Search Results

Search found 31968 results on 1279 pages for 'database training'.

Page 366/1279 | < Previous Page | 362 363 364 365 366 367 368 369 370 371 372 373  | Next Page >

  • Are Oracle Database CPU license limits enforced by software, and how do I check them?

    - by DrStalker
    I've inherited a windows VM running Oracle Database 10g. Currently the VM has only one CPU assigned to it, but I can boost this up to 4 with our VMWare licenses. What I'm not yet certain about is if the Oracle Software will get upset. Are Oracle DB CPU limits enforced by software, and if so how do I find out what they? If it's just a legal enforcement I'll hunt through the mass of unsorted paperwork I have left from previous managers to find what we're licensed for, but a quick software check would be nice.

    Read the article

  • Is it safe to Update and/or Insert records into an accounting software's database? (Pastel Evolution)

    - by user1020317
    Our CRM system can post transactions to our accounts software (Pastel Evolution), but it doesn't perform the required currency conversion. Both systems have different "base" currencies (because of our location), so the figure thats sent to Pastel evolution is right, but it is reflected in the wrong currency. The CRM uses an ODBC connection to post figures to Evolution. I can make a tool which sits between the two systems which can update and/or insert the transactions into Pastel, by mimicking what the CRM would have done if it was doing the POST. Is it safe for me to mimic and/or update these transactions directly in the Pastel database? Is it common for important validation to be performed in the ODBC layer, and if so, can I tap into an applications ODBC, or is there a custom driver built by the CRM to communicate with the DB?

    Read the article

  • What's the difference between instance and server process in Oracle database.

    - by Summer_More_More_Tea
    Hi folks: I'm now getting familiar with Oracle database. Unfortunately, I'm puzzled by the concept instance and server process. My question is what's the difference between instance and server process. What's more, what's the life cycle of instance and server process respectively? My textbook at hand is about Oracle 9i, which doesn't give me a clear explanation. Any reply will be appreciated. Thanks in advance. Kind regards!

    Read the article

  • SQL SERVER – Microsoft SQL Server Migration Assistant V6.0 Released

    - by Pinal Dave
    Every company makes a different decision about the database when they start, but as they move forward they mature and make the decision which is based on their experience and best interest of the organization. Similarly, quite a many organizations make different decisions on database, like Sybase, MySQL, Oracle or Access and as time passes by they learn that now they want to move to a different platform. Microsoft makes it easy for SQL Server professional by releasing various Migration Assistant tools. Last week, Microsoft released Microsoft SQL Server Migration Assistant v6.0. Here are different tools released earlier last week to migrate various product to SQL Server. Microsoft SQL Server Migration Assistant v6.0 for Sybase SQL Server Migration Assistant (SSMA) is a free supported tool from Microsoft that simplifies database migration process from Sybase Adaptive Server Enterprise (ASE) to SQL Server and Azure SQL DB. SSMA automates all aspects of migration including migration assessment analysis, schema and SQL statement conversion, data migration as well as migration testing. Microsoft SQL Server Migration Assistant v6.0 for MySQL SQL Server Migration Assistant (SSMA) is a free supported tool from Microsoft that simplifies database migration process from MySQL to SQL Server and Azure SQL DB. SSMA automates all aspects of migration including migration assessment analysis, schema and SQL statement conversion, data migration as well as migration testing. Microsoft SQL Server Migration Assistant v6.0 for Oracle SQL Server Migration Assistant (SSMA) is a free supported tool from Microsoft that simplifies database migration process from Oracle to SQL Server and Azure SQL DB. SSMA automates all aspects of migration including migration assessment analysis, schema and SQL statement conversion, data migration as well as migration testing. Microsoft SQL Server Migration Assistant v6.0 for Access SQL Server Migration Assistant (SSMA) is a free supported tool from Microsoft that simplifies database migration process from Access to SQL Server. SSMA for Access automates conversion of Microsoft Access database objects to SQL Server database objects, loads the objects into SQL Server and Azure SQL DB, and then migrates data from Microsoft Access to SQL Server and Azure SQL DB. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Download, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: SQL Migration

    Read the article

  • SQL SERVER – Installing AdventureWorks for SQL Server 2011

    - by pinaldave
    I just began with SQL Server 2011 Denali CTP1. The very first thing, I realized that there is no AdventureWorks Sample Database available for Denali. I quickly searched online and reached to Microsoft documentations where it provides information of the how to install (restore) AdventureWorks for SQL Server 2011 for Denali. Download the AdventureWorks from here. Run following script (replace your path of mdf file. CREATE DATABASE AdventureWorks2008R2 ON (FILENAME = 'C:\SQL 11 CTP1\CTP1\AdventureWorks2008R2_Data.mdf') FOR ATTACH_REBUILD_LOG ; When you run above script it will give you following message and you are DONE! File activation failure. The physical file name "C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\AdventureWorks2008R2_Log.ldf" may be incorrect. New log file 'C:\SQL 11 CTP1\CTP1\AdventureWorks2008R2_log.ldf' was created. Converting database 'AdventureWorks2008R2' from version 679 to the current version 684. Database 'AdventureWorks2008R2' running the upgrade step from version 679 to version 680. Database 'AdventureWorks2008R2' running the upgrade step from version 680 to version 681. Database 'AdventureWorks2008R2' running the upgrade step from version 681 to version 682. Database 'AdventureWorks2008R2' running the upgrade step from version 682 to version 683. Database 'AdventureWorks2008R2' running the upgrade step from version 683 to version 684. I will soon write my experience about Denali. However, SQL Server Management Studio more started to look a like Visual Studio. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Backup and Restore, SQL Query, SQL Scripts, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Oracle WebCenter Partner Program

    - by kellsey.ruppel
    In competitive marketplaces, your company needs to quickly respond to changes and new trends, in order to open opportunities and build long-term growth. Oracle has a variety of next-generation services, solutions and resources that will leverage the differentiators in your offerings. Name your partnering needs: Oracle has the answer. This week we’d like to focus on Partners and the value your organization can gain from working with the Oracle PartnerNetwork. The Oracle PartnerNetwork will empower your company with exceptional resources to distinguish your offerings from the competition, seize opportunities, and increase your sales. We’re happy to welcome Christine Kungl, and Brian Buzzell, from Oracle’s World Wide Alliances & Channels (WWA&C) WebCenter Partner Enablement team, as today’s guests on the Oracle WebCenter blog. Q: What is the Oracle PartnerNetwork (OPN)?A: Christine: Oracle’s PartnerNetwork (OPN) is a collaborative partnership which allows registered companies specific added value resources to help differentiate themselves from their competition. Through OPN programs it provides companies the ability to seize and target opportunities, educate and train their teams, and leverage unparalleled opportunity given Oracle’s large market footprint. OPN’s multi-level programs are targeted at different levels allowing companies to grow and evolve with Oracle based on their business needs.  As part of their OPN memberships partners are encouraged to become OPN Specialized allowing those partners additional differentiation in Oracle’s Partner Network Community.  Q: What is an OPN Specialization and what resources are available for Specialized Partners?A: Brian: Oracle wanted a better way for our partners to differentiate their special skills and expertise, as well a more effective way to communicate that difference to customers.  Oracle’s expanding product portfolio demanded that we be able to identify partners with significant product knowledge—those who had made an investment in Oracle and a continuing commitment to deliver Oracle solutions. And with more than 30,000 Oracle partners around the world, Oracle needed a way for our customers to choose the right partner for their business. So how did Oracle meet this need? With the new partner program:  Oracle PartnerNetwork (OPN) Specialized. In this new program, Oracle partners are: Specialized :  Differentiating themselves from the competition with expertise that set them apart Recognized:  Being acknowledged for investing in becoming Oracle experts in specialized areas. Preferred :  Connecting with potential customers who are seeking  value-added solutions for their business OPN Specialized provides all partners with educational opportunities, training, and tools specially designed to build competency and grow business.  Partners can serve their customers better through key resources:OPN Specialized Knowledge Zones – Located on the updated and enhanced OPN portal— provide a single point of entry for all education and training information for Oracle partners. Enablement 2.0 Resources —Enablement 2.0 helps Oracle partners build their competencies and skills through a variety of educational opportunities and expanded training choices. These resources include: Enablement 2.0 “Boot camps” provide three-tiered learning levels that help jump-start partner training The role-based training covers Oracle’s application and technology products and offers a combination of classroom lectures, hands-on lab exercises, and case studies. Enablement 2.0 Interactive guided learning paths (GLPs) with recommendations on how to achieve specialization Upgraded partner solution kits Enhanced, specialized business centers available 24/7 around the globe on the OPN portal OPN Competency Center—Tracking ProgressThe OPN Competency Center keeps track as a partner applies for and achieves specialization in selected areas. You start with an assessment that compares your organization’s current skills and experience with the requirements for specialization in the area you have chosen. The OPN Competency Center then provides a roadmap that itemizes the skills and the knowledge you need to earn specialized status. In summary, OPN Specialization not only includes key training resources but a way to track and show progression for your partner organization. Q: What is are the OPN Membership Levels and what are the benefits?A:  Christine: The base OPN membership levels are: Remarketer: At the Remarketer level, retailers can choose to resell select Oracle products with the backing of authorized, regionally located, value-added distributors (VADs). The Remarketer level has no fees and no partner agreement with Oracle, but does offer online training and sales tools through the OPN portal.Program Details: RemarketerSilver Level: The Silver level is for Oracle partners who are focused on reselling and developing business with products ordered through the Oracle 1-Click Ordering Program. The Silver level provides a cost-effective, yet scalable way for partners to start an OPN Specialized membership and offers a substantial set of benefits that lets partners increase their competitive positioning. Program Details: SilverGold Level: Gold-level partners have the ability to specialize, helping them grow their business and create differentiation in the marketplace. Oracle partners at the Gold level can develop, sell, or implement the full stack of Oracle solutions and can apply to resell Oracle Applications.Program Details: GoldPlatinum Level: The Platinum level is for Oracle partners who want the highest level of benefits and are committed to reaching a minimum of five specializations. Platinum partners are recognized for their expertise in a broad range of products and technology, and receive dedicated support from Oracle.Program Details: PlatinumIn addition we recently introduced a new level:Diamond Level: This level is the most prestigious level of OPN Specialized. It allows companies to differentiate further because of their focused depth and breadth of their expertise. Program Details: DiamondSo as you can see there are various levels cost effective ways that Partners can get assistance, differentiation through OPN membership. Q: What role does the Oracle's World Wide Alliances & Channels (WWA&C), Partner Enablement teams and the WebCenter Community play?  A: Brian: Oracle’s WWA&C teams are responsible for manage relationships, educating their teams, creating go-to-market solutions and fostering communities for Oracle partners worldwide.  The WebCenter Partner Enablement Middleware Team is tasked to create, manage and distribute Specialization resources for the WebCenter Partner community. Q: What WebCenter Specializations are currently available?A: Christine:  As of now here are the following WebCenter Specializations and their availability: Oracle WebCenter Portal Specialization (Oracle WebCenter Portal): Available NowThe Oracle WebCenter Specialization provides insight into the following products: WebCenter Services, WebCenter Spaces, and WebLogic Portal.Oracle WebCenter Specialized Partners can efficiently use Oracle WebCenter products to create social applications, enterprise portals, communities, composite applications, and Internet or intranet Web sites on a standards-based, service-oriented architecture (SOA). The suite combines the development of rich internet applications; a multi-channel portal framework; and a suite of horizontal WebCenter applications, which provide content, presence, and social networking capabilities to create a highly interactive user experience. Oracle WebCenter Content Specialization: Available NowThe Oracle WebCenter Content Specialization provides insight into the following products; Universal Content Management, WebCenter Records Management, WebCenter Imaging, WebCenter Distributed Capture, and WebCenter Capture.Oracle WebCenter Content Specialized Partners can efficiently build content-rich business applications, reuse content, and integrate hundreds of content services with other business applications. This allows our customers to decrease costs, automate processes, reduce resource bottlenecks, share content effectively, minimize the number of lost documents, and better manage risk. Oracle WebCenter Sites Specialization: Available Q1 2012Oracle WebCenter Sites is part of the broader Oracle WebCenter platform that provides organizations with a complete customer experience management solution.  Partners that align with the new Oracle WebCenter Sites platform allow their customers organizations to: Leverage customer information from all channels and systems Manage interactions across all channels Unify commerce, merchandising, marketing, and service across all channels Provide personalized, choreographed consumer journeys across all channels Integrate order orchestration, supply chain management and order fulfillment Q: What criteria does the Partner organization need to achieve Specialization? What about individual Sales, PreSales & Implementation Specialist/Technical consultants?A: Brian: Each Oracle WebCenter Specialization has unique Business Criteria that must be met in order to achieve that Specialization.  This includes a unique number of transactions (co-sell, re-sell, and referral), customer references and then unique number of specialists as part of a partner team (Sales, Pre-Sales, Implementation, and Support).   Each WebCenter Specialization provides training resources (GLPs, BootCamps, Assessments and Exams for individuals on a partner’s staff to fulfill those requirements.  That criterion can be found for each Specialization on the Specialize tab for each WebCenter Knowledge Zone.  Here are the sample criteria, recommended courses, exams for the WebCenter Portal Specialization: WebCenter Portal Specialization Criteria Q: Do you have any suggestions on the best way for partners to get started if they would like to know more?A: Christine:   The best way to start is for partners is look at their business and core Oracle team focus and then look to become specialized in one or more areas.  Once you have selected the Specializations that are right for your business, you need to follow the first 3 key steps described below. The fourth step outlines the additional process to follow if you meet the criteria to be Advanced Specialized. Note that Step 4 may not be done without first following Steps 1-3.1. Join the Knowledge Zone(s) where you want to achieve Specialized status Go to the Knowledge Zone lick on the "Why Partner" tab Click on the "Join Knowledge Zone" link 2. Meet the Specialization criteria - Define and implement plans in your organization to achieve the competency and business criteria targets of the Specialization. (Note: Worldwide OPN members at the Gold, Platinum, or Diamond level and their Associates at the Gold, Platinum, or Diamond level may count their collective resources to meet the business and competency criteria required for specialization in this area.) 3. Apply for Specialization – when you have met the business and competency criteria required, inform Oracle by completing the following steps: Click on the "Specialize" tab in the Knowledge Zone Click on the "Apply Now" button Complete the online application form Oracle will validate the information provided, and once approved, you will receive notification from Oracle of your awarded Specialized status. Need more information? Access our Step by Step Guide (PDF) 4. Apply for Advanced Specialization (Optional) – If your company has on staff 50 unique Certified Implementation Specialists in your company's approved Specialization's product set, let Oracle know by following these steps: Ensure that you have 50 or more unique individuals that are Certified Implementation Specialists in the specific Specialization awarded to your company If you are pooling resources from another Associate or Worldwide entity, ensure you know that company’s name and country Have your Oracle PRM Administrator complete the online Advanced Specialization Application Oracle will validate the information provided, and once approved, you will receive notification from Oracle of your awarded Advanced Specialized status. There are additional resources on OPN as well as the broader WebCenter Community: v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • The Low Down Dirty Azure Blues

    - by SGWellens
    Remember the SETI screen savers that used to be on everyone's computer? As far I as know, it was the first bona-fide use of "Cloud" computing…albeit an ad hoc cloud. I still think it was a brilliant leveraging of computing power. My interest in clouds was re-piqued when I went to a technical seminar at the local .Net User Group. The speaker was Mike Benkovitch and he expounded magnificently on the virtues of the Azure platform. Mike always does a good job. One killer reason he gave for cloud computing is instant scalability. Not applicable for most applications, but it is there if needed. I have a bunch of files stored on Microsoft's SkyDrive platform which is cloud storage. It is painfully slow. Accessing a file means going through layers and layers of software, redirections and security. Am I complaining? Hell no! It's free! So my opinions of Cloud Computing are both skeptical and appreciative. What intrigued me at the seminar, in addition to its other features, is that Azure can serve as a web hosting platform. I have a client with an Asp.Net web site I developed who is not happy with the performance of their current hosting service. I checked the cost of Azure and since the site has low bandwidth/space requirements the cost would be competitive with the existing host provider: Azure Pricing Calculator. And, Azure has a three month free trial. Perfect! I could try moving the website and see how it works for free. I went through the signup process. Everything was proceeding fine until I went to the MS SQL database management screen. A popup window informed me that I needed to install Silverlight on my machine. Silverlight? No thanks. Buh-Bye. I half-heartedly found the Azure support button and logged a ticket telling them I didn't want Silverlight on my machine. Within 4 to 6 hours (and a myriad (5) of automated support emails) they sent me a link to a database management page that did not require Silverlight. Thanks! I was able to create a database immediately. One really nice feature was that after creating the database, I was given a list of connection strings. I went to the current host provider, made a backup of the database and saved it to my machine. I attached to the remote database using SQL Server Studio 2012 and looked for the Restore menu item. It was missing. So I tried using the SQL command: RESTORE DATABASE MyDatabase FROM DISK ='C:\temp\MyBackup.bak' Msg 40510, Level 16, State 1, Line 1 Statement 'RESTORE DATABASE' is not supported in this version of SQL Server. Are you kidding me? Why on earth…? This can't be happening! I opened both the source database and destination database in SQL Management Studio. I right clicked the source database, selected "Tasks" and noticed a menu selection called "Deploy Database to SQL Azure" Are you kidding me? Could it be? Oh yes, it be! There was a small problem because the database already existed on the Azure machine, I deployed to a new name, deleted the existing database and renamed the deployed database to what I needed. It was ridiculously easy. Being able to attach SQL Management Studio to remote databases is an awesome but scary feature. You can limit the IP addresses that can access the database which enhances security but when you give people, any people, me included, that much power, one errant mouse click could bring a live system down. My Advice: Tread softly and carry a large backup thumb-drive. Then I created a web site, the URL it returned look something like this: http://MyWebSite.azurewebsites.net/ Azure supports FTP, but I couldn't figure out the settings until I downloaded the publishing profile. It was an XML file that contained the needed information. I still couldn't connect with my FTP client (FileZilla). After about an hour of messing around, I deleted the port number from the FileZilla setup page….and voila, I was in like Flynn.   There are other options of deploying directly from Visual Studio, TFS, etc. but I do not like integrated tools that do things without my asking: It's usually hard to figure out what they did and how to undo it. I uploaded the aspx , cs , webconfig, etc. files. Bu it didn't run. The site I ported was in .NET 3.5. The Azure website configuration page gave me a choice between .NET 2.0 and 4.0. So, I switched to Visual Studio 2010, chose .NET 4.0 and upgraded the site. Of course I have the original version completely backed up and stored in a granite cave beneath the Nevada desert. And I have a backup CD under my pillow. The site uses ReportViewer to generate PDF documents. Of course it was the wrong version. I removed the old references to version 9 and added new references to version 10 (*see note below). Since the DLLs were not on the Azure Server, I uploaded them to the bin directory, crossed my fingers, burned some incense and gave it a try. After some fiddling around it ran. I don't know if I did anything particular to make it work or it just needed time to sort things out. However, one critical feature didn't work: ReportViewer could not programmatically generate PDF documents. I was getting this exception: "An error occurred during local report processing. Parameter is not valid." Rats. I did some searching and found other people were having the same problem, so I added a post saying I was having the same problem: http://social.msdn.microsoft.com/Forums/en-US/windowsazurewebsitespreview/thread/b4a6eb43-0013-435f-9d11-00ee26a8d017 Currently they are looking into this problem and I am waiting for the results. Hence I had the time to write this BLOG entry. How lucky you are. This was the last message I got from the Microsoft person: Hi Steve, Windows Azure Web Sites is a multi-tenant environment. For security issue, we limited some API calls. Unfortunately, some GDI APIS required by the PDF converting function are in this list. We have noticed this issue, and still investigation the best way to go. At this moment, there is no news to share. Sorry about this. Will keep you posted. If I had to guess, I would say they are concerned with people uploading images and doing intensive graphics programming which would hog CPU time.  But that is just a guess. Another problem. While trying to resolve the ReportViewer problem, I tried to write a file to the PDF directory to see if there was a permissions problem with some test code: String MyPath = MapPath(@"~\PDFs\Test.txt"); File.WriteAllText(MyPath, "Hello Azure");     I got this message: Access to the path <my path> is denied. After some research, I understood that since Azure is a cloud based platform, it can't allow web applications to save files to local directories. The application could be moved or replicated as scaling occurs and trying to manage local files would be problematic to say the least. There are other options: Use the Azure APIs to get a path. That way the location of the storage is separated from the application. However, the web site is then tied Azure and can't be moved to another hosting platform. Use the ApplicationData folder (not recommended). Write to BLOB storage. Or, I could try and stream the PDF output directly to the email and not save a file. I'm not going to work on a final solution until the ReportViewer is fixed. I am just sharing some of the things you need to be aware of if you decide to use Azure. I got this information from here. (Note the author of the BLOG added a comment saying he has updated his entry). Is my memory faulty? While getting this BLOG ready, I tried to write the test file again. And it worked. My memory is incorrect, or much more likely, something changed on the server…perhaps while they are trying to get ReportViewer to work. (Anyway, that's my story and I'm sticking to it). *Note: Since Visual Studio 2010 Express doesn't include a Report Editor, I downloaded and installed SQL Server Report Builder 2.0. It is a standalone Report Editor to replace the one not in Visual Studio 2010 Express. I hope someone finds this useful. Steve Wellens CodeProject

    Read the article

  • Quick guide to Oracle IRM 11g: Server installation

    - by Simon Thorpe
    Quick guide to Oracle IRM 11g index This is the first of a set of articles designed to assist with the successful installation, configuration and deployment of a document security solution using Oracle IRM. This article goes through a set of simple instructions which detail how to download, install and configure the IRM server, the starting point for building a document security solution. This article contains a subset of information from the official documentation and is focused on installing the server on Oracle Enterprise Linux. If you are planning to deploy on a non-Linux platform, you will need to reference the documentation for platform specific information. Contents Introduction Downloading the software Preparing a database Creating the schema WebLogic Server installation Installing Oracle IRM Introduction Because we are using Oracle Enterprise Linux in this guide, and before we get into the detail of IRM, i'd like to share some tips with Linux to make life a bit easier.Use a 64bit platform, IRM 11g runs just fine on a 32bit server but with 64bit you will build a more future proof service. Download and install the latest Java JDK package. Make sure you get the 64bit version if you are on a 64bit server. Configure Linux to use a good Yum server to simplify installing packages. For Oracle Enterprise Linux we maintain a great public Yum here. Have at least 20GB of free disk space on the partition you intend to install the IRM server. The downloads are big, then you extract them and then install. This quickly consumes disk space which you can easily recover by deleting the downloaded and extracted files after wards. But it's nice to have the disk space spare to keep these around in case you need to restart any part of the installation process again. Downloading the software OK, so before you can do anything, you need the software install kits. Luckily Oracle allows you to freely download every technology we create. You'll need to get the following; Oracle WebLogic Server Oracle Database Oracle Repository Creation Utility (rcu) Oracle IRM server You can use Microsoft SQL server 2005 or 2008, in this guide i've used Oracle RDBMS 11gR2 for Linux. Preparing the database I'm not going to go through the finer points of installing the database. There are many very good guides on installing the Oracle Database. However one thing I would suggest you think about is enabling TDE, network encryption and using Database Vault. These Oracle database security technologies are excellent for creating a complete end to end security solution. No point in going to all the effort to secure document access with IRM when someone can go directly to the database and assign themselves rights to documents. To understand this further, you can see a video of the IRM service using these database security technologies here. With a database up and running we need to create a schema to hold the IRM data. This schema contains the rights model, cryptographic keys, user account id's and associated rights etc. Creating the IRM database schema Oracle uses the Repository Creation Tool which builds your schema, extract the files from the rcu zip. Then in a terminal window; cd /oracle/install/rcu/bin ./rcu This will launch the Repository Creation Tool and you will be presented with the image to the right. Hit next and continue onto the next dialog. You are asked if you are going to be creating a new schema or wish to drop an existing one, you obviously just need to click next at this point to create a new schema. The RCU next needs to know where your database is so you'll need the following details of your database instance. Below, for reference, is the information for my installation. Hostname: irm.oracle.demo Port: 1521 (This is the default TCP port for the Oracle Database) Service Name: irm.oracle.demo. Note this is not the SID, but the service name. Username: sys Password: ******** Role: SYSDBA And then select next. Because the RCU contains schemas for many of the Oracle Technologies, you now need to select to just deploy the Oracle IRM schema. Open the section under "Enterprise Content Management" and tick the "Oracle Information Rights Management" component. Note that you also get the chance to select a prefix which defaults to "DEV" (for development). I usually change this to something that reflects my own install. PROD for a production system, INT for internal only etc. The next step asks for the passwords for the schema users. We are only creating one schema here so you just enter one password. Some brave souls store this password in an Excel spreadsheet which is then secure against the IRM server you're about to install in this guide. Nearing the end of the schema creation is the mapping of the tablespaces to the schema. Note I had setup a table space already that was encrypted using TDE and at this point I was able to select that tablespace by clicking in the "Default Tablespace" column. The next dialog confirms your actions and clicking on next causes it to create the schema and default data. After this you are presented with the completion summary. WebLogic Server installation The database is now ready and the next step is to install the application server. Oracle IRM 11g is a JEE application and currently only supported in Oracle WebLogic Server. So the next step is get WebLogic Server installed, which is pretty easy. Depending on the version you download, you either run the binary or for a 64 bit platform (like mine) run the following command. java -d64 -jar wls1033_generic.jar And in the resulting dialog hit next to start walking through the install. Next choose a directory into which you will install WebLogic Server. I like to change from the default and install into /oracle/. Then all my software goes into this one folder, all owned by the "oracle" user. The next dialog asks for your Oracle support information to ensure you are kept up to date. If you have an Oracle support account, enter your details but for most evaluation systems I leave these fields blank. Again, for evaluation or development systems, I usually stick with the "Typical" install type which you are next asked for. Next you are asked for the JDK which will be used for the server. When installing from the generic jar on a 64bit platform like in this guide, no JDK is bundled with the installer. But as you can see in the image on the right, that it does a good job of detecting the one you've got installed. Defaults for the install directories are usually taken, no changes here, just click next. And finally we are ready to install, hit next, sit back and relax. Typically this takes about 10 minutes. After the install, do not run the quick start, we need to deploy the IRM install itself from which we will create a new WebLogic domain. For now just hit done and lets move to the final step of the installation process. Installing Oracle IRM The last piece of the puzzle to getting your environment ready is to deploy the IRM files themselves. Unzip the Oracle Enterprise Content Management 11g zip file and it will create a Disk1 directory. Switch to this folder and in the console run ./runInstaller. This will launch the installer which will also ask for the location of the JDK. Look at the image on the right for the detail. You should now see the first stage of the IRM installation. The dialog warns you need to have a WebLogic server installed and have created the schema's, but you've just done all that above (I hope) so we are ready to go. The installer now checks that you have all the required libraries installed and other system parameters are correct. Because nearly all of my development and evaluation installations have the database server on the same system, the installer passes these checks without issue... Next... Now chose where to install the IRM files, you must install into the same Middleware Home as the WebLogic Server installation you just performed. Usually the installer already defaults to this location anyway. I also tend to change the Oracle Home Directory to Oracle_IRM so it's clear this is just an IRM install. The summary page tells you about space needed to deploy the files. Unfortunately the IRM install comes with all of the other Oracle ECM software, you can't just select the IRM files, everything gets deployed to disk and uses 1.6GB of space! Not fun, but Oracle has to package up similar technologies otherwise we would have a very large number of installers to QA and manage, again, not fun. Hit Install, time for another drink, maybe a piece of cake or a donut... on a half decent system this part of the install took under 10 minutes. Finally the installation of your IRM server is complete, click on finish and the next phase is to create the WebLogic domain and start configuring your server. Now move onto the next article in this guide... configuring your IRM server ready to seal your first document.

    Read the article

  • Begin the Clone Wars Have!

    - by Antony Reynolds
    Creating a New Virtual Machine from an Existing Virtual Disk In previous posts I described how I set up an OEL6 machine under VirtualBox that can run an 11gR2 database and FMW 11.1.1.5.  That is great if you want the DB and FMW running in the same virtual image and it has served me well for some proof of concepts and also for some testing of different JVMs.  However I also wanted to run some testing of FMW with the database running on a separate physical machine.  So in this post I will show how to take a VirtualBox image and create a new image based on the disks from that original image. What are my Options? There is more than one way to skin a cat, or in this case to create two separate VMs that can run on different hardware.  Some of the options include: Create new virtual disk images for each new VM. Clone the existing disk images and point the new VM at the cloned images. Point the new VM at the existing snapshots. #1 is too much like hard work, install OEL twice, install a database again, install FMW again, run RCU again!  Life is too short! #2 is probably the safest way of doing things.  VirtualBox allows you to clone a disk image for use in a separate machine.  However this of course duplicates the disk and means that it is now occupying 3 times the space, once for the original disk and twice more for the two clones I would need. #3 is the most space efficient way of doing things.  It does mean however that I can only run the new “cloned” images if I have access to the original image because that is where the base snapshots reside.  However this is not a problem for me as long as I remember to keep all threee images together.  So this is the approach we will follow. Snapshot, What Snapshot? As we are going to create new virtual machines based on existing snapshots we need to figure out which snapshot to use.  We do this by opening the “Media Manager” from within VirtualBox and moving the mouse over the snapshot images until we find the snapshots we want – the snapshot name is identified in the “Attached to:” comment.  In my case I wanted the FMW installed snapshot because that had a database configured for FMW alongside the FMW software.  I made a note of the filename of that snapshot (actually I just noted the first 5 characters as that was all that was needed to uniquely identify the snapshot file). When we create the new machines we will point them at the snapshot filename we have just checked. Network or NotWork? Because we want the two new machines to communicate with each other when hosted in different physical machines we can’t use the default NAT networking mode without a lot of hassle.  But at the same time we need them to have fixed IP addresses relative to each other so that they can see each other whilst also being able to see the outside world. To achieve all these requirements I created two network adapters for each machine.  Adapter 1 was a standard NAT mapping.  This will allow each machine to get a dynamic IP address (10.0.2.15 by default) that can be used to access the external world through the VBox provided NAT gateway.  This is the same as the existing configuration. The second adapter I created as a bridged adapter.  This gives the virtual machine direct access to the host network card and by using fixed IP addresses each machine can see the other.  It is important to choose fixed IP addresses that are not routable across your internal network so you don’t get any clashes with other machines on your network.  Of course you could always get proper fixed IP addresses from your network people, but I have serveral people using my images and as long as I don’t have two instances of the same VM on the same network segment this is easier and avoids reconfiguring the network every time someone wants a copy of my VM.  If it is available I would suggest using the 10.0.3.* network as 10.0.2.* is the default NAT network.  You can check availability by pinging 10.0.3.1 and 10.0.3.2 from your host machine.  If it times out then you are probably safe to use that. Creating the New VMs Now that I had collected the data that I needed I went ahead and created the new VMs. When asked for a “Boot Hard Disk” I used the “Choose a virtual hard disk file…” link to find the snapshot I had previously selected and set that to be the existing hard disk.  I chose the previously existing SOA 11.1.1.5 install for both the new DB and FMW machines because that snapshot had the database with the RCU completed that I wanted for my DB machine and it had the SOA software installed which I wanted for my FMW machine. After the initial creation of the virtual machine go into the network setting section and enable a second adapter which will be bridged.  Make a note of the MAC addresses (the last four digits should be sufficient) of the two adapters so that you can later set the bridged adapter to use fixed IP and the NAT adapter to use DHCP. We are now ready to start the VMs and reconfigure Linux. Reconfiguring Linux Because I now have two new machines I need to change their network configuration.  In particular I need to change the hostname, update the hosts file and change the network settings. Changing the Hostname I renamed both hosts by running the hostname command as root: hostname vboxfmw.oracle.com I also edited the /etc/sysconfig file and set the correct hostname in there. HOSTNAME=vboxfmw.oracle.com Changing the Network Settings I needed to change the network configuration to give the bridged network a fixed IP address.  I first explicitly set the MAC addresses of the two adapters, because the order of the virtual adapters in the VirtualBox Manager is not necessarily the same as the order of the adapters in the guest OS.  So I went in to the System->Preferences->Network Connections screen and explicitly set the “Device MAC address” for the two adapters. Having correctly mapped the Linux adapters to the VirtualBox adapters I then set the Bridged adapter to use fixed IP addressing rather than DHCP.  There is no need for additional routing or default gateways because we expect the two machine to be on the same LAN segment. Updating the Hosts File Having renamed the machines and reconfigured the network I then updated the /etc/hosts file to refer to the new machine name add a new line to the hosts file to provide an additional IP address for my server (the new fixed IP address) add a new line for the fixed IP address of the other virtual machine 10.0.3.101      vboxdb.oracle.com       vboxdb  # Added by NetworkManager 10.0.2.15       vboxdb.oracle.com       vboxdb  # Added by NetworkManager 10.0.3.102      vboxfmw.oracle.com      vboxfmw # Added by NetworkManager 127.0.0.1       localhost.localdomain   localhost ::1     vboxdb.oracle.com       vboxdb  localhost6.localdomain6 localhost6 To make sure everything takes effect I restarted the server. Reconfiguring the Database on the DB Machine Because we changed the hostname the listener and the EM console no longer start so I need to modify the listener.ora to use the new hostname and I also need to rebuild the EM configuration because it also relies on the hostname. I edited the $ORACLE_HOME/network/admin/listener.ora and changed the listening address to the new hostname:       (ADDRESS = (PROTOCOL = TCP)(HOST = vboxdb.oracle.com)(PORT = 1521)) After changing the listener.ora I was able to start the listener using: lsnrctl start I also had to reconfigure the EM database control.  I first deconfigured it using the command: emca -deconfig dbcontrol db -repos drop This drops the repository and removes any existing registered dbcontrols. I then re-configured it using the following command: emca -config dbcontrol db -repos create This creates the EM repository and then configures and starts dbcontrol. Now my database machine is ready so I can close it down and take a snapshot. Disabling the Database on the FMW Machine I set up the database to start automatically by creating a service called “dbora”.  On the FMW machine I do not need the database running so I can prevent it auto-starting by running the following command: chkconfig –del dbora Note that because I am using a snapshot it is not a waste of disk space to have the DB installed but not used.  As long as I don’t run it, it won’t cost me anything. I can now close the FMW machine down and take a snapshot. Creating a New Domain The FMW machine is now ready to create a new domain.  When creating the domain I can point it at the second machine which is running the database.  I can potentially run these machines on two separate physical machines as long as I have the original virtual machine available to both of the physical machines. Gotchas in Snapshotting VirtualBox does not support the concept of linked machines in a network like some virtualization technologies so when creating a snapshot it is a good idea to shut both VMs down and then take a snapshot on both of them.  This is because we want to keep the database in sync with the middleware.  One way to make sure that this happens would be to place all the domain configuration files on the database server via an NFS share, this would mean that all we would need to snapshot would be the database machine because that would hold all the state and configuration. The Sky’s the Limit We have covered a simple case of having just two machines.  I have a more complicated configuration in which two machine run a RAC database off the same base OS image, and two more machines run a SOA cluster based on the same OS image.  Just remember what machine holds state and what are the consequences of taking a snapshot.

    Read the article

  • Oracle RDBMS Server 11gR2 Pre-Install RPM for Oracle Linux 6 has been released

    - by Lenz Grimmer
    Now that the certification of the Oracle Database 11g R2 with Oracle Linux 6 and the Unbreakable Enterprise Kernel has been announced, we are glad to announce the availability of oracle-rdbms-server-11gR2-preinstall, the Oracle RDBMS Server 11gR2 Pre-install RPM package (formerly known as oracle-validated). Designed specifically for Oracle Linux 6, this RPM aids in the installation of the Oracle Database. In order to install the Oracle Database 11g R2 on Oracle Linux 6, your system needs to meet a few prerequisites, as outlined in the Linux Installation Guides. Using the Oracle RDBMS Server 11gR2 Pre-install RPM, you can complete most of the pre-installation configuration tasks. which is now available from the Unbreakable Linux Network, or via the Oracle public yum repository. The pre-install package is available for x86_64 only. Specifically, the package: Causes the download and installation of various software packages and specific versions needed for database installation, with package dependencies resolved via yum Creates the user oracle and the groups oinstall and dba, which are the defaults used during database installation Modifies kernel parameters in /etc/sysctl.conf to change settings for shared memory, semaphores, the maximum number of file descriptors, and so on Sets hard and soft shell resource limits in /etc/security/limits.conf, such as the number of open files, the number of processes, and stack size to the minimum required based on the Oracle Database 11g Release 2 Server installation requirements Sets numa=off in the kernel boot parameters for x86_64 machines Please see the release announcement for further details and instructions. Also take a look at Ginny Henningsen's "How I Simplified Oracle Database Installation on Oracle Linux" article on the Oracle Technology Network for a general description on how to perform the installation of the Oracle Database on Oracle Linux. While the article refers to Oracle Linux 5 and the former "oracle-validated" package, the steps for Oracle Linux 6 are still very similar (we're looking into updating that article for Oracle Linux 6).

    Read the article

  • Become an Oracle Solaris 11 Certified Implementation Specialist!

    - by uwes
    Have you heard about one of the newest certifications from Oracle, the Oracle Solaris 11 Certified Implementation Specialist? If you already have a background in Oracle Solaris, have some previous UNIX knowledge, or are working with or for an Oracle Partner that’s pursuing Oracle Solaris 11 Specialization, then you may be interested in the many different ways to gain this highly valued industry certification. An Oracle Certified Implementation Specialist is recognized as capable of installing, configuring, and implementing Oracle Solaris 11 on enterprise class SPARC and x86 systems. This certification is highly valued by Oracle customers and partners alike, since you will have obtained an updated skill set on the newest and most powerful operating system release from Oracle which will set your company apart. If you’ve already achieved an industry certification in Solaris then you’re just a few steps away from becoming an Oracle Solaris 11 Certified Implementation Specialist. Also, if you’re new to Oracle Solaris, we have a path for you too. Listed below are some of the many options Oracle offers in delivering training the way you need it to help you achieve your goal of being recognized as an Oracle Solaris 11 Implementation Specialist. Which path best describes you? New to UNIX but want/need to achieve Certified status? Training Paths: Oracle Certified Associate, Oracle Solaris 11 System Administrator Exam: 1Z0-821 – Oracle Solaris 11 System Administration Certified on an earlier version of Solaris and want full Administration Certification? Recommended Training class: Transition to Oracle Solaris 11 Exam: 1Z0-820 – Transition to Oracle Solaris 11 Certified on an earlier version of Solaris and want the partner based Implementation Certification? Recommended Training Path: OPN Guided Learning Path Exam: 1Z0-580 – Oracle Solaris 11 Installation and Configuration Essentials Get Started Today!

    Read the article

  • How to make a system time-zone sensitive?

    - by Jerry Dodge
    I need to implement time zones in a very large and old Delphi system, where there's a central SQL Server database and possibly hundreds of client installations around the world in different time zones. The application already interacts with the database by only using the date/time of the database server. So, all the time stamps saved in both the database and on the client machines are the date/time of the database server when it happened, never the time of the client machine. So, when a client is about to display the date/time of something (such as a transaction) which is coming from this database, it needs to show the date/time converted to the local time zone. This is where I get lost. I would naturally assume there should be something in SQL to recognize the time zone and convert a DateTime field dynamically. I'm not sure if such a thing exists though. If so, that would be perfect, but if not, I need to figure out another way. This Delphi system (multiple projects) utilizes the SQL Server database using ADO components, VCL data-aware controls, and QuickReports (using data sources). So, there's many places where the data goes directly from the database query to rendering on the screen, without any code to actually put this data on the screen. In the end, I need to know when and how should I get the properly converted time? There must be a standard method for this, and I'm hoping SQL Server 2008 R2 has this covered...

    Read the article

  • ADF & ADF Mobile Bootcamps in UK, Austria, Spain, Switzerland

    - by JuergenKress
    You want to learn more about innovative features ADF and ADF mobile? You want to get answers how to build modern & mobile applications? Join our 2 days ADF & ADF mobile hands-on Bootcamp. UK Spain Switzerland Austria (one day class) Details Training Audience: Developers, Project Managers, Architects & ADF beginners Trainer: Mireille Duroussaud Language: English Cost: Free of charge, cancelation fee 50€ or no-show fee 2.000€ Note: Bootcamp is limited to 20 persons on first come first serve basis. Preparation:  Attend the free online training ADF 11g Presales Specialist. Follow-up  Pass the free online assessment ADF 11g Presales Specialist. Highlights of the Workshop Oracle Fusion Middleware Development Platform Developing Reusable Business Service Developing Rich Web User Interface and Portals Developing Mobile Apps for iOS and Android with Oracle ADF Mobile For details and registration please visit our registration page. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. BlogTwitterLinkedInMixForumWiki Technorati Tags: adf,adf training,education,training,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

    Read the article

  • How to make a legacy system time-zone sensitive?

    - by Jerry Dodge
    I need to implement time zones in a very large and old Delphi system, where there's a central SQL Server database and possibly hundreds of client installations around the world in different time zones. The application already interacts with the database by only using the date/time of the database server. So, all the time stamps saved in both the database and on the client machines are the date/time of the database server when it happened, never the time of the client machine. So, when a client is about to display the date/time of something (such as a transaction) which is coming from this database, it needs to show the date/time converted to the local time zone. This is where I get lost. I would naturally assume there should be something in SQL to recognize the time zone and convert a DateTime field dynamically. I'm not sure if such a thing exists though. If so, that would be perfect, but if not, I need to figure out another way. This Delphi system (multiple projects) utilizes the SQL Server database using ADO components, VCL data-aware controls, and QuickReports (using data sources). So, there's many places where the data goes directly from the database query to rendering on the screen, without any code to actually put this data on the screen. In the end, I need to know when and how should I get the properly converted time? What is the proper way to ensure that I handle Dates and Times correctly in a legacy application?

    Read the article

  • From The OU Classrooms...

    - by rajeshr
    No excuses for not doing this systematically, and I'm trying my best to break this bad habit of bulk uploads of class photographs and do it regularly instead. But for the time being, please forgive my laziness and live by my mass introduction of all fun loving, yet talented folks whom I met in the OU classrooms during the last three months or so through these picture essay that follow. It's unfortunate, I don't get to do this for my Live Virtual Classes for obvious reason,but let me take a moment to thank them all as well for choosing OU programs on various products. Thanks again to each one for memorable moments in the OU classrooms: Pillar Axiom MaxRep session at Bangkok. For detailed information on the OU course on Pillar Axiom Max Rep, access this page. Pillar Axiom SAN Administration Session at Bangkok. Know more about the product here. Details on the Pillar Axiom training program from Oracle University can be found here. Oracle Solaris ZFS Administration & Oracle Solaris Containers session at Hyderabad. Read more about ZFS here. Gain information on Solaris Containers by going here. Oracle University courses on Solaris 10 and its features can be viewed at this page. Oracle Solaris Cluster program at Hyderabad. Here's the OU landing page for the training programs on Oracle Solaris Cluster. Oracle Solaris 11 Administration Session at Bangalore. If you are interested to get trained on Solaris 11, get more details at this webpage. Sun Identity Manager Deployment Fundamentals session at Bangalore. The product is n.k.a Oracle Waveset IDM. Click here to get detailed description on this fabulous hands on training program. With Don Kawahigashi at Taipei for Pillar Axiom Storage training.

    Read the article

  • SOA &amp; Application Grid Specialization&ndash; Education Implementation Assessment - Step 4 of 6

    - by Jürgen Kress
      In our first step to become SOA Specialized & Application Grid Specialized we highlighted the OMM system to register your opportunities. In our second step we featured marketing activities to create your reference cases and run joint marketing campaigns. In the third step we focused on the competence center assessments SOA Sales assessment & SOA Pre-Sales assessment & Support assessment / Application Grid Sales assessment & Application Grid Pre-Sales assessment & Support assessment In the forth step we will focus on the education implementation assessment criteria: · Oracle Application Grid Certified Implementation Specialist · Oracle Service-Oriented Architecture Certified Implementation Specialist Bootcamp training steps (optional): Login to Oracle Partner Network (support for login contact Partner Business Centers) Attend a SOA or Application Grid bootcamp to learn the product hands-on Find a training close to your location in the local training calendar Pearsonvue Steps: Go to http://www.pearsonvue.com/Oracle/ ·Create a web account. (will take up to 24 hours) if you need your OPN Company ID (please contact Partner Business Centers) ·Register and attend the Oracle Service-Oriented Architecture Certified Implementation Specialist (1Z1-451) or Oracle Application Grid Certified Implementation Specialist  (1Z1-523) at a training center close to you. The Application Grid Specialized is in beta phase, therefore we give away free vouchers; please contact Jürgen Kress if you like to get one. ·Submit your successful exam If you need to get an Oracle Partner Network Account please contact our Partner Business Centers. For more information on Specialization please visit our OPN Specialized Webcast Series and become a member in our SOA Partner Community for registration please visit www.oracle.com/goto/ema/soa Jürgen Kress, SOA Partner Adoption EMEA Thanks for your efforts to become Specialized! Technorati Tags: soa specialization

    Read the article

  • Do you want to become an Oracle certified Expert in WebLogic & ADF?

    - by JuergenKress
    Hands-on Bootcamps Training Roadshows FY14 free hands-on training for community members ADF & ADF Mobile Bootcamps & WebLogic Bootcamps. For all WebLogic & ADF experts, we offer 100 free vouchers worth $195 to become an Oracle certified expert. To receive a WebLogic & ADF voucher please send an e-mail with the screenshot of your WebLogic Server 12c PreSales Specialist or ADF 11g PreSales Specialist certificate to [email protected] including your Name, Company, e-mail and Country with the e-mail subject free WebLogic & ADF voucher! Or attend a local free "Test-Fest". WebLogic ADF Pre-Sales assessment (free online test) Preparation: WebLogic 12c PreSales Specialist (OPN account required – need help?) ADF 11g PreSales Specialist (OPN account required – need help?) Implementation assessment Preparation: WebLogic 12c Implementation Specialist WebLogic Bootcamp training material (Community membership required) WebLogic Knowledge Zone Overview ADF 11g Implementation Specialist ADF 11g bootcamp training material (Community membership required) ADF Knowledge Zone Overview Free vouchers are reserved for partners from Europe, Middle East and Africa. Any other countries please contact your local partner manager! Vouchers are only valid until quarter end! WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: education,Specialization,Implementation Specialist,OPN,OOW,Oracle OpenWorld,WebLogic,WebLogic Community,Oracle,Jürgen Kress

    Read the article

  • Advantages of relational databases over VSAM, ISAM and hierarchical data stores

    - by llaszews
    When migrating companies from legacy environments to the cloud, invariably you run into older hierarchical, flat file, VSAM, ISAM and other legacy data stores. There are many advantages to moving these databases into a relational database structure. The most important which is that most cloud providers run on relational database models. AWS, for example, supports Oracle, SQL Server, and MySQL. The top three 'other reasons' for moving to a relational database are: 1. Data Access – Thousands of database access tools from query creation to business intelligence. 2. Management and monitoring – Hundreds of tools for management and monitoring of the database. 3. Leverage all the free tools from relational database vendors. Free Oracle database tools include: -Application Express – WYSIWIG browse based application development and deployment. -SQL Developer – SQL and PL/SQL development. Database object maintenance. What is interesting is that Big Data NoSQL databases and XML databases are taking us back to the days of VSAM (key value databases) with NoSQL and IMS (hierarchical) with XML databases?

    Read the article

  • Using Queries with Coherence Read-Through Caches

    - by jpurdy
    Applications that rely on partial caches of databases, and use read-through to maintain those caches, have some trade-offs if queries are required. Coherence does not support push-down queries, so queries will apply only to data that currently exists in the cache. This is technically consistent with "read committed" semantics, but the potential absence of data may make the results so unintuitive as to be useless for most use cases (depending on how much of the database is held in cache). Alternatively, the application itself may manually "push down" queries to the database, either retrieving results equivalent to querying the cache directly, or may query the database for a key set and read the values from the cache (relying on read-through to handle any missing values). Obviously, if the result set is too large, reading through the cache may cause significant thrashing. It's also worth pointing out that if the cache is asynchronously synchronized with the database (perhaps via database change listener), that an application may commit a transaction to the database, then generate a key set from the database via a query, then read cache entries through the cache, possibly resulting in a race condition where the application sees older data than it had previously committed. In theory this is not problematic but in practice it is very unintuitive. For this reason it often makes sense to invalidate the cache when updating the database, forcing the next read-through to update the cache.

    Read the article

  • 2014?9???OTN?????????????&????

    - by OTN-J Master
    ????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????9??OTN????????JPOUG(Japan Oracle User Group)????JPOUG> SET EVENTS 20140907??????????????????????????????????????????ORACLE MASTER Bronze??????????????????????!????JPOUG> SET EVENTS 201409072014?9?7?(?)13:00~17:00 @ ?????????????????? (??????)Japan Oracle User Group(JPOUG)?????????????Oracle Database?MySQL????????IT???????????????????????????????????????????????????????????????????????????????????????? ~Recovery Manager(RMAN)??????! ~(??????2??????)9?17?(?)15:30 ~17:00 @ ?????????????????(???)9?17?(?)18:30~20:00 @ ?????????????????(???)Oracle?Backup/Recovery ?????????? Recovery Manager(RMAN)?Backup ????????????????????????????????????????????????????????????RMAN??????????????????Oracle Database 12c ? Recovery Manager ????????????????????????????????Oracle Database Appliance???9?18?(?)15:30 ~17:30 @ ??????????(??????)??????????????????????????????????·?????Oracle Database Appliance??????????????????????????????????????????????????????????????????·?????Oracle Database Appliance ?????????????????????????????????? Java EE 9?24?(?)18:30 ~ 20:00 @ ??????????(??????)???? Java EE ???????????Java EE ????? ?? JavaServer Faces (JSF) ? ????????? Contexts and Dependency Injection (CDI) ?? Java EE 6 ?????????Web ????????????????????????????????ORACLE MASTER Bronze Oracle Database 12c ?????????????? 9?30?(?)14:30 ~ 16:30 @ ??????????(??????)???24????????????? ORACLE MASTER???????????????????????ORACLE MASTER Bronze Oracle Database 12c????????????Bronze ???????????????(????????)- ORACLE MASTER Oracle Database 12c ????-??????:ORACLE MASTER Bronze?12c SQL?? [12c SQL]?-??????:ORACLE MASTER Bronze?Bronze DBA 12c?ORACLE MASTER??????????????????ORACLE MASTER????????12c?????????????????????????

    Read the article

  • How to create an Entity Framework model from an existing SQLite database in Visual Studio 2008?

    - by splattne
    I've installed the System.Data.SQLite ADO.NET Provider from http://sqlite.phxsoftware.com/. I can connect to the database from within Visual Studio, I can open table schemas, views etc. I'd like to use an existing SQLite database to create an Entity Framework model in Visual Studio 2008. When I try to create a new ADO.NET Entity Data Model (.edmx) file using the wizard, the existing SQLite connection is not in the list though. Also, it's not possible to create a SQLite connection because there is no provider for SQLite. It only lists SQL Server, SQL Server file and SQL Server Compact 3.5. Any idea how to solve this problem?

    Read the article

  • How to read time phased data from Project Server 2007 directly from Project Server Database ?

    - by Nikhil Vaghela
    I am working on a custom web part for Project Web Access, for Project Server 2007. We are so far using PSI web services only to read and write data from and to Project Server 2007 databases. But there is a signinficant performance issue when you retrieve time phased data through Statusing web service, it is basically an expensive call for querying time phased data for each tasks. I want to access Time phased data entered by user for each tasks by directly hitting the Project Server Database. [ I do not want the solution suggested at this link : http://blogs.msdn.com/project_programmability/archive/2007/05/24/getting-at-the-task-time-phased-data.aspx as it reads data from reporting database which gets entry only after the project is published. ] I want to get time phased data as soon as user enters it. Any idea ? Thanks.

    Read the article

  • ASPNETDB and ASPSTATE database. How to change the connectionstrings?

    - by George
    I have two ASP-specific SQL Server databases 1) ASPState - To store session state 2) ASPNETDB - To store Security/Role stuff. In my web.config, I am specifying the connection string used to identify the location of the APState database: <sessionState mode="SQLServer" sqlConnectionString="server=(local)\sql2008b;uid=sa;pwd=iainttelling;" timeout="120"/> Where is the conenction string specified for the ASPNETDB database? I am trying to point it to a db on a remote server. I have a feeling it is somewhere in IIS orthe Machine Config. I'd like to add it to my WEB.CONFIG Could someone help me to do this?

    Read the article

  • How to connect an existing wizard generated data set to a different server(same database) at run tim

    - by Kiril
    Hello, I am coding a simple space empire management game in Visual C# 2008, which relies on connecting to a remote SQL server database to get/store data. I would like the user to be able to connect to a user-specified SQL server from the login screen(he specifies IP address, port, database name, ID, password and presses "connect" button). However, I found out that the Dataset connection string property is read only and cannot be changed. Is there any way to guide the wizard-generated DataSet to a user-specified server at run time? Thanks in advance.

    Read the article

< Previous Page | 362 363 364 365 366 367 368 369 370 371 372 373  | Next Page >