Search Results

Search found 9608 results on 385 pages for 'flash drives'.

Page 368/385 | < Previous Page | 364 365 366 367 368 369 370 371 372 373 374 375  | Next Page >

• VLAN issues between linux kernels 2.6 / 3.3 in an ESX / Cisco environment

  - by David Griffith

  I shall attempt to explain an issue I have encountered - I have a VM running on esx 4.1 with an interface connected to VLAN800 via an access port on a cisco 3750. It runs linux - kernel 2.6.24, and has about 5 to 10 Mbit of chatter on 10.10.0.0/16 and various multicast addresses to look after. I needed to isolate certain devices from certain other devices on the network, with all of them having to talk to that one VM. No, the address space can't be separated, nor can the networks be easily vlan'd apart. The software on the VM listens to one interface only. Private vlans appear to be the way to go. So as a test, I built a bridge on the VM that globs together the vlans as needed. All good, everything works as expected. But occasionally (sigh) there's some latency that trips up a couple of profinet devices on the network because, you know, you're not really supposed to trunk real-time protocols around the place willy-nilly. I shift it to our test/backup server - works nicely, but I don't want it to be running on the test server as we muck around with that a lot. So I says to myself, "I'll put it on a new VM for testing and tweaking." I download a small linux distro with kernel 3.3, and install as a new VM with a the vlans as separate interfaces for testing. I power up the testing VM - ok. I bring up all the separate interfaces - ok. I can ping the production VM, see all sorts of traffic going past with tshark, etc. I build a bridge and put the primary vlan on it - the production VM running 2.6 immediately loses its multicast traffic - Unicast is fine. (?) I shut down the bridge - still no multicast traffic (!?) I power-cycle the production VM(!?!?) - multicast traffic returns. I trunk everything into the testing VM and create vlan interfaces under linux instead - same result, as soon as I start the bridge.... no multicast on the production VM. Ok, so I take a break and leave things alone. I decide to play with a couple of ubiquiti bullet radios - I'm testing various firmware as a side project. I flash a radio with Open-wrt-12.09. I enable a trunk on a port on a cisco on our network so I can muck around with multiple vlans and SSIDs I power up the radio and connect - ok. I create a vlan interface from the trunk.... the same vlan as the production VM wayyyyy over there, three cisco routers away. Ok. I bridge the vlan interface to the wifi interface and immediately get a phone call. The production VM has (suprise!) lost its multicast traffic. Again, nothing comes back until I power-cycle the VM. What the hell is going on?

  Read the article

• Cloud storage provider lost my data. How to back up next time?

  - by tomcam

  What do you do when cloud storage fails you? First, some background. A popular cloud storage provider (rhymes with Booger Link) damaged a bunch of my data. Getting it back was an uphill battle with all the usual accusations that it was my fault, etc. Finally I got the data back. Yes, I can back this up with evidence. Idiotically, I stayed with them, so I totally get that the rest of this is on me. The problem had been with a shared folder that works with all 12 computers my business and family use with the service. We'll call that folder the Tragic Briefcase. It is a sort of global folder that's publicly visible to all computers on the service. It's our main repository. Today I decided to deal with some residual effects of the Crash of '11. Part of the damage they did was that in just one of my computers (my primary, of course) all the documents in the Tragic Briefcase were duplicated in the Windows My Documents folder. I finally started deleting them. But guess what. Though they appeared to be duplicated in the file system, removing them from My Documents on the primary PC caused them to disappear from the Tragic Briefcase too. They efficiently disappeared from all the other computers' Tragic Briefcases as well. So now, 21 gigs of files are gone, and of course I don't know which ones. I want to avoid this in the future. Apart from using a different storage provider, the bigger picture is this: how do I back up my cloud data? A complete backup every week or so from web to local storage would cause me to exceed my ISP's bandwidth. Do I need to back up each of my 12 PCs locally? I do use Backupify for my primary Google Docs, but I have been storing taxes, confidential documents, Photoshop source, video source files, and so on using the web service. So it's a lot of data, but I need to keep it safe. Backup locally would also mean 2 backup drives or some kind of RAID per PC, right, because you can't trust a single point of failure? Assuming I move to DropBox or something of its ilk, what is the best way to make sure that if the next cloud storage provider messes up I can restore?

  Read the article

• How to reliably map vSphere disks <-> Linux devices

  - by brianmcgee

  Task at hand After a virtual disk has been added to a Linux VM on vSphere 5, we need to identify the disks in order to automate the LVM storage provision. The virtual disks may reside on different datastores (e.g. sas or flash) and although they may be of the same size, their speed may vary. So I need a method to map the vSphere disks to Linux devices. Ideas Through the vSphere API, I am able to get the device info: Data Object Type: VirtualDiskFlatVer2BackingInfo Parent Managed Object ID: vm-230 Property Path: config.hardware.device[2000].backing Properties Name Type Value ChangeId string Unset contentId string "d58ec8c12486ea55c6f6d913642e1801" datastore ManagedObjectReference:Datastore datastore-216 (W5-CFAS012-Hybrid-CL20-004) deltaDiskFormat string "redoLogFormat" deltaGrainSize int Unset digestEnabled boolean false diskMode string "persistent" dynamicProperty DynamicProperty[] Unset dynamicType string Unset eagerlyScrub boolean Unset fileName string "[W5-CFAS012-Hybrid-CL20-004] l****9-000001.vmdk" parent VirtualDiskFlatVer2BackingInfo parent split boolean false thinProvisioned boolean false uuid string "6000C295-ab45-704e-9497-b25d2ba8dc00" writeThrough boolean false And on Linux I may read the uuid strings: [root@lx***** ~]# lsscsi -t [1:0:0:0] cd/dvd ata: /dev/sr0 [2:0:0:0] disk sas:0x5000c295ab45704e /dev/sda [3:0:0:0] disk sas:0x5000c2932dfa693f /dev/sdb [3:0:1:0] disk sas:0x5000c29dcd64314a /dev/sdc As you can see, the uuid string of disk /dev/sda looks somehow familiar to the string that is visible in the VMware API. Only the first hex digit is different (5 vs. 6) and it is only present to the third hyphen. So this looks promising... Alternative idea Select disks by controller. But is it reliable that the ascending SCSI Id also matches the next vSphere virtual disk? What happens if I add another DVD-ROM drive / USB Thumb drive? This will probably introduce new SCSI devices in between. Thats the cause why I think I will discard this idea. Questions Does someone know an easier method to map vSphere disks and Linux devices? Can someone explain the differences in the uuid strings? (I think this has something to do with SAS adressing initiator and target... WWN like...) May I reliably map devices by using those uuid strings? How about SCSI virtual disks? There is no uuid visible then... This task seems to be so obvious. Why doesn't Vmware think about this and simply add a way to query the disk mapping via Vmware Tools?

  Read the article

• Why Photoshop CS5's photomerge's result immediately disappear?

  - by koiyu

  I have a bunch of JPG-files which I want to stitch together with Photoshop's Photomerge function. I choose File → Automate → Photomerge... and browse for the files. Photoshop opens the files and starts analyzing. I see the process bar filling and different phases are mentioned on the process bar. Nothing weird there. When the merging is done (and if I don't blink my eyes), I can see layers-palette is populated with the chosen files and, by quickly judging from the layer thumbnails, they're properly aligned. Sometimes the image window itself can be seen, but not always. Problem is that the layers and the image disappear in a flash. There is no error message. Everything is like prior starting the photomerge. No file has been changed. I could continue to use Photoshop normally. This is what I've tried so far: Loaded folder which has 38 JPG images, 4272 x 2848 and ˜ 5 megabytes per file Loaded the same files, but chose Use Files instead of Use Folder in the photomerge's window Loaded 19 JPG images, 4272 x 2848 and ˜ 5 megabytes per file Loaded 10 JPG images, ⇑ see above Loaded 5 JPG images, see above Loaded 3 JPG images, see above Scaled the images to 2256 x 1504 and ˜< 1 megabytes per file Loaded in a set of 38, 19, 10, 5, 3 Following steps are tested with these smaller files and with a set of 5 images Read Adobe's forums and reduced the amount of RAM Photoshop uses gradually from ˜ 80 % to 50 % (though I didn't understand the logic behind this) Would've reduced cache tile size to 128K, but it was set so already Disabled OpenGL Scaled the images to 800 x 533 and ˜ 100 kilobytes per file, loaded a set of 5 Read more unanswered threads around the internet In between each test I closed and reopened Photoshop. This is the first time I've even tried using photomerge. Am I doing something wrong? How can I locate what is the problem? How do I fix this? Photoshop is 64 bit Extended CS5 version. I'm on a mid-2010 quad-core (i5) iMac with up-to-date Mac OS X 10.6.6. Edit: Weird. First loading the images into one file via File → Scripts → Load Files into Stack… and then using Edit → Auto-Align Layers…, which, effectively, is the same as photomerge (even the dialog looks kind of the same), works! Even with the original JPGs without any issues. This doesn't fix photomerge, though.

  Read the article

• Migrating Split Access Database from one domain to another (not working, details in Q)

  - by Expo_Rob

  Some background: I'm a programmer, not a network administrator, who has been asked to migrate some accounting software (Integrated Office Accounting version 3.2) from an existing domain (OLD_NETWORK) to a new domain (NEW_NETWORK). No-body at the office knows how it works under the hood. It is a split Access 2000 database with the back-end shared and on a file server (which is also the DC) using mapped drives. The DC is NT Server 4 SP 6. The new server is server 2003. The two networks are running independently (ie: two computers on each desk). I have been able to get new computers set up on NEW_NETWORK and working with the IOA software just perfectly but for one problem: The company here uses other entirely separate databases which access the tables IOA maintains (specifically the 'customers' table) via links. To switch between these systems, you press F11 then File-Open the appropriate database and away you go (this is necessary to maintain the permissions that the IOA system uses to protect the customers table). The entire database is Access 2000, the links go to other Access databases, SQL-Server is not involved in any way, nor is a migration to SQL server likely. If I can't migrate anything over, everything will stay as it is, and the NEW_NETWORK computers will not be used. The problem: When I try and update these seperate databases (I shall call one "BANK_ACCOUNT", but the name does not matter), it says "this recordset cannot be updated". It also will sometimes not pull information out of the 'customers' table (ie: date_entered) when looking at a report of everyone who opened a bank account on a certain day (ie: today). I have tried: Giving 'everyone' full control via. shared directory permissions Giving 'everyone' full control on a file system level Checking the permissions within Access (everyone has full read/write on all tables) Copying the entire server contents from one file server to another (ie: xcopy everything) Copying the entire local client files from one computer to another, putting them in the exact same position in the file system, with the same permissons (or full control to 'everyone'). Running as an Administrator Taking one of the NEW_NETWORK computers, having it join OLD_NETWORK and run the software (direct copy from a working system with identical drive mappings), this did not work Weeping openly My Question: Is there anything else I can try? (sorry for this being so long)

  Read the article

• HttpWebRequest and Ignoring SSL Certificate Errors

  - by Rick Strahl

  Man I can't believe this. I'm still mucking around with OFX servers and it drives me absolutely crazy how some these servers are just so unbelievably misconfigured. I've recently hit three different 3 major brokerages which fail HTTP validation with bad or corrupt certificates at least according to the .NET WebRequest class. What's somewhat odd here though is that WinInet seems to find no issue with these servers - it's only .NET's Http client that's ultra finicky. So the question then becomes how do you tell HttpWebRequest to ignore certificate errors? In WinInet there used to be a host of flags to do this, but it's not quite so easy with WebRequest. Basically you need to configure the CertificatePolicy on the ServicePointManager by creating a custom policy. Not exactly trivial. Here's the code to hook it up: public bool CreateWebRequestObject(string Url) {    try     {        this.WebRequest =  (HttpWebRequest) System.Net.WebRequest.Create(Url);         if (this.IgnoreCertificateErrors)            ServicePointManager.CertificatePolicy = delegate { return true; };}One thing to watch out for is that this an application global setting. There's one global ServicePointManager and once you set this value any subsequent requests will inherit this policy as well, which may or may not be what you want. So it's probably a good idea to set the policy when the app starts and leave it be - otherwise you may run into odd behavior in some situations especially in multi-thread situations.Another way to deal with this is in you application .config file. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} <configuration>   <system.net>     <settings>       <servicePointManager           checkCertificateName="false"           checkCertificateRevocationList="false"                />     </settings>   </system.net> </configuration> This seems to work most of the time, although I've seen some situations where it doesn't, but where the code implementation works which is frustrating. The .config settings aren't as inclusive as the programmatic code that can ignore any and all cert errors - shrug. Anyway, the code approach got me past the stopper issue. It still amazes me that theses OFX servers even require this. After all this is financial data we're talking about here. The last thing I want to do is disable extra checks on the certificates. Well I guess I shouldn't be surprised - these are the same companies that apparently don't believe in XML enough to generate valid XML (or even valid SGML for that matter)...© Rick Strahl, West Wind Technologies, 2005-2011Posted in .NET  CSharp  HTTP  

  Read the article

• Install XP Mode with VirtualBox Using the VMLite Plugin

  - by Mysticgeek

  Would you like to run XP Mode, but prefer Sun’s VirtualBox for virtualization?  Thanks to the free VMLite plugin, you can quickly and easily run XP Mode in or alongside VirtualBox. Yesterday we showed you one method to install XP Mode in VirtualBox, unfortunately in that situation you lose XP’s activation, and it isn’t possible to reactivate it. Today we show you a tried and true method for running XP mode in VirtualBox and integrating it seamlessly with Windows 7. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. Install XP Mode Make sure you’re logged in with Administrator rights for the entire process. The first thing you’ll want to do is install XP Mode on your system (link below). You don’t need to install Windows Virtual PC. Go through and install XP Mode using the defaults. Install VirtualBox Next you’ll need to install VirtualBox 3.1.2 or higher if it isn’t installed already. If you have an older version of VirtualBox installed, make sure to update it. During setup you’re notified that your network connection will be reset. Check the box next to Always trust software from “Sun Microsystems, Inc.” then click Install.   Setup only takes a couple of minutes, and does not require a reboot…which is always nice. Install VMLite XP Mode Plugin The next thing we’ll need to install is the VMLite XP Mode Plugin. Again Installation is simple following the install wizard. During the install like with VirtualBox you’ll be asked to install the device software. After it’s installed go to the Start menu and run VMLite Wizard as Administrator. Select the location of the XP Mode Package which by default should be in C:\Program Files\Windows XP Mode. Accept the EULA…and notice that it’s meant for Windows 7 Professional, Enterprise, and Ultimate editions. Next, name the machine, choose the install folder, and type in a password. Select if you want Automatic Updates turned on or not. Wait while the process completes then click Finish.   The VMLite XP Mode will set up to run the first time. That is all there is to this section. You can run XP Mode from within the VMLite Workstation right away. XP Mode is fully activated already, and the Guest Additions are already installed, so there’s nothing else you need to do!  XP Mode is the whole way ready to use. Integration with VirtualBox Since we installed the VMLite Plugin, when you open VirtualBox you’ll see it listed as one of your machines and you can start it up from here.   Here we see VMLite XP Mode running in Sun VirtualBox. Integrate with Windows 7 To integrate it with Windows 7 click on Machine \ Seamless Mode…   Here you can see the XP menu and Taskbar will be placed on top of Windows 7. From here you can access what you need from XP Mode.   Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. This works so seamlessly you forget if your working in XP or Windows 7. In this example we have Windows Home Server Console running in Windows 7, while installing MSE from IE 6 in XP Mode. At the top of the screen you will still have access to the VMs controls.   You can click the button to exit Seamless Mode, or simply hit the right “CTRL+L” Conclusion This is a very slick way to run XP Mode in VirtualBox on any machine that doesn’t have Hardware Virtualization. This method also doesn’t lose the XP Mode activation and is actually extremely easy to set up. If you prefer VMware (like we do), Check out how to run XP Mode on machines without Hardware Virtualization capability, and also how to create an XP Mode for Vista and Windows 7 Home Premium. Links Download XP Mode Download VirtualBox Download VMLite XP Mode Plugin for VirtualBox (Site Registration Required) Similar Articles Productive Geek Tips Search for Install Packages from the Ubuntu Command LineHow To Run XP Mode in VirtualBox on Windows 7 (sort of)Install and Use the VLC Media Player on Ubuntu LinuxInstall Monodevelop on Ubuntu LinuxInstall Flash Plugin Manually in Firefox on Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• Install XP Mode with VirtualBox Using the VMLite Plugin

  - by Mysticgeek

  Would you like to run XP Mode, but prefer Sun’s VirtualBox for virtualization?  Thanks to the free VMLite plugin, you can quickly and easily run XP Mode in or alongside VirtualBox. Yesterday we showed you one method to install XP Mode in VirtualBox, unfortunately in that situation you lose XP’s activation, and it isn’t possible to reactivate it. Today we show you a tried and true method for running XP mode in VirtualBox and integrating it seamlessly with Windows 7. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. Install XP Mode Make sure you’re logged in with Administrator rights for the entire process. The first thing you’ll want to do is install XP Mode on your system (link below). You don’t need to install Windows Virtual PC. Go through and install XP Mode using the defaults. Install VirtualBox Next you’ll need to install VirtualBox 3.1.2 or higher if it isn’t installed already. If you have an older version of VirtualBox installed, make sure to update it. During setup you’re notified that your network connection will be reset. Check the box next to Always trust software from “Sun Microsystems, Inc.” then click Install.   Setup only takes a couple of minutes, and does not require a reboot…which is always nice. Install VMLite XP Mode Plugin The next thing we’ll need to install is the VMLite XP Mode Plugin. Again Installation is simple following the install wizard. During the install like with VirtualBox you’ll be asked to install the device software. After it’s installed go to the Start menu and run VMLite Wizard as Administrator. Select the location of the XP Mode Package which by default should be in C:\Program Files\Windows XP Mode. Accept the EULA…and notice that it’s meant for Windows 7 Professional, Enterprise, and Ultimate editions. Next, name the machine, choose the install folder, and type in a password. Select if you want Automatic Updates turned on or not. Wait while the process completes then click Finish.   The VMLite XP Mode will set up to run the first time. That is all there is to this section. You can run XP Mode from within the VMLite Workstation right away. XP Mode is fully activated already, and the Guest Additions are already installed, so there’s nothing else you need to do!  XP Mode is the whole way ready to use. Integration with VirtualBox Since we installed the VMLite Plugin, when you open VirtualBox you’ll see it listed as one of your machines and you can start it up from here.   Here we see VMLite XP Mode running in Sun VirtualBox. Integrate with Windows 7 To integrate it with Windows 7 click on Machine \ Seamless Mode…   Here you can see the XP menu and Taskbar will be placed on top of Windows 7. From here you can access what you need from XP Mode.   Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. This works so seamlessly you forget if your working in XP or Windows 7. In this example we have Windows Home Server Console running in Windows 7, while installing MSE from IE 6 in XP Mode. At the top of the screen you will still have access to the VMs controls.   You can click the button to exit Seamless Mode, or simply hit the right “CTRL+L” Conclusion This is a very slick way to run XP Mode in VirtualBox on any machine that doesn’t have Hardware Virtualization. This method also doesn’t lose the XP Mode activation and is actually extremely easy to set up. If you prefer VMware (like we do), Check out how to run XP Mode on machines without Hardware Virtualization capability, and also how to create an XP Mode for Vista and Windows 7 Home Premium. Links Download XP Mode Download VirtualBox Download VMLite XP Mode Plugin for VirtualBox (Site Registration Required) Similar Articles Productive Geek Tips Search for Install Packages from the Ubuntu Command LineHow To Run XP Mode in VirtualBox on Windows 7 (sort of)Install and Use the VLC Media Player on Ubuntu LinuxInstall Monodevelop on Ubuntu LinuxInstall Flash Plugin Manually in Firefox on Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• marshal data too short!!!

  - by Nitin Garg

  My application requires to keep large data objects in session. There are like 3-4 data objects each created by parsing a csv containing 150 X 20 cells having strings of 3-4 characters. My application shows this error- "marshal data too short". I tried this- Deleting the old session table. Deleting the old migration for session table. Creating a new migration using rake db: sessions:create. editing the migration manually, changing "text: data" to "longtext: data". running the migration using rake db: migrate. now when i open my application, i see this page- link text please someone help me, this is getting on my nerves!! other details of application-- In view "index.html.erb"- There is a link that makes ajax call to an action in controller, that action parses large csv file and makes an object out of it. this object is stored in session. ERROR LOG ` ArgumentError in Scoring#index Showing app/views/scoring/index.html.erb where line #4 raised: marshal data too short Extracted source (around line #4): 1: 2: 3: 4: <%= link_to_remote "get csv file", 5: :url = { :action = 'show_static_1' }, 6: :update = "static_score", 7: :complete = "$('static_score').update(request.responseText)" % Application Trace | Framework Trace | Full Trace /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/session_store.rb:71:in load' /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/session_store.rb:71:in unmarshal' /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/session_store.rb:110:in data' /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/session_store.rb:292:in get_session' /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/base.rb:1448:in silence' /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/session_store.rb:288:in get_session' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:168:in load_session' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:62:in send' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:62:in load!' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:70:in stale_session_check!' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:61:in load!' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:28:in []' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/request_forgery_protection.rb:106:in form_authenticity_token' (eval):2:in send' (eval):2:in form_authenticity_token' app/views/scoring/index.html.erb:4:in _run_erb_app47views47scoring47index46html46erb' /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/session_store.rb:71:in load' /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/session_store.rb:71:in unmarshal' /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/session_store.rb:110:in data' /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/session_store.rb:292:in get_session' /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/base.rb:1448:in silence' /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/session_store.rb:288:in get_session' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:168:in load_session' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:62:in send' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:62:in load!' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:70:in stale_session_check!' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:61:in load!' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:28:in []' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/request_forgery_protection.rb:106:in form_authenticity_token' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_view/helpers/prototype_helper.rb:1065:in options_for_ajax' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_view/helpers/prototype_helper.rb:449:in remote_function' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_view/helpers/prototype_helper.rb:256:in link_to_remote' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_view/renderable.rb:34:in send' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_view/renderable.rb:34:in render' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_view/base.rb:306:in with_template' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_view/renderable.rb:30:in render' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_view/template.rb:205:in render_template' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_view/base.rb:265:in render' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_view/base.rb:348:in _render_with_layout' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_view/base.rb:262:in render' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:1250:in render_for_file' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:945:in render_without_benchmark' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/benchmarking.rb:51:in render' /usr/lib/ruby/gems/1.8/gems/activesupport-2.3.5/lib/active_support/core_ext/benchmark.rb:17:in ms' /usr/lib/ruby/gems/1.8/gems/activesupport-2.3.5/lib/active_support/core_ext/benchmark.rb:10:in realtime' /usr/lib/ruby/gems/1.8/gems/activesupport-2.3.5/lib/active_support/core_ext/benchmark.rb:17:in ms' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/benchmarking.rb:51:in render' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:1326:in default_render' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:1338:in perform_action_without_filters' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/filters.rb:617:in call_filters' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/filters.rb:610:in perform_action_without_benchmark' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/benchmarking.rb:68:in perform_action_without_rescue' /usr/lib/ruby/gems/1.8/gems/activesupport-2.3.5/lib/active_support/core_ext/benchmark.rb:17:in ms' /usr/lib/ruby/gems/1.8/gems/activesupport-2.3.5/lib/active_support/core_ext/benchmark.rb:10:in realtime' /usr/lib/ruby/gems/1.8/gems/activesupport-2.3.5/lib/active_support/core_ext/benchmark.rb:17:in ms' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/benchmarking.rb:68:in perform_action_without_rescue' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/rescue.rb:160:in perform_action_without_flash' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/flash.rb:146:in perform_action' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:532:in send' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:532:in process_without_filters' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/filters.rb:606:in process' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:391:in process' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:386:in call' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/routing/route_set.rb:437:in call' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:87:in dispatch' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:121:in _call' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:130:in build_middleware_stack' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/string_coercion.rb:25:in call' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/string_coercion.rb:25:in call' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/head.rb:9:in call' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/methodoverride.rb:24:in call' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/params_parser.rb:15:in call' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:122:in call' /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/query_cache.rb:29:in call' /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/query_cache.rb:34:in cache' /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/query_cache.rb:9:in cache' /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/query_cache.rb:28:in call' /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:361:in call' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/failsafe.rb:26:in call' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/lock.rb:11:in call' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/lock.rb:11:in synchronize' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/lock.rb:11:in call' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:114:in call' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/reloader.rb:34:in run' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:108:in call' /usr/lib/ruby/gems/1.8/gems/rails-2.3.5/lib/rails/rack/static.rb:31:in call' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/urlmap.rb:46:in call' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/urlmap.rb:40:in each' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/urlmap.rb:40:in call' /usr/lib/ruby/gems/1.8/gems/rails-2.3.5/lib/rails/rack/log_tailer.rb:17:in call' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/content_length.rb:13:in call' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/chunked.rb:15:in call' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/handler/mongrel.rb:64:in process' /usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb:159:in process_client' /usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb:158:in each' /usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb:158:in process_client' /usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb:285:in run' /usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb:285:in initialize' /usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb:285:in new' /usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb:285:in run' /usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb:268:in initialize' /usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb:268:in new' /usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb:268:in run' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/handler/mongrel.rb:34:in run' /usr/lib/ruby/gems/1.8/gems/rails-2.3.5/lib/commands/server.rb:111 /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:31:in gem_original_require' /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:31:in require' script/server:3 /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/session_store.rb:71:in load' /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/session_store.rb:71:in unmarshal' /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/session_store.rb:110:in data' /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/session_store.rb:292:in get_session' /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/base.rb:1448:in silence' /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/session_store.rb:288:in get_session' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:168:in load_session' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:62:in send' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:62:in load!' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:70:in stale_session_check!' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:61:in load!' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:28:in []' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/request_forgery_protection.rb:106:in form_authenticity_token' (eval):2:in send' (eval):2:in form_authenticity_token' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_view/helpers/prototype_helper.rb:1065:in options_for_ajax' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_view/helpers/prototype_helper.rb:449:in remote_function' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_view/helpers/prototype_helper.rb:256:in link_to_remote' /app/views/scoring/index.html.erb:4:in _run_erb_app47views47scoring47index46html46erb' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_view/renderable.rb:34:in send' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_view/renderable.rb:34:in render' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_view/base.rb:306:in with_template' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_view/renderable.rb:30:in render' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_view/template.rb:205:in render_template' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_view/base.rb:265:in render' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_view/base.rb:348:in _render_with_layout' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_view/base.rb:262:in render' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:1250:in render_for_file' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:945:in render_without_benchmark' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/benchmarking.rb:51:in render' /usr/lib/ruby/gems/1.8/gems/activesupport-2.3.5/lib/active_support/core_ext/benchmark.rb:17:in ms' /usr/lib/ruby/gems/1.8/gems/activesupport-2.3.5/lib/active_support/core_ext/benchmark.rb:10:in realtime' /usr/lib/ruby/gems/1.8/gems/activesupport-2.3.5/lib/active_support/core_ext/benchmark.rb:17:in ms' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/benchmarking.rb:51:in render' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:1326:in default_render' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:1338:in perform_action_without_filters' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/filters.rb:617:in call_filters' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/filters.rb:610:in perform_action_without_benchmark' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/benchmarking.rb:68:in perform_action_without_rescue' /usr/lib/ruby/gems/1.8/gems/activesupport-2.3.5/lib/active_support/core_ext/benchmark.rb:17:in ms' /usr/lib/ruby/gems/1.8/gems/activesupport-2.3.5/lib/active_support/core_ext/benchmark.rb:10:in realtime' /usr/lib/ruby/gems/1.8/gems/activesupport-2.3.5/lib/active_support/core_ext/benchmark.rb:17:in ms' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/benchmarking.rb:68:in perform_action_without_rescue' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/rescue.rb:160:in perform_action_without_flash' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/flash.rb:146:in perform_action' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:532:in send' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:532:in process_without_filters' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/filters.rb:606:in process' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:391:in process' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:386:in call' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/routing/route_set.rb:437:in call' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:87:in dispatch' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:121:in _call' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:130:in build_middleware_stack' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/string_coercion.rb:25:in call' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/string_coercion.rb:25:in call' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/head.rb:9:in call' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/methodoverride.rb:24:in call' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/params_parser.rb:15:in call' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:122:in call' /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/query_cache.rb:29:in call' /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/query_cache.rb:34:in cache' /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/query_cache.rb:9:in cache' /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/query_cache.rb:28:in call' /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:361:in call' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/failsafe.rb:26:in call' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/lock.rb:11:in call' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/lock.rb:11:in synchronize' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/lock.rb:11:in call' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:114:in call' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/reloader.rb:34:in run' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:108:in call' /usr/lib/ruby/gems/1.8/gems/rails-2.3.5/lib/rails/rack/static.rb:31:in call' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/urlmap.rb:46:in call' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/urlmap.rb:40:in each' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/urlmap.rb:40:in call' /usr/lib/ruby/gems/1.8/gems/rails-2.3.5/lib/rails/rack/log_tailer.rb:17:in call' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/content_length.rb:13:in call' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/chunked.rb:15:in call' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/handler/mongrel.rb:64:in process' /usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb:159:in process_client' /usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb:158:in each' /usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb:158:in process_client' /usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb:285:in run' /usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb:285:in initialize' /usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb:285:in new' /usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb:285:in run' /usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb:268:in initialize' /usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb:268:in new' /usr/lib/ruby/gems/1.8/gems/mongrel-1.1.5/lib/mongrel.rb:268:in run' /usr/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/handler/mongrel.rb:34:in run' /usr/lib/ruby/gems/1.8/gems/rails-2.3.5/lib/commands/server.rb:111 /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:31:in gem_original_require' /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:31:in `require' script/server:3 Request Parameters: None Show session dump Response Headers: {"Content-Type"="text/html", "Cache-Control"="no-cache"} `

  Read the article

• Ask How-To Geek: Learning the Office Ribbon, Booting to USB with an Old BIOS, and Snapping Windows

  - by Jason Fitzpatrick

  You’ve got questions and we’ve got answers. Today we highlight how to master the new Office interface, USB boot a computer with outdated BIOS, and snap windows to preset locations. Learning the New Office Ribbon Dear How-To Geek, I feel silly asking this (in light of how long the new Office interface has been out) but my company finally got around to upgrading from Windows XP and Office 2000 so the new interface it totally new to me. Can you recommend any resources for quickly learning the Office ribbon and the new changes? I feel completely lost after two decades of the old Office interface. Help! Sincerely, Where the Hell is Everything? Dear Where the Hell, We think most people were with you at some point in the last few years. “Where the hell is…” could possibly be the slogan for the new ribbon interface. You could browse through some of the dry tutorials online or even get a weighty book on the topic but the best way to learn something new is to get hands on. Ribbon Hero turns learning the new Office features and ribbon layout into a game. It’s no vigorous round of Team Fortress mind you, but it’s significantly more fun than reading a training document. Check out how to install and configure Ribbon Hero here. You’ll be teaching your coworkers new tricks in no time. Boot via USB with an Old BIOS Dear How-To Geek, I’m trying to repurpose some old computers by updating them with lightweight Linux distros but the BIOS on most of the machines is ancient and creaky. How ancient? It doesn’t even support booting from a USB device! I have a large flash drive that I’ve turned into a master installation tool for jobs like this but I can’t use it. The computers in question have USB ports; they just aren’t recognized during the boot process. What can I do? USB Bootin’ in Boise Dear USB Bootin’, It’s great you’re working to breathe life into old hardware! You’ve run into one of the limitations of older BIOSes, USB was around but nobody was thinking about booting off of it. Fortunately if you have a computer old enough to have that kind of BIOS it’s likely to also has a floppy drive or a CDROM drive. While you could make a bootable CDROM for your application we understand that you want to keep using the master USB installer you’ve made. In light of that we recommend PLoP Boot Manager. Think of it like a boot manager for your boot manager. Using it you can create a bootable floppy or CDROM that will enable USB booting of your master USB drive. Make a CD and a floppy version and you’ll have everything in your toolkit you need for future computer refurbishing projects. Read up on creating bootable media with PLoP Boot Manager here. Snapping Windows to Preset Coordinates Dear How-To Geek, Once upon a time I had a company laptop that came with a little utility that snapped windows to preset areas of the screen. This was long before the snap-to-side features in Windows 7. You could essentially configure your screen into a grid pattern of your choosing and then windows would neatly snap into those grids. I have no idea what it was called or if was anymore than a gimmick from the computer manufacturer, but I’d really like to have it on my new computer! Bend and Snap in San Francisco, Dear Bend and Snap, If we had to guess, we’d guess your company must have had a set of laptops from Acer as the program you’re describing sounds exactly like Acer GridVista. Fortunately for you the application was extremely popular and Acer released it independently of their hardware. If, by chance, you’ve since upgraded to a multiple monitor setup the app even supports multiple monitors—many of the configurations are handy for arranging IM windows and other auxiliary communication tools. Check out our guide to installing and configuring Acer GridVista here for more information. Have a question you want to put before the How-To Geek staff? Shoot us an email at [email protected] and then keep an eye out for a solution in the Ask How-To Geek column. Latest Features How-To Geek ETC How to Upgrade Windows 7 Easily (And Understand Whether You Should) The How-To Geek Guide to Audio Editing: Basic Noise Removal Install a Wii Game Loader for Easy Backups and Fast Load Times The Best of CES (Consumer Electronics Show) in 2011 The Worst of CES (Consumer Electronics Show) in 2011 HTG Projects: How to Create Your Own Custom Papercraft Toy Download the New Year in Japan Windows 7 Theme from Microsoft Once More Unto the Breach – Facebook Apps Can Now Access Your Address and Phone Number Dial Zero Speeds You Through Annoying Customer Service Menus Complete Dropquest 2011 and Receive Free Dropbox Storage Desktop Computer versus Laptop Wallpaper The Kids Have No Idea What Old Tech Is [Video]

  Read the article

• Please help rails problem with stringify_keys error

  - by richard moss

  I have been trying to solve this for ages and can't figure it out. I have a form like so (taking out a lot of other fields) <% form_for @machine_enquiry, machine_enquiry_path(@machine_enquiry) do|me_form| %> <% me_form.fields_for :messages_attributes do |f| %> <%= f.text_field :title -%> <% end %> <%= me_form.submit 'Send message' %> <% end %> And an update action like @machine_enquiry = MachineEnquiry.find(params[:id]) @machine_enquiry.update_attributes(params[:machine_enquiry] And a machine_enquiry class like so: class MachineEnquiry < ActiveRecord::Base has_many :messages, :as => :messagable, :dependent => :destroy accepts_nested_attributes_for :messages end I am getting an error like so: NoMethodError in Machine enquiriesController#update undefined method `stringify_keys' for "2":String RAILS_ROOT: C:/INSTAN~2/rails_apps/Macrotec28th Application Trace | Framework Trace | Full Trace C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/nested_attributes.rb:294:in `assign_nested_attributes_for_collection_association' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/nested_attributes.rb:293:in `each' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/nested_attributes.rb:293:in `assign_nested_attributes_for_collection_association' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/nested_attributes.rb:215:in `messages_attributes=' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/base.rb:2745:in `send' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/base.rb:2745:in `attributes=' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/base.rb:2741:in `each' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/base.rb:2741:in `attributes=' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/base.rb:2627:in `update_attributes' C:/INSTAN~2/rails_apps/Macrotec28th/app/controllers/machine_enquiries_controller.rb:74:in `update' C:/INSTAN~2/rails_apps/Macrotec28th/app/controllers/machine_enquiries_controller.rb:72:in `update' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/nested_attributes.rb:294:in `assign_nested_attributes_for_collection_association' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/nested_attributes.rb:293:in `each' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/nested_attributes.rb:293:in `assign_nested_attributes_for_collection_association' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/nested_attributes.rb:215:in `messages_attributes=' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/base.rb:2745:in `send' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/base.rb:2745:in `attributes=' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/base.rb:2741:in `each' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/base.rb:2741:in `attributes=' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/base.rb:2627:in `update_attributes' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/mime_responds.rb:106:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/mime_responds.rb:106:in `respond_to' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/base.rb:1322:in `send' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/base.rb:1322:in `perform_action_without_filters' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/filters.rb:617:in `call_filters' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/filters.rb:610:in `perform_action_without_benchmark' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/benchmarking.rb:68:in `perform_action_without_rescue' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activesupport-2.3.2/lib/active_support/core_ext/benchmark.rb:17:in `ms' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activesupport-2.3.2/lib/active_support/core_ext/benchmark.rb:10:in `realtime' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activesupport-2.3.2/lib/active_support/core_ext/benchmark.rb:17:in `ms' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/benchmarking.rb:68:in `perform_action_without_rescue' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/rescue.rb:160:in `perform_action_without_flash' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/flash.rb:141:in `perform_action' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/base.rb:523:in `send' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/base.rb:523:in `process_without_filters' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/filters.rb:606:in `process' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/base.rb:391:in `process' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/base.rb:386:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/routing/route_set.rb:433:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/dispatcher.rb:88:in `dispatch' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/dispatcher.rb:111:in `_call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/dispatcher.rb:82:in `initialize' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/query_cache.rb:29:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/query_cache.rb:29:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/connection_adapters/abstract/query_cache.rb:34:in `cache' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/query_cache.rb:9:in `cache' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/query_cache.rb:28:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/connection_adapters/abstract/connection_pool.rb:361:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/vendor/rack-1.0/rack/head.rb:9:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/vendor/rack-1.0/rack/methodoverride.rb:24:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/params_parser.rb:15:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/rewindable_input.rb:25:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/session/cookie_store.rb:93:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/reloader.rb:9:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/failsafe.rb:11:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/vendor/rack-1.0/rack/lock.rb:11:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/vendor/rack-1.0/rack/lock.rb:11:in `synchronize' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/vendor/rack-1.0/rack/lock.rb:11:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/dispatcher.rb:106:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/cgi_process.rb:44:in `dispatch_cgi' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/dispatcher.rb:102:in `dispatch_cgi' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/dispatcher.rb:28:in `dispatch' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel/rails.rb:76:in `process' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel/rails.rb:74:in `synchronize' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel/rails.rb:74:in `process' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel.rb:159:in `process_client' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel.rb:158:in `each' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel.rb:158:in `process_client' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel.rb:285:in `run' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel.rb:285:in `initialize' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel.rb:285:in `new' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel.rb:285:in `run' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel.rb:268:in `initialize' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel.rb:268:in `new' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel.rb:268:in `run' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel/configurator.rb:282:in `run' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel/configurator.rb:281:in `each' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel/configurator.rb:281:in `run' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/bin/mongrel_rails:128:in `run' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel/command.rb:212:in `run' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/bin/mongrel_rails:281 C:/INSTAN~2/ruby/bin/mongrel_rails:19:in `load' C:/INSTAN~2/ruby/bin/mongrel_rails:19 C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/nested_attributes.rb:294:in `assign_nested_attributes_for_collection_association' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/nested_attributes.rb:293:in `each' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/nested_attributes.rb:293:in `assign_nested_attributes_for_collection_association' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/nested_attributes.rb:215:in `messages_attributes=' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/base.rb:2745:in `send' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/base.rb:2745:in `attributes=' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/base.rb:2741:in `each' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/base.rb:2741:in `attributes=' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/base.rb:2627:in `update_attributes' C:/INSTAN~2/rails_apps/Macrotec28th/app/controllers/machine_enquiries_controller.rb:74:in `update' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/mime_responds.rb:106:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/mime_responds.rb:106:in `respond_to' C:/INSTAN~2/rails_apps/Macrotec28th/app/controllers/machine_enquiries_controller.rb:72:in `update' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/base.rb:1322:in `send' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/base.rb:1322:in `perform_action_without_filters' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/filters.rb:617:in `call_filters' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/filters.rb:610:in `perform_action_without_benchmark' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/benchmarking.rb:68:in `perform_action_without_rescue' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activesupport-2.3.2/lib/active_support/core_ext/benchmark.rb:17:in `ms' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activesupport-2.3.2/lib/active_support/core_ext/benchmark.rb:10:in `realtime' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activesupport-2.3.2/lib/active_support/core_ext/benchmark.rb:17:in `ms' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/benchmarking.rb:68:in `perform_action_without_rescue' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/rescue.rb:160:in `perform_action_without_flash' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/flash.rb:141:in `perform_action' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/base.rb:523:in `send' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/base.rb:523:in `process_without_filters' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/filters.rb:606:in `process' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/base.rb:391:in `process' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/base.rb:386:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/routing/route_set.rb:433:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/dispatcher.rb:88:in `dispatch' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/dispatcher.rb:111:in `_call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/dispatcher.rb:82:in `initialize' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/query_cache.rb:29:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/query_cache.rb:29:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/connection_adapters/abstract/query_cache.rb:34:in `cache' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/query_cache.rb:9:in `cache' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/query_cache.rb:28:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.2/lib/active_record/connection_adapters/abstract/connection_pool.rb:361:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/vendor/rack-1.0/rack/head.rb:9:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/vendor/rack-1.0/rack/methodoverride.rb:24:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/params_parser.rb:15:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/rewindable_input.rb:25:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/session/cookie_store.rb:93:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/reloader.rb:9:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/failsafe.rb:11:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/vendor/rack-1.0/rack/lock.rb:11:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/vendor/rack-1.0/rack/lock.rb:11:in `synchronize' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/vendor/rack-1.0/rack/lock.rb:11:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/dispatcher.rb:106:in `call' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/cgi_process.rb:44:in `dispatch_cgi' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/dispatcher.rb:102:in `dispatch_cgi' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.2/lib/action_controller/dispatcher.rb:28:in `dispatch' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel/rails.rb:76:in `process' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel/rails.rb:74:in `synchronize' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel/rails.rb:74:in `process' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel.rb:159:in `process_client' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel.rb:158:in `each' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel.rb:158:in `process_client' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel.rb:285:in `run' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel.rb:285:in `initialize' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel.rb:285:in `new' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel.rb:285:in `run' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel.rb:268:in `initialize' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel.rb:268:in `new' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel.rb:268:in `run' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel/configurator.rb:282:in `run' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel/configurator.rb:281:in `each' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel/configurator.rb:281:in `run' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/bin/mongrel_rails:128:in `run' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/lib/mongrel/command.rb:212:in `run' C:/INSTAN~2/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/bin/mongrel_rails:281 C:/INSTAN~2/ruby/bin/mongrel_rails:19:in `load' C:/INSTAN~2/ruby/bin/mongrel_rails:19 Request Parameters: {"commit"=>"Send message", "_method"=>"put", "machine_enquiry"=>{"messages_attributes"=>{"message"=>"2", "title"=>"1", "message_type_id"=>"1", "contact_detail_ids"=>["1", "11"]}}, "id"=>"2", "datetime"=>""} Why am I getting this error? Can anyone help with this?

  Read the article

• EXC_BAD_ACCESS and KERN_INVALID_ADDRESS after intiating a print sequence.

  - by Edward M. Bergmann

  MAC G4/1.5GHz/2GB/1TB+ OS10.4.11 Start up Volume has been erased/complete reinstall with updated software. Current problem only occurs when printing to an Epson Artisan 800 [USB as well as Ethernet connected] when using Macromedia FreeHand 10.0.1.67. All other apps/printers work fine. Memory has been removed/swapped/reinstalled several times, CPU was changed from 1.5GB to 1.3GB. Page(s) will print, but application quits within a second or two after selecting "print." Apple has never replied, Epson hasn't a clue, and I am befuddled!! Perhaps there is GURU out their who and see a bigger-better picture and understands how to interpret all of this stuff. If so, it would be a terrific pleasure to get a handle on how to cure this problem or get some A M M U N I T I O N to fire in the right direction. I thank you in advance. FreeHand 10 MAC OS10.4.11 unexpectedly quits after invoking a print command, the result: Date/Time: 2010-04-20 14:23:18.371 -0700 OS Version: 10.4.11 (Build 8S165) Report Version: 4 Command: FreeHand 10 Path: /Applications/Macromedia FreeHand 10.0.1.67/FreeHand 10 Parent: WindowServer [1060] Version: 10.0.1.67 (10.0.1.67, Copyright © 1988-2002 Macromedia Inc. and its licensors. All rights reserved.) PID: 1217 Thread: 0 Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0x07d7e000 Thread 0 Crashed: 0 <<00000000>> 0xffff8a60 __memcpy + 704 (cpu_capabilities.h:189) 1 FreeHand X 0x011d2994 0x1008000 + 1878420 2 FreeHand X 0x01081da4 0x1008000 + 499108 3 FreeHand X 0x010f5474 0x1008000 + 971892 4 FreeHand X 0x010d0278 0x1008000 + 819832 5 FreeHand X 0x010fa808 0x1008000 + 993288 6 FreeHand X 0x01113608 0x1008000 + 1095176 7 FreeHand X 0x01113748 0x1008000 + 1095496 8 FreeHand X 0x01099ebc 0x1008000 + 597692 9 FreeHand X 0x010fa358 0x1008000 + 992088 10 FreeHand X 0x010fa170 0x1008000 + 991600 11 FreeHand X 0x010f9830 0x1008000 + 989232 12 FreeHand X 0x01098678 0x1008000 + 591480 13 FreeHand X 0x010f7a5c 0x1008000 + 981596 Thread 1: 0 libSystem.B.dylib 0x90005dec syscall + 12 1 com.apple.OpenTransport 0x9ad015a0 BSD_waitevent + 44 2 com.apple.OpenTransport 0x9ad06360 CarbonSelectThreadFunc + 176 3 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 2: 0 libSystem.B.dylib 0x9002bfc8 semaphore_wait_signal_trap + 8 1 libSystem.B.dylib 0x90030aac pthread_cond_wait + 480 2 com.apple.OpenTransport 0x9ad01e94 CarbonOperationThreadFunc + 80 3 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 3: 0 libSystem.B.dylib 0x9002bfc8 semaphore_wait_signal_trap + 8 1 libSystem.B.dylib 0x90030aac pthread_cond_wait + 480 2 com.apple.OpenTransport 0x9ad11df0 CarbonInetOperThreadFunc + 80 3 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 4: 0 libSystem.B.dylib 0x90053f88 semaphore_timedwait_signal_trap + 8 1 libSystem.B.dylib 0x900707e8 pthread_cond_timedwait_relative_np + 556 2 ...ple.CoreServices.CarbonCore 0x90bf9330 TSWaitOnSemaphoreCommon + 176 3 ...ple.CoreServices.CarbonCore 0x90c012d0 TimerThread + 60 4 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 5: 0 libSystem.B.dylib 0x9001f48c select + 12 1 com.apple.CoreFoundation 0x907f1240 __CFSocketManager + 472 2 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 6: 0 libSystem.B.dylib 0x9002188c access + 12 1 ...e.print.framework.PrintCore 0x9169a620 CreateProxyURL(__CFURL const*) + 192 2 ...e.print.framework.PrintCore 0x9169a4f8 CreateOriginalPrinterProxyURL() + 80 3 ...e.print.framework.PrintCore 0x9169a034 CheckPrinterProxyVersion(OpaquePMPrinter*, __CFURL const*) + 192 4 ...e.print.framework.PrintCore 0x91699d94 PJCPrinterProxyCreateURL + 932 5 ...e.print.framework.PrintCore 0x916997bc PJCLaunchPrinterProxy(OpaquePMPrinter*, PMLaunchPCReason) + 32 6 ...e.print.framework.PrintCore 0x91699730 PJCLaunchPrinterProxyThread(void*) + 136 7 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 0 crashed with PPC Thread State 64: srr0: 0x00000000ffff8a60 srr1: 0x000000000200f030 vrsave: 0x00000000ff000000 cr: 0x24002244 xer: 0x0000000020000002 lr: 0x00000000011d2994 ctr: 0x00000000000003f6 r0: 0x0000000000000000 r1: 0x00000000bfffea60 r2: 0x0000000000000000 r3: 0x00000000083bb000 r4: 0x00000000083c0040 r5: 0x0000000000014d84 r6: 0x0000000000000010 r7: 0x0000000000000020 r8: 0x0000000000000030 r9: 0x0000000000000000 r10: 0x0000000000000060 r11: 0x0000000000000080 r12: 0x0000000007d7e000 r13: 0x0000000000000000 r14: 0x00000000005cbd26 r15: 0x0000000000000001 r16: 0x00000000017b03a0 r17: 0x0000000000000000 r18: 0x000000000068fa80 r19: 0x0000000000000001 r20: 0x0000000006c639c4 r21: 0x00000000006900f8 r22: 0x0000000006e09480 r23: 0x0000000006e0a250 r24: 0x0000000000000002 r25: 0x0000000000000000 r26: 0x00000000bfffed2c r27: 0x0000000006e05ce0 r28: 0x0000000000014d84 r29: 0x0000000000000000 r30: 0x0000000000014d84 r31: 0x00000000083bb000 Binary Images Description: 0x1000 - 0x2fff LaunchCFMApp /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp 0x27f000 - 0x2ce3c7 CarbonLibpwpc PEF binary: CarbonLibpwpc 0x2ce3d0 - 0x2e66bd Apple;Carbon;Multimedia PEF binary: Apple;Carbon;Multimedia 0x2e7c00 - 0x2e998b Apple;Carbon;Networking PEF binary: Apple;Carbon;Networking 0x31ab10 - 0x31abb3 CFMPriv_QuickTime PEF binary: CFMPriv_QuickTime 0x31ac20 - 0x31ac97 CFMPriv_System PEF binary: CFMPriv_System 0x31af30 - 0x31b000 CFMPriv_CarbonSound PEF binary: CFMPriv_CarbonSound 0x31b080 - 0x31b153 CFMPriv_CommonPanels PEF binary: CFMPriv_CommonPanels 0x31b230 - 0x31b2eb CFMPriv_Help PEF binary: CFMPriv_Help 0x31b2f0 - 0x31b3ba CFMPriv_HIToolbox PEF binary: CFMPriv_HIToolbox 0x31b440 - 0x31b516 CFMPriv_HTMLRendering PEF binary: CFMPriv_HTMLRendering 0x31b550 - 0x31b602 CFMPriv_CoreFoundation PEF binary: CFMPriv_CoreFoundation 0x31b7f0 - 0x31b8a5 CFMPriv_DVComponentGlue PEF binary: CFMPriv_DVComponentGlue 0x31f760 - 0x31f833 CFMPriv_ImageCapture PEF binary: CFMPriv_ImageCapture 0x31f8c0 - 0x31f9a5 CFMPriv_NavigationServices PEF binary: CFMPriv_NavigationServices 0x31fa20 - 0x31faf6 CFMPriv_OpenScripting?MacBLib PEF binary: CFMPriv_OpenScripting?MacBLib 0x31fbd0 - 0x31fc8e CFMPriv_Print PEF binary: CFMPriv_Print 0x31fcb0 - 0x31fd7d CFMPriv_SecurityHI PEF binary: CFMPriv_SecurityHI 0x31fe00 - 0x31fee2 CFMPriv_SpeechRecognition PEF binary: CFMPriv_SpeechRecognition 0x31ff60 - 0x320033 CFMPriv_CarbonCore PEF binary: CFMPriv_CarbonCore 0x3200b0 - 0x320183 CFMPriv_OSServices PEF binary: CFMPriv_OSServices 0x320260 - 0x320322 CFMPriv_AE PEF binary: CFMPriv_AE 0x320330 - 0x3203f5 CFMPriv_ATS PEF binary: CFMPriv_ATS 0x320470 - 0x320547 CFMPriv_ColorSync PEF binary: CFMPriv_ColorSync 0x3205d0 - 0x3206b3 CFMPriv_FindByContent PEF binary: CFMPriv_FindByContent 0x320730 - 0x32080a CFMPriv_HIServices PEF binary: CFMPriv_HIServices 0x320880 - 0x320960 CFMPriv_LangAnalysis PEF binary: CFMPriv_LangAnalysis 0x3209f0 - 0x320ad6 CFMPriv_LaunchServices PEF binary: CFMPriv_LaunchServices 0x320bb0 - 0x320c87 CFMPriv_PrintCore PEF binary: CFMPriv_PrintCore 0x320c90 - 0x320d52 CFMPriv_QD PEF binary: CFMPriv_QD 0x320e50 - 0x320f39 CFMPriv_SpeechSynthesis PEF binary: CFMPriv_SpeechSynthesis 0x405000 - 0x497f7a PowerPlant Shared Library PEF binary: PowerPlant Shared Library 0x498000 - 0x4f0012 Player PEF binary: Player 0x4f1000 - 0x54a4c0 KodakCMSC PEF binary: KodakCMSC 0x6bd000 - 0x6eca10 <Unknown disk fragment> PEF binary: <Unknown disk fragment> 0x7fc000 - 0x7fdb8b xRes Palette Importc PEF binary: xRes Palette Importc 0x1008000 - 0x17770a5 FreeHand X PEF binary: FreeHand X 0x17770b0 - 0x17a6fe7 MW_MSL.Carbon.Shlb PEF binary: MW_MSL.Carbon.Shlb 0x17fb000 - 0x17fff03 Smudge PEF binary: Smudge 0x5ce6000 - 0x5cecebe PICT Import Export68 PEF binary: PICT Import Export68 0x5ced000 - 0x5d24267 PNG Import Exportr68 PEF binary: PNG Import Exportr68 0x5d25000 - 0x5d30dde Release To Layerswpc PEF binary: Release To Layerswpc 0x5d31000 - 0x5d37fd2 Roughen PEF binary: Roughen 0x5d38000 - 0x5d459ae Shadow PEF binary: Shadow 0x5d46000 - 0x5d4b0de Spiral PEF binary: Spiral 0x5d4c000 - 0x5d57f07 Targa Import Export8 PEF binary: Targa Import Export8 0x5d58000 - 0x5d8d959 TIFF Import Export68 PEF binary: TIFF Import Export68 0x5d93000 - 0x5da0f65 Color Utilities PEF binary: Color Utilities 0x5f62000 - 0x5f6e795 Mirror PEF binary: Mirror 0x5f6f000 - 0x5fbd656 HTML Export PEF binary: HTML Export 0x5fc8000 - 0x5fd442f Graphic Hose PEF binary: Graphic Hose 0x5fd5000 - 0x5fe4b5a BMP Import Exportr68 PEF binary: BMP Import Exportr68 0x5fe5000 - 0x60342d6 PDF Export PEF binary: PDF Export 0x6041000 - 0x6042f44 Fractalizej@ PEF binary: Fractalizej@ 0x6043000 - 0x6075214 Chart Tool™ PEF binary: Chart Tool™ 0x6076000 - 0x607d46d Bend PEF binary: Bend 0x607e000 - 0x60cda7b PDF Import PEF binary: PDF Import 0x60dc000 - 0x60e38f2 Photoshop ImportChartCursor PEF binary: Photoshop ImportChartCursor 0x60e4000 - 0x60eb9b1 3D Rotationp PEF binary: 3D Rotationp 0x60ec000 - 0x611b458 JPEG Import ExportANEL PEF binary: JPEG Import ExportANEL 0x611c000 - 0x613d89f GIF Import Export PEF binary: GIF Import Export 0x613e000 - 0x616d7f7 Flash Export PEF binary: Flash Export 0x616e000 - 0x6175d75 Fisheye Lens PEF binary: Fisheye Lens 0x6176000 - 0x6182343 IPTC File Info PEF binary: IPTC File Info 0x6184000 - 0x6193790 PEF binary: 0x6194000 - 0x61965e5 Photoshop Palette Import PEF binary: Photoshop Palette Import 0x6197000 - 0x619c5a4 Add PointsZ PEF binary: Add PointsZ 0x619d000 - 0x61ad92b Emboss PEF binary: Emboss 0x61ae000 - 0x61be6e1 AppleScript™ Xtrawpc PEF binary: AppleScript™ Xtrawpc 0x61bf000 - 0x61d16de Navigation PEF binary: Navigation 0x61d2000 - 0x61ff94e CorelDRAW 7-8 Import PEF binary: CorelDRAW 7-8 Import 0x620a000 - 0x620d7f1 Trap PEF binary: Trap 0x620e000 - 0x62149d4 Import RGB Color Table PEF binary: Import RGB Color Table 0x6215000 - 0x6217dfe Arc PEF binary: Arc 0x6218000 - 0x62211e3 Delete Empty Text Blocks PEF binary: Delete Empty Text Blocks 0x6222000 - 0x624c8da MIX Services PEF binary: MIX Services 0x7d0b000 - 0x7d37fff com.apple.print.framework.Print.Private 4.6 (163.10) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framework/Versions/Current/Plugins/PrintCocoaUI.bundle/Contents/MacOS/PrintCocoaUI 0x7dbf000 - 0x7ddffff com.apple.print.PrintingCocoaPDEs 4.6 (163.10) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framework/Versions/A/Plugins/PrintingCocoaPDEs.bundle/Contents/MacOS/PrintingCocoaPDEs 0x7f05000 - 0x7f39fff com.epson.ijprinter.pde.PrintSetting.EP0827MSA 6.36 /Library/Printers/EPSON/InkjetPrinter/PrintingModule/EP0827MSA_Core.plugin/Contents/PDEs/PrintSetting.plugin/Contents/MacOS/PrintSetting 0x7f49000 - 0x8044fff com.epson.ijprinter.IJPFoundation 6.54 /Library/Printers/EPSON/InkjetPrinter/Libraries/IJPFoundation.framework/Versions/A/IJPFoundation 0x809a000 - 0x80cdfff com.epson.ijprinter.pde.ColorManagement.EP0827MSA 6.36 /Library/Printers/EPSON/InkjetPrinter/PrintingModule/EP0827MSA_Core.plugin/Contents/PDEs/ColorManagement.plugin/Contents/MacOS/ColorManagement 0x80dd000 - 0x8110fff com.epson.ijprinter.pde.ExpandMargin.EP0827MSA 6.36 /Library/Printers/EPSON/InkjetPrinter/PrintingModule/EP0827MSA_Core.plugin/Contents/PDEs/ExpandMargin.plugin/Contents/MacOS/ExpandMargin 0x8120000 - 0x8153fff com.epson.ijprinter.pde.ExtensionSetting.EP0827MSA 6.36 /Library/Printers/EPSON/InkjetPrinter/PrintingModule/EP0827MSA_Core.plugin/Contents/PDEs/ExtensionSetting.plugin/Contents/MacOS/ExtensionSetting 0x8163000 - 0x8196fff com.epson.ijprinter.pde.DoubleSidePrint.EP0827MSA 6.36 /Library/Printers/EPSON/InkjetPrinter/PrintingModule/EP0827MSA_Core.plugin/Contents/PDEs/DoubleSidePrint.plugin/Contents/MacOS/DoubleSidePrint 0x81a6000 - 0x81bffff com.apple.print.PrintingTiogaPDEs 4.6 (163.10) /System/Library/Frameworks/Carbon.framework/Frameworks/Print.framework/Versions/A/Plugins/PrintingTiogaPDEs.bundle/Contents/MacOS/PrintingTiogaPDEs 0x838f000 - 0x8397fff com.apple.print.converter.plugin 4.5 (163.8) /System/Library/Printers/CVs/Converter.plugin/Contents/MacOS/Converter 0x78e00000 - 0x78e07fff libLW8Utils.dylib /System/Library/Printers/Libraries/libLW8Utils.dylib 0x79200000 - 0x7923ffff libLW8Converter.dylib /System/Library/Printers/Libraries/libLW8Converter.dylib 0x8fe00000 - 0x8fe52fff dyld 46.16 /usr/lib/dyld 0x90000000 - 0x901bcfff libSystem.B.dylib /usr/lib/libSystem.B.dylib 0x90214000 - 0x90219fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib 0x9021b000 - 0x90268fff com.apple.CoreText 1.0.4 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreText.framework/Versions/A/CoreText 0x90293000 - 0x90344fff ATS /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ATS.framework/Versions/A/ATS 0x90373000 - 0x9072efff com.apple.CoreGraphics 1.258.85 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/CoreGraphics 0x907bb000 - 0x90895fff com.apple.CoreFoundation 6.4.11 (368.35) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation 0x908de000 - 0x908defff com.apple.CoreServices 10.4 (???) /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices 0x908e0000 - 0x909e2fff libicucore.A.dylib /usr/lib/libicucore.A.dylib 0x90a3c000 - 0x90ac0fff libobjc.A.dylib /usr/lib/libobjc.A.dylib 0x90aea000 - 0x90b5cfff IOKit /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit 0x90b72000 - 0x90b84fff libauto.dylib /usr/lib/libauto.dylib 0x90b8b000 - 0x90e62fff com.apple.CoreServices.CarbonCore 681.19 (681.21) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore 0x90ec8000 - 0x90f48fff com.apple.CoreServices.OSServices 4.1 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServices.framework/Versions/A/OSServices 0x90f92000 - 0x90fd4fff com.apple.CFNetwork 129.24 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwork.framework/Versions/A/CFNetwork 0x90fe9000 - 0x91001fff com.apple.WebServices 1.1.2 (1.1.0) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/WebServicesCore.framework/Versions/A/WebServicesCore 0x91011000 - 0x91092fff com.apple.SearchKit 1.0.8 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchKit.framework/Versions/A/SearchKit 0x910d8000 - 0x91101fff com.apple.Metadata 10.4.4 (121.36) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadata.framework/Versions/A/Metadata 0x91112000 - 0x91120fff libz.1.dylib /usr/lib/libz.1.dylib 0x91123000 - 0x912defff com.apple.security 4.6 (29770) /System/Library/Frameworks/Security.framework/Versions/A/Security 0x913dd000 - 0x913e6fff com.apple.DiskArbitration 2.1.2 /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration 0x913ed000 - 0x913f5fff libbsm.dylib /usr/lib/libbsm.dylib 0x913f9000 - 0x91421fff com.apple.SystemConfiguration 1.8.3 /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfiguration 0x91434000 - 0x9143ffff libgcc_s.1.dylib /usr/lib/libgcc_s.1.dylib 0x91444000 - 0x914bffff com.apple.audio.CoreAudio 3.0.5 /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio 0x914fc000 - 0x914fcfff com.apple.ApplicationServices 10.4 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/ApplicationServices 0x914fe000 - 0x91536fff com.apple.AE 312.2 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/AE.framework/Versions/A/AE 0x91551000 - 0x91623fff com.apple.ColorSync 4.4.13 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ColorSync.framework/Versions/A/ColorSync 0x91676000 - 0x91707fff com.apple.print.framework.PrintCore 4.6 (177.13) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/PrintCore.framework/Versions/A/PrintCore 0x9174e000 - 0x91805fff com.apple.QD 3.10.28 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/QD.framework/Versions/A/QD 0x91842000 - 0x918a0fff com.apple.HIServices 1.5.3 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/HIServices.framework/Versions/A/HIServices 0x918cf000 - 0x918f0fff com.apple.LangAnalysis 1.6.1 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/LangAnalysis.framework/Versions/A/LangAnalysis 0x91904000 - 0x91929fff com.apple.FindByContent 1.5 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/FindByContent.framework/Versions/A/FindByContent 0x9193c000 - 0x9197efff com.apple.LaunchServices 183.1 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/LaunchServices.framework/Versions/A/LaunchServices 0x9199a000 - 0x919aefff com.apple.speech.synthesis.framework 3.3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/SpeechSynthesis.framework/Versions/A/SpeechSynthesis 0x919bc000 - 0x91a02fff com.apple.ImageIO.framework 1.5.9 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/ImageIO 0x91a19000 - 0x91ae0fff libcrypto.0.9.7.dylib /usr/lib/libcrypto.0.9.7.dylib 0x91b2e000 - 0x91b43fff libcups.2.dylib /usr/lib/libcups.2.dylib 0x91b48000 - 0x91b66fff libJPEG.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libJPEG.dylib 0x91b6c000 - 0x91c23fff libJP2.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libJP2.dylib 0x91c72000 - 0x91c76fff libGIF.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libGIF.dylib 0x91c78000 - 0x91ce2fff libRaw.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libRaw.dylib 0x91ce7000 - 0x91d02fff libPng.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libPng.dylib 0x91d07000 - 0x91d0afff libRadiance.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libRadiance.dylib 0x91d0c000 - 0x91deafff libxml2.2.dylib /usr/lib/libxml2.2.dylib 0x91e0a000 - 0x91e48fff libTIFF.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libTIFF.dylib 0x91e4f000 - 0x91e4ffff com.apple.Accelerate 1.2.2 (Accelerate 1.2.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate 0x91e51000 - 0x91f36fff com.apple.vImage 2.4 /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.framework/Versions/A/vImage 0x91f3e000 - 0x91f5dfff com.apple.Accelerate.vecLib 3.2.2 (vecLib 3.2.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/vecLib 0x91fc9000 - 0x92037fff libvMisc.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libvMisc.dylib 0x92042000 - 0x920d7fff libvDSP.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libvDSP.dylib 0x920f1000 - 0x92679fff libBLAS.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libBLAS.dylib 0x926ac000 - 0x929d7fff libLAPACK.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libLAPACK.dylib 0x92a07000 - 0x92af5fff libiconv.2.dylib /usr/lib/libiconv.2.dylib 0x92af8000 - 0x92b80fff com.apple.DesktopServices 1.3.7 /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/DesktopServicesPriv 0x92bc1000 - 0x92df4fff com.apple.Foundation 6.4.12 (567.42) /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation 0x92f27000 - 0x92f45fff libGL.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib 0x92f50000 - 0x92faafff libGLU.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib 0x92fc8000 - 0x92fc8fff com.apple.Carbon 10.4 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon 0x92fca000 - 0x92fdefff com.apple.ImageCapture 3.0 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture.framework/Versions/A/ImageCapture 0x92ff6000 - 0x93006fff com.apple.speech.recognition.framework 3.4 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecognition.framework/Versions/A/SpeechRecognition 0x93012000 - 0x93027fff com.apple.securityhi 2.0 (203) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.framework/Versions/A/SecurityHI 0x93039000 - 0x930c0fff com.apple.ink.framework 101.2 (69) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework/Versions/A/Ink 0x930d4000 - 0x930dffff com.apple.help 1.0.3 (32) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framework/Versions/A/Help 0x930e9000 - 0x93117fff com.apple.openscripting 1.2.7 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting.framework/Versions/A/OpenScripting 0x93131000 - 0x93140fff com.apple.print.framework.Print 5.2 (192.4) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framework/Versions/A/Print 0x9314c000 - 0x931b2fff com.apple.htmlrendering 1.1.2 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering.framework/Versions/A/HTMLRendering 0x931e3000 - 0x93232fff com.apple.NavigationServices 3.4.4 (3.4.3) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationServices.framework/Versions/A/NavigationServices 0x93260000 - 0x9327dfff com.apple.audio.SoundManager 3.9 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.framework/Versions/A/CarbonSound 0x9328f000 - 0x9329cfff com.apple.CommonPanels 1.2.2 (73) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels.framework/Versions/A/CommonPanels 0x932a5000 - 0x935b3fff com.apple.HIToolbox 1.4.10 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.framework/Versions/A/HIToolbox 0x93703000 - 0x9370ffff com.apple.opengl 1.4.7 /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL 0x93714000 - 0x93734fff com.apple.DirectoryService.Framework 3.3 /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryService 0x93787000 - 0x93787fff com.apple.Cocoa 6.4 (???) /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa 0x93789000 - 0x93dbcfff com.apple.AppKit 6.4.10 (824.48) /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit 0x94149000 - 0x941bbfff com.apple.CoreData 91 (92.1) /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData 0x941f4000 - 0x942b9fff com.apple.audio.toolbox.AudioToolbox 1.4.7 /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox 0x9430c000 - 0x9430cfff com.apple.audio.units.AudioUnit 1.4 /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit 0x9430e000 - 0x944cefff com.apple.QuartzCore 1.4.12 /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore 0x94518000 - 0x94555fff libsqlite3.0.dylib /usr/lib/libsqlite3.0.dylib 0x9455d000 - 0x945adfff libGLImage.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dylib 0x945b6000 - 0x945cffff com.apple.CoreVideo 1.4.2 /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo 0x9477d000 - 0x9478cfff libCGATS.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libCGATS.A.dylib 0x94794000 - 0x947a1fff libCSync.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib 0x947a7000 - 0x947c6fff libPDFRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libPDFRIP.A.dylib 0x947e7000 - 0x94800fff libRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib 0x94807000 - 0x94b3afff com.apple.QuickTime 7.6.4 (1327.73) /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime 0x94c22000 - 0x94c93fff libstdc++.6.dylib /usr/lib/libstdc++.6.dylib 0x94e09000 - 0x94f39fff com.apple.AddressBook.framework 4.0.6 (490) /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook 0x94fcc000 - 0x94fdbfff com.apple.DSObjCWrappers.Framework 1.1 /System/Library/PrivateFrameworks/DSObjCWrappers.framework/Versions/A/DSObjCWrappers 0x94fe3000 - 0x95010fff com.apple.LDAPFramework 1.4.1 (69.0.1) /System/Library/Frameworks/LDAP.framework/Versions/A/LDAP 0x95017000 - 0x95027fff libsasl2.2.dylib /usr/lib/libsasl2.2.dylib 0x9502b000 - 0x9505afff libssl.0.9.7.dylib /usr/lib/libssl.0.9.7.dylib 0x9506a000 - 0x95087fff libresolv.9.dylib /usr/lib/libresolv.9.dylib 0x9acff000 - 0x9ad1dfff com.apple.OpenTransport 2.0 /System/Library/PrivateFrameworks/OpenTransport.framework/OpenTransport 0x9ad98000 - 0x9ad99fff com.apple.iokit.dvcomponentglue 1.7.9 /System/Library/Frameworks/DVComponentGlue.framework/Versions/A/DVComponentGlue 0x9b1db000 - 0x9b1f2fff libCFilter.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libCFilter.A.dylib 0x9c69b000 - 0x9c6bdfff libmx.A.dylib /usr/lib/libmx.A.dylib 0xeab00000 - 0xeab25fff libConverter.dylib /System/Library/Printers/Libraries/libConverter.dylib Model: PowerMac3,1, BootROM 4.2.8f1, 1 processors, PowerPC G4 (3.3), 1.3 GHz, 2 GB Graphics: ATI Radeon 7500, ATY,RV200, AGP, 32 MB Memory Module: DIMM0/J21, 512 MB, SDRAM, PC133-333 Memory Module: DIMM1/J22, 512 MB, SDRAM, PC133-333 Memory Module: DIMM2/J23, 512 MB, SDRAM, PC133-333 Memory Module: DIMM3/J24, 512 MB, SDRAM, PC133-333 Modem: Spring, UCJ, V.90, 3.0F, APPLE VERSION 0001, 4/7/1999 Network Service: Built-in Ethernet, Ethernet, en0 PCI Card: SeriTek/1V2E2 v.5.1.3,11/22/05, 23:47:18, ata, SLOT-B PCI Card: pci-bridge, pci, SLOT-C PCI Card: firewire, ieee1394, 2x8 PCI Card: usb, usb, 2x9 PCI Card: usb, usb, 2x9 PCI Card: pcie55,2928, 2x9 PCI Card: ATTO,ExpressPCIPro, scsi, SLOT-D Parallel ATA Device: MATSHITADVD-ROM SR-8585 Parallel ATA Device: IOMEGA ZIP 100 ATAPI USB Device: Hub, Up to 12 Mb/sec, 500 mA USB Device: Hub, Up to 12 Mb/sec, 500 mA USB Device: USB2.0 Hub, Up to 12 Mb/sec, 500 mA USB Device: iMic USB audio system, Griffin Technology, Inc, Up to 12 Mb/sec, 500 mA USB Device: USB Storage Device, Generic, Up to 12 Mb/sec, 500 mA USB Device: USB2.0 MFP, EPSON, Up to 12 Mb/sec, 500 mA USB Device: DYMO LabelWriter Twin Turbo, DYMO, Up to 12 Mb/sec, 500 mA USB Device: USB 2.0 CD + HDD, DMI, Up to 12 Mb/sec, 500 mA USB Device: USB2.0 Hub, Up to 12 Mb/sec, 500 mA USB Device: USB2.0 Hub, Up to 12 Mb/sec, 500 mA USB Device: iMate, USB To ADB Adaptor, Griffin Technology, Inc., Up to 1.5 Mb/sec, 500 mA USB Device: Hub in Apple Pro Keyboard, Alps Electric, Up to 12 Mb/sec, 500 mA USB Device: Griffin PowerMate, Griffin Technology, Inc., Up to 1.5 Mb/sec, 100 mA

  Read the article

• Best WordPress Video Themes for a Video Blog

  - by Matt

  WordPress has made blogging so easy & fun, there are plenty of video blog themes that you can pick from. However there is always rarity in quality. We at JustSkins have gathered some high quality, tested, tried video themes list. We tried to find some WordPress themes for vloggers, we knew all along that there are very few yet some of them are just brilliant premium wordpress themes. More on that later, let’s find out some themes which you can install on your vlog right now. On Demand 2.0 A fully featured video WordPress premium theme from Press75. Includes  theme options panel for personal customization and content management options, post thumbnails, drop down navigation menu, custom widgets and lots more. Demo | Price: $75 | DOWNLOAD VideoZoom An outstanding premium WordPress video theme from WPZoom featuring standard video integration plus additionally it lets you play any video from all the popular video websites. VideoZoom theme also includes a featured video slider on the homepage, multiple post layout options, theme options panel, WordPress 3.0 menus, backgrounds etc. Demo | Price Single: $69, Developer: $149 | DOWNLOAD Vidley Press75′s easy to use premium WordPress video theme. This theme is full of great features, it can be a perfect choice if you intend to make it a portal someday..it is scalable to shape like a news portal or portfolios. The Theme is widget ready. It has ability to place Featured Content and Featured Category section on homepage. The drop down menus on this theme are nifty! Demo | Price $75 |  DOWNLOAD Live A video premium WordPress theme designed for streaming video, and live event broadcasting. You can embed live video broadcasts from third party services like Ustream etc, and features a prominent timer counting down to the next broadcast, rotating bumper images, Facebook and twitter integration for viewer interaction, theme admin options panel and more make this theme one of its kind. Demo | Price: $99, Support License: $149| DOWNLOAD Groovy Video Woo Themes is pioneer in making beautiful wordpress themes,  One such theme that is built by keeping the video blogger in mind. The Groovy Theme is very colourful video blog premium WordPress theme. Creating video posts is quick and easy with just a copy / paste of the video’s embed code. The theme enables automatic video resizing, plenty of widgets. Also allows you to pick color of your choice. Price: Single Use $70, Developer Price : $150 | DOWNLOAD Video Flick Another exciting Video blogging theme by Press75 is the Video Flick theme. Video Flick is compatible with any video service that provides embed code, or if you want to host your own videos, Video Flick is also compatible with FLV (Flash Video) and Quicktime formats. This theme allows you to either keep standard Blog and/or have Video posts. You can pick a light or dark color option. Demo | Price : $75 | DOWNLOAD Woo Tube An excellent video premium WordPress theme from Woothemes, the WooTube theme is a very easy video blog platform, as it comes with  automatic video resizing, a completely widgetised sidebar and 7 different colour schemes to choose from. The theme  has the ability to be used as a normal blog or a gallery. A very wise choice! Price: Single Use $70, Developer Price : $150 | DOWNLOAD eVid Theme One of the nicest WordPress theme designed specifically for the video bloggers. Simple to integrate videos from video hosts such as Youtube, Vimeo, Veoh, MetaCafe etc. Demo | Price: $19 | DOWNLOAD Tubular A video premium WordPress theme from StudioPress which can also be used as a used a simple website or a blog. The theme is also available in a light color version. Demo | Price: $59.95 | DOWNLOAD Video Elements 2.0 Another beautiful video premium WordPress theme from Press75. Video Elements 2.0 has been re-designed to include the features you need to easily run and maintain a video blog on WordPress. Demo | Price: $75 | DOWNLOAD TV Elements 3.0 The theme includes a featured video carousel on the homepage which can display any number of videos, a featured category section which displays up to 12 channels, creates automatic thumbnails and a lots more… Demo | Price: $75 | DOWNLOAD Wave A beautiful premium video wordpress theme, Flexible & Super cool looking. The Design has very earthy feel to it. The theme has featured video area & latest listing on the homepage. All in all a simple design no fancy features. Demo | Price: $35 | Download

  Read the article

• Test Drive Windows 7 Online with Virtual Labs

  - by Matthew Guay

  Did you miss out on the Windows 7 public beta and want to try it out before you actually make the leap and upgrade? Maybe you want to learn how to deploy new features in a business environment. Here’s how you can test drive Windows 7 directly from your browser. Whether you manage 10,000 desktops or simply manage your own laptop, it’s usually best to test out a new OS before installing it.  If you’re upgrading from Windows XP you may find many things unfamiliar.  Microsoft has setup a special Windows 7 Test Drive website with resources to help IT professionals test and deploy Windows 7 in their workplaces.  This is a great resource to try out Windows 7 from the comfort of your browser, and look at some of the new features without even installing it. Please note that the online version is not nearly as responsive as a full standard install of Windows 7.  It also does not run the full Aero interface or desktop effects, and may refresh slowly depending on your Internet connection.  So don’t judge Windows 7’s performance based on this virtual lab, but use it as a way to learn more about Windows 7 without installing it. Getting Started To test drive Windows 7, visit Microsoft’s Windows 7 Test Drive website (link below).  You will need to run the Windows 7 Test Drive in Internet Explorer, as it requires Active X support.  We received this error when attempting to run the Test Drive in Firefox: Now, click the “Take a Test Drive” link on the bottom left of the page. This site includes several test drives to demonstrate different features of Windows 7 and its related ecosystem of products including Windows Server 2008 R2, some of which, including the XP Mode test drive, are not yet ready.  For this test, we selected the MED-V Test drive, as this includes Office 2007 and 2010 so you can test them in Windows 7 as well.  Simply select the test drive you want, and click “Try it now!”   If you haven’t run a Windows test drive before, you will be asked to install an ActiveX control.  Click the link to install. Click the yellow bar at the top of the page in Internet Explorer, and select to Install the add-on.  You may have to approve a UAC prompt to finish the install. Once this is finished, click the link on the bottom of the page to return to your test drive.  The test drive page should automatically refresh; if it doesn’t, click refresh to reload it. Now the test drive will load the components.   Once its fully loaded, click the link to launch Windows 7 in a new window. You may see a prompt warning that the server may have been impersonated.  Simply click Yes to proceed. The test lab will give you some getting started directions; click Close Window when you’re ready to try out Windows 7. Here’s the default desktop in the Windows 7 test drive.  You can use it just like a normal Windows computer, but do note that it may function slowly depending on your internet connection.   This test drive includes both Office 2007 and Office 2010 Tech Preview, so you can try out both in Windows 7 as well. You can try out the new Windows 7 applications such as the reworked Paint with the Ribbon interface from Office. Or you can even test the newest version of Media Center, though it will warn you that it may not function good with the down-scaled graphics in the test drive.   Most importantly, you can try out the new features in Windows 7, such as Jumplists and even Aero Snap.  Once again, these features will not function the quickest, but it does let you test them out. While working with the Virtual Lab, there are different tasks it walks you through. You can also download a copy of the lab manual in PDF format to help you navigate through the various objectives. The test drive system is running Microsoft Forefront Security, the enterprise security solution from which Microsoft Security Essentials has adapted components from. Conclusion These virtual labs are great for tech students, or those of you who want to get a first-hand trial of the new features. Also, if you’re not sure on how to deploy something and want to practice in a virtual environment, these labs are quite valuable.While these labs are geared toward IT professionals, it’s a good way for anyone to try out Windows 7 features from the comfort of your current computer. Test Drive Windows 7 Similar Articles Productive Geek Tips Mount Multiple ISO Images Using Virtual CloneDriveHow To Delete a VHD in Windows 7Keyboard Shortcuts for VMware WorkstationMount an ISO image in Windows 7 or VistaHow To Turn a Physical Computer Into A Virtual Machine with Disk2vhd TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 If it were only this easy SyncToy syncs Files and Folders across Computers on a Network (or partitions on the same drive) Classic Cinema Online offers 100’s of OnDemand Movies OutSync will Sync Photos of your Friends on Facebook and Outlook Windows 7 Easter Theme YoWindoW, a real time weather screensaver

  Read the article

• 8 Backup Tools Explained for Windows 7 and 8

  - by Chris Hoffman

  Backups on Windows can be confusing. Whether you’re using Windows 7 or 8, you have quite a few integrated backup tools to think about. Windows 8 made quite a few changes, too. You can also use third-party backup software, whether you want to back up to an external drive or back up your files to online storage. We won’t cover third-party tools here — just the ones built into Windows. Backup and Restore on Windows 7 Windows 7 has its own Backup and Restore feature that lets you create backups manually or on a schedule. You’ll find it under Backup and Restore in the Control Panel. The original version of Windows 8 still contained this tool, and named it Windows 7 File Recovery. This allowed former Windows 7 users to restore files from those old Windows 7 backups or keep using the familiar backup tool for a little while. Windows 7 File Recovery was removed in Windows 8.1. System Restore System Restore on both Windows 7 and 8 functions as a sort of automatic system backup feature. It creates backup copies of important system and program files on a schedule or when you perform certain tasks, such as installing a hardware driver. If system files become corrupted or your computer’s software becomes unstable, you can use System Restore to restore your system and program files from a System Restore point. This isn’t a way to back up your personal files. It’s more of a troubleshooting feature that uses backups to restore your system to its previous working state. Previous Versions on Windows 7 Windows 7′s Previous Versions feature allows you to restore older versions of files — or deleted files. These files can come from backups created with Windows 7′s Backup and Restore feature, but they can also come from System Restore points. When Windows 7 creates a System Restore point, it will sometimes contain your personal files. Previous Versions allows you to extract these personal files from restore points. This only applies to Windows 7. On Windows 8, System Restore won’t create backup copies of your personal files. The Previous Versions feature was removed on Windows 8. File History Windows 8 replaced Windows 7′s backup tools with File History, although this feature isn’t enabled by default. File History is designed to be a simple, easy way to create backups of your data files on an external drive or network location. File History replaces both Windows 7′s Backup and Previous Versions features. Windows System Restore won’t create copies of personal files on Windows 8. This means you can’t actually recover older versions of files until you enable File History yourself — it isn’t enabled by default. System Image Backups Windows also allows you to create system image backups. These are backup images of your entire operating system, including your system files, installed programs, and personal files. This feature was included in both Windows 7 and Windows 8, but it was hidden in the preview versions of Windows 8.1. After many user complaints, it was restored and is still available in the final version of Windows 8.1 — click System Image Backup on the File History Control Panel. Storage Space Mirroring Windows 8′s Storage Spaces feature allows you to set up RAID-like features in software. For example, you can use Storage Space to set up two hard disks of the same size in a mirroring configuration. They’ll appear as a single drive in Windows. When you write to this virtual drive, the files will be saved to both physical drives. If one drive fails, your files will still be available on the other drive. This isn’t a good long-term backup solution, but it is a way of ensuring you won’t lose important files if a single drive fails. Microsoft Account Settings Backup Windows 8 and 8.1 allow you to back up a variety of system settings — including personalization, desktop, and input settings. If you’re signing in with a Microsoft account, OneDrive settings backup is enabled automatically. This feature can be controlled under OneDrive > Sync settings in the PC settings app. This feature only backs up a few settings. It’s really more of a way to sync settings between devices. OneDrive Cloud Storage Microsoft hasn’t been talking much about File History since Windows 8 was released. That’s because they want people to use OneDrive instead. OneDrive — formerly known as SkyDrive — was added to the Windows desktop in Windows 8.1. Save your files here and they’ll be stored online tied to your Microsoft account. You can then sign in on any other computer, smartphone, tablet, or even via the web and access your files. Microsoft wants typical PC users “backing up” their files with OneDrive so they’ll be available on any device. You don’t have to worry about all these features. Just choose a backup strategy to ensure your files are safe if your computer’s hard disk fails you. Whether it’s an integrated backup tool or a third-party backup application, be sure to back up your files.

  Read the article

• EBS Techstack Sessions at OAUG/Collaborate 2010

  - by Steven Chan

  We have a large contingent of E-Business Suite Applications Technology Group staff rolling out to the OAUG/Collaborate 2010 conference in Las Vegas new week.  Our Applications Technology Group staff will be appearing as guest speakers or full-speakers at the following E-Business Suite technology stack related sessions:Database Special Interest GroupSunday, April 18, 11:00 AM, Breakers FSIG Leaders:  Michael Brown, Colibri; Sandra Vucinic, Vlad GroupGuest Speaker:  Steven ChanCovering database upcoming and past desupport dates, and database support policies as they apply to E-Business Suite environments, general Q&A E-Business Suite Technology Stack Special Interest GroupSunday, April 18, 3:00 PM, Breakers FSIG Leaders:  Elke Phelps, Paul Jackson, HumanaGuest Speaker:  Steven ChanCovering the latest EBS technology stack certifications, roadmap, desupport noticesupgrade options for Discoverer, OID, SSO, Portal, general Q&A E-Business Suite Applications Technology Roadmap & VisionMonday, April 19, 8:00 AM, South Seas GOracle Speaker:  Uma PrabhalaLatest developments for SOA, AOL, OAF, Web ADI, SES, AMP, ACMP, security, and other technologies Oracle E-Business Suite Applications Strategy and General Manager UpdateMonday, April 19, 2:30 PM, Mandalay Bay Ballroom DOracle Speaker:  Cliff GodwinUpdate on the entire Oracle E-Business Suite product line. The session covers the value delivered by the current release of Oracle E-Business Suite applications, the momentum, and how Oracle E-Business Suite applications integrate into Oracle's overall applications strategy 10 Things You Can Do Today to Prepare for the Next Generation ApplicationsTuesday, April 20, 8:00 AM, South Seas FOracle Speaker:  Nadia Bendjedou"Common sense" and "practical" steps that can be taken today to increase the value of your Oracle Applications (E-Business Suite, PeopleSoft, Siebel, and JDE) investments by using the latest Oracle solutions and technologiesReducing TCO using Oracle E-Business Suite Management PacksTuesday, April 20, 10:30 AM, South Seas EOracle Speaker:  Angelo RosadoLearn how you can reduce the Total Cost of Ownership by implementing Application Management Pack (AMP) and Application Change Management Pack (ACP) for E-Business Suite 11i, R12, R12.1. AMP is Oracle's next generation system manageability product offering that provides a centralized platform to manage and maintain EBS. ACP is Oracle's offering to monitor and manage E-Business Suite changes in the areas of E-Business Suite Customizations, Patches and Functional Setups. E-Business Suite Upgrade Special Interest GroupTuesday, April 20, 3:15 PM, South Seas ESIG Leaders:  John Stouffer; Sandra Vucinic, Vlad GroupGuest Speaker:  Steven ChanParticipating in general Q&A E-Business Suite Technology Essentials: Using the Latest Oracle Technologies with E-Business Suite Wednesday, April 21, 8:00 AM, South Seas HOracle Speaker:  Lisa ParekhOracle continues to build new functionality into the Oracle Database, Fusion Middleware, and Enterprise Manager. Come see how you can enhance the value of E-Business Suite for your users and lower your costs of ownership by utilizing the latest features of these Oracle technologies with E-Business Suite. Learn about the latest advanced E-Business Suite topologies and features, including new options for security, performance, third-party integration, SOA, virtualization, clouds, systems management, and much more How to Leverage the New E-Business Suite R12.1 Solutions Without Upgrading your 11.5.10 EnvironmentWednesday, April 21, 10:30 AMOracle Speaker:  Nadia Bendjedou, South Seas ELearn how you can use the latest E-Business Suite 12.1 standalone solutions without upgrading from your E-Business Suite 11.5.10 environment Web 2.0 User Experience and Oracle Fusion Middleware Integration with Oracle E-Business SuiteWednesday, April 21, 4:00 PM, South Seas FOracle Speaker:  Padmaprabodh AmbaleSee the next generation Oracle E-Business Suite OA framework improvements that will provide new rich interactions in components such as LOV, Tables and Attachments.  See  new components like the Rich Container that allows any Web 2.0 content like Flash or OBIEE to be embedded in OA Framework pages. Advanced Technology Deployment Architectures for E-Business Suite Wednesday, April 21, 2:15 PM, South Seas EOracle Speaker:  Steven ChanLearn how to take advantage of the latest version of Oracle Fusion Middleware with Oracle E-Business Suite. Learn how to utilize identity management systems and LDAP directories. In addition, come to this session for answers about advanced network deployments involving reverse proxy servers, load balancers, and DMZ's, and to see how you can take benefit from virtualization and new system management capabilities. Upgrading to Oracle E-Business Suite 12.1 - Best PracticesThursday, April 22, 11:00 AM, South Seas EOracle Speaker:  Lester Gutierrez, Udayan ParvateFundamental of upgrading to Release 12.1, which includes the technology stack components and differences, the upgrade path from various releases of Oracle E-Business Suite, upgrade steps, monitoring the upgrade, hints and tips for minimizing downtime and upgrade best practices for making the upgrade to Release 12.1 a success.  We look forward to seeing you there!

  Read the article

• Play Your Favorite DOS Games in XP, Vista, and Windows 7

  - by Matthew Guay

  Want to take a trip down memory lane with old school DOS games?  D-Fend Reloaded makes it easy for you to play your favorite DOS games directly on XP, Vista, and Windows 7. D-Fend Reloaded is a great frontend for DOSBox, the popular DOS emulator.  It lets you install and run many DOS games and applications directly from its interface without ever touching a DOS prompt.  It works great on XP, Vista, and Windows 7 32 & 64-bit versions.   Getting Started Download D-Fend Reloaded (link below), and install with the default settings.  You don’t need to install DOSBox, as D-Fend Reloaded will automatically install all the components you need to run DOS games on Windows. D-Fend Reloaded can also be installed as a portable application, so you can run it from a flash drive on any Windows computer by selecting User defined installation. Then select Portable mode installation. Once D-Fend Reloaded is installed, you can go ahead and open the program. Then simply click “Accept all settings” to apply the default settings.   D-Fend is now ready to run all of your favorite DOS games. Installing DOS Games and Applications: To install a DOS game or application, simply drag-and-drop a zip file of the app into D-Fend Reloaded’s window.  D-Fend Reloaded will automatically extract the program… Then will ask you to name the application and choose where to store it — by default it uses the name of the DOS app. Now you’ll see a new entry for the app you just installed.  Simply double-click to run it.   D-Fend will remind you that you can switch out of fullscreen mode by pressing Alt+Enter, and can also close the DOS application by pressing Ctrl+F9.  Press Ok to run the program. Here we’re running Ms. PacPC, a remake of the classic game Ms. Pac-Man, in full-screen mode.  All features work automatically, including sound, and you never have to setup anything from DOS command line — it just works. Here it’s in windowed mode running on Windows 7. Please note that your color scheme may change to Windows Basic while running DOS applications. You can run DOS application just as easily.  Here’s Word 5.5 running in in DOSBox through D-Fend Reloaded… Game Packs: Want to quickly install many old DOS freeware and trial games?  D-Fend Reloaded offers several game packs that let you install dozens of DOS games with only four clicks…just download and run the game pack installer of your choice (link below). Now you’ve got a selection of DOS games to choose from. Here’s a group of poor lemmings walking around … in Windows 7. Conclusion D-Fend Reloaded gives you a great way to run your favorite DOS games and applications directly from XP, Vista, and Windows 7.  Give it a try, and relive your DOS days from the comfort of your Windows desktop. What were some of your favorite DOS games and applications? Leave a comment and let us know. Links Download D-Fend Reloaded Download DOS game packs for D-Fend Reloaded Download Ms. Pac-PC Similar Articles Productive Geek Tips Friday Fun: Get Your Mario OnFriday Fun: Go Retro with PacmanThursday’s Pre-Holiday Lazy Links RoundupFriday Fun: Five More Time Wasting Online GamesFriday Fun: Holiday Themed Games TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional The Growth of Citibank Quickly Switch between Tabs in IE Windows Media Player 12: Tweak Video & Sound with Playback Enhancements Own a cell phone, or does a cell phone own you? Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier

  Read the article

• Silverlight Cream for December 05, 2010 -- #1003

  - by Dave Campbell

  In this (Almost) All-Submittal Issue: John Papa(-2-), Jesse Liberty, Tim Heuer, Dan Wahlin, Markus Egger, Phil Middlemiss, Coding4Fun, Michael Washington, Gill Cleeren, MichaelD!, Colin Eberhardt, Kunal Chowdhury, and Rabeeh Abla. Above the Fold: Silverlight: "Two-Way Binding on TreeView.SelectedItem" Phil Middlemiss WP7: "Taking Screen Shots of Windows Phone 7 Panorama Apps" Markus Egger Training: "Beginners Guide to Visual Studio LightSwitch (Part - 4)" Kunal Chowdhury Shoutouts: Don't let the fire go out... check out the Firestarter Labs Bart Czernicki discusses the need for 64-bit Silverlight: Why a 64-bit runtime for Silverlight 5 Matters Laurent Duveau is interviewed by the SilverlightShow folks to discuss his WP7 app: Laurent Duveau on Morse Code Flash Light WP7 Application From SilverlightCream.com: John Papa: Silverlight 5 Features John Papa has a post up highlighting his take on what's cool in the new featureset for Silverlight 5... including an external link to the keynote. Silverlight Firestarter Keynote and Sessions John Papa also has posted links to all the individual session videos... what a great resource! Yet Another Podcast #17 – Scott Guthrie Jesse Liberty went big with his latest Yet Another Podcast ... he is interviewing Scott Guthrie about the Firestarter, Silverlight, WP7. and more. Silverlight 5 Plans Revealed With this post from Tim Heuer, I find myself adding a Silverlight 5 tag... so bring on the fun! ... unless you've been overloaded like I have since last Thursday, you've probably seen this, but what the heck... Silverlight Firestarter Wrap Up and WCF RIA Services Talk Sample Code Phoenix's own Dan Wahlin had a great WCF RIA Services presentation at the Firestarter last week, and his material and lots of other good links are up on his blog, and I'd say that even if he didn't have a couple shoutouts to me in it :) Thanks Dan!! Taking Screen Shots of Windows Phone 7 Panorama Apps Markus Egger helps us all out with a post on how to get screenshots of your WP7 Panorama app... in case you haven't tried it ... it's not as easy as it sounds! Two-Way Binding on TreeView.SelectedItem Phil Middlemiss is back with a post taking some of the mystery out of the TreeView control bound to a data context and dealing with the SelectedItem property... oh yeah, and throw all that into MVVM! Great tutorial as usual, a cool behavior, and all the source. Native Extensions for Microsoft Silverlight Alan Cobb pointed me to a quick post up on the Coding4Fun site about the NESL (Native Extensions for SilverLight) from Microsoft that give access to some cool features of Windows 7 from Silverlight... I added an NESL tag in case other posts appear on this subject. Silverlight Simple Drag And Drop / Or Browse View Model / MVVM File Upload Control Michael Washington has another great tutorial up at CodeProject that expands on prior work he'd done with drag/drop file upload with this post on integrating an updated browse/upload into ViewModel/MVVM projects, all of which is Blendable. The validation story in Silverlight (Part 1) In good news for all of us, Gill Cleeren has started a tutorial series at SilverlightShow on Silverlight Validation. The first one is up discussing the basics... The Common Framework MichaelD! has a WPF/Silverlight framework up with Facebook Authentication, Xaml-driven IOC, T4 synchronous WCF proxies, and WP7 on the roadmap... source on CodePlex, check it out and give him some feedback. Exploring Reactive Extensions (Rx) through Twitter and Bing Maps Mashups If you've been waiting around to learn Rx, Colin Eberhardt has the post up for you (and me)... great tutorial up on Twitter and Bing Maps Mashups ... and all the code... for the twitter immediate app, and also the UKSnow one we showed last week... check out the demo page, and grab the source! Beginners Guide to Visual Studio LightSwitch (Part - 4) Kunal Chowdhury has the 4th part of his Lightswitch tutorial series up at SilverlightShow. In this one, he shows how to integrate multiple tables into a screen. It is here Take Your Silverlight Application Full Screen & intercept all windows keys !! Rabeeh Abla sent me this link to the blog describing a COM exposed library that intercepts all keys when Silverlight is full-screen. There are a few I hit when I'm going through blogs that Ctrl-W (FF) just won't take down and that annoys me... so this might be a solution if you have that problem... worth a look anyway! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Why Software Sucks...and What You Can Do About It – book review

  - by DigiMortal

      How do our users see the products we are writing for them and how happy they are with our work? Are they able to get their work done without fighting with cool features and crashes or are they just switching off resistance part of their brain to survive our software? Yeah, the overall picture of software usability landscape is not very nice. Okay, it is not even nice. But, fortunately, Why Software Sucks...and What You Can Do About It by David S. Platt explains everything. Why Software Sucks… is book for software users but I consider it as a-must reading also for developers and specially for their managers whose politics often kills all usability topics as soon as they may appear. For managers usability is soft topic that can be manipulated the way it is best in current state of project. Although developers are not UI designers and usability experts they are still very often forced to deal with these topics and this is how usability problems start (of course, also designers are able to produce designs that are stupid and too hard to use for users, but this blog here is about development). I found this book to be very interesting and funny reading. It is not humor book but it explains you all so you remember later very well what you just read. It took me about three evenings to go through this book and I am still enjoying what I found and how author explains our weird young working field to end users. I suggest this book to all developers – while you are demanding your management to hire or outsource usability expert you are at least causing less pain to end users. So, go and buy this book, just like I did. And… they thanks to mr. Platt :) There is one book more I suggest you to read if you are interested in usability - Don't Make Me Think: A Common Sense Approach to Web Usability, 2nd Edition by Steve Krug. Editorial review from Amazon Today’s software sucks. There’s no other good way to say it. It’s unsafe, allowing criminal programs to creep through the Internet wires into our very bedrooms. It’s unreliable, crashing when we need it most, wiping out hours or days of work with no way to get it back. And it’s hard to use, requiring large amounts of head-banging to figure out the simplest operations. It’s no secret that software sucks. You know that from personal experience, whether you use computers for work or personal tasks. In this book, programming insider David Platt explains why that’s the case and, more importantly, why it doesn’t have to be that way. And he explains it in plain, jargon-free English that’s a joy to read, using real-world examples with which you’re already familiar. In the end, he suggests what you, as a typical user, without a technical background, can do about this sad state of our software—how you, as an informed consumer, don’t have to take the abuse that bad software dishes out. As you might expect from the book’s title, Dave’s expose is laced with humor—sometimes outrageous, but always dead on. You’ll laugh out loud as you recall incidents with your own software that made you cry. You’ll slap your thigh with the same hand that so often pounded your computer desk and wished it was a bad programmer’s face. But Dave hasn’t written this book just for laughs. He’s written it to give long-overdue voice to your own discovery—that software does, indeed, suck, but it shouldn’t. Table of contents Acknowledgments xiii Introduction Chapter 1: Who’re You Calling a Dummy? Where We Came From Why It Still Sucks Today Control versus Ease of Use I Don’t Care How Your Program Works A Bad Feature and a Good One Stopping the Proceedings with Idiocy Testing on Live Animals Where We Are and What You Can Do Chapter 2: Tangled in the Web Where We Came From How It Works Why It Still Sucks Today Client-Centered Design versus Server-Centered Design Where’s My Eye Opener? It’s Obvious—Not! Splash, Flash, and Animation Testing on Live Animals What You Can Do about It Chapter 3: Keep Me Safe The Way It Was Why It Sucks Today What Programmers Need to Know, but Don’t A Human Operation Budgeting for Hassles Users Are Lazy Social Engineering Last Word on Security What You Can Do Chapter 4: Who the Heck Are You? Where We Came From Why It Still Sucks Today Incompatible Requirements OK, So Now What? Chapter 5: Who’re You Looking At? Yes, They Know You Why It Sucks More Than Ever Today Users Don’t Know Where the Risks Are What They Know First Milk You with Cookies? Privacy Policy Nonsense Covering Your Tracks The Google Conundrum Solution Chapter 6: Ten Thousand Geeks, Crazed on Jolt Cola See Them in Their Native Habitat All These Geeks Who Speaks, and When, and about What Selling It The Next Generation of Geeks—Passing It On Chapter 7: Who Are These Crazy Bastards Anyway? Homo Logicus Testosterone Poisoning Control and Contentment Making Models Geeks and Jocks Jargon Brains and Constraints Seven Habits of Geeks Chapter 8: Microsoft: Can’t Live With ’Em and Can’t Live Without ’Em They Run the World Me and Them Where We Came From Why It Sucks Today Damned if You Do, Damned if You Don’t We Love to Hate Them Plus ça Change Growing-Up Pains What You Can Do about It The Last Word Chapter 9: Doing Something About It 1. Buy 2. Tell 3. Ridicule 4. Trust 5. Organize Epilogue About the Author

  Read the article

• Edit ePub eBooks with Your Favorite HTML Editor

  - by Matthew Guay

  ePub eBooks are increasingly popular today, but often they’ve been made by converting other file formats. Here’s how you can edit ePub books to remove irregularities and make them better for reading on your devices. ePub’s are actually a zip file containing images, XHTML files with your text, and more with the .epub extension. You can make them better by editing the XHTML files directly.  Code gurus can edit the code directly, but even if you’ve never edited HTML, you can still quickly make changes with a WYSIWYG editor. Extract the Files from your ePub eBook As mentioned before, ePub files are actually renamed zip files.  So first let’s get all of the files in your ePub eBook accessible.  Find an eBook you want to edit and then change the file extension to .zip. If you don’t see the file extensions, click Organize in the menu bar and select Folder and search options. Select the View tab, and then uncheck the box beside Hide extensions for known file types.  Click Ok, and then change the file type as above. Windows will warn you about changing the file type; click Yes to proceed. Now you can browse the files of the ePub file.  Notice that it contains mostly HTML or XHTML files and images.  Click Extract all files to save them all in a folder so you can easily edit them. Alternately, you can open the ePub file directly in your favorite file archival program such as 7-zip.  Browse to the location of your ePub file, double-click it, and it’ll automatically open even if you don’t change the file extension to zip.  Now you can extract the folder, or extract individual files as before.   Edit Your eBook in KompoZer The actual ebook contents are stored in HTML or XHTML files.  These may be stored on the top folder of you ePub file’s directory, or they may be stored in \OEBPS\text in the file. To change the contents of your eBook, you’ll want to edit these files.  Often there may be separate files for each chapter, so you may have to use trial and error to find the one you need to edit.  You could edit them by hand in Windows using Notepad if you don’t have an HTML editor installed. A better option would be to use an HTML editor.  Here we’ll use the free KompoZer program to edit the files just like we’d edit a document in Word. Download KompoZer (link below), and unzip the files.  Then open the new folder and launch kompozer.exe; you don’t even need to install it.  In fact, you could even store KompoZer on a flash drive so you could edit HTML files from any computer. In KompoZer, open the HTML or XHTML file from your eBook that you want to edit. Now you can edit the file just like you would edit a document in Word.  Remove extra and unneeded text, make titles stand out, correct misspellings … anything you want!  This is especially helpful if your ePub file was created by converting a PDF as these often have many small errors. Or, if you’d rather edit the code itself, select the Source tab and edit as you wish. When you’re done making the changes, make sure to save the file in the same location with the same file name. Recreate Your Edited ePub eBook Once you’ve made all the changes you wanted, it’s time to turn this folder of files back into ePub.  Make sure you change the name of the folder if it still has the same name as the original ePub or zip file so you don’t mix them up or have trouble with overwriting the old files. Zip the folder using Windows Explorer or your favorite archival utility.  If you are using another archival program, make sure to compress it as a zip folder; other compression methods will render the ePub unreadable by your eReader app. Now change the file extension again, this time back to .epub. Now you can read your eBook with your changes in your favorite reader program or app on your mobile device. Conclusion Whether you need to remove an odd, misplaced character or need to do fine editing, using an HTML editor is a great way to make your ePub eBooks look just like you want.  Also, with an editor like KompoZer it’s not even difficult. Download KompoZer Similar Articles Productive Geek Tips Change the Default Editor From Nano on Ubuntu LinuxConvert a PDF eBook to ePub Format for Your iPad, iPhone, or eReaderRead Mobi eBooks on Kindle for PCEdit Your Firefox Bookmarks Easier with Flat Bookmark EditorChange the Default Editor for Batch Files in Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server XPS file format & XPS Viewer Explained Microsoft Office Web Apps Guide Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries Rent Cameras In Bulk At CameraRenter

  Read the article

• Integrate BING API for Search inside ASP.Net web application

  - by sreejukg

  As you might already know, Bing is the Microsoft Search engine and is getting popular day by day. Bing offers APIs that can be integrated into your website to increase your website functionality. At this moment, there are two important APIs available. They are Bing Search API Bing Maps The Search API enables you to build applications that utilize Bing’s technology. The API allows you to search multiple source types such as web; images, video etc. and supports various output prototypes such as JSON, XML, and SOAP. Also you will be able to customize the search results as you wish for your public facing website. Bing Maps API allows you to build robust applications that use Bing Maps. In this article I am going to describe, how you can integrate Bing search into your website. In order to start using Bing, First you need to sign in to http://www.bing.com/toolbox/bingdeveloper/ using your windows live credentials. Click on the Sign in button, you will be asked to enter your windows live credentials. Once signed in you will be redirected to the Developer page. Here you can create applications and get AppID for each application. Since I am a first time user, I don’t have any applications added. Click on the Add button to add a new application. You will be asked to enter certain details about your application. The fields are straight forward, only thing you need to note is the website field, here you need to enter the website address from where you are going to use this application, and this field is optional too. Of course you need to agree on the terms and conditions and then click Save. Once you click on save, the application will be created and application ID will be available for your use. Now we got the APP Id. Basically Bing supports three protocols. They are JSON, XML and SOAP. JSON is useful if you want to call the search requests directly from the browser and use JavaScript to parse the results, thus JSON is the favorite choice for AJAX application. XML is the alternative for applications that does not support SOAP, e.g. flash/ Silverlight etc. SOAP is ideal for strongly typed languages and gives a request/response object model. In this article I am going to demonstrate how to search BING API using SOAP protocol from an ASP.Net application. For the purpose of this demonstration, I am going to create an ASP.Net project and implement the search functionality in an aspx page. Open Visual Studio, navigate to File-> New Project, select ASP.Net empty web application, I named the project as “BingSearchSample”. Add a Search.aspx page to the project, once added the solution explorer will looks similar to the following. Now you need to add a web reference to the SOAP service available from Bing. To do this, from the solution explorer, right click your project, select Add Service Reference. Now the new service reference dialog will appear. In the left bottom of the dialog, you can find advanced button, click on it. Now the service reference settings dialog will appear. In the bottom left, you can find Add Web Reference button, click on it. The add web reference dialog will appear now. Enter the URL as http://api.bing.net/search.wsdl?AppID=<YourAppIDHere>&version=2.2 (replace <yourAppIDHere> with the appID you have generated previously) and click on the button next to it. This will find the web service methods available. You can change the namespace suggested by Bing, but for the purpose of this demonstration I have accepted all the default settings. Click on the Add reference button once you are done. Now the web reference to Search service will be added your project. You can find this under solution explorer of your project. Now in the Search.aspx, that you previously created, place one textbox, button and a grid view. For the purpose of this demonstration, I have given the identifiers (ID) as txtSearch, btnSearch, gvSearch respectively. The idea is to search the text entered in the text box using Bing service and show the results in the grid view. In the design view, the search.aspx looks as follows. In the search.aspx.cs page, add a using statement that points to net.bing.api. I have added the following code for button click event handler. The code is very straight forward. It just calls the service with your AppID, a query to search and a source for searching. Let us run this page and see the output when I enter Microsoft in my textbox. If you want to search a specific site, you can include the site name in the query parameter. For e.g. the following query will search the word Microsoft from www.microsoft.com website. searchRequest.Query = “site:www.microsoft.com Microsoft”; The output of this query is as follows. Integrating BING search API to your website is easy and there is no limit on the customization of the interface you can do. There is no Bing branding required so I believe this is a great option for web developers when they plan for site search.

  Read the article

• CQRS &ndash; Questions and Concerns

  - by Dylan Smith

  I’ve been doing a lot of learning on CQRS and Event Sourcing over the last little while and I have a number of questions that I haven’t been able to answer. 1. What is the benefit of CQRS when compared to a typical DDD architecture that uses Event Sourcing and properly captures intent and behavior via verb-based commands? (other than Scalability) 2. When using CQRS what do you do with complex query-based logic? I’m going to elaborate on #1 in this blog post and I’ll do a follow-up post on #2. I watched through Greg Young’s video on the business benefits of CQRS + Event Sourcing and first let me say that I thought it was an excellent presentation that really drives home a lot of the benefits to this approach to architecture (I watched it twice in a row I enjoyed it so much!). But it didn’t answer some of my questions fully (I wish I had been there to ask these of Greg in person!). So let me pick apart some of the points he makes and how they relate to my first question above. I’m completely sold on the idea of event sourcing and have a clear understanding of the benefits that it brings to the table, so I’m not going to question that. But you can use event sourcing without going to a CQRS architecture, so my main question is around the benefits of CQRS + Event Sourcing vs Event Sourcing + Typical DDD architecture Architecture with Event Sourcing + Commands on Left, CQRS on Right Greg talks about how the stereotypical architecture doesn’t support DDD, but is that only because his diagram shows DTO’s coming up from the client. If we use the same diagram but allow the client to send commands doesn’t that remove a lot of the arguments that Greg makes against the stereotypical architecture? We can now introduce verbs into the system. We can capture intent now (storing it still requires event sourcing, but you can implement event sourcing without doing CQRS) We can create a rich domain model (as opposed to an anemic domain model) Scalability is obviously a benefit that CQRS brings to the table, but like Greg says, very few of the systems we create truly need significant scalability Greg talks about the ability to scale your development efforts. He says CQRS allows you to split the system into 3 parts (Client, Domain/Commands, Reads) and assign 3 teams of developers to work on them in parallel; letting you scale your development efforts by 3x with nearly linear gains. But in the stereotypical architecture don’t you already have 2 separate modules that you can split your dev efforts between: The client that sends commands/queries and receives DTO’s, and the Domain which accepts commands/queries, and generates events/DTO’s. If this is true it’s not really a 3x scaling you achieve with CQRS but merely a 1.5x scaling which while great doesn’t sound nearly as dramatic (“I can do it with 10 devs in 12 months – let me hire 5 more and we can have it done in 8 months”). Making the Query side “stupid simple” such that you can assign junior developers (or even outsource it) sounds like a valid benefit, but I have some concerns over what you do with complex query-based logic/behavior. I’m going to go into more detail on this in a follow-up blog post shortly. He also seemed to focus on how “stupid-simple” it is doing queries against the de-normalized data store, but I imagine there is still significant complexity in the event handlers that interpret the events and apply them to the de-normalized tables. It sounds like Greg suggests that because we’re doing CQRS that allows us to apply Event Sourcing when we otherwise wouldn’t be able to (~33:30 in the video). I don’t believe this is true. I don’t see why you wouldn’t be able to apply Event Sourcing without separating out the Commands and Queries. The queries would just operate against the domain model instead of the database. But you’d still get the benefits of Event Sourcing. Without CQRS the queries would only be able to operate against the current state rather than the event history, but even in CQRS the domain behaviors can only operate against the current state and I don’t see that being a big limiting factor. If some query needs to operate against something that is not captured by the current state you would just have to update the domain model to capture that information (no different than if that statement were made about a Command under CQRS). Some of the benefits I do see being applicable are that your domain model might end up being simpler/smaller since it only needs to represent the state needed to process commands and not worry about the reads (like the Deactivate Inventory Item and associated comment example that Greg provides). And also commands that can be handled in a Transaction Script style manner by the command handler simply generating events and not touching the domain model. It also makes it easier for your senior developers to focus on the command behavior and ignore the queries, which is usually going to be a better use of their time. And of course scalability. If anybody out there has any thoughts on this and can help educate me further, please either leave a comment or feel free to get in touch with me via email:

  Read the article

• Make a Drive Image Using an Ubuntu Live CD

  - by Trevor Bekolay

  Cloning a hard drive is useful, but what if you have to make several copies, or you just want to make a complete backup of a hard drive? Drive images let you put everything, and we mean everything, from your hard drive in one big file. With an Ubuntu Live CD, this is a simple process – the versatile tool dd can do this for us right out of the box. We’ve used dd to clone a hard drive before. Making a drive image is very similar, except instead of copying data from one hard drive to another, we copy from a hard drive to a file. Drive images are more flexible, as you can do what you please with the data once you’ve pulled it off the source drive. Your drive image is going to be a big file, depending on the size of your source drive – dd will copy every bit of it, even if there’s only one tiny file stored on the whole hard drive. So, to start, make sure you have a device connected to your computer that will be large enough to hold the drive image. Some ideas for places to store the drive image, and how to connect to them in an Ubuntu Live CD, can be found at this previous Live CD article. In this article, we’re going to make an image of a 1GB drive, and store it on another hard drive in the same PC. Note: always be cautious when using dd, as it’s very easy to completely wipe out a drive, as we will show later in this article. Creating a Drive Image Boot up into the Ubuntu Live CD environment. Since we’re going to store the drive image on a local hard drive, we first have to mount it. Click on Places and then the location that you want to store the image on – in our case, a 136GB internal drive. Open a terminal window (Applications > Accessories > Terminal) and navigate to the newly mounted drive. All mounted drives should be in /media, so we’ll use the command cd /media and then type the first few letters of our difficult-to-type drive, press tab to auto-complete the name, and switch to that directory. If you wish to place the drive image in a specific folder, then navigate to it now. We’ll just place our drive image in the root of our mounted drive. The next step is to determine the identifier for the drive you want to make an image of. In the terminal window, type in the command sudo fdisk -l Our 1GB drive is /dev/sda, so we make a note of that. Now we’ll use dd to make the image. The invocation is sudo dd if=/dev/sda of=./OldHD.img This means that we want to copy from the input file (“if”) /dev/sda (our source drive) to the output file (“of”) OldHD.img, which is located in the current working directory (that’s the “.” portion of the “of” string). It takes some time, but our image has been created…Let’s test to make sure it works. Drive Image Testing: Wiping the Drive Another interesting thing that dd can do is totally wipe out the data on a drive (a process we’ve covered before). The command for that is sudo dd if=/dev/urandom of=/dev/sda This takes some random data as input, and outputs it to our drive, /dev/sda. If we examine the drive now using sudo fdisk –l, we can see that the drive is, indeed, wiped. Drive Image Testing: Restoring the Drive Image We can restore our drive image with a call to dd that’s very similar to how we created the image. The only difference is that the image is going to be out input file, and the drive now our output file. The exact invocation is sudo dd if=./OldHD.img of=/dev/sda It takes a while, but when it’s finished, we can confirm with sudo fdisk –l that our drive is back to the way it used to be! Conclusion There are a lots of reasons to create a drive image, with backup being the most obvious. Fortunately, with dd creating a drive image only takes one line in a terminal window – if you’ve got an Ubuntu Live CD handy! Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDCreate a Bootable Ubuntu USB Flash Drive the Easy WayHow to Browse Without a Trace with an Ubuntu Live CDWipe, Delete, and Securely Destroy Your Hard Drive’s Data the Easy WayClone a Hard Drive Using an Ubuntu Live CD TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Microsoft Office Web Apps Guide Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries Rent Cameras In Bulk At CameraRenter Download Songs From MySpace

  Read the article

• HR According to Batman

  - by D'Arcy Lussier

  Any idea who that guy is running alongside the Caped Crusader? That’s Nightwing, but you may know him as Robin…well, the first Robin anyway. There were actually like 5 Robin’s according to Wikipedia: Dick Grayson, the original, who’s parents were circus performers killed by a gangster. Jason Todd, who was caught trying to steal tires off of the Batmobile. Tim Drake, who saw Dick’s parents die and figured out who Batman and Robin were. and a few others that get into recent time travel/altered reality storylines. What does this have to do with HR? Well, it somewhat ties in with an article by Alex Papadimoulis from 2008. In the article he talks about the “Cravath System”. The Craveth system was developed by a law firm called Cravath, Swaine & Moore back in the 19th century. In a nutshell, they believed in hiring the best and brightest straight out of school. These aspiring lawyers would then begin a fight for survival in the firm, with the strong surviving. In what’s termed the “Up and Out” rule, employees needed to be promoted within 3 years or leave the company. They should achieve partner within 7 – 8 years and no later than 10 after initially coming on board (read all about the system on Wikipedia here). Back to Alex’s article, he quotes from a book published in 1947 about the lawfirm: Under the “Cravath system” of taking a substantial number of men annually and keeping a current constantly moving up in the office, and its philosophy of tenure, men are constantly leaving… it is often difficult to keep the best men long enough to determine whether they shall be made partners, for Cravath-trained men are always in demand, usually at premium salaries. And so we see a pattern forming here: 1. Hire a whole whack of smart college graduates 2. Put them to work 3. The ones that stick around should move up the ladder. The ones that don’t stick around served the company well and left to expound the quality of the Cravath firm. Those that didn’t fall into either of those categories were just let go. There’s some interesting undercurrents to these ideas. If you stick around, you better keep your feet moving! I was at a Microsoft shindig a few months back, and was talking to a Microsoft employee. He shared that at MS you have 5 years to achieve a “senior” position within the company. Once you hit that mark, you can stay there for the rest of your career (he told about a guy who’s a “senior” developer and has been for the last 20+ years working on audio drivers for Windows), but you *must* hit that mark within the timeframe. What we see with Microsoft is Cravath’s system in action, whether intentional or not: bring in smart young people and see which ones stick. You need to give people something to work towards. Saying “You must reach this level or else!” is one way to look at it. The other way is to see achieving a higher rank in the organization as something for ambitious employees to reach towards. It’s important for an organization to always have the next generation of executives waiting in the wings, and unless you’re encouraging that early on you may find yourself in a position of needing to fill positions that nobody has been working towards. Now, you might suggest that this isn’t that big of a deal because you could just hire someone from outside the organization, but the Cravath system holds to the tenet of promoting internally; develop your own talent, since your business is the best place for the future leadership to learn teh business from. It’s OK for people to quit. Alex’s article really drives this point home, but its worth noting here also: its OK for your people to quit. In fact its inevitable…and more inevitable that it’ll be good people that leave. Some will stay and work towards the internal awards of promotion, but a number will get experience, serve the organization well, and then move on to something else. This should be expected and treated as a natural business occurrence. The idea of an alumni of an organization begins to come into play here: “That guy used to work for <insert company here>”. There’s a benefit in that: those best and brightest will be drawn to your organization and your reputation will permeate your market through former staff that are sought after because of how well you nurtured them. The Batman Hook All of this brings us back to Batman and his HR practice: when Dick decided he’d had enough of the Robin schtick, he quit and became his own…but he was always associated with Batman and people understood where his training had come from. To the Dark Knight’s credit, he continued training partners under the Robin brand. Luckily he didn’t have to worry about firing any of them (the ship sort of sails when you reveal a secret identity), although there was that unfortunate “quitting” of the second Robin when the Joker blew him up…but regardless, we see the Cravath system at work: bring in talent, expect great things, and be ok with whatever they decide for their careers. It’s an interesting way to approach HR, and luckily for us our business isn’t as dangerous or over-the-top as the caped crusader’s.

  Read the article

• Going to the Score Cards - Exceptional DBA Awards 2011

  - by Rodney

  This year marks my 4th year as a judge for the Exceptional DBA Awards, founded by Red Gate in 2008 to "recognize the essential but often overlooked contributions of DBAs, the unsung heroes of the IT community." As a professional DBA myself I have been honored to participate as a judge. It is not an easy job because there is a voluminous amount of nominees from all over the world. Each judge has to read through every word of the nominee's answers, deciding what makes each person special and stand out amongst their peers. What drives them? What single element of their submission will shine above all others? It is my hope that what I am about to divulge to you as a judge will prompt you to think about yourself or someone you know and decide that you may be the exceptional DBA who can take home the gold at this year's award ceremony in Seattle. We are more than a few weeks into the nomination process and there are quite a number of submissions already. I can not tell you how many as that would not be fair. I can say it is not 1 million or more. I can also say that it is not 100,000. But that is all I can say about that. However, I can tell you that it is enough this year that we are breaking records on the number of people who have been influenced, inspired or intrigued by the awards in the past. I remember them all like it were yesterday. fuzzy thought cloud here. It was a rainy day in Seattle (all memories for each award ceremony will start thusly) and I was in the hotel going over my notes on what I wanted to say about the winner of the 2008 Red Gate Exceptional DBA Award. The notes were on index cards that I had either bought or stolen from my wife, I do not recall, but I was nervous which was unlike me. This was, after all, a big night for the winner. Of course, we, the judges and the SQL community, had already decided the winner and now all that remained was to present the award. The room was packed. It was Casino night, sponsored by sqlservercentral.com. Money (fake), drinks (not fake) and camaraderie flowed through the room. Dan McClain won the award that year. He worked for Anheuser-Busch at the time. I promise that did not influence my decision. We presented Dan with the award. He was very proud of this achievement, rightfully so, as was the SQL community for him. I spoke with Dan throughout the conference and realized how huge this award was for him, not just personally but professionally. It was a rainy day in Seattle in 2009 and I was nervous. I was asked to speak to a group of people again as a judge for the Exceptional DBA Awards. This year, Josef Richberg would be the recipient of the award, but he would not be able to attend. We all prayed for him as he fought through an illness and congratulated him for his accomplishments as a DBA for his company. He got better and sallied forth and continued to give back to the SQL community that he saw as one big family. In 2010, and I am getting ahead of myself, he was asked to be a judge himself for the very award he had just received the year before. It was a sunny day in Seattle and I missed it, because it was in July and I was not there. It was a rainy day in Seattle and it is 2010 and Tracy Hamlin enters a submission that blows this judge away. She is managing a 50 Terabyte distributed database ("50 Gigabytes! Are you kidding me!!!", Rodney jokes.)  and loves her daily job as a DBA working with developers, mentoring them and teaching them best practices with kindness and patience. She is a people person who just happens to have 10+ years experience with RDBMS'. She wins the award and goes on to be recognized as famous at PASS. It will be a rainy day in Seattle this year when I sit amongst my old constituent judges and friends, Brad McGehee, http://www.simple-talk.com/books/sql-books/how-to-become-an-exceptional-dba,-2nd-edition/, Steve Jones, whom we all know and love at http://www.sqlservercentral.com and a young upstart to the SQL Community, this cat named Brent Ozar to announce the 2011 winner. I personally have not heard of Brent but I am told I have interviewed him for a DBA position several years ago and turned him down, http://www.brentozar.com/archive/2011/05/exceptional-dba-contest/ . I hope that did not jeopardize his future in the SQL world. I am a big hearted oaf and would feel horrible. Hopefully I will meet him at PASS and we can work this all out and I can help him get a DBA job. The rain has stopped and a new year is upon us. The stakes are high...the competition is fierce...the rewards are incredible. The entry form awaits you. http://www.exceptionaldba.com/ I very much look forward to meeting you and presenting the award to you in front of hundreds of your envious but proud peers as the new Exceptional DBA for 2011 at the PASS Summit. Here is what you could win: The Exceptional DBA of the Year receives full conference registration for the 2011 PSS Summit in Seattle, where the awards ceremony will take place, four nights' hotel accommodation, and $300 towards travel expenses. They will also be featured on Simple-Talk. Are you ready? Are you nervous?

  Read the article

< Previous Page | 364 365 366 367 368 369 370 371 372 373 374 375  | Next Page >