale private clouds. New capabilities provide advanced technology stack management, secure database administration, and enterprise service governance, enabling Oracle customers and partners to maximize database and application performance and drive innovation using self-service IT platforms. The enhancements have been driven by customers and the growing Oracle Enterprise Manager Ecosystem, comprised of more than 750 Oracle PartnerNetwork (OPN) Specialized partners. Oracle and its partners and customers have built over 140 plug-ins and connectors for Oracle Enterprise Manager. Watch the video highlights. Automation for Broader Cloud Services Oracle Enterprise Manager 12c Release 4 allows for a rapid enterprise-wide adoption of database, middleware and infrastructure services in the private cloud, driven by an enhanced API-enabled service catalog. The release features “push button” style provisioning of complete environments such as SOA and Oracle Active Data Guard, and fast data cloning that enables rapid deployment and testing of enterprise applications. Out-of-the-box capabilities to detect data and configuration vulnerabilities provide enhanced cloud service governance along with greater operational control through a flexible and extensible showback mechanism. Enhanced Database Management A new performance warehouse enables predictive database diagnostics and trend analysis and helps identify database problems before they occur. New enterprise data-governance capabilities enhance security by helping systematically discover and protect sensitive data. Step-by-step orchestration of upgrades with the ability to rollback changes enables faster adoption of Oracle Database 12c. Expanded Fusion Middleware Management A new consolidated view of Oracle Fusion Middleware 12c deployments with a guided management capability lets administrators apply best management practices to diverse middleware environments and identify performance issues quickly. A Java VM Diagnostics as a Service feature allows governed access to diagnostics data for IT workers across multiple disciplines for accelerated DevOps resolutions of defects and performance optimization. New automated provisioning for SOA lets middleware administrators perform mass SOA provisioning with ease. Superior Enterprise-Grade Management Private roles and preferred credentials have been added to Oracle Enterprise Manager to provide additional fine-grained security for organizations with complex access control requirements. A new security console provides a single point of control for managing the security of Oracle Enterprise Manager environments. Support for the latest industry standard SNMP v3 protocol, including encryption, enables more secure heterogeneous management. “Smart monitoring” adapts to observed environmental changes and adds self-management capabilities to help Oracle Enterprise Manager run at peak performance, while demanding less IT supervision. Supporting Quotes “Lawrence Livermore National Laboratory has a strong tradition of technology breakthroughs and leadership. As a member of Oracle’s Customer Advisory Board for Oracle Enterprise Manager, we have consistently provided feedback and guidance in the areas of enterprise-scale cloud, self-diagnosability, and secure administration for the product,” said Tim Frazier, CIO, NIF and Photon Sciences, Lawrence Livermore National Laboratory. “We intend to take advantage of the Release 4 features that support enterprise-scale availability and fine-grained security capabilities for private cloud deployments.” “IDC's most recent CloudTrack survey shows that most enterprises plan to adopt hybrid cloud architectures over the next three years,” said Mary Johnston Turner, Research Vice President, Enterprise System Management Software, IDC. “These organizations plan to deploy a wide range of workloads into cloud environments including mission critical database and middleware services that require high levels of fault tolerance and disaster recovery. Such capabilities were traditionally custom configured for each application but cloud offers the possibility to incorporate such properties within the service definition, enabling organizations to adopt cloud without compromise. With the latest release of Oracle Enterprise Manager 12c, Oracle is providing customers with an out-of-the-box experience for delivering highly-resilient cloud services for databases and applications.” “Since its inception, Oracle has been leading the way in innovative, scalable and high performance solutions for the enterprise. With this release of Oracle Enterprise Manager, we are extending this leadership by providing enterprise-scale capabilities for planning, delivering, and managing private clouds. We call this ‘zero-to-cloud – accelerated.’ These enhancements help our customers to expedite their adoption of cloud computing and prepares them for the next generation of self-service IT,” said Prakash Ramamurthy, senior vice president of Systems and Cloud Management at Oracle. Supporting Resources Oracle Enterprise Manager 12c Video: Cerner Delivers High Performance Private Cloud Video: BIAS Achieves Outstanding Results with Private Cloud Press Release Stay Connected: Twitter | Facebook | YouTube | Linkedin | Newsletter Download the Oracle Enterprise Manager 12c Mobile app

  Read the article

• Driver error when using multiple shaders

  - by Jinxi

  I'm using 3 different shaders: a tessellation shader to use the tessellation feature of DirectX11 :) a regular shader to show how it would look without tessellation and a text shader to display debug-info such as FPS, model count etc. All of these shaders are initialized at the beginning. Using the keyboard, I can switch between the tessellation shader and regular shader to render the scene. Additionally, I also want to be able toggle the display of debug-info using the text shader. Since implementing the tessellation shader the text shader doesn't work anymore. When I activate the DebugText (rendered using the text-shader) my screens go black for a while, and Windows displays the following message: Display Driver stopped responding and has recovered This happens with either of the two shaders used to render the scene. Additionally: I can start the application using the regular shader to render the scene and then switch to the tessellation shader. If I try to switch back to the regular shader I get the same error as with the text shader. What am I doing wrong when switching between shaders? What am I doing wrong when displaying text at the same time? What file can I post to help you help me? :) thx P.S. I already checked if my keyinputs interrupt at the wrong time (during render or so..), but that seems to be ok Testing Procedure Regular Shader without text shader Add text shader to Regular Shader by keyinput (works now, I built the text shader back to only vertex and pixel shader) (somthing with the z buffer is stil wrong...) Remove text shader, then change shader to Tessellation Shader by key input Then if I add the Text Shader or switch back to the Regular Shader Switching/Render Shader Here the code snipet from the Renderer.cpp where I choose the Shader according to the boolean "m_useTessellationShader": if(m_useTessellationShader) { // Render the model using the tesselation shader ecResult = m_ShaderManager->renderTessellationShader(m_D3D->getDeviceContext(), meshes[lod_level]->getIndexCount(), worldMatrix, viewMatrix, projectionMatrix, textures, texturecount, m_Light->getDirection(), m_Light->getAmbientColor(), m_Light->getDiffuseColor(), (D3DXVECTOR3)m_Camera->getPosition(), TESSELLATION_AMOUNT); } else { // todo: loaded model depends on distance to camera // Render the model using the light shader. ecResult = m_ShaderManager->renderShader(m_D3D->getDeviceContext(), meshes[lod_level]->getIndexCount(), lod_level, textures, texturecount, m_Light->getDirection(), m_Light->getAmbientColor(), m_Light->getDiffuseColor(), worldMatrix, viewMatrix, projectionMatrix); } And here the code snipet from the Mesh.cpp where I choose the Typology according to the boolean "useTessellationShader": // RenderBuffers is called from the Render function. The purpose of this function is to set the vertex buffer and index buffer as active on the input assembler in the GPU. Once the GPU has an active vertex buffer it can then use the shader to render that buffer. void Mesh::renderBuffers(ID3D11DeviceContext* deviceContext, bool useTessellationShader) { unsigned int stride; unsigned int offset; // Set vertex buffer stride and offset. stride = sizeof(VertexType); offset = 0; // Set the vertex buffer to active in the input assembler so it can be rendered. deviceContext->IASetVertexBuffers(0, 1, &m_vertexBuffer, &stride, &offset); // Set the index buffer to active in the input assembler so it can be rendered. deviceContext->IASetIndexBuffer(m_indexBuffer, DXGI_FORMAT_R32_UINT, 0); // Check which Shader is used to set the appropriate Topology // Set the type of primitive that should be rendered from this vertex buffer, in this case triangles. if(useTessellationShader) { deviceContext->IASetPrimitiveTopology(D3D11_PRIMITIVE_TOPOLOGY_3_CONTROL_POINT_PATCHLIST); }else{ deviceContext->IASetPrimitiveTopology(D3D11_PRIMITIVE_TOPOLOGY_TRIANGLELIST); } return; } RenderShader Could there be a problem using sometimes only vertex and pixel shader and after switching using vertex, hull, domain and pixel shader? Here a little overview of my architecture: TextClass: uses font.vs and font.ps deviceContext-VSSetShader(m_vertexShader, NULL, 0); deviceContext-PSSetShader(m_pixelShader, NULL, 0); deviceContext-PSSetSamplers(0, 1, &m_sampleState); RegularShader: uses vertex.vs and pixel.ps deviceContext-VSSetShader(m_vertexShader, NULL, 0); deviceContext-PSSetShader(m_pixelShader, NULL, 0); deviceContext-PSSetSamplers(0, 1, &m_sampleState); TessellationShader: uses tessellation.vs, tessellation.hs, tessellation.ds, tessellation.ps deviceContext-VSSetShader(m_vertexShader, NULL, 0); deviceContext-HSSetShader(m_hullShader, NULL, 0); deviceContext-DSSetShader(m_domainShader, NULL, 0); deviceContext-PSSetShader(m_pixelShader, NULL, 0); deviceContext-PSSetSamplers(0, 1, &m_sampleState); ClearState I'd like to switch between 2 shaders and it seems they have different context parameters, right? In clearstate methode it says it resets following params to NULL: I found following in my Direct3D Class: depth-stencil state - m_deviceContext-OMSetDepthStencilState rasterizer state - m_deviceContext-RSSetState(m_rasterState); blend state - m_device-CreateBlendState viewports - m_deviceContext-RSSetViewports(1, &viewport); I found following in every Shader Class: input/output resource slots - deviceContext-PSSetShaderResources shaders - deviceContext-VSSetShader to - deviceContext-PSSetShader input layouts - device-CreateInputLayout sampler state - device-CreateSamplerState These two I didn't understand, where can I find them? predications - ? scissor rectangles - ? Do I need to store them all localy so I can switch between them, because it doesn't feel right to reinitialize the Direct3d and the Shaders by every switch (key input)?!

  Read the article

• The illusion of Competence

  - by tony_lombardo

  Working as a contractor opened my eyes to the developer food chain.  Even though I had similar experiences earlier in my career, the challenges seemed much more vivid this time through.  I thought I’d share a couple of experiences with you, and the lessons that can be taken from them. Lesson 1: Beware of the “funnel” guy.  The funnel guy is the one who wants you to funnel all thoughts, ideas and code changes through him.  He may say it’s because he wants to avoid conflicts in source control, but the real reason is likely that he wants to hide your contributions.  Here’s an example.  When I finally got access to the code on one of my projects, I was told by the developer that I had to funnel all of my changes through him.  There were 4 of us coding on the project, but only 2 of us working on the UI.  The other 2 were working on a separate application, but part of the overall project.  So I figured, I’ll check it into SVN, he reviews and accepts then merges in.  Not even close.  I didn’t even have checkin rights to SVN, I had to email my changes to the developer so he could check those changes in.  Lesson 2: If you point out flaws in code to someone supposedly ‘higher’ than you in the developer chain, they’re going to get defensive.  My first task on this project was to review the code, familiarize myself with it.  So of course, that’s what I did.  And in familiarizing myself with it, I saw so many bad practices and code smells that I immediately started coming up with solutions to fix it.  Of course, when I reviewed these changes with the developer (guy who originally wrote the code), he smiled and nodded and said, we can’t make those changes now, it’s too destabilizing.  I recommended we create a new branch and start working on refactoring, but branching was a new concept for this guy and he was worried we would somehow break SVN. How about some concrete examples? I started out by recommending we remove NUnit dependency and tests from the application project, and create a separate Unit testing project.  This was met with a little bit of resistance because - “How do I access the private methods?”  As it turned out there weren’t really any private methods that weren’t exposed by public methods, so I quickly calmed this fear. Win 1 Loss 0 Next, I recommended that all of the File IO access be wrapped in Using clauses, or at least properly wrapped in try catch finally.  This recommendation was accepted.. but never implemented. Win 2  Loss 1 Next recommendation was to refactor the command pattern implementation.  The command pattern was implemented, but it wasn’t really necessary for the application.  More over, the fact that we had 100 different command classes, each with it’s own specific command parameters class, made maintenance a huge hassle.  The same code repeated over and over and over.  This recommendation was declined, the code was too fragile and this change would destabilize it.  I couldn’t disagree, though it was the commands themselves in many cases that were fragile. Win 2 Loss 2 Next recommendation was to aid performance (and responsiveness) of the application by using asynchronous service calls.  This on was accepted. Win 2 Loss 3 If you’re paying any attention, you’re wondering why the async service calls was scored as a loss.. Let me explain.  The service call was made using the async pattern.  Followed by a thread.sleep  <facepalm>. Now it’s easy to be harsh on this kind of code, especially if you’re an experienced developer.  But I understood how most of this happened.  One junior guy, working as hard as he can to build his first real world application, with little or no guidance from anyone else.  He had his pattern book and theory of programming to help him, but no real world experience.  He didn’t know how difficult it would be to trace the crashes to the coding issues above, but he will one day.  The part that amazed me was the management position that “this guy should be a team lead, because he’s worked so hard”.  I’m all for rewarding hard work, but when you reward someone by promoting them past the point of their competence, you’re setting yourself and them up for failure.  And that’s lesson 3.  Just because you’ve got a hard worker, doesn’t mean he should be leading a development project.  If you’re a junior guy busting your ass, keep at it.  I encourage you to try new things, but most importantly to learn from your mistakes.  And correct your mistakes.  And if someone else looks at your code and shows you a laundry list of things that should be done differently, don’t take it personally – they’re really trying to help you.  And if you’re a senior guy, working with a junior guy, it’s your duty to point out the flaws in the code.  Even if it does make you the bad guy.  And while I’ve used “guy” above, I mean both men and women.  And in some cases mutant dinosaurs. 

  Read the article

• Backup Your Windows Home Server Off-Site with Asus Webstorage

  - by Mysticgeek

  Windows Home Server lets you backup machines on your network easily. But what about backing up the server data? Today we take a look at ASUS WebStorage for Windows Home Server, which provides you with secure off-site backup for WHS. To use the ASUS WebStorage service you’ll need to sign up for a free account. It offers 1GB of free storage, then you can purchase an unlimited backup package for $39.99 for a year subscription. Note: They also offer online storage for individual PCs as well. Install ASUS WebStorage for WHS Browse to your shared folders on the server and open the Add-Ins folder and copy over the WHSConnectorSetup2.2.4.088.msi file (link below) then close out of the folder. Now launch Windows Home Server Console from one of the computers on your network, click Settings, then Add-ins. Under Available Add-ins click the Available tab and you’ll see the Asus WebStorage installer file we just copied over. Click the Install button. Installation kicks off and when it’s complete, you’ll need to close out of the console and reconnect. Using ASUS WebStorage WHS Connector  When you reconnect to WHS Console, scroll over to the ASUS WebStorage icon and click on Settings. Now log into your ASUS account… Now select the folders you want to backup to the WebStorage service. Select the radio button next to Enable to initialize the backup process… The backup process begins. You can change which folders are backed up simply by disabling the backup process, uncheck the folder(s), then enable the backup again. ASUS WebStorage Site After you have files backed up to the ASUS site, log into your account, and your presented with an overview of the amount of storage you’re using. It also shows what type of files are taking certain amounts of space.   You can browse through your backed up files and folders. It allows you to share and sync backed up data as well. Navigate to the file you want and you can easily download it by clicking on it, or share it out by clicking the share link below it. If you choose to share it, you’re provided with a link to the file to send out to other users.   Conclusion Users of Windows Home Server have been looking for an inexpensive cloud backup solution for quite some time. There are services such as JungleDisk, KeepVault, Wuala…etc. These services probably do a better job, but can start getting expensive once you start uploading a GBs of data. Another disappointment of ASUS WebStorage is you can only backup your WHS shares (from what we’ve been able to determine), it’s an “all or nothing” type of thing. You cannot go in and select individual files and folders. The initial upload speeds can be a bit slow as well, although that might have something to do with limited upload speeds on the DSL connection we used to test it. Retrieving your data from the ASUS site is a breeze though, and all the data files are organized quite well. The WHS Addin is very easy to install and use. If you’re looking for an off-site solution to backup your WHS data, you can test out ASUS WebStorage for free with a 1GB limit. This is good for testing the service and it might be exactly what you’re looking for. Other users may want a more advanced solution like KeepVault or CloudBerry…which is a front end for Amazon S3 storage. Download ASUS WebStorage WHS Addin Other WHS Offsite Backup Solutions CloudBerry, JungleDisk, KeepVault, Wuala Similar Articles Productive Geek Tips Restore Files from Backups on Windows Home ServerGMedia Blog: Setting Up a Windows Home ServerCreate A Windows Home Server Home Computer Restore DiscRemove a Network Computer from Windows Home ServerShare Ubuntu Home Directories using Samba TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow

  Read the article

• Video games, content strategy, and failure - oh my.

  - by Roger Hart

  Last night was the CS London group's event Content Strategy, Manhattan Style. Yes, it's a terrible title, feeling like a self-conscious grasp for chic, sadly commensurate with the venue. Fortunately, this was not commensurate with the event itself, which was lively, relevant, and engaging. Although mostly if you're a consultant. This is a strong strain in current content strategy discourse, and I think we're going to see it remedied quite soon. Not least in Paris on Friday. A lot of the bloggers, speakers, and commentators in the sphere are consultants, or part of agencies and other consulting organisations. A lot of the talk is about how you sell content strategy to your clients. This is completely acceptable. Of course it is. And it's actually useful if that's something you regularly have to do. To an extent, it's even portable to those of us who have to sell content strategy within an organisation. We're still competing for credibility and resource. What we're doing less is living in the beginning of a project. This was touched on by Jeffrey MacIntyre (albeit in a your-clients kind of a way) who described "the day two problem". Companies, he suggested, build websites for launch day, and forget about the need for them to be ongoing entities. Consultants, agencies, or even internal folks on short projects will live through Day Two quite often: the trainwreck moment where somebody realises that even if the content is right (which it often isn't), and on time (which it often isn't), it'll be redundant, outdated, or inaccurate by the end of the week/month/fickle social media attention cycle. The thing about living through a lot of Day Two is that you see a lot of failure. Nothing succeeds like failure? Failure is good. When it's structured right, it's an awesome tool for learning - that's kind of how video games work. I'm chewing over a whole blog post about this, but basically in game-like learning, you try, fail, go round the loop again. Success eventually yields joy. It's a relatively well-known phenomenon. It works best when that failing step is acutely felt, but extremely inexpensive. Dying in Portal is highly frustrating and surprisingly characterful, but the save-points are well designed and the reload unintrusive. The barrier to re-entry into the loop is very low, as is the cost of your failure out in meatspace. So it's easy (and fun) to learn. Yeah, spot the difference with business failure. As an external content strategist, you get to rock up with a big old folder full of other companies' Day Two (and ongoing day two hundred) failures. You can't send the client round the learning loop - although you may well be there because they've been round it once - but you can show other people's round trip. It's not as compelling, but it's not bad. What about internal content strategists? We can still point to things that are wrong, and there are some very compelling tools at our disposal - content inventories, user testing, and analytics, for instance. But if we're picking up big organically sprawling legacy content, Day Two may well be a distant memory, and the felt experience of web content failure is unlikely to be immediate to many people in the organisation. What to do? My hunch here is that the first task is to create something immediate and felt, but that it probably needs to be a success. Something quickly doable and visible - a content problem solved with a measurable business result. Now, that's a tall order; but scrape of the "quickly" and it's the whole reason we're here. At Red Gate, I've started with the text book fear and passion introduction to content strategy. In fact, I just typo'd that as "contempt strategy", and it isn't a bad description. Yelling "look at this, our website is rubbish!" gets you the initial attention, but it doesn't make you many friends. And if you don't produce something pretty sharp-ish, it's easy to lose the momentum you built up for change. The first thing I've done - after the visual content inventory - is to delete a bunch of stuff. About 70% of the SQL Compare web content has gone, in fact. This is a really, really cheap operation. It's visible, and it's powerful. It's cheap because you don't have to create any new content. It's not free, however, because you do have to validate your deletions. This means analytics, actually reading that content, and talking to people whose business purposes that content has to serve. If nobody outside the company uses it, and nobody inside the company thinks they ought to, that's a no-brainer for the delete list. The payoff here is twofold. There's the nebulous hard-to-illustrate "bad content does user experience and brand damage" argument; and there's the "nobody has to spend time (money) maintaining this now" argument. One or both are easily felt, and the second at least should be measurable. But that's just one approach, and I'd be interested to hear from any other internal content strategy folks about how they get buy-in, maintain momentum, and generally get things done.

  Read the article

• Keep it Professional &ndash; Multiple Environments

  - by AjarnMark

  I have certainly been reading blogs a whole lot more than writing them the last several weeks, and it’s about time I got back to writing.  I have been collecting several topics and references for blog posts…some of which will probably just never get written as the timeliness of the topics fade over time.  Nonetheless, I’m back, and I think it is time to revive my Doing Business Right series, this time coming from the slant of managing a development team rather than the previous angle of being self-employed.  First up: separating Dev, Test, and Prod. A few months ago, Colin Stasiuk (@BenchmarkIT) wrote a great post about separating your Dev, Test/UAT, and Prod environments.  This post covers all the important points such as removing Developer access from both PROD and UAT, and the importance of proper deployment (a.k.a. promotion) procedures.  I won’t repeat it all here, go read the original!  But what I do want to address is what I believe to be the #1 excuse people use for not having separate environments:  Money.  I discussed this briefly in my comment on Colin’s post at the time, but let me repeat it here and expand on it a bit. Don’t let the size of your company or the size of its budget dictate whether you do things professionally or not.  I am convinced that most developers and development teams would agree that it is a best practice to have separate environments for development, testing, and production (a.k.a. Live).  So why don’t they?  Because they think that it means separate servers which means more money.  While having separate physical servers for the different environments would be ideal, it is not an absolute requirement in order to make this work.  Here are a few ideas: Use multiple instances of SQL Server and multiple Web Sites with Headers or Ports.  For no additional fees* you can install multiple instances of SQL Server on the same machine.  This gives you a nice separation, allowing you to even use the same database names as will appear in PROD, yet isolating the data and security access.  And in IIS, you can create multiple Web Sites on the same server just by using Host Headers or different port numbers to separate them.  This approach does still pose the risk of non-Prod environments impacting performance on Prod, but when your application is busy enough for that to be a concern, you can probably afford one of the other options. Use desktop PCs instead of servers.  Instead of investing in full server-grade hardware, you can mimic the separate environments on old desktop PCs and at least get functional equivalency, if not performance matching.  The last I checked, Microsoft did not require separate licensing for SQL Server if that installation was used exclusively for dev or test purposes*.  There may be some version or performance differences between this approach and what you have in Prod, but you have isolated test from impacting Prod resources this way. Virtualization.  This is of course one of the hot topics of the day, and I would be remiss if I did not suggest this.  It is quite easy these days to setup virtual machines so that, again, your environments are fairly isolated from one another, and you retain all the security and procedural benefits of having separate environments. So the point is, keep your high professional standards intact.  You don’t need to compromise on using proper procedure just because you work in a small company with a small budget.  Keep doing things the right way! By the way, where I work, our DEV environment is not on a server.  All development is done on the developer’s individual workstation where it can be isolated from other developers’ work for the duration of writing the code, but also where the developers have to reconcile (merge) differences in code under concurrent development.  This usually means that each change is executed multiple times (once per developer to update their environments with the latest changes from others) giving us an extra, informal. test deployment before even going to the Test/UAT server.  It also means that if the network goes down, the developers can continue to hum along because they are not dependent on networked resources.  In fact, they will likely be even more productive because they aren’t being interrupted by email…but that’s another post I need to write. * I am not a lawyer, nor a licensing specialist, but it appeared to be so the last time I checked.  When in doubt, consult an expert on the topic.

  Read the article

• BIP and Mapviewer Mash Up I

  - by Tim Dexter

  I was out in Yellowstone last week soaking up various wildlife and a bit too much rain ... good to be back until the 95F heat yesterday. Taking a little break from the Excel templates; the dev folks are planing an Excel patch in the next week or so that will add a mass of new functionality. At the risk of completely mis leading you I'm going to hang back a while. What I have written so far holds true and will continue to do so. This week, I have been mostly eating 'mapviewer' ... answers on a post card please, TV show and character. I had a request to show how BIP can call mapviewer and render a dynamic map in an output. So I hit the books and colleagues for some answers. Mapviewer is Oracle's geographic information system, hereby known as GIS. I use it a lot in our BIEE demos where the interaction with the maps is very impressive. Need a map of California and its congressional districts? I have contacts; Jerry and David with their little black box of maps. Once in my possession I can build highly interactive, clickable maps that allow the user to drill into more information using a very friendly interface driving BIEE content and navigation. But what about maps in BIP output? Bryan Wise, who has written some articles on this blog did some work a while back with the PL/SQL API interface. The extract for the report called a function that in turn called the mapviewer server, passing a set of mapping requirements, it then returned a URL to a cached copy of that map. Easy to then have BIP render that image. Thats still very doable. You need to install a couple of packages and then load the mapviewer java APIs into the database. Then you can write your function to the APIs. A little involved? Maybe, but the database is doing all the heavy lifting for you. I thought I would investigate another method for getting the maps back into BIP. There is a URL interface you can call, this involves building an XML message to be passed to the mapviewer server. It's pretty straightforward to use on the mapviewer side. On the BIP side things are little more tricksy. After some unexpected messing about I finally got the ubiquitous Hello World map to render using the URL method. Not the most exciting map in the world, lots of ocean and a rather long URL to get it to render. http://127.0.0.1:9704/mapviewer/omserver?xml_request=%3Cmap_request%20title=%22Hello%20World%22%20datasource=%22cagis%22%20format=%22GIF_STREAM%22/%3E Notice all of the encoding in the URL string to handle the spaces, quotes, etc. All necessary to get BIP to make the call to the mapviewer server correctly without truncating the URL if it hits a real space rather than a %20. With that in mind constructing the URL was pretty simple. I'm not going to get into the content of the URL too much, for that you need to bone up on the mapviewer XML API. Check out the home page here and the documentation here. To make the template portable I used the standard CURRENT_SERVER_URL parameter from the BIP server and declared that in my template. <?param@begin:CURRENT_SERVER_URL;'myserver'?> Ignore the 'myserver', that was just a dummy value for testing at runtime it will resolve to: 'http://yourserver:port/xmlpserver' Not quite what we need as mapviewer has its own server path, in my case I needed 'mapviewer/omserver?xml_request=' as the fixed path to the mapviewer request URL. A little concatenation and substringing later I came up with <?param@begin:mURL;concat(substring($CURRENT_SERVER_URL,1,22),'mapviewer/omserver?xml_request=')?> Thats the basic URL that I can then build on. To get the Hello World map I need to add the following: <map_request title="Hello World" datasource="cagis" format="GIF_STREAM"/> Those angle brackets were the source of my headache, BIPs XSLT engine was attempting to process them rather than just pass them. Hok Min to the rescue ... again. I owe him lunch when I get out to HQ again! To solve the problem, I needed to escape all the characters and white space and then use native XSL to assign the string to a parameter. <xsl:param xdofo:ctx="begin"name="pXML">%3Cmap_request%20title=%22Hello%20World%22 %20datasource=%22cagis%22%20format=%22GIF_STREAM%22/%3E</xsl:param> I did not need to assign it to a parameter but I felt that if I were going to do anything more serious than Hello World like plotting points of interest on the map. I would need to dynamically build the URL, so using a set of parameters or variables that I then concatenated would be easier. Now I had the initial server string and the request all I then did was combine the two using a concat: concat($mURL,$pXML) Embedding that into an image tag: <fo:external-graphic src="url({concat($mURL,$pXML)})"/> and I was done. Notice the curly braces to get the concat evaluated prior to the image call. As you will see next time, building the XML message to go onto the URL can get quite complex but I have used it with some data. Ultimately, it would be easier to build an extension to BIP to handle the data to be plotted, it would then build the XML message, call mapviewer and return a URL to the map image for BIP to render. More on that next time ...

  Read the article

• Great event : Microsoft Visual Studio 2010 Launch @ Microsoft TechEd Blore

  - by sathya

  Great event : Microsoft Visual Studio 2010 Launch @ Microsoft TechEd Blore   I was really excited on attending the day 1 of Microsoft TechEd 2010 in Bangalore. This is the first Teched that am attending. The event was really fun filled with lot of knowledge sharing sessions and lots of goodies and gifts by the partners Initially the Event Started by Murthy's Session. He explained about the Developers relating to the 5 elements of nature (Pancha Boothaas) 1. Fire - Passion 2. Wave (Water) - Catch the right wave which we need to apply. 3. Earth - Connections and lots of opportunities around the world 4. Air -  Its whatever we breathe. Developers.. Without them nothing is possible. they are like the air 5. Sky - Cloud based applications   Next the Keynote and the announcement of Visual Studio by SomaSegar. List of things that he delivered his speech on : 1. Announcement of Visual Studio 2010 2. Announcement of .NET 4.0 3. Announcement of Silverlight later this week 4. What is the current Trend? Microsoft has done a research with many developers across the globe and have got the following feedback from the users. Get Lost (interrupted) - When we do some work and somebody is calling or interrepting by someother way we lose track of what we were doing and we need to do from the start Falling Behind- Technology gets updated  phenomenally over a period of time and developers always have a scenario like they are not in the state of the art technology and they always have a doubt whether they are staying updated. Lack of Collobaration - When a Manager asks a person what the team members have done and some might be done and some might not be and finally all are into a state like we dont know where we are. So they have addressed these 3 points in the VS 2010 by the following features : Get Lost - Some cool features which could overcome this. We have some Graphical interface. which could show what we have done and where we are. Some Zoom features in the code level. Falling Behind - Everything is based on .NET language base. 2010 has been built in such a way that if developers know the native language that's enough for building good applications. Lack of Collobaration - Some Dashboard Features which would show where exactly the project is. And a graphical user interface is shown on clicking which it directly drills down even to the code level. 5. An overview on all new features in VS 2010. 6. Some good demos of new features in VS 2010 by Polita and one more girl. Some of the new features included : 1. Team Explorer 2. Zoom in Code 3. Ribbon Development 4. Development in Single Platform for Windows Phone, XBox, Zune, Azure, Web Based and Windows based applications 5. Sequence Diagram Generation directly from code 6. Dashboards to show project status 7. Javascript and JQuery intellisense 8. Native support for JQuery 9. Packaging feature while deploying. 10. Generation of different versions of web.config like Web.Config.Production, Web.Config.Staging, etc. 11. IntelliTrace - Eliminating the "Not Reproducible" statement. 12. Automated User Interface Testing. At last in the closing of the day we had a great event called Demo Extravaganza, where lot of cool projects that were launched by Microsoft and also the projects that are under research were also shown. I got a lot of info about Bing today. BING really rocks!!! It has the following : 1. Visual Search 2. Product based search. For each product different menu filters were provided to make an advanced search 3. BING Maps was awesome!! It zoomed in to the street level and we can assume that we are the persons who are walking or running on the road and we can see the real objects like buildings moving by our side. 4. PhotoSynth was used in BING to show up all the images taken around the globe in a 3D format. 5. Formula - If we give some formula it automatically gives the value for the variable or derivation of expression Also some info about some kool touch apps which does an authentication and computation of Teched Attendee's Points that they have scored and the sessions attended. One guy won an XBOX in lucky draw as a gift. There were lot of Partner Stalls like Accenture,Intel,Citrix,MicroFocus,Telerik,infragistics,Sapient etc. Some Offers were provided for us like 50% off on Certifications, 1 free Elearning Course, etc. Stay tuned!! Wil update you on other events too..

  Read the article

• 5 minutes WIF: Make your ASP.NET application use test-STS

  - by DigiMortal

  Windows Identity Foundation (WIF) provides us with simple and dummy STS application we can use to develop our system with no actual STS in place. In this posting I will show you how to add STS support to your existing application and how to generate dummy application that plays you real STS. Word of caution! Although it is relatively easy to build your own STS using WIF tools I don’t recommend you to build it. Identity providers must be highly secure and stable in every means and this makes development of your own STS very complex task. If it is possible then use some known STS solution. I suppose you have WIF and WIF SDK installed on your development machine. If you don’t then here are the links to download pages: Windows Identity Foundation Windows Identity Foundation SDK Adding STS support to your web application Suppose you have web application and you want to externalize authentication so your application is able to detect users, send unauthenticated users to login and work in other terms exactly like it worked before. WIF tools provide you with all you need. 1. Click on your web application project and select “Add STS reference…” from context menu to start adding or updating STS settings for web application. 2. Insert your application URI in application settings window. Note that web.config file is already selected for you. I inserted URI that corresponds to my web application address under IIS Express. This URI must exist (later) because otherwise you cannot use dummy STS service. 3. Select “Create a new STS project in the current solution” and click Next button. 4. Summary screen gives you information about how your site will use STS. You can run this wizard always when you have to modify STS parameters. Click Finish. If everything goes like expected then new web site will be added to your solution and it is named as YourWebAppName_STS. Dummy STS application Image on right shows you dummy STS web site. Yes, it is created as web site project not as web application. But it still works nice and you don’t have to make there any modifications. It just works but it is dummy one. Why dummy STS? Some points about dummy STS web site: Dummy STS is not template for your own custom STS identity provider. Dummy STS is very good and simple replacement of real STS so you have more flexible development environment and you don’t have to authenticate yourself in real service. Of course, you can modify dummy STS web site to mimic some behavior of your real STS. Pages in dummy STS Dummy STS has two pages – Login.aspx and  Default.aspx. Default.aspx is the page that handles requests to STS service. Login.aspx is the page where authentication takes place. Dummy STS authenticates users using FBA. You can insert whatever username you like and dummy STS still works. You can take a look at the code behind these pages to get some idea about how this dummy service is built up. But again – this service is there to simplify your life as developer. Authenticating users using dummy STS If you are using development web server that ships with Visual Studio 2010 I suggest you to switch over to IIS or IIS Express and make some more configuration changes as described in my previous posting Making WIF local STS to work with your ASP.NET application. When you are done with these little modifications you are ready to run your application and see how authentication works. If everything is okay then you are redirected to dummy STS login page when running your web application. Adam Carter is provided as username by default. If you click on submit button you are authenticated and redirected to application page. In my case it looks like this. Conclusion As you saw it is very easy to set up your own dummy STS web site for testing purposes. You coded nothing. You just ran wizard, inserted some data, modified configuration a little bit and you were done. Later, when your application goes to production you can run again this STS configuration utility and it generates correct settings for your real STS service automatically.

  Read the article

• About Me

  - by Jeffrey West

  I’m new to blogging.  This is the second blog post that I have written, and before I go too much further I wanted the readers of my blog to know a bit more about me… Kid’s Stuff By trade, I am a programmer (or coder, developer, engineer, architect, etc).  I started programming when I was 12 years old.  When I was 7, we got our first ‘family’ computer – an Apple IIc.  It was great to play games on, and of course what else was a 7-year-old going to do with it.  I did have one problem with it, though.  When I put in my 5.25” floppy to play a game, sometimes, instead loading my game I would get a mysterious ‘]’ on the screen with a flashing cursor.  This, of course, was not my game.  Much like the standard ‘Microsoft fix’ is to reboot, back then you would take the floppy out, shake it, and restart the computer and pray for a different result. One day, I learned at school that I could topple my nemesis – the ‘]’ and flashing cursor – by typing ‘load’ and pressing enter.  Most of the time, this would load my game and then I would get to play.  Problem solved.  However, I began to wonder – what else can I make it do? When I was in 5th grade my dad got a bright idea to buy me a Tandy 1000HX.  He didn’t know what I was going to do with it, and neither did I.  Least of all, my mom wasn’t happy about buying a 5th grader a $1,000 computer.  Nonetheless, Over time, I learned how to write simple basic programs out of the back of my Math book: 10 x=5 20 y=6 30 PRINT x+y That was fun for all of about 5 minutes.  I needed more – more challenges, more things that I could make the computer do.  In order to quench this thirst my parents sent me to National Computer Camps in Connecticut.  It was one of the best experiences of my childhood, and I spent 3 weeks each summer after that learning BASIC, Pascal, Turbo C and some C++.  There weren’t many kids at the time who knew anything about computers, and lets just say my knowledge of and interest in computers didn’t score me many ‘cool’ points.  My experiences at NCC set me on the path that I find myself on now, and I am very thankful for the experience.  Real Life I have held various positions in the past at different levels within the IT layer cake.  I started out as a Software Developer for a startup in the Dallas, TX area building software for semiconductor testing statistical process control and sampling.  I was the second Java developer that was hired, and the ninth employee overall, so I got a great deal of experience developing software.  Since there weren’t that many people in the organization, I also got a lot of field experience which meant that if I screwed up the code, I got yelled at (figuratively) by both my boss AND the customer.  Fun Times!  What made it better was that I got to help run pilot programs in Taiwan, Singapore, Malaysia and Malta.  Getting yelled at in Taiwan is slightly less annoying that getting yelled at in Dallas… I spent the next 5 years at Accenture doing systems integration in the ‘SOA’ group.  I joined as a Consultant and left as a Senior Manager.  I started out writing code in WebLogic Integration and left after I wrapped up project where I led a team of 25 to develop the next generation of a digital media platform to deliver HD content in a digital format.  At Accenture, I had the pleasure of working with some truly amazing people – mentoring some and learning from many others – and on some incredible real-world IT projects.  Given my background with the BEA stack of products I was often called in to troubleshoot and tune WebLogic, ALBPM and ALSB installations and have logged many hours digging through thread dumps, running performance tests with SoapUI and decompiling Java classes we didn’t have the source for so I could see what was going on in the code. I am now a Senior Principal Product Manager at Oracle in the Application Grid practice.  The term ‘Application Grid’ refers to a collection of software and hardware products within Oracle that enables customers to build horizontally scalable systems.  This collection of products includes WebLogic, GlassFish, Coherence, Tuxedo and the JRockit/HotSpot JVMs (HotSprocket, maybe?).  Now, with the introduction of Exalogic it has grown to include hardware as well. Wrapping it up… I love technology and have a diverse background ranging from software development to HW and network architecture & tuning.  I have held certifications for being an Oracle Certified DBA, MSCE and Cisco Certified Network Professional (CCNP), among others and I have put those to great use over my career.  I am excited about programming & technology and I enjoy helping people learn and be successful.  If you are having challenges with WebLogic, BPM or Service Bus feel free to reach out to me and I’ll be happy to help as I have time. Thanks for stopping by!   --Jeff

  Read the article

• Explaining Explain Plan Notes for Auto DOP

  - by jean-pierre.dijcks

  I've recently gotten some questions around "why do I not see a parallel plan" while Auto DOP is on (I think)...? It is probably worthwhile to quickly go over some of the ways to find out what Auto DOP was thinking. In general, there is no need to go tracing sessions and look under the hood. The thing to start with is to do an explain plan on your statement and to look at the parameter settings on the system. Parameter Settings to Look At First and foremost, make sure that parallel_degree_policy = AUTO. If you have that parameter set to LIMITED you will not have queuing and we will only do the auto magic if your objects are set to default parallel (so no degree specified). Next you want to look at the value of parallel_degree_limit. It is typically set to CPU, which in default settings equates to the Default DOP of the system. If you are testing Auto DOP itself and the impact it has on performance you may want to leave it at this CPU setting. If you are running concurrent statements you may want to give this some more thoughts. See here for more information. In general, do stick with either CPU or with a specific number. For now avoid the IO setting as I've seen some mixed results with that... In 11.2.0.2 you should also check that IO Calibrate has been run. Best to simply do a: SQL> select * from V$IO_CALIBRATION_STATUS; STATUS        CALIBRATION_TIME ------------- ---------------------------------------------------------------- READY         04-JAN-11 10.04.13.104 AM You should see that your IO Calibrate is READY and therefore Auto DOP is ready. In any case, if you did not run the IO Calibrate step you will get the following note in the explain plan: Note -----    - automatic DOP: skipped because of IO calibrate statistics are missing One more note on calibrate_io, if you do not have asynchronous IO enabled you will see:  ERROR at line 1: ORA-56708: Could not find any datafiles with asynchronous i/o capability ORA-06512: at "SYS.DBMS_RMIN", line 463 ORA-06512: at "SYS.DBMS_RESOURCE_MANAGER", line 1296 ORA-06512: at line 7 While this is changed in some fixes to the calibrate procedure, you should really consider switching asynchronous IO on for your data warehouse. Explain Plan Explanation To see the notes that are shown and explained here (and the above little snippet ) you can use a simple explain plan mechanism. There should  be no need to add +parallel etc. explain plan for <statement> SELECT PLAN_TABLE_OUTPUT FROM TABLE(DBMS_XPLAN.DISPLAY()); Auto DOP The note structure displaying why Auto DOP did not work (with the exception noted above on IO Calibrate) is like this: Automatic degree of parallelism is disabled: <reason> These are the reason codes: Parameter -  parallel_degree_policy = manual which will not allow Auto DOP to kick in  Hint - One of the following hints are used NOPARALLEL, PARALLEL(1), PARALLEL(MANUAL) Outline - A SQL outline of an older version (before 11.2) is used SQL property restriction - The statement type does not allow for parallel processing Rule-based mode - Instead of the Cost Based Optimizer the system is using the RBO Recursive SQL statement - The statement type does not allow for parallel processing pq disabled/pdml disabled/pddl disabled - For some reason (alter session?) parallelism is disabled Limited mode but no parallel objects referenced - your parallel_degree_policy = LIMITED and no objects in the statement are decorated with the default PARALLEL degree. In most cases all objects have a specific degree in which case Auto DOP will honor that degree. Parallel Degree Limited When Auto DOP does it works you may see the cap you imposed with parallel_degree_limit showing up in the note section of the explain plan: Note -----    - automatic DOP: Computed Degree of Parallelism is 16 because of degree limit This is an obvious indication that your are being capped for this statement. There is one quite interesting one that happens when you are being capped at DOP = 1. First of you get a serial plan and the note changes slightly in that it does not indicate it is being capped (we hope to update the note at some point in time to be more specific). It right now looks like this: Note -----    - automatic DOP: Computed Degree of Parallelism is 1 Dynamic Sampling With 11.2.0.2 you will start seeing another interesting change in parallel plans, and since we are talking about the note section here, I figured we throw this in for good measure. If we deem the parallel (!) statement complex enough, we will enact dynamic sampling on your query. This happens as long as you did not change the default for dynamic sampling on the system. The note looks like this: Note ----- - dynamic sampling used for this statement (level=5)

  Read the article

• How to label a cuboid?

  - by usha

  Hi this is how my 3dcuboid looks, I have attached the complete code. I want to label this cuboid using different names across sides, how is this possible using opengl on android? public class MyGLRenderer implements Renderer { Context context; Cuboid rect; private float mCubeRotation; // private static float angleCube = 0; // Rotational angle in degree for cube (NEW) // private static float speedCube = -1.5f; // Rotational speed for cube (NEW) public MyGLRenderer(Context context) { rect = new Cuboid(); this.context = context; } public void onDrawFrame(GL10 gl) { // TODO Auto-generated method stub gl.glClear(GL10.GL_COLOR_BUFFER_BIT | GL10.GL_DEPTH_BUFFER_BIT); gl.glLoadIdentity(); // Reset the model-view matrix gl.glTranslatef(0.2f, 0.0f, -8.0f); // Translate right and into the screen gl.glScalef(0.8f, 0.8f, 0.8f); // Scale down (NEW) gl.glRotatef(mCubeRotation, 1.0f, 1.0f, 1.0f); // gl.glRotatef(angleCube, 1.0f, 1.0f, 1.0f); // rotate about the axis (1,1,1) (NEW) rect.draw(gl); mCubeRotation -= 0.15f; //angleCube += speedCube; } public void onSurfaceChanged(GL10 gl, int width, int height) { // TODO Auto-generated method stub if (height == 0) height = 1; // To prevent divide by zero float aspect = (float)width / height; // Set the viewport (display area) to cover the entire window gl.glViewport(0, 0, width, height); // Setup perspective projection, with aspect ratio matches viewport gl.glMatrixMode(GL10.GL_PROJECTION); // Select projection matrix gl.glLoadIdentity(); // Reset projection matrix // Use perspective projection GLU.gluPerspective(gl, 45, aspect, 0.1f, 100.f); gl.glMatrixMode(GL10.GL_MODELVIEW); // Select model-view matrix gl.glLoadIdentity(); // Reset } public void onSurfaceCreated(GL10 gl, EGLConfig config) { // TODO Auto-generated method stub gl.glClearColor(0.0f, 0.0f, 0.0f, 1.0f); // Set color's clear-value to black gl.glClearDepthf(1.0f); // Set depth's clear-value to farthest gl.glEnable(GL10.GL_DEPTH_TEST); // Enables depth-buffer for hidden surface removal gl.glDepthFunc(GL10.GL_LEQUAL); // The type of depth testing to do gl.glHint(GL10.GL_PERSPECTIVE_CORRECTION_HINT, GL10.GL_NICEST); // nice perspective view gl.glShadeModel(GL10.GL_SMOOTH); // Enable smooth shading of color gl.glDisable(GL10.GL_DITHER); // Disable dithering for better performance }} public class Cuboid{ private FloatBuffer mVertexBuffer; private FloatBuffer mColorBuffer; private ByteBuffer mIndexBuffer; private float vertices[] = { //width,height,depth -2.5f, -1.0f, -1.0f, 1.0f, -1.0f, -1.0f, 1.0f, 1.0f, -1.0f, -2.5f, 1.0f, -1.0f, -2.5f, -1.0f, 1.0f, 1.0f, -1.0f, 1.0f, 1.0f, 1.0f, 1.0f, -2.5f, 1.0f, 1.0f }; private float colors[] = { // R,G,B,A COLOR 0.0f, 1.0f, 0.0f, 1.0f, 0.0f, 1.0f, 0.0f, 1.0f, 1.0f, 0.5f, 0.0f, 1.0f, 1.0f, 0.5f, 0.0f, 1.0f, 1.0f, 0.0f, 0.0f, 1.0f, 1.0f, 0.0f, 0.0f, 1.0f, 0.0f, 0.0f, 1.0f, 1.0f, 1.0f, 0.0f, 1.0f, 1.0f }; private byte indices[] = { // VERTEX 0,1,2,3,4,5,6,7 REPRESENTATION FOR FACES 0, 4, 5, 0, 5, 1, 1, 5, 6, 1, 6, 2, 2, 6, 7, 2, 7, 3, 3, 7, 4, 3, 4, 0, 4, 7, 6, 4, 6, 5, 3, 0, 1, 3, 1, 2 }; public Cuboid() { ByteBuffer byteBuf = ByteBuffer.allocateDirect(vertices.length * 4); byteBuf.order(ByteOrder.nativeOrder()); mVertexBuffer = byteBuf.asFloatBuffer(); mVertexBuffer.put(vertices); mVertexBuffer.position(0); byteBuf = ByteBuffer.allocateDirect(colors.length * 4); byteBuf.order(ByteOrder.nativeOrder()); mColorBuffer = byteBuf.asFloatBuffer(); mColorBuffer.put(colors); mColorBuffer.position(0); mIndexBuffer = ByteBuffer.allocateDirect(indices.length); mIndexBuffer.put(indices); mIndexBuffer.position(0); } public void draw(GL10 gl) { gl.glFrontFace(GL10.GL_CW); gl.glVertexPointer(3, GL10.GL_FLOAT, 0, mVertexBuffer); gl.glColorPointer(4, GL10.GL_FLOAT, 0, mColorBuffer); gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); gl.glEnableClientState(GL10.GL_COLOR_ARRAY); gl.glDrawElements(GL10.GL_TRIANGLES, 36, GL10.GL_UNSIGNED_BYTE, mIndexBuffer); gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); gl.glDisableClientState(GL10.GL_COLOR_ARRAY); } } public class Draw3drect extends Activity { private GLSurfaceView glView; // Use GLSurfaceView // Call back when the activity is started, to initialize the view @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); glView = new GLSurfaceView(this); // Allocate a GLSurfaceView glView.setRenderer(new MyGLRenderer(this)); // Use a custom renderer this.setContentView(glView); // This activity sets to GLSurfaceView } // Call back when the activity is going into the background @Override protected void onPause() { super.onPause(); glView.onPause(); } // Call back after onPause() @Override protected void onResume() { super.onResume(); glView.onResume(); } }

  Read the article

• Extreme Optimization – Numerical Algorithm Support

  - by JoshReuben

  Function Delegates Many calculations involve the repeated evaluation of one or more user-supplied functions eg Numerical integration. The EO MathLib provides delegate types for common function signatures and the FunctionFactory class can generate new delegates from existing ones. RealFunction delegate - takes one Double parameter – can encapsulate most of the static methods of the System.Math class, as well as the classes in the Extreme.Mathematics.SpecialFunctions namespace: var sin = new RealFunction(Math.Sin); var result = sin(1); BivariateRealFunction delegate - takes two Double parameters: var atan2 = new BivariateRealFunction (Math.Atan2); var result = atan2(1, 2); TrivariateRealFunction delegate – represents a function takes three Double arguments ParameterizedRealFunction delegate - represents a function taking one Integer and one Double argument that returns a real number. The Pow method implements such a function, but the arguments need order re-arrangement: static double Power(int exponent, double x) { return ElementaryFunctions.Pow(x, exponent); } ... var power = new ParameterizedRealFunction(Power); var result = power(6, 3.2); A ComplexFunction delegate - represents a function that takes an Extreme.Mathematics.DoubleComplex argument and also returns a complex number. MultivariateRealFunction delegate - represents a function that takes an Extreme.Mathematics.LinearAlgebra.Vector argument and returns a real number. MultivariateVectorFunction delegate - represents a function that takes a Vector argument and returns a Vector. FastMultivariateVectorFunction delegate - represents a function that takes an input Vector argument and an output Matrix argument – avoiding object construction  The FunctionFactory class RealFromBivariateRealFunction and RealFromParameterizedRealFunction helper methods - transform BivariateRealFunction or a ParameterizedRealFunction into a RealFunction delegate by fixing one of the arguments, and treating this as a new function of a single argument. var tenthPower = FunctionFactory.RealFromParameterizedRealFunction(power, 10); var result = tenthPower(x); Note: There is no direct way to do this programmatically in C# - in F# you have partial value functions where you supply a subset of the arguments (as a travelling closure) that the function expects. When you omit arguments, F# generates a new function that holds onto/remembers the arguments you passed in and "waits" for the other parameters to be supplied. let sumVals x y = x + y     let sumX = sumVals 10     // Note: no 2nd param supplied.     // sumX is a new function generated from partially applied sumVals.     // ie "sumX is a partial application of sumVals." let sum = sumX 20     // Invokes sumX, passing in expected int (parameter y from original)  val sumVals : int -> int -> int val sumX : (int -> int) val sum : int = 30 RealFunctionsToVectorFunction and RealFunctionsToFastVectorFunction helper methods - combines an array of delegates returning a real number or a vector into vector or matrix functions. The resulting vector function returns a vector whose components are the function values of the delegates in the array. var funcVector = FunctionFactory.RealFunctionsToVectorFunction(     new MultivariateRealFunction(myFunc1),     new MultivariateRealFunction(myFunc2));  The IterativeAlgorithm<T> abstract base class Iterative algorithms are common in numerical computing - a method is executed repeatedly until a certain condition is reached, approximating the result of a calculation with increasing accuracy until a certain threshold is reached. If the desired accuracy is achieved, the algorithm is said to converge. This base class is derived by many classes in the Extreme.Mathematics.EquationSolvers and Extreme.Mathematics.Optimization namespaces, as well as the ManagedIterativeAlgorithm class which contains a driver method that manages the iteration process.  The ConvergenceTest abstract base class This class is used to specify algorithm Termination , convergence and results - calculates an estimate for the error, and signals termination of the algorithm when the error is below a specified tolerance. Termination Criteria - specify the success condition as the difference between some quantity and its actual value is within a certain tolerance – 2 ways: absolute error - difference between the result and the actual value. relative error is the difference between the result and the actual value relative to the size of the result. Tolerance property - specify trade-off between accuracy and execution time. The lower the tolerance, the longer it will take for the algorithm to obtain a result within that tolerance. Most algorithms in the EO NumLib have a default value of MachineConstants.SqrtEpsilon - gives slightly less than 8 digits of accuracy. ConvergenceCriterion property - specify under what condition the algorithm is assumed to converge. Using the ConvergenceCriterion enum: WithinAbsoluteTolerance / WithinRelativeTolerance / WithinAnyTolerance / NumberOfIterations Active property - selectively ignore certain convergence tests Error property - returns the estimated error after a run MaxIterations / MaxEvaluations properties - Other Termination Criteria - If the algorithm cannot achieve the desired accuracy, the algorithm still has to end – according to an absolute boundary. Status property - indicates how the algorithm terminated - the AlgorithmStatus enum values:NoResult / Busy / Converged (ended normally - The desired accuracy has been achieved) / IterationLimitExceeded / EvaluationLimitExceeded / RoundOffError / BadFunction / Divergent / ConvergedToFalseSolution. After the iteration terminates, the Status should be inspected to verify that the algorithm terminated normally. Alternatively, you can set the ThrowExceptionOnFailure to true. Result property - returns the result of the algorithm. This property contains the best available estimate, even if the desired accuracy was not obtained. IterationsNeeded / EvaluationsNeeded properties - returns the number of iterations required to obtain the result, number of function evaluations.  Concrete Types of Convergence Test classes SimpleConvergenceTest class - test if a value is close to zero or very small compared to another value. VectorConvergenceTest class - test convergence of vectors. This class has two additional properties. The Norm property specifies which norm is to be used when calculating the size of the vector - the VectorConvergenceNorm enum values: EuclidianNorm / Maximum / SumOfAbsoluteValues. The ErrorMeasure property specifies how the error is to be measured – VectorConvergenceErrorMeasure enum values: Norm / Componentwise ConvergenceTestCollection class - represent a combination of tests. The Quantifier property is a ConvergenceTestQuantifier enum that specifies how the tests in the collection are to be combined: Any / All  The AlgorithmHelper Class inherits from IterativeAlgorithm<T> and exposes two methods for convergence testing. IsValueWithinTolerance<T> method - determines whether a value is close to another value to within an algorithm's requested tolerance. IsIntervalWithinTolerance<T> method - determines whether an interval is within an algorithm's requested tolerance.

  Read the article

• High Jinks, Hi Jacks, Exceptional DBA Awards and PASS

  - by Rodney

  The countdown to PASS has counted down.  The day after tomorrow I will board a plane, like many others, on my way for the 4th year in a row to SQL PASS Summit.  The anticipation has been excruciating but luckily I have this little thing called a day job as a DBA that has kept me busy and not thinking too much about the event. Well that is not exactly true since my beautiful wife works for PASS so we get to talk about SQL from the time we wake up until late in the evening. I would not have it any other way and I feel very fortunate to be a part of this great event and to have been chosen as the Exceptional DBA Award judge also for the 4th year in a row.  This year, I will have been again tasked with presenting the award to the winner, Mr. Jeff Moden and it will be a true honor to meet him in person as I have read many of his articles on SSC and have attended his session at PASS previously.  The speech is all ready but one item remains, which will be a surprise to all who attend the party on Tuesday night in Seattle (see links below).  Let's face it, Exceptional DBAs everywhere work very hard protecting our data stores, tuning queries, mentoring, saving money, installing clusters, etc and once in a while there is time to be exceptionally non-professional and have a bit of fun. Once incident that happened this year that falls under the High Jinks category was when my network admin asked if I could Telnet into a SQL instance and see if I could make the connection through the firewall that he had just configured. I was able to establish a connection on port 1433 and it occurred to me that it would be very interesting if I could actually run T-SQL queries via a Telnet session much like you might do with an SMTP server. With that thought, I proceeded to demonstrate this could be possible by convincing my senior DBA Shawn McGehee that I was able to do so. At first he did not believe me. It shook his world view.  It was inconceivable.  What I had done, behind the scenes, of course, was to copy and rename SQLCMD.exe to Telnet.exe and used it to connect and run a simple, "Select * from sys.databases" on the SQL instance. I think if it had been anyone other than Shawn I could have extended this ruse indefinitely but he caught on within 30 seconds. It was a fun thirty seconds though. On the High Jacks side of the house, which is really merged to be SQL HACKS, I finally, after several years of struggling with how to connect to an untrusted domain like in a DMZ with a windows account in SSMS, I stumbled upon a solution that does away with the requirement to use SQL Authentication.  While "Runas" is a great command to use to run an application with a higher privileged account, I had not previously been able to figure out how to connect to the remote domain with SSMS and "Runsas". It never connected and caused a login failure every time for the remote windows domain account. Then I ran across an option for "Runas",   "/netonly".  This option postpones the login until a connection is made and only then passes the remote login you supply when you first launch SSMS with the "Runas" command. So a typical shortcut would look like: "C:\Windows\System32\runas.exe /netonly /user:remotedomain.com\rodlandrum "C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\Ssms.exe" You will want to make sure the passwords are synced between the two domains, your local domain and the remote domain, otherwise you may have account lockout issues, but I have found in weeks of testing this is a stable solution. Now it is time to get ready to head for Seattle. Please, if you see me (@SQLBeat) or my wife (@Karlakay22) please run up and high five me (wait..High Jinks.High Jacks.High Fives.Need to change the title) or give me a big bear hug if you are strong enough to lift me off the ground. And if you do actually do that, I will think you are awesome and will not embarrass you by crying out for help or complaining of a broken back or sciatic nerve damage. And now the links to others who have all of the details. First, for the MVP Deep Dives 2, of which, like John, I was lucky enough to be able to participate in this year. http://www.simple-talk.com/community/blogs/johnm/archive/2011/09/29/103577.aspx And the details of the SSC party where the Exceptional DBA of 2011, Jeff Moden, will be awarded. http://www.simple-talk.com/community/blogs/rebecca_amos/archive/2011/10/05/103661.aspx   Cheers! Rodney

  Read the article

• Guidance: How to layout you files for an Ideal Solution

  - by Martin Hinshelwood

  Creating a solution and having it maintainable over time is an art and not a science. I like being pedantic and having a place for everything, no matter how small. For setting up the Areas to run Multiple projects under one solution see my post on  When should I use Areas in TFS instead of Team Projects and for an explanation of branching see Guidance: A Branching strategy for Scrum Teams. Update 17th May 2010 – We are currently trialling running a single Sprint branch to improve our history. Whenever I setup a new Team Project I implement the basic version control structure. I put “readme.txt” files in the folder structure explaining the different levels, and a solution file called “[Client].[Product].sln” located at “$/[Client]/[Product]/DEV/Main” within version control. Developers should add any projects you need to create to that solution in the format “[Client].[Product].[ProductArea].[Assembly]” and they will automatically be picked up and built automatically when you setup Automated Builds using Team Foundation Build. All test projects need to be done using MSTest to get proper IDE and Team Foundation Build integration out-of-the-box and be named for the assembly that it is testing with a naming convention of “[Client].[Product].[ProductArea].[Assembly].Tests” Here is a description of the folder layout; this content should be replicated in readme files under version control in the relevant locations so that even developers new to the project can see how to do it. Figure: The Team Project level - at this level there should be a folder for each the products that you are building if you are using Areas correctly in TFS 2010. You should try very hard to avoided spaces as these things always end up in a URL eventually e.g. "Code Auditor" should be "CodeAuditor". Figure: Product Level - At this level there should be only 3 folders (DEV, RELESE and SAFE) all of which should be in capitals. These folders represent the three stages of your application production line. Each of them may contain multiple branches but this format leaves all of your branches at the same level. Figure: The DEV folder is where all of the Development branches reside. The DEV folder will contain the "Main" branch and all feature branches is they are being used. The DEV designation specifies that all code in every branch under this folder has not been released or made ready for release. And feature branches MUST merge (Forward Integrate) from Main and stabilise prior to merging (Reverse Integration) back down into Main and being decommissioned. Figure: In the Feature branching scenario only merges are allowed onto Main, no development can be done there. Once we have a mature product it is important that new features being developed in parallel are kept separate. This would most likely be used if we had more than one Scrum team working on a single product. Figure: when we are ready to do a release of our software we will create a release branch that is then stabilised prior to deployment. This protects the serviceability of of our released code allowing developers to fix bugs and re-release an existing version. Figure: All bugs found on a release are fixed on the release.  All bugs found in a release are fixed on the release and a new deployment is created. After the deployment is created the bug fixes are then merged (Reverse Integration) into the Main branch. We do this so that we separate out our development from our production ready code.  Figure: SAFE or RTM is a read only record of what you actually released. Labels are not immutable so are useless in this circumstance.  When we have completed stabilisation of the release branch and we are ready to deploy to production we create a read-only copy of the code for reference. In some cases this could be a regulatory concern, but in most cases it protects the company building the product from legal entanglements based on what you did or did not release. Figure: This allows us to reference any particular version of our application that was ever shipped.   In addition I am an advocate of having a single solution with all the Project folders directly under the “Trunk”/”Main” folder and using the full name for the project folders.. Figure: The ideal solution If you must have multiple solutions, because you need to use more than one version of Visual Studio, name the solutions “[Client].[Product][VSVersion].sln” and have it reside in the same folder as the other solution. This makes it easier for Automated build and improves the discoverability of your code and its dependencies. Send me your feedback!   Technorati Tags: VS ALM,VSTS Developing,VS 2010,VS 2008,TFS 2010,TFS 2008,TFBS

  Read the article

• Row Count Plus Transformation

  As the name suggests we have taken the current Row Count Transform that is provided by Microsoft in the Integration Services toolbox and we have recreated the functionality and extended upon it. There are two things about the current version that we thought could do with cleaning up Lack of a custom UI You have to type the variable name yourself In the Row Count Plus Transformation we solve these issues for you. Another thing we thought was missing is the ability to calculate the time taken between components in the pipeline. An example usage would be that you want to know how many rows flowed between Component A and Component B and how long it took. Again we have solved this issue. Credit must go to Erik Veerman of Solid Quality Learning for the idea behind noting the duration. We were looking at one of his packages and saw that he was doing something very similar but he was using a Script Component as a transformation. Our philosophy is that if you have to write or Copy and Paste the same piece of code more than once then you should be thinking about a custom component and here it is. The Row Count Plus Transformation populates variables with the values returned from; Counting the rows that have flowed through the path Returning the time in seconds between when it first saw a row come down this path and when it saw the final row. It is possible to leave both these boxes blank and the component will still work.   All input columns are passed through the transformation unaltered, you are not permitted to change or add to the inputs or outputs of this component. Optionally you can set the component to fire an event, which happens during the PostExecute phase of the execution. This can be useful to improve visibility of this information, such that it is captured in package logging, or can be used to drive workflow in the case of an error event. Properties Property Data Type Description OutputRowCountVariable String The name of the variable into which the amount of row read will be passed (Optional). OutputDurationVariable String The name of the variable into which the duration in seconds will be passed. (Optional). EventType RowCountPlusTransform.EventType The type of event to fire during post execute, included in which are the row count and duration values. RowCountPlusTransform.EventType Enumeration Name Value Description None 0 Do not fire any event. Information 1 Fire an Information event. Warning 2 Fire a Warning event. Error 3 Fire an Error event. Installation The component is provided as an MSI file which you can download and run to install it. This simply places the files on disk in the correct locations and also installs the assemblies in the Global Assembly Cache as per Microsoft’s recommendations. You may need to restart the SQL Server Integration Services service, as this caches information about what components are installed, as well as restarting any open instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. For 2005/2008 Only - Finally you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Row Count Plus Transformation in the Choose Toolbox Items window. This process has been described in detail in the related FAQ entry for How do I install a task or transform component? We recommend you follow best practice and apply the current Microsoft SQL Server Service pack to your SQL Server servers and workstations, and this component requires a minimum of SQL Server 2005 Service Pack 1. Downloads The Row Number Transformation is available for SQL Server 2005, SQL Server 2008 (includes R2) and SQL Server 2012. Please choose the version to match your SQL Server version, or you can install multiple versions and use them side by side if you have more than one version of SQL Server installed. Row Count Plus Transformation for SQL Server 2005 Row Count Plus Transformation for SQL Server 2008 Row Count Plus Transformation for SQL Server 2012 Version History SQL Server 2012 Version 3.0.0.6 - SQL Server 2012 release. Includes upgrade support for both 2005 and 2008 packages to 2012. (5 Jun 2012) SQL Server 2008 Version 2.0.0.5 - SQL Server 2008 release. (15 Oct 2008) SQL Server 2005 Version 1.1.0.43 - Bug fix for duration. For long running processes the duration second count may have been incorrect. (8 Sep 2006) Version 1.1.0.42 - SP1 Compatibility Testing. Added the ability to raise an event with the count and duration data for easier logging or workflow. (18 Jun 2006) Version 1.0.0.1 - SQL Server 2005 RTM. Made available as general public release. (20 Mar 2006) Screenshot Troubleshooting Make sure you have downloaded the version that matches your version of SQL Server. We offer separate downloads for SQL Server 2005, SQL Server 2008 and SQL Server 2012. If you get an error when you try and use the component along the lines of The component could not be added to the Data Flow task. Please verify that this component is properly installed.  ... The data flow object "Konesans ..." is not installed correctly on this computer, this usually indicates that the internal cache of SSIS components needs to be updated. This is held by the SSIS service, so you need restart the the SQL Server Integration Services service. You can do this from the Services applet in Control Panel or Administrative Tools in Windows. You can also restart the computer if you prefer. You may also need to restart any current instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. Once installation is complete you need to manually add the task to the toolbox before you will see it and to be able add it to packages - How do I install a task or transform component?

  Read the article

• Visual Studio &amp; TFS 11 &ndash; List of extensions and upgrades

  - by terje

  This post is a list of the extensions I recommend for use with Visual Studio 11. It’s coming up all the time – what to install, where are the download sites, last version, etc etc, and thus I thought it better to post it here and keep it updated. The basics are Visual Studio 11 connected to a Team Foundation Server 11. Note that we now are at Beta time, and that also many live in a side-by-side environment with Visual Studio 2010.  The side-by-side is supported by VS 11. However, if you installed a component supporting VS11 before you installed VS11, then you need to reinstall it.  The VSIX installer will understand that it is to apply those only for VS11, and will not touch – nor remove – the same for VS2010. A good example here is the Power Commands. The list is more or less in priority order. The focus is to get a setup which can be used for a complete coding experience for the whole ALM process. The list of course reflects what I use for my work , so it is by no means complete, and for some of the tools there are equally useful alternatives. Many components have not yet arrived with VS11 support.  I will add them as they arrive.  The components directly associated with Visual Studio from Microsoft should be common, see the Microsoft column. If you still need the VS2010 extensions, here they are: The extensions for VS 2010.   Components ready for VS 11, both upgrades and new ones Product Notes Latest Version License Applicable to Microsoft TFS Power Tools Beta 111 Side-by-side with TFS 2010 should work, but remove the Shell Extension from the TFS 2010 power tool first. March 2012(11.0.50321.0) Free TFS integration Yes ReSharper EAP for Beta 11 (updates very often, nearly daily) 7.0.3.261 pr. 16/3/2012 Free as EAP, Licensed later Coding & Quality No Power Commands1 Just reinstall, even if you already have it for VS2010. The reinstall will then apply it to VS 11 1.0.2.3 Free Coding Yes Visualization and Modelling SDK for beta Info here and here. Another download site and info here. Also download from MSDN Subscription site. Requires VS 11 Beta SDK 11 Free now, otherwise Part of MSDN Subscription Modeling Yes Visual Studio 11 Beta SDK Published 16.2.2012     Yes Visual Studio 11 Feedback tool1 Use this to really ease the process of sending bugs back to Microsoft. 1.1 Free as prerelase Visual Studio Yes             #1 Get via Visual Studio’s Tools | Extension Manager (or The Code Gallery). (From Adam : All these are auto updated by the Extension Manager in Visual Studio) #2 Works with ultimate only Components we wait for, not yet in a VS 11 version Product Notes Latest Version License Applicable to Microsoft       Coding Yes Inmeta Build Explorer     Free TFS integration No Build Manager Community Build Manager. Info here from Jakob   Free TFS Integration No Code Contracts Coming real soon   Free Coding & Quality Yes Code Contracts Editor Extensions     Free Coding & Quality Yes Web Std Update     Free Coding (Web) Yes (MSFT) Web Essentials     Free Coding (Web) Yes (MSFT) DotPeek It says up to .Net 4.0, but some tests indicates it seems to be able to handle 4.5. 1.0.0.7999 Free Coding/Investigation No Just Decompile Also says up to .net 4.0   Free Coding/Investigation No dotTrace     Licensed Quality No NDepend   Licensed Quality No tangible T4 editor     Lite version Free (Good enough) Coding (T4 templates) No Pex Moles are now integrated and improved in VS 11 as a new library called Fakes.     Coding & Unit Testing Yes Components which are now integrated into VS 11 Product Notes Productivity Power Tools Features integrated into VS11, with a few exceptions, I don’t think you will miss those. Fakes  Was Moles in 2010. Fakes is improved and made into a product.  NuGet Manager Included in the install, but still an extension package. Info here. Product installation, upgrades and patches for VS/TFS 11   Product Notes Date Applicable to Visual Studio 11 & TFS 11 Beta This is the beta release, and you are free to download and try it out. March 2012 Visual Studio and TFS SQL Server 2008 R2 SP1 Cumulative Update 4 The TFS 11 requires the CU1 at least, but you should go up to at least CU4, since this update solves a ghost record problem that otherwise may cause your TFS database to not release records the way it should when you clean it up, see this post for more information on that issue.  Oct 2011 SQL Server 2008 R2 SP1

  Read the article

• Telerik is First to Announce Support for Microsoft Silverlight Analytics Framework

  Yesterday at MIX 10 conference Microsoft announced the Microsoft Silverlight Analytics Framework Beta. The Silverlight Analytics Framework (SAF) is a new open-source framework to allow designers and developers to integrate web analytics into Silverlight applications in a consistent manner. Supporting out-of-browser and offline scenarios, Microsoft built this framework in conjunction with a number of web analytics services and control vendors to support multiple analytics services simultaneously without degrading application performance. Because the SAF is enabled as a set of behaviors in Microsoft Expression Blend, designers and developers can visually instrument their designs and configure A/B testing rapidly without writing any code. Telerik is proud to be the first control vendor to support the Silverlight Analytics Framework. RadControls for Silverlight can be used with the framework out of the box. The suite offers Silverlight Analytics Framework handlers and behavior, helping developers to fine tune the values sent to the analytics providers. Because the analytics framework is using the Managed Extensibility Framework (MEF) for composition, you don't need to change the way you use the controls to benefit from the Telerik handlers. Just add a reference to the Telerik assemblies that contains the handlers. Here is the code that you need to declare to use RadTreeView: <UserControl x:Class="Telerik.SLAF.MainPage"         xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"         xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"         xmlns:i="clr-namespace:System.Windows.Interactivity;assembly=System.Windows.Interactivity"         xmlns:ga="clr-namespace:Google.WebAnalytics;assembly=Google.WebAnalytics"         xmlns:sa="clr-namespace:Microsoft.WebAnalytics.Behaviors;assembly=Microsoft.WebAnalytics.Behaviors"         xmlns:ic="clr-namespace:Microsoft.Expression.Interactivity.Core;assembly=Microsoft.Expression.Interactions"         xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"         xmlns:telerikNavigation="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls.Navigation">        <Grid x:Name="LayoutRoot">         <i:Interaction.Behaviors>             <ga:GoogleAnalytics ProfileId="--Your GA ProfileId" Category="Demo" />         </i:Interaction.Behaviors>         <telerikNavigation:RadTreeView>             <i:Interaction.Triggers>                 <i:EventTrigger EventName="SelectionChanged">                     <sa:TrackAction />                 </i:EventTrigger>             </i:Interaction.Triggers>             <telerikNavigation:RadTreeViewItem Header="Item1">             </telerikNavigation:RadTreeViewItem>             <telerikNavigation:RadTreeViewItem Header="Item2" />             <telerikNavigation:RadTreeViewItem Header="Item3" />         </telerikNavigation:RadTreeView>     </Grid> </UserControl> Download the Telerik Microsoft Silverlight Analytics Framework Handlers and the sample project. This is our first Beta release - please drop us a line with any feedback you have or even better if you are at MIX10 - come visit us at the booth in the "Commons" hall so we can discuss it in person. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Where Facebook Stands Heading Into 2013

  - by Mike Stiles

  In our last blog, we looked at how Twitter is positioned heading into 2013. Now it’s time to take a similar look at Facebook. 2012, for a time at least, seemed to be the era of Facebook-bashing. Between a far-from-smooth IPO, subsequent stock price declines, and anxiety over privacy, the top social network became a target for comedians, politicians, business journalists, and of course those who were prone to Facebook-bash even in the best of times. But amidst the “this is the end of Facebook” headlines, the company kept experimenting, kept testing, kept innovating, and pressing forward, committed as always to the user experience, while concurrently addressing monetization with greater urgency. Facebook enters 2013 with over 1 billion users around the world. Usage grew 41% in Brazil, Russia, Japan, South Korea and India in 2012. In the Middle East and North Africa, an average 21 new signups happen per minute. Engagement and time spent on the site would impress the harshest of critics. Facebook, while not bulletproof, has become such an integrated daily force in users’ lives, it’s getting hard to imagine any future mass rejection. You want to see a company recognizing weaknesses and shoring them up. Mobile was a weakness in 2012 as Facebook was one of many caught by surprise at the speed of user migration to mobile. But new mobile interfaces, better mobile ads, speed upgrades, standalone Messenger and Pages mobile apps, and the big dollar acquisition of Instagram, were a few indicators Facebook won’t play catch-up any more than it has to. As a user, the cool thing about Facebook is, it knows you. The uncool thing about Facebook is, it knows you. The company’s walking a delicate line between the public’s competing desires for customized experiences and privacy. While the company’s working to make privacy options clearer and easier, Facebook’s Paul Adams says data aggregation can move from acting on what a user is engaging with at the moment to a more holistic view of what they’re likely to want at any given time. To help learn about you, there’s Open Graph. Embedded through diverse partnerships, the idea is to surface what you’re doing and what you care about, and help you discover things via your friends’ activities. Facebook’s Director of Engineering, Mike Vernal, says building mobile social apps connected to Facebook in such ways is the next wave of big innovation. Expect to see that fostered in 2013. The Facebook site experience is always evolving. Some users like that about Facebook, others can’t wait to complain about it…on Facebook. The Facebook focal point, the News Feed, is not sacred and is seeing plenty of experimentation with the insertion of modules. From upcoming concerts, events, suggested Pages you might like, to aggregated “most shared” content from social reader apps, plenty could start popping up between those pictures of what your friends had for lunch.  As for which friends’ lunches you see, that’s a function of the mythic EdgeRank…which is also tinkered with. When Facebook changed it in September, Page admins saw reach go down and the high anxiety set in quickly. Engagement, however, held steady. The adjustment was about relevancy over reach. (And oh yeah, reach was something that could be charged for). Facebook wants users to see what they’re most likely to like, based on past usage and interactions. Adding to the “cream must rise to the top” philosophy, they’re now even trying out ordering post comments based on the engagement the comments get. Boy, it’s getting competitive out there for a social engager. Facebook has to make $$$. To do that, they must offer attractive vehicles to marketers. There are a myriad of ad units. But a key Facebook marketing concept is the Sponsored Story. It’s key because it encourages content that’s good, relevant, and performs well organically. If it is, marketing dollars can amplify it and extend its reach. Brands can expect the rollout of a search product and an ad network. That’s a big deal. It takes, as Open Graph does, the power of Facebook’s user data and carries it beyond the Facebook environment into the digital world at large. No one could target like Facebook can, and some analysts think it could double their roughly $5 billion revenue stream. As every potential revenue nook and cranny is explored, there are the users themselves. In addition to Gifts, Facebook thinks users might pay a few bucks to promote their own posts so more of their friends will see them. There’s also word classifieds could be purchased in News Feeds, though they won’t be called classifieds. And that’s where Facebook stands; a wildly popular destination, a part of our culture, with ever increasing functionalities, the biggest of big data, revenue strategies that appeal to marketers without souring the user experience, new challenges as a now public company, ongoing privacy concerns, and innovations that carry Facebook far beyond its own borders. Anyone care to write a “this is the end of Facebook” headline? @mikestilesPhoto via stock.schng

  Read the article

< Previous Page | 356 357 358 359 360 361 362 363 364 365 366 367  | Next Page >