Search Results

Search found 25391 results on 1016 pages for 'update notification'.

Page 362/1016 | < Previous Page | 358 359 360 361 362 363 364 365 366 367 368 369  | Next Page >

  • Shrinking a large transaction log on a full drive

    - by Sam
    Someone fired off an update statement as part of some maintenance which did a cross join update on two tables with 200,000 records in each. That's 40 trillion statements, which would explain part of how the log grew to 200GB. I also did not have the log file capped, which is another problem I will be taking care of server wide - where we have almost 200 databases residing. The 'solution' I used was to backup the database, backup the log with truncate_only, and then backup the database again. I then shrunk the log file and set a cap on the log. Seeing as there were other databases using the log drive, I was in a bit of a rush to clean it out. I might have been able to back the log file up to our backup drive, hoping that no other databases needed to grow their log file. Paul Randal from http://technet.microsoft.com/en-us/magazine/2009.02.logging.aspx Under no circumstances should you delete the transaction log, try to rebuild it using undocumented commands, or simply truncate it using the NO_LOG or TRUNCATE_ONLY options of BACKUP LOG (which have been removed in SQL Server 2008). These options will either cause transactional inconsistency (and more than likely corruption) or remove the possibility of being able to properly recover the database. Were there any other options I'm not aware of?

    Read the article

  • diagnose "corrupt file" problems

    - by Matthew
    My computer has been crashing the last couple weeks pretty regularly (at least once a day). A lot of times things I do will display a little notification in the bottom right saying something about a corrupt file. (I'm on Windows XP Pro Service Pack 3). When the computer does crash I get the "blue screen of death" usually. Some of the notifications also advise running the chkdsk utility. I cannot get it to successfully run. Using the command prompt (or even the "tools" menu after right clicking the drive and choosing properties), it will not run the utility (it says "do you want to schedule it to run next boot time" or whatever, which I confirm). The problem is that most of the time after restarting, it doesn't run at all. The few times it does run, it has an error (I can't remember the error right now, it at least says it's ntfs and such) and says disk checking will end. How can I get it to successfully run?

    Read the article

  • install latest gcc as a non-privileged user

    - by voth
    I want to compile a program on a cluster (as a non-privileged user), which requires gcc-4.6, but the cluster has only gcc-4.1.2. I don't want to tell the administrator to update gcc, because 1) he is busy and would do it only after several days. 2) He probably wouldn't update it anyway, since other users may need the older gcc version (gcc is not backward compatible) I tried to compile gcc from source, which seems more difficult that it sounds, since it requires several other packages to be installed (GMP, MPFR, MPC, ...), and when I did it, after several hours I got a message like checking for __gmpz_init in -lgmp... no configure: error: libgmp not found or uses a different ABI (including static vs shared). at which point a got stuck. My question is: what is the easiest way to install the latest version of gcc as a non-privileged user? (something like apt-get install XXXXX, with an option to not install as root for example) The setup of the cluster is the following: CentOS release 5.4 (Final) Rocks release 5.3 (Rolled Tacos) If there are no other options than compiling from source, do you have any ideas how to handle the above error?

    Read the article

  • Where are task scheduler event files stored on Windows Server 2008?

    - by MacGyver
    I tried setting up triggers in Task Scheduler Windows Server 2008, but Microsoft needs to fix a bug that I documented on Stack Overflow. So I can't use triggers until they fix this bug. Basically the Task Scheduler doesn't trigger an event that has a Result Code of 2147942402. http://stackoverflow.com/questions/10933033/windows-server-2008-task-scheduler-trigger-xml-syntax-for-email-notification-ta In the mean time, I'd like to write a task that runs .NET code that queries the log/event files programmatically every 15 minutes and sends success/failure emails based on the events that occured for the given tasks in task scheduler. Here's where the XPath is stored for the Task Trigger XML tab (that I can't rely on): C:\Windows\System32\Tasks\ I cannot find where the events (or log files containing the event ids) of each task are stored. Does anyone know where to find these log files? The log name is "Microsoft-Windows-TaskScheduler/Operational".

    Read the article

  • AWS EC2: How to determine whether my EC2/scalr AMI was hacked? What to do to secure it?

    - by Niro
    I received notification from Amazon that my instance tried to hack another server. there was no additional information besides log dump: Original report: Destination IPs: Destination Ports: Destination URLs: Abuse Time: Sun May 16 10:13:00 UTC 2010 NTP: N Log Extract: External 184.xxx.yyy.zzz, 11.842.000 packets/300s (39.473 packets/s), 5 flows/300s (0 flows/s), 0,320 GByte/300s (8 MBit/s) (184.xxx.yyy.zzz is my instance ip) How can I tell whether someone has penetrated my instance? What are the steps I should take to make sure my instance is clean and safe to use? Is there some intrusion detection techinque or log that I can use? Any information is highly appreciated.

    Read the article

  • Windows 7 Printing Issue

    - by Adrian Godong
    I am using Windows 7 RTM x64. From Control Panel Devices and Printers, I have three printers listed; Fax, XPS Writer, and a Lexmark. I can print a test page through the printer properties with no problem. I can print a text file from Notepad with no problem. I can't print from Safari. When I press Ctrl+P, it displays the Print dialog, press OK and nothing happened. I can't print from Adobe Reader. When I press Ctrl+P, it complains that it there is no printer installed. I can't print from Office applications. When I press Ctrl+P, it crashes immediately. Running Office Diagnostics does not help. I can't print from IE8. When I press Ctrl+P, it displays the Print dialog, complains that I have to select a printer from the list, selected any of the three printers, the Print button is disabled. Any help? Update (01/11/2009): The default printer is the Lexmark. I'm testing on this one as well. I was about to reinstall Office (as this is the first application that has the problem), but then I tried other, some behave similarly but not identical (maybe caused by different printing implementation). On those applications that is able to display printer selection dialog, I tried the Lexmark and XPS. Neither printed anything (paper for Lexmark, file for XPS). Update (01/12/2009): It seems that my Windows installation is botched. A colleague have similar hardware/software combination (it's the same workstation model and Windows 7 x64) and his can print perfectly fine. I tried adding the printer from his share, no joy. I can test print from the printer property, I can print from Notepad, but not from any other application.

    Read the article

  • SSL timeout on some sites, across all browsers, on Mac OS X Snow Leopard

    - by dansays
    For the past several weeks, I've been receiving "Error 7 (net::ERR_TIMED_OUT): The operation timed out" when I attempt to connect to either Twitter or Paypal via SSL. I get this specific error in Google Chrome, but the same problem occurs in both Safari and Firefox. Other sites work fine, and other computers on my network can access these two sites. I have no firewall settings that would prevent me from accessing these sites over port 443. I notice that both Twitter and Paypal both have "Verisign Class 3 Extended Validation SSL CA" certificates. It is unclear whether this is related to the problem. In an effort to troubleshoot, I attempted to open the test sites referenced on Verisign's root certificate support page, which worked fine. Just to be sure, I downloaded and installed the root package file and installed all included Verisign certificates. No joy. I feel like I've hit a dead end. Any ideas? Update the first: I also cannot connect to FedEx.com, who also has a Verisign Class 3 Extended Validation cert. Update the second: Aaaaaaand it fixed itself. I did nothing. Or, I did something that worked, but in a delayed fashion. Frustrating, but a win is a win. I'll take it.

    Read the article

  • Concatenating ogg video files from the command line

    - by Noufal Ibrahim
    Okay. I've got a few ogg files I've created using a desktop recording tool. I've transcoded them using ffmpeg once (mainly to clip out the beginnings and the ends). Now, I have 3 such files which I want to concatenate into a single .ogv file. I tried using oggCat, it crashed with some kind of error (I tried concatenating a file to itself using oggCat and that failed too leading me to believe that my distro is shipping a broken version of the package). Simply cating the files works but I can't seek which is not cool. mencoder run like this mencoder -ovc lavc -oac lavc file1.ogv file2.ogv file3.ogv -o complete.ogv. It transcodes the files into an avi and clips off a little of the 3 videos. So, how do I do this? Update 1: My current workaround is to transcode the 3 files into .mpg using ffmpeg, then cating them together and then transcoding them back into ogv. Update 2: PiTiVi works for this kind of thing but I need something from the command line that I can automate and script.

    Read the article

  • Can Windows 7, Vista, or XP notify me after 30 minutes, or at 2:30pm?

    - by Jian Lin
    Come to think about it, since Windows 3.0, Windows 95, 2000, ME, XP, Vista, and Windows 7, does any Windows have a capability of giving a "beep beep" notification to me, let's say I need to go meet somebody after 30 minutes? Or give a "beep beep" at 2:30pm? I hope to hear some sound instead of a pop up window as I may be writing something on the desk instead of looking at the computer. I usually don't want to install 3rd party app for this purpose, as you never know what the app does or how trustworthy it is if it is not a popular app (like Firefox or Safari). Does any version of Windows come with that capability? I'd imagine it is an app that takes two days to write.

    Read the article

  • Windows 7 Bluetooth Configuration

    - by ahsteele
    I have Bluetooth installed in my laptop. The Bluetooth is enabled according to the status light. However, I do not see Bluetooth listed in device manager or have a control panel option for it. A scan for new hardware doesn't turn up Bluetooth. Nor are any devices listed with a Yellow Exclamation Point. I do have three USB Hubs Listed as "Generic USB Hub." There is no Bluetooth icon in the notification area and Bluetooth is not listed under Devices and Printers. What am I missing?

    Read the article

  • One-To-Many Powershell Scripts

    - by Matt
    I'm trying to create a script to run as a scheduled task, which will run against multiple servers and retrieve some information. To start with, I populate the list of servers by querying AD for all servers that match a certain set of criteria, using Get-ADComputer. The problem is, the list is returned as an object, which I can't then pass to the New-PSSession list. I have tried converting it to a comma-seperated string by doing the following: foreach ($server in $serverlist) {$newlist += $server.Name + ","} but this still doesn't work. the alternative is to iterate through the list and run the various commands against each server one at a time, but my preference would be to avoid this and run them using one-to-many remoting. UPDATE: To clarify what I want to end up being able to do is using -ComputerName $serverlist, so I want $serverlist to be a string rather than an object. UPDATE 2: Thanks for all the suggestions. Between them and my original method I'm starting to wonder whether -ComputerName can accept a string variable? I've got varying degrees of success getting the list of computers converted to a comma separated string, but no matter how I do it I always get invalid network address.

    Read the article

  • Thunderbird does not delete messages from the POP server

    - by Max888
    Thunderbird does not delete messages from the POP server. I am a Yahoo Plus user and I can download messages from the inbox in Thunderbird from the Yahoo POP3 server. However, I want to delete read messages directly on the email client rather than go to Yahoo mail. When I do this, emails are still on the server In accounts setting, I have the following options ticked: -Automatically download new messages -Leave messages on server, Until I delete them Thanks for any guidance Update: Thanks for the replies so far. Some clarification: I do want to keep some messages on Yahoo for filling them in my online folders, hence the reason I do not download ALL my messages to Tbird and delete server message automatically **Update 2: Cracked it!! OK, boys and girls, here is the way to do it. Go to Options- Advanced - Config Editor find the Name 'mail . pop3 . deleteFromServerOnMove' Set it to True True: Delete the copy of the message on the POP3 server if you move or delete the message. False(default): Only delete the copy of the message on the POP3 server if you delete the message. That's it, restart Thunderbird. You need to press 'Get Mail' everytime you want to sync with the email server, in order for you to make sure messages in the application is in sync with the email server.**

    Read the article

  • Error 0x80073cf9 when installing or updating apps from windows store

    - by cmorse
    On my Windows 8 desktop I keep getting error 0x80073cf9 when I try to install or update an app from the windows store. In the installings apps pane it just says "This app wasn't installed -- view details" and when I select that it says "Something happened and this app couldn't be installed. Please try again. Error code: 0x80073cf9" I am using the built-in windows firewall and antivirus. And my laptop is able to install updates when it is on the same network. This is what winstore.log shows when I try to update the maps app: 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] *********************************************************************** 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] Process name: C:\Windows\system32\taskhost.exe 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] User name: Desktop\User 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] Computer name: desktop 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] Windows build: 9200.16424.amd64fre.win8_gdr.120926-1855 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] Client version: 615 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011428] CWSTileUpdateHandler::Worker: Broker is handling badge updates. 2012-10-18 15:31:47.554, _Info_ WS [00002572:00008200] CProgressDispatcher::OnProgress: AppId = 97a2179c-38be-45a3-933e-0d2dbf14a142, PFN = Microsoft.BingMaps_8wekyb3d8bbwe, InstallPhase = 1, PhasePercent = 0, TotalPercent = 0 2012-10-18 15:31:47.558, _Warning_ WS [00002572:00008200] CDownloadProgress::IDownloadCompletedCallback::Invoke: Download complete result 0x80073cf9 for Microsoft.BingMaps_8wekyb3d8bbwe 2012-10-18 15:31:47.559, _Error_ WS [00002572:00008200] CActionItem::_DoDownload: Download failed for 97a2179c-38be-45a3-933e-0d2dbf14a142, hr=0x80073cf9 2012-10-18 15:31:47.560, _Info_ WS [00002572:00008200] CActionItem::_DoDownload: Notifying progress handlers of download failure for 97a2179c-38be-45a3-933e-0d2dbf14a142, hr=0x80073cf9 2012-10-18 15:31:47.560, _Error_ WS [00002572:00008200] CProgressDispatcher::OnError: PFN = Microsoft.BingMaps_8wekyb3d8bbwe, InstallPhase = 1, hrError = 0x80073cf9

    Read the article

  • How to turn off Excel "Header Row" without losing data in it?

    - by Ken
    I've been sent an Excel spreadsheet with a weird first row. Some of the cells say "Column1", "Column2", etc., but I can't delete their contents. If I select the cell and hit backspace, it goes blank, but when I press return, it goes right back to saying "Column1". I found another answer here that suggested this could be caused by "Cell validation", but the validation window says "Any value", and also "show alert" (and I'm not seeing an alert), so I don't think that's it. The first row is white text on a blue background, if that means anything. The spreadsheet was sent to me in XLSX format, but I tried resaving as XLS and opening that, and it seems to make no difference. This is with the "ribbon" version of Excel (they got rid of the Help menu so I don't know how to see what version number it is!). Thanks! Update: The Excel online help says to use ribbon Home tab - Cells - Delete - ... to delete cells. When I select anything on the first row, this pop-up menu is dimmed. So maybe Excel doesn't think row 1 consists of "cells"? Though I don't know what else it would call them. Update 2: I found it, kind of. If I click the "Design" tab in the ribbon, then uncheck "Header Row", then first row becomes a normal row of cells again. Unfortunately, the contents disappear entirely. I want to delete a few cells, not all 50+! And if I copy the first row before turning off "Header Row", it disappears from the clipboard when I uncheck that. So I kind of know what mode it's stuck in, but not a good way out of it.

    Read the article

  • Vista Screen resolution Changes when Switching Users

    - by Benjol
    I regularly have a problem when switching between users in Vista - the screen resolution drops down to 800x600. If I try to set the resolution back to the maximum, it says nothing, but just keeps it at 800x600. I can set it back to an intermediate value. Otherwise I have to either restart the PC, or sometimes if I log off one of the users, I can then set the resolution back to max. Might it also have something to do with using sleep mode instead of performing regular shutdowns? I thought it might be related to the desktop background image taking up too much space, but even with plain colours, the problem still occurs. There is an enormous thread on this here, but not really any answers. From what I can gather from that thread, it isn't related to any particular applications, nor limited to a particular make of graphics card or monitor, so I don't think that including hardware details is useful. This is a very annoying problem, as it screws up my desktop and screen layout every single time. Has anyone here experienced this problem or found a solution? I've noticed that Windows Update has tried to install nVidia updates and apparently they've failed on several occasions. Not sure if that is of any relevance or not. UPDATE The last post on the thread: FWIW - I had this problem for about 2 years and wrote a number of posts in this thread in the past. It survived OS reinstallation, change of practically all of my hardware piece by piece (mobo, cpu, monitor, graphics card, memory, power supply...) I used to be affected by this annoying problem at least once every 24-48 hours. About 1.5 months ago I wiped out my 32 bit vista ultimate installation and installed Windows7 ultimate 64 bit from scratch and never saw this problem again. GOOD RIDDANCE. Vista was a pathetic piece of __ that felt like a flashback to the old [horrible] NT4/Windows95 days. I was seriously considering switching over to Apple/Mac OSX if this problem persisted.

    Read the article

  • Gather Outlook/Exchange connection Status responses from script

    - by mrTomahawk
    I'm trying to figure out a way in-which I can remotely gather Outlook = Exchange Connection stats from systems. I know I can have the users Right-click their Outlook icon in the system notification area, and then choose "Connection Status", but I'd really like to be able to poll this information without having to as the user to do anything. I saw this previous post, and I believe what he did is similar to what I'm trying to do we created a VB application that would pull user PTO information from a backend system and send out status emails to each of the users on a monthly basis but I'm trying to do it to gather the connection information from all my sites for certain parts of the day. Ideally I would like to do this via some sort of VBScript code since that is what I'm most familiar with, but I can work with Powershell too. My environment is all Exchange 2003 and Outlook 2003 clients.

    Read the article

  • Why does Exchange 2003 silently reject emails with large attachments?

    - by Cypher
    Our environment: Exchange Server 2003 Standard, single instance, running on Windows Server 2003 Standard. configured to not send/receive mail with attachments larger than 10 MB. NDRs are not enabled. The issue: When an external sender sends an email with an attachment larger than 10MB, Exchange, as configured, does not receive the message. However, the sender of that message does not receive any notifications from his own mail server that the message could not be delivered due to attachment size. However, if an external user tries to send an email to a non-existent user, they do receive a message from their mail server indicating that the user does not exist. Why is that, and is there anything I can do about it? It would be nice if the sender received notification that the attachment file size exceeds our limits and their message was never received... Update The Exchange server has a SpamAssassin box in front of it... could that have something to do with it? Here is one of the last lines from SpamAssassin's logs when searching for my test e-mails: mail postfix/smtp[19133]: 2B80917758: to=, relay=10.0.0.8[10.0.0.8]:25, delay=4.3, delays=2.6/0/0/1.7, dsn=2.6.0, status=sent (250 2.6.0 Queued mail for delivery) My assumption is that Spam Assassin thinks the message is OK and is forwarding it off to Exchange. Update I've verified that Exchange is receiving the message and generating an NDR. However, delivery of NDRs are disabled to prevent Backscatter. Is there something that I can do to get Exchange to send a bounce message to the sending mail server (or verify that message is being sent) so the sending mail server can notify its sender of the bounce?

    Read the article

  • Postfix how to triggering my script when outgoing email status is sent?

    - by Laszlo Malina
    I want to run a program when postfix has successfully sent out a mail (local or remote). I would like to pass the headers to program and if possible also the destination ip or address (exclude spam filter delivery). I just have an idea: Delivery Status Notification processing via uniqe transport program, but I'd prefer the above. My goal is to be recorded lifetime (events) of email: it came, it went out (from, to, subject, datetime, message id, message status: bounce, sent). I would only need the state of the outgoing mail, because incoming and bounce program is working. It is possible to trigger a program (similar to a transport pipe/spawn) or DSN "cheat" stay? Thanks in advance for any reply!

    Read the article

  • anti-virus / malware solution for small non-profit network

    - by Jason
    I'm an IT volunteer at a local non-profit. I'm looking for a good AV/malware solution. We currently use a mishmash of different client solutions, and want to move to something centralized. There is no full time IT staff. What I'm looking for: centralized administration - server is Windows Server 2003 minimal admin overhead ability to do e-mail notification/alerts/reporting would be very cool 10-25 XP Clients (P3/P4 hardware) free or discounted solution for non-profits We can get a cheap license for Symantec Endpoint Protection. My past experience with Symantec has been bad, but I've heard good things about this product. However, I've also read that it's kind of a nightmare to setup and administer, and may not be worth it for the size of our network.

    Read the article

  • BIND returns serverfail when querying for its authoriative domain

    - by estol
    Hi there Serverfault folks! First of all: sorry about the title, I had some problem coming up with the proper title. I have a little home server set up, for internet sharing, samba, basic http, dlna mediaserver and what not, and I happend to have a domain at hand, so I thought why not direct it to this computer? I have a BIND 9.8.0 installed, and - afaik - configured it properly. For a few days, the public view did not worked, and I really did not cared, since the local view worked. But now suddenly, even the local view fails. If I try to query the nameserver for anything in my domain, it returns the following error: $ nslookup andromeda.dafaces.com ;; Got SERVFAIL reply from ::1, trying next server ;; Got SERVFAIL reply from ::1, trying next server Server: 127.0.0.1 Address: 127.0.0.1#53 ** server can't find andromeda.dafaces.com.dafaces.com: SERVFAIL Also, the public view points to the old ip address of the domain, probably because of the same error. Some information about the system: $ uname -a Linux tressis 2.6.37-ARCH #1 SMP PREEMPT Tue Mar 15 09:21:17 CET 2011 x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ AuthenticAMD GNU/Linux $ named -v BIND 9.8.0 And the named.conf file: # cat /etc/named.conf // // /etc/named.conf // include "/etc/rndc.key"; #controls { # inet 127.0.0.1 allow {localhost; } keys { "dnskulcs"; }; #}; options { directory "/var/named"; pid-file "/var/run/named/named.pid"; auth-nxdomain yes; datasize default; // Uncomment these to enable IPv6 connections support // IPv4 will still work: listen-on-v6 { any; }; listen-on { any; }; // Add this for no IPv4: // listen-on { none; }; // Default security settings. // allow-recursion { 127.0.0.1; ::1; 192.168.1.0/24; }; // allow-recursion { any; }; allow-query { any; }; allow-transfer { 127.0.0.1; ::1; 92.243.14.172; 87.98.164.164; 88.191.64.64; }; allow-update { key "dnskulcs"; }; version none; hostname none; server-id none; zone-statistics yes; forwarders { 213.46.246.53; 213.26.246.54; 8.8.8.8; 8.8.4.4; 192.188.242.65; 193.227.196.3; 2001:470:20::2; }; }; view "local" { match-clients { 192.168.1.0/24; 127.0.0.1; ::1; fec0:0:0:ffff::/64; }; recursion yes; zone "localhost" IN { type master; file "localhost.zone"; allow-transfer { any; }; }; zone "0.0.127.in-addr.arpa" IN { type master; file "127.0.0.zone"; allow-transfer { any; }; }; zone "." IN { type hint; file "root.hint"; }; zone "dafaces.com" IN { type master; file "internal/dafaces.com.fw"; allow-update { key "dnskulcs"; }; }; zone "1.168.192.in-addr.arpa" IN { type master; file "internal/dafaces.com.rev"; allow-update { key "dnskulcs"; }; }; }; view "public" { match-clients { any;}; recursion no; zone "dafaces.com" IN { type master; file "external/dafaces.com.fw"; allow-transfer { 87.98.164.164; 195.234.42.1; 88.191.64.64; }; }; }; //zone "example.org" IN { // type slave; // file "example.zone"; // masters { // 192.168.1.100; // }; // allow-query { any; }; // allow-transfer { any; }; //}; logging { channel xfer-log { file "/var/log/named.log"; print-category yes; print-severity yes; print-time yes; severity info; }; category xfer-in { xfer-log; }; category xfer-out { xfer-log; }; category notify { xfer-log; }; }; All help would be highly appreciated! EDIT: Zone files: # cat /var/named/internal/dafaces.com.fw $ORIGIN . $TTL 3600 ; 1 hour dafaces.com IN SOA tressis.dafaces.com. postmaster.dafaces.com. ( 2011032201 ; serial 28800 ; refresh (8 hours) 7200 ; retry (2 hours) 2419200 ; expire (4 weeks) 3600 ; minimum (1 hour) ) NS tressis.dafaces.com. A 192.168.1.1 MX 10 mail.dafaces.com. $ORIGIN _tcp.dafaces.com. _http SRV 0 5 80 www.dafaces.com. _ssh SRV 0 5 22 tressis.dafaces.com. $ORIGIN dafaces.com. acrisius A 192.168.1.230 andromeda A 192.168.1.7 andromeda-win7 CNAME andromeda aspasia A 192.168.1.233 athena A 192.168.1.232 callisto A 192.168.1.102 db A 192.168.1.1 management A 192.168.1.1 ; web management for the router functions haley A 192.168.1.5 hoth A 192.168.1.101 mail A 192.168.1.1 satelite A 192.168.1.20 sony-player A 192.168.1.103 TXT "310f16de2d2712dfc4ae6e5c54f60f828e" torrent A 192.168.1.1 tracker A 192.168.1.1 tressis A 192.168.1.1 www A 192.168.1.1 zeus A 192.168.1.231 and # cat /var/named/external/dafaces.com.fw $ORIGIN . $TTL 3600 dafaces.com IN SOA ns.dafaces.com. postmaster.dafaces.com. ( 2011032405; serial 28800; refresh 7200; retry 2419200; expire 3600; minimum ) NS ns.dafaces.com. NS ns0.xname.org. NS ns1.xname.org. NS ns2.xname.org. A 89.135.129.37 MX 10 mail.dafaces.com. $ORIGIN dafaces.com. ;Szolgaltatasok _ssh._tcp SRV 0 5 22 tressis _http._tcp SRV 0 5 80 www ns A 89.135.129.37 hoth A 89.135.129.37 www A 89.135.129.37 mail A 89.135.129.37 db A 89.135.129.37 torrent A 89.135.129.37 tracker A 89.135.129.37 Edit: Ohh, hell I almost forgot. Since the node is connected to the internet via a residential connection, there is a possibility, that the public ipv4 address will change(but thank god, it is a very rare case), so I daily update the external IP address in the zone file with a shellscript: # cat /etc/cron.daily/dnsupdate #!/bin/sh FILE="/var/named/external/dafaces.com.fw" SERIAL=$(date +%Y%m%d05) PUBLIC_IP=$(ifconfig internet |sed -n "/inet addr:.*255.255.255.255/{s/.*inet addr://; s/ .*//; p}") cat $FILE | sed --posix 's/^.* serial$/\t\t\t\t\t'$SERIAL'; serial/' | sed --posix 's/[0-9]*\.[0-9]*\.[0-9]*\.[0-9]*/'$PUBLIC_IP'/' > /tmp/ujzona mv /tmp/ujzona $FILE /etc/rc.d/named reload

    Read the article

  • SQL SERVER 2005 with Windows 7 Problems

    - by azamsharp
    First of all I restored the database from other server and now all the stored procedures are named as [azamsharp].[usp_getlatestposts]. I think [azamsharp] is prefixed since it was the user on the original server. Now, on my local machine this does not run. I don't want the [azamsharp] prefix with all the stored procedures. Also, when I right click on the Sproc I cannot even see the properties option. I am running the SQL SERVER 2005 on Windows 7. UPDATE: The weird thing is that if I access the production database from my machine I can see the properties option. So, there is really something wrong with Windows 7 security. UPDATE 2: When I ran the orphan users stored procedure it showed two users "azamsharp" and "dbo1". I fixed the "azamsharp" user but "dbo1" is not getting fixed. When I run the following script: exec sp_change_users_login 'update_one', 'dbo1', 'dbo1' I get the following error: Msg 15291, Level 16, State 1, Procedure sp_change_users_login, Line 131 Terminating this procedure. The Login name 'dbo1' is absent or invalid.

    Read the article

  • Windows 7 notebook turn off by itself, how to check if it is due to CPU being too hot?

    - by Jian Lin
    I have a Dell Studio 15 notebook, and it just started turning off by itself yesterday. Could it be that the CPU is too hot? I have had several notebooks before and every one of them I can put them on the bed without any problem. This Dell Studio Notebook, however, seems like have the air / fan outlet pointed outward from the bottom back of the notebook, so I suspect that the air is partially blocked when it is on the bed. Are there Win 7 tools that can monitor the CPU temperature, or will some 3rd party tool be needed? (I try to stick to official tools nowadays). Also, it is running Win 7 Ulitmate, there is actually no utility or background service from Win 7 or from Dell that detects when the temperature is too hot (or 95% near the max), pop out a message box giving a warning and say that the computer will go into sleep mode in 1 minute, but instead just turn off the computer by brute force (cutting out the power) right then and there? Update: it turned off right in front of my eyes -- it is not doing any windows update or anything. just normal use and jooooop, it turned off.

    Read the article

  • How do I stop VLC from stealing my volume buttons

    - by MGOwen
    when I press the volume buttons on my laptop, usually the system volume is changed. However, when I do this with VLC it "steals" the presses and adjusts it's own "volume" instead. The system volume is also changed. I can't find any way to turn this off in VLC. Does anyone know? Update: Sorry, some more details I should have included originally: VLC VERSION: 1.1.4 (and a few previous releases, back to about 1.1.0 or so, I think) OS: Win Vista Pro 32 HARDWARE: Dell 1720 laptop (the volume buttons are little buttons on the front of the unit, they may work something like "media" keyboard volume buttons) Update: The buttons seem to map to Ctrl+Alt+b and Ctrl+Alt+c (according to the shortcut key box in windows shortcut properties) but the VLC advanced preferences hotkeys screen doesn't list these as the keys it uses for volume. I changed it so there are no volume hotkeys in VLC settings - no luck it still steals the presses and adjusts the volume. Also, pressing Ctrl+Alt+b or c doesn't change my system volume, so who knows what windows or VLC are doing to recognise those volume buttons. :(

    Read the article

  • Dual-booting Ubuntu and Pardus with GRUB2...Pardus no show?

    - by Ibn Ali al-Turki
    I have Ubuntu 10.10 installed and used to dual-boot Fedora, but I replaced Fedora with Pardus. After the install, I went into ubuntu, and did a sudo update-grub. It detected my Pardus 2011 install there. When I rebooted, it did not show up in my grub2 menu however. I went back to Ubuntu and did it again...then checked the grub.cfg, and it is not there. I have read that Pardus uses a grub legacy. How can I get Pardus into my grub2 menu? Thanks! sudo fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd9b3496e Device Boot Start End Blocks Id System /dev/sda1 * 1 15197 122067968 83 Linux /dev/sda2 36394 60802 196059757 5 Extended /dev/sda3 15197 30394 122067968 83 Linux /dev/sda5 36394 59434 185075308 7 HPFS/NTFS /dev/sda6 59434 60802 10983424 82 Linux swap / Solaris Partition table entries are not in disk order and update-grub Found linux image: /boot/vmlinuz-2.6.35-25-generic Found initrd image: /boot/initrd.img-2.6.35-25-generic Found memtest86+ image: /boot/memtest86+.bin Found Pardus 2011 (2011) on /dev/sda3 Yet after this, I go to grub.cfg, and Pardus is not there.

    Read the article

  • Small TCP Window on WAN between 2 Locations

    - by Brent
    Site A: Denver datacenter. 60MBPS. Site B: Chicago. 100MBPS. ICMP pings: Packets: Sent = 176, Received = 176, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 74ms, Maximum = 94ms, Average = 75ms File transfer between sites that never goes past ~7MBPS: Windows Update download at 60MBPS+: Site to site: IPSec VPN using two Cisco 5520's. CPU at 3-4% and lots of memory to spare. The latency between to two sites is very acceptable so I can't see an issue why it is performing so slow when transferring between the two sites. I have found that any type of transfer (FTP, HTTP, Windows file shares) will never go above ~7MBPS. When the WAN was first setup, I was able to get transfers at 50-60MBPS, which is what is expected due to the WAN connection at the Site A at 60MBPS. Then a few days later, I was not able to get anything going faster than ~7MBPS. Is there a upstream router between Denver and Chicago causing this? I want to take the blame away from our setup as downloads from Windows Update go blazing fast and for the first few days after the site to site VPN came up, I was transferring VM images at 50-60MBPS. Our stack: HP P2000 MSA - HP C7000 Chassis - HP Flex-10 - Cisco Gigabit switch - Cisco ASA - WAN

    Read the article

< Previous Page | 358 359 360 361 362 363 364 365 366 367 368 369  | Next Page >