Search Results

Search found 15646 results on 626 pages for 'port 80'.

Page 367/626 | < Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >

• Have some questions about setting up a VPN to my private cloud servers

  - by Pure.Krome

  I've got a number of Virtual Servers running at a pretty big Cloud provider. They are all running Windows 2008 R2. I have a CISCO ASA firewall in front of them. Currently, I've got all ports blocked except 80/443/21/3386 (for Remote Desktop). I asked to have a VPN enabled on the firewall and they said it's easy to do BUT I need to use the 3rd party Cisco software. Now, I don't want to get into a debate about it .. but we don't want to install anything extra on our -client- computers. We all use Windows 7 and we love using the built in VPN client to connect to other private LANS we have setup in other locations. So i'm wondering what options I have to create a VPN tunnel to our private cloud LAN? All our cloud servers are part of WORKGROUP, so there's no Active Directory .. nor do we want to install all that. Secondly, we know we can open up a firewall port - so any ports for starting a VPN is fine! Lastly, I was thinking of just using one of the existing servers as the VPN server (and using the Windows VPN software) .. but I'm not sure this is a good thing? Remember - we just want to use the baked in VPN software in Windows 7 .. which is PPTP or SSTP or L2TP/IPSEC. I would -LOVE- to use some free OSS software. For usernames/passwords? We'd probably just have one account .. like U:Hithere P:whatever.. so we don't need any hardcore account management, like Active Directory, etc. So does anyone have any ideas?

  Read the article

• wireless clients not getting correct dhcp addresses

  - by szeli

  I apologise first if this is a stupid problem. I'm new to Cisco networking. I need some help with an existing configuration done by my vendor. Environment: 1. Core switch - Catalyst 6509e vlans configured: a. vlan 50 (wired clients) 10.0.50.x/24 interface IP 10.0.50.20 b. vlan 70 (wireless clients) 10.0.70.x/24 interface IP 10.0.70.20 c. vlan 192 (guest clients) 192.168.1.x/24 interface IP 192.168.1.20 d. trunk port for WLC native vlan 70 allowed vlan 50, 70, 192 2. Cisco 4402 WLC interfaces a. management untagged IP 10.0.70.10 b. ap-manager untagged IP 10.0.70.11 c. service-port n/a IP 192.168.10.1 d. virtual n/a IP 1.1.1.1 e. guestwlan vlan192 IP 192.168.1.100 3. Cisco AIR-LAP1142N-S-K9 LAP01 (WLAN local, interface: management) IP 10.0.70.21/24 GW 10.0.70.20 DHCP server 10.0.50.10 (scope 10.0.70.101 to 200) LAP02 (WLAN guest, interface: guestwlan) IP 192.168.1.21/24 GW 192.168.1.20 DHCP server 192.168.1.10 (scope 192.168.1.101 to 200) here's the problem, wireless clients connected to WLAN guest keep getting DHCP leases from WLAN local 10.0.50.10 (scope 10.0.70.101 to 200) can anyone please help? thanks!

  Read the article

• Follow through - How to setup equivalent USVIDEO.ORG DNS-Proxy on Linux

  - by DNSDC

  I'm quite keen to setup similar service (but FREE) and seems you know how to do this. "you need to run your own private dns with artificial records for example pandora.com you also need a real dns to fall back on. now that all requests for these sites are going to your US located box you can open up port 80 on squid and listen for the traffic. your cache_peer settings should allow you to map each domain to their real ip. The trafic now flows initially from your US located box to the service but then the server responds it responds directly to the host. no magic here. I won't share the fine details as it probably best serves all to not over exploit this." Did you mean we need to 1. Setup Forward-only DNS on a US-based server/ip? 2. Setup cache_peer and cache_peer_domain in Squid, I got this. 3. Any iptables rule, prerouting, postrouting rules needed to accomplish this? Appreciate your expert advice. Cheers, Don

  Read the article

• please explain these mongo statistics

  - by sivann

  My setup: I have 2 hosts, and 2 shards each. Host1 has 2 shards, and is the master of the replicas host2 has the secondaries of the 2 shards. . host1: shard1 (repset1),shard2 (repset2) host2: shard1 (repset1),shard2 (repset2) There's also a 3rd host that acts as arbitrer. I have 50 threads writing randomly to both shards (using a hash) via mongos with REPLICA_SAFE WriteConcern set on each insert. The questions: mongostat displays about 90% locked for both shards in host1 and about 1% locked on host2. Since I use REPLICA_SAFE which supposedly writes to both servers shouldn't the locks be the same? mongostat reports qr=30 for both shards of host1, and qw=0 always. Since I perform only writes how is this possible? Moreover on host2 all queues are reported 0. Faults are abut the same in all shards/hosts (arround 80). netIn/netOut on the secondaries (host2) are always about 200bytes/sec. Too low. mongos has 53 connections, host1's shards have 71 and 71 and host2's shards have 9 and 8. How is this? Please answer whatever you can. Thanks!

  Read the article

• Preventing back connect in Cpanel servers

  - by Fernando

  We run a Cpanel server and someone gained access to almost all accounts using the following steps: 1) Gained access to an user account due to weak password. Note: this user didn't had shell access. 2) With this user account, he accessed Cpanel and added a cron task. The cron task was a perl script that connected to his IP and he was able to send back shell commands. 3) Having a non jailed shell, he was able to change content of most websites in server specially for users who set their folders to 777 ( Unfortunately a common recommendation and sometimes a requirement for some PHP softwares ). Is there a way to prevent this? We started by disabling cron in Cpanel interface, but this is not enough. I see a lot of other options in which an user could run this perl script. We have a firewall running and blocking uncommon outgoing ports. But he used port 80 and, well, I can't block this port as a lot of processes use them to access things, even Cpanel itself.

  Read the article

• Allow SFTP in iptables

  - by Kevin Orriss

  I have just purchased a VPS from linode and am going through the setup guide. I have everything running (apache2, php, mysql etc) but I am being denied access via SFTP when using fileZilla to upload a file. Now this is my second time installing the server as I missed a section out the first time. I was able to connect to my server through SFTP on filezilla the first time and the thing I missed out was adding a new user and editing the iptables in the firewall. So it would seem that the guide I have been following has blocked SFTP but allowed SSH. Here is the iptables file: *filter # Allow all loopback (lo0) traffic and drop all traffic to 127/8 that doesn't use lo0 -A INPUT -i lo -j ACCEPT -A INPUT ! -i lo -d 127.0.0.0/8 -j REJECT # Accept all established inbound connections -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow all outbound traffic - you can modify this to only allow certain traffic -A OUTPUT -j ACCEPT # Allow HTTP and HTTPS connections from anywhere (the normal ports for websites and SSL). -A INPUT -p tcp --dport 80 -j ACCEPT -A INPUT -p tcp --dport 443 -j ACCEPT # Allow SSH connections # # The -dport number should be the same port number you set in sshd_config # -A INPUT -p tcp -m state --state NEW --dport 22 -j ACCEPT # Allow ping -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT # Log iptables denied calls -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 # Reject all other inbound - default deny unless explicitly allowed policy -A INPUT -j REJECT -A FORWARD -j REJECT COMMIT All I would like is a line I need to put in there which allows SFTP over port 22. Thank you for reading this.

  Read the article

• How to make lighttpd respect X-Forwarded-Proto when constructing redirects for directories?

  - by Tim Landscheidt

  We have an nginx proxy at tools.wmflabs.org that receives requests by http and https and passes them by http on to lighttpds on a grid (one lighttpd per top-level path). Requests that reach the proxy by https are received by the lighttpds like this: HEAD /lighttpd-test/test HTTP/1.1 Connection: close Host: tools.wmflabs.org X-Forwarded-Proto: https X-Original-URI: /lighttpd-test/test User-Agent: curl/7.29.0 Accept: */* This works great except in the case where the URL references a physical directory and misses the trailing slash ("/"), as lighttpd then generates a redirect to the http URL: HTTP/1.1 301 Moved Permanently Location: http://tools.wmflabs.org/lighttpd-test/test/ Connection: close Date: Fri, 06 Jun 2014 14:50:29 GMT Server: lighttpd/1.4.28 The relevant parts of our lighttpd configurations are: server.modules = ( "mod_setenv", "mod_access", "mod_accesslog", "mod_alias", "mod_compress", "mod_redirect", "mod_rewrite", "mod_fastcgi", "mod_cgi", ) server.port = $port [...] server.document-root = "$home/public_html" [...] server.follow-symlink = "enable" [...] server.stat-cache-engine = "fam" ssl.engine = "disable" alias.url = ( "/$tool" => "$home/public_html/" ) index-file.names = ( "index.php", "index.html", "index.htm" ) dir-listing.encoding = "utf-8" server.dir-listing = "disable" url.access-deny = ( "~", ".inc" ) [...] How can I make lighttpd respect X-Forwarded-Proto and use it when constructing redirects for directories? I'm aware that I could try to tackle this in nginx, but I'd prefer if I can fix it in lighttpd.

  Read the article

• Nginx Removes the index.php from URL

  - by codeHead

  I have a codeigniter php application on nginx. It works as expected on Apache but after moving to nginx, I noticed that the index.php is automatically removed from the URL in all my links. Infact when I try using index.php it does not go to the desired URL but gets redirected to my default controller. below is a coopy of my nginx.conf file. server{ listen 80; server_name mydomainname.com; root /var/www/domain/current; # index index.php; error_log /var/log/nginx/error.log; access_log /var/log/nginx/access.log main; location / { # Check if a file or directory index file exists, else route it to index.php. try_files $uri $uri/ /index.php ; } location ~* \.php { fastcgi_pass backend; include fastcgi.conf; fastcgi_buffer_size 128k; fastcgi_buffers 4 256k; fastcgi_busy_buffers_size 256k; fastcgi_read_timeout 500; #fastcgi_param SCRIPT_FILENAME $document_root/index.php; add_header Expires "Thu, 01 Jan 1970 00:00:01 GMT"; add_header Cache-Control "no-cache, no-store, private, proxy-revalidate, must-revalidate, post-check=0, pre-check=0"; add_header Pragma no-cache; add_header X-Served-By $hostname; } location ~* ^.+\.(css|js)$ { expires 7d; add_header Pragma public; add_header Cache-Control "public"; } # set expiration of assets to MAX for caching location ~* \.(ico|gif|jpe?g|png)(\?[0-9]+)?$ { expires max; log_not_found on; } } I need to use my URL With the index.php -- please help.

  Read the article

• IPTABLES syntax help to forward Remote Desktop requests to a VM [CentOS host]

  - by NVRAM

  I've a VM running MSWindows XP hosted on my CentOS 5.4 machine. I can rdesktop into it from the hosting machine and work just fine using the private ddress (192.168.122.65), but I now need to allow Remote Desktop access from other computers (not just the machine hosting the VM). [Edit] I only need to allow access for a day or so, so don't want to add a NIC (for XP activation reasons). Could someone help me with the iptables syntax? The VM is on a private/virtual network: 192.168.122.65 and my CentOS machine is on a physical network, at 10.1.3.38 (and 192.168.122.1 as the GW for the virtual net). I found this question, but none of the answers seemed to work and I'm a bit timid at blindly trying variations. My FORWARD rules are as listed. Thanks in advance. # iptables -L FORWARD Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere 192.168.122.0/24 state RELATED,ESTABLISHED ACCEPT all -- 192.168.122.0/24 anywhere ACCEPT all -- anywhere anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable REJECT all -- anywhere anywhere reject-with icmp-port-unreachable RH-Firewall-1-INPUT all -- anywhere anywhere [Edit] If I do play "blindly" is there a simple way to reset the settings on CentOS (a la service network restart)?

  Read the article

• Windows 7 VPN only works if I connect it to itself first

  - by user1799075

  Just so you have some detail, VPN request are port forwarded from a linksys router hosting the global static IP (to the world) to the windows 7 machine. The ports have been added to the OK list. I have the incoming VPN connection setup on win 7 but the only way it will work from anywhere outside the physical machine is if I connect from itself to itself first. For example, let's say my internal static IP is 10.0.0.50 and incoming VPN server connection IP is 10.0.0.80 (both on the same machine). I can't connect via VPN from anywhere unless I first VPN from the machines .50 address back to itself on the .80 address. Once I do that, I can connect form anywhere, even my phone. It's as if once the machine reboots it thinks it should block requests on .80 until .50 connects first. BitDefender antivirus/firewall is loaded (windows firewall is off) I don't see anywhere to exclude ports in the BitDefender control panel. Maybe this initial connection opens the ports and tags them as safe because the initial request came from the same machine? Any thoughts? It's driving me nuts and I'm sick of having to drive half way across town over to the server, try to get building access and do the initial connection. Please help

  Read the article

• Passenger and ServerAlias not cooperating

  - by Pyzo

  I have a ruby application that runs on a server with multiple IP addresses and mutliple vhosts. Here is the configuration of the problematic virtual host: <VirtualHost 10.0.0.10:80> ServerName realname.example.com ServerAlias alias.example.com DocumentRoot /var/www/sites/example/current/public <Directory /var/www/sites/example/current/public> AllowOverride all Options -MultiViews </Directory> ErrorLog /var/log/httpd/example_error_log CustomLog /var/log/httpd/example_access_log common RailsEnv production RackEnv production </VirtualHost> When I pull up realname.example.com the Ruby on Rails application works correctly. On the other hand alias.example.com just gives me Not Found: / I'm fairly certain the correct vhost is getting used because alias.example.com produces a 404 in the correct log file. I've tried adding logging to the Passenger config and it seems to indicate that Passenger is getting the request. Note: I can't redirect alias.example.com to realname.example.com. realname is accessed using a CDN, whereas alias is directly accessed. Anyone have any ideas why this isn't working? I've been banging my head for days and I've got a similar configuration in QA that works as expected.

  Read the article

• Cisco 7206vxr cpu reducing

  - by naimson

  I have a 7206VXR (NPE-G2) . At the rate of 140 kpps i gain 80% of cpu . So i looking for ways how to reduce it? So i want to turn off netflow(but don't want to this,monitoring is highly important for me), but it will give me only 10-20% ? At this moment with 84kpps i have 58% sh processes cpu sorted give me this. PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process 109 163534600 537236763 304 35.38% 32.83% 16.85% 0 IP Input 67 829396 52280 15864 0.15% 0.01% 0.00% 0 Per-minute Jobs 68 5542736 3053476 1815 0.15% 0.18% 0.16% 0 Per-Second Jobs 51 635852 1116315 569 0.07% 0.03% 0.02% 0 Net Background 329 120396 4607274 26 0.07% 0.00% 0.00% 0 EIGRP-IPv4 Hello 105 50508 95032488 0 0.07% 0.05% 0.05% 0 IPAM Manager 6 4068580 476916 8531 0.00% 0.07% 0.05% 0 Check heaps 7 7768 3634 2137 0.00% 0.00% 0.00% 0 Pool Manager 8 0 1 0 0.00% 0.00% 0.00% 0 DiscardQ Backgro 10 8 708 11 0.00% 0.00% 0.00% 0 WATCH_AFS 5 0 1 0 0.00% 0.00% 0.00% 0 RO Notify Timers 12 0 2 0 0.00% 0.00% 0.00% 0 ATM VC Auto Crea 9 0 2 0 0.00% 0.00% 0.00% 0 Timers 11 0 2 0 0.00% 0.00% 0.00% 0 ATM AutoVC Perio 13 296 610532 0 0.00% 0.00% 0.00% 0 IPC Event Notifi 16 0 1 0 0.00% 0.00% 0.00% 0 IPC Zone Manager 17 3584 2980311 1 0.00% 0.00% 0.00% 0 IPC Periodic Tim 4 0 1 0 0.00% 0.00% 0.00% 0 EDDRI_MAIN 19 0 1 0 0.00% 0.00% 0.00% 0 IPC Process leve 20 0 1 0 0.00% 0.00% 0.00% 0 IPC Seat Manager 21 96 174453 0 0.00% 0.00% 0.00% 0 IPC Check Queue 14 4 50890 0 0.00% 0.00% 0.00% 0 IPC Dynamic Cach 3 0 1 0 0.00% 0.00% 0.00% 0 cpf_process_tpQ 24 756 305371 2 0.00% 0.00% 0.00% 0 IPC Keep Alive M 25 2340 610561 3 0.00% 0.00% 0.00% 0 IPC Loadometer 22 0 1 0 0.00% 0.00% 0.00% 0 IPC Seat RX Cont 15 0 1 0 0.00% 0.00% 0.00% 0 IPC Session Serv 18 1620 2980310 0 0.00% 0.00% 0.00% 0 IPC Deferred Por 29 0 1 0 0.00% 0.00% 0.00% 0 Exception contro sh run(greped): http://pastie.org/5483194 Hardware: c7200p-adventerprisek9-mz.151-4.M1.bin Cisco 7206VXR (NPE-G2) processor (revision A) with 917504K/65536K bytes of memory. Processor board ID 2xxxxxxx MPC7448 CPU at 1666Mhz, Implementation 0, Rev 2.2 6 slot VXR midplane, Version 2.1

  Read the article

• strange raid5 issue: [closed]

  - by 8steve8

  ok so ive had a 4x2TB(samsung HD204UI w/firmware patch) raid5 array working normally for about a month. It was in a h57 gigabyte motherboard using the intel raid with windows 7 x64. Today I got an intel h67 motherboard, so I upgraded the intel raid drivers to 10.1.0.1008 from 9.6.0.1014, and I'm not sure if i checked after a reboot, but it caused no problems. I swapped in the new dh67 motherboard, and my array status was "failed". 2 of the 4 drives listed themselves as members, while the other two drives listed themselves as non-members. I tried going back to the old h57 mobo, and downgrading the raid drivers, but the issue remains. It's not port dependent, 2 of the drives always come up as non-members regardless of what port or motherboard they are plugged into. the screenshot should show that the SNs match, which begs the question why the software doesn't realize the drive is a member of the array: http://img837.imageshack.us/img837/6145/both.png I'd like to know if anyone has experienced anything similar, and what should i do, can i force the drive to be recognized as a member (without wiping data)?

  Read the article

• Which Cardbus/PCMCIA -> USB card works with external hard drive?

  - by Carl

  I have an HT-Link Cardbus/PCMCIA USB 2.0 2-port card (NEC / 32-bit). My external hard drive w/USB adapter won't work with it, and it will work plugged directly into a USB port on a different laptop. (My USB ports got fried.) I got the card off E-Bay. My MP3 player works plugged into that card. The drivers for the card say "Known limitations: High Speed Isochronus, USB Composite Devices." (No other details provided.) I don't know if the hard drive adapter is "isochronous" or "composite." I've read there are problems with too little power being supplied to the drive. The cable to the drive has two USB plugs on one end, and it doesn't make any difference if I plug both of them into the Cardbus card. What card should I get? I see many different brands on E-Bay. I need one that supplies sufficient power for an external hard drive, and doesn't have any "known limitations" in the way.

  Read the article

• Nagios: turn off service checks/display on down hosts

  - by Alien Life Form

  I want to to tweak nagios in such a way that all checking stops (with services not displayed, or displayed as unknown) for any down node. Said differently I only want to see one alert for a down host instead of 1 (down) + n (1 for every service). Note that I am interested in service display/status, not only in turning off notifications. Rationale: we use the nagios firefox/chrome plugin to monitor status and nagios' behavior is too noisy giving readings like these (because every node has 20 services): 3 down, 1 unreachable, 4 warnings, 87 critical This means that the 7 critical services on up node (the problem is on the service) are swamped in a slab of red services which are critical only because they sit on a node that's down/unreachable. What I'd rather like to see is: 3 down, 1 unreachable, 80 unknown, 4 warnings, 7 critical Or even 3 down, 1 unreachable, 4 warnings, 7 critical I have looked in service dependencies but I did not fine a way to describe: "make all services on a alive-host dependen on the status of the host check". I found the problem discussed here, where one of the participants thought it was a nagios bug, and here where one of the participants thought it was "as designed". As things are, I am just interested in the effect, much less in the design philosophy. Note that this nagios is checking hundreds of nodes, so the maintainablilty of the solution is also important. TIA and cheers.

  Read the article

• iptables, forward traffic for ip not active on the host itself

  - by gucki

  I have kvm guest which's netword card is conntected to the host using a tap device. The tap device is part of a bridge on the host together with eth0 so it can access the public network. So far everything works, the guest can access the public network and it can be accessed from the public network. Now the kvm process on the host provides a vnc server for the guest which listens on 127.0.0.1:5901 on the host. Is there any way to make this vnc server accessible by the ip address which the guest is using (ex. 192.168.0.249), without interrupting the guest from using the same ip (port 5901 is not used by the guest)? It should also work when the guest is not using any ip address at all. So basically I just want to fake IP xx is on the host and only answer/ forward traffic to port 5901 to the host itself. I tried using this NAT rule on the host, but it doesn't work. Ip forwarding is enabled at the host. iptables -t nat -A PREROUTING -p tcp --dst 192.168.0.249 --dport 5901 -j DNAT --to-destination 127.0.0.1:5901 I assume this is because the IP 192.168.0.249 is not not bound to any interfaces and so no ARP requests for it get answered and so no packets for this IP arrive at the host. How can make it work? :)

  Read the article

• Apache 2 settings for high traffic website

  - by Harry

  I'm having problems with the load on my website. It's an amazon ec2 server with 15Gb ram and 4 CPUs behind an LB. apachetop says I'm getting around 80 reqs per second which seems really low for this kind of server and the load ( given by top ) is usually around 15 but does increase to about 150 in 24 hrs. I'm seeing about 100 active apache processes at any time. Apache is in prefork mode. Mysql is used very little on the server and there are almost no static files. Here are my Apache settings: Timeout 20 KeepAlive Off MaxKeepAliveRequests 0 KeepAliveTimeout 3 <IfModule mpm_prefork_module> StartServers 40 MinSpareServers 25 MaxSpareServers 40 ServerLimit 400 MaxClients 400 MaxRequestsPerChild 4 </IfModule> Can anyone advise on how to tweak the settings? Thanx! Edit: The config was gotten by trial and error. Any and I mean by a number, change to these lines make the load skyrocket in like 5 minutes. It literally jumps to like 200-300 in a matter of minutes. Especially MaxRequestsPerChild. I've tried with 10, 15, 100, 1000 and the load just skyrockets. About php - there are actually only a few php files which aren't really that expensive at all. They just spit some simple stuff out. If I turn on KeepAlive load also goes to space..

  Read the article

• How to find the reason for a weekly downtime on an Ubuntu web server hosted by AWS?

  - by IceSheep

  We started monitoring our web server using Pingdom and found out that we have a downtime of a few minutes every Sunday at 0:00 UTC. The test runs every minute and checks if a successful HTTP response (code 200) is returned on port 80. The test fails due to a timeout (no response after 30 seconds). Here's what we've already checked – without success: Since we run our webserver behind a load balancer, I've set the Pingdom test on the load balancer's public DNS and the webserver's public DNS in order to find out if there's a problem with the AWS load balancer – both tests return the same result We set up Munin on our webserver. Everything looked fine even after the failure. Since the last failure lasted only 2 minutes I suppose Munin couldn't capture a potential problem (it only checks every 5 minutes) I have checked /var/log/apache2/error.log and /var/log/syslog for suspicious entries I have checked /etc/cron.weekly and /etc/crontab for suspicious entries I have searched for files created or last-modified during 0:00 and 0:15 using this method: touch -t 201209020000 start touch -t 201209020015 end find / -newer start -and ! -newer end (nothing found) Has anybody experienced a similar problem? Any proposals on how to find the reason for this behavior? It's Ubuntu 10.04 LTS running on an AWS m1.large instance. Thanks!

  Read the article

• Config nginx for slow connection to avoide corrupted doanlowds

  - by user1850273

  We have a Windows 2003 server that nginx 1.3.8 is running. Our problem is users with slow connction about 10K . Our server is serving our program update files and when they download from our server the downloade file is incompleted or crrupted. (Users can not download file with DL manager and the problem is in IE ) for example in slow connection a file with 25mb , after 2Mb downloaded finish . in high speed connections there is no problem. Also when we redirect these slow connection to other port F.e 50005 with the same config they download will be much better but not good as other servers. Which config we must apply to avoide such these download stops or corrupted downloads in slow connection ? this is our server config : worker_processes 1; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent ' '"$http_user_agent"'; access_log logs/access.log main; sendfile off; keepalive_timeout 60; server { listen 80; server_name localhost; location / { root html; deny 127.0.0.3; index index.html index.htm; } } server_tokens off; } Our server use Htaccess password accounting and we can not use IIS on windows , Which soloution you think is better ? IIS with a extention to use apache htaccess ? Or use apache for windows insted of nginx ? Thank You.

  Read the article

• VirtualBox bridged network not working as expected

  - by iby chenko

  I am having hard time getting Bridged network to work with VirtualBox. Idea is to have host as well as one or more guests on same LAN. Using NAT (default) I do get access to internet and any node on the LAN when working from one of the VM guests. However, no LAN node including host can access (or ping) guest in VM. I need to be able to use any guest as if it was a physical computer on the network (need to be accessed by any machine on LAN). According to my understanding of the VirtualBox documentation, this should be Bridged mode. I think I set it correctly, well, actually there is not much to it: 1. select Bridged mode in VM network setup 2. select physical NIC of the host to connect bridge to 3. start VM When I do this, each VM does get new IP address that corresponds to LAN settings : 192.168.1.100 192.168.1.102 192.168.1.103 etc. where host is 192.168.1.80 / 255.255.255.0 (IP addresses above 100 are served by DHCP server). This seem to be correct based on what I know about ethernet. From VM I can ping other nodes like 192.168.1.50 etc. and I still get ethernet access. So far so good... But I STILL cannot ping any of the other VMs (running ones of course). I cannot ping them from other VMs, from host or from other nodes on the LAN. Aside from fact that IP addresses handed to guests are now local, this still acts same as NAT. What is going on? What am I missing? Regards, I

  Read the article

• NginxHttpAuthBasicModule with Sinatra & Passenger

  - by scainey

  Hi, I'm serving static pages from a Sinatra application using Nginx. I've implemented Basic Authentication for one page on the site using NginxHttpAuthBasicModule, the authentication succeeds but Nginx doesn't resolve the link. Error log gives - 2010/03/22 12:15:19 [error] 7143#0: *2902 open() "/home/me/live/mysite_home/public /mypage" failed (2: No such file or directory), client: 82.71.18.122, server: mysite.com, request: "GET /mypage HTTP/1.1", host: "mysite.com" The actual file is found at: /home/me/live/mysite_home/live/mypage.erb The configuration file is: server { listen 80; server_name mysite.com; root /home/me/live/mysite_home/public; passenger_enabled on; location /mypage { auth_basic "Restricted"; auth_basic_user_file htpasswd; } } server { listen 443; server_name mysite.com; root /home/me/live/mysite_home/public; passenger_enabled on; ssl on; ssl_certificate /etc/nginx/conf/certs/server.crt; ssl_certificate_key /etc/nginx/conf/certs/server.key; keepalive_timeout 70; location /mypage { auth_basic "Restricted"; auth_basic_user_file htpasswd; } } Not sure if this is a Sinatra, Passenger or Nginx thing, or if I'm just missing something.

  Read the article

• Better way to write Apache site-configuration?

  - by user195697

  I have a question regarding the config files in /etc/apache/sites-available. For example I have a site configured in there like this: <VirtualHost *:80> DocumentRoot /usr/share/agendav/web/public ServerName agendav.mysite.tld # Logfiles: CustomLog /var/log/apache2/access_agendav.log combined ErrorLog /var/log/apache2/error_agendav.log LogLevel warn <Directory /usr/share/agendav> Options Indexes DirectoryIndex index.php php_flag magic_quotes_gpc Off php_flag magic_quotes_runtime Off </Directory> </VirtualHost> <VirtualHost *:443> DocumentRoot /usr/share/agendav/web/public ServerName agendav.mysite.tld SSLEngine on SSLCertificateFile /etc/apache2/ssl/apache.crt SSLCertificateKeyFile /etc/apache2/ssl/apache.key # Logfiles: CustomLog /var/log/apache2/access_agendav_ssl.log combined ErrorLog /var/log/apache2/error_agendav_ssl.log LogLevel warn <Directory /usr/share/agendav> Options Indexes DirectoryIndex index.php php_flag magic_quotes_gpc Off php_flag magic_quotes_runtime Off </Directory> </VirtualHost> As you see the Directory directive is redundant in both http and https part of the site. Is it valid to move the Directory directive at the beginnung so it is valid for both blocks or do I have to keep it in there twice? Thanks!

  Read the article

• Enabling `mod_rewrite` apache, permissions issues

  - by rudolph9

  In attempting to enable mod_rewrite on the Apache2 web server installed with Mac OSX 10.7.4. Following these instruction, ultimately using the configuration to host CakePHP applications, I run into permissions issues accessing the site via a web browser when I set the directory block associated with cakephp site /etc/apache2/users/username.conf from: <Directory "/Users/username/Sites/"> Options Indexes FollowSymLinks MultiViews AllowOverride none Order allow,deny Allow from all </Directory> /etc/apache2/users/username.conf to: <Directory "/Users/username/Sites/"> Options Indexes MultiViews AllowOverride none Order allow,deny Allow from all </Directory> <Directory "/Users/username/Sites/cakephp_app/"> Options Indexes FollowSymLinks MultiViews AllowOverride all Order allow,deny Allow from all </Directory> The .htaccess files are the CakePHP 2.2.2 default as follows: /Users/username/Sites/cakephp_app/.htaccess <IfModule mod_rewrite.c> RewriteEngine on RewriteRule ^$ app/webroot/ [L] RewriteRule (.*) app/webroot/$1 [L] </IfModule> /Users/username/Sites/cakephp_app/app/.htaccess <IfModule mod_rewrite.c> RewriteEngine on RewriteRule ^$ webroot/ [L] RewriteRule (.*) webroot/$1 [L] </IfModule> /Users/username/Sites/cakephp_app/app/webroot/.htaccess <IfModule mod_rewrite.c> RewriteEngine on RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(.*)$ index.php [QSA,L] </IfModule> When performing the request via a web browser at to http://0.0.0.0/~username/cakephp_app/index.php the content of the response is Not Found The requested URL /Users/username/Sites/cakephp_app/app/webroot/ was not found on this server. Apache/2.2.21 (Unix) DAV/2 PHP/5.3.10 with Suhosin-Patch Server at 0.0.0.0 Port 80 Upon a request to http://0.0.0.0/~username/ and http://0.0.0.0/~username/cakephp_app/, added to /var/log/apache2/error_log accordingly are the following: [Tue Sep 04 22:53:26 2012] [error] [client 127.0.0.1] File does not exist: /Library/WebServer/Documents/Users, referer: http://0.0.0.0/~username/ [Tue Sep 04 22:53:26 2012] [error] [client 127.0.0.1] File does not exist: /Library/WebServer/Documents/favicon.ico What is causing the issue? Is there server program, ideally available via a homebrew script, which would make hosting CakePHP applications for testing purposes more effective and efficient?

  Read the article

• VMworkstation Windows 7 vm from physical partition?

  - by rich

  Hi All, i have a machine with 2 disks. my secondary drive has two partitions, one of which is a windows 7 64 boot partition. I have VM workstation and i would like to make a VM from the physical partition (described above). Ideally this would boot from the live disk, but if i can make a vmdk from the two partitions on the secondary drive that would be fine. 1 issue is the drive is 140gig raptor of which the two partitions i want are 40g and 30g partitions. the rest of the space is unallocated. So if i make a vmdk i really need it to be fixed at say 80 gig. I have converter but i don't understand how i can make the vmdk using this... specs Drive 1: this drive is a 120 SSD, running the host OS (Windows 7 64bit) - i've got 95 gigs free on this Drive 2: 140 gig raptor, partition 1 40g is also a windows 7 64bit install, partition 2 is 35 gig with program files folder on it.. sorta of needed to get the vm to work. There is 65gig unallocated on this disk. Drive 1 will host drive 2 as a VM.. my hope.

  Read the article

• Server periodically freezing - Help Stabilizing

  - by JonDog

  We run an asp.net/sql server data collection website with a hand full of clients dumping data in and running reports. We moved to a new server (specs below) and have had issues with it freezing and having to reboot it a dozen times over the pass six months. The hosting company has mentioned possible causes (listed below) but cant give a definite answer on what is going wrong. They have offered to reconfigure how ever I like. We have benefited from having a much faster system and really dont want to get rid of the ssd's unless they are the issue. Two possible setup changes that I've talked with them about are also listed below. Any suggestions on what maybe causing the freezing issue as well as suggestion on a new setup would be great. My main questions are: Do SSD generally have problems running the OS & SQL Server on the same RAID Array? and Are the new SSD's still unrefined enough to be running in a production environment? Thanks Current: Xeon Quad Core E3-1270 3.40 Ghz 16 GB DDR3-1333 ECC SDRAM First Hard Drive: 120GB Intel SSD Second Hard Drive: 120GB Intel SSD Third Hard Drive: 120GB Intel SSD Fourth Hard Drive: 120GB Intel SSD SAS 4 Port RAID Card Windows 2012 Standard Edition - 64 Bit MSSQL 2008 Web Edition Possible Causes: Running Sql Server & OS on same RAID Array OS Software Issues Using SSD's CPU Underpowered Not enough RAM Option 1 2x Xeon Quad Core E5-2603 1.80 GHz 16 GB DDR3-1333 ECC SDRAM 1 x 240GB Intel SSD - OS 3 x 1 TB SATA HDD (7200 RPM) - SQL Server SATA 4 Port RAID Card Windows 2012 Standard Edition - 64 Bit Option 2 Dell PowerEdge E3-1270v2 3.5GHz 4 Cores 16 GB DDR3-1600 UDIMM 4 x 128 GB Samsung 840 Pro SSD Add-in H200 (SAS/SATA Controller), 4 Hard Drives - RAID 10 Windows 2012 Standard Edition - 64 Bit

  Read the article

< Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >