Search Results

Search found 9765 results on 391 pages for 'skill building'.

Page 364/391 | < Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >

• What are the pros and cons of using manual list iteration vs recursion through fail

  - by magus

  I come up against this all the time, and I'm never sure which way to attack it. Below are two methods for processing some season facts. What I'm trying to work out is whether to use method 1 or 2, and what are the pros and cons of each, especially large amounts of facts. methodone seems wasteful since the facts are available, why bother building a list of them (especially a large list). This must have memory implications too if the list is large enough ? And it doesn't take advantage of Prolog's natural backtracking feature. methodtwo takes advantage of backtracking to do the recursion for me, and I would guess would be much more memory efficient, but is it good programming practice generally to do this? It's arguably uglier to follow, and might there be any other side effects? One problem I can see is that each time fail is called, we lose the ability to pass anything back to the calling predicate, eg. if it was methodtwo(SeasonResults), since we continually fail the predicate on purpose. So methodtwo would need to assert facts to store state. Presumably(?) method 2 would be faster as it has no (large) list processing to do? I could imagine that if I had a list, then methodone would be the way to go.. or is that always true? Might it make sense in any conditions to assert the list to facts using methodone then process them using method two? Complete madness? But then again, I read that asserting facts is a very 'expensive' business, so list handling might be the way to go, even for large lists? Any thoughts? Or is it sometimes better to use one and not the other, depending on (what) situation? eg. for memory optimisation, use method 2, including asserting facts and, for speed use method 1? season(spring). season(summer). season(autumn). season(winter). % Season handling showseason(Season) :- atom_length(Season, LenSeason), write('Season Length is '), write(LenSeason), nl. % ------------------------------------------------------------- % Method 1 - Findall facts/iterate through the list and process each %-------------------------------------------------------------- % Iterate manually through a season list lenseason([]). lenseason([Season|MoreSeasons]) :- showseason(Season), lenseason(MoreSeasons). % Findall to build a list then iterate until all done methodone :- findall(Season, season(Season), AllSeasons), lenseason(AllSeasons), write('Done'). % ------------------------------------------------------------- % Method 2 - Use fail to force recursion %-------------------------------------------------------------- methodtwo :- % Get one season and show it season(Season), showseason(Season), % Force prolog to backtrack to find another season fail. % No more seasons, we have finished methodtwo :- write('Done').

  Read the article

• how to increment a javascript variable title that is within a php while loop

  - by steve

  I'm building multiple countdown clocks on one page. The number of countdown clocks varies from day to day so I need to call javascript several times from within "while" code in php to produce different clocks. The following code works but it's based on knowing how many clocks are needed before I start: <script language="javascript" src="countdown.js"></script> <script language="javascript"> var cd1 = new countdown('cd1'); cd1.Div = "clock1"; cd1.TargetDate = "<?php echo "$clocktime"; ?>"; cd1.DisplayFormat = "%%D%% days, %%H%% hours, %%M%% minutes, %%S%% seconds until event AAA happens"; </script> <div id="clockwrapper"><div id="clock1">[clock]</div></div> <script language="javascript" src="countdown.js"></script> <script language="javascript"> var cd2 = new countdown('cd2'); cd2.Div = "clock2"; cd2.TargetDate = "02/01/2011 5:30:30 PM"; cd2.DisplayFormat = "%%D%% days, %%H%% hours, %%M%% minutes, %%S%% seconds until event BBB happens..."; </script> <div id="clockwrapper"><div id="clock2">[clock]</div></div> So if I keep on calling the javascript above (the code with cd1 in it) all previous "cd1" clocks change to the latest clock because it is being overwritten. Somehow I need to call javascript from within my "while" loop in php and have cd1 become cd2, then cd3 so that the clocks work as they're supposed to. How do I go about doing this? I don't know how to call the javascript several times and increment the variable cd1 within the javascript. I tried something like this but couldn't get it to work. $id=mysql_result($result,$i,"id"); while($id){ $cd = ("$cd"."$id"); ?> <script language="javascript" src="countdown.js"></script> <script language="javascript"> var <?php echo "$cd"; ?> = new countdown('<?php echo "$cd"; ?>'); .... </script> <div id="clockwrapper"><div id="<?php echo "$cd"; ?>">[clock]</div></div> <?php $id=mysql_result($result,$i,"id"); } ?> Surely there is some easy way of getting around this that I don't know about. Thanks

  Read the article

• Wierdness debugging Visual Studio C++ 2008

  - by Jeff Dege

  I have a legacy C++ app, that in its most incarnation we've been building with makefiles and VS2003's command-line tool. I'm trying to get it to build using VS2008 and MsBuild. The build is working OK, but I'm getting errors where I'd never seen errors, before, and stepping through in VS2008's debugger only confuses me. The app links a number of static libraries, which fall into two categories: those that are part of the same application suite, and those that are shared between a number of application suites. Originally, I had a .csproj file for each static library, and two .sln files, one for the application suite (including the suite-specific libraries) and one for the non-suite-specific shared libraries. The shared libraries were included in the link, their projects were not included in the application suite .sln. The application instantiates an object from a class that is defined in one of the shared libraries. The class has a member object of a class that wraps a linked list. The constructor of the linked list class sets its "head" pointer to null. When I run the app, and try to add an element to the linked list, I get an error - the head pointer contains the value 0xCCCCCCCC. So I step through with the debugger. And see weirdness. When the current line in the debugger is in a source file belonging to the static library, the head pointer contains 0x00000000. When I step into the constructor, I can see the pointer being set to that value, and when I'm stepped into any other method of the class, I can see that the head pointer still contains 0x00000000. But when I step out into methods that are defined in the application suite .sln, it contains 0xCCCCCCCC. It's not like it's being overwritten. It changes back and forth depending upon which source file I am currently debugging. So I included the shared library's project in the application suite .sln, and now I see the head pointer containing 0xCCCCCCCC all the time. It looks like the constructor of the linked list class is not being called. So now, I'm entirely confused. Anyone have any ideas?

  Read the article

• [NHibernate and ASP.NET MVC] How can I implement a robust session-per-request pattern in my project,

  - by Guillaume Gervais

  I'm currently building an ASP.NET MVC project, with NHibernate as its persistance layer. For now, some functionnalities have been implemented, but only use local NHibernate sessions: each method that accessed the database (read or write) needs to instanciate its own NHibernate session, with the "using()" directive. The problem is that I want to leverage NHibernate's Lazy-Loading capabilities to improve the performance of my project. This implies an open NHibernate session per request until the view is rendered. Furthermore, simultaneous request must be supported (multiple Sessions at the same time). How can I achieve that as cleanly as possible? I searched the Web a little bit and learned about the session-per-request pattern. Most of the implementations I saw used some sort of Http* (HttpContext, etc.) object to store the session. Also, using the Application_BeginRequest/Application_EndRequest functions is complicated, since they get fired for each HTTP request (aspx files, css files, js files, etc.), when I only want to instanciate a session once per request. The concern that I have is that I don't want my views or controllers to have access to NHibernate sessions (or, more generally, NHibernate namespaces and code). That means that I do not want to handle sessions at the controller level nor the view one. I have a few options in mind. Which one seems the best ? Use interceptors (like in GRAILS) that get triggered before and after the controller action. These would open and close sessions/transactions. Is it possible in the ASP.NET MVC world? Use the CurrentSessionContext Singleton provided by NHibernate in a Web context. Using this page as an example, I think this is quite promising, but that still requires filters at the controller level. Use the HttpContext.Current.Items to store the request session. This, coupled with a few lines of code in Global.asax.cs, can easily provide me with a session on the request level. However, it means that dependencies will be injected between NHibernate and my views (HttpContext). Thank you very much!

  Read the article

• WCF App using Peer Chat app as example does not work.

  - by splate

  I converted a VB .Net 3.5 app to use peer to peer WCF using the available Microsoft example of the Chat app. I made sure that I copied the app.config file for the sample(modified the names for my app), added the appropriate references. I followed all the tutorials and added the appropriate tags and structure in my app code. Everything runs without any errors, but the clients only get messages from themselves and not from the other clients. The sample chat application does run just fine with multiple clients. The only difference I could find is that the server on the sample is targeting the framework 2.0, but I assume that is wrong and it is building it in at least 3.0 or the System.ServiceModel reference would break. Is there something that has to be registered that the sample is doing behind the scenes or is the sample a special project type? I am confused. My next step is to copy all my classes and logic from my app to the sample app, but that is likely a lot of work. Here is my Client App.config: <client><endpoint name="thldmEndPoint" address="net.p2p://thldmMesh/thldmServer" binding="netPeerTcpBinding" bindingConfiguration="PeerTcpConfig" contract="THLDM_Client.IGameService"></endpoint></client> <bindings><netPeerTcpBinding> <binding name="PeerTcpConfig" port="0"> <security mode="None"></security> <resolver mode="Custom"> <custom address="net.tcp://localhost/thldmServer" binding="netTcpBinding" bindingConfiguration="TcpConfig"></custom> </resolver> </binding></netPeerTcpBinding> <netTcpBinding> <binding name="TcpConfig"> <security mode="None"></security> </binding> </netTcpBinding> </bindings> Here is my server App.config: <services> <service name="System.ServiceModel.PeerResolvers.CustomPeerResolverService"> <host> <baseAddresses> <add baseAddress="net.tcp://localhost/thldmServer"/> </baseAddresses> </host> <endpoint address="net.tcp://localhost/thldmServer" binding="netTcpBinding" bindingConfiguration="TcpConfig" contract="System.ServiceModel.PeerResolvers.IPeerResolverContract"> </endpoint> </service> </services> <bindings> <netTcpBinding> <binding name="TcpConfig"> <security mode="None"></security> </binding> </netTcpBinding> </bindings> Thanks ahead of time.

  Read the article

• How to Transfer Large File from MS Word Add-In (VBA) to Web Server?

  - by Ian Robinson

  Overview I have a Microsoft Word Add-In, written in VBA (Visual Basic for Applications), that compresses a document and all of it's related contents (embedded media) into a zip archive. After creating the zip archive it then turns the file into a byte array and posts it to an ASMX web service. This mostly works. Issues The main issue I have is transferring large files to the web site. I can successfully upload a file that is around 40MB, but not one that is 140MB (timeout/general failure). A secondary issue is that building the byte array in the VBScript Word Add-In can fail by running out of memory on the client machine if the zip archive is too large. Potential Solutions I am considering the following options and am looking for feedback on either option or any other suggestions. Option One Opening a file stream on the client (MS Word VBA) and reading one "chunk" at a time and transmitting to ASMX web service which assembles the "chunks" into a file on the server. This has the benefit of not adding any additional dependencies or components to the application, I would only be modifying existing functionality. (Fewer dependencies is better as this solution should work in a variety of server environments and be relatively easy to set up.) Question: Are there examples of doing this or any recommended techniques (either on the client in VBA or in the web service in C#/VB.NET)? Option Two I understand WCF may provide a solution to the issue of transferring large files by "chunking" or streaming data. However, I am not very familiar with WCF, and am not sure what exactly it is capable of or if I can communicate with a WCF service from VBA. This has the downside of adding another dependency (.NET 3.0). But if using WCF is definitely a better solution I may not mind taking that dependency. Questions: Does WCF reliably support large file transfers of this nature? If so, what does this involve? Any resources or examples? Are you able to call a WCF service from VBA? Any examples?

  Read the article

• Issues querying Access '07 database in C#

  - by Kye

  I'm doing a .NET unit as part of my studies. I've only just started, with a lecturer that as kinda failed to give me the most solid foundation with .NET, so excuse the noobishness. I'm making a pretty simple and generic database-driven application. I'm using C# and I'm accessing a Microsoft Access 2007 database. I've put the database-ish stuff in its own class with the methods just spitting out OleDbDataAdapters that I use for committing. I feed any methods which preform a query a DataSet object from the main program, which is where I'm keeping the data (multiple tables in the db). I've made a very generic private method that I use to perform SQL SELECT queries and have some public methods wrapping that method to get products, orders.etc (it's a generic retail database). The generic method uses a separate Connect method to actually make the connection, and it is as follows: private static OleDbConnection Connect() { OleDbConnection conn = new OleDbConnection( @"Provider=Microsoft.ACE.OLEDB.12.0; Data Source=C:\Temp\db.accdb"); return conn; } The generic method is as follows: private static OleDbDataAdapter GenericSelectQuery( DataSet ds, string namedTable, String selectString) { OleDbCommand oleCommand = new OleDbCommand(); OleDbConnection conn = Connect(); oleCommand.CommandText = selectString; oleCommand.Connection = conn; oleCommand.CommandType = CommandType.Text; OleDbDataAdapter adapter = new OleDbDataAdapter(); adapter.SelectCommand = oleCommand; adapter.MissingSchemaAction = MissingSchemaAction.AddWithKey; adapter.Fill(ds, namedTable); return adapter; } The wrapper methods just pass along the DataSet that they received from the main program, the namedtable string is the name of the table in the dataset, and you pass in the query you wish to make. It doesn't matter which query I give it (even something simple like SELECT * FROM TableName) I still get thrown an OleDbException, stating that there was en error with the FROM clause of the query. I've just resorted to building the queries with Access, but there's still no use. Obviously there's something wrong with my code, which wouldn't actually surprise me. Here are some wrapper methods I'm using. public static OleDbDataAdapter GetOrderLines(DataSet ds) { OleDbDataAdapter adapter = GenericSelectQuery( ds, "orderlines", "SELECT OrderLine.* FROM OrderLine;"); return adapter; } They all look the same, it's just the SQL that changes.

  Read the article

• How should I handle the case in which a username is already in use?

  - by idealmachine

  I'm a JavaScript programmer and new to PHP and MySQL (want to get into server-side coding). Because I'm trying to learn PHP by building a simple online game (more specifically, correspondence chess), I'm starting by implementing a simple user accounts system. Of course, user registration comes first. What are the best practices for: How I should handle the (likely) possibility that when a user tries to register, the username he has chosen is already in use, particularly when it comes to function return values?($result === true is rather ugly, and I'm not sure whether checking the MySQL error code is the best way to do it either) How to cleanly handle varying page titles?($gPageTitle = '...'; require_once 'bgsheader.php'; is also rather ugly) Anything else I'm doing wrong? In some ways, PHP is rather different from JavaScript... Here is a (rather large) excerpt of the code I have written so far. Note that this is a work in progress and is missing security checks that I will add as my next step. function addUser( $username, $password ) { global $gDB, $gPasswordSalt; $stmt = $gDB->prepare( 'INSERT INTO user(user_name, user_password, user_registration) VALUES(?, ?, NOW())' ); $stmt || trigger_error( 'Failed to prepare statement: ' . htmlspecialchars( $gDB->error ) ); $hashedPassword = hash_hmac( 'sha256', $password, $gPasswordSalt, true ); $stmt->bind_param( 'ss', $username, $hashedPassword ); if( $stmt->execute() ) { return true; } elseif( $stmt->errno == 1062) { return 'exists'; } else { trigger_error( 'Failed to execute statement: ' . htmlspecialchars( $stmt->error ) ); } } $username = $_REQUEST['username']; $password = $_REQUEST['password']; $result = addUser( $username, $password ); if( $result === true ) { $gPageTitle = 'Registration successful'; require_once 'bgsheader.php'; echo '<p>You have successfully registered as ' . htmlspecialchars( $username ) . ' on this site.</p>'; } elseif( $result == 'exists' ) { $gPageTitle = 'Username already taken'; require_once 'bgsheader.php'; echo '<p>Someone is already using the username you have chosen. Please try using another one instead.'; } else { trigger_error('This should never happen'); } require_once 'bgsfooter.php';

  Read the article

• Insert Registration Data in MySQL using PHP

  - by J M 4

  I may not be asking this in the best way possible but i will try my hardest. Thank you ahead of time for your help: I am creating an enrollment website which allows an individual OR manager to enroll for medical testing services for professional athletes. I will NOT be using the site as a query DB which anybody can view information stored within the database. The information is instead simply stored, and passed along in a CSV format to our network provider so they can use as needed after the fact. There are two possible scenarios: Scenario 1 - Individual Enrollment If an individual athlete chooses to enroll him/herself, they enter their personal information, submit their payment information (credit/bank account) for processing, and their information is stored in an online database as Athlete1. Scenario 2 - Manager Enrollment If a manager chooses to enroll several athletes he manages/ promotes for, he enters his personal information, then enters the personal information for each athlete he wishes to pay for (name, address, ssn, dob, etc), then submits payment information for ALL athletes he is enrolling. This number can range from 1 single athlete, up to 20 athletes per single enrollment (he can return and complete a follow up enrollment for additional athletes). Initially, I was building the database to house ALL information regardless of enrollment type in a single table which housed over 400 columns (think 20 athletes with over 10 fields per athlete such as name, dob, ssn, etc). Now that I think about it more, I believe create multiple tables (manager(s), athlete(s)) may be a better idea here but still not quite sure how to go about it for the following very important reasons: Issue 1 If I list the manager as the parent table, I am afraid the individual enrolling athlete will not show up in the primary table and will not be included in the overall registration file which needs to be sent on to the network providers. Issue 2 All athletes being enrolled by a manager are being stored in SESSION as F1FirstName, F2FirstName where F1 and F2 relate to the id of the fighter. I am not sure technically speaking how to store multiple pieces of information within the same table under separate rows using PHP. For example, all athleteswill have a first name. The very basic theory of what i am trying to do is: If number_of_athletes 1, store F1FirstName in row 1, column 1 of Table "Athletes"; store F1LastName in row 1, column 2 of Table "Athletes"; store F2FirstName in row 2, column 1 of Table "Athletes"; store F2LastName in row 2, column 2 of table "Athletes"; Does this make sense? I know this question is very long and probably difficult so i appreciate the guidance.

  Read the article

• AJAX: Problems returning multiple variables

  - by fwaokda

  First off sorry if I'm missing something simple just started working with AJAX today. I have an issue where I'm trying to get information from my database, but different records have different amounts of values. For instance, each record has a "features" column. In the features column I store a string. (ex: Feature1~Feature2~Feature3~Feature4... ) When I'm building the object I take apart the string and store all the features into an array. Some objects can have 1 feature others can have up to whatever. So... how do I return this values back to my ajax function from my php page? Below is my ajax function that I was trying and I'll provide a link with my php file. [ next.php : http://pastebin.com/SY74jV7X ] $("a#next").click(function() { $.ajax({ type : 'POST', url : 'next.php', dataType : 'json', data : { nextID : $("a#next").attr("rel") }, success : function ( data ) { var lastID = $("a#next").attr("rel"); var originID = $("a#next").attr("rev"); if(lastID == 1) { lastID = originID; } else { lastID--; } $("img#spotlight").attr("src",data.spotlightimage); $("div#showcase h1").text(data.title); $("div#showcase h2").text(data.subtitle); $("div#showcase p").text(data.description); $("a#next").attr("rel", lastID); for(var i=0; i < data.size; i++) { $("ul#features").append("<li>").text(data.feature+i).append("</li>"); } /* for(var j=1; j < data.picsize; j++) { $("div.thumbnails ul").append("<li>").text(data.image+j).append("</li>"); } */ }, error : function ( XMLHttpRequest, textStatus, errorThrown) { $("div#showcase h1").text("An error has occured: " + errorThrown); } }); });

  Read the article

• Realtime MySQL search results on an advanced search page

  - by Andrew Heath

  I'm a hobbyist, and started learning PHP last September solely to build a hobby website that I had always wished and dreamed another more competent person might make. I enjoy programming, but I have little free time and enjoy a wide range of other interests and activities. I feel learning PHP alone can probably allow me to create 98% of the desired features for my site, but that last 2% is awfully appealing: The most powerful tool of the site is an advanced search page that picks through a 1000+ record game scenario database. Users can data-mine to tremendous depths - this advanced page has upwards of 50 different potential variables. It's designed to allow the hardcore user to search on almost any possible combination of data in our database and it works well. Those who aren't interested in wading through the sea of options may use the Basic Search, which is comprised of the most popular parts of the Advanced search. Because the advanced search is so comprehensive, and because the database is rather small (less than 1,200 potential hits maximum), with each variable you choose to include the likelihood of getting any qualifying results at all drops dramatically. In my fantasy land where I can wield AJAX as if it were Excalibur, my users would have a realtime Total Results counter in the corner of their screen as they used this page, which would automatically update its query structure and report how many results will be displayed with the addition of each variable. In this way it would be effortless to know just how many variables are enough, and when you've gone and added one that zeroes out the results set. A somewhat similar implementation, at least visually, would be the Subtotal sidebar when building a new custom computer on IBuyPower.com For those of you actually still reading this, my question is really rather simple: Given the time & ability constraints outlined above, would I be able to learn just enough AJAX (or whatever) needed to pull this one feature off without too much trouble? would I be able to more or less drop-in a pre-written code snippet and tweak to fit? or should I consider opening my code up to a trusted & capable individual in the future for this implementation? (assuming I can find one...) Thank you.

  Read the article

• Using hidden values with jQuery (and ASP.NET MVC) -- not working?

  - by SlackerCoder

  Im using a couple of JSON calls to render data, etc etc. In order to keep the proper key value, I am storing it in a tag. I have this in several places in my code, none of which cause an issue like this one is. Here is the jQuery: The call that "sets" the value: $("a[id^='planSetupAddNewPlan']").live('click', function() { var x = $(this).attr('id'); x = x.substring(19); $("#hidPlanSetupCurrentGroupKey").val(x); $.getJSON("/GroupSetup/PlanSetupAddNewList", { GroupKey: x }, function(data) { $("#planSetupAddNew").html('' + data.TableResult + ''); alert('First Inside 2 ' + x); $.blockUI({ message: $("#planSetupAddNew") }); }); }); The call that "gets" the value: $("#ddlPlanSetupAddNewProduct").live('change', function() { var a = $("#hidPlanSetupCurrentGroupKey").val(); var prod = $(this).val(); alert(a); $.getJSON("/GroupSetup/PlanSetupChangePlanList", { GroupKey: a, Product: prod }, function(data) { if (data.Message == "Success") { $("#planSetupAddNewPlan").html('' + data.TableResult + ''); } else if (data.Message == "Error") { //Do something } }); }); Here is the html in question: <div id="planSetupAddNew" style="display:none; cursor: default;"> <input type="hidden" id="hidPlanSetupCurrentGroupKey" /> <div id="planSetupAddNewData"> </div> </div> In the first section, the alert ('First Inside 2 ' + x) returns what I expect (where x = the key value), and if I add a line to display the contents of the hidden field, that works as well: ie. var key = $("#hidPlanSetupCurrentGroupKey").val(); alert(key); In the "alert(a);" call, I am getting "undefined". I have looked at the other code in the same view and it is the same and it works. I must be missing something, or have some sort of mistype that I havent caught. Just an overview of the controller events: The first call (/GroupSetup/PlanSetupAddNewList) will return an html string building a "form" for users to enter information into. The second call (/GroupSetup/PlanSetupChangePlanList) just changes a second dropdown based on the first dropdown selection (overwriting the html in the div). If you need more info, let me know! Any thoughts/tips/pointers/suggestions?!?! Thanks for all your help :)

  Read the article

• How do make dependency generation work for C? (Also..decode this sed/make statement!)

  - by Derek

  Hi all. I have a make build system that I am trying to decipher that someone else wrote. I am getting an error when I run it on a redhat system, but not when I run it on my solaris system. The versions of gmake are the same major revision (one off on minor revision). This is for building a C project, and the make system has a global Makefile.global that is inherited by each directory's local Makefile The Makefile.global has all the targets in it, starting with all: $(LIB) $(BIN) where LIB builds libs and BIN builds binaries. jumping down the targets I have $(LIB) : $(GEN_LIB) $(GEN_LIB) : $(GEN_DEPS) $(GEN_OBJS) $(AR) $(ARFLAGS) $(GEN_LIB) $(GEN_OBJS) $(GEN_DEPS) : @set -e; rm -f $@; \ $(CC) $(CDEP_FLAG) $(CFLAGS) $(INCDIRS) `basename $@ | sed 's/\.d/\.c/' | sed 's,^,$(HOME_SRC)/,'` | sed 's,\(.*\)\.o: ,$(GEN_OBJDIR)/\1.o $@ :,g' > [email protected] ; \ cat [email protected] > $@ ; \ cat [email protected] | cut -d: -f2 | grep '\.h' | sed 's,\.h,.h :,g' >> $@ ; \ rm [email protected] $(GEN_OBJS) : $(CC) $(CFLAGS) $(INCDIRS) -c $(*F).c -lmpi -o $@ I think these are all the relevant targets I need to include to answer my question. Definitions of those variables: CC = icc CDEP_FLAG = -M CFLAGS = various compiler flags ifdef type flags INCDIRS = include directory where all .h files are GEN_OBJDIR = /lib/objs HOME_SRC = . GEN_LIB = lib/$(LIB) GEN_DEPDIR=/lib/deps GEN_DEPS = $(addprefix $(GEN_DEPDIR)/,$(addsuffix .d,$(basename $(OBJS)))) I think this has everything covered you need. Basically self explanatory from the names. Now as best I can tell, this is generating in /lib/deps a .d file that has the object and source dependencies in it. In other words, for the utilities.a library, I will get a utils.o and utils.c dependency stack, all in the file utils.d There is some syntax error that is being generated in that file I think, because I get the following error: ../lib/deps/util.d:25: *** target pattern contains no '%'. Stop. gmake[2]: *** [all] Error 2 gmake[1]: *** [all] Error 2 gmake: *** [all] Error 2 I am not sure if my error is in the dependency generation, or some further down part, like the object generation target? If you need further info, let me know, I will add to post

  Read the article

• JUnit for Functions with Void Return Values

  - by RobotNerd

  I've been working on a Java application where I have to use JUnit for testing. I am learning it as I go. So far I find it to be useful, especially when used in conjunction with the Eclipse JUnit plugin. After playing around a bit, I developed a consistent method for building my unit tests for functions with no return values. I wanted to share it here and ask others to comment. Do you have any suggested improvements or alternative ways to accomplish the same goal? Common Return Values First, there's an enumeration which is used to store values representing test outcomes. public enum UnitTestReturnValues { noException, unexpectedException // etc... } Generalized Test Let's say a unit test is being written for: public class SomeClass { public void targetFunction (int x, int y) { // ... } } The JUnit test class would be created: import junit.framework.TestCase; public class TestSomeClass extends TestCase { // ... } Within this class, I create a function which is used for every call to the target function being tested. It catches all exceptions and returns a message based on the outcome. For example: public class TestSomeClass extends TestCase { private UnitTestReturnValues callTargetFunction (int x, int y) { UnitTestReturnValues outcome = UnitTestReturnValues.noException; SomeClass testObj = new SomeClass (); try { testObj.targetFunction (x, y); } catch (Exception e) { UnitTestReturnValues.unexpectedException; } return outcome; } } JUnit Tests Functions called by JUnit begin with a lowercase "test" in the function name, and they fail at the first failed assertion. To run multiple tests on the targetFunction above, it would be written as: public class TestSomeClass extends TestCase { public void testTargetFunctionNegatives () { assertEquals ( callTargetFunction (-1, -1), UnitTestReturnValues.noException); } public void testTargetFunctionZeros () { assertEquals ( callTargetFunction (0, 0), UnitTestReturnValues.noException); } // and so on... } Please let me know if you have any suggestions or improvements. Keep in mind that I am in the process of learning how to use JUnit, so I'm sure there are existing tools available that might make this process easier. Thanks!

  Read the article

• nodejs async.waterfall method

  - by user1513388

  Update 2 Complete code listing var request = require('request'); var cache = require('memory-cache'); var async = require('async'); var server = '172.16.221.190' var user = 'admin' var password ='Passw0rd' var dn ='\\VE\\Policy\\Objects' var jsonpayload = {"Username": user, "Password": password} async.waterfall([ //Get the API Key function(callback){ request.post({uri: 'http://' + server +'/sdk/authorize/', json: jsonpayload, headers: {'content_type': 'application/json'} }, function (e, r, body) { callback(null, body.APIKey); }) }, //List the credential objects function(apikey, callback){ var jsonpayload2 = {"ObjectDN": dn, "Recursive": true} request.post({uri: 'http://' + server +'/sdk/Config/enumerate?apikey=' + apikey, json: jsonpayload2, headers: {'content_type': 'application/json'} }, function (e, r, body) { var dns = []; for (var i = 0; i < body.Objects.length; i++) { dns.push({'name': body.Objects[i].Name, 'dn': body.Objects[i].DN}) } callback(null, dns, apikey); }) }, function(dns, apikey, callback){ // console.log(dns) var cb = []; for (var i = 0; i < dns.length; i++) { //Retrieve the credential var jsonpayload3 = {"CredentialPath": dns[i].dn, "Pattern": null, "Recursive": false} console.log(dns[i].dn) request.post({uri: 'http://' + server +'/sdk/credentials/retrieve?apikey=' + apikey, json: jsonpayload3, headers: {'content_type': 'application/json'} }, function (e, r, body) { // console.log(body) cb.push({'cl': body.Classname}) callback(null, cb, apikey); console.log(cb) }); } } ], function (err, result) { // console.log(result) // result now equals 'done' }); Update: I'm building a small application that needs to make multiple HTTP calls to a an external API and amalgamates the results into a single object or array. e.g. Connect to endpoint and get auth key - pass auth key to step 2 Connect to endpoint using auth key and get JSON results - create an object containing summary results and pass to step 3. Iterate over passed object summary results and call API for each item in the object to get detailed information for each summary line Create a single JSON data structure that contains the summary and detail information. The original question below outlines what I've tried so far! Original Question: Will the async.waterfall method support multiple callbacks? i.e. Iterate over an array thats passed from a previous item in the chain, then invoke multiple http requests each of which would have their own callbacks. e.g, sync.waterfall([ function(dns, key, callback){ var cb = []; for (var i = 0; i < dns.length; i++) { //Retrieve the credential var jsonpayload3 = {"Cred": dns[i].DN, "Pattern": null, "Recursive": false} console.log(dns[i].DN) request.post({uri: 'http://' + vedserver +'/api/cred/retrieve?apikey=' + key, json: jsonpayload3, headers: {'content_type': 'application/json'} }, function (e, r, body) { console.log(body) cb.push({'cl': body.Classname}) callback(null, cb, key); }); } }

  Read the article

• Webservice for uploading data: security considerations

  - by Philip Daubmeier

  Hi everyone! Im not sure about what authentification method I should use for my webservice. I've searched on SO, and found nothing that helped me. Preliminary Im building an application that uploads data from a local database to a server (running my webservice), where all records are merged and stored in a central database. I am currently binary serializing a DataTable, that holds a small fragment of the local database, where all uninteresting stuff is already filtered out. The byte[] (serialized DataTable), together with the userid and a hash of the users password is then uploaded to the webservice via SOAP. The application together with the webservice already work exactly like intended. The Problem The issue I am thinking about is now: What is if someone just sniffs the network traffic, 'steals' the users id and password hash to send his own SOAP message with modified data that corrupts my database? Options The approaches to solving that problem, I already thought of, are: Using ssl + certificates for establishing the connection: I dont really want to use ssl, I would prefer a simpler solution. After all, every information that is transfered to the webservice can be seen on the website later on. What I want to say is: there is no secret/financial/business-critical information, that has to be hidden. I think ssl would be sort of an overkill for that task. Encrypting the byte[]: I think that would be a performance killer, considering that the goal of the excercise was simply to authenticate the user. Hashing the users password together with the data: I kind of like the idea: Creating a checksum from the data, concatenating that checksum with the password-hash and hashing this whole thing again. That would assure the data was sent from this specific user, and the data wasnt modified. The actual question So, what do you think is the best approach in terms of meeting the following requirements? Rather simple solution (As it doesnt have to be super secure; no secret/business-critical information transfered) Easily implementable retrospectively (Dont want to write it all again :) ) Doesnt impact to much on performance What do you think of my prefered solution, the last one in the list above? Is there any alternative solution I didnt mention, that would fit better? You dont have to answer every question in detail. Just push me in the right direction. I very much appreciate every well-grounded opinion. Thanks in advance!

  Read the article

• AngularJS recursive directive with a dynamic HTML template (bounty)

  - by Nazar Sobchuk

  I have a realy hard task here. I am working on an AngularJS web app, which is capable of sending different HTTP methods to our project's Restful Web Service and receiving responses in JSON. Basicaly it looks like this: You can create some REST resource from this application. Let's say an exam. To create an exam - you pick a resource from a list of available resources. This triggers a function, that sends a request to localhost:8080/STEP/api/explain/resorceName and gets a description for this resource. Description looks like this: http://jsonblob.com/534fc022e4b0bb44248d6460 After receiving a response - I start building input fields like follows (allFields - array of field objects for this resource, enumValues - enum values for resource's field if it's property isEnum = true): <div ng-repeat="field in allFields"> <div ng-show={{!field.isEnum}}> <p ng-show={{field.isRequired}}>{{field.name}}*: </p> <p ng-show={{!field.isRequired}}>{{field.name}}: </p> <input type="text" ng-model="updateEntityResource[field.name]" ng-change="getUpdateEntityAsText()" class="form-control" placeholder="{{parseClassName(field.type)}}"> </div> <div ng-show={{field.isEnum}}> <p ng-show={{field.isRequired}}>{{field.name}}*: </p> <p ng-show={{!field.isRequired}}>{{field.name}}: </p> <select ng-model="updateEntityResource[field.name]" ng-change="getUpdateEntityAsText()" class="form-control"> <option></option> <option ng-repeat="enumValue in field.enumValues" label={{enumValue.name}}>{{enumValue.ordinal}}</option> </select> </div> </div> Now, the problem. I need to create a recursive directive, which would be capable of generating fields in such maner as described above for every resource's field that has "restResourceName" not null. To get all it's fields you just send a request to localhost:8080/STEP/api/explain/restResourceName and get similar JSON response as shown above, which is then used to build HTML elements for inputing values into model. Does anyone know how this can be achieved using angular recursive directive? Every useful answer is highly appreciated and evaluated. The correct answer will get +50 or I will start a bounty, because I'm realy stuck with this for 2 days. If you need any additional info - let me know. Thank you.

  Read the article

• Exceptions confusion

  - by Misiur

  Hi there. I'm trying to build site using OOP in PHP. Everyone is talking about Singleton, hermetization, MVC, and using exceptions. So I've tried to do it like this: Class building whole site: class Core { public $is_core; public $theme; private $db; public $language; private $info; static private $instance; public function __construct($lang = 'eng', $theme = 'default') { if(!self::$instance) { try { $this->db = new sdb(DB_TYPE.':host='.DB_HOST.';dbname='.DB_NAME, DB_USER, DB_PASS); } catch(PDOException $e) { throw new CoreException($e->getMessage()); } try { $this->language = new Language($lang); } catch(LangException $e) { throw new CoreException($e->getMessage()); } try { $this->theme = new Theme($theme); } catch(ThemeException $e) { throw new CoreException($e->getMessage()); } } return self::$instance; } public function getSite($what) { return $this->language->getLang(); } private function __clone() { } } Class managing themes class Theme { private $theme; public function __construct($name = 'default') { if(!is_dir("themes/$name")) { throw new ThemeException("Unable to load theme $name"); } else { $this->theme = $name; } } public function getTheme() { return $this->theme; } public function display($part) { if(!is_file("themes/$this->theme/$part.php")) { throw new ThemeException("Unable to load theme part: themes/$this->theme/$part.php"); } else { return 'So far so good'; } } } And usage: error_reporting(E_ALL); require_once('config.php'); require_once('functions.php'); try { $core = new Core(); } catch(CoreException $e) { echo 'Core Exception: '.$e->getMessage(); } echo $core->theme->getTheme(); echo "<br />"; echo $core->language->getLang(); try { $core->theme->display('footer'); } catch(ThemeException $e) { echo $e->getMessage(); } I don't like those exception handlers - i don't want to catch them like some pokemons... I want to use things simple: $core-theme-display('footer'); And if something is wrong, and debug mode is enabled, then aplication show error. What should i do?

  Read the article

• synchronized in java - Proper use

  - by ZoharYosef

  I'm building a simple program to use in multi processes (Threads). My question is more to understand - when I have to use a reserved word synchronized? Do I need to use this word in any method that affects the bone variables? I know I can put it on any method that is not static, but I want to understand more. thank you! here is the code: public class Container { // *** data members *** public static final int INIT_SIZE=10; // the first (init) size of the set. public static final int RESCALE=10; // the re-scale factor of this set. private int _sp=0; public Object[] _data; /************ Constructors ************/ public Container(){ _sp=0; _data = new Object[INIT_SIZE]; } public Container(Container other) { // copy constructor this(); for(int i=0;i<other.size();i++) this.add(other.at(i)); } /** return true is this collection is empty, else return false. */ public synchronized boolean isEmpty() {return _sp==0;} /** add an Object to this set */ public synchronized void add (Object p){ if (_sp==_data.length) rescale(RESCALE); _data[_sp] = p; // shellow copy semantic. _sp++; } /** returns the actual amount of Objects contained in this collection */ public synchronized int size() {return _sp;} /** returns true if this container contains an element which is equals to ob */ public synchronized boolean isMember(Object ob) { return get(ob)!=-1; } /** return the index of the first object which equals ob, if none returns -1 */ public synchronized int get(Object ob) { int ans=-1; for(int i=0;i<size();i=i+1) if(at(i).equals(ob)) return i; return ans; } /** returns the element located at the ind place in this container (null if out of range) */ public synchronized Object at(int p){ if (p>=0 && p<size()) return _data[p]; else return null; }

  Read the article

• Domain-Driven-Design question

  - by Michael

  Hello everyone, I have a question about DDD. I'm building a application to learn DDD and I have a question about layering. I have an application that works like this: UI layer calls = Application Layer - Domain Layer - Database Here is a small example of how the code looks: //****************UI LAYER************************ //Uses Ioc to get the service from the factory. //This factory would be in the MyApp.Infrastructure.dll IImplementationFactory factory = new ImplementationFactory(); //Interface and implementation for Shopping Cart service would be in MyApp.ApplicationLayer.dll IShoppingCartService service = factory.GetImplementationFactory<IShoppingCartService>(); //This is the UI layer, //Calling into Application Layer //to get the shopping cart for a user. //Interface for IShoppingCart would be in MyApp.ApplicationLayer.dll //and implementation for IShoppingCart would be in MyApp.Model. IShoppingCart shoppingCart = service.GetShoppingCartByUserName(userName); //Show shopping cart information. //For example, items bought, price, taxes..etc ... //Pressed Purchase button, so even for when //button is pressed. //Uses Ioc to get the service from the factory again. IImplementationFactory factory = new ImplementationFactory(); IShoppingCartService service = factory.GetImplementationFactory<IShoppingCartService>(); service.Purchase(shoppingCart); //**********************Application Layer********************** public class ShoppingCartService : IShoppingCartService { public IShoppingCart GetShoppingCartByUserName(string userName) { //Uses Ioc to get the service from the factory. //This factory would be in the MyApp.Infrastructure.dll IImplementationFactory factory = new ImplementationFactory(); //Interface for repository would be in MyApp.Infrastructure.dll //but implementation would by in MyApp.Model.dll IShoppingCartRepository repository = factory.GetImplementationFactory<IShoppingCartRepository>(); IShoppingCart shoppingCart = repository.GetShoppingCartByUserName(username); //Do shopping cart logic like calculating taxes and stuff //I would put these in services but not sure? ... return shoppingCart; } public void Purchase(IShoppingCart shoppingCart) { //Do Purchase logic and calling out to repository ... } } I've seem to put most of my business rules in services rather than the models and I'm not sure if this is correct? Also, i'm not completely sure if I have the laying correct? Do I have the right pieces in the correct place? Also should my models leave my domain model? In general I'm I doing this correct according DDD? Thanks!

  Read the article

• Defining a select list through controller and view model

  - by Ibrar Hussain

  I have a View Model that looks like this: public class SomeViewModel { public SomeViewModel(IEnumerable<SelectListItem> orderTemplatesListItems) { OrderTemplateListItems = orderTemplatesListItems; } public IEnumerable<SelectListItem> OrderTemplateListItems { get; set; } } I then have an Action in my Controller that does this: public ActionResult Index() { var items = _repository.GetTemplates(); var selectList = items.Select(i => new SelectListItem { Text = i.Name, Value = i.Id.ToString() }).ToList(); var viewModel = new SomeViewModel { OrderTemplateListItems = selectList }; return View(viewModel); } Lastly my view: @Html.DropDownListFor(n => n.OrderTemplateListItems, new SelectList(Model.OrderTemplateListItems, "value", "text"), "Please select an order template") The code works fine and my select list populates wonderfully. Next thing I need to do is set the selected value that will come from a Session["orderTemplateId"] which is set when the user selects a particular option from the list. Now after looking online the fourth parameter should allow me to set a selected value, so if I do this: @Html.DropDownListFor(n => n.OrderTemplateListItems, new SelectList(Model.OrderTemplateListItems, "value", "text", 56), "Please select an order template") 56 is the Id of the item that I want selected, but to no avail. I then thought why not do it in the Controller? As a final attempt I tried building up my select list items in my Controller and then passing the items into the View: public ActionResult Index() { var items = _repository.GetTemplates(); var orderTemplatesList = new List<SelectListItem>(); foreach (var item in items) { if (Session["orderTemplateId"] != null) { if (item.Id.ToString() == Session["orderTemplateId"].ToString()) { orderTemplatesList.Add(new SelectListItem { Text = item.Name, Value = item.Id.ToString(), Selected = true }); } else { orderTemplatesList.Add(new SelectListItem { Text = item.Name, Value = item.Id.ToString() }); } } else { orderTemplatesList.Add(new SelectListItem { Text = item.Name, Value = item.Id.ToString() }); } } var viewModel = new SomeViewModel { OrderTemplateListItems = orderTemplatesList }; return View(viewModel); } Leaving my View like so: @Html.DropDownListFor(n => n.OrderTemplateListItems, new SelectList(Model.OrderTemplateListItems, "value", "text"), "Please select an order template") Nothing! Why isn't this working for me?

  Read the article

• .htaccess mod_rewrite URL query

  - by 1001001

  I was hoping someone could help me out. I'm building a CRM application and need help modifying the .htaccess file to clean up the URLs. I've read every post regarding .htaccess and mod_rewrite and I've even tried using http://www.generateit.net/mod-rewrite/ to obtain the results with no success. Here is what I am attempting to do. Let's call the base URL www.domain.com We are using php with a mysql back-end and some jQuery and javascript In that "root" folder is my .htaccess file. I'm not sure if I need a .htaccess file in each subdirectory or if one in the root is enough. We have several actual directories of files including "crm", "sales", "finance", etc. First off we want to strip off all the ".php" extensions which I am able to do myself thanks to these posts. However, the querying of the company and contact IDs are where I am stuck. Right now if I load www.domain.com/crm/companies.php it displays all the companies in a list. If I click on one of the companies it uses javascript to call a "goto_company(x)" jQuery script that writes a form and submit that form based on the ID (x) of the company. This works fine and keeps the links clean as all the end user sees is www.domain.com/crm/company.php. However you can't navigate directly to a company. So we added a few lines in PHP to see if the POST is null and try a GET instead allowing us to do www.domain.com/crm/company.php?companyID=40 which displays company #40 out of the database. I need to rewrite this link, and all other associated links to www.domain.com/crm/company/40 I've tried everything and nothing seems to work. Keep in mind that I need to do this for "contacts" and also on the sales portion of the app will need to do something for "deals". To summarize here's what I am looking to do: Change www.domain.com/crm/dash.php to www.domain.com/crm/dash Change www.domain.com/crm/company.php?companyID=40 to www.domain.com/crm/company/40 Change www.domain.com/crm/contact.php?contactID=27 to www.domain.com/crm/contact/27 Change www.domain.com/sales/dash.php to www.domain.com/sales/dash Change www.domain.com/sales/deal.php?dealID=6 to www.domain.com/sales/deal/6 (40, 27, and 6 are just arbitrary numbers as examples) Just for reference, when I used the generateit.net/mod-rewrite site using www.domain.com/crm/company.php?companyID=40 as an example, here is what it told me to put in my .htaccess file: Options +FollowSymLinks RewriteEngine On RewriteRule ^crm/company/([^/]*)$ /crm/company.php?companyID=$1 [L] Needless to say that didn't work.

  Read the article

• Threadpool with pasistant worker instances

  - by Matt Smokey-waters Holmes

  So basically what im trying to do is queue up tasks in a thread pool to be executed as soon as a worker becomes free, i have found various examples of this but in all cases the examples have been setup to use a new Worker instance for each job, i want persistent workers. Im trying to make a ftp backup tool, i have it working but because of the limitations of a single connection it is slow. What i ideally want to do is have a single connection for scanning directories and building up a file list then four workers to download said files. Here is an example of my worker /** * FTP Worker */ public class Worker implements Runnable { protected FTPClient _ftp; // Connection details protected String _host = ""; protected String _user = ""; protected String _pass = ""; // worker status protected boolean _working = false; public Worker(String host, String user, String pass) { this._host = host; this._user = user; this._pass = pass; } // Check if the worker is in use public boolean inUse() { return this._working; } @Override public void run() { this._ftp = new FTPClient(); this._connect(); } // Download a file from the ftp server public boolean download(String base, String path, String file) { this._working = true; boolean outcome = true; //create directory if not exists File pathDir = new File(base + path); if (!pathDir.exists()) { pathDir.mkdirs(); } //download file try { OutputStream output = new FileOutputStream(base + path + file); this._ftp.retrieveFile(file, output); output.close(); } catch (Exception e) { outcome = false; } finally { this._working = false; return outcome; } } // Connect to the server protected boolean _connect() { try { this._ftp.connect(this._host); this._ftp.login(this._user, this._pass); } catch (Exception e) { return false; } return this._ftp.isConnected(); } // Disconnect from the server protected void _disconnect() { try { this._ftp.disconnect(); } catch (Exception e) { /* do nothing */ } } } and basically i want to be able to call Worker.download(...) for each task in a queue whenever a worker becomes available without having to create a new connection to the ftp server for each download Any help would be appreciated as iv'e never used threads before and I'm going round in circles at the moment

  Read the article

• PHP looping through an array to fetch a value for each key from database (third normal form)

  - by zomboble

  I am building a system, mostly for consolidating learning but will be used in practice. I will try and verbally explain the part of the E-R diagram I am focusing on: Each cadet can have many uniformID's Each Uniform ID is a new entry in table uniform, so cadets (table) may look like: id | name | ... | uniformID 1 | Example | ... | 1,2,3 uniform table: id | notes | cadet 1 | Need new blahh | 1 2 | Some stuff needed | 1 3 | Whatever you like | 1 On second thought, looks like I wont need that third column in the db. I am trying to iterate through each id in uniformID, code: <?php $cadet = $_GET['id']; // set from URL $query = mysql_query("SELECT `uniformID` FROM `cadets` WHERE id = '$cadet' LIMIT 1") or die(mysql_error()); // get uniform needed as string // store it while ($row = mysql_fetch_array($query)) { $uniformArray = $row['uniformID']; } echo $uniformArray . " "; $exploded = explode(",", $uniformArray); // convert into an array // for each key in the array perform a new query foreach ($exploded as $key => $value) { $query(count($exploded)); $query[$key] = mysql_query("SELECT * FROM `uniform` WHERE `id` = '$value'"); } ? As I say, this is mainly for consolidation purposes but I have come up with a error, sql is saying: Fatal error: Function name must be a string in C:\wamp\www\intranet\uniform.php on line 82 line 82 is: $query[$key] = mysql_query("SELECT * FROM `uniform` WHERE `id` = '$value'"); I wasn't sure it would work so I tried it and now i'm stuck! EDIT: Thanks to everyone who has contributed to this! This is now the working code: foreach ($exploded as $key => $value) { //$query(count($exploded)); $query = mysql_query("SELECT * FROM `uniform` WHERE `id` = '$value'"); while ($row = mysql_fetch_array($query)) { echo "<tr> <td>" . $row['id'] . "</td> <td>" . $row['note'] . "</td> </tr>"; } } Added the while and did the iteration by nesting it in the foreach

  Read the article

• refactoring this function in Java

  - by Joel

  Hi folks, I'm learning Java, and I know one of the big complaints about newbie programmers is that we make really long and involved methods that should be broken into several. Well here is one I wrote and is a perfect example. :-D. public void buildBall(){ /* sets the x and y value for the center of the canvas */ double i = ((getWidth() / 2)); double j = ((getHeight() / 2)); /* randomizes the start speed of the ball */ vy = 3.0; vx = rgen.nextDouble(1.0, 3.0); if (rgen.nextBoolean(.05)) vx = -vx; /* creates the ball */ GOval ball = new GOval(i,j,(2 *BALL_RADIUS),(2 * BALL_RADIUS)); ball.setFilled(true); ball.setFillColor(Color.RED); add(ball); /* animates the ball */ while(true){ i = (i + (vx* 2)); j = (j + (vy* 2)); if (i > APPLICATION_WIDTH-(2 * BALL_RADIUS)){ vx = -vx; } if (j > APPLICATION_HEIGHT-(2 * BALL_RADIUS)){ vy = -vy; } if (i < 0){ vx = -vx; } if (j < 0){ vy = -vy; } ball.move(vx + vx, vy + vy); pause(10); /* checks the edges of the ball to see if it hits an object */ colider = getElementAt(i, j); if (colider == null){ colider = getElementAt(i + (2*BALL_RADIUS), j); } if (colider == null){ colider = getElementAt(i + (2*BALL_RADIUS), j + (2*BALL_RADIUS)); } if (colider == null){ colider = getElementAt(i, j + (2*BALL_RADIUS)); } /* If the ball hits an object it reverses direction */ if (colider != null){ vy = -vy; /* removes bricks when hit but not the paddle */ if (j < (getHeight() -(PADDLE_Y_OFFSET + PADDLE_HEIGHT))){ remove(colider); } } } You can see from the title of the method that I started with good intentions of "building the ball". There are a few issues I ran up against: The problem is that then I needed to move the ball, so I created that while loop. I don't see any other way to do that other than just keep it "true", so that means any other code I create below this loop won't happen. I didn't make the while loop a different function because I was using those variables i and j. So I don't see how I can refactor beyond this loop. So my main question is: How would I pass the values of i and j to a new method: "animateBall" and how would I use ball.move(vx + vx, vy + vy); in that new method if ball has been declared in the buildBall method? I understand this is probably a simple thing of better understanding variable scope and passing arguments, but I'm not quite there yet...

  Read the article

< Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >