Search Results

Search found 11512 results on 461 pages for 'usb mass storage'.

Page 369/461 | < Previous Page | 365 366 367 368 369 370 371 372 373 374 375 376  | Next Page >

• Dual boot UEFI Windows 7 and Ubuntu 12.04 (both 64 bits). W7 entry doesn't appear in GRUB

  - by Joe

  After trying to install both OS during 2 days, I'm confused and getting mad... I have SSD 128 GB and HDD 500 GB both empty. My laptop is Asus K55VM. BIOS support UEFI. What I have done: Install new SSD (Samsung 830 128GB) Use GParted on liveCD to create new table of partitions (GPT) and create 3 partitions (in the SSD) for different purposes: Partition 1: 80 GB (w7); Partition 2: 30 GB (Ubuntu 12.04 -Just / -); Partition 3: 10 GB unused (for future extesion of the other partitions) Install Windows 7 (with UEFI) in Partition 1. This create: /dev/sda1 - 100 MB for System (UEFI boot I guess) - FAT32 /dev/sda2 - 100 MB aprox. for MSR /dev/sda3 - 79.800 MB aprox. for Windows7 data In this point everything works fine. I have W7. Now I install Ubuntu 12.04 amd64 (with UEFI) as follows: Install / in Partition 2 - /dev/sda4 30 GB ext4, and in the hdd I install /home and swap. I select bootloader in /dev/sda1 (where it's supposed to be the UEFI boot). I install updates and reboot. Problem: Now just appears grub menu with Ubuntu entries and not Windows 7. Alternative solution found: When I turn on laptop, before loading GRUB I press ESC key and appear BIOS boot, so I can select to boot the Windows partition, Ubuntu partition, DVD, USB, etc... but I think is not the best way to boot different OS. I've tried: sudo update-grub2 with no success. What can I do??

  Read the article

• Creating deterministic key pairs in javascript for use in encrypting/decrypting/signing messages

  - by SlickTheNick

  So I have been searching everywhere and havn't been able to find anything with the sufficient information I need.. so Im a bit stumped on this one at the moment What I am trying to do is create a public/private key pair (like PGP) upon a users account creation, based on their passphrase and a random seed. The public key would be saved on the server, and ideally the private key would never be seen by the server whatsoever. The user could then sign in, and send a message to another user. Before the message is sent, the senders key pair would be re-generated on the fly based on their credentials (and maybe a password prompt) and used to encrypt the message. The receiver would then use their own re-generated private key to decrypt said message. The server itself should never see any plaintext passwords, private keys or readable messages. Bit unsure how on how I could go about implementing this. Iv been looking into PGP, specifically openPGP.js. The main trouble I am having is being able to regenerate the key-pair based off a specific seed. PGP seems to have a random output even if the inputs are the same. Storing the private key in a cookie or in HTML5 storage or something also isnt really an option, too unreliable. Can anyone point me in the right direction?

  Read the article

• how to get wireless to work on my HP Compaq nx6325 Notebook on 12.04

  - by user211487

  When my laptop ran XP, the wireless worked perfectly. Now the only way I get internet is having it wired in my living room - which is MASSIVELY inconvenient for me seeing as my room is outside. I have downloaded the driver from 'Additional Drivers', reset my computer (with difficulty, it also doesn't seem to like turning off, so I have to 'kill' it) and still nothing! I have looked all over the internet trying to find solutions but I just cant seem to get it to work. I have a USB wireless stick but I can't load the driver from the CD. I got this comment on a previous question: "Using either Snaptic Package Manager or Ubuntu's own Software Centre, remove "bcmwl-kernel-source" if it's already installed. Next, search for "firmware-b43-installer” and “b43-fwcutter” and install both. Finally, running Software Sources and checking the Additional Drivers tab you should find Broadcom STA Wireless Driver that you can select, install and on reboot hopefully have wireless working ok..." Which I replied: "Right, so I tried to find/remove "bcmwl-kernel-source" but couldn't find anything. I managed to install both "firmware-b43-installer” and “b43-fwcutter” using terminal, after finding out how it worked. And lastly, I couldn't figure out how to find 'Broadcom STA Wireless Driver' - still no more additional drivers. And my wireless is still not working. My laptop has a button that turns wifi on and off and since I put Ubuntu on it, it hasn't worked. And also, my computer still doesn't seem to restart properly - it just gets stuck on the ubuntu loading screen." - hope that helps, somewhat I am VERY new to Linux, not very technical and in need of help! -Running Ubuntu 12.04 32bit on a HP Compaq nx6325 Notebook Thank you to anyone who replies, its much appreciated

  Read the article

• GRUB2 stuck at rescue console, showing "unknown filesystem" for all partitions

  - by AndiDog

  I installed Ubuntu 12.04 on my external USB drive, where I have a 700GB NTFS partition followed by the new 6GB ext4 partition and a swap partition (all primary). The GRUB MBR is also installed to the external hard disk. Since my BIOS puts the external drive as first disk when booting, I removed my internal hard disk before installation in order to avoid ordering problems. Now when I boot from the external drive, GRUB is stuck at the rescue console with the error "unknown filesystem". grub rescue> ls (hd0) (hd0,msdos3) (hd0,msdos2) (hd0,msdos1) ls (hd0,<any of them>)/ gives me "unknown filesystem", thus also "insmod normal" GRUB doesn't seem to be able to read my Linux partition as you can see above?! How can I solve this? Additional info: bootinfoscript says (this is with the internal drive in again, but that does not make a difference): Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos2)/boot/grub on this drive. sdb1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sdb2: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb3: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info:

  Read the article

• How to make a stack stable? Need help for an explicit resting contact scheme (2-dimensional)

  - by Register Sole

  Previously, I struggle with the sequential impulse-based method I developed. Thanks to jedediah referring me to this paper, I managed to rebuild the codes and implement the simultaneous impulse based method with Projected-Gauss-Seidel (PGS) iterative solver as described by Erin Catto (mentioned in the reference of the paper as [Catt05]). So here's how it currently is: The simulation handles 2-dimensional rotating convex polygons. Detection is using separating-axis test, with a SKIN, meaning closest points between two polygons is detected and determined if their distance is less than SKIN. To resolve collision, simultaneous impulse-based method is used. It is solved using iterative solver (PGS-solver) as in Erin Catto's paper. Error-correction is implemented using Baumgarte's stabilization (you can refer to either paper for this) using J V = beta/dt*overlap, J is the Jacobian for the constraints, V the matrix containing the velocities of the bodies, beta an error-correction parameter that is better be < 1, dt the time-step taken by the engine, and overlap, the overlap between the bodies (true overlap, so SKIN is ignored). However, it is still less stable than I expected :s I tried to stack hexagons (or squares, doesn't really matter), and even with only 4 to 5 of them, they would swing! Also note that I am not looking for a sleeping scheme. But I would settle if you have any explicit scheme to handle resting contacts. That said, I would be more than happy if you have a way of treating it generally (as continuous collision, instead of explicitly as a special state). Ideas I have tried: Using simultaneous position based error correction as described in the paper in section 5.3.2, turned out to be worse than the current scheme. If you want to know the parameters I used: Hexagons, side 50 (pixels) gravity 2400 (pixels/sec^2) time-step 1/60 (sec) beta 0.1 restitution 0 to 0.2 coeff. of friction 0.2 PGS iteration 10 initial separation 10 (pixels) mass 1 (unit is irrelevant for now, i modified velocity directly<-impulse method) inertia 1/1000 Thanks in advance! I really appreciate any help from you guys!! :) EDIT In response to Cholesky's comment about warm starting the solver and Baumgarte: Oh right, I forgot to mention! I do save the contact history and the impulse determined in this time step to be used as initial guess in the next time step. As for the Baumgarte, here's what actually happens in the code. Collision is detected when the bodies' closest distance is less than SKIN, meaning they are actually still separated. If at this moment, I used the PGS solver without Baumgarte, restitution of 0 alone would be able to stop the bodies, separated by a distance of ~SKIN, in mid-air! So this isn't right, I want to have the bodies touching each other. So I turn on the Baumgarte, where its role is actually to pull the bodies together! Weird I know, a scheme intended to push the body apart becomes useful for the reverse. Also, I found that if I increase the number of iteration to 100, stacks become much more stable, though the program becomes so slow. UPDATE Since the stack swings left and right, could it be something is wrong with my friction model? Current friction constraint: relative_tangential_velocity = 0

  Read the article

• Amazon EC2 vs Dedicated server at Hetzner, what's the use for EC2?

  - by C-Blu

  After searching the web I still can't find the reason to use EC2. What's the point to scale EC2? If you expect a huge burst in traffic, they say. OK, but what if you already have a couple of sites with good traffic, and for example medium reserved EC2 instance is not enough. You are paying $36.60(medium reserved for 1year) in EU(Ireland) + traffic + optional expenses for databases and S3 if you use them. Of course as some point when you are under $56.6-$66.1 you can optimize your hosting costs with Amazon EC2. But when you get at some point if purchase EX4 server from Hetzner, it will surpass your perfomance needs for a long time, before you get a massive traffic. (I am wrong?) CPU: i7-2600 Quadcore (3.4-3.8 Ghz) RAM: 16 GB HDD: 2x3 TB SATA (6 Gbit/s) - I think that disc performance of a dedicated is better then of Amazon EBS Traffic: 10 TiB in month included. This is what you get from Hetzner for $56(- 19% VAT) or $66 for EU residents. Please, tell me what's the reason to use Amazon? Which load won't a server from Hetzner take, but Amazon Auto Scaling will? The maintenance of dedicated vs EC2 is still the same? Or hardware failure at Amazon, won't ruin your EBS storage? I'm still not at the level when I need expensive hosting, but want to know beforehand, just to be sure if Amazon infrastructure is better then pure performance of Hetzner's hardware.

  Read the article

• Slightly off topic - How to Fix Sky Go Error [t6013-c1501] (and [t6000-c1501])

  - by bconlon

  Sky doesn't seem to understand what their own errors mean, so I cobbled together an understanding from some other posts and managed to get it working.When you see the error [t6013-c1501] instead of your TV programme in Sky Go, it seems to mean:'You registered a device, but then changed the hardware, so now I'm confused!'In other words, the Digital rights management (DRM) used between Sky Go and Silverlight stored an old fingerprint of your PC, but rather than recognising this and allowing you to remove the device, it just disappears from the 'Manage Devices' page.DISCLAIMER: Perform the following steps at your own risk. It worked for me, but I didn't care if it broke stuff. If you care....don't do it!So, to fix this I did the following:1. Login to Sky Go and click 'Watch live TV' from the home page. It will attempt to show Sky News and fail with the error [t6013-c1501].2. Right click on the error and you should see the Menu option 'Silverlight'. Select this and a dialog should appear. Click the 'Application Storage' tab and delete any entry that relates to sky go. Clcik OK to close the dialog.3. Open explorer and navigate to the folder C:\ProgramData\Microsoft\PlayReady4. Rename the file mspr.hds to mspr.hds.OLD5. Go back to the browser and click F5. You may need to logout/login (not sure).Note: Don't rename/delete the folder C:\ProgramData\Microsoft\PlayReady or you will get the error [t6000-c1501]. The folder must exist in order for the new file to be created by Silverlight. Techie talk:So whoever wrote the code to create a new mspr.hds file didn't write code to check the folder existed causing what I assume is a generic error t6000, probably something like:catch (Exception ex) { WriteToLog("Oops, something broke!"); }#

  Read the article

• Trying to wrap my head around class structure for domain-specific language

  - by svaha

  My work is mostly in embedded systems programming in C, and the proper class structure to pull this off eludes me. Currently we communicate via C# and Visual Basic with a large collection of servos, pumps, and sensors via a USB-to-CAN hid device. Right now, it is quite cumbersome to communicate with the devices. To read the firmware version of controller number 1 you would use: SendCan(Controller,1,ReadFirmwareVersion) or SendCan(8,1,71) This sends three bytes on the CAN bus: (8,1,71) Connected to controllers are various sensors. SendCan(Controller,1,PassThroughCommand,O2Sensor,2,ReadO2) would tell Controller number 1 to pass a command to O2 Sensor number 2 to read O2 by sending the bytes 8,1,200,16,2,0 I would like to develop a domain-specific language for this setup. Instead of commands issued like they are currently, commands would be written like this: Controller1.SendCommand.O2Sensor2.ReadO2 to send the bytes 8,1,200,16,0 What's the best way to do this? Some machines have 20 O2 Sensors, others have 5 controllers, so the numbers and types of controllers and sensors, pumps, etc. aren't static.

  Read the article

• Deleted info in Boot folder

  - by user207984

  First off, I'm using Zorin 7 OS. So my Boot folder was too full to install any new updates, I used a tutorial I found somewhere on here to remove the unneeded linux-image files, and must of also deleted the latest one as well. Now when I attempt to boot I get error: no such partition. grub rescue> I used my MultiSystem USB to install (on a separate partition) a different Linux OS (Kali) and no longer get that error, however, it will ONLY give me the option to boot Kali Linux. Here's the biggest new problem though, I used the built in option of hard drive encryption for Zorin 7 when I initially installed it, so now when I attempt to explore it (to get all my saved data which is REALLY important to me), it asks me for password for encryption. However, the password says it in not recognized, and I know it's right, I had to type it in every single day. So I either need a way to restore my Zorin 7 boot files or GRUB or whatever, so I can boot it up... or I need to know how to fix my encryption problem to save all my info.

  Read the article

• Fail to boot after installation onto ASUS PC 1015PX

  - by strugglingbadly

  My new ASUS 1015PX has the usual Windows on the SDA1 partition - 100Gb, followed by SDA2 - 15Gb - as the recovery partition for Windows, and SDA3 with 183Gb for drive D:\ for windows. ASUS uses SDA4 - 19Mb for it's own use. 11.10 on an USB will load Ubuntu on a try basis and it seems OK, but every time I attempt an install, Ubuntu quickly shuts down and the restart process begins. This repeats endlessly. I've tried 10.04 Netbook Remix but that will not boot at all with the machine reporting - unknown keyword in config file gfxboot vesamenu.c32: not a COM32R image. I've gone through the above about 6 times each with the same results. I have also tried the above with the partitioning unchanged, and using gparted, with SDA3 formatted to ext4, windows D:\ reduced to 8Gb providing a 175Gb unallocated space - all to no avail. Further information: During my attempt to load 11.10, I notice that on the page which offers 3 options of loading, the first in the list includes the statement 'install INSIDE windows...' whereas the on line help shows 'install ALONGSIDE windows...'. (my caps for emphasis) I have double checked that I am using the correct download - not the install within windows option.

  Read the article

• Touchpad and Keyboard both stop working after long uptime

  - by Sepero

  I have an Asus N53SM laptop that I leave running for several weeks at a time. I never put it in hibernate or suspend, I only close the lid when I'm not using it. After a few days or weeks of running, the touchpad and keyboard will Both lock up (at the same time) for no apparent reason. I could be just surfing the internet when it happens. The touchpad and keyboard seem to only lock up when I'm actively using the laptop (not when idle), which may mean it's related to something I press, but I'm not sure? The touchpad never locks or unlocks when Pressing FN and the designated touchpad lock key (it does not seem to work on Linux). While the touchpad and keyboard are locked, I am able to plug in my USB mouse and successfully use it to control the screen cursor. I can also remotely get into the system with vnc and ssh, everything seems to run fine there as well. No processes appear out of control. It's just the laptops physical touchpad and keyboard that are locking up. How might I go about diagnosing this problem? What system logs to look at? (anything specific to look for in them?) Perhaps I should try reloading some modules? Any thing else I should inspect?

  Read the article

• Moving to New Machine... also upgrade to 64bit. What steps?

  - by Kendor

  I am about to move to a new Lenovo X201 from current X61. Current setup has separate \home, separate swap file, also separate \Data partition. Am currently running 10.04 32 bit. Am considering running 64 bit on new machine because I will now have 8 GB of RAM. And would like to also move to 10.10. Ideally I would like preserve as much of my current setup as possible... New machine has Win7 on it, but will blow that away, as I've made a clonezilla copy of it, and will use VirtualBox for when I need Windows. Can someone suggest a good step by step for me? I'm networked to a NAS and also have plenty of external USB storage in case I need intermediary steps. So do I set up new machine first with 64bit 10.10, with partition scheme I want? then rsnyc over \home from old machine (over write target home)? Do I need to upgrade the X61 first to 10.10?

  Read the article

• Freeze on Boot WindowsXP

  - by kyle

  Ok first off I know I should have Windows 7 but i don't Its a really old computer and i'm not sure if it can run the latest OS of ubuntu but i'm trying any whay so here are my specs or what i could have gathered from the computer(viruses are every where and most of the drivers are gone) Specs OS WindowsXP(it isn't letting me know which one that is blocked) Graphics card(can't access device manger it is blocked also) graphics card is 2003-2004 era though ram 512mb last time i checked USB(Drivers Gone) Wireless Card(Drivers Gone) Lan Card(Drivers Gone) Audio(Drivers Gone) CD Drive (it runs and works but i can't check its properties that's blocked to) Computer Dell Inspiron 600m Good News I have the Driver CD for everything Bad News I Don't have the OS CD I know the Computer is trash but i want to flash it anyway and just install linux(ubuntu) The second problem is it doesn't even want to load the CD all the way it is just stuck at the Ubuntu Screen with all the bubbles orange and if i resart it just does it again. any help would be nice. EDIT: okay i tried the first comment and it said i need a firmware file from http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware the firmware is b43/ucode5.fw, b43-open/ucode5.fw is there any other way of installing this firmware without being in the Ubuntu because what I have read is I need to be in Ubuntu to do this... Thanks for all the help you are giving me i have read your comments but i don't want to wait another two hours downloading that if i can get it working on this...

  Read the article

• A Disk Read Error Occured. Press CTRL+ALT+DEL to restart

  - by darroosh

  I'm new to linux world. Just downloaded ubuntu and installed it alongside with windows 7 . In grub when I choose ubuntu, it opens with no problem, but when I try to open windows 7, this message appears: A Disk Read Error Occured. Press CTRL+ALT+DEL to restart. I googled for that problem which directed me to download a boot repair tool, when I choose : advanced options / retore MBR --> apply, then restart computer , It boot to win 7 without loading the grub menu. then I opened the live ubuntu from a USB, launched the "boot repair" again, choose : recommended repair , then restart, It returns to the first problem , grub menu appear, from which I can choose only ubuntu , but win 7 show this msg again : A Disk Read Error Occured. Press CTRL+ALT+DEL to restart. I repeated more and more with the same results ... What should I do? I created a boot info summary using the "boot repair tool" if this can help , it's in this URL.

  Read the article

• Weird Screen while booting to install, while installing and after the install...and then the "panic occured" error

  - by Klyn

  I've decided to install ubuntu but neither ubuntu or any other linux distro won't even get to the desktop screen or work after getting there. On windows 8, everything is just fine. my new video card works perfectly and I have no problem with anything about it. then when I try to boot from ubuntu with wubi or with usb everything goes like this: 1) Grub screen...no problem at all, colors are just fine everything looks okay 2) and then linux boot screen...weird background color, over the backround there are vertical stripes of red-orange dots. but on the ubuntu logo and text, there are no dots at all! -I mean its shape is perfect- 3) desktop is about the start but * vertical stripes of red colored dots are all over the unity screen*. then when I click on ubuntu's menu, it usually switches to black screen saying something about "panic occured"...and then it restarts or it gives no respond at all. problems started after putting hd 6570 video card on my asus m5a78lm-lx video card which has amd phenom II X4 processor on it. I've searched to find something but there was no similar question that's why I'm almost sure it is kind of unique. again, I'm writing on Windows 8 right now and everything works and looks perfect. so far I've updated bios and anyone knows anything to solve this?

  Read the article

• Bring on the Cheer, Oracle’s Q3 is Here

  - by Kristin Rose

  November is long gone and December is near… this must mean OPN’s Q2 Winter Wrap-Up is here! Listed below are just a few of the highlights from Oracle’s past three months… Yet another successful Oracle OpenWorld 2012 and the launch of our first ever Oracle PartnerNetwork Exchange program! Get the recap. Our exciting Java Embedded @ JavaOne event. Get the low-down here! The debut of our new Oracle Cloud programs for partners, which have already created some awesome buzz in the Channel. Check out the CRN article, and don’t forget to watch the Cloud Programs Overview video and visit our OPN Cloud Knowledge Zone! On the product front, Oracle’s Sun ZFS Storage Appliance was awarded the 2012 Tech Innovator and Enterprise App Award by CRN. Read the full article. Oracle partner, Hitachi Consulting, reached OPN’s premier Diamond Level status. Read more. Was Oracle part of your September, October or November highlights? If so, leave us a comment below, we’d love to feature your story! Also, don’t forget to share the love by re-tweeting this post on Twitter or “liking” this post on Facebook! Stay Warm, The OPN Communications Team 

  Read the article

• New whitepaper: Evolution from the Traditional Data Center to Exalogic: An Operational Perspective

  - by Javier Puerta

  IT organizations are struggling with the need to balance the day-to-day concerns of data center management against the business level requirements to deliver long-term value. This balancing act has proven difficult and inefficient: systems and application management tools are resource intensive and traditional infrastructure management architectures have developed over time on a project by project basis. These traditional management systems consist of multiple tools that require administrators to waste time performing too many steps to handle routine administrative tasks. Operational efficiency and agility in your enterprise are directly linked to the capabilities provided by the management layer across the entire stack, from the application, middleware, operating system, compute, network and storage. Only when this end to end capability is provided will we experience the full benefit of a scalable, efficient, responsive and secure datacenter. Managing Exalogic is substantially less complex and error prone than managing traditional systems built from individually sourced, multi-vendor components because Exalogic is designed to be administered and maintained as a single, integrated system (Figure 1). It is at the forefront of the industry-wide shift away from costly and inferior one-off platforms toward private clouds and Engineered Systems. Read the full whitepaper "Evolution from the Traditional Data Center to Exalogic: An Operational Perspective". Full document is available for download at the Exadata Partner Community Collaborative Workspace (for community members only - if you get an error message, please register for the Community first).

  Read the article

• New Whitepaper: Evolution from the Traditional Data Center to Exalogic: An Operational Perspective

  - by Javier Puerta

  IT organizations are struggling with the need to balance the day-to-day concerns of data center management against the business level requirements to deliver long-term value. This balancing act has proven difficult and inefficient: systems and application management tools are resource intensive and traditional infrastructure management architectures have developed over time on a project by project basis. These traditional management systems consist of multiple tools that require administrators to waste time performing too many steps to handle routine administrative tasks. Operational efficiency and agility in your enterprise are directly linked to the capabilities provided by the management layer across the entire stack, from the application, middleware, operating system, compute, network and storage. Only when this end to end capability is provided will we experience the full benefit of a scalable, efficient, responsive and secure datacenter. Managing Exalogic is substantially less complex and error prone than managing traditional systems built from individually sourced, multi-vendor components because Exalogic is designed to be administered and maintained as a single, integrated system (Figure 1). It is at the forefront of the industry-wide shift away from costly and inferior one-off platforms toward private clouds and Engineered Systems. Read the full whitepaper "Evolution from the Traditional Data Center to Exalogic: An Operational Perspective". Full document is available for download at the Exadata Partner Community Collaborative Workspace (for community members only - if you get an error message, please register for the Community first).

  Read the article

• No operating system found even when grub2 was reinstalled

  - by Cruzer

  I know there have been many variations on this question and have certainly tried to do my research. I don't really know what I'm doing so I would rather not take risks. I am trying to dual boot xubuntu and windows 7. I started out with xubuntu and just installed windows. Of course, the mbr got overwritten and windows didn't seem to recognize linux. So I booted to the live cd and rewrote the mbr. And of course, now I get the error "No Operating System Found" on startup. I have been following these tutorials to help me out. community.linuxmint.com/tutorial/view/245 unix.stackexchange.com/questions/96977/grub-wont-install ubuntuforums.org/showthread.php?t=2036730 Specifically, I ran these commands: # sdb2 is the partition with xubuntu sudo mount /dev/sdb2 /mnt # sdb1 is my boot partition sudo mount /dev/sdb1 /mnt/boot # not sure what this does, but ran it anyway... for i in /dev /dev/pts /proc /sys /run; do sudo mount -B $i /mnt$i; done sudo chroot /mnt #once chrooted grub-install /dev/sdb update-grub here's a link to my gparted https://www.dropbox.com/s/zpbbzh9z7k1l3pj/gparted.png EDIT--- didn't realize that the drive letters are different in the picture than in my code (its sda in the pic instead of sdb). I have been restarting a lot and sometimes the drive letters change and make my usb into sda.

  Read the article

• Documents stored on separate internal drive, Ubuntu doesn't notice on startup

  - by PlanoAlto

  My machine has Windows 7 Ultimate x64 and Ubuntu 12.04 LTS running side-by-side on a single hard drive with GRUB bootloader, each with 500 GB storage. I keep my personal documents on a separate 1TB hard drive so they remain isolated from any changes I make to the OS drive, but when Ubuntu starts it does not seem to notice my documents drive. While I've installed and worked with Ubuntu 12.04 Server x32 before, using it as a desktop OS is new to me. I use my documents drive for all of my personal data, including wallpapers and music, so it is imperative that Ubuntu recognize it on startup. Concerning the two specific examples: Ubuntu loads with the default blue-colored desktop instead of my desired picture of the spectacular Carina galaxy. When I right-click the desktop and select "Change Desktop Background", it wakes up from its amnesia and loads the proper background. As for my music, Rhythmbox defaults to an empty library upon reboot, forcing me to reload the settings manually each time. This gets quite tedious because I certainly can't work to my full potential without my music. The second thing I would like to address is making Ubuntu point the documents directories in ~ to their appropriate counterparts on the 1TB documents drive. I realize that this question is not new, but when I create the symbolical links, they established themselves inside the directories and did not convert the directories themselves into symbolical links. I also prefer not to move the files themselves from their current location on the 1TB drive. I believe this would also help the Rhythmbox library problem as well considering it's a default directory for the music player. Excerpt from fstab: proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sdb6 during installation UUID=057ac83e-76ad-460d-86e5-b6d46e9b1d80 / ext4 errors=remount-ro 0 1 # swap was on /dev/sdb7 during installation #UUID=1183df90-23fc-44e4-aa17-4e7c9865d5cb none swap sw 0 0 /dev/mapper/cryptswap1 none swap sw 0 0 That's enough content for one question. I really like the Ubuntu experience so far since it doesn't treat me like an idiot out of the box (can't say the same for Windows) so I can't wait to hear from the community! Thanks for your help in advance.

  Read the article

• Process that needs a volume starting before volume mounts

  - by user36126

  The destination for incoming CrashPlan backups on my server (11.04) is /media/SeagateBig (SeagateBig is the volume name of my 2TB USB drive). When the server boots, two things happen: 1) SeagateBig auto-mounts and 2) CrashPlan starts. The problem is, that often these two things don't happen in that order. Then I get: Crashplan starts looks for /media/SeagateBig doesn't find it instead of waiting for it, CREATES IT Now it's backing up onto my / filesystem. NOT COOL. Meanwhile, when SeagateBig finally gets around to mounting, it finds that /media/SeagateBig already exists, shrugs, and creates /media/SeagateBig_ as its mount point. What I need is a way for the order to be enforced - where SeagateBig mounts and then and only then the CrashPlan service is started. Unless I learn that CrashPlan can be told to wait for its destination directory, never to create it... which I am also investigating. But the CrashPlanEngine script is installed by the product so I am loath to modify it, as I know I could by having it loop until df greps successfully for "SeagateBig".

  Read the article

• Kubuntu 11.10 Lot of Networking problems

  - by Cobraone

  Since I upgrade to 11.10 I have a lot of problems with KDE. First of all there are problems in configuring a static IP address. Just to explain @home I have a normal fiber ADSL and I use a DHCP. When I go to a customer I must insert a static IP address. With ifconfig everything seems ok but there is something wrong in searching DNS names. (I have installed Ubuntu and was going ok again). Now I Have reinstalled again Kubuntu 11.10 and I have the same problem in addition today I have discovered that if I connect to a network in another customer office the desktop freezes and I could only switch between windows with alt+tab. No FN key or right click to open run command works. So i unplugged network (configuration is just DHCP here) and tried on another position in office. It was the same. My Laptop freezes when connected, a fedora 14 of a friend works. So I decided to connect my Galaxy S II as USB network device. Everything is ok for like 3 minutes. When I noticed a little loss of signal again the desktop freezes and i must work (like now) just switching between windows with alt+tab). Additional information: Unplugging network or restarting it via Konsole does not not solve the freezing problem. Every time I must open a console and reboot. Any idea of what tests to do ? Just a recommendation: If I must post here logs or something else please guide me. I use Linux since Ubuntu 9 but I am not an "expert".

  Read the article

• How to connect MTS MBlaze

  - by murali_ma

  i have installed ubuntu 11.04 inside the windows xp. i have MTS Mblaze USB Modem. (my service provider is MTS MBlaze,india) i want to use Mblaze into ubuntu so that i did the following steps for make connecting the device. from the task bar->edit connections->mobile broadband->choose country->mts mblaze and ok i give username and password ([email protected] and password MTS. ok now i enable mobile broadband , MTS MBlaze connection1(connection name) from task bar. steps followed from "http://randomshandom.wordpress.com/2010/12/20/how-to-connect-mts-mblaze-device-in-ubuntu-10-10-11-04/#more-3" for the first time it successfully connected and browse the internet. after i restart the system i connect it. it does not connected. it shows Modem network disconnected. i accessed many times and delete the connection and recreated but i does not help me. if i try to connect device i think it the search the network, i saw the wave signal. img Image for showing problem:

  Read the article

• How can I fix the #c3284d# malvertising hack on my website?

  - by crm

  For the past couple of weeks at semi regular intervals, this website has had the #c3284d# malware code inserted into some of its .php files. Also the .htaccess file had its equivelant code inserted. I have, on many occasions removed the malicious code, replaced files, changed the ftp password on my ftp client (which is CoreFTP), changed the connection method to FTPS for more secure storage of the password (instead of plain text). I have also scanned my computer several times using AVG and Windows Defender which have found no malware on my computer which might have been storing my ftp passwords. I used Sucuri SiteCheck to check my website which says my website is clean of malware which is bizarre because I just attempted to click one of the links on the site a minute ago and it linked me to another one of these random stats.php sites, even though it appears I have gotten rid of the #c3284d# code again (which will no doubt be re-inserted somehow in an hour or so).. Has anyone found an actual viable solution for this malware hack? I have done just about all of the things suggested here and here and the problem still persists. Currently when I click on a link within the sites navigation menu within Google Chrome I get googles Malware warning page: Warning: Something's Not Right Here! oxsanasiberians.com contains malware. Your computer might catch a virus if you visit this site. Google has found that malicious software may be installed onto your computer if you proceed. If you've visited this site in the past or you trust this site, it's possible that it has just recently been compromised by a hacker. You should not proceed. Why not try again tomorrow or go somewhere else? We have already notified oxsanasiberians.com that we found malware on the site. For more about the problems found on oxsanasiberians.com, visit the Google Safe Browsing diagnostic page. I'm wondering if it is possible that the Google Chrome browser I am using has itself been hacked? Does anyone else get re-directed when clicking links on the the website?

  Read the article

• Dell Powerdge840 2.4GHz 64 bit quad core

  - by newb64bit

  I am having an issue, where I have changed the boot order to cdrom and turned off hd boot all together and still my system is unable to detect ubuntu and claims, no boot device found. Some additional information: When this same cd is inserted and dell is booted into win 2003 server (which is what is installed on this machine), it detects the cd drive but not the cd at all (keeps asking me to insert disc) I have also created a bootable flash drive using LinuxLive USB creator and when this is selected in boot order again am told no boot device detected. I was speaking to dell and they suggested perhaps there are no drivers on the actual ubuntu installation for the hardware on this Dell and hence the failure of this dell to detect the ubuntu cd. Now, I don't know too much about computers, but this last bit confused me a bit. If the system detects the hardware (when it is booting it sees the cd rom and in bios it sees when the flash drive is connected), then shouldn't it be able to read what is on those drives? However, if there is some firmware or software install that needs to happen, could someone please tell me where to find the correct drivers for ubuntu and dell poweredge to work together? Shall I be installing the desktop version or the server edition, also, 32 bit or 63 bit? Thank you in advance.

  Read the article

< Previous Page | 365 366 367 368 369 370 371 372 373 374 375 376  | Next Page >