Search Results

Search found 20043 results on 802 pages for 'password assistant mac'.

Page 364/802 | < Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >

• Any way to know if two ip address points to the same machine?

  - by Vivek V K

  Is there anyway to find if two different IP address in two different network actually points to the same physical device? I need it in Linux. Edit - I have the same server(a raspberry pi) connected via 2 intranets to my client. I don't know the IP address of the server as it is DHCP. The crude way to do is to reach the raspberry pi from one intranet and check with ifconfig to find the ipadress of the machine in the other Intranet. I want to know if there is any other way I can do it? I know the mac address of the machine.But I don't know how do I find the Ipadress based on the mac address.

  Read the article

• Bridge virtual machines out WLAN interface

  - by Thomas

  It seems that my wlan card (intel 5100 AGN) firmware doesn't allow "spoofing" MAC addresses. This has the side effect of destroying the capability to bridge out my virtual machines on that interface. Apparently this is a common thing on wlan cards. I can see the incoming traffic just fine in my virtual machines, but their DHCP queries don't get bridged out of the WLAN card. It works perfectly well when using the wired ethernet port. Is there a workaround for this? MAC-NAT or something? I don't want to route my virtual machines out to the Internet because I don't want my host OS to even have an IP address. I'm using Linux and KVM for virtualization.

  Read the article

• Can't find a Windows Explorer alternative that has FULL-TREE View

  - by samJL

  I cannot find a Windows Explorer alternative that has full-tree view functionality like Path Finder on the Mac This is the type of view I am looking for (screenshot of Path Finder on Mac): By full-tree I mean: A tree view that includes files in addition to folders, and can be operated as its own pane-- not as a shared pane or attached pane which is characteristic of Q-Dir. Q-Dir and most others simply stick a folder tree pane on to a file list pane, which is not as useful (think Ruby on Rails application or anything with MVC-- I want to be able to pop open folders in the tree and have them stay open as I work between them). I have tried xplorer2 XYplorer Nexus File Free Commander muCommander CubicExplorer Double Commander Q-Dir Explorer++ Unreal Commander wxCommander Power Desk Directory Opus Has anyone seen a Windows app that has a full-tree view? I can't believe such a simple feature is so hard to find Thanks

  Read the article

• AuthInfoRequired cups overwrites

  - by mooscape

  My problem is basically identical to the following: http://bbs.archlinux.org/viewtopic.php?id=61826 Put simply, I have a machine in ubuntu trying to connect to another ubuntu machine via a network in order to use the printer attached. There is no problem printing until I restart the guest machine. Immediately it overwrites the printers.conf file (under /etc/cups/printers.conf). It always adds the same line: AuthInfoRequired username,password I stop cups and change it to *#*AuthInfoRequired username,password to comment out the command. Start cups. Works great 'til the next shutdown. Then it gets overwritten again. Googling indicates it may be GTK problem and not CUPS, but I have found no permanent solution to date. Any suggestions appreciated ....

  Read the article

• How to protect an OS X Server from an anautorized physical connection?

  - by GJ

  Hi I have an OS X 10.6 server, which I administer via SSH and VNC (via SSH tunnel). I can't leave it at the login window since then VNC connections are refused. Therefore I currently leave it logged with my user account. Since it doesn't have a monitor attached, it doesn't go into screen saver mode, which means it doesn't require a password to retake control. This means it is very easy for anyone connecting a keyboard/mouse and monitor to take control of the system. The screen saver password protection, which I can't get to activate, unlike the system's login window, is perfectly compatible with VNC connections. How could I prevent such direct access to the server without connecting a monitor and without blocking my ability to connect with VNC? Thanks!

  Read the article

• Syncing contacts to iOS device with Exchange

  - by flackend

  I set up a Microsoft Exchange account on my iOS device to sync my Gmail contacts. But Microsoft Exchange is ignoring phone numbers that are labeled as 'iPhone' or 'main'. For example, John Smith: On Mac and Gmail: John Smith main: 123-334-1212 home: 123-330-1002 work: 123-330-8211 iPhone: 123-778-5556 On iOS device (via Exchange sync): John Smith home: 123-330-1002 work: 123-330-8211 I'd like to sync my contacts from my Mac to iCloud and Gmail, but you can't do both: Is there a solution to sync iOS and Gmail contacts without using Exchange? Thanks for any help!

  Read the article

• OpenBSD in a virtual box as a firewall

  - by Ali

  Is there any merit in installing a virtual machine with OpenBSD and pf (or any other simple and secure OS + iptable) on a mac laptop and routing all the traffic through that machine? I read a similar set up for corporate laptops running windows (I thing I read this in BSD magazine). They claim that Windows machines are too hard to secure and if you are taking them to the wild (public wireless, hotels, ...) you'd better but a secure OS in between! If you think this is a good idea, how you route all the traffic on a mac through the virtual machine and prevent any application or service to go directly? I am not sure if just setting the gateway will do that, what about DNS? you don't want anybody to fool you with DNS cache poisoning or similar attacks either.

  Read the article

• Simulating an UNC path with a leading dot

  - by Uwe Keim

  Being a C# .NET Windows Forms developer, some customers are running our applications on an Apple OS X Mac inside a Parallels virtual machine. Parallels presents host folders to the guest Windows as UNC paths with a leading dot like \\.psf\Home\Some\More\Folders Now an application of us cannot handle the leading dot correctly when accessing files from these kind of shares ("Invalid URI, cannot analyze host name" exception). I want to debug and fix this issue, unfortunately I do have no Mac and Parallels around here to test it. My question is: Is there a way to "simulate" this kind of share on a normal Windows server or client so that I'll be able to debug my application with Visual Studio? What I tried so far: I already tried to edit my HOSTS file to contain an entry like # ... 127.0.0.1 .psf # ... but Windows just seems to not recognize the share at all.

  Read the article

• How can I get 2560 * 1600 on Win 7 ? MacBook Pro 17 + Dell 30 inch 3008 WFP + Fusion 3

  - by Tarek Demiati

  I run VM Ware Fusion 3 on a Mac Book Pro 17 hooked to a Dell 30 inch screen I CAN manage to get a Resolution of 2560 * 1600 on Mac OS X(MacBook Pro), but can't on Win 7 (on the exact same MacBook Pro) The highest resolution I can get on MS Win 7 is 2048 * 1536 (and I want to be able to set it to 2560 * 1600 to fully enjoy the real estate of my 30 inch screen!) I have searched the KB, and found an article which mentionned that I should add the following lines in the vmx file (which I did) The lines are the very bottom of the vmx file svga.maxWidth = "2560" svga.maxHeight = "1600" svga.vramSize = "16384000" KB Article : http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1003&sliceId=1&docTypeID=DT_KB_1_1&dialogID=63746028&stateId=0%200%2066741566 I did the manipulation describe in the KB above however, I rebooted several times, but I still can't get the correct resolution to show in Windows

  Read the article

• Cloud based backup solutions based on open standards?

  - by Rick

  I am looking for a solution to backup and consolidate important media from a couple Windows laptops and Mac laptop. I would like a solutions that based on open standards, so my data isn't trapped by proprietary formats and proprietary protocols. I would like the ability to switch clients or change providers in the future. For example, something like Jungle Disk plus S3 sounds like a great option. However, I am having trouble confirming how or if this can be setup meeting this criteria. Are there any real or de-facto standards for treating S3 as a filesystem? If so, what Windows and Mac clients support these standards?

  Read the article

• Apple RAID configuration vs Hardware RAID

  - by James Hill

  I am researching external HDD's capable or RAID 1 to store a large amount of video content during overseas filming. After filming, the content will be brought back to the office and offloaded onto our storage server. After doing some research, I've found that I can buy an external drive with a built in RAID controller, or I can buy an external drive, with 2 HDD's, that I can configure in a RAID 1 array using the OS. RAID 1 is what we're looking for. I've done some reading on software RAID vs. hardware RAID, but the resources I've found don't discuss performance as it relates to video content or what happens to a software RAID when the computer dies. Question 1: Will the hardware RAID be more performant when dealing with large video files? Question 2: If the mac dies, does my RAID die with it (will my data be accessible on another mac)?

  Read the article

• Firewall to block traffic to specific websites

  - by Ctroy

  I have recently switched from MAC to Windows Vista. I used to have LittleSnitch on Mac where I can create filters and disable browsing to other websites. I mean, I can create filters so that LittleSnitch will not send traffic to specific websites like Google Analytics etc. However, I cannot find a similar software on Windows. I tried Zone Alarm firewall, but it doesn't let you add filters to stop traffic to specific websites. Are there any software available on windows which are similar to LittleSnitch?

  Read the article

• How do I disable the fade out/fade in effect when unlocking a WIndows 7 workstation?

  - by Timwi

  When I press Win+L, the “Locked” screen (with the password prompt) appears immediately. That’s nice, but not terribly important: I’m probably leaving the computer anyway. But after I type the password (to unlock the workstation), the desktop doesn’t appear immediately: instead, the “Locked” screen slowly fades out, the desktop slowly fades in, wasting my time, and all keys (e.g. Win+R) pressed during this interval are completely swallowed, forcing me to wait unnecessarily. This is extremely annoying because when I unlock the workstation, I generally want to use my computer. How do I disable this fade out/fade in effect and have the desktop appear immediately, in the same way that the “Locked” screen appears immediately?

  Read the article

• Added user to CentOS, Updated sshd_config with AllowUsers, Login denied

  - by Gregg

  CentOS 5.3. I can SSH into the system as root just fine. Added a user and set their password. They have shell access (/bin/bash). I can su to the account from root just fine. I updated /etc/ssh/sshd_config with: AllowUsers myNewUser And restarted sshd: /etc/init.d/sshd restart When trying to ssh into the server with the new user, I get a permission denied. And yes, I've double and triple checked that I am using the correct password. Any help is appreciated.

  Read the article

• DFS-R (2008 and R2) 2 node server cluster, all file writes end in conflictAndDeleted

  - by Andrew Gauger

  Both servers in a 2 server cluster are reporting event 4412 20,000 times per day. If I sit in the conflictAndDetected folder I can observe files appearing and disappearing. Users report that their files saved by peers at the same location are overriding each other. The configuration began with a single server, then DFS-R was set up using the 2008 R2 wizard that set up the share on the second server. DFSN was set up independently. Windows users have drives mapped using domain based namespace (\domain.com\share). Mac users are pointed directly to the new server share created by DFS-R. It is PC users indicating most of the lost files, but there has been 2 reports by Mac users about files reverting.

  Read the article

• How to protect an OS X Server from an unauthorized physical connection?

  - by GJ

  Hi I have an OS X 10.6 server, which I administer via SSH and VNC (via SSH tunnel). I can't leave it at the login window since then VNC connections are refused. Therefore I currently leave it logged with my user account. Since it doesn't have a monitor attached, it doesn't go into screen saver mode, which means it doesn't require a password to retake control. This means it is very easy for anyone connecting a keyboard/mouse and monitor to take control of the system. The screen saver password protection, which I can't get to activate, unlike the system's login window, is perfectly compatible with VNC connections. How could I prevent such direct access to the server without connecting a monitor and without blocking my ability to connect with VNC? Thanks!

  Read the article

• Problem connecting to SSH in office network

  - by Jeune

  I have trouble connecting via SSH to a server whenever I am in the office. I get as far as being prompted for my password and then after that there's a long wait which always ends in a Write failed: Broken pipe This is only for connecting via SSH. I use svn to commit files to a repository hosted on the same server and there are no hitches. Furthermore, this only happens in our office. When I go the university or whenever I am at home or at the coffee shop I am able to connect seamlessly. There are no firewalls in our office. It's just a basic wireless router connected to a modem setup. It's the same setup I have at home and I guess the same setup in the coffee shop. What are the causes for a broken pipe and why does this phenomenon only happen when I try connect via SSH and not when I work with svn on the same server? Updated: Some debug logs after authentication: debug3: packet_send2: adding 48 (len 64 padlen 16 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env ORBIT_SOCKETDIR debug3: Ignored env SSH_AGENT_PID debug3: Ignored env TERM debug3: Ignored env SHELL debug3: Ignored env XDG_SESSION_COOKIE debug3: Ignored env WINDOWID debug3: Ignored env GNOME_KEYRING_CONTROL debug3: Ignored env GTK_MODULES debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env LIBGL_DRIVERS_PATH debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env DEFAULTS_PATH debug3: Ignored env SESSION_MANAGER debug3: Ignored env USERNAME debug3: Ignored env XDG_CONFIG_DIRS debug3: Ignored env DESKTOP_SESSION debug3: Ignored env LIBGL_ALWAYS_INDIRECT debug3: Ignored env PATH debug3: Ignored env PWD debug3: Ignored env GDM_KEYBOARD_LAYOUT debug1: Sending env LANG = en_PH.utf8 debug2: channel 0: request env confirm 0 debug3: Ignored env GNOME_KEYRING_PID debug3: Ignored env MANDATORY_PATH debug3: Ignored env GDM_LANG debug3: Ignored env GDMSESSION debug3: Ignored env SHLVL debug3: Ignored env HOME debug3: Ignored env GNOME_DESKTOP_SESSION_ID debug3: Ignored env LOGNAME debug3: Ignored env XDG_DATA_DIRS debug3: Ignored env DBUS_SESSION_BUS_ADDRESS debug3: Ignored env LESSOPEN debug3: Ignored env WINDOWPATH debug3: Ignored env DISPLAY debug3: Ignored env LESSCLOSE debug3: Ignored env XAUTHORITY debug3: Ignored env COLORTERM debug3: Ignored env OLDPWD debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 UPDATE 2011-14-07: I am able to connect to the server via SSH now. I didn't do anything but that's because there is no one in the office but me! Having said that, is it possible that it has something to do with the number of sessions an SSH server can handle? UPDATE 2011-14-07: I try to login via SSH through Putty on another machine running windows together with my current SSH session in Ubuntu and now it seems my SSH session in Ubuntu has been dropped. I can't type into the terminal. Is Putty the culprit now?

  Read the article

• lacp, cicso 3550, 3560, help with configuration

  - by Flamewires

  Hey all this is a repost from a question I asked on the cisco forums but never got a useful reply. Hey I'm trying to convert the FreeBSD servers at work to dual-gig lagg links from regular gigabit links. Our production servers are on a 3560. I have a small test environment on a 3550. I have achieved fail-over, but am having troubles achieving the speed increase. All servers are running gig intel (em) cards. The configs for the servers are: BSDServer: #!/bin/sh #bring up both interfaces ifconfig em0 up media 1000baseTX mediaopt full-duplex ifconfig em1 up media 1000baseTX mediaopt full-duplex #create the lagg interface ifconfig lagg0 create #set lagg0's protocol to lacp, add both cards to the interface, #and assign it em1's ip/netmask ifconfig lagg0 laggproto lacp laggport em0 laggport em1 ***.***.***.*** netmask 255.255.255.0 The switches are configured as follows: #clear out old junk no int Po1 default int range GigabitEthernet 0/15 - 16 # config ports interface range GigabitEthernet 0/15 - 16 description lagg-test switchport duplex full speed 1000 switchport access vlan 192 spanning-tree portfast channel-group 1 mode active channel-protocol lacp **** switchport trunk encapsulation dot1q **** no shutdown exit interface Port-channel 1 description lagginterface switchport access vlan 192 exit port-channel load-balance src-mac end obviously change 1000's to 100's and GigabitEthernet to FastEthernet for the 3550's config, as that switch has 100Mbit speed ports. With this config on the 3550, I get failover and 92Mbits/sec speed on both links, simultaneously, connecting to 2 hosts.(tested with iperf) Success. However this is only with the "switchport trunk encapsulation dot1q" line. First, I do not understand why I need this, I thought it was only for connecting switches. Is there some other setting which this turns on that is actually responsible for the speed increase? Second, This config does not work on the 3560. I get failover, but not the speed increase. Speeds drop from gig/sec to 500Mbit/sec when I make 2 simultaneous connections to the server with or without the encapsulation line. I should mention that both switches are using source-mac load balancing. In my test I am using Iperf. I have the server(lagg box) setup as the server(iperf -s), and the client computers are client(iperf -c server-ip-address), so the source mac(and IP) are different for both connections. Any ideas/corrections/questions would be helpful, as the gig switches are what I actually need the lagg links on. Ask if you need more information.

  Read the article

• Switches with 802.1x "supplicant timeout" feature?

  - by chris

  I'm looking for a complete list of switches which will allow 802.1x and normal (non-supplicant) enabled hosts to connect to the same ports on a switch. This is useful for areas where there are semi-open ports such as a lobby area or a library where corporate and guest users may use the same ports but you want them to have different access profiles and where it isn't expected that guests would have 802.1x configured on their system. For instance, Enterasys and Extreme Networks both have a feature where if the switch doesn't see an EAPOL packet from the client in a certain amount of time, it puts the port into a "guest" VLAN; if it sees an 802.1x supplicant, it tries to authenticate the user via 802.1x and if they succeed, it does what the radius server tells it to do with that port (IE put the port into a certain VLAN, apply certain ACLs, etc) Do other vendors have this sort of feature, or is it expected that a switch will do both 802.1x and MAC authentication, and the "supplicant timeout" feature is implemented with a blanket allow on the MAC authentication?

  Read the article

• How do I undelete stickies (the OS X widget version)?

  - by Andrew Grimm

  In Mac OS X Snow Leopard, is it possible to undelete accidentally deleted stickies? (The widget version, not the application version)

  Read the article

• Virtual Machine Performance - More RAM or More Processor?

  - by webworm

  When looking to improve Virtual Machine performance what would be better ... Increasing the available RAM or increasing the processor power? Here is my choice ... Core 2 Duo @ 2.4 GHz with 8 GB RAM and integrated graphics (Mac Book Pro 13") Core i7 @ 2.6 GHz with 4 GB RAM and 512 MB dedicated graphics (Mac Book Pro 15") I plan to run Windows x64 in the VM with SQL Server 2008, Visual Studio 2010, and SharePoint 2010. I am planning to run VMWare Fusion v3. I also didn't know if a dedicated graphics card makes a difference when using a Virtual Machine. Thank you.

  Read the article

• Why might one host be unable to access the Internet, when it can ping the router and when all other hosts can?

  - by user1444233

  I have a Draytek Vigor 2830n. It's kicking out a 192.168.3.0 LAN. It performs load-balancing across dual-WAN ports, although I've turned off the second WAN to simplify testing. There are many hosts on the LAN. All IPs are allocated through DHCP, most freely allocated from the pool, but one or two are bound to NIC MAC addresses. All hosts can access the Internet, save one. That host (192.168.3.100 or 'dot100' for short) gets allocated an IP address (and the right gateway address, DNS server addresses, subnet etc.) dot100 can ping itself. It can ping the gateway, and access the latter's web interface via port 80. It's responsive and loss-free (sustained ping over a couple of minutes reports no data loss). Yet, for some reason that evades me, dot100 can't ping an external IP address or domain name. I suspect it's never been able to, because it was getting some Internet access from a second adaptor (different subnet), but that's now been turned off, which exposed the problem. In dot100, I've tried: two operating systems (Windows 8 and Knoppix), to rule out anti-virus programs etc. two physical adaptors two cables, on each adaptor two IPs (e.g. .100 and .103 assigned by Mac and .26 from the pool) both dynamic and assigned (MAC-bound) DHCP-allocated IPs but none of this experiments yielded any variation in the result. dot100 is a crucial host. It's a file server for the network, so I need it to be reliably allocated a consistent IP. Can anyone offer a potential solution or a way forward with the analysis please? My guess My analysis so far leads me to believe it's a router issue. I've checked the web interface very carefully. There are no filters setup in Firewall - General Setup or Filter Setup. I suspect it's a corrupted internal routing table, but the web UI shows this as the Routing table: Key: C - connected, S - static, R - RIP, * - default, ~ - private * 0.0.0.0/ 0.0.0.0 via 62.XX.XX.X WAN1 * 62.XX.XX.X/ 255.255.255.255 via 62.XX.XX.X WAN1 S 82.YY.YYY.YYY/ 255.255.255.255 via 82.YY.YYY.YYY WAN1 C 192.168.1.0/ 255.255.255.0 directly connected WAN2 C~ 192.168.3.0/ 255.255.255.0 directly connected LAN2

  Read the article

• My wifi internet router connection resets when more devices connected

  - by joeeoj

  The wifi internet router is connected directly to Internet cable. The main Pc is attached to it via LAN cable, while 1 laptop and 3 mobile phones connect to it via wifi. Whenever 2 or more devices connect via wifi, the internet connection breaks after one minute and internet connection resets. I tracked this behaviour for weeks, and came to conclusion: It seems like some 'device 1' got IP then it went to suspend mode. Then 'device 2' connected to router and got the same IP. Then the 'device 1' woke up from suspend mode and tried to use his old IP. The router sees that 2 same IP addresses exists and automatically reset internet connection. Is this possible? Have I tracked the problem correctly and how to solve it? The router is set to lease 100 IP addresses to devices who try to connect. The password is strong and no hacker's device is being connected to my wifi network. Tried changing password and AP's name.

  Read the article

• ScreenShare: command line and observe only.

  - by Shyam

  Hi, I have a wide TV screen that is attached to a Mac Mini. I am able to use this screen as a second screen using an application like ScreenRecycler. However, Sometimes I want to demonstrate what I am doing on my box on this TV screen. As this TV is attached to a Mac Mini, I want to have a screen sharing done reversed. As I know screen share can be done in observe mode and full screen, this would be more than sufficient. Because it would be pretty useless to run it continuously, I want it on demand. For this, I want to use SSH. So the only thing I would like to know is, how do I start screen sharing in from a Terminal Session. On Windows, I could start an application by using "start notepad.exe", I am looking for something similar. Eventually, I want to make this work on other boxes too. Thanks for your help!

  Read the article

• force https with apache before .htpasswd

  - by johnlai2004

  I have this in my .htaccess file RewriteEngine On RewriteCond %{HTTPS} off RewriteRule ^(.*)$ https://www.myweb.com/phpmyadmin$1 [R,L] AuthUserFile /var/www/myweb/.htpasswd AuthGroupFile /dev/null AuthName "Sovereign Databases" AuthType Basic <Limit GET> require valid-user </Limit> But everytime I go to http://www.myweb.com/phpmyadmin, the .htpasswd prompts me for a credentials BEFORE i'm redirected to https://www.myweb.com/phpmyadmin. After I type in my username and password, I get redirected to https://www.myweb.com/phpmyadmin. The problem is that I don't want anyone to submit their username and password unencrypted via http. How do I force people to login via the https version even if they typed in the http version?

  Read the article

< Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >