Search Results

Search found 54067 results on 2163 pages for 'ubuntu 10 04'.

Page 368/2163 | < Previous Page | 364 365 366 367 368 369 370 371 372 373 374 375  | Next Page >

• VLC Ati Radeon 6870 Ubuntu 12.04 image skewed flicker

  - by Aaron

  I'm running Ubuntu 12.04 with ATI Radeon 6870 connected to my 40' Sharp TV. The video image is slightly jigged, like breaking a bit and slightly delayed. It just isn't smooth. The computer is very fast, like i7 with 12gb ram. I tried to run the same video with my mac laptop and on the tv with the same connection cable and it was running smoothly. i tried changing the video output in VLC to x11, increase caching, h264 skip loop filter to all, increase monitor refresh rate although it's already at 60 and it's an LCD tv. this is my xorg.conf : Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[3]-0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "Monitor" Identifier "0-DFP9" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1920x1080" EndSection Section "Monitor" Identifier "0-DFP10" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x1024" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" Identifier "amdcccle-Device[3]-0" Driver "fglrx" Option "Monitor-DFP9" "0-DFP9" BusID "PCI:3:0:0" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Screen" Identifier "amdcccle-Screen[3]-0" Device "amdcccle-Device[3]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Ubuntu 12.04 Precise on Dell Inspirion Duo

  - by Roman M. Kos

  I installed 12.04 version of Ubuntu on my Dell Inspiron Duo. After installing with help of program like UNetBootIn or smth like that. ( Besides i have no problem with kernel panic on chargin on/off like in 11.10. ) After that i followed with steps from here, in the first post here: http://ubuntuforums.org/showthread.php?t=1658635 There left one big problem with touchscreen: When i whant to drag with touchscreen like i`m doing it with mouse (for ex. selecting multile files with mouse) the selectable rectangular doesnot shows while im dragging, when dragging was finished (i put my finger off) it shows the rectangular and hides it. This thing disables all my tries to drag a window or smth else.... Also some time after using touchscreen such things are disabeling: - Often - click from a mouse (after keyboard using functinality restores) - less often - mouse movement disables (sometimes restores sometimes not) - lesser than other - keyboards works but no sygnals accepting (keyoards has indicator, so thay react, mouse of course not) The test from eTouchU utility passes perfeclty. Any idia for solving this problem? P.S.: Im from Ukraine, so sorry if my possible grammar mistakes. P.P.S.: Besides how to know the physicall position of my tabled mode? For automaticall rotating. Like on each rotation do some script.

  Read the article

• Is it possible to to have all pre-unity effects in latest ubuntu?

  - by iamserious

  I've been an Ubuntu dilettante for a long, long time. It is not my primary OS but I've always had it on all my laptops and desktop machines for over 8 years now. What I really, really like(d) about ubuntu (or linux, for that matter) was the effects - desktop cube, wobbly windows and other such "cool" effects. Needless to say, I was heartbroken with Unity. I gave it the benefit of doubt and tried to like it, tried to love it. Stuck with it for over a year. But I recently came to the conclusion that unity is really not for me. I want my old ubuntu back, with all it's eye candy effects. I tried messing around with ccsm but it only seemed to make the matters worse. Now, I could just install the old version of ubuntu - but getting my bamboo pen and Nvidia to work with it is a son of a.. anyway, the point is, old version of ubuntu is outdated to work with my newer machines. I'd rather have a new version of ubuntu but without unity- I don't know what the eye candy stuff is called - and so my question is this - Is it possible to rid ubuntu of unity and get all the eye candy stuff and if it is not possible, can you please advice me what other linux supports all the effects, please? I've searched high and low for unity alternatives but didn't find any satisfactory solutions; so I think my question is mainly about what other linux flavour is better suited for the task - sorry if it is out of topic.

  Read the article

• Webcam doesn't work in Ubuntu 12.10

  - by Kzhi

  I have Gembird cam68ut. On my Ubuntu 12.10 it shows black screen in cheese and guvcview. I tested it in win7, it works fine. Here what I found: It is a uvc compliant camera, I checked on the site: 18ec:3299 USB 2.0 PC Camera (model number QC3231) ArkMicro This webcam is report by lsusb: Bus 001 Device 004: ID 18ec:3299 Arkmicro Technologies Inc. Here is the output of dmesg | tail: uvcvideo: Found UVC 1.00 device USB2.0 PC CAMERA (18ec:3299) uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. input: USB2.0 PC CAMERA as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input17 usbcore: registered new interface driver uvcvideo USB Video Class driver (1.1.1) When I run cheese (or guvcview), here what I get in terminal: libv4l2: error turning on stream: No space left on device (cheese:11797): cheese-WARNING **: Internal data flow error. I tried it on different usb slots with the same results The Webcam's microphone works, I can record audio with it Guys, any thoughts on what can be done to make it work?

  Read the article

• Davicom DM9601 USB LAN NIC Ubuntu 11.10 issue

  - by Gaurav_Java

  I have a davicom dm9601 USB ethernet card. When I plug in the device, it is detected and drivers are loaded, but I can't connect to internet using it. It works perfectly on XP, other laptop but not working on Ubuntu 11.10 How can I install the driver for this? I have tried many things But nothing is working. If I go to this link driver but not compiling or may I be doing something wrong. I found this one but don't know how to follow these steps . This is my lsusb output: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314] Bus 003 Device 002: ID 08ff:1600 AuthenTec, Inc. AES1600 Bus 005 Device 002: ID 0a46:9601 Davicom Semiconductor, Inc. DM9601 Fast Ethernet Adapter Bus 006 Device 002: ID 046d:c045 Logitech, Inc. Optical Mouse Bus 003 Device 003: ID 0a5c:2101 Broadcom Corp. Bluetooth Controller Bus 004 Device 002: ID 04d9:1702 Holtek Semiconductor, Inc. But when I connected my Internet from different system its start working.

  Read the article

• Ubuntu stops using Nvidia driver after kernel upgrade

  - by Daniel

  Just updated and restarted, Ubuntu's doesn't display correctly. After restart, the desktop now looks like this. I've temporarily switched to the Nouveau driver. The update history reveals the kernel was updated, amongst many things; and the following were installed: linux-image-3.5.0-19-generic (3.5.0-19.30) linux-image-extra-3.5.0-19-generic (3.5.0-19.30) I've encountered this type of problem quite recently, so I decided to reapply the same steps, to solve the problem, as follows: sudo apt-get install linux-headers-3.5.0-19 sudo apt-get install linux-headers-3.5.0-19-generic sudo depmod -a sudo modprobe nvidia sudo /etc/init.d/*dm restart When installing linux-headers-3.5.0-19-generic, I get an error, message from terminal as follows: Setting up linux-headers-3.5.0-19-generic (3.5.0-19.30) ... Examining /etc/kernel/header_postinst.d. run-parts: executing /etc/kernel/header_postinst.d/dkms 3.5.0-19-generic /boot/vmlinuz-3.5.0-19-generic Error! Problems with depmod detected. Automatically uninstalling this module. DKMS: Install Failed (depmod problems). Module rolled back to built state. However, I ignored the above error and continued the steps with sudo depmod -a, installed nvidia-current, then did sudo modprobe nvidia, which yielded the following error: FATAL: Error inserting nvidia_current (/lib/modules/3.5.0-19-generic/updates/dkms/nvidia_current.ko): No such device Upon restart, the Nvidia driver now works! BTW, do those error messages imply I broke something? Just curious, cause I don't want to get happy I've fixed it, then it stops working later on. The system is Dell XPS-L702X, with NVIDIA GeForce GT 555M, and 17" screen.

  Read the article

• Trying to recover deleted Ubuntu partition

  - by user110984

  I made a mistake in logging into my 200 GB Ubuntu partition. I could not access Grub after that. Using a live CD I then ran Boot_Repair and apparently deleted the partition, I guess because I ran it from my 70 GB Windows partition. I can send the results of boot_info before that and of Boot_Repair. Then I ran TestDisk, which apparently found only dev/sda/ -320GB / 298 / GiB - WDC - WD3200BEVT-22A23T0 (Was there any more I could have done with TestDisk? I looked at the TestDisk_Step_By_Step example and found no way forward given that no other partitions turned up) I have run gpart and found this: /sda1 - 15 GB /sda2 - system reserved /sda3 - 70.15 GB /sda4 - extended 212.84 unallocated - 209.10 /sda5 - unknown 3.74 . I have been told I can recover the partition using gparted's Rescue start end command, but I don't know what to enter for start and end. [--EDIT: TestDisk Deeper Search stated that "the following partitions can't be recovered" and listed a 220-GB Linux partition 6 times. Then it stated that "The current number of heads per cylinder is 255 but the correct value may be 128" and I could try to change it in the Geometry menu (because apparently these are overlapping partitions) So should I do that?--]

  Read the article

• Can I install new version of Ubuntu in spair RAIDed partition with unetbootin

  - by artfulrobot

  I have Ubuntu 11.04 running on my home desktop which has 2 hard drives mirrored by RAID. The drives are partitioned with a big data partition, a swap partition and a couple of 20Gb partitions for OSes, one is 11.04 which is in use, and the other is kept spare for installing a later version. Which is what I'd like to do now. The idea of a 2nd partition for new OS is that I can try it, and if it's problematic, I can boot back into the original one - the machine is shared with others, so I need it to stay available! I have had horrible problems with software RAID after using a Live USB stick - basically it messes up the internal numbering of the RAID drives or something, anyway, the result is you can't boot after using it :-( and have to spend ages re-assembling the arrays, trying to remember grub commands etc etc. Quite a shocker when you consider booting from a Live USB is supposed not to affect the existing system. As I'm installing in a RAIDed disc, I would typically use the Alternative install (sad to hear that this is going to be dropped in future). However, I think I might be able to use unetbootin to trick the system into working on top of the existing system that understands RAID, with the normal ISO? If unetbootin loads from drives that are already understood to be RAIDED, then presumably it will only see md0... instead of sda, sdb... and as long as I don't need to repartition (I don't) it should be fine, right? Or is that just plain foolishness? Please tell me before I end up with a dead system (again!)

  Read the article

• PHP safe_mode is a pain, looking for advice (Ubuntu 12.04 server, public webserver)

  - by user73279

  Maybe askUbuntu isn't the right forum or I haven't provided the right search query but I haven't seen anything in my searching of askUbuntu on PHP safe_mode. I get lots of Windows Safe Mode and Ubuntu Safe Mode results but not PHP safe_mode. So I keep running into one issue after another regarding PHP safe_mode. (I write a lot of my own PHP code for various site maintenance tools and such.) I know safe_mode is going away in the next version of PHP but I still see a fair amount of advice recommending that you leave it enabled. I've recently consolidated from 3 servers down to 1 and at least one of those old servers had safe_mode disabled without any issues. (The lack of issues may have simply been a matter of good luck.) None of the previous 3 gave me this much trouble so I'm guessing so additional php.ini/PHP safe_mode setting was turned on for the new server. I primarily run WordPress for my websites with a few MediaWiki sites sprinkled in. And I am currently running into an issue using WordPress's auto update feature as it doesn't seem to be able to use fopen. WordPress is not relaying the actual error message to me but since I was just able to update the plugins I'm using this is a safe_mode problem. I've had a lot of safe_mode issues since consolidating to this new server. Long story short, the advice I'd seen to use safe_mode was all at least 2 years old. Do I really need it? If I disable PHP safe_mode are there a good set of security measures I should implement - i.e. chmod 640 /var/www/..., add this to your .htaccess, etc - to protect my server/sites? Thanks

  Read the article

• Windows Server 2008 R2 - 180 day evaluation vs. 10 days + 5 re-arms

  - by Rob

  The content on the Server 2008 R2 Trial Software page states that it can be evaluated for upto 180 days, however on a test machine we installed last week, it's requesting "re-arming" every 10 days, which seems to be do-able a maximum of 5 times? How do we get it to last more than 50 days, as it'd be a pain to have to rebuild the server concerned!

  Read the article

• Trouble WIth Immediate Shutdown in Ubuntu 13.10 with Cinnamon

  - by Sneha429

  Just installed Ubuntu on my family's computer. I thought the Cinnamon desktop environment would be better for my parents who have only ever used Windows. Everything works great until I try to shut down. Shutting down while in Cinnamon desktop brings up a prompt window that says it will shutdown in 60 seconds and gives the option to either suspend or cancel. The suspend button does not suspend the computer. Allowing the timer to countdown merely logs the current user out. Under power management, I have selected Shutdown Immediately for Power button action. I still get the same prompt. I have tried toggling between the other options, but regardless of what option is selected, the shutdown button always brings up the suspend or cancel prompt with no way to shutdown immediately. I would prefer not to use the power button for this as it is partially concealed with the computer desk. The fastest way to shutdown is to log out (which says it will log out in 60 seconds but also has log out and cancel buttons, so I can immediately log out) and then shutdown. I would prefer to have it automatically shut down. Any and all suggestions are appreciated. Thank you!

  Read the article

• Ubuntu 12.10 with kernel 3.5.0-18

  - by Chaitanya

  I had ubuntu 12.04 with kernel 3.0.2. Today I have updated my system and got 12.10 with kernel 3.5.0-18. Now when I boot my machine with 3.5 kernel, it starts until the page where I enter my password. Within seconds, I get a page with looooong list of some commands or list. I cant take screenshot of that. It looks something like, [1.2234978942837]kjsahfa;lsfksld;fkjsf;owieurwirejw/rnw;erkjwelrjw2309480432 [1.3294823498230948]as;lfjsf;iuwrijrwjlkerjw;rekwer;lkwjre;lkjRIJWEORIWE'JJA; something like this. Luckily, in my boot page, I have 3.0.2 kernel also. When I boot with 3.0.2 kernel there is no problem. But when I boot with 3.5.0, it throws that wierd error. I wont be able to do anything at that time. None of the keys work. I have to forcibly shutdown the machine and restart with 3.0.2 kernel. Please help..... Thanks, Chaitanya.

  Read the article

• Help setting up wireless in Ubuntu 13.04

  - by James

  I'm having problems connecting my WIFI in Ubuntu 13.04 . So I was wondering if filling in the data manually ie: the IPv4, IPv6, the SSID and BSSID info etc. I did try this before but maybe I put in the wrong data or maybe not enough. Would that make it work? I just don't know how to find out some of the data you need to put in? I'm new and it's confusing. Does anyone know the solution? Here is lspci: james@james-MM061:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01) 00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 01) 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 01) 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01) 03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) 0b:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) Computer information: Model: Dell MM061 Mobile Intel(R) 945GM Express Chipset Family [Display adapter] (2x)

  Read the article

• Unity calendar lens not showing events in Ubuntu 12.04

  - by David_G

  I'm trying to get proper/useful calendar integration into Ubuntu 12.04. I have a Google Calendar (& account) and I want to be able to use this without opening the browser. I want to get the Unity Calendar lens working, so that it shows events coming up, and it allows me a quick way to add new events. However, after installing it, it does not find any events, nor allow me to add a new event. Note that I've installed Lightning 1.4, Evolution mirror 0.2.3, Evolution, and unity-calendar lens. I've also installed Calendar-indicator. I suspect that somehow the lens is not getting the calendar information from thunderbird via evolution. A bit of searching around led me to try this command: /usr/lib/calendar-lens/calendar-lens-daemon.py. With this result: /usr/lib/python2.7/dist-packages/gobject/constants.py:24: Warning: g_boxed_type_register_static: assertion `g_type_from_name (name) == 0' failed import gobject._gobject Traceback (most recent call last): File "/usr/lib/calendar-lens/calendar-lens-daemon.py", line 324, in daemon = Daemon() File "/usr/lib/calendar-lens/calendar-lens-daemon.py", line 80, in init for calendar in evolution.ecal.list_calendars(): AttributeError: 'NoneType' object has no attribute 'list_calendars' Any ideas?

  Read the article

• Bluetooth not working on Acer 3820tg (Ubuntu 12.04)

  - by Iohannes

  After upgrading to 12.04 (it was done by a complete reinstallation), bluetooth doesn't work anymore. Before (I think it was Ubuntu 11.04), I just followed instructions on this page and copied /lib/firmware/ath3k-2.fw to /lib/firmware/ath3k-1.fw and everything was fine. But in 12.04, there isn't any ath3k-2.fw in the /lib directory, so this method is not possible. Also, pressing Fn+F3 doesn't work. I would appreciate any help. Some further information (I hope it's enough): dmesg [ 23.063710] Bluetooth: Core ver 2.16 [ 23.063740] NET: Registered protocol family 31 [ 23.063743] Bluetooth: HCI device and connection manager initialized [ 23.063746] Bluetooth: HCI socket layer initialized [ 23.063747] Bluetooth: L2CAP socket layer initialized [ 23.063972] Bluetooth: SCO socket layer initialized [ 23.066930] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 23.066934] Bluetooth: BNEP filters: protocol multicast [ 23.068422] Bluetooth: RFCOMM TTY layer initialized [ 23.068428] Bluetooth: RFCOMM socket layer initialized [ 23.068430] Bluetooth: RFCOMM ver 1.11 lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 003: ID 046d:c05f Logitech, Inc. Bus 002 Device 004: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business Bus 002 Device 005: ID 0402:9665 ALi Corp. Gateway Webcam hcitool dev Devices:

  Read the article

• Impossible to enable bluetooth under Ubuntu

  - by PCh

  I just installed Ubuntu 12.04 (dual boot, kept Windows just in case) on my new Acer Aspire One 756-877. As soon as I installed it I also installed the Broadcom driver, since wifi wasn't working, and that solved it right away. But when I tried Bluetooth, I had a problem that I see is quite recurring: -The hardware is on (and working fine under Windows) -The icon shows up on the menu, giving me the options of turning Bluetooth on or off, and then just "Bluetooth preferences". -I can apparently turn it on that way, which only lights up the icon but makes no difference at all (and doesn't give any other options in the Bluetooth menu) -When I open "Bluetooth preferences" (whether Bluetooth is apparently on or off, it makes no difference), it says it's disabled and will not let me slide the button to enable it. I've rebooted, but nothing happens. -The material is Broadcom and the port (if it's relevant at all) is Port_#0001.Hub_#0003 I tried the following commands suggested in other similar questions, with no result at all: sudo dmesg | grep blue and sudo service bluetooth start and sudo /etc/init.d/bluetooth start Any other clues on what I can do? Thanks for your time!

  Read the article

• How do install Ubuntu from a USB stick?

  - by Sophia

  When I go to the boot menu on my computer and select USB stick, the screen goes black and there comes a flickering underline. Like I could write something. But I can't. Whatever I push, nothing happens. Except the PrintScrn/SysRq button. When I push it, mu computer beeps. I get no choose menu. Nothing. I found out the usb stick is in msdos format. So what format should I use and how can I format it? I am not a computer geek who knows everything. I'm just a beginner. And only 16 years old. I've got a new problem. The screen isn't black anymore. Now there comes an error message: SYSLINUX 4.04 CHS 20110518 Copyright (C) 1994-2011 H.Peter Anvin et al ERROR:No configurationfile found No DEFAULT or UI configuration directive found! boot: And when I write something: boot:example Could not find kernel image:example boot: Why does this fail all the time? ps. I'm using Ubuntu Oneiric 11.10.

  Read the article

• Good Email Tagging Plugin for Thunderbird 10.0.2?

  - by leeand00

  I like to tag my emails in Mozilla Thunderbird 10.0.2, but the tagging system that is built in just isn't sufficient, I want to use something a little closer to the suggest tag system that is built into Stackexchange, where existing tags will display as I type them, and they will be separated using some sort of delimiter (such as a space or a comma). Does anyone know of any mail tagging plugins like that?

  Read the article

• Outlook 2007 - Easiest and most inexpensive way to share a calendar between 5-10 people?

  - by JoshuaD

  What's the easiest way to share a calendar in outlook 2007 between 5-10 people on a local network? I have tried sharepoint and the password prompts are too much of a pain. Security is not an issue; ease and functionality are the priorities.

  Read the article

• Ubuntu crashes with menu bar launcher freeze during software centre use

  - by UbunUser

  I recently reinstalled Ubuntu 12.04 LTS on a Dell Studio 1588 64-bit and ran into crashes as I was installing some software on the software centre. Before this, I had display/screen problems that I needed to fix so I will briefly describe that in case it has any connection to the crashes. The problem was of screen crash/flickering (related to ATI Mobility Radeon HD 5400x) when trying to adjust brightness and so I followed guidance from an earlier chain (question 131967) to (a) use jockey to install fglrx update driver (deactivate experimental beta driver) and (b) edit grub to add acpi_backlight=vendor dell_laptop.backlight=0 The crashes that happened (twice, while software centre was just finishing installation in the background) was that all tabs (on open Firefox window) stayed open along with cursor control with mousepad but all menu bars disappeared completely along with the launcher and the keyboard also turned unresponsive. So there seemed to be no way to close windows or shut down the computer except for a forced hard shut down of the system using the start button. This is very similar to Questions #167540 and #298843, which seem to be closed. Why is this happening? Is there some update or fix I need to make? Thanks!

  Read the article

• running adb via wifi on ubuntu 13.04

  - by Blaze Tama

  First, im new on linux so please bear with me. I have a rooted android phone and i was able to run the adb via wifi network on windows, where i just need to go to the adb's directory and type adb connect. However, i can't just do that in my ubuntu. Everytime i enter adb connect, the terminal always said that i dont have the adb and i must install it. When i check the ADT Bundle (I downloaded the bundled one from here), i can see the adb is there inside the platform-tools folder. I already tried to change the directory to the platform-tools and run the adb connect from there, but its still not working. Do i need to install the adb again via terminal? Or did i miss something? You may be wondering why dont i just download the adb (again) via terminal and do trial and error? The answer is because i dont have a good internet connection, so i want to avoid unnecessary downloads. Thanks for your time :D

  Read the article

• Restart and/or graphics problem in Ubuntu 12.04

  - by kara

  I having been using 12.04 for a couple of months now, with v. little problems. The other day I restarted my computer, and though I think it rebooted, the screen would be black. I could not even get a visual from a live cd. Finally, I was able to get it to load, but the resolution has been completely off. The computer thinks I have a laptop screen, when I actually have a ViewSonic VP2330wb, and it detects only two resolutions. And still, I have a problem with rebooting. If the screen locks after I leave it for a while, I can't get a visual back, and then when I force a shutdown, it takes 3 times for me to get a grub screen. Then I have to boot in recovery mode, and then finally in normal mode, but the screen is still always off. This is my video card: description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list configuration: latency=0 resources: memory:fe000000-fe3fffff memory:d0000000-dfffffff ioport:f000(size=64) I am a new ubuntu user, and am at my wits end. Any help would be greatly appreciated.

  Read the article

• Ubuntu 64bit Black Screen on Minecraft

  - by Signify

  I have tried posting on the forums, but I really need help (I'm a server admin and really don't want to have to switch to Windows just to run Minecraft). Anyhow, I originally was running openjdk6 as I was told that 7 was unstable and was getting periodical lag spikes while walking (at least once every 3 seconds the screen would freeze for a tenth of a second). After that, I attempted to install Sun's Java JDK7 (I couldn't get ahold of 6 without signing up for Oracle's newsletters). Upon attempting to run Minecraft, I got a black screen after logging in with this error message: 27 achievements 182 recipes Setting user: Thunder7102, -1618112820878091307 Exception in thread "Minecraft main thread" java.lang.UnsatisfiedLinkError: /home/noiro/.minecraft/bin/natives/liblwjgl.so: /home/noiro/.minecraft/bin/natives/liblwjgl.so: wrong ELF class: ELFCLASS32 (Possible cause: architecture word width mismatch) at java.lang.ClassLoader$NativeLibrary.load(Native Method) at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1939) at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1864) at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1825) at java.lang.Runtime.load0(Runtime.java:792) at java.lang.System.load(System.java:1059) at org.lwjgl.Sys$1.run(Sys.java:69) at java.security.AccessController.doPrivileged(Native Method) at org.lwjgl.Sys.doLoadLibrary(Sys.java:65) at org.lwjgl.Sys.loadLibrary(Sys.java:81) at org.lwjgl.Sys.<clinit>(Sys.java:98) at org.lwjgl.opengl.Display.<clinit>(Display.java:132) at net.minecraft.client.Minecraft.a(SourceFile:184) at net.minecraft.client.Minecraft.run(SourceFile:657) at java.lang.Thread.run(Thread.java:722) Now, this got me fed up, so I tried to install a Windows 7 virtual machine through virtualbox, I gave it 256mb of graphics memory with 2D and 3D acceleration and 3GB of RAM. I installed Java JDK7 for Windows (which does work from experience on my other Windows 7 partition). Once again, a black screen after login. What the heck is going on guys? My System Specs: Ubuntu 12.04 64bit Fully Updated running Gnome3 Nvidia GTS 450 1.3GB OC'd AMD Athlon II 4x 2.8Ghz 6GB of RAM So, what do you think?

  Read the article

• Latest update to Ubuntu 13.10 broke Intel graphics drivers

  - by James Davies

  I'm running a copy of Ubuntu 13.10 on an i7-4771 w/ Intel HD4600 Graphics using a Dell Ultrasharp 1440p monitor via Displayport. Up until today this configuration has been working perfectly, however the latest update appears to have broken my graphics configuration, and xorg is now refusing to go above 1280p resolution. Running xrandr it appears the driver incorrectly thinks my monitor is plugged into the HDMI port and is detecting a max resolution of 1920x1200 instead of 2560x1440. (It's actually plugged in via Displayport). Based on the apt history.log, the latest update was for the kernel. I'm presuming the issue is that the official Intel driver hasn't been updated to support this version? Is there any way to resolve this, or will I need to upgrade to 14.10 to get the latest driver from Intel? Start-Date: 2014-05-28 11:30:57 Commandline: aptdaemon role='role-commit-packages' sender=':1.473' Install: linux-image-extra-3.11.0-22-generic:amd64 (3.11.0-22.38), linux-image-3.11.0-22-generic:amd64 (3.11.0-22.38), linux-headers-3.11.0-22:amd64 (3.11.0-22.38), linux-headers-3.11.0-22-generic:amd64 (3.11.0-22.38)

  Read the article

• Wrong resolution for Lightdm/GDM on Ubuntu 13.04 using HDMI

  - by f03lipe

  I've tried all the solution I could find on the matter so far, but the error persists. My problem is that the login screen (both under gdm and lightdm) runs with the wrong resolution, even though all is fine when I log in. The error occurs solely when I have my HDMI cable connected to my other screen. The login screen resolution becomes 1024x768 (for my 1366x768 laptop screen) and mirrored on my screen, which is 1920x1080. I've had this issue on version 12.04 (the last one before I upgraded to 13.04), but I got it fixed by adding the xrandr commands on the begining of the /etc/gdm/Init/Default file. This doesn't seem to work anymore. I've also tried telling lightdm to run a script fixing the resolution with xrandr (by editing /etc/lightdm/lightdm.conf), but lightdm crashes, and I'm forced to log in with low graphic settigs. Hint: when ubuntu is loading, the resolution starts OK, then goes bad right before the login screen is initialized. Does that mean that there's nothing wrong with my graphic cards? What do you think? Cheers!

  Read the article

< Previous Page | 364 365 366 367 368 369 370 371 372 373 374 375  | Next Page >