Search Results

Search found 14041 results on 562 pages for 'home surveillance'.

Page 367/562 | < Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >

• Lightweight, low cost enterprise backup solution

  - by Scott

  Looking for a backup solution primarily for Windows clients (XP/7), that will either back up to 2 different servers (1 on site, 1 off site - internet - can be our own server), or back up to 1 server and then we would need to somehow backup that server offsite/internet. By lightweight, I mean the backup client software should not eat up much memory and processor since some of the client machines are older. I am used to using Crashplan for home use - the pricing is nice for the amount of backup I get, and it works great / easy to install and get going - I can back up to my own machines locally and over the net. However, the price is going to be a little steep for enterprise level backup, 1500+ machines. Possibly ZManda and Bacula are good choices to consider? Are they light weight? Can the clients/agents be set to go over the net and/or multiple backup servers?

  Read the article

• Remote access not working without connected monitor

  - by winSharp93

  I am trying to configure a Windows Server 2008 as a Home Server for my personal use (mainly for storing documents, hosting source-control, etc.). The "server" consists of an Intel Atom 2700DC board and an Intel SSD. Configuring remote access to the server, I am confronted with a very strange problem: As long as a monitor is connected to my server, remote access works without any problems. However, when no monitor is connected at boot-time, remote access simply won't work (I keep getting errors when trying to connect that the remote server was not found or that remote access is disabled). Windows definitely boots when no monitor is connected as I receive a message asking me whether to enter safe mode when booting after powering the server down by plugging the power cord. When I plug in a monitor after boot, it stays turned off and remote desktop connections still fail. Do you have any ideas about what I could try?

  Read the article

• failed to use mutt to send mail to company mailbox

  - by Acewind

  I'm using mutt&postfix on CentOS 6.2: mutt-1.5.20-2.20091214hg736b6a.el6_1.1.x86_64 postfix-2.6.6-2.2.el6_1.x86_64 When I try to send mail to my company mailbox, I receive an error: mutt -s "test" [email protected] < /home/mail.txt error from postfix: : host out1.ourcompany.com[10.30.17.100] said: 555 Syntax error (in reply to MAIL FROM command) Then I try to use service sendmail as SMTP server, but also failed: **----- The following addresses had permanent fatal errors ----- (reason: 555 Syntax error) ----- Transcript of session follows ----- ... while talking to out1.ourcompany.com.: MAIL From: SIZE=667 <<< 555 Syntax error 554 5.0.0 Service unavailable** Any body can tell me why? Thanks!!!! I can make sure DNS is OK, and I set realname "root@myserver" in /etc/Muttrc

  Read the article

• How can i set new domains to respond to my server

  - by André

  I would like to create a page for new clients in my hosting. When someone register a domain, sometimes that person don't have a dns, or the hosting didn't created the account. So the page will not respond. Is there any way to set in my primary domain DNS to respond to all domains pointing to me, to a specific new page like home/resseler/public_html/soon.html ? Like a CNAME myserver.com/soon.html CNAME ~~all domains pointing to my ns1 and ns2. A normal default page for news domains pointed to my server without account creation.

  Read the article

• Can you plug-in the battery while laptop is on AC only?

  - by Ivan Petrushev

  Hello, I'm using my laptop at home with battery removed and only connected to the AC power. However I'm lacking the mobility as my power cord is kinda short. Is it safe from electrical point of view to plug in the battery while the laptop is connected to AC and disconnect the AC power afterwards? What about the opposite side of the question - is it safe (or what the damage could be) if you work on battery, plug in the AC and unplug the battery? If there are differents for different models of laptops, I'm asking about IBM Lenovo T60. Is there such thing as a 'hot-plug battery'?

  Read the article

• Using wget to recursively download whole FTP directories

  - by user9406

  I want to copy all of the files and folders from one host to another. The files on the old host sit at /var/www/html and I only have FTP access to that server, and I can't TAR all the files. Regular connection to the old host through FTP brings me to the /home/admin folder. I tried running the following command form my new server: wget -r ftp://username:[email protected] But all I get is a made up index.html file. What the right syntax for using wget recursively over FTP?

  Read the article

• Lagging digital tv over ethernet

  - by Steve

  I have a HD Home Run TV over ethernet device, which connects the aerial to my router, and from there the router connects to my PC over about 15m of 100Mbps ethernet cable. The TV output lags every second. It does not do so for a computer much closer to the router. It is odd to me that the network rate is around 7Mbps on a 100Mbps cable. I am not downloading or streaming anything else on the affected computer. Is this lag caused by the speed of the cable, the length of the cable, or interference on the cable? I am considering swapping the ethernet cable with shielded ethernet cable.

  Read the article

• Why does Apache ignore my Directory block?

  - by Codemonkey

  I just moved my projects into a new workstation. I'm having trouble getting my Apache installation to acknowledge my .htaccess files. This is my /etc/apache2/conf.d/dev config file: <Directory /home/codemonkey/dev/myproject/> Options -Indexes AllowOverride All Order Allow,Deny Deny from all </Directory> I know the config file is being included by Apache because it complains if I put erroneous syntax in it (Action 'configtest' fails). My project is reachable through Apache by a symlink in the /var/www directory. The server is running with my user and group, so it has my permissions. My entire dev folder has permissions set to 770 recursively. Despite all this, I'm still getting an indexed display of my project folder when I visit http://localhost/myproject. Why isn't the above config making it impossible to view the folder in the browser?

  Read the article

• Sony Vaio: I can't type 'less and greater than' signs in TR keyboard layout

  - by Mehper C. Palavuzlar

  I have a strange trouble with my Sony Vaio VPCCW21FX. My laptop has a Turkish Q keyboard and I'm using TR keyboard layout on Windows 7 x64 Home Premium. The problem is, I cannot find a usual way to type less than or greater than signs unless I switch to EN keyboard layout. These signs are showed on the keyboard together with the Turkish letters "Ö" and "Ç", as you can see from the below photo of my laptop's keyboard. So, how can I type these signs without switching to EN keyboard layout? I tried Fn and Alt keys but it doesn't work. I need to use TR layout since I need Turkish letters while writing my documents and e-mails.

  Read the article

• Recommendation for a non-standard SSL port

  - by onurs

  Hey guys, On our server I have a single IP, and need to host 2 different SSL sites. Sites have different owners so have different SSL certificates, and can't share the same certificate with SAN. So as a last resort I have modified the web application to give the ability to use a specified port for secure pages. For its simple look I used port 200. However I'm worried about some visitors may be unable to see the site because of their firewalls / proxies blocking the port for ssl connections. I heard some people were unable to see the website, a home user and someone from an enterprise company, don't know if this was the reason. So, any recommendations for a non-standard SSL port number (443 is used by the other site) which may work for visitors better than port 200 ? Like 8080 or 8443 perhaps? Thanks!

  Read the article

• Technicolor TG582n with external DHCP server [on hold]

  - by Jack

  We have a small home setup with a Technicolor TG582n on Plusnet ISP. We have a Samba4 DC with DNS forwarding enabled. The DC forwards to the Technicolor. However, the client machines have their DNS settings manually set. This is an annoyance when using laptops on other networks. We would like to have DHCP handled on the server machine, such that when a client connects to the Technicolor, it gets its IP and DNS information from the DHCP server, eliminating the need to manually set adapter DNS settings. However, I cannot find an option to disable DHCP on the Technicolor and am not completely clear on how one would point DHCP services to the server from the Technicolor if there were the option. So, how would one make the Technicolor use an external server for DHCP leases?

  Read the article

• Systemd can't start script?

  - by TokyoMEWS

  I have a BASH-script I want to run on start up. My system is running systemd so I created a .service file with whith what I think is the neccessary information: [Unit] Description=My Script After=network.target [Service] ExecStart=/home/myscript.sh [Install] WantedBy=multi-user.target I used systemctl enable to 'register' it an rebooted. On boot I was told my script would be executed, but I could neither see any of the messages ECHO should display on screen nor did it write something to a file, according to what I had written in the script. Additionally, It does not start the application it's supposed to start. Systemctl status tells me that the script has run and exited successfully. Still, the script has no effect. If I run the script from a shell it works perfectly fine. Do any of you know what could be my problem?

  Read the article

• I get regular power surges and my UPS ticks a lot due to a welding plant. Is this good or bad?

  - by EApubs

  In our home, there is a mechanic who often use a welding plant. When he use it, I think we get a power surge. My UPS ticks madly (not beep, it ticks). Sometimes, I even lose power to the keyboard. When typing, some keys get missing. 1) My question is, is it good for the computer? The UPS claimed to have surge protection. But isn't it working? What should I do to protect my PC? 2) The second question is, I also have a broadband router which is not connected to the UPS. Will it be effected?

  Read the article

• "Always available offline" option missing on one network drive in Windows 7

  - by Rynardt

  My network setup at home has 2 network storage devices on the network. The one is for media content on a Popcorn Hour A-110 and the other is a D-Link DNS-320 in RAID 1 configuration for business files. When I access these network drives and right click a folder the following context menu appears for the A-110 device, but not for the D-link. I have tested this in both Windows 7 32bit and Windows Vista 64bit. In both instances the "Always available offline" option is only available for the A-110 storage device, and not for the D-link. How do I get this option for the D-link? Any advice or ideas are welcome.

  Read the article

• Cannot access the filesystems using LiveCD (LVM2,EXT2)

  - by ftkg

  I have to restore the /etc/passwd file I accidentally renamed in my Ubuntu Server, so I booted the machine using a LiveCD. Problem is, the system filesystem does not appear in Nautilus, under 'Devices'. Am I missing anything? ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000956dc Device Boot Start End Blocks Id System /dev/sda1 * 2048 499711 248832 83 Linux /dev/sda2 501758 625141759 312320001 5 Extended /dev/sda5 501760 625141759 312320000 8e Linux LVM ubuntu@ubuntu:~$ mount /cow on / type overlayfs (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu) ubuntu@ubuntu:~$ sudo blkid /dev/loop0: TYPE="squashfs" /dev/sda1: UUID="aad69790-198d-45bc-9ccd-e4cba7456914" TYPE="ext2" /dev/sda5: UUID="wbIDX7-RILL-VtFT-gX15-N1GJ-Yyfg-V8Oe5m" TYPE="LVM2_member" /dev/sr0: LABEL="Ubuntu 12.04 LTS i386" TYPE="iso9660" ubuntu@ubuntu:~$ cat /etc/fstab overlayfs / overlayfs rw 0 0 tmpfs /tmp tmpfs nosuid,nodev 0 0

  Read the article

• Mapping an sFTP connection to a Windows drive?

  - by Nicolas

  I'm looking for a way to map an sFTP connection to a Windows (Vista) drive. In other words, a tool that would add a new drive (let's say N:) to my computer, that would directly point to my remote server via sFTP. That way, "N:\my_dir\file.txt" would actually be something like "/home/user/my_dir/file.txt" on the remote server. Reading the file on Windows would download it, and writing content in it would upload it...network transfers being made via sFTP. I'm aware of Novell NetDrive, but it has various issues with long filenames, and seems to corrupt UTF-8 files content depending on the BOM. Do you know about any reliable alternative ? Thanks ! Edit : I have complete control of the remote server, except that it's remote enough for me not to be able to physically access it.

  Read the article

• My D-Link Router is only allowing one connection

  - by Blaze

  My Router (Model: DI-624) is only allowing one wireless connection to one laptop. The other laptop is stuck hanging at connecting to the Internet I have the SSID set as "Pedro-Home" and is using a WPA PSK secured password. I have set the router using "Blaze-PC" while wired. Both Laptops critically need the Internet. > Dynamic DHCP Client List > > Host Name IP Address MAC > Address Expired Time > Blaze-PC 192.168.0.100 70-f1-a1-ff-39-a8 Apr/21/2011 17:49:14 > pedro 192.168.0.105 00-26-82-c8-47-25 Apr/21/2011 17:50:05 <<This computer isn't connecting.

  Read the article

• What would cause a CMD window to open after windows starts?

  - by Carl B

  As of the past few weeks, when I start windows, A CMD window opens and stays open after all the programs and applications launch. I have just been exiting or closing the box, but I have been wondering what would cause it to open in the first place? I have checked to see what is in start up (and I have been looking for CMD or RUN) but I don't see anything out of the ordinary. How can I get this to stop? I have windows 7 Home premium 64.

  Read the article

• Launching LibreOffice Files - Unusual Window Behaviour

  - by Mike

  Ubuntu 11.10 Unity. If I launch LibreOffice Files (ODS, ODT, ODP) with a double click in their home folders they launch with the appropriate application (Calc, Writer, Impress) however the application windows do not display the usual Close, Minimize, Restore buttons in the left hand corner. There is just a blank space where they should be. In the Unity launcher on the left there is not the expected white arrow next to the launcher icon and the open app is not seen by the ALT+TAB keystroke when you have multiple windows open. For example: if you have an app open in this way and say Firefox, if you minimize Firefox you are only left with the desktop and you have no way to locate the open LibreOffice app. Clicking the app's icon in the launcher simply opens another instance. A messy workaround is to click [Firefox] to a restored window and the LibreOffice app can be seen behind it allowing a mouse click to bring it forward. If I open the LibreOffice app from the launcher and then Open a file from its menu, it all behaves as expected. I don't find this as convenient; anyone know how to fix the bad behaviour?

  Read the article

• Word 2007 "Out of Memory or Disk Space" Error on launch.

  - by Adam

  Word 2007 is installed on a Vista Home Premium machine and whenever it starts up it opens what appears to be a dynamic installer to do something and then throws up the "Out of Memory or Disk Space" error. Word 2007 never completes starting up. Reinstalling Word hasn't helped and if I can avoid reinstalling Windows until Windows 7 is released and get Word working in the mean time, that would be ideal. I've been looking around for a solution, once of which seemed to point to a problem with the user account. I created a second user on the machine and Word still had the same problem. The other solution that seems possible is a corrupted normal.dot/normal.dotm file. However, even in the location it should be, I can't seem to find it. Am I going in the right direction with this? Is there another solution I haven't come across that will fix this? If it is possible that renaming normal.dot/normal.dotm how can I find it?

  Read the article

• Configure IIS 6 to deny access to specific file based upon IP address

  - by victorferreira

  Hello guys, We are using IIS 6 as our webserver. And we need to deny the access for one specif file, placed in only one specific URL, to everybody OUTSIDE the local network. In other words, if somebody is trying to access that filme/page from their own computer at home, using the internet, they must not succeed. But, if the same person try to do that at the same network of the web server, its ok. I am not sure about that, but Apache uses ORDER DENY,ALLOW. You specify the URL, allow or deny to all or to a range of IP. Any suggestions? Thanks!

  Read the article

• Apache 2 UserDir for only one VirtualHost

  - by dentarg

  Is it possible to enable the UserDir Directive for just one VirtualHost rather than have it on for all and then disable it (with "UserDir disable") for each VirtualHost you don't want it on? I have tried by putting this inside a <VirtualHost> and comment out everything in the global config (/etc/apache2/conf.d/userdir.conf). No luck though. <IfModule mod_userdir.c> UserDir public.www UserDir disabled root <Directory /home/*/public.www> AllowOverride FileInfo AuthConfig Limit Indexes Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec <Limit GET POST OPTIONS> Order allow,deny Allow from all </Limit> <LimitExcept GET POST OPTIONS> Order deny,allow Deny from all </LimitExcept> </Directory> </IfModule>

  Read the article

• RAID 1 not performing as expected

  - by Faken

  I recently bought a new 320Gb hard drive for my computer to set up RAID 1 on it for some added security. Installation went as smooth as could possibly be (plug in power, plug in data cable, start up computer, Intel software recognized new drive, right click create RAID 1, done!). However, for some inexplicable reason, I seem to have strange test results when using BENCH32. On my old configuration, a single 7200 rpm drive, I achieved about 60 MB/s write and 70 MB/s read. With a new RAID 1 configuration, I would expect the write to be slightly diminished but read to be significantly improved (though not exactly double speed). However, with the new configuration, I am getting 90 MB/s write and only about 80 MB/s read. I should NOT be getting improved write performance, especially NOT better than read! What's going on? My system setup is: q6600 2.4ghz CPU 4Gb DDR2 667mhz RAM on board Intel ICH9R "RAID chip" 2x Seagate 7200 RPM 320GB drives in RAID 1 Widows 7 home premium 64-bit

  Read the article

• Can I use an nVidia Geforce 9600GT for triple-monitor?

  - by John Rudy

  My work PC has (as you can guess from the title) a single Geforce 9600GT card. According to the spec page for this card, both DVI ports are Dual-Link DVI. Both are currently in use on Dell 19" 1280x1024 screens. I'm running Windows 7, with Aero enabled, for what that's worth. What I'm wondering is if I can use a standard DVI splitter cable to drive a third screen from one of the ports -- specifically a Samsung 22" 1680x1050. I'm really outgrowing the two-screen setup, and am strongly considering bringing in my home monitor (which is almost never used) to bolster my usable space. If I can't, then my alternative is to replace one of these Dells with that Samsung, to give me at least a "little" more space. (Before you ask, there's probably no chance I can get my company to spring for a second video card and third monitor. Even if I could, it would not be politically expedient, as a number of my other coworkers are already pretty jealous at my setup.)

  Read the article

• Open Source Projects for Beginning Coders?

  - by MattDMo

  After working as a molecular biologist at the bench for many years, I lost my job last year and am thinking about a career change. I've been using open-source software and doing Linux system administration since the mid 90s, and have written/improved some small shell/Perl/PHP scripts, and am very comfortable building from source, but never progressed to creating non-trivial programs de novo. I want to move to actually learning real programming skills and contributing back to the community, with the possible eventual goal of getting into bioinformatics as a career in the future. I'm a stay-at-home dad now, so I have some time on my hands. I've done a lot of research on languages, and have settled on Python as my major focus for now. I'm set up on GitHub, but haven't forked anything yet. I've looked around OpenHatch some, but nothing really grabbed me. I've heard the advice to work on what you use/love, but that category is so broad that I'm having trouble finding any one thing to get started on. What are your suggestions for getting started? How do you pick a project that will welcome your (possibly amateurish) help? With a fairly limited skill set, how do you find a request that you can handle? What are common newbie mistakes to avoid? Any other advice?

  Read the article

< Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >