Search Results

Search found 11993 results on 480 pages for 'define syntax'.

Page 366/480 | < Previous Page | 362 363 364 365 366 367 368 369 370 371 372 373  | Next Page >

• 10 Steps to access Oracle stored procedures from Crystal Reports

  Requirements to access Oracle stored procedures from CR The following requirements must be met in order for CR to access an Oracle stored procedure: 1. You must create a package that defines the REF CURSOR. This REF CURSOR must be strongly bound to a static pre-defined structure (see Strongly Bound REF CURSORs vs Weakly Bound REF CURSORs). This package must be created separately and before the creation of the stored procedure. NOTE Crystal Reports 9 native connections will support Oracle stored procedures created within packages as well as Oracle stored procedures referencing weakly bound REF CURSORs. Crystal Reports 8.5 native connections will support Oracle stored procedures referencing weakly bound REF CURSORs. 2. The procedure must have a parameter that is a REF CURSOR type. This is because CR uses this parameter to access and define the result set that the stored procedure returns. 3. The REF CURSOR parameter must be defined as IN OUT (read/write mode). After the procedure has opened and assigned a query to the REF CURSOR, CR will perform a FETCH call for every row from the query's result. This is why the parameter must be defined as IN OUT. 4. Parameters can only be input (IN) parameters. CR is not designed to work with OUT parameters. 5. The REF CURSOR variable must be opened and assigned its query within the procedure. 6. The stored procedure can only return one record set. The structure of this record set must not change, based on parameters. 7. The stored procedure cannot call another stored procedure. 8. If using an ODBC driver, it must be the CR Oracle ODBC driver (installed by CR). Other Oracle ODBC drivers (installed by Microsoft or Oracle) may not function correctly. 9. If you are using the CR ODBC driver, you must ensure that in the ODBC Driver Configuration setup, under the Advanced Tab, the option 'Procedure Return Results' is checked ON. 10. If you are using the native Oracle driver and using hard-coded date selection within the procedure, the date selection must use either a string representation format of 'YYYY-DD-MM' (i.e. WHERE DATEFIELD = '1999-01-01') or the TO_DATE function with the same format specified (i.e. WHERE DATEFIELD = TO_DATE ('1999-01-01','YYYY-MM-DD'). For more information, refer to kbase article C2008023. 11. Most importantly, this stored procedure must execute successfully in Oracle's SQL*Plus utility. If all of these conditions are met, you must next ensure you are using the appropriate database driver. Please refer to the sections in this white paper for a list of acceptable database drivers. span.fullpost {display:none;}

  Read the article

• Persevering & Friday Night Big Ideas

  - by Oracle Accelerate for Midsize Companies

  by Jim Lein, Oracle Midsize Programs Every successful company, personal accomplishment, and philanthropic endeavor starts with one good idea. I have my best ideas on Friday evenings. The creative side of my brain is stimulated by end of week endorphins. Free thinking. Anything is possible. But, as my kids love to remind me, most of Dad's Friday Night Big Ideas (FNBIs) fizzle on the drawing board. Usually there's one barrier blocking the way that seems insurmountable by noon on Monday. For example, trekking the 486 mile Colorado Trail is on my bucket list. Since I have a job, I'll have to do it in bits and pieces--day hikes, weekends, and a vacation week here and there. With my trick neck, backpacking is not an option. How to survive equip myself for overnight backcountry travel was that one seemingly insurmountable barrier.  Persevering Lewis and Clark wouldn't have given up so I explored options and, as I blogged about back in December, I had an FNBI to hire llamas to carry my load. Last weekend, that idea came to fruition. Early Saturday morning, I met up with Bill, the owner of Antero Llamas, for an overnight training expedition along segment 14 of the Colorado Trail with a string of twelve llamas. It was a crash course on learning how to saddle, load, pasture, and mediate squabbles. Amazingly, we left the trailhead with me, the complete novice, at the lead. Instead of trying to impart three decades of knowledge on me in two days, Bill taught me two things: "Go With the Flow" and "Plan B". It worked. There were times I would be lost in thought for long stretches of time until one snort would remind me that I had a string of twelve llamas trailing behind. A funny thing happened along the trail... Up until last Saturday, my plan had been to trek all 28 segments of the trail east to west and sequentially. Out of some self-imposed sense of decorum. That plan presented myriad logistical challenges such as impassable snow pack on the Continental Divide when segment 6 is up next. On Sunday, as we trekked along the base of 14,000 ft peaks, I applied Bill's llama handling philosophy to my quest and came up with a much more realistic and enjoyable strategy for achieving my goal.  Seize opportunities to hike regardless of order. Define my own segments. Go west to east for awhile if it makes more sense. Let the llamas carry more creature comforts. Chill out.  I will still set foot on all 486 miles of the trail. Technically, the end result will be the same.And I and my traveling companions--human and camelid--will enjoy the journey more. Much more. Got Big Ideas of Your Own? Check out Tongal. This growing Oracle customer works with brands to crowd source fantastic ideas for promoting products and services. Your great idea could earn you cash.  Looking for more news and information about Oracle Solutions for Midsize Companies? Read the latest Oracle for Midsize Companies Newsletter Sign-up to receive the latest communications from Oracle’s industry leaders and experts Jim Lein I evangelize Oracle's enterprise solutions for growing midsize companies. I recently celebrated 15 years with Oracle, having joined JD Edwards in 1999. I'm based in Evergreen, Colorado and love relating stories about creativity and innovation whether they be about software, live music, or the mountains. The views expressed here are my own, and not necessarily those of Oracle.

  Read the article

• New R Interface to Oracle Data Mining Available for Download

  - by charlie.berger

    The R Interface to Oracle Data Mining ( R-ODM) allows R users to access the power of Oracle Data Mining's in-database functions using the familiar R syntax. R-ODM provides a powerful environment for prototyping data analysis and data mining methodologies. R-ODM is especially useful for: Quick prototyping of vertical or domain-based applications where the Oracle Database supports the application Scripting of "production" data mining methodologies Customizing graphics of ODM data mining results (examples: classification, regression, anomaly detection) The R-ODM interface allows R users to mine data using Oracle Data Mining from the R programming environment. It consists of a set of function wrappers written in source R language that pass data and parameters from the R environment to the Oracle RDBMS enterprise edition as standard user PL/SQL queries via an ODBC interface. The R-ODM interface code is a thin layer of logic and SQL that calls through an ODBC interface. R-ODM does not use or expose any Oracle product code as it is completely an external interface and not part of any Oracle product. R-ODM is similar to the example scripts (e.g., the PL/SQL demo code) that illustrates the use of Oracle Data Mining, for example, how to create Data Mining models, pass arguments, retrieve results etc. R-ODM is packaged as a standard R source package and is distributed freely as part of the R environment's Comprehensive R Archive Network (CRAN). For information about the R environment, R packages and CRAN, see www.r-project.org. R-ODM is particularly intended for data analysts and statisticians familiar with R but not necessarily familiar with the Oracle database environment or PL/SQL. It is a convenient environment to rapidly experiment and prototype Data Mining models and applications. Data Mining models prototyped in the R environment can easily be deployed in their final form in the database environment, just like any other standard Oracle Data Mining model. What is R? R is a system for statistical computation and graphics. It consists of a language plus a run-time environment with graphics, a debugger, access to certain system functions, and the ability to run programs stored in script files. The design of R has been heavily influenced by two existing languages: Becker, Chambers & Wilks' S and Sussman's Scheme. Whereas the resulting language is very similar in appearance to S, the underlying implementation and semantics are derived from Scheme. R was initially written by Ross Ihaka and Robert Gentleman at the Department of Statistics of the University of Auckland in Auckland, New Zealand. Since mid-1997 there has been a core group (the "R Core Team") who can modify the R source code archive. Besides this core group many R users have contributed application code as represented in the near 1,500 publicly-available packages in the CRAN archive (which has shown exponential growth since 2001; R News Volume 8/2, October 2008). Today the R community is a vibrant and growing group of dozens of thousands of users worldwide. It is free software distributed under a GNU-style copyleft, and an official part of the GNU project ("GNU S"). Resources: R website / CRAN R-ODM

  Read the article

• Writing an unthemed view while still using Orchard shapes and helpers

  - by Bertrand Le Roy

  This quick tip will show how you can write a custom view for a custom controller action in Orchard that does not use the current theme, but that still retains the ability to use shapes, as well as zones, Script and Style helpers. The controller action, first, needs to opt out of theming: [Themed(false)] public ActionResult Index() {} .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Then, we still want to use a shape as the view model, because Clay is so awesome: private readonly dynamic _shapeFactory; public MyController(IShapeFactory shapeFactory) { _shapeFactory = shapeFactory; } [Themed(false)] public ActionResult Index() { return View(_shapeFactory.MyShapeName( Foo: 42, Bar: "baz" )); } As you can see, we injected a shape factory, and that enables us to build our shape from our action and inject that into the view as the model. Finally, in the view (that would in Views/MyController/Index.cshtml here), just use helpers as usual. The only gotcha is that you need to use “Layout” in order to declare zones, and that two of those zones, Head and Tail, are mandatory for the top and bottom scripts and stylesheets to be injected properly. Names are important here. @{ Style.Include("somestylesheet.css"); Script.Require("jQuery"); Script.Include("somescript.js"); using(Script.Foot()) { <script type="text/javascript"> $(function () { // Do stuff }) </script> } } <!DOCTYPE html> <html> <head> <title>My unthemed page</title> @Display(Layout.Head) </head> <body> <h1>My unthemed page</h1> <div>@Model.Foo is the answer.</div> </body> @Display(Layout.Tail) </html> Note that if you define your own zones using @Display(Layout.SomeZone) in your view, you can perfectly well send additional shapes to them from your controller action, if you injected an instance of IWorkContextAccessor: _workContextAccessor.GetContext().Layout .SomeZone.Add(_shapeFactory.SomeOtherShape()); Of course, you’ll need to write a SomeOtherShape.cshtml template for that shape but I think this is pretty neat.

  Read the article

• CacheAdapter 2.4 – Bug fixes and minor functional update

  - by Glav

  Note: If you are unfamiliar with the CacheAdapter library and what it does, you can read all about its awesome ability to utilise memory, Asp.Net Web, Windows Azure AppFabric and memcached caching implementations via a single unified, simple to use API from here and here.. The CacheAdapter library is receiving an update to version 2.4 and is currently available on Nuget here. Update: The CacheAdapter has actualy just had a minor revision to 2.4.1. This significantly increases the performance and reliability in memcached scenario under more extreme loads. General to moderate usage wont see any noticeable difference though. Bugs This latest version fixes a big that is only present in the memcached implementation and is only seen in rare, intermittent times (making i particularly hard to find). The bug is where a cache node would be removed from the farm when errors in deserialization of cached objects would occur due to serialised data not being read from the stream in entirety. The code also contains enhancements to better surface serialization exceptions to aid in the debugging process. This is also specifically targeted at the memcached implementation. This is important when moving from something like memory or Asp.Web caching mechanisms to memcached where the serialization rules are not as lenient. There are a few other minor bug fixes, code cleanup and a little refactoring. Minor feature addition In addition to this bug fix, many people have asked for a single setting to either enable or disable the cache.In this version, you can disable the cache by setting the IsCacheEnabled flag to false in the application configuration file. Something like the example below: <Glav.CacheAdapter.MainConfig> <setting name="CacheToUse" serializeAs="String"> <value>memcached</value> </setting> <setting name="DistributedCacheServers" serializeAs="String"> <value>localhost:11211</value> </setting> <setting name="IsCacheEnabled" serializeAs="String"> <value>False</value> </setting> </Glav.CacheAdapter.MainConfig> Your reasons to use this feature may vary (perhaps some performance testing or problem diagnosis). At any rate, disabling the cache will cause every attempt to retrieve data from the cache, resulting in a cache miss and returning null. If you are using the ICacheProvider with the delegate/Func<T> syntax to populate the cache, this delegate method will get executed every single time. For example, when the cache is disabled, the following delegate/Func<T> code will be executed every time: var data1 = cacheProvider.Get<SomeData>("cache-key", DateTime.Now.AddHours(1), () => { // With the cache disabled, this data access code is executed every attempt to // get this data via the CacheProvider. var someData = new SomeData() { SomeText = "cache example1", SomeNumber = 1 }; return someData; }); One final note: If you access the cache directly via the ICache instance, instead of the higher level ICacheProvider API, you bypass this setting and still access the underlying cache implementation. Only the ICacheProvider instance observes the IsCacheEnabled setting. Thanks to those individuals who have used this library and provided feedback. Ifyou have any suggestions or ideas, please submit them to the issue register on bitbucket (which is where you can grab all the source code from too)

  Read the article

• How to Open Any Folder as a Project in the NetBeans Platform

  - by Geertjan

  Typically, as described in the NetBeans Project Type Tutorial, you'll define a project type based on the presence of a file (e.g., "project.xml" or "customer.txt" or something like that) in a folder. I.e., if the file is there, then its parent, i.e., the folder that contains the file, is a project and should be opened in your application. However, in some scenarios (as with the HTML5 project type introduced in NetBeans IDE 7.3), the user should be able to open absolutely any folder at all into the application. How to create a project type that is that liberal? Here you go, the only condition that needs to be true is that the selected item in the "Open Project" dialog is a folder, as defined in the "isProject" method below. Nothing else. That's it. If you select a folder, it will be opened in your application, displaying absolutely everything as-is (since below there's no ProjectLogicalView defined): import java.beans.PropertyChangeListener; import java.io.IOException; import javax.swing.Icon; import org.netbeans.api.project.Project; import org.netbeans.api.project.ProjectInformation; import org.netbeans.spi.project.ProjectFactory; import org.netbeans.spi.project.ProjectState; import org.openide.filesystems.FileObject; import org.openide.loaders.DataFolder; import org.openide.loaders.DataObjectNotFoundException; import org.openide.nodes.FilterNode; import org.openide.util.Exceptions; import org.openide.util.ImageUtilities; import org.openide.util.Lookup; import org.openide.util.lookup.Lookups; import org.openide.util.lookup.ServiceProvider; @ServiceProvider(service = ProjectFactory.class) public class FolderProjectFactory implements ProjectFactory { @Override public boolean isProject(FileObject projectDirectory) { return DataFolder.findFolder(projectDirectory) != null; } @Override public Project loadProject(FileObject dir, ProjectState state) throws IOException { return isProject(dir) ? new FolderProject(dir) : null; } @Override public void saveProject(Project prjct) throws IOException, ClassCastException { // leave unimplemented for the moment } private class FolderProject implements Project { private final FileObject projectDir; private Lookup lkp; private FolderProject(FileObject dir) { this.projectDir = dir; } @Override public FileObject getProjectDirectory() { return projectDir; } @Override public Lookup getLookup() { if (lkp == null) { lkp = Lookups.fixed(new Object[]{ new Info(), }); } return lkp; } private final class Info implements ProjectInformation { @Override public Icon getIcon() { Icon icon = null; try { icon = ImageUtilities.image2Icon( new FilterNode(DataFolder.find( getProjectDirectory()).getNodeDelegate()).getIcon(1)); } catch (DataObjectNotFoundException ex) { Exceptions.printStackTrace(ex); } return icon; } @Override public String getName() { return getProjectDirectory().getName(); } @Override public String getDisplayName() { return getName(); } @Override public void addPropertyChangeListener(PropertyChangeListener pcl) { //do nothing, won't change } @Override public void removePropertyChangeListener(PropertyChangeListener pcl) { //do nothing, won't change } @Override public Project getProject() { return FolderProject.this; } } } } Even the ProjectInformation implementation really isn't needed at all, since it provides nothing more than the icon in the "Open Project" dialog, the rest (i.e., the display name in the "Open Project" dialog) is provided by default regardless of whether you have a ProjectInformation implementation or not.

  Read the article

• Undefined fireball movement behavior

  - by optimisez

  Demonstration video I try to do after the player shoot 10 times of fireball, then delete all the fireball objects and recreate a 10 new set of fireball objects. I did it but there is a weird bug happens that sometimes the fireball will come out from top and move to the right after shooting a few times. All the 10 fireballs should follow the player all the time and all the fireball should come out from player even after a new set of fireballs is recreated. Any ideas to fix it? Variables typedef struct gameObject{ float X; float Y; int length; int height; bool action; }; // Fireball #define FIREBALL_NUM 10 LPDIRECT3DTEXTURE9 fireball = NULL; RECT fireballRect; gameObject *fireballDest = new gameObject[FIREBALL_NUM]; int iFireBallAnimation; int fireballCount = 0; Set up Fireball void setUpFireBall() { // Initialize destination rectangle, rectangle height and length for (int i = 0; i < FIREBALL_NUM; i++) { fireballDest[i].X = 0; fireballDest[i].Y = 0; fireballDest[i].length = fireballRect.right - fireballRect.left; fireballDest[i].height = fireballRect.bottom - fireballRect.top; } iFireBallAnimation = fireballRect.right - fireballRect.left; // Initialize boolean for (int i = 0; i < FIREBALL_NUM; i++) { fireballDest[i].action = false; } } Initialize fireball void initFireball() { hr = D3DXCreateTextureFromFileEx(d3dDevice, "fireball.png", 512, 512, D3DX_DEFAULT, NULL, D3DFMT_A8R8G8B8, D3DPOOL_MANAGED, D3DX_DEFAULT, D3DX_DEFAULT, D3DCOLOR_XRGB(255, 255, 0), NULL, NULL, &fireball); // Initialize source rectangle fireballRect.left = 0; fireballRect.top = 256; fireballRect.right = 64; fireballRect.bottom = 320; setUpFireBall(); } Update fireball void update() { updateAnimation(); updateAI(); updatePhysics(); updateGameState(); } void updatePhysics() { motion(); collison(); } void motion() { playerMove(); playerJump(); playerGravity(); shootFireball(); fireballFollowPlayer(); } void shootFireball() { if (keyArr['Z']) fireballDest[fireballCount].action = true; if (fireballDest[fireballCount].action) { fireballDest[fireballCount].X += 10; if (fireballDest[fireballCount].X > 800) fireballCount++; } } void fireballFollowPlayer() { for (int i = 0; i < FIREBALL_NUM; i++) { if (fireballDest[i].action == false) { fireballDest[i].X = playerDest.X - 30; fireballDest[i].Y = playerDest.Y - 14; } } } void updateGameState() { // When no more fireball left, rearm fireball if (fireballCount == FIREBALL_NUM) { delete[] fireballDest; fireballDest = new gameObject[10]; fireballCount = 0; setUpFireBall(); } } Render fireball void renderFireball() { for (int i = 0; i < FIREBALL_NUM; i++) { if (fireballDest[i].action) sprite->Draw(fireball, &fireballRect, NULL, &D3DXVECTOR3(fireballDest[i].X, fireballDest[i].Y, 0), D3DCOLOR_XRGB(255,255, 255)); } }

  Read the article

• Workflow versioning

  - by Nitra

  I believe I have a fundamental misunderstanding when it comes to workflow engines which I would appreciate if you could help me sort out. I'm not sure if my misunderstanding is specific to the workflow engine I'm using, or if it's a general misunderstanding. I happen to use Windows Workflow Foundation (WWF). TLDR-version WWF allows you to implement business processes in long-running workflows (think months or even years). When started, the workflows can't be changed. But what business process can't change at any time? And if a business process changes, wouldn't you want your software to reflect this change for already started 'instances' of the business process? What am I missing? Background In WWF you define a workflow by combining a set of activites. There are different types of activities - some of them are for flow control, such as the IfElseActivity and the WhileActivty while others allows you to perform actual tasks, such as the CodeActivity wich allows you to run .NET code and the InvokeWebServiceActivity which allows you to call web services. The activites are combined to a workflow using a visual designer. You pretty much drag-and-drop activities from a toolbox to a designer area and connect the activites to each other. The workflow and activities have input paramters, output parameters and variables. We have a single workflow which sometimes runs in a matter of a few days, but it may run for 5-6 months. WWF takes care of persisting the workflow state (what activity are we currently executing, what are the variable values and so on). So far I think WWF makes sense. Some people will prefer to implement a software representation of a business process using a visual designer over writing all of it in code. So what's the issue then? What I don't really get is the following: WWF is designed to take care of long-running workflows. But at the same time, WWF has no built-in functionality which allows you to modify the running workflows. So if you model a business process using a workflow and run that for 6 months, you better hope that the business process does not change. Because if it do, you'll have to have multiple versions of the workflow executing at the same time. This seems like a fundamental design mistake to me, but at the same time it seems more likely that I've misunderstood something. For us, this has had some real-world effects: We release new versions every month, but some workflows may run for a year. This means that we have several versions of the workflow running in parallell, in other words several versions of the business logics. This is the same as having many differnt versions of your code running in production in the same system at the same time, which becomes a bit hard to understand for users. (depending on on whether they clicked a 'Start' button 9 or 10 months ago, the software will behave differently) Our workflow refers to different types of entities and since WWF now has persisted and serialized these we can't really refactor the entities since then existing workflows can't be resumed (deserialization will fail We've received some suggestions on how to handle this When we create a new version of the workflow, cancel all running workflows and create new ones. But in our workflows there's a lot of manual work involved and if we start from scratch a lot of people has to re-do their work. Track what has been done in the workflow and when you create a new one skip activites which have already been executed. I feel that this alternative may work for simple workflows, but it becomes hairy to automatically figure out what activities to skip if there's major refactoring done to a workflow. When we create a new version of the workflow, upgrade old versions using the new WWF 4.5 functionality for upgrading workflows. But then we would have to skip using the visual designer and write code to inject activities in the right places in the workflow. According to MSDN, this upgrade functionality is only intended for minor bug fixes and not larger changes. What am I missing?

  Read the article

• Managing game state / 'what to update' within an XNA game 'screen'

  - by codinghands

  Note - having read through other GDev questions suggested when writing this question I'm confident this isn't a dupe. Of course, it's 3am and I'm likely wrong, so please mod as such if so. I'm trying to figure out how best to manage state within my game screens - please bare with me though! At the moment I'm using a heavily modified version of the fantastic game state management example on the XNA site available here. This is working perfectly for my 'Screens' - 'IntroScreen' with some shiny logos, 'TitleScreen' and a 'MenuScreen' stacked on top for the title and menu, 'PlayScreen' for the actual gameplay, etc. Each screen has the a bunch of sprites, and an 'Update' and 'Draw', managed by a 'ScreenManager'. In addition to the above, and as suggested as an answer to my other question here, most screens have a 'GameProcessQueue' class full of 'GameProcess'es which lets me do just about anything (animations, youbetcha!), in any order, in sequence or parallel. Why mention all this? When I talk about managing game state I'm thinking more for complex scenarios within a 'Screen'. 'TitleScreen', 'MenuScreen' and the like are all relatively simple. 'Play Screen' less so. How do people manage the different 'states' within the screen (or whatever you call it) that 'does' gameplay? (for me, the 'PlayScreen') I've thought about the following: Enum of different states in the Screen, 'activeState' enum-type variable, switching on the enum in the Screen Update() loop to determine what Screen Update 'sub'-function is called. I can see this getting hairy pretty fast though as screens get more complex and with the 'PlayScreen' becoming a behemoth mega-class. 'State' class with Update loop - a Screen can have any number of 'States', 1+ of which are 'active'. Screen update loop calls update on all active states. States themselves know which screen they belong to, and may even belong to a 'StateManager' which handles transitioning from one state to the next. Once a state is over it's removed from the ScreenState list. The Screen doesn't need a bunch of GameProcessQueues, each State has its own. Abstract Screen further to be more flexible - I can see the similarities between what I've got (game 'Screens' handled by a ScreenManager) and what I want (states within a screen, and a mechanism to manage them). However at the moment I see 'Screens' as high level and very distinct ('PlayScreen' with baddies != 'MenuScreen' with 4 words and event handlers), where as my proposed 'States' are more intrinsically tied to a specific screen with complex requirements. I think. This is for a turn-based board game, so it's easier to define things as a discrete series of steps (IntroAnimation - P1Turn - P2Turn - P1Turn ... - GameOver - .... Obviously with an open-world RPG things are very different, but any advice in this scenario is appreciated. If I'm just going OOP-crazy please say so. Similarly I'm concious there's a huge amount on this site re: state management. But as my first 'serious' game after a couple of false starts I'd like to get this right, and would rather be harassed and modded down than never ask :)

  Read the article

• Process Is The New App by Leon Smiers

  - by JuergenKress

  Process-on-the-Fly #2 - Process is the New App The next generation of business process management and business rules management tools is so powerful that it actually can be seen as the successor to custom-built applications. Being able to define detailed process, flows, decision trees and business helps on both the business and IT side to create powerful, differentiating solutions that would have required extensive custom coding in the past. Now much of the definition can be done ‘on the fly,’ using visual models and (semi) natural language in the nearest proximity to the business. Over the years, ERP systems have been customized to enter organization-specific functionality into the ERP application. This leads to better support for the business, but at the same time involves higher costs for maintenance, high dependency on the personnel involved in this customization, long timelines to deliver change to the system and increased risk involved in upgrading the ERP system. However, the best of both worlds can be created by bringing back the functionality to out-of-the-box usage of the ERP system and at the same time introducing change and flexibility by means of externalized 'Process Apps' in direct connection with the ERP system. The ERP system (or legacy bespoke system, for that matter) is used as originally intended and designed, resulting in more predictable behavior of the system related to usage and performance, and clearly can be maintained in a more standardized and cost-effective way. The Prrocess App externalizes the needed functionality into a highly customizable application outside the ERP for which it is supported by rules engines, task inboxes and can be delivered to different channels. The reasons for needing Process Apps may include the following: The ERP system just doesn't deliver this functionality in a specific industry; the volatility of changing certain functionality is high; or an umbrella type of functionality across (ERP) silos is needed. An example of bringing all this together is around the hiring process for a new employee at a university. Oracle PeopleSoft HCM could be used as the HR system to store all employee details. In the hiring process, an authorization scheme is involved for getting the approval to create a contract for the employee-to-be. In the university world, this authorization scheme is complex and involves faculties/colleges (with different organizational structures) and cross-faculty organizational structures. Including such an authorization scheme into PeopleSoft would require a lot of customization. By adding a handle inside PeopleSoft towards an externalized authorization Process App, the execution of the authorization of the employee is done outside the ERP: in a tool that is aimed to deliver approval schemes via a worklist-type of application. The Process App here works as an add-on to the PeopleSoft system, but can also be extended to support the full lifecycle of the end-to-end hiring process with the possibility to involve multiple applications. The actual core functionality is kept in the supporting ERP systems, while at the same time the Process App acts as an umbrella function to control the end-to-end flow and give insight into the efficiency of the end-to-end process. How to get there? Read the complete article here. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Technorati Tags: Capgemini,Leon Smiers,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

  Read the article

• How to undo a changeset using tf.exe rollback

  - by Tarun Arora

  Technorati Tags: Team Foundation Server 2010,Team Foundation Utilities,TFS2010   Oh no! Did you just check in a changeset in to TFS and realized that you need to roll back the changeset because the changes were suppose to go in a different branch? Or did you just accidently merge a wrong changeset in your release branch? There are several ways to undo the damage, Manual: Yes, we all just hate this word but for the record you could manually rollback the changes. Get Specific version on the branch and chose the changeset prior to the one you checked in. After that check out all the files in the changeset and check them in. During the check in you will receive a conflict. At this point choose ‘Keep local changes’ in the conflict resolution window and check in the files. Automated: Yes, we just love it! TFS comes with a very powerful command line utility ‘tf.exe’ that gives you the ability to rollback the effects of one or more changesets to one or more version-controlled items. This command does not remove the changesets from an item's version history. Instead, this command creates in your workspace a set of pending changes that negate the effects of the changesets that you specify. Syntax tf rollback /toversion:VersionSpec ItemSpec [/recursive] [/lock:none|checkin|checkout] [/version:versionspec] [/keepmergehistory] [/login:username,[password]] [/noprompt] tf rollback /changeset:ChangesetFrom~ChangesetTo [ItemSpec] [/recursive] [/lock:none|checkin|checkout] [/version:VersionSpec] [/keepmergehistory] [/noprompt] [/login:username,[password]]   I’ll explain this with an example. Your workspace is at the location C:\myWorkspace You want to rollback changeset # 145621 C:\Workspace\MyBranch>tf.exe rollback /changeset:145621 /recursive How do i rollback/undo a series of changesets? You can also rollback a range of changesets by using the following C:\Workspace\MyBranch>tf.exe rollback /changeset:145601~145621 /recursive This will check out the files in the version control and you should be able to see them in the pending changes. Go on check them in to undo the specific changeset that you just rolled back. Do you completely want to get rid of the changeset from all future merges between the two branches? /KeepMergeHistory: This option has an effect only if one or more of the changesets that you are rolling back include a branch or merge change. Specify this option if you want future merges between the same source and the same target to exclude the changes that you are rolling back. Errors “If you get the message ‘Unable to determine the workspace.’ You may be able to correct this by running ‘tf worksapces /collection:TeamProjectCollectionUrl’” you are in the wrong directory. Make sure that you run the ‘tf rollback’ command from the directory of your workspace.   Status Exit Code Description 0 The operation rolled back all items successfully. 1 The operation rolled back at least one item successfully but could not roll back one or more items. 100 The operation could not roll back any items.   To use the command you must have the Read, Check Out, and Check In permissions set to Allow. So, have you been in a rollback undo situation before?   Share this post :

  Read the article

• The Evolution of Oracle Direct EMEA by John McGann

  - by user769227

  John is expanding his Dublin based team and is currently recruiting a Director with marketing and sales leadership experience: http://bit.ly/O8PyDF Should you wish to apply, please send your CV to [email protected] Hi, my name is John McGann and I am part of the Oracle Direct management team, based in Dublin.   Today I’m writing from the Oracle London City office, right in the heart of the financial district and up to very recently at the centre of a fantastic Olympic Games. The Olympics saw individuals and teams from across the globe competing to decide who is Citius, Altius, Fortius - “Faster, Higher, Stronger" There are lots of obvious parallels between the competitive world of the Olympics and the Business environments that many of us operate in, but there are also some interesting differences – especially in my area of responsibility within Oracle. We are of course constantly striving to be the best - the best solution on offer for our clients, bringing simplicity to their management, consumption and application of information technology, and the best provider when compared with our many niche competitors.   In Oracle and especially in Oracle Direct, a key aspect of how we achieve this is what sets us apart from the Olympians.  We have long ago eliminated geographic boundaries as a limitation to what we can achieve. We assemble the strongest individuals across multiple countries and bring them together in teams focussed on a single goal. One such team is the Oracle Direct Sales Programs team. In case you don’t know, Oracle Direct EMEA (Europe Middle East and Africa) is the inside sales division in Oracle and it is where I started my Oracle career.  I remember that my first role involved putting direct mail in envelopes.... things have moved on a bit since then – for me, for Oracle Direct and in how we interact with our customers. Today, the team of over 1000 people is located in the different Oracle Direct offices around Europe – the main ones are Malaga, Berlin, Prague and Dubai plus the headquarters in Dublin. We work in over 20 languages and are in constant contact with current and future Oracle customers, using the latest internet and telephone technologies to effectively communicate and collaborate with each other, our customers and prospects. One of my areas of responsibility within Oracle Direct is the Sales Programs team. This team of 25 people manages the planning and execution of demand generation, leading the process of finding new and incremental revenue within Oracle Direct. The Sales Programs Managers or ‘SPMs’ are embedded within each of the Oracle Direct sales teams, focussed on distinct geographies or product groups. The SPMs are virtual members of the regional sales management teams, and work closely with the sales and marketing teams to define and deliver demand generation activities. The customer contact elements of these activities are executed via the Oracle Direct Sales and Business Development/Lead Generation teams, to deliver the pipeline required to meet our revenue goals. Activities can range from pan-EMEA joint sales and marketing campaigns, to very localised niche campaigns. The campaigns might focus on particular segments of our existing customers, introducing elements of our evolving solution portfolio which customers may not be familiar with. The Sales Programs team also manages ‘Nurture’ activities to ensure that we develop potential business opportunities with contacts and organisations that do not have immediate requirements. Looking ahead, it is really important that we continue to evolve our ability to add value to our clients and reduce the physical limitations of our distance from them through the innovative application of technology. This enables us to enhance the customer buying experience and to enable the Inside Sales teams to manage ever more complex sales cycles from start to finish.  One of my expectations of my team is to actively drive innovation in how we leverage data to better understand our customers, and exploit emerging technologies to better communicate with them.   With the rate of innovation and acquisition within Oracle, we need to ensure that existing and potential customers are aware of all we have to offer that relates to their business goals.   We need to achieve this via a coherent communication and sales strategy to effectively target the right people using the most effective medium. This is another area where the Sales Programs team plays a key role.

  Read the article

• How to use correctly the comments in C/++

  - by Lucio

  I'm learning to program in C and in my stage, the best form to use correctly the comments is writing good comments from the beginning. As the comments are not just for that one understands better the code but others too, I want to know the views of all of you to reach a consensus. So what I want is that the most experienced users edit the following code as you please. (If it's unnecessary, delete it; If it's wrong, correct it; If needed, add more) Thus there'll be multiple answers with different syntax and the responses with the most votes will be taken as referring when commenting. The code to copy, paste and edit to your pleasure is: (And I remark again, just import the comments, not the code) /* This programs find 1 number in 1 file. The file is binary type and has integers in series. The number is integer type and it's entered from the keyboard. When finished the program, a poster will show the results: Saying if the number is in the file or not. */ #include <stdio.h> //FUNCTION 1 //Open file 'path' and closes it. void openf(char path[]) { int num; //Read from Keyboard a Number and it save it into 'num' var printf("Ready for read number.\n\nNumber --> "); fflush(stdin); scanf("%d",&num); //Open file 'path' in READ mode FILE *fvar; fvar=fopen(path,"rb"); //IF error happens when open file, exit of function if (fvar==NULL) { printf("ERROR while open file %s in read mode.",path); exit(1); } /*Verify the result of 'funct' function IF TRUE, 'num' it's in the file*/ if (funct(path,fvar,num)) printf("The number %d it is in the file %s.",num,path); else printf("The number %d it is not in the file %s.",num,path); fclose(fvar); } /*FUNCTION 2 It is a recursive function. Reads number by number until the file is empty or the number is found. Parameters received: 'path' -> Directory file 'fvar' -> Pointer file 'num' -> Number to compare */ int funct(char path[],FILE *fvar,int num) { int compare; //FALSE condition when the pointer reaches the end if (fread(&compare,sizeof(int),1,fvar)>0) /*TRUE condition when the number readed is iqual that 'num' ELSE will go to the function itself*/ if (compare!=num) funct(path,fvar,num); else return 1; else return 0; } int main(int argc, char **argv) { char path[30]="file.bin"; //Direction of the file to process openf(path); //Function with algorithm return 0; }

  Read the article

• WebLogic Server Performance and Tuning: Part II - Thread Management

  - by Gokhan Gungor

  WebLogic Server, like any other java application server, provides resources so that your applications use them to provide services. Unfortunately none of these resources are unlimited and they must be managed carefully. One of these resources is threads which are pooled to provide better throughput and performance along with the fast response time and to avoid deadlocks. Threads are execution points that WebLogic Server delivers its power and execute work. Managing threads is very important because it may affect the overall performance of the entire system. In previous releases of WebLogic Server 9.0 we had multiple execute queues and user defined thread pools. There were different queues for different type of work which had fixed number of execute threads.  Tuning of this thread pools and finding the proper number of threads was time consuming which required many trials. WebLogic Server 9.0 and the following releases use a single thread pool and a single priority-based execute queue. All type of work is executed in this single thread pool. Its size (thread count) is automatically decreased or increased (self-tuned). The new “self-tuning” system simplifies getting the proper number of threads and utilizing them.Work manager allows your applications to run concurrently in multiple threads. Work manager is a mechanism that allows you to manage and utilize threads and create rules/guidelines to follow when assigning requests to threads. We can set a scheduling guideline or priority a request with a work manager and then associate this work manager with one or more applications. At run-time, WebLogic Server uses these guidelines to assign pending work/requests to execution threads. The position of a request in the execute queue is determined by its priority. There is a default work manager that is provided. The default work manager should be sufficient for most applications. However there can be cases you want to change this default configuration. Your application(s) may be providing services that need mixture of fast response time and long running processes like batch updates. However wrong configuration of work managers can lead a performance penalty while expecting improvement.We can define/configure work managers at;•    Domain Level: config.xml•    Application Level: weblogic-application.xml •    Component Level: weblogic-ejb-jar.xml or weblogic.xml(For a specific web application use weblogic.xml)We can use the following predefined rules/constraints to manage the work;•    Fair Share Request Class: Specifies the average thread-use time required to process requests. The default is 50.•    Response Time Request Class: Specifies a response time goal in milliseconds.•    Context Request Class: Assigns request classes to requests based on context information.•    Min Threads Constraint: Limits the number of concurrent threads executing requests.•    Max Threads Constraint: Guarantees the number of threads the server will allocate to requests.•    Capacity Constraint: Causes the server to reject requests only when it has reached its capacity. Let’s create a work manager for our application for a long running work.Go to WebLogic console and select Environment | Work Managers from the domain structure tree. Click New button and select Work manager and click next. Enter the name for the work manager and click next. Then select the managed server instances(s) or clusters from available targets (the one that your long running application is deployed) and finish. Click on MyWorkManager, and open the Configuration tab and check Ignore Stuck Threads and save. This will prevent WebLogic to tread long running processes (that is taking more than a specified time) as stuck and enable to finish the process.

  Read the article

• Oracle Fusion Supply Chain Management (SCM) Designs May Improve End User Productivity

  - by Applications User Experience

  By Applications User Experience on March 10, 2011 Michele Molnar, Senior Usability Engineer, Applications User Experience The Challenge: The SCM User Experience team, in close collaboration with product management and strategy, completely redesigned the user experience for Oracle Fusion applications. One of the goals of this redesign was to increase end user productivity by applying design patterns and guidelines and incorporating findings from extensive usability research. But a question remained: How do we know that the Oracle Fusion designs will actually increase end user productivity? The Test: To answer this question, the SCM Usability Engineers compared Oracle Fusion designs to their corresponding existing Oracle applications using the workflow time analysis method. The workflow time analysis method breaks tasks into a sequence of operators. By applying standard time estimates for all of the operators in the task, an estimate of the overall task time can be calculated. The workflow time analysis method has been recently adopted by the Applications User Experience group for use in predicting end user productivity. Using this method, a design can be tested and refined as needed to improve productivity even before the design is coded. For the study, we selected some of our recent designs for Oracle Fusion Product Information Management (PIM). The designs encompassed tasks performed by Product Managers to create, manage, and define products for their organization. (See Figure 1 for an example.) In applying this method, the SCM Usability Engineers collaborated with Product Management to compare the new Oracle Fusion Applications designs against Oracle’s existing applications. Together, we performed the following activities: Identified the five most frequently performed tasks Created detailed task scenarios that provided the context for each task Conducted task walkthroughs Analyzed and documented the steps and flow required to complete each task Applied standard time estimates to the operators in each task to estimate the overall task completion time Figure 1. The interactions on each Oracle Fusion Product Information Management screen were documented, as indicated by the red highlighting. The task scenario and script provided the context for each task.  The Results: The workflow time analysis method predicted that the Oracle Fusion Applications designs would result in productivity gains in each task, ranging from 8% to 62%, with an overall productivity gain of 43%. All other factors being equal, the new designs should enable these tasks to be completed in about half the time it takes with existing Oracle Applications. Further analysis revealed that these performance gains would be achieved by reducing the number of clicks and screens needed to complete the tasks. Conclusions: Using the workflow time analysis method, we can expect the Oracle Fusion Applications redesign to succeed in improving end user productivity. The workflow time analysis method appears to be an effective and efficient tool for testing, refining, and retesting designs to optimize productivity. The workflow time analysis method does not replace usability testing with end users, but it can be used as an early predictor of design productivity even before designs are coded. We are planning to conduct usability tests later in the development cycle to compare actual end user data with the workflow time analysis results. Such results can potentially be used to validate the productivity improvement predictions. Used together, the workflow time analysis method and usability testing will enable us to continue creating, evaluating, and delivering Oracle Fusion designs that exceed the expectations of our end users, both in the quality of the user experience and in productivity. (For more information about studying productivity, refer to the Measuring User Productivity blog.)

  Read the article

• Why are you doing this? [closed]

  - by NIcholas Lawson

  I am working on a story that I am going to be querying to several magazines in my hometown about this work that is being done by the AXR group. This is a group of people who have networked online and are working on developing a higher level syntax structure than CSS and HTML currently offer. I am covering this is as a story because I see potential in this as a human interest story in cosmopolitan society. I have been asked by the group to pose this question to you and would appreciate any and all comments you would have on the following ... To AXR: So when does the internet become finished? At what point does a computer scientist say to himself ... my job here is finished ... the internet is complete? When is the internet ready to be more about the display of content than the uploading of new websites or computer tech? You are embarking on upon a sixty year project every day you work with this internet, what drives you? Why are you spending your hard earned hours working on the code to this computer? I spend thirty hours a week online because I love the writing and I know what would make the internet better ... ease of use ... i know it is difficult to program but I see some very elegant solutions online ... in this early inception phase of your programming development for this HSS prototype ... I would like to know why I do not see you programmers asking questions such as ... What would make the end user's life the easiest when using this code? I know you can solve the problem but an evolution forward would be simple, not simple to a computer scientist but simple to use for a career janitor ... if you could solve the problem of alleviating the stress at using a the computer you could get better content out of the computer ... right now the main problem is that the best content is in the hands of the people least likely to use the computer and the more simple you make the computer to use ... the better the content collection will be in the long run ... That is not what I want to talk about though ... why are you writing code when you could be writing stories? I know the computer is worthless without content so I build content, I know the book is worthless without the combinations of words in them, i know the television is worthless without the television news anchor or the actor, what I want to know from you folks in a very journalistic sense is why are you even bothering to bother to write code for a machine that has only made our lives i would dare say less interesting. why are you feeding the beast your time when you could be writing stories or being an actor or musician or auto mechanic ... why code? why this machine? what do you love about it? what do you hate about it? what do you wonder about it? I want to know so that starting out I know how to further shape my questions with axr ... i want the full story ... i want the real answers ... and i want to know why you are doing this, it would make for great writing if you could elucidate on this point.

  Read the article

• Game Object Factory: Fixing Memory Leaks

  - by Bunkai.Satori

  Dear all, this is going to be tough: I have created a game object factory that generates objects of my wish. However, I get memory leaks which I can not fix. Memory leaks are generated by return new Object(); in the bottom part of the code sample. static BaseObject * CreateObjectFunc() { return new Object(); } How and where to delete the pointers? I wrote bool ReleaseClassType(). Despite the factory works well, ReleaseClassType() does not fix memory leaks. bool ReleaseClassTypes() { unsigned int nRecordCount = vFactories.size(); for (unsigned int nLoop = 0; nLoop < nRecordCount; nLoop++ ) { // if the object exists in the container and is valid, then render it if( vFactories[nLoop] != NULL) delete vFactories[nLoop](); } return true; } Before taking a look at the code below, let me help you in that my CGameObjectFactory creates pointers to functions creating particular object type. The pointers are stored within vFactories vector container. I have chosen this way because I parse an object map file. I have object type IDs (integer values) which I need to translate them into real objects. Because I have over 100 different object data types, I wished to avoid continuously traversing very long Switch() statement. Therefore, to create an object, I call vFactoriesnEnumObjectTypeID via CGameObjectFactory::create() to call stored function that generates desired object. The position of the appropriate function in the vFactories is identical to the nObjectTypeID, so I can use indexing to access the function. So the question remains, how to proceed with garbage collection and avoid reported memory leaks? #ifndef GAMEOBJECTFACTORY_H_UNIPIXELS #define GAMEOBJECTFACTORY_H_UNIPIXELS //#include "MemoryManager.h" #include <vector> template <typename BaseObject> class CGameObjectFactory { public: // cleanup and release registered object data types bool ReleaseClassTypes() { unsigned int nRecordCount = vFactories.size(); for (unsigned int nLoop = 0; nLoop < nRecordCount; nLoop++ ) { // if the object exists in the container and is valid, then render it if( vFactories[nLoop] != NULL) delete vFactories[nLoop](); } return true; } // register new object data type template <typename Object> bool RegisterClassType(unsigned int nObjectIDParam ) { if(vFactories.size() < nObjectIDParam) vFactories.resize(nObjectIDParam); vFactories[nObjectIDParam] = &CreateObjectFunc<Object>; return true; } // create new object by calling the pointer to the appropriate type function BaseObject* create(unsigned int nObjectIDParam) const { return vFactories[nObjectIDParam](); } // resize the vector array containing pointers to function calls bool resize(unsigned int nSizeParam) { vFactories.resize(nSizeParam); return true; } private: //DECLARE_HEAP; template <typename Object> static BaseObject * CreateObjectFunc() { return new Object(); } typedef BaseObject*(*factory)(); std::vector<factory> vFactories; }; //DEFINE_HEAP_T(CGameObjectFactory, "Game Object Factory"); #endif // GAMEOBJECTFACTORY_H_UNIPIXELS

  Read the article

• Designing status management for a file processing module

  - by bot

  The background One of the functionality of a product that I am currently working on is to process a set of compressed files ( containing XML files ) that will be made available at a fixed location periodically (local or remote location - doesn't really matter for now) and dump the contents of each XML file in a database. I have taken care of the design for a generic parsing module that should be able to accommodate the parsing of any file type as I have explained in my question linked below. There is no need to take a look at the following link to answer my question but it would definitely provide a better context to the problem Generic file parser design in Java using the Strategy pattern The Goal I want to be able to keep a track of the status of each XML file and the status of each compressed file containing the XML files. I can probably have different statuses defined for the XML files such as NEW, PROCESSING, LOADING, COMPLETE or FAILED. I can derive the status of a compressed file based on the status of the XML files within the compressed file. e.g status of the compressed file is COMPLETE if no XML file inside the compressed file is in a FAILED state or status of the compressed file is FAILED if the status of at-least one XML file inside the compressed file is FAILED. A possible solution The Model I need to maintain the status of each XML file and the compressed file. I will have to define some POJOs for holding the information about an XML file as shown below. Note that there is no need to store the status of a compressed file as the status of a compressed file can be derived from the status of its XML files. public class FileInformation { private String compressedFileName; private String xmlFileName; private long lastModifiedDate; private int status; public FileInformation(final String compressedFileName, final String xmlFileName, final long lastModified, final int status) { this.compressedFileName = compressedFileName; this.xmlFileName = xmlFileName; this.lastModifiedDate = lastModified; this.status = status; } } I can then have a class called StatusManager that aggregates a Map of FileInformation instances and provides me the status of a given file at any given time in the lifetime of the appliciation as shown below : public class StatusManager { private Map<String,FileInformation> processingMap = new HashMap<String,FileInformation>(); public void add(FileInformation fileInformation) { fileInformation.setStatus(0); // 0 will indicates that the file is in NEW state. 1 will indicate that the file is in process and so on.. processingMap.put(fileInformation.getXmlFileName(),fileInformation); } public void update(String filename,int status) { FileInformation fileInformation = processingMap.get(filename); fileInformation.setStatus(status); } } That takes care of the model for the sake of explanation. So whats my question? Edited after comments from Loki and answer from Eric : - I would like to know if there are any existing design patterns that I can refer to while coming up with a design. I would also like to know how I should go about designing the status management classes. I am more interested in understanding how I can model the status management classes. I am not interested in how other components are going to be updated about a change in status at the moment as suggested by Eric.

  Read the article

• Future Of F# At Jazoon 2011

  - by Alois Kraus

  I was at the Jazoon 2011 in Zurich (Switzerland). It was a really cool event and it had many top notch speaker not only from the Microsoft universe. One of the most interesting talks was from Don Syme with the title: F# Today/F# Tomorrow. He did show how to use F# scripting to browse through open databases/, OData Web Services, Sharepoint, …interactively. It looked really easy with the help of F# Type Providers which is the next big language feature in a future F# version. The object returned by a Type Provider is used to access the data like in usual strongly typed object model. No guessing how the property of an object is called. Intellisense will show it just as you expect. There exists a range of Type Providers for various data sources where the schema of the stored data can somehow be dynamically extracted. Lets use e.g. a free database it would be then let data = DbProvider(http://.....); data the object which contains all data from e.g. a chemical database. It has an elements collection which contains an element which has the properties: Name, AtomicMass, Picture, …. You can browse the object returned by the Type Provider with full Intellisense because the returned object is strongly typed which makes this happen. The same can be achieved of course with code generators that use an input the schema of the input data (OData Web Service, database, Sharepoint, JSON serialized data, …) and spit out the necessary strongly typed objects as an assembly. This does work but has the downside that if the schema of your data source is huge you will quickly run against a wall with traditional code generators since the generated “deserialization” assembly could easily become several hundred MB. *** The following part contains guessing how this exactly work by asking Don two questions **** Q: Can I use Type Providers within C#? D: No. Q: F# is after all a library. I can reference the F# assemblies and use the contained Type Providers? D: F# does annotate the generated types in a special way at runtime which is not a static type that C# could use. The F# type providers seem to use a hybrid approach. At compilation time the Type Provider is instantiated with the url of your input data. The obtained schema information is used by the compiler to generate static types as usual but only for a small subset (the top level classes up to certain nesting level would make sense to me). To make this work you need to access the actual data source at compile time which could be a problem if you want to keep the actual url in a config file. Ok so this explains why it does work at all. But in the demo we did see full intellisense support down to the deepest object level. It looks like if you navigate deeper into the object hierarchy the type provider is instantiated in the background and attach to a true static type the properties determined at run time while you were typing. So this type is not really static at all. It is static if you define as a static type that its properties shows up in intellisense. But since this type information is determined while you are typing and it is not used to generate a true static type and you cannot use these “intellistatic” types from C#. Nonetheless this is a very cool language feature. With the plotting libraries you can generate expressive charts from any datasource within seconds to get quickly an overview of any structured data storage. My favorite programming language C# will not get such features in the near future there is hope. If you restrict yourself to OData sources you can use LINQPad to query any OData enabled data source with LINQ with ease. There you can query Stackoverflow with The output is also nicely rendered which makes it a very good tool to explore OData sources today.

  Read the article

• Asynchrony in C# 5 (Part I)

  - by javarg

  I’ve been playing around with the new Async CTP preview available for download from Microsoft. It’s amazing how language trends are influencing the evolution of Microsoft’s developing platform. Much effort is being done at language level today than previous versions of .NET. In these post series I’ll review some major features contained in this release: Asynchronous functions TPL Dataflow Task based asynchronous Pattern Part I: Asynchronous Functions This is a mean of expressing asynchronous operations. This kind of functions must return void or Task/Task<> (functions returning void let us implement Fire & Forget asynchronous operations). The two new keywords introduced are async and await. async: marks a function as asynchronous, indicating that some part of its execution may take place some time later (after the method call has returned). Thus, all async functions must include some kind of asynchronous operations. This keyword on its own does not make a function asynchronous thought, its nature depends on its implementation. await: allows us to define operations inside a function that will be awaited for continuation (more on this later). Async function sample: Async/Await Sample async void ShowDateTimeAsync() {     while (true)     {         var client = new ServiceReference1.Service1Client();         var dt = await client.GetDateTimeTaskAsync();         Console.WriteLine("Current DateTime is: {0}", dt);         await TaskEx.Delay(1000);     } } The previous sample is a typical usage scenario for these new features. Suppose we query some external Web Service to get data (in this case the current DateTime) and we do so at regular intervals in order to refresh user’s UI. Note the async and await functions working together. The ShowDateTimeAsync method indicate its asynchronous nature to the caller using the keyword async (that it may complete after returning control to its caller). The await keyword indicates the flow control of the method will continue executing asynchronously after client.GetDateTimeTaskAsync returns. The latter is the most important thing to understand about the behavior of this method and how this actually works. The flow control of the method will be reconstructed after any asynchronous operation completes (specified with the keyword await). This reconstruction of flow control is the real magic behind the scene and it is done by C#/VB compilers. Note how we didn’t use any of the regular existing async patterns and we’ve defined the method very much like a synchronous one. Now, compare the following code snippet  in contrast to the previuous async/await: Traditional UI Async void ComplicatedShowDateTime() {     var client = new ServiceReference1.Service1Client();     client.GetDateTimeCompleted += (s, e) =>     {         Console.WriteLine("Current DateTime is: {0}", e.Result);         client.GetDateTimeAsync();     };     client.GetDateTimeAsync(); } The previous implementation is somehow similar to the first shown, but more complicated. Note how the while loop is implemented as a chained callback to the same method (client.GetDateTimeAsync) inside the event handler (please, do not do this in your own application, this is just an example).  How it works? Using an state workflow (or jump table actually), the compiler expands our code and create the necessary steps to execute it, resuming pending operations after any asynchronous one. The intention of the new Async/Await pattern is to let us think and code as we normally do when designing and algorithm. It also allows us to preserve the logical flow control of the program (without using any tricky coding patterns to accomplish this). The compiler will then create the necessary workflow to execute operations as the happen in time.

  Read the article

• A proposal for #DAX Code Formatting #ssas #powerpivot #tabular

  - by Marco Russo (SQLBI)

  I recently published a set of rules for DAX code formatting. The following is an example of what I obtain: CALCULATE (     SUMX (         Orders,         Orders[Amount]     ),     FILTER (         ALL ( Customers ),         CALCULATE (             COUNTROWS ( Sales ),             ALL ( Calendar[Date] )         ) > 42 + 8 – 25 * ( 3 - 1 )             + 2 – 1 + 2 – 1             + CALCULATE (                   2 + 2 – 2                   + 2 - 2               )             – CALCULATE ( 4 )     ) ) The goal is to improve code readability and I look forward to implement a code formatting feature in DAX Studio. The DAX Editor already supports the rules described in the article. I am also considering whether to add a rule specific for ADDCOLUMNS / SUMMARIZE because I would like to see the “pairs” of arguments to define a column in the same row or with a special indentation rule (DAX expression for a column is indented in the line following the column name). EVALUATE CALCULATETABLE (        CALCULATETABLE (         SUMMARIZE (             Audience,             'Date'[Year],             Individuals[Gender],             Individuals[AgeRange],             "Num of Rows", FORMAT (COUNTROWS (Audience), "#,#"),             "Weighted Mean Age",                 SUMX (Audience, Audience[Weight] * Audience[Age]) / SUM (Audience[Weight])         ),         SUMMARIZE (             BridgeIndividualsTargets,             Individuals[ID_Individual]         ),         Audience[Weight] > 0        ),        Targets[Target] = "Maschi",     'Date'[Year] = 2010,     'Date'[MonthName] = "January" ) I would like to get feedback for that – you can use comments here or comments in original article. Thanks!

  Read the article

• Advanced Record-Level Business Intelligence with Inner Queries

  - by gt0084e1

  While business intelligence is generally applied at an aggregate level to large data sets, it's often useful to provide a more streamlined insight into an individual records or to be able to sort and rank them. For instance, a salesperson looking at a specific customer could benefit from basic stats on that account. A marketer trying to define an ideal customer could pull the top entries and look for insights or patterns. Inner queries let you do sophisticated analysis without the overhead of traditional BI or OLAP technologies like Analysis Services. Example - Order History Constancy Let's assume that management has realized that the best thing for our business is to have customers ordering every month. We'll need to identify and rank customers based on how consistently they buy and when their last purchase was so sales & marketing can respond accordingly. Our current application may not be able to provide this and adding an OLAP server like SSAS may be overkill for our needs. Luckily, SQL Server provides the ability to do relatively sophisticated analytics via inner queries. Here's the kind of output we'd like to see. Creating the Queries Before you create a view, you need to create the SQL query that does the calculations. Here we are calculating the total number of orders as well as the number of months since the last order. These fields might be very useful to sort by but may not be available in the app. This approach provides a very streamlined and high performance method of delivering actionable information without radically changing the application. It's also works very well with self-service reporting tools like Izenda. SELECT CustomerID,CompanyName, ( SELECT COUNT(OrderID) FROM Orders WHERE Orders.CustomerID = Customers.CustomerID ) As Orders, DATEDIFF(mm, ( SELECT Max(OrderDate) FROM Orders WHERE Orders.CustomerID = Customers.CustomerID) ,getdate() ) AS MonthsSinceLastOrder FROM Customers Creating Views To turn this or any query into a view, just put CREATE VIEW AS before it. If you want to change it use the statement ALTER VIEW AS. Creating Computed Columns If you'd prefer not to create a view, inner queries can also be applied by using computed columns. Place you SQL in the (Formula) field of the Computed Column Specification or check out this article here. Advanced Scoring and Ranking One of the best uses for this approach is to score leads based on multiple fields. For instance, you may be in a business where customers that don't order every month require more persistent follow up. You could devise a simple formula that shows the continuity of an account. If they ordered every month since their first order, they would be at 100 indicating that they have been ordering 100% of the time. Here's the query that would calculate that. It uses a few SQL tricks to make this happen. We are extracting the count of unique months and then dividing by the months since initial order. This query will give you the following information which can be used to help sales and marketing now where to focus. You could sort by this percentage to know where to start calling or to find patterns describing your best customers. Number of orders First Order Date Last Order Date Percentage of months order was placed since last order. SELECT CustomerID, (SELECT COUNT(OrderID) FROM Orders WHERE Orders.CustomerID = Customers.CustomerID) As Orders, (SELECT Max(OrderDate) FROM Orders WHERE Orders.CustomerID = Customers.CustomerID) AS LastOrder, (SELECT Min(OrderDate) FROM Orders WHERE Orders.CustomerID = Customers.CustomerID) AS FirstOrder, DATEDIFF(mm,(SELECT Min(OrderDate) FROM Orders WHERE Orders.CustomerID = Customers.CustomerID),getdate()) AS MonthsSinceFirstOrder, 100*(SELECT COUNT(DISTINCT 100*DATEPART(yy,OrderDate) + DATEPART(mm,OrderDate)) FROM Orders WHERE Orders.CustomerID = Customers.CustomerID) / DATEDIFF(mm,(SELECT Min(OrderDate) FROM Orders WHERE Orders.CustomerID = Customers.CustomerID),getdate()) As OrderPercent FROM Customers

  Read the article

• Cloud hosted CI for .NET projects

  - by Scott Dorman

  Originally posted on: http://geekswithblogs.net/sdorman/archive/2014/06/02/cloud-hosted-ci-for-.net-projects.aspxContinuous integration (CI) is important. If you don’t have it set up…you should. There are a lot of different options available for hosting your own CI server, but they all require you to maintain your own infrastructure. If you’re a business, that generally isn’t a problem. However, if you have some open source projects hosted, for example on GitHub, there haven’t really been any options. That has changed with the latest release of AppVeyor, which bills itself as “Continuous integration for busy developers.” What’s different about AppVeyor is that it’s a hosted solution. Why is that important? By being a hosted solution, it means that I don’t have to maintain my own infrastructure for a build server. How does that help if you’re hosting an open source project? AppVeyor has a really competitive pricing plan. For an unlimited amount of public repositories, it’s free. That gives you a cloud hosted CI system for all of your GitHub projects for the cost of some time to set them up, which actually isn’t hard to do at all. I have several open source projects (hosted at https://github.com/scottdorman), so I signed up using my GitHub credentials. AppVeyor fully supported my two-factor authentication with GitHub, so I never once had to enter my password for GitHub into AppVeyor. Once it was done, I authorized GitHub and it instantly found all of the repositories I have (both the ones I created and the ones I cloned from elsewhere). You can even add “build badges” to your markdown files in GitHub, so anyone who visits your project can see the status of the lasted build. Out of the box, you can simply select a repository, add the build project, click New Build and wait for the build to complete. You now have a complete CI server running for your project. The best part of this, besides the fact that it “just worked” with almost zero configuration is that you can configure it through a web-based interface which is very streamlined, clean and easy to use or you can use a appveyor.yml file. This means that you can define your CI build process (including any scripts that might need to be run, etc.) in a standard file format (the YAML format) and store it in your repository. The benefits to that are huge. The file becomes a versioned artifact in your source control system, so it can be branched, merged, and is completely transparent to anyone working on the project. By the way, AppVeyor isn’t limited to just GitHub. It currently supports GitHub, BitBucket, Visual Studio Online, and Kiln. I did have a few issues getting one of my projects to build, but the same day I posted the problem to the support forum a fix was deployed, and I had a functioning CI build about 5 minutes after that. Since then, I’ve provided some additional feature requests and had a few other questions, all of which have seen responses within a 24-hour period. I have to say that it’s easily been one of the best customer support experiences I’ve seen in a long time. AppVeyor is still young, so it doesn’t yet have full feature parity with some of the older (more established) CI systems available,  but it’s getting better all the time and I have no doubt that it will quickly catch up to those other CI systems and then pass them. The bottom line, if you’re looking for a good cloud-hosted CI system for your .NET-based projects, look at AppVeyor.

  Read the article

• How to deploy global managed beans

  - by frank.nimphius

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} "Global managed" beans is the term I use in this post to describe beans that are used across applications. Global managed beans contain helper - or utility - methods like or instead of JSFUtils and ADFUtils. The difference between global managed beans and static helper classes like JSFUtis and ADFUtils is that they are EL accessible, providing reusable functionality that is ready to use on UI components and - if accessed from Java - in other managed beans. For example, the ADF Faces page template (af:pageTemplate) allows you to define attributes for the consuming page to pass in object references or strings into it. It does not have method attributes that allow command components contained in a template to invoke listeners in managed beans and the ADF binding layer, or to execute actions. To create templates that provide global button or menu functionality, like logon, logout, print etc., an option for developers is to deployed managed beans with the ADF Faces page templates. To deploy a managed bean with a page template, create an ADF library from the project containing the template definition and import this ADF library into the target project using the Resource palette. When importing an ADF library, all its content is added to the project, including page template definitions, managed bean sources and configurations. More about page templates http://download.oracle.com/docs/cd/E17904_01/apirefs.1111/e12419/tagdoc/af_pageTemplate.html Another use-case for globally configured managed beans is for creating helper methods to be used in many applications. Instead of creating a base managed bean class that then is extended by all managed beans used in applications, you can deploy a managed bean in a JAR file and add the faces-config.xml file with the managed bean configuration to the JAR's META-INF folder as shown below. Using a globally configured managed bean allows you to use Expression Language in the UI to access common functionality but also use Java in application specific managed beans. Storing the faces-config.xml file in the JAR file META-INF directory automatically makes it available when the JAR file is found in the class path of an application.

  Read the article

• How do you formulate the Domain Model in Domain Driven Design properly (Bounded Contexts, Domains)?

  - by lko

  Say you have a few applications which deal with a few different Core Domains. The examples are made up and it's hard to put a real example with meaningful data together (concisely). In Domain Driven Design (DDD) when you start looking at Bounded Contexts and Domains/Sub Domains, it says that a Bounded Context is a "phase" in a lifecycle. An example of Context here would be within an ecommerce system. Although you could model this as a single system, it would also warrant splitting into separate Contexts. Each of these areas within the application have their own Ubiquitous Language, their own Model, and a way to talk to other Bounded Contexts to obtain the information they need. The Core, Sub, and Generic Domains are the area of expertise and can be numerous in complex applications. Say there is a long process dealing with an Entity for example a Book in a core domain. Now looking at the Bounded Contexts there can be a number of phases in the books life-cycle. Say outline, creation, correction, publish, sale phases. Now imagine a second core domain, perhaps a store domain. The publisher has its own branch of stores to sell books. The store can have a number of Bounded Contexts (life-cycle phases) for example a "Stock" or "Inventory" context. In the first domain there is probably a Book database table with basically just an ID to track the different book Entities in the different life-cycles. Now suppose you have 10+ supporting domains e.g. Users, Catalogs, Inventory, .. (hard to think of relevant examples). For example a DomainModel for the Book Outline phase, the Creation phase, Correction phase, Publish phase, Sale phase. Then for the Store core domain it probably has a number of life-cycle phases. public class BookId : Entity { public long Id { get; set; } } In the creation phase (Bounded Context) the book could be a simple class. public class Book : BookId { public string Title { get; set; } public List<string> Chapters { get; set; } //... } Whereas in the publish phase (Bounded Context) it would have all the text, release date etc. public class Book : BookId { public DateTime ReleaseDate { get; set; } //... } The immediate benefit I can see in separating by "life-cycle phase" is that it's a great way to separate business logic so there aren't mammoth all-encompassing Entities nor Domain Services. A problem I have is figuring out how to concretely define the rules to the physical layout of the Domain Model. A. Does the Domain Model get "modeled" so there are as many bounded contexts (separate projects etc.) as there are life-cycle phases across the core domains in a complex application? Edit: Answer to A. Yes, according to the answer by Alexey Zimarev there should be an entire "Domain" for each bounded context. B. Is the Domain Model typically arranged by Bounded Contexts (or Domains, or both)? Edit: Answer to B. Each Bounded Context should have its own complete "Domain" (Service/Entities/VO's/Repositories) C. Does it mean there can easily be 10's of "segregated" Domain Models and multiple projects can use it (the Entities/Value Objects)? Edit: Answer to C. There is a complete "Domain" for each Bounded Context and the Domain Model (Entity/VO layer/project) isn't "used" by the other Bounded Contexts directly, only via chosen paths (i.e. via Domain Events). The part that I am trying to figure out is how the Domain Model is actually implemented once you start to figure out your Bounded Contexts and Core/Sub Domains, particularly in complex applications. The goal is to establish the definitions which can help to separate Entities between the Bounded Contexts and Domains.

  Read the article

< Previous Page | 362 363 364 365 366 367 368 369 370 371 372 373  | Next Page >