Search Results

Search found 9944 results on 398 pages for 'plan explorer'.

Page 368/398 | < Previous Page | 364 365 366 367 368 369 370 371 372 373 374 375  | Next Page >

• DBCC CHECKDB (BatmanDb, REPAIR_ALLOW_DATA_LOSS) &ndash; Are you Feeling Lucky?

  - by David Totzke

  I’m currently working for a client on a PowerBuilder to WPF migration.  It’s one of those “I could tell you, but I’d have to kill you” kind of clients and the quick-lime pits are currently occupied by the EMC tech…but I’ve said too much already. At approximately 3 or 4 pm that day users of the Batman[1] application here in Gotham[1] started to experience problems accessing the application.  Batman[2] is a document management system here that also integrates with the ERP system.  Very little goes on here that doesn’t involve Batman in some way.  The errors being received seemed to point to network issues (TCP protocol error, connection forcibly closed by the remote host etc…) but the real issue was much more insidious. Connecting to the database via SSMS and performing selects on certain tables underlying the application areas that were having problems started to reveal the issue.  You couldn’t do a SELECT * FROM MyTable without it bombing and giving the same error noted above.  A run of DBCC CHECKDB revealed 14 tables with corruption.  One of the tables with issues was the Document table.  Pretty central to a “document management” system.  Information was obtained from IT that a single drive in the SAN went bad in the night.  A new drive was in place and was working fine.  The partition that held the Batman database is configured for RAID Level 5 so a single drive failure shouldn’t have caused any trouble and yet, the database is corrupted.  They do hourly incremental backups here so the first thing done was to try a restore.  A restore of the most recent backup failed so they worked backwards until they hit a good point.  This successful restore was for a backup at 3AM – a full day behind.  This time also roughly corresponds with the time the SAN started to report the drive failure.  The plot thickens… I got my hands on the output from DBCC CHECKDB and noticed a pattern.  What’s sad is that nobody that should have noticed the pattern in the DBCC output did notice.  There was a rush to do things to try and recover the data before anybody really understood what was wrong with it in the first place.  Cooler heads must prevail in these circumstances and some investigation should be done and a plan of action laid out or you could end up making things worse[3].  DBCC CHECKDB also told us that: repair_allow_data_loss is the minimum repair level for the errors found by DBCC CHECKDB Yikes.  That means that the database is so messed up that you’re definitely going to lose some stuff when you repair it to get it back to a consistent state.  All the more reason to do a little more investigation into the problem.  Rescuing this database is preferable to having to export all of the data possible from this database into a new one.  This is a fifteen year old application with about seven hundred tables.  There are TRIGGERS everywhere not to mention the referential integrity constraints to deal with.  Only fourteen of the tables have an issue.  We have a good backup that is missing the last 24 hours of business which means we could have a “do-over” of yesterday but that’s not a very palatable option either. All of the affected tables had TEXT columns and all of the errors were about LOB data types and orphaned off-row data which basically means TEXT, IMAGE or NTEXT columns.  If we did a SELECT on an affected table and excluded those columns, we got all of the rows.  We exported that data into a separate database.  Things are looking up.  Working on a copy of the production database we then ran DBCC CHECKDB with REPAIR_ALLOW_DATA_LOSS and that “fixed” everything up.   The allow data loss option will delete the bad rows.  This isn’t too horrible as we have all of those rows minus the text fields from out earlier export.  Now I could LEFT JOIN to the exported data to find the missing rows and INSERT them minus the TEXT column data. We had the restored data from the good 3AM backup that we could now JOIN to and, with fingers crossed, recover the missing TEXT column information.  We got lucky in that all of the affected rows were old and in the end we didn’t lose anything.  :O  All of the row counts along the way worked out and it looks like we dodged a major bullet here. We’ve heard back from EMC and it turns out the SAN firmware that they were running here is apparently buggy.  This thing is only a couple of months old.  Grrr…. They dispatched a technician that night to come and update it .  That explains why RAID didn’t save us. All-in-all this could have been a lot worse.  Given the root cause here, they basically won the lottery in not losing anything. Here are a few links to some helpful posts on the SQL Server Engine blog.  I love the title of the first one: Which part of 'REPAIR_ALLOW_DATA_LOSS' isn't clear? CHECKDB (Part 8): Can repair fix everything? (in fact, read the whole series) Ta da! Emergency mode repair (we didn’t have to resort to this one thank goodness)   Dave Just because I can…   [1] Names have been changed to protect the guilty. [2] I'm Batman. [3] And if I'm the coolest head in the room, you've got even bigger problems...

  Read the article

• Persisting settings without using Options dialog in Visual Studio

  - by Utkarsh Shigihalli

  Originally posted on: http://geekswithblogs.net/onlyutkarsh/archive/2013/11/02/persisting-settings-without-using-options-dialog-in-visual-studio.aspxIn one of my previous blog post we have seen persisting settings using Visual Studio's options dialog. Visual Studio options has many advantages in automatically persisting user options for you. However, during our latest Team Rooms extension development, we decided to provide our users; ability to use our preferences directly from Team Explorer. The main reason was that we had only one simple option for user and we thought it is cumbersome for user to go to Tools –> Options dialog to change this. Another reason was, we wanted to highlight this setting to user as soon as he is using our extension.   So if you are in such a scenario where you do not want to use VS options window, but still would like to persist the settings, this post will guide you through. Visual Studio SDK provides two ways to persist settings in your extensions. One is using DialogPage as shown in my previous post. Another way is to use by implementing IProfileManager interface which I will explain in this post. Please note that the class implementing IProfileManager should be independent class. This is because, VS instantiates this class during Tools –> Import and Export Settings. IProfileManager provides 2 different sets of methods (total 4 methods) to persist the settings. They are LoadSettingsFromXml and SaveSettingsToXml – Implement these methods to persist settings to disk from VS settings storage. The VS will persist your settings along with other options to disk. LoadSettingsFromStorage and SaveSettingsToStorage – Implement these methods to persist settings to local storage, usually it be registry. VS calls LoadSettingsFromStorage method when it is initializing the package too. We are going to use the 2nd set of methods for this example. First, we are creating a separate class file called UserOptions.cs. Please note that, we also need to implement IComponent, which can be done by inheriting Component along with IProfileManager. [ComVisible(true)] [Guid("XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX")] public class UserOptions : Component, IProfileManager { private const string SUBKEY_NAME = "TForVS2013"; private const string TRAY_NOTIFICATIONS_STRING = "TrayNotifications"; ... } Define the property so that it can be used to set and get from other classes. public bool TrayNotifications { get; set; } Implement the members of IProfileManager. public void LoadSettingsFromStorage() { RegistryKey reg = null; try { using (reg = Package.UserRegistryRoot.OpenSubKey(SUBKEY_NAME)) { if (reg != null) { // Key already exists, so just update this setting. TrayNotifications = Convert.ToBoolean(reg.GetValue(TRAY_NOTIFICATIONS_STRING, true)); } } } catch (TeamRoomException exception) { TrayNotifications = true; ExceptionReporting.Report(exception); } finally { if (reg != null) { reg.Close(); } } } public void LoadSettingsFromXml(IVsSettingsReader reader) { reader.ReadSettingBoolean(TRAY_NOTIFICATIONS_STRING, out _isTrayNotificationsEnabled); TrayNotifications = (_isTrayNotificationsEnabled == 1); } public void ResetSettings() { } public void SaveSettingsToStorage() { RegistryKey reg = null; try { using (reg = Package.UserRegistryRoot.OpenSubKey(SUBKEY_NAME, true)) { if (reg != null) { // Key already exists, so just update this setting. reg.SetValue(TRAY_NOTIFICATIONS_STRING, TrayNotifications); } else { reg = Package.UserRegistryRoot.CreateSubKey(SUBKEY_NAME); reg.SetValue(TRAY_NOTIFICATIONS_STRING, TrayNotifications); } } } catch (TeamRoomException exception) { ExceptionReporting.Report(exception); } finally { if (reg != null) { reg.Close(); } } } public void SaveSettingsToXml(IVsSettingsWriter writer) { writer.WriteSettingBoolean(TRAY_NOTIFICATIONS_STRING, TrayNotifications ? 1 : 0); } Let me elaborate on the method implementation. The Package class provides UserRegistryRoot (which is HKCU\Microsoft\VisualStudio\12.0 for VS2013) property which can be used to create and read the registry keys. So basically, in the methods above, I am checking if the registry key exists already and if not, I simply create it. Also, in case there is an exception I return the default values. If the key already exists, I update the value. Also, note that you need to make sure that you close the key while exiting from the method. Very simple right? Accessing and settings is simple too. We just need to use the exposed property. UserOptions.TrayNotifications = true; UserOptions.SaveSettingsToStorage(); Reading settings is as simple as reading a property. UserOptions.LoadSettingsFromStorage(); var trayNotifications = UserOptions.TrayNotifications; Lastly, the most important step. We need to tell Visual Studio shell that our package exposes options using the UserOptions class. For this we need to decorate our package class with ProvideProfile attribute as below. [ProvideProfile(typeof(UserOptions), "TForVS2013", "TeamRooms", 110, 110, false, DescriptionResourceID = 401)] public sealed class TeamRooms : Microsoft.VisualStudio.Shell.Package { ... } That's it. If everything is alright, once you run the package you will also see your options appearing in "Import Export settings" window, which allows you to export your options.

  Read the article

• Oracle Business Intelligence Advanced - Hands-on Workshop para Parceiros - 18 a 21 de Janeiro

  - by Claudia Costa

  Workshop Description This FREE hands-on workshop highlights strengths of OBIEE 11g by providing attendees a hands-on experience with BI 11g product. OBIEE 11g has adopted the standardized infrastructure of Fusion Middleware to provide robust server capability along with highly anticipated advanced visualization components like Maps, Flash based charts, Scorecards and KPIs. This workshop focuses on new features and infrastructure components for the BI practitioners who are familiar with either OBIEE 10g or previous BI releases. After taking this course, Oracle Business Intelligence 11g Advanced, you will gain insight into OBIEE11g technology, reporting solutions and new features. Workshop provides opportunities to practice with OBIEE11g environment as hands on activities. Participant will gain in-depth understanding of new architecture of OBIEE 11g, security mode, installation/configuration as well as reporting aspects like, new ROLAP/MOLAP style hierarchical browsing, new chart types, Action Framework and Advanced Visualization. If you are a Business Intelligence practitioners and familiar with BI10g - you cannot afford to miss this 3-day workshop. Register Now! PresentationsBusiness Intelligence EE (OBIEE) 11g: Advanced Workshop ·         OBIEE 11g Overview ·         OBIEE 11g Architecture and Infrastructure ·         OBIEE 11g Installation, Configuration and Monitoring ·         OBIEE11g Security Model and BI Components ·         OBIEE 11g Homepage Overview ·         New Visualizations: Master-Detail Events, Charts, Hierarchies ·         Reports Building with OBIEE 11g and Catalog Management ·         Spatial Integration, Action Framework, Scorecards ·         OBIEE 11g Dashboards ·         OBIEE Integration Options  Lab OutlineOracle Business Intelligence (OBIEE) 11g: Advanced Workshop The labs enable OBIEE Core functionality through hands-on activities are based on a Oracle VirtualBox image with software and training samples pre-installed. This Advanced course has few labs optional during the workshop to allow for students to practice them on their own. The primary purpose of the workshop is to provide expertise of 11g features and infrastructure changes from 10g. Labs will allow you to explore concepts to: ·         Have a clear understanding of the OBIEE 11g architecture ·         Have a clear understanding of the OBIEE differentiators ·         OBIEE11g Security Model ·         OBIEE11g Environment Management ·         Report Building with OBIEE11g ·         OBIEE11g Dashboard and Homepage Environment ·         New Visualization features ·         Management of Reports, Dashboards and BI Catalog Objects Audience ·         Business Intelligence Evangelist ·         Business Intelligence Application Developer or Consultant ·         Data Warehouse Developer ·         Enterprise Architects ·         Industry Solutions Architects Prerequisites ·         Experience and Understanding of OBIEE 10g is required. ·         Good understanding of data modeling for reporting purpose ·         Strong experience with database technologies preferred Equipment RequirementsThis workshop requires attendees to provide their own laptops. Attendee laptops must meet the following minimum hardware/software requirements: OBIEE 11g environments requires at least 3 GB of RAM (4GB Preferred), without which student will not be able to complete labs. This workshop has environment that includes VM Image and also a software components that students will install on their laptop for the labs. ·         Minimum 3GB RAM. 25GB free disk space ·         Internet Explorer 7 ·         VirtualBox (the latest version) ·         Downloadable from http://www.virtualbox.org ·         WINRAR or 7zip ·         Downloadable from http://www.win-rar.com/download.html ·         Downloadable from http://www.7zip.com/ Attendees will be given a VirtualBox image for Oraclee BI 11g Workshop containing the software along with required toolset, database and data sets for the labs. AgendaThis class duration is 3 Days9:00am: Sign-in and Technical Set up9:30am : Workshop Starts5:00pm : Workhop Ends LocalHotel Holiday Inn Express - Porto Salvo - Lisboa This class is Free. Register early to confirm a seat! Oracle BI Advanced 11g Hands-on Workshop - Schedule Register Now! January 11-13, 2011: Kista, Sweden January 18-20, 2011: Lisbon, Portugal March 1-3, 2011: Reading, Berkshire, UK March 15-17, 2011: Colombes, Paris, France March 29-31, 2011: Amsterdam, Netherlands Questions? For registration questions please send an email to [email protected]. Para outras informações, por favor contacte Claudia Costa, telf: 214235027 ou pelo email   

  Read the article

• 3 Ways to Make Steam Even Faster

  - by Chris Hoffman

  Have you ever noticed how slow Steam’s built-in web browser can be? Do you struggle with slow download speeds? Or is Steam just slow in general? These tips will help you speed it up. Steam isn’t a game itself, so there are no 3D settings to change to achieve maximum performance. But there are some things you can do to speed it up dramatically. Speed Up the Steam Web Browser Steam’s built-in web browser — used in both the Steam store and in Steam’s in-game overlay to provide a web browser you can quickly use within games – can be frustratingly slow on many systems. Rather than the typical speed we’ve come to expect from Chrome, Firefox, or even Internet Explorer, Steam seems to struggle. When you click a link or go to a new page, there’s a noticeable delay before the new page appears — something that doesn’t happen in desktop browsers. Many people seem to have made peace with this slowness, accepting that Steam’s built-in browser is just bad. However, there’s a trick that will eliminate this delay on many systems and make the Steam web browser fast. This problem seems to arise from an incompatibility with the Automatically Detect Proxy Settings option, which is enabled by default on Windows. This is a compatibility option that very few people should actually need, so it’s safe to disable it. To disable this option, open the Internet Options dialog — press the Windows key to access the Start menu or Start screen, type Internet Options, and click the Internet Options shortcut. Select the Connections tab in the Internet Options window and click the LAN settings button. Uncheck the Automatically detect settings option here, then click OK to save your settings. If you experienced a significant delay every time a web page loaded in Steam’s web browser, it should now be gone. In the unlikely event that you encounter some sort of problem with your network connection, you could always re-enable this option. Increase Steam’s Game Download Speed Steam attempts to automatically select the nearest download server to your location. However, it may not always select the ideal download server. Or, in the case of high-traffic events like big seasonal sales and huge game launches, you may benefit from selecting a less-congested server. To do this, open Steam’s settings by clicking the Steam menu in Steam and selecting Settings. Click over to the Downloads tab and select the closest download server from the Download Region box. You should also ensure that Steam’s download bandwidth isn’t limited from here. You may want to restart Steam and see if your download speeds improve after changing this setting. In some cases, the closest server might not be the fastest. One a bit farther away could be faster if your local server is more congested, for example. Steam once provided information about content server load, which allowed you to select a regional server that wasn’t under high-load, but this information no longer seems to be available. Steam still provides a page that shows you the amount of download activity happening in different regions, including statistics about the difference in download speeds in different US states, but this information isn’t as useful. Accelerate Steam and Your Games One way to speed up all your games — and Steam itself —  is by getting a solid-state drive and installing Steam to it. Steam allows you to easily move your Steam folder — at C:\Program Files (x86)\Steam by default — to another hard drive. Just move it like you would any other folder. You can then launch the Steam.exe program as if you had never moved Steam’s files. Steam also allows you to configure multiple game library folders. This means that you can set up a Steam library folder on a solid-state drive and one on your larger magnetic hard drive. Install your most frequently played games to the solid-state drive for maximum speed and your less frequently played ones to the slower magnetic hard drive to save SSD space. To set up additional library folders, open Steam’s Settings window and click the Downloads tab. You’ll find the Steam Library Folders option here. Click the Add Library Folder button and create a new game library on another hard drive. When you install a game in Steam, you’ll be asked which library folder you want to install it to. With the proxy compatibility option disabled, the correct download server chosen, and Steam installed to a fast SSD, it should be a speed demon. There’s not much more you can do to speed up Steam, short of upgrading other hardware like your computer’s CPU. Image Credit: Andrew Nash on Flickr     

  Read the article

• OS Analytics with Oracle Enterprise Manager (by Eran Steiner)

  - by Zeynep Koch

  Oracle Enterprise Manager Ops Center provides a feature called "OS Analytics". This feature allows you to get a better understanding of how the Operating System is being utilized. You can research the historical usage as well as real time data. This post will show how you can benefit from OS Analytics and how it works behind the scenes. The recording of our call to discuss this blog is available here: https://oracleconferencing.webex.com/oracleconferencing/ldr.php?AT=pb&SP=MC&rID=71517797&rKey=4ec9d4a3508564b3Download the presentation here See also: Blog about Alert Monitoring and Problem Notification Blog about Using Operational Profiles to Install Packages and other content Here is quick summary of what you can do with OS Analytics in Ops Center: View historical charts and real time value of CPU, memory, network and disk utilization Find the top CPU and Memory processes in real time or at a certain historical day Determine proper monitoring thresholds based on historical data Drill down into a process details Where to start To start with OS Analytics, choose the OS asset in the tree and click the Analytics tab. You can see the CPU utilization, Memory utilization and Network utilization, along with the current real time top 5 processes in each category (click the image to see a larger version):  In the above screen, you can click each of the top 5 processes to see a more detailed view of that process. Here is an example of one of the processes: One of the cool things is that you can see the process tree for this process along with some port binding and open file descriptors. Next, click the "Processes" tab to see real time information of all the processes on the machine: An interesting column is the "Target" column. If you configured Ops Center to work with Enterprise Manager Cloud Control, then the two products will talk to each other and Ops Center will display the correlated target from Cloud Control in this table. If you are only using Ops Center - this column will remain empty. The "Threshold" tab is particularly helpful - you can view historical trends of different monitored values and based on the graph - determine what the monitoring values should be: You can ask Ops Center to suggest monitoring levels based on the historical values or you can set your own. The different colors in the graph represent the current set levels: Red for critical, Yellow for warning and Blue for Information, allowing you to quickly see how they're positioned against real data. It's important to note that when looking at longer periods, Ops Center smooths out the data and uses averages. So when looking at values such as CPU Usage, try shorter time frames which are more detailed, such as one hour or one day. Applying new monitoring values When first applying new values to monitored attributes - a popup will come up asking if it's OK to get you out of the current Monitoring Policy. This is OK if you want to either have custom monitoring for a specific machine, or if you want to use this current machine as a "Gold image" and extract a Monitoring Policy from it. You can later apply the new Monitoring Policy to other machines and also set it as a default Monitoring Profile. Once you're done with applying the different monitoring values, you can review and change them in the "Monitoring" tab. You can also click the "Extract a Monitoring Policy" in the actions pane on the right to save all the new values to a new Monitoring Policy, which can then be found under "Plan Management" -> "Monitoring Policies". Visiting the past Under the "History" tab you can "go back in time". This is very helpful when you know that a machine was busy a few hours ago (perhaps in the middle of the night?), but you were not around to take a look at it in real time. Here's a view into yesterday's data on one of the machines: You can see an interesting CPU spike happening at around 3:30 am along with some memory use. In the bottom table you can see the top 5 CPU and Memory consumers at the requested time. Very quickly you can see that this spike is related to the Solaris 11 IPS repository synchronization process using the "pkgrecv" command. The "time machine" doesn't stop here - you can also view historical data to determine which of the zones was the busiest at a given time: Under the hood The data collected is stored on each of the agents under /var/opt/sun/xvm/analytics/historical/ An "os.zip" file exists for the main OS. Inside you will find many small text files, named after the Epoch time stamp in which they were taken If you have any zones, there will be a file called "guests.zip" containing the same small files for all the zones, as well as a folder with the name of the zone along with "os.zip" in it If this is the Enterprise Controller or the Proxy Controller, you will have folders called "proxy" and "sat" in which you will find the "os.zip" for that controller The actual script collecting the data can be viewed for debugging purposes as well: On Linux, the location is: /opt/sun/xvmoc/private/os_analytics/collect If you would like to redirect all the standard error into a file for debugging, touch the following file and the output will go into it: # touch /tmp/.collect.stderr   The temporary data is collected under /var/opt/sun/xvm/analytics/.collectdb until it is zipped. If you would like to review the properties for the Analytics, you can view those per each agent in /opt/sun/n1gc/lib/XVM.properties. Find the section "Analytics configurable properties for OS and VSC" to view the Analytics specific values. I hope you find this helpful! Please post questions in the comments below. Eran Steiner

  Read the article

• Scripting out Contained Database Users

  - by Argenis

    Today’s blog post comes from a Twitter thread on which @SQLSoldier, @sqlstudent144 and @SQLTaiob were discussing the internals of contained database users. Unless you have been living under a rock, you’ve heard about the concept of contained users within a SQL Server database (hit the link if you have not). In this article I’d like to show you that you can, indeed, script out contained database users and recreate them on another database, as either contained users or as good old fashioned logins/server principals as well. Why would this be useful? Well, because you would not need to know the password for the user in order to recreate it on another instance. I know there is a limited number of scenarios where this would be necessary, but nonetheless I figured I’d throw this blog post to show how it can be done. A more obscure use case: with the password hash (which I’m about to show you how to obtain) you could also crack the password using a utility like hashcat, as highlighted on this SQLServerCentral article. The Investigation SQL Server uses System Base Tables to save the password hashes of logins and contained database users. For logins it uses sys.sysxlgns, whereas for contained database users it leverages sys.sysowners. I’ll show you what I do to figure this stuff out: I create a login/contained user, and then I immediately browse the transaction log with, for example, fn_dblog. It’s pretty obvious that only two base tables touched by the operation are sys.sysxlgns, and also sys.sysprivs – the latter is used to track permissions. If I connect to the DAC on my instance, I can query for the password hash of this login I’ve just created. A few interesting things about this hash. This was taken on my laptop, and I happen to be running SQL Server 2014 RTM CU2, which is the latest public build of SQL Server 2014 as of time of writing. In 2008 R2 and prior versions (back to 2000), the password hashes would start with 0x0100. The reason why this changed is because starting with SQL Server 2012 password hashes are kept using a SHA512 algorithm, as opposed to SHA-1 (used since 2000) or Snefru (used in 6.5 and 7.0). SHA-1 is nowadays deemed unsafe and is very easy to crack. For regular SQL logins, this information is exposed through the sys.sql_logins catalog view, so there is really no need to connect to the DAC to grab an SID/password hash pair. For contained database users, there is (currently) no method of obtaining SID or password hashes without connecting to the DAC. If we create a contained database user, this is what we get from the transaction log: Note that the System Base Table used in this case is sys.sysowners. sys.sysprivs is used as well, and again this is to track permissions. To query sys.sysowners, you would have to connect to the DAC, as I mentioned previously. And this is what you would get: There are other ways to figure out what SQL Server uses under the hood to store contained database user password hashes, like looking at the execution plan for a query to sys.dm_db_uncontained_entities (Thanks, Robert Davis!) SIDs, Logins, Contained Users, and Why You Care…Or Not. One of the reasons behind the existence of Contained Users was the concept of portability of databases: it is really painful to maintain Server Principals (Logins) synced across most shared-nothing SQL Server HA/DR technologies (Mirroring, Availability Groups, and Log Shipping). Often times you would need the Security Identifier (SID) of these logins to match across instances, and that meant that you had to fetch whatever SID was assigned to the login on the principal instance so you could recreate it on a secondary. With contained users you normally wouldn’t care about SIDs, as the users are always available (and synced, as long as synchronization takes place) across instances. Now you might be presented some particular requirement that might specify that SIDs synced between logins on certain instances and contained database users on other databases. How would you go about creating a contained database user with a specific SID? The answer is that you can’t do it directly, but there’s a little trick that would allow you to do it. Create a login with a specified SID and password hash, create a user for that server principal on a partially contained database, then migrate that user to contained using the system stored procedure sp_user_migrate_to_contained, then drop the login. CREATE LOGIN <login_name> WITH PASSWORD = <password_hash> HASHED, SID = <sid> ; GO USE <partially_contained_db>; GO CREATE USER <user_name> FROM LOGIN <login_name>; GO EXEC sp_migrate_user_to_contained @username = <user_name>, @rename = N’keep_name’, @disablelogin = N‘disable_login’; GO DROP LOGIN <login_name>; GO Here’s how this skeleton would look like in action: And now I have a contained user with a specified SID and password hash. In my example above, I renamed the user after migrated it to contained so that it is, hopefully, easier to understand. Enjoy!

  Read the article

• Remote Debug Windows Azure Cloud Service

  - by Shaun

  Originally posted on: http://geekswithblogs.net/shaunxu/archive/2013/11/02/remote-debug-windows-azure-cloud-service.aspxOn the 22nd of October Microsoft Announced the new Windows Azure SDK 2.2. It introduced a lot of cool features but one of it shocked most, which is the remote debug support for Windows Azure Cloud Service (a.k.a. WACS).   Live Debug is Nightmare for Cloud Application When we are developing against public cloud, debug might be the most difficult task, especially after the application had been deployed. In order to minimize the debug effort, Microsoft provided local emulator for cloud service and storage once the Windows Azure platform was announced. By using local emulator developers could be able run their application on local machine with almost the same behavior as running on Windows Azure, and that could be debug easily and quickly. But when we deployed our application to Azure, we have to use log, diagnostic monitor to debug, which is very low efficient. Visual Studio 2012 introduced a new feature named "anonymous remote debug" which allows any workstation under any user could be able to attach the remote process. This is less secure comparing the authenticated remote debug but much easier and simpler to use. Now in Windows Azure SDK 2.2, we could be able to attach our application from our local machine to Windows Azure, and it's very easy.   How to Use Remote Debugger First, let's create a new Windows Azure Cloud Project in Visual Studio and selected ASP.NET Web Role. Then create an ASP.NET WebForm application. Then right click on the cloud project and select "publish". In the publish dialog we need to make sure the application will be built in debug mode, since .NET assembly cannot be debugged in release mode. I enabled Remote Desktop as I will log into the virtual machine later in this post. It's NOT necessary for remote debug. And selected "advanced settings" tab, make sure we checked "Enable Remote Debugger for all roles". In WACS, a cloud service could be able to have one or more roles and each role could be able to have one or more instances. The remote debugger will be enabled for all roles and all instances if we checked. Currently there's no way for us to specify which role(s) and which instance(s) to enable. Finally click "publish" button. In the windows azure activity window in Visual Studio we can find some information about remote debugger. To attache remote process would be easy. Open the "server explorer" window in Visual Studio and expand "cloud services" node, find the cloud service, role and instance we had just published and wanted to debug, right click on the instance and select "attach debugger". Then after a while (it's based on how fast our Internet connect to Windows Azure Data Center) the Visual Studio will be switched to debug mode. Let's add a breakpoint in the default web page's form load function and refresh the page in browser to see what's happen. We can see that the our application was stopped at the breakpoint. The call stack, watch features are all available to use. Now let's hit F5 to continue the step, then back to the browser we will find the page was rendered successfully.   What Under the Hood Remote debugger is a WACS plugin. When we checked the "enable remote debugger" in the publish dialog, Visual Studio will add two cloud configuration settings in the CSCFG file. Since they were appended when deployment, we cannot find in our project's CSCFG file. But if we opened the publish package we could find as below. At the same time, Visual Studio will generate a certificate and included into the package for remote debugger. If we went to the azure management portal we will find there will a certificate under our application which was created, uploaded by remote debugger plugin. Since I enabled Remote Desktop there will be two certificates in the screenshot below. The other one is for remote debugger. When our application was deployed, windows azure system will open related ports for remote debugger. As below you can see there are two new ports opened on my application. Finally, in our WACS virtual machine, windows azure system will copy the remote debug component based on which version of Visual Studio we are using and start. Our application then can be debugged remotely through the visual studio remote debugger. Below is the task manager on the virtual machine of my WACS application.   Summary In this post I demonstrated one of the feature introduced in Windows Azure SDK 2.2, which is Remote Debugger. It allows us to attach our application from local machine to windows azure virtual machine once it had been deployed. Remote debugger is powerful and easy to use, but it brings more security risk. And since it's only available for debug build this means the performance will be worse than release build. Hence we should only use this feature for staging test and bug fix (publish our beta version to azure staging slot), rather than for production.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• Windows 8 Live Accounts and the actual Windows Account

  - by Rick Strahl

  As if Windows Security wasn't confusing enough, in Windows 8 we get thrown yet another curve ball with Windows Live accounts to logon. When I set up my Windows 8 machine I originally set it up with a 'real', non-live account that I always use on my Windows machines. I did this mainly so I have a matching account for resources around my home and intranet network so I could log on to network resources properly. At some point later I decided to set up Windows Live security just to see how changes things. Windows wants you to use Windows Live Windows 8 logins are required in order for the Windows RT account info to work. Not that I care - since installing Windows 8 I've maybe spent 10 minutes with Windows RT because - well it's pretty freaking sucky on the desktop. From shitty apps to mis-managed screen real estate I can't say that there's anything compelling there to date, but then I haven't looked that hard either. Anyway… I set up the Windows Live account to see if that changes things. It does - I do get all my live logins to work from Live Account so that Twitter and Facebook posts and pictures and calendars all show up on live tiles on the start screen and in the actual apps. That's nice-ish, but hardly that exciting given that all of the apps tied to those live tiles are average at best. And it would have been nice if all of this could be done without being forced into running with a Windows Live User Account - this all feels like strong-arming you into moving into Microsofts walled garden… and that's probably what it's meant to do. Who am I? The real problem to me though is that these Windows Live and raw Windows User accounts are a bit unpredictable especially when it comes to developer information about the account and which credentials to use. So for example Windows reports folder security like this: Notice it's showing my Windows Live account. Now if I go to Edit and try to add my Windows user account (rstrahl) it'll just automatically show up as the live account. On the other hand though the underlying system sees everything as my real Windows account. After I switched to a Windows Live login account and I have to login to Windows with my Live account, what do you suppose this returns?Console.WriteLine(Environment.UserName); It returns my raw Windows user account (rstrahl). All my permissions, all my actual settings and the desktop console altogether run under that account. If I look in TaskManager (or Process Explorer for me) I see: Everything running on the desktop shell with my login running under my Windows user account. I suppose it makes sense, but where is that association happening? When I switched to a Windows Live account, nowhere did I associate my real account with the Live account - it just happened. And looking through the account configuration dialogs I can't find any reference to the raw Windows account. Other than switching back I see no mention anywhere of the raw Windows account - everything refers to the Live account. Right then, clear as potato soup! So this is who you really are! The problem is that in some situations this schizophrenic account behavior gets a bit weird. Today I was running a local Web application in IIS that uses Windows Authentication - I tried to log-in with my real Windows account login because that's what I'm used to using with WINDOWS freaking Authentication through IIS. But… it failed. I checked my IIS settings, my apps login settings and I just could not for the life of me get into the site with my Windows username. That is until I finally realized that I should try using my Windows Live credentials instead. And that worked. So now in this Windows Authentication dialog I had to type in my Live ID and password, which is - just weird. Then in IIS if I look at a Trace page (or in my case my app's Status page) I see that the logged on account is - my Windows user account. What's really annoying about this is that in some places it uses the live account in other places it uses my Windows account. If I remote desktop into my Web server online - I have to use the local authentication dialog but I have to put in my real Windows credentials not the Live account. Oh yes, it's all so terribly intuitive and logical… So in summary, when you log on with a Live account you are actually mapped to an underlying Windows user. In any application if you check the user name it'll be the underlying user account (not sure what happens in a Windows RT app or even what mechanism is used there to get the user name info).  When logging on to local machine resource with user name and password you have to use your Live IDs even if the permissions on the resources are mapped to your underlying Windows account. Easy enough I suppose, but still not exactly intuitive behavior…© Rick Strahl, West Wind Technologies, 2005-2012Posted in Windows   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Answers to “What source control system do you use?” (and some winners)

  - by jamiet

  About a month ago I posed a question here on my blog SQL Server devs–what source control system do you use, if any? (answer and maybe win free stuff) in which I asked SQL Server developers to answer the following questions: Are you putting your SQL Server code into a source control system? If so, what source control server software (e.g. TFS, Git, SVN, Mercurial, SourceSafe, Perforce) are you using? What source control client software are you using (e.g. TFS Team Explorer, Tortoise, Red Gate SQL Source Control, Red Gate SQL Connect, Git Bash, etc…)? Why did you make those particular software choices? Any interesting anecdotes to share in regard to your use of source control and SQL Server? I had some really great responses (I highly recommend going and reading them). I promised that the five best, most thought-provoking, responses (as determined by me) would win one of five pairs of licenses for Red Gate SQL Source Control and Red Gate SQL Connect; here are the five that I chose (note that if you responded but did not leave a means of getting in touch then you weren’t considered for one of the prizes – sorry): In general, I don't think the management overhead and licensing cost associated with TFS is worthwhile if all you're doing is using source control. To get value from TFS, at a minimum you need to be using team build, and possibly other stuff as well, such as the sharepoint integration. If that's all you need, then svn with Tortoise would be my first choice. If you want to add build automation later, you can do this with cruisecontrol (is it still called that?), JetBrains, etc. For a long time I thought that Redgate's claims about "bridging the SSMS-VS divide" were a load of hot air, since in my experience anyone who knew what they were doing was using Visual Studio, in particular SSDT and its predecessors. However, on a recent client I was putting in source control for the first time, and I discovered that the "divide" really does exist. That client has ended up using svn with Redgate SQL Source Control, with no build automation, but with scope to add it in the future. Gavin Campbell I think putting the DB under source control is a great idea.  I have issues with the earlier versions of SQL Source Control in that it provides little help in versioning the DB. I think the latest version merges SQL Compare and SQL Source Control together.  Which is how it should have been all along. Sure I have the DB scripts in SVN, but I can't automate DB builds and changes without more tools.  Frankly I'm surprised databases don't have some sort of versioning built into them. Nick Portelli Source control has been immensely useful and saved me from a lot of rework on more than one occasion.  I have learned that you have to be extremely careful checking in data.  Our system is internal only so during the system production run once a week, if there is a problem that I can fix easily(for example, a control table points to a file in the wrong environment), I'll do it directly in production so the run can continue as soon as possible since we have a specified time window.  We do full test runs to minimize this but it has come up once or twice.  We use Red-Gate source control to "push" from the test environment to the production environment.  There have been a couple of occasions where the test environment with the wrong setting was pushed back over the production environment because the change was made only in production.  Gotta keep an eye on that. Alan Dykes Goodness is it manual.  And can be extremely painful at times.  Not only are we running thin, we are constrained on the tools we can get ($$ must mean free).  Certainly no excuse, and a great opportunity to improve my skills by learning new things.  But...  Getting buy in a on a proven process or methodology is hard, takes time, and diverts us from development.  If SQL Source Control is easy to use and proven oh boy could you get some serious fans around here!  Seriously though, as the "accidental dba" of this shop any new ideas / easy to implement tools can make a world of difference in productivity and most importantly accuracy.  Manual = bad. :) John Hennesey (who left his email address) The one thing I would love to know more about is the unique challenges of working with databases as source code - you can store scripts, but are they written as deployment scripts with all the logic about how to apply them to an existing DB? Where is that baseline DB? Where's the data? How does a team share the data and the code? It's a real challenge. Merrill Aldrich Congratulations to the five of you. Red Gate will be in touch with you soon about your free licenses. Thank you to all those that responded. And again, go and check out all the responses – those above are only small proportion from what is a very interesting comment thread. @Jamiet

  Read the article

• Oracle Social Network Developer Challenge Winners

  - by kellsey.ruppel

  Originally posted by Jake Kuramoto on The Apps Lab blog. Now that OpenWorld 2012 has wrapped, I have time to tell you all about what happened. Maybe you recall that Noel (@noelportugal) and I were running a modified hackathon during the show, the Oracle Social Network Developer Challenge. Without further ado, congratulations to Dimitri Gielis (@dgielis) and Martin Giffy D’Souza (@martindsouza) on their winning entry, an integration between Oracle APEX and Oracle Social Network that integrates feedback and bug submission with Oracle Social Network Conversations, allowing developers, end-users and project leaders to view and discuss the feedback on their APEX applications from within Oracle Social Network. Update: Bob Rhubart of OTN (@brhubart) interviewed Dimitri and Martin right after their big win. Money quote from Dimitri when asked what he’d buy with the $500 in Amazon gift cards, “Oracle Social Network.” Nice one. In their own words: In the developers perspective it’s important to get feedback soon, so after a first iteration and end-users start to test, they can give feedback of the application. Previously it stopped there, and it was up to the developer to communicate further with email, phone etc. With OSN every feedback and communication gets logged and other people can see the discussion immediately as well. For the end users perspective he can now communicate in a more efficient way to not only the developers, but also between themselves. Maybe many end-users (in different locations) would like to change some behaviour, by using OSN they can see the entry somebody put in with a screenshot and they can just start to chat about it. Some key technical end users can have lighten the tasks of the development team by looking at the feedback first and start to communicate with their peers. For the project manager he has now the ability to really see what communication has taken place in certain areas and can make decisions on that. Later, if things come up again, he can always go back in OSN and see what was said at that moment in time. Integrating OSN in the APEX applications enhances the user experience, makes the lives of the developers easier and gives a better overview to project managers. Incidentally, you may already know Dimitri and Martin, since both are Oracle Ace Directors. I ran into Martin at the Ace Director briefings Friday before the conference started, and at that point, he wasn’t sure he’d have time to enter the Challenge. After some coaxing, he and Dimitri agreed to give it a go and banged out their entry on Tuesday night, or more accurately, very early Wednesday morning, the day of the Challenge judging. I think they said it took them about four hours of hardcore coding to get it done, very much like a traditional hackathon, which is essentially a code sprint from idea to finished product. Here are some screenshots of the workflow they built. #gallery-1 { margin: auto; } #gallery-1 .gallery-item { float: left; margin-top: 10px; text-align: center; width: 33%; } #gallery-1 img { border: 2px solid #cfcfcf; } #gallery-1 .gallery-caption { margin-left: 0; } I love this idea, i.e. closing the loop between web developers and users, a very common pain point, and so did our judges. Speaking of, special thanks to our panel of three judges: Reggie Bradford (@reggiebradford), serial entrepreneur, founder of Vitrue and SVP of Cloud Product Development at Oracle Robert Hipps (@roberthipps), VP of Development for Oracle Social Network and my former boss Roland Smart (@rsmartx), VP of Social Marketing and the brains behind the Oracle Social Developer Community Finally, thanks to everyone who made this possible, including: The three other teams from HarQen (@harqen), TEAM Informatics (@teaminformatics) and Fishbowl Solutions (@fishbowle20) featuring Friend of the ‘Lab John Sim (@jrsim_uix), who finished and presented entries. I’ll be posting the details of their work this week. The one guy who finished an entry, but couldn’t make the judging, Bex Huff (@bex). Bex rallied from a hospitalization due to an allergic reaction during the show; he’s fine, don’t worry. I’ll post details of his work next week, too. The 40-plus people who registered to compete in the Challenge. Noel for all his hard work, sample code, and flying monkey target, more on that to come. The Oracle Social Network development team for supporting this event. Everyone in legal and the beta program office for their help. And finally, the Oracle Technology Network (@oracletechnet) for hosting the event and providing countless hours of operational and moral support. Sorry if I’ve missed some people, since this was a huge team effort. This event was a big success, and we plan to do similar events in the future. Stay tuned to this channel for more. 

  Read the article

• Sea Monkey Sales & Marketing, and what does that have to do with ERP?

  - by user709270

  Tier One Defined By Lyle Ekdahl, Oracle JD Edwards Group Vice President and General Manager  I recently became aware of the latest Sea Monkey Sales & Marketing tactic. Wait now, what is Sea Monkey Sales & Marketing and what does that have to do with ERP? Well if you grew up in USA during the 50’s, 60’s and maybe a bit in the early 70’s there was a unifying media of culture known as the comic book. I was a big Iron Man fan. I always liked the troubled hero aspect of Tony Start and hey he was a technologist. This is going somewhere, just hold on. Of course comic books like most media contained advertisements. Ninety pound weakling transformed by Charles Atlas in just 15 minutes per day. Baby Ruth, Juicy Fruit Gum and all assortments of Hostess goodies were on display. The best ad was for the “Amazing Live Sea-Monkeys – The real live fun-pets you grow yourself!” These ads set the standard for exaggeration and half-truth; “…they love attention…so eager to please, they can even be trained…” The cartoon picture on the ad is of a family of royal looking sea creatures – daddy, mommy, son and little sis – sea monkey? There was a disclaimer at the bottom in fine print, “Caricatures shown not intended to depict Artemia.” Ok what ten years old knows what the heck artemia is? Well you grow up fast once you’ve been separated from your buck twenty five plus postage just to discover that it is brine shrimp. Really dumb brine shrimp that don’t take commands or do tricks. Unfortunately the technology industry is full of sea monkey sales and marketing. Yes believe it or not in some cases there is subterfuge and obfuscation used to secure contracts. Hey I get it; the picture on the box might not be the actual size. Make up what you want about your product, but here is what I don’t like, could you leave out the obvious falsity when it comes to my product, especially the negative stuff. So here is the latest one – “Oracle’s JD Edwards is NOT tier one”. Really? Definition please! Well a whole host of googleable and reputable sources confirm that a tier one vendor is large, well known, and enjoys national and international recognition. Let me see large, so thousands of customers? Oh and part of the world’s largest business software and hardware corporation? Check and check JD Edwards has that and that. Well known, enjoying national and international recognition? Oracle’s JD Edwards EnterpriseOne is available in 21 languages and is directly localized in 33 countries that support some of the world’s largest multinationals and many midsized domestic market companies. Something on the order of half the JD Edwards customer base is outside North America. My passport is on its third insert after 2 years and not from vacations. So if you don’t mind I am going to mark national and international recognition in the got it column. So what else is there? Well let me offer a few criteria. Longevity – The JD Edwards products benefit from 35+ years of intellectual property development; through booms, busts, mergers and acquisitions, we are still here Vision & innovation – JD Edwards is the first full suite ERP to run on the iPad as just one example Proven track record of execution – Since becoming part of Oracle, JD Edwards has released to the market over 20 deliverables including major release, point releases, new apps modules, tool releases, integrations…. Solid, focused functionality with a flexible, interoperable, extensible underlying architecture – JD Edwards offers solid core ERP with specialty modules for verticals all delivered on a well defined independent tools layer that helps enable you to scale your business without an ERP reimplementation A continuation plan – Oracle’s JD Edwards offers our customers a 6 year roadmap as well as interoperability with Oracle’s next generation of applications Oh I almost forgot that the expert sources agree on one additional thing, tier one may be a preferred vendor that offers product and services to you with appealing value. You should check out the TCO studies of JD Edwards. I think you will see what the thousands of customers that rely on these products to run their businesses enjoy – that is the tier one solution with the lowest TCO. Oh and if you get an offer to buy an ERP for no license charge, remember the picture on the box might not be the actual size. 

  Read the article

• MySQL Connect Only 10 Days Away - Focus on InnoDB Sessions

  - by Bertrand Matthelié

  Time flies and MySQL Connect is only 10 days away! You can check out the full program here as well as in the September edition of the MySQL newsletter. Mat recently blogged about the MySQL Cluster sessions you’ll have the opportunity to attend, and below are those focused on InnoDB. Remember you can plan your schedule with Schedule Builder. Saturday, 1.00 pm, Room Golden Gate 3: 10 Things You Should Know About InnoDB—Calvin Sun, Oracle InnoDB is the default storage engine for Oracle’s MySQL as of MySQL Release 5.5. It provides the standard ACID-compliant transactions, row-level locking, multiversion concurrency control, and referential integrity. InnoDB also implements several innovative technologies to improve its performance and reliability. This presentation gives a brief history of InnoDB; its main features; and some recent enhancements for better performance, scalability, and availability. Saturday, 5.30 pm, Room Golden Gate 4: Demystified MySQL/InnoDB Performance Tuning—Dimitri Kravtchuk, Oracle This session covers performance tuning with MySQL and the InnoDB storage engine for MySQL and explains the main improvements made in MySQL Release 5.5 and Release 5.6. Which setting for which workload? Which value will be better for my system? How can I avoid potential bottlenecks from the beginning? Do I need a purge thread? Is it true that InnoDB doesn't need thread concurrency anymore? These and many other questions are asked by DBAs and developers. Things are changing quickly and constantly, and there is no “silver bullet.” But understanding the configuration setting’s impact is already a huge step in performance improvement. Bring your ideas and problems to share them with others—the discussion is open, just moderated by a speaker. Sunday, 10.15 am, Room Golden Gate 4: Better Availability with InnoDB Online Operations—Calvin Sun, Oracle Many top Web properties rely on Oracle’s MySQL as a critical piece of infrastructure for serving millions of users. Database availability has become increasingly important. One way to enhance availability is to give users full access to the database during data definition language (DDL) operations. The online DDL operations in recent MySQL releases offer users the flexibility to perform schema changes while having full access to the database—that is, with minimal delay of operations on a table and without rebuilding the entire table. These enhancements provide better responsiveness and availability in busy production environments. This session covers these improvements in the InnoDB storage engine for MySQL for online DDL operations such as add index, drop foreign key, and rename column. Sunday, 11.45 am, Room Golden Gate 7: Developing High-Throughput Services with NoSQL APIs to InnoDB and MySQL Cluster—Andrew Morgan and John Duncan, Oracle Ever-increasing performance demands of Web-based services have generated significant interest in providing NoSQL access methods to MySQL (MySQL Cluster and the InnoDB storage engine of MySQL), enabling users to maintain all the advantages of their existing relational databases while providing blazing-fast performance for simple queries. Get the best of both worlds: persistence; consistency; rich SQL queries; high availability; scalability; and simple, flexible APIs and schemas for agile development. This session describes the memcached connectors and examines some use cases for how MySQL and memcached fit together in application architectures. It does the same for the newest MySQL Cluster native connector, an easy-to-use, fully asynchronous connector for Node.js. Sunday, 1.15 pm, Room Golden Gate 4: InnoDB Performance Tuning—Inaam Rana, Oracle The InnoDB storage engine has always been highly efficient and includes many unique architectural elements to ensure high performance and scalability. In MySQL 5.5 and MySQL 5.6, InnoDB includes many new features that take better advantage of recent advances in operating systems and hardware platforms than previous releases did. This session describes unique InnoDB architectural elements for performance, new features, and how to tune InnoDB to achieve better performance. Sunday, 4.15 pm, Room Golden Gate 3: InnoDB Compression for OLTP—Nizameddin Ordulu, Facebook and Inaam Rana, Oracle Data compression is an important capability of the InnoDB storage engine for Oracle’s MySQL. Compressed tables reduce the size of the database on disk, resulting in fewer reads and writes and better throughput by reducing the I/O workload. Facebook pushes the limit of InnoDB compression and has made several enhancements to InnoDB, making this technology ready for online transaction processing (OLTP). In this session, you will learn the fundamentals of InnoDB compression. You will also learn the enhancements the Facebook team has made to improve InnoDB compression, such as reducing compression failures, not logging compressed page images, and allowing changes of compression level. Not registered yet? You can still save US$ 300 over the on-site fee – Register Now!

  Read the article

• SQL SERVER – Number-Crunching with SQL Server – Exceed the Functionality of Excel

  - by Pinal Dave

  Imagine this. Your users have developed an Excel spreadsheet that extracts data from your SQL Server database, manipulates that data through the use of Excel formulas and, possibly, some VBA code which is then used to calculate P&L, hedging requirements or even risk numbers. Management comes to you and tells you that they need to get rid of the spreadsheet and that the results of the spreadsheet calculations need to be persisted on the database. SQL Server has a very small set of functions for analyzing data. Excel has hundreds of functions for analyzing data, with many of them focused on specific financial and statistical calculations. Is it even remotely possible that you can use SQL Server to replace the complex calculations being done in a spreadsheet? Westclintech has developed a library of functions that match or exceed the functionality of Excel’s functions and contains many functions that are not available in EXCEL. Their XLeratorDB library of functions contains over 700 functions that can be incorporated into T-SQL statements. XLeratorDB takes advantage of the SQL CLR architecture introduced in SQL Server 2005. SQL CLR permits managed code to be compiled into the database and run alongside built-in SQL Server functions like COUNT or SUM. The Westclintech developers have taken advantage of this architecture to bring robust analytical functions to the database. In our hypothetical spreadsheet, let’s assume that our users are using the YIELD function and that the data are extracted from a table in our database called BONDS. Here’s what the spreadsheet might look like. We go to column G and see that it contains the following formula. Obviously, SQL Server does not offer a native YIELD function. However, with XLeratorDB we can replicate this calculation in SQL Server with the following statement: SELECT *, wct.YIELD(CAST(GETDATE() AS date),Maturity,Rate,Price,100,Frequency,Basis) AS YIELD FROM BONDS This produces the following result. This illustrates one of the best features about XLeratorDB; it is so easy to use. Since I knew that the spreadsheet was using the YIELD function I could use the same function with the same calling structure to do the calculation in SQL Server. I didn’t need to know anything at all about the mechanics of calculating the yield on a bond. It was pretty close to cut and paste. In fact, that’s one way to construct the SQL. Just copy the function call from the cell in the spreadsheet and paste it into SMS and change the cell references to column names. I built the SQL for this query by starting with this. SELECT * ,YIELD(TODAY(),B2,C2,D2,100,E2,F2) FROM BONDS I then changed the cell references to column names. SELECT * --,YIELD(TODAY(),B2,C2,D2,100,E2,F2) ,YIELD(TODAY(),Maturity,Rate,Price,100,Frequency,Basis) FROM BONDS Finally, I replicated the TODAY() function using GETDATE() and added the schema name to the function name. SELECT * --,YIELD(TODAY(),B2,C2,D2,100,E2,F2) --,YIELD(TODAY(),Maturity,Rate,Price,100,Frequency,Basis) ,wct.YIELD(GETDATE(),Maturity,Rate,Price,100,Frequency,Basis) FROM BONDS Then I am able to execute the statement returning the results seen above. The XLeratorDB libraries are heavy on financial, statistical, and mathematical functions. Where there is an analog to an Excel function, the XLeratorDB function uses the same naming conventions and calling structure as the Excel function, but there are also hundreds of additional functions for SQL Server that are not found in Excel. You can find the functions by opening Object Explorer in SQL Server Management Studio (SSMS) and expanding the Programmability folder under the database where the functions have been installed. The  Functions folder expands to show 3 sub-folders: Table-valued Functions; Scalar-valued functions, Aggregate Functions, and System Functions. You can expand any of the first three folders to see the XLeratorDB functions. Since the wct.YIELD function is a scalar function, we will open the Scalar-valued Functions folder, scroll down to the wct.YIELD function and and click the plus sign (+) to display the input parameters. The functions are also Intellisense-enabled, with the input parameters displayed directly in the query tab. The Westclintech website contains documentation for all the functions including examples that can be copied directly into a query window and executed. There are also more one hundred articles on the site which go into more detail about how some of the functions work and demonstrate some of the extensive business processes that can be done in SQL Server using XLeratorDB functions and some T-SQL. XLeratorDB is organized into libraries: finance, statistics; math; strings; engineering; and financial options. There is also a windowing library for SQL Server 2005, 2008, and 2012 which provides functions for calculating things like running and moving averages (which were introduced in SQL Server 2012), FIFO inventory calculations, financial ratios and more, without having to use triangular joins. To get started you can download the XLeratorDB 15-day free trial from the Westclintech web site. It is a fully-functioning, unrestricted version of the software. If you need more than 15 days to evaluate the software, you can simply download another 15-day free trial. XLeratorDB is an easy and cost-effective way to start adding sophisticated data analysis to your SQL Server database without having to know anything more than T-SQL. Get XLeratorDB Today and Now! Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: Excel

  Read the article

• Dynamically switching the theme in Orchard

  - by Bertrand Le Roy

  It may sound a little puzzling at first, but in Orchard CMS, more than one theme can be active at any given time. The reason for that is that we have an extensibility point that allows a module (or a theme) to participate in the choice of the theme to use, for each request. The motivation for building the theme engine this way was to enable developers to switch themes based on arbitrary criteria, such as user preferences or the user agent (if you want to serve a mobile theme for phones for example). The choice is made between the active themes, which is why there is a difference between the default theme and the active themes. In order to have a say in the choice of the theme, all you have to do is implement IThemeSelector. That interface is quite simple as it only has one method, GetTheme, that takes the current RequestContext and returns a ThemeSelectorResult or null if the implementation of the interface does not want to participate in the current request (we'll see an example in a moment). ThemeSelectorResult itself is just a ThemeName string property and an integer Priority. We're using a priority so that an arbitrary number of implementations of IThemeSelector can contribute to the choice of a theme. If you look for existing implementations of the interface in Orchard, you'll find four: AdminThemeSelector: selects the TheAdmin theme with a very high priority (100) if the current request is for a page that is part of the admin. Otherwise, null is returned, which enables other implementations to choose the theme. PreviewThemeSelector: selects the preview theme if there is one, with a high priority (90), and null otherwise. This enables administrators to view the site under a different theme while everybody else continues to see the current default theme. SiteThemeSelector: this is the implementation that is doing what you expect most of the time, which is to get the current theme from site settings and set it with a priority of –5. SafeModeThemeSelector: this is the fallback implementation, which should almost never win. It sets the theme as the safe mode theme, which has no style and just uses the default templates for everything. The priority is very low (-100). While this extensibility mechanism is great to have, I wanted to bring that level of choice into the hands of the site administrator rather than just developers. In order to achieve that, I built the Vandelay Theme Picker module. The module provides administration UI to create rules for theme selection. It provides its own extensibility point (the IThemeSelectionRule interface) and one implementation of a rule: UserAgentThemeSelectorRule. This rule gets the current user agent from the context and tries to match it with a regular expression that the administrator can configure in the admin UI. You can for example configure a rule with a regular expression that matches IE6 and serve a different subtheme where the stylesheet has been tweaked for such an antique browser. Another possible configuration is to detect mobile devices from their agent string and serve the mobile theme. All those operations can be done with this module entirely from the admin UI, without writing a line of code. The module also offers the administrator the opportunity to inject a link into the front-end in a specific zone and with a specific position that enables the user to switch to the default theme if he wishes to. This is especially useful for sites that use a mobile theme but still want to allow users to use the full desktop site. While the module is nice and flexible, it may be overkill. On my own personal blog, I have only two active themes: the desktop theme and the mobile theme. I'm fine with going into code to change the criteria on which to switch the theme, so I'm not using my own Theme Picker module. Instead, I made the mobile theme a theme with code (in other words there is a csproj file in the theme). The project includes a single C# file, my MobileThemeSelector for which the code is the following: public class MobileThemeSelector : IThemeSelector { private static readonly Regex _Msie678 = new Regex(@"^Mozilla\/4\.0 \(compatible; MSIE [678]" + @"\.0; Windows NT \d\.\d(.*)\)$", RegexOptions.IgnoreCase); private ThemeSelectorResult _requestCache; private bool _requestCached; public ThemeSelectorResult GetTheme(RequestContext context) { if (_requestCached) return _requestCache; _requestCached = true; var userAgent = context.HttpContext.Request.UserAgent; if (userAgent.IndexOf("phone", StringComparison.OrdinalIgnoreCase) != -1 || _Msie678.IsMatch(userAgent) || userAgent.IndexOf("windows live writer", StringComparison.OrdinalIgnoreCase) != -1) { _requestCache = new ThemeSelectorResult { Priority = 10, ThemeName = "VuLuMobile" }; } return _requestCache; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The theme selector selects the current theme for Internet Explorer versions 6 to 8, for phones, and for Windows Live Writer (so that the theme that is used when I write posts is as simple as possible). What's interesting here is that it's the theme that selects itself here, based on its own criteria. This should give you a good panorama of what's possible in terms of dynamic theme selection in Orchard. I hope you find some fun uses for it. As usual, I can't wait to see what you're going to come up with…

  Read the article

• How to Secure a Data Role by Multiple Business Units

  - by Elie Wazen

  In this post we will see how a Role can be data secured by multiple Business Units (BUs).  Separate Data Roles are generally created for each BU if a corresponding data template generates roles on the basis of the BU dimension. The advantage of creating a policy with a rule that includes multiple BUs is that while mapping these roles in HCM Role Provisioning Rules, fewer number of entires need to be made. This could facilitate maintenance for enterprises with a large number of Business Units. Note: The example below applies as well if the securing entity is Inventory Organization. Let us take for example the case of a user provisioned with the "Accounts Payable Manager - Vision Operations" Data Role in Fusion Applications. This user will be able to access Invoices in Vision Operations but will not be able to see Invoices in Vision Germany. Figure 1. A User with a Data Role restricting them to Data from BU: Vision Operations With the role granted above, this is what the user will see when they attempt to select Business Units while searching for AP Invoices. Figure 2.The List Of Values of Business Units is limited to single one. This is the effect of the Data Role granted to that user as can be seen in Figure 1 In order to create a data role that secures by multiple BUs,  we need to start by creating a condition that groups those Business Units we want to include in that data role. This is accomplished by creating a new condition against the BU View .  That Condition will later be used to create a data policy for our newly created Role.  The BU View is a Database resource and  is accessed from APM as seen in the search below Figure 3.Viewing a Database Resource in APM The next step is create a new condition,  in which we define a sql predicate that includes 2 BUs ( The ids below refer to Vision Operations and Vision Germany).  At this point we have simply created a standalone condition.  We have not used this condition yet, and security is therefore not affected. Figure 4. Custom Role that inherits the Purchase Order Overview Duty We are now ready to create our Data Policy.  in APM, we search for our newly Created Role and Navigate to “Find Global Policies”.  we query the Role we want to secure and navigate to view its global policies. Figure 5. The Job Role we plan on securing We can see that the role was not defined with a Data Policy . So will create one that uses the condition we created earlier.   Figure 6. Creating a New Data Policy In the General Information tab, we have to specify the DB Resource that the Security Policy applies to:  In our case this is the BU View Figure 7. Data Policy Definition - Selection of the DB Resource we will secure by In the Rules Tab, we  make the rule applicable to multiple values of the DB Resource we selected in the previous tab.  This is where we associate the condition we created against the BU view to this data policy by entering the Condition name in the Condition field Figure 8. Data Policy Rule The last step of Defining the Data Policy, consists of  explicitly selecting  the Actions that are goverened by this Data Policy.  In this case for example we select the Actions displayed below in the right pane. Once the record is saved , we are ready to use our newly secured Data Role. Figure 9. Data Policy Actions We can now see a new Data Policy associated with our Role.  Figure 10. Role is now secured by a Data Policy We now Assign that new Role to the User.  Of course this does not have to be done in OIM and can be done using a Provisioning Rule in HCM. Figure 11. Role assigned to the User who previously was granted the Vision Ops secured role. Once that user accesses the Invoices Workarea this is what they see: In the image below the LOV of Business Unit returns the two values defined in our data policy namely: Vision Operations and Vision Germany Figure 12. The List Of Values of Business Units now includes the two we included in our data policy. This is the effect of the data role granted to that user as can be seen in Figure 11

  Read the article

• What should you bring to the table as a Software Architect?

  - by Ahmad Mageed

  There have been many questions with good answers about the role of a Software Architect (SA) on StackOverflow and Programmers SE. I am trying to ask a slightly more focused question than those. The very definition of a SA is broad so for the sake of this question let's define a SA as follows: A Software Architect guides the overall design of a project, gets involved with coding efforts, conducts code reviews, and selects the technologies to be used. In other words, I am not talking about managerial rest and vest at the crest (further rhyming words elided) types of SAs. If I were to pursue any type of SA position I don't want to be away from coding. I might sacrifice some time to interface with clients and Business Analysts etc., but I am still technically involved and I'm not just aware of what's going on through meetings. With these points in mind, what should a SA bring to the table? Should they come in with a mentality of "laying down the law" (so to speak) and enforcing the usage of certain tools to fit "their way," i.e., coding guidelines, source control, patterns, UML documentation, etc.? Or should they specify initial direction and strategy then be laid back and jump in as needed to correct the ship's direction? Depending on the organization this might not work. An SA who relies on TFS to enforce everything may struggle to implement their plan at an employer that only uses StarTeam. Similarly, an SA needs to be flexible depending on the stage of the project. If it's a fresh project they have more choices, whereas they might have less for existing projects. Here are some SA stories I have experienced as a way of sharing some background in hopes that answers to my questions might also shed some light on these issues: I've worked with an SA who code reviewed literally every single line of code of the team. The SA would do this for not just our project but other projects in the organization (imagine the time spent on this). At first it was useful to enforce certain standards, but later it became crippling. FxCop was how the SA would find issues. Don't get me wrong, it was a good way to teach junior developers and force them to think of the consequences of their chosen approach, but for senior developers it was seen as somewhat draconian. One particular SA was against the use of a certain library, claiming it was slow. This forced us to write tons of code to achieve things differently while the other library would've saved us a lot of time. Fast forward to the last month of the project and the clients were complaining about performance. The only solution was to change certain functionality to use the originally ignored approach despite early warnings from the devs. By that point a lot of code was thrown out and not reusable, leading to overtime and stress. Sadly the estimates used for the project were based on the old approach which my project was forbidden from using so it wasn't an appropriate indicator for estimation. I would hear the PM say "we've done this before," when in reality they had not since we were using a new library and the devs working on it were not the same devs used on the old project. The SA who would enforce the usage of DTOs, DOs, BOs, Service layers and so on for all projects. New devs had to learn this architecture and the SA adamantly enforced usage guidelines. Exceptions to usage guidelines were made when it was absolutely difficult to follow the guidelines. The SA was grounded in their approach. Classes for DTOs and all CRUD operations were generated via CodeSmith and database schemas were another similar ball of wax. However, having used this setup everywhere, the SA was not open to new technologies such as LINQ to SQL or Entity Framework. I am not using this post as a platform for venting. There were positive and negative aspects to my experiences with the SA stories mentioned above. My questions boil down to: What should an SA bring to the table? How can they strike a balance in their decision making? Should one approach an SA job (as defined earlier) with the mentality that they must enforce certain ground rules? Anything else to consider? Thanks! I'm sure these job tasks are easily extended to people who are senior devs or technical leads, so feel free to answer at that capacity as well.

  Read the article

• SQLCMD Mode: give it one more chance

  - by Maria Zakourdaev

    - Click on me. Choose me. - asked one forgotten feature when some bored DBA was purposelessly wondering through the Management Studio menu at the end of her long and busy working day. - Why would I use you? I have heard of no one who does. What are you for? - perplexedly wondered aged and wise DBA. At least that DBA thought she was aged and wise though each day tried to prove to her that she wasn't. - I know you. You are quite lazy. Why would you do additional clicks to move from window to window? From Tool to tool ? This is irritating, isn't it? I can run windows system commands, sql statements and much more from the same script, from the same query window! - I have all my tools that I‘m used to, I have Management Studio, Cmd, Powershell. They can do anything for me. I don’t need additional tools. - I promise you, you will like me. – the thing continued to whine . - All right, show me. – she gave up. It’s always this way, she thought sadly, - easier to agree than to explain why you don’t want. - Enable me and then think about anything that you always couldn’t do through the management studio and had to use other tools. - Ok. Google for me the list of greatest features of SQL SERVER 2012. - Well... I’m not sure... Think about something else. - Ok, here is something easy for you. I want to check if file folder exists or if file is there. Though, I can easily do this using xp_cmdshell … - This is easy for me. – rejoiced the feature. By the way, having the items of the menu talking to you usually means you should stop working and go home. Or drink coffee. Or both. Well, aged and wise dba wasn’t thinking about the weirdness of the situation at that moment. - After enabling me, – said unfairly forgotten feature (it was thinking of itself in such manner) – after enabling me you can use all command line commands in the same management studio query window by adding two exclamation marks !! at the beginning of the script line to denote that you want to use cmd command: -Just keep in mind that when using this feature, you are actually running the commands ON YOUR computer and not on SQL server that query window is connected to. This is main difference from using xp_cmdshell which is executing commands on sql server itself. Bottomline, use UNC path instead of local path. - Look, there are much more than that. - The SQLCMD feature was getting exited.- You can get IP of your servers, create, rename and drop folders. You can see the contents of any file anywhere and even start different tools from the same query window: Not so aged and wise DBA was getting interested: - I also want to run different scripts on different servers without changing connection of the query window. - Sure, sure! Another great feature that CMDmode is providing us with and giving more power to querying. Use “:” to use additional features, like :connect that allows you to change connection: - Now imagine, you have one script where you have all your changes, like creating staging table on the DWH staging server, adding fact table to DWH itself and updating stored procedures in the server where reporting database is located. - Now, give me more challenges! - Script out a list of stored procedures into the text files. - You can do it easily by using command :out which will write the query results into the specified text file. The output can be the code of the stored procedure or any data. Actually this is the same as changing the query output into the file instead of the grid. - Now, take all of the scripts and run all of them, one by one, on the different server.  - Easily - Come on... I’m sure that you can not... -Why not? Naturally, I can do it using :r commant which is opening a script and executing it. Look, I can also use :setvar command to define an environment variable in SQLCMD mode. Just note that you have to leave the empty string between :r commands, otherwise it’s not working although I have no idea why. - Wow.- She was really impressed. - Ok, I’ll go to try all those… -Wait, wait! I know how to google the SQL SERVER features for you! This example will open chrome explorer with search results for the “SQL server 2012 top features” ( change the path to suit your PC): “Well, this can be probably useful stuff, maybe this feature is really unfairly forgotten”, thought the DBA while going through the dark empty parking lot to her lonely car. “As someone really wise once said: “It is what we think we know that keeps us from learning. Learn, unlearn and relearn”.

  Read the article

• SQL SERVER – What is Incremental Statistics? – Performance improvements in SQL Server 2014 – Part 1

  - by Pinal Dave

  This is the first part of the series Incremental Statistics. Here is the index of the complete series. What is Incremental Statistics? – Performance improvements in SQL Server 2014 – Part 1 Simple Example of Incremental Statistics – Performance improvements in SQL Server 2014 – Part 2 DMV to Identify Incremental Statistics – Performance improvements in SQL Server 2014 – Part 3 Statistics are considered one of the most important aspects of SQL Server Performance Tuning. You might have often heard the phrase, with related to performance tuning. “Update Statistics before you take any other steps to tune performance”. Honestly, I have said above statement many times and many times, I have personally updated statistics before I start to do any performance tuning exercise. You may agree or disagree to the point, but there is no denial that Statistics play an extremely vital role in the performance tuning. SQL Server 2014 has a new feature called Incremental Statistics. I have been playing with this feature for quite a while and I find that very interesting. After spending some time with this feature, I decided to write about this subject over here. New in SQL Server 2014 – Incremental Statistics Well, it seems like lots of people wants to start using SQL Server 2014′s new feature of Incremetnal Statistics. However, let us understand what actually this feature does and how it can help. I will try to simplify this feature first before I start working on the demo code. Code for all versions of SQL Server Here is the code which you can execute on all versions of SQL Server and it will update the statistics of your table. The keyword which you should pay attention is WITH FULLSCAN. It will scan the entire table and build brand new statistics for you which your SQL Server Performance Tuning engine can use for better estimation of your execution plan. UPDATE STATISTICS TableName(StatisticsName) WITH FULLSCAN Who should learn about this? Why? If you are using partitions in your database, you should consider about implementing this feature. Otherwise, this feature is pretty much not applicable to you. Well, if you are using single partition and your table data is in a single place, you still have to update your statistics the same way you have been doing. If you are using multiple partitions, this may be a very useful feature for you. In most cases, users have multiple partitions because they have lots of data in their table. Each partition will have data which belongs to itself. Now it is very common that each partition are populated separately in SQL Server. Real World Example For example, if your table contains data which is related to sales, you will have plenty of entries in your table. It will be a good idea to divide the partition into multiple filegroups for example, you can divide this table into 3 semesters or 4 quarters or even 12 months. Let us assume that we have divided our table into 12 different partitions. Now for the month of January, our first partition will be populated and for the month of February our second partition will be populated. Now assume, that you have plenty of the data in your first and second partition. Now the month of March has just started and your third partition has started to populate. Due to some reason, if you want to update your statistics, what will you do? In SQL Server 2012 and earlier version You will just use the code of WITH FULLSCAN and update the entire table. That means even though you have only data in third partition you will still update the entire table. This will be VERY resource intensive process as you will be updating the statistics of the partition 1 and 2 where data has not changed at all. In SQL Server 2014 You will just update the partition of Partition 3. There is a special syntax where you can now specify which partition you want to update now. The impact of this is that it is smartly merging the new data with old statistics and update the entire statistics without doing FULLSCAN of your entire table. This has a huge impact on performance. Remember that the new feature in SQL Server 2014 does not change anything besides the capability to update a single partition. However, there is one feature which is indeed attractive. Previously, when table data were changed 20% at that time, statistics update were triggered. However, now the same threshold is applicable to a single partition. That means if your partition faces 20% data, change it will also trigger partition level statistics update which, when merged to your final statistics will give you better performance. In summary If you are not using a partition, this feature is not applicable to you. If you are using a partition, this feature can be very helpful to you. Tomorrow: We will see working code of SQL Server 2014 Incremental Statistics. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: SQL Statistics, Statistics

  Read the article

• Part 1 - 12c Database and WLS - Overview

  - by Steve Felts

  The download of Oracle 12c database became available on June 25, 2013.  There are some big new features in 12c database and WebLogic Server will take advantage of them. Immediately, we will support using 12c database and drivers with WLS 10.3.6 and 12.1.1.  When the next version of WLS ships, additional functionality will be supported (those rows in the table below with all "No" values will get a "Yes).  The following table maps the Oracle 12c Database features supported with various combinations of currently available WLS releases, 11g and 12c Drivers, and 11g and 12c Databases. Feature WebLogic Server 10.3.6/12.1.1 with 11g drivers and 11gR2 DB WebLogic Server 10.3.6/12.1.1 with 11g drivers and 12c DB WebLogic Server 10.3.6/12.1.1 with 12c drivers and 11gR2 DB WebLogic Server 10.3.6/12.1.1 with 12c drivers and 12c DB JDBC replay No No No Yes (Active GridLink only in 10.3.6, add generic in 12.1.1) Multi Tenant Database No Yes (except set container) No Yes (except set container) Dynamic switching between Tenants No No No No Database Resident Connection pooling (DRCP) No No No No Oracle Notification Service (ONS) auto configuration No No No No Global Database Services (GDS) No Yes (Active GridLink only) No Yes (Active GridLink only) JDBC 4.1 (using ojdbc7.jar files & JDK 7) No No Yes Yes  The My Oracle Support (MOS) document covering this is "WebLogic Server 12.1.1 and 10.3.6 Support for Oracle 12c Database [ID 1564509.1]" at the link https://support.oracle.com/epmos/faces/DocumentDisplay?id=1564509.1. The following documents are also key references:12c Oracle Database Developer Guide http://docs.oracle.com/cd/E16655_01/appdev.121/e17620/toc.htm 12c Oracle Database Administrator's Guide http://docs.oracle.com/cd/E16655_01/server.121/e17636/toc.htm . I plan to write some related blog articles not to duplicate existing product documentation but to introduce the features, provide some examples, and tie together some information to make it easier to understand. How do you get started with 12c?  The easiest way is to point your data source at a 12c database.  The only change on the WLS side is to update the URL in your data source (assuming that you are not just upgrading your database).  You can continue to use the 11.2.0.3 driver jar files that shipped with WLS 10.3.6 or 12.1.1.  You shouldn't see any changes in your application.  You can take advantage of enhancements on the database side that don't affect the mid-tier.  On the WLS side, you can take advantage of using Global Data Service or connecting to a tenant in a multi-tenant database transparently. If you want to use the 12c client jar files, it's a bit of work because they aren't shipped with WLS and you can't just drop in ojdbc6.jar as in the old days.  You need to use a matched set of jar files and they need to come before existing jar files in the CLASSPATH.  The MOS article is written from the standpoint that you need to get the jar files directly - download almost 1G and install over 600M footprint to get 15 jar files.  Assuming that you have the database installed and you can get access to the installation (or ask the DBA), you need to copy the 15 jar files to each machine with a WLS installation and get them in your CLASSPATH.  You can play with setting the PRE_CLASSPATH but the more practical approach may be to just update WL_HOME/common/bin/commEnv.sh directly.  There's a change in the transaction completion behavior (read the MOS) so if you think you might run into that, you will want to set -Doracle.jdbc.autoCommitSpecCompliant=false.  Also if you are running with Active GridLink, you must set -Doracle.ucp.PreWLS1212Compatible=true (how's that for telling you that this is fixed in WLS 12.1.2).  Once you get the configuration out of the way, you can start using the new ojdbc7.jar in place of the ojdbc6.jar to get the new JDBC 4.1 API's.  You can also start using Application Continuity.  This feature is also known as JDBC Replay because when a connection fails you get a new one with all JDBC operations up to the failure point automatically replayed.  As you might expect, there are some limitations but it's an interesting feature.  Obviously I'm going to focus on the 12c database features that we can leverage in WLS data source.  You will need to read other sources or the product documentation to get all of the new features.

  Read the article

• Create Advanced Panoramas with Microsoft Image Composite Editor

  - by Matthew Guay

  Do you enjoy making panoramas with your pictures, but want more features than tools like Live Photo Gallery offer?  Here’s how you can create amazing panoramas for free with the Microsoft Image Composite Editor. Yesterday we took a look at creating panoramic photos in Windows Live Photo Gallery. Today we take a look at a free tool from Microsoft that will give you more advanced features to create your own masterpiece. Getting Started Download Microsoft Image Composite Editor from Microsoft Research (link below), and install as normal.  Note that there are separate version for 32 & 64-bit editions of Windows, so make sure to download the correct one for your computer. Once it’s installed, you can proceed to create awesome panoramas and extremely large image combinations with it.  Microsoft Image Composite Editor integrates with Live Photo Gallery, so you can create more advanced panoramic pictures directly.  Select the pictures you want to combine, click Extras in the menu bar, and select Create Image Composite. You can also create a photo stitch directly from Explorer.  Select the pictures you want to combine, right-click, and select Stitch Images… Or, simply launch the Image Composite Editor itself and drag your pictures into its editor.  Either way you start a image composition, the program will automatically analyze and combine your images.  This application is optimized for multiple cores, and we found it much faster than other panorama tools such as Live Photo Gallery. Within seconds, you’ll see your panorama in the top preview pane. From the bottom of the window, you can choose a different camera motion which will change how the program stitches the pictures together.  You can also quickly crop the picture to the size you want, or use Automatic Crop to have the program select the maximum area with a continuous picture.   Here’s how our panorama looked when we switched the Camera Motion to Planar Motion 2. But, the real tweaking comes in when you adjust the panorama’s projection and orientation.  Click the box button at the top to change these settings. The panorama is now overlaid with a grid, and you can drag the corners and edges of the panorama to change its shape. Or, from the Projection button at the top, you can choose different projection modes. Here we’ve chosen Cylinder (Vertical), which entirely removed the warp on the walls in the image.  You can pan around the image, and get the part you find most important in the center.  Click the Apply button on the top when you’re finished making changes, or click Revert if you want to switch to the default view settings. Once you’ve finished your masterpiece, you can export it easily to common photo formats from the Export panel on the bottom.  You can choose to scale the image or set it to a maximum width and height as well.  Click Export to disk to save the photo to your computer, or select Publish to Photosynth to post your panorama online. Alternately, from the File menu you can choose to save the panorama as .spj file.  This preserves all of your settings in the Image Composite Editor so you can edit it more in the future if you wish.   Conclusion Whether you’re trying to capture the inside of a building or a tall tree, the extra tools in Microsoft Image Composite Editor let you make nicer panoramas than you ever thought possible.  We found the final results surprisingly accurate to the real buildings and objects, especially after tweaking the projection modes.  This tool can be both fun and useful, so give it a try and let us know what you’ve found it useful for. Works with 32 & 64-bit versions of XP, Vista, and Windows 7 Link Download Microsoft Image Composite Editor Similar Articles Productive Geek Tips Change or Set the Greasemonkey Script Editor in FirefoxNew Vista Syntax for Opening Control Panel Items from the Command-lineTune Your ClearType Font Settings in Windows VistaChange the Default Editor From Nano on Ubuntu LinuxMake MSE Create a Restore Point Before Cleaning Malware TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor

  Read the article

• Visual Studio Load Testing using Windows Azure

  - by Tarun Arora

  In my opinion the biggest adoption barrier in performance testing on smaller projects is not the tooling but the high infrastructure and administration cost that comes with this phase of testing. Only if a reusable solution was possible and infrastructure management wasn’t as expensive, adoption would certainly spike. It certainly is possible if you bring Visual Studio and Windows Azure into the equation. It is possible to run your test rig in the cloud without getting tangled in SCVMM or Lab Management. All you need is an active Azure subscription, Windows Azure endpoint enabled developer workstation running visual studio ultimate on premise, windows azure endpoint enabled worker roles on azure compute instances set up to run as test controllers and test agents. My test rig is running SQL server 2012 and Visual Studio 2012 RC agents. The beauty is that the solution is reusable, you can open the azure project, change the subscription and certificate, click publish and *BOOM* in less than 15 minutes you could have your own test rig running in the cloud. In this blog post I intend to show you how you can use the power of Windows Azure to effectively abstract the administration cost of infrastructure management and lower the total cost of Load & Performance Testing. As a bonus, I will share a reusable solution that you can use to automate test rig creation for both VS 2010 agents as well as VS 2012 agents. Introduction The slide show below should help you under the high level details of what we are trying to achive... Leveraging Azure for Performance Testing View more PowerPoint from Avanade Scenario 1 – Running a Test Rig in Windows Azure To start off with the basics, in the first scenario I plan to discuss how to, - Automate deployment & configuration of Windows Azure Worker Roles for Test Controller and Test Agent - Automate deployment & configuration of SQL database on Test Controller on the Test Controller Worker Role - Scaling Test Agents on demand - Creating a Web Performance Test and a simple Load Test - Managing Test Controllers right from Visual Studio on Premise Developer Workstation - Viewing results of the Load Test - Cleaning up - Have the above work in the shape of a reusable solution for both VS2010 and VS2012 Test Rig Scenario 2 – The scaled out Test Rig and sharing data using SQL Azure A scaled out version of this implementation would involve running multiple test rigs running in the cloud, in this scenario I will show you how to sync the load test database from these distributed test rigs into one SQL Azure database using Azure sync. The selling point for this scenario is being able to collate the load test efforts from across the organization into one data store. - Deploy multiple test rigs using the reusable solution from scenario 1 - Set up and configure Windows Azure Sync - Test SQL Azure Load Test result database created as a result of Windows Azure Sync - Cleaning up - Have the above work in the shape of a reusable solution for both VS2010 and VS2012 Test Rig The Ingredients Though with an active MSDN ultimate subscription you would already have access to everything and more, you will essentially need the below to try out the scenarios, 1. Windows Azure Subscription 2. Windows Azure Storage – Blob Storage 3. Windows Azure Compute – Worker Role 4. SQL Azure Database 5. SQL Data Sync 6. Windows Azure Connect – End points 7. SQL 2012 Express or SQL 2008 R2 Express 8. Visual Studio All Agents 2012 or Visual Studio All Agents 2010 9. A developer workstation set up with Visual Studio 2012 – Ultimate or Visual Studio 2010 – Ultimate 10. Visual Studio Load Test Unlimited Virtual User Pack. Walkthrough To set up the test rig in the cloud, the test controller, test agent and SQL express installers need to be available when the worker role set up starts, the easiest and most efficient way is to pre upload the required software into Windows Azure Blob storage. SQL express, test controller and test agent expose various switches which we can take advantage of including the quiet install switch. Once all the 3 have been installed the test controller needs to be registered with the test agents and the SQL database needs to be associated to the test controller. By enabling Windows Azure connect on the machines in the cloud and the developer workstation on premise we successfully create a virtual network amongst the machines enabling 2 way communication. All of the above can be done programmatically, let’s see step by step how… Scenario 1 Video Walkthrough–Leveraging Windows Azure for performance Testing Scenario 2 Work in progress, watch this space for more… Solution If you are still reading and are interested in the solution, drop me an email with your windows live id. I’ll add you to my TFS preview project which has a re-usable solution for both VS 2010 and VS 2012 test rigs as well as guidance and demo performance tests.   Conclusion Other posts and resources available here. Possibilities…. Endless!

  Read the article

• MSSQL: Copying data from one database to another

  - by DigiMortal

  I have database that has data imported from another server using import and export wizard of SQL Server Management Studio. There is also empty database with same tables but it also has primary keys, foreign keys and indexes. How to get data from first database to another? Here is the description of my crusade. And believe me – it is not nice one. Bugs in import and export wizard There is some awful bugs in import and export wizard that makes data imports and exports possible only on very limited manner: wizard is not able to analyze foreign keys, wizard wants to create tables always, whatever you say in settings. The result is faulty and useless package. Now let’s go step by step and make things work in our scenario. Database There are two databases. Let’s name them like this: PLAIN – contains data imported from remote server (no indexes, no keys, no nothing, just plain dumb data) CORRECT – empty database with same structure as remote database (indexes, keys and everything else but no data) Our goal is to get data from PLAIN to CORRECT. 1. Create import and export package In this point we will create faulty SSIS package using SQL Server Management Studio. Run import and export wizard and let it create SSIS package that reads data from CORRECT and writes it to, let’s say, CORRECT-2. Make sure you enable identity insert. Make sure there are no views selected. Make sure you don’t let package to create tables (you can miss this step because it wants to create tables anyway). Save package to SSIS. 2. Modify import and export package Now let’s clean up the package and remove all faulty crap. Connect SQL Server Management Studio to SSIS instance. Select the package you just saved and export it to your hard disc. Run Business Intelligence Studio. Create new SSIS project (DON’T MISS THIS STEP). Add package from disc as existing item to project and open it. Move to Control Flow page do one of following: Remove all preparation SQL-tasks and connect Data Flow tasks. Modify all preparation SQL-tasks so the existence of tables is checked before table is created (yes, you have to do it manually). Add new Execute-SQL task as first task in control flow: Open task properties. Assign destination connection as connection to use. Insert the following SQL as command:   EXEC sp_MSForEachTable 'ALTER TABLE ? NOCHECK CONSTRAINT ALL' GO   EXEC sp_MSForEachTable 'DELETE FROM ?' GO   Save task. Add new Execute-SQL task as last task in control flow: Open task properties. Assign destination connection as connection to use. Insert the following SQL as command:   EXEC sp_MSForEachTable 'ALTER TABLE ? CHECK CONSTRAINT ALL' GO   Save task Now connect first Execute-SQL task with first Data Flow task and last Data Flow task with second Execute-SQL task. Now move to Package Explorer tab and change connections under Connection Managers folder. Make source connection to use database PLAIN. Make destination connection to use database CORRECT. Save package and rebuilt the project. Update package using SQL Server Management Studio. Some hints: Make sure you take the package from solution folder because it is saved there now. Don’t overwrite existing package. Use numeric suffix and let Management Studio to create a new version of package. Now you are done with your package. Run it to test it and clean out all the errors you find. TRUNCATE vs DELETE You can see that I used DELETE FROM instead of TRUNCATE. Why? Because TRUNCATE has some nasty limits (taken from MSDN): “You cannot use TRUNCATE TABLE on a table referenced by a FOREIGN KEY constraint; instead, use DELETE statement without a WHERE clause. Because TRUNCATE TABLE is not logged, it cannot activate a trigger. TRUNCATE TABLE may not be used on tables participating in an indexed view.” As I am not sure what tables you have and how they are used I provided here the solution that should work for all scenarios. If you need better performance then in some cases you can use TRUNCATE table instead of DELETE. Conclusion My conclusion is bitter this time although I am very positive guy. It is A.D. 2010 and still we have to write stupid hacks for simple things. Simple tools that existed before are long gone and we have to live mysterious bloatware that is our only choice when using default tools. If you take a look at the length of this posting and the count of steps I had to do for one easy thing you should treat it as a signal that something has went wrong in last years. Although I got my job done I would be still more happy if out of box tools are more intelligent one day. References T-SQL Trick for Deleting All Data in Your Database (Mauro Cardarelli) TRUNCATE TABLE (MSDN Library) Error Handling in SQL 2000 – a Background (Erland Sommarskog) Disable/Enable Foreign Key and Check constraints in SQL Server (Decipher)

  Read the article

• ISACA Webcast follow up: Managing High Risk Access and Compliance with a Platform Approach to Privileged Account Management

  - by Darin Pendergraft

  Last week we presented how Oracle Privileged Account Manager (OPAM) could be used to manage high risk, privileged accounts.  If you missed the webcast, here is a link to the replay: ISACA replay archive (NOTE: you will need to use Internet Explorer to view the archive) For those of you that did join us on the call, you will know that I only had a little bit of time for Q&A, and was only able to answer a few of the questions that came in.  So I wanted to devote this blog to answering the outstanding questions.  Here they are. 1. Can OPAM track admin or DBA activity details during a password check-out session? Oracle Audit Vault is monitoring these activities which can be correlated to check-out events. 2. How would OPAM handle simultaneous requests? OPAM can be configured to allow for shared passwords.  By default sharing is turned off. 3. How long are the passwords valid?  Are the admins required to manually check them in? Password expiration can be configured and set in the password policy according to your corporate standards.  You can specify if you want forced check-in or not. 4. Can 2-factor authentication be used with OPAM? Yes - 2-factor integration with OPAM is provided by integration with Oracle Access Manager, and Oracle Adaptive Access Manager. 5. How do you control access to OPAM to ensure that OPAM admins don't override the functionality to access privileged accounts? OPAM provides separation of duties by using Admin Roles to manage access to targets and privileged accounts and to control which operations admins can perform. 6. How and where are the passwords stored in OPAM? OPAM uses Oracle Platform Security Services (OPSS) Credential Store Framework (CSF) to securely store passwords.  This is the same system used by Oracle Applications. 7. Does OPAM support hierarchical/level based privileges?  Is the log maintained for independent review/audit? Yes. OPAM uses the Fusion Middleware (FMW) Audit Framework to store all OPAM related events in a dedicated audit database.  8. Does OPAM support emergency access in the case where approvers are not available until later? Yes.  OPAM can be configured to release a password under a "break-glass" emergency scenario. 9. Does OPAM work with AIX? Yes supported UNIX version are listed in the "certified component section" of the UNIX connector guide at:http://docs.oracle.com/cd/E22999_01/doc.111/e17694/intro.htm#autoId0 10. Does OPAM integrate with Sun Identity Manager? Yes.  OPAM can be integrated with SIM using the REST  APIs.  OPAM has direct integration with Oracle Identity Manager 11gR2. 11. Is OPAM available today and what does it cost? Yes.  OPAM is available now.  Ask your Oracle Account Manager for pricing. 12. Can OPAM be used in SAP environments? Yes, supported SAP version are listed in the "certified component section" of the SAP  connector guide here: http://docs.oracle.com/cd/E22999_01/doc.111/e25327/intro.htm#autoId0 13. How would this product integrate, if at all, with access to a particular field in the DB that need additional security such as SSN's? OPAM can work with DB Vault and DB Firewall to provide the fine grained access control for databases. 14. Is VM supported? As a deployment platform Oracle VM is supported. For further details about supported Virtualization Technologies see Oracle Fusion Middleware Supported System configurations here: http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html 15. Where did this (OPAM) technology come from? OPAM was built by Oracle Engineering. 16. Are all Linux flavors supported?  How about BSD? BSD is not supported. For supported UNIX version see the "certified component section" of the UNIX connector guide http://docs.oracle.com/cd/E22999_01/doc.111/e17694/intro.htm#autoId0 17. What happens if users don't check passwords in at the end of a work task? In OPAM a time frame can be defined how long a password can be checked out. The security admin can force a check-in at any given time. 18. is MySQL supported? Yes, supported DB version are listed in the "certified component section" of the DB connector guide here: http://docs.oracle.com/cd/E22999_01/doc.111/e28315/intro.htm#BABGJJHA 19. What happens when OPAM crashes and you need to use the password? OPAM can be configured for high availability, but if required, OPAM data can be backed up/recovered.  See the OPAM admin guide. 20. Is OPAM Standalone product or does it leverage other components from IDM? OPAM can be run stand-alone, but will also leverage other IDM components

  Read the article

• Populate a WCF syndication podcast using MP3 ID3 metadata tags

  - by brian_ritchie

  In the last post, I showed how to create a podcast using WCF syndication.  A podcast is an RSS feed containing a list of audio files to which users can subscribe.  The podcast not only contains links to the audio files, but also metadata about each episode.  A cool approach to building the feed is reading this metadata from the ID3 tags on the MP3 files used for the podcast. One library to do this is TagLib-Sharp.  Here is some sample code: .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: Consolas, "Courier New", Courier, Monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 1: var taggedFile = TagLib.File.Create(f); 2: var fileInfo = new FileInfo(f); 3: var item = new iTunesPodcastItem() 4: { 5: title = taggedFile.Tag.Title, 6: size = fileInfo.Length, 7: url = feed.baseUrl + fileInfo.Name, 8: duration = taggedFile.Properties.Duration, 9: mediaType = feed.mediaType, 10: summary = taggedFile.Tag.Comment, 11: subTitle = taggedFile.Tag.FirstAlbumArtist, 12: id = fileInfo.Name 13: }; 14: if (!string.IsNullOrEmpty(taggedFile.Tag.Album)) 15: item.publishedDate = DateTimeOffset.Parse(taggedFile.Tag.Album); This reads the ID3 tags into an object for later use in creating the syndication feed.  When the MP3 is created, these tags are set...or they can be set after the fact using the Properties dialog in Windows Explorer.  The only "hack" is that there isn't an easily accessible tag for "subtitle" or "published date" so I used other tags in this example. Feel free to change this to meet your purposes.  You could remove the subtitle & use the file modified data for example. That takes care of the episodes, for the feed level settings we'll load those from an XML file: .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: Consolas, "Courier New", Courier, Monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 1: <?xml version="1.0" encoding="utf-8" ?> 2: <iTunesPodcastFeed 3: baseUrl ="" 4: title="" 5: subTitle="" 6: description="" 7: copyright="" 8: category="" 9: ownerName="" 10: ownerEmail="" 11: mediaType="audio/mp3" 12: mediaFiles="*.mp3" 13: imageUrl="" 14: link="" 15: /> Here is the full code put together. Read the feed XML file and deserialize it into an iTunesPodcastFeed classLoop over the files in a directory reading the ID3 tags from the audio files .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: Consolas, "Courier New", Courier, Monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 1: public static iTunesPodcastFeed CreateFeedFromFiles(string podcastDirectory, string podcastFeedFile) 2: { 3: XmlSerializer serializer = new XmlSerializer(typeof(iTunesPodcastFeed)); 4: iTunesPodcastFeed feed; 5: using (var fs = File.OpenRead(Path.Combine(podcastDirectory, podcastFeedFile))) 6: { 7: feed = (iTunesPodcastFeed)serializer.Deserialize(fs); 8: } 9: foreach (var f in Directory.GetFiles(podcastDirectory, feed.mediaFiles)) 10: { 11: try 12: { 13: var taggedFile = TagLib.File.Create(f); 14: var fileInfo = new FileInfo(f); 15: var item = new iTunesPodcastItem() 16: { 17: title = taggedFile.Tag.Title, 18: size = fileInfo.Length, 19: url = feed.baseUrl + fileInfo.Name, 20: duration = taggedFile.Properties.Duration, 21: mediaType = feed.mediaType, 22: summary = taggedFile.Tag.Comment, 23: subTitle = taggedFile.Tag.FirstAlbumArtist, 24: id = fileInfo.Name 25: }; 26: if (!string.IsNullOrEmpty(taggedFile.Tag.Album)) 27: item.publishedDate = DateTimeOffset.Parse(taggedFile.Tag.Album); 28: feed.Items.Add(item); 29: } 30: catch 31: { 32: // ignore files that can't be accessed successfully 33: } 34: } 35: return feed; 36: } Usually putting a "try...catch" like this is bad, but in this case I'm just skipping over files that are locked while they are being uploaded to the web site.Here is the code from the last couple of posts.  

  Read the article

• Great event : Microsoft Visual Studio 2010 Launch @ Microsoft TechEd Blore

  - by sathya

  Great event : Microsoft Visual Studio 2010 Launch @ Microsoft TechEd Blore   I was really excited on attending the day 1 of Microsoft TechEd 2010 in Bangalore. This is the first Teched that am attending. The event was really fun filled with lot of knowledge sharing sessions and lots of goodies and gifts by the partners Initially the Event Started by Murthy's Session. He explained about the Developers relating to the 5 elements of nature (Pancha Boothaas) 1. Fire - Passion 2. Wave (Water) - Catch the right wave which we need to apply. 3. Earth - Connections and lots of opportunities around the world 4. Air -  Its whatever we breathe. Developers.. Without them nothing is possible. they are like the air 5. Sky - Cloud based applications   Next the Keynote and the announcement of Visual Studio by SomaSegar. List of things that he delivered his speech on : 1. Announcement of Visual Studio 2010 2. Announcement of .NET 4.0 3. Announcement of Silverlight later this week 4. What is the current Trend? Microsoft has done a research with many developers across the globe and have got the following feedback from the users. Get Lost (interrupted) - When we do some work and somebody is calling or interrepting by someother way we lose track of what we were doing and we need to do from the start Falling Behind- Technology gets updated  phenomenally over a period of time and developers always have a scenario like they are not in the state of the art technology and they always have a doubt whether they are staying updated. Lack of Collobaration - When a Manager asks a person what the team members have done and some might be done and some might not be and finally all are into a state like we dont know where we are. So they have addressed these 3 points in the VS 2010 by the following features : Get Lost - Some cool features which could overcome this. We have some Graphical interface. which could show what we have done and where we are. Some Zoom features in the code level. Falling Behind - Everything is based on .NET language base. 2010 has been built in such a way that if developers know the native language that's enough for building good applications. Lack of Collobaration - Some Dashboard Features which would show where exactly the project is. And a graphical user interface is shown on clicking which it directly drills down even to the code level. 5. An overview on all new features in VS 2010. 6. Some good demos of new features in VS 2010 by Polita and one more girl. Some of the new features included : 1. Team Explorer 2. Zoom in Code 3. Ribbon Development 4. Development in Single Platform for Windows Phone, XBox, Zune, Azure, Web Based and Windows based applications 5. Sequence Diagram Generation directly from code 6. Dashboards to show project status 7. Javascript and JQuery intellisense 8. Native support for JQuery 9. Packaging feature while deploying. 10. Generation of different versions of web.config like Web.Config.Production, Web.Config.Staging, etc. 11. IntelliTrace - Eliminating the "Not Reproducible" statement. 12. Automated User Interface Testing. At last in the closing of the day we had a great event called Demo Extravaganza, where lot of cool projects that were launched by Microsoft and also the projects that are under research were also shown. I got a lot of info about Bing today. BING really rocks!!! It has the following : 1. Visual Search 2. Product based search. For each product different menu filters were provided to make an advanced search 3. BING Maps was awesome!! It zoomed in to the street level and we can assume that we are the persons who are walking or running on the road and we can see the real objects like buildings moving by our side. 4. PhotoSynth was used in BING to show up all the images taken around the globe in a 3D format. 5. Formula - If we give some formula it automatically gives the value for the variable or derivation of expression Also some info about some kool touch apps which does an authentication and computation of Teched Attendee's Points that they have scored and the sessions attended. One guy won an XBOX in lucky draw as a gift. There were lot of Partner Stalls like Accenture,Intel,Citrix,MicroFocus,Telerik,infragistics,Sapient etc. Some Offers were provided for us like 50% off on Certifications, 1 free Elearning Course, etc. Stay tuned!! Wil update you on other events too..

  Read the article

< Previous Page | 364 365 366 367 368 369 370 371 372 373 374 375  | Next Page >