Search Results

Search found 12089 results on 484 pages for 'rule of three'.

Page 369/484 | < Previous Page | 365 366 367 368 369 370 371 372 373 374 375 376  | Next Page >

• pfsense peer-to-peer OpenVPN not connecting

  - by John P

  I'm trying to setup a peer-to-peer OpenVPN between two pfsense servers running 2.0.1-RELEASE, but the client keeps getting the connection dropped, with a status of "reconnecting; ping-restart" and nothing appears to be routing between them. Both these firewalls are also doing PPTP VPNs that are working correctly. FW01 ("server") ======================= LAN: 10.1.1.2/24 WAN: xx.xx.126.34/27 ServerMode: Peer to Peer (Shared Key) Protocol: UDP DeviceMode: tun Interface: WAN Port 1194 Tunnel: 10.0.8.1/30 Local Network: 10.1.1.0/24 Remote Network: 192.168.1.0/24 Firewall Rule in OpenVPN tab: UDP * * * * * none FW03 (client) LAN: 192.168.1.2/24 WAN: xx.xx.9.66/27 ServerMode: Peer to Peer (Shared Key) Protocol: UDP DeviceMode: tun Interface: WAN Server Host: xx.xx.126.34 Tunnel: -- also tried 10.1.8.0/24 Remote Network: 10.1.1.0/24 Client Logs: System Log Apr 6 18:00:08 kernel: ... Restarting packages. Apr 6 18:00:13 check_reload_status: Starting packages Apr 6 18:00:19 php: : Restarting/Starting all packages. Apr 6 18:00:56 kernel: ovpnc1: link state changed to DOWN Apr 6 18:00:56 check_reload_status: Reloading filter Apr 6 18:00:57 check_reload_status: Reloading filter Apr 6 18:00:57 kernel: ovpnc1: link state changed to UP Apr 6 18:00:57 check_reload_status: rc.newwanip starting ovpnc1 Apr 6 18:00:57 check_reload_status: Syncing firewall Apr 6 18:01:02 php: : rc.newwanip: Informational is starting ovpnc1. Apr 6 18:01:02 php: : rc.newwanip: on (IP address: ) (interface: ) (real interface: ovpnc1). Apr 6 18:01:02 php: : rc.newwanip: Failed to update IP, restarting... Apr 6 18:01:02 php: : send_event: sent interface reconfigure got ERROR: incomplete command. all reload reconfigure restart newip linkup sync Client OpenVPN log Apr 6 18:39:14 openvpn[12177]: Inactivity timeout (--ping-restart), restarting Apr 6 18:39:14 openvpn[12177]: SIGUSR1[soft,ping-restart] received, process restarting Apr 6 18:39:16 openvpn[12177]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Apr 6 18:39:16 openvpn[12177]: Re-using pre-shared static key Apr 6 18:39:16 openvpn[12177]: Preserving previous TUN/TAP instance: ovpnc1 Apr 6 18:39:16 openvpn[12177]: UDPv4 link local (bound): [AF_INET]64.94.9.66 Apr 6 18:39:16 openvpn[12177]: UDPv4 link remote: [AF_INET]64.74.126.34:1194 Server OpenVPN log Apr 6 14:40:36 openvpn[22117]: UDPv4 link remote: [undef] Apr 6 14:40:36 openvpn[22117]: UDPv4 link local (bound): [AF_INET]xx.xx.126.34:1194 Apr 6 14:40:36 openvpn[21006]: /usr/local/sbin/ovpn-linkup ovpns1 1500 1557 10.1.8.1 10.1.8.2 init Apr 6 14:40:36 openvpn[21006]: /sbin/ifconfig ovpns1 10.1.8.1 10.1.8.2 mtu 1500 netmask 255.255.255.255 up Apr 6 14:40:36 openvpn[21006]: do_ifconfig, tt-ipv6=0, tt-did_ifconfig_ipv6_setup=0 Apr 6 14:40:36 openvpn[21006]: TUN/TAP device /dev/tun1 opened Apr 6 14:40:36 openvpn[21006]: Control Channel Authentication: using '/var/etc/openvpn/server1.tls-auth' as a OpenVPN static key file Apr 6 14:40:36 openvpn[21006]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Apr 6 14:40:36 openvpn[21006]: OpenVPN 2.2.0 amd64-portbld-freebsd8.1 [SSL] [LZO2] [eurephia] [MH] [PF_INET6] [IPv6 payload 20110424-2 (2.2RC2)] built on Aug 11 2011 Apr 6 14:40:36 openvpn[17171]: SIGTERM[hard,] received, process exiting Apr 6 14:40:36 openvpn[17171]: /usr/local/sbin/ovpn-linkdown ovpns1 1500 1557 10.1.8.1 10.1.8.2 init Apr 6 14:40:36 openvpn[17171]: ERROR: FreeBSD route delete command failed: external program exited with error status: 1 Apr 6 14:40:36 openvpn[17171]: event_wait : Interrupted system call (code=4) Apr 6 14:06:32 openvpn[17171]: Initialization Sequence Completed Apr 6 14:06:32 openvpn[17171]: UDPv4 link remote: [undef] Apr 6 14:06:32 openvpn[17171]: UDPv4 link local (bound): [AF_INET]xx.xx.126.34:1194

  Read the article

• SQL Server Licensing in a VMware vSphere Cluster

  - by Helvick

  If I have SQL Server 2008 instances running in virtual machines on a VMware vSphere cluster with vMotion\DRS enabled so that the VM's can (potentially) run on any one of the physical servers in the cluster what precisely are the license requirements? For example assume that I have 4 physical ESX Hosts with dual physical CPU's and 3 separate single vCPU Virtual Machines running SQL Server 2008 running in that cluster. How many SQL Standard Processor licenses would I need? Is it 3 (one per VM) or 12 (one per VM on each physical host) or something else? How many SQL Enterprise Processor licenses would I need? Is it 3 (one per VM) or 8 (one for each physical CPU in the cluster) or, again, something else? The range in the list prices for these options goes from $17k to $200k so getting it right is quite important. Bonus question: If I choose the Server+CAL licensing model do I need to buy multiple Server instance licenses for each of the ESX hosts (so 12 copies of the SQL Server Standard server license so that there are enough licenses on each host to run all VM's) or again can I just license the VM and what difference would using Enterprise per server licensing make? Edited to Add Having spent some time reading the SQL 2008 Licensing Guide (63 Pages! Includes Maps!*) I've come across this: • Under the Server/CAL model, you may run unlimited instances of SQL Server 2008 Enterprise within the server farm, and move those instances freely, as long as those instances are not running on more servers than the number of licenses assigned to the server farm. • Under the Per Processor model, you effectively count the greatest number of physical processors that may support running instances of SQL Server 2008 Enterprise at any one time across the server farm and assign that number of Processor licenses And earlier: ..For SQL Server, these rule changes apply to SQL Server 2008 Enterprise only. By my reading this means that for my 3 VM's I only need 3 SQL 2008 Enterprise Processor Licenses or one copy of Server Enterprise + CALs for the cluster. By implication it means that I have to license all processors if I choose SQL 2008 Standard Processor licensing or that I have to buy a copy of SQL Server 2008 Standard for each ESX host if I choose to use CALs. *There is a map to demonstrate that a Server Farm cannot extend across an area broader than 3 timezones unless it's in the European Free Trade Area, I wasn't expecting that when I started reading it.

  Read the article

• Lion built-in VPN client times out connecting to Windows 2003 PPTP server

  - by beporter

  I have a new iMac with OS X 10.7 (Lion) on it that refuses to connect to a PPTP-based VPN server (running Windows 2003 SBS). To shortcut past a lot of questions: There is a Dell workstation running Windows 7 on the same LAN as the Mac that is able to establish a PPTP connection to the same VPN server using the same credentials. That would seem to rule out any possible problems with the server, the port forwards on the server's firewall, the internet connection between the two, and the router local to the Dell and iMac. Here's a "verbose" dump of the PPP log from the iMac: Tue Sep 6 10:13:11 2011 : using link 0 Tue Sep 6 10:13:11 2011 : Using interface ppp0 Tue Sep 6 10:13:11 2011 : Connect: ppp0 socket[34:17] Tue Sep 6 10:13:11 2011 : sent [LCP ConfReq id=0x1 ] Tue Sep 6 10:13:11 2011 : PPTP port-mapping for en0, interfaceIndex: 0, Protocol: None, Private Port: 0, Public Address: 45f6f181, Public Port: 0, TTL: 0. Tue Sep 6 10:13:11 2011 : PPTP port-mapping for en0 inconsistent. is Connected: 1, Previous interface: 4, Current interface 0 Tue Sep 6 10:13:11 2011 : PPTP port-mapping for en0 initialized. is Connected: 1, Previous publicAddress: (0), Current publicAddress 45f6f181 Tue Sep 6 10:13:11 2011 : PPTP port-mapping for en0 fully initialized. Flagging up Tue Sep 6 10:13:14 2011 : sent [LCP ConfReq id=0x1 ] Tue Sep 6 10:13:17 2011 : sent [LCP ConfReq id=0x1 ] Tue Sep 6 10:13:20 2011 : sent [LCP ConfReq id=0x1 ] Tue Sep 6 10:13:23 2011 : sent [LCP ConfReq id=0x1 ] Tue Sep 6 10:13:26 2011 : sent [LCP ConfReq id=0x1 ] Tue Sep 6 10:13:29 2011 : sent [LCP ConfReq id=0x1 ] Tue Sep 6 10:13:32 2011 : sent [LCP ConfReq id=0x1 ] Tue Sep 6 10:13:35 2011 : sent [LCP ConfReq id=0x1 ] Tue Sep 6 10:13:38 2011 : sent [LCP ConfReq id=0x1 ] Tue Sep 6 10:13:41 2011 : LCP: timeout sending Config-Requests Tue Sep 6 10:13:41 2011 : Connection terminated. Tue Sep 6 10:13:41 2011 : PPTP disconnecting... Tue Sep 6 10:13:41 2011 : PPTP clearing port-mapping for en0 Tue Sep 6 10:13:41 2011 : PPTP disconnected The error seems to be focused around the line, LCP: timeout sending Config-Requests, but I haven't had any luck in finding troubleshooting information for this. I've tried completely deleting the entire VPN "connection" from the Network prefpane and recreating it from scratch. I am certain the connection details are correct because they exactly match what successfully connects from the Win7 machine sitting next to the iMac. Any suggestions?

  Read the article

• VPN iptables Forwarding: Net-to-net

  - by Mike Holler

  I've tried to look elsewhere on this site but I couldn't find anything matching this problem. Right now I have an ipsec tunnel open between our local network and a remote network. Currently, the local box running Openswan ipsec with the tunnel open can ping the remote ipsec box and any of the other computers in the remote network. When logged into on of the remote computers, I can ping any box in our local network. That's what works, this is what doesn't: I can't ping any of the remote computers via a local machine that is not the ipsec box. Here's a diagram of our network: [local ipsec box] ----------\ \ [arbitrary local computer] --[local gateway/router] -- [internet] -- [remote ipsec box] -- [arbitrary remote computer] The local ipsec box and the arbitrary local computer have no direct contact, instead they communicate through the gateway/router. The router has been set up to forward requests from local computers for the remote subnet to the ipsec box. This works. The problem is the ipsec box doesn't forward anything. Whenever an arbitrary local computer pings something on the remote subnet, this is the response: [user@localhost ~]# ping 172.16.53.12 PING 172.16.53.12 (172.16.53.12) 56(84) bytes of data. From 10.31.14.16 icmp_seq=1 Destination Host Prohibited From 10.31.14.16 icmp_seq=2 Destination Host Prohibited From 10.31.14.16 icmp_seq=3 Destination Host Prohibited Here's the traceroute: [root@localhost ~]# traceroute 172.16.53.12 traceroute to 172.16.53.12 (172.16.53.12), 30 hops max, 60 byte packets 1 router.address.net (10.31.14.1) 0.374 ms 0.566 ms 0.651 ms 2 10.31.14.16 (10.31.14.16) 2.068 ms 2.081 ms 2.100 ms 3 10.31.14.16 (10.31.14.16) 2.132 ms !X 2.272 ms !X 2.312 ms !X That's the IP for our ipsec box it's reaching, but it's not being forwarded. On the IPSec box I have enabled IP Forwarding in /etc/sysctl.conf net.ipv4.ip_forward = 1 And I have tried to set up IPTables to forward: *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [759:71213] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 25 -j ACCEPT -A INPUT -p udp -m state --state NEW -m udp --dport 500 -j ACCEPT -A INPUT -p udp -m state --state NEW -m udp --dport 4500 -j ACCEPT -A INPUT -m policy --dir in --pol ipsec -j ACCEPT -A INPUT -p esp -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -s 10.31.14.0/24 -d 172.16.53.0/24 -j ACCEPT -A FORWARD -m policy --dir in --pol ipsec -j ACCEPT -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT Am I missing a rule in IPTables? Is there something I forgot? NOTE: All the machines are running CentOS 6.x Edit: Note 2: eth1 is the only network interface on the local ipsec box.

  Read the article

• My current iptable configuration doesn't work [on hold]

  - by Brad

  sudo chkconfig iptables off /etc/init.d/iptables on ### Clear/flush iptables sudo iptables -F sudo iptables -P INPUT ACCEPT sudo iptables -P OUTPUT ACCEPT sudo iptables -P FORWARD ACCEPT ### Allow SSH iptables -A INPUT -i eth0 -p tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 22 -m state --state ESTABLISHED -j ACCEPT ### Allow YUM updates sudo iptables -A OUTPUT -o eth0 -p tcp --dport 80 --match owner --uid-owner 0 --state NEW,ESTABLISHED -j ACCEPT sudo iptables -A OUTPUT -o eth0 -p tcp --dport 443 --match owner --uid-owner 0 --state NEW,ESTABLISHED -j ACCEPT ### Add your rules form the link above, here # ftp,smtp,imap,http,https,pop3,imaps,pop3s sudo iptables -A INPUT -i eth0 -p tcp -m multiport --dports 21,25,143,80,443,110,993,995 -m state --state NEW,ESTABLISHED -j ACCEPT sudo iptables -A OUTPUT -o eth0 -p tcp -m multiport --sports 21,25,143,80,110,443,993,995 -m state --state NEW,ESTABLISHED -j ACCEPT ## allow dns sudo iptables -A OUTPUT -p udp -o eth0 --dport 53 -j ACCEPT && sudo iptables -A INPUT -p udp -i eth0 --sport 53 -j ACCEPT # handling pings sudo iptables -A INPUT -p icmp --icmp-type echo-request -j ACCEPT && sudo iptables -A OUTPUT -p icmp --icmp-type echo-reply -j ACCEPT sudo iptables -A OUTPUT -p icmp --icmp-type echo-request -j ACCEPT && sudo iptables -A INPUT -p icmp --icmp-type echo-reply -j ACCEPT # manage ddos attacks sudo iptables -A INPUT -p tcp --dport 80 -m limit --limit 25/minute --limit-burst 100 -j ACCEPT ## Implement some logging so that we know what's getting dropped sudo iptables -N LOGGING sudo iptables -A INPUT -j LOGGING sudo iptables -A LOGGING -m limit --limit 2/min -j LOG --log-prefix "IPTables Packet Dropped: " --log-level 7 sudo iptables -A LOGGING -j DROP # once a rule affects traffic then it is no longer managed # so if the traffic has not been accepted, block it sudo iptables -A INPUT -j DROP sudo iptables -I INPUT 1 -i lo -j ACCEPT sudo iptables -A OUTPUT -j DROP # allow only internal port forwarding sudo iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT sudo iptables -P FORWARD DROP # create an iptables config file sudo iptables-save > /root/dsl.fw ### Append the following to the rc.local file sudo nano /etc/rc.local ####--- /sbin/iptables-restore < sudo /root/dsl.fw ####--- /etc/init.d/iptables save ## check to see if this setting is working great. sudo service iptables restart ## log out/in testing sudo chkconfig iptables on What is the problem with this setup? If I restart the server it doesn't allow me back in SSH, and there may be a problem with Yum Original source of information: https://gist.github.com/Jonathonbyrd/1274837#file-instructions

  Read the article

• Apache2 - mod_expire and mod_rewrite not working in httpd.conf - serving content from tomcat

  - by Ankit Agrawal

  Hi, I am using apache2 server running on debian which forwards all the http request to tomcat installed on same machine. I have two files under my /etc/apache2/ folder apache2.conf and httpd.conf I modified httpd.conf file to look like following. # forward all http request on port 80 to tomcat ProxyPass / ajp://127.0.0.1:8009/ ProxyPassReverse / ajp://127.0.0.1:8009/ # gzip text content AddOutputFilterByType DEFLATE text/plain AddOutputFilterByType DEFLATE text/html AddOutputFilterByType DEFLATE text/xml AddOutputFilterByType DEFLATE text/css AddOutputFilterByType DEFLATE text/javascript AddOutputFilterByType DEFLATE application/xml AddOutputFilterByType DEFLATE application/xhtml+xml AddOutputFilterByType DEFLATE application/rss+xml AddOutputFilterByType DEFLATE application/javascript AddOutputFilterByType DEFLATE application/x-javascript DeflateCompressionLevel 9 BrowserMatch ^Mozilla/4 gzip-only-text/html BrowserMatch ^Mozilla/4\.0[678] no-gzip BrowserMatch \bMSIE !no-gzip !gzip-only-text/html # Turn on Expires and mark all static content to expire in a week # unset last modified and ETag ExpiresActive On ExpiresDefault A0 <FilesMatch "\.(jpg|jpeg|png|gif|js|css|ico)$" ExpiresDefault A604800 Header unset Last-Modified Header unset ETag FileETag None Header append Cache-Control "max-age=604800, public" </FilesMatch RewriteEngine On # rewrite all www.example.com/content/XXX-01.js and YYY-01.css files to XXX.js and YYY.css RewriteRule ^content/(js|css)/([a-z]+)-([0-9]+)\.(js|css)$ /content/$1/$2.$4 # remove all query parameters from URL after we are done with it RewriteCond %{THE_REQUEST} ^GET\ /.*\;.*\ HTTP/ RewriteCond %{QUERY_STRING} !^$ RewriteRule .* http://example.com%{REQUEST_URI}? [R=301,L] # rewrite all www.example.com to example.com RewriteCond %{HTTP_HOST} ^www\.example\.com$ [NC] RewriteRule ^(.*)$ http://example.com/$1 [R=301,L] I want to achieve following. forward all traffic to tomcat GZIP all the text content. Put 1 week expiry header to all static files and unset ETag/last modified header. rewrite all js and css file to certain format. remove all the query parameters from URL forward all www.example.com to example.com The problem is only 1 and 2 are working. I tried a lot with many combinations but the expire and rewrite rule (3-6) do not work at all. I also tried moving these rules to apache2.conf and .htaccess files but it didn't work either. It does not give any error but these rules are simple ignored. expires and rewrite modules are ENABLED. Please let me know what should I do to fix this. 1. Do I need to add something else in httpd.conf file (like Options +FollowSymLink) or something else? 2. Do I need to add something in apache2.conf file? 3. Do I need to move these rules to .htaccess file? If yes, what should I write in that file and where should I keep that file? in /etc/apache2/ folder or /var/www/ folder? 4. Any other info to make this work? Thanks, Ankit

  Read the article

• iptables syn flood countermeasure

  - by Penegal

  I'm trying to adjust my iptables firewall to increase the security of my server, and I found something a bit problematic here : I have to set INPUT policy to ACCEPT and, in addition, to have a rule saying iptables -I INPUT -i eth0 -j ACCEPT. Here comes my script (launched manually for tests) : #!/bin/sh IPT=/sbin/iptables echo "Clearing firewall rules" $IPT -F $IPT -Z $IPT -t nat -F $IPT -t nat -Z $IPT -t mangle -F $IPT -t mangle -Z $IPT -X echo "Defining logging policy for dropped packets" $IPT -N LOGDROP $IPT -A LOGDROP -j LOG -m limit --limit 5/min --log-level debug --log-prefix "iptables rejected: " $IPT -A LOGDROP -j DROP echo "Setting firewall policy" $IPT -P INPUT DROP # Deny all incoming connections $IPT -P OUTPUT ACCEPT # Allow all outgoing connections $IPT -P FORWARD DROP # Deny all forwaring echo "Allowing connections from/to lo and incoming connections from eth0" $IPT -I INPUT -i lo -j ACCEPT $IPT -I OUTPUT -o lo -j ACCEPT #$IPT -I INPUT -i eth0 -j ACCEPT echo "Setting SYN flood countermeasures" $IPT -A INPUT -p tcp -i eth0 --syn -m limit --limit 100/second --limit-burst 200 -j LOGDROP echo "Allowing outgoing traffic corresponding to already initiated connections" $IPT -A OUTPUT -p ALL -m state --state ESTABLISHED,RELATED -j ACCEPT echo "Allowing incoming SSH" $IPT -A INPUT -p tcp --dport 22 -m state --state NEW -m recent --set --name SSH -j ACCEPT echo "Setting SSH bruteforce attacks countermeasures (deny more than 10 connections every 10 minutes)" $IPT -A INPUT -p tcp --dport 22 -m recent --update --seconds 600 --hitcount 10 --rttl --name SSH -j LOGDROP echo "Allowing incoming traffic for HTTP, SMTP, NTP, PgSQL and SolR" $IPT -A INPUT -p tcp --dport 25 -i eth0 -j ACCEPT $IPT -A INPUT -p tcp --dport 80 -i eth0 -j ACCEPT $IPT -A INPUT -p udp --dport 123 -i eth0 -j ACCEPT $IPT -A INPUT -p tcp --dport 5433 -i eth0.2654 -s 172.16.0.2 -j ACCEPT $IPT -A INPUT -p udp --dport 5433 -i eth0.2654 -s 172.16.0.2 -j ACCEPT $IPT -A INPUT -p tcp --dport 8983 -i eth0.2654 -s 172.16.0.2 -j ACCEPT $IPT -A INPUT -p udp --dport 8983 -i eth0.2654 -s 172.16.0.2 -j ACCEPT echo "Allowing outgoing traffic for ICMP, SSH, whois, SMTP, DNS, HTTP, PgSQL and SolR" $IPT -A OUTPUT -p tcp --dport 22 -j ACCEPT $IPT -A OUTPUT -p tcp --dport 25 -o eth0 -j ACCEPT $IPT -A OUTPUT -p tcp --dport 43 -o eth0 -j ACCEPT $IPT -A OUTPUT -p tcp --dport 53 -o eth0 -j ACCEPT $IPT -A OUTPUT -p udp --dport 53 -o eth0 -j ACCEPT $IPT -A OUTPUT -p tcp --dport 80 -o eth0 -j ACCEPT $IPT -A OUTPUT -p udp --dport 80 -o eth0 -j ACCEPT #$IPT -A OUTPUT -p tcp --dport 5433 -o eth0 -d 176.31.236.101 -j ACCEPT #$IPT -A OUTPUT -p udp --dport 5433 -o eth0 -d 176.31.236.101 -j ACCEPT #$IPT -A OUTPUT -p tcp --dport 8983 -o eth0 -d 176.31.236.101 -j ACCEPT #$IPT -A OUTPUT -p udp --dport 8983 -o eth0 -d 176.31.236.101 -j ACCEPT $IPT -A OUTPUT -p tcp --sport 5433 -o eth0.2654 -j ACCEPT $IPT -A OUTPUT -p udp --sport 5433 -o eth0.2654 -j ACCEPT $IPT -A OUTPUT -p tcp --sport 8983 -o eth0.2654 -j ACCEPT $IPT -A OUTPUT -p udp --sport 8983 -o eth0.2654 -j ACCEPT $IPT -A OUTPUT -p icmp -j ACCEPT echo "Allowing outgoing FTP backup" $IPT -A OUTPUT -p tcp --dport 20:21 -o eth0 -d 91.121.190.78 -j ACCEPT echo "Dropping and logging everything else" $IPT -A INPUT -s 0/0 -j LOGDROP $IPT -A OUTPUT -j LOGDROP $IPT -A FORWARD -j LOGDROP echo "Firewall loaded." echo "Maintaining new rules for 3 minutes for tests" sleep 180 $IPT -nvL echo "Clearing firewall rules" $IPT -F $IPT -Z $IPT -t nat -F $IPT -t nat -Z $IPT -t mangle -F $IPT -t mangle -Z $IPT -X $IPT -P INPUT ACCEPT $IPT -P OUTPUT ACCEPT $IPT -P FORWARD ACCEPT When I launch this script (I only have a SSH access), the shell displays every message up to Maintaining new rules for 3 minutes for tests, the server is unresponsive during the 3 minutes delay and then resume normal operations. The only solution I found until now was to set $IPT -P INPUT ACCEPT and $IPT -I INPUT -i eth0 -j ACCEPT, but this configuration does not protect me of any attack, which is a great shame for a firewall. I suspect that the error comes from my script and not from iptables, but I don't understand what's wrong with my script. Could some do-gooder explain me my error, please? EDIT: here comes the result of iptables -nvL with the "accept all input" ($IPT -P INPUT ACCEPT and $IPT -I INPUT -i eth0 -j ACCEPT) solution : Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 1 52 ACCEPT all -- eth0 * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 0 0 LOGDROP tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp flags:0x17/0x02 limit: avg 100/sec burst 200 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 state NEW recent: SET name: SSH side: source 0 0 LOGDROP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 recent: UPDATE seconds: 600 hit_count: 10 TTL-Match name: SSH side: source 0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 0 0 ACCEPT udp -- eth0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:123 0 0 ACCEPT tcp -- eth0.2654 * 172.16.0.2 0.0.0.0/0 tcp dpt:5433 0 0 ACCEPT udp -- eth0.2654 * 172.16.0.2 0.0.0.0/0 udp dpt:5433 0 0 ACCEPT tcp -- eth0.2654 * 172.16.0.2 0.0.0.0/0 tcp dpt:8983 0 0 ACCEPT udp -- eth0.2654 * 172.16.0.2 0.0.0.0/0 udp dpt:8983 0 0 LOGDROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 LOGDROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- * lo 0.0.0.0/0 0.0.0.0/0 2 728 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:43 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:53 0 0 ACCEPT udp -- * eth0 0.0.0.0/0 0.0.0.0/0 udp dpt:53 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 0 0 ACCEPT udp -- * eth0 0.0.0.0/0 0.0.0.0/0 udp dpt:80 0 0 ACCEPT tcp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 tcp spt:5433 0 0 ACCEPT udp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 udp spt:5433 0 0 ACCEPT tcp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 tcp spt:8983 0 0 ACCEPT udp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 udp spt:8983 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 91.121.190.78 tcp dpts:20:21 0 0 LOGDROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain LOGDROP (5 references) pkts bytes target prot opt in out source destination 0 0 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 5/min burst 5 LOG flags 0 level 7 prefix `iptables rejected: ' 0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 EDIT #2 : I modified my script (policy ACCEPT, defining authorized incoming packets then logging and dropping everything else) to write iptables -nvL results to a file and to allow only 10 ICMP requests per second, logging and dropping everything else. The result proved unexpected : while the server was unavailable to SSH connections, even already established, I ping-flooded it from another server, and the ping rate was restricted to 10 requests per second. During this test, I also tried to open new SSH connections, which remained unanswered until the script flushed rules. Here comes the iptables stats written after these tests : Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 600 35520 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 6 360 LOGDROP tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp flags:0x17/0x02 limit: avg 100/sec burst 200 0 0 LOGDROP tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 STRING match "w00tw00t.at.ISC.SANS." ALGO name bm TO 65535 0 0 LOGDROP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 STRING match "Host: anoticiapb.com.br" ALGO name bm TO 65535 0 0 LOGDROP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 STRING match "Host: www.anoticiapb.com.br" ALGO name bm TO 65535 105 8820 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 10/sec burst 5 830 69720 LOGDROP icmp -- * * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 state NEW recent: SET name: SSH side: source 0 0 LOGDROP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 recent: UPDATE seconds: 600 hit_count: 10 TTL-Match name: SSH side: source 0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 0 0 ACCEPT udp -- eth0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:80 0 0 ACCEPT udp -- eth0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:123 0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 0 0 ACCEPT tcp -- eth0.2654 * 172.16.0.1 0.0.0.0/0 tcp spt:5433 0 0 ACCEPT udp -- eth0.2654 * 172.16.0.1 0.0.0.0/0 udp spt:5433 0 0 ACCEPT tcp -- eth0.2654 * 172.16.0.1 0.0.0.0/0 tcp spt:8983 0 0 ACCEPT udp -- eth0.2654 * 172.16.0.1 0.0.0.0/0 udp spt:8983 16 1684 LOGDROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 LOGDROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 600 35520 ACCEPT all -- * lo 0.0.0.0/0 0.0.0.0/0 0 0 LOGDROP tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 owner UID match 33 0 0 LOGDROP udp -- * eth0 0.0.0.0/0 0.0.0.0/0 udp dpt:80 owner UID match 33 116 11136 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:53 0 0 ACCEPT udp -- * eth0 0.0.0.0/0 0.0.0.0/0 udp dpt:53 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 0 0 ACCEPT udp -- * eth0 0.0.0.0/0 0.0.0.0/0 udp dpt:80 0 0 ACCEPT tcp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 tcp dpt:5433 0 0 ACCEPT udp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 udp dpt:5433 0 0 ACCEPT tcp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 tcp dpt:8983 0 0 ACCEPT udp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 udp dpt:8983 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:43 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 91.121.190.18 tcp dpts:20:21 7 1249 LOGDROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain LOGDROP (11 references) pkts bytes target prot opt in out source destination 35 3156 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 1/sec burst 5 LOG flags 0 level 7 prefix `iptables rejected: ' 859 73013 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 Here comes the log content added during this test : Mar 28 09:52:51 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=52 TOS=0x00 PREC=0x00 TTL=51 ID=55666 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:52:51 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=52 TOS=0x00 PREC=0x00 TTL=51 ID=55667 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:52:51 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=64 TOS=0x00 PREC=0x00 TTL=51 ID=55668 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:52:51 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=64 TOS=0x00 PREC=0x00 TTL=51 ID=55669 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:52:52 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=64 TOS=0x00 PREC=0x00 TTL=51 ID=55670 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:52:54 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=64 TOS=0x00 PREC=0x00 TTL=51 ID=55671 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:52:58 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=64 TOS=0x00 PREC=0x00 TTL=51 ID=55672 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:52:59 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=6 Mar 28 09:52:59 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=7 Mar 28 09:52:59 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=8 Mar 28 09:52:59 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=9 Mar 28 09:52:59 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=59 Mar 28 09:53:00 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=152 Mar 28 09:53:01 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=246 Mar 28 09:53:02 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=339 Mar 28 09:53:03 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=432 Mar 28 09:53:04 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=524 Mar 28 09:53:05 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=617 Mar 28 09:53:06 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=711 Mar 28 09:53:07 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=804 Mar 28 09:53:08 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=897 Mar 28 09:53:16 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:c0:62:6b:e3:5c:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=60 TOS=0x00 PREC=0x00 TTL=51 ID=61402 DF PROTO=TCP SPT=57637 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 Mar 28 09:53:19 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:c0:62:6b:e3:5c:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=60 TOS=0x00 PREC=0x00 TTL=51 ID=61403 DF PROTO=TCP SPT=57637 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 Mar 28 09:53:21 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=64 TOS=0x00 PREC=0x00 TTL=51 ID=55674 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:53:25 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:c0:62:6b:e3:5c:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=60 TOS=0x00 PREC=0x00 TTL=51 ID=61404 DF PROTO=TCP SPT=57637 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 Mar 28 09:53:37 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=116 TOS=0x00 PREC=0x00 TTL=51 ID=55675 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK PSH URGP=0 Mar 28 09:53:37 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=116 TOS=0x00 PREC=0x00 TTL=51 ID=55676 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK PSH URGP=0 Mar 28 09:53:37 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=180 TOS=0x00 PREC=0x00 TTL=51 ID=55677 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK PSH URGP=0 Mar 28 09:53:38 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=180 TOS=0x00 PREC=0x00 TTL=51 ID=55678 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK PSH URGP=0 Mar 28 09:53:39 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=180 TOS=0x00 PREC=0x00 TTL=51 ID=55679 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK PSH URGP=0 Mar 28 09:53:39 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:c0:62:6b:e3:5c:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=60 TOS=0x00 PREC=0x00 TTL=51 ID=5055 DF PROTO=TCP SPT=57638 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 Mar 28 09:53:41 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=180 TOS=0x00 PREC=0x00 TTL=51 ID=55680 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK PSH URGP=0 Mar 28 09:53:42 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:c0:62:6b:e3:5c:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=60 TOS=0x00 PREC=0x00 TTL=51 ID=5056 DF PROTO=TCP SPT=57638 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 Mar 28 09:53:45 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=180 TOS=0x00 PREC=0x00 TTL=51 ID=55681 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK PSH URGP=0 Mar 28 09:53:48 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:c0:62:6b:e3:5c:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=60 TOS=0x00 PREC=0x00 TTL=51 ID=5057 DF PROTO=TCP SPT=57638 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 If I correctly interpreted these results, they say that ICMP rules were correctly interpreted by iptables, but SSH rules were not. This does not make any sense... Does somebody understand where my error comes from? EDIT #3 : After some more tests, I found out that commenting the SYN flood countermeasure removes the problem. I continue researches in this way but, meanwhile, if somebody sees my anti SYN flood rule error...

  Read the article

• Monitoring slow nginx/unicorn requests

  - by injekt

  I'm currently using Nginx to proxy requests to a Unicorn server running a Sinatra application. The application only has a couple of routes defined, those of which make fairly simple (non costly) queries to a PostgreSQL database, and finally return data in JSON format, these services are being monitored by God. I'm currently experiencing extremely slow response times from this application server. I have another two Unicorn servers being proxied via Nginx, and these are responding perfectly fine, so I think I can rule out any wrong doing from Nginx. Here is my God configuration: # God configuration APP_ROOT = File.expand_path '../', File.dirname(__FILE__) God.watch do |w| w.name = "app_name" w.interval = 30.seconds # default w.start = "cd #{APP_ROOT} && unicorn -c #{APP_ROOT}/config/unicorn.rb -D" # -QUIT = graceful shutdown, waits for workers to finish their current request before finishing w.stop = "kill -QUIT `cat #{APP_ROOT}/tmp/unicorn.pid`" w.restart = "kill -USR2 `cat #{APP_ROOT}/tmp/unicorn.pid`" w.start_grace = 10.seconds w.restart_grace = 10.seconds w.pid_file = "#{APP_ROOT}/tmp/unicorn.pid" # User under which to run the process w.uid = 'web' w.gid = 'web' # Cleanup the pid file (this is needed for processes running as a daemon) w.behavior(:clean_pid_file) # Conditions under which to start the process w.start_if do |start| start.condition(:process_running) do |c| c.interval = 5.seconds c.running = false end end # Conditions under which to restart the process w.restart_if do |restart| restart.condition(:memory_usage) do |c| c.above = 150.megabytes c.times = [3, 5] # 3 out of 5 intervals end restart.condition(:cpu_usage) do |c| c.above = 50.percent c.times = 5 end end w.lifecycle do |on| on.condition(:flapping) do |c| c.to_state = [:start, :restart] c.times = 5 c.within = 5.minute c.transition = :unmonitored c.retry_in = 10.minutes c.retry_times = 5 c.retry_within = 2.hours end end end Here is my Unicorn configuration: # Unicorn configuration file APP_ROOT = File.expand_path '../', File.dirname(__FILE__) worker_processes 8 preload_app true pid "#{APP_ROOT}/tmp/unicorn.pid" listen 8001 stderr_path "#{APP_ROOT}/log/unicorn.stderr.log" stdout_path "#{APP_ROOT}/log/unicorn.stdout.log" before_fork do |server, worker| old_pid = "#{APP_ROOT}/tmp/unicorn.pid.oldbin" if File.exists?(old_pid) && server.pid != old_pid begin Process.kill("QUIT", File.read(old_pid).to_i) rescue Errno::ENOENT, Errno::ESRCH # someone else did our job for us end end end I have checked God status logs but it appears CPU and Memory Usage are never out of bounds. I also have something to kill high memory workers, which can be found on the GitHub blog page here. When running a tail -f on the Unicorn logs I see some requests, but they're far and few between, when I was at around 60-100 a second before this trouble seemed to have arrived. This log also shows workers being reaped and started as expected. So my question is, how would I go about debugging this? What are the next steps I should be taking? I'm extremely baffled that the server will sometimes respond quickly, but at others time it's very slow, for long periods of time (which may or may not be peak traffic times). Any advice is much appreciated.

  Read the article

• openstack, bridging, netfilter and dnat

  - by Craig Sanders

  In a recent upgrade (from Openstack Diablo on Ubuntu Lucid to Openstack Essex on Ubuntu Precise), we found that DNS packets were frequently (almost always) dropped on the bridge interface (br100). For our compute-node hosts, that's a Mellanox MT26428 using the mlx4_en driver module. We've found two workarounds for this: Use an old lucid kernel (e.g. 2.6.32-41-generic). This causes other problems, in particular the lack of cgroups and the old version of the kvm and kvm_amd modules (we suspect the kvm module version is the source of a bug we're seeing where occasionally a VM will use 100% CPU). We've been running with this for the last few months, but can't stay here forever. With the newer Ubuntu Precise kernels (3.2.x), we've found that if we use sysctl to disable netfilter on bridge (see sysctl settings below) that DNS started working perfectly again. We thought this was the solution to our problem until we realised that turning off netfilter on the bridge interface will, of course, mean that the DNAT rule to redirect VM requests for the nova-api-metadata server (i.e. redirect packets destined for 169.254.169.254:80 to compute-node's-IP:8775) will be completely bypassed. Long-story short: with 3.x kernels, we can have reliable networking and broken metadata service or we can have broken networking and a metadata service that would work fine if there were any VMs to service. We haven't yet found a way to have both. Anyone seen this problem or anything like it before? got a fix? or a pointer in the right direction? Our suspicion is that it's specific to the Mellanox driver, but we're not sure of that (we've tried several different versions of the mlx4_en driver, starting with the version built-in to the 3.2.x kernels all the way up to the latest 1.5.8.3 driver from the mellanox web site. The mlx4_en driver in the 3.5.x kernel from Quantal doesn't work at all) BTW, our compute nodes have supermicro H8DGT motherboards with built-in mellanox NIC: 02:00.0 InfiniBand: Mellanox Technologies MT26428 [ConnectX VPI PCIe 2.0 5GT/s - IB QDR / 10GigE] (rev b0) we're not using the other two NICs in the system, only the Mellanox and the IPMI card are connected. Bridge netfilter sysctl settings: net.bridge.bridge-nf-call-arptables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-ip6tables = 0 Since discovering this bridge-nf sysctl workaround, we've found a few pages on the net recommending exactly this (including Openstack's latest network troubleshooting page and a launchpad bug report that linked to this blog-post that has a great description of the problem and the solution)....it's easier to find stuff when you know what to search for :), but we haven't found anything on the DNAT issue that it causes.

  Read the article

• VMWare Network bug in multiple VMWare Workstation versions if using a hardcoded IP address

  - by onyxruby

  I'm having a very tricky problem with some of my VM sessions being unable to reach the Internet or even ping the gateway. I have just set up a new VM Workstation (7) on a W2K8 64bit server (I'll be converting to ESXI 4 once I can find a decent book on it, so for the meanwhile I use workstation). I have imported a number of VM's and setup some new ones on the server.In short the problem with some of the VM's being unable to reach the Internet is that they can't reach the gateway. I've looking at a number of things and can pretty safely rule out the following: Switch, Router, DHCP Server, DNS, Client IP configuration, Routes and typos. The problem is that some of the new clients cannot reach the gateway if their IP address is hardcoded, they can't even ping it by IP address. That rules out DNS and DHCP. Now, if I allow them to get their IP address by DHCP they can reach the gateway and Internet without issue. The interesting thing on this, is that this behavior occurs even if I leave the DNS information hardcoded under TCP/IP settings. It doesn't work unless the IP and gateway are handed out by DHCP even though the same information IP info is being used by the host. Fundamentally from the standpoint of the clients, they are trying to reach the exact same gateway using the exact same IP information regardless of whether they are hardcoded or assigned by DHCP. Here's an example of one client. IP Address 192.168.7.66 - Subnet Mask 255.255.255.0 - Gateway 192.168.7.254 - DNS1 192.168.7.44 - DNS2 192.168.7.254. The issue occurs across six different microsoft operating systems, Windows 7 and Windows 2008 variants all have the issue. My W2K3, XP, Vista and W98 clients all work without issue with hardcoded IP addresses. I have tried things like rearranging the DNS order, flushing DNS and so on. It's not a routing or switch issue as the clients can work just fine if they get their IP by DHCP. It's not a paramater issue as the exact same paramaters are handed out by DHCP as I plug in by hand. It's not a DNS issue as clients cant reach other clients even with IP addresses only. I have run a tracert to the gateway by IP address and it times out on the very first hop before failing on hop3 with destination host unreachable. If I get the IP address by DHCP the tracert finds the gateway (and Internet) without issue. I have read a few other posts online in forums talking about this problem randomly occuring over the years in other VM versions as well, so I suspect some kind of long standing bug. Does anyone have any ideas on this? Is it possibly a bug with Windows 7 and W2K clients under VM?

  Read the article

• Local, Multiple-Blog (ie Dashboard) Blogging Software as Alternative to Blogger [closed]

  - by Synetech inc.

  FOR RE-OPENING: I don’t see how it is “too localized”. Plenty of people like to run their own web-apps instead of relying on third-party services. If that were not true, then WordPress, phpBB, Apache, PHP, etc. would not be available for general use. As for “Internet audience at large”, I must have missed the part where it was a rule that you are only allowed to ask for help for things that applies to everyone else too; I thought you were allowed to ask for help. Besides, if someone knows of software that fulfills the question, then it is relevant to whomever would download it, and so is not only applicable to an “extraordinarily narrow situation”. (Besides, the reason that I was asking was because Google had announced that it was discontinuing FTP support for Blogger and so many people were affected—read NOT TOO LOCALIZED—and were trying to find alternatives.) Hi, I am trying to find software (for Windows, PHP, MySQL/SQLite/flat, free, open-source) to localize all of my software and service so that I can keep my files and host when needed from my own system instead of some remote computer. I’ve already selected things like web, FTP, and db servers. I’ve chosen forum and wiki software, as well as an RCS system. At this point, all I’m still looking for—actually, I still need to choose bug-tracking software, but besides that—is blogging software. I still use Blogger and am trying to find something that I can use to import my Blogger stuff and store on (and publish to) my home system. I have read of various blogging software including WordPress, MovableType, and TextPattern. The problem is that I am trying to find something that is like Blogger (which from what I can tell is not available on Google Code as open-source). What I specifically need is multiple-blog support. That is, multiple blogs ala the Blogger Dashboard, not multiple user accounts (although that is important as well). The closest thing that I have been able to find is using Wordpress categories to simulate multiple blogs, but that’s not really what I want. I want software that I can run locally that has a multi-blog dashboard like Blogger. Any ideas? Thanks a lot!

  Read the article

• How to deny the web access to some files?

  - by Strae

  I need to do an operation a bit strange. First, i run on Debian, apache2 (which 'runs' as user www-data) So, I have simple text file with .txt ot .ini, or whatever extension, doesnt matter. These files are located in subfolders with a structure like this: www.example.com/folder1/car/foobar.txt www.example.com/folder1/cycle/foobar.txt www.example.com/folder1/fish/foobar.txt www.example.com/folder1/fruit/foobar.txt therefore, the file name always the same, ditto for the 'hierarchy', just change the name of the folder: /folder-name-static/folder-name-dinamyc/file-name-static.txt What I should do is (I think) relatively simple: I must be able to read that file by programs on the server (python, php for example), but if I try to retrieve the file contents by broswer (digiting the url www.example.com/folder1/car/foobar.txt, or via cUrl, etc..) I must get a forbidden error, or whatever, but not access the file. It would also be nice that even accessing those files via FTP are 'hidden', or anyway couldnt be downloaded (at least that I use with the ftp root and user data) How can I do? I found this online, be put in the file .htaccess: <Files File.txt> Order allow, deny Deny from all </ Files> It seems to work, but only if the file is in the web root (www.example.com / myfile.txt), and not in subfolders. Moreover, the folders in the second level (www.example.com/folder1/fruit/foobar.txt) will be dinamycally created.. I would like to avoid having to change .htaccess file from time to time. It is possible to create a rule, something like that, that goes for all files with given name, which is on www.example.com/folder-name-static/folder-name-dinamyc/file-name-static.txt, where those parts are allways the same, just that one change ? EDIT: As Dave Drager said, i could semplify this keeping those file outside the web accessible directory. But those directory's will contain others files too, images, and stuff used by my users, so i'm simply try to not have a duplicate folders system, like: /var/www/vhosts/example.com/httpdocs/folder1/car/[other folders and files here] /var/www/vhosts/example.com/httpdocs/folder1/cycle/[other folders and files here] /var/www/vhosts/example.com/httpdocs/folder1/fish/[other folders and files here] //and, then for the 'secrets' files: /folder1/data/car/foobar.txt /folder1/data/cycle/foobar.txt /folder1/data/fish/foobar.txt

  Read the article

• Windows 7 x64 installation freezes on new PC build

  - by jhsowter

  Symptoms While attempting to install Windows 7 (64 bit) on my new PC build, it freezes usually at the point where it is expanding the windows image, but has frozen as early as accepting the licence agreement, and as late as just after the first restart. My specs are at the bottom of the post. So far I have tried the following to identify the problem, in rough chronological order: Tried different hard drives with different sata cables. Same symptoms. I later used a different computer to install windows on the same hard drive with no problems. Tried the RAM in different slots, and tried one RAM stick instead of two. Same symptoms. Updated the BIOS to 1.60. Same symptoms. Ran Memtest86+ with RAM in dual channel. It passed about 6 times when I left it running overnight. Used USB to install windows instead of an optical drive. Same symptoms. Change SATA configuration from AHCI to IDE. Same symptoms. Tried various different SATA ports. Same symptoms. Updated BIOS to 1.70. Same symptoms. I saw the RAM did not list my motherboard as being supported even though the motherboard did list the RAM as being supported. So I tried some Kingston DDR3 1333MHz RAM instead. Same symptoms. Other (possibly) pertinent information My CPU idles at about 30 °C. I can't tell what it gets to when it's working. When I installed the CPU, the lever which locks the CPU in place took quite a bit of force to pull down. Now I didn't just yank it down without rechecking the CPU was seated properly about 5 times, but it does seems unusual, and I wonder if the CPU was seated badly if I would see these symptoms? I am out of ideas and don't know how to diagnose any further. I suppose either the motherboard or CPU must be the problem. I am on the verge of taking it to a specialist. The Question How should I proceed from here? Is there anything I can rule out as being the source of the symptoms I am seeing? My Specs CPU: Intel i5 3570k RAM: G.Skill RipjawsX 8GB kit HDD: single 3.5" 500GB SATA or 160GB 2.5" SATA (at different times and sometime together. But no RAID or anything). MB: ASRock Extreme4 Z77 PSU: Silverstone Strider Plus 600W ST60F-P

  Read the article

• How to Block a HTTP Website along with Its All Subdomain using IPTABLE

  - by netnovice

  I run a small HTTP web proxy site . We can not modify anything there in Proxy program. Few users mainly use Yahoo Web mail for Spamming and We need to block yahoo web mail access only ( complete yahoo website is also Ok) through our proxy . specially .mail.yahoo.com.. Like - we need to block URL like - http://uk-mg61.mail.yahoo.com http://in-mg61.mail.yahoo.com etc. etc. Note : We generaly open http://mail.yahoo.com in browser - but after loggin in it forwards it to Urls like above but all those are subdomain of mail.yahoo.com My target is if we can get all IP list for all available subdomain of mail.yahoo.com I can block it totally . We can only use IPTABLE ...I know using proxy itself we can check HTTP header and check Host field for .mail.yahoo.com. and block it. Solution : Follwoign what I did using IPtable . I collected IP CIDR block for yahoo mainly for yahoo web mail ( mail.yahoo.com ) as much as possible ( using linux host and whois command ) [ like 66.163.160.0/19 nd 98.136.0.0/14 etc ] and applied follwing command Like iptables -A OUTPUT -p tcp -d 66.163.160.0/19 -m state --state NEW -j DROP etc. Things are working fine. user can not access yahoo mail BUT the problem is I need to be updated with the avaialble CIDR YAHOO IP list ... I am ready to do it every week. I collected many from Net... You know theer are countles subdomain of mail.yahoo.com and seems every week Yahoo adding new IP... But what I observed some time user can bypass our rule and the reason obvously all the avaialble Ips are not entered in IPtable yet. What we need to do is enter all Ips of mail.yahoo.co But where do I find all subdomain for mail.yahoo.com I know we can get it from DNS but I must not be allowed to make DNS axfr query. Also doing reverse DNS will have performance issue. I want to know all subdomain of .mail.yahoo.c Can I get it from yahoo site. I have the list of all YAHOO smtp IP....but I need webmail Ip... ( http://public.yahoo.com/carloc/ymail.html ) Can you please share your Idea. Thank you

  Read the article

• Forward all traffic through an ssh tunnel

  - by Eamorr

  I hope someone can follow this and I'll explain as best I can. I'm trying to forward all traffic from port 6999 on x.x.x.224, through an ssh tunnel, and onto port 7000 on x.x.x.218. Here is some ASCII art: |browser|-----|Squid on x.x.x.224|------|ssh tunnel|------<satellite link>-----|Squid on x.x.x.218|-----|www| 3128 6999 7000 80 When I remove the ssh tunnel, everything works fine. The idea is to turn off encryption on the ssh tunnel (to save bandwidth) and turn on maximum compression (to save more bandwidth). This is because it's a satellite link. Here's the ssh tunnel I've been using: ssh -C -f -C -o CompressionLevel=9 -o Cipher=none [email protected] -L 7000:172.16.1.224:6999 -N The trouble is, I don't know how to get data from Squid on x.x.x.224 into the ssh tunnel? Am I going about this the wrong way? Should I create an ssh tunnel on x.x.x.218? I use iptables to stop squid on x.x.x.224 from reading port 80, but to feed from port 6999 instead (i.e. via the ssh tunnel). Do I need another iptables rule? Any comments greatly appreciated. Many thanks in advance, Regarding Eduardo Ivanec's question, here is a netstat -i any port 7000 -nn dump from x.x.x.218: 14:42:15.386462 IP 172.16.1.224.40006 > 172.16.1.218.7000: Flags [S], seq 2804513708, win 14600, options [mss 1460,sackOK,TS val 86702647 ecr 0,nop,wscale 4], length 0 14:42:15.386690 IP 172.16.1.218.7000 > 172.16.1.224.40006: Flags [R.], seq 0, ack 2804513709, win 0, length 0 Update 2: When I run the second command, I get the following error in my browser: ERROR The requested URL could not be retrieved The following error was encountered while trying to retrieve the URL: http://109.123.109.205/index.php Zero Sized Reply Squid did not receive any data for this request. Your cache administrator is webmaster. Generated Fri, 01 Jul 2011 16:06:06 GMT by remote-site (squid/2.7.STABLE9) remote-site is 172.16.1.224 When I do a tcpdump -i any port 7000 -nn I get the following: root@remote-site:~# tcpdump -i any port 7000 -nn tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on any, link-type LINUX_SLL (Linux cooked), capture size 65535 bytes channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused

  Read the article

• why can't I open a port on Win 7? is it the app's fault?

  - by rjnagle

  I am having problems opening a port from one Windows PC on my local network. On Windows 7 computer ("Computer A") I running Calibre, an ebook management program that has something called an "ebook content server" . In essence, it serves via the web a content catalog. From Computer A, I can access the content server on localhost. ie. http://127.0.0.1:8787 calls up the content server successfully. With ipconfig I have confirmed that its local IP address is 192.168.1.106 From Computer B (a Vista Machine) I can ping 192.168.1.106 I have tried opening/editing a port in the Windows Firewall several times. In Windows firewall -- Allowed Programs in Control Panel, I see a listing for Calibre (with both Home/Work and PUblic checked) In details, I see Name: Calibre, Port Number 8787, Protocol TCP If I use the Advanced Security configuration screen for the firewall, I created an Inbound Rule on Computer A for Calibre (with the settings I indicated). If I run this command line on Computer A, I see: netstat -a -n TCP 0.0.0.0:554 0.0.0.0:0 LISTENING TCP 0.0.0.0:664 0.0.0.0:0 LISTENING TCP 0.0.0.0:2869 0.0.0.0:0 LISTENING TCP 0.0.0.0:3306 0.0.0.0:0 LISTENING TCP 0.0.0.0:5357 0.0.0.0:0 LISTENING TCP 0.0.0.0:6570 0.0.0.0:0 LISTENING TCP 0.0.0.0:6580 0.0.0.0:0 LISTENING TCP 0.0.0.0:8787 0.0.0.0:0 LISTENING TCP 0.0.0.0:10243 0.0.0.0:0 LISTENING TCP 192.168.1.106:63020 74.125.227.51:80 TIME_WAIT TCP [::]:80 [::]:0 LISTENING TCP [::]:135 [::]:0 LISTENING TCP [::]:443 [::]:0 LISTENING TCP [::]:445 [::]:0 LISTENING TCP [::]:554 [::]:0 LISTENING TCP [::]:2869 [::]:0 LISTENING TCP [::]:5357 [::]:0 LISTENING TCP [::]:6570 [::]:0 LISTENING TCP [::]:6580 [::]:0 LISTENING TCP [::]:10243 [::]:0 LISTENING TCP [::]:49152 [::]:0 LISTENING TCP [::]:49153 [::]:0 LISTENING TCP [::]:49154 [::]:0 LISTENING TCP [::]:49155 [::]:0 LISTENING TCP [::]:49170 [::]:0 LISTENING And lots of other junk, but this seems relevant, I see port 80 is open (I run xampp apache web server for windows on Machine A) This is the only time I see port 8787 referenced from the netstat commmand. From Windows Computer B, I can, ping 192.168.1.106 and even view http://drupal.local (on Computer A) and http://192.168.1.106/ (which goes to the Xampp config screen on Computer A). But I cannot access via Computer B htttp://192.168.1.106:8787 or htttp://computerhosta:8787 So what is going wrong? Is this a problem with the Calibre application or have I incorrectly opened the port? What things could possibly interfere with the opening of this port? On a sidenote, I have tried using telnet from Computer B to see if port 80 or 8787 is open for 192.168.1.106. I get no reply for either one. Thanks.

  Read the article

• Apache2 - mod_expire and mod_rewrite not working in httpd.conf - serving content from tomcat

  - by Ankit Agrawal

  I am using apache2 server running on debian which forwards all the http request to tomcat installed on same machine. I have two files under my /etc/apache2/ folder apache2.conf and httpd.conf I modified httpd.conf file to look like following. # forward all http request on port 80 to tomcat ProxyPass / ajp://127.0.0.1:8009/ ProxyPassReverse / ajp://127.0.0.1:8009/ # gzip text content AddOutputFilterByType DEFLATE text/plain AddOutputFilterByType DEFLATE text/html AddOutputFilterByType DEFLATE text/xml AddOutputFilterByType DEFLATE text/css AddOutputFilterByType DEFLATE text/javascript AddOutputFilterByType DEFLATE application/xml AddOutputFilterByType DEFLATE application/xhtml+xml AddOutputFilterByType DEFLATE application/rss+xml AddOutputFilterByType DEFLATE application/javascript AddOutputFilterByType DEFLATE application/x-javascript DeflateCompressionLevel 9 BrowserMatch ^Mozilla/4 gzip-only-text/html BrowserMatch ^Mozilla/4\.0[678] no-gzip BrowserMatch \bMSIE !no-gzip !gzip-only-text/html # Turn on Expires and mark all static content to expire in a week # unset last modified and ETag ExpiresActive On ExpiresDefault A0 <FilesMatch "\.(jpg|jpeg|png|gif|js|css|ico)$" ExpiresDefault A604800 Header unset Last-Modified Header unset ETag FileETag None Header append Cache-Control "max-age=604800, public" </FilesMatch RewriteEngine On # rewrite all www.example.com/content/XXX-01.js and YYY-01.css files to XXX.js and YYY.css RewriteRule ^content/(js|css)/([a-z]+)-([0-9]+)\.(js|css)$ /content/$1/$2.$4 # remove all query parameters from URL after we are done with it RewriteCond %{THE_REQUEST} ^GET\ /.*\;.*\ HTTP/ RewriteCond %{QUERY_STRING} !^$ RewriteRule .* http://example.com%{REQUEST_URI}? [R=301,L] # rewrite all www.example.com to example.com RewriteCond %{HTTP_HOST} ^www\.example\.com$ [NC] RewriteRule ^(.*)$ http://example.com/$1 [R=301,L] I want to achieve following. forward all traffic to tomcat GZIP all the text content. Put 1 week expiry header to all static files and unset ETag/last modified header. rewrite all js and css file to certain format. remove all the query parameters from URL forward all www.example.com to example.com The problem is only 1 and 2 are working. I tried a lot with many combinations but the expire and rewrite rule (3-6) do not work at all. I also tried moving these rules to apache2.conf and .htaccess files but it didn't work either. It does not give any error but these rules are simple ignored. expires and rewrite modules are ENABLED. Please let me know what should I do to fix this. 1. Do I need to add something else in httpd.conf file (like Options +FollowSymLink) or something else? 2. Do I need to add something in apache2.conf file? 3. Do I need to move these rules to .htaccess file? If yes, what should I write in that file and where should I keep that file? in /etc/apache2/ folder or /var/www/ folder? 4. Any other info to make this work? Thanks, Ankit

  Read the article

• SQL server 2008 R2 installation error

  - by Sonia

  I have a windows 7,32 bit laptop. I am the administrator with all permissions. when I click on the SQL server 2008R2 set up file,it says : "SQL server set up has encountered the following error:Failed to retreive data for this request" click on OK. I have uninstalled all the components of SQL from control panel. I used Windows installer clean up to remove the files(which I must have not done ),but still no go. The summary.txt log says: Overall summary: Final result: Failed: see details below Exit code (Decimal): 847168662 Exit facility code: 638 Exit error code: 50326 Exit message: Failed to retrieve data for this request. Start time: 2012-05-25 14:59:15 End time: 2012-05-25 15:00:09 Requested action: RunRules Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120525_145905\Detail.txt Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.5500.0%26EvtType%3d0xEF814B06%400x92D13C14 Machine Properties: Machine name: EWAN-PC Machine processor count: 4 OS version: Windows Vista OS service pack: Service Pack 1 OS region: Australia OS language: English (United States) OS architecture: x86 Process architecture: 32 Bit OS clustered: No Package properties: Description: SQL Server Database Services 2008 SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9} ProductName: SQL2008 Type: RTM Version: 10 SPLevel: 0 Installation location: c:\385030d65c6ff61fb9\x86\setup\ Installation edition: EXPRESS User Input Settings: ACTION: RunRules CONFIGURATIONFILE: FEATURES: HELP: False INDICATEPROGRESS: False INSTANCENAME: QUIET: False QUIETSIMPLE: False RULES: GLOBALRULES,SqlUnsupportedProductBlocker,PerfMonCounterNotCorruptedCheck,Bids2005InstalledCheck,BlockInstallSxS,AclPermissionsFacet,FacetDomainControllerCheck,SSMS_IsInternetConnected,FacetWOW64PlatformCheck,FacetPowerShellCheck X86: False Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120525_145905\ConfigurationFile.ini Detailed results: Rules with failures: Global rules: There are no scenario-specific rules. Rules report file: The rule result report file is not available. Exception summary: The following is an exception stack listing the exceptions in outermost to innermost order Inner exceptions are being indented Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException Message: Failed to retrieve data for this request. Data: HelpLink.ProdName = Microsoft SQL Server HelpLink.BaseHelpUrl = http://go.microsoft.com/fwlink HelpLink.LinkId = 20476 DisableWatson = true Stack: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream) at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue() at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(HandleInternalException exceptionHandler) at Microsoft.SqlServer.Chainer.Setup.Setup.RunRequestedWorkflow() at Microsoft.SqlServer.Chainer.Setup.Setup.Run() at Microsoft.SqlServer.Chainer.Setup.Setup.Start() at Microsoft.SqlServer.Chainer.Setup.Setup.Main() Inner exception type: Microsoft.SqlServer.Configuration.Sco.ScoException Message: Attempted to perform an unauthorized operation. Data: WatsonData = HKEY_LOCAL_MACHINE@SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Microsoft SQL Server 10 Stack: at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.OpenSubKey(String subkey, RegistryAccess requestedAccess) at Microsoft.SqlServer.Configuration.Sco.SqlRegistryKey.OpenSubKey(String subkey, RegistryAccess requestedAccess) at Microsoft.SqlServer.Discovery.RegistryKeyExistsPropertyValueProvider.GetPropertyValue(Object[] context) at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetPropertyValueFromProvider(IPropertyValueProvider propertyValueProvider, String machineName, Object[] context) at Microsoft.SqlServer.Discovery.ObjectInstanceSettings.IsObjectFound(String machineName, String idFilter) at Microsoft.SqlServer.Discovery.Product.FilterObjectSet(ArrayList objects, String idFilter) at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent) at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData() at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci) at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request) at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request) Inner exception type: System.UnauthorizedAccessException Message: Attempted to perform an unauthorized operation. Stack: at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.OpenSubKey(String subkey, RegistryAccess requestedAccess) Ineed to install SQL server 2008 R2 for one of the company softwares to work. Any immediate help will be greatly appreciated. Thanks Sonia

  Read the article

• VPN - force a selective range of ip to run on VPN (linux)

  - by Francesco

  Preface: I know there are similar question here and there however I'm a kind of newbie on Net stuff so I need an answer on this specific scenario, hoping that can help others too as it is a common problem Let say I cannot do anything on the local switch to change the local ip range, I don't want to use any complicate trick as use VMachine to hide the local ip range but I want to use net tools to solve the issue. Scenario my local net assign me an IP of this class 192.168.1.xxx (ex. 192.168.1.116) and my VPN (VPNC) assign me IP of same class 192.168.1.xxx (ex. 192.168.1.247) Obviously I need VPN to access local address (ex. 192.168.1.100) but when I open any address of the class 192.168.1.xx the route point to my local net and not to the VPN ones. I'm on linux and i'd like gui solution (network manager) in case it is not possible let play with route command. here what network manager offer me: Here my actual route once connected to the VPN: Here some route information (route -n) Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 182.71.21.106 192.168.1.1 255.255.255.255 UGH 0 0 0 wlan0 182.71.21.106 192.168.1.1 255.255.255.255 UGH 0 0 0 wlan0 192.168.1.0 0.0.0.0 255.255.255.0 U 9 0 0 wlan0 192.168.1.246 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 Here my ifconfig : ppp0 Link encap:Point-to-Point Protocol inet addr:192.168.1.247 P-t-P:192.168.1.246 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1400 Metric:1 RX packets:3415 errors:0 dropped:0 overruns:0 frame:0 TX packets:2525 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:3682328 (3.6 MB) TX bytes:402315 (402.3 KB) wlan0 Link encap:Ethernet HWaddr 4c:eb:42:06:a3:a6 inet addr:192.168.1.116 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::4eeb:42ff:fe06:a3a6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:72598 errors:0 dropped:0 overruns:0 frame:0 TX packets:42300 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:76000532 (76.0 MB) TX bytes:13919400 (13.9 MB) The Question So basically I would like to add a rule to force this particular address (192.168.1.100) on the VPN and not on my local net

  Read the article

• varnish3, mod_geoip with apache2 using mod_rewrite and mod_rpaf

  - by mursalat

  I am maintaining a website with 3 different versions of the site, with 3 different languages, handles with a single system written in php, which takes in environment variables based on the domain name that is being accessed. These are the three sites: myshop.com : english international version myshop.eu : european version of site myshop.ru : russian version of the site when myshop.com is accessed from russia it is to be redirected to myshop.ru, and any country from europe accesses myshop.com, is redirected to myshop.eu, and international visitors stay at myshop.com, although they can go to the country specific site. All these redirections for the country is done using GeoIP apache2 mod in order to determine the country code, which is used in a RewriteCondition to state a RewriteRule, there are some exceptions of IPs that do not do the rewrite for, basically the IPs of the developer's PCs. The site has been doing just fine, until we decided to setup varnish to give the site a boost, it really did give it a great boost, but the country specific rewrites has become buggy. What started to happen is that a russian visitor can go to myshop.com and won't be redirected, until he clicks a random link (perhaps a link not cached by varnish yet) and the user is redirected to their specific country. For that i setup mod_rpaf, and for exceptions to the rewrite rule (for the developer's ip), i used this RewriteCond %{HTTP:X-FORWARDED-FOR} !^43\.43\.43\.43, and i restarted varnish and apache2, it worked for a while, then it messed up again. And whole day i have been doing changes however i have little no clue as to what's going on, sometimes it works, and sometimes it doesn't, and sometimes it half works, etc... As for geoip, i used a php to check the $_SERVER variable, and here is the general idea of the output [HTTP_X_FORWARDED_FOR] => 43.43.43.44 [HTTP_X_VARNISH] => 1705675599 [SERVER_ADDR] => 127.0.0.1 [SERVER_PORT] => 80 [REMOTE_ADDR] => 43.43.43.44 [GEOIP_ADDR] => 43.43.43.44 [GEOIP_CONTINENT_CODE] => EU [GEOIP_COUNTRY_CODE] => FR [GEOIP_COUNTRY_NAME] => France Now, thanks to the "random" redirects, i hardly have a clue as to what is going on, so can you guys please give me some ideas as to what tools to use to debug this? I have tried to see the redirect logs, but they really dont show much, and varnishlog isn't helping much either - although i must admit i am no professional at varnish. I believe the problem is with varnish trying to cache the url, and thus apache redirects are not being done properly, however visits the site first has a redirect, and based on that other users are served the content, depending on from where the user was when the cache was last updated, is it correct? if so, how can i solve the problem? Also, i have the option of using geoip redirects on varnish3 instead of using apache2 to do the redirects, is that what the best practice is? Any suggestion as to debugging this or to fix this would be helpful! thnx!

  Read the article

• Making hosts accessible between LAN subnets

  - by nixnotwin

  I have two inerfaces on my router with tomato firmwre: br0 and vlan4. br0 is on 192.168.0.0/16 subnet and vlan4 on 10.0.1.0/24 subnet. As I don't want the different network services on br0 available on vlan4, I have added this firewall rule: iptables -I INPUT -i vlan4 -j ACCEPT; iptables -I FORWARD -i vlan4 -o vlan2 -m state --state NEW -j ACCEPT; iptables -I FORWARD -i br0 -o vlan4 -j DROP; vlan2 is my WAN (internet acess). The issue that I want to solve is that I want to make one host from 192.168.0.0/16 network (br0), which has ip 192.168.0.50, available on vlan4 (10.0.1.0/24). Only that host should be available on vlan4 (and all other hosts on br0 should be inaccessible). What firewall rules can be used to do it? Edit 1: Output of iptables -nvL FORWARD: Chain FORWARD (policy DROP 4 packets, 204 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- vlan4 192.168.0.50 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT all -- vlan4 ppp0 0.0.0.0/0 0.0.0.0/0 state NEW 229 13483 ACCEPT all -- vlan4 vlan2 0.0.0.0/0 0.0.0.0/0 state NEW 0 0 DROP all -- br0 vlan3 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT all -- vlan3 ppp0 0.0.0.0/0 0.0.0.0/0 state NEW 67 3405 ACCEPT all -- vlan3 vlan2 0.0.0.0/0 0.0.0.0/0 state NEW 0 0 ACCEPT all -- br0 br0 0.0.0.0/0 0.0.0.0/0 34 1360 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID 758 40580 TCPMSS tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x02 TCPMSS clamp to PMTU 11781 2111K restrict all -- * vlan2 0.0.0.0/0 0.0.0.0/0 26837 19M ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 wanin all -- vlan2 * 0.0.0.0/0 0.0.0.0/0 287 15927 wanout all -- * vlan2 0.0.0.0/0 0.0.0.0/0 283 15723 ACCEPT all -- br0 * 0.0.0.0/0 0.0.0.0/0 0 0 upnp all -- vlan2 * 0.0.0.0/0 0.0.0.0/0 Output of iptables -t nat -nvL PREROUTING: Chain PREROUTING (policy ACCEPT 6887 packets, 526K bytes) pkts bytes target prot opt in out source destination 855 83626 WANPREROUTING all -- * * 0.0.0.0/0 222.228.137.223 0 0 DROP all -- vlan2 * 0.0.0.0/0 192.168.0.0/16 0 0 DNAT udp -- * * 192.168.0.0/16 !192.168.0.0/16 udp dpt:53 to:192.168.0.1

  Read the article

• broken apache .htaccess (mod_rewrite)

  - by Tim

  Hey there, I'm running into an apache mod_rewrite configuration issue on one of our machines. Has anyone encountered / overcome anyone of these issues. URL1 ( http://www.uppereast.com ) is not being redirected to URL2 ( http://www.nyclocalliving.com ). This definitely worked in my test environment where a localhost address was rewritten to URL2 ( RewriteRule ^http://upe.localhost$ http://www.nyclocalliving.com ). I'm trying to get the all of the redirect rules working ( 2200 + ), but the 'http://www.nyclocalliving.com' site encounters a server error if I use more that 1000 or more rules. A) .htaccess file - I've tried the simplest approach which worked in a local environment 75 # Various rewrite rules. 76 <IfModule mod_rewrite.c> 77 RewriteEngine on 78 79 # BEGIN new URL Mapping rules 80 #RewriteRule ^http://www.uppereast.com/$ http://www.nyclocalliving.com ... 2307 #RewriteRule ^http://www.uppereast.com/zipcodechange.html$ http://www.nyclocalliving.com/zip-code-change fig. 1 B) /var/log/httpd/error_log file - there are these seg. fault errors when I enable the first rule ( line 80 ). no error logs otherwise. 1893 [Fri Sep 25 17:53:46 2009] [notice] Digest: generating secret for digest authentication ... 1894 [Fri Sep 25 17:53:46 2009] [notice] Digest: done 1895 [Fri Sep 25 17:53:46 2009] [notice] Apache/2.2.3 (CentOS) configured -- resuming normal operations 1896 [Fri Sep 25 17:53:47 2009] [notice] child pid 29774 exit signal Segmentation fault (11) 1897 [Fri Sep 25 17:53:47 2009] [notice] child pid 29775 exit signal Segmentation fault (11) 1898 [Fri Sep 25 17:53:47 2009] [notice] child pid 29776 exit signal Segmentation fault (11) 1899 [Fri Sep 25 17:53:47 2009] [notice] child pid 29777 exit signal Segmentation fault (11) 1900 [Fri Sep 25 17:53:47 2009] [notice] child pid 29778 exit signal Segmentation fault (11) 1901 [Fri Sep 25 17:53:47 2009] [notice] child pid 29779 exit signal Segmentation fault (11) fig. 2 C) Some more debug information from the shell; the mod_rewrite is turned on and this is the machine architecture 1 # apachectl -t -D DUMP_MODULES | more 2 Loaded Modules: 3 core_module (static) 4 ... 5 rewrite_module (shared) 1 # uname -a 2 Linux RegionalWeb 2.6.24-23-xen #1 SMP Mon Jan 26 03:09:12 UTC 2009 x86_64 x86_64 x86_64 GNU/Linux fig. 3 I looked into some previous posts (http://serverfault.com/questions/18744/htaccess-not-working-modrewrite), but didn't find a solution for this. I'm sure there's a small switch somewhere that I'm missing. Thanks in advance Tim

  Read the article

• Amusing or Sad? Network Solutions

  - by dbasnett

  When I got sick my email ended up in every drug sellers email list. Some days I get over 200 emails selling everything from Viagra to Xanax. Either they don't know what my condition is or they are telling me you are a goner, might as well chill-ax and have a good time. In order to cut down on the mail being downloaded I thought I would add all of the Junk email senders from Outlook to my Network Solution mail server. Much to my amazement I could not find that import Spammers button, so I submitted a tech support request. Here is the response: Thank you for contacting Network Solutions Customer Service Department. We are committed to creating the best Customer experience possible. One of the first ways we can demonstrate our commitment to this goal is to quickly and efficiently handle your recent request. We apologize for any inconvenience this might have caused you. With regard to your concern, please be advised that we cannot import blocked senders in to you e-mail servers. An alternative option is for you to create a Custom Filter that filters unwanted e-mails. To create a Custom Filter: Open a Web browser (e.g., Netscape, Microsoft Internet Explorer, etc.). Type mail.[domain name].[ext] in the address line. Login to your Network Solutions email account. Click on the Configuration left menu tab. Click on the Custom Filter link. Type the rule name. blah, blah, blah Basically add them one at a time. "We are committed to creating the best Customer experience possible." No you are not. You are trying to squeeze every nickle you can out of me. "With regard to your concern, please be advised that we cannot import blocked senders in to you e-mail servers." Maybe I should apply for a job to write those ten complicated lines of code... Maybe I should question my choice of vendors, because if they truly "cannot" then they are to stupid to have my business. It is both amusing and sad. I'll be posting this in every forum I am a member of.

  Read the article

• Flickering issue in external monitor when used with Acer Aspire One D260 netbook (Intel GMA 3150)

  - by seyenne

  I recently purchased a Acer netbook, Aspire One D260. It runs flawlessly. Yesterday I bought a Samsung 23" TFT with a native resolution of 1920x1080. According to the information found in the internet and my local computer dealer, the Intel chipset can handle the native resolution of the monitor. However, this is only partly the case. I use the VGA cable to connect, the monitor instantly switches to the native resolution and now the problem: Occasionally, especially the first 2 hours after booting up, I have a flickering all over the screen, sometimes the entire screen is shaking and spinning around like crazy. I figured out that lowering the resolution avoids the flicker but this helps only for some time. I can rule out that it's the monitor's problem since I found no issues with another notebook. Right now, I have no problems with the netbook, for about 30 minutes I didn't experience any issues... But I don't know for how long, it occurs without warning :-) I'm worried that if I would bring the netbook back to the dealer and explain my problem, after testing it on an external screen in the local shop, everything works just fine... And I won't get helped with the problem because I can't prove it. (I'm currently in Thailand and over here, customer service is nothing like back home in Germany) What can I do? Is this a driver related issue? (I installed the latest GPU driver) Is it because of the VGA cable? (But why does it work sometimes without any problems and with no issues on the other notebook) I monitored the GPU/CPU temperature, nothing changes really over time.. Can it simply be a faulty GPU and is a replacement justifiable? I'm really stressed now because for the time I'm writing, the flickering didn't occur... but for sure, soon or later it will happen again.. I forgot to mention, the problem also happens if the netbook runs on battery, unplugged. So the only hardware that is plugged is the TFT screen. ...........and here it comes again, flickering has just begun. NEED HELP! Thank you all for reading through this and giving any suggestions if possible. Cheers

  Read the article

• AWS EC2 instance not pingable or available in browser

  - by Slimmons

  I've seen this questions asked other places, but now I've run through every fix proposed in other questions so I'm re asking it here, in hopes that someone will have a different solution. Problem: I have a EC2 instance, and I can ssh into it and work on it, and I have a Elastic ip set to it. I am unable to ping this machine, or log in to it using my browser. Solutions mentioned and tried: service httpd start i. response I get is "unrecognized service" ii. when I run apache2ctl -k start, it shows "httpd already running", so I'm assuming httpd is not the problem, it's just possibly named something else because of apache2, or for whatever reason. I went into EC2-Security Group- Default (which is the one I used.)-inbound, and everything there is set up correctly (I'm assuming). There it shows 80(HTTP) 0.0.0.0/0. 443(HTTPS) 0.0.0.0/0, and various other servies with their ports and 0.0.0.0/0 next to them. I also enabled a rule for enabling ICMP Request All on 0.0.0.0/0 temporarily for testing purposes I've tried disabling the iptables with "service ufw stop" Just in case I'm doing something really stupid, because I'm not all that used to connecting to web servers that I've spun up, I'm typing in the address to the machine into the url like this (assuming my ip address was ip.address). i. http:/(slash)ip.address/ ii. ip.address iii. https:/(slash)ip.address/ iv. ip.address/webFolderName/ v. http:/(slash)ip.address/webFolderName/ None of the attempts worked, and the only thing I haven't tried that i've seen is to start wireshark on the machine, and see if the requests are reaching it, and it's just ignoring them. I'm not sure I want to do that yet, since A). I'm not 100% positive how to use wireshark without the gui, since it's the only way I've ever used it (I really should get used to it in terminal, but I didn't even know you could). B). It really seems like I'm missing something simple in getting this to work. Thanks in advance for any help.

  Read the article

< Previous Page | 365 366 367 368 369 370 371 372 373 374 375 376  | Next Page >