Search Results

Search found 16530 results on 662 pages for 'off shore'.

Page 363/662 | < Previous Page | 359 360 361 362 363 364 365 366 367 368 369 370  | Next Page >

• Networking issues with WNR3500L

  - by ageis23

  When I try connecting to my wireless network it attempts to connect then gives up. There's something strange going on with the mac's. The eternet switch and all the vlan interfaces have a mac 00:FF:FF:FF:FF:FF. config 'switch' 'eth0' option 'vlan0' '2 3 4 8*' option 'vlan1' '0 8' option 'vlan2' '1 8' config 'interface' 'loopback' option 'ifname' 'lo' option 'proto' 'static' option 'ipaddr' '127.0.0.1' option 'netmask' '255.0.0.0' config 'interface' 'lan' option 'type' 'bridge' option 'ifname' 'eth0.1' option 'proto' 'static' option 'netmask' '255.255.255.0' option 'ipaddr' '192.168.2.1' option 'ip6addr' '' option 'gateway' '192.168.1.253' option 'ip6gw' '' option 'dns' '' config 'interface' 'wan' option 'ifname' 'eth0' option 'proto' 'dhcp' option 'ipaddr' '192.168.1.8' option 'ip6addr' '' option 'netmask' '255.255.255.0' option 'gateway' '192.168.1.253' option 'ip6gw' '' option 'dns' '192.168.1.253' config 'interface' 'dmz' option 'ifname' 'eth0.2' option 'proto' 'static' option 'ipaddr' '192.168.0.1' option 'netmask' '255.255.255.0' Any help on this will be greatly appreciated! When I try setting the mac using macaddr it does nothing. It works perfectly fine when I turn the authentication off.

  Read the article

• Hibernate doesn't work in Windows 7 64bit

  - by hey

  Hibernate doesn't work in Windows 7 64bit. When I try to hibernate, it just turns off computer and when I turn on it, it doesn't resume and it just starts as 'fresh' again. I updated my drivers. What is the problem? Can you give me a hand? Thank you. Come on, please help me, I really need hibernate working, 100 of my reputation will go to you. Thanks. Edit, by the way, my model is: Inspiron N5010. After I hibernate and turn on my computer, it just show Shut down didn't shut down correctly.

  Read the article

• Very small image for rebuilds

  - by Deon

  I worked at a place last year that had a very small image for Windows XP re-builds. It was two Norton GHO files, totalling about 2-3 GB. This is how it worked: Boot into Norton Ghost Map to the network share where the images lived Apply the image to the workstation Reboot It would then load into Windows Setup Enter the Domain Admin credentials so it can join the domain That's it... it would then reboot into Windows and the image was complete. How did they make an image so small? Did they perhaps kick off a Windows install and create an image then? I particularly liked how it required no user input other than a domain admin login.

  Read the article

• How can I activate a Panel-icon via a script (or get its screen co-ordinates; to click it)?

  - by fred.bear

  This question is in the context of Lucid 10.04 desktop (ie. no Unity). I do most screen navigation via the keyboard (not the mouse), so I'm looking for a script solution to re-activating an app which has been "minimized" to the Panel's Notification Area. I'll use Skype as an example. wmctrl allows me enough access to normally-minimized windows, but when Skype is "minimized" to the Notification Area, it simply goes "off the radar" as far as wmctrl is concerned. Bearing in mind that icon positions in the Notification Area can vary, is there some way to determine the screen co-ordinates of Skype's Panel icon, so I can "click" it using xdotool (or a similar utility)? ...or maybe there is a more direct way to activate the "dormant" Skype? ... (and I don't mean the mouse ;) Here is the script, so far. Hopefully it will make clear what I'm trying to do: #!/bin/bash procname="skype-wrapper" windmask="Skype™" if [[ $(pgrep -x -n -c "$procname") == 1 ]] ; then wintitle="$(wmctrl -l |grep "$windmask" |head -n 1 |sed -n "s/^.\+${HOSTNAME} \(.*\)/\1/p")" if [ "$wintitle" = "" ] ; then echo "Click on Skype's Panel-icon to show the main window" ############################################################### # How can I find the screen co-ordinates of Skype's Panel Icon ############################################################### else # Skype is running, and has (at least) one visible window which matches $windmask. Activate it. wmctrl -a "$wintitle" fi else # The process is not currently running. Start it. ("$procname" &) fi

  Read the article

• Persistent retrying resuming downloads with curl

  - by Svish

  I'm on a mac and have a list of files I would like to download from an ftp server. The connection is a bit buggy so I want it to retry and resume if connection is dropped. I know I can do this with wget, but unfortunately Mac OS X doesn't come with wget. I could install it, but to do that (unless I have missed something) I need to install XCode and MacPorts first, which I would like to avoid. Curl is available though it seems, but I don't know how that works or how to use it really. If I have a list of files in a text file (one full path per line, like ftp://user:pass@server/dir/file1) how can I use curl to download all those files? And can I get curl to never give up? Like, retry infinitely and resume downloads where it left off and such?

  Read the article

• Windows 7 startup problem

  - by elaine

  I purchased a computer a few weeks ago which runs on Windows 7. I was just watching a show on Hulu when it shut off. I don't know if I accidently pushed the power button with the keyboard or what. When I turned it back on my first screen says F5 key for HDD recovery. I pressed the F5 button and the screen goes to a Windows setup (EMS enabled) screen which then goes to my regular Starting Windows. After that one I get the box with x:/windows/system32/cmd.exe-startnent.cmd. If I don't press the F5 button I go to a screen which tells me Windows failed to start, a recent hardware or software change might be the cause. It gives me two options- Launch Setup REpair(recommended) or start Windows normally. I've pressed enter to choose the first choice but it does nothing but brings me to the same screen. Anyone have any ideas?

  Read the article

• Internet sharing over LAN on Windows Server 2012

  - by USER

  I have a DSL modem connected to a server (ON NIC1) running Windows Server 2012 and 7 computers (running Windows 7 32-Bit) connected to a server though a network switch (ON NIC2). I shared the internet connection from the server through DHCP so I am able to access the internet from those 7 computers, but I am unable to: Access Google.com Activate Windows Update Windows An error is arising that says UNABLE TO ACTIVATE WINDOWS Activation Error Code: 0x80072EE2 Firewall and Anti-Virus are off on both the Server and the Clients. Is there is any additional setting that I want to do?

  Read the article

• Remove MySQL ibdata1 without dumping and restoring existing proper databases

  - by Halfgaar

  My MySQL server contains two 100+ GB big databases. One was created with innodb_file_per_table and one wasn't. The one that wasn't, has been dumped, ready to be reloaded. However, the ibdata1 file is still huge and I don't have enough free space. Normal advice in this situation is to dump and remove each database, stop MySQL, then remove ibdata1 and the transaction logs, and then reload the databases. My specific question is: can I leave databases that were created with innodb_file_per_table alone? Or will they be destroyed when I remove ibdata1, even though all their files are separate? I can't afford to take this database off-line to dump and reload it. And because it's already properly made with separate files per table, it would feel pretty useless.

  Read the article

• Browser Item Caching and URLs

  - by Damon Armstrong

  Ultimately you want the browser to cache things like Flash components, Silverlight XAP files, and images to avoid users having to download them each time they hit a page.  But during development it’s very useful to NOT have things cached so you are always looking at the most up-to-date file.  You can always turn off caching on your browser, but if you use your browser for daily browsing then its not the greatest option.  To avoid caching we would always just slap a randomly generated GUID to the back of the URL of any items we didn’t want to cache (e.g. http://someserver.com/images/image.png?15f073f5-45fc-47b2-993b-fbaa781b926d).  It worked well, but you had to remember to remove the random GUID when it went to production. However, on a GimmalSoft project we recently implemented someone showed me a better way that didn’t need to be removed from production code – just slap the last modified date of the file on the end of the URL (or something generated from the modification date).  This was kind of genius approach because it gives you the best of both world.  If you modify the file, the browser goes out and gets the newest version.  If you don’t modify the file, it has the cached copy.  Very helpful!  The only down side is that you do have to read the modification date from the file, which does technically take some time.

  Read the article

• Browser Item Caching and URLs

  - by Damon

  Ultimately you want the browser to cache things like Flash components, Silverlight XAP files, and images to avoid users having to download them each time they hit a page.  But during development it's very useful to NOT have things cached so you are always looking at the most up-to-date file.  You can always turn off caching on your browser, but if you use your browser for daily browsing then its not the greatest option.  To avoid caching we would always just slap a randomly generated GUID to the back of the URL of any items we didn't want to cache (e.g. http://someserver.com/images/image.png?15f073f5-45fc-47b2-993b-fbaa781b926d).  It worked well, but you had to remember to remove the random GUID when it went to production. However, on a GimmalSoft project we recently implemented someone showed me a better way that didn't need to be removed from production code - just slap the last modified date of the file on the end of the URL (or something generated from the modification date).  This was kind of genius approach because it gives you the best of both world.  If you modify the file, the browser goes out and gets the newest version.  If you don't modify the file, it has the cached copy.  Very helpful!  The only down side is that you do have to read the modification date from the file, which does technically take some time.

  Read the article

• Hard disk failure. Can I recover my "move"d folders?

  - by Doug

  I am in the process of moving all my files from an old laptop to new one. I just moved 11gb of data from my old laptop to a hard drive (external) and then upon moving it out to the new hard drive, the hard drive is getting a CRC (Data Error (Cyclic Redundancy Check). Now I am looking for a solution to recover the files that I moved on my old laptop (not the external). I understand they they are just marked for potential overwriting to free up space. I was getting ready to test out GetDataBack, but it says to install it on a healthy windows and use the recover-needed drive as an external. However, I don't want to turn off my computer without first getting the okay since it is in a "moved" state. Please help! What can I do to recover the Moved files. I haven't touched the computer since it has been moved. What can I use to recover them?

  Read the article

• SVN Checkout error on large repositories

  - by Brian Mitchell

  I wonder if anyone can help me. We have recently migrated our Subversion repository from a VisualSVN Server on Windows to a subversion server on CentOS. The migration was succesfull however we are getting the following error message Error REPORT of svn'/svn/MangoRepository/!svn/vcc/default': Could not read chunk size: Error connection was closed by server (http://servername) Now the workaround for this is simply to perform a update on the repo and it will contine where is left off. Im just wondering if anyone was a permanent fix for this as it can be quite frustrating to repeat my self to 60-70 developers.

  Read the article

• When computer turns on: keyboard/mouse/monitor don't work?

  - by dave

  the computer is barely good,at least i think..features Intel core 2 4 GB ram Nvidia Radeon 9600 512 mb Gigabite motherboad (the others i can't remember).. Used this computer for 3 years with no problem...The problem started one day after while it froze everything, then I shut down with removing the electricity power. A few hours later, I tried to log in to the computer but nothing moved. Nor keyboard nor mouse nor monitor worked, I was thinking that should be a delay so I left it some time. After a minute it turned off without my help around 30 seconds then it turned on automatically, but was the same problem like before and it goes again and again...any suggestions? If more info/specs required, let me know.

  Read the article

• How can I open a port in OS X 10.6?

  - by Ian

  Mine is MacBook Air, so I cannot plug to the modem directly. And I do want to turn my firewall off. How can I specify to open a port, like port 56789 in Mac OS 10.6.8? I know in old Mac OS, there is a option for me to specify a custom port. But I cannot find it in OS X 10.6.8. In System Preferences / Security / Firewall, I only can allow an APPLICATION to access a new port. However, now I'm programming, using a new port. So, it seems not suitable for me. So, can I simply open a port instead of using an Application to open a port?

  Read the article

• All browsers hang on windows 7 in tab says 'Waiting for...' need restart

  - by Lakshmila

  I'm having a frustrating problem with browsers on OS windows 7 home premium. IE 10: My web browsing works ok for a while and then pages freeze and tab at top says "Waiting for ...' and never loads. Strangely I can still get to Google search results but if I click anything it freezes. Chrome freezes too and says 'The page has become unresponsive ...kill page' Safari stops also. I have tried clearing cookies, cache, turning off Bitdefender firewall and nothing apart from a restart fixes it. consequently I am forced to restart my computer several times a day to stop this browser hang. I have no idea what could be causing this ..any help greatly appreciated.

  Read the article

• Iptables to lock down compromised server to a single ip

  - by ollybee

  I have a Linux server which is compromised, I can see nasty looking perl scripts executing with root privileges. I want to get some data off it before I wipe it. How can I block all inbound and outbound traffic except for my ip? It's a Centos server I assume i can do this with iptables? I'm aware a the server is rooted there is a possibility that attackers could have made changes on the server that would prevent this from working. Ill be testing to make sure and only have the server online for a couple of hours before it is nuked.

  Read the article

• How Can I Successfully Migrate Skype Data?

  - by SkypeTransfer101

  Hi all, I'm looking to create a new Skype account, but have things pick up right where they left off for my contacts. I've already transferred the Skype AppData information, but I have a slightly more advanced question. How can I make it so my contacts have the chat history from my last account? i.e. I want them to be able to open a conversation with my NEW skype account and see our last words from my OLD skype account. What do they have to do to make this possible?

  Read the article

• How to persuade C fanatics to work on my C++ open source project?

  - by paperjam

  I am launching an open-source project into a space where a lot of the development is still done Linux-kernel-style, i.e. C-language with a low-level mindset. There are multiple benefits to C++ in our space but I fear those used to working in C will be scared off. How can I make the case for the benefits of C++? Specifically, the following C++ attributes are very valuable: concept of objects and reference-counting pointers - really don't want to have to malloc(sizeof(X)) or memcpy() structs templates for specialising whole bodies of code with specific performance optimizations and for avoiding duplication of code. template metaprogramming related to the above syntactic sweetness available (e.g. operator overloading, to be used in very small doses) STL Boost libraries Many of the knee-jerk negative reactions to C++ are illfounded. Performance does not suffer: modern compilers can flatten dozens of call stack levels and avoid bloat through wide use of template specializations. Granted, when using metaprogramming and building multiple specializations of a large call tree, compile time is slower but there are ways to mitigate this. How can I sell C++?

  Read the article

• VPC on Windows 7 very slow network

  - by Shigg

  I have a Windows 2003 virtual machine which I use for website testing. I've just installed Windows 7 and am using the new version VPC (not xp mode). When I try to copy a file - I need to copy some big databases across - I get a file copy speed of about 20k per sec. Copying from one PC to another on the real network transfers files at 13mb per second. Any ideas what may be causing this? I've turned off differential network compression on win 7. The Virtual HD is on a seperate physical drive to the OS. Running Windows 7 64 bit on a dual xeon with 16gb ram and 10,000 rpm drives. Tried installing VPC 2007 but windows blocks it running saying its not compatable. Many thanks for any ideas.

  Read the article

• rdesktop remote connect windows server 2012r2, device redirection doesn't work

  - by user197677

  I use rdesktop to connect to a windows server 2012r2 from my linux box. it worked well. but it doesn't work when I redirected my local directory /home to the server. My command: rdesktop -a 24 -r disk:home=/home -u test 192.168.1.110 I could connect to the Windows server. but I cannot see the directory in my remote computer. Running net use x: \\tsclient\home' works when I connect to windows 7, but it yields this error in windows server 2012r2: system error 87 has occure the parameter is error I have no idea what to do. I have turned off the firewall and deployed the RemoteFX to enable device redirection.

  Read the article

• Our company has 100,000s+ photos, how to store and browse/find these efficiently?

  - by tobefound

  We currently store our photos in a structure like this: folder\1\10000 - 19999.JPG|ORF|TIF (10 000 files) folder\2\20000 - 29999.JPG|ORF|TIF (10 000 files) etc... They are stored on 4 different 2TB D-link NASes attached and shared on our office network (\\nas1, \\nas2, and so on...) Problems: 1) When a client (Windows only, Vista and 7) wishes to browse the let's say \\nas1\folder\1\ folder, performance is quite poor. A problem. List takes a long time to generate in explorer window. Even with icons turned off. 2) Initial access to the NAS itself is sometimes slow. Problem. SAN disks too expensive for us. Even with iSCSI interface/switch technology. I've read a lot of tech pages saying that storing 100 000+ files in one single folder shouldn't be a problem. But we don't dare go there now that we experience problems on a 10K level. All input greatly appreciated, /T

  Read the article

• Getting started with server and system adminstration

  - by sid__

  I am web developer and I have been doing a lot of server configurations and system administrative tasks lately I was wondering if someone could recommend books and tutorials that would help understand how things are done the right way. Though I mostly work with Apache and Nginx for configuring and maintaining my applications, my approach has been largely trial and error based with information off google and blogs. Could someone recommend books that explain how to get started with system administrative tasks (preferably in a tutorial fashion so that I may try and understand the workings of the system). I work mostly on Linux systems on EC2 Thanks in advance.

  Read the article

• Why won't Webmaster Tools let me set a preferred domain? (says to verify, but it should already be)

  - by Su'

  I've got a domain that I apparently forgot to set a preferred domain for, so I just tried to do it. Webmaster Tools instead popped up a little box: Part of the process of setting a preferred domain is to verify that you own http://www.example.com/. Please verify http://www.example.com/. I'm running into some problems following these instructions: As far as I can tell I already did verify sometime in the past. There's a TXT DNS record with the gibberish Google tells you to set for it that I couldn't have come up with myself. …and nothing is telling me this information is bad. So let's assume the site is somehow not actually verified. All the various methods' instructions start with "click the Manage Site button next to the site you want, and then click Verify this site." That button doesn't even exist on my screens. (It presumably goes away when you successfully verify?) Those instructions were all updated pretty recently, and the DNS one in particular just a couple weeks ago so it seems a bit unlikely they're inaccurate. I am not using Apps, and won't be, so can't try out the verification through there. Note that I also have another domain that I have not done any verification for which is showing the same behavior(no such button, being told to verify when it seems impossible etc.) so something appears to just be broken. I already have a no-www process in place server-side, so we can skip that. I'm just trying to get the box checked off in GWT. If I don't get any resolution, I'll eventually scrap the TXT record and see if the site gets un-verified(or whatever since it thinks it isn't), and see if I can just restart the process. It's not urgent so I'm just trying to figure out if I've gone blind to something or what. Did the button move?

  Read the article

• Two SSL certificates required for two Apache servers using mod_proxy to serve HTTPS?

  - by Nick

  Our application originally used a single Apache server with mod_perl installed to serve up all HTTPS requests. Due to memory issues I've added a lighter Apache installation and used ProxyPass to hand off the Perl requests to the mod_perl enabled server. We currently have an SSL certificate installed on the mod_perl server but I'm struggling to understand whether we need a certificate for both servers or only the lightweight server which is receiving the original requests. Or can a certificate be used for more than one server on a single machine? Thanks in advance for any help/pointers.

  Read the article

• Workgroup connection: You may not have permission

  - by Afiefh

  I have two Windows XP computers connected through an Ad-Hoc network, computer A creates the network and B connects to it. Both computers are on the Mshome network and have file and printer sharing enabled, and they can ping one another through the adhoc network. The result is that computer A can see computer B, but B cannot see A in the workgroup. But when A tries to access B I get a "you might not have permission to access" error telling me to contact the administrator. I tries to google the error, but most posts talk about problems connecting different versions of Windows to each other. I tried turning off the firewalls on both machines and checking if the required services are running. Nothing helped. Please excuse my ignorance on Windows networking, I haven't used Windows in around 10 years.

  Read the article

< Previous Page | 359 360 361 362 363 364 365 366 367 368 369 370  | Next Page >