base de datos - Page 365

dropdown list;servlet Problem

- by user294750

I try to excute the servlet code given, like an exemple to understand how it works. BUT I did not understand from where the attribut optionDAO and what is the necessity to use it. The find method seems like the given by hibernate in package".base". What should I really do to skip this. Thanks.

Read the article

A free standing ASP.NET Pager Web Control

- by Rick Strahl

Paging in ASP.NET has been relatively easy with stock controls supporting basic paging functionality. However, recently I built an MVC application and one of the things I ran into was that I HAD TO build manual paging support into a few of my pages. Dealing with list controls and rendering markup is easy enough, but doing paging is a little more involved. I ended up with a small but flexible component that can be dropped anywhere. As it turns out the task of creating a semi-generic Pager control for MVC was fairly easily. Now I’m back to working in Web Forms and thought to myself that the way I created the pager in MVC actually would also work in ASP.NET – in fact quite a bit easier since the whole thing can be conveniently wrapped up into an easily reusable control. A standalone pager would provider easier reuse in various pages and a more consistent pager display regardless of what kind of 'control’ the pager is associated with. Why a Pager Control? At first blush it might sound silly to create a new pager control – after all Web Forms has pretty decent paging support, doesn’t it? Well, sort of. Yes the GridView control has automatic paging built in and the ListView control has the related DataPager control. The built in ASP.NET paging has several issues though: Postback and JavaScript requirements If you look at paging links in ASP.NET they are always postback links with javascript:__doPostback() calls that go back to the server. While that works fine and actually has some benefit like the fact that paging saves changes to the page and post them back, it’s not very SEO friendly. Basically if you use javascript based navigation nosearch engine will follow the paging links which effectively cuts off list content on the first page. The DataPager control does support GET based links via the QueryStringParameter property, but the control is effectively tied to the ListView control (which is the only control that implements IPageableItemContainer). DataSource Controls required for Efficient Data Paging Retrieval The only way you can get paging to work efficiently where only the few records you display on the page are queried for and retrieved from the database you have to use a DataSource control - only the Linq and Entity DataSource controls support this natively. While you can retrieve this data yourself manually, there’s no way to just assign the page number and render the pager based on this custom subset. Other than that default paging requires a full resultset for ASP.NET to filter the data and display only a subset which can be very resource intensive and wasteful if you’re dealing with largish resultsets (although I’m a firm believer in returning actually usable sets :-}). If you use your own business layer that doesn’t fit an ObjectDataSource you’re SOL. That’s a real shame too because with LINQ based querying it’s real easy to retrieve a subset of data that is just the data you want to display but the native Pager functionality doesn’t support just setting properties to display just the subset AFAIK. DataPager is not Free Standing The DataPager control is the closest thing to a decent Pager implementation that ASP.NET has, but alas it’s not a free standing component – it works off a related control and the only one that it effectively supports from the stock ASP.NET controls is the ListView control. This means you can’t use the same data pager formatting for a grid and a list view or vice versa and you’re always tied to the control. Paging Events In order to handle paging you have to deal with paging events. The events fire at specific time instances in the page pipeline and because of this you often have to handle data binding in a way to work around the paging events or else end up double binding your data sources based on paging. Yuk. Styling The GridView pager is a royal pain to beat into submission for styled rendering. The DataPager control has many more options and template layout and it renders somewhat cleaner, but it too is not exactly easy to get a decent display for. Not a Generic Solution The problem with the ASP.NET controls too is that it’s not generic. GridView, DataGrid use their own internal paging, ListView can use a DataPager and if you want to manually create data layout – well you’re on your own. IOW, depending on what you use you likely have very different looking Paging experiences. So, I figured I’ve struggled with this once too many and finally sat down and built a Pager control. The Pager Control My goal was to create a totally free standing control that has no dependencies on other controls and certainly no requirements for using DataSource controls. The idea is that you should be able to use this pager control without any sort of data requirements at all – you should just be able to set properties and be able to display a pager. The Pager control I ended up with has the following features: Completely free standing Pager control – no control or data dependencies Complete manual control – Pager can render without any data dependency Easy to use: Only need to set PageSize, ActivePage and TotalItems Supports optional filtering of IQueryable for efficient queries and Pager rendering Supports optional full set filtering of IEnumerable<T> and DataTable Page links are plain HTTP GET href Links Control automatically picks up Page links on the URL and assigns them (automatic page detection no page index changing events to hookup) Full CSS Styling support On the downside there’s no templating support for the control so the layout of the pager is relatively fixed. All elements however are stylable and there are options to control the text, and layout options such as whether to display first and last pages and the previous/next buttons and so on. To give you an idea what the pager looks like, here are two differently styled examples (all via CSS): The markup for these two pagers looks like this: <ww:Pager runat="server" id="ItemPager" PageSize="5" PageLinkCssClass="gridpagerbutton" SelectedPageCssClass="gridpagerbutton-selected" PagesTextCssClass="gridpagertext" CssClass="gridpager" RenderContainerDiv="true" ContainerDivCssClass="gridpagercontainer" MaxPagesToDisplay="6" PagesText="Item Pages:" NextText="next" PreviousText="previous" /> <ww:Pager runat="server" id="ItemPager2" PageSize="5" RenderContainerDiv="true" MaxPagesToDisplay="6" /> The latter example uses default style settings so it there’s not much to set. The first example on the other hand explicitly assigns custom styles and overrides a few of the formatting options. Styling The styling is based on a number of CSS classes of which the the main pager, pagerbutton and pagerbutton-selected classes are the important ones. Other styles like pagerbutton-next/prev/first/last are based on the pagerbutton style. The default styling shown for the red outlined pager looks like this: .pagercontainer { margin: 20px 0; background: whitesmoke; padding: 5px; } .pager { float: right; font-size: 10pt; text-align: left; } .pagerbutton,.pagerbutton-selected,.pagertext { display: block; float: left; text-align: center; border: solid 2px maroon; min-width: 18px; margin-left: 3px; text-decoration: none; padding: 4px; } .pagerbutton-selected { font-size: 130%; font-weight: bold; color: maroon; border-width: 0px; background: khaki; } .pagerbutton-first { margin-right: 12px; } .pagerbutton-last,.pagerbutton-prev { margin-left: 12px; } .pagertext { border: none; margin-left: 30px; font-weight: bold; } .pagerbutton a { text-decoration: none; } .pagerbutton:hover { background-color: maroon; color: cornsilk; } .pagerbutton-prev { background-image: url(images/prev.png); background-position: 2px center; background-repeat: no-repeat; width: 35px; padding-left: 20px; } .pagerbutton-next { background-image: url(images/next.png); background-position: 40px center; background-repeat: no-repeat; width: 35px; padding-right: 20px; margin-right: 0px; } Yup that’s a lot of styling settings although not all of them are required. The key ones are pagerbutton, pager and pager selection. The others (which are implicitly created by the control based on the pagerbutton style) are for custom markup of the ‘special’ buttons. In my apps I tend to have two kinds of pages: Those that are associated with typical ‘grid’ displays that display purely tabular data and those that have a more looser list like layout. The two pagers shown above represent these two views and the pager and gridpager styles in my standard style sheet reflect these two styles. Configuring the Pager with Code Finally lets look at what it takes to hook up the pager. As mentioned in the highlights the Pager control is completely independent of other controls so if you just want to display a pager on its own it’s as simple as dropping the control and assigning the PageSize, ActivePage and either TotalPages or TotalItems. So for this markup: <ww:Pager runat="server" id="ItemPagerManual" PageSize="5" MaxPagesToDisplay="6" /> I can use code as simple as: ItemPagerManual.PageSize = 3; ItemPagerManual.ActivePage = 4;ItemPagerManual.TotalItems = 20; Note that ActivePage is not required - it will automatically use any Page=x query string value and assign it, although you can override it as I did above. TotalItems can be any value that you retrieve from a result set or manually assign as I did above. A more realistic scenario based on a LINQ to SQL IQueryable result is even easier. In this example, I have a UserControl that contains a ListView control that renders IQueryable data. I use a User Control here because there are different views the user can choose from with each view being a different user control. This incidentally also highlights one of the nice features of the pager: Because the pager is independent of the control I can put the pager on the host page instead of into each of the user controls. IOW, there’s only one Pager control, but there are potentially many user controls/listviews that hold the actual display data. The following code demonstrates how to use the Pager with an IQueryable that loads only the records it displays: protected voidPage_Load(objectsender, EventArgs e) { Category = Request.Params["Category"] ?? string.Empty; IQueryable<wws_Item> ItemList = ItemRepository.GetItemsByCategory(Category); // Update the page and filter the list down ItemList = ItemPager.FilterIQueryable<wws_Item>(ItemList); // Render user control with a list view Control ulItemList = LoadControl("~/usercontrols/" + App.Configuration.ItemListType + ".ascx"); ((IInventoryItemListControl)ulItemList).InventoryItemList = ItemList; phItemList.Controls.Add(ulItemList); // placeholder } The code uses a business object to retrieve Items by category as an IQueryable which means that the result is only an expression tree that hasn’t execute SQL yet and can be further filtered. I then pass this IQueryable to the FilterIQueryable() helper method of the control which does two main things: Filters the IQueryable to retrieve only the data displayed on the active page Sets the Totaltems property and calculates TotalPages on the Pager and that’s it! When the Pager renders it uses those values, plus the PageSize and ActivePage properties to render the Pager. In addition to IQueryable there are also filter methods for IEnumerable<T> and DataTable, but these versions just filter the data by removing rows/items from the entire already retrieved data. Output Generated and Paging Links The output generated creates pager links as plain href links. Here’s what the output looks like: <div id="ItemPager" class="pagercontainer"> <div class="pager"> <span class="pagertext">Pages: </span><a href="http://localhost/WestWindWebStore/itemlist.aspx?Page=1" class="pagerbutton" />1</a> <a href="http://localhost/WestWindWebStore/itemlist.aspx?Page=2" class="pagerbutton" />2</a> <a href="http://localhost/WestWindWebStore/itemlist.aspx?Page=3" class="pagerbutton" />3</a> <span class="pagerbutton-selected">4</span> <a href="http://localhost/WestWindWebStore/itemlist.aspx?Page=5" class="pagerbutton" />5</a> <a href="http://localhost/WestWindWebStore/itemlist.aspx?Page=6" class="pagerbutton" />6</a> <a href="http://localhost/WestWindWebStore/itemlist.aspx?Page=20" class="pagerbutton pagerbutton-last" />20</a> <a href="http://localhost/WestWindWebStore/itemlist.aspx?Page=3" class="pagerbutton pagerbutton-prev" />Prev</a> <a href="http://localhost/WestWindWebStore/itemlist.aspx?Page=5" class="pagerbutton pagerbutton-next" />Next</a></div> <br clear="all" /> </div> </div> The links point back to the current page and simply append a Page= page link into the page. When the page gets reloaded with the new page number the pager automatically detects the page number and automatically assigns the ActivePage property which results in the appropriate page to be displayed. The code shown in the previous section is all that’s needed to handle paging. Note that HTTP GET based paging is different than the Postback paging ASP.NET uses by default. Postback paging preserves modified page content when clicking on pager buttons, but this control will simply load a new page – no page preservation at this time. The advantage of not using Postback paging is that the URLs generated are plain HTML links that a search engine can follow where __doPostback() links are not. Pager with a Grid The pager also works in combination with grid controls so it’s easy to bypass the grid control’s paging features if desired. In the following example I use a gridView control and binds it to a DataTable result which is also filterable by the Pager control. The very basic plain vanilla ASP.NET grid markup looks like this: <div style="width: 600px; margin: 0 auto;padding: 20px; "> <asp:DataGrid runat="server" AutoGenerateColumns="True" ID="gdItems" CssClass="blackborder" style="width: 600px;"> <AlternatingItemStyle CssClass="gridalternate" /> <HeaderStyle CssClass="gridheader" /> </asp:DataGrid> <ww:Pager runat="server" ID="Pager" CssClass="gridpager" ContainerDivCssClass="gridpagercontainer" PageLinkCssClass="gridpagerbutton" SelectedPageCssClass="gridpagerbutton-selected" PageSize="8" RenderContainerDiv="true" MaxPagesToDisplay="6" /> </div> and looks like this when rendered: using custom set of CSS styles. The code behind for this code is also very simple: protected void Page_Load(object sender, EventArgs e) { string category = Request.Params["category"] ?? ""; busItem itemRep = WebStoreFactory.GetItem(); var items = itemRep.GetItemsByCategory(category) .Select(itm => new {Sku = itm.Sku, Description = itm.Description}); // run query into a DataTable for demonstration DataTable dt = itemRep.Converter.ToDataTable(items,"TItems"); // Remove all items not on the current page dt = Pager.FilterDataTable(dt,0); // bind and display gdItems.DataSource = dt; gdItems.DataBind(); } A little contrived I suppose since the list could already be bound from the list of elements, but this is to demonstrate that you can also bind against a DataTable if your business layer returns those. Unfortunately there’s no way to filter a DataReader as it’s a one way forward only reader and the reader is required by the DataSource to perform the bindings. However, you can still use a DataReader as long as your business logic filters the data prior to rendering and provides a total item count (most likely as a second query). Control Creation The control itself is a pretty brute force ASP.NET control. Nothing clever about this other than some basic rendering logic and some simple calculations and update routines to determine which buttons need to be shown. You can take a look at the full code from the West Wind Web Toolkit’s Repository (note there are a few dependencies). To give you an idea how the control works here is the Render() method: /// <summary> /// overridden to handle custom pager rendering for runtime and design time /// </summary> /// <param name="writer"></param> protected override void Render(HtmlTextWriter writer) { base.Render(writer); if (TotalPages == 0 && TotalItems > 0) TotalPages = CalculateTotalPagesFromTotalItems(); if (DesignMode) TotalPages = 10; // don't render pager if there's only one page if (TotalPages < 2) return; if (RenderContainerDiv) { if (!string.IsNullOrEmpty(ContainerDivCssClass)) writer.AddAttribute("class", ContainerDivCssClass); writer.RenderBeginTag("div"); } // main pager wrapper writer.WriteBeginTag("div"); writer.AddAttribute("id", this.ClientID); if (!string.IsNullOrEmpty(CssClass)) writer.WriteAttribute("class", this.CssClass); writer.Write(HtmlTextWriter.TagRightChar + "\r\n"); // Pages Text writer.WriteBeginTag("span"); if (!string.IsNullOrEmpty(PagesTextCssClass)) writer.WriteAttribute("class", PagesTextCssClass); writer.Write(HtmlTextWriter.TagRightChar); writer.Write(this.PagesText); writer.WriteEndTag("span"); // if the base url is empty use the current URL FixupBaseUrl(); // set _startPage and _endPage ConfigurePagesToRender(); // write out first page link if (ShowFirstAndLastPageLinks && _startPage != 1) { writer.WriteBeginTag("a"); string pageUrl = StringUtils.SetUrlEncodedKey(BaseUrl, QueryStringPageField, (1).ToString()); writer.WriteAttribute("href", pageUrl); if (!string.IsNullOrEmpty(PageLinkCssClass)) writer.WriteAttribute("class", PageLinkCssClass + " " + PageLinkCssClass + "-first"); writer.Write(HtmlTextWriter.SelfClosingTagEnd); writer.Write("1"); writer.WriteEndTag("a"); writer.Write(" "); } // write out all the page links for (int i = _startPage; i < _endPage + 1; i++) { if (i == ActivePage) { writer.WriteBeginTag("span"); if (!string.IsNullOrEmpty(SelectedPageCssClass)) writer.WriteAttribute("class", SelectedPageCssClass); writer.Write(HtmlTextWriter.TagRightChar); writer.Write(i.ToString()); writer.WriteEndTag("span"); } else { writer.WriteBeginTag("a"); string pageUrl = StringUtils.SetUrlEncodedKey(BaseUrl, QueryStringPageField, i.ToString()).TrimEnd('&'); writer.WriteAttribute("href", pageUrl); if (!string.IsNullOrEmpty(PageLinkCssClass)) writer.WriteAttribute("class", PageLinkCssClass); writer.Write(HtmlTextWriter.SelfClosingTagEnd); writer.Write(i.ToString()); writer.WriteEndTag("a"); } writer.Write("\r\n"); } // write out last page link if (ShowFirstAndLastPageLinks && _endPage < TotalPages) { writer.WriteBeginTag("a"); string pageUrl = StringUtils.SetUrlEncodedKey(BaseUrl, QueryStringPageField, TotalPages.ToString()); writer.WriteAttribute("href", pageUrl); if (!string.IsNullOrEmpty(PageLinkCssClass)) writer.WriteAttribute("class", PageLinkCssClass + " " + PageLinkCssClass + "-last"); writer.Write(HtmlTextWriter.SelfClosingTagEnd); writer.Write(TotalPages.ToString()); writer.WriteEndTag("a"); } // Previous link if (ShowPreviousNextLinks && !string.IsNullOrEmpty(PreviousText) && ActivePage > 1) { writer.Write(" "); writer.WriteBeginTag("a"); string pageUrl = StringUtils.SetUrlEncodedKey(BaseUrl, QueryStringPageField, (ActivePage - 1).ToString()); writer.WriteAttribute("href", pageUrl); if (!string.IsNullOrEmpty(PageLinkCssClass)) writer.WriteAttribute("class", PageLinkCssClass + " " + PageLinkCssClass + "-prev"); writer.Write(HtmlTextWriter.SelfClosingTagEnd); writer.Write(PreviousText); writer.WriteEndTag("a"); } // Next link if (ShowPreviousNextLinks && !string.IsNullOrEmpty(NextText) && ActivePage < TotalPages) { writer.Write(" "); writer.WriteBeginTag("a"); string pageUrl = StringUtils.SetUrlEncodedKey(BaseUrl, QueryStringPageField, (ActivePage + 1).ToString()); writer.WriteAttribute("href", pageUrl); if (!string.IsNullOrEmpty(PageLinkCssClass)) writer.WriteAttribute("class", PageLinkCssClass + " " + PageLinkCssClass + "-next"); writer.Write(HtmlTextWriter.SelfClosingTagEnd); writer.Write(NextText); writer.WriteEndTag("a"); } writer.WriteEndTag("div"); if (RenderContainerDiv) { if (RenderContainerDivBreak) writer.Write("<br clear=\"all\" />\r\n"); writer.WriteEndTag("div"); } } As I said pretty much brute force rendering based on the control’s property settings of which there are quite a few: You can also see the pager in the designer above. unfortunately the VS designer (both 2010 and 2008) fails to render the float: left CSS styles properly and starts wrapping after margins are applied in the special buttons. Not a big deal since VS does at least respect the spacing (the floated elements overlay). Then again I’m not using the designer anyway :-}. Filtering Data What makes the Pager easy to use is the filter methods built into the control. While this functionality is clearly not the most politically correct design choice as it violates separation of concerns, it’s very useful for typical pager operation. While I actually have filter methods that do something similar in my business layer, having it exposed on the control makes the control a lot more useful for typical databinding scenarios. Of course these methods are optional – if you have a business layer that can provide filtered page queries for you can use that instead and assign the TotalItems property manually. There are three filter method types available for IQueryable, IEnumerable and for DataTable which tend to be the most common use cases in my apps old and new. The IQueryable version is pretty simple as it can simply rely on on .Skip() and .Take() with LINQ: /// <summary> /// <summary> /// Queries the database for the ActivePage applied manually /// or from the Request["page"] variable. This routine /// figures out and sets TotalPages, ActivePage and /// returns a filtered subset IQueryable that contains /// only the items from the ActivePage. /// </summary> /// <param name="query"></param> /// <param name="activePage"> /// The page you want to display. Sets the ActivePage property when passed. /// Pass 0 or smaller to use ActivePage setting. /// </param> /// <returns></returns> public IQueryable<T> FilterIQueryable<T>(IQueryable<T> query, int activePage) where T : class, new() { ActivePage = activePage < 1 ? ActivePage : activePage; if (ActivePage < 1) ActivePage = 1; TotalItems = query.Count(); if (TotalItems <= PageSize) { ActivePage = 1; TotalPages = 1; return query; } int skip = ActivePage - 1; if (skip > 0) query = query.Skip(skip * PageSize); _TotalPages = CalculateTotalPagesFromTotalItems(); return query.Take(PageSize); } The IEnumerable<T> version simply converts the IEnumerable to an IQuerable and calls back into this method for filtering. The DataTable version requires a little more work to manually parse and filter records (I didn’t want to add the Linq DataSetExtensions assembly just for this): /// <summary> /// Filters a data table for an ActivePage. /// /// Note: Modifies the data set permanently by remove DataRows /// </summary> /// <param name="dt">Full result DataTable</param> /// <param name="activePage">Page to display. 0 to use ActivePage property </param> /// <returns></returns> public DataTable FilterDataTable(DataTable dt, int activePage) { ActivePage = activePage < 1 ? ActivePage : activePage; if (ActivePage < 1) ActivePage = 1; TotalItems = dt.Rows.Count; if (TotalItems <= PageSize) { ActivePage = 1; TotalPages = 1; return dt; } int skip = ActivePage - 1; if (skip > 0) { for (int i = 0; i < skip * PageSize; i++ ) dt.Rows.RemoveAt(0); } while(dt.Rows.Count > PageSize) dt.Rows.RemoveAt(PageSize); return dt; } Using the Pager Control The pager as it is is a first cut I built a couple of weeks ago and since then have been tweaking a little as part of an internal project I’m working on. I’ve replaced a bunch of pagers on various older pages with this pager without any issues and have what now feels like a more consistent user interface where paging looks and feels the same across different controls. As a bonus I’m only loading the data from the database that I need to display a single page. With the preset class tags applied too adding a pager is now as easy as dropping the control and adding the style sheet for styling to be consistent – no fuss, no muss. Schweet. Hopefully some of you may find this as useful as I have or at least as a baseline to build ontop of… Resources The Pager is part of the West Wind Web & Ajax Toolkit Pager.cs Source Code (some toolkit dependencies) Westwind.css base stylesheet with .pager and .gridpager styles Pager Example Page © Rick Strahl, West Wind Technologies, 2005-2010Posted in ASP.NET

Read the article

Building a better mouse-trap – Improving the creation of XML Message Requests using Reflection, XML & XSLT

- by paulschapman

Introduction The way I previously created messages to send to the GovTalk service I used the XMLDocument to create the request. While this worked it left a number of problems; not least that for every message a special function would need to created. This is OK for the short term but the biggest cost in any software project is maintenance and this would be a headache to maintain. So the following is a somewhat better way of achieving the same thing. For the purposes of this article I am going to be using the CompanyNumberSearch request of the GovTalk service – although this technique would work for any service that accepted XML. The C# functions which send and receive the messages remain the same. The magic sauce in this is the XSLT which defines the structure of the request, and the use of objects in conjunction with reflection to provide the content. It is a bit like Sweet Chilli Sauce added to Chicken on a bed of rice. So on to the Sweet Chilli Sauce The Sweet Chilli Sauce The request to search for a company based on it’s number is as follows; <GovTalkMessage xsi:schemaLocation="http://www.govtalk.gov.uk/CM/envelope http://xmlgw.companieshouse.gov.uk/v1-0/schema/Egov_ch-v2-0.xsd" xmlns="http://www.govtalk.gov.uk/CM/envelope" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#" xmlns:gt="http://www.govtalk.gov.uk/schemas/govtalk/core" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" > <EnvelopeVersion>1.0</EnvelopeVersion> <Header> <MessageDetails> <Class>NumberSearch</Class> <Qualifier>request</Qualifier> <TransactionID>1</TransactionID> </MessageDetails> <SenderDetails> <IDAuthentication> <SenderID>????????????????????????????????</SenderID> <Authentication> <Method>CHMD5</Method> <Value>????????????????????????????????</Value> </Authentication> </IDAuthentication> </SenderDetails> </Header> <GovTalkDetails> <Keys/> </GovTalkDetails> <Body> <NumberSearchRequest xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlgw.companieshouse.gov.uk/v1-0/schema/NumberSearch.xsd"> <PartialCompanyNumber>99999999</PartialCompanyNumber> <DataSet>LIVE</DataSet> <SearchRows>1</SearchRows> </NumberSearchRequest> </Body> </GovTalkMessage> This is the XML that we send to the GovTalk Service and we get back a list of companies that match the criteria passed A message is structured in two parts; The envelope which identifies the person sending the request, with the name of the request, and the body which gives the detail of the company we are looking for. The Chilli What makes it possible is the use of XSLT to define the message – and serialization to convert each request object into XML. To start we need to create an object which will represent the contents of the message we are sending. However there is a common properties in all the messages that we send to Companies House. These properties are as follows SenderId – the id of the person sending the message SenderPassword – the password associated with Id TransactionId – Unique identifier for the message AuthenticationValue – authenticates the request Because these properties are unique to the Companies House message, and because they are shared with all messages they are perfect candidates for a base class. The class is as follows; using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Security.Cryptography; using System.Text; using System.Text.RegularExpressions; using Microsoft.WindowsAzure.ServiceRuntime; namespace CompanyHub.Services { public class GovTalkRequest { public GovTalkRequest() { try { SenderID = RoleEnvironment.GetConfigurationSettingValue("SenderId"); SenderPassword = RoleEnvironment.GetConfigurationSettingValue("SenderPassword"); TransactionId = DateTime.Now.Ticks.ToString(); AuthenticationValue = EncodePassword(String.Format("{0}{1}{2}", SenderID, SenderPassword, TransactionId)); } catch (System.Exception ex) { throw ex; } } /// <summary> /// returns the Sender ID to be used when communicating with the GovTalk Service /// </summary> public String SenderID { get; set; } /// <summary> /// return the password to be used when communicating with the GovTalk Service /// </summary> public String SenderPassword { get; set; } // end SenderPassword /// <summary> /// Transaction Id - uses the Time and Date converted to Ticks /// </summary> public String TransactionId { get; set; } // end TransactionId /// <summary> /// calculate the authentication value that will be used when /// communicating with /// </summary> public String AuthenticationValue { get; set; } // end AuthenticationValue property /// <summary> /// encodes password(s) using MD5 /// </summary> /// <param name="clearPassword"></param> /// <returns></returns> public static String EncodePassword(String clearPassword) { MD5CryptoServiceProvider md5Hasher = new MD5CryptoServiceProvider(); byte[] hashedBytes; UTF32Encoding encoder = new UTF32Encoding(); hashedBytes = md5Hasher.ComputeHash(ASCIIEncoding.Default.GetBytes(clearPassword)); String result = Regex.Replace(BitConverter.ToString(hashedBytes), "-", "").ToLower(); return result; } } } There is nothing particularly clever here, except for the EncodePassword method which hashes the value made up of the SenderId, Password and Transaction id. Each message inherits from this object. So for the Company Number Search in addition to the properties above we need a partial number, which dataset to search – for the purposes of the project we only need to search the LIVE set so this can be set in the constructor and the SearchRows. Again all are set as properties. With the SearchRows and DataSet initialized in the constructor. public class CompanyNumberSearchRequest : GovTalkRequest, IDisposable { /// <summary> /// /// </summary> public CompanyNumberSearchRequest() : base() { DataSet = "LIVE"; SearchRows = 1; } /// <summary> /// Company Number to search against /// </summary> public String PartialCompanyNumber { get; set; } /// <summary> /// What DataSet should be searched for the company /// </summary> public String DataSet { get; set; } /// <summary> /// How many rows should be returned /// </summary> public int SearchRows { get; set; } public void Dispose() { DataSet = String.Empty; PartialCompanyNumber = String.Empty; DataSet = "LIVE"; SearchRows = 1; } } As well as inheriting from our base class, I have also inherited from IDisposable – not just because it is just plain good practice to dispose of objects when coding, but it gives also gives us more versatility when using the object. There are four stages in making a request and this is reflected in the four methods we execute in making a call to the Companies House service; Create a request Send a request Check the status If OK then get the results of the request I’ve implemented each of these stages within a static class called Toolbox – which also means I don’t need to create an instance of the class to use it. When making a request there are three stages; Get the template for the message Serialize the object representing the message Transform the serialized object using a predefined XSLT file. Each of my templates I have defined as an embedded resource. When retrieving a resource of this kind we have to include the full namespace to the resource. In making the code re-usable as much as possible I defined the full ‘path’ within the GetRequest method. requestFile = String.Format("CompanyHub.Services.Schemas.{0}", RequestFile); So we now have the full path of the file within the assembly. Now all we need do is retrieve the assembly and get the resource. asm = Assembly.GetExecutingAssembly(); sr = asm.GetManifestResourceStream(requestFile); Once retrieved So this can be returned to the calling function and we now have a stream of XSLT to define the message. Time now to serialize the request to create the other side of this message. // Serialize object containing Request, Load into XML Document t = Obj.GetType(); ms = new MemoryStream(); serializer = new XmlSerializer(t); xmlTextWriter = new XmlTextWriter(ms, Encoding.ASCII); serializer.Serialize(xmlTextWriter, Obj); ms = (MemoryStream)xmlTextWriter.BaseStream; GovTalkRequest = Toolbox.ConvertByteArrayToString(ms.ToArray()); First off we need the type of the object so we make a call to the GetType method of the object containing the Message properties. Next we need a MemoryStream, XmlSerializer and an XMLTextWriter so these can be initialized. The object is serialized by making the call to the Serialize method of the serializer object. The result of that is then converted into a MemoryStream. That MemoryStream is then converted into a string. ConvertByteArrayToString This is a fairly simple function which uses an ASCIIEncoding object found within the System.Text namespace to convert an array of bytes into a string. public static String ConvertByteArrayToString(byte[] bytes) { System.Text.ASCIIEncoding enc = new System.Text.ASCIIEncoding(); return enc.GetString(bytes); } I only put it into a function because I will be using this in various places. The Sauce When adding support for other messages outside of creating a new object to store the properties of the message, the C# components do not need to change. It is in the XSLT file that the versatility of the technique lies. The XSLT file determines the format of the message. For the CompanyNumberSearch the XSLT file is as follows; <?xml version="1.0"?> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:template match="/"> <GovTalkMessage xsi:schemaLocation="http://www.govtalk.gov.uk/CM/envelope http://xmlgw.companieshouse.gov.uk/v1-0/schema/Egov_ch-v2-0.xsd" xmlns="http://www.govtalk.gov.uk/CM/envelope" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#" xmlns:gt="http://www.govtalk.gov.uk/schemas/govtalk/core" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" > <EnvelopeVersion>1.0</EnvelopeVersion> <Header> <MessageDetails> <Class>NumberSearch</Class> <Qualifier>request</Qualifier> <TransactionID> <xsl:value-of select="CompanyNumberSearchRequest/TransactionId"/> </TransactionID> </MessageDetails> <SenderDetails> <IDAuthentication> <SenderID><xsl:value-of select="CompanyNumberSearchRequest/SenderID"/></SenderID> <Authentication> <Method>CHMD5</Method> <Value> <xsl:value-of select="CompanyNumberSearchRequest/AuthenticationValue"/> </Value> </Authentication> </IDAuthentication> </SenderDetails> </Header> <GovTalkDetails> <Keys/> </GovTalkDetails> <Body> <NumberSearchRequest xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlgw.companieshouse.gov.uk/v1-0/schema/NumberSearch.xsd"> <PartialCompanyNumber> <xsl:value-of select="CompanyNumberSearchRequest/PartialCompanyNumber"/> </PartialCompanyNumber> <DataSet> <xsl:value-of select="CompanyNumberSearchRequest/DataSet"/> </DataSet> <SearchRows> <xsl:value-of select="CompanyNumberSearchRequest/SearchRows"/> </SearchRows> </NumberSearchRequest> </Body> </GovTalkMessage> </xsl:template> </xsl:stylesheet> The outer two tags define that this is a XSLT stylesheet and the root tag from which the nodes are searched for. The GovTalkMessage is the format of the message that will be sent to Companies House. We first set up the XslCompiledTransform object which will transform the XSLT template and the serialized object into the request to Companies House. xslt = new XslCompiledTransform(); resultStream = new MemoryStream(); writer = new XmlTextWriter(resultStream, Encoding.ASCII); doc = new XmlDocument(); The Serialize method require XmlTextWriter to write the XML (writer) and a stream to place the transferred object into (writer). The XML will be loaded into an XMLDocument object (doc) prior to the transformation. // create XSLT Template xslTemplate = Toolbox.GetRequest(Template); xslTemplate.Seek(0, SeekOrigin.Begin); templateReader = XmlReader.Create(xslTemplate); xslt.Load(templateReader); I have stored all the templates as a series of Embedded Resources and the GetRequestCall takes the name of the template and extracts the relevent XSLT file. /// <summary> /// Gets the framwork XML which makes the request /// </summary> /// <param name="RequestFile"></param> /// <returns></returns> public static Stream GetRequest(String RequestFile) { String requestFile = String.Empty; Stream sr = null; Assembly asm = null; try { requestFile = String.Format("CompanyHub.Services.Schemas.{0}", RequestFile); asm = Assembly.GetExecutingAssembly(); sr = asm.GetManifestResourceStream(requestFile); } catch (Exception) { throw; } finally { asm = null; } return sr; } // end private static stream GetRequest We first take the template name and expand it to include the full namespace to the Embedded Resource I like to keep all my schemas in the same directory and so the namespace reflects this. The rest is the default namespace for the project. Then we get the currently executing assembly (which will contain the resources with the call to GetExecutingAssembly() ) Finally we get a stream which contains the XSLT file. We use this stream and then load an XmlReader with the contents of the template, and that is in turn loaded into the XslCompiledTransform object. We convert the object containing the message properties into Xml by serializing it; calling the Serialize() method of the XmlSerializer object. To set up the object we do the following; t = Obj.GetType(); ms = new MemoryStream(); serializer = new XmlSerializer(t); xmlTextWriter = new XmlTextWriter(ms, Encoding.ASCII); We first determine the type of the object being transferred by calling GetType() We create an XmlSerializer object by passing the type of the object being serialized. The serializer writes to a memory stream and that is linked to an XmlTextWriter. Next job is to serialize the object and load it into an XmlDocument. serializer.Serialize(xmlTextWriter, Obj); ms = (MemoryStream)xmlTextWriter.BaseStream; xmlRequest = new XmlTextReader(ms); GovTalkRequest = Toolbox.ConvertByteArrayToString(ms.ToArray()); doc.LoadXml(GovTalkRequest); Time to transform the XML to construct the full request. xslt.Transform(doc, writer); resultStream.Seek(0, SeekOrigin.Begin); request = Toolbox.ConvertByteArrayToString(resultStream.ToArray()); So that creates the full request to be sent to Companies House. Sending the request So far we have a string with a request for the Companies House service. Now we need to send the request to the Companies House Service. Configuration within an Azure project There are entire blog entries written about configuration within an Azure project – most of this is out of scope for this article but the following is a summary. Configuration is defined in two files within the parent project *.csdef which contains the definition of configuration setting. <?xml version="1.0" encoding="utf-8"?> <ServiceDefinition name="OnlineCompanyHub" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition"> <WebRole name="CompanyHub.Host"> <InputEndpoints> <InputEndpoint name="HttpIn" protocol="http" port="80" /> </InputEndpoints> <ConfigurationSettings> <Setting name="DiagnosticsConnectionString" /> <Setting name="DataConnectionString" /> </ConfigurationSettings> </WebRole> <WebRole name="CompanyHub.Services"> <InputEndpoints> <InputEndpoint name="HttpIn" protocol="http" port="8080" /> </InputEndpoints> <ConfigurationSettings> <Setting name="DiagnosticsConnectionString" /> <Setting name="SenderId"/> <Setting name="SenderPassword" /> <Setting name="GovTalkUrl"/> </ConfigurationSettings> </WebRole> <WorkerRole name="CompanyHub.Worker"> <ConfigurationSettings> <Setting name="DiagnosticsConnectionString" /> </ConfigurationSettings> </WorkerRole> </ServiceDefinition> Above is the configuration definition from the project. What we are interested in however is the ConfigurationSettings tag of the CompanyHub.Services WebRole. There are four configuration settings here, but at the moment we are interested in the second to forth settings; SenderId, SenderPassword and GovTalkUrl The value of these settings are defined in the ServiceDefinition.cscfg file; <?xml version="1.0"?> <ServiceConfiguration serviceName="OnlineCompanyHub" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration"> <Role name="CompanyHub.Host"> <Instances count="2" /> <ConfigurationSettings> <Setting name="DiagnosticsConnectionString" value="UseDevelopmentStorage=true" /> <Setting name="DataConnectionString" value="UseDevelopmentStorage=true" /> </ConfigurationSettings> </Role> <Role name="CompanyHub.Services"> <Instances count="2" /> <ConfigurationSettings> <Setting name="DiagnosticsConnectionString" value="UseDevelopmentStorage=true" /> <Setting name="SenderId" value="UserID"/> <Setting name="SenderPassword" value="Password"/> <Setting name="GovTalkUrl" value="http://xmlgw.companieshouse.gov.uk/v1-0/xmlgw/Gateway"/> </ConfigurationSettings> </Role> <Role name="CompanyHub.Worker"> <Instances count="2" /> <ConfigurationSettings> <Setting name="DiagnosticsConnectionString" value="UseDevelopmentStorage=true" /> </ConfigurationSettings> </Role> </ServiceConfiguration> Look for the Role tag that contains our project name (CompanyHub.Services). Having configured the parameters we can now transmit the request. This is done by ‘POST’ing a stream of XML to the Companies House servers. govTalkUrl = RoleEnvironment.GetConfigurationSettingValue("GovTalkUrl"); request = WebRequest.Create(govTalkUrl); request.Method = "POST"; request.ContentType = "text/xml"; writer = new StreamWriter(request.GetRequestStream()); writer.WriteLine(RequestMessage); writer.Close(); We use the WebRequest object to send the object. Set the method of sending to ‘POST’ and the type of data as text/xml. Once set up all we do is write the request to the writer – this sends the request to Companies House. Did the Request Work Part I – Getting the response Having sent a request – we now need the result of that request. response = request.GetResponse(); reader = response.GetResponseStream(); result = Toolbox.ConvertByteArrayToString(Toolbox.ReadFully(reader)); The WebRequest object has a GetResponse() method which allows us to get the response sent back. Like many of these calls the results come in the form of a stream which we convert into a string. Did the Request Work Part II – Translating the Response Much like XSLT and XML were used to create the original request, so it can be used to extract the response and by deserializing the result we create an object that contains the response. Did it work? It would be really great if everything worked all the time. Of course if it did then I don’t suppose people would pay me and others the big bucks so that our programmes do not a) Collapse in a heap (this is an area of memory) b) Blow every fuse in the place in a shower of sparks (this will probably not happen this being real life and not a Hollywood movie, but it was possible to blow the sound system of a BBC Model B with a poorly coded setting) c) Go nuts and trap everyone outside the airlock (this was from a movie, and unless NASA get a manned moon/mars mission set up unlikely to happen) d) Go nuts and take over the world (this was also from a movie, but please note life has a habit of being of exceeding the wildest imaginations of Hollywood writers (note writers – Hollywood executives have no imagination and judging by recent output of that town have turned plagiarism into an art form). e) Freeze in total confusion because the cleaner pulled the plug to the internet router (this has happened) So anyway – we need to check to see if our request actually worked. Within the GovTalk response there is a section that details the status of the message and a description of what went wrong (if anything did). I have defined an XSLT template which will extract these into an XML document. <?xml version="1.0"?> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ev="http://www.govtalk.gov.uk/CM/envelope" xmlns:gt="http://www.govtalk.gov.uk/schemas/govtalk/core" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <xsl:template match="/"> <GovTalkStatus xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <Status> <xsl:value-of select="ev:GovTalkMessage/ev:Header/ev:MessageDetails/ev:Qualifier"/> </Status> <Text> <xsl:value-of select="ev:GovTalkMessage/ev:GovTalkDetails/ev:GovTalkErrors/ev:Error/ev:Text"/> </Text> <Location> <xsl:value-of select="ev:GovTalkMessage/ev:GovTalkDetails/ev:GovTalkErrors/ev:Error/ev:Location"/> </Location> <Number> <xsl:value-of select="ev:GovTalkMessage/ev:GovTalkDetails/ev:GovTalkErrors/ev:Error/ev:Number"/> </Number> <Type> <xsl:value-of select="ev:GovTalkMessage/ev:GovTalkDetails/ev:GovTalkErrors/ev:Error/ev:Type"/> </Type> </GovTalkStatus> </xsl:template> </xsl:stylesheet> Only thing different about previous XSL files is the references to two namespaces ev & gt. These are defined in the GovTalk response at the top of the response; xsi:schemaLocation="http://www.govtalk.gov.uk/CM/envelope http://xmlgw.companieshouse.gov.uk/v1-0/schema/Egov_ch-v2-0.xsd" xmlns="http://www.govtalk.gov.uk/CM/envelope" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#" xmlns:gt="http://www.govtalk.gov.uk/schemas/govtalk/core" If we do not put these references into the XSLT template then the XslCompiledTransform object will not be able to find the relevant tags. Deserialization is a fairly simple activity. encoder = new ASCIIEncoding(); ms = new MemoryStream(encoder.GetBytes(statusXML)); serializer = new XmlSerializer(typeof(GovTalkStatus)); xmlTextWriter = new XmlTextWriter(ms, Encoding.ASCII); messageStatus = (GovTalkStatus)serializer.Deserialize(ms); We set up a serialization object using the object type containing the error state and pass to it the results of a transformation between the XSLT above and the GovTalk response. Now we have an object containing any error state, and the error message. All we need to do is check the status. If there is an error then we can flag an error. If not then we extract the results and pass that as an object back to the calling function. We go this by guess what – defining an XSLT template for the result and using that to create an Xml Stream which can be deserialized into a .Net object. In this instance the XSLT to create the result of a Company Number Search is; <?xml version="1.0" encoding="us-ascii"?> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ev="http://www.govtalk.gov.uk/CM/envelope" xmlns:sch="http://xmlgw.companieshouse.gov.uk/v1-0/schema" exclude-result-prefixes="ev"> <xsl:template match="/"> <CompanySearchResult xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <CompanyNumber> <xsl:value-of select="ev:GovTalkMessage/ev:Body/sch:NumberSearch/sch:CoSearchItem/sch:CompanyNumber"/> </CompanyNumber> <CompanyName> <xsl:value-of select="ev:GovTalkMessage/ev:Body/sch:NumberSearch/sch:CoSearchItem/sch:CompanyName"/> </CompanyName> </CompanySearchResult> </xsl:template> </xsl:stylesheet> and the object definition is; using System; using System.Collections.Generic; using System.Linq; using System.Web; namespace CompanyHub.Services { public class CompanySearchResult { public CompanySearchResult() { CompanyNumber = String.Empty; CompanyName = String.Empty; } public String CompanyNumber { get; set; } public String CompanyName { get; set; } } } Our entire code to make calls to send a request, and interpret the results are; String request = String.Empty; String response = String.Empty; GovTalkStatus status = null; fault = null; try { using (CompanyNumberSearchRequest requestObj = new CompanyNumberSearchRequest()) { requestObj.PartialCompanyNumber = CompanyNumber; request = Toolbox.CreateRequest(requestObj, "CompanyNumberSearch.xsl"); response = Toolbox.SendGovTalkRequest(request); status = Toolbox.GetMessageStatus(response); if (status.Status.ToLower() == "error") { fault = new HubFault() { Message = status.Text }; } else { Object obj = Toolbox.GetGovTalkResponse(response, "CompanyNumberSearchResult.xsl", typeof(CompanySearchResult)); } } } catch (FaultException<ArgumentException> ex) { fault = new HubFault() { FaultType = ex.Detail.GetType().FullName, Message = ex.Detail.Message }; } catch (System.Exception ex) { fault = new HubFault() { FaultType = ex.GetType().FullName, Message = ex.Message }; } finally { } Wrap up So there we have it – a reusable set of functions to send and interpret XML results from an internet based service. The code is reusable with a little change with any service which uses XML as a transport mechanism – and as for the Companies House GovTalk service all I need to do is create various objects for the result and message sent and the relevent XSLT files. I might need minor changes for other services but something like 70-90% will be exactly the same.

Read the article

A first look at ConfORM - Part 1

- by thangchung

All source codes for this post can be found at here.Have you ever heard of ConfORM is not? I have read it three months ago when I wrote an post about NHibernate and Autofac. At that time, this project really has just started and still in beta version, so I still do not really care much. But recently when reading a book by Jason Dentler NHibernate 3.0 Cookbook, I started to pay attention to it. Author have mentioned quite a lot of OSS in his book. And now again I have reviewed ConfORM once again. I have been involved in ConfORM development group on google and read some articles about it. Fabio Maulo spent a lot of work for the OSS, and I hope it will adapt a great way for NHibernate (because he contributed to NHibernate that). So what is ConfORM? It is stand for Configuration ORM, and it was trying to use a lot of heuristic model for identifying entities from C# code. Today, it's mostly Model First Driven development, so the first thing is to build the entity model. This is really important and we can see it is the heart of business software. Then we have to tell DB about the entity of this model. We often will use Inversion Engineering here, Database Schema is will create based on recently Entity Model. From now we will absolutely not interested in the DB again, only focus on the Entity Model.Fluent NHibenate really good, I liked this OSS. Sharp Architecture and has done so well in Fluent NHibernate integration with applications. A Multiple Database technical in Sharp Architecture is truly awesome. It can receive configuration, a connection string and a dll containing entity model, which would then create a SessionFactory, finally caching inside the computer memory. As the number of SessionFactory can be very large and will full of the memory, it has also devised a way of caching SessionFactory in the file. This post I hope this will not completely explain about and building a model of multiple databases. I just tried to mount a number of posts from the community and apply some of my knowledge to build a management model Session for ConfORM.As well as Fluent NHibernate, ConfORM also supported on the interface mapping, see this to understand it. So the first thing we will build the Entity Model for it, and here is what I will use the model for this article. A simple model for managing news and polls, it will be too easy for a number of people, but I hope not to bring complexity to this post.I will then have some code to build super type for the Entity Model. public interface IEntity<TId> { TId Id { get; set; } } public abstract class EntityBase<TId> : IEntity<TId> { public virtual TId Id { get; set; } public override bool Equals(object obj) { return Equals(obj as EntityBase<TId>); } private static bool IsTransient(EntityBase<TId> obj) { return obj != null && Equals(obj.Id, default(TId)); } private Type GetUnproxiedType() { return GetType(); } public virtual bool Equals(EntityBase<TId> other) { if (other == null) return false; if (ReferenceEquals(this, other)) return true; if (!IsTransient(this) && !IsTransient(other) && Equals(Id, other.Id)) { var otherType = other.GetUnproxiedType(); var thisType = GetUnproxiedType(); return thisType.IsAssignableFrom(otherType) || otherType.IsAssignableFrom(thisType); } return false; } public override int GetHashCode() { if (Equals(Id, default(TId))) return base.GetHashCode(); return Id.GetHashCode(); } } Database schema will be created as:The next step is to build the ConORM builder to create a NHibernate Configuration. Patrick have a excellent article about it at here. Contract of it below: public interface IConfigBuilder { Configuration BuildConfiguration(string connectionString, string sessionFactoryName); } The idea here is that I will pass in a connection string and a set of the DLL containing the Entity Model and it makes me a NHibernate Configuration (shame that I stole this ideas of Sharp Architecture). And here is its code: public abstract class ConfORMConfigBuilder : RootObject, IConfigBuilder { private static IConfigurator _configurator; protected IEnumerable<Type> DomainTypes; private readonly IEnumerable<string> _assemblies; protected ConfORMConfigBuilder(IEnumerable<string> assemblies) : this(new Configurator(), assemblies) { _assemblies = assemblies; } protected ConfORMConfigBuilder(IConfigurator configurator, IEnumerable<string> assemblies) { _configurator = configurator; _assemblies = assemblies; } public abstract void GetDatabaseIntegration(IDbIntegrationConfigurationProperties dBIntegration, string connectionString); protected abstract HbmMapping GetMapping(); public Configuration BuildConfiguration(string connectionString, string sessionFactoryName) { Contract.Requires(!string.IsNullOrEmpty(connectionString), "ConnectionString is null or empty"); Contract.Requires(!string.IsNullOrEmpty(sessionFactoryName), "SessionFactory name is null or empty"); Contract.Requires(_configurator != null, "Configurator is null"); return CatchExceptionHelper.TryCatchFunction( () => { DomainTypes = GetTypeOfEntities(_assemblies); if (DomainTypes == null) throw new Exception("Type of domains is null"); var configure = new Configuration(); configure.SessionFactoryName(sessionFactoryName); configure.Proxy(p => p.ProxyFactoryFactory<ProxyFactoryFactory>()); configure.DataBaseIntegration(db => GetDatabaseIntegration(db, connectionString)); if (_configurator.GetAppSettingString("IsCreateNewDatabase").ConvertToBoolean()) { configure.SetProperty("hbm2ddl.auto", "create-drop"); } configure.Properties.Add("default_schema", _configurator.GetAppSettingString("DefaultSchema")); configure.AddDeserializedMapping(GetMapping(), _configurator.GetAppSettingString("DocumentFileName")); SchemaMetadataUpdater.QuoteTableAndColumns(configure); return configure; }, Logger); } protected IEnumerable<Type> GetTypeOfEntities(IEnumerable<string> assemblies) { var type = typeof(EntityBase<Guid>); var domainTypes = new List<Type>(); foreach (var assembly in assemblies) { var realAssembly = Assembly.LoadFrom(assembly); if (realAssembly == null) throw new NullReferenceException(); domainTypes.AddRange(realAssembly.GetTypes().Where( t => { if (t.BaseType != null) return string.Compare(t.BaseType.FullName, type.FullName) == 0; return false; })); } return domainTypes; } } I do not want to dependency on any RDBMS, so I made a builder as an abstract class, and so I will create a concrete instance for SQL Server 2008 as follows: public class SqlServerConfORMConfigBuilder : ConfORMConfigBuilder { public SqlServerConfORMConfigBuilder(IEnumerable<string> assemblies) : base(assemblies) { } public override void GetDatabaseIntegration(IDbIntegrationConfigurationProperties dBIntegration, string connectionString) { dBIntegration.Dialect<MsSql2008Dialect>(); dBIntegration.Driver<SqlClientDriver>(); dBIntegration.KeywordsAutoImport = Hbm2DDLKeyWords.AutoQuote; dBIntegration.IsolationLevel = IsolationLevel.ReadCommitted; dBIntegration.ConnectionString = connectionString; dBIntegration.LogSqlInConsole = true; dBIntegration.Timeout = 10; dBIntegration.LogFormatedSql = true; dBIntegration.HqlToSqlSubstitutions = "true 1, false 0, yes 'Y', no 'N'"; } protected override HbmMapping GetMapping() { var orm = new ObjectRelationalMapper(); orm.Patterns.PoidStrategies.Add(new GuidPoidPattern()); var patternsAppliers = new CoolPatternsAppliersHolder(orm); //patternsAppliers.Merge(new DatePropertyByNameApplier()).Merge(new MsSQL2008DateTimeApplier()); patternsAppliers.Merge(new ManyToOneColumnNamingApplier()); patternsAppliers.Merge(new OneToManyKeyColumnNamingApplier(orm)); var mapper = new Mapper(orm, patternsAppliers); var entities = new List<Type>(); DomainDefinition(orm); Customize(mapper); entities.AddRange(DomainTypes); return mapper.CompileMappingFor(entities); } private void DomainDefinition(IObjectRelationalMapper orm) { orm.TablePerClassHierarchy(new[] { typeof(EntityBase<Guid>) }); orm.TablePerClass(DomainTypes); orm.OneToOne<News, Poll>(); orm.ManyToOne<Category, News>(); orm.Cascade<Category, News>(Cascade.All); orm.Cascade<News, Poll>(Cascade.All); orm.Cascade<User, Poll>(Cascade.All); } private static void Customize(Mapper mapper) { CustomizeRelations(mapper); CustomizeTables(mapper); CustomizeColumns(mapper); } private static void CustomizeRelations(Mapper mapper) { } private static void CustomizeTables(Mapper mapper) { } private static void CustomizeColumns(Mapper mapper) { mapper.Class<Category>( cm => { cm.Property(x => x.Name, m => m.NotNullable(true)); cm.Property(x => x.CreatedDate, m => m.NotNullable(true)); }); mapper.Class<News>( cm => { cm.Property(x => x.Title, m => m.NotNullable(true)); cm.Property(x => x.ShortDescription, m => m.NotNullable(true)); cm.Property(x => x.Content, m => m.NotNullable(true)); }); mapper.Class<Poll>( cm => { cm.Property(x => x.Value, m => m.NotNullable(true)); cm.Property(x => x.VoteDate, m => m.NotNullable(true)); cm.Property(x => x.WhoVote, m => m.NotNullable(true)); }); mapper.Class<User>( cm => { cm.Property(x => x.UserName, m => m.NotNullable(true)); cm.Property(x => x.Password, m => m.NotNullable(true)); }); } } As you can see that we can do so many things in this class, such as custom entity relationships, custom binding on the columns, custom table name, ... Here I only made two so-Appliers for OneToMany and ManyToOne relationships, you can refer to it here public class ManyToOneColumnNamingApplier : IPatternApplier<PropertyPath, IManyToOneMapper> { #region IPatternApplier<PropertyPath,IManyToOneMapper> Members public void Apply(PropertyPath subject, IManyToOneMapper applyTo) { applyTo.Column(subject.ToColumnName() + "Id"); } #endregion #region IPattern<PropertyPath> Members public bool Match(PropertyPath subject) { return subject != null; } #endregion } public class OneToManyKeyColumnNamingApplier : OneToManyPattern, IPatternApplier<PropertyPath, ICollectionPropertiesMapper> { public OneToManyKeyColumnNamingApplier(IDomainInspector domainInspector) : base(domainInspector) { } #region Implementation of IPattern<PropertyPath> public bool Match(PropertyPath subject) { return Match(subject.LocalMember); } #endregion Implementation of IPattern<PropertyPath> #region Implementation of IPatternApplier<PropertyPath,ICollectionPropertiesMapper> public void Apply(PropertyPath subject, ICollectionPropertiesMapper applyTo) { applyTo.Key(km => km.Column(GetKeyColumnName(subject))); } #endregion Implementation of IPatternApplier<PropertyPath,ICollectionPropertiesMapper> protected virtual string GetKeyColumnName(PropertyPath subject) { Type propertyType = subject.LocalMember.GetPropertyOrFieldType(); Type childType = propertyType.DetermineCollectionElementType(); var entity = subject.GetContainerEntity(DomainInspector); var parentPropertyInChild = childType.GetFirstPropertyOfType(entity); var baseName = parentPropertyInChild == null ? subject.PreviousPath == null ? entity.Name : entity.Name + subject.PreviousPath : parentPropertyInChild.Name; return GetKeyColumnName(baseName); } protected virtual string GetKeyColumnName(string baseName) { return string.Format("{0}Id", baseName); } } Everyone also can download the ConfORM source at google code and see example inside it. Next part I will write about multiple database factory. Hope you enjoy about it. happy coding and see you next part.

Read the article

Jframe using multiple classes?

- by user2945880

and im trying to make it so it can show multiple classes at once Jframe: import javax.swing.JFrame; import java.awt.BorderLayout; public class Concert { public static void main(String[] args) { JFrame frame = new JFrame(); frame.setSize(1000, 800); frame.setTitle("Concert!"); frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); Concertbackground component = new Concertbackground(); BandComponent component1 = new BandComponent(); frame.add(component, BorderLayout.NORTH); frame.add(component1, BorderLayout.CENTER); frame.setVisible(true); } } These are the two classes mentioned in the Jframe: import java.awt.Color; import java.awt.Graphics; import java.awt.Graphics2D; import java.awt.Rectangle; import java.awt.geom.Ellipse2D; import java.awt.geom.Line2D; import javax.swing.JComponent; import java.awt.Polygon; /* BandComponent.java Justin Walker 10/27/13 */ public class BandComponent extends JComponent { public void paintComponent(Graphics g) { // Recover Graphics2D Graphics2D g2 = (Graphics2D) g; int xScale = 250; int yScale = 100; int x = 343; int y = 343; //singer Polygon sing = new Polygon(); sing.addPoint(667 ,208 + xScale); sing.addPoint(676,213 + xScale); sing.addPoint(678,217 + xScale); sing.addPoint(682,221 + xScale); sing.addPoint(681,224 + xScale); sing.addPoint(680,231 + xScale); sing.addPoint(676,242 + xScale); sing.addPoint(672,244 + xScale); sing.addPoint(672,250 + xScale); sing.addPoint(682,248 + xScale); sing.addPoint(713,244 + xScale); sing.addPoint(734,247 + xScale); sing.addPoint(750,247 + xScale); sing.addPoint(794,232 + xScale); sing.addPoint(800,231 + xScale); sing.addPoint(801,223 + xScale); sing.addPoint(807,219 + xScale); sing.addPoint(806,221 + xScale); sing.addPoint(806,229 + xScale); sing.addPoint(818,222 + xScale); sing.addPoint(820,223 + xScale); sing.addPoint(825,227 + xScale); sing.addPoint(825,240 + xScale); sing.addPoint(817,243 + xScale); sing.addPoint(807,245 + xScale); sing.addPoint(803,247 + xScale); sing.addPoint(801,252 + xScale); sing.addPoint(781,257 + xScale); sing.addPoint(762,264 + xScale); sing.addPoint(734,271 + xScale); sing.addPoint(701,286 + xScale); sing.addPoint(691,296 + xScale); sing.addPoint(693,311 + xScale); sing.addPoint(690,317 + xScale); sing.addPoint(690,335 + xScale); sing.addPoint(691,339 + xScale); sing.addPoint(689,343 + xScale); sing.addPoint(712,382 + xScale); sing.addPoint(725,400 + xScale); sing.addPoint(731,418 + xScale); sing.addPoint(731,428 + xScale); sing.addPoint(738,454 + xScale); sing.addPoint(741,460 + xScale); sing.addPoint(746,468 + xScale); sing.addPoint(766,468 + xScale); sing.addPoint(771,481 + xScale);// sing.addPoint(723,482 + xScale); sing.addPoint(720,462 + xScale); sing.addPoint(718,454 + xScale); sing.addPoint(709,436 + xScale); sing.addPoint(703,436 + xScale); sing.addPoint(699,417 + xScale); sing.addPoint(686,396 + xScale); sing.addPoint(678,395 + xScale); sing.addPoint(676,437 + xScale); sing.addPoint(673,439 + xScale); sing.addPoint(638,435 + xScale); sing.addPoint(640,398 + xScale); sing.addPoint(634,410 + xScale); sing.addPoint(625,416 + xScale); sing.addPoint(622,436 + xScale); sing.addPoint(622,443 + xScale); sing.addPoint(615,447 + xScale); sing.addPoint(609,456 + xScale); sing.addPoint(606,481 + xScale);// sing.addPoint(557,481 + xScale); sing.addPoint(560,467 + xScale); sing.addPoint(579,467 + xScale); sing.addPoint(587,464 + xScale); sing.addPoint(593,452 + xScale); sing.addPoint(594,441 + xScale); sing.addPoint(592,434 + xScale); sing.addPoint(600,416 + xScale); sing.addPoint(608,405 + xScale); sing.addPoint(609,394 + xScale); sing.addPoint(617,376 + xScale); sing.addPoint(619,363 + xScale); sing.addPoint(632,334 + xScale); sing.addPoint(637,324 + xScale); sing.addPoint(635,314 + xScale); sing.addPoint(639,296 + xScale); sing.addPoint(627,285 + xScale); sing.addPoint(600,279 + xScale); sing.addPoint(582,278 + xScale); sing.addPoint(575,275 + xScale); sing.addPoint(546,256 + xScale); sing.addPoint(536,252 + xScale); sing.addPoint(533,350 + xScale); sing.addPoint(534,361 + xScale); sing.addPoint(532,367 + xScale); sing.addPoint(529,369 + xScale); sing.addPoint(524,363 + xScale); sing.addPoint(525,355 + xScale); sing.addPoint(531,254 + xScale); sing.addPoint(527,249 + xScale); sing.addPoint(527,242 + xScale); sing.addPoint(529,237 + xScale); sing.addPoint(532,237 + xScale); sing.addPoint(536,178 + xScale); sing.addPoint(534,129 + xScale); sing.addPoint(535,123 + xScale); sing.addPoint(541,120 + xScale); sing.addPoint(545,123 + xScale); sing.addPoint(547,131 + xScale); sing.addPoint(545,173 + xScale); sing.addPoint(538,233 + xScale); sing.addPoint(549,239 + xScale); sing.addPoint(558,241 + xScale); sing.addPoint(585,257 + xScale); sing.addPoint(599,257 + xScale); sing.addPoint(627,254 + xScale); sing.addPoint(647,251 + xScale); sing.addPoint(653,248 + xScale); sing.addPoint(652,235 + xScale); sing.addPoint(648,226 + xScale); sing.addPoint(652,218 + xScale); sing.addPoint(661,212 + xScale); g2.setColor(Color.black); g2.fill(sing); g2.draw(sing); //guitar Polygon guitar = new Polygon(); guitar.addPoint(148,28); guitar.addPoint(158,32); guitar.addPoint(164,38); guitar.addPoint(168,46); guitar.addPoint(169,52); guitar.addPoint(167,60); guitar.addPoint(164,65); guitar.addPoint(165,70); guitar.addPoint(161,76); guitar.addPoint(158,92); guitar.addPoint(162,97); guitar.addPoint(161,102); guitar.addPoint(158,106); guitar.addPoint(155,108); guitar.addPoint(151,127); guitar.addPoint(152,133); guitar.addPoint(155,137); guitar.addPoint(151,146); guitar.addPoint(153,147); guitar.addPoint(160,142); guitar.addPoint(162,133); guitar.addPoint(162,123); guitar.addPoint(161,113); guitar.addPoint(162,110); guitar.addPoint(164,117); guitar.addPoint(169,131); guitar.addPoint(171,144); guitar.addPoint(170,159); guitar.addPoint(166,167); guitar.addPoint(166,171); guitar.addPoint(174,174); guitar.addPoint(183,184); guitar.addPoint(191,195); guitar.addPoint(196,198); guitar.addPoint(198,200); guitar.addPoint(199,210); guitar.addPoint(211,225); guitar.addPoint(212,233); guitar.addPoint(220,248); guitar.addPoint(233,260); guitar.addPoint(245,266); guitar.addPoint(248,268); guitar.addPoint(249,277); guitar.addPoint(205,275); guitar.addPoint(204,262); guitar.addPoint(187,238); guitar.addPoint(178,224); guitar.addPoint(177,216); guitar.addPoint(156,201); guitar.addPoint(146,197); guitar.addPoint(134,211); guitar.addPoint(128,229); guitar.addPoint(125,244);// guitar.addPoint(121,246); guitar.addPoint(107,248); guitar.addPoint(100,252); guitar.addPoint(97,258); guitar.addPoint(96,253); guitar.addPoint(89,258); guitar.addPoint(65,267); guitar.addPoint(63,274); guitar.addPoint(64,283); guitar.addPoint(41,282); guitar.addPoint(44,270); guitar.addPoint(47,264); guitar.addPoint(51,255); guitar.addPoint(73,238); guitar.addPoint(79,228); guitar.addPoint(97,222); guitar.addPoint(101,204); guitar.addPoint(102,181); guitar.addPoint(100,170); guitar.addPoint(95,161); guitar.addPoint(97,154); guitar.addPoint(91,152); guitar.addPoint(77,131); guitar.addPoint(65,123); guitar.addPoint(61,105); guitar.addPoint(64,94); guitar.addPoint(72,91); guitar.addPoint(78,82); guitar.addPoint(78,76); guitar.addPoint(70,73); guitar.addPoint(70,67); guitar.addPoint(93,51); guitar.addPoint(101,48); guitar.addPoint(111,52); guitar.addPoint(118,59); guitar.addPoint(119,70); guitar.addPoint(117,78); guitar.addPoint(113,79); guitar.addPoint(112,86); guitar.addPoint(111,88); guitar.addPoint(109,89); guitar.addPoint(109,92); guitar.addPoint(122,99);// guitar.addPoint(124,99); guitar.addPoint(133,96); guitar.addPoint(145,93); //guitar.addPoint(138,124); guitar.addPoint(150,69); guitar.addPoint(150,62); guitar.addPoint(155,58); guitar.addPoint(154,53); guitar.addPoint(149,50); guitar.addPoint(154,46); guitar.addPoint(153,38); guitar.addPoint(147,28); g2.setColor(Color.black); g2.fill(guitar); g2.draw(guitar); Polygon guitar2 = new Polygon (); guitar2.addPoint(141,108); guitar2.addPoint(139,126); guitar2.addPoint(135,122); guitar2.addPoint(128,122); guitar2.addPoint(129,116); guitar2.addPoint(143,108); g2.setColor(Color.white); g2.fill(guitar2); g2.draw(guitar2); //bass guitar Polygon bassgt = new Polygon (); bassgt.addPoint(871,21); bassgt.addPoint(879,24); bassgt.addPoint(885,32); bassgt.addPoint(886,42); bassgt.addPoint(895,47); bassgt.addPoint(904,56); bassgt.addPoint(907,69); bassgt.addPoint(909,83); bassgt.addPoint(910,91); bassgt.addPoint(941,81); bassgt.addPoint(946,75); bassgt.addPoint(945,67); bassgt.addPoint(950,67); bassgt.addPoint(955,75); bassgt.addPoint(960,68); bassgt.addPoint(963,74); bassgt.addPoint(967,72); bassgt.addPoint(971,66); bassgt.addPoint(973,70); bassgt.addPoint(981,67); bassgt.addPoint(984,71); bassgt.addPoint(982,76); bassgt.addPoint(987,80); bassgt.addPoint(986,82); bassgt.addPoint(980,83); bassgt.addPoint(979,90); bassgt.addPoint(974,85); bassgt.addPoint(970,86); bassgt.addPoint(973,91); bassgt.addPoint(965,86); bassgt.addPoint(960,90); bassgt.addPoint(961,100); bassgt.addPoint(955,92); bassgt.addPoint(944,91); bassgt.addPoint(907,103); bassgt.addPoint(906,109); bassgt.addPoint(893,114); bassgt.addPoint(895,123); bassgt.addPoint(900,131); bassgt.addPoint(904,134); bassgt.addPoint(908,145); bassgt.addPoint(911,159); bassgt.addPoint(918,171); bassgt.addPoint(919,190); bassgt.addPoint(923,198); bassgt.addPoint(919,201); bassgt.addPoint(919,210); bassgt.addPoint(927,220); bassgt.addPoint(942,226); bassgt.addPoint(944,234); bassgt.addPoint(909,230); bassgt.addPoint(905,214); bassgt.addPoint(899,204); bassgt.addPoint(893,203); bassgt.addPoint(889,171); bassgt.addPoint(877,151); bassgt.addPoint(861,152); bassgt.addPoint(852,169); bassgt.addPoint(849,203); bassgt.addPoint(841,210); bassgt.addPoint(840,228); bassgt.addPoint(828,233); bassgt.addPoint(806,235); bassgt.addPoint(805,228); bassgt.addPoint(822,219); bassgt.addPoint(824,204); bassgt.addPoint(817,201); bassgt.addPoint(822,196); bassgt.addPoint(822,184); bassgt.addPoint(828,162); bassgt.addPoint(829,152); bassgt.addPoint(820,149); bassgt.addPoint(811,144); bassgt.addPoint(806,134); bassgt.addPoint(805,117); bassgt.addPoint(820,107); bassgt.addPoint(819,89); bassgt.addPoint(811,83); bassgt.addPoint(811,77); bassgt.addPoint(824,66); bassgt.addPoint(825,61); bassgt.addPoint(842,53); bassgt.addPoint(852,43); bassgt.addPoint(853,29); bassgt.addPoint(870,20); g2.setColor(Color.black); g2.fill(bassgt); g2.draw(bassgt); Polygon bassgt2 = new Polygon(); bassgt2.addPoint(845,78); bassgt2.addPoint(845,98); bassgt2.addPoint(843,98); bassgt2.addPoint(842,105); bassgt2.addPoint(839,109); bassgt2.addPoint(834,103); bassgt2.addPoint(832,85); bassgt2.addPoint(845,78); g2.setColor(Color.white); g2.fill(bassgt2); g2.draw(bassgt2); Polygon drums = new Polygon (); drums.addPoint(713,104); drums.addPoint(706,121); drums.addPoint(721,377); drums.addPoint(248,380); drums.addPoint(253,228); drums.addPoint(250,206); drums.addPoint(237,178); drums.addPoint(206,166); drums.addPoint(201,154); drums.addPoint(198,152); drums.addPoint(208,148); drums.addPoint(236,150); drums.addPoint(247,130); drums.addPoint(227,119); drums.addPoint(219,105); drums.addPoint(222,96); drums.addPoint(233,88); drums.addPoint(251,84); drums.addPoint(272,83); drums.addPoint(300,91); drums.addPoint(285,72); drums.addPoint(294,57); drums.addPoint(319,46); drums.addPoint(372,45); drums.addPoint(406,50); drums.addPoint(428,65); drums.addPoint(433,74); drums.addPoint(450,58); drums.addPoint(478,48); drums.addPoint(514,48); drums.addPoint(544,51); drums.addPoint(566,52); drums.addPoint(577,67); drums.addPoint(575,79); drums.addPoint(561,95); drums.addPoint(545,98); drums.addPoint(525,105); drums.addPoint(524,147); drums.addPoint(524,183); drums.addPoint(645,175); drums.addPoint(662,143); drums.addPoint(617,152); drums.addPoint(608,148); drums.addPoint(614,139); drums.addPoint(633,128); drums.addPoint(661,116); drums.addPoint(659,107); drums.addPoint(625,114); drums.addPoint(592,113); drums.addPoint(571,111); drums.addPoint(565,102); drums.addPoint(576,86); drums.addPoint(616,70); drums.addPoint(647,66); drums.addPoint(679,67); drums.addPoint(695,72); drums.addPoint(699,90); drums.addPoint(678,100); drums.addPoint(667,103); drums.addPoint(672,113); drums.addPoint(689,105); drums.addPoint(709,106); g2.setColor(Color.black); g2.fill(drums); g2.draw(drums); } } The second class: import java.awt.Color; import java.awt.Graphics; import java.awt.Graphics2D; import java.awt.Rectangle; import java.awt.geom.Ellipse2D; import java.awt.geom.Line2D; import javax.swing.JComponent; import java.awt.GradientPaint; /* component that draws the concert background */ public class Concertbackground extends JComponent { public void paintComponent(Graphics g) { super.paintComponent(g); // Recover Graphics2D Graphics2D g2 = (Graphics2D) g; //Background Top g2.setColor(Color.BLUE); Rectangle backgroundTop = new Rectangle (0, 0, getWidth(), getHeight() / 4); g2.fill(backgroundTop); // Background bottom g2.setColor(Color.GREEN); Rectangle backgroundBottom = new Rectangle (0, getHeight() / 2, getWidth(), getHeight() / 2); g2.fill(backgroundBottom); // Speaker base g2.setColor(Color.BLACK); Rectangle base = new Rectangle (0, 0, 50, 100); g2.fill(base); // Speakers circles gray top g2.setColor(Color.DARK_GRAY); Ellipse2D.Double speakerTop = new Ellipse2D.Double(10, 10, 30, 30); g2.fill(speakerTop); //speakers circles black top g2.setColor(Color.BLACK); Ellipse2D.Double speakerTop1 = new Ellipse2D.Double(15, 15, 20, 20); g2.fill(speakerTop1); // Speakers circles gray bottom g2.setColor(Color.DARK_GRAY); Ellipse2D.Double speakerBottom = new Ellipse2D.Double(10, 50, 30, 30); g2.fill(speakerBottom); //speakers circles black bottom g2.setColor(Color.BLACK); Ellipse2D.Double speakerBottom1 = new Ellipse2D.Double(15, 55, 20, 20); g2.fill(speakerBottom1); } } My main question is how do I change my Jframe so it can use as many classes as I want, It cant be the size of my classes because they were used with the same 1000, 800 Jframe to make the classes. I also need to be able to add more than just these two classes to my Jframe.

Read the article

Run CGI in IIS 7 to work with GET without Requiring POST Request

- by Mohamed Meligy

I'm trying to migrate an old CGI application from an existing Windows 2003 server (IIS 6.0) where it works just fine to a new Windows 2008 server with IIS 7.0 where we're getting the following problem: After setting up the module handler and everything, I find that I can only access the CGI application (rdbweb.exe) file if I'm calling it via POST request (form submit from another page). If I just try to type in the URL of the file (issuing a GET request) I get the following error: HTTP Error 502.2 - Bad Gateway The specified CGI application misbehaved by not returning a complete set of HTTP headers. The headers it did return are "Exception EInOutError in module rdbweb.exe at 00039B44. I/O error 6. ". This is a very old application for one of our clients. When we tried to call the vendor they said we need to pay ~ $3000 annual support fee in order to start the talk about it. Of course I'm trying to avoid that! Note that: If we create a normal HTML form that submits to "rdbweb.exe", we get the CGI working normally. We can't use this as workaround though because some pages in the application link to "rdbweb.exe" with normal link not form submit. If we run "rdbweb.exe". from a Console (Command Prompt) Window not IIS, we get the normal HTML we'd typically expect, no problem. We have tried the following: Ensuring the CGI module mapped to "rdbweb.exe".in IIS has all permissions (read, write, execute) enabled and also all verbs are allowed not just specific ones, also tried allowing GET, POST explicitely. Ensuring the application bool has "enable 32 bit applications" set to true. Ensuring the website runs with an account that has full permissions on the "rdbweb.exe".file and whole website (although we know it "read", "execute" should be enough). Ensuring the machine wide IIS setting for "ISAPI and CGI Restrictions" has the full path to "rdbweb.exe".allowed. Making sure we have the latest Windows Updates (for IIS6 we found knowledge base articles stating bugs that require hot fixes for IIS6, but nothing similar was found for IIS7). Changing the module from CGI to Fast CGI, not working also Now the only remaining possibility we have instigated is the following Microsoft Knowledge Base article:http://support.microsoft.com/kb/145661 - Which is about: CGI Error: The specified CGI application misbehaved by not returning a complete set of HTTP headers. The headers it did return are: the article suggests the following solution: Modify the source code for the CGI application header output. The following is an example of a correct header: print "HTTP/1.0 200 OK\n"; print "Content-Type: text/html\n\n\n"; Unfortunately we do not have the source to try this out, and I'm not sure anyway whether this is the issue we're having. Can you help me with this problem? Is there a way to make the application work without requiring POST request? Note that on the old IIS6 server the application is working just fine, and I could not find any special IIS configuration that I may want to try its equivalent on IIS7.

Read the article

Building nginx 1.0.4 on Amazon EC2 micro - perl and python problems

- by digitaltoast

I'd like to run nginx as a reverse proxy with apache2 on my EC2 micro instance. yum install nginx gives me nginx-0.8.53-1.2.amzn1.x86_64.rpm The current nginx is 1.0.4 I found and followed this guide: http://kdn2.info/2011/05/install-nginx-on-amazon-ec2/ It works fine up to and including "make". When I get to checkinstall --fstrans=no I get ERROR: ld.so: object '/usr/lib/installwatch.so' from LD_PRELOAD cannot be preloaded: ignored. test -d '/var/log/nginx' || mkdir -p '/var/log/nginx' ERROR: ld.so: object '/usr/lib/installwatch.so' from LD_PRELOAD cannot be preloaded: ignored. make[1]: Leaving directory `/root/src/nginx-1.0.4' ======================== Installation successful ========================== Copying documentation directory... ./ ./CHANGES ./LICENSE ./README cp: cannot stat `//var/tmp/gRWoVgIcdbmjfTjoVGBM/newfiles.tmp': No such file or directory Copying files to the temporary directory...OK Striping ELF binaries and libraries...OK Compressing man pages...OK Building file list...OK Building RPM package... FAILED! *** Failed to build the package ...and the logfile is full of: Building target platforms: x86_64 Building for target x86_64 Processing files: nginx-1.0.4-1.x86_64 error: File not found: /usr/src/rpm/BUILDROOT/nginx-1.0.4-1.x86_64/usr error: File not found: /usr/src/rpm/BUILDROOT/nginx-1.0.4-1.x86_64/usr/doc There IS /usr/src/rpm/BUILDROOT/nginx-1.0.4-1.x86_64/ but no /usr Following further down the page, it says: "If we want to use, for example, PHP 5.2 we can download PHP and Nginx compatible with Amazon Kernel(Xen Kernel) from the CentosALT Repository." So I install the two repositories, but when I yum install http://centos.alt.ru/pub/nginx/1.0/RPMS/x86_64/nginx-stable-1.0.4-1.el5.x86_64.rpm I get Error: Package: nginx-stable-1.0.4-1.el5.x86_64 (/nginx-stable-1.0.4-1.el5.x86_64) Requires: perl(:MODULE_COMPAT_5.8.8) You could try using --skip-broken to work around the problem but that doesn't fix it. When I do yum update, I get --> Finished Dependency Resolution Error: Package: python-distribute-0.6.19-10.1.x86_64 (devel_languages_python) Requires: python < 2.5 Installed: 1:python-2.6-1.19.amzn1.noarch (@amzn-main) python = 1:2.6-1.19.amzn1 Error: Package: python-distribute-0.6.19-10.1.i586 (devel_languages_python) Requires: python < 2.5 Installed: 1:python-2.6-1.19.amzn1.noarch (@amzn-main) python = 1:2.6-1.19.amzn1 I've tried everything - yum clean all and various other suggestions found on other sites. If anyone has any suggestions or a known package of the current 1.04 nginx working on EC2 Micro (Linux ip-10-56-63-85 2.6.35.11-83.9.amzn1.x86_64 #1 SMP Sat Feb 19 23:42:04 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux - which I think is RHEL 5?) then I'd be grateful. Incidentally, does this repolist look right? repo id repo name status CentALT CentALT Packages for Enterprise Linux 5 - x86_64 enabled: 112+157 amzn-main amzn-main-Base enabled: 2,706 amzn-main-debuginfo amzn-main-debuginfo disabled amzn-main-nosrc amzn-main-nosrc disabled amzn-updates amzn-updates-Base enabled: 328 amzn-updates-debuginfo amzn-updates-debuginfo disabled amzn-updates-nosrc amzn-updates-nosrc disabled devel_languages_python Python and Python Modules (SLE_10) enabled: 1,452+768 epel Extra Packages for Enterprise Linux 5 - x86_64 enabled: 5,892+604 epel-debuginfo Extra Packages for Enterprise Linux 5 - x86_64 - Debug disabled epel-source Extra Packages for Enterprise Linux 5 - x86_64 - Source disabled epel-testing Extra Packages for Enterprise Linux 5 - Testing - x86_64 disabled epel-testing-debuginfo Extra Packages for Enterprise Linux 5 - Testing - x86_64 - Debug disabled epel-testing-source Extra Packages for Enterprise Linux 5 - Testing - x86_64 - Source disabled s3tools Tools for managing Amazon S3 - Simple Storage Service (RHEL_6) enabled: 2+1 repolist: 10,492

Read the article

Need help merging 2 AHK scripts

- by Mikey

i have two functioning scripts that i want to merge into a single AHK File. My problem is that when i combine both scripts, the second script doesnt function or causes an error on script 1. Either way, script 2 ist not functioning at all. Here are some facts: Script 1 = a simple menu script where i want to assign hotkeys to. Script 2 = A small launcher script from a user named Tertius in autohotkey forum. Can someone please look at both codes and help me merge this? The INI File for script 2 looks like this: Keywords.ini npff|Firefox|Firefox gm|Gmail|http://gmail.google.com ;;;;;;;;;;;; BEGIN SCRIPT 2 DetectHiddenWindows, On SetWinDelay, -1 SetKeyDelay, -1 SetBatchLines, -1 GoSub Remin SetTimer, Remin, % 1000 * 60 Loop, read, %A_ScriptDir%\keywords.ini { LineNumber = %A_Index% Loop, parse, A_LoopReadLine, | { if (A_Index == 1) abbrevs%LineNumber% := A_LoopField else if (A_Index == 2) tips%LineNumber% := A_LoopField else if (A_Index == 3) programs%LineNumber% := A_LoopField else if (A_Index == 4) params%LineNumber% := A_LoopField } tosay := abbrevs%LineNumber% } cnt = %LineNumber% Loop { Input, Key, L1 V, % "{LControl}{RControl}{LAlt}{RAlt}{LShift}{RShift}{LWin}{RWin}" . "{AppsKey}{F1}{F2}{F3}{F4}{F5}{F6}{F7}{F8}{F9}{F10}{F11}{F12}{Left}{Right}{Up}{Down}" . "{Home}{End}{PgUp}{PgDn}{Del}{Ins}{BS}{Capslock}{Numlock}{PrintScreen}{Pause}{Escape}" If( ( Asc(Key) = 65 && Asc(Key) <= 90 ) || ( Asc(Key) = 97 && Asc(Key) <= 122 ) ) Word .= Key Else { Word := "" Continue } tipup := false Loop %cnt% { if (Word == abbrevs%A_index%) { tip := tips%A_index% ToolTip %tip% tipup := true } else { if (tipup == false) ToolTip } } } $Tab:: Loop %cnt% { if (Word != "" && Word == abbrevs%A_index%) { Word := "" StringLen, len, abbrevs%A_index% Loop %len% Send {Shift Down}{Left} Send {Shift Up}{BS} ToolTip program := programs%A_index% param := params%A_index% run, %program% %param% return } } Word := "" Send {Tab} Return ~LButton:: ~MButton:: ~RButton:: ~XButton1:: ~XButton2:: Word := "" Tooltip Return Remin: WinMinimize, %A_ScriptFullPath% - AutoHotkey v WinHide, %A_ScriptFullPath% - AutoHotkey v Return ;;;;;;;;;; END SCRIPT 2 ;;;;;;;;;;;;;; BEGIN SCRIPT 1 ;This is a working script that creates a popup menu. ; Create the popup menu by adding some items to it. Menu, MyMenu, Add, FIS 201, MenuHandler Menu, MyMenu, Add ; Add a separator line. Menu, MyMenu, Color, Lime, Single ;Define the Menu Color ; Create another menu destined to become a submenu of the above menu. Menu, Submenu1, Add, Item2, MenuHandler Menu, Submenu1, Add, Item3, MenuHandler Menu, Submenu1, Color, Yellow ;Define the Menu Color ; Create another menu destined to become a submenu of the above menu. Menu, Submenu2, Add, Item1a, MenuHandler Menu, Submenu2, Add, Item2a, MenuHandler Menu, Submenu2, Add, Item3a, MenuHandler Menu, Submenu2, Add, Item4a, MenuHandler Menu, Submenu2, Add, Item5a, MenuHandler Menu, Submenu2, Add, Item6a, MenuHandler Menu, Submenu2, Color, Aqua ;Define the Menu Color ; Create a submenu in the first menu (a right-arrow indicator). When the user selects it, the second menu is displayed. Menu, MyMenu, Add, BKRS 119, :Submenu1 Menu, MyMenu, Add ; Add a separator line below the submenu. Menu, MyMenu, Add, BKRS 201, :Submenu2 Menu, MyMenu, Add ; Add a separator line below the submenu. Menu, MyMenu, Add ; Add a separator line below the submenu. Menu, MyMenu, Add, Google Search, Google ; Add another menu item beneath the submenu. return ; End of script's auto-execute section. Capslock & LButton::Menu, MyMenu, Show ; i.e. press the Win-Z hotkey to show the menu. MenuHandler: MsgBox You selected %A_ThisMenuItem% from the menu %A_ThisMenu%. return ;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;; Google Search ;;; FORMAT InputBox, OutputVar [, Title, Prompt, HIDE, Width, Height, X, Y, Font, Timeout, Default] Google: InputBox, SearchTerm, Google Search,,,350, 120 if SearchTerm < "" Run http://www.google.de/search?sclient=psy-ab&hl=de&site=&source=hp&q=%SearchTerm%&btnG=Suche return ; Make Window Transparent Space::WinSet, Transparent, 125, A ^!Space UP::WinSet, Transparent, OFF, A return ;;;;;;;;;;; END SCRIPT 1 Help is appreciated. Kind Regards, Mikey

Read the article

Extract tar with multiple tars inside?

- by Andrew Fashion

Is there a way to untar a file with multiple tars inside? It's suppose to just untar everything inside including untarring the tars inside the tar... With windows it does it, quite annoying I can't figure it out on linux... Here is what I am doing: # tar -xvf socialengine4.0.5p1.tar core-base-4.0.5.tar core-install-4.0.7.tar external-autocompleter-4.0.0.tar external-calendar-4.0.1.tar external-chootools-4.0.3.tar external-fancyupload-4.0.1.tar external-firebug-4.0.0.tar external-flowplayer-4.0.0.tar external-moocomet-4.0.0.tar external-moocrop-4.0.0.tar external-moolasso-4.0.0.tar external-mootools-4.0.2.tar external-mootree-4.0.0.tar external-open-flash-chart-4.0.0.tar external-smoothbox-4.0.0.tar external-swfobject-4.0.0.tar external-tagger-4.0.2.tar external-tinymce-4.0.2.tar library-engine-4.0.5.tar library-facebook-4.0.0.tar library-ofc-4.0.0.tar library-pear-4.0.1.tar library-scaffold-4.0.3.tar module-activity-4.0.5p1.tar module-announcement-4.0.3.tar module-authorization-4.0.5.tar module-core-4.0.5.tar module-fields-4.0.5p1.tar module-invite-4.0.3.tar module-messages-4.0.5.tar module-network-4.0.5p1.tar module-storage-4.0.4.tar module-user-4.0.5.tar widget-rss-4.0.2.tar widget-weather-4.0.0.tar changelog.html [root@D18634 se4]# ls -l total 36980 -rw-r--r-- 1 1000 1000 27188 Oct 8 15:39 changelog.html -rw-r--r-- 1 1000 1000 359424 Oct 8 16:13 core-base-4.0.5.tar -rw-r--r-- 1 1000 1000 1122304 Oct 8 16:13 core-install-4.0.7.tar -rw-r--r-- 1 1000 1000 38400 Oct 8 16:13 external-autocompleter-4.0.0.tar -rw-r--r-- 1 1000 1000 100352 Oct 8 16:13 external-calendar-4.0.1.tar -rw-r--r-- 1 1000 1000 31232 Oct 8 16:13 external-chootools-4.0.3.tar -rw-r--r-- 1 1000 1000 66560 Oct 8 16:13 external-fancyupload-4.0.1.tar -rw-r--r-- 1 1000 1000 85504 Oct 8 16:13 external-firebug-4.0.0.tar -rw-r--r-- 1 1000 1000 216576 Oct 8 16:13 external-flowplayer-4.0.0.tar -rw-r--r-- 1 1000 1000 11776 Oct 8 16:13 external-moocomet-4.0.0.tar -rw-r--r-- 1 1000 1000 16384 Oct 8 16:13 external-moocrop-4.0.0.tar -rw-r--r-- 1 1000 1000 27648 Oct 8 16:13 external-moolasso-4.0.0.tar -rw-r--r-- 1 1000 1000 1445376 Oct 8 16:13 external-mootools-4.0.2.tar -rw-r--r-- 1 1000 1000 45568 Oct 8 16:13 external-mootree-4.0.0.tar -rw-r--r-- 1 1000 1000 330240 Oct 8 16:13 external-open-flash-chart-4.0.0.tar -rw-r--r-- 1 1000 1000 43008 Oct 8 16:13 external-smoothbox-4.0.0.tar -rw-r--r-- 1 1000 1000 18432 Oct 8 16:13 external-swfobject-4.0.0.tar -rw-r--r-- 1 1000 1000 19968 Oct 8 16:13 external-tagger-4.0.2.tar -rw-r--r-- 1 1000 1000 5711360 Oct 8 16:13 external-tinymce-4.0.2.tar -rw-r--r-- 1 1000 1000 1230848 Oct 8 16:13 library-engine-4.0.5.tar -rw-r--r-- 1 1000 1000 28672 Oct 8 16:13 library-facebook-4.0.0.tar -rw-r--r-- 1 1000 1000 125952 Oct 8 16:13 library-ofc-4.0.0.tar -rw-r--r-- 1 1000 1000 1715200 Oct 8 16:13 library-pear-4.0.1.tar -rw-r--r-- 1 1000 1000 340480 Oct 8 16:13 library-scaffold-4.0.3.tar -rw-r--r-- 1 1000 1000 354304 Oct 8 16:13 module-activity-4.0.5p1.tar -rw-r--r-- 1 root root 327680 Jan 8 02:37 module-albums-4.0.5.tar -rw-r--r-- 1 1000 1000 80896 Oct 8 16:13 module-announcement-4.0.3.tar -rw-r--r-- 1 1000 1000 147456 Oct 8 16:13 module-authorization-4.0.5.tar -rw-r--r-- 1 1000 1000 2643968 Oct 8 16:13 module-core-4.0.5.tar -rw-r--r-- 1 root root 665600 Jan 8 02:37 module-events-4.0.5.tar -rw-r--r-- 1 1000 1000 377344 Oct 8 16:13 module-fields-4.0.5p1.tar -rw-r--r-- 1 root root 501760 Jan 8 02:37 module-forum-4.0.5p1.tar -rw-r--r-- 1 1000 1000 81408 Oct 8 16:14 module-invite-4.0.3.tar -rw-r--r-- 1 1000 1000 147968 Oct 8 16:14 module-messages-4.0.5.tar -rw-r--r-- 1 1000 1000 111616 Oct 8 16:14 module-network-4.0.5p1.tar -rw-r--r-- 1 1000 1000 99840 Oct 8 16:14 module-storage-4.0.4.tar -rw-r--r-- 1 1000 1000 844288 Oct 8 16:14 module-user-4.0.5.tar -rw-r--r-- 1 root root 18094080 Jan 8 02:40 socialengine4.0.5p1.tar -rw-r--r-- 1 1000 1000 12288 Oct 8 16:14 widget-rss-4.0.2.tar -rw-r--r-- 1 1000 1000 13824 Oct 8 16:14 widget-weather-4.0.0.tar

Read the article

iptables DNS resolution

- by Favolas

I have a virtual machine with Fedora 19 acting as a router. This machine as an interface (p8p1) with the IP 172.16.1.254 that is connected to another machine (IP 172.16.1.1) that's simulating the external network. I've installed snort 2.9.2.2, applied the snortsam-2.9.2.2.diff.gz patch and installed snortsam 2.70 on the routermachine In snort.conf besides altering some RULE_PATH I believe I've only added the following line to the file. output alert_fwsam: 127.0.0.1:898/password After doing this two comands: ifconfig p8p1 promisc /usr/local/snort/bin/snort -v -i p8p1 If I ping from the external network to the router IP, I can see the info about the pings. One of the rules that I have is icmp-info.rules that as this single line: alert icmp $EXTERNAL_NET any -> $HOME_NET any (msg:"ICMP-INFO Echo Reply"; icode:0; itype:0; classtype:misc-activity; sid:408; rev:6;fwsam: src, 5 minutes;) snortsam.conf as this data: defaultkey password accept localhost keyinterval 30 minutes dontblock 192.168.1.1 # rede local rollbackhosts 50 rollbackthreshold 20 / 30 secs rollbacksleeptime 1 minute logfile /var/log/snort/snortsam.log loglevel 3 daemon nothreads # linha importante para gerar os bloqueios via iptables iptables p8p1 LOG bindip 127.0.0.1 Now I run this command: /usr/local/snort/bin/snort -u snort -i p8p1 -c /etc/snort/snort.conf -l /var/log/snort -Dq Terminal gives this message: Spawning daemon child... My daemon child 2080 lives... Daemon parent exiting (0) and when I runsnortsam in terminal i got this: SnortSam, v 2.70. Copyright (c) 2001-2009 Frank Knobbe . All rights reserved. Plugin 'fwsam': v 2.5, by Frank Knobbe Plugin 'fwexec': v 2.7, by Frank Knobbe Plugin 'pix': v 2.9, by Frank Knobbe Plugin 'ciscoacl': v 2.12, by Ali Basel <[email protected]> Plugin 'cisconullroute': v 2.5, by Frank Knobbe Plugin 'cisconullroute2': v 2.2, by Wouter de Jong <[email protected]> Plugin 'netscreen': v 2.10, by Frank Knobbe Plugin 'ipchains': v 2.8, by Hector A. Paterno <[email protected]> Plugin 'iptables': v 2.9, by Fabrizio Tivano <[email protected]>, Luis Marichal <[email protected]> Plugin 'ebtables': v 2.4, by Bruno Scatolin <[email protected]> Plugin 'watchguard': v 2.7, by Thomas Maier <[email protected]> Plugin 'email': v 2.12, by Frank Knobbe Plugin 'email-blocks-only': v 2.12, by Frank Knobbe Plugin 'snmpinterfacedown': v 2.3, by Ali BASEL <[email protected]> Plugin 'forward': v 2.8, by Frank Knobbe Parsing config file /etc/snortsam.conf... Linking plugin 'iptables'... Checking for existing state file "/var/db/snortsam.state". Found. Reading state file. Starting to listen for Snort alerts. and snortsam.log as an entry like this 2013/10/25, 10:15:17, -, 1, snortsam, Starting to listen for Snort alerts. Now, from the external machine I do ping 172.16.1.254 and it starts showing the info and an alert file is created in /var/log/snort/ that as the info about the PINGS. Something like: [**] [1:408:6] ICMP-INFO Echo Reply [**] [Classification: Misc activity] [Priority: 3] 10/25-10:35:16.061319 172.16.1.254 -> 172.16.1.1 ICMP TTL:64 TOS:0x0 ID:38720 IpLen:20 DgmLen:84 Type:0 Code:0 ID:1389 Seq:1 ECHO REPLY Also, if I run instead /usr/local/snort/bin/snort snort -v -i p8p1 i got this message: Running in packet dump mode --== Initializing Snort ==-- Initializing Output Plugins! Snort BPF option: snort pcap DAQ configured to passive. The DAQ version does not support reload. Acquiring network traffic from "p8p1". ERROR: Can't set DAQ BPF filter to 'snort' (pcap_daq_set_filter: pcap_compile: syntax error)! Fatal Error, Quitting.. So, this are my questions: Shouldn't snortsam block the PING? Is that DAQ error causing the problem? If so, How can I solve it?

Read the article

Is it possible to repair a Cisco 3500 XL (3548) switch with POST Error messages?

- by Alex

I've got an old Cisco 3500 XL, and it seems to have hardware issues. I've loaded the latest IOS and cleared all config. Does anyone have any experience fixing the switch core? I'm a reasonably competent SMD solderer, can I replace/reflow some chips? I've checked the power supply voltages and it's all within tolerance, and no visible signs of any component damage. Some chips are hot to the touch. I understand that these were EOL as of 2007, but should have a lifetime warranty for the electronics. I don't have a Cisco support contract, so I can't file a ticket. What should I do? Console output: switch: dir flash: Directory of flash:/ 2 -rwx 1811584 <date> c3500xl-c3h2s-mz.120-5.WC17.bin 1799680 bytes available (1812992 bytes used) switch: boot Loading "flash:c3500xl-c3h2s-mz.120-5.WC17.bin"...################################################################################################################################################################################### File "flash:c3500xl-c3h2s-mz.120-5.WC17.bin" uncompressed and installed, entry point: 0x3000 executing... Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco Internetwork Operating System Software IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5)WC17, RELEASE SOFTWARE (fc1) Copyright (c) 1986-2007 by cisco Systems, Inc. Compiled Tue 13-Feb-07 15:04 by antonino Image text-base: 0x00003000, data-base: 0x00352924 Initializing C3500XL flash... flashfs[1]: 1 files, 1 directories flashfs[1]: 0 orphaned files, 0 orphaned directories flashfs[1]: Total bytes: 3612672 flashfs[1]: Bytes used: 1812992 flashfs[1]: Bytes available: 1799680 flashfs[1]: flashfs fsck took 3 seconds. flashfs[1]: Initialization complete. ...done Initializing C3500XL flash. C3500XL POST: System Board Test: Passed C3500XL POST: Daughter Card Test: Passed C3500XL POST: CPU Buffer Test: Passed C3500XL POST: CPU Notify RAM Test: Passed C3500XL POST: CPU Interface Test: Passed C3500XL POST: Testing Switch Core: Passed Error with Switch Core BIST test Phase 0. Returns: Test Complete Low : 0x0FFFFFFF, Test Complete High : 0xFFFFFFFE Test Phase Low : 0x00000040, Test Phase High : 0x00000000 Test Phase Third : 0x00000000, Test Complete Third : 0x000001F8 C3500XL POST FAILURE: Testing Switch Core: Failed C3500XL POST FAILURE: Testing Buffer Table: Failed C3500XL POST FAILURE: Data Buffer Test: Failed C3500XL POST FAILURE: Configuring Switch Parameters: Failed C3500XL POST FAILURE: Switch Core BIST failed. C3500XL POST FAILURE: Cannot test Modules due to failure of Switch Core POST Del Mar Failure (0th Del Mar): req system failed to init C3500XL POST FAILURE: C3500XL POST FAILURE: ATM: required system failed to init C3500XL POST: Ethernet Controller Test: Passed C3500XL POST FAILURE: MII Test: Failed C3500XL POST FAILURE: Error waiting for Ethernet Controller and SW_PARAMS C3500XL POST FAILURE: Initialization/POST failed C3500XL POST FAILURE: AT: Failing because system POST failed Exception (8192)! Debug Exception (Could be NULL pointer dereference) CPU Register Context: Vector = 0x00002000 PC = 0x000F36F4 MSR = 0x00029200 CR = 0x22000024 LR = 0x000F6964 CTR = 0x001DE46C XER = 0x00000000 R0 = 0x00000000 R1 = 0x004E2580 R2 = 0x00000000 R3 = 0x00000000 R4 = 0x00000001 R5 = 0x00000000 R6 = 0x004E2718 R7 = 0x004E2718 R8 = 0x00000008 R9 = 0x00000000 R10 = 0x0000FFFF R11 = 0x00480000 R12 = 0x42000024 R13 = 0x00000000 R14 = 0x00000000 R15 = 0x00000000 R16 = 0x00000000 R17 = 0x00000000 R18 = 0x00000000 R19 = 0x00000000 R20 = 0x00000000 R21 = 0x00000000 R22 = 0x00000000 R23 = 0x00000000 R24 = 0x00000000 R25 = 0x00000020 R26 = 0x004E2718 R27 = 0x004E2718 R28 = 0x00000020 R29 = 0x00002513 R30 = 0x00000001 R31 = 0x00000000 Stack trace: PC = 0x000F36F4, SP = 0x004E2580 Frame 00: SP = 0x004E25A0 PC = 0x40000016 Frame 01: SP = 0x004E2618 PC = 0x000F6964 Frame 02: SP = 0x004E26A8 PC = 0x000F76DC Frame 03: SP = 0x004E26C8 PC = 0x000E8114 Frame 04: SP = 0x004E26F0 PC = 0x001F5BF8 Frame 05: SP = 0x004E2710 PC = 0x001F5CF4 Frame 06: SP = 0x004E2748 PC = 0x0023F4DC Frame 07: SP = 0x004E2750 PC = 0x0023E650 Frame 08: SP = 0x004E27C8 PC = 0x0023E89C Frame 09: SP = 0x004E27E0 PC = 0x0028AF34 Frame 10: SP = 0x004E27E8 PC = 0x001E38F8 Frame 11: SP = 0x004E2808 PC = 0x001E39A8 Frame 12: SP = 0x004E2820 PC = 0x0014E220 Frame 13: SP = 0x004E28C8 PC = 0x0014E39C Frame 14: SP = 0x00000000 PC = 0x001EB510

Read the article

Have to dhclient each restart to access internet

- by Zeophlite

So each time I restart my ubuntu server (virtual 10.04, via Xencenter), I have to call dhclient before I can access the internet: http://img813.imageshack.us/i/dhclient.png/ What do I need to change to get internet access automatically? Apologies for posting images, I'm using Xencenter, so I can't copy/paste the console output EDIT:: daniel@workwork:~$ cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.69.136 netmask 255.255.255.0 network 192.168.69.0 broadcast 192.168.69.255 gateway 192.168.69.1 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 192.168.69.120 dns-search workwork.com.au daniel@workwork:~$ ifconfig eth0 Link encap:Ethernet HWaddr ae:11:14:22:0a:03 inet6 addr: fe80::ac11:14ff:fe22:a03/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:32 errors:0 dropped:0 overruns:0 frame:0 TX packets:85 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:10496 (10.4 KB) TX bytes:13086 (13.0 KB) Interrupt:32 Base address:0x6000 eth1 Link encap:Ethernet HWaddr b2:2c:40:f2:a0:fa inet addr:192.168.69.167 Bcast:192.168.69.255 Mask:255.255.255.0 inet6 addr: fe80::b02c:40ff:fef2:a0fa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13448 errors:0 dropped:0 overruns:0 frame:0 TX packets:3100 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7679428 (7.6 MB) TX bytes:282286 (282.2 KB) Interrupt:36 Base address:0xa100 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:179 errors:0 dropped:0 overruns:0 frame:0 TX packets:179 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:36905 (36.9 KB) TX bytes:36905 (36.9 KB) daniel@workwork:/var/lib/dhcp3$ cat dhclient.leases lease { interface "eth1"; fixed-address 192.168.69.167; filename "boot\\x86\\wdsnbp.com"; option subnet-mask 255.255.255.0; option routers 192.168.69.1; option dhcp-lease-time 28800; option dhcp-message-type 5; option domain-name-servers 192.168.69.120,192.168.69.121; option dhcp-server-identifier 192.168.69.120; option dhcp-renewal-time 14400; option dhcp-rebinding-time 25200; option domain-name "workwork.com.au"; renew 5 2011/03/18 07:36:53; rebind 5 2011/03/18 11:35:39; expire 5 2011/03/18 12:35:39; } lease { interface "eth1"; fixed-address 192.168.69.167; filename "boot\\x86\\wdsnbp.com"; option subnet-mask 255.255.255.0; option routers 192.168.69.1; option dhcp-lease-time 28800; option dhcp-message-type 5; option domain-name-servers 192.168.69.120,192.168.69.121; option dhcp-server-identifier 192.168.69.120; option dhcp-renewal-time 14400; option dhcp-rebinding-time 25200; option domain-name "workwork.com.au"; renew 5 2011/03/18 08:51:58; rebind 5 2011/03/18 12:24:16; expire 5 2011/03/18 13:24:16; } daniel@workwork:/var/lib/dhcp3$ cat dhclient.eth0.leases daniel@workwork:/var/lib/dhcp3$ ifconfig eth1 before and after dhclient http://img692.imageshack.us/i/prepost.png/

Read the article

conflict in debian packages

- by Alaa Alomari

I have Debian 4 server (i know it is very old) cat /etc/issue Debian GNU/Linux 4.0 \n \l I have the following in /etc/apt/sources.list deb http://debian.uchicago.edu/debian/ stable main deb http://ftp.debian.org/debian/ stable main deb-src http://ftp.debian.org/debian/ stable main deb http://security.debian.org/ stable/updates main apt-get upgrade Reading package lists... Done Building dependency tree... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies. libt1-5: Depends: libc6 (= 2.7) but 2.3.6.ds1-13etch10+b1 is installed locales: Depends: glibc-2.11-1 but it is not installable E: Unmet dependencies. Try using -f. Now it shows that i have Debian 6!! cat /etc/issue Debian GNU/Linux 6.0 \n \l EDIT I have tried apt-get update Get: 1 http://debian.uchicago.edu stable Release.gpg [1672B] Hit http://debian.uchicago.edu stable Release Ign http://debian.uchicago.edu stable/main Packages/DiffIndex Hit http://debian.uchicago.edu stable/main Packages Get: 2 http://security.debian.org stable/updates Release.gpg [836B] Hit http://security.debian.org stable/updates Release Get: 3 http://ftp.debian.org stable Release.gpg [1672B] Ign http://security.debian.org stable/updates/main Packages/DiffIndex Hit http://security.debian.org stable/updates/main Packages Hit http://ftp.debian.org stable Release Ign http://ftp.debian.org stable/main Packages/DiffIndex Ign http://ftp.debian.org stable/main Sources/DiffIndex Hit http://ftp.debian.org stable/main Packages Hit http://ftp.debian.org stable/main Sources Fetched 3B in 0s (3B/s) Reading package lists... Done apt-get dist-upgrade Reading package lists... Done Building dependency tree... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies. libt1-5: Depends: libc6 (= 2.7) but 2.3.6.ds1-13etch10+b1 is installed locales: Depends: glibc-2.11-1 E: Unmet dependencies. Try using -f. apt-get -f install Reading package lists... Done Building dependency tree... Done Correcting dependencies...Done The following extra packages will be installed: gcc-4.4-base libbsd-dev libbsd0 libc-bin libc-dev-bin libc6 Suggested packages: glibc-doc Recommended packages: libc6-i686 The following packages will be REMOVED libc6-dev libedit-dev libexpat1-dev libgcrypt11-dev libjpeg62-dev libmcal0-dev libmhash-dev libncurses5-dev libpam0g-dev libsablot0-dev libtool libttf-dev The following NEW packages will be installed gcc-4.4-base libbsd-dev libbsd0 libc-bin libc-dev-bin The following packages will be upgraded: libc6 1 upgraded, 5 newly installed, 12 to remove and 349 not upgraded. 7 not fully installed or removed. Need to get 0B/5050kB of archives. After unpacking 23.1MB disk space will be freed. Do you want to continue [Y/n]? y Preconfiguring packages ... dpkg: regarding .../libc-bin_2.11.3-2_i386.deb containing libc-bin: package uses Breaks; not supported in this dpkg dpkg: error processing /var/cache/apt/archives/libc-bin_2.11.3-2_i386.deb (--unpack): unsupported dependency problem - not installing libc-bin Errors were encountered while processing: /var/cache/apt/archives/libc-bin_2.11.3-2_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Now: it seems there is a conflict!! how can i fix it? and is it true that the server has became debian 6!!?? Thanks for your help

Read the article

OSError : [Errno 38] Function not implemented - Django Celery implementation

- by Jordan Messina

I installed django-celery and I tried to start up the worker server but I get an OSError that a function isn't implemented. I'm running CentOS release 5.4 (Final) on a VPS: . broker -> amqp://guest@localhost:5672/ . queues -> . celery -> exchange:celery (direct) binding:celery . concurrency -> 4 . loader -> djcelery.loaders.DjangoLoader . logfile -> [stderr]@WARNING . events -> OFF . beat -> OFF [2010-07-22 17:10:01,364: WARNING/MainProcess] Traceback (most recent call last): [2010-07-22 17:10:01,364: WARNING/MainProcess] File "manage.py", line 11, in <module> [2010-07-22 17:10:01,364: WARNING/MainProcess] execute_manager(settings) [2010-07-22 17:10:01,364: WARNING/MainProcess] File "/usr/local/lib/python2.6/site-packages/django/core/management/__init__.py", line 438, in execute_manager [2010-07-22 17:10:01,364: WARNING/MainProcess] utility.execute() [2010-07-22 17:10:01,364: WARNING/MainProcess] File "/usr/local/lib/python2.6/site-packages/django/core/management/__init__.py", line 379, in execute [2010-07-22 17:10:01,365: WARNING/MainProcess] self.fetch_command(subcommand).run_from_argv(self.argv) [2010-07-22 17:10:01,365: WARNING/MainProcess] File "/usr/local/lib/python2.6/site-packages/django/core/management/base.py", line 191, in run_from_argv [2010-07-22 17:10:01,365: WARNING/MainProcess] self.execute(*args, **options.__dict__) [2010-07-22 17:10:01,365: WARNING/MainProcess] File "/usr/local/lib/python2.6/site-packages/django/core/management/base.py", line 218, in execute [2010-07-22 17:10:01,365: WARNING/MainProcess] output = self.handle(*args, **options) [2010-07-22 17:10:01,365: WARNING/MainProcess] File "/usr/local/lib/python2.6/site-packages/django_celery-2.0.0-py2.6.egg/djcelery/management/commands/celeryd.py", line 22, in handle [2010-07-22 17:10:01,366: WARNING/MainProcess] run_worker(**options) [2010-07-22 17:10:01,366: WARNING/MainProcess] File "/usr/local/lib/python2.6/site-packages/celery-2.0.1-py2.6.egg/celery/bin/celeryd.py", line 385, in run_worker [2010-07-22 17:10:01,366: WARNING/MainProcess] return Worker(**options).run() [2010-07-22 17:10:01,366: WARNING/MainProcess] File "/usr/local/lib/python2.6/site-packages/celery-2.0.1-py2.6.egg/celery/bin/celeryd.py", line 218, in run [2010-07-22 17:10:01,366: WARNING/MainProcess] self.run_worker() [2010-07-22 17:10:01,366: WARNING/MainProcess] File "/usr/local/lib/python2.6/site-packages/celery-2.0.1-py2.6.egg/celery/bin/celeryd.py", line 312, in run_worker [2010-07-22 17:10:01,367: WARNING/MainProcess] worker.start() [2010-07-22 17:10:01,367: WARNING/MainProcess] File "/usr/local/lib/python2.6/site-packages/celery-2.0.1-py2.6.egg/celery/worker/__init__.py", line 206, in start [2010-07-22 17:10:01,367: WARNING/MainProcess] component.start() [2010-07-22 17:10:01,367: WARNING/MainProcess] File "/usr/local/lib/python2.6/site-packages/celery-2.0.1-py2.6.egg/celery/concurrency/processes/__init__.py", line 54, in start [2010-07-22 17:10:01,367: WARNING/MainProcess] maxtasksperchild=self.maxtasksperchild) [2010-07-22 17:10:01,367: WARNING/MainProcess] File "/usr/local/lib/python2.6/site-packages/celery-2.0.1-py2.6.egg/celery/concurrency/processes/pool.py", line 448, in __init__ [2010-07-22 17:10:01,368: WARNING/MainProcess] self._setup_queues() [2010-07-22 17:10:01,368: WARNING/MainProcess] File "/usr/local/lib/python2.6/site-packages/celery-2.0.1-py2.6.egg/celery/concurrency/processes/pool.py", line 564, in _setup_queues [2010-07-22 17:10:01,368: WARNING/MainProcess] self._inqueue = SimpleQueue() [2010-07-22 17:10:01,368: WARNING/MainProcess] File "/usr/local/lib/python2.6/multiprocessing/queues.py", line 315, in __init__ [2010-07-22 17:10:01,368: WARNING/MainProcess] self._rlock = Lock() [2010-07-22 17:10:01,368: WARNING/MainProcess] File "/usr/local/lib/python2.6/multiprocessing/synchronize.py", line 117, in __init__ [2010-07-22 17:10:01,369: WARNING/MainProcess] SemLock.__init__(self, SEMAPHORE, 1, 1) [2010-07-22 17:10:01,369: WARNING/MainProcess] File "/usr/local/lib/python2.6/multiprocessing/synchronize.py", line 49, in __init__ [2010-07-22 17:10:01,369: WARNING/MainProcess] sl = self._semlock = _multiprocessing.SemLock(kind, value, maxvalue) [2010-07-22 17:10:01,369: WARNING/MainProcess] OSError [2010-07-22 17:10:01,369: WARNING/MainProcess] : [2010-07-22 17:10:01,369: WARNING/MainProcess] [Errno 38] Function not implemented Am I just totally screwed and should use a new kernel that has this implemented or is there an easy way to resolve this?

Read the article

vconfig created virtual interface and trunking - is the the interface untagged or tagged for that VLAN ID?

- by kce

I am trying to setup an additional VLAN on our Debian-based router/firewall (which exists as a virtual machine on Hyper-V), our core switch (an HP Procurve 5406) and a remote HP ProCurve 2610 that is connected via a WAN Transparent Lan Service (TLS) link. Let's work backwards from the network edge: The Debian server has an external connection attached to eth0. The internal interface is eth1, which is connected directly from our Hyper-V host to the 5406. The port that eth1 is attached to is setup as Trk12. The 2610 is attached to Trk9 (which trunks a whole slew of VLANs - Trk9 is our TLS head). I can successfully ping the management IP addresses for my VLAN from both switches but I cannot ping, from either switch, the virtual interface for my new VLAN on the Debian-base router and firewall. The existing VLAN works fine. What gives? The port eth1 is attached to is a trunk, the existing VLAN (ID 98) is untagged on the trunk, the new VLAN (ID 198) is tagged. VLAN 198 is tagged on Trk9 on the 5406 and on the 2610. I can ping the other switch's management IP (10.100.198.2 and 10.100.198.3) from the other respective switch. That leg of the VLAN works - however I cannot communicate with eth1.198's 10.100.198.1. I feel like I'm missing something elementary but what it is remains illusive to me. I suspect the issue is with the vconfig created eth1.198. It should pass the tagged VLAN 198 packets correct? But they cannot seem to get any further than the 5406. Communication on the existing VLAN 98 works fine. From the Debian box: eth1: eth1 Link encap:Ethernet HWaddr 00:15:5d:34:5e:03 inet addr:10.100.0.1 Bcast:10.100.255.255 Mask:255.255.0.0 inet6 addr: fe80::215:5dff:fe34:5e03/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12179786 errors:0 dropped:0 overruns:0 frame:0 TX packets:20210532 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1586498028 (1.4 GiB) TX bytes:26154226278 (24.3 GiB) Interrupt:9 Base address:0xec00 eth1.198: eth1.198 Link encap:Ethernet HWaddr 00:15:5d:34:5e:03 inet addr:10.100.198.1 Bcast:10.100.198.255 Mask:255.255.255.0 inet6 addr: fe80::215:5dff:fe34:5e03/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1496 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:72 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:3528 (3.4 KiB) # cat /proc/net/vlan/eth1.198: eth1.198 VID: 198 REORDER_HDR: 0 dev->priv_flags: 1 total frames received 0 total bytes received 0 Broadcast/Multicast Rcvd 0 total frames transmitted 72 total bytes transmitted 3528 total headroom inc 0 total encap on xmit 39 Device: eth1 INGRESS priority mappings: 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 EGRESS priority mappings: # ip route 10.100.198.0/24 dev eth1.198 proto kernel scope link src 10.100.198.1 206.174.64.0/20 dev eth0 proto kernel scope link src 206.174.66.14 10.100.0.0/16 dev eth1 proto kernel scope link src 10.100.0.1 default via 206.174.64.1 dev eth0 # iptables -L -v Chain INPUT (policy DROP 6875 packets, 637K bytes) pkts bytes target prot opt in out source destination 41 4320 ACCEPT all -- lo any anywhere anywhere 11481 1560K ACCEPT all -- any any anywhere anywhere state RELATED,ESTABLISHED 107 8058 ACCEPT icmp -- any any anywhere anywhere 0 0 ACCEPT tcp -- eth1 any 10.100.0.0/24 anywhere tcp dpt:ssh 701 317K ACCEPT udp -- eth1 any anywhere anywhere udp dpts:bootps:bootpc Chain FORWARD (policy DROP 1 packets, 40 bytes) pkts bytes target prot opt in out source destination 156K 25M ACCEPT all -- eth1 any anywhere anywhere 215K 248M ACCEPT all -- eth0 eth1 anywhere anywhere state RELATED,ESTABLISHED 0 0 ACCEPT all -- eth1.198 any anywhere anywhere 0 0 ACCEPT all -- eth0 eth1.198 anywhere anywhere state RELATED,ESTABLISHED Chain OUTPUT (policy ACCEPT 13048 packets, 1640K bytes) pkts bytes target prot opt in out source destination From the 5406: # show vlan ports trk12 detail Status and Counters - VLAN Information - for ports Trk12 VLAN ID Name | Status Voice Jumbo Mode ------- -------------------- + ---------- ----- ----- -------- 98 WIFI | Port-based No No Untagged 198 VLAN198 | Port-based No No Tagged

Read the article

Problem installing build-essential and upgrading g++ on Ubuntu 8.04

- by ehsanul

I'm having some trouble with dependencies it seems, but myself don't really know how to resolve the issue. Here's the output: ~:) sudo apt-get install build-essential Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. Since you only requested a single operation it is extremely likely that the package is simply not installable and a bug report against that package should be filed. The following information may help to resolve the situation: The following packages have unmet dependencies: build-essential: Depends: g++ (>= 4:4.3.1) but 4:4.2.3-1ubuntu6 is to be installed E: Broken packages ~:) sudo apt-get install g++ Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. Since you only requested a single operation it is extremely likely that the package is simply not installable and a bug report against that package should be filed. The following information may help to resolve the situation: The following packages have unmet dependencies: g++: Depends: cpp (>= 4:4.3.1-1ubuntu2) but 4:4.2.3-1ubuntu6 is to be installed Depends: gcc (>= 4:4.3.1-1ubuntu2) but 4:4.2.3-1ubuntu6 is to be installed Depends: g++-4.3 (>= 4.3.1-1) but it is not going to be installed Depends: gcc-4.3 (>= 4.3.1-1) but it is not installable E: Broken packages ~:) Edit: I just tried aptitude instead of apt-get, as suggested. Doesn't work, had other problems: ~:) sudo aptitude install build-essential [sudo] password for ehsanul: Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done Building tag database... Done The following packages are BROKEN: g++ g++-4.3 libstdc++6-4.3-dev The following packages have been automatically kept back: dpkg-dev fakeroot libdns35 libisc35 linux-libc-dev patch The following NEW packages will be automatically installed: libgmp3c2 libmpfr1ldbl The following packages have been kept back: adobe-flashplugin bind9-host dnsutils gvfs gvfs-backends gvfs-fuse libatm1 libbind9-30 libgvfscommon0 libisccc30 libisccfg30 liblwres30 libnautilus-extension1 linux-headers-2.6.24-24 linux-headers-2.6.24-24-generic linux-image-2.6.24-24-generic nautilus nautilus-data The following NEW packages will be installed: libgmp3c2 libmpfr1ldbl The following packages will be upgraded: build-essential The following partially installed packages will be configured: timidity 2 packages upgraded, 4 newly installed, 0 to remove and 24 not upgraded. Need to get 775kB/6265kB of archives. After unpacking 20.3MB will be used. The following packages have unmet dependencies: libstdc++6-4.3-dev: Depends: gcc-4.3-base (= 4.3.2-1ubuntu11) which is a virtual package. Depends: libstdc++6 (>= 4.3.2-1ubuntu11) but 4.2.4-1ubuntu4 is installed. g++-4.3: Depends: gcc-4.3-base (= 4.3.2-1ubuntu11) which is a virtual package. Depends: gcc-4.3 (= 4.3.2-1ubuntu11) which is a virtual package. Depends: libc6 (>= 2.8~20080505) but 2.7-10ubuntu4 is installed. g++: Depends: cpp (>= 4:4.3.1-1ubuntu2) but 4:4.2.3-1ubuntu6 is installed. Depends: gcc (>= 4:4.3.1-1ubuntu2) but 4:4.2.3-1ubuntu6 is installed. Depends: gcc-4.3 (>= 4.3.1-1) which is a virtual package. Resolving dependencies... The following actions will resolve these dependencies: Keep the following packages at their current version: build-essential [11.3ubuntu1 (hardy, now)] g++ [4:4.2.3-1ubuntu6 (hardy-updates, now)] g++-4.3 [Not Installed] libstdc++6-4.3-dev [Not Installed] Score is -9852 Accept this solution? [Y/n/q/?]

Read the article

Consume WCF Service InProcess using Agatha and WCF

- by REA_ANDREW

I have been looking into this lately for a specific reason. Some integration tests I want to write I want to control the types of instances which are used inside the service layer but I want that control from the test class instance. One of the problems with just referencing the service is that a lot of the time this will by default be done inside a different process. I am using StructureMap as my DI of choice and one of the tools which I am using inline with RhinoMocks is StructureMap.AutoMocking. With StructureMap the main entry point is the ObjectFactory. This will be process specific so if I decide that the I want a certain instance of a type to be used inside the ServiceLayer I cannot configure the ObjectFactory from my test class as that will only apply to the process which it belongs to. This is were I started thinking about two things: Running a WCF in process Being able to share mocked instances across processes A colleague in work pointed me to a project which is for the latter but I thought that it would be a better solution if I could run the WCF Service in process. One of the projects which I use when I think about WCF Services is AGATHA, and the one which I have to used to try and get my head around doing this. Another asset I have is a book called Programming WCF Services by Juval Lowy and if you have not heard of it or read it I would definately recommend it. One of the many topics that is inside this book is the type of configuration you need to communicate with a service in the same process, and it turns out to be quite simple from a config point of view. <system.serviceModel> <services> <service name="Agatha.ServiceLayer.WCF.WcfRequestProcessor"> <endpoint address ="net.pipe://localhost/MyPipe" binding="netNamedPipeBinding" contract="Agatha.Common.WCF.IWcfRequestProcessor"/> </service> </services> <client> <endpoint name="MyEndpoint" address="net.pipe://localhost/MyPipe" binding="netNamedPipeBinding" contract="Agatha.Common.WCF.IWcfRequestProcessor"/> </client> </system.serviceModel> You can see here that I am referencing the Agatha object and contract here, but also that my binding and the address is something called Named Pipes. THis is sort of the “Magic” which makes it happen in the same process. Next I need to open the service prior to calling the methods on a proxy which I also need. My initial attempt at the proxy did not use any Agatha specific coding and one of the pains I found was that you obviously need to give your proxy the known types which the serializer can be aware of. So we need to add to the known types of the proxy programmatically. I came across the following blog post which showed me how easy it was http://bloggingabout.net/blogs/vagif/archive/2009/05/18/how-to-programmatically-define-known-types-in-wcf.aspx. First Pass So with this in mind, and inside a console app this was my first pass at consuming a service in process. First here is the proxy which I made making use of the Agatha IWcfRequestProcessor contract. public class InProcProxy : ClientBase<Agatha.Common.WCF.IWcfRequestProcessor>, Agatha.Common.WCF.IWcfRequestProcessor { public InProcProxy() { } public InProcProxy(string configurationName) : base(configurationName) { } public Agatha.Common.Response[] Process(params Agatha.Common.Request[] requests) { return Channel.Process(requests); } public void ProcessOneWayRequests(params Agatha.Common.OneWayRequest[] requests) { Channel.ProcessOneWayRequests(requests); } } So with the proxy in place I could then use this after opening the service so here is the code which I use inside the console app make the request. static void Main(string[] args) { ComponentRegistration.Register(); ServiceHost serviceHost = new ServiceHost(typeof(Agatha.ServiceLayer.WCF.WcfRequestProcessor)); serviceHost.Open(); Console.WriteLine("Service is running...."); using (var proxy = new InProcProxy()) { foreach (var operation in proxy.Endpoint.Contract.Operations) { foreach (var t in KnownTypeProvider.GetKnownTypes(null)) { operation.KnownTypes.Add(t); } } var request = new GetProductsRequest(); var responses = proxy.Process(new[] { request }); var response = (GetProductsResponse)responses[0]; Console.WriteLine("{0} Products have been retrieved", response.Products.Count); } serviceHost.Close(); Console.WriteLine("Finished"); Console.ReadLine(); } So what I used here is the KnownTypeProvider of Agatha to easily get all the types I need for the service/proxy and add them to the proxy. My Request handler for this was just a test one which always returned 2 products. public class GetProductsHandler : RequestHandler<GetProductsRequest,GetProductsResponse> { public override Agatha.Common.Response Handle(GetProductsRequest request) { return new GetProductsResponse { Products = new List<ProductDto> { new ProductDto{}, new ProductDto{} } }; } } Second Pass Now after I did this I started reading up some more on some resources including more by Davy Brion and others on Agatha. Now it turns out that the work I did above to create a derived class of the ClientBase implementing Agatha.Common.WCF.IWcfRequestProcessor was not necessary due to a nice class which is present inside the Agatha code base, RequestProcessorProxy which takes care of this for you! :-) So disregarding that class I made for the proxy and changing my code to use it I am now left with the following: static void Main(string[] args) { ComponentRegistration.Register(); ServiceHost serviceHost = new ServiceHost(typeof(Agatha.ServiceLayer.WCF.WcfRequestProcessor)); serviceHost.Open(); Console.WriteLine("Service is running...."); using (var proxy = new RequestProcessorProxy()) { var request = new GetProductsRequest(); var responses = proxy.Process(new[] { request }); var response = (GetProductsResponse)responses[0]; Console.WriteLine("{0} Products have been retrieved", response.Products.Count); } serviceHost.Close(); Console.WriteLine("Finished"); Console.ReadLine(); } Cheers for now, Andy References Agatha WCF InProcess Without WCF StructureMap.AutoMocking Cross Process Mocking Agatha Programming WCF Services by Juval Lowy

Read the article

Creating an AJAX Accordion Menu

- by jaullo

Introduction Ajax is a powerful addition to asp.net that provides new functionality in a simple and agile way This post is dedicated to creating a menu with ajax accordion type. About the Control The basic idea of this control, is to provide a serie of panels and show and hide information inside these panels. The use is very simple, we have to set each panel inside accordion control and give to each panel a Header and of course, we have to set the content of each panel. To use accordion control, u need the ajax control toolkit. know the basic propertyes of accordion control: Before start developing an accordion control, we have to know the basic properties for this control Other accordion propertyes FramesPerSecond - Number of frames per second used in the transition animations RequireOpenedPane - Prevent closing the currently opened pane when its header is clicked (which ensures one pane is always open). The default value is true. SuppressHeaderPostbacks - Prevent the client-side click handlers of elements inside a header from firing (this is especially useful when you want to include hyperlinks in your headers for accessibility) DataSource - The data source to use. DataBind() must be called. DataSourceID - The ID of the data source to use. DataMember - The member to bind to when using a DataSourceID AJAX Accordion Control Extender DataSource The Accordion Control extender of AJAX Control toolkit can also be used as DataBound control. You can bind the data retrieved from the database to the Accordion control. Accordion Control consists of properties such as DataSource and DataSourceID (we can se it above) that can be used to bind the data. HeaderTemplate can used to display the header or title for the pane generated by the Accordion control, a click on which will open or close the ContentTemplate generated by binding the data with Accordion extender. When DataSource is passed to the Accordion control, also use the DataBind method to bind the data. The Accordion control bound with data auto generates the expand/collapse panes along with their headers. This code represents the basic steps to bind the Accordion to a Datasource Collapse Public Sub getCategories() Dim sqlConn As New SqlConnection(conString) sqlConn.Open() Dim sqlSelect As New SqlCommand("SELECT * FROM Categories", sqlConn) sqlSelect.CommandType = System.Data.CommandType.Text Dim sqlAdapter As New SqlDataAdapter(sqlSelect) Dim myDataset As New DataSet() sqlAdapter.Fill(myDataset) sqlConn.Close() Accordion1.DataSource = myDataset.Tables(0).DefaultView Accordion1.DataBind()End Sub Protected Sub Accordion1_ItemDataBound(sender As Object, _ e As AjaxControlToolkit.AccordionItemEventArgs) If e.ItemType = AjaxControlToolkit.AccordionItemType.Content Then Dim sqlConn As New SqlConnection(conString) sqlConn.Open() Dim sqlSelect As New SqlCommand("SELECT productName " & _ "FROM Products where categoryID = '" + _ DirectCast(e.AccordionItem.FindControl("txt_categoryID"),_ HiddenField).Value + "'", sqlConn) sqlSelect.CommandType = System.Data.CommandType.Text Dim sqlAdapter As New SqlDataAdapter(sqlSelect) Dim myDataset As New DataSet() sqlAdapter.Fill(myDataset) sqlConn.Close() Dim grd As New GridView() grd = DirectCast(e.AccordionItem.FindControl("GridView1"), GridView) grd.DataSource = myDataset grd.DataBind() End If End Sub In the above code, we made two things, first, we made a sql select to database to retrieve all data from categories table, this data will be used to set the header and columns of the accordion. Collapse <asp:ScriptManager ID="ScriptManager1" runat="server"> </asp:ScriptManager> <ajaxToolkit:Accordion ID="Accordion1" runat="server" TransitionDuration="100" FramesPerSecond="200" FadeTransitions="true" RequireOpenedPane="false" OnItemDataBound="Accordion1_ItemDataBound" ContentCssClass="acc-content" HeaderCssClass="acc-header" HeaderSelectedCssClass="acc-selected"> <HeaderTemplate> <%#DataBinder.Eval(Container.DataItem,"categoryName") %> </HeaderTemplate> <ContentTemplate> <asp:HiddenField ID="txt_categoryID" runat="server" Value='<%#DataBinder.Eval(Container.DataItem,"categoryID") %>' /> <asp:GridView ID="GridView1" runat="server" RowStyle-BackColor="#ededed" RowStyle-HorizontalAlign="Left" AutoGenerateColumns="false" GridLines="None" CellPadding="2" CellSpacing="2" Width="300px"> <Columns> <asp:TemplateField HeaderStyle-HorizontalAlign="Left" HeaderText="Product Name" HeaderStyle-BackColor="#d1d1d1" HeaderStyle-ForeColor="#777777"> <ItemTemplate> <%#DataBinder.Eval(Container.DataItem,"productName") %> </ItemTemplate> </asp:TemplateField> </Columns> </asp:GridView> </ContentTemplate> </ajaxToolkit:Accordion> Here, we use <%#DataBinder.Eval(Container.DataItem,"categoryName") %> to bind accordion header with categoryName, so we made on header for each element found on database. Creating a basic accordion control As we know, to use any of the ajax components, there must be a registered ScriptManager on our site, which will be responsible for managing our controls. So the first thing we will do is create our script manager. Collapse <asp:ScriptManager ID="ScriptManager1" runat="server"></asp:ScriptManager> Then we define our accordion element and establish some basic properties: Collapse <cc1:Accordion ID="AccordionCtrl" runat="server" SelectedIndex="0" HeaderCssClass="accordionHeader" ContentCssClass="accordionContent" AutoSize="None" FadeTransitions="true" TransitionDuration="250" FramesPerSecond="40" For our work we must declare PANES accordion inside it, these breads will be responsible for contain information, links or information that we want to show. Collapse <Panes> <cc1:AccordionPane ID="AccordionPane0" runat="server"> <Header>Matenimiento</Header> <Content> <li><a href="mypagina.aspx">My página de prueba</a></li> </Content> </cc1:AccordionPane> To end this work, we have to close all panels and our accordion Collapse </Panes> </cc1:Accordion> Finally complete our example should look like: Collapse <asp:ScriptManager ID="ScriptManager1" runat="server"></asp:ScriptManager> <cc1:Accordion ID="AccordionCtrl" runat="server" SelectedIndex="0" HeaderCssClass="accordionHeader" ContentCssClass="accordionContent" AutoSize="None" FadeTransitions="true" TransitionDuration="250" FramesPerSecond="40"> <Panes> <cc1:AccordionPane ID="AccordionPane0" runat="server"> <Header>Matenimiento</Header> <Content> <li><a href="mypagina.aspx">My página de prueba</a></li> </Content> </cc1:AccordionPane> </Panes> </cc1:Accordion>

Read the article

Basics of Join Predicate Pushdown in Oracle

- by Maria Colgan

Happy New Year to all of our readers! We hope you all had a great holiday season. We start the new year by continuing our series on Optimizer transformations. This time it is the turn of Predicate Pushdown. I would like to thank Rafi Ahmed for the content of this blog.Normally, a view cannot be joined with an index-based nested loop (i.e., index access) join, since a view, in contrast with a base table, does not have an index defined on it. A view can only be joined with other tables using three methods: hash, nested loop, and sort-merge joins. Introduction The join predicate pushdown (JPPD) transformation allows a view to be joined with index-based nested-loop join method, which may provide a more optimal alternative. In the join predicate pushdown transformation, the view remains a separate query block, but it contains the join predicate, which is pushed down from its containing query block into the view. The view thus becomes correlated and must be evaluated for each row of the outer query block. These pushed-down join predicates, once inside the view, open up new index access paths on the base tables inside the view; this allows the view to be joined with index-based nested-loop join method, thereby enabling the optimizer to select an efficient execution plan. The join predicate pushdown transformation is not always optimal. The join predicate pushed-down view becomes correlated and it must be evaluated for each outer row; if there is a large number of outer rows, the cost of evaluating the view multiple times may make the nested-loop join suboptimal, and therefore joining the view with hash or sort-merge join method may be more efficient. The decision whether to push down join predicates into a view is determined by evaluating the costs of the outer query with and without the join predicate pushdown transformation under Oracle's cost-based query transformation framework. The join predicate pushdown transformation applies to both non-mergeable views and mergeable views and to pre-defined and inline views as well as to views generated internally by the optimizer during various transformations. The following shows the types of views on which join predicate pushdown is currently supported. UNION ALL/UNION view Outer-joined view Anti-joined view Semi-joined view DISTINCT view GROUP-BY view Examples Consider query A, which has an outer-joined view V. The view cannot be merged, as it contains two tables, and the join between these two tables must be performed before the join between the view and the outer table T4. A: SELECT T4.unique1, V.unique3 FROM T_4K T4, (SELECT T10.unique3, T10.hundred, T10.ten FROM T_5K T5, T_10K T10 WHERE T5.unique3 = T10.unique3) VWHERE T4.unique3 = V.hundred(+) AND T4.ten = V.ten(+) AND T4.thousand = 5; The following shows the non-default plan for query A generated by disabling join predicate pushdown. When query A undergoes join predicate pushdown, it yields query B. Note that query B is expressed in a non-standard SQL and shows an internal representation of the query. B: SELECT T4.unique1, V.unique3 FROM T_4K T4, (SELECT T10.unique3, T10.hundred, T10.ten FROM T_5K T5, T_10K T10 WHERE T5.unique3 = T10.unique3 AND T4.unique3 = V.hundred(+) AND T4.ten = V.ten(+)) V WHERE T4.thousand = 5; The execution plan for query B is shown below. In the execution plan BX, note the keyword 'VIEW PUSHED PREDICATE' indicates that the view has undergone the join predicate pushdown transformation. The join predicates (shown here in red) have been moved into the view V; these join predicates open up index access paths thereby enabling index-based nested-loop join of the view. With join predicate pushdown, the cost of query A has come down from 62 to 32. As mentioned earlier, the join predicate pushdown transformation is cost-based, and a join predicate pushed-down plan is selected only when it reduces the overall cost. Consider another example of a query C, which contains a view with the UNION ALL set operator.C: SELECT R.unique1, V.unique3 FROM T_5K R, (SELECT T1.unique3, T2.unique1+T1.unique1 FROM T_5K T1, T_10K T2 WHERE T1.unique1 = T2.unique1 UNION ALL SELECT T1.unique3, T2.unique2 FROM G_4K T1, T_10K T2 WHERE T1.unique1 = T2.unique1) V WHERE R.unique3 = V.unique3 and R.thousand < 1; The execution plan of query C is shown below. In the above, 'VIEW UNION ALL PUSHED PREDICATE' indicates that the UNION ALL view has undergone the join predicate pushdown transformation. As can be seen, here the join predicate has been replicated and pushed inside every branch of the UNION ALL view. The join predicates (shown here in red) open up index access paths thereby enabling index-based nested loop join of the view. Consider query D as an example of join predicate pushdown into a distinct view. We have the following cardinalities of the tables involved in query D: Sales (1,016,271), Customers (50,000), and Costs (787,766). D: SELECT C.cust_last_name, C.cust_city FROM customers C, (SELECT DISTINCT S.cust_id FROM sales S, costs CT WHERE S.prod_id = CT.prod_id and CT.unit_price > 70) V WHERE C.cust_state_province = 'CA' and C.cust_id = V.cust_id; The execution plan of query D is shown below. As shown in XD, when query D undergoes join predicate pushdown transformation, the expensive DISTINCT operator is removed and the join is converted into a semi-join; this is possible, since all the SELECT list items of the view participate in an equi-join with the outer tables. Under similar conditions, when a group-by view undergoes join predicate pushdown transformation, the expensive group-by operator can also be removed. With the join predicate pushdown transformation, the elapsed time of query D came down from 63 seconds to 5 seconds. Since distinct and group-by views are mergeable views, the cost-based transformation framework also compares the cost of merging the view with that of join predicate pushdown in selecting the most optimal execution plan. Summary We have tried to illustrate the basic ideas behind join predicate pushdown on different types of views by showing example queries that are quite simple. Oracle can handle far more complex queries and other types of views not shown here in the examples. Again many thanks to Rafi Ahmed for the content of this blog post.

Read the article

Validation in Silverlight

- by Timmy Kokke

Getting started with the basics Validation in Silverlight can get very complex pretty easy. The DataGrid control is the only control that does data validation automatically, but often you want to validate your own entry form. Values a user may enter in this form can be restricted by the customer and have to fit an exact fit to a list of requirements or you just want to prevent problems when saving the data to the database. Showing a message to the user when a value is entered is pretty straight forward as I’ll show you in the following example. This (default) Silverlight textbox is data-bound to a simple data class. It has to be bound in “Two-way” mode to be sure the source value is updated when the target value changes. The INotifyPropertyChanged interface must be implemented by the data class to get the notification system to work. When the property changes a simple check is performed and when it doesn’t match some criteria an ValidationException is thrown. The ValidatesOnExceptions binding attribute is set to True to tell the textbox it should handle the thrown ValidationException. Let’s have a look at some code now. The xaml should contain something like below. The most important part is inside the binding. In this case the Text property is bound to the “Name” property in TwoWay mode. It is also told to validate on exceptions. This property is false by default. <StackPanel Orientation="Horizontal"> <TextBox Width="150" x:Name="Name" Text="{Binding Path=Name, Mode=TwoWay, ValidatesOnExceptions=True}"/> <TextBlock Text="Name"/> </StackPanel> The data class in this first example is a very simplified person class with only one property: string Name. The INotifyPropertyChanged interface is implemented and the PropertyChanged event is fired when the Name property changes. When the property changes a check is performed to see if the new string is null or empty. If this is the case a ValidationException is thrown explaining that the entered value is invalid. public class PersonData:INotifyPropertyChanged { private string _name; public string Name { get { return _name; } set { if (_name != value) { if(string.IsNullOrEmpty(value)) throw new ValidationException("Name is required"); _name = value; if (PropertyChanged != null) PropertyChanged(this, new PropertyChangedEventArgs("Name")); } } } public event PropertyChangedEventHandler PropertyChanged=delegate { }; } The last thing that has to be done is letting binding an instance of the PersonData class to the DataContext of the control. This is done in the code behind file. public partial class Demo1 : UserControl { public Demo1() { InitializeComponent(); this.DataContext = new PersonData() {Name = "Johnny Walker"}; } } Error Summary In many cases you would have more than one entry control. A summary of errors would be nice in such case. With a few changes to the xaml an error summary, like below, can be added. First, add a namespace to the xaml so the control can be used. Add the following line to the header of the .xaml file. xmlns:Controls="clr-namespace:System.Windows.Controls;assembly=System.Windows.Controls.Data.Input" Next, add the control to the layout. To get the result as in the image showed earlier, add the control right above the StackPanel from the first example. It’s got a small margin to separate it from the textbox a little. <Controls:ValidationSummary Margin="8"/> The ValidationSummary control has to be notified that an ValidationException occurred. This can be done with a small change to the xaml too. Add the NotifyOnValidationError to the binding expression. By default this value is set to false, so nothing would be notified. Set the property to true to get it to work. <TextBox Width="150" x:Name="Name" Text="{Binding Name, Mode=TwoWay, ValidatesOnExceptions=True, NotifyOnValidationError=True}"/> Data annotation Validating data in the setter is one option, but not my personal favorite. It’s the easiest way if you have a single required value you want to check, but often you want to validate more. Besides, I don’t consider it best practice to write logic in setters. The way used by frameworks like WCF Ria Services is the use of attributes on the properties. Instead of throwing exceptions you have to call the static method ValidateProperty on the Validator class. This call stays always the same for a particular property, not even when you change the attributes on the property. To mark a property “Required” you can use the RequiredAttribute. This is what the Name property is going to look like: [Required] public string Name { get { return _name; } set { if (_name != value) { Validator.ValidateProperty(value, new ValidationContext(this, null, null){ MemberName = "Name" }); _name = value; if (PropertyChanged != null) PropertyChanged(this, new PropertyChangedEventArgs("Name")); } } } The ValidateProperty method takes the new value for the property and an instance of ValidationContext. The properties passed to the constructor of the ValidationContextclass are very straight forward. This part is the same every time. The only thing that changes is the MemberName property of the ValidationContext. Property has to hold the name of the property you want to validate. It’s the same value you provide the PropertyChangedEventArgs with. The System.ComponentModel.DataAnnotation contains eight different validation attributes including a base class to create your own. They are: RequiredAttribute Specifies that a value must be provided. RangeAttribute The provide value must fall in the specified range. RegularExpressionAttribute Validates is the value matches the regular expression. StringLengthAttribute Checks if the number of characters in a string falls between a minimum and maximum amount. CustomValidationAttribute Use a custom method to validate the value. DataTypeAttribute Specify a data type using an enum or a custom data type. EnumDataTypeAttribute Makes sure the value is found in a enum. ValidationAttribute A base class for custom validation attributes All of these will ensure that an validation exception is thrown, except the DataTypeAttribute. This attribute is used to provide some additional information about the property. You can use this information in your own code. [Required] [Range(0,125,ErrorMessage = "Value is not a valid age")] public int Age { It’s no problem to stack different validation attributes together. For example, when an Age is required and must fall in the range from 0 to 125: [Required, StringLength(255,MinimumLength = 3)] public string Name { Or in one row like this, for a required Name with at least 3 characters and a maximum of 255: Delayed validation Having properties marked as required can be very useful. The only downside to the technique described earlier is that you have to change the value in order to get it validated. What if you start out with empty an empty entry form? All fields are empty and thus won’t be validated. With this small trick you can validate at the moment the user click the submit button. <TextBox Width="150" x:Name="NameField" Text="{Binding Name, Mode=TwoWay, ValidatesOnExceptions=True, NotifyOnValidationError=True, UpdateSourceTrigger=Explicit}"/> By default, when a TwoWay bound control looses focus the value is updated. When you added validation like I’ve shown you earlier, the value is validated. To overcome this, you have to tell the binding update explicitly by setting the UpdateSourceTrigger binding property to Explicit: private void SubmitButtonClick(object sender, RoutedEventArgs e) { NameField.GetBindingExpression(TextBox.TextProperty).UpdateSource(); } This way, the binding is in two direction but the source is only updated, thus validated, when you tell it to. In the code behind you have to call the UpdateSource method on the binding expression, which you can get from the TextBox. Conclusion Data validation is something you’ll probably want on almost every entry form. I always thought it was hard to do, but it wasn’t. If you can throw an exception you can do validation. If you want to know anything more in depth about something I talked about in this article let me know. I might write an entire post to that.

Read the article

Michael Crump’s notes for 70-563 PRO – Designing and Developing Windows Applications usi

- by mbcrump

TIME TO GO PRO! This is my notes for 70-563 PRO – Designing and Developing Windows Applications using .NET Framework 3.5 I created it using several resources (various certification web sites, msdn, official ms 70-548 book). The reason that I created this review is because a) I am taking the exam. b) MS did not create a book for this exam. Use the(MS 70-548)book. c) To make sure I am familiar with each before the exam. I hope that it provides a good start for your own notes. I hope that someone finds this useful. At least, it will give you a starting point of what to expect to know on the PRO exam. Also, for those wondering, the PRO exam does contains very little code. It is basically all theory. 1. Validation Controls – How to prevent users from entering invalid data on forms. (MaskedTextBox control and RegEx) 2. ServiceController – used to start and control the behavior of existing services. 3. User Feedback (know winforms Status Bar, Tool Tips, Color, Error Provider, Context-Sensitive and Accessibility) 4. Specific (derived) exceptions must be handled before general (base class) exceptions. By moving the exception handling for the base type Exception to after exception handling of ArgumentNullException, all ArgumentNullException thrown by the Helper method will be caught and logged correctly. 5. A heartbeat method is a method exposed by a Web service that allows external applications to check on the status of the service. 6. New users must master key tasks quickly. Giving these tasks context and appropriate detail will help. However, advanced users will demand quicker paths. Shortcuts, accelerators, or toolbar buttons will speed things along for the advanced user. 7. MSBuild uses project files to instruct the build engine what to build and how to build it. MSBuild project files are XML files that adhere to the MSBuild XML schema. The MSBuild project files contain complete file, build action, and dependency information for each individual projects. 8. Evaluating whether or not to fix a bug involves a triage process. You must identify the bug's impact, set the priority, categorize it, and assign a developer. Many times the person doing the triage work will assign the bug to a developer for further investigation. In fact, the workflow for the bug work item inside of Team System supports this step. Developers are often asked to assess the impact of a given bug. This assessment helps the person doing the triage make a decision on how to proceed. When assessing the impact of a bug, you should consider time and resources to fix it, bug risk, and impacts of the bug. 9. In large projects it is generally impossible and unfeasible to fix all bugs because of the impact on schedule and budget. 10. Code reviews should be conducted by a technical lead or a technical peer. 11. Testing Applications 12. WCF Services – application state 13. SQL Server 2005 / 2008 Express Edition – reliable storage of data / Microsoft SQL Server 3.5 Compact Database– used for client computers to retrieve and save data from a shared location. 14. SQL Server 2008 Compact Edition – used for minimum possible memory and can synchronize data with a corporate SQL Server 2008 Database. Supports offline user and minimum dependency on external components. 15. MDI and SDI Forms (specifically IsMDIContainer) 16. GUID – in the case of data warehousing, it is important to define unique keys. 17. Encrypting / Security Data 18. Understanding of Isolated Storage/Proper location to store items 19. LINQ to SQL 20. Multithreaded access 21. ADO.NET Entity Framework model 22. Marshal.ReleaseComObject 23. Common User Interface Layout (ComboBox, ListBox, Listview, MaskedTextBox, TextBox, RichTextBox, SplitContainer, TableLayoutPanel, TabControl) 24. DataSets Class - http://msdn.microsoft.com/en-us/library/system.data.dataset%28VS.71%29.aspx 25. SQL Server 2008 Reporting Services (SSRS) 26. SystemIcons.Shield (Vista UAC) 27. Leverging stored procedures to perform data manipulation for a database schema that can change. 28. DataContext 29. Microsoft Windows Installer Packages, ClickOnce(bootstrapping features), XCopy. 30. Client Application Services – will authenticate users by using the same data source as a ASP.NET web application. 31. SQL Server 2008 Caching 32. StringBuilder 33. Accessibility Guidelines for Windows Applications http://msdn.microsoft.com/en-us/library/ms228004.aspx 34. Logging erros 35. Testing performance related issues. 36. Role Based Security, GenericIdentity and GenericPrincipal 37. System.Net.CookieContainer will store session data for webapps (see isolated storage for winforms) 38. .NET CLR Profiler tool will identify objects that cause performance issues. 39. ADO.NET Synchronization (SyncGroup) 40. Globalization - CultureInfo 41. IDisposable Interface- reports on several questions relating to this. 42. Adding timestamps to determine whether data has changed or not. 43. Converting applications to .NET Framework 3.5 44. MicrosoftReportViewer 45. Composite Controls 46. Windows Vista KNOWN folders. 47. Microsoft Sync Framework 48. TypeConverter -Provides a unified way of converting types of values to other types, as well as for accessing standard values and sub properties. http://msdn.microsoft.com/en-us/library/system.componentmodel.typeconverter.aspx 49. Concurrency control mechanisms The main categories of concurrency control mechanisms are: Optimistic - Delay the checking of whether a transaction meets the isolation rules (e.g., serializability and recoverability) until its end, without blocking any of its (read, write) operations, and then abort a transaction, if the desired rules are violated. Pessimistic - Block operations of a transaction, if they may cause violation of the rules. Semi-optimistic - Block operations in some situations, and do not block in other situations, while delaying rules checking to transaction's end, as done with optimistic. 50. AutoResetEvent 51. Microsoft Messaging Queue (MSMQ) 4.0 52. Bulk imports 53. KeyDown event of controls 54. WPF UI components 55. UI process layer 56. GAC (installing, removing and queuing) 57. Use a local database cache to reduce the network bandwidth used by applications. 58. Sound can easily be annoying and distracting to users, so use it judiciously. Always give users the option to turn sound off. Because a user might have sound off, never convey important information through sound alone.

Read the article

Overwriting TFS Web Services

- by javarg

In this blog I will share a technique I used to intercept TFS Web Services calls. This technique is a very invasive one and requires you to overwrite default TFS Web Services behavior. I only recommend taking such an approach when other means of TFS extensibility fail to provide the same functionality (this is not a supported TFS extensibility point). For instance, intercepting and aborting a Work Item change operation could be implemented using this approach (consider TFS Subscribers functionality before taking this approach, check Martin’s post about subscribers). So let’s get started. The technique consists in versioning TFS Web Services .asmx service classes. If you look into TFS’s ASMX services you will notice that versioning is supported by creating a class hierarchy between different product versions. For instance, let’s take the Work Item management service .asmx. Check the following .asmx file located at: %Program Files%\Microsoft Team Foundation Server 2010\Application Tier\Web Services\_tfs_resources\WorkItemTracking\v3.0\ClientService.asmx The .asmx references the class Microsoft.TeamFoundation.WorkItemTracking.Server.ClientService3: <%-- Copyright (c) Microsoft Corporation. All rights reserved. --%> <%@ webservice language="C#" Class="Microsoft.TeamFoundation.WorkItemTracking.Server.ClientService3" %> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The inheritance hierarchy for this service class follows: Note the naming convention used for service versioning (ClientService3, ClientService2, ClientService). We will need to overwrite the latest service version provided by the product (in this case ClientService3 for TFS 2010). The following example intercepts and analyzes WorkItem fields. Suppose we need to validate state changes with more advanced logic other than the provided validations/constraints of the process template. Important: Backup the original .asmx file and create one of your own. Create a Visual Studio Web App Project and include a new ASMX Web Service in the project Add the following references to the project (check the folder %Program Files%\Microsoft Team Foundation Server 2010\Application Tier\Web Services\bin\): Microsoft.TeamFoundation.Framework.Server.dll Microsoft.TeamFoundation.Server.dll Microsoft.TeamFoundation.Server.dll Microsoft.TeamFoundation.WorkItemTracking.Client.QueryLanguage.dll Microsoft.TeamFoundation.WorkItemTracking.Server.DataAccessLayer.dll Microsoft.TeamFoundation.WorkItemTracking.Server.DataServices.dll Replace the default service implementation with the something similar to the following code: Code Snippet /// <summary> /// Inherit from ClientService3 to overwrite default Implementation /// </summary> [WebService(Namespace = "http://schemas.microsoft.com/TeamFoundation/2005/06/WorkItemTracking/ClientServices/03", Description = "Custom Team Foundation WorkItemTracking ClientService Web Service")] public class CustomTfsClientService : ClientService3 { [WebMethod, SoapHeader("requestHeader", Direction = SoapHeaderDirection.In)] public override bool BulkUpdate( XmlElement package, out XmlElement result, MetadataTableHaveEntry[] metadataHave, out string dbStamp, out Payload metadata) { var xe = XElement.Parse(package.OuterXml); // We only intercept WorkItems Updates (we can easily extend this sample to capture any operation). var wit = xe.Element("UpdateWorkItem"); if (wit != null) { if (wit.Attribute("WorkItemID") != null) { int witId = (int)wit.Attribute("WorkItemID"); // With this Id. I can query TFS for more detailed information, using TFS Client API (assuming the WIT already exists). var stateChanged = wit.Element("Columns").Elements("Column").FirstOrDefault(c => (string)c.Attribute("Column") == "System.State"); if (stateChanged != null) { var newStateName = stateChanged.Element("Value").Value; if (newStateName == "Resolved") { throw new Exception("Cannot change state to Resolved!"); } } } } // Finally, we call base method implementation return base.BulkUpdate(package, out result, metadataHave, out dbStamp, out metadata); } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 4. Build your solution and overwrite the original .asmx with the new implementation referencing our new service version (don’t forget to backup it up first). 5. Copy your project’s .dll into the following path: %Program Files%\Microsoft Team Foundation Server 2010\Application Tier\Web Services\bin 6. Try saving a WorkItem into the Resolved state. Enjoy!

Read the article

CodePlex Daily Summary for Sunday, April 04, 2010

CodePlex Daily Summary for Sunday, April 04, 2010New ProjectsAcervo 2 - Gerenciador de coleções: Acervo 2 is a web application developed in ASP.NET 3.5 with Entity Framework, Coolite UI web controls and MySQL database that helps to catalog and ...AssemblyInfo Editor: AssemblyInfo Editor is a small Visual Studio 2010 extension I developed for my personal use mainly for automatically incrementing AssemblyVersion a...CommLine: It's a Command Line Interpreter. At the moment, it's a beta version, so I wait for developers that wanna help meFlowgraph Viewer: The flowgraph viewer enables users to view, build and share flowgraphs for the Crysis-franchise. It's built on Silverlight4, using MEF and Mvvmlight.Hash Calculator: WPF Windows 7 program to compute SHA1 & MD5 hash functions.MediaRSS library for .NET: This is a small set of libraries that allow you to create, read, and write MediaRSS files. By leveraging the syndication model object in .NET this...MEF Visualizer Tool: Helps to see what is going on inside the CompositionContainerone framework for developing asp.net project more elegent、flexible、and testable: if you are familiar with jsf、cdi、scoped javabean and work under asp.net, you may want to support aop and max flexibility and testability , all of ...Picasa Manager: A Silverlight Out Of Browser Application that Helps you manage your PicasaWeb albums in the easyest way possible.SharePhone: Windows Phone 7 library for connecting to SharePoint 2007/2010. Lets you work with SPWeb, SPList, reading/writing strong typed list items, user ...Silverlight Resource Extension: Silverlight Resource Extension. Extension silverlight project for use ResX resources and localize satellite dll.Silverlight Streamgraph: Streamgraph component for SilverlightTFTP Server: Managed TFTP server implementation, written in C#. Supports: - IPv4 and IPv6 - correct retry behavior. - TFTP options: block size, transfer size, a...Virtual UserGroup Video Helpers: This is a project that holds all the tools used by the C4MVC Virtual Usergroup. Tools written in C# and Powershell to automate, Live Meeting, Expr...xBlog: xBlog is a project to build a simple and extensible Blog Engine based on xml and linqXmlCodeEditor: XmlCodeEditor is a Silverlight 4 control based on RichTextControl that creates coloring and intellisense similar to the one in Visual Studio for ed...Zinc Launcher: Zinc Launcher is a simple Windows Media Center plugin that launches Zinc and attempts to manage the windows as seamlessly as possible. In addition ...New ReleasesAcervo 2 - Gerenciador de coleções: Acervo 2 - v1.0: Arquivos para implantação do sistema Acervo2 Aplicação web Web service Smart ClientAssemblyInfo Editor: Beta 1: Initial release of Assembly Info Editor. At this point, it is feature-complete and is relatively stable. There are undoubtedly some bugs to work o...Box2D.XNA: Box2D.XNA r70 Source Code and Solution: This version is synced to changeset 44697. This represents our official port of the C Box2D up to r70 on the Google Code project. With this versi...Boxee Launcher: Boxee Launcher Release 1.0.1.2: Will now stop Media Center playback before launching BoxeeBoxee Launcher: Boxee Launcher Release 1.0.1.3: Added a background window that attempts to display over the desktop and taskbar, and below Boxee and Media Center so that the desktop and taskbar a...CommLine: Beta Version 0.1: First Beta Of the AppCommLine: Source v0.1 Beta: Source Code C of 0.1 beta versionEncrypted Notes: Encrypted Notes 1.6.2: This is the latest version of Encrypted Notes (1.6.2), with general changes and improved randomness for the key generator. It has an installer that...Hash Calculator: HashCalculator: HashCalculator 1.0Hash Calculator: HashCalculator Source code: HashCalculator 1.0Hulu Launcher: Hulu Launcher 1.0.1.3: Added a background window that attempts to display over the desktop and taskbar, and below Hulu and Media Center so that the desktop and taskbar ar...Hulu Launcher: Hulu Launcher Release 1.0.1.2: Hulu Launcher will now stop playback in Media Center before launching Hulu Desktop.Innovative Games: 4.3 - Sprite Effects: Source code download for chapter 4.3 - "Sprite Effects"MediaRSS library for .NET: 0.1: Alpha release. Majority of MediaRSS spec is supported. A small set of unit test / sample code are included. A lightly tested CustomFormatter object...MEF Visualizer Tool: MEF Visualizer Tool 0.1: Help to see what going on in side CompositionContainer Container = new CompositionContainer( new AggregateCatalog( ...Ncqrs Framework - A CQRS framework for .NET: Ncqrs with sample application: This is the first release of the Ncqrs Framework. It contains the Ncqrs source code and a runnable sample application. All the code in this release...Rubik Cube's 3D Silverlight 3.0 Animated Solution: Rubik Cube 3D with Animated Solution: This project is a realization of Silverlight 3.0 Rubik Cube 3D with Animated Solution. The Solution is available for 3x3x3 cube, other features are...Scrabler: scrabler release 0.6.2.5: fixed a bug that werent executed some scriptsSharePhone: SharePhone: Initial release with basic functionality: Open SharePoint webs and subwebs Retrieve lists on SPWeb objects Read metadata/properties on lists ...SharePhone: SharePhone v.1.0.1: Fixed a bug that prevented saving list items to SharePointSharePoint Labs: SPLab4001A-FRA-Level100: SPLab4001A-FRA-Level100 This SharePoint Lab will teach you the first best practice you should apply when writing code with the SharePoint API. Lab ...Silverlight Resource Extension: ResourceExtension (alpha): Alpha version is not stable. Only for review.Silverlight Streamgraph: Port from processing.org: A port from the processing.org streamgraph. Code-heavy with very little XAML involved at this point.Theocratic Ministry School System: TMSS - Ver 1.1.1: What’s New! Added Menu Options 2010 Schedule Access 2007 Runtime There are still many uncompleted items so this is still a conceptual release....Theocratic Ministry School System: TMSS - Ver 1.1.2: Fixed the Schedule Import. Need needs to be tested. Click import button and make sure you can get the 2010 Schedule from the internet.thinktecture Starter STS (Community Edition): StarterSTS v1.0 RTW: Version 1.0 RTWTribe.Cache: Tribe.Cache Alpha - 0.2.0.0: Tribe.Cache Alpha - 0.2.0.0 - Now has sliding and absolute expiration on cache entries. Functional Alpha Release - But do not use in productionTwitterVB - A .NET Twitter Library: TwitterVB-2.3.1: This is mostly a minor release that adds br.st URL shortening to the menu (API key from http://br.st required)Virtu: Virtu 0.8.1: Source Requirements.NET Framework 3.5 with Service Pack 1 Visual Studio 2008 with Service Pack 1, or Visual C# 2008 Express Edition with Service Pa...Visual Studio DSite: Advanced C++ Calculator: An advanced visual c 2008 calculator that can do all your basic operations, plus some advanced mathematical functions. Source Code Only.xnaWebcam: xnaWebcam 0.3: xnaWebcam 0.3 Version 0.3: -ResolutionSet: 400x300 (Default), 800x600, 1024x720 -Settings Window got Icon -Settings Window Changes -DevConsole.cs ...Most Popular ProjectsRawrWBFS ManagerMicrosoft SQL Server Product Samples: DatabaseASP.NET Ajax LibrarySilverlight ToolkitAJAX Control ToolkitWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesDotNetNuke® Community EditionMost Active ProjectsGraffiti CMSnopCommerce. Open Source online shop e-commerce solution.RawrFacebook Developer ToolkitjQuery Library for SharePoint Web ServicesLINQ to TwitterBlogEngine.NETN2 CMSBase Class LibrariesFarseer Physics Engine

Read the article

CodePlex Daily Summary for Friday, September 07, 2012

CodePlex Daily Summary for Friday, September 07, 2012Popular ReleasesUmbraco CMS: Umbraco 4.9.0: Whats newThe media section has been overhauled to support HTML5 uploads, just drag and drop files in, even multiple files are supported on any HTML5 capable browser. The folder content overview is also much improved allowing you to filter it and perform common actions on your media items. The Rich Text Editor’s “Media” button now uses an embedder based on the open oEmbed standard (if you’re upgrading, enable the media button in the Rich Text Editor datatype settings and set TidyEditorConten...menu4web: menu4web 0.4.1 - javascript menu for web sites: This release is for those who believe that global variables are evil. menu4web has been wrapped into m4w singleton object. Added "Vertical Tabs" example which illustrates object notation.WinRT XAML Toolkit: WinRT XAML Toolkit - 1.2.1: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features AsyncUI extensions Controls and control extensions Converters Debugging helpers Imaging IO helpers VisualTree helpers Samples Recent changes NOTE: Namespace changes DebugConsol...iPDC - Free Phasor Data Concentrator: iPDC-v1.3.1: iPDC suite version-1.3.1, Modifications and Bug Fixed (from v 1.3.0) New User Manual for iPDC-v1.3.1 available on websites. Bug resolved : PMU Simulator TCP connection error and hang connection for client (PDC). Now PMU Simulator (server) can communicate more than one PDCs (clients) over TCP and UDP parallely. PMU Simulator is now sending the exact data frames as mentioned in data rate by user. PMU Simulator data rate has been verified by iPDC database entries and PMU Connection Tes...Microsoft SQL Server Product Samples: Database: AdventureWorks OData Feed: The AdventureWorks OData service exposes resources based on specific SQL views. The SQL views are a limited subset of the AdventureWorks database that results in several consuming scenarios: CompanySales Documents ManufacturingInstructions ProductCatalog TerritorySalesDrilldown WorkOrderRouting How to install the sample You can consume the AdventureWorks OData feed from http://services.odata.org/AdventureWorksV3/AdventureWorks.svc. You can also consume the AdventureWorks OData fe...Desktop Google Reader: 1.4.6: Sorting feeds alphabetical is now optional (see preferences window)DotNetNuke® Community Edition CMS: 06.02.03: Major Highlights Fixed issue where mailto: links were not working when sending bulk email Fixed issue where uses did not see friendship relationships Problem is in 6.2, which does not show in the Versions Affected list above. Fixed the issue with cascade deletes in comments in CoreMessaging_Notification Fixed UI issue when using a date fields as a required profile property during user registration Fixed error when running the product in debug mode Fixed visibility issue when...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.65: Fixed null-reference error in the build task constructor.B INI Sharp Library: B INI Sharp Library v1.0.0.0 Final Realsed: The frist realsedActive Social Migrator: ActiveSocialMigrator 1.0.0 Beta: Beta release for the Active Social Migration tool.EntLib.com????????: ??????demo??-For SQL 2005-2008: EntLibShopping ???v3.0 - ??????demo??，?????SQL SERVER 2005/2008/2008 R2/2012 ??????。 ??（??）??????。 THANKS.Sistem LPK Pemkot Semarang: Panduan Penggunaan Sistem LPK: Panduan cara menggunakan Aplikasi Sistem LPK Bagian Pembangunan Kota SemarangActive Forums for DotNetNuke CMS: Active Forums 5.0.0 RC: RC release of Active Forums 5.0.Droid Explorer: Droid Explorer 0.8.8.7 Beta: Bug in the display icon for apk's, will fix with next release Added fallback icon if unable to get the image/icon from the Cloud Service Removed some stale plugins that were either out dated or incomplete. Added handler for *.ab files for restoring backups Added plugin to create device backups Backups stored in %USERPROFILE%\Android Backups\%DEVICE_ID%\ Added custom folder icon for the android backups directory better error handling for installing an apk bug fixes for the Runn...The Visual Guide for Building Team Foundation Server 2012 Environments: Version 1: --Nearforums - ASP.NET MVC forum engine: Nearforums v8.5: Version 8.5 of Nearforums, the ASP.NET MVC Forum Engine. New features include: Built-in search engine using Lucene.NET Flood control improvements Notifications improvements: sync option and mail body View Roadmap for more details webdeploy package sha1 checksum: 961aff884a9187b6e8a86d68913cdd31f8deaf83WiX Toolset: WiX Toolset v3.6: WiX Toolset v3.6 introduces the Burn bootstrapper/chaining engine and support for Visual Studio 2012 and .NET Framework 4.5. Other minor functionality includes: WixDependencyExtension supports dependency checking among MSI packages. WixFirewallExtension supports more features of Windows Firewall. WixTagExtension supports Software Id Tagging. WixUtilExtension now supports recursive directory deletion. Melt simplifies pure-WiX patching by extracting .msi package content and updating .w...Iveely Search Engine: Iveely Search Engine （0.2.0）: ????ISE?0.1.0??，?????，ISE?0.2.0?????????，???????，????????20???follow?ISE，????，??ISE??????????，??????????，?????????，?????????0.2.0??????，??????????。 Iveely Search Engine ?0.2.0?????????“??????????”，??????，?????????，???????，???????????????????，????、????????????。???0.1.0????????????： 1. ??“????” ??。??????????，?????????，???????????????????。??：????????，????????????，??????????????????。??????。 2. ??“????”??。?0.1.0??????，???????，???????????????，?????????????，????????，?0.2.0?，???????...GmailDefaultMaker: GmailDefaultMaker 3.0.0.2: Add QQ Mail BugfixSmart Data Access layer: Smart Data access Layer Ver 3: In this version support executing inline query is added. Check Documentation section for detail.New ProjectsAdding 2013 Jewish Holidays for Outlook2003: Instruction: Copy the outlook.hol file to your compuer where Outlook2003 is installed. Double click the file, choose "Israel" and continue. That's it Agilcont System: Sistema de contabilidad para empresas privadas de preferencia para cajas que trabajan con efectivo en soles, dolares y con el material oroARB (A Request Broker): The idea is something like a Request Broker, but with some additional functionality.BATTLE.NET - SDK: This SDK provides the ability to use the Battle.net (Blizzard) Services for all supported Games such Diablo 3, World of Warcraft. Container Terminal System: SummaryDeclarative UX Streaming Data Language for the Cloud: Bringing a better communication paradigm for media and data..Get User Profile Information from SharePoint UserProfile Service: Used SharePoint object model to get the user profile information from the User Profile Service.Guess The City & State Windows 8 Source Code: Source code for Guess The City & State in Malaysia Windows 8 AppJquery Tree: This project is to demonstrate tree basic functionality.MCEBuddy 2.x: Convert and Remove Commercials for your Windows Media CenterMvcDesign: MvcDesign engine implementation projectMy Task Manager: This is a task manager module for DotNetNuke. I am using it to get started developing modules.MyAppwithbranches: MyAppwithbranchesProjecte prova: rpyGEO: pyGEO is a python package capable of parsing microarray data files. It also has a primitive plotting function.Scarlet Road: Scarlet Road is a top-down shooter. It's you against an unending horde of monsters.simplecounter: A simple counter, cick and counter.SiteEmpires: ????????Soundcloud Loader: Simple Tool for downloading Tracks from Soundcloud.Windows Phone Samples: Windows Phone code samples.

Read the article

The last MVVM you'll ever need?

- by Nuri Halperin

As my MVC projects mature and grow, the need to have some omnipresent, ambient model properties quickly emerge. The application no longer has only one dynamic pieced of data on the page: A sidebar with a shopping cart, some news flash on the side – pretty common stuff. The rub is that a controller is invoked in context of a single intended request. The rest of the data, even though it could be just as dynamic, is expected to appear on it's own. There are many solutions to this scenario. MVVM prescribes creating elaborate objects which expose your new data as a property on some uber-object with more properties exposing the "side show" ambient data. The reason I don't love this approach is because it forces fairly acute awareness of the view, and soon enough you have many MVVM objects laying around, and views have to start doing null-checks in order to ensure you really supplied all the values before binding to them. Ick. Just as unattractive is the ViewData dictionary. It's not strongly typed, and in both this and the MVVM approach someone has to populate these properties – n'est pas? Where does that live? With MVC2, we get the formerly-futures feature Html.RenderAction(). The feature allows you plant a line in a view, of the format: <% Html.RenderAction("SessionInterest", "Session"); %> While this syntax looks very clean, I can't help being bothered by it. MVC was touting a very strong separation of concerns, the Model taking on the role of the business logic, the controller handling route and performing minimal view-choosing operations and the views strictly focused on rendering out angled-bracket tags. The RenderAction() syntax has the view calling some controller and invoking it inline with it's runtime rendering. This – to my taste – embeds too much knowledge of controllers into the view's code – which was allegedly forbidden. The one way flow "Controller Receive Data –> Controller invoke Model –> Controller select view –> Controller Hand data to view" now gets a "View calls controller and gets it's own data" which is not so one-way anymore. Ick. I toyed with some other solutions a bit, including some base controllers, special view classes etc. My current favorite though is making use of the ExpandoObject and dynamic features with C# 4.0. If you follow Phil Haack or read a bit from David Heyden you can see the general picture emerging. The game changer is that using the new dynamic syntax, one can sprout properties on an object and make use of them in the view. Well that beats having a bunch of uni-purpose MVVM's any day! Rather than statically exposed properties, we'll just use the capability of adding members at runtime. Armed with new ideas and syntax, I went to work: First, I created a factory method to enrich the focuse object: public static class ModelExtension { public static dynamic Decorate(this Controller controller, object mainValue) { dynamic result = new ExpandoObject(); result.Value = mainValue; result.SessionInterest = CodeCampBL.SessoinInterest(); result.TagUsage = CodeCampBL.TagUsage(); return result; } } This gives me a nice fluent way to have the controller add the rest of the ambient "side show" items (SessionInterest, TagUsage in this demo) and expose them all as the Model: public ActionResult Index() { var data = SyndicationBL.Refresh(TWEET_SOURCE_URL); dynamic result = this.Decorate(data); return View(result); } So now what remains is that my view knows to expect a dynamic object (rather than statically typed) so that the ASP.NET page compiler won't barf: <%@ Page Language="C#" Title="Ambient Demo" MasterPageFile="~/Views/Shared/Ambient.Master" Inherits="System.Web.Mvc.ViewPage<dynamic>" %> Notice the generic ViewPage<dynamic>. It doesn't work otherwise. In the page itself, Model.Value property contains the main data returned from the controller. The nice thing about this, is that the master page (Ambient.Master) also inherits from the generic ViewMasterPage<dynamic>. So rather than the page worrying about all this ambient stuff, the side bars and panels for ambient data all reside in a master page, and can be rendered using the RenderPartial() syntax: <% Html.RenderPartial("TagCloud", Model.SessionInterest as Dictionary<string, int>); %> Note here that a cast is necessary. This is because although dynamic is magic, it can't figure out what type this property is, and wants you to give it a type so its binder can figure out the right property to bind to at runtime. I use as, you can cast if you like. So there we go – no violation of MVC, no explosion of MVVM models and voila – right? Well, I could not let this go without a tweak or two more. The first thing to improve, is that some views may not need all the properties. In that case, it would be a waste of resources to populate every property. The solution to this is simple: rather than exposing properties, I change d the factory method to expose lambdas - Func<T> really. So only if and when a view accesses a member of the dynamic object does it load the data. public static class ModelExtension { // take two.. lazy loading! public static dynamic LazyDecorate(this Controller c, object mainValue) { dynamic result = new ExpandoObject(); result.Value = mainValue; result.SessionInterest = new Func<Dictionary<string, int>>(() => CodeCampBL.SessoinInterest()); result.TagUsage = new Func<Dictionary<string, int>>(() => CodeCampBL.TagUsage()); return result; } } Now that lazy loading is in place, there's really no reason not to hook up all and any possible ambient property. Go nuts! Add them all in – they won't get invoked unless used. This now requires changing the signature of usage on the ambient properties methods –adding some parenthesis to the master view: <% Html.RenderPartial("TagCloud", Model.SessionInterest() as Dictionary<string, int>); %> And, of course, the controller needs to call LazyDecorate() rather than the old Decorate(). The final touch is to introduce a convenience method to the my Controller class , so that the tedium of calling Decorate() everywhere goes away. This is done quite simply by adding a bunch of methods, matching View(object), View(string,object) signatures of the Controller class: public ActionResult Index() { var data = SyndicationBL.Refresh(TWEET_SOURCE_URL); return AmbientView(data); } //these methods can reside in a base controller for the solution: public ViewResult AmbientView(dynamic data) { dynamic result = ModelExtension.LazyDecorate(this, data); return View(result); } public ViewResult AmbientView(string viewName, dynamic data) { dynamic result = ModelExtension.LazyDecorate(this, data); return View(viewName, result); } The call to AmbientView now replaces any call the View() that requires the ambient data. DRY sattisfied, lazy loading and no need to replace core pieces of the MVC pipeline. I call this a good MVC day. Enjoy!

Search Results

Search found 14801 results on 593 pages for 'base de datos'.

Page 365/593 | < Previous Page | 361 362 363 364 365 366 367 368 369 370 371 372 | Next Page >

- by user294750

- by Rick Strahl

- by paulschapman

- by thangchung

- by user2945880

- by Mohamed Meligy

- by digitaltoast

- by Mikey

- by Andrew Fashion

- by Favolas

- by Alex

- by Zeophlite

- by Alaa Alomari

- by Jordan Messina

- by kce

- by ehsanul

- by REA_ANDREW

- by jaullo

- by Maria Colgan

- by Timmy Kokke

- by mbcrump

- by javarg

- by Nuri Halperin

< Previous Page | 361 362 363 364 365 366 367 368 369 370 371 372 | Next Page >