Search Results

Search found 20116 results on 805 pages for 'network flow'.

Page 364/805 | < Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >

  • How do I turn on wireless adapter on HP Envy dv6 7200 under Ubuntu (any version)?

    - by Dave B.
    I have a new HP Envy dv6 7200 with dual boot Windows 8 / Ubuntu 12.04. In windows, the F12 key in Windows activates the "airplane mode" switch which enables/disables both on-board (mini PCIe) and USB wireless adapters. In Ubuntu, however, the wireless adapter is turned off by default and cannot be turned back on via the F12 key (or any other combination of F12 and Ctrl, Fn, Shift, etc.). Let me explain the "fixes" I've seen in various forums and explain what did or did not happen. These are listed in no particular order. (Spoiler alert: wireless is still broke). Solution 1? Use HP's "Wireless Assistant" utility to permanently activate the wireless card in Windows, then boot into Ubuntu to happily find it working. Unfortunately, this utility works in Windows 7 but not Windows 8. On the other hand, hardware drivers from HP are only available for Windows 8 for this model. Catch 22 (I could not find a comparable utility for Windows 8). Solution 2? Use a USB wireless adapter to sidestep the on-board device. I purchased such a device from thinkpenguin.com to be sure that it would be Linux-friendly. However, the wireless switch enables / disables all wireless devices including USB. So, there's my $50 donation to the nice folks at thinkpenguin.com, but still no solution. Solution 3? Following the Think Penguin folk's suggestion, modify the mini PCI express adapter following instructions here: http://www.notebookforums.com/t/225429/broken-wireless-hardware-switch-fix Tempting, but I then violate the terms of my warranty mere days after opening the box. This might be a good solution for an older machine that you want to get your geek on with, but not for a new box. Solution 4? rfkill unblock all No effect whatsoever. ubuntu@ubuntu-hp-evny:~$ rfkill unblock all ubuntu@ubuntu-hp-evny:~$ rfkill list all 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Solution 5? Re-install drivers. Done and done. Ubuntu recognizes the device - perhaps even without re-installing the drivers? - but cannot turn it on. How do I know this? In the Network Manager drop-down menu, the wireless option is blacked out and a message reads something like: "wireless network is disabled by a hardware switch". Solution 6? Identify a physical switch on the laptop and flip it. There is no such switch on this machine. In fact, walking through Best Buy yesterday, I checked and not a single new laptop PC had a physical switch on it. All of the wireless switches are either the F2 or F12 key ... I wonder if askubuntu will not be plagued by this exact issue in the near future? Additional info - lspci ubuntu@ubuntu-hp-evny:~$ lspci 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.2 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 3 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0de9 (rev a1) 08:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5229 (rev 01) 0a:00.0 Network controller: Ralink corp. Device 539b 0b:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) Any suggestions would be much appreciated!

    Read the article

  • Rkhunter 122 suspect files; do I have a problem?

    - by user276166
    I am new to ubuntu. I am using Xfce Ubuntu 14.04 LTS. I have ran rkhunter a few weeks age and only got a few warnings. The forum said that they were normal. But, this time rkhunter reported 122 warnings. Please advise. casey@Shaman:~$ sudo rkhunter -c [ Rootkit Hunter version 1.4.0 ] Checking system commands... Performing 'strings' command checks Checking 'strings' command [ OK ] Performing 'shared libraries' checks Checking for preloading variables [ None found ] Checking for preloaded libraries [ None found ] Checking LD_LIBRARY_PATH variable [ Not found ] Performing file properties checks Checking for prerequisites [ Warning ] /usr/sbin/adduser [ Warning ] /usr/sbin/chroot [ Warning ] /usr/sbin/cron [ OK ] /usr/sbin/groupadd [ Warning ] /usr/sbin/groupdel [ Warning ] /usr/sbin/groupmod [ Warning ] /usr/sbin/grpck [ Warning ] /usr/sbin/nologin [ Warning ] /usr/sbin/pwck [ Warning ] /usr/sbin/rsyslogd [ Warning ] /usr/sbin/useradd [ Warning ] /usr/sbin/userdel [ Warning ] /usr/sbin/usermod [ Warning ] /usr/sbin/vipw [ Warning ] /usr/bin/awk [ Warning ] /usr/bin/basename [ Warning ] /usr/bin/chattr [ Warning ] /usr/bin/cut [ Warning ] /usr/bin/diff [ Warning ] /usr/bin/dirname [ Warning ] /usr/bin/dpkg [ Warning ] /usr/bin/dpkg-query [ Warning ] /usr/bin/du [ Warning ] /usr/bin/env [ Warning ] /usr/bin/file [ Warning ] /usr/bin/find [ Warning ] /usr/bin/GET [ Warning ] /usr/bin/groups [ Warning ] /usr/bin/head [ Warning ] /usr/bin/id [ Warning ] /usr/bin/killall [ OK ] /usr/bin/last [ Warning ] /usr/bin/lastlog [ Warning ] /usr/bin/ldd [ Warning ] /usr/bin/less [ OK ] /usr/bin/locate [ OK ] /usr/bin/logger [ Warning ] /usr/bin/lsattr [ Warning ] /usr/bin/lsof [ OK ] /usr/bin/mail [ OK ] /usr/bin/md5sum [ Warning ] /usr/bin/mlocate [ OK ] /usr/bin/newgrp [ Warning ] /usr/bin/passwd [ Warning ] /usr/bin/perl [ Warning ] /usr/bin/pgrep [ Warning ] /usr/bin/pkill [ Warning ] /usr/bin/pstree [ OK ] /usr/bin/rkhunter [ OK ] /usr/bin/rpm [ Warning ] /usr/bin/runcon [ Warning ] /usr/bin/sha1sum [ Warning ] /usr/bin/sha224sum [ Warning ] /usr/bin/sha256sum [ Warning ] /usr/bin/sha384sum [ Warning ] /usr/bin/sha512sum [ Warning ] /usr/bin/size [ Warning ] /usr/bin/sort [ Warning ] /usr/bin/stat [ Warning ] /usr/bin/strace [ Warning ] /usr/bin/strings [ Warning ] /usr/bin/sudo [ Warning ] /usr/bin/tail [ Warning ] /usr/bin/test [ Warning ] /usr/bin/top [ Warning ] /usr/bin/touch [ Warning ] /usr/bin/tr [ Warning ] /usr/bin/uniq [ Warning ] /usr/bin/users [ Warning ] /usr/bin/vmstat [ Warning ] /usr/bin/w [ Warning ] /usr/bin/watch [ Warning ] /usr/bin/wc [ Warning ] /usr/bin/wget [ Warning ] /usr/bin/whatis [ Warning ] /usr/bin/whereis [ Warning ] /usr/bin/which [ OK ] /usr/bin/who [ Warning ] /usr/bin/whoami [ Warning ] /usr/bin/unhide.rb [ Warning ] /usr/bin/mawk [ Warning ] /usr/bin/lwp-request [ Warning ] /usr/bin/heirloom-mailx [ OK ] /usr/bin/w.procps [ Warning ] /sbin/depmod [ Warning ] /sbin/fsck [ Warning ] /sbin/ifconfig [ Warning ] /sbin/ifdown [ Warning ] /sbin/ifup [ Warning ] /sbin/init [ Warning ] /sbin/insmod [ Warning ] /sbin/ip [ Warning ] /sbin/lsmod [ Warning ] /sbin/modinfo [ Warning ] /sbin/modprobe [ Warning ] /sbin/rmmod [ Warning ] /sbin/route [ Warning ] /sbin/runlevel [ Warning ] /sbin/sulogin [ Warning ] /sbin/sysctl [ Warning ] /bin/bash [ Warning ] /bin/cat [ Warning ] /bin/chmod [ Warning ] /bin/chown [ Warning ] /bin/cp [ Warning ] /bin/date [ Warning ] /bin/df [ Warning ] /bin/dmesg [ Warning ] /bin/echo [ Warning ] /bin/ed [ OK ] /bin/egrep [ Warning ] /bin/fgrep [ Warning ] /bin/fuser [ OK ] /bin/grep [ Warning ] /bin/ip [ Warning ] /bin/kill [ Warning ] /bin/less [ OK ] /bin/login [ Warning ] /bin/ls [ Warning ] /bin/lsmod [ Warning ] /bin/mktemp [ Warning ] /bin/more [ Warning ] /bin/mount [ Warning ] /bin/mv [ Warning ] /bin/netstat [ Warning ] /bin/ping [ Warning ] /bin/ps [ Warning ] /bin/pwd [ Warning ] /bin/readlink [ Warning ] /bin/sed [ Warning ] /bin/sh [ Warning ] /bin/su [ Warning ] /bin/touch [ Warning ] /bin/uname [ Warning ] /bin/which [ OK ] /bin/kmod [ Warning ] /bin/dash [ Warning ] [Press <ENTER> to continue] Checking for rootkits... Performing check of known rootkit files and directories 55808 Trojan - Variant A [ Not found ] ADM Worm [ Not found ] AjaKit Rootkit [ Not found ] Adore Rootkit [ Not found ] aPa Kit [ Not found ] Apache Worm [ Not found ] Ambient (ark) Rootkit [ Not found ] Balaur Rootkit [ Not found ] BeastKit Rootkit [ Not found ] beX2 Rootkit [ Not found ] BOBKit Rootkit [ Not found ] cb Rootkit [ Not found ] CiNIK Worm (Slapper.B variant) [ Not found ] Danny-Boy's Abuse Kit [ Not found ] Devil RootKit [ Not found ] Dica-Kit Rootkit [ Not found ] Dreams Rootkit [ Not found ] Duarawkz Rootkit [ Not found ] Enye LKM [ Not found ] Flea Linux Rootkit [ Not found ] Fu Rootkit [ Not found ] Fuck`it Rootkit [ Not found ] GasKit Rootkit [ Not found ] Heroin LKM [ Not found ] HjC Kit [ Not found ] ignoKit Rootkit [ Not found ] IntoXonia-NG Rootkit [ Not found ] Irix Rootkit [ Not found ] Jynx Rootkit [ Not found ] KBeast Rootkit [ Not found ] Kitko Rootkit [ Not found ] Knark Rootkit [ Not found ] ld-linuxv.so Rootkit [ Not found ] Li0n Worm [ Not found ] Lockit / LJK2 Rootkit [ Not found ] Mood-NT Rootkit [ Not found ] MRK Rootkit [ Not found ] Ni0 Rootkit [ Not found ] Ohhara Rootkit [ Not found ] Optic Kit (Tux) Worm [ Not found ] Oz Rootkit [ Not found ] Phalanx Rootkit [ Not found ] Phalanx2 Rootkit [ Not found ] Phalanx2 Rootkit (extended tests) [ Not found ] Portacelo Rootkit [ Not found ] R3dstorm Toolkit [ Not found ] RH-Sharpe's Rootkit [ Not found ] RSHA's Rootkit [ Not found ] Scalper Worm [ Not found ] Sebek LKM [ Not found ] Shutdown Rootkit [ Not found ] SHV4 Rootkit [ Not found ] SHV5 Rootkit [ Not found ] Sin Rootkit [ Not found ] Slapper Worm [ Not found ] Sneakin Rootkit [ Not found ] 'Spanish' Rootkit [ Not found ] Suckit Rootkit [ Not found ] Superkit Rootkit [ Not found ] TBD (Telnet BackDoor) [ Not found ] TeLeKiT Rootkit [ Not found ] T0rn Rootkit [ Not found ] trNkit Rootkit [ Not found ] Trojanit Kit [ Not found ] Tuxtendo Rootkit [ Not found ] URK Rootkit [ Not found ] Vampire Rootkit [ Not found ] VcKit Rootkit [ Not found ] Volc Rootkit [ Not found ] Xzibit Rootkit [ Not found ] zaRwT.KiT Rootkit [ Not found ] ZK Rootkit [ Not found ] [Press <ENTER> to continue] Performing additional rootkit checks Suckit Rookit additional checks [ OK ] Checking for possible rootkit files and directories [ None found ] Checking for possible rootkit strings [ None found ] Performing malware checks Checking running processes for suspicious files [ None found ] Checking for login backdoors [ None found ] Checking for suspicious directories [ None found ] Checking for sniffer log files [ None found ] Performing Linux specific checks Checking loaded kernel modules [ OK ] Checking kernel module names [ OK ] [Press <ENTER> to continue] Checking the network... Performing checks on the network ports Checking for backdoor ports [ None found ] Checking for hidden ports [ Skipped ] Performing checks on the network interfaces Checking for promiscuous interfaces [ None found ] Checking the local host... Performing system boot checks Checking for local host name [ Found ] Checking for system startup files [ Found ] Checking system startup files for malware [ None found ] Performing group and account checks Checking for passwd file [ Found ] Checking for root equivalent (UID 0) accounts [ None found ] Checking for passwordless accounts [ None found ] Checking for passwd file changes [ Warning ] Checking for group file changes [ Warning ] Checking root account shell history files [ None found ] Performing system configuration file checks Checking for SSH configuration file [ Not found ] Checking for running syslog daemon [ Found ] Checking for syslog configuration file [ Found ] Checking if syslog remote logging is allowed [ Not allowed ] Performing filesystem checks Checking /dev for suspicious file types [ Warning ] Checking for hidden files and directories [ Warning ] [Press <ENTER> to continue] System checks summary ===================== File properties checks... Required commands check failed Files checked: 137 Suspect files: 122 Rootkit checks... Rootkits checked : 291 Possible rootkits: 0 Applications checks... All checks skipped The system checks took: 5 minutes and 11 seconds All results have been written to the log file (/var/log/rkhunter.log)

    Read the article

  • Remote Workers...We're Not That Bad!

    - by user12601034
    I work from home a lot – my team is located in different cities and countries, my manager is in a different city, and most of our work is done via conference calls, email and collaboration through Oracle Social Network. We’ve figured out how to be effective and involve team members, regardless of where we are all located. When I mention that I work from home, a lot of my friends will laugh, roll their eyes or use their fingers to make quotation marks around “work from home.” Their belief is that I’m sitting at home, eating bon-bons and watching television. The attempts at humor only multiply when they know that my husband also mostly works from home. So, it was with great joy that I read the Lifehacker article Why Remote Workers Are More (Yes, More) Engaged. I’m not going to re-write the article for you, but four highlights from the article include: Proximity breeds complacency –because communicating with employees sitting next to you is so easy, you may not do it well. Absence makes people try harder to connect – because you have to make an effort to connect to your team, you tend to pay better attention when you do connect Leaders of virtual team make better use of tools – when working remotely, you will use technology (many different forms of it) to connect with your team. This daily use of the tools makes you more proficient with those tools Leaders of far-flung teams maximize the time spent together – getting together takes effort, time and money, so leaders tend to filter out distractions when teams do get together. These points made me happy because I’ve seen the same things play out in my team located around the world. And I’m not saying that a virtual team is more effective than a co-located team – but my virtual team doesn’t have the option of filing into a conference room for a face-to-face meeting whenever we want. Instead, we have to figure out how to work effectively without meeting face-to-face. Am I more engaged as a remote worker? I’d like to think that I am. I’ve been on calls with colleagues at 3am – this would never happen if my only option was to be in the office. I can leave my “office” to pick up my kids from school…and I’m willingly back online after kids are in bed to finish up anything I need to. Oracle Social Network lets me use my iPad to engage with my teammates when I’m waiting at music lessons, the doctor’s office or any place else with a network connection. I feel like I’m more connected with my team, and I feel like I’m more connected with my family life. So yes, I am a remote worker, and I am engaged. If you lead a virtual team, I challenge you to increase the ways that you communicate to effectively engage your team. If you are on a virtual team, I challenge you to think about how you might interact with team members to keep both them and yourself engaged in your work. And if you have some great ideas on how to make virtual teams (and workers) effective and engaged, please share those ideas in the comments! Now, if you’ll excuse me, I need to go get a bon-bon...   :) Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • Atheros AR2413 wireless not working after shutdown

    - by Chandrasekhar
    I am using a Ubuntu 11.04 on an Acer aspire 3680 laptop and my wifi is not working. I followed the below commands to install the madwifi driver: sudo su apt-get install subversion cd /usr/src svn checkout http://madwifi-project.org/svn/madwifi/trunk madwifi tar cfvz madwifi.tgz cd madwifi make && make install echo "blacklist ath5k" /etc/modprobe.d/blacklist.conf echo "ath_pci" /etc/modules modprobe ath_pci sudo reboot After installation I am facing the same problem. My wifi wont work after I shutdown. Infact it didn't work after suspend but I rectified that problem by the following commands: Command 1: sudo rmmod -f ath_pci sudo rfkill unblock all sudo modprobe ath_pci along with the command SUSPEND_MODULES=ath_pci added to the /etc/pm/config.d/madwifi directory. So if I suspend and then on my laptop the wifi loads well and doesn't create a problem. But if I shutdown my laptop the wifi never loads again and eachtime I have to run a Ubuntu 9.04 live CD to load it. I did try adding the Command 1 to the /etc/rc.local directory but still it doesn't work. So my question is: What should I do in order to make my wireless work without having to run a live CD of ubuntu 9.04 everytime after shutdown? Thanks. Here are the outputs which one might need: Output 1 chandru@chandru-acer:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02) 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8038 PCI-E Fast Ethernet Controller (rev 14) 0a:03.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01) 0a:09.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 0a:09.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) Output 2: lsmod Module Size Used by wlan_tkip 17074 2 binfmt_misc 13213 1 parport_pc 32111 0 ppdev 12849 0 snd_hda_codec_si3054 12924 1 snd_hda_codec_realtek 255882 1 joydev 17322 0 snd_atiixp_modem 18624 0 snd_via82xx_modem 18305 0 snd_intel8x0m 18493 0 snd_ac97_codec 105614 3 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m snd_hda_intel 24113 2 ac97_bus 12642 1 snd_ac97_codec snd_hda_codec 90901 3 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel i915 451053 3 snd_hwdep 13274 1 snd_hda_codec snd_pcm 80042 7 snd_hda_codec_si3054,snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 snd_rawmidi 25269 1 snd_seq_midi drm_kms_helper 40971 1 i915 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51291 2 snd_seq_midi,snd_seq_midi_event pcmcia 39671 0 snd_timer 28659 2 snd_pcm,snd_seq snd_seq_device 14110 3 snd_seq_midi,snd_rawmidi,snd_seq drm 184164 4 i915,drm_kms_helper yenta_socket 27230 0 tifm_7xx1 12898 0 wlan_scan_sta 21945 1 ath_rate_sample 17279 1 pcmcia_rsrc 18292 1 yenta_socket psmouse 73312 0 tifm_core 15040 1 tifm_7xx1 snd 55295 18 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device serio_raw 12990 0 i2c_algo_bit 13184 1 i915 soundcore 12600 1 snd pcmcia_core 21505 3 pcmcia,yenta_socket,pcmcia_rsrc video 19112 1 i915 ath_pci 183044 0 snd_page_alloc 14073 5 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_hda_intel,snd_pcm wlan 224640 5 wlan_tkip,wlan_scan_sta,ath_rate_sample,ath_pci ath_hal 398701 3 ath_rate_sample,ath_pci lp 13349 0 parport 36746 3 parport_pc,ppdev,lp usbhid 41704 0 hid 77084 1 usbhid sky2 49172 0 Output 3 root@chandru-acer:~# lshw -C network PCI (sysfs) *-network description: Ethernet interface product: 88E8038 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 14 serial: 00:16:36:fb:aa:64 capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.28 firmware=N/A latency=0 link=no multicast=yes port=twisted pair resources: irq:43 memory:44000000-44003fff ioport:2000(size=256) *-network description: Wireless interface product: AR2413 802.11bg NIC vendor: Atheros Communications Inc. physical id: 3 bus info: pci@0000:0a:03.0 logical name: wifi0 version: 01 serial: 00:19:7d:d3:0c:fd width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list logical ethernet physical wireless configuration: broadcast=yes driver=ath_pci ip=192.168.1.6 latency=96 maxlatency=28 mingnt=10 multicast=yes wireless=IEEE 802.11g resources: irq:18 memory:d0000000-d000ffff Output 4 root@chandru-acer:~# lsmod | grep ath_pci ath_pci 183044 0 wlan 224640 5 wlan_tkip,wlan_scan_sta,ath_rate_sample,ath_pci ath_hal 398701 3 ath_rate_sample,ath_pci

    Read the article

  • CPU Usage in Very Large Coherence Clusters

    - by jpurdy
    When sizing Coherence installations, one of the complicating factors is that these installations (by their very nature) tend to be application-specific, with some being large, memory-intensive caches, with others acting as I/O-intensive transaction-processing platforms, and still others performing CPU-intensive calculations across the data grid. Regardless of the primary resource requirements, Coherence sizing calculations are inherently empirical, in that there are so many permutations that a simple spreadsheet approach to sizing is rarely optimal (though it can provide a good starting estimate). So we typically recommend measuring actual resource usage (primarily CPU cycles, network bandwidth and memory) at a given load, and then extrapolating from those measurements. Of course there may be multiple types of load, and these may have varying degrees of correlation -- for example, an increased request rate may drive up the number of objects "pinned" in memory at any point, but the increase may be less than linear if those objects are naturally shared by concurrent requests. But for most reasonably-designed applications, a linear resource model will be reasonably accurate for most levels of scale. However, at extreme scale, sizing becomes a bit more complicated as certain cluster management operations -- while very infrequent -- become increasingly critical. This is because certain operations do not naturally tend to scale out. In a small cluster, sizing is primarily driven by the request rate, required cache size, or other application-driven metrics. In larger clusters (e.g. those with hundreds of cluster members), certain infrastructure tasks become intensive, in particular those related to members joining and leaving the cluster, such as introducing new cluster members to the rest of the cluster, or publishing the location of partitions during rebalancing. These tasks have a strong tendency to require all updates to be routed via a single member for the sake of cluster stability and data integrity. Fortunately that member is dynamically assigned in Coherence, so it is not a single point of failure, but it may still become a single point of bottleneck (until the cluster finishes its reconfiguration, at which point this member will have a similar load to the rest of the members). The most common cause of scaling issues in large clusters is disabling multicast (by configuring well-known addresses, aka WKA). This obviously impacts network usage, but it also has a large impact on CPU usage, primarily since the senior member must directly communicate certain messages with every other cluster member, and this communication requires significant CPU time. In particular, the need to notify the rest of the cluster about membership changes and corresponding partition reassignments adds stress to the senior member. Given that portions of the network stack may tend to be single-threaded (both in Coherence and the underlying OS), this may be even more problematic on servers with poor single-threaded performance. As a result of this, some extremely large clusters may be configured with a smaller number of partitions than ideal. This results in the size of each partition being increased. When a cache server fails, the other servers will use their fractional backups to recover the state of that server (and take over responsibility for their backed-up portion of that state). The finest granularity of this recovery is a single partition, and the single service thread can not accept new requests during this recovery. Ordinarily, recovery is practically instantaneous (it is roughly equivalent to the time required to iterate over a set of backup backing map entries and move them to the primary backing map in the same JVM). But certain factors can increase this duration drastically (to several seconds): large partitions, sufficiently slow single-threaded CPU performance, many or expensive indexes to rebuild, etc. The solution of course is to mitigate each of those factors but in many cases this may be challenging. Larger clusters also lead to the temptation to place more load on the available hardware resources, spreading CPU resources thin. As an example, while we've long been aware of how garbage collection can cause significant pauses, it usually isn't viewed as a major consumer of CPU (in terms of overall system throughput). Typically, the use of a concurrent collector allows greater responsiveness by minimizing pause times, at the cost of reducing system throughput. However, at a recent engagement, we were forced to turn off the concurrent collector and use a traditional parallel "stop the world" collector to reduce CPU usage to an acceptable level. In summary, there are some less obvious factors that may result in excessive CPU consumption in a larger cluster, so it is even more critical to test at full scale, even though allocating sufficient hardware may often be much more difficult for these large clusters.

    Read the article

  • What's My Problem? What's Your Problem?

    - by Jacek Ziabicki
    Software installers are not made for building demo environments. I can say this much after 12 years (on and off) of supporting my fellow sales consultants with environments for software demonstrations. When we release software, we include installation programs and procedures that are designed for use by our clients – to build a production environment and a limited number of testing, training and development environments. Different Objectives Your priorities when building an environment for client use vs. building a demo environment are very different. In a production environment, security, stability, and performance concerns are paramount. These environments are built on a specific server and rarely, if ever, moved to a different server or different network address. There is typically just one application running on a particular server (physical or virtual). Once built, the environment will be used for months or years at a time. Because of security considerations, the installation program wants to make these environments very specific to the organization using the software and the use case, encoding a fully qualified name of the server, or even the IP address on the network, in the configuration. So you either go through the installation procedure for each environment, or learn how to clone and reconfigure the software as a separate instance to build all your non-production environments. This may not matter much if the installation is as simple as clicking on the Setup program. But for enterprise applications, you have a number of configuration settings that you need to get just right – so whether you are installing from scratch or reconfiguring an existing installation, this requires both time and expertise in the particular piece of software. If you need a setup of several applications that are integrated to talk to one another, it is a whole new level of complexity. Now you need the expertise in all of the applications involved (plus the supporting technology products), and in addition to making each application work, you also have to configure the integration endpoints. Each application needs the URLs and credentials to call the integration layer, and the integration must be able to call each application. Then you have to make sure that each app has the right data so a business process initiated in one application can continue in the next. And, you will need to check that each application has the correct version and patch level for the integration to work. When building demo environments, your #1 concern is agility. If you can get away with a small number of long-running environments, you are lucky. More likely, you may get a request for a dedicated environment for a demonstration that is two weeks away: how quickly can you make this available so we still have the time to build the client-specific data? We are running a hands-on workshop next month, and we’ll need 15 instances of application X environment so each student can have a separate server for the exercises. We cannot connect to our data center from the client site, the client’s security policy won’t allow our VPN to go through – so we need a portable environment that we can bring with us. Our consultants need to be able to work at the hotel, airport, and the airplane, so we really want an environment that can run on a laptop. The client will need two playpen environments running in the cloud, accessible from their network, for a series of workshops that start two weeks from now. We have seen all of these scenarios and more. Here you would be much better served by a generic installation that would be easy to clone. Welcome to the Wonder Machine The reason I started this blog is to share a particular design of a demo environment, a special way to install software, that can address the above requirements, even for integrated setups. This design was created by a team at Oracle Utilities Global Business Unit, and we are using this setup for most of our demo environments. In a bout of modesty we called it the Wonder Machine. Over the next few posts – think of it as a novel in parts – I will tell you about the big idea, how it was implemented and what you can do with it. After we have laid down the groundwork, I would like to share some tips and tricks for users of our Wonder Machine implementation, as well as things I am learning about building portable, cloneable environments. The Wonder Machine is by no means a closed specification, it is under active development! I am hoping this blog will be of interest to two groups of readers – the users of the Wonder Machine we have built at Oracle Utilities, who want to get the most out of their demo environments and be able to reconfigure it to their needs – and to people who need to build environments for demonstration, testing, training, development and would like to make them cloneable and portable to maximize the reuse of their effort. Surely we are not the only ones facing this problem? If you can think of a better way to solve it, or if you can help us improve on our concept, I will appreciate your comments!

    Read the article

  • Synergy - easy share of keyboard and mouse between multiple computers

    Did you ever have the urge to share one set of keyboard and mouse between multiple machines? If so, please read on... Using multiple machines Honestly, as a software craftsman it is my daily business to run multiple machines - either physical or virtual - to be able to solve my customers' requirements. Recent hardware equipment allows this very easily. For laptops it's a no-brainer to attach a second or even a third screen in order to extend your native display. This works quite handy and in my case I used to attached two additional screens - one via HD15 connector, the other via HDMI. But... as it's a laptop and therefore a mobile unit there are slight restrictions. Detaching and re-attaching all cables when changing locations is one of them but hardware limitations, too. After all, it's a laptop and not a workstation. I guess, that anyone working in IT (or ICT) has more than one machine at their workplace or their home office and at least I find it quite annoying to have multiple sets of keyboard and mouse conquering my remaining space on my desk. Despite the ugly looks of all those cables and whatsoever 'chaos of distraction' I prefer a more clean solution and working environment. This allows me to actually focus on my work and tasks to do rather than to worry about choosing the right combination of keyboard/mouse. My current workplace is a patch work of various pieces of hardware (approx. 2-3 years): DIY desktop on Ubuntu 12.04 64-bit, Core2 Duo (E7400, 2.8GHz), 4GB RAM, 2x 250GB HDD, nVidia GPU 512MB Dell Inspiron 1525 on Windows 8 64-bit, 4GB RAM, 200GB HDD HP Compaq 6720s on Windows Vista 32-bit, Core2 Duo (T5670, 1.8GHz), 2GB RAM, 160GB HDD Mac mini on Mac OS X 10.7, Core i5 (2.3 GHz), 2GB RAM, 500GB HDD I know... Not the latest and greatest but a decent combination to work with. New system(s) is/are already on the shopping list but I live in the 'wrong' country to buy computer hardware. So, the next trip abroad will provide me with some new stuff. Using multiple operating systems The list of hardware above already names different operating systems, and actually I have only one preference: Linux. But still my job as a software craftsman for Visual FoxPro and .NET development requires other OSes, too. Not a big deal, it's just like this. Additionally to those physical machines, there are a bunch of virtual machines around. Most of them running either Windows XP or Windows 7. Since years I have the practice that each development for one customer is isolated into its own virtual machine and environment. This keeps it clean and version-safe. But as you can easily imagine with that setup there are a couple of constraints referring to keyboard and mouse. Usually, those systems require their own pieces of hardware attached. As stated, I don't like clutter on my desk's surface, so a cross-platform solution has to come in here. In the past, I tried it with various applications, hardware or network protocols like X11, RDP, NX, TeamViewer, RAdmin, KVM switch, etc. but the problem in this case is that they either allow you to remotely connect to the other system or exclusively 'bind' your peripherals to the active system. Not optimal after all. Synergy to the rescue Quote from their website: "Synergy lets you easily share your mouse and keyboard between multiple computers on your desk, and it's Free and Open Source. Just move your mouse off the edge of one computer's screen on to another. You can even share all of your clipboards. All you need is a network connection. Synergy is cross-platform (works on Windows, Mac OS X and Linux)." Yep, that's it! All I need for my setup here... Actually, I couldn't believe it myself that I didn't stumble over synergy earlier but 'Get over it' and there we go. And despite the fact that it is Open Source, no, it's also for free. Donations for the developers are very welcome and recently they introduced Synergy Premium. A possibility to buy so-called premium votes that can be used to put more weight / importance on specific issues or bugs that you would like the developers to look into. Installation and configuration Simply download the installation packages for your systems of choice, run the installer and enter some minor information about your network setup. I chose my desktop machine for the role of the Synergy server and configured my screen setup as follows: The screen setup allows you currently to build or connect up to 15 machines. The number of screens can be higher as those machine might have multiple screens physically attached. Synergy takes this into the overall calculations and simply works as expected. I tried it for fun with a second monitor each connected to both laptops to have a total number of 6 active screens. No flaws after all - stunning! All the other machines are configured as clients like so: Side note: The screenshot was taken on Windows 8 and pasted via clipboard into Gimp running on Ubuntu. Resume Synergy is now definitely in my box of tools for my daily work, and amongst the first pieces of software I install after the operating system. It just simplifies my life and cleans my desk. Never again without Synergy!Now, only waiting for an Android version to integrate my Galaxy Tab 10.1, too. ;-) Please, check out that superb product and enjoy sharing one keyboard, one mouse and one clipboard between your various machines and operating systems.

    Read the article

  • Identity Globe Trotters (Sep Edition): The Social Customer

    - by Tanu Sood
    Welcome to the inaugural edition of our monthly series - Identity Globe Trotters. Starting today, the last Friday of every month, we will explore regional commentary on Identity Management. We will invite guest contributors from around the world to share their opinions and experiences around Identity Management and highlight regional nuances, specific drivers, solutions and more. Today's feature is contributed by Michael Krebs, Head of Business Development at esentri consulting GmbH, a (SOA) specialized Oracle Gold Partner based in Ettlingen, Germany. In his current role, Krebs is dealing with the latest developments in Enterprise Social Networking and the Integration of Social Media within business processes.  By Michael Krebs The relevance of "easy sign-on" in the age of the "Social Customer" With the growth of Social Networks, the time people spend within those closed "eco-systems" is growing year by year. With social networks looking to integrate search engines, like Facebook announced some weeks ago, their relevance will continue to grow in contrast to the more conventional search engines. This is one of the reasons why social network accounts of the users are getting more and more like a virtual fingerprint. With the growing relevance of social networks the importance of a simple way for customers to get in touch with say, customer care or contract departments, will be crucial for sales processes in critical markets. Customers want to have one single point of contact and also an easy "login-method" with no dedicated usernames, passwords or proprietary accounts. The golden rule in the future social media driven markets will be: The lower the complexity of the initial contact, the better a company can profit from social networks. If you, for example, can generate a smart way of how an existing customer can use self-service portals, the cost in providing phone support can be lowered significantly. Recruiting and Hiring of "Digital Natives" Another particular example is "social" recruiting processes. The so called "digital natives" don´t want to type in their profile facts and CV´s in proprietary systems. Why not use the actual LinkedIn profile? In German speaking region, the market in the area of professional social networks is dominated by XING, the equivalent to LinkedIn. A few weeks back, this network also opened up their interfaces for integrating social sign-ons or the usage of profile data for recruiting-purposes. In the European (and especially the German) employment market, where the number of young candidates is shrinking because of the low birth rate in the region, it will become essential to use social-media supported hiring processes to find and on-board the rare talents. In fact, you will see traditional recruiting websites integrated with social hiring to attract the best talents in the market, where the pool of potential candidates has decreased dramatically over the years. Identity Management as a key factor in the Customer Experience process To create the biggest value for customers and also future employees, companies need to connect their HCM or CRM-systems with powerful Identity management solutions. With the highly efficient Oracle (social & mobile enabling) Identity Management solution, enterprises can combine easy sign on with secure connections to the backend infrastructure. This combination enables a "one-stop" service with personalized content for customers and talents. In addition, companies can collect valuable data for the enrichment of their CRM-data. The goal is to enrich the so called "Customer Experience" via all available customer channels and contact points. Those systems have already gained importance in the B2C-markets and will gradually spread out to B2B-channels in the near future. Conclusion: Central and "Social" Identity management is key to Customer Experience Management and Talent Management For a seamless delivery of "Customer Experience Management" and a modern way of recruiting the best talent, companies need to integrate Social Sign-on capabilities with modern CX - and Talent management infrastructure. This lowers the barrier for existing and future customers or employees to get in touch with sales, support or human resources. Identity management is the technology enabler and backbone for a modern Customer Experience Infrastructure. Oracle Identity management solutions provide the opportunity to secure Social Applications and connect them with modern CX-solutions. At the end, companies benefit from "best of breed" processes and solutions for enriching customer experience without compromising security. About esentri: esentri is a provider of enterprise social networking and brings the benefits of social network communication into business environments. As one key strength, esentri uses Oracle Identity Management solutions for delivering Social and Mobile access for Oracle’s CRM- and HCM-solutions. …..End Guest Post…. With new and enhanced features optimized to secure the new digital experience, the recently announced Oracle Identity Management 11g Release 2 enables organizations to securely embrace cloud, mobile and social infrastructures and reach new user communities to help further expand and develop their businesses. Additional Resources: Oracle Identity Management 11gR2 release Oracle Identity Management website Datasheet: Mobile and Social Access (pdf) IDM at OOW: Focus on Identity Management Facebook: OracleIDM Twitter: OracleIDM We look forward to your feedback on this post and welcome your suggestions for topics to cover in Identity Globe Trotters. Last Friday, every month!

    Read the article

  • Can't control connection bit rate using iwconfig with Atheros TL-WN821N (AR7010)

    - by Paul H
    I'm trying to reduce the connection bit rate on my Atheros TP-Link TL-WN821N v3 usb wifi adapter due to frequent instability issues (reported connection speed goes down to 1Mb/s and I have to physically reconnect the adapter to regain a connection). I know this is a common problem with this device, and I have tried everything I can think of to fix it, including using drivers from linux-backports; compiling and installing a custom firmware (following instructions on https://wiki.debian.org/ath9k_htc#fw-free) and (as a last resort) using ndiswrapper. When using ndiswrapper, the wifi adapter is stable and operates in g mode at 54Mb/s (whilst when using the default ath9k_htc module, the adapter connects in n mode and the bit rate fluctuates constantly). Unfortunately, with this setup I have to run my processor using only one core, since using SMP with ndiswrapper causes a kernel oops on my system. So I want to lock my bit rate to 54Mb/s (or less, if need be) for connection stability, using the ath9k_htc module. I've tried 'sudo iwconfig wlan0 rate 54M'; the command runs with no error but when I check the bit rate with 'sudo iwlist wlan0 bitrate' the command returns: wlan0 unknown bit-rate information. Current Bit Rate:78 Mb/s Any ideas? Here's some info (hopefully relevant) on my setup: Xubuntu (12.04.3) 64bit (kernel 3.2.0-55.85-generic) using Network Manager. My Router is from Virgin Media, the VMDG480. lshw -C network : *-network description: Wireless interface physical id: 1 bus info: usb@1:4 logical name: wlan0 serial: 74:ea:3a:8f:16:b6 capabilities: ethernet physical wireless configuration: broadcast=yes driver=ath9k_htc driverversion=3.2.0-55 firmware=1.3 ip=192.168.0.9 link=yes multicast=yes wireless=IEEE 802.11bgn lsusb -v: Bus 001 Device 003: ID 0cf3:7015 Atheros Communications, Inc. TP-Link TL-WN821N v3 802.11n [Atheros AR7010+AR9287] Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 idVendor 0x0cf3 Atheros Communications, Inc. idProduct 0x7015 TP-Link TL-WN821N v3 802.11n [Atheros AR7010+AR9287] bcdDevice 2.02 iManufacturer 16 ATHEROS iProduct 32 UB95 iSerial 48 12345 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 60 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 6 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x06 EP 6 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) iwlist wlan0 scanning: wlan0 Scan completed : Cell 01 - Address: C4:3D:C7:3A:1F:5D Channel:1 Frequency:2.412 GHz (Channel 1) Quality=37/70 Signal level=-73 dBm Encryption key:on ESSID:"my essid" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s Mode:Master Extra:tsf=00000070cca77186 Extra: Last beacon: 5588ms ago IE: Unknown: 0007756E69636F726E IE: Unknown: 010882848B962430486C IE: Unknown: 030101 IE: Unknown: 2A0100 IE: Unknown: 2F0100 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: 32040C121860 IE: Unknown: 2D1AFC181BFFFF000000000000000000000000000000000000000000 IE: Unknown: 3D1601080400000000000000000000000000000000000000 IE: Unknown: DD7E0050F204104A0001101044000102103B00010310470010F99C335D7BAC57FB00137DFA79600220102100074E657467656172102300074E6574676561721024000631323334353610420007303030303030311054000800060050F20400011011000743473331303144100800022008103C0001011049000600372A000120 IE: Unknown: DD090010180203F02C0000 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00 iwconfig: lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"my essid" Mode:Managed Frequency:2.412 GHz Access Point: C4:3D:C7:3A:1F:5D Bit Rate=78 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=36/70 Signal level=-74 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0,

    Read the article

  • Linux - serial port read returning EAGAIN...

    - by Andre
    Hello all! I am having some trouble reading some data from a serial port I opened the following way. I've used this instance of code plenty of times and all worked fine, but now, for some reason that I cant figure out, I am completely unable to read anything from the serial port. I am able to write and all is correctly received on the other end, but the replies (which are correctly sent) are never received (No, the cables are all ok ;) ) The code I used to open the serial port is the following: fd = open("/dev/ttyUSB0", O_RDWR | O_NONBLOCK | O_NOCTTY); if (fd == -1) { Aviso("Unable to open port"); return (fd); } else { //Get the current options for the port... bzero(&options, sizeof(options)); /* clear struct for new port settings */ tcgetattr(fd, &options); /*-- Set baud rate -------------------------------------------------------*/ if (cfsetispeed(&options, SerialBaudInterp(BaudRate))==-1) perror("On cfsetispeed:"); if (cfsetospeed(&options, SerialBaudInterp(BaudRate))==-1) perror("On cfsetospeed:"); //Enable the receiver and set local mode... options.c_cflag |= (CLOCAL | CREAD); options.c_cflag &= ~PARENB; /* Parity disabled */ options.c_cflag &= ~CSTOPB; options.c_cflag &= ~CSIZE; /* Mask the character size bits */ options.c_cflag |= SerialDataBitsInterp(8); /* CS8 - Selects 8 data bits */ options.c_cflag &= ~CRTSCTS; // disable hardware flow control options.c_iflag &= ~(IXON | IXOFF | IXANY); // disable XON XOFF (for transmit and receive) options.c_cflag |= CRTSCTS; /* enable hardware flow control */ options.c_cc[VMIN] = 0; //min carachters to be read options.c_cc[VTIME] = 0; //Time to wait for data (tenths of seconds) //Set the new options for the port... tcflush(fd, TCIFLUSH); if (tcsetattr(fd, TCSANOW, &options)==-1) { perror("On tcsetattr:"); } PortOpen[ComPort] = fd; } return PortOpen[ComPort]; After the port is initializeed I write some stuff to it through simple write command... int nc = write(hCom, txchar, n); where hCom is the file descriptor (and it's ok), and (as I said) this works. But... when I do a read afterwards, I get a "Resource Temporarily Unavailable" error from errno. I tested select to see when the file descriptor had something t read... but it always times out! I read data like this: ret = read(hCom, rxchar, n); and I always get an EAGAIN and I have no idea why. All help would be appreciated. Cheers

    Read the article

  • UIPopoverController. Is there way to use Interface Builder to layout the VC and View it Contains?

    - by dugla
    Since UIPopoverController is often a container for a non-trivial amount of view hierarchy, it would be nice to do the layout of the VC and View it contains in Interface Builder rather then programmatically. Has anyone found a good work flow for do this? For example I want to embed a UIScrollView in a UIPopoverController and I am not excited about having to do it all programmatically. Thanks in advance. Cheers, Doug

    Read the article

  • Some help needed with setting up the PERFECT workflow for web development with 2-3 guys using subver

    - by Roeland
    Hey guys! I run a small web development company along side with my brother and friend. After doing extensive research I have decided on using subversion for version control. Here is how I currently plan on running typical development. Keep in mind there are 3 of us each in a separate location. I set up an account with springloops (springloops.com) subversion hosting. Each time I work on a new project, I create a repository for it. So lets say in this case I am working on site1. I want to have 3 versions of the site on the internet: Web Development - This is the server me and the other developers publish to. (site1.dev.bythepixel.com) Client Preview - This is the server that we update every few days with a good revision for the client to see. (site1.bythepixel.com) Live Site - The site I publish to when going live (site1.com) Each web development machine (at each location) will have a local copy of xamp running virtual host to allow multiple websites to be worked on. The root of the local copy is set up to be the same as the local copy of the subversion repository. This is set up so we can make small tweaks and preview them immediately. When some work has been done, a commit is made to the repository for the site. I will have the dev site automatically be pushed (its an option in springloops). Then, whenever I feel ready to push to the client site I will do so. Now, I have a few concerns with those work flow: I am using codeigniter currently, and in the config file I generally set the root of the site. Ex. http://www.site1.com. So, it looks like each time I publish to one of the internet servers, I will have to modify the config file? Is there any way to make it so certain files are set for each server? So when I hit publish to client preview it just uploads the config file for the client preview server. I don't want the live site , the client preview site and the dev site to share the same mysql server for a variety of reasons. So does this once again mean that I have to adjust the db server info each time I push to a different site? Does this workflow make sense? If you have any suggestion please let me know. I plan for this to be the work flow I use for the next few year. I just need to put a system in place that allows for future expansion! Thanks a bunch!!

    Read the article

  • Is there a way to add a column with buttons in jqGrid

    - by josh
    I have some data that I'd like to display in jqqgrid. In addition to add, edit, and delete, there are other actions that can be taken on a selected record. I like the flow of having a button/link for that action in that record's row. Is there a way to add a column & buttons/links within jqgrid which isn't bound to data?

    Read the article

  • SSIS how to split a single record in to two different records?

    - by Dr. Zim
    I have a Product record that has multiple "zoned" prices, one for each store that sells the product. ProductID int Name string PriceA money PriceB money PriceC money In SQL Server Integration Services, I need to split this in to multiple records: ProductID int Version string // A, B, or C Price money // PriceA if A, PriceB if B, etc. This would be within a Data Flow, I presume as a Transformation between Excel source and OLE DB destination. (Assuming OLE DB is a good destination for MS SQL server).

    Read the article

  • Objective-C wrapper API design methodology

    - by Wade Williams
    I know there's no one answer to this question, but I'd like to get people's thoughts on how they would approach the situation. I'm writing an Objective-C wrapper to a C library. My goals are: 1) The wrapper use Objective-C objects. For example, if the C API defines a parameter such as char *name, the Objective-C API should use name:(NSString *). 2) The client using the Objective-C wrapper should not have to have knowledge of the inner-workings of the C library. Speed is not really any issue. That's all easy with simple parameters. It's certainly no problem to take in an NSString and convert it to a C string to pass it to the C library. My indecision comes in when complex structures are involved. Let's say you have: struct flow { long direction; long speed; long disruption; long start; long stop; } flow_t; And then your C API call is: void setFlows(flow_t inFlows[4]); So, some of the choices are: 1) expose the flow_t structure to the client and have the Objective-C API take an array of those structures 2) build an NSArray of four NSDictionaries containing the properties and pass that as a parameter 3) create an NSArray of four "Flow" objects containing the structure's properties and pass that as a parameter My analysis of the approaches: Approach 1: Easiest. However, it doesn't meet the design goals Approach 2: For some reason, this seems to me to be the most "Objective-C" way of doing it. However, each element of the NSDictionary would have to be wrapped in an NSNumber. Now it seems like we're doing an awful lot just to pass the equivalent of a struct. Approach 3: Seems the cleanest to me from an object-oriented standpoint and the extra encapsulation could come in handy later. However, like #2, it now seems like we're doing an awful lot (creating an array, creating and initializing objects) just to pass a struct. So, the question is, how would you approach this situation? Are there other choices I'm not considering? Are there additional advantages or disadvantages to the approaches I've presented that I'm not considering?

    Read the article

  • Drools JEE Application

    - by Anderson
    Anyone build a JEE application using Drools?. I'm not found any example of application tha use drools, EJB, Jboss and JTA. I'm try to use drools-flow on my JEE project, and its break my project. His libraries (drools-process-task) has persitence.xml thats conflict with my persistence.xml. Help me please

    Read the article

  • Payment Gateway Integration asp.net c# 2.0

    - by mvkotekar
    Myself mendy, i am designing web application, The business required to integrate payment gateway. I searched on site regarding the flow but i could not get much info on MSDN. I want to make payment gateway using SSL and 3rd party merchant account. How can i do it ? some info regarding payment gateway could guid me to start developing the component.

    Read the article

  • For eBook which control i should use and how to start

    - by Aamir Khurshid
    Hi , i want to develop such an application through which i can read book ,currently i am using the Richtextbox in flow document,i dont want to use the scroll ,i prefer the navigation style i.e prev page next page start and end ,book may contains images tables so and so ,and how do i import books in my application How can i achieve? Regards, Aamir

    Read the article

  • Graph layouting with Perl

    - by jonny
    Ok, I have a flowchart definition (basically, array of nodes and edges for each node). Now I want to calculate coordinates for every task in the flow, preferably hierarchycal style. I need something like Graph::Easy::Layout but I have no idea how to get nodes coordinates: I render nodes myself and I only want to retrieve box coordinates/size. Any suggestions? What I need is a cpan module avialable even in Debian repository.

    Read the article

  • Should using Eval carry the same stigma as GoTo?

    - by JustSmith
    It is taught in every computer science class and written in many books that programmers should not use GoTo. There is even an xkcd comic about it. My question is have we reached a point where the same thing can be said about Eval? Where GoTo is not conductive for program flow and readability, Eval is the same for debugging, and program execution, and design. Should using Eval have the same stigma as GoTo, and same consequences as in the xkcd comic?

    Read the article

  • When does the .NET FormAuthentication ticket get checked and how do I tap into this event?

    - by Mustafakidd
    Hello everyone - We are attempting to integrate an ASP.NET MVC site with our client's SSO system using PingFederate. I would like to use the built in FormsAuthentication framework to do this. The way I've gone about it so far is: Set up my Web.config so that my FormsAuthentication LoginURL goes to my site's "BeginAuthentication" action on a "Security" controller. From this action, I set up some session variables (what URL was being accessed, for example, since Ping won't send this info back to me), and then redirect to our client's login page on an external site (www.client.com/Login for example). From here, the authentication takes place and a cookie is generated on the same domain as the one that our application is running on which contains the unique identifier of the authenticated user, I've set it up so that once this happens, the Ping server will redirect to my "EndAuthentication" action on my "Security" controller. In this action, I call my membership class's "ValidateUser" method which takes this unique identifier from the cookie and loads in the user on our application that this ID refers to. I save that logged in user in our Session (Session["LoggedInAs"], for example) and expire the cookie that contains the id of the authenticated user that the SSO system provided for me. All of this works well. The issue I'm wondering about is what happens after our user has already authenticated and manually goes back to our client's login page (www.client.com/login) and logs in as another user. If they do that, then the flow from #2 above to number 3 happens as normal - but since there already exists an authenticated user on our site, it seems as though the FormsAuthentication system doesn't bother kicking off anything so I don't get a chance to check for the cookie I'm looking for to login as this new user. What I'd like to do is, somewhere in my Global.asax file (probably FormsAuthenticate_OnAuthenticate), check to see if the cookie that the SSO system sends to me exists, and if so, sign out of the application using FormsAuthentication.SignOut(). Another issue that seems to be related is that if I let my Session expire, the FormsAuthentication still seems to think I am authenticated and it lets me access a page even though no currently logged in user exists in my Session, so the page doesn't render correctly. Should I tap into the Session_End event and do FormsAuthentication.SignOut() here as well? Basically, I want to know when the authentication ticket created by System.Web.Security.FormsAuthentication.SetAuthCookie(..) gets checked in the flow of a request so that I can determine whether I need to SignOut() and force revalidation or not. Thanks for any help. Sorry for the length of this message, trying to be as detailed as possible. Mustafa

    Read the article

  • Good tools for using Git on windows

    - by Ali Shafai
    I've been using SVN for my projects and had visualSVN for VS integration. however the Git work flow is different from traditional source control systems (Checkout/edit/stage/commit as oppose to Checkout/edit/commit). I was wondering if there is a good VS addon to support that. Also any good advice on using git on a windows dev machine is appreciated.

    Read the article

  • ASP.NET GridView EditTemplate and find control

    - by Geetha
    In the GridView we are using an edit button. Once the edit button is clicked Controls in the edit template will display in the same row with update button. That row has two dropdownlist controls. Process flow: controls:d1 and d2 d1 is using sqldatasource for item display : working fine. d2 is using codebehind code to load the item based on the selected value in the d1 : Not working How to find the control in the edit template to display item value for d2?

    Read the article

< Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >