Search Results

Search found 60669 results on 2427 pages for 'time tracking'.

Page 367/2427 | < Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >

  • Does Juniper Networks provide keyloggers with their software?

    - by orokusaki
    I noticed that I had a "USB Mass Storage Device" plugged in when there wasn't in fact anything plugged in to any USB port. I turned it off via Windows (XP), but it's quite concerning. This was after installing Juniper Networks' software for VPN access to an IT guy's stuff. I also notice there is a service called "dsNcService.exe" which apparently is sending information over the internet (even when I'm not in VPN access). The process restarts itself when I end it. Should I be worried that this software is tracking my keystrokes and broadcasting them to my IT guy?

    Read the article

  • Is there an equivalent command for 'init.d/networking restart' in OS X

    - by l0c0b0x
    From time to time, I've encountered issues with OS X clients' network connections (Wired and Wireless, Leopard/Snow Leopard) where nothing will fix the issue, until you reboot. Is there a particular 'network service/process' I should be watching out for? I was thinking it would be useful to know of a command that will reset a 'network connection' type service/process (same as running a sudo /etc/init.d/networking restart). Thanks!

    Read the article

  • a hidden program (virus) send hundred e-mail - Can you have any experience on something similar ?

    - by Aristos
    In one tablet computer yesterday I make the usually automatic updates from ms. This tablet have comodo firewall, and and old nod32. After that I notice very soon, that something start sending hundred smtp e-mail the moment the tablet computer is connected to the internet. Also the previous t time I have make updates, some 'virus' gets on the computer but I find very easy and stop it from run. I find using the autostart from sysinternals, and the process explorer. This virus has also break the automatic update from ms, and lost a lot of time to fix it. This is my usually practice when some call me to delete a virus from xp, I use the process explorer and autostart to locate the program, and delete it from everywhere. How ever the last one is so hard to locate. 0.I delete everything from temp directorys and search for suspicious files everywhere, run the nod32, 1.I use the TCPView to see witch program sending the smpt (I see hundred open smpt connections sending emails) but the SMTP was opened by the main service program. 2. I use the process monitor to locate whats happens but find again the main service that do the job. 3.I start delete many thinks on process explorer, but did not found the one that send the emails 4.I open many times the autorun but did not find there also something suspicion, I stop some thinks, but nothing happends. 5.From the last time that I suspect that this virus come to my computer and I partial remove it, he has broke my windows update, to fix it I lost a lot of time, searching on Internet for the error - it was just a register to a dll. 6.From what I suspect something is trigger after the ms update. 7.For the moment I block the email ports, and try to find a way to locate it. I like to notice here that everything is genius - and I mean everything. I believe that this virus pass from a page, or from an e-mail that this computer receive it in the past. Any help or information are appreciate. If you know anything similar, if you know how this virus send emails and how can I locate it, if you know any anti-virus anti-spyware program that maybe can find it. If you know how a virus gets after the ms updates. Million thanks.

    Read the article

  • Simple tool to graph memory usage?

    - by dbr
    Is there a script that will show memory usage as a graph, for example as a pie-chart, with each process being being a separate slice? I'm not looking for something like Munin to graph memory usage over time, but rather show the memory usage per-process at a single point in time. To make my request even more obscure, it is for a headless server (so no X applications). The simplest way would be to write a PNG file, or possibly an HTML file (which could use Javascript to allow the filtering of processes, changing between graph-types and so on)

    Read the article

  • Script to monitor free space in Hdd

    - by s.mihai
    I have a server app that crushes when the HDD free space it's a multiple of 4Gb (on a Windows Server 2003). In general i keep track myself o that weekly since i use the machine from time to time. Can you point out an app or script (i don't wanna install powershell, is this doable???) that copies some larger files from one folder to another to get the free space out of the multiple of 4Gb range. Best regards, Mike

    Read the article

  • Can a Windows PC do anything while it is sleeping?

    - by Root
    I heard that OS X Mountain Lion on a Mac has a feature called Power Nap : With Power Nap, your Mac sleeps but your applications stay up to date. So you have the latest information — such as mail, notes, reminders, and messages — when your Mac wakes up. Power Nap performs Time Machine backups to Time Capsule and downloads OS X software updates while your Mac sleeps, so you can begin installing as soon as you wake it up. Can Windows do the same on a PC?

    Read the article

  • Fedora 13 post security update boot problem

    - by Alex
    Hello. About a month ago I installed a security update that had new Kernek 2.6.34.x from 2.6.33.x), this is when the problem occurred for the first time. After the install my computer would not boot at all, black screen without any visible hard drive activity (I gave it good 30 minutes on black screen, before took actions)... I poped in installation DVD and went in rescue mode to change back the boot option to old kernel (was just a guess where the problem was). After restart computer loaded just file, took a long time for it to start because of SELinux targeted policy relabel is required. Relabeling could take very long time depending on file size. I assumed that the update got messed up somehow and continued working with modified boot option. Couple of days ago, there was another kernel update. I installed it and same problem as before. This rules out corrupted update theory... Black screen right after 'BIOS' screen before OS gets loaded. I had to rescue system again... Below is copy of my grub.conf file. I am fairly new to LINUX (couple of years of experience), mostly development and basic config... nothing crazy. # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd0,0) # kernel /vmlinuz-version ro root=/dev/mapper/vg_obalyuk-lv_root # initrd /initrd-[generic-]version.img #boot=/dev/sda default=2 timeout=0 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title Fedora (2.6.34.6-54.fc13.i686.PAE) root (hd0,0) kernel /vmlinuz-2.6.34.6-54.fc13.i686.PAE ro root=/dev/mapper/vg_obalyuk-lv_root rd_LVM_LV=vg_obalyuk/lv_root rd_LVM_LV=vg_obalyuk/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet initrd /initramfs-2.6.34.6-54.fc13.i686.PAE.img title Fedora (2.6.34.6-47.fc13.i686.PAE) root (hd0,0) kernel /vmlinuz-2.6.34.6-47.fc13.i686.PAE ro root=/dev/mapper/vg_obalyuk-lv_root rd_LVM_LV=vg_obalyuk/lv_root rd_LVM_LV=vg_obalyuk/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet initrd /initramfs-2.6.34.6-47.fc13.i686.PAE.img title Fedora (2.6.33.8-149.fc13.i686.PAE) root (hd0,0) kernel /vmlinuz-2.6.33.8-149.fc13.i686.PAE ro root=/dev/mapper/vg_obalyuk-lv_root rd_LVM_LV=vg_obalyuk/lv_root rd_LVM_LV=vg_obalyuk/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet initrd /initramfs-2.6.33.8-149.fc13.i686.PAE.img I like my system to be up to date... Let me know if I can post any other files that can be of help. Has anyone else had this problem? Does anyone has any ideas how to fix this problem? p.s. Anything helps, you ppl are great! thx for ur time.

    Read the article

  • Virus sending phishing emails through exchange server

    - by therulebookman
    It appears that there is a virus on my network somewhere that is sending phishing emails through my exchange server. I can see the messages in message tracking and I see many SMTP errors for NDR's and rejected connections from external servers, but I do not see any SMTP authentications and I have logging up to MAX. How can I find the IP or hostname of the PC that is infected? Or is there some other explanation than virus? Anti-virus scan on server is clean. Server is not an open relay. Thanks

    Read the article

  • baffling stat pauses - (reiserfs)

    - by Twirrim
    I've got a SuSE server with reiserfs formatted partitions, all on a RAID1 mirror. I'm noticing odd spikes in iowait, but generally all seems okay. iostat claims not even 3% iowait in general: avg-cpu: %user %nice %system %iowait %steal %idle 6.53 0.03 1.45 2.92 0.00 89.07 After tracking down some odd behaviour when ls'ing, it appears "stat" (ls is aliased to include color which does a stat process on each file) randomly takes 5 seconds on a file in the directory. ReiserFS does a file system sync every 5 seconds, but that's interval between not length of time taken to sync. Out of curiosity I did remount using noatime to see if that would help though as it would reduce sync's workload, but no joy. Anyone got any thoughts what might be causing this pause? Disks appear healthy, RAID controller believes the RAID is healthy, and io stats show the disks aren't working very hard at all.

    Read the article

  • Good option for a transparent internet gateway on Mac OS X

    - by Gareth
    Hi I have a small network of Mac systems, and would like to add some internal monitoring of our internet usage, which has recently begun to climb. I would like to configure one of the machines as an internet gateway, and install some monitoring software that could provide graph indications of network usage by machine. The machine would then double as a workstation and as the internet gateway. I can manually configure the machines on the network to use it as a gateway, and would prefer to avoid an explicit http proxy (although it is an option if necessary). What software would serverfault users recommend to provide simple, easily configurable and maintainable network monitoring on Mac OS 10.5.7 (non-server)? The simplest requirement is monitor usage by IP Address, but additional tracking (e.g. destination, protocol, etc) would be useful.

    Read the article

  • High-end CD/DVD burners?

    - by Robert Harvey
    Do such things exist? I wouldn't mind paying $100 to $200 for one, but it must: Have a very fast spin-up to ready time (less than one second) Have an even faster dismount time (say, half second) Can go from dead stop to laying down bits in two seconds or less Can be instantly abortable and resettable regardless of current operational state Does anyone know of such an animal?

    Read the article

  • How does NFS read cache work on Debian?

    - by Ztyx
    I am planning to use NFS to serve out many small files. They will be read very often so client side caching is crucial. Does NFS handle this? Is there a way to increase the client side caching in some way? ...or should I look at another solution? Syncing using rsync or unison periodically is not an option since the files are modified on the client side from time to time.

    Read the article

  • I need something substantial to do [on hold]

    - by Christian Delapena
    I'm a 19 year old computer geek who was recently exposed to Linux. I know quite a bit of it now and would like to do something substantial with it. I've visited websites like openhatch where you can get started on opensource projects but I'm more interested in something Linux-specific like hosting a website or tracking some important operation. Maybe running a script that will give me data on something important. I don't know. I'm essentially bored and I want to put my knowledge and love of Linux to good use. Someone please point me in the right direction.

    Read the article

  • What part of a computer can you "skimp" on?

    - by Paolo Bergantino
    So I'm thinking about building myself a new rig. I want to go for value more than anything, but I also want to get myself a nice enough setup that I can play the latest games considerably well. Last time I built a computer I skimped on the power supply and it bit me big time later on. I know the ideal answer is "don't skimp on anything", but are there are any parts of a computer you can do relatively well without having a particularly "good" component?

    Read the article

  • What are the pros and cons of AWS Elastic Beanstalk compared with other deployment strategies?

    - by James van Dyke
    I'm pretty new to the whole Netflix OSS stack and deployments in general. As a background for my current level of knowledge ops-wise, my main role is as a front-end application engineer. However, I enjoy the operations side of things, so I'm attempting to setup a new deployment strategy and the tooling for a new project. Our Goals Super easy deploys (we want to push a button to update production) Automated deploys to test environments (using Jenkins) Ease of maintenance (we have an app to write, don't want to spend our time fiddling with production issues) Ability to handle a service oriented architecture (many small apps, various languages and data stores) Enough flexibility to ensure we won't have to change strategies any time soon (we're already trying to get away from RightScale) We're OK with a little more initial setup time if doing so will save us some headaches in the future. So, along these lines, I've been listening to podcasts, watching Ops talks, and reading tons of blog posts and based on our goals and what I've taken to be some forming best practices, we've started forming a plan using Asgard, rolling our package into a jar and rolling that into an AMI. We had this all planned out and like the advantages the process versus using a Chef server and converging instances on the fly (we felt this was error prone given our limited timeline and lack of understanding around a Chef server workflow). However, a coworker did a little looking around on his own and felt like Elastic Beanstalk met our needs. I've looked into it and spun up a test environment with a WAR file and an attached RDS database. Things seem to work and I believe that we can automate deploys to a testing environment using Jenkins via the AWS API. Seems simple enough... perhaps too simple. What I'm wondering is, what's the catch? If Elastic Beanstalk is so simple and effective, why isn't it talked about more? I'm having a hard time finding enough objective opinions and facts about the two different deployment strategies, so I thought I'd ask around. Do you use Elastic Beanstalk? If so, why and what factors lead to that decision? What do you like and dislike? If you don't use Elastic Beanstalk but considered it, what do you use and why didn't you use Elastic Beanstalk? What are the advantages and disadvantages to a Elastic Beanstalk based deployment strategy for an SOA? That is, will Elastic Beanstalk work well with many small applications that rely on each other to work?

    Read the article

  • System restarting without warning

    - by doug
    I was running Windows 7 and from time to time it shutdown with no reason. I was thinking that it might be my fault, because I was using an x86 OS on a Intel Core Duo system with 4GB RAM. I just downloaded Ubuntu x64 in order to do some memory tests. The system is closing itself during the tests. Which can be the reason? What can I do? ps: It is a laptop

    Read the article

  • Corporate Wiki Organization - Technical Documentation

    - by Dave Jarvis
    Corporations have documents describing various aspects of their technical systems, including: Custom Applications Custom Development Frameworks Third Party Applications Accounting Bug Tracking Network Management How To Guides User Manuals Software Tools Web Browsers Development IDEs Graphics GIMP xv Text Editing File Transfer ncFTP WinSCP Hardware Servers Web Database Exchange File Network Devices Printers If you had to use a Wiki to manage the documentation, what other items would you add to the list, and how would you organize it? (For example, would Software Tools make more sense under Third Party Applications?) A few constraints: The structure should not go beyond three levels deep. Avoid the word "and" in favour of two different categories. Keep the structure general: it should appy as broadly as possible. Target audience is primarily technical, but could be visible by anyone.

    Read the article

  • MSSQL Auditing Recomendations

    - by Josh Anderson
    As an aspiring DBA, I have recently been asssigned the task of implementing the tracking of all data changes in the database for a peice of software we are developing. After playing with microsoft's change data capture methods, Im looking into some other solutions. We are planing to distribute our product as a hosted solution and unlimited installations would be desired for maximum scalability. Ive looked at IBM's Guardium as well as DB Audit by SoftTree. Im curious if anyone has any solutions they may have used in the past or possibly any suggestions or methods to achieve complete, and of course cost effective, auditing of data changes.

    Read the article

  • Clock battery broken on Solaris - how to workaround until I can fix the battery

    - by weismat
    My main Solaris server has an issue with its battery and thus I loose around 20 seconds per day. Currently I am using rdate once in the morning to synchronise the time. Which approach should I use until I can change the battery on a weekend? Should I switch from rdate to ntp? The machine runs plenty of cronjobs and thus I need to ensure that everything is started even when the time is changed.

    Read the article

  • How to redirect (or Alias) jump page with Apache

    - by Meltemi
    I'm not an Apache expert but need to make a small change to a web server. We are introducing a "jump page" URL that is different from a primary URL (for tracking reasons). /productA/index.html /productA/jump_index.html Basically i want to log that jump_index.html was requested and then return index.html. I don't want the client to wait 8 seconds or so for a redirect. How should we be handling this? Simply symlink (or alias) the file in the filesystem? Use mod_alias Alias Match (if so how exactly)? something better still?

    Read the article

  • Forefront TMG 2010: Can you monitor realtime TCP connections and bandwidth on a per-user basis?

    - by user65235
    I'm just starting a trial of ForeFront TMG to use as a proxy server. I know I can get a real time activity monitor and filter on a per user basis, but would like to be able to get a real time activity monitor of all users that I can then sort by bandwidth consumed (enabling me to get a view on who the bandwidth hogs are). Does anyone know if this is possible in Forefront TMG or if a third party product is required? Thanks. JR

    Read the article

< Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >