Search Results

Search found 49486 results on 1980 pages for 'remote working'.

Page 363/1980 | < Previous Page | 359 360 361 362 363 364 365 366 367 368 369 370  | Next Page >

  • CentOS - mdadm raid1 drive won't mount to default location

    - by danny
    I'm running CentOS 5.5, the system, boot, swap, etc. is all on /dev/sda and I have two identical single-partition drives /dev/sdb1 /dev/sdc1 that are configured in RAID1 (using mdadm). It was working fine (configured to mount to /mnt/data in the fstab file) and I recently let yum install a couple of automatic updates without paying attention to what they were, and now it doesn't work. Raid is working fine (dmesg shows it gets loaded correctly). mdstat shows: # cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdc1[1] sdb1[0] XXXX blocks [2/2] [UU] unused devices: <none> Additionally, I can mount it anywhere other than its default directory (i.e. the following works, and I can read data off the drives). # mount /dev/md0 /mnt/data2 EXT3-fs warning: mounting fs with errors, running e2fsck is recommended But when I run the following I get: # mount -a mount: /dev/sdb1 already mounted or /mnt/data busy It says nothing is mounted when I try to umount /dev/sdb1 or umount /mnt/data, so I assume it's the second of those errors. However, lsof | grep mnt shows nothing. The weird thing is that I can save files in /mnt/data. So something is obviously mounted there, but when I try to umount it I get the error that nothing is mounted. /etc/mtab doesn't mention any of the partitions or files I am trying to work with, and fstab just has that one line I mentioned above that is supposed to mount my raid partition. Again, it was all working fine until I On Google I've found a few things about dmraid interfering with mdadm after an update, but I yum remove'd dmraid and rebooted and it didn't help. I'm really confused and need to get this working to get on with my work!

    Read the article

  • Linux RFID reader HID Device not matching driver

    - by blietaer
    Hello, I got a RFID reader (GigaTek PCR330A-00) that is meant to be recognized under linux/windows as a (Human Interface Device) keyboard/USB. I hate to say this but it is working as a charm under Win7 but not "really" under Linux. Under Debian-like distros (x/k/Ubuntu, Debian,..), or Gentoo, or... I just can't have the device working at all: the device scan well (it has its USB 5V, so it is happy/beeping/blinking) something happened in the dmesg, but no immediate screen display of the RFID Tag code as expected (and seen under win7) Support is claiming it is ok under RHEL or SLED "enterprises" distros... and I must admit I saw it working under a RHEL4... I tried stealing the driver but did not succeed having my reader working... My question is thus double: 1./ How can I hack the kernel to add support to my device (simply register PID/VID?) ? 2./ What is different at all in a "enterprise" proprietary distro? how can I re-use it? Thank you for any hint/help. Cheers,

    Read the article

  • Philips Monitor problems - vertical lines on screen

    - by asdasd
    I have an old CRT Philips Monitor 17'' and it was working well. There were problems with the electrical power and the monitor started to make some sound and a smoke was getting out of it. I quickly switched it off the power, and in the morning when the power was ok i started the monitor and it appeared to be working and it worked for a couple of minutes when i find out some smell was coming from it, and after 5 minutes the screen i was working shut down and on the monitor some vertical lines appeared - and nothing else. I thought it was the OS, so i rebooted the pc and while it was booting i realized the monitor didn't show the bios info etc, but the same vertical lines on the whole screen were on it, sometimes their color was changing and they were blinking, but no screen appeared - only those vertical lines. After a day, the monitor was ok again - i turned it on and no there were no lines, everything was working fine. The same for the next 2 days. My question is: If anyone had ever had the same problem, can you help me ? THe monitor may be ok now but i am afraid it can get back those lines again. I don't know what to do, if you know please tell me whether should i take it to the service or not. Thank you.

    Read the article

  • Enabling CURL on Ubuntu 11.10

    - by Afsheen Khosravian
    I have installed curl: sudo apt-get install curl libcurl3 libcurl3-dev php5-curl and I have updated my php.ini file to include(I also tried .so): extension=php_curl.dll To test if curl is working I created a file called testCurl.php which contains the following: <?php echo ‘<pre>’; var_dump(curl_version()); echo ‘</pre>’; ?> When I navigate to localhost/testCurl.php I get an error: HTTP Error 500 Heres a snippet from the error log: PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626+lfs/php_curl.dll' - /usr/lib/php5/20090626+lfs/php_curl.dll: cannot op$ PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626+lfs/sqlite.so' - /usr/lib/php5/20090626+lfs/sqlite.so: cannot open sha$ [Sun Dec 25 12:10:17 2011] [notice] Apache/2.2.20 (Ubuntu) PHP/5.3.6-13ubuntu3.3 with Suhosin-Patch configured -- resuming normal operations [Sun Dec 25 12:13:46 2011] [error] [client 127.0.0.1] File does not exist: /var/www/css, referer: http://localhost/ [Sun Dec 25 12:13:46 2011] [error] [client 127.0.0.1] File does not exist: /var/www/css, referer: http://localhost/ [Sun Dec 25 12:13:46 2011] [error] [client 127.0.0.1] File does not exist: /var/www/css, referer: http://localhost/ [Sun Dec 25 12:13:46 2011] [error] [client 127.0.0.1] File does not exist: /var/www/css, referer: http://localhost/` Can anyone help me to get curl working? The problem was with the original test code. I used a new test file containing this and curl is now working: <?php ## Test if cURL is working ## ## SCRIPT BY WWW.WEBUNE.COM (please do not remove)## echo '<pre>'; var_dump(curl_version()); echo '</pre>'; ?>

    Read the article

  • Munin graphing by CGI

    - by Vaughn Hawk
    I have Munin working just fine, but any time I try to do cgi graphing - it just stops graphing... no errors in the log, nothing. I've followed the instructions here: http://munin-monitoring.org/wiki/CgiHowto - and it should be working - here's my munin.conf setup, at least the parts that matter: dbdir /var/lib/munin htmldir /var/www/munin logdir /var/log/munin rundir /var/run/munin tmpldir /etc/munin/templates graph_strategy cgi cgiurl /usr/lib/cgi-bin cgiurl_graph /cgi-bin/munin-cgi-graph And then the host info yada yada - graph_strategy cgi and cgrurl are commented out in munin.conf - that's because if I uncomment them, graphing stops working. Again, I get no errors in logs, just blank images where the graphs used to be. Comment out cgi? As soon as munin html runs again, everything is back to normal. I'm running the latest version of munin and munin-node - I've tried fastcgi and regular cgi - permissions for all of the directories involved are munin:www-data - and my httpd.conf file looks like this: ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory /usr/lib/cgi-bin/> AllowOverride None SetHandler fastcgi-script Options ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> <Location /cgi-bin/munin-cgi-graph> SetHandler fastcgi-script </Location> Does anyone have any ideas? Without this working, at least from what I understand, Munin just graphs stuff, even if no one is looking at them - you add 100 servers to graph, and this starts to become a problem. Hope someone has ran into this and can help me out. Thanks!

    Read the article

  • What could cause TFTP reloaded Cisco `running-config` on 871 to fail?

    - by xtian
    Cisco CCP Write Configuration borked my 871w config while I was trying to setup port forwarding. I went through the basic steps to reconfig the router. I looked to see if I could just reset the router. Nope. I tested the 871's flash memory with fsck to see if there was hardware failure. Nope. Then I rewrote the minimal config for TFTP (which is the same for Cisco's CCP app.). Thne, I successfully uploaded a previously working running-config from Win Vista using SolarWinds TFTP Server, unfortunately the restore was not entirely successful. The old running config was saved to the 871's startup-config and I can login using console port. Some other things that are working are the hostname and welcome message but that's about it. Startup shows an error SETUP: new interface NVI0 placed in "shutdown" state after tftp. The missing light on the access point modem for ethernet link show the 871'a outside FE4 is not working. SO...what's the possible problem with reloading a previously working config (approximately 4 months with the same config) via TFTP? Is there something I can look for on the 871 to verify the config? Or on Vista to validate the config file itself before I transfer it? Or, is this there a common TFTP issue? UPDATE. I missed the instruction from Cisco's TFTP page to delete aaa lines from the config (although a video from a SuperUser user didn't make this point in his most excellent demo). There were several lines of this sort, I deleted them and uploaded again. However, they're back. I assume they're added automatically? [nope, see answer] UPDATE 2. The reload of previous settings was successful, but this error remains. I don't even know now if it was there before or not. It seems irrelevant to the question.

    Read the article

  • How do I fix Internet Explorer / Firefox differences in Oracle JD Edwards Enterprise?

    - by CT
    Our company uses Oracle's JD Edwards Enterprise to do accounting work. We have an application consultant working for us to just deal JD Edwards but he is of non-technical background so only helps in application-specific support. All of our users should use IE 7 for JDE. About 15-20% of those users have problems which cause them to not be able to use IE 7. So those problematic users use firefox. For the most part firefox works fine but there are a few issues. Some menus / options within JDE that are present in IE 7 are not present in firefox. If I could get all of our users working under IE 7, all the firefox issues would be mute points. I have cross referenced Internet Options settings from a working IE 7 user and a non-working IE 7 user. All settings seem to be mirrored. I'm not sure how to go about continuing to troubleshoot this issue. So not only answers but just suggestive ideas for attack would be appreciated. Thanks

    Read the article

  • IIS6 Sending a 404 for ".exe" files.

    - by Tracker1
    Recently a bunch of files I had setup for download via IIS6's web server stopped working. They are a number of setup files ending in ".exe" and were working prior to a few months ago. I have the file permissions set properly, and even enabled browsing in IIS to determine that the paths are indeed correct. I'm not sure if it is related, but the directories with a period stopped working as well. ex: "~/download/ApplicationName/0.9/AppName-setup-0.9.123b2.exe" When I rename the directory to say 0_9 the browsing works, but the file itself delivers a 404 message from IIS. For now, I've setup FileZilla FTP for anonymous access to these files, but would prefer to continue using IIS. I've considered creating an HTTP handler to serve the .exe files, but would really prefer a configuration solution. I just can't figure out why it isn't working, as all the settings are correct. Directory is setup for read access. "Everyone" has read permissions on the files themselves, and the directory browsing (aside from the folder "0.9" to "0_9" rename) shows the files.

    Read the article

  • Issues using gmail with google apps and external domain

    - by Jonathan Kelly
    I have recently tried to use gmail through google apps as my main email client, but I'm experiencing a few different problems. I am managing the domain (conjunktiondesign.co.uk) through 123reg.co.uk but it is hosted through fasthosts.co.uk. I transfered the domain to 123reg as fasthosts did not allow me to change the MX records myself. I followed the setup instructions step by step on google apps and changed the MX records as they told me to. My email was now working perfectly but my website was down and I was getting the following error: The dnsserver returned: No DNS records I have a friend that is using the same system as me (ie. Externally hosted domain and google apps mail) and I changed my 123reg details to the same that he had (as his was working perfectly - both email and website). I changed my name servers to point to fasthosts, rather than 123reg and I added an A record called '@' pointing to fasthosts IP address. I also created another A record called 'www' pointing to fasthosts IP address. After I did this, my website worked almost immediately but I have only realised that since changing it my email is now down. I have not received anything since Saturday. I am a web designer and would consider myself fairly tech savvy, but I have no idea about A records, CNAME's and all the things I have been messing about with! What I ultimately need is someone to help me get my email and website working at the same time, rather than one being down when the other is OK. I seem only able to get one or the other working. I have now changed the name servers back to 123reg in an attempt to get my email back as it is more important than my website at this stage. Any help is much appreciated. Thanks.

    Read the article

  • IIS 6 Windows Authentication in ASP.Net app fails

    - by Kjensen
    I am trying to install an ASP.Net app on an IIS6 webserver. The site requires the user to authenticate with windows, and this works on several other apps on the same server. In IIS I have enabled anonymous access and windows authentication. In web.config, authentication is set to: <authentication mode="Windows"/> and authorization...: <authorization> <allow roles="Users"/> <deny users="*"/> </authorization> Ie. allow all users in role "Users" and deny everybody else. This is the approach that is working with several other apps on the same server. If I run the site, I am prompted for username and password. If I remove the line: <deny users="*"/> I can access the site and everything works - but the user credentials are not passed to the site (Page.User.Identity.Name returns a blank string in ASP.Net). The site has identical (inherited) file permissions as other working sites on the server. The only difference in authentication/authorization between this site and the other working sites is, that this runs Asp.Net 4 (but there are other working asp.net 4 sites on the server as well). What am I missing here? Where should I look?

    Read the article

  • How to repair damaged repository (which has a centralized .svn directory)?

    - by Heinrich Ulbricht
    I recently upgraded my TortoiseSVN installation to version 1.7.1. This forced me to upgrade my working copy as well. The upgrade removed all (but one) of the .svn directories from all subdirectories leaving only one in the root. Now out of the blue (of course; I suspect my antivirus software) there is an error when I for example try to clean up the working copy. I am also not able to commit anything. The error message when cleaning up is: Cleanup failed to process the following paths: C:\svn Can't open file 'C:\svn.svn\pristine\73\73bcc5fa7819f84f56b81dfa0236f0aac7b7d404.svn-base': The system cannot find the file specified. I traced the error to be related to the presence of one directory within the working copy. If I rename it then everything works. When it is present I get the error. I also deleted it and checked it out again. No change, the error persists. With previous versions I could repair damages in the .svn easily: just delete the offending folder and check out again. I cannot do this anymore because now the .svn dir is centralized. What could I do to repair my working copy?

    Read the article

  • Mysql connections hanging in login state

    - by Mark Rose
    Suddenly today, I had an issue with connections to mysql hanging when connecting by IP address (e.g. mysql -h 10.1.248.20), but I could still connection using localhost fine, regardless the user. mysql> show processlist; +----+----------------------+------------------+------+---------+------+-----------------------------------------------------------------------+------------------+ | Id | User | Host | db | Command | Time | State | Info | +----+----------------------+------------------+------+---------+------+-----------------------------------------------------------------------+------------------+ | 1 | system user | | NULL | Connect | 10 | Connecting to master | NULL | | 2 | system user | | NULL | Connect | 10 | Has read all relay log; waiting for the slave I/O thread to update it | NULL | | 37 | unauthenticated user | 10.1.248.3:36694 | NULL | Connect | NULL | login | NULL | | 38 | unauthenticated user | 10.1.248.3:36695 | NULL | Connect | NULL | login | NULL | | 39 | unauthenticated user | 10.1.248.3:36696 | NULL | Connect | NULL | login | NULL | | 40 | root | localhost | NULL | Query | 0 | NULL | show processlist | +----+----------------------+------------------+------+---------+------+-----------------------------------------------------------------------+------------------+ 6 rows in set (0.00 sec) Yes, I realize replication was broken in that output above; that was after I tried restart MySQL (it was an emergency). And as suddenly as things stopped working, they started working again. DNS was working fine at the time. Replication was still working. MySQL was responsive. Does anyone have any idea what would cause MySQL logins from remote IPs to hang suddenly?

    Read the article

  • Issues connecting to HP ProCurve switches

    - by BriGuy
    We are having a very strange issue trying to connect to our infrastructure switches via SSH. When you first try connecting to them, the switches will prompt for the password - and then just sit there after it is entered. If you create a second SSH session to the switch (while letting the first one remain open and just sitting there) it will let you log right in. The switches are doing the same thing with RADIUS and local authentication. The other strange part to all of this, is that about 10 switches started doing it all at the same time. As far as actual configuration of the switches, nothing has changed. Occasionally, one switch will start working like normal, but then stop again. These are all HP ProCurve managed switches, but all different models/firmware. Some switches that are not working are using the same firmware as others that are working. UPDATE: 20130312 I am also seeing this same behavior when trying to use telnet. The first telnet session just hangs there, and the second telnet session will let me log in. Rebooting the switches seems to get them working, but I still have 5 production switches that cannot easily be rebooted because of their production roles. Is anyone aware of anything else that can be switched on/off that may reset the logon for remote management or something like that?

    Read the article

  • Global Cache CR Requested But Current Block Received

    - by Liu Maclean(???)
    ????????«MINSCN?Cache Fusion Read Consistent» ????,???????????? ??????????????????: SQL> select * from V$version; BANNER -------------------------------------------------------------------------------- Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production PL/SQL Release 11.2.0.3.0 - Production CORE 11.2.0.3.0 Production TNS for Linux: Version 11.2.0.3.0 - Production NLSRTL Version 11.2.0.3.0 - Production SQL> select count(*) from gv$instance; COUNT(*) ---------- 2 SQL> select * from global_name; GLOBAL_NAME -------------------------------------------------------------------------------- www.oracledatabase12g.com ?11gR2 2??RAC??????????status???XG,????Xcurrent block???INSTANCE 2?hold?,?????INSTANCE 1?????????,?????: SQL> select * from test; ID ---------- 1 2 SQL> select dbms_rowid.rowid_block_number(rowid),dbms_rowid.rowid_relative_fno(rowid) from test; DBMS_ROWID.ROWID_BLOCK_NUMBER(ROWID) DBMS_ROWID.ROWID_RELATIVE_FNO(ROWID) ------------------------------------ ------------------------------------ 89233 1 89233 1 SQL> alter system flush buffer_cache; System altered. INSTANCE 1 Session A: SQL> update test set id=id+1 where id=1; 1 row updated. INSTANCE 1 Session B: SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 1 0 3 1755287 SQL> oradebug setmypid; Statement processed. SQL> oradebug dump gc_elements 255; Statement processed. SQL> oradebug tracefile_name; /s01/orabase/diag/rdbms/vprod/VPROD1/trace/VPROD1_ora_19111.trc GLOBAL CACHE ELEMENT DUMP (address: 0xa4ff3080): id1: 0x15c91 id2: 0x1 pkey: OBJ#76896 block: (1/89233) lock: X rls: 0x0 acq: 0x0 latch: 3 flags: 0x20 fair: 0 recovery: 0 fpin: 'kdswh11: kdst_fetch' bscn: 0x0.146e20 bctx: (nil) write: 0 scan: 0x0 lcp: (nil) lnk: [NULL] lch: [0xa9f6a6f8,0xa9f6a6f8] seq: 32 hist: 58 145:0 118 66 144:0 192 352 197 48 121 113 424 180 58 LIST OF BUFFERS LINKED TO THIS GLOBAL CACHE ELEMENT: flg: 0x02000001 lflg: 0x1 state: XCURRENT tsn: 0 tsh: 2 addr: 0xa9f6a5c8 obj: 76896 cls: DATA bscn: 0x0.1ac898 BH (0xa9f6a5c8) file#: 1 rdba: 0x00415c91 (1/89233) class: 1 ba: 0xa9e56000 set: 5 pool: 3 bsz: 8192 bsi: 0 sflg: 3 pwc: 0,15 dbwrid: 0 obj: 76896 objn: 76896 tsn: 0 afn: 1 hint: f hash: [0x91f4e970,0xbae9d5b8] lru: [0x91f58848,0xa9f6a828] lru-flags: debug_dump obj-flags: object_ckpt_list ckptq: [0x9df6d1d8,0xa9f6a740] fileq: [0xa2ece670,0xbdf4ed68] objq: [0xb4964e00,0xb4964e00] objaq: [0xb4964de0,0xb4964de0] st: XCURRENT md: NULL fpin: 'kdswh11: kdst_fetch' tch: 2 le: 0xa4ff3080 flags: buffer_dirty redo_since_read LRBA: [0x19.5671.0] LSCN: [0x0.1ac898] HSCN: [0x0.1ac898] HSUB: [1] buffer tsn: 0 rdba: 0x00415c91 (1/89233) scn: 0x0000.001ac898 seq: 0x01 flg: 0x00 tail: 0xc8980601 frmt: 0x02 chkval: 0x0000 type: 0x06=trans data ??????block: (1/89233)?GLOBAL CACHE ELEMENT DUMP?LOCK????X ??XG , ??????Current Block????Instance??modify???,????????????? ????Instance 2 ????: Instance 2 Session C: SQL> update test set id=id+1 where id=2; 1 row updated. Instance 2 Session D: SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 1 0 3 1756658 SQL> oradebug setmypid; Statement processed. SQL> oradebug dump gc_elements 255; Statement processed. SQL> oradebug tracefile_name; /s01/orabase/diag/rdbms/vprod/VPROD2/trace/VPROD2_ora_13038.trc GLOBAL CACHE ELEMENT DUMP (address: 0x89fb25a0): id1: 0x15c91 id2: 0x1 pkey: OBJ#76896 block: (1/89233) lock: XG rls: 0x0 acq: 0x0 latch: 3 flags: 0x20 fair: 0 recovery: 0 fpin: 'kduwh01: kdusru' bscn: 0x0.1acdf3 bctx: (nil) write: 0 scan: 0x0 lcp: (nil) lnk: [NULL] lch: [0x96f4cf80,0x96f4cf80] seq: 61 hist: 324 21 143:0 19 16 352 329 144:6 14 7 352 197 LIST OF BUFFERS LINKED TO THIS GLOBAL CACHE ELEMENT: flg: 0x0a000001 state: XCURRENT tsn: 0 tsh: 1 addr: 0x96f4ce50 obj: 76896 cls: DATA bscn: 0x0.1acdf6 BH (0x96f4ce50) file#: 1 rdba: 0x00415c91 (1/89233) class: 1 ba: 0x96bd4000 set: 5 pool: 3 bsz: 8192 bsi: 0 sflg: 2 pwc: 0,15 dbwrid: 0 obj: 76896 objn: 76896 tsn: 0 afn: 1 hint: f hash: [0x96ee1fe8,0xbae9d5b8] lru: [0x96f4d0b0,0x96f4cdc0] obj-flags: object_ckpt_list ckptq: [0xbdf519b8,0x96f4d5a8] fileq: [0xbdf519d8,0xbdf519d8] objq: [0xb4a47b90,0xb4a47b90] objaq: [0x96f4d0e8,0xb4a47b70] st: XCURRENT md: NULL fpin: 'kduwh01: kdusru' tch: 1 le: 0x89fb25a0 flags: buffer_dirty redo_since_read remote_transfered LRBA: [0x11.9e18.0] LSCN: [0x0.1acdf6] HSCN: [0x0.1acdf6] HSUB: [1] buffer tsn: 0 rdba: 0x00415c91 (1/89233) scn: 0x0000.001acdf6 seq: 0x01 flg: 0x00 tail: 0xcdf60601 frmt: 0x02 chkval: 0x0000 type: 0x06=trans data GCS CLIENT 0x89fb2618,6 resp[(nil),0x15c91.1] pkey 76896.0 grant 2 cvt 0 mdrole 0x42 st 0x100 lst 0x20 GRANTQ rl G0 master 1 owner 2 sid 0 remote[(nil),0] hist 0x94121c601163423c history 0x3c.0x4.0xd.0xb.0x1.0xc.0x7.0x9.0x14.0x1. cflag 0x0 sender 1 flags 0x0 replay# 0 abast (nil).x0.1 dbmap (nil) disk: 0x0000.00000000 write request: 0x0000.00000000 pi scn: 0x0000.00000000 sq[(nil),(nil)] msgseq 0x1 updseq 0x0 reqids[6,0,0] infop (nil) lockseq x2b8 pkey 76896.0 hv 93 [stat 0x0, 1->1, wm 32768, RMno 0, reminc 18, dom 0] kjga st 0x4, step 0.0.0, cinc 20, rmno 6, flags 0x0 lb 0, hb 0, myb 15250, drmb 15250, apifrz 0 ?Instance 2??????block: (1/89233)? GLOBAL CACHE ELEMENT Lock Convert?lock: XG ????GC_ELEMENTS DUMP???XCUR Cache Fusion?,???????X$ VIEW,??? X$LE X$KJBR X$KJBL, ???X$ VIEW???????????????????: INSTANCE 2 Session D: SELECT * FROM x$le WHERE le_addr IN (SELECT le_addr FROM x$bh WHERE obj IN (SELECT data_object_id FROM dba_objects WHERE owner = 'SYS' AND object_name = 'TEST') AND class = 1 AND state != 3); ADDR INDX INST_ID LE_ADDR LE_ID1 LE_ID2 ---------------- ---------- ---------- ---------------- ---------- ---------- LE_RLS LE_ACQ LE_FLAGS LE_MODE LE_WRITE LE_LOCAL LE_RECOVERY ---------- ---------- ---------- ---------- ---------- ---------- ----------- LE_BLKS LE_TIME LE_KJBL ---------- ---------- ---------------- 00007F94CA14CF60 7003 2 0000000089FB25A0 89233 1 0 0 32 2 0 1 0 1 0 0000000089FB2618 PCM Resource NAME?[ID1][ID2],[BL]???, ID1?ID2 ??blockno? fileno????, ??????????GC_elements dump?? id1: 0x15c91 id2: 0×1 pkey: OBJ#76896 block: (1/89233)?? ,?  kjblname ? kjbrname ??”[0x15c91][0x1],[BL]” ??: INSTANCE 2 Session D: SQL> set linesize 80 pagesize 1400 SQL> SELECT * 2 FROM x$kjbl l 3 WHERE l.kjblname LIKE '%[0x15c91][0x1],[BL]%'; ADDR INDX INST_ID KJBLLOCKP KJBLGRANT KJBLREQUE ---------------- ---------- ---------- ---------------- --------- --------- KJBLROLE KJBLRESP KJBLNAME ---------- ---------------- ------------------------------ KJBLNAME2 KJBLQUEUE ------------------------------ ---------- KJBLLOCKST KJBLWRITING ---------------------------------------------------------------- ----------- KJBLREQWRITE KJBLOWNER KJBLMASTER KJBLBLOCKED KJBLBLOCKER KJBLSID KJBLRDOMID ------------ ---------- ---------- ----------- ----------- ---------- ---------- KJBLPKEY ---------- 00007F94CA22A288 451 2 0000000089FB2618 KJUSEREX KJUSERNL 0 00 [0x15c91][0x1],[BL][ext 0x0,0x 89233,1,BL 0 GRANTED 0 0 1 0 0 0 0 0 76896 SQL> SELECT r.* FROM x$kjbr r WHERE r.kjbrname LIKE '%[0x15c91][0x1],[BL]%'; no rows selected Instance 1 session B: SQL> SELECT r.* FROM x$kjbr r WHERE r.kjbrname LIKE '%[0x15c91][0x1],[BL]%'; ADDR INDX INST_ID KJBRRESP KJBRGRANT KJBRNCVL ---------------- ---------- ---------- ---------------- --------- --------- KJBRROLE KJBRNAME KJBRMASTER KJBRGRANTQ ---------- ------------------------------ ---------- ---------------- KJBRCVTQ KJBRWRITER KJBRSID KJBRRDOMID KJBRPKEY ---------------- ---------------- ---------- ---------- ---------- 00007F801ACA68F8 1355 1 00000000B5A62AE0 KJUSEREX KJUSERNL 0 [0x15c91][0x1],[BL][ext 0x0,0x 0 00000000B48BB330 00 00 0 0 76896 ??????Instance 1???block: (1/89233),??????Instance 2 build cr block ????Instance 1, ?????????? ????? Instance 1? Foreground Process ? Instance 2?LMS??????RAC  TRACE: Instance 2: [oracle@vrh2 ~]$ ps -ef|grep ora_lms|grep -v grep oracle 23364 1 0 Apr29 ? 00:33:15 ora_lms0_VPROD2 SQL> oradebug setospid 23364 Oracle pid: 13, Unix process pid: 23364, image: [email protected] (LMS0) SQL> oradebug event 10046 trace name context forever,level 8:10708 trace name context forever,level 103: trace[rac.*] disk high; Statement processed. SQL> oradebug tracefile_name /s01/orabase/diag/rdbms/vprod/VPROD2/trace/VPROD2_lms0_23364.trc Instance 1 session B : SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 3 1756658 3 1756661 3 1755287 Instance 1 session A : SQL> alter session set events '10046 trace name context forever,level 8:10708 trace name context forever,level 103: trace[rac.*] disk high'; Session altered. SQL> select * from test; ID ---------- 2 2 SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 3 1761520 ?x$BH?????,???????Instance 1???build??CR block,????? TRACE ??: Instance 1 foreground Process: PARSING IN CURSOR #140336527348792 len=18 dep=0 uid=0 oct=3 lid=0 tim=1335939136125254 hv=1689401402 ad='b1a4c828' sqlid='c99yw1xkb4f1u' select * from test END OF STMT PARSE #140336527348792:c=2999,e=2860,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=1,plh=1357081020,tim=1335939136125253 EXEC #140336527348792:c=0,e=40,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,plh=1357081020,tim=1335939136125373 WAIT #140336527348792: nam='SQL*Net message to client' ela= 6 driver id=1650815232 #bytes=1 p3=0 obj#=0 tim=1335939136125420 *** 2012-05-02 02:12:16.125 kclscrs: req=0 block=1/89233 2012-05-02 02:12:16.125574 : kjbcro[0x15c91.1 76896.0][4] *** 2012-05-02 02:12:16.125 kclscrs: req=0 typ=nowait-abort *** 2012-05-02 02:12:16.125 kclscrs: bid=1:3:1:0:f:1e:0:0:10:0:0:0:1:2:4:1:20:0:0:0:c3:49:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:4:3:2:1:2:0:1c:0:4d:26:a3:52:0:0:0:0:c7:c:ca:62:c3:49:0:0:0:0:1:0:14:8e:47:76:1:2:dc:5:a9:fe:17:75:0:0:0:0:0:0:0:0:0:0:0:0:99:ed:0:0:0:0:0:0:10:0:0:0 2012-05-02 02:12:16.125718 : kjbcro[0x15c91.1 76896.0][4] 2012-05-02 02:12:16.125751 : GSIPC:GMBQ: buff 0xba0ee018, queue 0xbb79a7b8, pool 0x60013fa0, freeq 0, nxt 0xbb79a7b8, prv 0xbb79a7b8 2012-05-02 02:12:16.125780 : kjbsentscn[0x0.1ae0f0][to 2] 2012-05-02 02:12:16.125806 : GSIPC:SENDM: send msg 0xba0ee088 dest x20001 seq 177740 type 36 tkts xff0000 mlen x1680198 2012-05-02 02:12:16.125918 : kjbmscr(0x15c91.1)reqid=0x8(req 0xa4ff30f8)(rinst 1)hldr 2(infosz 200)(lseq x2b8) 2012-05-02 02:12:16.126959 : GSIPC:KSXPCB: msg 0xba0ee088 status 30, type 36, dest 2, rcvr 1 *** 2012-05-02 02:12:16.127 kclwcrs: wait=0 tm=1233 *** 2012-05-02 02:12:16.127 kclwcrs: got 1 blocks from ksxprcv WAIT #140336527348792: nam='gc cr block 2-way' ela= 1233 p1=1 p2=89233 p3=1 obj#=76896 tim=1335939136127199 2012-05-02 02:12:16.127272 : kjbcrcomplete[0x15c91.1 76896.0][0] 2012-05-02 02:12:16.127309 : kjbrcvdscn[0x0.1ae0f0][from 2][idx 2012-05-02 02:12:16.127329 : kjbrcvdscn[no bscn <= rscn 0x0.1ae0f0][from 2] ???? kjbcro[0x15c91.1 76896.0][4] kjbsentscn[0x0.1ae0f0][to 2] ?Instance 2??SCN=1ae0f0=1761520? block: (1/89233),???’gc cr block 2-way’ ??,?????????CR block? Instance 2 LMS TRACE 2012-05-02 02:12:15.634057 : GSIPC:RCVD: ksxp msg 0x7f16e1598588 sndr 1 seq 0.177740 type 36 tkts 0 2012-05-02 02:12:15.634094 : GSIPC:RCVD: watq msg 0x7f16e1598588 sndr 1, seq 177740, type 36, tkts 0 2012-05-02 02:12:15.634108 : GSIPC:TKT: collect msg 0x7f16e1598588 from 1 for rcvr -1, tickets 0 2012-05-02 02:12:15.634162 : kjbrcvdscn[0x0.1ae0f0][from 1][idx 2012-05-02 02:12:15.634186 : kjbrcvdscn[no bscn1, wm 32768, RMno 0, reminc 18, dom 0] kjga st 0x4, step 0.0.0, cinc 20, rmno 6, flags 0x0 lb 0, hb 0, myb 15250, drmb 15250, apifrz 0 GCS CLIENT END 2012-05-02 02:12:15.635211 : kjbdowncvt[0x15c91.1 76896.0][1][options x0] 2012-05-02 02:12:15.635230 : GSIPC:AMBUF: rcv buff 0x7f16e1c56420, pool rcvbuf, rqlen 1103 2012-05-02 02:12:15.635308 : GSIPC:GPBMSG: new bmsg 0x7f16e1c56490 mb 0x7f16e1c56420 msg 0x7f16e1c564b0 mlen 152 dest x101 flushsz -1 2012-05-02 02:12:15.635334 : kjbmslset(0x15c91.1)) seq 0x4 reqid=0x6 (shadow 0xb48bb330.xb)(rsn 2)(mas@1) 2012-05-02 02:12:15.635355 : GSIPC:SPBMSG: send bmsg 0x7f16e1c56490 blen 184 msg 0x7f16e1c564b0 mtype 33 attr|dest x30101 bsz|fsz x1ffff 2012-05-02 02:12:15.635377 : GSIPC:SNDQ: enq msg 0x7f16e1c56490, type 65521 seq 118669, inst 1, receiver 1, queued 1 *** 2012-05-02 02:12:15.635 kclccctx: cleanup copy 0x7f16e1d94798 2012-05-02 02:12:15.635479 : [kjmpmsgi:compl][type 36][msg 0x7f16e1598588][seq 177740.0][qtime 0][ptime 1257] 2012-05-02 02:12:15.635511 : GSIPC:BSEND: flushing sndq 0xb491dd28, id 1, dcx 0xbc516778, inst 1, rcvr 1 qlen 0 1 2012-05-02 02:12:15.635536 : GSIPC:BSEND: no batch1 msg 0x7f16e1c56490 type 65521 len 184 dest (1:1) 2012-05-02 02:12:15.635557 : kjbsentscn[0x0.1ae0f1][to 1] 2012-05-02 02:12:15.635578 : GSIPC:SENDM: send msg 0x7f16e1c56490 dest x10001 seq 118669 type 65521 tkts x10002 mlen xb800e8 WAIT #0: nam='gcs remote message' ela= 180 waittime=1 poll=0 event=0 obj#=0 tim=1335939135635819 2012-05-02 02:12:15.635853 : GSIPC:RCVD: ksxp msg 0x7f16e167e0b0 sndr 1 seq 0.177741 type 32 tkts 0 2012-05-02 02:12:15.635875 : GSIPC:RCVD: watq msg 0x7f16e167e0b0 sndr 1, seq 177741, type 32, tkts 0 2012-05-02 02:12:15.636012 : GSIPC:TKT: collect msg 0x7f16e167e0b0 from 1 for rcvr -1, tickets 0 2012-05-02 02:12:15.636040 : kjbrcvdscn[0x0.1ae0f1][from 1][idx 2012-05-02 02:12:15.636060 : kjbrcvdscn[no bscn <= rscn 0x0.1ae0f1][from 1] 2012-05-02 02:12:15.636082 : GSIPC:TKT: dest (1:1) rtkt not acked 1  unassigned bufs 0  tkts 0  newbufs 0 2012-05-02 02:12:15.636102 : GSIPC:TKT: remove ctx dest (1:1) 2012-05-02 02:12:15.636125 : [kjmxmpm][type 32][seq 0.177741][msg 0x7f16e167e0b0][from 1] 2012-05-02 02:12:15.636146 : kjbmpocr(0xb0.6)seq 0x1,reqid=0x23a,(client 0x9fff7b58,0x1)(from 1)(lseq xdf0) 2????LMS????????? ??gcs remote message GSIPC ????SCN=[0x0.1ae0f0] block=1/89233???,??BAST kjbmpbast(0x15c91.1),?? block=1/89233??????? ??fairness??(?11.2.0.3???_fairness_threshold=2),?current block?KCL: F156: fairness downconvert,?Xcurrent DownConvert? Scurrent: Instance 2: SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 2 0 3 1756658 ??Instance 2 LMS ?cr block??? kjbmslset(0x15c91.1)) ????SEND QUEUE GSIPC:SNDQ: enq msg 0x7f16e1c56490? ???????Instance 1???? block: (1/89233)??? ??????: Instance 2: SQL> select CURRENT_RESULTS,LIGHT_WORKS from v$cr_block_server; CURRENT_RESULTS LIGHT_WORKS --------------- ----------- 29273 437 Instance 1 session A: SQL> SQL> select * from test; ID ---------- 2 2 SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 3 1761942 3 1761932 1 0 3 1761520 Instance 2: SQL> select CURRENT_RESULTS,LIGHT_WORKS from v$cr_block_server; CURRENT_RESULTS LIGHT_WORKS --------------- ----------- 29274 437 select * from test END OF STMT PARSE #140336529675592:c=0,e=337,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,plh=1357081020,tim=1335939668940051 EXEC #140336529675592:c=0,e=96,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,plh=1357081020,tim=1335939668940204 WAIT #140336529675592: nam='SQL*Net message to client' ela= 5 driver id=1650815232 #bytes=1 p3=0 obj#=0 tim=1335939668940348 *** 2012-05-02 02:21:08.940 kclscrs: req=0 block=1/89233 2012-05-02 02:21:08.940676 : kjbcro[0x15c91.1 76896.0][5] *** 2012-05-02 02:21:08.940 kclscrs: req=0 typ=nowait-abort *** 2012-05-02 02:21:08.940 kclscrs: bid=1:3:1:0:f:21:0:0:10:0:0:0:1:2:4:1:20:0:0:0:c3:49:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:4:3:2:1:2:0:1f:0:4d:26:a3:52:0:0:0:0:c7:c:ca:62:c3:49:0:0:0:0:1:0:17:8e:47:76:1:2:dc:5:a9:fe:17:75:0:0:0:0:0:0:0:0:0:0:0:0:99:ed:0:0:0:0:0:0:10:0:0:0 2012-05-02 02:21:08.940799 : kjbcro[0x15c91.1 76896.0][5] 2012-05-02 02:21:08.940833 : GSIPC:GMBQ: buff 0xba0ee018, queue 0xbb79a7b8, pool 0x60013fa0, freeq 0, nxt 0xbb79a7b8, prv 0xbb79a7b8 2012-05-02 02:21:08.940859 : kjbsentscn[0x0.1ae28c][to 2] 2012-05-02 02:21:08.940870 : GSIPC:SENDM: send msg 0xba0ee088 dest x20001 seq 177810 type 36 tkts xff0000 mlen x1680198 2012-05-02 02:21:08.940976 : kjbmscr(0x15c91.1)reqid=0xa(req 0xa4ff30f8)(rinst 1)hldr 2(infosz 200)(lseq x2b8) 2012-05-02 02:21:08.941314 : GSIPC:KSXPCB: msg 0xba0ee088 status 30, type 36, dest 2, rcvr 1 *** 2012-05-02 02:21:08.941 kclwcrs: wait=0 tm=707 *** 2012-05-02 02:21:08.941 kclwcrs: got 1 blocks from ksxprcv 2012-05-02 02:21:08.941818 : kjbassume[0x15c91.1][sender 2][mymode x1][myrole x0][srole x0][flgs x0][spiscn 0x0.0][swscn 0x0.0] 2012-05-02 02:21:08.941852 : kjbrcvdscn[0x0.1ae28d][from 2][idx 2012-05-02 02:21:08.941871 : kjbrcvdscn[no bscn ??????????????SCN=[0x0.1ae28c]=1761932 Version?CR block, ????receive????Xcurrent Block??SCN=1ae28d=1761933,Instance 1???Xcurrent Block???build????????SCN=1761932?CR BLOCK, ????????Current block,?????????'gc current block 2-way'? ?????????????request current block,?????kjbcro;?????Instance 2?LMS???????Current Block: Instance 2 LMS trace: 2012-05-02 02:21:08.448743 : GSIPC:RCVD: ksxp msg 0x7f16e14a4398 sndr 1 seq 0.177810 type 36 tkts 0 2012-05-02 02:21:08.448778 : GSIPC:RCVD: watq msg 0x7f16e14a4398 sndr 1, seq 177810, type 36, tkts 0 2012-05-02 02:21:08.448798 : GSIPC:TKT: collect msg 0x7f16e14a4398 from 1 for rcvr -1, tickets 0 2012-05-02 02:21:08.448816 : kjbrcvdscn[0x0.1ae28c][from 1][idx 2012-05-02 02:21:08.448834 : kjbrcvdscn[no bscn <= rscn 0x0.1ae28c][from 1] 2012-05-02 02:21:08.448857 : GSIPC:TKT: dest (1:1) rtkt not acked 2  unassigned bufs 0  tkts 0  newbufs 0 2012-05-02 02:21:08.448875 : GSIPC:TKT: remove ctx dest (1:1) 2012-05-02 02:21:08.448970 : [kjmxmpm][type 36][seq 0.177810][msg 0x7f16e14a4398][from 1] 2012-05-02 02:21:08.448993 : kjbmpbast(0x15c91.1) reqid=0x6 (req 0xa4ff30f8)(reqinst 1)(reqid 10)(flags x0) *** 2012-05-02 02:21:08.449 kclcrrf: req=48054 block=1/89233 *** 2012-05-02 02:21:08.449 kcl_compress_block: compressed: 6 free space: 7680 2012-05-02 02:21:08.449085 : kjbsentscn[0x0.1ae28d][to 1] 2012-05-02 02:21:08.449142 : kjbdeliver[to 1][0xa4ff30f8][10][current 1] 2012-05-02 02:21:08.449164 : kjbmssch(reqlock 0xa4ff30f8,10)(to 1)(bsz 344) 2012-05-02 02:21:08.449183 : GSIPC:AMBUF: rcv buff 0x7f16e18bcec8, pool rcvbuf, rqlen 1102 *** 2012-05-02 02:21:08.449 kclccctx: cleanup copy 0x7f16e1d94838 *** 2012-05-02 02:21:08.449 kcltouched: touch seconds 3271 *** 2012-05-02 02:21:08.449 kclgrantlk: req=48054 2012-05-02 02:21:08.449347 : [kjmpmsgi:compl][type 36][msg 0x7f16e14a4398][seq 177810.0][qtime 0][ptime 1119] WAIT #0: nam='gcs remote message' ela= 568 waittime=1 poll=0 event=0 obj#=0 tim=1335939668449962 2012-05-02 02:21:08.450001 : GSIPC:RCVD: ksxp msg 0x7f16e1bb22a0 sndr 1 seq 0.177811 type 32 tkts 0 2012-05-02 02:21:08.450024 : GSIPC:RCVD: watq msg 0x7f16e1bb22a0 sndr 1, seq 177811, type 32, tkts 0 2012-05-02 02:21:08.450043 : GSIPC:TKT: collect msg 0x7f16e1bb22a0 from 1 for rcvr -1, tickets 0 2012-05-02 02:21:08.450060 : kjbrcvdscn[0x0.1ae28e][from 1][idx 2012-05-02 02:21:08.450078 : kjbrcvdscn[no bscn <= rscn 0x0.1ae28e][from 1] 2012-05-02 02:21:08.450097 : GSIPC:TKT: dest (1:1) rtkt not acked 3  unassigned bufs 0  tkts 0  newbufs 0 2012-05-02 02:21:08.450116 : GSIPC:TKT: remove ctx dest (1:1) 2012-05-02 02:21:08.450136 : [kjmxmpm][type 32][seq 0.177811][msg 0x7f16e1bb22a0][from 1] 2012-05-02 02:21:08.450155 : kjbmpocr(0xb0.6)seq 0x1,reqid=0x23e,(client 0x9fff7b58,0x1)(from 1)(lseq xdf4) ???Instance 2??LMS???,???build cr block,??????Instance 1?????Current Block??????Instance 2??v$cr_block_server??????LIGHT_WORKS?????current block transfer??????,??????? CR server? Light Work Rule(Light Work Rule?8i Cr Server?????????,?Remote LMS?? build CR????????,resource holder?LMS???????block,????CR build If creating the consistent read version block involves too much work (such as reading blocks from disk), then the holder sends the block to the requestor, and the requestor completes the CR fabrication. The holder maintains a fairness counter of CR requests. After the fairness threshold is reached, the holder downgrades it to lock mode.)? ??????? CR Request ????Current Block?? ???:??????class?block,CR server??????? ??undo block?? undo header block?CR quest, LMS????Current Block, ????? ???? ??????? block cleanout? CR  Version??????? ???????? data blocks, ??????? CR quest  & CR received?(???????Light Work Rule,LMS"??"), ??Current Block??DownConvert???S lock,??LMS???????ship??current version?block? ??????? , ?????? ,???????DownConvert?????”_fairness_threshold“???200,????Xcurrent Block?????Scurrent, ????LMS?????Current Version?Data Block: SQL> show parameter fair NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ _fairness_threshold integer 200 Instance 1: SQL> update test set id=id+1 where id=4; 1 row updated. Instance 2: SQL> update test set id=id+1 where id=2; 1 row updated. SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 1 0 3 1838166 ?Instance 1? ????,? ??instance 2? v$cr_block_server?? instance 1 SQL> select * from test; ID ---------- 10 3 instance 2: SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 1 0 3 1883707 8 0 SQL> select * from test; ID ---------- 10 3 SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 1 0 3 1883707 8 0 ................... SQL> / STATE CR_SCN_BAS ---------- ---------- 2 0 3 1883707 3 1883695 repeat cr request on Instance 1 SQL> / STATE CR_SCN_BAS ---------- ---------- 8 0 3 1883707 3 1883695 ??????_fairness_threshold????????,?????200 ????????CR serve??Downgrade?lock, ????data block? CR Request????Receive? Current Block?

    Read the article

  • Monitoring almost anything with BizTalk 360

    - by Michael Stephenson
    When you work in an integration environment it is common that you will find yourself in a situation where you integrate with some unusual applications or have some unusual dependencies. That is the nature of integration. When you work with BizTalk one of the common problems is that BizTalk often is the place where problems with applications you integrate with are highlighted and these external applications may have poor monitoring solutions. Fortunately if you are a working with a customer who uses BizTalk 360 then it contains a feature called the "Web Endpoint Manager". Typically the web endpoint manager is used to monitor web services that you integrate with and will ping them at appropriate times to make sure they return the expected HTTP status code. When you have an usual situation where you want to monitor something which is key to the success to your solution but you find yourself having to consider a significant custom solution to monitor the external dependency then the Web Endpoint Manager could be your friend. The endpoint manager monitors a url and checks for a certain status code. This means that you can create your own aspx web page and then make BizTalk 360 monitor this web page. Behind the web page you could write any code you wished. An example of this is architecture is shown in the below diagram.     In the custom web page you would implement some custom code to do whatever it is that you want to monitor. In the below code snippet you can see how the Page_Load default method is doing some kind of check then depending on the result of the check it returns a certain HTTP code. protected void Page_Load(object sender, EventArgs e) { var result = CheckSomething();   if (result == "Success") Response.StatusCode = 202; else if (result == "DatabaseError") Response.StatusCode = 510; else if (result == "SystemError") Response.StatusCode = 512; else Response.StatusCode = 513;   }   In BizTalk 360 you would go into the Monitor and Notify tab and then to BizTalk Environment which gives you access to the Web Endpoint Manager. You need an alarm setup which configures how the endpoint will be checked. I'm not going to go through the details of creating the alarm as this is already documented in the BizTalk 360 documentation. One point to note is that in the example I am using I setup a threshold alarm which means that the url is checked about every minute and if there is an error that persists for a period of time then the alarm will raise the alert notification. In my example I configured the alarm to fire if the error persisted for 3 minutes. The below picture shows accessing the endpoint manager.   In the web endpoint manager you would then configure your endpoint to monitor and the HTTP response code which indicates all is working fine. The below picture shows this. I now have my endpoint monitoring setup and BizTalk 360 should be checking my custom endpoint to see that it is available. If I wanted to manually sanity check that the endpoints I have registered are working fine then clicking the Refresh button will show if they are all good or not. If my custom ASP.net page which is checking my dependency gets a problem you will see in the endpoint manager that the status code does not match the expected return code and your endpoints will display in red and you can see the problem. The below picture shows this. If I use specific HTTP response codes for the errors the custom ASP.net page might encounter I can easily interpret these to know what the problem is. Using the alarms and notifications with BizTalk 360 it means when your endpoint goes into an error state you can easily configure email or SMS notifications from BizTalk 360 to tell you that your endpoint is having problems and you can use BizTalk 360 to help correlate what the problem is to allow you to investigate further. Below you can see the email which tells me my endpoint is not working.   When everything returns to normal you will see the status is now fixed and you will see a situation like below where you can see the WebEndpoints are now green and the return code matches what is expected.   Conclusion As you can see it is really easy to plug your own custom ASP.net page into the BizTalk 360 web endpoint monitoring feature. This extension then gives you the power to really extend the monitoring to almost anything you want as long as you can write some .net code to check that the dependency is available and working. It would be interesting to hear of any ideas people have around things they would monitor with this extension. More details on the end point monitor can be found on the following link: http://www.biztalk360.com/tour/monitoring_notifications

    Read the article

  • Breaking up the Workday– Overcoming the Workaholic Syndrome

    - by dwahlin
    Hi, my name’s Dan Wahlin and I’m a workaholic – I admit it. It’s good from the standpoint that I get a lot done but it also has a lot of cons associated with it as well that I’m not proud of. I literally can’t watch TV without feeling like I should be doing something more productive (although I have no problem going to see movies at a theater or watching sporting events – that’s my escape I guess). On vacation it’s sometimes difficult the first few days to just “let go” of work and enjoy the time with my family. I always feel like I should be checking email and following up with different business projects. Fortunately, my wife knows me really well after 17 years of marriage and “gently” restricts my usage of laptops and other gadgets while we’re out. She also reminds me that constantly burying my face in gadgets just isn’t cool and shows a distinct lack of self control. On a given day I typically put in between 12 (at a minimum) up to 16-18 hours working on projects. My company does .NET consulting (ASP.NET/jQuery, SharePoint and Silverlight) but we also do a lot in the training space so there’s always a client project, some new courseware or some other deliverable that has to be worked on. My normal process for handling that is to just work my butt off and see how much I can get done. That process has worked well for a long time but when you start realizing that your happiness comes from how much work you accomplished that day then you have a problem. That’s especially true if you have kids (which I do….two awesome boys). It’s almost as if working more hours feels like I’m more successful or something which is of course ridiculous. It may actually mean that I’m too distracted or disorganized. Lately I’ve realized that while I’m still productive and always meet my deadlines, I’m really burnt out by the afternoon and have lost some of the excitement I used to have. Part of that’s normal I think given that I’ve been doing this for close to 15 years now, but in thinking through it more I realized that I just need to get away from the desk and take a break. By far, the happiest time of my life was my childhood. Part of that was due to having awesome parents, having far less responsibility (a big factor I suspect), being able to hang-out with friends at school, playing sports, games, etc. but I think a big part of the overall happiness came from being outside a lot. I lived on my bike as a little kid and as I grew up I shared time between riding an ATV all over the place, shooting hoops on the basketball court, playing golf and working on a golf course (all outside work of course).  Being a software developer and trainer I generally spend 95% or more of my day indoors and only see the sun when driving from place to place or by looking out the window (that’s sad because I live in a suburb of Phoenix, AZ where it’s nearly always sunny). I haven’t looked into any scientific studies on the matter, but I’d be willing to bet there’s a direct correlation between overall productivity/happiness and being outside some throughout the day (sunny or not). But, I wasn’t sure what to do about it since I do have a lot of deadlines I need to meet after all. While talking with my wife last night I mentioned how I feel like I’m in a rut and want to get the “fun” back that I used to have. She immediately said that I need to start making time for breaks (a real quick fact – she’s a lot smarter than me and nearly always right). Of course my first thought was that I’d be less productive taking breaks. If I spend 2 hours just relaxing then I’m losing 2 hours of work. But, I thought about it more and realized that I’m probably less productive when I work 10+ hours and only take less than 30 minutes for a lunch break to relax a little. I bet my brain is screaming, “Please let me relax a little so I can figure out these problems you’re trying to resolve!”. So, starting today I’m going to try to break the workaholic habit and spend time outside of the office. That could mean sitting around outside, working out, golfing, or whatever. I’ve decided that no gadgets are allowed during that time and that I shouldn’t work for more than 4 hours straight without taking a break. I have no idea how my little “break the workaholic syndrome” experiment will go or how long it will last, but I’d be very interested in hearing from others on how they keep fresh and focused without working yourself to death. If you have any specific ideas, techniques or practices you follow please share them. There’s a lot more to life than work and some of us (and I’m thinking of myself specifically) need to take a long, hard look at what kind of balance we currently have. I’d hate to look back at my life when I’m 80 years old and say, “The only thing I did was work – I missed out on life!”.

    Read the article

  • git pull gives error: 401 Authorization Required while accessing https://git.foo.com/bar.git

    - by spuder
    My macbook pro is able to clone/push/pull from the company git server. My cent 6.3 vm gets a 401 error git clone https://git.acme.com/git/torque-setup "error: The requested URL returned error: 401 Authorization Required while accessing https://git.acme.com/git/torque-setup/info/refs As a work around, I've tried creating a folder, with an empty repository, then setting the remote to the company server. I get the same error when trying a git pull The remotes are identical between the machines MacBook Pro (working) git --version git version 1.7.10.2 (Apple Git-33) git remote -v origin https://git.acme.com/git/torque-setup (fetch) origin https://git.acme.com/git/torque-setup (push) Cent 6.3 (not working) yum install -y git git --version git version 1.7.1 git remote -v origin https://git.acme.com/git/torque-setup (fetch) origin https://git.acme.com/git/torque-setup (push) The git server only allows https. Not git or ssh connections. Why is the macbook pro able to do a git pull, while the cent os machine can't? Solution Update 2013-5-15 As jku mentioned, the culprit is the old version of git installed on the cent box. Unfortunately, 1.7.1 is what you get when you run yum install git The work around is to manually install a newer version of git, or simply add the username to the repo git clone https://[email protected]/git/torque-setup

    Read the article

  • 407 Proxy Authentication Required

    - by Hemant Kothiyal
    I am working on a website, in which I am retrieving XML data from an external URL, using the following code WebRequest req = WebRequest.Create("External server url"); req.Proxy = new System.Net.WebProxy("proxyUrl:8080", true); req.Proxy.Credentials = CredentialCache.DefaultCredentials; WebResponse resp = req.GetResponse(); StreamReader textReader = new StreamReader(resp.GetResponseStream()); XmlTextReader xmlReader = new XmlTextReader(textReader); XmlDocument xmlDoc = new XmlDocument(); xmlDoc.Load(xmlReader); This code is working fine on my development PC (Windows XP with .Net 3.5) But when I deploy this code to IIS (Both at Windows XP and at Windows Server 2003) it's giving me following error "The remote server returned an error: (407) Proxy Authentication Required." Sometimes it gives me "The remote server returned an error: (502) Bad Gateway." Following code is from my web.config <system.net> <defaultProxy> <proxy usesystemdefault="False" proxyaddress ="http://172.16.12.12:8080" bypassonlocal ="True" /> </defaultProxy> </system.net> Please help me ? [Edit] Even when i run the website for devlopment PC but through IIS it gives me error "The remote server returned an error: (407) Proxy Authentication Required." But when i run website from Microsoft Devlopment server, it is running fine

    Read the article

  • Webservice Connection Refused

    - by sidcom
    I have developed a web app using a webservice. Everything works fine in the development environment. I have moved the webservice to the production server in a test folder behind my main website. I can browse to the published service localy on the production server and i can access the remote service from my development machine. If I run my web app in my development environment I can use the remote webservice no problem. If I move the web application to the production environment the browser outputs this error when the application performs the ajax login method. The following javascript error is output to the browser Error: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500 Source File: www.grav80.com/clients/callswharf/Redshift/Telerik.Web.UI.WebResource.axd?_TSM_HiddenField_=RadScriptManager1_HiddenField&compress=1&_TSM_CombinedScripts_=%3b%3bSystem.Web.Extensions%2c+Version%3d3.5.0.0%2c+Culture%3dneutral%2c+PublicKeyToken%3d31bf3856ad364e35%3aen-US%3a1247b7d8-6b6c-419f-a45f-8ff264c90734%3aea597d4b%3ab25378d2%3bTelerik.Web.UI%2c+Version%3d2009.2.826.35%2c+Culture%3dneutral%2c+PublicKeyToken%3d121fae78165ba3d4%3aen-US%3ad2d891f5-3533-469c-b9a2-ac7d16eb23ff%3a16e4e7cd%3a86526ba7%3aed16cbdc%3ab7778d6c Line: 15 The Following error appears in the event log Exception information: Exception type: WebException Exception message: Unable to connect to the remote server Request information: Request URL: www.grav80.com/clients/callswharf/redshift/login.aspx Request path: /clients/callswharf/redshift/login.aspx User host address: 77.68.58.231 User: Is authenticated: False Authentication Type: Thread account name: NT AUTHORITY\NETWORK SERVICE You can view the behaviour in the test environment here. http://www.grav80.com/clients/callswharf/redshift/ You can view the service here http://www.grav80.com/clients/callswharf/redshift/service/g80cms.asmx I hope some on can shine some light on this for me.

    Read the article

  • AjaxControlToolkit TabContainer with weird rendering behavior

    - by sohum
    I've built a web application that contains a page that uses the AjaxControlToolkit's TabContainer/TabPanel objects. I've developed a custom stylesheet, as well. I'm developing using Visual Studio 2010. The following is the behavior of my application: VS2010 Development Server (localhost:XXXXX): Works as expected with the custom stylesheet. Local IIS: The TabContainer rendered but the stylesheet wasn't applied. I fixed this by doing a CTRL+F5. It seems that IIS caches stylesheets pretty aggressively. Remote Server: The TabContainer and TabPanel are completely hidden. Looking at the HTML, all of them have their visibility set to hidden. The way I got my files onto my remote server were as follows (I haven't yet set up WebDAV or remote publishing because the server is a Windows 7 box and as far as I am aware does not support FrontPage Extensions): The entire solution is under source code control (SVN). Checked in all pending changes (including projects, aspx files, css, AjaxControlToolkit binaries) Synced on the server. Rebuilt everything on server. Deployed to local IIS on server (which is externally accessible). Both on the local IIS on the server and the development server on the server, the TabContainers are completely hidden. Looking at the SVN status on the server project, only the "AjaxControlToolkit.dll" is under source-code control. All the locale-specific DLLs are not on the server. Could this be a potential issue? I'm not sure what's going on and would appreciate any help. Thanks!

    Read the article

  • Adapting existing HTML/Javascript model to Titanium's latest release (v 0.9)

    - by Alan Neal
    In pre-0.9 versions of Titanium, one could simply specify an .html file (local or remote) in the tiapp.xml file and interact with it in the same manner as one would on a website. As of version 0.9, that is no the longer case. One creates their entire app dynamically. Unfortunately, this broke my previous implementation and, other than an updated Kitchen Sink, much of the new model and API calls are not covered in the documentation (e.g., createLabel). So, my question is this... What are the simplest steps for re-creating the previous effect (knowingly forgoing some of the advantages of the Titanium's latest approach if necessary)? My previous implementation was exactly as it functions on the website. The website has a single index.html file with no content other than links to JavaScript and style files. The document body's onload event called the first JavaScript function (located in the main script) and, from that point forth, the entire content was dynamically created. How can I set up the latest version of Titanium so that I am poised to do the exact same thing? BTW: Whereas I previously had the choice to keep the files local or remote, I don't believe that remote access (e.g., simply using the webView widget to point to the website) is viable. That's because pages displayed via the webView do not have access to most of the API. Since the iPhone and Safari browsers do not support the file input type, the only means for uploading files (something my app requires) is calling Titanium's function. Thanks in advance.

    Read the article

  • Heroku taps push weirdness...

    - by holden
    I have the strangest experience using taps to move data between my machine and heroku. It works fine except that it seems to loose 0s directly behind the decimal place for my geo coordinates. Ie 50.0519322 for some reason gets set to 50.519322... no idea why. When I pull the data from the remote location ie. heroku db:pull... it works fine, all decimal places intact on my machine, however, when i push it back to the remote server it loses these zeros. Especially directly behind the decimal place, though I haven't noticed it elsewhere yet. At first I was storing the lat and lng as simply numeric but refined it to: change_column :places, :lat, :numeric, :precision => 15, :scale => 10 change_column :places, :lng, :numeric, :precision => 15, :scale => 10 With no result, any ideas what's going on? From the console on the remote server i get the lat as being: #<BigDecimal:2aebcc5967c0,'0.50519322E2',18(18)> and my machine as: #<BigDecimal:10232f7c8,'0.50519322E2',12(16)> which is also odd, the second one because it shows up as 50.0519322 when i edit it thru my view but when i do to_f via console it gives me 50.519322

    Read the article

  • Requested Service not found - .NET Remoting

    - by bharat
    I am Getting this exception System.Runtime.Remoting.RemotingException occurred Message="Object '/55337266_9751_4f58_8446_c54ff254222e/rkutlpt5hvsxipmzhb+jkqyl_98.rem' has been disconnected or does not exist at the server." Source="mscorlib" StackTrace: Server stack trace: at System.Runtime.Remoting.Channels.ChannelServices.CheckDisconnectedOrCreateWellKnownObject(IMessage msg) at System.Runtime.Remoting.Channels.ChannelServices.DispatchMessage(IServerChannelSinkStack sinkStack, IMessage msg, IMessage& replyMsg) Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at Common.Interface.Repository.NA.INRR.GetNRun(Int32 NetworkRunId) at Module.NA.ViewModel.NRDViewModel.get_AS() InnerException: Most of the times i am getting this exception this is my remotingDomain method string tcpURL; TcpChannel channel; channel = new TcpChannel(); ChannelServices.RegisterChannel(channel, false); //-- // Remote domain objects //-- tcpURL = string.Format("tcp://{0}:{1}/DomainComposition", ServerName, TcpPort); RemotingConfiguration.RegisterWellKnownClientType(typeof(DomainComposition), tcpURL); //-- // Remote repository objects //-- tcpURL = string.Format("tcp://{0}:{1}/RepositoryComposition", ServerName, TcpPort); RemotingConfiguration.RegisterWellKnownClientType(typeof(RepositoryComposition), tcpURL); //-- // Remote utility objects //-- tcpURL = string.Format("tcp://{0}:{1}/UtilityComposition", ServerName, TcpPort); RemotingConfiguration.RegisterWellKnownClientType(typeof(UtilityComposition), tcpURL); this.Domain = new DomainComposition(); this.Repository = new RepositoryComposition(); this.Utility = new UtilityComposition(); How to Check if the object is disconnect then re initiate the service

    Read the article

  • (rsErrorOpeningConnection) Could not obtain information about Windows NT group/user

    - by ChelleATL
    I am trying to deploy a report to the Reporting Services Server but keep running up against this error: An error occurred during client rendering. An error has occurred during report processing. (rsProcessingAborted) Cannot create a connection to data source 'dataSource1'. (rsErrorOpeningConnection) Could not obtain information about Windows NT group/user 'DOMAIN\useradmin', error code 0x5. Here’s my situation: Everything is being ran using DOMAIN\useradmin and the report is using a remote database. Reporting Services and SQL Server are both ran under DOMAIN\useradmin. DOMAIN\useradmin is a windows AD login and is part of the server machine Administrators group. My test report is using a data source model that in turn is using a data source that is connection to a database on a different SQL Server. The data source is using “Credentials stored securely in the report server” with the options “Use as Windows credentials when connecting to the data source” and “Impersonate the authenticated user after a connection has been made to the data source.” I am using the credentials of DOMAIN\useradmin that is the db owner of the remote database. DOMAIN\useradmin is assigned the roles, System Administrator, System User and Browser, Content Manager, My Reports, Publisher, Report Builder. So if everything is being run under an über AD account, why I am getting this Could not obtain information about Windows NT group/user 'DOMAIN\useradmin' error? Under normal circumstances , an AD login with Publisher permissions will developing reports using a datasource model created by DOMAIN\useradmin but using one of the remote database’s users which is mapped from yet another AD login. I ran the following statements and non errors were returned: use master go xp_grantlogin 'DOMAIN\useradmin' go xp_logininfo 'DOMAIN\useradmin' go

    Read the article

  • Unable to Git-push master to Github

    - by Masi
    This question is related to my problem in understanding rebase, branch and merge, and to the problem How can you commit to your github account as you have a teamMate in your remote list? I found out that other people have had the same problem. The problem seems to be related to /etc/xinet.d/. Problem: unable to push my local branch to my master branch at Github I run git push origin master I get fatal: 'origin' does not appear to be a git repository fatal: The remote end hung up unexpectedly The error message suggests me that the branch 'origin' is not in my local git repository. This way, Git stops connecting to Github. This is strange, since I have not removed the branch 'origin'. My git tree is dev * master ticgit remotes/Math/Math remotes/Math/master remotes/origin/master remotes/Masi/master How can you push your local branch to Github, while you have a teamMate's branch in your local Git? VonC's answer solves the main problem. I put a passphares to my ssh keys. I run $git push github master I get Permission denied (publickey). fatal: The remote end hung up unexpectedly It seems that I need to give the passphrase for Git somehow. How can you make Git to ask passphares?

    Read the article

< Previous Page | 359 360 361 362 363 364 365 366 367 368 369 370  | Next Page >