Search Results

Search found 18916 results on 757 pages for 'sharing nothing architect'.

Page 367/757 | < Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >

• how to disable isight auto adjustments ?

  - by George Profenza

  The built-in isight cam on my macbook machine keeps re-adjusting the lighting (and focus I think). I need to manually set those, but I found nothing of any use in System Preferences or System Profiler. Any way to access the settings ? Any magic terminal commands that allows access to the camera ? Anyone has a driver that allows for any camera access ? 'mac - it just works'...sure, if you want to use it like a kid. the second you actually want to do something with you mac other than the basic things, you can do on ANY regular machine anyway, your 'rights' are done with, as apple seems to only encourage dumb clients. I'm not saying saying this applies to all mac users, but the 'typical/average' one in my view is only going to use it for media(music,video) and web(facebook,blogging, all that) and maybe podcasting,webcasting,etc....ok this is turning into a rant, so I will finish here.

  Read the article

• Bad DMA/do_IRQ errors on suspend/resume, with occasional freezing

  - by Steve Kroon

  Every time I suspend or resume my laptop (Dell Latitude E6520, bought this year), I get 2 messages of the form displayed on the console just before shutting down/starting up: [ 407.107610] ehci_hcd 0000:00:1d.0: dma_pool_free buffer-128, f6f18000/36f18000 (bad dma) On occasion, I get a message of the form: [ 3753.979066] do_IRQ: 0.177 No irq handler for vector (irq -1) On occasion, my machine freezes with a flashing Caps Lock button when suspending, after which I need to do a hard shutdown. This never happened before the messages started appearing (a while back), and I think it never happens without a do_IRQ message appearing (although I'm not sure about that). [There's nothing in the owner's manual on a flashing Caps Lock button; apparently it may be a kernel panic if the scroll lock also flashes, but the laptop doesn't have a scroll lock light, and there's no message on the console saying kernel panic.] Are these bad DMA/do IRQ messages serious, and what can I do to investigate/troubleshoot them and the freezing? Edit: I've also now received the following error messages a few times: [246943.023908] JBD: I/O error detected when updating journal superblock for sdb1. [246943.023958] Buffer I/O error on device sdb1, logical block 0 [246943.023996] EXT3-fs (sdb1): I/O error while writing superblock Edit: Output of dmesg at http://pastebin.com/ra7MTQEj ; contents of /var/log/kern.log at http://pastebin.com/i6jf0Md9 Edit: the output of some smartctl (-a, -x, --log=error, --log=xerror) instructions is available at http://paste.ubuntu.com/1088488/ . Edit (31/8/2012): Output of dmesg|grep -i ehci available at http://paste.ubuntu.com/1177246/ .

  Read the article

• Internal LTO tape drive becomes hot

  - by claasz

  We use an internal LTO3 tape drive (HP Ultrium 920) in a PC (no particular server hardware) running Linux. The tape drive becomes quite hot - I don't have the exact temperature, but you may touch it for a second or two, then it hurts ;-) This happens when the tape has nothing to do (during reading/writing, it might become even hotter, I haven't checked that). Besides that, the system is working fine. Now I'm wondering Why does the tape becomes so hot? Is this something I need to care about? Is there something like a 'standby' mode for the tape? (I think it should not consume that much energy when it is not used)

  Read the article

• HLSL - Creating Shadows in 2D

  - by richard

  The way that I create shadows is by the following technique: http://www.catalinzima.com/2010/07/my-technique-for-the-shader-based-dynamic-2d-shadows/ But I have questions to HLSL. The way that I currently do it is, I have a black and white image, where Black means 'object', and white means 'nothing'. I then distort the image like in the tutorial. I do this with a pixel shader, but instead of rendering to the screen, I render to a texture, back to my application. I then take this, and create the shadows, and then send it back to the graphics card to undo the distortion, after the shadow has been added - this comes back and I have a stencil of shadow. I can put this ontop of the original image and send them back to the graphics card, which then puts them on the screen. To me this is alot of back and forth. Is there a way i can avoid this? The problem that I am having is that I need to basically go through all positions in the texture 3 times, and use the new new texture every time instead of the orginal one. I tried to read up on Passes, but i don't think that i am heading in the right direction there. Help?

  Read the article

• Forwarding email in a specific folder only

  - by Ian

  I ran across a post on Super User that addressed a question about Outlook email forwarding. One user provided a script to utilize. Sub AutoForwardAllSentItems(Item As Outlook.MailItem) Dim strMsg As String Dim myFwd As Outlook.MailItem Set myFwd = Item.Forward myFwd.Recipients.Add "[email protected]" myFwd.Send Set myFwd = Nothing End Sub This worked good for me, but how would it work if I want to just automatically forward email in a specific folder only? The folder already has email auto directed to it upon receipt. Any ideas?

  Read the article

• How to Fix this specific Google "Fetch as Googlebot" error appearing on my Webmaster Tools?

  - by UXdesigner

  Good day, I'm currently finding out why I have lost all of my website's rank in google. I don't even appear in google results by the domain. But other sites do link me and they appear in the google results. I think it's all about leaving my site two months alone and finding out I had 20k in comment spam, which I completely deleted and fixed with filters and adding a new Disqus comment service. Thing is, I added my site to Google Webmaster Tools and I'm finding out several awful things. For example, when I click in Google Fetch As GoogleBot. I receive this error message below in response to my request. And I don't even know what's the real problem and how to fix it. I simply don't get it. This is what appears: Date: Wednesday, July 20, 2011 9:43:35 AM PDT Googlebot Type: Web Download Time (in milliseconds): 55 HTTP/1.1 403 Forbidden Date: Wed, 20 Jul 2011 16:43:36 GMT Server: Apache Vary: Accept-Encoding Content-Encoding: gzip Content-Length: 248 Keep-Alive: timeout=2, max=100 Connection: Keep-Alive Content-Type: text/html; charset=iso-8859-1 403 Forbidden Forbidden You don't have permission to access / on this server. Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request. Do you guys know anything about this problem ? I need to have Google crawl my site again. I used to have a really nice google result in the past three years. Now, there's nothing. thanks,

  Read the article

• grub crc error after decompressing linux

  - by w00t

  Hi, I have a debian with a raid1 on it. Both HDDs have bootable flags and grub setup in MBR. If I only start up with sda, linux boots. If I only start up with sdb, grub shows up and says Decompressing Linux... crc error -- System halted I have reinstalled grub a few times now but still nothing. It goes like this: /dev/md0 contains /dev/sda1 /dev/sdb1 find /boot/grub/stage1 shows (hd0,1) (hd0,1) The line that boots Linux shows: root (hd0,0) kernel /vmlinuz-2.6.26-1-686 initrd /initrd.img-2.6.26-1-686 This kind of renders my "redundant" array useless. Any clues? update: just to mention, these are 2 different HDDs, sda is 320gb and sdb is 400gb. Both are WD and both have exactly the same partitions, cloned using sfdisk.

  Read the article

• Forbid language switch for certain application(s)

  - by Vasiliy Borovyak

  I have a problem of accidental input language switch. I tried many different settings in order to not do it - change hotkey, install some software (Key Switcher, Keyboard Ninja, Punto Switcher)... But nothing helped. I used to certain hotkey (Ctrl+Shift). Any other hotkey make me even more suffer. The software s found has no feature to avoid accidental switches. What I want is to find a piece of software which can stick "English US" input language to my "Visual Studio". And any Ctrl+Shift pushes inside VS should not lead to language switch. Have any ideas?

  Read the article

• Why has Google toolbar has stopped working in Firefox 3.6.8?

  - by DanM

  Yesterday, I noticed that my Google Toolbar has stopped working. The toolbar is still there, but it is completely blank (no buttons or input fields, just a gray strip of nothing). In addition to this, tooltips have stopped working. If I disable the toolbar, the tooltips return to normal, so that particular problem definitely seems to be a side effect of the toolbar. I tried disabling all my other add-ons, but that made no difference. I also tried uninstalling and reinstalling Google Toolbar. That made no difference. I haven't tried reinstalling the browser, but I'm reluctant to do that unless absolutely necessary. Am I the only one having this problem? Any ideas how to fix? Note: I'm running Windows XP SP3. I'm using Google Toolbar version 7.1.20100723W.

  Read the article

• Music While Coding [closed]

  - by inspectorG4dget

  Hi SO, Generally, while I'm coding, I prefer to listen to some background music. Nothing that'll get me distracted, but something that'll help keep the rhythm and isn't counterproductive when I need to stop coding to debug or to think of a way to solve a small problem that stands in the way of progress. Now, I have read some similar questions on reddit and on SO - specifically: which songs do you find most productive to listen to while coding, Music while programming and more. Sadly a lot of these questions were closed as off-topic, etc. But (1) I don't think this question is off-topic and I think that a lot of programmers can benefit from it. (2) It's a real question. I really want to know what music you guys would recommend because music helps when I'm coding. It's sad that SO: Music to listen to while coding cannot be found and this isn't of much help. I hope this doesn't get closed. PS: I want to turn this into a community wiki, but I don't seem to know how. I'd appreciate any help. Thank you, all. In response to kirk.burleson's comment: In case the question isn't already clear, I'm asking for recommendations/opinions of music to listen to while coding. I would like to know what you listen to when you code so that I can try it too. I am running out of good "coding music" and this is a problem for me because good "coding music" helps me code better.

  Read the article

• Postgresql init.d script not working

  - by Bram Jetten

  I installed Postgresql 8.4 on my VPS with Ubuntu 10.04. Default setup, nothing unusual. After the installation the dbserver is automatically started and is running great. The installer also sets a init.d script in place. This script however, doesn't seem to affect Postgres. $ sudo /etc/init.d/postgresql stop The above line is not stopping the server. The command does not fail or show any message. The logs won't say anything as well. After killing all postgres processes with killall I cannot get Postgres working again using the init script. When rebooting my VPS it somehow starts up and works again.

  Read the article

• Upgrade to 12.04 results to empty Dash, no date & time either on the top panel

  - by Nicolas

  I've upgraded from Ubuntu netbook remix something to 12.04 LTS, and I've got two issues. (Got an Asus eeePc 32bits, Intel 945GME x86/MMX/SSE2 and Intel Atom CPU N270 @ 1.6Ghz x2) Nothing in the Dash. Only the "home" tab, other tabs are missing. No search results whatsoever. Missing elements in the system panel, privacy and date & time. No date & time on the right corner either. I've tried to reset unity with the terminal but the process was a whole mess full of errors. It did show date & time in the system panel (not on the top-right corner) while the process was going on in the terminal. But then it was such a mess (no more icons on the right corner amongst other things), and the process wouldn't complete, so I had to reboot the computer and get Unity as before, still no date & time and privacy.

  Read the article

• IdentityServer Beta 1 Refresh &amp; Windows Azure Support

  - by Your DisplayName here!

  I just uploaded two new releases to Codeplex. IdentityServer B1 refresh A number of bug fixes and streamlined extensibility interfaces. Mostly a result of adding the Windows Azure support. Nothing has changed with regards to setup. Make sure you watch the intro video on the Codeplex site. IdentityServer B1 (Windows Azure Edition) I have now implemented all repositories for Windows Azure backed data storage. The default setup assumes you use the ASP.NET SQL membership provider database in SQL Azure and Table Storage for relying party, client certificates and delegation settings. The setup is simple: Upload your SSL/signing certificate via the portal Adjust the .cscfg file – you need to insert your storage account, certificate thumbprint and distinguished name There is a setup tool that can automatically insert the certificate distinguished names into your config file Adjust the connection string for the membership database in WebSite\configuration\connectionString.config Deploy Feedback Feature-wise this looks like the V1 release to me. It would be great if you could give me feedback, when you find a bug etc. – especially: Do the built-in repository implementations work for you (both on-premise and Azure)? Are the repository interfaces enough to add you own data store or feature?

  Read the article

• Notebook fan spinning at max after trying Linux

  - by Igor Kulman

  I have a Thinkpad T420 (4178-BSG) I use with Windows. The fan (cpu) was always very quiet and I was completely satisfied with it. A few days ago I booted Backtrack Linux from a flashdrive and the fan started to spin at maximum and was very loud. The problem is that this state persists. When I start the Thinkpad and boot Windows as usual the fan start spining at max and never stops. It drives me mad. It looks like somehow the Linux change some settings and I have to suffer. I tried reseting BIOS, updating BIOS, nothing helpes. I even removed the keyboard, looked at the fan but there is no dust.

  Read the article

• What is the correct way to restart udev in Ubuntu?

  - by zerkms

  I've changed the name of my eth1 interface to eth0. How to ask udev now to re-read the config? service udev restart and udevadm control --reload-rules don't help. So is there any valid way except of rebooting? (yes, reboot helps with this issue) UPD: yes, I know I should prepend the commands with sudo, but either one I posted above changes nothing in ifconfig -a output: I still see eth1, not eth0. UPD 2: I just changed the NAME property of udev-rule line. Don't know any reason for this to be ineffective. There is no any error in executing of both commands I've posted above, but they just don't change actual interface name in ifconfig -a output. If I perform reboot - then interface name changes as expected. UPD 3: let I explain all the case better ;-) For development purposes I write some script that clones virtual machines (VirtualBox-driven) and pre-sets them up in some way. So I perform a command to clone VM, start it and as long as network interface MAC is changed - udev adds the second rule to network persistent rules. Right after machine is booted for the first time there are 2 rules: eth0, which does not exist, as long as it existed in the original VM image MAC eth1, which exists, but all the configuration in all files refers to eth0, so it is not that good for me So I with sed delete the line with eth0 (it is obsolete and useless in cloned image) and replace eth1 with eth0. So currently I have valid persistent rule, but there is still eth1 in /dev. The issue: I don't want to reboot the machine (it will take another time, which is not good thing on building-VM-stage) and just want to have my /dev rebuilt with some command so I have ready-to-use VM without any reboots.

  Read the article

• IBM System i Permissions on Database views

  - by Big EMPin

  We have an IBM System i running IBM i OS v6r1. On this system, I have created some database views. What I want to do is give a particular user group access to ONLY these views and nothing else within the library in which the views reside. Is this possible? I had a user group that had read only permissions to all tables and views in the library in which my views are located, and access works when the user is under this usergroup. I tried copying the user group, and then assigning permissions to only include the views I have created, and access is denied. Does a user or usergroup also have to have permissions on the table from which the view originates in order to access the view?

  Read the article

• HTTP 400 error for all websites

  - by Jason Sherman

  A couple of days ago, I started getting HTTP 400 responses from all websites. Nothing will go across port 80. However, everything works if I connect to VPN. The weird thing is, without VPN, other things still work; such as IM and anything else that doesn’t use port 80. Pinging also works. I haven’t noticed this behavior on any other computer on my network. The kicker is, if I log on as a local admin, everything works fine!!! I haven’t installed anything in the last couple weeks and I don’t remember changing any configuration. I ran Forefront and HouseCall and neither found any problems.

  Read the article

• Is this a normal operating temperature range for a New Third-Generation MacBook Air (2.13 MHz, 120 G

  - by doug

  Even with just my text editor open (no web browser) and maybe the terminal, the baseline temperature is usually above 40 C. When i open 4-5 browser tabs in Safari (even if none of Sites have Flash) the temp can quickly go over 50 C. (In addition, i am observing these temps even though i have turned the fan up to 3000 rpms). (i have install smcFanControl on my MBA so i can see the temp in the menu bar.) So this means my MBA is running much warmer than my MBP; and in practice, it means that i have to be very careful how i use my MBA. Of course if i load a Site with Flash, it just freaks out, and often quickly goes above 65 C (I've installed a flash blocker to avoid this). Is anyone else observing this behavior? I have checked the Apple boards and sure enough, there are a lot of complaints, but nothing from Apple.

  Read the article

• Dovecot not working pop3 with postfix

  - by samer na

  $ telnet localhost pop3 Trying ::1... Trying 127.0.0.1... telnet: Unable to connect to remote host: Connection refused $ netstat -l tcp 0 0 *:www : LISTEN tcp 0 0 localhost.localdoma:ipp : LISTEN tcp 0 0 *:smtp : LISTEN tcp 0 0 localhost.localdo:mysql : LISTEN and nothing about dovecot in mail.log or mail.err when I run this service dovecot start I got start: Rejected send message, 1 matched rules; type="method_call", sender=":1.553" (uid=1000 pid=26250 comm="start) interface="com.ubuntu.Upstart0_6.Job" member="Start" error name="(unset)" requested_reply=0 destination="com.ubuntu.Upstart" (uid=0 pid=1 comm="/sbin/init")) in dovecot.conf protocols = imap imaps pop3 pop3s disable_plaintext_auth = no log_timestamp = "%Y-%m-%d %H:%M:%S " mail_location = maildir:/var/spool/mail/%d/%n mail_access_groups = mail first_valid_uid = 106 first_valid_gid = 106 protocol imap { } protocol pop3 { listen=*:110 pop3_uidl_format = %08Xu%08Xv } protocol lda { postmaster_address = [email protected] mail_plugins = quota log_path = /var/log/dovecot-deliver.log info_log_path = /var/log/dovecot-deliver.log } auth default { mechanisms = digest-md5 plain passdb sql { args = /etc/dovecot/dovecot-mysql.conf } userdb sql { args = /etc/dovecot/dovecot-mysql.conf } user = root }

  Read the article

• Oracle Supply Chain at Pella Showcase, April 24-25, 2012

  - by Stephen Slade

  Nothing promtes a product like a grest customer testimony! For nearly a decade, Pella has been holding these 'open-houses' or Showcases as they are called, to illustrate the utilization of Oracle products in their operations. Building custom windows and doors is not an easy task.  With about a trillion combinations of unique sizes, colors and features availalbe, getting the complex multi-unit custom order wrong can be easy to do. I've been to a few of these Showcases and each time,  continually impressed by the precision, best practices and lean disciplines enacted at Pella. Operations representatives and users at Pella, demonstrate the way in which they use Oracle Supply Chain products to deliver fulfillment excellence. Orders are all custom made and delivered in about a week.  Factory tours are conducted and visitors have a chance to see Oracle in operation on the shop floor, driving informational flow and order accuracy in the 99+% range.  It's a must see for anyone considering expansion of their supply chain footprint.  The event is April 24-25 in Pella Iowa, outside Des Moines.   This year, there is a seperate track for CIOs and executives. Register at 1.800.820.5592  - ask for event 10281

  Read the article

• Updating a database connection password using a script

  - by Tim Dexter

  An interesting customer requirement that I thought was worthy of sharing today. Thanks to James for the requirement and Bryan for the proposed solution and me for testing the solution and proving it works :0) A customers implementation of Sarbanes Oxley requires them to change all database account passwords every 90 days. This is scripted leveraging shell scripts today for most of their environments. But how can they manage the BI Publisher connections? Now, the customer is running 11g and therefore using weblogic on the middle tier, which is the first clue to Bryans proposed solution. To paraphrase and embellish Bryan's solution a little; why not use a JNDI connection from BIP to the database. Then employ the web logic scripting engine to make updates to the JNDI as needed? BIP is completely uninvolved and with a little 'timing' users will be completely unaware of the password updates i.e. change the password when reports are not being executed. Perfect! James immediately tracked down the WLST script that could be used here, http://middlewaremagic.com/weblogic/?p=4261 (thanks Ravish) Now it was just a case of testing the theory. Some steps: Create the JNDI connection in WLS Create the JNDI connection in BI Publisher pointing to the WLS connection Build new data models using or re-point data sources to use the JNDI connection. Create the WLST script to update the WLS JNDI password as needed. Test! Some details. Creating the JNDI connection in web logic is pretty straightforward. Log into hte console and look for Data Sources under the Services section of the home page and click it Click New >> Generic Datasource Give the connection a name. For the JNDI name, prefix it with 'jdbc/' so I have 'jdbc/localdb' - this name is important you'll need it on the BIP side. Select your db type - this will influence the drivers and information needed on the next page. Being a company man, Im using an Oracle db. Click Next Select the driver of choice, theres lots I know, you can read about them I just chose 'Oracle's Driver (Thin) for Instance connections; Versions 9.0.1 and later' Click Next >> Next Fill out the db name (SID), server, port, username to connect and password >> Next Test the config to ensure you can connect. >> Next Now you need to deploy the connection to your BI server, select it and click Next. You're done with the JNDI config. Creating the JNDI connection on the Publisher side is covered here. Just remember to the connection name you created in WLS e.g. 'jdbc/localdb' Not gonna tell you how to do this, go read the user guide :0) Suffice to say, it works. This requires a little reading around the subject to understand the scripting engine and how to execute scripts. Nicely covered here. However a bit of googlin' and I found an even easier way of running the script. ${ServerHome}/common/bin/wlst.sh updatepwd.py Where updatepwd.py is my script file, it can be in another directory. As part of the wlst.sh script your environment is set up for you so its very simple to execute. The nitty gritty: Need to take Ravish's script above and create a file with a .py extension. Its going to need some modification, as he explains on the web page, to make it work in your environment. I played around with it for a while but kept running into errors. The script as is, tries to loop through all of your connections and modify the user and passwords for each. Not quite what we are looking for. Remember our requirement is to just update the password for a given connection. I also found another issue with the script. WLS 10.x does not allow updates to passwords using clear type ie un-encrypted text while the server is in production mode. Its a bit much to set it back to developer mode bounce it, change the passwords and then bounce and then change back to production and bounce again. After lots of messing about I finally came up with the following: ############################################################################# # # Update password for JNDI connections # ############################################################################# print("*** Trying to Connect.... *****") connect('weblogic','welcome1','t3://localhost:7001') print("*** Connected *****") edit() startEdit() print ("*** Encrypt the password ***") en = encrypt('hr') print "Encrypted pwd: ", en print ("*** Changing pwd for LocalDB ***") dsName = 'LocalDB' print 'Changing Password for DataSource ', dsName cd('/JDBCSystemResources/'+dsName+'/JDBCResource/'+dsName+'/JDBCDriverParams/'+dsName) set('PasswordEncrypted',en) save() activate() Its pretty simple and you can expand on it to loop through the data sources and change each as needed. I have hardcoded the password into the file but you can pass it as a parameter as needed using the properties file method. Im not going to get into the detail of that here but its covered with an example here. Couple of points to note: 1. The change to the password requires a server bounce to get the changes picked up. You can add that to the shell script you will use to call the script above. 2. The script above needs to be run from the MW_HOME\user_projects\domains\bifoundation_domain directory to get the encryption libraries set correctly. My command to run the whole script was: d:\oracle\bi_mw\wlserver_10.3\common\bin\wlst.cmd updatepwd.py - where wlst.cmd is the scripting command line and updatepwd.py was my update password script above. I have not quite spoon fed everything you need to make it a robust script but at least you know you can do it and you can work out the rest I think :0)

  Read the article

• What I saw at TechEd North America 2014

  - by Brian Schroer

  Originally posted on: http://geekswithblogs.net/brians/archive/2014/05/19/teched-north-america-2014.aspxI was thrilled to be able to attend TechEd North America 2014 in Houston last week. I got to go to Orlando in 2008, and since then I’ve had to settle for watching the sessions online (which ain’t bad – They’re all available on Channel 9 for streaming or downloading. Here are links to the Developer Track sessions and to the sessions from all tracks.) The sessions I attended (with my favorites bolded) were: Shiny new stuff The Microsoft Application Platform for Developers: Create Applications That Span Devices and Services INTRODUCING: The Future of .NET on the Server DEEP DIVE: The Future of .NET on the Server ASP.NET: Building Web Application Using ASP.NET and Visual Studio The Next Generation of .NET for Building Applications The Future of Visual Basic and C# Stuff you can use now Building Rich Apps with AngularJS on ASP.NET Get the Most Out of Your Code Maps SignalR: Building Real-Time Applications with ASP.NET SignalR Performance Optimize Your ASP.NET Web App Modern Web and Visual Studio Visual Studio Power User: Tips and Tricks Debugging Tips and Tricks in Visual Studio 2013 In a world where the whole company uses TFS… Using Functional, Exploratory and Acceptance Testing to Release with Confidence A Practical View of Release Management for Visual Studio 2013 From Vanity to Value, Metrics That Matter: Improving Lean and Agile, Kanban, and Scrum Ain’t Nobody Got Time for That As usual, there were some time slots with nothing of interest and others with 5 things I wanted to see at the same time. Here are the sessions I’m still planning to watch… Getting Started with TypeScript Building a Large Scale JavaScript Application in TypeScript Modern Application Lifecycle Management Why a Hacker Can Own Your Web Servers in a Day! Async Best Practices for C# and Visual Basic Building Multi-Device Apps with the New Visual Studio Tooling for Apache Cordova Applying S.O.L.I.D. Principles in .NET/C# Native Mobile Application Development for iOS, Android, and Windows in C# and Visual Studio Using Xamarin Latest Innovations in Developing ASP.NET MVC Web Applications Zero to Hero: Untested to Tested with Microsoft Fakes Using Visual Studio Cool and Elegant ASP.NET Web Forms with HTML 5 for the Modern Web The Present and Future of .NET in a World of Devices and Services

  Read the article

• HP Probook 4530s great specs, but lagging. Hard Drive?

  - by Mark

  I have this laptop, which has a i3 processor, 4gb memory, 7200rpm hard drive. So there is nothing wrong with the specs. Even when I have no applications open, simply closing and opening windows, lags. Or opening the start menu, or dragging icons across the desktop. sometimes even the cursor lags. So I checked out the resource monitor, and the resources using disk activity are svchost Avast ------- my antivirus, but not much System (PID 4) ------ This is using a huge chunk The total disk activity fluctuates between %50 - %100

  Read the article

• How to load tun module in linux?

  - by rabipelais

  I cannot manage to load the tun module in my archlinux box. I'm trying to connect with openvpn, but the log says nm-openvpn[6662]: Note: Cannot open TUN/TAP dev /dev/net/tun: No such device (errno=19) lsmod | grep tun returns nothing. If I run sudo modprobe tun it returns failure, but no error message, and lsmod still has no tun. The module seems to exist, as there is a tun.ko.gz in /lib/modules/....... I really dont know what else to try. Thanks in advance

  Read the article

• What is blocking incoming packets to port 67?

  - by Peter Robertson

  I have a DSP connected to a Windows 7 laptop by Ethernet. The laptop has all firewalls disabled (I've even tried stopping the Windows firewall service and DHCP). The DSP is sending well-formed BOOTP broadcast packets every 3 seconds to port 67. Wireshark running on the laptop sees these BOOTP packets coming in. I have a program running on the laptop with a socket successfully bound to port 67. I can see this using CurrPorts.exe. Nothing else is shown as accessing port 67. The program never sees any packets coming in. If I run a program in the DSP that sends ordinary UDP packets to port 67, Wireshark sees them coming in and reports that they are corrupt BOOTP packets, but now, my program gets them. Any idea what's going on here?

  Read the article

< Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >